4 files changed, 93 insertions, 14 deletions

diff --git a/arch/powerpc/sysdev/bestcomm/Kconfig b/arch/powerpc/sysdev/bestcomm/Kconfig
index 57cc5656256..0b192a1c429 100644
--- a/arch/powerpc/sysdev/bestcomm/Kconfig
+++ b/arch/powerpc/sysdev/bestcomm/Kconfig
@@ -17,23 +17,20 @@ config PPC_BESTCOMM
 	  answer Y or M. Otherwise say N.
 
 config PPC_BESTCOMM_ATA
-	tristate "Bestcomm ATA task support"
+	tristate
 	depends on PPC_BESTCOMM
-	default n
 	help
 	  This option enables the support for the ATA task.
 
 config PPC_BESTCOMM_FEC
-	tristate "Bestcomm FEC tasks support"
+	tristate
 	depends on PPC_BESTCOMM
-	default n
 	help
 	  This option enables the support for the FEC tasks.
 
 config PPC_BESTCOMM_GEN_BD
-	tristate "Bestcomm GenBD tasks support"
+	tristate
 	depends on PPC_BESTCOMM
-	default n
 	help
 	  This option enables the support for the GenBD tasks.
 
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 01b884b2569..26ecb96f973 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -223,6 +223,8 @@ static int gfar_mdio_of_init_one(struct device_node *np)
 	if (ret)
 		return ret;
 
+	/* The gianfar device will try to use the same ID created below to find
+	 * this bus, to coordinate register access (since they share).  */
 	mdio_dev = platform_device_register_simple("fsl-gianfar_mdio",
 			res.start&0xfffff, &res, 1);
 	if (IS_ERR(mdio_dev))
@@ -394,6 +396,30 @@ static int __init gfar_of_init(void)
 			of_node_put(mdio);
 		}
 
+		/* Get MDIO bus controlled by this eTSEC, if any.  Normally only
+		 * eTSEC 1 will control an MDIO bus, not necessarily the same
+		 * bus that its PHY is on ('mdio' above), so we can't just use
+		 * that.  What we do is look for a gianfar mdio device that has
+		 * overlapping registers with this device.  That's really the
+		 * whole point, to find the device sharing our registers to
+		 * coordinate access with it.
+		 */
+		for_each_compatible_node(mdio, NULL, "fsl,gianfar-mdio") {
+			if (of_address_to_resource(mdio, 0, &res))
+				continue;
+
+			if (res.start >= r[0].start && res.end <= r[0].end) {
+				/* Get the ID the mdio bus platform device was
+				 * registered with.  gfar_data.bus_id is
+				 * different because it's for finding a PHY,
+				 * while this is for finding a MII bus.
+				 */
+				gfar_data.mdio_bus = res.start&0xfffff;
+				of_node_put(mdio);
+				break;
+			}
+		}
+
 		ret =
 		    platform_device_add_data(gfar_dev, &gfar_data,
 					     sizeof(struct
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 8e3478c995e..1890fb085cd 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -563,6 +563,51 @@ static void __init mpic_scan_ht_pics(struct mpic *mpic)
 
 #endif /* CONFIG_MPIC_U3_HT_IRQS */
 
+#ifdef CONFIG_SMP
+static int irq_choose_cpu(unsigned int virt_irq)
+{
+	cpumask_t mask = irq_desc[virt_irq].affinity;
+	int cpuid;
+
+	if (cpus_equal(mask, CPU_MASK_ALL)) {
+		static int irq_rover;
+		static DEFINE_SPINLOCK(irq_rover_lock);
+		unsigned long flags;
+
+		/* Round-robin distribution... */
+	do_round_robin:
+		spin_lock_irqsave(&irq_rover_lock, flags);
+
+		while (!cpu_online(irq_rover)) {
+			if (++irq_rover >= NR_CPUS)
+				irq_rover = 0;
+		}
+		cpuid = irq_rover;
+		do {
+			if (++irq_rover >= NR_CPUS)
+				irq_rover = 0;
+		} while (!cpu_online(irq_rover));
+
+		spin_unlock_irqrestore(&irq_rover_lock, flags);
+	} else {
+		cpumask_t tmp;
+
+		cpus_and(tmp, cpu_online_map, mask);
+
+		if (cpus_empty(tmp))
+			goto do_round_robin;
+
+		cpuid = first_cpu(tmp);
+	}
+
+	return get_hard_smp_processor_id(cpuid);
+}
+#else
+static int irq_choose_cpu(unsigned int virt_irq)
+{
+	return hard_smp_processor_id();
+}
+#endif
 
 #define mpic_irq_to_hw(virq)	((unsigned int)irq_map[virq].hwirq)
 
@@ -777,12 +822,18 @@ void mpic_set_affinity(unsigned int irq, cpumask_t cpumask)
 	struct mpic *mpic = mpic_from_irq(irq);
 	unsigned int src = mpic_irq_to_hw(irq);
 
-	cpumask_t tmp;
+	if (mpic->flags & MPIC_SINGLE_DEST_CPU) {
+		int cpuid = irq_choose_cpu(irq);
+
+		mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION), 1 << cpuid);
+	} else {
+		cpumask_t tmp;
 
-	cpus_and(tmp, cpumask, cpu_online_map);
+		cpus_and(tmp, cpumask, cpu_online_map);
 
-	mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION),
-		       mpic_physmask(cpus_addr(tmp)[0]));	
+		mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION),
+			       mpic_physmask(cpus_addr(tmp)[0]));
+	}
 }
 
 static unsigned int mpic_type_to_vecpri(struct mpic *mpic, unsigned int type)
@@ -1220,6 +1271,7 @@ void __init mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count)
 void __init mpic_init(struct mpic *mpic)
 {
 	int i;
+	int cpu;
 
 	BUG_ON(mpic->num_sources == 0);
 
@@ -1262,6 +1314,11 @@ void __init mpic_init(struct mpic *mpic)
 
 	mpic_pasemi_msi_init(mpic);
 
+	if (mpic->flags & MPIC_PRIMARY)
+		cpu = hard_smp_processor_id();
+	else
+		cpu = 0;
+
 	for (i = 0; i < mpic->num_sources; i++) {
 		/* start with vector = source number, and masked */
 		u32 vecpri = MPIC_VECPRI_MASK | i |
@@ -1272,8 +1329,7 @@ void __init mpic_init(struct mpic *mpic)
 			continue;
 		/* init hw */
 		mpic_irq_write(i, MPIC_INFO(IRQ_VECTOR_PRI), vecpri);
-		mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION),
-			       1 << hard_smp_processor_id());
+		mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION), 1 << cpu);
 	}
 	
 	/* Init spurious vector */
diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c
index b7aefd0d45c..a22e1a2df1a 100644
--- a/arch/powerpc/sysdev/xilinx_intc.c
+++ b/arch/powerpc/sysdev/xilinx_intc.c
@@ -107,8 +107,8 @@ xilinx_intc_init(struct device_node *np)
 	}
 	regs = ioremap(res.start, 32);
 
-	printk(KERN_INFO "Xilinx intc at 0x%08LX mapped to 0x%p\n",
-		res.start, regs);
+	printk(KERN_INFO "Xilinx intc at 0x%08llx mapped to 0x%p\n",
+		(unsigned long long) res.start, regs);
 
 	/* Setup interrupt controller */
 	out_be32(regs + XINTC_IER, 0); /* disable all irqs */