diff options
Diffstat (limited to 'arch/powerpc/platforms')
42 files changed, 340 insertions, 337 deletions
diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig index f39c953d535..a6e43cb6f82 100644 --- a/arch/powerpc/platforms/40x/Kconfig +++ b/arch/powerpc/platforms/40x/Kconfig @@ -45,6 +45,7 @@ config KILAUEA depends on 40x default n select 405EX + select PPC40x_SIMPLE select PPC4xx_PCI_EXPRESS help This option enables support for the AMCC PPC405EX evaluation board. @@ -56,6 +57,7 @@ config MAKALU select 405EX select PCI select PPC4xx_PCI_EXPRESS + select PPC40x_SIMPLE help This option enables support for the AMCC PPC405EX board. diff --git a/arch/powerpc/platforms/40x/Makefile b/arch/powerpc/platforms/40x/Makefile index 9bab76a652a..56e89004c46 100644 --- a/arch/powerpc/platforms/40x/Makefile +++ b/arch/powerpc/platforms/40x/Makefile @@ -1,6 +1,4 @@ -obj-$(CONFIG_KILAUEA) += kilauea.o obj-$(CONFIG_HCU4) += hcu4.o -obj-$(CONFIG_MAKALU) += makalu.o obj-$(CONFIG_WALNUT) += walnut.o obj-$(CONFIG_XILINX_VIRTEX_GENERIC_BOARD) += virtex.o obj-$(CONFIG_EP405) += ep405.o diff --git a/arch/powerpc/platforms/40x/kilauea.c b/arch/powerpc/platforms/40x/kilauea.c deleted file mode 100644 index fd7d934dac8..00000000000 --- a/arch/powerpc/platforms/40x/kilauea.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Kilauea board specific routines - * - * Copyright 2007-2008 DENX Software Engineering, Stefan Roese <sr@denx.de> - * - * Based on the Walnut code by - * Josh Boyer <jwboyer@linux.vnet.ibm.com> - * Copyright 2007 IBM Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/init.h> -#include <linux/of_platform.h> -#include <asm/machdep.h> -#include <asm/prom.h> -#include <asm/udbg.h> -#include <asm/time.h> -#include <asm/uic.h> -#include <asm/pci-bridge.h> -#include <asm/ppc4xx.h> - -static __initdata struct of_device_id kilauea_of_bus[] = { - { .compatible = "ibm,plb4", }, - { .compatible = "ibm,opb", }, - { .compatible = "ibm,ebc", }, - {}, -}; - -static int __init kilauea_device_probe(void) -{ - of_platform_bus_probe(NULL, kilauea_of_bus, NULL); - - return 0; -} -machine_device_initcall(kilauea, kilauea_device_probe); - -static int __init kilauea_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); - - if (!of_flat_dt_is_compatible(root, "amcc,kilauea")) - return 0; - - ppc_pci_set_flags(PPC_PCI_REASSIGN_ALL_RSRC); - - return 1; -} - -define_machine(kilauea) { - .name = "Kilauea", - .probe = kilauea_probe, - .progress = udbg_progress, - .init_IRQ = uic_init_tree, - .get_irq = uic_get_irq, - .restart = ppc4xx_reset_system, - .calibrate_decr = generic_calibrate_decr, -}; diff --git a/arch/powerpc/platforms/40x/makalu.c b/arch/powerpc/platforms/40x/makalu.c deleted file mode 100644 index a6a1d6017b7..00000000000 --- a/arch/powerpc/platforms/40x/makalu.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Makalu board specific routines - * - * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de> - * - * Based on the Walnut code by - * Josh Boyer <jwboyer@linux.vnet.ibm.com> - * Copyright 2007 IBM Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/init.h> -#include <linux/of_platform.h> -#include <asm/machdep.h> -#include <asm/prom.h> -#include <asm/udbg.h> -#include <asm/time.h> -#include <asm/uic.h> -#include <asm/pci-bridge.h> -#include <asm/ppc4xx.h> - -static __initdata struct of_device_id makalu_of_bus[] = { - { .compatible = "ibm,plb4", }, - { .compatible = "ibm,opb", }, - { .compatible = "ibm,ebc", }, - {}, -}; - -static int __init makalu_device_probe(void) -{ - of_platform_bus_probe(NULL, makalu_of_bus, NULL); - - return 0; -} -machine_device_initcall(makalu, makalu_device_probe); - -static int __init makalu_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); - - if (!of_flat_dt_is_compatible(root, "amcc,makalu")) - return 0; - - ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC; - - return 1; -} - -define_machine(makalu) { - .name = "Makalu", - .probe = makalu_probe, - .progress = udbg_progress, - .init_IRQ = uic_init_tree, - .get_irq = uic_get_irq, - .restart = ppc4xx_reset_system, - .calibrate_decr = generic_calibrate_decr, -}; diff --git a/arch/powerpc/platforms/40x/ppc40x_simple.c b/arch/powerpc/platforms/40x/ppc40x_simple.c index f40ac9b8f99..5fd5a597400 100644 --- a/arch/powerpc/platforms/40x/ppc40x_simple.c +++ b/arch/powerpc/platforms/40x/ppc40x_simple.c @@ -51,7 +51,10 @@ machine_device_initcall(ppc40x_simple, ppc40x_device_probe); * board.c file for it rather than adding it to this list. */ static char *board[] __initdata = { - "amcc,acadia" + "amcc,acadia", + "amcc,haleakala", + "amcc,kilauea", + "amcc,makalu" }; static int __init ppc40x_probe(void) diff --git a/arch/powerpc/platforms/40x/virtex.c b/arch/powerpc/platforms/40x/virtex.c index fc7fb001276..d0fc6866b00 100644 --- a/arch/powerpc/platforms/40x/virtex.c +++ b/arch/powerpc/platforms/40x/virtex.c @@ -14,6 +14,7 @@ #include <asm/prom.h> #include <asm/time.h> #include <asm/xilinx_intc.h> +#include <asm/xilinx_pci.h> #include <asm/ppc4xx.h> static struct of_device_id xilinx_of_bus_ids[] __initdata = { @@ -47,6 +48,7 @@ static int __init virtex_probe(void) define_machine(virtex) { .name = "Xilinx Virtex", .probe = virtex_probe, + .setup_arch = xilinx_pci_init, .init_IRQ = xilinx_intc_init_tree, .get_irq = xilinx_intc_get_irq, .restart = ppc4xx_reset_system, diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 0d83a6a0397..90e3192611a 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -156,7 +156,7 @@ config YOSEMITE # This option enables support for the IBM PPC440GX evaluation board. config XILINX_VIRTEX440_GENERIC_BOARD - bool "Generic Xilinx Virtex 440 board" + bool "Generic Xilinx Virtex 5 FXT board support" depends on 44x default n select XILINX_VIRTEX_5_FXT @@ -171,6 +171,17 @@ config XILINX_VIRTEX440_GENERIC_BOARD Most Virtex 5 designs should use this unless it needs to do some special configuration at board probe time. +config XILINX_ML510 + bool "Xilinx ML510 extra support" + depends on XILINX_VIRTEX440_GENERIC_BOARD + select PPC_PCI_CHOICE + select XILINX_PCI if PCI + select PPC_INDIRECT_PCI if PCI + select PPC_I8259 if PCI + help + This option enables extra support for features on the Xilinx ML510 + board. The ML510 has a PCI bus with ALI south bridge. + config PPC44x_SIMPLE bool "Simple PowerPC 44x board support" depends on 44x diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile index 01f51daace1..ee6185aeaa3 100644 --- a/arch/powerpc/platforms/44x/Makefile +++ b/arch/powerpc/platforms/44x/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_EBONY) += ebony.o obj-$(CONFIG_SAM440EP) += sam440ep.o obj-$(CONFIG_WARP) += warp.o obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o +obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o diff --git a/arch/powerpc/platforms/44x/virtex.c b/arch/powerpc/platforms/44x/virtex.c index 68637faf70a..cf96ccaa760 100644 --- a/arch/powerpc/platforms/44x/virtex.c +++ b/arch/powerpc/platforms/44x/virtex.c @@ -16,6 +16,7 @@ #include <asm/prom.h> #include <asm/time.h> #include <asm/xilinx_intc.h> +#include <asm/xilinx_pci.h> #include <asm/reg.h> #include <asm/ppc4xx.h> #include "44x.h" @@ -53,6 +54,7 @@ static int __init virtex_probe(void) define_machine(virtex) { .name = "Xilinx Virtex440", .probe = virtex_probe, + .setup_arch = xilinx_pci_init, .init_IRQ = xilinx_intc_init_tree, .get_irq = xilinx_intc_get_irq, .calibrate_decr = generic_calibrate_decr, diff --git a/arch/powerpc/platforms/44x/virtex_ml510.c b/arch/powerpc/platforms/44x/virtex_ml510.c new file mode 100644 index 00000000000..ba4a6e388a4 --- /dev/null +++ b/arch/powerpc/platforms/44x/virtex_ml510.c @@ -0,0 +1,29 @@ +#include <asm/i8259.h> +#include <linux/pci.h> +#include "44x.h" + +/** + * ml510_ail_quirk + */ +static void __devinit ml510_ali_quirk(struct pci_dev *dev) +{ + /* Enable the IDE controller */ + pci_write_config_byte(dev, 0x58, 0x4c); + /* Assign irq 14 to the primary ide channel */ + pci_write_config_byte(dev, 0x44, 0x0d); + /* Assign irq 15 to the secondary ide channel */ + pci_write_config_byte(dev, 0x75, 0x0f); + /* Set the ide controller in native mode */ + pci_write_config_byte(dev, 0x09, 0xff); + + /* INTB = disabled, INTA = disabled */ + pci_write_config_byte(dev, 0x48, 0x00); + /* INTD = disabled, INTC = disabled */ + pci_write_config_byte(dev, 0x4a, 0x00); + /* Audio = INT7, Modem = disabled. */ + pci_write_config_byte(dev, 0x4b, 0x60); + /* USB = INT7 */ + pci_write_config_byte(dev, 0x74, 0x06); +} +DECLARE_PCI_FIXUP_EARLY(0x10b9, 0x1533, ml510_ali_quirk); + diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c index 960edf89be5..c5118802a28 100644 --- a/arch/powerpc/platforms/44x/warp.c +++ b/arch/powerpc/platforms/44x/warp.c @@ -1,7 +1,7 @@ /* * PIKA Warp(tm) board specific routines * - * Copyright (c) 2008 PIKA Technologies + * Copyright (c) 2008-2009 PIKA Technologies * Sean MacLennan <smaclennan@pikatech.com> * * This program is free software; you can redistribute it and/or modify it @@ -15,6 +15,7 @@ #include <linux/i2c.h> #include <linux/interrupt.h> #include <linux/delay.h> +#include <linux/of_gpio.h> #include <asm/machdep.h> #include <asm/prom.h> @@ -23,6 +24,7 @@ #include <asm/uic.h> #include <asm/ppc4xx.h> + static __initdata struct of_device_id warp_of_bus[] = { { .compatible = "ibm,plb4", }, { .compatible = "ibm,opb", }, @@ -55,6 +57,8 @@ define_machine(warp) { }; +static u32 post_info; + /* I am not sure this is the best place for this... */ static int __init warp_post_info(void) { @@ -77,21 +81,21 @@ static int __init warp_post_info(void) iounmap(fpga); - if (post1 || post2) + if (post1 || post2) { printk(KERN_INFO "Warp POST %08x %08x\n", post1, post2); - else + post_info = 1; + } else printk(KERN_INFO "Warp POST OK\n"); return 0; } -machine_late_initcall(warp, warp_post_info); #ifdef CONFIG_SENSORS_AD7414 static LIST_HEAD(dtm_shutdown_list); static void __iomem *dtm_fpga; -static void __iomem *gpio_base; +static unsigned green_led, red_led; struct dtm_shutdown { @@ -134,14 +138,17 @@ int pika_dtm_unregister_shutdown(void (*func)(void *arg), void *arg) static irqreturn_t temp_isr(int irq, void *context) { struct dtm_shutdown *shutdown; + int value = 1; local_irq_disable(); + gpio_set_value(green_led, 0); + /* Run through the shutdown list. */ list_for_each_entry(shutdown, &dtm_shutdown_list, list) shutdown->func(shutdown->arg); - printk(KERN_EMERG "\n\nCritical Temperature Shutdown\n"); + printk(KERN_EMERG "\n\nCritical Temperature Shutdown\n\n"); while (1) { if (dtm_fpga) { @@ -149,52 +156,34 @@ static irqreturn_t temp_isr(int irq, void *context) out_be32(dtm_fpga + 0x14, reset); } - if (gpio_base) { - unsigned leds = in_be32(gpio_base); - - /* green off, red toggle */ - leds &= ~0x80000000; - leds ^= 0x40000000; - - out_be32(gpio_base, leds); - } - + gpio_set_value(red_led, value); + value ^= 1; mdelay(500); } } static int pika_setup_leds(void) { - struct device_node *np; - const u32 *gpios; - int len; + struct device_node *np, *child; - np = of_find_compatible_node(NULL, NULL, "linux,gpio-led"); + np = of_find_compatible_node(NULL, NULL, "gpio-leds"); if (!np) { - printk(KERN_ERR __FILE__ ": Unable to find gpio-led\n"); - return -ENOENT; - } - - gpios = of_get_property(np, "gpios", &len); - of_node_put(np); - if (!gpios || len < 4) { - printk(KERN_ERR __FILE__ - ": Unable to get gpios property (%d)\n", len); + printk(KERN_ERR __FILE__ ": Unable to find leds\n"); return -ENOENT; } - np = of_find_node_by_phandle(gpios[0]); - if (!np) { - printk(KERN_ERR __FILE__ ": Unable to find gpio\n"); - return -ENOENT; - } + for_each_child_of_node(np, child) + if (strcmp(child->name, "green") == 0) { + green_led = of_get_gpio(child, 0); + /* Turn back on the green LED */ + gpio_set_value(green_led, 1); + } else if (strcmp(child->name, "red") == 0) { + red_led = of_get_gpio(child, 0); + /* Set based on post */ + gpio_set_value(red_led, post_info); + } - gpio_base = of_iomap(np, 0); of_node_put(np); - if (!gpio_base) { - printk(KERN_ERR __FILE__ ": Unable to map gpio"); - return -ENOMEM; - } return 0; } @@ -270,10 +259,10 @@ static int pika_dtm_thread(void __iomem *fpga) } found_it: - i2c_put_adapter(adap); - pika_setup_critical_temp(client); + i2c_put_adapter(adap); + printk(KERN_INFO "PIKA DTM thread running.\n"); while (!kthread_should_stop()) { @@ -311,6 +300,9 @@ static int __init pika_dtm_start(void) if (dtm_fpga == NULL) return -ENOENT; + /* Must get post info before thread starts. */ + warp_post_info(); + dtm_thread = kthread_run(pika_dtm_thread, dtm_fpga, "pika-dtm"); if (IS_ERR(dtm_thread)) { iounmap(dtm_fpga); @@ -333,6 +325,8 @@ int pika_dtm_unregister_shutdown(void (*func)(void *arg), void *arg) return 0; } +machine_late_initcall(warp, warp_post_info); + #endif EXPORT_SYMBOL(pika_dtm_register_shutdown); diff --git a/arch/powerpc/platforms/52xx/efika.c b/arch/powerpc/platforms/52xx/efika.c index a2068faef6e..bcc69e1f77c 100644 --- a/arch/powerpc/platforms/52xx/efika.c +++ b/arch/powerpc/platforms/52xx/efika.c @@ -34,7 +34,7 @@ static int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 * val) { - struct pci_controller *hose = bus->sysdata; + struct pci_controller *hose = pci_bus_to_host(bus); unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) | (((bus->number - hose->first_busno) & 0xff) << 16) | (hose->global_number << 24); @@ -49,7 +49,7 @@ static int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset, static int rtas_write_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 val) { - struct pci_controller *hose = bus->sysdata; + struct pci_controller *hose = pci_bus_to_host(bus); unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) | (((bus->number - hose->first_busno) & 0xff) << 16) | (hose->global_number << 24); diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c index 87ff522f28b..dd43114e968 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c @@ -107,7 +107,7 @@ static int mpc52xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 *val) { - struct pci_controller *hose = bus->sysdata; + struct pci_controller *hose = pci_bus_to_host(bus); u32 value; if (ppc_md.pci_exclude_device) @@ -164,7 +164,7 @@ static int mpc52xx_pci_write_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 val) { - struct pci_controller *hose = bus->sysdata; + struct pci_controller *hose = pci_bus_to_host(bus); u32 value, mask; if (ppc_md.pci_exclude_device) diff --git a/arch/powerpc/platforms/82xx/pq2ads.h b/arch/powerpc/platforms/82xx/pq2ads.h index 984db42cc8e..6cf0f97486e 100644 --- a/arch/powerpc/platforms/82xx/pq2ads.h +++ b/arch/powerpc/platforms/82xx/pq2ads.h @@ -24,10 +24,6 @@ #include <linux/seq_file.h> -/* Backword-compatibility stuff for the drivers */ -#define CPM_MAP_ADDR ((uint)0xf0000000) -#define CPM_IRQ_OFFSET 0 - /* The ADS8260 has 16, 32-bit wide control/status registers, accessed * only on word boundaries. * Not all are used (yet), or are interesting to us (yet). @@ -44,14 +40,5 @@ #define BCSR3_FETHIEN2 ((uint)0x10000000) /* 0 == enable*/ #define BCSR3_FETH2_RST ((uint)0x80000000) /* 0 == reset */ -/* cpm serial driver works with constants below */ - -#define SIU_INT_SMC1 ((uint)0x04+CPM_IRQ_OFFSET) -#define SIU_INT_SMC2 ((uint)0x05+CPM_IRQ_OFFSET) -#define SIU_INT_SCC1 ((uint)0x28+CPM_IRQ_OFFSET) -#define SIU_INT_SCC2 ((uint)0x29+CPM_IRQ_OFFSET) -#define SIU_INT_SCC3 ((uint)0x2a+CPM_IRQ_OFFSET) -#define SIU_INT_SCC4 ((uint)0x2b+CPM_IRQ_OFFSET) - #endif /* __MACH_ADS8260_DEFS */ #endif /* __KERNEL__ */ diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 7f066adc068..43d385cedcd 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -34,6 +34,7 @@ config MPC85xx_MDS bool "Freescale MPC85xx MDS" select DEFAULT_UIMAGE select PHYLIB + select HAS_RAPIDIO help This option enables support for the MPC85xx MDS board diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c index de66de7a9ca..53d5851a6c9 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c @@ -163,7 +163,8 @@ static void __init mpc85xx_ds_setup_arch(void) #ifdef CONFIG_PCI for_each_node_by_type(np, "pci") { if (of_device_is_compatible(np, "fsl,mpc8540-pci") || - of_device_is_compatible(np, "fsl,mpc8548-pcie")) { + of_device_is_compatible(np, "fsl,mpc8548-pcie") || + of_device_is_compatible(np, "fsl,p2020-pcie")) { struct resource rsrc; of_address_to_resource(np, 0, &rsrc); if ((rsrc.start & 0xfffff) == primary_phb_addr) @@ -195,9 +196,9 @@ static int __init mpc8544_ds_probe(void) primary_phb_addr = 0xb000; #endif return 1; - } else { - return 0; } + + return 0; } static struct of_device_id __initdata mpc85xxds_ids[] = { @@ -214,6 +215,7 @@ static int __init mpc85xxds_publish_devices(void) } machine_device_initcall(mpc8544_ds, mpc85xxds_publish_devices); machine_device_initcall(mpc8572_ds, mpc85xxds_publish_devices); +machine_device_initcall(p2020_ds, mpc85xxds_publish_devices); /* * Called very early, device-tree isn't unflattened @@ -227,9 +229,26 @@ static int __init mpc8572_ds_probe(void) primary_phb_addr = 0x8000; #endif return 1; - } else { - return 0; } + + return 0; +} + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init p2020_ds_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (of_flat_dt_is_compatible(root, "fsl,P2020DS")) { +#ifdef CONFIG_PCI + primary_phb_addr = 0x9000; +#endif + return 1; + } + + return 0; } define_machine(mpc8544_ds) { @@ -259,3 +278,17 @@ define_machine(mpc8572_ds) { .calibrate_decr = generic_calibrate_decr, .progress = udbg_progress, }; + +define_machine(p2020_ds) { + .name = "P2020 DS", + .probe = p2020_ds_probe, + .setup_arch = mpc85xx_ds_setup_arch, + .init_IRQ = mpc85xx_ds_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index 7dd029034ae..b2c0a431997 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -206,23 +206,24 @@ static void __init mpc85xx_mds_setup_arch(void) } if (bcsr_regs) { + if (machine_is(mpc8568_mds)) { #define BCSR_UCC1_GETH_EN (0x1 << 7) #define BCSR_UCC2_GETH_EN (0x1 << 7) #define BCSR_UCC1_MODE_MSK (0x3 << 4) #define BCSR_UCC2_MODE_MSK (0x3 << 0) - /* Turn off UCC1 & UCC2 */ - clrbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN); - clrbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN); + /* Turn off UCC1 & UCC2 */ + clrbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN); + clrbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN); - /* Mode is RGMII, all bits clear */ - clrbits8(&bcsr_regs[11], BCSR_UCC1_MODE_MSK | - BCSR_UCC2_MODE_MSK); - - /* Turn UCC1 & UCC2 on */ - setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN); - setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN); + /* Mode is RGMII, all bits clear */ + clrbits8(&bcsr_regs[11], BCSR_UCC1_MODE_MSK | + BCSR_UCC2_MODE_MSK); + /* Turn UCC1 & UCC2 on */ + setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN); + setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN); + } iounmap(bcsr_regs); } #endif /* CONFIG_QUICC_ENGINE */ @@ -257,7 +258,8 @@ static int __init board_fixups(void) return 0; } -machine_arch_initcall(mpc85xx_mds, board_fixups); +machine_arch_initcall(mpc8568_mds, board_fixups); +machine_arch_initcall(mpc8569_mds, board_fixups); static struct of_device_id mpc85xx_ids[] = { { .type = "soc", }, @@ -276,7 +278,8 @@ static int __init mpc85xx_publish_devices(void) return 0; } -machine_device_initcall(mpc85xx_mds, mpc85xx_publish_devices); +machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices); +machine_device_initcall(mpc8569_mds, mpc85xx_publish_devices); static void __init mpc85xx_mds_pic_init(void) { @@ -321,8 +324,8 @@ static int __init mpc85xx_mds_probe(void) return of_flat_dt_is_compatible(root, "MPC85xxMDS"); } -define_machine(mpc85xx_mds) { - .name = "MPC85xx MDS", +define_machine(mpc8568_mds) { + .name = "MPC8568 MDS", .probe = mpc85xx_mds_probe, .setup_arch = mpc85xx_mds_setup_arch, .init_IRQ = mpc85xx_mds_pic_init, @@ -334,3 +337,24 @@ define_machine(mpc85xx_mds) { .pcibios_fixup_bus = fsl_pcibios_fixup_bus, #endif }; + +static int __init mpc8569_mds_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,MPC8569EMDS"); +} + +define_machine(mpc8569_mds) { + .name = "MPC8569 MDS", + .probe = mpc8569_mds_probe, + .setup_arch = mpc85xx_mds_setup_arch, + .init_IRQ = mpc85xx_mds_pic_init, + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif +}; diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c index d79104669cd. |