diff options
Diffstat (limited to 'arch/ppc/8260_io/fcc_enet.c')
| -rw-r--r-- | arch/ppc/8260_io/fcc_enet.c | 2395 |
1 files changed, 2395 insertions, 0 deletions
diff --git a/arch/ppc/8260_io/fcc_enet.c b/arch/ppc/8260_io/fcc_enet.c new file mode 100644 index 00000000000..2086c6ad114 --- /dev/null +++ b/arch/ppc/8260_io/fcc_enet.c @@ -0,0 +1,2395 @@ +/* + * Fast Ethernet Controller (FCC) driver for Motorola MPC8260. + * Copyright (c) 2000 MontaVista Software, Inc. Dan Malek (dmalek@jlc.net) + * + * This version of the driver is a combination of the 8xx fec and + * 8260 SCC Ethernet drivers. This version has some additional + * configuration options, which should probably be moved out of + * here. This driver currently works for the EST SBC8260, + * SBS Diablo/BCM, Embedded Planet RPX6, TQM8260, and others. + * + * Right now, I am very watseful with the buffers. I allocate memory + * pages and then divide them into 2K frame buffers. This way I know I + * have buffers large enough to hold one frame within one buffer descriptor. + * Once I get this working, I will use 64 or 128 byte CPM buffers, which + * will be much more memory efficient and will easily handle lots of + * small packets. Since this is a cache coherent processor and CPM, + * I could also preallocate SKB's and use them directly on the interface. + * + * 2004-12 Leo Li (leoli@freescale.com) + * - Rework the FCC clock configuration part, make it easier to configure. + * + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/string.h> +#include <linux/ptrace.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/spinlock.h> +#include <linux/mii.h> +#include <linux/workqueue.h> +#include <linux/bitops.h> + +#include <asm/immap_cpm2.h> +#include <asm/pgtable.h> +#include <asm/mpc8260.h> +#include <asm/irq.h> +#include <asm/uaccess.h> +#include <asm/signal.h> + +/* We can't use the PHY interrupt if we aren't using MDIO. */ +#if !defined(CONFIG_USE_MDIO) +#undef PHY_INTERRUPT +#endif + +/* If we have a PHY interrupt, we will advertise both full-duplex and half- + * duplex capabilities. If we don't have a PHY interrupt, then we will only + * advertise half-duplex capabilities. + */ +#define MII_ADVERTISE_HALF (ADVERTISE_100HALF | ADVERTISE_10HALF | \ + ADVERTISE_CSMA) +#define MII_ADVERTISE_ALL (ADVERTISE_100FULL | ADVERTISE_10FULL | \ + MII_ADVERTISE_HALF) +#ifdef PHY_INTERRUPT +#define MII_ADVERTISE_DEFAULT MII_ADVERTISE_ALL +#else +#define MII_ADVERTISE_DEFAULT MII_ADVERTISE_HALF +#endif +#include <asm/cpm2.h> + +/* The transmitter timeout + */ +#define TX_TIMEOUT (2*HZ) + +#ifdef CONFIG_USE_MDIO +/* Forward declarations of some structures to support different PHYs */ + +typedef struct { + uint mii_data; + void (*funct)(uint mii_reg, struct net_device *dev); +} phy_cmd_t; + +typedef struct { + uint id; + char *name; + + const phy_cmd_t *config; + const phy_cmd_t *startup; + const phy_cmd_t *ack_int; + const phy_cmd_t *shutdown; +} phy_info_t; + +/* values for phy_status */ + +#define PHY_CONF_ANE 0x0001 /* 1 auto-negotiation enabled */ +#define PHY_CONF_LOOP 0x0002 /* 1 loopback mode enabled */ +#define PHY_CONF_SPMASK 0x00f0 /* mask for speed */ +#define PHY_CONF_10HDX 0x0010 /* 10 Mbit half duplex supported */ +#define PHY_CONF_10FDX 0x0020 /* 10 Mbit full duplex supported */ +#define PHY_CONF_100HDX 0x0040 /* 100 Mbit half duplex supported */ +#define PHY_CONF_100FDX 0x0080 /* 100 Mbit full duplex supported */ + +#define PHY_STAT_LINK 0x0100 /* 1 up - 0 down */ +#define PHY_STAT_FAULT 0x0200 /* 1 remote fault */ +#define PHY_STAT_ANC 0x0400 /* 1 auto-negotiation complete */ +#define PHY_STAT_SPMASK 0xf000 /* mask for speed */ +#define PHY_STAT_10HDX 0x1000 /* 10 Mbit half duplex selected */ +#define PHY_STAT_10FDX 0x2000 /* 10 Mbit full duplex selected */ +#define PHY_STAT_100HDX 0x4000 /* 100 Mbit half duplex selected */ +#define PHY_STAT_100FDX 0x8000 /* 100 Mbit full duplex selected */ +#endif /* CONFIG_USE_MDIO */ + +/* The number of Tx and Rx buffers. These are allocated from the page + * pool. The code may assume these are power of two, so it is best + * to keep them that size. + * We don't need to allocate pages for the transmitter. We just use + * the skbuffer directly. + */ +#define FCC_ENET_RX_PAGES 16 +#define FCC_ENET_RX_FRSIZE 2048 +#define FCC_ENET_RX_FRPPG (PAGE_SIZE / FCC_ENET_RX_FRSIZE) +#define RX_RING_SIZE (FCC_ENET_RX_FRPPG * FCC_ENET_RX_PAGES) +#define TX_RING_SIZE 16 /* Must be power of two */ +#define TX_RING_MOD_MASK 15 /* for this to work */ + +/* The FCC stores dest/src/type, data, and checksum for receive packets. + * size includes support for VLAN + */ +#define PKT_MAXBUF_SIZE 1522 +#define PKT_MINBUF_SIZE 64 + +/* Maximum input DMA size. Must be a should(?) be a multiple of 4. + * size includes support for VLAN + */ +#define PKT_MAXDMA_SIZE 1524 + +/* Maximum input buffer size. Must be a multiple of 32. +*/ +#define PKT_MAXBLR_SIZE 1536 + +static int fcc_enet_open(struct net_device *dev); +static int fcc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev); +static int fcc_enet_rx(struct net_device *dev); +static irqreturn_t fcc_enet_interrupt(int irq, void *dev_id, struct pt_regs *); +static int fcc_enet_close(struct net_device *dev); +static struct net_device_stats *fcc_enet_get_stats(struct net_device *dev); +/* static void set_multicast_list(struct net_device *dev); */ +static void fcc_restart(struct net_device *dev, int duplex); +static void fcc_stop(struct net_device *dev); +static int fcc_enet_set_mac_address(struct net_device *dev, void *addr); + +/* These will be configurable for the FCC choice. + * Multiple ports can be configured. There is little choice among the + * I/O pins to the PHY, except the clocks. We will need some board + * dependent clock selection. + * Why in the hell did I put these inside #ifdef's? I dunno, maybe to + * help show what pins are used for each device. + */ + +/* Since the CLK setting changes greatly from board to board, I changed + * it to a easy way. You just need to specify which CLK number to use. + * Note that only limited choices can be make on each port. + */ + +/* FCC1 Clock Source Configuration. There are board specific. + Can only choose from CLK9-12 */ +#ifdef CONFIG_SBC82xx +#define F1_RXCLK 9 +#define F1_TXCLK 10 +#elif defined(CONFIG_ADS8272) +#define F1_RXCLK 11 +#define F1_TXCLK 10 +#else +#define F1_RXCLK 12 +#define F1_TXCLK 11 +#endif + +/* FCC2 Clock Source Configuration. There are board specific. + Can only choose from CLK13-16 */ +#ifdef CONFIG_ADS8272 +#define F2_RXCLK 15 +#define F2_TXCLK 16 +#else +#define F2_RXCLK 13 +#define F2_TXCLK 14 +#endif + +/* FCC3 Clock Source Configuration. There are board specific. + Can only choose from CLK13-16 */ +#define F3_RXCLK 15 +#define F3_TXCLK 16 + +/* Automatically generates register configurations */ +#define PC_CLK(x) ((uint)(1<<(x-1))) /* FCC CLK I/O ports */ + +#define CMXFCR_RF1CS(x) ((uint)((x-5)<<27)) /* FCC1 Receive Clock Source */ +#define CMXFCR_TF1CS(x) ((uint)((x-5)<<24)) /* FCC1 Transmit Clock Source */ +#define CMXFCR_RF2CS(x) ((uint)((x-9)<<19)) /* FCC2 Receive Clock Source */ +#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16)) /* FCC2 Transmit Clock Source */ +#define CMXFCR_RF3CS(x) ((uint)((x-9)<<11)) /* FCC3 Receive Clock Source */ +#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8)) /* FCC3 Transmit Clock Source */ + +#define PC_F1RXCLK PC_CLK(F1_RXCLK) +#define PC_F1TXCLK PC_CLK(F1_TXCLK) +#define CMX1_CLK_ROUTE (CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK)) +#define CMX1_CLK_MASK ((uint)0xff000000) + +#define PC_F2RXCLK PC_CLK(F2_RXCLK) +#define PC_F2TXCLK PC_CLK(F2_TXCLK) +#define CMX2_CLK_ROUTE (CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK)) +#define CMX2_CLK_MASK ((uint)0x00ff0000) + +#define PC_F3RXCLK PC_CLK(F3_RXCLK) +#define PC_F3TXCLK PC_CLK(F3_TXCLK) +#define CMX3_CLK_ROUTE (CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK)) +#define CMX3_CLK_MASK ((uint)0x0000ff00) + + +/* I/O Pin assignment for FCC1. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PA1_COL ((uint)0x00000001) +#define PA1_CRS ((uint)0x00000002) +#define PA1_TXER ((uint)0x00000004) +#define PA1_TXEN ((uint)0x00000008) +#define PA1_RXDV ((uint)0x00000010) +#define PA1_RXER ((uint)0x00000020) +#define PA1_TXDAT ((uint)0x00003c00) +#define PA1_RXDAT ((uint)0x0003c000) +#define PA1_PSORA_BOUT (PA1_RXDAT | PA1_TXDAT) +#define PA1_PSORA_BIN (PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \ + PA1_RXDV | PA1_RXER) +#define PA1_DIRA_BOUT (PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV) +#define PA1_DIRA_BIN (PA1_TXDAT | PA1_TXEN | PA1_TXER) + + +/* I/O Pin assignment for FCC2. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PB2_TXER ((uint)0x00000001) +#define PB2_RXDV ((uint)0x00000002) +#define PB2_TXEN ((uint)0x00000004) +#define PB2_RXER ((uint)0x00000008) +#define PB2_COL ((uint)0x00000010) +#define PB2_CRS ((uint)0x00000020) +#define PB2_TXDAT ((uint)0x000003c0) +#define PB2_RXDAT ((uint)0x00003c00) +#define PB2_PSORB_BOUT (PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \ + PB2_RXER | PB2_RXDV | PB2_TXER) +#define PB2_PSORB_BIN (PB2_TXEN) +#define PB2_DIRB_BOUT (PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV) +#define PB2_DIRB_BIN (PB2_TXDAT | PB2_TXEN | PB2_TXER) + + +/* I/O Pin assignment for FCC3. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PB3_RXDV ((uint)0x00004000) +#define PB3_RXER ((uint)0x00008000) +#define PB3_TXER ((uint)0x00010000) +#define PB3_TXEN ((uint)0x00020000) +#define PB3_COL ((uint)0x00040000) +#define PB3_CRS ((uint)0x00080000) +#ifndef CONFIG_RPX8260 +#define PB3_TXDAT ((uint)0x0f000000) +#define PC3_TXDAT ((uint)0x00000000) +#else +#define PB3_TXDAT ((uint)0x0f000000) +#define PC3_TXDAT 0 +#endif +#define PB3_RXDAT ((uint)0x00f00000) +#define PB3_PSORB_BOUT (PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \ + PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN) +#define PB3_PSORB_BIN (0) +#define PB3_DIRB_BOUT (PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV) +#define PB3_DIRB_BIN (PB3_TXDAT | PB3_TXEN | PB3_TXER) + +#define PC3_PSORC_BOUT (PC3_TXDAT) +#define PC3_PSORC_BIN (0) +#define PC3_DIRC_BOUT (0) +#define PC3_DIRC_BIN (PC3_TXDAT) + + +/* MII status/control serial interface. +*/ +#if defined(CONFIG_RPX8260) +/* The EP8260 doesn't use Port C for MDIO */ +#define PC_MDIO ((uint)0x00000000) +#define PC_MDCK ((uint)0x00000000) +#elif defined(CONFIG_TQM8260) +/* TQM8260 has MDIO and MDCK on PC30 and PC31 respectively */ +#define PC_MDIO ((uint)0x00000002) +#define PC_MDCK ((uint)0x00000001) +#elif defined(CONFIG_ADS8272) +#define PC_MDIO ((uint)0x00002000) +#define PC_MDCK ((uint)0x00001000) +#elif defined(CONFIG_EST8260) || defined(CONFIG_ADS8260) || defined(CONFIG_PQ2FADS) +#define PC_MDIO ((uint)0x00400000) +#define PC_MDCK ((uint)0x00200000) +#else +#define PC_MDIO ((uint)0x00000004) +#define PC_MDCK ((uint)0x00000020) +#endif + +#if defined(CONFIG_USE_MDIO) && (!defined(PC_MDIO) || !defined(PC_MDCK)) +#error "Must define PC_MDIO and PC_MDCK if using MDIO" +#endif + +/* PHY addresses */ +/* default to dynamic config of phy addresses */ +#define FCC1_PHY_ADDR 0 +#ifdef CONFIG_PQ2FADS +#define FCC2_PHY_ADDR 0 +#else +#define FCC2_PHY_ADDR 2 +#endif +#define FCC3_PHY_ADDR 3 + +/* A table of information for supporting FCCs. This does two things. + * First, we know how many FCCs we have and they are always externally + * numbered from zero. Second, it holds control register and I/O + * information that could be different among board designs. + */ +typedef struct fcc_info { + uint fc_fccnum; + uint fc_phyaddr; + uint fc_cpmblock; + uint fc_cpmpage; + uint fc_proff; + uint fc_interrupt; + uint fc_trxclocks; + uint fc_clockroute; + uint fc_clockmask; + uint fc_mdio; + uint fc_mdck; +} fcc_info_t; + +static fcc_info_t fcc_ports[] = { +#ifdef CONFIG_FCC1_ENET + { 0, FCC1_PHY_ADDR, CPM_CR_FCC1_SBLOCK, CPM_CR_FCC1_PAGE, PROFF_FCC1, SIU_INT_FCC1, + (PC_F1RXCLK | PC_F1TXCLK), CMX1_CLK_ROUTE, CMX1_CLK_MASK, + PC_MDIO, PC_MDCK }, +#endif +#ifdef CONFIG_FCC2_ENET + { 1, FCC2_PHY_ADDR, CPM_CR_FCC2_SBLOCK, CPM_CR_FCC2_PAGE, PROFF_FCC2, SIU_INT_FCC2, + (PC_F2RXCLK | PC_F2TXCLK), CMX2_CLK_ROUTE, CMX2_CLK_MASK, + PC_MDIO, PC_MDCK }, +#endif +#ifdef CONFIG_FCC3_ENET + { 2, FCC3_PHY_ADDR, CPM_CR_FCC3_SBLOCK, CPM_CR_FCC3_PAGE, PROFF_FCC3, SIU_INT_FCC3, + (PC_F3RXCLK | PC_F3TXCLK), CMX3_CLK_ROUTE, CMX3_CLK_MASK, + PC_MDIO, PC_MDCK }, +#endif +}; + +/* The FCC buffer descriptors track the ring buffers. The rx_bd_base and + * tx_bd_base always point to the base of the buffer descriptors. The + * cur_rx and cur_tx point to the currently available buffer. + * The dirty_tx tracks the current buffer that is being sent by the + * controller. The cur_tx and dirty_tx are equal under both completely + * empty and completely full conditions. The empty/ready indicator in + * the buffer descriptor determines the actual condition. + */ +struct fcc_enet_private { + /* The saved address of a sent-in-place packet/buffer, for skfree(). */ + struct sk_buff* tx_skbuff[TX_RING_SIZE]; + ushort skb_cur; + ushort skb_dirty; + + /* CPM dual port RAM relative addresses. + */ + cbd_t *rx_bd_base; /* Address of Rx and Tx buffers. */ + cbd_t *tx_bd_base; + cbd_t *cur_rx, *cur_tx; /* The next free ring entry */ + cbd_t *dirty_tx; /* The ring entries to be free()ed. */ + volatile fcc_t *fccp; + volatile fcc_enet_t *ep; + struct net_device_stats stats; + uint tx_free; + spinlock_t lock; + +#ifdef CONFIG_USE_MDIO + uint phy_id; + uint phy_id_done; + uint phy_status; + phy_info_t *phy; + struct work_struct phy_relink; + struct work_struct phy_display_config; + + uint sequence_done; + + uint phy_addr; +#endif /* CONFIG_USE_MDIO */ + + int link; + int old_link; + int full_duplex; + + fcc_info_t *fip; +}; + +static void init_fcc_shutdown(fcc_info_t *fip, struct fcc_enet_private *cep, + volatile cpm2_map_t *immap); +static void init_fcc_startup(fcc_info_t *fip, struct net_device *dev); +static void init_fcc_ioports(fcc_info_t *fip, volatile iop_cpm2_t *io, + volatile cpm2_map_t *immap); +static void init_fcc_param(fcc_info_t *fip, struct net_device *dev, + volatile cpm2_map_t *immap); + +#ifdef CONFIG_USE_MDIO +static int mii_queue(struct net_device *dev, int request, void (*func)(uint, struct net_device *)); +static uint mii_send_receive(fcc_info_t *fip, uint cmd); +static void mii_do_cmd(struct net_device *dev, const phy_cmd_t *c); + +/* Make MII read/write commands for the FCC. +*/ +#define mk_mii_read(REG) (0x60020000 | (((REG) & 0x1f) << 18)) +#define mk_mii_write(REG, VAL) (0x50020000 | (((REG) & 0x1f) << 18) | \ + ((VAL) & 0xffff)) +#define mk_mii_end 0 +#endif /* CONFIG_USE_MDIO */ + + +static int +fcc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct fcc_enet_private *cep = (struct fcc_enet_private *)dev->priv; + volatile cbd_t *bdp; + + /* Fill in a Tx ring entry */ + bdp = cep->cur_tx; + +#ifndef final_version + if (!cep->tx_free || (bdp->cbd_sc & BD_ENET_TX_READY)) { + /* Ooops. All transmit buffers are full. Bail out. + * This should not happen, since the tx queue should be stopped. + */ + printk("%s: tx queue full!.\n", dev->name); + return 1; + } +#endif + + /* Clear all of the status flags. */ + bdp->cbd_sc &= ~BD_ENET_TX_STATS; + + /* If the frame is short, tell CPM to pad it. */ + if (skb->len <= ETH_ZLEN) + bdp->cbd_sc |= BD_ENET_TX_PAD; + else + bdp->cbd_sc &= ~BD_ENET_TX_PAD; + + /* Set buffer length and buffer pointer. */ + bdp->cbd_datlen = skb->len; + bdp->cbd_bufaddr = __pa(skb->data); + + spin_lock_irq(&cep->lock); + + /* Save skb pointer. */ + cep->tx_skbuff[cep->skb_cur] = skb; + + cep->stats.tx_bytes += skb->len; + cep->skb_cur = (cep->skb_cur+1) & TX_RING_MOD_MASK; + + /* Send it on its way. Tell CPM its ready, interrupt when done, + * its the last BD of the frame, and to put the CRC on the end. + */ + bdp->cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_INTR | BD_ENET_TX_LAST | BD_ENET_TX_TC); + +#if 0 + /* Errata says don't do this. */ + cep->fccp->fcc_ftodr = 0x8000; +#endif + dev->trans_start = jiffies; + + /* If this was the last BD in the ring, start at the beginning again. */ + if (bdp->cbd_sc & BD_ENET_TX_WRAP) + bdp = cep->tx_bd_base; + else + bdp++; + + if (!--cep->tx_free) + netif_stop_queue(dev); + + cep->cur_tx = (cbd_t *)bdp; + + spin_unlock_irq(&cep->lock); + + return 0; +} + + +static void +fcc_enet_timeout(struct net_device *dev) +{ + struct fcc_enet_private *cep = (struct fcc_enet_private *)dev->priv; + + printk("%s: transmit timed out.\n", dev->name); + cep->stats.tx_errors++; +#ifndef final_version + { + int i; + cbd_t *bdp; + printk(" Ring data dump: cur_tx %p tx_free %d cur_rx %p.\n", + cep->cur_tx, cep->tx_free, + cep->cur_rx); + bdp = cep->tx_bd_base; + printk(" Tx @base %p :\n", bdp); + for (i = 0 ; i < TX_RING_SIZE; i++, bdp++) + printk("%04x %04x %08x\n", + bdp->cbd_sc, + bdp->cbd_datlen, + bdp->cbd_bufaddr); + bdp = cep->rx_bd_base; + printk(" Rx @base %p :\n", bdp); + for (i = 0 ; i < RX_RING_SIZE; i++, bdp++) + printk("%04x %04x %08x\n", + bdp->cbd_sc, + bdp->cbd_datlen, + bdp->cbd_bufaddr); + } +#endif + if (cep->tx_free) + netif_wake_queue(dev); +} + +/* The interrupt handler. */ +static irqreturn_t +fcc_enet_interrupt(int irq, void * dev_id, struct pt_regs * regs) +{ + struct net_device *dev = dev_id; + volatile struct fcc_enet_private *cep; + volatile cbd_t *bdp; + ushort int_events; + int must_restart; + + cep = (struct fcc_enet_private *)dev->priv; + + /* Get the interrupt events that caused us to be here. + */ + int_events = cep->fccp->fcc_fcce; + cep->fccp->fcc_fcce = (int_events & cep->fccp->fcc_fccm); + must_restart = 0; + +#ifdef PHY_INTERRUPT + /* We have to be careful here to make sure that we aren't + * interrupted by a PHY interrupt. + */ + disable_irq_nosync(PHY_INTERRUPT); +#endif + + /* Handle receive event in its own function. + */ + if (int_events & FCC_ENET_RXF) + fcc_enet_rx(dev_id); + + /* Check for a transmit error. The manual is a little unclear + * about this, so the debug code until I get it figured out. It + * appears that if TXE is set, then TXB is not set. However, + * if carrier sense is lost during frame transmission, the TXE + * bit is set, "and continues the buffer transmission normally." + * I don't know if "normally" implies TXB is set when the buffer + * descriptor is closed.....trial and error :-). + */ + + /* Transmit OK, or non-fatal error. Update the buffer descriptors. + */ + if (int_events & (FCC_ENET_TXE | FCC_ENET_TXB)) { + spin_lock(&cep->lock); + bdp = cep->dirty_tx; + while ((bdp->cbd_sc&BD_ENET_TX_READY)==0) { + if (cep->tx_free == TX_RING_SIZE) + break; + + if (bdp->cbd_sc & BD_ENET_TX_HB) /* No heartbeat */ + cep->stats.tx_heartbeat_errors++; + if (bdp->cbd_sc & BD_ENET_TX_LC) /* Late collision */ + cep->stats.tx_window_errors++; + if (bdp->cbd_sc & BD_ENET_TX_RL) /* Retrans limit */ + cep->stats.tx_aborted_errors++; + if (bdp->cbd_sc & BD_ENET_TX_UN) /* Underrun */ + cep->stats.tx_fifo_errors++; + if (bdp->cbd_sc & BD_ENET_TX_CSL) /* Carrier lost */ + cep->stats.tx_carrier_errors++; + + + /* No heartbeat or Lost carrier are not really bad errors. + * The others require a restart transmit command. + */ + if (bdp->cbd_sc & + (BD_ENET_TX_LC | BD_ENET_TX_RL | BD_ENET_TX_UN)) { + must_restart = 1; + cep->stats.tx_errors++; + } + + cep->stats.tx_packets++; + + /* Deferred means some collisions occurred during transmit, + * but we eventually sent the packet OK. + */ + if (bdp->cbd_sc & BD_ENET_TX_DEF) + cep->stats.collisions++; + + /* Free the sk buffer associated with this last transmit. */ + dev_kfree_skb_irq(cep->tx_skbuff[cep->skb_dirty]); + cep->tx_skbuff[cep->skb_dirty] = NULL; + cep->skb_dirty = (cep->skb_dirty + 1) & TX_RING_MOD_MASK; + + /* Update pointer to next buffer descriptor to be transmitted. */ + if (bdp->cbd_sc & BD_ENET_TX_WRAP) + bdp = cep->tx_bd_base; + else + bdp++; + + /* I don't know if we can be held off from processing these + * interrupts for more than one frame time. I really hope + * not. In such a case, we would now want to check the + * currently available BD (cur_tx) and determine if any + * buffers between the dirty_tx and cur_tx have also been + * sent. We would want to process anything in between that + * does not have BD_ENET_TX_READY set. + */ + + /* Since we have freed up a buffer, the ring is no longer + * full. + */ + if (!cep->tx_free++) { + if (netif_queue_stopped(dev)) { + netif_wake_queue(dev); + } + } + + cep->dirty_tx = (cbd_t *)bdp; + } + + if (must_restart) { + volatile cpm_cpm2_t *cp; + + /* Some transmit errors cause the transmitter to shut + * down. We now issue a restart transmit. Since the + * errors close the BD and update the pointers, the restart + * _should_ pick up without having to reset any of our + * pointers either. Also, To workaround 8260 device erratum + * CPM37, we must disable and then re-enable the transmitter + * following a Late Collision, Underrun, or Retry Limit error. + */ + cep->fccp->fcc_gfmr &= ~FCC_GFMR_ENT; + udelay(10); /* wait a few microseconds just on principle */ + cep->fccp->fcc_gfmr |= FCC_GFMR_ENT; + + cp = cpmp; + cp->cp_cpcr = + mk_cr_cmd(cep->fip->fc_cpmpage, cep->fip->fc_cpmblock, + 0x0c, CPM_CR_RESTART_TX) | CPM_CR_FLG; + while (cp->cp_cpcr & CPM_CR_FLG); + } + spin_unlock(&cep->lock); + } + + /* Check for receive busy, i.e. packets coming but no place to + * put them. + */ + if (int_events & FCC_ENET_BSY) { + cep->fccp->fcc_fcce = FCC_ENET_BSY; + cep->stats.rx_dropped++; + } + +#ifdef PHY_INTERRUPT + enable_irq(PHY_INTERRUPT); +#endif + return IRQ_HANDLED; +} + +/* During a receive, the cur_rx points to the current incoming buffer. + * When we update through the ring, if the next incoming buffer has + * not been given to the system, we just set the empty indicator, + * effectively tossing the packet. + */ +static int +fcc_enet_rx(struct net_device *dev) +{ + struct fcc_enet_private *cep; + volatile cbd_t *bdp; + struct sk_buff *skb; + ushort pkt_len; + + cep = (struct fcc_enet_private *)dev->priv; + + /* First, grab all of the stats for the incoming packet. + * These get messed up if we get called due to a busy condition. + */ + bdp = cep->cur_rx; + +for (;;) { + if (bdp->cbd_sc & BD_ENET_RX_EMPTY) + break; + +#ifndef final_version + /* Since we have allocated space to hold a complete frame, both + * the first and last indicators should be set. + */ + if ((bdp->cbd_sc & (BD_ENET_RX_FIRST | BD_ENET_RX_LAST)) != + (BD_ENET_RX_FIRST | BD_ENET_RX_LAST)) + printk("CPM ENET: rcv is not first+last\n"); +#endif + + /* Frame too long or too short. */ + if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH)) + cep->stats.rx_length_errors++; + if (bdp->cbd_sc & BD_ENET_RX_NO) /* Frame alignment */ + cep->stats.rx_frame_errors++; + if (bdp->cbd_sc & BD_ENET_RX_CR) /* CRC Error */ + cep->stats.rx_crc_errors++; + if (bdp->cbd_sc & BD_ENET_RX_OV) /* FIFO overrun */ + cep->stats.rx_crc_errors++; + if (bdp->cbd_sc & BD_ENET_RX_CL) /* Late Collision */ + cep->stats.rx_frame_errors++; + + if (!(bdp->cbd_sc & + (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO | BD_ENET_RX_CR + | BD_ENET_RX_OV | BD_ENET_RX_CL))) + { + /* Process the incoming frame. */ + cep->stats.rx_packets++; + + /* Remove the FCS from the packet length. */ + pkt_len = bdp->cbd_datlen - 4; + cep->stats.rx_bytes += pkt_len; + + /* This does 16 byte alignment, much more than we need. */ + skb = dev_alloc_skb(pkt_len); + + if (skb == NULL) { + printk("%s: Memory squeeze, dropping packet.\n", dev->name); + cep->stats.rx_dropped++; + } + else { + skb->dev = dev; + skb_put(skb,pkt_len); /* Make room */ + eth_copy_and_sum(skb, + (unsigned char *)__va(bdp->cbd_bufaddr), + pkt_len, 0); + skb->protocol=eth_type_trans(skb,dev); + netif_rx(skb); + } + } + + /* Clear the status flags for this buffer. */ + bdp->cbd_sc &= ~BD_ENET_RX_STATS; + + /* Mark the buffer empty. */ + bdp->cbd_sc |= BD_ENET_RX_EMPTY; + + /* Update BD pointer to next entry. */ + if (bdp->cbd_sc & BD_ENET_RX_WRAP) + bdp = cep->rx_bd_base; + else + bdp++; + + } + cep->cur_rx = (cbd_t *)bdp; + + return 0; +} + +static int +fcc_enet_close(struct net_device *dev) +{ +#ifdef CONFIG_USE_MDIO + struct fcc_enet_private *fep = dev->priv; +#endif + + netif_stop_queue(dev); + fcc_stop(dev); +#ifdef CONFIG_USE_MDIO + if (fep->phy) + mii_do_cmd(dev, fep->phy->shutdown); +#endif + + return 0; +} + +static struct net_device_stats *fcc_enet_get_stats(struct net_device *dev) +{ + struct fcc_enet_private *cep = (struct fcc_enet_private *)dev->priv; + + return &cep->stats; +} + +#ifdef CONFIG_USE_MDIO + +/* NOTE: Most of the following comes from the FEC driver for 860. The + * overall structure of MII code has been retained (as it's proved stable + * and well-tested), but actual transfer requests are processed "at once" + * instead of being queued (there's no interrupt-driven MII transfer + * mechanism, one has to toggle the data/clock bits manually). + */ +static int +mii_queue(struct net_device *dev, int regval, void (*func)(uint, struct net_device *)) +{ + struct fcc_enet_private *fep; + int retval, tmp; + + /* Add PHY address to register command. */ + fep = dev->priv; + regval |= fep->phy_addr << 23; + + retval = 0; + + tmp = mii_send_receive(fep->fip, regval); + if (func) + func(tmp, dev); + + return retval; +} + +static void mii_do_cmd(struct net_device *dev, const phy_cmd_t *c) +{ + int k; + + if(!c) + return; + + for(k = 0; (c+k)->mii_data != mk_mii_end; k++) + mii_queue(dev, (c+k)->mii_data, (c+k)->funct); +} + +static void mii_parse_sr(uint mii_reg, struct net_device *dev) +{ + volatile struct fcc_enet_private *fep = dev->priv; + uint s = fep->phy_status; + + s &= ~(PHY_STAT_LINK | PHY_STAT_FAULT | PHY_STAT_ANC); + + if (mii_reg & BMSR_LSTATUS) + s |= PHY_STAT_LINK; + if (mii_reg & BMSR_RFAULT) + s |= PHY_STAT_FAULT; + if (mii_reg & BMSR_ANEGCOMPLETE) + s |= PHY_STAT_ANC; + + fep->phy_status = s; +} + +static void mii_parse_cr(uint mii_reg, struct net_device *dev) +{ + volatile struct fcc_enet_private *fep = dev->priv; + uint s = fep->phy_status; + + s &= ~(PHY_CONF_ANE | PHY_CONF_LOOP); + + if (mii_reg & BMCR_ANENABLE) + s |= PHY_CONF_ANE; + if (mii_reg & BMCR_LOOPBACK) + s |= PHY_CONF_LOOP; + + fep->phy_status = s; +} + +static void mii_parse_anar(uint mii_reg, struct net_device *dev) +{ + volatile struct fcc_enet_private *fep = dev->priv; + uint s = fep->phy_status; + + s &= ~(PHY_CONF_SPMASK); + + if (mii_reg & ADVERTISE_10HALF) + s |= PHY_CONF_10HDX; + if (mii_reg & ADVERTISE_10FULL) + s |= PHY_CONF_10FDX; + if (mii_reg & ADVERTISE_100HALF) + s |= PHY_CONF_100HDX; + if (mii_reg & ADVERTISE_100FULL) + s |= PHY_CONF_100FDX; + + fep->phy_status = s; +} + +/* ------------------------------------------------------------------------- */ +/* Generic PHY support. Should work for all PHYs, but does not support link + * change interrupts. + */ +#ifdef CONFIG_FCC_GENERIC_PHY + +static phy_info_t phy_info_generic = { + 0x00000000, /* 0-->match any PHY */ + "GENERIC", + + (const phy_cmd_t []) { /* config */ + /* advertise only half-duplex capabilities */ + { mk_mii_write(MII_ADVERTISE, MII_ADVERTISE_HALF), + mii_parse_anar }, + + /* enable auto-negotiation */ + { mk_mii_write(MII_BMCR, BMCR_ANENABLE), mii_parse_cr }, + { mk_mii_end, } + }, + (const phy_cmd_t []) { /* startup */ + /* restart auto-negotiation */ + { mk_mii_write(MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART), + NULL }, + { mk_mii_end, } + }, + (const phy_cmd_t []) { /* ack_int */ + /* We don't actually use the ack_int table with a generic + * PHY, but putting a reference to mii_parse_sr here keeps + * us from getting a compiler warning about unused static + * functions in the case where we only compile in generic + * PHY support. + */ + { mk_mii_read(MII_BMSR), mii_parse_sr }, + { mk_mii_end, } + }, + (const phy_cmd_t []) { /* shutdown */ + { mk_mii_end, } + }, +}; +#endif /* ifdef CONFIG_FCC_GENERIC_PHY */ + +/* ------------------------------------------------------------------------- */ +/* The Level one LXT970 is used by many boards */ + +#ifdef CONFIG_FCC_LXT970 + +#define MII_LXT970_MIRROR 16 /* Mirror register */ +#define MII_LXT970_IER 17 /* Interrupt Enable Register */ +#define MII_LXT970_ISR 18 /* Interrupt Status Register */ +#define MII_LXT970_CONFIG 19 /* Configuration Register */ +#define MII_LXT970_CSR 20 /* Chip Status Register */ + +static void mii_parse_lxt970_csr(uint mii_reg, struct net_device *dev) +{ + volatile struct fcc_enet_private *fep = dev->priv; + uint s = fep->phy_status; + + s &= ~(PHY_STAT_SPMASK); + + if (mii_reg & 0x0800) { + if (mii_reg & 0x1000) + s |= PHY_STAT_100FDX; + else + s |= PHY_STAT_100HDX; + } else { + if (mii_reg & 0x1000) + s |= PHY_STAT_10FDX; + else + s |= PHY_STAT_10HDX; + } + + fep->phy_status = s; +} + +static phy_info_t phy_info_lxt970 = { + 0x07810000, + "LXT970", + + (const phy_cmd_t []) { /* config */ +#if 0 +// { mk_mii_write(MII_ADVERTISE, 0x0021), NULL }, + + /* Set default operation of 100-TX....for some reason + * some of these bits are set on power up, which is wrong. + */ + { mk_mii_write(MII_LXT970_CONFIG, 0), NULL }, +#endif + { mk_mii_read(MII_BMCR), mii_parse_cr }, + { mk_mii_read(MII_ADVERTISE), mii_parse_anar }, + { mk_mii_end, } + }, + (const phy_cmd_t []) { /* startup - enable interrupts */ + { mk_mii_write(MII_LXT970_IER, 0x0002), NULL }, + { mk_mii_write(MII_BMCR, 0x1200), NULL }, /* autonegotiate */ + { mk_mii_end, } + }, + (const phy_cmd_t []) { /* ack_int */ + /* read SR and ISR to acknowledge */ + + { mk_mii_read(MII_BMSR), mii_parse_sr }, + { mk_mii_read(MII_LXT970_ISR), NULL }, + + /* find out the current status */ + + { mk_mii_read(MII_LXT970_CSR), mii_parse_lxt970_csr }, + { mk_mii_end, } + }, + (const phy_cmd_t []) { /* shutdown - disable interrupts */ + { mk_mii_write(MII_LXT970_IER, 0x0000), NULL }, + { mk_mii_end, } + }, +}; + +#endif /* CONFIG_FEC_LXT970 */ + +/* ------------------------------------------------------------------------- */ +/* The Level one LXT971 is used on some of my custom boards */ + +#ifdef CONFIG_FCC_LXT971 + +/* register definitions for the 971 */ + +#define MII_LXT971_PCR 16 /* Port Control Register */ +#define MII_LXT971_SR2 17 /* Status Register 2 */ +#define MII_LXT971_IER 18 /* Interrupt Enable Register */ +#define MII_LXT971_ISR 19 /* Interrupt Status Register */ +#define MII_LXT971_LCR 20 /* LED Control Register */ +#define MII_LXT971_TCR 30 /* Transmit Control Register */ + +/* + * I had some nice ideas of running the MDIO faster... + * The 971 should support 8MHz and I tried it, but things acted really + * weird, so 2.5 MHz ought to be enough for anyone... + */ + +static void mii_parse_lxt971_sr2(uint mii_reg, struct net_device *dev) +{ + volatile struct fcc_enet_private *fep = dev->priv; + uint s = fep->phy_status; + + s &= ~(PHY_STAT_SPMASK); + + if (mii_reg & 0x4000) { + if (mii_reg & 0x0200) + s |= PHY_STAT_100FDX; + else + s |= PHY_STAT_100HDX; + } else { + if (mii_reg & 0x0200) + s |= PHY_STAT_10FDX; + else + s |= PHY_STAT_10HDX; + } + if (mii_reg & 0x0008) + s |= PHY_STAT_FAULT; + + fep->phy_status = s; +} + +static phy_info_t phy_info_lxt971 = { + 0x0001378e, + "LXT971", + + (const phy_cmd_t []) { /* config */ + /* configure link capabilities to advertise */ + { mk_mii_write(MII_ADVERTISE, MII_ADVERTISE_DEFAULT), + mii_parse_anar }, + + /* enable auto-negotiation */ + { mk_mii_write(MII_BMCR, BMCR_ANENABLE), mii_parse_cr }, + { mk_mii_end, } + }, + (const phy_cmd_t []) { /* startup - enable interrupts */ + { mk_mii_write(MII_LXT971_IER, 0x00f2), NULL }, + + /* restart auto-negotiation */ + { mk_mii_write(MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART), + NULL }, + { mk_mii_end, } + }, + (const phy_cmd_t []) { /* ack_int */ + /* find out the current status */ + { mk_mii_read(MII_BMSR), NULL }, + { mk_mii_read(MII_BMSR), mii_parse_sr }, + { mk_mii_read(MII_LXT971_SR2), mii_parse_lxt971_sr2 }, + + /* we only need to read ISR to acknowledge */ + { mk_mii_read(MII_LXT971_ISR), NULL }, + { mk_mii_end, } + }, + (const phy_cmd_t []) { /* shutdown - disable interrupts */ + { mk_mii_write(MII_LXT971_IER, 0x0000), NULL }, + { mk_mii_end, } + }, +}; + +#endif /* CONFIG_FCC_LXT971 */ + +/* ------------------------------------------------------------------------- */ +/* The Quality Semiconductor QS6612 is used on the RPX CLLF */ + +#ifdef CONFIG_FCC_QS6612 + +/* register definitions */ + +#define MII_QS6612_MCR 17 /* Mode Control Register */ +#define MII_QS6612_FTR 27 /* Factory Test Register */ +#define MII_QS6612_MCO 28 /* Misc. Control Register */ +#define MII_QS6612_ISR 29 /* Interrupt Source Register */ +#define MII_QS6612_IMR 30 /* Interrupt Mask Register */ +#define MII_QS6612_PCR 31 /* 100BaseTx PHY Control Reg. */ + +static void mii_parse_qs6612_pcr(uint mii_reg, struct net_device *dev) +{ + volatile struct fcc_enet_private *fep = dev->priv; + uint s = fep->phy_status; + + s &= ~(PHY_STAT_SPMASK); + + switch((mii_reg >> 2) & 7) { + case 1: s |= PHY_STAT_10HDX; break; + case 2: s |= PHY_STAT_100HDX; break; + case 5: s |= PHY_STAT_10FDX; break; + case 6: s |= PHY_STAT_100FDX; break; + } + + fep->phy_status = s; +} + +static phy_info_t phy_info_qs6612 = { + 0x00181440, + "QS6612", + + (const phy_cmd_t []) { /* config */ +// { mk_mii_write(MII_ADVERTISE, 0x061), NULL }, /* 10 Mbps */ + + /* The PHY powers up isolated on the RPX, + * so send a command to allow operation. + */ + + { mk_mii_write(MII_QS6612_PCR, 0x0dc0), NULL },</ |