diff options
Diffstat (limited to 'arch/ppc/8xx_io/fec.c')
| -rw-r--r-- | arch/ppc/8xx_io/fec.c | 1973 |
1 files changed, 1973 insertions, 0 deletions
diff --git a/arch/ppc/8xx_io/fec.c b/arch/ppc/8xx_io/fec.c new file mode 100644 index 00000000000..0730392dcc2 --- /dev/null +++ b/arch/ppc/8xx_io/fec.c @@ -0,0 +1,1973 @@ +/* + * Fast Ethernet Controller (FEC) driver for Motorola MPC8xx. + * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) + * + * This version of the driver is specific to the FADS implementation, + * since the board contains control registers external to the processor + * for the control of the LevelOne LXT970 transceiver. The MPC860T manual + * describes connections using the internal parallel port I/O, which + * is basically all of Port D. + * + * Includes support for the following PHYs: QS6612, LXT970, LXT971/2. + * + * Right now, I am very wasteful with the buffers. I allocate memory + * pages and then divide them into 2K frame buffers. This way I know I + * have buffers large enough to hold one frame within one buffer descriptor. + * Once I get this working, I will use 64 or 128 byte CPM buffers, which + * will be much more memory efficient and will easily handle lots of + * small packets. + * + * Much better multiple PHY support by Magnus Damm. + * Copyright (c) 2000 Ericsson Radio Systems AB. + * + * Make use of MII for PHY control configurable. + * Some fixes. + * Copyright (c) 2000-2002 Wolfgang Denk, DENX Software Engineering. + * + * Support for AMD AM79C874 added. + * Thomas Lange, thomas@corelatus.com + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/string.h> +#include <linux/ptrace.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/spinlock.h> +#include <linux/bitops.h> +#ifdef CONFIG_FEC_PACKETHOOK +#include <linux/pkthook.h> +#endif + +#include <asm/8xx_immap.h> +#include <asm/pgtable.h> +#include <asm/mpc8xx.h> +#include <asm/irq.h> +#include <asm/uaccess.h> +#include <asm/commproc.h> + +#ifdef CONFIG_USE_MDIO +/* Forward declarations of some structures to support different PHYs +*/ + +typedef struct { + uint mii_data; + void (*funct)(uint mii_reg, struct net_device *dev); +} phy_cmd_t; + +typedef struct { + uint id; + char *name; + + const phy_cmd_t *config; + const phy_cmd_t *startup; + const phy_cmd_t *ack_int; + const phy_cmd_t *shutdown; +} phy_info_t; +#endif /* CONFIG_USE_MDIO */ + +/* The number of Tx and Rx buffers. These are allocated from the page + * pool. The code may assume these are power of two, so it is best + * to keep them that size. + * We don't need to allocate pages for the transmitter. We just use + * the skbuffer directly. + */ +#ifdef CONFIG_ENET_BIG_BUFFERS +#define FEC_ENET_RX_PAGES 16 +#define FEC_ENET_RX_FRSIZE 2048 +#define FEC_ENET_RX_FRPPG (PAGE_SIZE / FEC_ENET_RX_FRSIZE) +#define RX_RING_SIZE (FEC_ENET_RX_FRPPG * FEC_ENET_RX_PAGES) +#define TX_RING_SIZE 16 /* Must be power of two */ +#define TX_RING_MOD_MASK 15 /* for this to work */ +#else +#define FEC_ENET_RX_PAGES 4 +#define FEC_ENET_RX_FRSIZE 2048 +#define FEC_ENET_RX_FRPPG (PAGE_SIZE / FEC_ENET_RX_FRSIZE) +#define RX_RING_SIZE (FEC_ENET_RX_FRPPG * FEC_ENET_RX_PAGES) +#define TX_RING_SIZE 8 /* Must be power of two */ +#define TX_RING_MOD_MASK 7 /* for this to work */ +#endif + +/* Interrupt events/masks. +*/ +#define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */ +#define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */ +#define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */ +#define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */ +#define FEC_ENET_TXF ((uint)0x08000000) /* Full frame transmitted */ +#define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */ +#define FEC_ENET_RXF ((uint)0x02000000) /* Full frame received */ +#define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */ +#define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */ +#define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */ + +/* +*/ +#define FEC_ECNTRL_PINMUX 0x00000004 +#define FEC_ECNTRL_ETHER_EN 0x00000002 +#define FEC_ECNTRL_RESET 0x00000001 + +#define FEC_RCNTRL_BC_REJ 0x00000010 +#define FEC_RCNTRL_PROM 0x00000008 +#define FEC_RCNTRL_MII_MODE 0x00000004 +#define FEC_RCNTRL_DRT 0x00000002 +#define FEC_RCNTRL_LOOP 0x00000001 + +#define FEC_TCNTRL_FDEN 0x00000004 +#define FEC_TCNTRL_HBC 0x00000002 +#define FEC_TCNTRL_GTS 0x00000001 + +/* Delay to wait for FEC reset command to complete (in us) +*/ +#define FEC_RESET_DELAY 50 + +/* The FEC stores dest/src/type, data, and checksum for receive packets. + */ +#define PKT_MAXBUF_SIZE 1518 +#define PKT_MINBUF_SIZE 64 +#define PKT_MAXBLR_SIZE 1520 + +/* The FEC buffer descriptors track the ring buffers. The rx_bd_base and + * tx_bd_base always point to the base of the buffer descriptors. The + * cur_rx and cur_tx point to the currently available buffer. + * The dirty_tx tracks the current buffer that is being sent by the + * controller. The cur_tx and dirty_tx are equal under both completely + * empty and completely full conditions. The empty/ready indicator in + * the buffer descriptor determines the actual condition. + */ +struct fec_enet_private { + /* The saved address of a sent-in-place packet/buffer, for skfree(). */ + struct sk_buff* tx_skbuff[TX_RING_SIZE]; + ushort skb_cur; + ushort skb_dirty; + + /* CPM dual port RAM relative addresses. + */ + cbd_t *rx_bd_base; /* Address of Rx and Tx buffers. */ + cbd_t *tx_bd_base; + cbd_t *cur_rx, *cur_tx; /* The next free ring entry */ + cbd_t *dirty_tx; /* The ring entries to be free()ed. */ + + /* Virtual addresses for the receive buffers because we can't + * do a __va() on them anymore. + */ + unsigned char *rx_vaddr[RX_RING_SIZE]; + + struct net_device_stats stats; + uint tx_full; + spinlock_t lock; + +#ifdef CONFIG_USE_MDIO + uint phy_id; + uint phy_id_done; + uint phy_status; + uint phy_speed; + phy_info_t *phy; + struct tq_struct phy_task; + + uint sequence_done; + + uint phy_addr; +#endif /* CONFIG_USE_MDIO */ + + int link; + int old_link; + int full_duplex; + +#ifdef CONFIG_FEC_PACKETHOOK + unsigned long ph_lock; + fec_ph_func *ph_rxhandler; + fec_ph_func *ph_txhandler; + __u16 ph_proto; + volatile __u32 *ph_regaddr; + void *ph_priv; +#endif +}; + +static int fec_enet_open(struct net_device *dev); +static int fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev); +#ifdef CONFIG_USE_MDIO +static void fec_enet_mii(struct net_device *dev); +#endif /* CONFIG_USE_MDIO */ +static void fec_enet_interrupt(int irq, void * dev_id, struct pt_regs * regs); +#ifdef CONFIG_FEC_PACKETHOOK +static void fec_enet_tx(struct net_device *dev, __u32 regval); +static void fec_enet_rx(struct net_device *dev, __u32 regval); +#else +static void fec_enet_tx(struct net_device *dev); +static void fec_enet_rx(struct net_device *dev); +#endif +static int fec_enet_close(struct net_device *dev); +static struct net_device_stats *fec_enet_get_stats(struct net_device *dev); +static void set_multicast_list(struct net_device *dev); +static void fec_restart(struct net_device *dev, int duplex); +static void fec_stop(struct net_device *dev); +static ushort my_enet_addr[3]; + +#ifdef CONFIG_USE_MDIO +/* MII processing. We keep this as simple as possible. Requests are + * placed on the list (if there is room). When the request is finished + * by the MII, an optional function may be called. + */ +typedef struct mii_list { + uint mii_regval; + void (*mii_func)(uint val, struct net_device *dev); + struct mii_list *mii_next; +} mii_list_t; + +#define NMII 20 +mii_list_t mii_cmds[NMII]; +mii_list_t *mii_free; +mii_list_t *mii_head; +mii_list_t *mii_tail; + +static int mii_queue(struct net_device *dev, int request, + void (*func)(uint, struct net_device *)); + +/* Make MII read/write commands for the FEC. +*/ +#define mk_mii_read(REG) (0x60020000 | ((REG & 0x1f) << 18)) +#define mk_mii_write(REG, VAL) (0x50020000 | ((REG & 0x1f) << 18) | \ + (VAL & 0xffff)) +#define mk_mii_end 0 +#endif /* CONFIG_USE_MDIO */ + +/* Transmitter timeout. +*/ +#define TX_TIMEOUT (2*HZ) + +#ifdef CONFIG_USE_MDIO +/* Register definitions for the PHY. +*/ + +#define MII_REG_CR 0 /* Control Register */ +#define MII_REG_SR 1 /* Status Register */ +#define MII_REG_PHYIR1 2 /* PHY Identification Register 1 */ +#define MII_REG_PHYIR2 3 /* PHY Identification Register 2 */ +#define MII_REG_ANAR 4 /* A-N Advertisement Register */ +#define MII_REG_ANLPAR 5 /* A-N Link Partner Ability Register */ +#define MII_REG_ANER 6 /* A-N Expansion Register */ +#define MII_REG_ANNPTR 7 /* A-N Next Page Transmit Register */ +#define MII_REG_ANLPRNPR 8 /* A-N Link Partner Received Next Page Reg. */ + +/* values for phy_status */ + +#define PHY_CONF_ANE 0x0001 /* 1 auto-negotiation enabled */ +#define PHY_CONF_LOOP 0x0002 /* 1 loopback mode enabled */ +#define PHY_CONF_SPMASK 0x00f0 /* mask for speed */ +#define PHY_CONF_10HDX 0x0010 /* 10 Mbit half duplex supported */ +#define PHY_CONF_10FDX 0x0020 /* 10 Mbit full duplex supported */ +#define PHY_CONF_100HDX 0x0040 /* 100 Mbit half duplex supported */ +#define PHY_CONF_100FDX 0x0080 /* 100 Mbit full duplex supported */ + +#define PHY_STAT_LINK 0x0100 /* 1 up - 0 down */ +#define PHY_STAT_FAULT 0x0200 /* 1 remote fault */ +#define PHY_STAT_ANC 0x0400 /* 1 auto-negotiation complete */ +#define PHY_STAT_SPMASK 0xf000 /* mask for speed */ +#define PHY_STAT_10HDX 0x1000 /* 10 Mbit half duplex selected */ +#define PHY_STAT_10FDX 0x2000 /* 10 Mbit full duplex selected */ +#define PHY_STAT_100HDX 0x4000 /* 100 Mbit half duplex selected */ +#define PHY_STAT_100FDX 0x8000 /* 100 Mbit full duplex selected */ +#endif /* CONFIG_USE_MDIO */ + +#ifdef CONFIG_FEC_PACKETHOOK +int +fec_register_ph(struct net_device *dev, fec_ph_func *rxfun, fec_ph_func *txfun, + __u16 proto, volatile __u32 *regaddr, void *priv) +{ + struct fec_enet_private *fep; + int retval = 0; + + fep = dev->priv; + + if (test_and_set_bit(0, (void*)&fep->ph_lock) != 0) { + /* Someone is messing with the packet hook */ + return -EAGAIN; + } + if (fep->ph_rxhandler != NULL || fep->ph_txhandler != NULL) { + retval = -EBUSY; + goto out; + } + fep->ph_rxhandler = rxfun; + fep->ph_txhandler = txfun; + fep->ph_proto = proto; + fep->ph_regaddr = regaddr; + fep->ph_priv = priv; + + out: + fep->ph_lock = 0; + + return retval; +} + + +int +fec_unregister_ph(struct net_device *dev) +{ + struct fec_enet_private *fep; + int retval = 0; + + fep = dev->priv; + + if (test_and_set_bit(0, (void*)&fep->ph_lock) != 0) { + /* Someone is messing with the packet hook */ + return -EAGAIN; + } + + fep->ph_rxhandler = fep->ph_txhandler = NULL; + fep->ph_proto = 0; + fep->ph_regaddr = NULL; + fep->ph_priv = NULL; + + fep->ph_lock = 0; + + return retval; +} + +EXPORT_SYMBOL(fec_register_ph); +EXPORT_SYMBOL(fec_unregister_ph); + +#endif /* CONFIG_FEC_PACKETHOOK */ + +static int +fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct fec_enet_private *fep; + volatile fec_t *fecp; + volatile cbd_t *bdp; + + fep = dev->priv; + fecp = (volatile fec_t*)dev->base_addr; + + if (!fep->link) { + /* Link is down or autonegotiation is in progress. */ + return 1; + } + + /* Fill in a Tx ring entry */ + bdp = fep->cur_tx; + +#ifndef final_version + if (bdp->cbd_sc & BD_ENET_TX_READY) { + /* Ooops. All transmit buffers are full. Bail out. + * This should not happen, since dev->tbusy should be set. + */ + printk("%s: tx queue full!.\n", dev->name); + return 1; + } +#endif + + /* Clear all of the status flags. + */ + bdp->cbd_sc &= ~BD_ENET_TX_STATS; + + /* Set buffer length and buffer pointer. + */ + bdp->cbd_bufaddr = __pa(skb->data); + bdp->cbd_datlen = skb->len; + + /* Save skb pointer. + */ + fep->tx_skbuff[fep->skb_cur] = skb; + + fep->stats.tx_bytes += skb->len; + fep->skb_cur = (fep->skb_cur+1) & TX_RING_MOD_MASK; + + /* Push the data cache so the CPM does not get stale memory + * data. + */ + flush_dcache_range((unsigned long)skb->data, + (unsigned long)skb->data + skb->len); + + /* disable interrupts while triggering transmit */ + spin_lock_irq(&fep->lock); + + /* Send it on its way. Tell FEC its ready, interrupt when done, + * its the last BD of the frame, and to put the CRC on the end. + */ + + bdp->cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_INTR + | BD_ENET_TX_LAST | BD_ENET_TX_TC); + + dev->trans_start = jiffies; + + /* Trigger transmission start */ + fecp->fec_x_des_active = 0x01000000; + + /* If this was the last BD in the ring, start at the beginning again. + */ + if (bdp->cbd_sc & BD_ENET_TX_WRAP) { + bdp = fep->tx_bd_base; + } else { + bdp++; + } + + if (bdp->cbd_sc & BD_ENET_TX_READY) { + netif_stop_queue(dev); + fep->tx_full = 1; + } + + fep->cur_tx = (cbd_t *)bdp; + + spin_unlock_irq(&fep->lock); + + return 0; +} + +static void +fec_timeout(struct net_device *dev) +{ + struct fec_enet_private *fep = dev->priv; + + printk("%s: transmit timed out.\n", dev->name); + fep->stats.tx_errors++; +#ifndef final_version + { + int i; + cbd_t *bdp; + + printk("Ring data dump: cur_tx %lx%s, dirty_tx %lx cur_rx: %lx\n", + (unsigned long)fep->cur_tx, fep->tx_full ? " (full)" : "", + (unsigned long)fep->dirty_tx, + (unsigned long)fep->cur_rx); + + bdp = fep->tx_bd_base; + printk(" tx: %u buffers\n", TX_RING_SIZE); + for (i = 0 ; i < TX_RING_SIZE; i++) { + printk(" %08x: %04x %04x %08x\n", + (uint) bdp, + bdp->cbd_sc, + bdp->cbd_datlen, + bdp->cbd_bufaddr); + bdp++; + } + + bdp = fep->rx_bd_base; + printk(" rx: %lu buffers\n", RX_RING_SIZE); + for (i = 0 ; i < RX_RING_SIZE; i++) { + printk(" %08x: %04x %04x %08x\n", + (uint) bdp, + bdp->cbd_sc, + bdp->cbd_datlen, + bdp->cbd_bufaddr); + bdp++; + } + } +#endif + if (!fep->tx_full) + netif_wake_queue(dev); +} + +/* The interrupt handler. + * This is called from the MPC core interrupt. + */ +static void +fec_enet_interrupt(int irq, void * dev_id, struct pt_regs * regs) +{ + struct net_device *dev = dev_id; + volatile fec_t *fecp; + uint int_events; +#ifdef CONFIG_FEC_PACKETHOOK + struct fec_enet_private *fep = dev->priv; + __u32 regval; + + if (fep->ph_regaddr) regval = *fep->ph_regaddr; +#endif + fecp = (volatile fec_t*)dev->base_addr; + + /* Get the interrupt events that caused us to be here. + */ + while ((int_events = fecp->fec_ievent) != 0) { + fecp->fec_ievent = int_events; + if ((int_events & (FEC_ENET_HBERR | FEC_ENET_BABR | + FEC_ENET_BABT | FEC_ENET_EBERR)) != 0) { + printk("FEC ERROR %x\n", int_events); + } + + /* Handle receive event in its own function. + */ + if (int_events & FEC_ENET_RXF) { +#ifdef CONFIG_FEC_PACKETHOOK + fec_enet_rx(dev, regval); +#else + fec_enet_rx(dev); +#endif + } + + /* Transmit OK, or non-fatal error. Update the buffer + descriptors. FEC handles all errors, we just discover + them as part of the transmit process. + */ + if (int_events & FEC_ENET_TXF) { +#ifdef CONFIG_FEC_PACKETHOOK + fec_enet_tx(dev, regval); +#else + fec_enet_tx(dev); +#endif + } + + if (int_events & FEC_ENET_MII) { +#ifdef CONFIG_USE_MDIO + fec_enet_mii(dev); +#else +printk("%s[%d] %s: unexpected FEC_ENET_MII event\n", __FILE__,__LINE__,__FUNCTION__); +#endif /* CONFIG_USE_MDIO */ + } + + } +} + + +static void +#ifdef CONFIG_FEC_PACKETHOOK +fec_enet_tx(struct net_device *dev, __u32 regval) +#else +fec_enet_tx(struct net_device *dev) +#endif +{ + struct fec_enet_private *fep; + volatile cbd_t *bdp; + struct sk_buff *skb; + + fep = dev->priv; + /* lock while transmitting */ + spin_lock(&fep->lock); + bdp = fep->dirty_tx; + + while ((bdp->cbd_sc&BD_ENET_TX_READY) == 0) { + if (bdp == fep->cur_tx && fep->tx_full == 0) break; + + skb = fep->tx_skbuff[fep->skb_dirty]; + /* Check for errors. */ + if (bdp->cbd_sc & (BD_ENET_TX_HB | BD_ENET_TX_LC | + BD_ENET_TX_RL | BD_ENET_TX_UN | + BD_ENET_TX_CSL)) { + fep->stats.tx_errors++; + if (bdp->cbd_sc & BD_ENET_TX_HB) /* No heartbeat */ + fep->stats.tx_heartbeat_errors++; + if (bdp->cbd_sc & BD_ENET_TX_LC) /* Late collision */ + fep->stats.tx_window_errors++; + if (bdp->cbd_sc & BD_ENET_TX_RL) /* Retrans limit */ + fep->stats.tx_aborted_errors++; + if (bdp->cbd_sc & BD_ENET_TX_UN) /* Underrun */ + fep->stats.tx_fifo_errors++; + if (bdp->cbd_sc & BD_ENET_TX_CSL) /* Carrier lost */ + fep->stats.tx_carrier_errors++; + } else { +#ifdef CONFIG_FEC_PACKETHOOK + /* Packet hook ... */ + if (fep->ph_txhandler && + ((struct ethhdr *)skb->data)->h_proto + == fep->ph_proto) { + fep->ph_txhandler((__u8*)skb->data, skb->len, + regval, fep->ph_priv); + } +#endif + fep->stats.tx_packets++; + } + +#ifndef final_version + if (bdp->cbd_sc & BD_ENET_TX_READY) + printk("HEY! Enet xmit interrupt and TX_READY.\n"); +#endif + /* Deferred means some collisions occurred during transmit, + * but we eventually sent the packet OK. + */ + if (bdp->cbd_sc & BD_ENET_TX_DEF) + fep->stats.collisions++; + + /* Free the sk buffer associated with this last transmit. + */ +#if 0 +printk("TXI: %x %x %x\n", bdp, skb, fep->skb_dirty); +#endif + dev_kfree_skb_irq (skb/*, FREE_WRITE*/); + fep->tx_skbuff[fep->skb_dirty] = NULL; + fep->skb_dirty = (fep->skb_dirty + 1) & TX_RING_MOD_MASK; + + /* Update pointer to next buffer descriptor to be transmitted. + */ + if (bdp->cbd_sc & BD_ENET_TX_WRAP) + bdp = fep->tx_bd_base; + else + bdp++; + + /* Since we have freed up a buffer, the ring is no longer + * full. + */ + if (fep->tx_full) { + fep->tx_full = 0; + if (netif_queue_stopped(dev)) + netif_wake_queue(dev); + } +#ifdef CONFIG_FEC_PACKETHOOK + /* Re-read register. Not exactly guaranteed to be correct, + but... */ + if (fep->ph_regaddr) regval = *fep->ph_regaddr; +#endif + } + fep->dirty_tx = (cbd_t *)bdp; + spin_unlock(&fep->lock); +} + + +/* During a receive, the cur_rx points to the current incoming buffer. + * When we update through the ring, if the next incoming buffer has + * not been given to the system, we just set the empty indicator, + * effectively tossing the packet. + */ +static void +#ifdef CONFIG_FEC_PACKETHOOK +fec_enet_rx(struct net_device *dev, __u32 regval) +#else +fec_enet_rx(struct net_device *dev) +#endif +{ + struct fec_enet_private *fep; + volatile fec_t *fecp; + volatile cbd_t *bdp; + struct sk_buff *skb; + ushort pkt_len; + __u8 *data; + + fep = dev->priv; + fecp = (volatile fec_t*)dev->base_addr; + + /* First, grab all of the stats for the incoming packet. + * These get messed up if we get called due to a busy condition. + */ + bdp = fep->cur_rx; + +while (!(bdp->cbd_sc & BD_ENET_RX_EMPTY)) { + +#ifndef final_version + /* Since we have allocated space to hold a complete frame, + * the last indicator should be set. + */ + if ((bdp->cbd_sc & BD_ENET_RX_LAST) == 0) + printk("FEC ENET: rcv is not +last\n"); +#endif + + /* Check for errors. */ + if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO | + BD_ENET_RX_CR | BD_ENET_RX_OV)) { + fep->stats.rx_errors++; + if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH)) { + /* Frame too long or too short. */ + fep->stats.rx_length_errors++; + } + if (bdp->cbd_sc & BD_ENET_RX_NO) /* Frame alignment */ + fep->stats.rx_frame_errors++; + if (bdp->cbd_sc & BD_ENET_RX_CR) /* CRC Error */ + fep->stats.rx_crc_errors++; + if (bdp->cbd_sc & BD_ENET_RX_OV) /* FIFO overrun */ + fep->stats.rx_crc_errors++; + } + + /* Report late collisions as a frame error. + * On this error, the BD is closed, but we don't know what we + * have in the buffer. So, just drop this frame on the floor. + */ + if (bdp->cbd_sc & BD_ENET_RX_CL) { + fep->stats.rx_errors++; + fep->stats.rx_frame_errors++; + goto rx_processing_done; + } + + /* Process the incoming frame. + */ + fep->stats.rx_packets++; + pkt_len = bdp->cbd_datlen; + fep->stats.rx_bytes += pkt_len; + data = fep->rx_vaddr[bdp - fep->rx_bd_base]; + +#ifdef CONFIG_FEC_PACKETHOOK + /* Packet hook ... */ + if (fep->ph_rxhandler) { + if (((struct ethhdr *)data)->h_proto == fep->ph_proto) { + switch (fep->ph_rxhandler(data, pkt_len, regval, + fep->ph_priv)) { + case 1: + goto rx_processing_done; + break; + case 0: + break; + default: + fep->stats.rx_errors++; + goto rx_processing_done; + } + } + } + + /* If it wasn't filtered - copy it to an sk buffer. */ +#endif + + /* This does 16 byte alignment, exactly what we need. + * The packet length includes FCS, but we don't want to + * include that when passing upstream as it messes up + * bridging applications. + */ + skb = dev_alloc_skb(pkt_len-4); + + if (skb == NULL) { + printk("%s: Memory squeeze, dropping packet.\n", dev->name); + fep->stats.rx_dropped++; + } else { + skb->dev = dev; + skb_put(skb,pkt_len-4); /* Make room */ + eth_copy_and_sum(skb, data, pkt_len-4, 0); + skb->protocol=eth_type_trans(skb,dev); + netif_rx(skb); + } + rx_processing_done: + + /* Clear the status flags for this buffer. + */ + bdp->cbd_sc &= ~BD_ENET_RX_STATS; + + /* Mark the buffer empty. + */ + bdp->cbd_sc |= BD_ENET_RX_EMPTY; + + /* Update BD pointer to next entry. + */ + if (bdp->cbd_sc & BD_ENET_RX_WRAP) + bdp = fep->rx_bd_base; + else + bdp++; + +#if 1 + /* Doing this here will keep the FEC running while we process + * incoming frames. On a heavily loaded network, we should be + * able to keep up at the expense of system resources. + */ + fecp->fec_r_des_active = 0x01000000; +#endif +#ifdef CONFIG_FEC_PACKETHOOK + /* Re-read register. Not exactly guaranteed to be correct, + but... */ + if (fep->ph_regaddr) regval = *fep->ph_regaddr; +#endif + } /* while (!(bdp->cbd_sc & BD_ENET_RX_EMPTY)) */ + fep->cur_rx = (cbd_t *)bdp; + +#if 0 + /* Doing this here will allow us to process all frames in the + * ring before the FEC is allowed to put more there. On a heavily + * loaded network, some frames may be lost. Unfortunately, this + * increases the interrupt overhead since we can potentially work + * our way back to the interrupt return only to come right back + * here. + */ + fecp->fec_r_des_active = 0x01000000; +#endif +} + + +#ifdef CONFIG_USE_MDIO +static void +fec_enet_mii(struct net_device *dev) +{ + struct fec_enet_private *fep; + volatile fec_t *ep; + mii_list_t *mip; + uint mii_reg; + + fep = (struct fec_enet_private *)dev->priv; + ep = &(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec); + mii_reg = ep->fec_mii_data; + + if ((mip = mii_head) == NULL) { + printk("MII and no head!\n"); + return; + } + + if (mip->mii_func != NULL) + (*(mip->mii_func))(mii_reg, dev); + + mii_head = mip->mii_next; + mip->mii_next = mii_free; + mii_free = mip; + + if ((mip = mii_head) != NULL) { + ep->fec_mii_data = mip->mii_regval; + + } +} + +static int +mii_queue(struct net_device *dev, int regval, void (*func)(uint, struct net_device *)) +{ + struct fec_enet_private *fep; + unsigned long flags; + mii_list_t *mip; + int retval; + + /* Add PHY address to register command. + */ + fep = dev->priv; + regval |= fep->phy_addr << 23; + + retval = 0; + + /* lock while modifying mii_list */ + spin_lock_irqsave(&fep->lock, flags); + + if ((mip = mii_free) != NULL) { + mii_free = mip->mii_next; + mip->mii_regval = regval; + mip->mii_func = func; + mip->mii_next = NULL; + if (mii_head) { + mii_tail->mii_next = mip; + mii_tail = mip; + } else { + mii_head = mii_tail = mip; + (&(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec))->fec_mii_data = regval; + } + } else { + retval = 1; + } + + spin_unlock_irqrestore(&fep->lock, flags); + + return(retval); +} + +static void mii_do_cmd(struct net_device *dev, const phy_cmd_t *c) +{ + int k; + + if(!c) + return; + + for(k = 0; (c+k)->mii_data != mk_mii_end; k++) + mii_queue(dev, (c+k)->mii_data, (c+k)->funct); +} + +static void mii_parse_sr(uint mii_reg, struct net_device *dev) +{ + struct fec_enet_private *fep = dev->priv; + volatile uint *s = &(fep->phy_status); + + *s &= ~(PHY_STAT_LINK | PHY_STAT_FAULT | PHY_STAT_ANC); + + if (mii_reg & 0x0004) + *s |= PHY_STAT_LINK; + if (mii_reg & 0x0010) + *s |= PHY_STAT_FAULT; + if (mii_reg & 0x0020) + *s |= PHY_STAT_ANC; + + fep->link = (*s & PHY_STAT_LINK) ? 1 : 0; +} + +static void mii_parse_cr(uint mii_reg, struct net_device *dev) +{ + struct fec_enet_private *fep = dev->priv; + volatile uint *s = &(fep->phy_status); + + *s &= ~(PHY_CONF_ANE | PHY_CONF_LOOP); + + if (mii_reg & 0x1000) + *s |= PHY_CONF_ANE; + if (mii_reg & 0x4000) + *s |= PHY_CONF_LOOP; +} + +static void mii_parse_anar(uint mii_reg, struct net_device *dev) +{ + struct fec_enet_private *fep = dev->priv; + volatile uint *s = &(fep->phy_status); + + *s &= ~(PHY_CONF_SPMASK); + + if (mii_reg & 0x0020) + *s |= PHY_CONF_10HDX; + if (mii_reg & 0x0040) + *s |= PHY_CONF_10FDX; + if (mii_reg & 0x0080) + *s |= PHY_CONF_100HDX; + if (mii_reg & 0x00100) + *s |= PHY_CONF_100FDX; +} +#if 0 +static void mii_disp_reg(uint mii_reg, struct net_device *dev) +{ + printk("reg %u = 0x%04x\n", (mii_reg >> 18) & 0x1f, mii_reg & 0xffff); +} +#endif + +/* ------------------------------------------------------------------------- */ +/* The Level one LXT970 is used by many boards */ + +#ifdef CONFIG_FEC_LXT970 + +#define MII_LXT970_MIRROR 16 /* Mirror register */ +#define MII_LXT970_IER 17 /* Interrupt Enable Register */ +#define MII_LXT970_ISR 18 /* Interrupt Status Register */ +#define MII_LXT970_CONFIG 19 /* Configuration Register */ +#define MII_LXT970_CSR 20 /* Chip Status Register */ + +static void mii_parse_lxt970_csr(uint mii_reg, struct net_device *dev) +{ + struct fec_enet_private *fep = dev->priv; + volatile uint *s = &(fep->phy_status); + + *s &= ~(PHY_STAT_SPMASK); + + if (mii_reg & 0x0800) { + if (mii_reg & 0x1000) + *s |= PHY_STAT_100FDX; + else + *s |= PHY_STAT_100HDX; + } + else { + if (mii_reg & 0x1000) + *s |= PHY_STAT_10FDX; + else + *s |= PHY_STAT_10HDX; + } +} + +static phy_info_t phy_info_lxt970 = { + 0x07810000, + "LXT970", + + (const phy_cmd_t []) { /* config */ +#if 0 +// { mk_mii_write(MII_REG_ANAR, 0x0021), NULL }, + + /* Set default operation of 100-TX....for some reason + * some of these bits are set on power up, which is wrong. + */ + { mk_mii_write(MII_LXT970_CONFIG, 0), NULL }, +#endif + { mk_mii_read(MII_REG_CR), mii_parse_cr }, + { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, + { mk_mii_end, } + }, + (const phy_cmd_t []) { /* startup - enable interrupts */ + { mk_mii_write(MII_LXT970_IER, 0x0002), NULL }, + { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ + { mk_mii_end, } + }, + (const phy_cmd_t []) { /* ack_int */ + /* read SR and ISR to acknowledge */ + + { mk_mii_read(MII_REG_SR), mii_parse_sr }, + { mk_mii_read(MII_LXT970_ISR), NULL }, + + /* find out the current status */ + + { mk_mii_read(MII_LXT970_CSR), mii_parse_lxt970_csr }, + { mk_mii_end, } + }, + (const phy_cmd_t []) { /* shutdown - disable interrupts */ + { mk_mii_write(MII_LXT970_IER, 0x0000), NULL }, + { mk_mii_end, } + }, +}; + +#endif /* CONFIG_FEC_LXT970 */ + +/* ------------------------------------------------------------------------- */ +/* The Level one LXT971 is used on some of my custom boards */ + +#ifdef CONFIG_FEC_LXT971 + +/* register definitions for the 971 */ + +#define MII_LXT971_PCR 16 /* Port Control Register */ +#define MII_LXT971_SR2 17 /* Status Register 2 */ +#define MII_LXT971_IER 18 /* Interrupt Enable Register */ +#define MII_LXT971_ISR 19 /* Interrupt Status Register */ +#define MII_LXT971_LCR 20 /* LED Control Register */ +#define MII_LXT971_TCR 30 /* Transmit Control Register */ + +/* + * I had some nice ideas of running the MDIO faster... + * The 971 should support 8MHz and I tried it, but things acted really + * weird, so 2.5 MHz ought to be enough for anyone... + */ + +static void mii_parse_lxt971_sr2(uint mii_reg, struct net_device *dev) +{ + struct fec_enet_private *fep = dev->priv; + volatile uint *s = &(fep->phy_status); + + *s &= ~(PHY_STAT_SPMASK); + + if (mii_reg & 0x4000) { + if (mii_reg & 0x0200) + *s |= PHY_STAT_100FDX; + else + *s |= PHY_STAT_100HDX; + } + else { + if (mii_reg & 0x0200) + *s |= PHY_STAT_10FDX; + else + *s |= PHY_STAT_10HDX; + } + if (mii_reg & 0x0008) + *s |= PHY_STAT_FAULT; +} + +static phy_info_t phy_info_lxt971 = { + 0x0001378e, + "LXT971", + + (const phy_cmd_t []) { /* config */ +// { mk_mii_write(MII_REG_ANAR, 0x021), NULL }, /* 10 Mbps, HD */ + { mk_mii_read(MII_REG_CR), mii_parse_cr }, + { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, + { mk_mii_end, } + }, + (const phy_cmd_t []) { /* startup - enable interrupts */ + { mk_mii_write(MII_LXT971_IER, 0x00f2), NULL }, + { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ + + /* Somehow does the 971 tell me that the link is down + * the first read after power-up. + * read here to get a valid value in ack_int */ + + { mk_mii_read(MII_REG_SR), mii_parse_sr }, + { mk_mii_end, } + }, + (const phy_cmd_t []) { /* ack_int */ + /* find out the current status */ + + { mk_mii_read(MII_REG_SR), mii_parse_sr }, + { mk_mii_read(MII_LXT971_SR2), mii_parse_lxt971_sr2 }, + + /* we only need to read ISR to acknowledge */ + + { mk_mii_read(MII_LXT971_ISR), NULL }, + { mk_mii_end, } + }, + (const phy_cmd_t []) { /* shutdown - disable interrupts */ + { mk_mii_write(MII_LXT971_IER, 0x0000), NULL }, + { mk_mii_end, } + }, +}; + +#endif /* CONFIG_FEC_LXT970 */ + + +/* ------------------------------------------------------------------------- */ +/* The Quality Semiconductor QS6612 is used on the RPX CLLF */ + +#ifdef CONFIG_FEC_QS6612 + +/* register definitions */ + +#define MII_QS6612_MCR 17 /* Mode Control Register */ +#define MII_QS6612_FTR 27 /* Factory Test Register */ +#define MII_QS6612_MCO 28 /* Misc. Control Register */ +#define MII_QS6612_ISR 29 /* Interrupt Source Register */ +#define MII_QS6612_IMR 30 /* Interrupt Mask Register */ +#define MII_QS6612_PCR 31 /* 100BaseTx PHY Control Reg. */ + +static void mii_parse_qs6612_pcr(uint mii_reg, struct net_device *dev) +{ + struct fec_enet_private *fep = dev->priv; + volatile uint *s = &(fep->phy_status); + + *s &= ~(PHY_STAT_SPMASK); + + switch((mii_reg >> 2) & 7) { + case 1: *s |= PHY_STAT_10HDX; break; + case 2: *s |= PHY_STAT_100HDX; break; + case 5: *s |= PHY_STAT_10FDX; break; + case 6: *s |= PHY_STAT_100FDX; break; + } +} + +static phy_info_t phy_info_qs6612 = { + 0x00181440, + "QS6612", + + (const phy_cmd_t []) { /* config */ +// { mk_mii_write(MII_REG_ANAR, 0x061), NULL }, /* 10 Mbps */ + + /* The PHY powers up isolated on the RPX, + * so send a command to allow operation. + */ + + { mk_mii_write(MII_QS6612_PCR, 0x0dc0), NULL }, + + /* parse cr and anar to get some info */ + + { mk_mii_read(MII_REG_CR), mii_parse_cr }, + { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, + { mk_mii_end, } + }, + (const phy_cmd_t []) { /* startup - enable interrupts */ + { mk_mii_write(MII_QS6612_IMR, 0x003a), NULL }, + { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ + { mk_mii_end, } + }, + (const phy_cmd_t []) { /* ack_int */ + + /* we need to read ISR, SR and ANER to acknowledge */ + + { mk_mii_read(MII_QS6612_ISR), NULL }, + { mk_mii_read(MII_REG_SR), mii_parse_sr }, + { mk_mii_read(MII_REG_ANER), NULL }, + + /* read pcr to get info */ + + { mk_mii_read(MII_QS6612_PCR), mii_parse_qs6612_pcr }, + { mk_mii_end, } + }, + (const phy_cmd_t []) { /* shutdown - disable interrupts */ + { mk_mii_write(MII_QS6612_IMR, 0x0000), NULL }, + { mk_mii_end, } + }, +}; + +#endif /* CONFIG_FEC_QS6612 */ + +/* ------------------------------------------------------------------------- */ +/* The Advanced Micro Devices AM79C874 is used on the ICU862 */ + +#ifdef CONFIG_FEC_AM79C874 + +/* register definitions for the 79C874 */ + +#define MII_AM79C874_MFR 16 /* Miscellaneous Features Register */ +#define MII_AM79C874_ICSR 17 /* Interrupt Control/Status Register */ +#define MII_AM79C874_DR 18 /* Diagnostic Register */ +#define MII_AM79C874_PMLR 19 /* Power Management & Loopback Register */ +#define MII_AM79C874_MCR 21 /* Mode Control Register */ +#define MII_AM79C874_DC 23 /* Disconnect Counter */ +#define MII_AM79C874_REC 24 /* Receiver Error Counter */ + +static void mii_parse_amd79c874_dr(uint mii_reg, struct net_device *dev, uint data) +{ + volatile struct fec_enet_private *fep = dev->priv; + uint s = fep->phy_status; + + s &= ~(PHY_STAT_SPMASK); + + /* Register 18: Bit 10 is data rate, 11 is Duplex */ + switch ((mii_reg >> 10) & 3) { + case 0: s |= PHY_STAT_10HDX; break; + case 1: s |= PHY_STAT_100HDX; break; + case 2: s |= PHY_STAT_10FDX; break; + case 3: s |= PHY_STAT_100FDX; break; + } + + fep->phy_status = s; +} + +static phy_info_t phy_info_amd79c874 = { + 0x00022561, + "AM79C874", + + (const phy_cmd_t []) { /* config */ +// { mk_mii_write(MII_REG_ANAR, 0x021), NULL }, /* 10 Mbps, HD */ + { mk_mii_read(MII_REG_CR), mii_parse_cr }, + { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, + { mk_mii_end, } + }, + (const phy_cmd_t []) { /* startup - enable interrupts */ + { mk_mii_write(MII_AM79C874_ICSR, 0xff00), NULL }, + { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ + { mk_mii_end, } + }, + (const phy_cmd_t []) { /* ack_int */ + /* find out the current status */ + + { mk_mii_read(MII_REG_SR), mii_parse_sr }, + { mk_mii_read(MII_AM79C874_DR), mii_parse_amd79c874_dr }, + + /* we only need to read ICSR to acknowledge */ + + { mk_mii_read(MII_AM79C874_ICSR), NULL }, + { mk_mii_end, } + }, + (const phy_cmd_t []) { /* shutdown - disable interrupts */ + { mk_mii_write(MII_AM79C874_ICSR, 0x0000), NULL }, + { mk_mii_end, } + }, +}; + +#endif /* CONFIG_FEC_AM79C874 */ + +static phy_info_t *phy_info[] = { + +#ifdef CONFIG_FEC_LXT970 + &phy_info_lxt970, +#endif /* CONFIG_FEC_LXT970 */ + +#ifdef CONFIG_FEC_LXT971 + &phy_info_lxt971, +#endif /* CONFIG_FEC_LXT971 */ + +#ifdef CONFIG_FEC_QS6612 + &phy_info_qs6612, +#endif /* CONFIG_FEC_QS6612 */ + +#ifdef CONFIG_FEC_AM79C874 + &phy_info_amd79c874, +#endif /* CONFIG_FEC_AM79C874 */ + + NULL +}; + +static void mii_display_status(struct net_device *dev) +{ + struct fec_enet_private *fep = dev->priv; + volatile uint *s = &(fep->phy_status); + + if (!fep->link && !fep->old_link) { + /* Link is still down - don't print anything */ + return; + } + + printk("%s: status: ", dev->name); + + if (!fep->link) { + printk("link down"); + } else { + printk("link up"); + + switch(*s & PHY_STAT_SPMASK) { + case PHY_STAT_100FDX: printk(", 100 Mbps Full Duplex"); break; + case PHY_STAT_100HDX: printk(", 100 Mbps Half Duplex"); break; + case PHY_STAT_10FDX: printk(", 10 Mbps Full Duplex"); break; + case PHY_STAT_10HDX: printk(", 10 Mbps Half Duplex"); break; + default: + printk(", Unknown speed/duplex"); + } + + if (*s & PHY_STAT_ANC) + printk(", auto-negotiation complete"); + } + + if (*s & PHY_STAT_FAULT) + printk(", remote fault"); + + printk(".\n"); +} + +static void mii_display_config(struct net_device *dev) +{ + struct fec_enet_private *fep = dev->priv; + volatile uint *s = &(fep->phy_status); + + printk("%s: config: auto-negotiation ", dev->name); + + if (*s & PHY_CONF_ANE) + printk("on"); + else + printk("off"); + + if (*s & PHY_CONF_100FDX) + printk(", 100FDX"); + if (*s & PHY_CONF_100HDX) + printk(", 100HDX"); + if (*s & PHY_CONF_10FDX) + printk(", 10FDX"); + if (*s & PHY_CONF_10HDX) + printk(", 10HDX"); + if (!(*s & PHY_CONF_SPMASK)) + printk(", No speed/duplex selected?"); + + if (*s & PHY_CONF_LOOP) + printk(", loopback enabled"); + + printk(".\n"); + + fep->sequence_done = 1; +} + +static void mii_relink(struct net_device *dev) +{ + struct fec_enet_private *fep = dev->priv; + int duplex; + + fep->link = (fep->phy_status & PHY_STAT_LINK) ? 1 : 0; + mii_display_status(dev); + fep->old_link = fep->link; + + if (fep->link) { + duplex = 0; + if (fep->phy_status + & (PHY_STAT_100FDX | PHY_STAT_10FDX)) + duplex = 1; + fec_restart(dev, duplex); + } + else + fec_stop(dev); + +#if 0 + enable_irq(fep->mii_irq); +#endif + +} + +static void mii_queue_relink(uint mii_reg, struct net_device *dev) +{ + struct fec_enet_private *fep = dev->priv; + + fep->phy_task.routine = (void *)mii_relink; + fep->phy_task.data = dev; + schedule_task(&fep->phy_task); +} + +static void mii_queue_config(uint mii_reg, struct net_device *dev) +{ + struct fec_enet_private *fep = dev->priv; + + fep->phy_task.routine = (void *)mii_display_config; + fep->phy_task.data = dev; + schedule_task(&fep->phy_task); +} + + + +phy_cmd_t phy_cmd_relink[] = { { mk_mii_read(MII_REG_CR), mii_queue_relink }, + { mk_mii_end, } }; +phy_cmd_t phy_cmd_config[] = { { mk_mii_read(MII_REG_CR), mii_queue_config }, + { mk_mii_end, } }; + + + +/* Read remainder of PHY ID. +*/ +static void +mii_discover_phy3(uint mii_reg, struct net_device *dev) +{ + struct fec_enet_private *fep; + int i; + + fep = dev->priv; + fep->phy_id |= (mii_reg & 0xffff); + + for(i = 0; phy_info[i]; i++) + if(phy_info[i]->id == (fep->phy_id >> 4)) + break; + + if(!phy_info[i]) + panic("%s: PHY id 0x%08x is not supported!\n", + dev->name, fep->phy_id); + + fep->phy = phy_info[i]; + fep->phy_id_done = 1; + + printk("%s: Phy @ 0x%x, type %s (0x%08x)\n", + dev->name, fep->phy_addr, fep->phy->name, fep->phy_id); +} + +/* Scan all of the MII PHY addresses looking for someone to respond + * with a valid ID. This usually happens quickly. + */ +static void +mii_discover_phy(uint mii_reg, struct net_device *dev) +{ + struct fec_enet_private *fep; + uint phytype; + + fep = dev->priv; + + if ((phytype = (mii_reg & 0xffff)) != 0xffff) { + + /* Got first part of ID, now get remainder. + */ + fep->phy_id = phytype << 16; + mii_queue(dev, mk_mii_read(MII_REG_PHYIR2), mii_discover_phy3); + } else { + fep->phy_addr++; + if (fep->phy_addr < 32) { + mii_queue(dev, mk_mii_read(MII_REG_PHYIR1), + mii_discover_phy); + } else { + printk("fec: No PHY device found.\n"); + } + } +} +#endif /* CONFIG_USE_MDIO */ + +/* This interrupt occurs when the PHY detects a link change. +*/ +static void +#ifdef CONFIG_RPXCLASSIC +mii_link_interrupt(void *dev_id) +#else +mii_link_interrupt(int irq, void * dev_id, struct pt_regs * regs) +#endif +{ +#ifdef CONFIG_USE_MDIO + struct net_device *dev = dev_id; + struct fec_enet_private *fep = dev->priv; + volatile immap_t *immap = (immap_t *)IMAP_ADDR; + volatile fec_t *fecp = &(immap->im_cpm.cp_fec); + unsigned int ecntrl = fecp->fec_ecntrl; + + /* We need the FEC enabled to access the MII + */ + if ((ecntrl & FEC_ECNTRL_ETHER_EN) == 0) { + fecp->fec_ecntrl |= FEC_ECNTRL_ETHER_EN; + } +#endif /* CONFIG_USE_MDIO */ + +#if 0 + disable_irq(fep->mii_irq); /* disable now, enable later */ +#endif + + +#ifdef CONFIG_USE_MDIO + mii_do_cmd(dev, fep->phy->ack_int); + mii_do_cmd(dev, phy_cmd_relink); /* restart and display status */ + + if ((ecntrl & FEC_ECNTRL_ETHER_EN) == 0) { + fecp->fec_ecntrl = ecntrl; /* restore old settings */ + } +#else +printk("%s[%d] %s: unexpected Link interrupt\n", __FILE__,__LINE__,__FUNCTION__); +#endif /* CONFIG_USE_MDIO */ + +} + +static int +fec_enet_open(struct net_device *dev) +{ + struct fec_enet_private *fep = dev->priv; + + /* I should reset the ring buffers here, but I don't yet know + * a simple way to do that. + */ + +#ifdef CONFIG_USE_MDIO + fep->sequence_done = 0; + fep->link = 0; + + if (fep->phy) { + mii_do_cmd(dev, fep->phy->ack_int); + mii_do_cmd(dev, fep->phy->config); + mii_do_cmd(dev, phy_cmd_config); /* display configuration */ + while(!fep->sequence_done) + schedule(); + + mii_do_cmd(dev, fep->phy->startup); + netif_start_queue(dev); + return 0; /* Success */ + } + return -ENODEV; /* No PHY we understand */ +#else + fep->link = 1; + netif_start_queue(dev); + return 0; /* Success */ +#endif /* CONFIG_USE_MDIO */ + +} + +static int +fec_enet_close(struct net_device *dev) +{ + /* Don't know what to do yet. + */ + netif_stop_queue(dev); + fec_stop(dev); + + return 0; +} + +static struct net_device_stats *fec_enet_get_stats(struct net_device *dev) +{ + struct fec_enet_private *fep = (struct fec_enet_private *)dev->priv; + + return &fep->stats; +} + +/* Set or clear the multicast filter for this adaptor. + * Skeleton taken from sunlance driver. + * The CPM Ethernet implementation allows Multicast as well as individual + * MAC address filtering. Some of the drivers check to make sure it is + * a group multicast address, and discard those that are not. I guess I + * will do the same for now, but just remove the test if you want + * individual filtering as well (do the upper net layers want or support + * this kind of feature?). + */ + +static void set_multicast_list(struct net_device *dev) +{ + struct fec_enet_private *fep; + volatile fec_t *ep; + + fep = (struct fec_enet_private *)dev->priv; + ep = &(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec); + + if (dev->flags&IFF_PROMISC) { + + /* Log any net taps. */ + printk("%s: Promiscuous mode enabled.\n", dev->name); + ep->fec_r_cntrl |= FEC_RCNTRL_PROM; + } else { + + ep->fec_r_cntrl &= ~FEC_RCNTRL_PROM; + + if (dev->flags & IFF_ALLMULTI) { + /* Catch all multicast addresses, so set the + * filter to all 1's. + */ + ep->fec_hash_table_high = 0xffffffff; + ep->fec_hash_table_low = 0xffffffff; + } +#if 0 + else { + /* Clear filter and add the addresses in the list. + */ + ep->sen_gaddr1 = 0; + ep->sen_gaddr2 = 0; + ep->sen_gaddr3 = 0; + ep->sen_gaddr4 = 0; + + dmi = dev->mc_list; + + for (i=0; i<dev->mc_count; i++) { + + /* Only support group multicast for now. + */ + if (!(dmi->dmi_addr[0] & 1)) + continue; + + /* The address in dmi_addr is LSB first, + * and taddr is MSB first. We have to + * copy bytes MSB first from dmi_addr. + */ + mcptr = (u_char *)dmi->dmi_addr + 5; + tdptr = (u_char *)&ep->sen_taddrh; + for (j=0; j<6; j++) + *tdptr++ = *mcptr--; + + /* Ask CPM to run CRC and set bit in + * filter mask. + */ + cpmp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SCC1, CPM_CR_SET_GADDR) | CPM_CR_FLG; + /* this delay is necessary here -- Cort */ + udelay(10); + while (cpmp->cp_cpcr & CPM_CR_FLG); + } + } +#endif + } +} + +/* Initialize the FEC Ethernet on 860T. + */ +static int __init fec_enet_init(void) +{ + struct net_device *dev; + struct fec_enet_private *fep; + int i, j, k, err; + unsigned char *eap, *iap, *ba; + unsigned long mem_addr; + volatile cbd_t *bdp; + cbd_t *cbd_base; + volatile immap_t *immap; + volatile fec_t *fecp; + bd_t *bd; +#ifdef CONFIG_SCC_ENET + unsigned char tmpaddr[6]; +#endif + + immap = (immap_t *)IMAP_ADDR; /* pointer to internal registers */ + + bd = (bd_t *)__res; + + dev = alloc_etherdev(sizeof(*fep)); + if (!dev) + return -ENOMEM; + + fep = dev->priv; + + fecp = &(immap->im_cpm.cp_fec); + + /* Whack a reset. We should wait for this. + */ + fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET; + for (i = 0; + (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY); + ++i) { + udelay(1); + } + if (i == FEC_RESET_DELAY) { + printk ("FEC Reset timeout!\n"); + } + + /* Set the Ethernet address. If using multiple Enets on the 8xx, + * this needs some work to get unique addresses. + */ + eap = (unsigned char *)my_enet_addr; + iap = bd->bi_enetaddr; + +#ifdef CONFIG_SCC_ENET + /* + * If a board has Ethernet configured both on a SCC and the + * FEC, it needs (at least) 2 MAC addresses (we know that Sun + * disagrees, but anyway). For the FEC port, we create + * another address by setting one of the address bits above + * something that would have (up to now) been allocated. + */ + for (i=0; i<6; i++) + tmpaddr[i] = *iap++; + tmpaddr[3] |= 0x80; + iap = tmpaddr; +#endif + + for (i=0; i<6; i++) { + dev->dev_addr[i] = *eap++ = *iap++; + } + + /* Allocate memory for buffer descriptors. + */ + if (((RX_RING_SIZE + TX_RING_SIZE) * sizeof(cbd_t)) > PAGE_SIZE) { + printk("FEC init error. Need more space.\n"); + printk("FEC initialization failed.\n"); + return 1; + } + cbd_base = (cbd_t *)consistent_alloc(GFP_KERNEL, PAGE_SIZE, &mem_addr); + + /* Set receive and transmit descriptor base. + */ + fep->rx_bd_base = cbd_base; + fep->tx_bd_base = cbd_base + RX_RING_SIZE; + + fep->skb_cur = fep->skb_dirty = 0; + + /* Initialize the receive buffer descriptors. + */ + bdp = fep->rx_bd_base; + k = 0; + for (i=0; i<FEC_ENET_RX_PAGES; i++) { + + /* Allocate a page. + */ + ba = (unsigned char *)consistent_alloc(GFP_KERNEL, PAGE_SIZE, &mem_addr); + /* BUG: no check for failure */ + + /* Initialize the BD for every fragment in the page. + */ + for (j=0; j<FEC_ENET_RX_FRPPG; j++) { + bdp->cbd_sc = BD_ENET_RX_EMPTY; + bdp->cbd_bufaddr = mem_addr; + fep->rx_vaddr[k++] = ba; + mem_addr += FEC_ENET_RX_FRSIZE; + ba += FEC_ENET_RX_FRSIZE; + bdp++; + } + } + + /* Set the last buffer to wrap. + */ + bdp--; + bdp->cbd_sc |= BD_SC_WRAP; + +#ifdef CONFIG_FEC_PACKETHOOK + fep->ph_lock = 0; + fep->ph_rxhandler = fep->ph_txhandler = NULL; + fep->ph_proto = 0; + fep->ph_regaddr = NULL; + fep->ph_priv = NULL; +#endif + + /* Install our interrupt handler. + */ + if (request_irq(FEC_INTERRUPT, fec_enet_interrupt, 0, "fec", dev) != 0) + panic("Could not allocate FEC IRQ!"); + +#ifdef CONFIG_RPXCLASSIC + /* Make Port C, bit 15 an input that causes interrupts. + */ + immap->im_ioport.iop_pcpar &= ~0x0001; + immap->im_ioport.iop_pcdir &= ~0x0001; + immap->im_ioport.iop_pcso &= ~0x0001; + immap->im_ioport.iop_pcint |= 0x0001; + cpm_install_handler(CPMVEC_PIO_PC15, mii_link_interrupt, dev); + + /* Make LEDS reflect Link status. + */ + *((uint *) RPX_CSR_ADDR) &= ~BCSR2_FETHLEDMODE; +#endif + +#ifdef PHY_INTERRUPT + ((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel |= + (0x80000000 >> PHY_INTERRUPT); + + if (request_irq(PHY_INTERRUPT, mii_link_interrupt, 0, "mii", dev) != 0) + panic("Could not allocate MII IRQ!"); +#endif + + dev->base_addr = (unsigned long)fecp; + + /* The FEC Ethernet specific entries in the device structure. */ + dev->open = fec_enet_open; + dev->hard_start_xmit = fec_enet_start_xmit; + dev->tx_timeout = fec_timeout; + dev->watchdog_timeo = TX_TIMEOUT; + dev->stop = fec_enet_close; + dev->get_stats = fec_enet_get_stats; + dev->set_multicast_list = set_multicast_list; + +#ifdef CONFIG_USE_MDIO + for (i=0; i<NMII-1; i++) + mii_cmds[i].mii_next = &mii_cmds[i+1]; + mii_free = mii_cmds; +#endif /* CONFIG_USE_MDIO */ + + /* Configure all of port D for MII. + */ + immap->im_ioport.iop_pdpar = 0x1fff; + + /* Bits moved from Rev. D onward. + */ + if ((mfspr(SPRN_IMMR) & 0xffff) < 0x0501) + immap->im_ioport.iop_pddir = 0x1c58; /* Pre rev. D */ + else + immap->im_ioport.iop_pddir = 0x1fff; /* Rev. D and later */ + +#ifdef CONFIG_USE_MDIO + /* Set MII speed to 2.5 MHz + */ + fecp->fec_mii_speed = fep->phy_speed = + (( (bd->bi_intfreq + 500000) / 2500000 / 2 ) & 0x3F ) << 1; +#else + fecp->fec_mii_speed = 0; /* turn off MDIO */ +#endif /* CONFIG_USE_MDIO */ + + err = register_netdev(dev); + if (err) { + free_netdev(dev); + return err; + } + + printk ("%s: FEC ENET Version 0.2, FEC irq %d" +#ifdef PHY_INTERRUPT + ", MII irq %d" +#endif + ", addr ", + dev->name, FEC_INTERRUPT +#ifdef PHY_INTERRUPT + , PHY_INTERRUPT +#endif + ); + for (i=0; i<6; i++) + printk("%02x%c", dev->dev_addr[i], (i==5) ? '\n' : ':'); + +#ifdef CONFIG_USE_MDIO /* start in full duplex mode, and negotiate speed */ + fec_restart (dev, 1); +#else /* always use half duplex mode only */ + fec_restart (dev, 0); +#endif + +#ifdef CONFIG_USE_MDIO + /* Queue up command to detect the PHY and initialize the + * remainder of the interface. + */ + fep->phy_id_done = 0; + fep->phy_addr = 0; + mii_queue(dev, mk_mii_read(MII_REG_PHYIR1), mii_discover_phy); +#endif /* CONFIG_USE_MDIO */ + + return 0; +} +module_init(fec_enet_init); + +/* This function is called to start or restart the FEC during a link + * change. This only happens when switching between half and full + * duplex. + */ +static void +fec_restart(struct net_device *dev, int duplex) +{ + struct fec_enet_private *fep; + int i; + volatile cbd_t *bdp; + volatile immap_t *immap; + volatile fec_t *fecp; + + immap = (immap_t *)IMAP_ADDR; /* pointer to internal registers */ + + fecp = &(immap->im_cpm.cp_fec); + + fep = dev->priv; + + /* Whack a reset. We should wait for this. + */ + fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET; + for (i = 0; + (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY); + ++i) { + udelay(1); + } + if (i == FEC_RESET_DELAY) { + printk ("FEC Reset timeout!\n"); + } + + /* Set station address. + */ + fecp->fec_addr_low = (my_enet_addr[0] << 16) | my_enet_addr[1]; + fecp->fec_addr_high = my_enet_addr[2]; + + /* Reset all multicast. + */ + fecp->fec_hash_table_high = 0; + fecp->fec_hash_table_low = 0; + + /* Set maximum receive buffer size. + */ + fecp->fec_r_buff_size = PKT_MAXBLR_SIZE; + fecp->fec_r_hash = PKT_MAXBUF_SIZE; + + /* Set receive and transmit descriptor base. + */ + fecp->fec_r_des_start = iopa((uint)(fep->rx_bd_base)); + fecp->fec_x_des_start = iopa((uint)(fep->tx_bd_base)); + + fep->dirty_tx = fep->cur_tx = fep->tx_bd_base; + fep->cur_rx = fep->rx_bd_base; + + /* Reset SKB transmit buffers. + */ + fep->skb_cur = fep->skb_dirty = 0; + for (i=0; i<=TX_RING_MOD_MASK; i++) { + if (fep->tx_skbuff[i] != NULL) { + dev_kfree_skb(fep->tx_skbuff[i]); + fep->tx_skbuff[i] = NULL; + } + } + + /* Initialize the receive buffer descriptors. + */ + bdp = fep->rx_bd_base; + for (i=0; i<RX_RING_SIZE; i++) { + + /* Initialize the BD for every fragment in the page. + */ + bdp->cbd_sc = BD_ENET_RX_EMPTY; + bdp++; + } + + /* Set the last buffer to wrap. + */ + bdp--; + bdp->cbd_sc |= BD_SC_WRAP; + + /* ...and the same for transmmit. + */ + bdp = fep->tx_bd_base; + for (i=0; i<TX_RING_SIZE; i++) { + + /* Initialize the BD for every fragment in the page. + */ + bdp->cbd_sc = 0; + bdp->cbd_bufaddr = 0; + bdp++; + } + + /* Set the last buffer to wrap. + */ + bdp--; + bdp->cbd_sc |= BD_SC_WRAP; + + /* Enable MII mode. + */ + if (duplex) { + fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE; /* MII enable */ + fecp->fec_x_cntrl = FEC_TCNTRL_FDEN; /* FD enable */ + } + else { + fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT; + fecp->fec_x_cntrl = 0; + } + fep->full_duplex = duplex; + + /* Enable big endian and don't care about SDMA FC. + */ + fecp->fec_fun_code = 0x78000000; + +#ifdef CONFIG_USE_MDIO + /* Set MII speed. + */ + fecp->fec_mii_speed = fep->phy_speed; +#endif /* CONFIG_USE_MDIO */ + + /* Clear any outstanding interrupt. + */ + fecp->fec_ievent = 0xffc0; + + fecp->fec_ivec = (FEC_INTERRUPT/2) << 29; + + /* Enable interrupts we wish to service. + */ + fecp->fec_imask = ( FEC_ENET_TXF | FEC_ENET_TXB | + FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII ); + + /* And last, enable the transmit and receive processing. + */ + fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN; + fecp->fec_r_des_active = 0x01000000; +} + +static void +fec_stop(struct net_device *dev) +{ + volatile immap_t *immap; + volatile fec_t *fecp; + struct fec_enet_private *fep; + int i; + + immap = (immap_t *)IMAP_ADDR; /* pointer to internal registers */ + + fecp = &(immap->im_cpm.cp_fec); + + if ((fecp->fec_ecntrl & FEC_ECNTRL_ETHER_EN) == 0) + return; /* already down */ + + fep = dev->priv; + + + fecp->fec_x_cntrl = 0x01; /* Graceful transmit stop */ + + for (i = 0; + ((fecp->fec_ievent & 0x10000000) == 0) && (i < FEC_RESET_DELAY); + ++i) { + udelay(1); + } + if (i == FEC_RESET_DELAY) { + printk ("FEC timeout on graceful transmit stop\n"); + } + + /* Clear outstanding MII command interrupts. + */ + fecp->fec_ievent = FEC_ENET_MII; + + /* Enable MII command finished interrupt + */ + fecp->fec_ivec = (FEC_INTERRUPT/2) << 29; + fecp->fec_imask = FEC_ENET_MII; + +#ifdef CONFIG_USE_MDIO + /* Set MII speed. + */ + fecp->fec_mii_speed = fep->phy_speed; +#endif /* CONFIG_USE_MDIO */ + + /* Disable FEC + */ + fecp->fec_ecntrl &= ~(FEC_ECNTRL_ETHER_EN); +} |