1 files changed, 678 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
new file mode 100644
index 00000000000..0037a8c8c81
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -0,0 +1,678 @@
+/*
+ *  Support for the interrupt controllers found on Power Macintosh,
+ *  currently Apple's "Grand Central" interrupt controller in all
+ *  it's incarnations. OpenPIC support used on newer machines is
+ *  in a separate file
+ *
+ *  Copyright (C) 1997 Paul Mackerras (paulus@samba.org)
+ *
+ *  Maintained by Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/sysdev.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <linux/module.h>
+
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/time.h>
+#include <asm/pmac_feature.h>
+#include <asm/mpic.h>
+
+#include "pmac.h"
+
+/*
+ * XXX this should be in xmon.h, but putting it there means xmon.h
+ * has to include <linux/interrupt.h> (to get irqreturn_t), which
+ * causes all sorts of problems.  -- paulus
+ */
+extern irqreturn_t xmon_irq(int, void *, struct pt_regs *);
+
+#ifdef CONFIG_PPC32
+struct pmac_irq_hw {
+        unsigned int    event;
+        unsigned int    enable;
+        unsigned int    ack;
+        unsigned int    level;
+};
+
+/* Default addresses */
+static volatile struct pmac_irq_hw *pmac_irq_hw[4] = {
+        (struct pmac_irq_hw *) 0xf3000020,
+        (struct pmac_irq_hw *) 0xf3000010,
+        (struct pmac_irq_hw *) 0xf4000020,
+        (struct pmac_irq_hw *) 0xf4000010,
+};
+
+#define GC_LEVEL_MASK		0x3ff00000
+#define OHARE_LEVEL_MASK	0x1ff00000
+#define HEATHROW_LEVEL_MASK	0x1ff00000
+
+static int max_irqs;
+static int max_real_irqs;
+static u32 level_mask[4];
+
+static DEFINE_SPINLOCK(pmac_pic_lock);
+
+#define GATWICK_IRQ_POOL_SIZE        10
+static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE];
+
+/*
+ * Mark an irq as "lost".  This is only used on the pmac
+ * since it can lose interrupts (see pmac_set_irq_mask).
+ * -- Cort
+ */
+void
+__set_lost(unsigned long irq_nr, int nokick)
+{
+	if (!test_and_set_bit(irq_nr, ppc_lost_interrupts)) {
+		atomic_inc(&ppc_n_lost_interrupts);
+		if (!nokick)
+			set_dec(1);
+	}
+}
+
+static void
+pmac_mask_and_ack_irq(unsigned int irq_nr)
+{
+        unsigned long bit = 1UL << (irq_nr & 0x1f);
+        int i = irq_nr >> 5;
+        unsigned long flags;
+
+        if ((unsigned)irq_nr >= max_irqs)
+                return;
+
+        clear_bit(irq_nr, ppc_cached_irq_mask);
+        if (test_and_clear_bit(irq_nr, ppc_lost_interrupts))
+                atomic_dec(&ppc_n_lost_interrupts);
+	spin_lock_irqsave(&pmac_pic_lock, flags);
+        out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]);
+        out_le32(&pmac_irq_hw[i]->ack, bit);
+        do {
+                /* make sure ack gets to controller before we enable
+                   interrupts */
+                mb();
+        } while((in_le32(&pmac_irq_hw[i]->enable) & bit)
+                != (ppc_cached_irq_mask[i] & bit));
+	spin_unlock_irqrestore(&pmac_pic_lock, flags);
+}
+
+static void pmac_set_irq_mask(unsigned int irq_nr, int nokicklost)
+{
+        unsigned long bit = 1UL << (irq_nr & 0x1f);
+        int i = irq_nr >> 5;
+        unsigned long flags;
+
+        if ((unsigned)irq_nr >= max_irqs)
+                return;
+
+	spin_lock_irqsave(&pmac_pic_lock, flags);
+        /* enable unmasked interrupts */
+        out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]);
+
+        do {
+                /* make sure mask gets to controller before we
+                   return to user */
+                mb();
+        } while((in_le32(&pmac_irq_hw[i]->enable) & bit)
+                != (ppc_cached_irq_mask[i] & bit));
+
+        /*
+         * Unfortunately, setting the bit in the enable register
+         * when the device interrupt is already on *doesn't* set
+         * the bit in the flag register or request another interrupt.
+         */
+        if (bit & ppc_cached_irq_mask[i] & in_le32(&pmac_irq_hw[i]->level))
+		__set_lost((ulong)irq_nr, nokicklost);
+	spin_unlock_irqrestore(&pmac_pic_lock, flags);
+}
+
+/* When an irq gets requested for the first client, if it's an
+ * edge interrupt, we clear any previous one on the controller
+ */
+static unsigned int pmac_startup_irq(unsigned int irq_nr)
+{
+        unsigned long bit = 1UL << (irq_nr & 0x1f);
+        int i = irq_nr >> 5;
+
+	if ((irq_desc[irq_nr].status & IRQ_LEVEL) == 0)
+		out_le32(&pmac_irq_hw[i]->ack, bit);
+        set_bit(irq_nr, ppc_cached_irq_mask);
+        pmac_set_irq_mask(irq_nr, 0);
+
+	return 0;
+}
+
+static void pmac_mask_irq(unsigned int irq_nr)
+{
+        clear_bit(irq_nr, ppc_cached_irq_mask);
+        pmac_set_irq_mask(irq_nr, 0);
+        mb();
+}
+
+static void pmac_unmask_irq(unsigned int irq_nr)
+{
+        set_bit(irq_nr, ppc_cached_irq_mask);
+        pmac_set_irq_mask(irq_nr, 0);
+}
+
+static void pmac_end_irq(unsigned int irq_nr)
+{
+	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
+	    && irq_desc[irq_nr].action) {
+        	set_bit(irq_nr, ppc_cached_irq_mask);
+	        pmac_set_irq_mask(irq_nr, 1);
+	}
+}
+
+
+struct hw_interrupt_type pmac_pic = {
+	.typename	= " PMAC-PIC ",
+	.startup	= pmac_startup_irq,
+	.enable		= pmac_unmask_irq,
+	.disable	= pmac_mask_irq,
+	.ack		= pmac_mask_and_ack_irq,
+	.end		= pmac_end_irq,
+};
+
+struct hw_interrupt_type gatwick_pic = {
+	.typename	= " GATWICK  ",
+	.startup	= pmac_startup_irq,
+	.enable		= pmac_unmask_irq,
+	.disable	= pmac_mask_irq,
+	.ack		= pmac_mask_and_ack_irq,
+	.end		= pmac_end_irq,
+};
+
+static irqreturn_t gatwick_action(int cpl, void *dev_id, struct pt_regs *regs)
+{
+	int irq, bits;
+
+	for (irq = max_irqs; (irq -= 32) >= max_real_irqs; ) {
+		int i = irq >> 5;
+		bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
+		/* We must read level interrupts from the level register */
+		bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]);
+		bits &= ppc_cached_irq_mask[i];
+		if (bits == 0)
+			continue;
+		irq += __ilog2(bits);
+		__do_IRQ(irq, regs);
+		return IRQ_HANDLED;
+	}
+	printk("gatwick irq not from gatwick pic\n");
+	return IRQ_NONE;
+}
+
+int
+pmac_get_irq(struct pt_regs *regs)
+{
+	int irq;
+	unsigned long bits = 0;
+
+#ifdef CONFIG_SMP
+	void psurge_smp_message_recv(struct pt_regs *);
+
+       	/* IPI's are a hack on the powersurge -- Cort */
+       	if ( smp_processor_id() != 0 ) {
+		psurge_smp_message_recv(regs);
+		return -2;	/* ignore, already handled */
+        }
+#endif /* CONFIG_SMP */
+	for (irq = max_real_irqs; (irq -= 32) >= 0; ) {
+		int i = irq >> 5;
+		bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
+		/* We must read level interrupts from the level register */
+		bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]);
+		bits &= ppc_cached_irq_mask[i];
+		if (bits == 0)
+			continue;
+		irq += __ilog2(bits);
+		break;
+	}
+
+	return irq;
+}
+
+/* This routine will fix some missing interrupt values in the device tree
+ * on the gatwick mac-io controller used by some PowerBooks
+ */
+static void __init
+pmac_fix_gatwick_interrupts(struct device_node *gw, int irq_base)
+{
+	struct device_node *node;
+	int count;
+
+	memset(gatwick_int_pool, 0, sizeof(gatwick_int_pool));
+	node = gw->child;
+	count = 0;
+	while(node)
+	{
+		/* Fix SCC */
+		if (strcasecmp(node->name, "escc") == 0)
+			if (node->child) {
+				if (node->child->n_intrs < 3) {
+					node->child->intrs = &gatwick_int_pool[count];
+					count += 3;
+				}
+				node->child->n_intrs = 3;
+				node->child->intrs[0].line = 15+irq_base;
+				node->child->intrs[1].line =  4+irq_base;
+				node->child->intrs[2].line =  5+irq_base;
+				printk(KERN_INFO "irq: fixed SCC on second controller (%d,%d,%d)\n",
+					node->child->intrs[0].line,
+					node->child->intrs[1].line,
+					node->child->intrs[2].line);
+			}
+		/* Fix media-bay & left SWIM */
+		if (strcasecmp(node->name, "media-bay") == 0) {
+			struct device_node* ya_node;
+
+			if (node->n_intrs == 0)
+				node->intrs = &gatwick_int_pool[count++];
+			node->n_intrs = 1;
+			node->intrs[0].line = 29+irq_base;
+			printk(KERN_INFO "irq: fixed media-bay on second controller (%d)\n",
+					node->intrs[0].line);
+
+			ya_node = node->child;
+			while(ya_node)
+			{
+				if (strcasecmp(ya_node->name, "floppy") == 0) {
+					if (ya_node->n_intrs < 2) {
+						ya_node->intrs = &gatwick_int_pool[count];
+						count += 2;
+					}
+					ya_node->n_intrs = 2;
+					ya_node->intrs[0].line = 19+irq_base;
+					ya_node->intrs[1].line =  1+irq_base;
+					printk(KERN_INFO "irq: fixed floppy on second controller (%d,%d)\n",
+						ya_node->intrs[0].line, ya_node->intrs[1].line);
+				}
+				if (strcasecmp(ya_node->name, "ata4") == 0) {
+					if (ya_node->n_intrs < 2) {
+						ya_node->intrs = &gatwick_int_pool[count];
+						count += 2;
+					}
+					ya_node->n_intrs = 2;
+					ya_node->intrs[0].line = 14+irq_base;
+					ya_node->intrs[1].line =  3+irq_base;
+					printk(KERN_INFO "irq: fixed ide on second controller (%d,%d)\n",
+						ya_node->intrs[0].line, ya_node->intrs[1].line);
+				}
+				ya_node = ya_node->sibling;
+			}
+		}
+		node = node->sibling;
+	}
+	if (count > 10) {
+		printk("WARNING !! Gatwick interrupt pool overflow\n");
+		printk("  GATWICK_IRQ_POOL_SIZE = %d\n", GATWICK_IRQ_POOL_SIZE);
+		printk("              requested = %d\n", count);
+	}
+}
+
+/*
+ * The PowerBook 3400/2400/3500 can have a combo ethernet/modem
+ * card which includes an ohare chip that acts as a second interrupt
+ * controller.  If we find this second ohare, set it up and fix the
+ * interrupt value in the device tree for the ethernet chip.
+ */
+static int __init enable_second_ohare(void)
+{
+	unsigned char bus, devfn;
+	unsigned short cmd;
+        unsigned long addr;
+	struct device_node *irqctrler = find_devices("pci106b,7");
+	struct device_node *ether;
+
+	if (irqctrler == NULL || irqctrler->n_addrs <= 0)
+		return -1;
+	addr = (unsigned long) ioremap(irqctrler->addrs[0].address, 0x40);
+	pmac_irq_hw[1] = (volatile struct pmac_irq_hw *)(addr + 0x20);
+	max_irqs = 64;
+	if (pci_device_from_OF_node(irqctrler, &bus, &devfn) == 0) {
+		struct pci_controller* hose = pci_find_hose_for_OF_device(irqctrler);
+		if (!hose)
+		    printk(KERN_ERR "Can't find PCI hose for OHare2 !\n");
+		else {
+		    early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd);
+		    cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+	  	    cmd &= ~PCI_COMMAND_IO;
+		    early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd);
+		}
+	}
+
+	/* Fix interrupt for the modem/ethernet combo controller. The number
+	   in the device tree (27) is bogus (correct for the ethernet-only
+	   board but not the combo ethernet/modem board).
+	   The real interrupt is 28 on the second controller -> 28+32 = 60.
+	*/
+	ether = find_devices("pci1011,14");
+	if (ether && ether->n_intrs > 0) {
+		ether->intrs[0].line = 60;
+		printk(KERN_INFO "irq: Fixed ethernet IRQ to %d\n",
+		       ether->intrs[0].line);
+	}
+
+	/* Return the interrupt number of the cascade */
+	return irqctrler->intrs[0].line;
+}
+
+#ifdef CONFIG_XMON
+static struct irqaction xmon_action = {
+	.handler	= xmon_irq,
+	.flags		= 0,
+	.mask		= CPU_MASK_NONE,
+	.name		= "NMI - XMON"
+};
+#endif
+
+static struct irqaction gatwick_cascade_action = {
+	.handler	= gatwick_action,
+	.flags		= SA_INTERRUPT,
+	.mask		= CPU_MASK_NONE,
+	.name		= "cascade",
+};
+#endif /* CONFIG_PPC32 */
+
+static int pmac_u3_cascade(struct pt_regs *regs, void *data)
+{
+	return mpic_get_one_irq((struct mpic *)data, regs);
+}
+
+void __init pmac_pic_init(void)
+{
+        struct device_node *irqctrler  = NULL;
+        struct device_node *irqctrler2 = NULL;
+	struct device_node *np;
+#ifdef CONFIG_PPC32
+        int i;
+        unsigned long addr;
+	int irq_cascade = -1;
+#endif
+	struct mpic *mpic1, *mpic2;
+
+	/* We first try to detect Apple's new Core99 chipset, since mac-io
+	 * is quite different on those machines and contains an IBM MPIC2.
+	 */
+	np = find_type_devices("open-pic");
+	while (np) {
+		if (np->parent && !strcmp(np->parent->name, "u3"))
+			irqctrler2 = np;
+		else
+			irqctrler = np;
+		np = np->next;
+	}
+	if (irqctrler != NULL && irqctrler->n_addrs > 0) {
+		unsigned char senses[128];
+
+		printk(KERN_INFO "PowerMac using OpenPIC irq controller at 0x%08x\n",
+		       (unsigned int)irqctrler->addrs[0].address);
+		pmac_call_feature(PMAC_FTR_ENABLE_MPIC, irqctrler, 0, 0);
+
+		prom_get_irq_senses(senses, 0, 128);
+		mpic1 = mpic_alloc(irqctrler->addrs[0].address,
+				   MPIC_PRIMARY | MPIC_WANTS_RESET,
+				   0, 0, 128, 252, senses, 128, " OpenPIC  ");
+		BUG_ON(mpic1 == NULL);
+		mpic_init(mpic1);		
+
+		if (irqctrler2 != NULL && irqctrler2->n_intrs > 0 &&
+		    irqctrler2->n_addrs > 0) {
+			printk(KERN_INFO "Slave OpenPIC at 0x%08x hooked on IRQ %d\n",
+			       (u32)irqctrler2->addrs[0].address,
+			       irqctrler2->intrs[0].line);
+
+			pmac_call_feature(PMAC_FTR_ENABLE_MPIC, irqctrler2, 0, 0);
+			prom_get_irq_senses(senses, 128, 128 + 124);
+
+			/* We don't need to set MPIC_BROKEN_U3 here since we don't have
+			 * hypertransport interrupts routed to it
+			 */
+			mpic2 = mpic_alloc(irqctrler2->addrs[0].address,
+					   MPIC_BIG_ENDIAN | MPIC_WANTS_RESET,
+					   0, 128, 124, 0, senses, 124,
+					   " U3-MPIC  ");
+			BUG_ON(mpic2 == NULL);
+			mpic_init(mpic2);
+			mpic_setup_cascade(irqctrler2->intrs[0].line,
+					   pmac_u3_cascade, mpic2);
+		}
+#if defined(CONFIG_XMON) && defined(CONFIG_PPC32)
+		{
+			struct device_node* pswitch;
+			int nmi_irq;
+
+			pswitch = find_devices("programmer-switch");
+			if (pswitch && pswitch->n_intrs) {
+				nmi_irq = pswitch->intrs[0].line;
+				mpic_irq_set_priority(nmi_irq, 9);
+				setup_irq(nmi_irq, &xmon_action);
+			}
+		}
+#endif	/* CONFIG_XMON */
+		return;
+	}
+	irqctrler = NULL;
+
+#ifdef CONFIG_PPC32
+	/* Get the level/edge settings, assume if it's not
+	 * a Grand Central nor an OHare, then it's an Heathrow
+	 * (or Paddington).
+	 */
+	ppc_md.get_irq = pmac_get_irq;
+	if (find_devices("gc"))
+		level_mask[0] = GC_LEVEL_MASK;
+	else if (find_devices("ohare")) {
+		level_mask[0] = OHARE_LEVEL_MASK;
+		/* We might have a second cascaded ohare */
+		level_mask[1] = OHARE_LEVEL_MASK;
+	} else {
+		level_mask[0] = HEATHROW_LEVEL_MASK;
+		level_mask[1] = 0;
+		/* We might have a second cascaded heathrow */
+		level_mask[2] = HEATHROW_LEVEL_MASK;
+		level_mask[3] = 0;
+	}
+
+	/*
+	 * G3 powermacs and 1999 G3 PowerBooks have 64 interrupts,
+	 * 1998 G3 Series PowerBooks have 128,
+	 * other powermacs have 32.
+	 * The combo ethernet/modem card for the Powerstar powerbooks
+	 * (2400/3400/3500, ohare based) has a second ohare chip
+	 * effectively making a total of 64.
+	 */
+	max_irqs = max_real_irqs = 32;
+	irqctrler = find_devices("mac-io");
+	if (irqctrler)
+	{
+		max_real_irqs = 64;
+		if (irqctrler->next)
+			max_irqs = 128;
+		else
+			max_irqs = 64;
+	}
+	for ( i = 0; i < max_real_irqs ; i++ )
+		irq_desc[i].handler = &pmac_pic;
+
+	/* get addresses of first controller */
+	if (irqctrler) {
+		if  (irqctrler->n_addrs > 0) {
+			addr = (unsigned long)
+				ioremap(irqctrler->addrs[0].address, 0x40);
+			for (i = 0; i < 2; ++i)
+				pmac_irq_hw[i] = (volatile struct pmac_irq_hw*)
+					(addr + (2 - i) * 0x10);
+		}
+
+		/* get addresses of second controller */
+		irqctrler = irqctrler->next;
+		if (irqctrler && irqctrler->n_addrs > 0) {
+			addr = (unsigned long)
+				ioremap(irqctrler->addrs[0].address, 0x40);
+			for (i = 2; i < 4; ++i)
+				pmac_irq_hw[i] = (volatile struct pmac_irq_hw*)
+					(addr + (4 - i) * 0x10);
+			irq_cascade = irqctrler->intrs[0].line;
+			if (device_is_compatible(irqctrler, "gatwick"))
+				pmac_fix_gatwick_interrupts(irqctrler, max_real_irqs);
+		}
+	} else {
+		/* older powermacs have a GC (grand central) or ohare at
+		   f3000000, with interrupt control registers at f3000020. */
+		addr = (unsigned long) ioremap(0xf3000000, 0x40);
+		pmac_irq_hw[0] = (volatile struct pmac_irq_hw *) (addr + 0x20);
+	}
+
+	/* PowerBooks 3400 and 3500 can have a second controller in a second
+	   ohare chip, on the combo ethernet/modem card */
+	if (machine_is_compatible("AAPL,3400/2400")
+	     || machine_is_compatible("AAPL,3500"))
+		irq_cascade = enable_second_ohare();
+
+	/* disable all interrupts in all controllers */
+	for (i = 0; i * 32 < max_irqs; ++i)
+		out_le32(&pmac_irq_hw[i]->enable, 0);
+	/* mark level interrupts */
+	for (i = 0; i < max_irqs; i++)
+		if (level_mask[i >> 5] & (1UL << (i & 0x1f)))
+			irq_desc[i].status = IRQ_LEVEL;
+
+	/* get interrupt line of secondary interrupt controller */
+	if (irq_cascade >= 0) {
+		printk(KERN_INFO "irq: secondary controller on irq %d\n",
+			(int)irq_cascade);
+		for ( i = max_real_irqs ; i < max_irqs ; i++ )
+			irq_desc[i].handler = &gatwick_pic;
+		setup_irq(irq_cascade, &gatwick_cascade_action);
+	}
+	printk("System has %d possible interrupts\n", max_irqs);
+	if (max_irqs != max_real_irqs)
+		printk(KERN_DEBUG "%d interrupts on main controller\n",
+			max_real_irqs);
+
+#ifdef CONFIG_XMON
+	setup_irq(20, &xmon_action);
+#endif	/* CONFIG_XMON */
+#endif	/* CONFIG_PPC32 */
+}
+
+#ifdef CONFIG_PM
+/*
+ * These procedures are used in implementing sleep on the powerbooks.
+ * sleep_save_intrs() saves the states of all interrupt enables
+ * and disables all interrupts except for the nominated one.
+ * sleep_restore_intrs() restores the states of all interrupt enables.
+ */
+unsigned long sleep_save_mask[2];
+
+/* This used to be passed by the PMU driver but that link got
+ * broken with the new driver model. We use this tweak for now...
+ */
+static int pmacpic_find_viaint(void)
+{
+	int viaint = -1;
+
+#ifdef CONFIG_ADB_PMU
+	struct device_node *np;
+
+	if (pmu_get_model() != PMU_OHARE_BASED)
+		goto not_found;
+	np = of_find_node_by_name(NULL, "via-pmu");
+	if (np == NULL)
+		goto not_found;
+	viaint = np->intrs[0].line;
+#endif /* CONFIG_ADB_PMU */
+
+not_found:
+	return viaint;
+}
+
+static int pmacpic_suspend(struct sys_device *sysdev, pm_message_t state)
+{
+	int viaint = pmacpic_find_viaint();
+
+	sleep_save_mask[0] = ppc_cached_irq_mask[0];
+	sleep_save_mask[1] = ppc_cached_irq_mask[1];
+	ppc_cached_irq_mask[0] = 0;
+	ppc_cached_irq_mask[1] = 0;
+	if (viaint > 0)
+		set_bit(viaint, ppc_cached_irq_mask);
+	out_le32(&pmac_irq_hw[0]->enable, ppc_cached_irq_mask[0]);
+	if (max_real_irqs > 32)
+		out_le32(&pmac_irq_hw[1]->enable, ppc_cached_irq_mask[1]);
+	(void)in_le32(&pmac_irq_hw[0]->event);
+	/* make sure mask gets to controller before we return to caller */
+	mb();
+        (void)in_le32(&pmac_irq_hw[0]->enable);
+
+        return 0;
+}
+
+static int pmacpic_resume(struct sys_device *sysdev)
+{
+	int i;
+
+	out_le32(&pmac_irq_hw[0]->enable, 0);
+	if (max_real_irqs > 32)
+		out_le32(&pmac_irq_hw[1]->enable, 0);
+	mb();
+	for (i = 0; i < max_real_irqs; ++i)
+		if (test_bit(i, sleep_save_mask))
+			pmac_unmask_irq(i);
+
+	return 0;
+}
+
+#endif /* CONFIG_PM */
+
+static struct sysdev_class pmacpic_sysclass = {
+	set_kset_name("pmac_pic"),
+};
+
+static struct sys_device device_pmacpic = {
+	.id		= 0,
+	.cls		= &pmacpic_sysclass,
+};
+
+static struct sysdev_driver driver_pmacpic = {
+#ifdef CONFIG_PM
+	.suspend	= &pmacpic_suspend,
+	.resume		= &pmacpic_resume,
+#endif /* CONFIG_PM */
+};
+
+static int __init init_pmacpic_sysfs(void)
+{
+#ifdef CONFIG_PPC32
+	if (max_irqs == 0)
+		return -ENODEV;
+#endif
+	printk(KERN_DEBUG "Registering pmac pic with sysfs...\n");
+	sysdev_class_register(&pmacpic_sysclass);
+	sysdev_register(&device_pmacpic);
+	sysdev_driver_register(&pmacpic_sysclass, &driver_pmacpic);
+	return 0;
+}
+
+subsys_initcall(init_pmacpic_sysfs);
+