diff options
Diffstat (limited to 'arch/powerpc')
25 files changed, 366 insertions, 664 deletions
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 81d3b3ddc20..a3fc7a23158 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -168,6 +168,8 @@ endef archclean: $(Q)$(MAKE) $(clean)=$(boot) + +archmrproper: $(Q)rm -rf arch/$(ARCH)/include archprepare: checkbin diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index d6fed3f5658..2c3fd200767 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc5 -# Tue Dec 20 15:59:30 2005 +# Linux kernel version: 2.6.16-rc2 +# Fri Feb 10 17:33:08 2006 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -16,6 +16,10 @@ CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +# CONFIG_PPC_UDBG_16550 is not set +CONFIG_GENERIC_TBSYNC=y +# CONFIG_DEFAULT_UIMAGE is not set # # Processor support @@ -26,13 +30,12 @@ CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_SMP=y -CONFIG_NR_CPUS=2 +CONFIG_NR_CPUS=4 # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -47,8 +50,6 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set @@ -58,8 +59,10 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -68,8 +71,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -112,13 +117,12 @@ CONFIG_PPC_PMAC=y CONFIG_PPC_PMAC64=y # CONFIG_PPC_MAPLE is not set # CONFIG_PPC_CELL is not set -CONFIG_PPC_OF=y CONFIG_U3_DART=y CONFIG_MPIC=y # CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set +CONFIG_MPIC_BROKEN_U3=y # CONFIG_PPC_MPC106 is not set -CONFIG_GENERIC_TBSYNC=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set @@ -151,6 +155,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y # CONFIG_HOTPLUG_CPU is not set CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y # CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y @@ -202,6 +207,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -239,6 +245,7 @@ CONFIG_NETFILTER=y # Core Netfilter Configuration # # CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NETFILTER_XTABLES is not set # # IP: Netfilter Configuration @@ -255,65 +262,6 @@ CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -# CONFIG_IP_NF_MATCH_DCCP is not set -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_CONNBYTES=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m # # DCCP Configuration (EXPERIMENTAL) @@ -324,6 +272,11 @@ CONFIG_IP_NF_ARP_MANGLE=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -342,7 +295,6 @@ CONFIG_LLC=y # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y # # Network testing @@ -545,13 +497,7 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -614,7 +560,6 @@ CONFIG_IEEE1394_SBP2=m CONFIG_IEEE1394_ETH1394=m CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_RAWIO=y -# CONFIG_IEEE1394_CMP is not set # # I2O device support @@ -630,6 +575,7 @@ CONFIG_THERM_PM72=y CONFIG_WINDFARM=y CONFIG_WINDFARM_PM81=y CONFIG_WINDFARM_PM91=y +CONFIG_WINDFARM_PM112=y # # Network device support @@ -682,8 +628,9 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set -CONFIG_TIGON3=m +CONFIG_TIGON3=y # CONFIG_BNX2 is not set # CONFIG_MV643XX_ETH is not set @@ -861,8 +808,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_KEYWEST=y -CONFIG_I2C_PMAC_SMU=y +CONFIG_I2C_POWERMAC=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -895,6 +841,12 @@ CONFIG_I2C_PMAC_SMU=y # CONFIG_I2C_DEBUG_CHIP is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -961,7 +913,6 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_VIRTUAL is not set @@ -1008,9 +959,10 @@ CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set -CONFIG_SND_GENERIC_DRIVER=y # # Generic devices @@ -1024,6 +976,8 @@ CONFIG_SND_GENERIC_DRIVER=y # # PCI devices # +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS4000 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -1032,39 +986,38 @@ CONFIG_SND_GENERIC_DRIVER=y # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set -# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set -# CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set -# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_YMFPCI is not set # # ALSA PowerMac devices @@ -1136,13 +1089,16 @@ CONFIG_USB_STORAGE_DPCM=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y +# CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set CONFIG_HID_FF=y CONFIG_HID_PID=y CONFIG_LOGITECH_FF=y @@ -1159,6 +1115,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -1207,6 +1164,7 @@ CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_ANYDATA is not set CONFIG_USB_SERIAL_BELKIN=m +# CONFIG_USB_SERIAL_WHITEHEAT is not set CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m # CONFIG_USB_SERIAL_CP2101 is not set CONFIG_USB_SERIAL_CYPRESS_M8=m @@ -1288,6 +1246,10 @@ CONFIG_USB_EZUSB=y # # +# EDAC - error detection and reporting (RAS) +# + +# # File systems # CONFIG_EXT2_FS=y @@ -1317,6 +1279,7 @@ CONFIG_XFS_EXPORT=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -1357,6 +1320,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1426,6 +1390,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # @@ -1481,10 +1446,6 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m # # Instrumentation Support @@ -1497,24 +1458,31 @@ CONFIG_OPROFILE=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y # CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUGGER is not set CONFIG_IRQSTACKS=y CONFIG_BOOTX_TEXT=y +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set # # Security options diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 6f6c6bed1aa..0362a70aa97 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc5 -# Tue Dec 20 15:59:38 2005 +# Linux kernel version: 2.6.16-rc2 +# Fri Feb 10 17:32:14 2006 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -16,6 +16,10 @@ CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +CONFIG_GENERIC_TBSYNC=y +# CONFIG_DEFAULT_UIMAGE is not set # # Processor support @@ -33,7 +37,6 @@ CONFIG_NR_CPUS=32 # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -48,8 +51,6 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CPUSETS=y @@ -59,8 +60,10 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -69,8 +72,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -113,7 +118,6 @@ CONFIG_PPC_PMAC=y CONFIG_PPC_PMAC64=y CONFIG_PPC_MAPLE=y # CONFIG_PPC_CELL is not set -CONFIG_PPC_OF=y CONFIG_XICS=y CONFIG_U3_DART=y CONFIG_MPIC=y @@ -124,8 +128,8 @@ CONFIG_RTAS_FLASH=m # CONFIG_MMIO_NVRAM is not set CONFIG_MPIC_BROKEN_U3=y CONFIG_IBMVIO=y +# CONFIG_IBMEBUS is not set # CONFIG_PPC_MPC106 is not set -CONFIG_GENERIC_TBSYNC=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set @@ -158,6 +162,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y CONFIG_HOTPLUG_CPU=y CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y CONFIG_PPC_SPLPAR=y CONFIG_EEH=y @@ -178,6 +183,7 @@ CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y # CONFIG_MEMORY_HOTPLUG is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_PPC_64K_PAGES is not set # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y @@ -221,6 +227,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -260,6 +267,7 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK=y CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NETFILTER_XTABLES is not set # # IP: Netfilter Configuration @@ -277,65 +285,6 @@ CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -CONFIG_IP_NF_MATCH_DCCP=m -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_CONNBYTES=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m # # DCCP Configuration (EXPERIMENTAL) @@ -346,6 +295,11 @@ CONFIG_IP_NF_ARP_MANGLE=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -364,7 +318,6 @@ CONFIG_LLC=y # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y # # Network testing @@ -572,13 +525,7 @@ CONFIG_SCSI_IPR_TRACE=y CONFIG_SCSI_IPR_DUMP=y # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -CONFIG_SCSI_QLA21XX=m -CONFIG_SCSI_QLA22XX=m -CONFIG_SCSI_QLA2300=m -CONFIG_SCSI_QLA2322=m -CONFIG_SCSI_QLA6312=m -CONFIG_SCSI_QLA24XX=m +# CONFIG_SCSI_QLA_FC is not set CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -642,8 +589,6 @@ CONFIG_IEEE1394_SBP2=m CONFIG_IEEE1394_ETH1394=m CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_RAWIO=y -CONFIG_IEEE1394_CMP=m -CONFIG_IEEE1394_AMDTP=m # # I2O device support @@ -659,6 +604,7 @@ CONFIG_THERM_PM72=y CONFIG_WINDFARM=y CONFIG_WINDFARM_PM81=y CONFIG_WINDFARM_PM91=y +CONFIG_WINDFARM_PM112=y # # Network device support @@ -731,6 +677,7 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y @@ -853,6 +800,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -880,6 +828,7 @@ CONFIG_HVCS=m # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -923,8 +872,7 @@ CONFIG_I2C_AMD8111=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_KEYWEST=y -CONFIG_I2C_PMAC_SMU=y +CONFIG_I2C_POWERMAC=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -957,6 +905,12 @@ CONFIG_I2C_PMAC_SMU=y # CONFIG_I2C_DEBUG_CHIP is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -1028,7 +982,6 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_VIRTUAL is not set @@ -1073,9 +1026,10 @@ CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set -CONFIG_SND_GENERIC_DRIVER=y # # Generic devices @@ -1089,6 +1043,8 @@ CONFIG_SND_GENERIC_DRIVER=y # # PCI devices # +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS4000 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -1097,39 +1053,38 @@ CONFIG_SND_GENERIC_DRIVER=y # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set -# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set -# CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set -# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_YMFPCI is not set # # ALSA PowerMac devices @@ -1201,13 +1156,16 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y # CONFIG_USB_AIPTEK is not set @@ -1221,6 +1179,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -1307,6 +1266,10 @@ CONFIG_INFINIBAND_IPOIB=m # # +# EDAC - error detection and reporting (RAS) +# + +# # File systems # CONFIG_EXT2_FS=y @@ -1340,6 +1303,7 @@ CONFIG_XFS_EXPORT=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -1379,6 +1343,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1449,6 +1414,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # @@ -1504,10 +1470,6 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m # # Instrumentation Support @@ -1520,18 +1482,20 @@ CONFIG_OPROFILE=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y # CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y @@ -1540,6 +1504,11 @@ CONFIG_XMON=y # CONFIG_XMON_DEFAULT is not set CONFIG_IRQSTACKS=y CONFIG_BOOTX_TEXT=y +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set # # Security options diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index aa9893a1f6e..daaf038a1fa 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc5 -# Tue Dec 20 15:59:40 2005 +# Linux kernel version: 2.6.16-rc2 +# Fri Feb 10 17:33:32 2006 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -16,6 +16,10 @@ CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +# CONFIG_DEFAULT_UIMAGE is not set # # Processor support @@ -33,7 +37,6 @@ CONFIG_NR_CPUS=128 # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -49,8 +52,6 @@ CONFIG_POSIX_MQUEUE=y CONFIG_SYSCTL=y CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CPUSETS=y @@ -60,8 +61,10 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -70,8 +73,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -113,7 +118,6 @@ CONFIG_PPC_PSERIES=y # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set # CONFIG_PPC_CELL is not set -CONFIG_PPC_OF=y CONFIG_XICS=y # CONFIG_U3_DART is not set CONFIG_MPIC=y @@ -123,8 +127,8 @@ CONFIG_RTAS_PROC=y CONFIG_RTAS_FLASH=m # CONFIG_MMIO_NVRAM is not set CONFIG_IBMVIO=y +# CONFIG_IBMEBUS is not set # CONFIG_PPC_MPC106 is not set -# CONFIG_GENERIC_TBSYNC is not set # CONFIG_CPU_FREQ is not set # CONFIG_WANT_EARLY_SERIAL is not set @@ -145,6 +149,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y CONFIG_HOTPLUG_CPU=y CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y CONFIG_PPC_SPLPAR=y CONFIG_EEH=y @@ -165,6 +170,7 @@ CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y # CONFIG_MEMORY_HOTPLUG is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y # CONFIG_PPC_64K_PAGES is not set CONFIG_SCHED_SMT=y @@ -209,6 +215,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -248,6 +255,7 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK=y CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NETFILTER_XTABLES is not set # # IP: Netfilter Configuration @@ -265,65 +273,6 @@ CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -# CONFIG_IP_NF_MATCH_DCCP is not set -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_CONNBYTES=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m # # DCCP Configuration (EXPERIMENTAL) @@ -334,6 +283,11 @@ CONFIG_IP_NF_ARP_MANGLE=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -352,7 +306,6 @@ CONFIG_LLC=y # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y # # Network testing @@ -550,13 +503,7 @@ CONFIG_SCSI_IPR_TRACE=y CONFIG_SCSI_IPR_DUMP=y # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -CONFIG_SCSI_QLA21XX=m -CONFIG_SCSI_QLA22XX=m -CONFIG_SCSI_QLA2300=m -CONFIG_SCSI_QLA2322=m -CONFIG_SCSI_QLA6312=m -CONFIG_SCSI_QLA24XX=m +# CONFIG_SCSI_QLA_FC is not set CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -678,6 +625,7 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y @@ -803,6 +751,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -909,6 +858,12 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_DEBUG_CHIP is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -976,7 +931,6 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_VIRTUAL is not set @@ -1061,12 +1015,15 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y # CONFIG_USB_AIPTEK is not set @@ -1080,6 +1037,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -1167,6 +1125,10 @@ CONFIG_INFINIBAND_IPOIB=m # # +# EDAC - error detection and reporting (RAS) +# + +# # File systems # CONFIG_EXT2_FS=y @@ -1200,6 +1162,7 @@ CONFIG_XFS_EXPORT=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -1240,6 +1203,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1351,10 +1315,6 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m # # Instrumentation Support @@ -1367,18 +1327,20 @@ CONFIG_OPROFILE=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y # CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y @@ -1387,6 +1349,11 @@ CONFIG_XMON=y CONFIG_XMON_DEFAULT=y CONFIG_IRQSTACKS=y # CONFIG_BOOTX_TEXT is not set +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set # # Security options diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c index 8c21d378f5d..778f22fd85d 100644 --- a/arch/powerpc/kernel/crash.c +++ b/arch/powerpc/kernel/crash.c @@ -134,8 +134,10 @@ static void crash_kexec_prepare_cpus(void) * the crash CPU will send an IPI and wait for other CPUs to * respond. If not, proceed the kexec boot even though we failed to * capture other CPU states. + * Delay of at least 10 seconds. */ - msecs = 1000000; + printk(KERN_ALERT "Sending IPI to other cpus...\n"); + msecs = 10000; while ((atomic_read(&waiting_for_crash_ipi) > 0) && (--msecs > 0)) { barrier(); mdelay(1); diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index 03b25f9359f..a0579e859b2 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -714,6 +714,7 @@ AltiVecUnavailable: #ifdef CONFIG_ALTIVEC bne load_up_altivec /* if from user, just load it up */ #endif /* CONFIG_ALTIVEC */ + addi r3,r1,STACK_FRAME_OVERHEAD EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception) PerformanceMonitor: diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 7ebb73665e9..2b21ec49928 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -137,7 +137,7 @@ _GLOBAL(__secondary_hold) ori r24,r24,MSR_RI mtmsrd r24 /* RI on */ - /* Grab our linux cpu number */ + /* Grab our physical cpu number */ mr r24,r3 /* Tell the master cpu we're here */ @@ -151,12 +151,7 @@ _GLOBAL(__secondary_hold) cmpdi 0,r4,1 bne 100b -#ifdef CONFIG_HMT - SET_REG_IMMEDIATE(r4, .hmt_init) - mtctr r4 - bctr -#else -#ifdef CONFIG_SMP +#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC) LOAD_REG_IMMEDIATE(r4, .pSeries_secondary_smp_init) mtctr r4 mr r3,r24 @@ -164,7 +159,6 @@ _GLOBAL(__secondary_hold) #else BUG_OPCODE #endif -#endif /* This value is used to mark exception frames on the stack. */ .section ".toc","aw" @@ -319,7 +313,6 @@ exception_marker: label##_pSeries: \ HMT_MEDIUM; \ mtspr SPRN_SPRG1,r13; /* save r13 */ \ - RUNLATCH_ON(r13); \ EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) #define STD_EXCEPTION_ISERIES(n, label, area) \ @@ -327,7 +320,6 @@ label##_pSeries: \ label##_iSeries: \ HMT_MEDIUM; \ mtspr SPRN_SPRG1,r13; /* save r13 */ \ - RUNLATCH_ON(r13); \ EXCEPTION_PROLOG_ISERIES_1(area); \ EXCEPTION_PROLOG_ISERIES_2; \ b label##_common @@ -337,7 +329,6 @@ label##_iSeries: \ label##_iSeries: \ HMT_MEDIUM; \ mtspr SPRN_SPRG1,r13; /* save r13 */ \ - RUNLATCH_ON(r13); \ EXCEPTION_PROLOG_ISERIES_1(PACA_EXGEN); \ lbz r10,PACAPROCENABLED(r13); \ cmpwi 0,r10,0; \ @@ -390,6 +381,7 @@ label##_common: \ label##_common: \ EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ DISABLE_INTS; \ + bl .ppc64_runlatch_on; \ addi r3,r1,STACK_FRAME_OVERHEAD; \ bl hdlr; \ b .ret_from_except_lite @@ -407,7 +399,6 @@ __start_interrupts: _machine_check_pSeries: HMT_MEDIUM mtspr SPRN_SPRG1,r13 /* save r13 */ - RUNLATCH_ON(r13) EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) . = 0x300 @@ -434,7 +425,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB) data_access_slb_pSeries: HMT_MEDIUM mtspr SPRN_SPRG1,r13 - RUNLATCH_ON(r13) mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ std r3,PACA_EXSLB+EX_R3(r13) mfspr r3,SPRN_DAR @@ -460,7 +450,6 @@ data_access_slb_pSeries: instruction_access_slb_pSeries: HMT_MEDIUM mtspr SPRN_SPRG1,r13 - RUNLATCH_ON(r13) mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ std r3,PACA_EXSLB+EX_R3(r13) mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */ @@ -491,7 +480,6 @@ instruction_access_slb_pSeries: .globl system_call_pSeries system_call_pSeries: HMT_MEDIUM - RUNLATCH_ON(r9) mr r9,r13 mfmsr r10 mfspr r13,SPRN_SPRG3 @@ -575,7 +563,6 @@ slb_miss_user_pseries: system_reset_fwnmi: HMT_MEDIUM mtspr SPRN_SPRG1,r13 /* save r13 */ - RUNLATCH_ON(r13) EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common) .globl machine_check_fwnmi @@ -583,7 +570,6 @@ system_reset_fwnmi: machine_check_fwnmi: HMT_MEDIUM mtspr SPRN_SPRG1,r13 /* save r13 */ - RUNLATCH_ON(r13) EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) #ifdef CONFIG_PPC_ISERIES @@ -894,7 +880,6 @@ unrecov_fer: .align 7 .globl data_access_common data_access_common: - RUNLATCH_ON(r10) /* It wont fit in the 0x300 handler */ mfspr r10,SPRN_DAR std r10,PACA_EXGEN+EX_DAR(r13) mfspr r10,SPRN_DSISR @@ -1042,6 +1027,7 @@ hardware_interrupt_common: EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN) hardware_interrupt_entry: DISABLE_INTS + bl .ppc64_runlatch_on addi r3,r1,STACK_FRAME_OVERHEAD bl .do_IRQ b .ret_from_except_lite @@ -1816,22 +1802,6 @@ _STATIC(start_here_multiplatform) ori r6,r6,MSR_RI mtmsrd r6 /* RI on */ -#ifdef CONFIG_HMT - /* Start up the second thread on cpu 0 */ - mfspr r3,SPRN_PVR - srwi r3,r3,16 - cmpwi r3,0x34 /* Pulsar */ - beq 90f - cmpwi r3,0x36 /* Icestar */ - beq 90f - cmpwi r3,0x37 /* SStar */ - beq 90f - b 91f /* HMT not supported */ -90: li r3,0 - bl .hmt_start_secondary -91: -#endif - /* The following gets the stack and TOC set up with the regs */ /* pointing to the real addr of the kernel stack. This is */ /* all done to support the C function call below which sets */ @@ -1945,77 +1915,8 @@ _STATIC(start_here_common) bl .start_kernel -_GLOBAL(hmt_init) -#ifdef CONFIG_HMT - LOAD_REG_IMMEDIATE(r5, hmt_thread_data) - mfspr r7,SPRN_PVR - srwi r7,r7,16 - cmpwi r7,0x34 /* Pulsar */ - beq 90f - cmpwi r7,0x36 /* Icestar */ - beq 91f - cmpwi r7,0x37 /* SStar */ - beq 91f - b 101f -90: mfspr r6,SPRN_PIR - andi. r6,r6,0x1f - b 92f -91: mfspr r6,SPRN_PIR - andi. r6,r6,0x3ff -92: sldi r4,r24,3 - stwx r6,r5,r4 - bl .hmt_start_secondary - b 101f - -__hmt_secondary_hold: - LOAD_REG_IMMEDIATE(r5, hmt_thread_data) - clrldi r5,r5,4 - li r7,0 - mfspr r6,SPRN_PIR - mfspr r8,SPRN_PVR - srwi r8,r8,16 - cmpwi r8,0x34 - bne 93f - andi. r6,r6,0x1f - b 103f -93: andi. r6,r6,0x3f - -103: lwzx r8,r5,r7 - cmpw r8,r6 - beq 104f - addi r7,r7,8 - b 103b - -104: addi r7,r7,4 - lwzx r9,r5,r7 - mr r24,r9 -101: -#endif - mr r3,r24 - b .pSeries_secondary_smp_init - -#ifdef CONFIG_HMT -_GLOBAL(hmt_start_secondary) - LOAD_REG_IMMEDIATE(r4,__hmt_secondary_hold) - clrldi r4,r4,4 - mtspr SPRN_NIADORM, r4 - mfspr r4, SPRN_MSRDORM - li r5, -65 - and r4, r4, r5 - mtspr SPRN_MSRDORM, r4 - lis r4,0xffef - ori r4,r4,0x7403 - mtspr SPRN_TSC, r4 - li r4,0x1f4 - mtspr SPRN_TST, r4 - mfspr r4, SPRN_HID0 - ori r4, r4, 0x1 - mtspr SPRN_HID0, r4 - mfspr r4, SPRN_CTRLF - oris r4, r4, 0x40 - mtspr SPRN_CTRLT, r4 - blr -#endif + /* Not reached */ + BUG_OPCODE /* * We put a few things here that have to be page-aligned. diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index 1ae96a8ed7e..e789fef4eb8 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -341,7 +341,7 @@ static int lparcfg_data(struct seq_file *m, void *v) const char *system_id = ""; unsigned int *lp_index_ptr, lp_index = 0; struct device_node *rtas_node; - int *lrdrp; + int *lrdrp = NULL; rootdn = find_path_device("/"); if (rootdn) { @@ -362,7 +362,9 @@ static int lparcfg_data(struct seq_file *m, void *v) seq_printf(m, "partition_id=%d\n", (int)lp_index); rtas_node = find_path_device("/rtas"); - lrdrp = (int *)get_property(rtas_node, "ibm,lrdr-capacity", NULL); + if (rtas_node) + lrdrp = (int *)get_property(rtas_node, "ibm,lrdr-capacity", + NULL); if (lrdrp == NULL) { partition_potential_processors = vdso_data->processorCount; diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c index d6431440c54..ee166c58664 100644 --- a/arch/powerpc/kernel/machine_kexec_64.c +++ b/arch/powerpc/kernel/machine_kexec_64.c @@ -26,8 +26,6 @@ #include <asm/prom.h> #include <asm/smp.h> -#define HASH_GROUP_SIZE 0x80 /* size of each hash group, asm/mmu.h */ - int default_machine_kexec_prepare(struct kimage *image) { int i; @@ -61,7 +59,7 @@ int default_machine_kexec_prepare(struct kimage *image) */ if (htab_address) { low = __pa(htab_address); - high = low + (htab_hash_mask + 1) * HASH_GROUP_SIZE; + high = low + htab_size_bytes; for (i = 0; i < image->nr_segments; i++) { begin = image->segment[i].mem; @@ -294,7 +292,7 @@ void default_machine_kexec(struct kimage *image) } /* Values we need to export to the second kernel via the device tree. */ -static unsigned long htab_base, htab_size, kernel_end; +static unsigned long htab_base, kernel_end; static struct property htab_base_prop = { .name = "linux,htab-base", @@ -305,7 +303,7 @@ static struct property htab_base_prop = { static struct property htab_size_prop = { .name = "linux,htab-size", .length = sizeof(unsigned long), - .value = (unsigned char *)&htab_size, + .value = (unsigned char *)&htab_size_bytes, }; static struct property kernel_end_prop = { @@ -331,8 +329,6 @@ static void __init export_htab_values(void) htab_base = __pa(htab_address); prom_add_property(node, &htab_base_prop); - - htab_size = 1UL << ppc64_pft_size; prom_add_property(node, &htab_size_prop); out: diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index b212d3e64b8..af32922db65 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -78,15 +78,8 @@ EXPORT_SYMBOL(sys_sigreturn); EXPORT_SYMBOL(strcpy); EXPORT_SYMBOL(strncpy); EXPORT_SYMBOL(strcat); -EXPORT_SYMBOL(strncat); -EXPORT_SYMBOL(strchr); -EXPORT_SYMBOL(strrchr); -EXPORT_SYMBOL(strpbrk); -EXPORT_SYMBOL(strstr); EXPORT_SYMBOL(strlen); -EXPORT_SYMBOL(strnlen); EXPORT_SYMBOL(strcmp); -EXPORT_SYMBOL(strncmp); EXPORT_SYMBOL(strcasecmp); EXPORT_SYMBOL(csum_partial); @@ -184,9 +177,6 @@ EXPORT_SYMBOL(adb_try_handler_change); EXPORT_SYMBOL(cuda_request); EXPORT_SYMBOL(cuda_poll); #endif /* CONFIG_ADB_CUDA */ -#ifdef CONFIG_PPC_PMAC -EXPORT_SYMBOL(sys_ctrler); -#endif #ifdef CONFIG_VT EXPORT_SYMBOL(kd_mksound); #endif @@ -204,7 +194,6 @@ EXPORT_SYMBOL(__lshrdi3); EXPORT_SYMBOL(memcpy); EXPORT_SYMBOL(memset); EXPORT_SYMBOL(memmove); -EXPORT_SYMBOL(memscan); EXPORT_SYMBOL(memcmp); EXPORT_SYMBOL(memchr); @@ -213,7 +202,6 @@ EXPORT_SYMBOL(screen_info); #endif #ifdef CONFIG_PPC32 -EXPORT_SYMBOL(__delay); EXPORT_SYMBOL(timer_interrupt); EXPORT_SYMBOL(irq_desc); EXPORT_SYMBOL(tb_ticks_per_jiffy); @@ -221,10 +209,6 @@ EXPORT_SYMBOL(console_drivers); EXPORT_SYMBOL(cacheable_memcpy); #endif -EXPORT_SYMBOL(__up); -EXPORT_SYMBOL(__down); -EXPORT_SYMBOL(__down_interruptible); - #ifdef CONFIG_8xx EXPORT_SYMBOL(cpm_install_handler); EXPORT_SYMBOL(cpm_free_handler); diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 1201880cab4..dd774c3c930 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -886,3 +886,35 @@ void dump_stack(void) show_stack(current, NULL); } EXPORT_SYMBOL(dump_stack); + +#ifdef CONFIG_PPC64 +void ppc64_runlatch_on(void) +{ + unsigned long ctrl; + + if (cpu_has_feature(CPU_FTR_CTRL) && !test_thread_flag(TIF_RUNLATCH)) { + HMT_medium(); + + ctrl = mfspr(SPRN_CTRLF); + ctrl |= CTRL_RUNLATCH; + mtspr(SPRN_CTRLT, ctrl); + + set_thread_flag(TIF_RUNLATCH); + } +} + +void ppc64_runlatch_off(void) +{ + unsigned long ctrl; + + if (cpu_has_feature(CPU_FTR_CTRL) && test_thread_flag(TIF_RUNLATCH)) { + HMT_medium(); + + clear_thread_flag(TIF_RUNLATCH); + + ctrl = mfspr(SPRN_CTRLF); + ctrl &= ~CTRL_RUNLATCH; + mtspr(SPRN_CTRLT, ctrl); + } +} +#endif diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index ec7153f4d47..d34fe537400 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -205,14 +205,6 @@ static cell_t __initdata regbuf[1024]; #define MAX_CPU_THREADS 2 -/* TO GO */ -#ifdef CONFIG_HMT -struct { - unsigned int pir; - unsigned int threadid; -} hmt_thread_data[NR_CPUS]; -#endif /* CONFIG_HMT */ - /* * Error results ... some OF calls will return "-1" on error, some * will return 0, some will return either. To simplify, here are @@ -1319,10 +1311,6 @@ static void __init prom_hold_cpus(void) */ *spinloop = 0; -#ifdef CONFIG_HMT - for (i = 0; i < NR_CPUS; i++) - RELOC(hmt_thread_data)[i].pir = 0xdeadbeef; -#endif /* look for cpus */ for (node = 0; prom_next_node(&node); ) { type[0] = 0; @@ -1389,32 +1377,6 @@ static void __init prom_hold_cpus(void) /* Reserve cpu #s for secondary threads. They start later. */ cpuid += cpu_threads; } -#ifdef CONFIG_HMT - /* Only enable HMT on processors that provide support. */ - if (__is_processor(PV_PULSAR) || - __is_processor(PV_ICESTAR) || - __is_processor(PV_SSTAR)) { - prom_printf(" starting secondary threads\n"); - - for (i = 0; i < NR_CPUS; i += 2) { - if (!cpu_online(i)) - continue; - - if (i == 0) { - unsigned long pir = mfspr(SPRN_PIR); - if (__is_processor(PV_PULSAR)) { - RELOC(hmt_thread_data)[i].pir = - pir & 0x1f; - } else { - RELOC(hmt_thread_data)[i].pir = - pir & 0x3ff; - } - } - } - } else { - prom_printf("Processor is not HMT capable\n"); - } -#endif if (cpuid > NR_CPUS) prom_printf("WARNING: maximum CPUs (" __stringify(NR_CPUS) diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index a717dff695e..f96c49b03ba 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -311,8 +311,6 @@ void smp_release_cpus(void) DBG(" <- smp_release_cpus()\n"); } -#else -#define smp_release_cpus() #endif /* CONFIG_SMP || CONFIG_KEXEC */ /* @@ -473,10 +471,12 @@ void __init setup_system(void) check_smt_enabled(); smp_setup_cpu_maps(); +#ifdef CONFIG_SMP /* Release secondary cpus out of their spinloops at 0x60 now that * we can map physical -> logical CPU ids */ smp_release_cpus(); +#endif printk("Starting Linux PPC64 %s\n", system_utsname.version); diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c index 475249dc235..cd75ab2908f 100644 --- a/arch/powerpc/kernel/sys_ppc32.c +++ b/arch/powerpc/kernel/sys_ppc32.c @@ -176,7 +176,6 @@ struct timex32 { }; extern int do_adjtimex(struct timex *); -extern void ppc_adjtimex(void); asmlinkage long compat_sys_adjtimex(struct timex32 __user *utp) { @@ -209,9 +208,6 @@ asmlinkage long compat_sys_adjtimex(struct timex32 __user *utp) ret = do_adjtimex(&txc); - /* adjust the conversion of TB to time of day to track adjtimex */ - ppc_adjtimex(); - if(put_user(txc.modes, &utp->modes) || __put_user(txc.offset, &utp->offset) || __put_user(txc.freq, &utp->freq) || diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 1886045a2fd..2a7ddc57937 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -50,6 +50,7 @@ #include <linux/security.h> #include <linux/percpu.h> #include <linux/rtc.h> +#include <linux/jiffies.h> #include <asm/io.h> #include <asm/processor.h> @@ -99,7 +100,15 @@ EXPORT_SYMBOL(tb_ticks_per_usec); unsigned long tb_ticks_per_sec; u64 tb_to_xs; unsigned tb_to_us; -unsigned long processor_freq; + +#define TICKLEN_SCALE (SHIFT_SCALE - 10) +u64 last_tick_len; /* units are ns / 2^TICKLEN_SCALE */ +u64 ticklen_to_xs; /* 0.64 fraction */ + +/* If last_tick_len corresponds to about 1/HZ seconds, then + last_tick_len << TICKLEN_SHIFT will be about 2^63. */ +#define TICKLEN_SHIFT (63 - 30 - TICKLEN_SCALE + SHIFT_HZ) + DEFINE_SPINLOCK(rtc_lock); EXPORT_SYMBOL_GPL(rtc_lock); @@ -113,10 +122,6 @@ extern unsigned long wall_jiffies; extern struct timezone sys_tz; static long timezone_offset; -void ppc_adjtimex(void); - -static unsigned adjusting_time = 0; - unsigned long ppc_proc_freq; unsigned long ppc_tb_freq; @@ -178,8 +183,7 @@ static __inline__ void timer_check_rtc(void) */ if (ppc_md.set_rtc_time && ntp_synced() && xtime.tv_sec - last_rtc_update >= 659 && - abs((xtime.tv_nsec/1000) - (1000000-1000000/HZ)) < 500000/HZ && - jiffies - wall_jiffies == 1) { + abs((xtime.tv_nsec/1000) - (1000000-1000000/HZ)) < 500000/HZ) { struct rtc_time tm; to_tm(xtime.tv_sec + 1 + timezone_offset, &tm); tm.tm_year -= 1900; @@ -226,15 +230,14 @@ void do_gettimeofday(struct timeval *tv) if (__USE_RTC()) { /* do this the old way */ unsigned long flags, seq; - unsigned int sec, nsec, usec, lost; + unsigned int sec, nsec, usec; do { seq = read_seqbegin_irqsave(&xtime_lock, flags); sec = xtime.tv_sec; nsec = xtime.tv_nsec + tb_ticks_since(tb_last_stamp); - lost = jiffies - wall_jiffies; } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); - usec = nsec / 1000 + lost * (1000000 / HZ); + usec = nsec / 1000; while (usec >= 1000000) { usec -= 1000000; ++sec; @@ -248,23 +251,6 @@ void do_gettimeofday(struct timeval *tv) EXPORT_SYMBOL(do_gettimeofday); -/* Synchronize xtime with do_gettimeofday */ - -static inline void timer_sync_xtime(unsigned long cur_tb) -{ -#ifdef CONFIG_PPC64 - /* why do we do this? */ - struct timeval my_tv; - - __do_gettimeofday(&my_tv, cur_tb); - - if (xtime.tv_sec <= my_tv.tv_sec) { - xtime.tv_sec = my_tv.tv_sec; - xtime.tv_nsec = my_tv.tv_usec * 1000; - } -#endif -} - /* * There are two copies of tb_to_xs and stamp_xsec so that no * lock is needed to access and use these values in @@ -323,15 +309,30 @@ static __inline__ void timer_recalc_offset(u64 cur_tb) { unsigned long offset; u64 new_stamp_xsec; + u64 tlen, t2x; if (__USE_RTC()) return; + tlen = current_tick_length(); offset = cur_tb - do_gtod.varp->tb_orig_stamp; - if ((offset & 0x80000000u) == 0) - return; - new_stamp_xsec = do_gtod.varp->stamp_xsec - + mulhdu(offset, do_gtod.varp->tb_to_xs); - update_gtod(cur_tb, new_stamp_xsec, do_gtod.varp->tb_to_xs); + if (tlen == last_tick_len && offset < 0x80000000u) { + /* check that we're still in sync; if not, resync */ + struct timeval tv; + __do_gettimeofday(&tv, cur_tb); + if (tv.tv_sec <= xtime.tv_sec && + (tv.tv_sec < xtime.tv_sec || + tv.tv_usec * 1000 <= xtime.tv_nsec)) + return; + } + if (tlen != last_tick_len) { + t2x = mulhdu(tlen << TICKLEN_SHIFT, ticklen_to_xs); + last_tick_len = tlen; + } else + t2x = do_gtod.varp->tb_to_xs; + new_stamp_xsec = (u64) xtime.tv_nsec * XSEC_PER_SEC; + do_div(new_stamp_xsec, 1000000000); + new_stamp_xsec += (u64) xtime.tv_sec * XSEC_PER_SEC; + update_gtod(cur_tb, new_stamp_xsec, t2x); } #ifdef CONFIG_SMP @@ -462,13 +463,10 @@ void timer_interrupt(struct pt_regs * regs) write_seqlock(&xtime_lock); tb_last_jiffy += tb_ticks_per_jiffy; tb_last_stamp = per_cpu(last_jiffy, cpu); - timer_recalc_offset(tb_last_jiffy); do_timer(regs); - timer_sync_xtime(tb_last_jiffy); + timer_recalc_offset(tb_last_jiffy); timer_check_rtc(); write_sequnlock(&xtime_lock); - if (adjusting_time && (time_adjust == 0)) - ppc_adjtimex(); } next_dec = tb_ticks_per_jiffy - ticks; @@ -492,16 +490,18 @@ void timer_interrupt(struct pt_regs * regs) void wakeup_decrementer(void) { - int i; + unsigned long ticks; - set_dec(tb_ticks_per_jiffy); /* - * We don't expect this to be called on a machine with a 601, - * so using get_tbl is fine. + * The timebase gets saved on sleep and restored on wakeup, + * so all we need to do is to reset the decrementer. */ - tb_last_stamp = tb_last_jiffy = get_tb(); - for_each_cpu(i) - per_cpu(last_jiffy, i) = tb_last_stamp; + ticks = tb_ticks_since(__get_cpu_var(last_jiffy)); + if (ticks < tb_ticks_per_jiffy) + ticks = tb_ticks_per_jiffy - ticks; + else + ticks = 1; + set_dec(ticks); } #ifdef CONFIG_SMP @@ -541,8 +541,8 @@ int do_settimeofday(struct timespec *tv) time_t wtm_sec, new_sec = tv->tv_sec; long wtm_nsec, new_nsec = tv->tv_nsec; unsigned long flags; - long int tb_delta; - u64 new_xsec, tb_delta_xs; + u64 new_xsec; + unsigned long tb_delta; if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) return -EINVAL; @@ -563,9 +563,19 @@ int do_settimeofday(struct timespec *tv) first_settimeofday = 0; } #endif + + /* + * Subtract off the number of nanoseconds since the + * beginning of the last tick. + * Note that since we don't increment jiffies_64 anywhere other + * than in do_timer (since we don't have a lost tick problem), + * wall_jiffies will always be the same as jiffies, + * and therefore the (jiffies - wall_jiffies) computation + * has been removed. + */ tb_delta = tb_ticks_since(tb_last_stamp); - tb_delta += (jiffies - wall_jiffies) * tb_ticks_per_jiffy; - tb_delta_xs = mulhdu(tb_delta, do_gtod.varp->tb_to_xs); + tb_delta = mulhdu(tb_delta, do_gtod.varp->tb_to_xs); /* in xsec */ + new_nsec -= SCALE_XSEC(tb_delta, 1000000000); wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - new_sec); wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - new_nsec); @@ -580,12 +590,12 @@ int do_settimeofday(struct timespec *tv) ntp_clear(); - new_xsec = 0; - if (new_nsec != 0) { - new_xsec = (u64)new_nsec * XSEC_PER_SEC; + new_xsec = xtime.tv_nsec; + if (new_xsec != 0) { + new_xsec *= XSEC_PER_SEC; do_div(new_xsec, NSEC_PER_SEC); } - new_xsec += (u64)new_sec * XSEC_PER_SEC - tb_delta_xs; + new_xsec += (u64)xtime.tv_sec * XSEC_PER_SEC; update_gtod(tb_last_jiffy, new_xsec, do_gtod.varp->tb_to_xs); vdso_data->tz_minuteswest = sys_tz.tz_minuteswest; @@ -671,7 +681,7 @@ void __init time_init(void) unsigned long flags; unsigned long tm = 0; struct div_result res; - u64 scale; + u64 scale, x; unsigned shift; if (ppc_md.time_init != NULL) @@ -693,11 +703,36 @@ void __init time_init(void) } tb_ticks_per_jiffy = ppc_tb_freq / HZ; - tb_ticks_per_sec = tb_ticks_per_jiffy * HZ; + tb_ticks_per_sec = ppc_tb_freq; tb_ticks_per_usec = ppc_tb_freq / 1000000; tb_to_us = mulhwu_scale_factor(ppc_tb_freq, 1000000); - div128_by_32(1024*1024, 0, tb_ticks_per_sec, &res); - tb_to_xs = res.result_low; + + /* + * Calculate the length of each tick in ns. It will not be + * exactly 1e9/HZ unless ppc_tb_freq is divisible by HZ. + * We compute 1e9 * tb_ticks_per_jiffy / ppc_tb_freq, + * rounded up. + */ + x = (u64) NSEC_PER_SEC * tb_ticks_per_jiffy + ppc_tb_freq - 1; + do_div(x, ppc_tb_freq); + tick_nsec = x; + last_tick_len = x << TICKLEN_SCALE; + + /* + * Compute ticklen_to_xs, which is a factor which gets multiplied + * by (last_tick_len << TICKLEN_SHIFT) to get a tb_to_xs value. + * It is computed as: + * ticklen_to_xs = 2^N / (tb_ticks_per_jiffy * 1e9) + * where N = 64 + 20 - TICKLEN_SCALE - TICKLEN_SHIFT + * so as to give the result as a 0.64 fixed-point fraction. + */ + div128_by_32(1ULL << (64 + 20 - TICKLEN_SCALE - TICKLEN_SHIFT), 0, + tb_ticks_per_jiffy, &res); + div128_by_32(res.result_high, res.result_low, NSEC_PER_SEC, &res); + ticklen_to_xs = res.result_low; + + /* Compute tb_to_xs from tick_nsec */ + tb_to_xs = mulhdu(last_tick_len << TICKLEN_SHIFT, ticklen_to_xs); /* * Compute scale factor for sched_clock. @@ -724,6 +759,14 @@ void __init time_init(void) tm = get_boot_time(); write_seqlock_irqsave(&xtime_lock, flags); + + /* If platform provided a timezone (pmac), we correct the time */ + if (timezone_offset) { + sys_tz.tz_minuteswest = -timezone_offset / 60; + sys_tz.tz_dsttime = 0; + tm -= timezone_offset; + } + xtime.tv_sec = tm; xtime.tv_nsec = 0; do_gtod.varp = &do_gtod.vars[0]; @@ -738,18 +781,11 @@ void __init time_init(void) vdso_data->tb_orig_stamp = tb_last_jiffy; vdso_data->tb_update_count = 0; vdso_data->tb_ticks_per_sec = tb_ticks_per_sec; - vdso_data->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC; + vdso_data->stamp_xsec = (u64) xtime.tv_sec * XSEC_PER_SEC; vdso_data->tb_to_xs = tb_to_xs; time_freq = 0; - /* If platform provided a timezone (pmac), we correct the time */ - if (timezone_offset) { - sys_tz.tz_minuteswest = -timezone_offset / 60; - sys_tz.tz_dsttime = 0; - xtime.tv_sec -= timezone_offset; - } - last_rtc_update = xtime.tv_sec; set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec); @@ -759,126 +795,6 @@ void __init time_init(void) set_dec(tb_ticks_per_jiffy); } -/* - * After adjtimex is called, adjust the conversion of tb ticks - * to microseconds to keep do_gettimeofday synchronized - * with ntpd. - * - * Use the time_adjust, time_freq and time_offset computed by adjtimex to - * adjust the frequency. - */ - -/* #define DEBUG_PPC_ADJTIMEX 1 */ - -void ppc_adjtimex(void) -{ -#ifdef CONFIG_PPC64 - unsigned long den, new_tb_ticks_per_sec, tb_ticks, old_xsec, - new_tb_to_xs, new_xsec, new_stamp_xsec; - unsigned long tb_ticks_per_sec_delta; - long delta_freq, ltemp; - struct div_result divres; - unsigned long flags; - long singleshot_ppm = 0; - - /* - * Compute parts per million frequency adjustment to - * accomplish the time adjustment implied by time_offset to be - * applied over the elapsed time indicated by time_constant. - * Use SHIFT_USEC to get it into the same units as - * time_freq. - */ - if ( time_offset < 0 ) { - ltemp = -time_offset; - ltemp <<= SHIFT_USEC - SHIFT_UPDATE; - ltemp >>= SHIFT_KG + time_constant; - ltemp = -ltemp; - } else { - ltemp = time_offset; - ltemp <<= SHIFT_USEC - SHIFT_UPDATE; - ltemp >>= SHIFT_KG + time_constant; - } - - /* If there is a single shot time adjustment in progress */ - if ( time_adjust ) { -#ifdef DEBUG_PPC_ADJTIMEX - printk("ppc_adjtimex: "); - if ( adjusting_time == 0 ) - printk("starting "); - printk("single shot time_adjust = %ld\n", time_adjust); -#endif - - adjusting_time = 1; - - /* - * Compute parts per million frequency adjustment - * to match time_adjust - */ - singleshot_ppm = tickadj * HZ; - /* - * The adjustment should be tickadj*HZ to match the code in - * linux/kernel/timer.c, but experiments show that this is too - * large. 3/4 of tickadj*HZ seems about right - */ - singleshot_ppm -= singleshot_ppm / 4; - /* Use SHIFT_USEC to get it into the same units as time_freq */ - singleshot_ppm <<= SHIFT_USEC; - if ( time_adjust < 0 ) - singleshot_ppm = -singleshot_ppm; - } - else { -#ifdef DEBUG_PPC_ADJTIMEX - if ( adjusting_time ) - printk("ppc_adjtimex: ending single shot time_adjust\n"); -#endif - adjusting_time = 0; - } - - /* Add up all of the frequency adjustments */ - delta_freq = time_freq + ltemp + singleshot_ppm; - - /* - * Compute a new value for tb_ticks_per_sec based on - * the frequency adjustment - */ - den = 1000000 * (1 << (SHIFT_USEC - 8)); - if ( delta_freq < 0 ) { - tb_ticks_per_sec_delta = ( tb_ticks_per_sec * ( (-delta_freq) >> (SHIFT_USEC - 8))) / den; - new_tb_ticks_per_sec = tb_ticks_per_sec + tb_ticks_per_sec_delta; - } - else { - tb_ticks_per_sec_delta = ( tb_ticks_per_sec * ( delta_freq >> (SHIFT_USEC - 8))) / den; - new_tb_ticks_per_sec = tb_ticks_per_sec - tb_ticks_per_sec_delta; - } - -#ifdef DEBUG_PPC_ADJTIMEX - printk("ppc_adjtimex: ltemp = %ld, time_freq = %ld, singleshot_ppm = %ld\n", ltemp, time_freq, singleshot_ppm); - printk("ppc_adjtimex: tb_ticks_per_sec - base = %ld new = %ld\n", tb_ticks_per_sec, new_tb_ticks_per_sec); -#endif - - /* - * Compute a new value of tb_to_xs (used to convert tb to - * microseconds) and a new value of stamp_xsec which is the - * time (in 1/2^20 second units) corresponding to - * tb_orig_stamp. This new value of stamp_xsec compensates - * for the change in frequency (implied by the new tb_to_xs) - * which guarantees that the current time remains the same. - */ - write_seqlock_irqsave( &xtime_lock, flags ); - tb_ticks = get_tb() - do_gtod.varp->tb_orig_stamp; - div128_by_32(1024*1024, 0, new_tb_ticks_per_sec, &divres); - new_tb_to_xs = divres.result_low; - new_xsec = mulhdu(tb_ticks, new_tb_to_xs); - - old_xsec = mulhdu(tb_ticks, do_gtod.varp->tb_to_xs); - new_stamp_xsec = do_gtod.varp->stamp_xsec + old_xsec - new_xsec; - - update_gtod(do_gtod.varp->tb_orig_stamp, new_stamp_xsec, new_tb_to_xs); - - write_sequnlock_irqrestore( &xtime_lock, flags ); -#endif /* CONFIG_PPC64 */ -} - #define FEBRUARY 2 #define STARTOFTIME 1970 diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c index d96bcfe4c6f..33654d1b1b4 100644 --- a/arch/powerpc/mm/hash_native_64.c +++ b/arch/powerpc/mm/hash_native_64.c @@ -403,12 +403,17 @@ static void native_hpte_clear(void) */ hpte_v = hptep->v; + /* + * Call __tlbie() here rather than tlbie() since we + * already hold the native_tlbie_lock. + */ if (hpte_v & HPTE_V_VALID) { hptep->v = 0; - tlbie(slot2va(hpte_v, slot), MMU_PAGE_4K, 0); + __tlbie(slot2va(hpte_v, slot), MMU_PAGE_4K); } } + asm volatile("eieio; tlbsync; ptesync":::"memory"); spin_unlock(&native_tlbie_lock); local_irq_restore(flags); } diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 95b4cd6b65e..ae2c919cbec 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -88,6 +88,7 @@ static unsigned long _SDR1; struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT]; hpte_t *htab_address; +unsigned long htab_size_bytes; unsigned long htab_hash_mask; int mmu_linear_psize = MMU_PAGE_4K; int mmu_virtual_psize = MMU_PAGE_4K; @@ -399,7 +400,7 @@ void create_section_mapping(unsigned long start, unsigned long end) void __init htab_initialize(void) { - unsigned long table, htab_size_bytes; + unsigned long table; unsigned long pteg_count; unsigned long mode_rw; unsigned long base = 0, size = 0; diff --git a/arch/powerpc/oprofile/Kconfig b/arch/powerpc/oprofile/Kconfig index eb2dece76a5..d03c0e5ca87 100644 --- a/arch/powerpc/oprofile/Kconfig +++ b/arch/powerpc/oprofile/Kconfig @@ -1,4 +1,5 @@ config PROFILING + depends on !PPC_ISERIES bool "Profiling support (EXPERIMENTAL)" help Say Y here to enable the extended profiling support mechanisms used diff --git a/arch/powerpc/platforms/iseries/lpevents.c b/arch/powerpc/platforms/iseries/lpevents.c index 0b885300d1d..8ca7b939635 100644 --- a/arch/powerpc/platforms/iseries/lpevents.c +++ b/arch/powerpc/platforms/iseries/lpevents.c @@ -184,6 +184,8 @@ void setup_hvlpevent_queue(void) { void *eventStack; + spin_lock_init(&hvlpevent_queue.lock); + /* Allocate a page for the Event Stack. */ eventStack = alloc_bootmem_pages(LpEventStackSize); memset(eventStack, 0, LpEventStackSize); diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index 3f8790146b0..3ecc4a652d8 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -648,6 +648,7 @@ static void yield_shared_processor(void) * here and let the timer_interrupt code sort out the actual time. */ get_lppaca()->int_dword.fields.decr_int = 1; + ppc64_runlatch_on(); process_iSeries_events(); } diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c index 7d4099a34f9..85d6c93659c 100644 --- a/arch/powerpc/platforms/maple/pci.c +++ b/arch/powerpc/platforms/maple/pci.c @@ -435,8 +435,8 @@ void __init maple_pci_init(void) PCI_DN(np)->busno = 0xf0; } - /* Tell pci.c to use the common resource allocation mecanism */ - pci_probe_only = 0; + /* Tell pci.c to not change any resource allocations. */ + pci_probe_only = 1; /* Allow all IO */ io_page_mask = -1; diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c index 50ed8890dd3..c8b4a2b115a 100644 --- a/arch/powerpc/platforms/powermac/feature.c +++ b/arch/powerpc/platforms/powermac/feature.c @@ -1644,10 +1644,10 @@ static void intrepid_shutdown(struct macio_chip *macio, int sleep_mode) KL0_SCC_CELL_ENABLE); MACIO_BIC(KEYLARGO_FCR1, - /*KL1_USB2_CELL_ENABLE |*/ KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT | KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE | - KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE); + KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE | + KL1_EIDE0_ENABLE); if (pmac_mb.board_flags & PMAC_MB_MOBILE) MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N); @@ -2181,7 +2181,7 @@ static struct pmac_mb_def pmac_mb_defs[] = { }, { "PowerMac10,1", "Mac mini", PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, - PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER, + PMAC_MB_MAY_SLEEP, }, { "iMac,1", "iMac (first generation)", PMAC_TYPE_ORIG_IMAC, paddington_features, @@ -2293,11 +2293,11 @@ static struct pmac_mb_def pmac_mb_defs[] = { }, { "PowerBook5,8", "PowerBook G4 15\"", PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, - PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + PMAC_MB_MAY_SLEEP | PMAC_MB_MOBILE, }, { "PowerBook5,9", "PowerBook G4 17\"", PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, - PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + PMAC_MB_MAY_SLEEP | PMAC_MB_MOBILE, }, { "PowerBook6,1", "PowerBook G4 12\"", PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index e3fc3407bb1..4e5c8f8d869 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -9,13 +9,6 @@ config PPC_SPLPAR processors, that is, which share physical processors between two or more partitions. -config HMT - bool "Hardware multithreading" - depends on SMP && PPC_PSERIES && BROKEN - help - This option enables hardware multithreading on RS64 cpus. - pSeries systems p620 and p660 have such a cpu type. - config EEH bool "PCI Extended Error Handling (EEH)" if EMBEDDED depends on PPC_PSERIES diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 8e6b1ed1396..8d710af5075 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -292,7 +292,7 @@ static inline int __devinit smp_startup_cpu(unsigned int lcpu) if (start_cpu == RTAS_UNKNOWN_SERVICE) return 1; - status = rtas_call(start_cpu, 3, 1, NULL, pcpu, start_here, lcpu); + status = rtas_call(start_cpu, 3, 1, NULL, pcpu, start_here, pcpu); if (status != 0) { printk(KERN_ERR "start-cpu failed: %i\n", status); return 0; diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 4f26304d026..7dcdfcb3c98 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -234,7 +234,7 @@ static void mpic_shutdown_ht_interrupt(struct mpic *mpic, unsigned int source, spin_lock_irqsave(&mpic->fixup_lock, flags); writeb(0x10 + 2 * fixup->index, fixup->base + 2); tmp = readl(fixup->base + 4); - tmp &= ~1U; + tmp |= 1; writel(tmp, fixup->base + 4); spin_unlock_irqrestore(&mpic->fixup_lock, flags); } @@ -446,14 +446,15 @@ static unsigned int mpic_startup_irq(unsigned int irq) #ifdef CONFIG_MPIC_BROKEN_U3 struct mpic *mpic = mpic_from_irq(irq); unsigned int src = irq - mpic->irq_offset; +#endif /* CONFIG_MPIC_BROKEN_U3 */ + + mpic_enable_irq(irq); +#ifdef CONFIG_MPIC_BROKEN_U3 if (mpic_is_ht_interrupt(mpic, src)) mpic_startup_ht_interrupt(mpic, src, irq_desc[irq].status); - #endif /* CONFIG_MPIC_BROKEN_U3 */ - mpic_enable_irq(irq); - return 0; } |