1 files changed, 0 insertions, 276 deletions
diff --git a/arch/ppc/boot/simple/misc-embedded.c b/arch/ppc/boot/simple/misc-embedded.c
deleted file mode 100644
index d5a00eb0e4e..00000000000
--- a/arch/ppc/boot/simple/misc-embedded.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- * Originally adapted by Gary Thomas.  Much additional work by
- * Cort Dougan <cort@fsmlabs.com>.  On top of that still more work by
- * Dan Malek <dmalek@jlc.net>.
- *
- * Currently maintained by: Tom Rini <trini@kernel.crashing.org>
- */
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <asm/bootinfo.h>
-#include <asm/mmu.h>
-#include <asm/page.h>
-#include <asm/residual.h>
-#if defined(CONFIG_4xx)
-#include <asm/ibm4xx.h>
-#elif defined(CONFIG_8xx)
-#include <asm/mpc8xx.h>
-#elif defined(CONFIG_8260)
-#include <asm/mpc8260.h>
-#endif
-
-#include "nonstdio.h"
-
-/* The linker tells us where the image is. */
-extern char __image_begin, __image_end;
-extern char __ramdisk_begin, __ramdisk_end;
-extern char _end[];
-
-/* Because of the limited amount of memory on embedded, it presents
- * loading problems.  The biggest is that we load this boot program
- * into a relatively low memory address, and the Linux kernel Bss often
- * extends into this space when it get loaded.  When the kernel starts
- * and zeros the BSS space, it also writes over the information we
- * save here and pass to the kernel (usually board info).
- * On these boards, we grab some known memory holes to hold this information.
- */
-char cmd_buf[256];
-char *cmd_line = cmd_buf;
-char *avail_ram;
-char *end_avail;
-char *zimage_start;
-
-/* This is for 4xx treeboot.  It provides a place for the bootrom
- * give us a pointer to a rom environment command line.
- */
-char *bootrom_cmdline = "";
-
-/* This is the default cmdline that will be given to the user at boot time..
- * If none was specified at compile time, we'll give it one that should work.
- * -- Tom */
-#ifdef CONFIG_CMDLINE_BOOL
-char compiled_string[] = CONFIG_CMDLINE;
-#endif
-char ramroot_string[] = "root=/dev/ram";
-char netroot_string[] = "root=/dev/nfs rw ip=on";
-
-/* Serial port to use. */
-unsigned long com_port;
-
-/* We need to make sure that this is before the images to ensure
- * that it's in a mapped location. - Tom */
-bd_t hold_resid_buf __attribute__ ((__section__ (".data.boot")));
-bd_t *hold_residual = &hold_resid_buf;
-
-extern unsigned long serial_init(int chan, bd_t *bp);
-extern void serial_close(unsigned long com_port);
-extern unsigned long start;
-extern void flush_instruction_cache(void);
-extern void gunzip(void *, int, unsigned char *, int *);
-extern void embed_config(bd_t **bp);
-
-/* Weak function for boards which don't need to build the
- * board info struct because they are using PPCBoot/U-Boot.
- */
-void __attribute__ ((weak))
-embed_config(bd_t **bdp)
-{
-}
-
-unsigned long
-load_kernel(unsigned long load_addr, int num_words, unsigned long cksum, bd_t *bp)
-{
-	char *cp, ch;
-	int timer = 0, zimage_size;
-	unsigned long initrd_size;
-
-	/* First, capture the embedded board information.  Then
-	 * initialize the serial console port.
-	 */
-	embed_config(&bp);
-#if defined(CONFIG_SERIAL_CPM_CONSOLE) || \
-    defined(CONFIG_SERIAL_8250_CONSOLE) || \
-    defined(CONFIG_SERIAL_UARTLITE_CONSOLE)
-	com_port = serial_init(0, bp);
-#endif
-
-	/* Grab some space for the command line and board info.  Since
-	 * we no longer use the ELF header, but it was loaded, grab
-	 * that space.
-	 */
-#ifdef CONFIG_MBX
-	/* Because of the way the MBX loads the ELF image, we can't
-	 * tell where we started.  We read a magic variable from the NVRAM
-	 * that gives us the intermediate buffer load address.
-	 */
-	load_addr = *(uint *)0xfa000020;
-	load_addr += 0x10000;		/* Skip ELF header */
-#endif
-	/* copy board data */
-	if (bp)
-		memcpy(hold_residual,bp,sizeof(bd_t));
-
-	/* Set end of memory available to us.  It is always the highest
-	 * memory address provided by the board information.
-	 */
-	end_avail = (char *)(bp->bi_memsize);
-
-	puts("\nloaded at:     "); puthex(load_addr);
-	puts(" "); puthex((unsigned long)(load_addr + (4*num_words))); puts("\n");
-	if ( (unsigned long)load_addr != (unsigned long)&start ) {
-		puts("relocated to:  "); puthex((unsigned long)&start);
-		puts(" ");
-		puthex((unsigned long)((unsigned long)&start + (4*num_words)));
-		puts("\n");
-	}
-
-	if ( bp ) {
-		puts("board data at: "); puthex((unsigned long)bp);
-		puts(" ");
-		puthex((unsigned long)((unsigned long)bp + sizeof(bd_t)));
-		puts("\nrelocated to:  ");
-		puthex((unsigned long)hold_residual);
-		puts(" ");
-		puthex((unsigned long)((unsigned long)hold_residual + sizeof(bd_t)));
-		puts("\n");
-	}
-
-	/*
-	 * We link ourself to an arbitrary low address.  When we run, we
-	 * relocate ourself to that address.  __image_being points to
-	 * the part of the image where the zImage is. -- Tom
-	 */
-	zimage_start = (char *)(unsigned long)(&__image_begin);
-	zimage_size = (unsigned long)(&__image_end) -
-			(unsigned long)(&__image_begin);
-
-	initrd_size = (unsigned long)(&__ramdisk_end) -
-		(unsigned long)(&__ramdisk_begin);
-
-	/*
-	 * The zImage and initrd will be between start and _end, so they've
-	 * already been moved once.  We're good to go now. -- Tom
-	 */
-	puts("zimage at:     "); puthex((unsigned long)zimage_start);
-	puts(" "); puthex((unsigned long)(zimage_size+zimage_start));
-	puts("\n");
-
-	if ( initrd_size ) {
-		puts("initrd at:     ");
-		puthex((unsigned long)(&__ramdisk_begin));
-		puts(" "); puthex((unsigned long)(&__ramdisk_end));puts("\n");
-	}
-
-	/*
-	 * setup avail_ram - this is the first part of ram usable
-	 * by the uncompress code.  Anything after this program in RAM
-	 * is now fair game. -- Tom
-	 */
-	avail_ram = (char *)PAGE_ALIGN((unsigned long)_end);
-
-	puts("avail ram:     "); puthex((unsigned long)avail_ram); puts(" ");
-	puthex((unsigned long)end_avail); puts("\n");
-	puts("\nLinux/PPC load: ");
-	cp = cmd_line;
-	/* This is where we try and pick the right command line for booting.
-	 * If we were given one at compile time, use it.  It Is Right.
-	 * If we weren't, see if we have a ramdisk.  If so, thats root.
-	 * When in doubt, give them the netroot (root=/dev/nfs rw) -- Tom
-	 */
-#ifdef CONFIG_CMDLINE_BOOL
-	memcpy (cmd_line, compiled_string, sizeof(compiled_string));
-#else
-	if ( initrd_size )
-		memcpy (cmd_line, ramroot_string, sizeof(ramroot_string));
-	else
-		memcpy (cmd_line, netroot_string, sizeof(netroot_string));
-#endif
-	while ( *cp )
-		putc(*cp++);
-	while (timer++ < 5*1000) {
-		if (tstc()) {
-			while ((ch = getc()) != '\n' && ch != '\r') {
-				if (ch == '\b' || ch == '\177') {
-					if (cp != cmd_line) {
-						cp--;
-						puts("\b \b");
-					}
-				} else if (ch == '\030'		/* ^x */
-					   || ch == '\025') {	/* ^u */
-					while (cp != cmd_line) {
-						cp--;
-						puts("\b \b");
-					}
-				} else {
-					*cp++ = ch;
-					putc(ch);
-				}
-			}
-			break;  /* Exit 'timer' loop */
-		}
-		udelay(1000);  /* 1 msec */
-	}
-	*cp = 0;
-	puts("\nUncompressing Linux...");
-
-	gunzip(0, 0x400000, zimage_start, &zimage_size);
-	flush_instruction_cache();
-	puts("done.\n");
-	{
-		struct bi_record *rec;
-		unsigned long initrd_loc = 0;
-		unsigned long rec_loc = _ALIGN((unsigned long)(zimage_size) +
-				(1 << 20) - 1, (1 << 20));
-		rec = (struct bi_record *)rec_loc;
-
-		/* We need to make sure that the initrd and bi_recs do not
-		 * overlap. */
-		if ( initrd_size ) {
-			initrd_loc = (unsigned long)(&__ramdisk_begin);
-			/* If the bi_recs are in the middle of the current
-			 * initrd, move the initrd to the next MB
-			 * boundary. */
-			if ((rec_loc > initrd_loc) &&
-					((initrd_loc + initrd_size)
-					 > rec_loc)) {
-				initrd_loc = _ALIGN((unsigned long)(zimage_size)
-						+ (2 << 20) - 1, (2 << 20));
-			 	memmove((void *)initrd_loc, &__ramdisk_begin,
-					 initrd_size);
-		         	puts("initrd moved:  "); puthex(initrd_loc);
-			 	puts(" "); puthex(initrd_loc + initrd_size);
-			 	puts("\n");
-			}
-		}
-
-		rec->tag = BI_FIRST;
-		rec->size = sizeof(struct bi_record);
-		rec = (struct bi_record *)((unsigned long)rec + rec->size);
-
-		rec->tag = BI_CMD_LINE;
-		memcpy( (char *)rec->data, cmd_line, strlen(cmd_line)+1);
-		rec->size = sizeof(struct bi_record) + strlen(cmd_line) + 1;
-		rec = (struct bi_record *)((unsigned long)rec + rec->size);
-
-		if ( initrd_size ) {
-			rec->tag = BI_INITRD;
-			rec->data[0] = initrd_loc;
-			rec->data[1] = initrd_size;
-			rec->size = sizeof(struct bi_record) + 2 *
-				sizeof(unsigned long);
-			rec = (struct bi_record *)((unsigned long)rec +
-					rec->size);
-		}
-
-		rec->tag = BI_LAST;
-		rec->size = sizeof(struct bi_record);
-		rec = (struct bi_record *)((unsigned long)rec + rec->size);
-	}
-	puts("Now booting the kernel\n");
-#if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE)
-	serial_close(com_port);
-#endif
-
-	return (unsigned long)hold_residual;
-}