diff options
Diffstat (limited to 'arch/powerpc/platforms')
| -rw-r--r-- | arch/powerpc/platforms/Kconfig | 31 | ||||
| -rw-r--r-- | arch/powerpc/platforms/pasemi/Makefile | 1 | ||||
| -rw-r--r-- | arch/powerpc/platforms/pasemi/cpufreq.c | 330 | ||||
| -rw-r--r-- | arch/powerpc/platforms/powermac/Makefile | 2 | ||||
| -rw-r--r-- | arch/powerpc/platforms/powermac/cpufreq_32.c | 721 | ||||
| -rw-r--r-- | arch/powerpc/platforms/powermac/cpufreq_64.c | 746 |
6 files changed, 0 insertions, 1831 deletions
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index b62aab3e22e..e17cdfc5ba4 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -193,37 +193,6 @@ config PPC_IO_WORKAROUNDS source "drivers/cpufreq/Kconfig" -menu "CPU Frequency drivers" - depends on CPU_FREQ - -config CPU_FREQ_PMAC - bool "Support for Apple PowerBooks" - depends on ADB_PMU && PPC32 - select CPU_FREQ_TABLE - help - This adds support for frequency switching on Apple PowerBooks, - this currently includes some models of iBook & Titanium - PowerBook. - -config CPU_FREQ_PMAC64 - bool "Support for some Apple G5s" - depends on PPC_PMAC && PPC64 - select CPU_FREQ_TABLE - help - This adds support for frequency switching on Apple iMac G5, - and some of the more recent desktop G5 machines as well. - -config PPC_PASEMI_CPUFREQ - bool "Support for PA Semi PWRficient" - depends on PPC_PASEMI - default y - select CPU_FREQ_TABLE - help - This adds the support for frequency switching on PA Semi - PWRficient processors. - -endmenu - menu "CPUIdle driver" source "drivers/cpuidle/Kconfig" diff --git a/arch/powerpc/platforms/pasemi/Makefile b/arch/powerpc/platforms/pasemi/Makefile index ce6d789e074..8e8d4cae5eb 100644 --- a/arch/powerpc/platforms/pasemi/Makefile +++ b/arch/powerpc/platforms/pasemi/Makefile @@ -1,3 +1,2 @@ obj-y += setup.o pci.o time.o idle.o powersave.o iommu.o dma_lib.o misc.o obj-$(CONFIG_PPC_PASEMI_MDIO) += gpio_mdio.o -obj-$(CONFIG_PPC_PASEMI_CPUFREQ) += cpufreq.o diff --git a/arch/powerpc/platforms/pasemi/cpufreq.c b/arch/powerpc/platforms/pasemi/cpufreq.c deleted file mode 100644 index be1e7958909..00000000000 --- a/arch/powerpc/platforms/pasemi/cpufreq.c +++ /dev/null @@ -1,330 +0,0 @@ -/* - * Copyright (C) 2007 PA Semi, Inc - * - * Authors: Egor Martovetsky <egor@pasemi.com> - * Olof Johansson <olof@lixom.net> - * - * Maintained by: Olof Johansson <olof@lixom.net> - * - * Based on arch/powerpc/platforms/cell/cbe_cpufreq.c: - * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#include <linux/cpufreq.h> -#include <linux/timer.h> -#include <linux/module.h> - -#include <asm/hw_irq.h> -#include <asm/io.h> -#include <asm/prom.h> -#include <asm/time.h> -#include <asm/smp.h> - -#define SDCASR_REG 0x0100 -#define SDCASR_REG_STRIDE 0x1000 -#define SDCPWR_CFGA0_REG 0x0100 -#define SDCPWR_PWST0_REG 0x0000 -#define SDCPWR_GIZTIME_REG 0x0440 - -/* SDCPWR_GIZTIME_REG fields */ -#define SDCPWR_GIZTIME_GR 0x80000000 -#define SDCPWR_GIZTIME_LONGLOCK 0x000000ff - -/* Offset of ASR registers from SDC base */ -#define SDCASR_OFFSET 0x120000 - -static void __iomem *sdcpwr_mapbase; -static void __iomem *sdcasr_mapbase; - -static DEFINE_MUTEX(pas_switch_mutex); - -/* Current astate, is used when waking up from power savings on - * one core, in case the other core has switched states during - * the idle time. - */ -static int current_astate; - -/* We support 5(A0-A4) power states excluding turbo(A5-A6) modes */ -static struct cpufreq_frequency_table pas_freqs[] = { - {0, 0}, - {1, 0}, - {2, 0}, - {3, 0}, - {4, 0}, - {0, CPUFREQ_TABLE_END}, -}; - -static struct freq_attr *pas_cpu_freqs_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -/* - * hardware specific functions - */ - -static int get_astate_freq(int astate) -{ - u32 ret; - ret = in_le32(sdcpwr_mapbase + SDCPWR_CFGA0_REG + (astate * 0x10)); - - return ret & 0x3f; -} - -static int get_cur_astate(int cpu) -{ - u32 ret; - - ret = in_le32(sdcpwr_mapbase + SDCPWR_PWST0_REG); - ret = (ret >> (cpu * 4)) & 0x7; - - return ret; -} - -static int get_gizmo_latency(void) -{ - u32 giztime, ret; - - giztime = in_le32(sdcpwr_mapbase + SDCPWR_GIZTIME_REG); - - /* just provide the upper bound */ - if (giztime & SDCPWR_GIZTIME_GR) - ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 128000; - else - ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 1000; - - return ret; -} - -static void set_astate(int cpu, unsigned int astate) -{ - unsigned long flags; - - /* Return if called before init has run */ - if (unlikely(!sdcasr_mapbase)) - return; - - local_irq_save(flags); - - out_le32(sdcasr_mapbase + SDCASR_REG + SDCASR_REG_STRIDE*cpu, astate); - - local_irq_restore(flags); -} - -int check_astate(void) -{ - return get_cur_astate(hard_smp_processor_id()); -} - -void restore_astate(int cpu) -{ - set_astate(cpu, current_astate); -} - -/* - * cpufreq functions - */ - -static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy) -{ - const u32 *max_freqp; - u32 max_freq; - int i, cur_astate; - struct resource res; - struct device_node *cpu, *dn; - int err = -ENODEV; - - cpu = of_get_cpu_node(policy->cpu, NULL); - - if (!cpu) - goto out; - - dn = of_find_compatible_node(NULL, NULL, "1682m-sdc"); - if (!dn) - dn = of_find_compatible_node(NULL, NULL, - "pasemi,pwrficient-sdc"); - if (!dn) - goto out; - err = of_address_to_resource(dn, 0, &res); - of_node_put(dn); - if (err) - goto out; - sdcasr_mapbase = ioremap(res.start + SDCASR_OFFSET, 0x2000); - if (!sdcasr_mapbase) { - err = -EINVAL; - goto out; - } - - dn = of_find_compatible_node(NULL, NULL, "1682m-gizmo"); - if (!dn) - dn = of_find_compatible_node(NULL, NULL, - "pasemi,pwrficient-gizmo"); - if (!dn) { - err = -ENODEV; - goto out_unmap_sdcasr; - } - err = of_address_to_resource(dn, 0, &res); - of_node_put(dn); - if (err) - goto out_unmap_sdcasr; - sdcpwr_mapbase = ioremap(res.start, 0x1000); - if (!sdcpwr_mapbase) { - err = -EINVAL; - goto out_unmap_sdcasr; - } - - pr_debug("init cpufreq on CPU %d\n", policy->cpu); - - max_freqp = of_get_property(cpu, "clock-frequency", NULL); - if (!max_freqp) { - err = -EINVAL; - goto out_unmap_sdcpwr; - } - - /* we need the freq in kHz */ - max_freq = *max_freqp / 1000; - - pr_debug("max clock-frequency is at %u kHz\n", max_freq); - pr_debug("initializing frequency table\n"); - - /* initialize frequency table */ - for (i=0; pas_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) { - pas_freqs[i].frequency = get_astate_freq(pas_freqs[i].index) * 100000; - pr_debug("%d: %d\n", i, pas_freqs[i].frequency); - } - - policy->cpuinfo.transition_latency = get_gizmo_latency(); - - cur_astate = get_cur_astate(policy->cpu); - pr_debug("current astate is at %d\n",cur_astate); - - policy->cur = pas_freqs[cur_astate].frequency; - cpumask_copy(policy->cpus, cpu_online_mask); - - ppc_proc_freq = policy->cur * 1000ul; - - cpufreq_frequency_table_get_attr(pas_freqs, policy->cpu); - - /* this ensures that policy->cpuinfo_min and policy->cpuinfo_max - * are set correctly - */ - return cpufreq_frequency_table_cpuinfo(policy, pas_freqs); - -out_unmap_sdcpwr: - iounmap(sdcpwr_mapbase); - -out_unmap_sdcasr: - iounmap(sdcasr_mapbase); -out: - return err; -} - -static int pas_cpufreq_cpu_exit(struct cpufreq_policy *policy) -{ - /* - * We don't support CPU hotplug. Don't unmap after the system - * has already made it to a running state. - */ - if (system_state != SYSTEM_BOOTING) - return 0; - - if (sdcasr_mapbase) - iounmap(sdcasr_mapbase); - if (sdcpwr_mapbase) - iounmap(sdcpwr_mapbase); - - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static int pas_cpufreq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, pas_freqs); -} - -static int pas_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - struct cpufreq_freqs freqs; - int pas_astate_new; - int i; - - cpufreq_frequency_table_target(policy, - pas_freqs, - target_freq, - relation, - &pas_astate_new); - - freqs.old = policy->cur; - freqs.new = pas_freqs[pas_astate_new].frequency; - - mutex_lock(&pas_switch_mutex); - cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); - - pr_debug("setting frequency for cpu %d to %d kHz, 1/%d of max frequency\n", - policy->cpu, - pas_freqs[pas_astate_new].frequency, - pas_freqs[pas_astate_new].index); - - current_astate = pas_astate_new; - - for_each_online_cpu(i) - set_astate(i, pas_astate_new); - - cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); - mutex_unlock(&pas_switch_mutex); - - ppc_proc_freq = freqs.new * 1000ul; - return 0; -} - -static struct cpufreq_driver pas_cpufreq_driver = { - .name = "pas-cpufreq", - .owner = THIS_MODULE, - .flags = CPUFREQ_CONST_LOOPS, - .init = pas_cpufreq_cpu_init, - .exit = pas_cpufreq_cpu_exit, - .verify = pas_cpufreq_verify, - .target = pas_cpufreq_target, - .attr = pas_cpu_freqs_attr, -}; - -/* - * module init and destoy - */ - -static int __init pas_cpufreq_init(void) -{ - if (!of_machine_is_compatible("PA6T-1682M") && - !of_machine_is_compatible("pasemi,pwrficient")) - return -ENODEV; - - return cpufreq_register_driver(&pas_cpufreq_driver); -} - -static void __exit pas_cpufreq_exit(void) -{ - cpufreq_unregister_driver(&pas_cpufreq_driver); -} - -module_init(pas_cpufreq_init); -module_exit(pas_cpufreq_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Egor Martovetsky <egor@pasemi.com>, Olof Johansson <olof@lixom.net>"); diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile index ea47df66fee..52c6ce1cc98 100644 --- a/arch/powerpc/platforms/powermac/Makefile +++ b/arch/powerpc/platforms/powermac/Makefile @@ -9,8 +9,6 @@ obj-y += pic.o setup.o time.o feature.o pci.o \ sleep.o low_i2c.o cache.o pfunc_core.o \ pfunc_base.o udbg_scc.o udbg_adb.o obj-$(CONFIG_PMAC_BACKLIGHT) += backlight.o -obj-$(CONFIG_CPU_FREQ_PMAC) += cpufreq_32.o -obj-$(CONFIG_CPU_FREQ_PMAC64) += cpufreq_64.o # CONFIG_NVRAM is an arch. independent tristate symbol, for pmac32 we really # need this to be a bool. Cheat here and pretend CONFIG_NVRAM=m is really # CONFIG_NVRAM=y diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c deleted file mode 100644 index 3104fad8248..00000000000 --- a/arch/powerpc/platforms/powermac/cpufreq_32.c +++ /dev/null @@ -1,721 +0,0 @@ -/* - * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org> - * Copyright (C) 2004 John Steele Scott <toojays@toojays.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * TODO: Need a big cleanup here. Basically, we need to have different - * cpufreq_driver structures for the different type of HW instead of the - * current mess. We also need to better deal with the detection of the - * type of machine. - * - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/sched.h> -#include <linux/adb.h> -#include <linux/pmu.h> -#include <linux/cpufreq.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/hardirq.h> -#include <asm/prom.h> -#include <asm/machdep.h> -#include <asm/irq.h> -#include <asm/pmac_feature.h> -#include <asm/mmu_context.h> -#include <asm/sections.h> -#include <asm/cputable.h> -#include <asm/time.h> -#include <asm/mpic.h> -#include <asm/keylargo.h> -#include <asm/switch_to.h> - -/* WARNING !!! This will cause calibrate_delay() to be called, - * but this is an __init function ! So you MUST go edit - * init/main.c to make it non-init before enabling DEBUG_FREQ - */ -#undef DEBUG_FREQ - -extern void low_choose_7447a_dfs(int dfs); -extern void low_choose_750fx_pll(int pll); -extern void low_sleep_handler(void); - -/* - * Currently, PowerMac cpufreq supports only high & low frequencies - * that are set by the firmware - */ -static unsigned int low_freq; -static unsigned int hi_freq; -static unsigned int cur_freq; -static unsigned int sleep_freq; -static unsigned long transition_latency; - -/* - * Different models uses different mechanisms to switch the frequency - */ -static int (*set_speed_proc)(int low_speed); -static unsigned int (*get_speed_proc)(void); - -/* - * Some definitions used by the various speedprocs - */ -static u32 voltage_gpio; -static u32 frequency_gpio; -static u32 slew_done_gpio; -static int no_schedule; -static int has_cpu_l2lve; -static int is_pmu_based; - -/* There are only two frequency states for each processor. Values - * are in kHz for the time being. - */ -#define CPUFREQ_HIGH 0 -#define CPUFREQ_LOW 1 - -static struct cpufreq_frequency_table pmac_cpu_freqs[] = { - {CPUFREQ_HIGH, 0}, - {CPUFREQ_LOW, 0}, - {0, CPUFREQ_TABLE_END}, -}; - -static struct freq_attr* pmac_cpu_freqs_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static inline void local_delay(unsigned long ms) -{ - if (no_schedule) - mdelay(ms); - else - msleep(ms); -} - -#ifdef DEBUG_FREQ -static inline void debug_calc_bogomips(void) -{ - /* This will cause a recalc of bogomips and display the - * result. We backup/restore the value to avoid affecting the - * core cpufreq framework's own calculation. - */ - unsigned long save_lpj = loops_per_jiffy; - calibrate_delay(); - loops_per_jiffy = save_lpj; -} -#endif /* DEBUG_FREQ */ - -/* Switch CPU speed under 750FX CPU control - */ -static int cpu_750fx_cpu_speed(int low_speed) -{ - u32 hid2; - - if (low_speed == 0) { - /* ramping up, set voltage first */ - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); - /* Make sure we sleep for at least 1ms */ - local_delay(10); - - /* tweak L2 for high voltage */ - if (has_cpu_l2lve) { - hid2 = mfspr(SPRN_HID2); - hid2 &= ~0x2000; - mtspr(SPRN_HID2, hid2); - } - } -#ifdef CONFIG_6xx - low_choose_750fx_pll(low_speed); -#endif - if (low_speed == 1) { - /* tweak L2 for low voltage */ - if (has_cpu_l2lve) { - hid2 = mfspr(SPRN_HID2); - hid2 |= 0x2000; - mtspr(SPRN_HID2, hid2); - } - - /* ramping down, set voltage last */ - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); - local_delay(10); - } - - return 0; -} - -static unsigned int cpu_750fx_get_cpu_speed(void) -{ - if (mfspr(SPRN_HID1) & HID1_PS) - return low_freq; - else - return hi_freq; -} - -/* Switch CPU speed using DFS */ -static int dfs_set_cpu_speed(int low_speed) -{ - if (low_speed == 0) { - /* ramping up, set voltage first */ - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); - /* Make sure we sleep for at least 1ms */ - local_delay(1); - } - - /* set frequency */ -#ifdef CONFIG_6xx - low_choose_7447a_dfs(low_speed); -#endif - udelay(100); - - if (low_speed == 1) { - /* ramping down, set voltage last */ - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); - local_delay(1); - } - - return 0; -} - -static unsigned int dfs_get_cpu_speed(void) -{ - if (mfspr(SPRN_HID1) & HID1_DFS) - return low_freq; - else - return hi_freq; -} - - -/* Switch CPU speed using slewing GPIOs - */ -static int gpios_set_cpu_speed(int low_speed) -{ - int gpio, timeout = 0; - - /* If ramping up, set voltage first */ - if (low_speed == 0) { - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); - /* Delay is way too big but it's ok, we schedule */ - local_delay(10); - } - - /* Set frequency */ - gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); - if (low_speed == ((gpio & 0x01) == 0)) - goto skip; - - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, frequency_gpio, - low_speed ? 0x04 : 0x05); - udelay(200); - do { - if (++timeout > 100) - break; - local_delay(1); - gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, slew_done_gpio, 0); - } while((gpio & 0x02) == 0); - skip: - /* If ramping down, set voltage last */ - if (low_speed == 1) { - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); - /* Delay is way too big but it's ok, we schedule */ - local_delay(10); - } - -#ifdef DEBUG_FREQ - debug_calc_bogomips(); -#endif - - return 0; -} - -/* Switch CPU speed under PMU control - */ -static int pmu_set_cpu_speed(int low_speed) -{ - struct adb_request req; - unsigned long save_l2cr; - unsigned long save_l3cr; - unsigned int pic_prio; - unsigned long flags; - - preempt_disable(); - -#ifdef DEBUG_FREQ - printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1)); -#endif - pmu_suspend(); - - /* Disable all interrupt sources on openpic */ - pic_prio = mpic_cpu_get_priority(); - mpic_cpu_set_priority(0xf); - - /* Make sure the decrementer won't interrupt us */ - asm volatile("mtdec %0" : : "r" (0x7fffffff)); - /* Make sure any pending DEC interrupt occurring while we did - * the above didn't re-enable the DEC */ - mb(); - asm volatile("mtdec %0" : : "r" (0x7fffffff)); - - /* We can now disable MSR_EE */ - local_irq_save(flags); - - /* Giveup the FPU & vec */ - enable_kernel_fp(); - -#ifdef CONFIG_ALTIVEC - if (cpu_has_feature(CPU_FTR_ALTIVEC)) - enable_kernel_altivec(); -#endif /* CONFIG_ALTIVEC */ - - /* Save & disable L2 and L3 caches */ - save_l3cr = _get_L3CR(); /* (returns -1 if not available) */ - save_l2cr = _get_L2CR(); /* (returns -1 if not available) */ - - /* Send the new speed command. My assumption is that this command - * will cause PLL_CFG[0..3] to be changed next time CPU goes to sleep - */ - pmu_request(&req, NULL, 6, PMU_CPU_SPEED, 'W', 'O', 'O', 'F', low_speed); - while (!req.complete) - pmu_poll(); - - /* Prepare the northbridge for the speed transition */ - pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,1); - - /* Call low level code to backup CPU state and recover from - * hardware reset - */ - low_sleep_handler(); - - /* Restore the northbridge */ - pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,0); - - /* Restore L2 cache */ - if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0) - _set_L2CR(save_l2cr); - /* Restore L3 cache */ - if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0) - _set_L3CR(save_l3cr); - - /* Restore userland MMU context */ - switch_mmu_context(NULL, current->active_mm); - -#ifdef DEBUG_FREQ - printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1)); -#endif - - /* Restore low level PMU operations */ - pmu_unlock(); - - /* - * Restore decrementer; we'll take a decrementer interrupt - * as soon as interrupts are re-enabled and the generic - * clockevents code will reprogram it with the right value. - */ - set_dec(1); - - /* Restore interrupts */ - mpic_cpu_set_priority(pic_prio); - - /* Let interrupts flow again ... */ - local_irq_restore(flags); - -#ifdef DEBUG_FREQ - debug_calc_bogomips(); -#endif - - pmu_resume(); - - preempt_enable(); - - return 0; -} - -static int do_set_cpu_speed(struct cpufreq_policy *policy, int speed_mode, - int notify) -{ - struct cpufreq_freqs freqs; - unsigned long l3cr; - static unsigned long prev_l3cr; - - freqs.old = cur_freq; - freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; - - if (freqs.old == freqs.new) - return 0; - - if (notify) - cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); - if (speed_mode == CPUFREQ_LOW && - cpu_has_feature(CPU_FTR_L3CR)) { - l3cr = _get_L3CR(); - if (l3cr & L3CR_L3E) { - prev_l3cr = l3cr; - _set_L3CR(0); - } - } - set_speed_proc(speed_mode == CPUFREQ_LOW); - if (speed_mode == CPUFREQ_HIGH && - cpu_has_feature(CPU_FTR_L3CR)) { - l3cr = _get_L3CR(); - if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr) - _set_L3CR(prev_l3cr); - } - if (notify) - cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); - cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; - - return 0; -} - -static unsigned int pmac_cpufreq_get_speed(unsigned int cpu) -{ - return cur_freq; -} - -static int pmac_cpufreq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, pmac_cpu_freqs); -} - -static int pmac_cpufreq_target( struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0; - int rc; - - if (cpufreq_frequency_table_target(policy, pmac_cpu_freqs, - target_freq, relation, &newstate)) - return -EINVAL; - - rc = do_set_cpu_speed(policy, newstate, 1); - - ppc_proc_freq = cur_freq * 1000ul; - return rc; -} - -static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -ENODEV; - - policy->cpuinfo.transition_latency = transition_latency; - policy->cur = cur_freq; - - cpufreq_frequency_table_get_attr(pmac_cpu_freqs, policy->cpu); - return cpufreq_frequency_table_cpuinfo(policy, pmac_cpu_freqs); -} - -static u32 read_gpio(struct device_node *np) -{ - const u32 *reg = of_get_property(np, "reg", NULL); - u32 offset; - - if (reg == NULL) - return 0; - /* That works for all keylargos but shall be fixed properly - * some day... The problem is that it seems we can't rely - * on the "reg" property of the GPIO nodes, they are either - * relative to the base of KeyLargo or to the base of the - * GPIO space, and the device-tree doesn't help. - */ - offset = *reg; - if (offset < KEYLARGO_GPIO_LEVELS0) - offset += KEYLARGO_GPIO_LEVELS0; - return offset; -} - -static int pmac_cpufreq_suspend(struct cpufreq_policy *policy) -{ - /* Ok, this could be made a bit smarter, but let's be robust for now. We - * always force a speed change to high speed before sleep, to make sure - * we have appropriate voltage and/or bus speed for the wakeup process, - * and to make sure our loops_per_jiffies are "good enough", that is will - * not cause too short delays if we sleep in low speed and wake in high - * speed.. - */ - no_schedule = 1; - sleep_freq = cur_freq; - if (cur_freq == low_freq && !is_pmu_based) - do_set_cpu_speed(policy, CPUFREQ_HIGH, 0); - return 0; -} - -static int pmac_cpufreq_resume(struct cpufreq_policy *policy) -{ - /* If we resume, first check if we have a get() function */ - if (get_speed_proc) - cur_freq = get_speed_proc(); - else - cur_freq = 0; - - /* We don't, hrm... we don't really know our speed here, best - * is that we force a switch to whatever it was, which is - * probably high speed due to our suspend() routine - */ - do_set_cpu_speed(policy, sleep_freq == low_freq ? - CPUFREQ_LOW : CPUFREQ_HIGH, 0); - - ppc_proc_freq = cur_freq * 1000ul; - - no_schedule = 0; - return 0; -} - -static struct cpufreq_driver pmac_cpufreq_driver = { - .verify = pmac_cpufreq_verify, - .target = pmac_cpufreq_target, - .get = pmac_cpufreq_get_speed, - .init = pmac_cpufreq_cpu_init, - .suspend = pmac_cpufreq_suspend, - .resume = pmac_cpufreq_resume, - .flags = CPUFREQ_PM_NO_WARN, - .attr = pmac_cpu_freqs_attr, - .name = "powermac", - .owner = THIS_MODULE, -}; - - -static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode) -{ - struct device_node *volt_gpio_np = of_find_node_by_name(NULL, - "voltage-gpio"); - struct device_node *freq_gpio_np = of_find_node_by_name(NULL, - "frequency-gpio"); - struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL, - "slewing-done"); - const u32 *value; - - /* - * Check to see if it's GPIO driven or PMU only - * - * The way we extract the GPIO address is slightly hackish, but it - * works well enough for now. We need to abstract the whole GPIO - * stuff sooner or later anyway - */ - - if (volt_gpio_np) - voltage_gpio = read_gpio(volt_gpio_np); - if (freq_gpio_np) - frequency_gpio = read_gpio(freq_gpio_np); - if (slew_done_gpio_np) - slew_done_gpio = read_gpio(slew_done_gpio_np); - - /* If we use the frequency GPIOs, calculate the min/max speeds based - * on the bus frequencies - */ - if (frequency_gpio && slew_done_gpio) { - int lenp, rc; - const u32 *freqs, *ratio; - - freqs = of_get_property(cpunode, "bus-frequencies", &lenp); - lenp /= sizeof(u32); - if (freqs == NULL || lenp != 2) { - printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n"); - return 1; - } - ratio = of_get_property(cpunode, "processor-to-bus-ratio*2", - NULL); - if (ratio == NULL) { - printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n"); - return 1; - } - - /* Get the min/max bus frequencies */ - low_freq = min(freqs[0], freqs[1]); - hi_freq = max(freqs[0], freqs[1]); - - /* Grrrr.. It _seems_ that the device-tree is lying on the low bus - * frequency, it claims it to be around 84Mhz on some models while - * it appears to be approx. 101Mhz on all. Let's hack around here... - * fortunately, we don't need to be too precise - */ - if (low_freq < 98000000) - low_freq = 101000000; - - /* Convert those to CPU core clocks */ - low_freq = (low_freq * (*ratio)) / 2000; - hi_freq = (hi_freq * (*ratio)) / 2000; - - /* Now we get the frequencies, we read the GPIO to see what is out current - * speed - */ - rc = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); - cur_freq = (rc & 0x01) ? hi_freq : low_freq; - - set_speed_proc = gpios_set_cpu_speed; - return 1; - } - - /* If we use the PMU, look for the min & max frequencies in the - * device-tree - */ - value = of_get_property(cpunode, "min-clock-frequency", NULL); - if (!value) - return 1; - low_freq = (*value) / 1000; - /* The PowerBook G4 12" (PowerBook6,1) has an error in the device-tree - * here */ - if (low_freq < 100000) - low_freq *= 10; - - value = of_get_property(cpunode, "max-clock-frequency", NULL); - if (!value) - return 1; - hi_freq = (*value) / 1000; - set_speed_proc = pmu_set_cpu_speed; - is_pmu_based = 1; - - return 0; -} - -static int pmac_cpufreq_init_7447A(struct device_node *cpunode) -{ - struct device_node *volt_gpio_np; - - if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL) - return 1; - - volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); - if (volt_gpio_np) - voltage_gpio = read_gpio(volt_gpio_np); - if (!voltage_gpio){ - printk(KERN_ERR "cpufreq: missing cpu-vcore-select gpio\n"); - return 1; - } - - /* OF only reports the high frequency */ - hi_freq = cur_freq; - low_freq = cur_freq/2; - - /* Read actual frequency from CPU */ - cur_freq = dfs_get_cpu_speed(); - set_speed_proc = dfs_set_cpu_speed; - get_speed_proc = dfs_get_cpu_speed; - - return 0; -} - -static int pmac_cpufreq_init_750FX(struct device_node *cpunode) -{ - struct device_node *volt_gpio_np; - u32 pvr; - const u32 *value; - - if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL) - return 1; - - hi_freq = cur_freq; - value = of_get_property(cpunode, "reduced-clock-frequency", NULL); - if (!value) - return 1; - low_freq = (*value) / 1000; - - volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); - if (volt_gpio_np) - voltage_gpio = read_gpio(volt_gpio_np); - - pvr = mfspr(SPRN_PVR); - has_cpu_l2lve = !((pvr & 0xf00) == 0x100); - - set_speed_proc = cpu_750fx_cpu_speed; - get_speed_proc = cpu_750fx_get_cpu_speed; - cur_freq = cpu_750fx_get_cpu_speed(); - - return 0; -} - -/* Currently, we support the following machines: - * - * - Titanium PowerBook 1Ghz (PMU based, 667Mhz & 1Ghz) - * - Titanium PowerBook 800 (PMU based, 667Mhz & 800Mhz) - * - Titanium PowerBook 400 (PMU based, 300Mhz & 400Mhz) - * - Titanium PowerBook 500 (PMU based, 300Mhz & 500Mhz) - * - iBook2 500/600 (PMU based, 400Mhz & 500/600Mhz) - * - iBook2 700 (CPU based, 400Mhz & 700Mhz, support low voltage) - * - Recent MacRISC3 laptops - * - All new machines with 7447A CPUs - */ -static int __init pmac_cpufreq_setup(void) -{ - struct device_node *cpunode; - const u32 *value; - - if (strstr(cmd_line, "nocpufreq")) - return 0; - - /* Assume only one CPU */ - cpunode = of_find_node_by_type(NULL, "cpu"); - if (!cpunode) - goto out; - - /* Get current cpu clock freq */ - value = of_get_property(cpunode, "clock-frequency", NULL); - if (!value) - goto out; - cur_freq = (*value) / 1000; - transition_latency = CPUFREQ_ETERNAL; - - /* Check for 7447A based MacRISC3 */ - if (of_machine_is_compatible("MacRISC3") && - of_get_property(cpunode, "dynamic-power-step", NULL) && - PVR_VER(mfspr(SPRN_PVR)) == 0x8003) { - pmac_cpufreq_init_7447A(cpunode); - transition_latency = 8000000; - /* Check for other MacRISC3 machines */ - } else if (of_machine_is_compatible("PowerBook3,4") || - of_machine_is_compatible("PowerBook3,5") || - of_machine_is_compatible("MacRISC3")) { - pmac_cpufreq_init_MacRISC3(cpunode); - /* Else check for iBook2 500/600 */ - } else if (of_machine_is_compatible("PowerBook4,1")) { - hi_freq = cur_freq; - low_freq = 400000; - set_speed_proc = pmu_set_cpu_speed; - is_pmu_based = 1; - } - /* Else check for TiPb 550 */ - else if (of_machine_is_compatible("PowerBook3,3") && cur_freq == 550000) { - hi_freq = cur_freq; - low_freq = 500000; - set_speed_proc = pmu_set_cpu_speed; - is_pmu_based = 1; - } - /* Else check for TiPb 400 & 500 */ - else if (of_machine_is_compatible("PowerBook3,2")) { - /* We only know about the 400 MHz and the 500Mhz model - * they both have 300 MHz as low frequency - */ - if (cur_freq < 350000 || cur_freq > 550000) - goto out; - hi_freq = cur_freq; - low_freq = 300000; - set_speed_proc = pmu_set_cpu_speed; - is_pmu_based = 1; - } - /* Else check for 750FX */ - else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000) - pmac_cpufreq_init_750FX(cpunode); -out: - of_node_put(cpunode); - if (set_speed_proc == NULL) - return -ENODEV; - - pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq; - pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq; - ppc_proc_freq = cur_freq * 1000ul; - - printk(KERN_INFO "Registering PowerMac CPU frequency driver\n"); - printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n", - low_freq/1000, hi_freq/1000, cur_freq/1000); - - return cpufreq_register_driver(&pmac_cpufreq_driver); -} - -module_init(pmac_cpufreq_setup); - diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c deleted file mode 100644 index 7ba423431cf..00000000000 --- a/arch/powerpc/platforms/powermac/cpufreq_64.c +++ /dev/null @@ -1,746 +0,0 @@ -/* - * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org> - * and Markus Demleitner <msdemlei@cl.uni-heidelberg.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs, - * that is iMac G5 and latest single CPU desktop. - */ - -#undef DEBUG - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/sched.h> -#include <linux/cpufreq.h> -#include <linux/init.h> -#include <linux/completion.h> |