diff options
Diffstat (limited to 'arch/powerpc/platforms/embedded6xx')
19 files changed, 2633 insertions, 440 deletions
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig index 234a861870a..a25f496c2ef 100644 --- a/arch/powerpc/platforms/embedded6xx/Kconfig +++ b/arch/powerpc/platforms/embedded6xx/Kconfig @@ -1,316 +1,118 @@ -choice - prompt "Machine Type" - depends on EMBEDDED6xx - -config KATANA - bool "Artesyn-Katana" - help - Select KATANA if configuring an Artesyn KATANA 750i or 3750 - cPCI board. - -config WILLOW - bool "Cogent-Willow" - -config CPCI690 - bool "Force-CPCI690" - help - Select CPCI690 if configuring a Force CPCI690 cPCI board. - -config POWERPMC250 - bool "Force-PowerPMC250" - -config CHESTNUT - bool "IBM 750FX Eval board or 750GX Eval board" - help - Select CHESTNUT if configuring an IBM 750FX Eval Board or a - IBM 750GX Eval board. - -config SPRUCE - bool "IBM-Spruce" - select PPC_INDIRECT_PCI - -config HDPU - bool "Sky-HDPU" - help - Select HDPU if configuring a Sky Computers Compute Blade. +config EMBEDDED6xx + bool "Embedded 6xx/7xx/7xxx-based boards" + depends on 6xx && BROKEN_ON_SMP -config HDPU_FEATURES - depends HDPU - tristate "HDPU-Features" - help - Select to enable HDPU enhanced features. - -config EV64260 - bool "Marvell-EV64260BP" +config LINKSTATION + bool "Linkstation / Kurobox(HG) from Buffalo" + depends on EMBEDDED6xx + select MPIC + select FSL_SOC + select PPC_UDBG_16550 if SERIAL_8250 + select DEFAULT_UIMAGE + select MPC10X_BRIDGE help - Select EV64260 if configuring a Marvell (formerly Galileo) - EV64260BP Evaluation platform. - -config LOPEC - bool "Motorola-LoPEC" - select PPC_I8259 - -config MVME5100 - bool "Motorola-MVME5100" - select PPC_INDIRECT_PCI - -config PPLUS - bool "Motorola-PowerPlus" - select PPC_I8259 - select PPC_INDIRECT_PCI + Select LINKSTATION if configuring for one of PPC- (MPC8241) + based NAS systems from Buffalo Technology. So far only + KuroboxHG has been tested. In the future classical Kurobox, + Linkstation-I HD-HLAN and HD-HGLAN versions, and PPC-based + Terastation systems should be supported too. -config PRPMC750 - bool "Motorola-PrPMC750" - select PPC_INDIRECT_PCI - -config PRPMC800 - bool "Motorola-PrPMC800" - select PPC_INDIRECT_PCI - -config SANDPOINT - bool "Motorola-Sandpoint" - select PPC_I8259 +config STORCENTER + bool "IOMEGA StorCenter" + depends on EMBEDDED6xx + select MPIC + select FSL_SOC + select PPC_UDBG_16550 if SERIAL_8250 + select MPC10X_BRIDGE help - Select SANDPOINT if configuring for a Motorola Sandpoint X3 - (any flavor). + Select STORCENTER if configuring for the iomega StorCenter + with an 8241 CPU in it. config MPC7448HPC2 bool "Freescale MPC7448HPC2(Taiga)" + depends on EMBEDDED6xx select TSI108_BRIDGE select DEFAULT_UIMAGE select PPC_UDBG_16550 - select MPIC - select MPIC_WEIRD help Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga) platform -config RADSTONE_PPC7D - bool "Radstone Technology PPC7D board" - select PPC_I8259 - -config PAL4 - bool "SBS-Palomar4" - -config GEMINI - bool "Synergy-Gemini" - select PPC_INDIRECT_PCI - depends on BROKEN - help - Select Gemini if configuring for a Synergy Microsystems' Gemini - series Single Board Computer. More information is available at: - <http://www.synergymicro.com/PressRel/97_10_15.html>. - -config EST8260 - bool "EST8260" - ---help--- - The EST8260 is a single-board computer manufactured by Wind River - Systems, Inc. (formerly Embedded Support Tools Corp.) and based on - the MPC8260. Wind River Systems has a website at - <http://www.windriver.com/>, but the EST8260 cannot be found on it - and has probably been discontinued or rebadged. - -config SBC82xx - bool "SBC82xx" - ---help--- - SBC PowerQUICC II, single-board computer with MPC82xx CPU - Manufacturer: Wind River Systems, Inc. - Date of Release: May 2003 - End of Life: - - URL: <http://www.windriver.com/> - -config SBS8260 - bool "SBS8260" - -config RPX8260 - bool "RPXSUPER" - -config TQM8260 - bool "TQM8260" - ---help--- - MPC8260 based module, little larger than credit card, - up to 128 MB global + 64 MB local RAM, 32 MB Flash, - 32 kB EEPROM, 256 kB L@ Cache, 10baseT + 100baseT Ethernet, - 2 x serial ports, ... - Manufacturer: TQ Components, www.tq-group.de - Date of Release: June 2001 - End of Life: not yet :-) - URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf> - -config ADS8272 - bool "ADS8272" - -config PQ2FADS - bool "Freescale-PQ2FADS" - help - Select PQ2FADS if you wish to configure for a Freescale - PQ2FADS board (-VR or -ZU). - -config LITE5200 - bool "Freescale LITE5200 / (IceCube)" - select PPC_MPC52xx - help - Support for the LITE5200 dev board for the MPC5200 from Freescale. - This is for the LITE5200 version 2.0 board. Don't know if it changes - much but it's only been tested on this board version. I think this - board is also known as IceCube. - -config EV64360 - bool "Marvell-EV64360BP" - help - Select EV64360 if configuring a Marvell EV64360BP Evaluation - platform. -endchoice - -config PQ2ADS - bool - depends on ADS8272 - default y - -config TQM8xxL - bool - depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L) - default y - -config PPC_MPC52xx - bool - -config 8260 - bool "CPM2 Support" if WILLOW - depends on 6xx - default y if TQM8260 || RPX8260 || EST8260 || SBS8260 || SBC82xx || PQ2FADS +config PPC_HOLLY + bool "PPC750GX/CL with TSI10x bridge (Hickory/Holly)" + depends on EMBEDDED6xx + select TSI108_BRIDGE + select PPC_UDBG_16550 help - The MPC8260 is a typical embedded CPU made by Motorola. Selecting - this option means that you wish to build a kernel for a machine with - an 8260 class CPU. + Select PPC_HOLLY if configuring for an IBM 750GX/CL Eval + Board with TSI108/9 bridge (Hickory/Holly) -config 8272 - bool - depends on 6xx - default y if ADS8272 - select 8260 +config PPC_C2K + bool "SBS/GEFanuc C2K board" + depends on EMBEDDED6xx + select MV64X60 + select NOT_COHERENT_CACHE + select MTD_CFI_I4 help - The MPC8272 CPM has a different internal dpram setup than other CPM2 - devices + This option enables support for the GE Fanuc C2K board (formerly + an SBS board). -config CPM2 - bool - depends on 8260 || MPC8560 || MPC8555 - default y +config MVME5100 + bool "Motorola/Emerson MVME5100" + depends on EMBEDDED6xx + select MPIC + select PCI + select PPC_INDIRECT_PCI + select PPC_I8259 + select PPC_NATIVE + select PPC_UDBG_16550 help - The CPM2 (Communications Processor Module) is a coprocessor on - embedded CPUs made by Motorola. Selecting this option means that - you wish to build a kernel for a machine with a CPM2 coprocessor - on it (826x, 827x, 8560). + This option enables support for the Motorola (now Emerson) MVME5100 + board. -config PPC_GEN550 - bool - depends on SANDPOINT || SPRUCE || PPLUS || \ - PRPMC750 || PRPMC800 || LOPEC || \ - (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \ - 83xx - default y - -config FORCE - bool - depends on 6xx && POWERPMC250 - default y - -config GT64260 +config TSI108_BRIDGE bool - depends on EV64260 || CPCI690 - default y + select PCI + select MPIC + select MPIC_WEIRD -config MV64360 # Really MV64360 & MV64460 +config MPC10X_BRIDGE bool - depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU || EV64360 - default y + select PPC_INDIRECT_PCI config MV64X60 bool - depends on (GT64260 || MV64360) select PPC_INDIRECT_PCI - default y + select CHECK_CACHE_COHERENCY -config TSI108_BRIDGE +config GAMECUBE_COMMON bool - depends on MPC7448HPC2 - default y - -menu "Set bridge options" - depends on MV64X60 - -config NOT_COHERENT_CACHE - bool "Turn off Cache Coherency" - default n - help - Some 64x60 bridges lock up when trying to enforce cache coherency. - When this option is selected, cache coherency will be turned off. - Note that this can cause other problems (e.g., stale data being - speculatively loaded via a cached mapping). Use at your own risk. -config MV64X60_BASE - hex "Set bridge base used by firmware" - default "0xf1000000" +config USBGECKO_UDBG + bool "USB Gecko udbg console for the Nintendo GameCube/Wii" + depends on GAMECUBE_COMMON help - A firmware can leave the base address of the bridge's registers at - a non-standard location. If so, set this value to reflect the - address of that non-standard location. - -config MV64X60_NEW_BASE - hex "Set bridge base used by kernel" - default "0xf1000000" - help - If the current base address of the bridge's registers is not where - you want it, set this value to the address that you want it moved to. - -endmenu - -config NONMONARCH_SUPPORT - bool "Enable Non-Monarch Support" - depends on PRPMC800 - -config HARRIER - bool - depends on PRPMC800 - default y + If you say yes to this option, support will be included for the + USB Gecko adapter as an udbg console. + The USB Gecko is a EXI to USB Serial converter that can be plugged + into a memcard slot in the Nintendo GameCube/Wii. -config EPIC_SERIAL_MODE - bool - depends on 6xx && (LOPEC || SANDPOINT) - default y - -config MPC10X_BRIDGE - bool - depends on POWERPMC250 || LOPEC || SANDPOINT - select PPC_INDIRECT_PCI - default y - -config MPC10X_OPENPIC - bool - depends on POWERPMC250 || LOPEC || SANDPOINT - default y + This driver bypasses the EXI layer completely. -config MPC10X_STORE_GATHERING - bool "Enable MPC10x store gathering" - depends on MPC10X_BRIDGE + If in doubt, say N here. -config SANDPOINT_ENABLE_UART1 - bool "Enable DUART mode on Sandpoint" - depends on SANDPOINT +config GAMECUBE + bool "Nintendo-GameCube" + depends on EMBEDDED6xx + select GAMECUBE_COMMON help - If this option is enabled then the MPC824x processor will run - in DUART mode instead of UART mode. - -config HARRIER_STORE_GATHERING - bool "Enable Harrier store gathering" - depends on HARRIER - -config MVME5100_IPMC761_PRESENT - bool "MVME5100 configured with an IPMC761" - depends on MVME5100 - select PPC_I8259 + Select GAMECUBE if configuring for the Nintendo GameCube. + More information at: <http://gc-linux.sourceforge.net/> -config SPRUCE_BAUD_33M - bool "Spruce baud clock support" - depends on SPRUCE +config WII + bool "Nintendo-Wii" + depends on EMBEDDED6xx + select GAMECUBE_COMMON + help + Select WII if configuring for the Nintendo Wii. + More information at: <http://gc-linux.sourceforge.net/> diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile index fa499fe5929..f126a2a0998 100644 --- a/arch/powerpc/platforms/embedded6xx/Makefile +++ b/arch/powerpc/platforms/embedded6xx/Makefile @@ -2,3 +2,12 @@ # Makefile for the 6xx/7xx/7xxxx linux kernel. # obj-$(CONFIG_MPC7448HPC2) += mpc7448_hpc2.o +obj-$(CONFIG_LINKSTATION) += linkstation.o ls_uart.o +obj-$(CONFIG_STORCENTER) += storcenter.o +obj-$(CONFIG_PPC_HOLLY) += holly.o +obj-$(CONFIG_PPC_C2K) += c2k.o +obj-$(CONFIG_USBGECKO_UDBG) += usbgecko_udbg.o +obj-$(CONFIG_GAMECUBE_COMMON) += flipper-pic.o +obj-$(CONFIG_GAMECUBE) += gamecube.o +obj-$(CONFIG_WII) += wii.o hlwd-pic.o +obj-$(CONFIG_MVME5100) += mvme5100.o diff --git a/arch/powerpc/platforms/embedded6xx/c2k.c b/arch/powerpc/platforms/embedded6xx/c2k.c new file mode 100644 index 00000000000..ebd3963fdf9 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/c2k.c @@ -0,0 +1,148 @@ +/* + * Board setup routines for the GEFanuc C2K board + * + * Author: Remi Machet <rmachet@slac.stanford.edu> + * + * Originated from prpmc2800.c + * + * 2008 (c) Stanford University + * 2007 (c) MontaVista, Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/seq_file.h> +#include <linux/time.h> +#include <linux/of.h> + +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/time.h> + +#include <mm/mmu_decl.h> + +#include <sysdev/mv64x60.h> + +#define MV64x60_MPP_CNTL_0 0x0000 +#define MV64x60_MPP_CNTL_2 0x0008 + +#define MV64x60_GPP_IO_CNTL 0x0000 +#define MV64x60_GPP_LEVEL_CNTL 0x0010 +#define MV64x60_GPP_VALUE_SET 0x0018 + +static void __iomem *mv64x60_mpp_reg_base; +static void __iomem *mv64x60_gpp_reg_base; + +static void __init c2k_setup_arch(void) +{ + struct device_node *np; + phys_addr_t paddr; + const unsigned int *reg; + + /* + * ioremap mpp and gpp registers in case they are later + * needed by c2k_reset_board(). + */ + np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-mpp"); + reg = of_get_property(np, "reg", NULL); + paddr = of_translate_address(np, reg); + of_node_put(np); + mv64x60_mpp_reg_base = ioremap(paddr, reg[1]); + + np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp"); + reg = of_get_property(np, "reg", NULL); + paddr = of_translate_address(np, reg); + of_node_put(np); + mv64x60_gpp_reg_base = ioremap(paddr, reg[1]); + +#ifdef CONFIG_PCI + mv64x60_pci_init(); +#endif +} + +static void c2k_reset_board(void) +{ + u32 temp; + + local_irq_disable(); + + temp = in_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_0); + temp &= 0xFFFF0FFF; + out_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_0, temp); + + temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL); + temp |= 0x00000004; + out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL, temp); + + temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL); + temp |= 0x00000004; + out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL, temp); + + temp = in_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_2); + temp &= 0xFFFF0FFF; + out_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_2, temp); + + temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL); + temp |= 0x00080000; + out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL, temp); + + temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL); + temp |= 0x00080000; + out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL, temp); + + out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_VALUE_SET, 0x00080004); +} + +static void c2k_restart(char *cmd) +{ + c2k_reset_board(); + msleep(100); + panic("restart failed\n"); +} + +#ifdef CONFIG_NOT_COHERENT_CACHE +#define COHERENCY_SETTING "off" +#else +#define COHERENCY_SETTING "on" +#endif + +void c2k_show_cpuinfo(struct seq_file *m) +{ + seq_printf(m, "Vendor\t\t: GEFanuc\n"); + seq_printf(m, "coherency\t: %s\n", COHERENCY_SETTING); +} + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init c2k_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "GEFanuc,C2K")) + return 0; + + printk(KERN_INFO "Detected a GEFanuc C2K board\n"); + + _set_L2CR(0); + _set_L2CR(L2CR_L2E | L2CR_L2PE | L2CR_L2I); + return 1; +} + +define_machine(c2k) { + .name = "C2K", + .probe = c2k_probe, + .setup_arch = c2k_setup_arch, + .init_early = mv64x60_init_early, + .show_cpuinfo = c2k_show_cpuinfo, + .init_IRQ = mv64x60_init_irq, + .get_irq = mv64x60_get_irq, + .restart = c2k_restart, + .calibrate_decr = generic_calibrate_decr, +}; diff --git a/arch/powerpc/platforms/embedded6xx/flipper-pic.c b/arch/powerpc/platforms/embedded6xx/flipper-pic.c new file mode 100644 index 00000000000..4cde8e7da4b --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/flipper-pic.c @@ -0,0 +1,255 @@ +/* + * arch/powerpc/platforms/embedded6xx/flipper-pic.c + * + * Nintendo GameCube/Wii "Flipper" interrupt controller support. + * Copyright (C) 2004-2009 The GameCube Linux Team + * Copyright (C) 2007,2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ +#define DRV_MODULE_NAME "flipper-pic" +#define pr_fmt(fmt) DRV_MODULE_NAME ": " fmt + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <asm/io.h> + +#include "flipper-pic.h" + +#define FLIPPER_NR_IRQS 32 + +/* + * Each interrupt has a corresponding bit in both + * the Interrupt Cause (ICR) and Interrupt Mask (IMR) registers. + * + * Enabling/disabling an interrupt line involves setting/clearing + * the corresponding bit in IMR. + * Except for the RSW interrupt, all interrupts get deasserted automatically + * when the source deasserts the interrupt. + */ +#define FLIPPER_ICR 0x00 +#define FLIPPER_ICR_RSS (1<<16) /* reset switch state */ + +#define FLIPPER_IMR 0x04 + +#define FLIPPER_RESET 0x24 + + +/* + * IRQ chip hooks. + * + */ + +static void flipper_pic_mask_and_ack(struct irq_data *d) +{ + int irq = irqd_to_hwirq(d); + void __iomem *io_base = irq_data_get_irq_chip_data(d); + u32 mask = 1 << irq; + + clrbits32(io_base + FLIPPER_IMR, mask); + /* this is at least needed for RSW */ + out_be32(io_base + FLIPPER_ICR, mask); +} + +static void flipper_pic_ack(struct irq_data *d) +{ + int irq = irqd_to_hwirq(d); + void __iomem *io_base = irq_data_get_irq_chip_data(d); + + /* this is at least needed for RSW */ + out_be32(io_base + FLIPPER_ICR, 1 << irq); +} + +static void flipper_pic_mask(struct irq_data *d) +{ + int irq = irqd_to_hwirq(d); + void __iomem *io_base = irq_data_get_irq_chip_data(d); + + clrbits32(io_base + FLIPPER_IMR, 1 << irq); +} + +static void flipper_pic_unmask(struct irq_data *d) +{ + int irq = irqd_to_hwirq(d); + void __iomem *io_base = irq_data_get_irq_chip_data(d); + + setbits32(io_base + FLIPPER_IMR, 1 << irq); +} + + +static struct irq_chip flipper_pic = { + .name = "flipper-pic", + .irq_ack = flipper_pic_ack, + .irq_mask_ack = flipper_pic_mask_and_ack, + .irq_mask = flipper_pic_mask, + .irq_unmask = flipper_pic_unmask, +}; + +/* + * IRQ host hooks. + * + */ + +static struct irq_domain *flipper_irq_host; + +static int flipper_pic_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hwirq) +{ + irq_set_chip_data(virq, h->host_data); + irq_set_status_flags(virq, IRQ_LEVEL); + irq_set_chip_and_handler(virq, &flipper_pic, handle_level_irq); + return 0; +} + +static int flipper_pic_match(struct irq_domain *h, struct device_node *np) +{ + return 1; +} + + +static const struct irq_domain_ops flipper_irq_domain_ops = { + .map = flipper_pic_map, + .match = flipper_pic_match, +}; + +/* + * Platform hooks. + * + */ + +static void __flipper_quiesce(void __iomem *io_base) +{ + /* mask and ack all IRQs */ + out_be32(io_base + FLIPPER_IMR, 0x00000000); + out_be32(io_base + FLIPPER_ICR, 0xffffffff); +} + +struct irq_domain * __init flipper_pic_init(struct device_node *np) +{ + struct device_node *pi; + struct irq_domain *irq_domain = NULL; + struct resource res; + void __iomem *io_base; + int retval; + + pi = of_get_parent(np); + if (!pi) { + pr_err("no parent found\n"); + goto out; + } + if (!of_device_is_compatible(pi, "nintendo,flipper-pi")) { + pr_err("unexpected parent compatible\n"); + goto out; + } + + retval = of_address_to_resource(pi, 0, &res); + if (retval) { + pr_err("no io memory range found\n"); + goto out; + } + io_base = ioremap(res.start, resource_size(&res)); + + pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base); + + __flipper_quiesce(io_base); + + irq_domain = irq_domain_add_linear(np, FLIPPER_NR_IRQS, + &flipper_irq_domain_ops, io_base); + if (!irq_domain) { + pr_err("failed to allocate irq_domain\n"); + return NULL; + } + +out: + return irq_domain; +} + +unsigned int flipper_pic_get_irq(void) +{ + void __iomem *io_base = flipper_irq_host->host_data; + int irq; + u32 irq_status; + + irq_status = in_be32(io_base + FLIPPER_ICR) & + in_be32(io_base + FLIPPER_IMR); + if (irq_status == 0) + return NO_IRQ; /* no more IRQs pending */ + + irq = __ffs(irq_status); + return irq_linear_revmap(flipper_irq_host, irq); +} + +/* + * Probe function. + * + */ + +void __init flipper_pic_probe(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "nintendo,flipper-pic"); + BUG_ON(!np); + + flipper_irq_host = flipper_pic_init(np); + BUG_ON(!flipper_irq_host); + + irq_set_default_host(flipper_irq_host); + + of_node_put(np); +} + +/* + * Misc functions related to the flipper chipset. + * + */ + +/** + * flipper_quiesce() - quiesce flipper irq controller + * + * Mask and ack all interrupt sources. + * + */ +void flipper_quiesce(void) +{ + void __iomem *io_base = flipper_irq_host->host_data; + + __flipper_quiesce(io_base); +} + +/* + * Resets the platform. + */ +void flipper_platform_reset(void) +{ + void __iomem *io_base; + + if (flipper_irq_host && flipper_irq_host->host_data) { + io_base = flipper_irq_host->host_data; + out_8(io_base + FLIPPER_RESET, 0x00); + } +} + +/* + * Returns non-zero if the reset button is pressed. + */ +int flipper_is_reset_button_pressed(void) +{ + void __iomem *io_base; + u32 icr; + + if (flipper_irq_host && flipper_irq_host->host_data) { + io_base = flipper_irq_host->host_data; + icr = in_be32(io_base + FLIPPER_ICR); + return !(icr & FLIPPER_ICR_RSS); + } + return 0; +} + diff --git a/arch/powerpc/platforms/embedded6xx/flipper-pic.h b/arch/powerpc/platforms/embedded6xx/flipper-pic.h new file mode 100644 index 00000000000..e339186b566 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/flipper-pic.h @@ -0,0 +1,25 @@ +/* + * arch/powerpc/platforms/embedded6xx/flipper-pic.h + * + * Nintendo GameCube/Wii "Flipper" interrupt controller support. + * Copyright (C) 2004-2009 The GameCube Linux Team + * Copyright (C) 2007,2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#ifndef __FLIPPER_PIC_H +#define __FLIPPER_PIC_H + +unsigned int flipper_pic_get_irq(void); +void __init flipper_pic_probe(void); + +void flipper_quiesce(void); +void flipper_platform_reset(void); +int flipper_is_reset_button_pressed(void); + +#endif diff --git a/arch/powerpc/platforms/embedded6xx/gamecube.c b/arch/powerpc/platforms/embedded6xx/gamecube.c new file mode 100644 index 00000000000..a138e14bad2 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/gamecube.c @@ -0,0 +1,107 @@ +/* + * arch/powerpc/platforms/embedded6xx/gamecube.c + * + * Nintendo GameCube board-specific support + * Copyright (C) 2004-2009 The GameCube Linux Team + * Copyright (C) 2007,2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/kexec.h> +#include <linux/seq_file.h> +#include <linux/of_platform.h> + +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/time.h> +#include <asm/udbg.h> + +#include "flipper-pic.h" +#include "usbgecko_udbg.h" + + +static void gamecube_spin(void) +{ + /* spin until power button pressed */ + for (;;) + cpu_relax(); +} + +static void gamecube_restart(char *cmd) +{ + local_irq_disable(); + flipper_platform_reset(); + gamecube_spin(); +} + +static void gamecube_power_off(void) +{ + local_irq_disable(); + gamecube_spin(); +} + +static void gamecube_halt(void) +{ + gamecube_restart(NULL); +} + +static void __init gamecube_init_early(void) +{ + ug_udbg_init(); +} + +static int __init gamecube_probe(void) +{ + unsigned long dt_root; + + dt_root = of_get_flat_dt_root(); + if (!of_flat_dt_is_compatible(dt_root, "nintendo,gamecube")) + return 0; + + return 1; +} + +static void gamecube_shutdown(void) +{ + flipper_quiesce(); +} + +define_machine(gamecube) { + .name = "gamecube", + .probe = gamecube_probe, + .init_early = gamecube_init_early, + .restart = gamecube_restart, + .power_off = gamecube_power_off, + .halt = gamecube_halt, + .init_IRQ = flipper_pic_probe, + .get_irq = flipper_pic_get_irq, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, + .machine_shutdown = gamecube_shutdown, +}; + + +static struct of_device_id gamecube_of_bus[] = { + { .compatible = "nintendo,flipper", }, + { }, +}; + +static int __init gamecube_device_probe(void) +{ + if (!machine_is(gamecube)) + return 0; + + of_platform_bus_probe(NULL, gamecube_of_bus, NULL); + return 0; +} +device_initcall(gamecube_device_probe); + diff --git a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c new file mode 100644 index 00000000000..c269caee58f --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c @@ -0,0 +1,236 @@ +/* + * arch/powerpc/platforms/embedded6xx/hlwd-pic.c + * + * Nintendo Wii "Hollywood" interrupt controller support. + * Copyright (C) 2009 The GameCube Linux Team + * Copyright (C) 2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ +#define DRV_MODULE_NAME "hlwd-pic" +#define pr_fmt(fmt) DRV_MODULE_NAME ": " fmt + +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <asm/io.h> + +#include "hlwd-pic.h" + +#define HLWD_NR_IRQS 32 + +/* + * Each interrupt has a corresponding bit in both + * the Interrupt Cause (ICR) and Interrupt Mask (IMR) registers. + * + * Enabling/disabling an interrupt line involves asserting/clearing + * the corresponding bit in IMR. ACK'ing a request simply involves + * asserting the corresponding bit in ICR. + */ +#define HW_BROADWAY_ICR 0x00 +#define HW_BROADWAY_IMR 0x04 + + +/* + * IRQ chip hooks. + * + */ + +static void hlwd_pic_mask_and_ack(struct irq_data *d) +{ + int irq = irqd_to_hwirq(d); + void __iomem *io_base = irq_data_get_irq_chip_data(d); + u32 mask = 1 << irq; + + clrbits32(io_base + HW_BROADWAY_IMR, mask); + out_be32(io_base + HW_BROADWAY_ICR, mask); +} + +static void hlwd_pic_ack(struct irq_data *d) +{ + int irq = irqd_to_hwirq(d); + void __iomem *io_base = irq_data_get_irq_chip_data(d); + + out_be32(io_base + HW_BROADWAY_ICR, 1 << irq); +} + +static void hlwd_pic_mask(struct irq_data *d) +{ + int irq = irqd_to_hwirq(d); + void __iomem *io_base = irq_data_get_irq_chip_data(d); + + clrbits32(io_base + HW_BROADWAY_IMR, 1 << irq); +} + +static void hlwd_pic_unmask(struct irq_data *d) +{ + int irq = irqd_to_hwirq(d); + void __iomem *io_base = irq_data_get_irq_chip_data(d); + + setbits32(io_base + HW_BROADWAY_IMR, 1 << irq); +} + + +static struct irq_chip hlwd_pic = { + .name = "hlwd-pic", + .irq_ack = hlwd_pic_ack, + .irq_mask_ack = hlwd_pic_mask_and_ack, + .irq_mask = hlwd_pic_mask, + .irq_unmask = hlwd_pic_unmask, +}; + +/* + * IRQ host hooks. + * + */ + +static struct irq_domain *hlwd_irq_host; + +static int hlwd_pic_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hwirq) +{ + irq_set_chip_data(virq, h->host_data); + irq_set_status_flags(virq, IRQ_LEVEL); + irq_set_chip_and_handler(virq, &hlwd_pic, handle_level_irq); + return 0; +} + +static const struct irq_domain_ops hlwd_irq_domain_ops = { + .map = hlwd_pic_map, +}; + +static unsigned int __hlwd_pic_get_irq(struct irq_domain *h) +{ + void __iomem *io_base = h->host_data; + int irq; + u32 irq_status; + + irq_status = in_be32(io_base + HW_BROADWAY_ICR) & + in_be32(io_base + HW_BROADWAY_IMR); + if (irq_status == 0) + return NO_IRQ; /* no more IRQs pending */ + + irq = __ffs(irq_status); + return irq_linear_revmap(h, irq); +} + +static void hlwd_pic_irq_cascade(unsigned int cascade_virq, + struct irq_desc *desc) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + struct irq_domain *irq_domain = irq_get_handler_data(cascade_virq); + unsigned int virq; + + raw_spin_lock(&desc->lock); + chip->irq_mask(&desc->irq_data); /* IRQ_LEVEL */ + raw_spin_unlock(&desc->lock); + + virq = __hlwd_pic_get_irq(irq_domain); + if (virq != NO_IRQ) + generic_handle_irq(virq); + else + pr_err("spurious interrupt!\n"); + + raw_spin_lock(&desc->lock); + chip->irq_ack(&desc->irq_data); /* IRQ_LEVEL */ + if (!irqd_irq_disabled(&desc->irq_data) && chip->irq_unmask) + chip->irq_unmask(&desc->irq_data); + raw_spin_unlock(&desc->lock); +} + +/* + * Platform hooks. + * + */ + +static void __hlwd_quiesce(void __iomem *io_base) +{ + /* mask and ack all IRQs */ + out_be32(io_base + HW_BROADWAY_IMR, 0); + out_be32(io_base + HW_BROADWAY_ICR, 0xffffffff); +} + +struct irq_domain *hlwd_pic_init(struct device_node *np) +{ + struct irq_domain *irq_domain; + struct resource res; + void __iomem *io_base; + int retval; + + retval = of_address_to_resource(np, 0, &res); + if (retval) { + pr_err("no io memory range found\n"); + return NULL; + } + io_base = ioremap(res.start, resource_size(&res)); + if (!io_base) { + pr_err("ioremap failed\n"); + return NULL; + } + + pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base); + + __hlwd_quiesce(io_base); + + irq_domain = irq_domain_add_linear(np, HLWD_NR_IRQS, + &hlwd_irq_domain_ops, io_base); + if (!irq_domain) { + pr_err("failed to allocate irq_domain\n"); + iounmap(io_base); + return NULL; + } + + return irq_domain; +} + +unsigned int hlwd_pic_get_irq(void) +{ + return __hlwd_pic_get_irq(hlwd_irq_host); +} + +/* + * Probe function. + * + */ + +void hlwd_pic_probe(void) +{ + struct irq_domain *host; + struct device_node *np; + const u32 *interrupts; + int cascade_virq; + + for_each_compatible_node(np, NULL, "nintendo,hollywood-pic") { + interrupts = of_get_property(np, "interrupts", NULL); + if (interrupts) { + host = hlwd_pic_init(np); + BUG_ON(!host); + cascade_virq = irq_of_parse_and_map(np, 0); + irq_set_handler_data(cascade_virq, host); + irq_set_chained_handler(cascade_virq, + hlwd_pic_irq_cascade); + hlwd_irq_host = host; + break; + } + } +} + +/** + * hlwd_quiesce() - quiesce hollywood irq controller + * + * Mask and ack all interrupt sources. + * + */ +void hlwd_quiesce(void) +{ + void __iomem *io_base = hlwd_irq_host->host_data; + + __hlwd_quiesce(io_base); +} + diff --git a/arch/powerpc/platforms/embedded6xx/hlwd-pic.h b/arch/powerpc/platforms/embedded6xx/hlwd-pic.h new file mode 100644 index 00000000000..d2e5a092761 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/hlwd-pic.h @@ -0,0 +1,22 @@ +/* + * arch/powerpc/platforms/embedded6xx/hlwd-pic.h + * + * Nintendo Wii "Hollywood" interrupt controller support. + * Copyright (C) 2009 The GameCube Linux Team + * Copyright (C) 2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#ifndef __HLWD_PIC_H +#define __HLWD_PIC_H + +extern unsigned int hlwd_pic_get_irq(void); +extern void hlwd_pic_probe(void); +extern void hlwd_quiesce(void); + +#endif diff --git a/arch/powerpc/platforms/embedded6xx/holly.c b/arch/powerpc/platforms/embedded6xx/holly.c new file mode 100644 index 00000000000..8c305c7c897 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/holly.c @@ -0,0 +1,285 @@ +/* + * Board setup routines for the IBM 750GX/CL platform w/ TSI10x bridge + * + * Copyright 2007 IBM Corporation + * + * Stephen Winiecki <stevewin@us.ibm.com> + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * Based on code from mpc7448_hpc2.c + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/serial_core.h> +#include <linux/of_platform.h> +#include <linux/module.h> + +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/tsi108.h> +#include <asm/pci-bridge.h> +#include <asm/reg.h> +#include <mm/mmu_decl.h> +#include <asm/tsi108_irq.h> +#include <asm/tsi108_pci.h> +#include <asm/mpic.h> + +#undef DEBUG + +#define HOLLY_PCI_CFG_PHYS 0x7c000000 + +int holly_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn) +{ + if (bus == 0 && PCI_SLOT(devfn) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; + else + return PCIBIOS_SUCCESSFUL; +} + +static void holly_remap_bridge(void) +{ + u32 lut_val, lut_addr; + int i; + + printk(KERN_INFO "Remapping PCI bridge\n"); + + /* Re-init the PCI bridge and LUT registers to have mappings that don't + * rely on PIBS + */ + lut_addr = 0x900; + for (i = 0; i < 31; i++) { + tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x00000201); + lut_addr += 4; + tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x0); + lut_addr += 4; + } + + /* Reserve the last LUT entry for PCI I/O space */ + tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x00000241); + lut_addr += 4; + tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x0); + + /* Map PCI I/O space */ + tsi108_write_reg(TSI108_PCI_PFAB_IO_UPPER, 0x0); + tsi108_write_reg(TSI108_PCI_PFAB_IO, 0x1); + + /* Map PCI CFG space */ + tsi108_write_reg(TSI108_PCI_PFAB_BAR0_UPPER, 0x0); + tsi108_write_reg(TSI108_PCI_PFAB_BAR0, 0x7c000000 | 0x01); + + /* We don't need MEM32 and PRM remapping so disable them */ + tsi108_write_reg(TSI108_PCI_PFAB_MEM32, 0x0); + tsi108_write_reg(TSI108_PCI_PFAB_PFM3, 0x0); + tsi108_write_reg(TSI108_PCI_PFAB_PFM4, 0x0); + + /* Set P2O_BAR0 */ + tsi108_write_reg(TSI108_PCI_P2O_BAR0_UPPER, 0x0); + tsi108_write_reg(TSI108_PCI_P2O_BAR0, 0xc0000000); + + /* Init the PCI LUTs to do no remapping */ + lut_addr = 0x500; + lut_val = 0x00000002; + + for (i = 0; i < 32; i++) { + tsi108_write_reg(TSI108_PCI_OFFSET + lut_addr, lut_val); + lut_addr += 4; + tsi108_write_reg(TSI108_PCI_OFFSET + lut_addr, 0x40000000); + lut_addr += 4; + lut_val += 0x02000000; + } + tsi108_write_reg(TSI108_PCI_P2O_PAGE_SIZES, 0x00007900); + + /* Set 64-bit PCI bus address for system memory */ + tsi108_write_reg(TSI108_PCI_P2O_BAR2_UPPER, 0x0); + tsi108_write_reg(TSI108_PCI_P2O_BAR2, 0x0); +} + +static void __init holly_setup_arch(void) +{ + struct device_node *np; + + if (ppc_md.progress) + ppc_md.progress("holly_setup_arch():set_bridge", 0); + + tsi108_csr_vir_base = get_vir_csrbase(); + + /* setup PCI host bridge */ + holly_remap_bridge(); + + np = of_find_node_by_type(NULL, "pci"); + if (np) + tsi108_setup_pci(np, HOLLY_PCI_CFG_PHYS, 1); + + ppc_md.pci_exclude_device = holly_exclude_device; + if (ppc_md.progress) + ppc_md.progress("tsi108: resources set", 0x100); + + printk(KERN_INFO "PPC750GX/CL Platform\n"); +} + +/* + * Interrupt setup and service. Interrupts on the holly come + * from the four external INT pins, PCI interrupts are routed via + * PCI interrupt control registers, it generates internal IRQ23 + * + * Interrupt routing on the Holly Board: + * TSI108:PB_INT[0] -> CPU0:INT# + * TSI108:PB_INT[1] -> CPU0:MCP# + * TSI108:PB_INT[2] -> N/C + * TSI108:PB_INT[3] -> N/C + */ +static void __init holly_init_IRQ(void) +{ + struct mpic *mpic; +#ifdef CONFIG_PCI + unsigned int cascade_pci_irq; + struct device_node *tsi_pci; + struct device_node *cascade_node = NULL; +#endif + + mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | + MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108, + 24, 0, + "Tsi108_PIC"); + + BUG_ON(mpic == NULL); + + mpic_assign_isu(mpic, 0, mpic->paddr + 0x100); + + mpic_init(mpic); + +#ifdef CONFIG_PCI + tsi_pci = of_find_node_by_type(NULL, "pci"); + if (tsi_pci == NULL) { + printk(KERN_ERR "%s: No tsi108 pci node found !\n", __func__); + return; + } + + cascade_node = of_find_node_by_type(NULL, "pic-router"); + if (cascade_node == NULL) { + printk(KERN_ERR "%s: No tsi108 pci cascade node found !\n", __func__); + return; + } + + cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0); + pr_debug("%s: tsi108 cascade_pci_irq = 0x%x\n", __func__, (u32) cascade_pci_irq); + tsi108_pci_int_init(cascade_node); + irq_set_handler_data(cascade_pci_irq, mpic); + irq_set_chained_handler(cascade_pci_irq, tsi108_irq_cascade); +#endif + /* Configure MPIC outputs to CPU0 */ + tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0); +} + +void holly_show_cpuinfo(struct seq_file *m) +{ + seq_printf(m, "vendor\t\t: IBM\n"); + seq_printf(m, "machine\t\t: PPC750 GX/CL\n"); +} + +void holly_restart(char *cmd) +{ + __be32 __iomem *ocn_bar1 = NULL; + unsigned long bar; + struct device_node *bridge = NULL; + const void *prop; + int size; + phys_addr_t addr = 0xc0000000; + + local_irq_disable(); + + bridge = of_find_node_by_type(NULL, "tsi-bridge"); + if (bridge) { + prop = of_get_property(bridge, "reg", &size); + addr = of_translate_address(bridge, prop); + } + addr += (TSI108_PB_OFFSET + 0x414); + + ocn_bar1 = ioremap(addr, 0x4); + + /* Turn on the BOOT bit so the addresses are correctly + * routed to the HLP interface */ + bar = ioread32be(ocn_bar1); + bar |= 2; + iowrite32be(bar, ocn_bar1); + iosync(); + + /* Set SRR0 to the reset vector and turn on MSR_IP */ + mtspr(SPRN_SRR0, 0xfff00100); + mtspr(SPRN_SRR1, MSR_IP); + + /* Do an rfi to jump back to firmware. Somewhat evil, + * but it works + */ + __asm__ __volatile__("rfi" : : : "memory"); + + /* Spin until reset happens. Shouldn't really get here */ + for (;;) ; +} + +void holly_power_off(void) +{ + local_irq_disable(); + /* No way to shut power off with software */ + for (;;) ; +} + +void holly_halt(void) +{ + holly_power_off(); +} + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init holly_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "ibm,holly")) + return 0; + return 1; +} + +static int ppc750_machine_check_exception(struct pt_regs *regs) +{ + const struct exception_table_entry *entry; + + /* Are we prepared to handle this fault */ + if ((entry = search_exception_tables(regs->nip)) != NULL) { + tsi108_clear_pci_cfg_error(); + regs->msr |= MSR_RI; + regs->nip = entry->fixup; + return 1; + } + return 0; +} + +define_machine(holly){ + .name = "PPC750 GX/CL TSI", + .probe = holly_probe, + .setup_arch = holly_setup_arch, + .init_IRQ = holly_init_IRQ, + .show_cpuinfo = holly_show_cpuinfo, + .get_irq = mpic_get_irq, + .restart = holly_restart, + .calibrate_decr = generic_calibrate_decr, + .machine_check_exception = ppc750_machine_check_exception, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c new file mode 100644 index 00000000000..455e7c08742 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/linkstation.c @@ -0,0 +1,164 @@ +/* + * Board setup routines for the Buffalo Linkstation / Kurobox Platform. + * + * Copyright (C) 2006 G. Liakhovetski (g.liakhovetski@gmx.de) + * + * Based on sandpoint.c by Mark A. Greer + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of + * any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/initrd.h> +#include <linux/of_platform.h> + +#include <asm/time.h> +#include <asm/prom.h> +#include <asm/mpic.h> +#include <asm/pci-bridge.h> + +#include "mpc10x.h" + +static __initdata struct of_device_id of_bus_ids[] = { + { .type = "soc", }, + { .compatible = "simple-bus", }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + return 0; +} +machine_device_initcall(linkstation, declare_of_platform_devices); + +static int __init linkstation_add_bridge(struct device_node *dev) +{ +#ifdef CONFIG_PCI + int len; + struct pci_controller *hose; + const int *bus_range; + + printk("Adding PCI host bridge %s\n", dev->full_name); + + bus_range = of_get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) + printk(KERN_WARNING "Can't get bus-range for %s, assume" + " bus 0\n", dev->full_name); + + hose = pcibios_alloc_controller(dev); + if (hose == NULL) + return -ENOMEM; + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + setup_indirect_pci(hose, 0xfec00000, 0xfee00000, 0); + + /* Interpret the "ranges" property */ + /* This also maps the I/O region and sets isa_io/mem_base */ + pci_process_bridge_OF_ranges(hose, dev, 1); +#endif + return 0; +} + +static void __init linkstation_setup_arch(void) +{ + struct device_node *np; + + /* Lookup PCI host bridges */ + for_each_compatible_node(np, "pci", "mpc10x-pci") + linkstation_add_bridge(np); + + printk(KERN_INFO "BUFFALO Network Attached Storage Series\n"); + printk(KERN_INFO "(C) 2002-2005 BUFFALO INC.\n"); +} + +/* + * Interrupt setup and service. Interrupts on the linkstation come + * from the four PCI slots plus onboard 8241 devices: I2C, DUART. + */ +static void __init linkstation_init_IRQ(void) +{ + struct mpic *mpic; + + mpic = mpic_alloc(NULL, 0, 0, 4, 0, " EPIC "); + BUG_ON(mpic == NULL); + + /* PCI IRQs */ + mpic_assign_isu(mpic, 0, mpic->paddr + 0x10200); + + /* I2C */ + mpic_assign_isu(mpic, 1, mpic->paddr + 0x11000); + + /* ttyS0, ttyS1 */ + mpic_assign_isu(mpic, 2, mpic->paddr + 0x11100); + + mpic_init(mpic); +} + +extern void avr_uart_configure(void); +extern void avr_uart_send(const char); + +static void linkstation_restart(char *cmd) +{ + local_irq_disable(); + + /* Reset system via AVR */ + avr_uart_configure(); + /* Send reboot command */ + avr_uart_send('C'); + + for(;;) /* Spin until reset happens */ + avr_uart_send('G'); /* "kick" */ +} + +static void linkstation_power_off(void) +{ + local_irq_disable(); + + /* Power down system via AVR */ + avr_uart_configure(); + /* send shutdown command */ + avr_uart_send('E'); + + for(;;) /* Spin until power-off happens */ + avr_uart_send('G'); /* "kick" */ + /* NOTREACHED */ +} + +static void linkstation_halt(void) +{ + linkstation_power_off(); + /* NOTREACHED */ +} + +static void linkstation_show_cpuinfo(struct seq_file *m) +{ + seq_printf(m, "vendor\t\t: Buffalo Technology\n"); + seq_printf(m, "machine\t\t: Linkstation I/Kurobox(HG)\n"); +} + +static int __init linkstation_probe(void) +{ + unsigned long root; + + root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "linkstation")) + return 0; + return 1; +} + +define_machine(linkstation){ + .name = "Buffalo Linkstation", + .probe = linkstation_probe, + .setup_arch = linkstation_setup_arch, + .init_IRQ = linkstation_init_IRQ, + .show_cpuinfo = linkstation_show_cpuinfo, + .get_irq = mpic_get_irq, + .restart = linkstation_restart, + .power_off = linkstation_power_off, + .halt = linkstation_halt, + .calibrate_decr = generic_calibrate_decr, +}; diff --git a/arch/powerpc/platforms/embedded6xx/ls_uart.c b/arch/powerpc/platforms/embedded6xx/ls_uart.c new file mode 100644 index 00000000000..9d891bd5df5 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/ls_uart.c @@ -0,0 +1,142 @@ +/* + * AVR power-management chip interface for the Buffalo Linkstation / + * Kurobox Platform. + * + * Author: 2006 (c) G. Liakhovetski + * g.liakhovetski@gmx.de + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of + * any kind, whether express or implied. + */ +#include <linux/workqueue.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/serial_reg.h> +#include <linux/serial_8250.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/termbits.h> + +#include "mpc10x.h" + +static void __iomem *avr_addr; +static unsigned long avr_clock; + +static struct work_struct wd_work; + +static void wd_stop(struct work_struct *unused) +{ + const char string[] = "AAAAFFFFJJJJ>>>>VVVV>>>>ZZZZVVVVKKKK"; + int i = 0, rescue = 8; + int len = strlen(string); + + while (rescue--) { + int j; + char lsr = in_8(avr_addr + UART_LSR); + + if (lsr & (UART_LSR_THRE | UART_LSR_TEMT)) { + for (j = 0; j < 16 && i < len; j++, i++) + out_8(avr_addr + UART_TX, string[i]); + if (i == len) { + /* Read "OK" back: 4ms for the last "KKKK" + plus a couple bytes back */ + msleep(7); + printk("linkstation: disarming the AVR watchdog: "); + while (in_8(avr_addr + UART_LSR) & UART_LSR_DR) + printk("%c", in_8(avr_addr + UART_RX)); + break; + } + } + msleep(17); + } + printk("\n"); +} + +#define AVR_QUOT(clock) ((clock) + 8 * 9600) / (16 * 9600) + +void avr_uart_configure(void) +{ + unsigned char cval = UART_LCR_WLEN8; + unsigned int quot = AVR_QUOT(avr_clock); + + if (!avr_addr || !avr_clock) + return; + + out_8(avr_addr + UART_LCR, cval); /* initialise UART */ + out_8(avr_addr + UART_MCR, 0); + out_8(avr_addr + UART_IER, 0); + + cval |= UART_LCR_STOP | UART_LCR_PARITY | UART_LCR_EPAR; + + out_8(avr_addr + UART_LCR, cval); /* Set character format */ + + out_8(avr_addr + UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */ + out_8(avr_addr + UART_DLL, quot & 0xff); /* LS of divisor */ + out_8(avr_addr + UART_DLM, quot >> 8); /* MS of divisor */ + out_8(avr_addr + UART_LCR, cval); /* reset DLAB */ + out_8(avr_addr + UART_FCR, UART_FCR_ENABLE_FIFO); /* enable FIFO */ +} + +void avr_uart_send(const char c) +{ + if (!avr_addr || !avr_clock) + return; + + out_8(avr_addr + UART_TX, c); + out_8(avr_addr + UART_TX, c); + out_8(avr_addr + UART_TX, c); + out_8(avr_addr + UART_TX, c); +} + +static void __init ls_uart_init(void) +{ + local_irq_disable(); + +#ifndef CONFIG_SERIAL_8250 + out_8(avr_addr + UART_FCR, UART_FCR_ENABLE_FIFO); /* enable FIFO */ + out_8(avr_addr + UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); /* clear FIFOs */ + out_8(avr_addr + UART_FCR, 0); + out_8(avr_addr + UART_IER, 0); + + /* Clear up interrupts */ + (void) in_8(avr_addr + UART_LSR); + (void) in_8(avr_addr + UART_RX); + (void) in_8(avr_addr + UART_IIR); + (void) in_8(avr_addr + UART_MSR); +#endif + avr_uart_configure(); + + local_irq_enable(); +} + +static int __init ls_uarts_init(void) +{ + struct device_node *avr; + phys_addr_t phys_addr; + int len; + + avr = of_find_node_by_path("/soc10x/serial@80004500"); + if (!avr) + return -EINVAL; + + avr_clock = *(u32*)of_get_property(avr, "clock-frequency", &len); + phys_addr = ((u32*)of_get_property(avr, "reg", &len))[0]; + + if (!avr_clock || !phys_addr) + return -EINVAL; + + avr_addr = ioremap(phys_addr, 32); + if (!avr_addr) + return -EFAULT; + + ls_uart_init(); + + INIT_WORK(&wd_work, wd_stop); + schedule_work(&wd_work); + + return 0; +} + +machine_late_initcall(linkstation, ls_uarts_init); diff --git a/arch/powerpc/platforms/embedded6xx/mpc10x.h b/arch/powerpc/platforms/embedded6xx/mpc10x.h new file mode 100644 index 00000000000..b290b63661f --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/mpc10x.h @@ -0,0 +1,169 @@ +/* + * Common routines for the Motorola SPS MPC106/8240/107 Host bridge/Mem + * ctlr/EPIC/etc. + * + * Author: Mark A. Greer + * mgreer@mvista.com + * + * 2001 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef __PPC_KERNEL_MPC10X_H +#define __PPC_KERNEL_MPC10X_H + +#include <linux/pci_ids.h> +#include <asm/pci-bridge.h> + +/* + * The values here don't completely map everything but should work in most + * cases. + * + * MAP A (PReP Map) + * Processor: 0x80000000 - 0x807fffff -> PCI I/O: 0x00000000 - 0x007fffff + * Processor: 0xc0000000 - 0xdfffffff -> PCI MEM: 0x00000000 - 0x1fffffff + * PCI MEM: 0x80000000 -> Processor System Memory: 0x00000000 + * EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB) + * + * MAP B (CHRP Map) + * Processor: 0xfe000000 - 0xfebfffff -> PCI I/O: 0x00000000 - 0x00bfffff + * Processor: 0x80000000 - 0xbfffffff -> PCI MEM: 0x80000000 - 0xbfffffff + * PCI MEM: 0x00000000 -> Processor System Memory: 0x00000000 + * EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB) + */ + +/* + * Define the vendor/device IDs for the various bridges--should be added to + * <linux/pci_ids.h> + */ +#define MPC10X_BRIDGE_106 ((PCI_DEVICE_ID_MOTOROLA_MPC106 << 16) | \ + PCI_VENDOR_ID_MOTOROLA) +#define MPC10X_BRIDGE_8240 ((0x0003 << 16) | PCI_VENDOR_ID_MOTOROLA) +#define MPC10X_BRIDGE_107 ((0x0004 << 16) | PCI_VENDOR_ID_MOTOROLA) +#define MPC10X_BRIDGE_8245 ((0x0006 << 16) | PCI_VENDOR_ID_MOTOROLA) + +/* Define the type of map to use */ +#define MPC10X_MEM_MAP_A 1 +#define MPC10X_MEM_MAP_B 2 + +/* Map A (PReP Map) Defines */ +#define MPC10X_MAPA_CNFG_ADDR 0x80000cf8 +#define MPC10X_MAPA_CNFG_DATA 0x80000cfc + +#define MPC10X_MAPA_ISA_IO_BASE 0x80000000 +#define MPC10X_MAPA_ISA_MEM_BASE 0xc0000000 +#define MPC10X_MAPA_DRAM_OFFSET 0x80000000 + +#define MPC10X_MAPA_PCI_INTACK_ADDR 0xbffffff0 +#define MPC10X_MAPA_PCI_IO_START 0x00000000 +#define MPC10X_MAPA_PCI_IO_END (0x00800000 - 1) +#define MPC10X_MAPA_PCI_MEM_START 0x00000000 +#define MPC10X_MAPA_PCI_MEM_END (0x20000000 - 1) + +#define MPC10X_MAPA_PCI_MEM_OFFSET (MPC10X_MAPA_ISA_MEM_BASE - \ + MPC10X_MAPA_PCI_MEM_START) + +/* Map B (CHRP Map) Defines */ +#define MPC10X_MAPB_CNFG_ADDR 0xfec00000 +#define MPC10X_MAPB_CNFG_DATA 0xfee00000 + +#define MPC10X_MAPB_ISA_IO_BASE 0xfe000000 +#define MPC10X_MAPB_ISA_MEM_BASE 0x80000000 +#define MPC10X_MAPB_DRAM_OFFSET 0x00000000 + +#define MPC10X_MAPB_PCI_INTACK_ADDR 0xfef00000 +#define MPC10X_MAPB_PCI_IO_START 0x00000000 +#define MPC10X_MAPB_PCI_IO_END (0x00c00000 - 1) +#define MPC10X_MAPB_PCI_MEM_START 0x80000000 +#define MPC10X_MAPB_PCI_MEM_END (0xc0000000 - 1) + +#define MPC10X_MAPB_PCI_MEM_OFFSET (MPC10X_MAPB_ISA_MEM_BASE - \ + MPC10X_MAPB_PCI_MEM_START) + +/* Miscellaneous Configuration register offsets */ +#define MPC10X_CFG_PIR_REG 0x09 +#define MPC10X_CFG_PIR_HOST_BRIDGE 0x00 +#define MPC10X_CFG_PIR_AGENT 0x01 + +#define MPC10X_CFG_EUMBBAR 0x78 + +#define MPC10X_CFG_PICR1_REG 0xa8 +#define MPC10X_CFG_PICR1_ADDR_MAP_MASK 0x00010000 +#define MPC10X_CFG_PICR1_ADDR_MAP_A 0x00010000 +#define MPC10X_CFG_PICR1_ADDR_MAP_B 0x00000000 +#define MPC10X_CFG_PICR1_SPEC_PCI_RD 0x00000004 +#define MPC10X_CFG_PICR1_ST_GATH_EN 0x00000040 + +#define MPC10X_CFG_PICR2_REG 0xac +#define MPC10X_CFG_PICR2_COPYBACK_OPT 0x00000001 + +#define MPC10X_CFG_MAPB_OPTIONS_REG 0xe0 +#define MPC10X_CFG_MAPB_OPTIONS_CFAE 0x80 /* CPU_FD_ALIAS_EN */ +#define MPC10X_CFG_MAPB_OPTIONS_PFAE 0x40 /* PCI_FD_ALIAS_EN */ +#define MPC10X_CFG_MAPB_OPTIONS_DR 0x20 /* DLL_RESET */ +#define MPC10X_CFG_MAPB_OPTIONS_PCICH 0x08 /* PCI_COMPATIBILITY_HOLE */ +#define MPC10X_CFG_MAPB_OPTIONS_PROCCH 0x04 /* PROC_COMPATIBILITY_HOLE */ + +/* Define offsets for the memory controller registers in the config space */ +#define MPC10X_MCTLR_MEM_START_1 0x80 /* Banks 0-3 */ +#define MPC10X_MCTLR_MEM_START_2 0x84 /* Banks 4-7 */ +#define MPC10X_MCTLR_EXT_MEM_START_1 0x88 /* Banks 0-3 */ +#define MPC10X_MCTLR_EXT_MEM_START_2 0x8c /* Banks 4-7 */ + +#define MPC10X_MCTLR_MEM_END_1 0x90 /* Banks 0-3 */ +#define MPC10X_MCTLR_MEM_END_2 0x94 /* Banks 4-7 */ +#define MPC10X_MCTLR_EXT_MEM_END_1 0x98 /* Banks 0-3 */ +#define MPC10X_MCTLR_EXT_MEM_END_2 0x9c /* Banks 4-7 */ + +#define MPC10X_MCTLR_MEM_BANK_ENABLES 0xa0 + +/* Define some offset in the EUMB */ +#define MPC10X_EUMB_SIZE 0x00100000 /* Total EUMB size (1MB) */ + +#define MPC10X_EUMB_MU_OFFSET 0x00000000 /* Msg Unit reg offset */ +#define MPC10X_EUMB_MU_SIZE 0x00001000 /* Msg Unit reg size */ +#define MPC10X_EUMB_DMA_OFFSET 0x00001000 /* DMA Unit reg offset */ +#define MPC10X_EUMB_DMA_SIZE 0x00001000 /* DMA Unit reg size */ +#define MPC10X_EUMB_ATU_OFFSET 0x00002000 /* Addr xlate reg offset */ +#define MPC10X_EUMB_ATU_SIZE 0x00001000 /* Addr xlate reg size */ +#define MPC10X_EUMB_I2C_OFFSET 0x00003000 /* I2C Unit reg offset */ +#define MPC10X_EUMB_I2C_SIZE 0x00001000 /* I2C Unit reg size */ +#define MPC10X_EUMB_DUART_OFFSET 0x00004000 /* DUART Unit reg offset (8245) */ +#define MPC10X_EUMB_DUART_SIZE 0x00001000 /* DUART Unit reg size (8245) */ +#define MPC10X_EUMB_EPIC_OFFSET 0x00040000 /* EPIC offset in EUMB */ +#define MPC10X_EUMB_EPIC_SIZE 0x00030000 /* EPIC size */ +#define MPC10X_EUMB_PM_OFFSET 0x000fe000 /* Performance Monitor reg offset (8245) */ +#define MPC10X_EUMB_PM_SIZE 0x00001000 /* Performance Monitor reg size (8245) */ +#define MPC10X_EUMB_WP_OFFSET 0x000ff000 /* Data path diagnostic, watchpoint reg offset */ +#define MPC10X_EUMB_WP_SIZE 0x00001000 /* Data path diagnostic, watchpoint reg size */ + +/* + * Define some recommended places to put the EUMB regs. + * For both maps, recommend putting the EUMB from 0xeff00000 to 0xefffffff. + */ +extern unsigned long ioremap_base; +#define MPC10X_MAPA_EUMB_BASE (ioremap_base - MPC10X_EUMB_SIZE) +#define MPC10X_MAPB_EUMB_BASE MPC10X_MAPA_EUMB_BASE + +enum ppc_sys_devices { + MPC10X_IIC1, + MPC10X_DMA0, + MPC10X_DMA1, + MPC10X_UART0, + MPC10X_UART1, + NUM_PPC_SYS_DEVS, +}; + +int mpc10x_bridge_init(struct pci_controller *hose, + uint current_map, + uint new_map, + uint phys_eumb_base); +unsigned long mpc10x_get_mem_size(uint mem_map); +int mpc10x_enable_store_gathering(struct pci_controller *hose); +int mpc10x_disable_store_gathering(struct pci_controller *hose); + +/* For MPC107 boards that use the built-in openpic */ +void mpc10x_set_openpic(void); + +#endif /* __PPC_KERNEL_MPC10X_H */ diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c index e4f2b9df5e1..beeaf4a173e 100644 --- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c +++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c @@ -18,22 +18,20 @@ * 2 of the License, or (at your option) any later version. */ -#include <linux/config.h> #include <linux/stddef.h> #include <linux/kernel.h> #include <linux/pci.h> #include <linux/kdev_t.h> #include <linux/console.h> +#include <linux/module.h> #include <linux/delay.h> #include <linux/irq.h> -#include <linux/ide.h> #include <linux/seq_file.h> #include <linux/root_dev.h> #include <linux/serial.h> #include <linux/tty.h> #include <linux/serial_core.h> -#include <asm/system.h> #include <asm/time.h> #include <asm/machdep.h> #include <asm/prom.h> @@ -42,7 +40,7 @@ #include <asm/pci-bridge.h> #include <asm/reg.h> #include <mm/mmu_decl.h> -#include "mpc7448_hpc2.h" +#include <asm/tsi108_pci.h> #include <asm/tsi108_irq.h> #include <asm/mpic.h> @@ -53,19 +51,10 @@ #define DBG(fmt...) do { } while(0) #endif -#ifndef CONFIG_PCI -isa_io_base = MPC7448_HPC2_ISA_IO_BASE; -isa_mem_base = MPC7448_HPC2_ISA_MEM_BASE; -pci_dram_offset = MPC7448_HPC2_PCI_MEM_OFFSET; -#endif - -extern int tsi108_setup_pci(struct device_node *dev); -extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val); -extern void tsi108_pci_int_init(void); -extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc, - struct pt_regs *regs); +#define MPC7448HPC2_PCI_CFG_PHYS 0xfb000000 -int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn) +int mpc7448_hpc2_exclude_device(struct pci_controller *hose, + u_char bus, u_char devfn) { if (bus == 0 && PCI_SLOT(devfn) == 0) return PCIBIOS_DEVICE_NOT_FOUND; @@ -73,99 +62,18 @@ int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn) return PCIBIOS_SUCCESSFUL; } -/* - * find pci slot by devfn in interrupt map of OF tree - */ -u8 find_slot_by_devfn(unsigned int *interrupt_map, unsigned int devfn) -{ - int i; - unsigned int tmp; - for (i = 0; i < 4; i++){ - tmp = interrupt_map[i*4*7]; - if ((tmp >> 11) == (devfn >> 3)) - return i; - } - return i; -} - -/* - * Scans the interrupt map for pci device - */ -void mpc7448_hpc2_fixup_irq(struct pci_dev *dev) -{ - struct pci_controller *hose; - struct device_node *node; - const unsigned int *interrupt; - int busnr; - int len; - u8 slot; - u8 pin; - - /* Lookup the hose */ - busnr = dev->bus->number; - hose = pci_bus_to_hose(busnr); - if (!hose) - printk(KERN_ERR "No pci hose found\n"); - - /* Check it has an OF node associated */ - node = (struct device_node *) hose->arch_data; - if (!node) - printk(KERN_ERR "No pci node found\n"); - - interrupt = get_property(node, "interrupt-map", &len); - slot = find_slot_by_devfn(interrupt, dev->devfn); - pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); - if (pin == 0 || pin > 4) - pin = 1; - pin--; - dev->irq = interrupt[slot*4*7 + pin*7 + 5]; - DBG("TSI_PCI: dev->irq = 0x%x\n", dev->irq); -} -/* temporary pci irq map fixup*/ - -void __init mpc7448_hpc2_pcibios_fixup(void) -{ - struct pci_dev *dev = NULL; - for_each_pci_dev(dev) { - mpc7448_hpc2_fixup_irq(dev); - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); - } -} - static void __init mpc7448_hpc2_setup_arch(void) { - struct device_node *cpu; struct device_node *np; if (ppc_md.progress) ppc_md.progress("mpc7448_hpc2_setup_arch():set_bridge", 0); - cpu = of_find_node_by_type(NULL, "cpu"); - if (cpu != 0) { - const unsigned int *fp; - - fp = get_property(cpu, "clock-frequency", NULL); - if (fp != 0) - loops_per_jiffy = *fp / HZ; - else - loops_per_jiffy = 50000000 / HZ; - of_node_put(cpu); - } tsi108_csr_vir_base = get_vir_csrbase(); -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif - -#ifdef CONFIG_BLK_DEV_INITRD - ROOT_DEV = Root_RAM0; -#endif - /* setup PCI host bridge */ #ifdef CONFIG_PCI - for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) - tsi108_setup_pci(np); + for_each_compatible_node(np, "pci", "tsi108-pci") + tsi108_setup_pci(np, MPC7448HPC2_PCI_CFG_PHYS, 0); ppc_md.pci_exclude_device = mpc7448_hpc2_exclude_device; if (ppc_md.progress) @@ -180,7 +88,7 @@ static void __init mpc7448_hpc2_setup_arch(void) } /* - * Interrupt setup and service. Interrrupts on the mpc7448_hpc2 come + * Interrupt setup and service. Interrupts on the mpc7448_hpc2 come * from the four external INT pins, PCI interrupts are routed via * PCI interrupt control registers, it generates internal IRQ23 * @@ -193,57 +101,49 @@ static void __init mpc7448_hpc2_setup_arch(void) static void __init mpc7448_hpc2_init_IRQ(void) { struct mpic *mpic; - phys_addr_t mpic_paddr = 0; +#ifdef CONFIG_PCI unsigned int cascade_pci_irq; struct device_node *tsi_pci; - struct device_node *tsi_pic; - - tsi_pic = of_find_node_by_type(NULL, "open-pic"); - if (tsi_pic) { - unsigned int size; - void *prop = get_property(tsi_pic, "reg", &size); - mpic_paddr = of_translate_address(tsi_pic, prop); - } - - if (mpic_paddr == 0) { - printk("%s: No tsi108 PIC found !\n", __FUNCTION__); - return; - } - - DBG("%s: tsi108pic phys_addr = 0x%x\n", __FUNCTION__, - (u32) mpic_paddr); + struct device_node *cascade_node = NULL; +#endif - mpic = mpic_alloc(tsi_pic, mpic_paddr, - MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET | + mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108, - 0, /* num_sources used */ - 0, /* num_sources used */ + 24, 0, "Tsi108_PIC"); - BUG_ON(mpic == NULL); /* XXXX */ + BUG_ON(mpic == NULL); + + mpic_assign_isu(mpic, 0, mpic->paddr + 0x100); + mpic_init(mpic); +#ifdef CONFIG_PCI tsi_pci = of_find_node_by_type(NULL, "pci"); - if (tsi_pci == 0) { - printk("%s: No tsi108 pci node found !\n", __FUNCTION__); + if (tsi_pci == NULL) { + printk("%s: No tsi108 pci node found !\n", __func__); + return; + } + cascade_node = of_find_node_by_type(NULL, "pic-router"); + if (cascade_node == NULL) { + printk("%s: No tsi108 pci cascade node found !\n", __func__); return; } cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0); - set_irq_data(cascade_pci_irq, mpic); - set_irq_chained_handler(cascade_pci_irq, tsi108_irq_cascade); - - tsi108_pci_int_init(); - + DBG("%s: tsi108 cascade_pci_irq = 0x%x\n", __func__, + (u32) cascade_pci_irq); + tsi108_pci_int_init(cascade_node); + irq_set_handler_data(cascade_pci_irq, mpic); + irq_set_chained_handler(cascade_pci_irq, tsi108_irq_cascade); +#endif /* Configure MPIC outputs to CPU0 */ tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0); - of_node_put(tsi_pic); } void mpc7448_hpc2_show_cpuinfo(struct seq_file *m) { seq_printf(m, "vendor\t\t: Freescale Semiconductor\n"); - seq_printf(m, "machine\t\t: MPC7448hpc2\n"); } void mpc7448_hpc2_restart(char *cmd) @@ -281,7 +181,6 @@ static int __init mpc7448_hpc2_probe(void) static int mpc7448_machine_check_exception(struct pt_regs *regs) { - extern void tsi108_clear_pci_cfg_error(void); const struct exception_table_entry *entry; /* Are we prepared to handle this fault */ @@ -292,7 +191,6 @@ static int mpc7448_machine_check_exception(struct pt_regs *regs) return 1; } return 0; - } define_machine(mpc7448_hpc2){ @@ -302,7 +200,6 @@ define_machine(mpc7448_hpc2){ .init_IRQ = mpc7448_hpc2_init_IRQ, .show_cpuinfo = mpc7448_hpc2_show_cpuinfo, .get_irq = mpic_get_irq, - .pcibios_fixup = mpc7448_hpc2_pcibios_fixup, .restart = mpc7448_hpc2_restart, .calibrate_decr = generic_calibrate_decr, .machine_check_exception= mpc7448_machine_check_exception, diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.h b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.h deleted file mode 100644 index a543a5242e3..00000000000 --- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * mpc7448_hpc2.h - * - * Definitions for Freescale MPC7448_HPC2 platform - * - * Author: Jacob Pan - * jacob.pan@freescale.com - * Maintainer: Roy Zang <roy.zang@freescale.com> - * - * 2006 (c) Freescale Semiconductor, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __PPC_PLATFORMS_MPC7448_HPC2_H -#define __PPC_PLATFORMS_MPC7448_HPC2_H - -#include <asm/ppcboot.h> - -/* Base Addresses for the PCI bus - */ -#define MPC7448_HPC2_PCI_MEM_OFFSET (0x00000000) -#define MPC7448_HPC2_ISA_IO_BASE (0x00000000) -#define MPC7448_HPC2_ISA_MEM_BASE (0x00000000) -#endif /* __PPC_PLATFORMS_MPC7448_HPC2_H */ diff --git a/arch/powerpc/platforms/embedded6xx/mvme5100.c b/arch/powerpc/platforms/embedded6xx/mvme5100.c new file mode 100644 index 00000000000..25e3bfb64ef --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/mvme5100.c @@ -0,0 +1,221 @@ +/* + * Board setup routines for the Motorola/Emerson MVME5100. + * + * Copyright 2013 CSC Australia Pty. Ltd. + * + * Based on earlier code by: + * + * Matt Porter, MontaVista Software Inc. + * Copyright 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Author: Stephen Chivers <schivers@csc.com> + * + */ + +#include <linux/of_platform.h> + +#include <asm/i8259.h> +#include <asm/pci-bridge.h> +#include <asm/mpic.h> +#include <asm/prom.h> +#include <mm/mmu_decl.h> +#include <asm/udbg.h> + +#define HAWK_MPIC_SIZE 0x00040000U +#define MVME5100_PCI_MEM_OFFSET 0x00000000 + +/* Board register addresses. */ +#define BOARD_STATUS_REG 0xfef88080 +#define BOARD_MODFAIL_REG 0xfef88090 +#define BOARD_MODRST_REG 0xfef880a0 +#define BOARD_TBEN_REG 0xfef880c0 +#define BOARD_SW_READ_REG 0xfef880e0 +#define BOARD_GEO_ADDR_REG 0xfef880e8 +#define BOARD_EXT_FEATURE1_REG 0xfef880f0 +#define BOARD_EXT_FEATURE2_REG 0xfef88100 + +static phys_addr_t pci_membase; +static u_char *restart; + +static void mvme5100_8259_cascade(unsigned int irq, struct irq_desc *desc) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + unsigned int cascade_irq = i8259_irq(); + + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq); + + chip->irq_eoi(&desc->irq_data); +} + +static void __init mvme5100_pic_init(void) +{ + struct mpic *mpic; + struct device_node *np; + struct device_node *cp = NULL; + unsigned int cirq; + unsigned long intack = 0; + const u32 *prop = NULL; + + np = of_find_node_by_type(NULL, "open-pic"); + if (!np) { + pr_err("Could not find open-pic node\n"); + return; + } + + mpic = mpic_alloc(np, pci_membase, 0, 16, 256, " OpenPIC "); + + BUG_ON(mpic == NULL); + of_node_put(np); + + mpic_assign_isu(mpic, 0, pci_membase + 0x10000); + + mpic_init(mpic); + + cp = of_find_compatible_node(NULL, NULL, "chrp,iic"); + if (cp == NULL) { + pr_warn("mvme5100_pic_init: couldn't find i8259\n"); + return; + } + + cirq = irq_of_parse_and_map(cp, 0); + if (cirq == NO_IRQ) { + pr_warn("mvme5100_pic_init: no cascade interrupt?\n"); + return; + } + + np = of_find_compatible_node(NULL, "pci", "mpc10x-pci"); + if (np) { + prop = of_get_property(np, "8259-interrupt-acknowledge", NULL); + + if (prop) + intack = prop[0]; + + of_node_put(np); + } + + if (intack) + pr_debug("mvme5100_pic_init: PCI 8259 intack at 0x%016lx\n", + intack); + + i8259_init(cp, intack); + of_node_put(cp); + irq_set_chained_handler(cirq, mvme5100_8259_cascade); +} + +static int __init mvme5100_add_bridge(struct device_node *dev) +{ + const int *bus_range; + int len; + struct pci_controller *hose; + unsigned short devid; + + pr_info("Adding PCI host bridge %s\n", dev->full_name); + + bus_range = of_get_property(dev, "bus-range", &len); + + hose = pcibios_alloc_controller(dev); + if (hose == NULL) + return -ENOMEM; + + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + + setup_indirect_pci(hose, 0xfe000cf8, 0xfe000cfc, 0); + + pci_process_bridge_OF_ranges(hose, dev, 1); + + early_read_config_word(hose, 0, 0, PCI_DEVICE_ID, &devid); + + if (devid != PCI_DEVICE_ID_MOTOROLA_HAWK) { + pr_err("HAWK PHB not present?\n"); + return 0; + } + + early_read_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_1, &pci_membase); + + if (pci_membase == 0) { + pr_err("HAWK PHB mibar not correctly set?\n"); + return 0; + } + + pr_info("mvme5100_pic_init: pci_membase: %x\n", pci_membase); + + return 0; +} + +static struct of_device_id mvme5100_of_bus_ids[] __initdata = { + { .compatible = "hawk-bridge", }, + {}, +}; + +/* + * Setup the architecture + */ +static void __init mvme5100_setup_arch(void) +{ + struct device_node *np; + + if (ppc_md.progress) + ppc_md.progress("mvme5100_setup_arch()", 0); + + for_each_compatible_node(np, "pci", "hawk-pci") + mvme5100_add_bridge(np); + + restart = ioremap(BOARD_MODRST_REG, 4); +} + + +static void mvme5100_show_cpuinfo(struct seq_file *m) +{ + seq_puts(m, "Vendor\t\t: Motorola/Emerson\n"); + seq_puts(m, "Machine\t\t: MVME5100\n"); +} + +static void mvme5100_restart(char *cmd) +{ + + local_irq_disable(); + mtmsr(mfmsr() | MSR_IP); + + out_8((u_char *) restart, 0x01); + + while (1) + ; +} + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init mvme5100_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "MVME5100"); +} + +static int __init probe_of_platform_devices(void) +{ + + of_platform_bus_probe(NULL, mvme5100_of_bus_ids, NULL); + return 0; +} + +machine_device_initcall(mvme5100, probe_of_platform_devices); + +define_machine(mvme5100) { + .name = "MVME5100", + .probe = mvme5100_probe, + .setup_arch = mvme5100_setup_arch, + .init_IRQ = mvme5100_pic_init, + .show_cpuinfo = mvme5100_show_cpuinfo, + .get_irq = mpic_get_irq, + .restart = mvme5100_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/embedded6xx/storcenter.c b/arch/powerpc/platforms/embedded6xx/storcenter.c new file mode 100644 index 00000000000..c458b60d14c --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/storcenter.c @@ -0,0 +1,125 @@ +/* + * Board setup routines for the storcenter + * + * Copyright 2007 (C) Oyvind Repvik (nail@nslu2-linux.org) + * Copyright 2007 Andy Wilcox, Jon Loeliger + * + * Based on linkstation.c by G. Liakhovetski + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of + * any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/initrd.h> +#include <linux/of_platform.h> + +#include <asm/time.h> +#include <asm/prom.h> +#include <asm/mpic.h> +#include <asm/pci-bridge.h> + +#include "mpc10x.h" + + +static __initdata struct of_device_id storcenter_of_bus[] = { + { .name = "soc", }, + {}, +}; + +static int __init storcenter_device_probe(void) +{ + of_platform_bus_probe(NULL, storcenter_of_bus, NULL); + return 0; +} +machine_device_initcall(storcenter, storcenter_device_probe); + + +static int __init storcenter_add_bridge(struct device_node *dev) +{ +#ifdef CONFIG_PCI + int len; + struct pci_controller *hose; + const int *bus_range; + + printk("Adding PCI host bridge %s\n", dev->full_name); + + hose = pcibios_alloc_controller(dev); + if (hose == NULL) + return -ENOMEM; + + bus_range = of_get_property(dev, "bus-range", &len); + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + + setup_indirect_pci(hose, MPC10X_MAPB_CNFG_ADDR, MPC10X_MAPB_CNFG_DATA, 0); + + /* Interpret the "ranges" property */ + /* This also maps the I/O region and sets isa_io/mem_base */ + pci_process_bridge_OF_ranges(hose, dev, 1); +#endif + + return 0; +} + +static void __init storcenter_setup_arch(void) +{ + struct device_node *np; + + /* Lookup PCI host bridges */ + for_each_compatible_node(np, "pci", "mpc10x-pci") + storcenter_add_bridge(np); + + printk(KERN_INFO "IOMEGA StorCenter\n"); +} + +/* + * Interrupt setup and service. Interrupts on the turbostation come + * from the four PCI slots plus onboard 8241 devices: I2C, DUART. + */ +static void __init storcenter_init_IRQ(void) +{ + struct mpic *mpic; + + mpic = mpic_alloc(NULL, 0, 0, 16, 0, " OpenPIC "); + BUG_ON(mpic == NULL); + + /* + * 16 Serial Interrupts followed by 16 Internal Interrupts. + * I2C is the second internal, so it is at 17, 0x11020. + */ + mpic_assign_isu(mpic, 0, mpic->paddr + 0x10200); + mpic_assign_isu(mpic, 1, mpic->paddr + 0x11000); + + mpic_init(mpic); +} + +static void storcenter_restart(char *cmd) +{ + local_irq_disable(); + + /* Set exception prefix high - to the firmware */ + _nmask_and_or_msr(0, MSR_IP); + + /* Wait for reset to happen */ + for (;;) ; +} + +static int __init storcenter_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "iomega,storcenter"); +} + +define_machine(storcenter){ + .name = "IOMEGA StorCenter", + .probe = storcenter_probe, + .setup_arch = storcenter_setup_arch, + .init_IRQ = storcenter_init_IRQ, + .get_irq = mpic_get_irq, + .restart = storcenter_restart, + .calibrate_decr = generic_calibrate_decr, +}; diff --git a/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c b/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c new file mode 100644 index 00000000000..20a8ed91962 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c @@ -0,0 +1,328 @@ +/* + * arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c + * + * udbg serial input/output routines for the USB Gecko adapter. + * Copyright (C) 2008-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#include <mm/mmu_decl.h> + +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/fixmap.h> + +#include "usbgecko_udbg.h" + + +#define EXI_CLK_32MHZ 5 + +#define EXI_CSR 0x00 +#define EXI_CSR_CLKMASK (0x7<<4) +#define EXI_CSR_CLK_32MHZ (EXI_CLK_32MHZ<<4) +#define EXI_CSR_CSMASK (0x7<<7) +#define EXI_CSR_CS_0 (0x1<<7) /* Chip Select 001 */ + +#define EXI_CR 0x0c +#define EXI_CR_TSTART (1<<0) +#define EXI_CR_WRITE (1<<2) +#define EXI_CR_READ_WRITE (2<<2) +#define EXI_CR_TLEN(len) (((len)-1)<<4) + +#define EXI_DATA 0x10 + +#define UG_READ_ATTEMPTS 100 +#define UG_WRITE_ATTEMPTS 100 + + +static void __iomem *ug_io_base; + +/* + * Performs one input/output transaction between the exi host and the usbgecko. + */ +static u32 ug_io_transaction(u32 in) +{ + u32 __iomem *csr_reg = ug_io_base + EXI_CSR; + u32 __iomem *data_reg = ug_io_base + EXI_DATA; + u32 __iomem *cr_reg = ug_io_base + EXI_CR; + u32 csr, data, cr; + + /* select */ + csr = EXI_CSR_CLK_32MHZ | EXI_CSR_CS_0; + out_be32(csr_reg, csr); + + /* read/write */ + data = in; + out_be32(data_reg, data); + cr = EXI_CR_TLEN(2) | EXI_CR_READ_WRITE | EXI_CR_TSTART; + out_be32(cr_reg, cr); + + while (in_be32(cr_reg) & EXI_CR_TSTART) + barrier(); + + /* deselect */ + out_be32(csr_reg, 0); + + /* result */ + data = in_be32(data_reg); + + return data; +} + +/* + * Returns true if an usbgecko adapter is found. + */ +static int ug_is_adapter_present(void) +{ + if (!ug_io_base) + return 0; + + return ug_io_transaction(0x90000000) == 0x04700000; +} + +/* + * Returns true if the TX fifo is ready for transmission. + */ +static int ug_is_txfifo_ready(void) +{ + return ug_io_transaction(0xc0000000) & 0x04000000; +} + +/* + * Tries to transmit a character. + * If the TX fifo is not ready the result is undefined. + */ +static void ug_raw_putc(char ch) +{ + ug_io_transaction(0xb0000000 | (ch << 20)); +} + +/* + * Transmits a character. + * It silently fails if the TX fifo is not ready after a number of retries. + */ +static void ug_putc(char ch) +{ + int count = UG_WRITE_ATTEMPTS; + + if (!ug_io_base) + return; + + if (ch == '\n') + ug_putc('\r'); + + while (!ug_is_txfifo_ready() && count--) + barrier(); + if (count >= 0) + ug_raw_putc(ch); +} + +/* + * Returns true if the RX fifo is ready for transmission. + */ +static int ug_is_rxfifo_ready(void) +{ + return ug_io_transaction(0xd0000000) & 0x04000000; +} + +/* + * Tries to receive a character. + * If a character is unavailable the function returns -1. + */ +static int ug_raw_getc(void) +{ + u32 data = ug_io_transaction(0xa0000000); + if (data & 0x08000000) + return (data >> 16) & 0xff; + else + return -1; +} + +/* + * Receives a character. + * It fails if the RX fifo is not ready after a number of retries. + */ +static int ug_getc(void) +{ + int count = UG_READ_ATTEMPTS; + + if (!ug_io_base) + return -1; + + while (!ug_is_rxfifo_ready() && count--) + barrier(); + return ug_raw_getc(); +} + +/* + * udbg functions. + * + */ + +/* + * Transmits a character. + */ +void ug_udbg_putc(char ch) +{ + ug_putc(ch); +} + +/* + * Receives a character. Waits until a character is available. + */ +static int ug_udbg_getc(void) +{ + int ch; + + while ((ch = ug_getc()) == -1) + barrier(); + return ch; +} + +/* + * Receives a character. If a character is not available, returns -1. + */ +static int ug_udbg_getc_poll(void) +{ + if (!ug_is_rxfifo_ready()) + return -1; + return ug_getc(); +} + +/* + * Retrieves and prepares the virtual address needed to access the hardware. + */ +static void __iomem *ug_udbg_setup_exi_io_base(struct device_node *np) +{ + void __iomem *exi_io_base = NULL; + phys_addr_t paddr; + const unsigned int *reg; + + reg = of_get_property(np, "reg", NULL); + if (reg) { + paddr = of_translate_address(np, reg); + if (paddr) + exi_io_base = ioremap(paddr, reg[1]); + } + return exi_io_base; +} + +/* + * Checks if a USB Gecko adapter is inserted in any memory card slot. + */ +static void __iomem *ug_udbg_probe(void __iomem *exi_io_base) +{ + int i; + + /* look for a usbgecko on memcard slots A and B */ + for (i = 0; i < 2; i++) { + ug_io_base = exi_io_base + 0x14 * i; + if (ug_is_adapter_present()) + break; + } + if (i == 2) + ug_io_base = NULL; + return ug_io_base; + +} + +/* + * USB Gecko udbg support initialization. + */ +void __init ug_udbg_init(void) +{ + struct device_node *np; + void __iomem *exi_io_base; + + if (ug_io_base) + udbg_printf("%s: early -> final\n", __func__); + + np = of_find_compatible_node(NULL, NULL, "nintendo,flipper-exi"); + if (!np) { + udbg_printf("%s: EXI node not found\n", __func__); + goto done; + } + + exi_io_base = ug_udbg_setup_exi_io_base(np); + if (!exi_io_base) { + udbg_printf("%s: failed to setup EXI io base\n", __func__); + goto done; + } + + if (!ug_udbg_probe(exi_io_base)) { + udbg_printf("usbgecko_udbg: not found\n"); + iounmap(exi_io_base); + } else { + udbg_putc = ug_udbg_putc; + udbg_getc = ug_udbg_getc; + udbg_getc_poll = ug_udbg_getc_poll; + udbg_printf("usbgecko_udbg: ready\n"); + } + +done: + if (np) + of_node_put(np); + return; +} + +#ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO + +static phys_addr_t __init ug_early_grab_io_addr(void) +{ +#if defined(CONFIG_GAMECUBE) + return 0x0c000000; +#elif defined(CONFIG_WII) + return 0x0d000000; +#else +#error Invalid platform for USB Gecko based early debugging. +#endif +} + +/* + * USB Gecko early debug support initialization for udbg. + */ +void __init udbg_init_usbgecko(void) +{ + void __iomem *early_debug_area; + void __iomem *exi_io_base; + + /* + * At this point we have a BAT already setup that enables I/O + * to the EXI hardware. + * + * The BAT uses a virtual address range reserved at the fixmap. + * This must match the virtual address configured in + * head_32.S:setup_usbgecko_bat(). + */ + early_debug_area = (void __iomem *)__fix_to_virt(FIX_EARLY_DEBUG_BASE); + exi_io_base = early_debug_area + 0x00006800; + + /* try to detect a USB Gecko */ + if (!ug_udbg_probe(exi_io_base)) + return; + + /* we found a USB Gecko, load udbg hooks */ + udbg_putc = ug_udbg_putc; + udbg_getc = ug_udbg_getc; + udbg_getc_poll = ug_udbg_getc_poll; + + /* + * Prepare again the same BAT for MMU_init. + * This allows udbg I/O to continue working after the MMU is + * turned on for real. + * It is safe to continue using the same virtual address as it is + * a reserved fixmap area. + */ + setbat(1, (unsigned long)early_debug_area, + ug_early_grab_io_addr(), 128*1024, PAGE_KERNEL_NCG); +} + +#endif /* CONFIG_PPC_EARLY_DEBUG_USBGECKO */ + diff --git a/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h b/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h new file mode 100644 index 00000000000..bb6cde4ad76 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h @@ -0,0 +1,32 @@ +/* + * arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h + * + * udbg serial input/output routines for the USB Gecko adapter. + * Copyright (C) 2008-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +#ifndef __USBGECKO_UDBG_H +#define __USBGECKO_UDBG_H + +#ifdef CONFIG_USBGECKO_UDBG + +extern void __init ug_udbg_init(void); + +#else + +static inline void __init ug_udbg_init(void) +{ +} + +#endif /* CONFIG_USBGECKO_UDBG */ + +void __init udbg_init_usbgecko(void); + +#endif /* __USBGECKO_UDBG_H */ diff --git a/arch/powerpc/platforms/embedded6xx/wii.c b/arch/powerpc/platforms/embedded6xx/wii.c new file mode 100644 index 00000000000..6d8dadf19f0 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/wii.c @@ -0,0 +1,252 @@ +/* + * arch/powerpc/platforms/embedded6xx/wii.c + * + * Nintendo Wii board-specific support + * Copyright (C) 2008-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ +#define DRV_MODULE_NAME "wii" +#define pr_fmt(fmt) DRV_MODULE_NAME ": " fmt + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/seq_file.h> +#include <linux/of_platform.h> +#include <linux/memblock.h> +#include <mm/mmu_decl.h> + +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/time.h> +#include <asm/udbg.h> + +#include "flipper-pic.h" +#include "hlwd-pic.h" +#include "usbgecko_udbg.h" + +/* control block */ +#define HW_CTRL_COMPATIBLE "nintendo,hollywood-control" + +#define HW_CTRL_RESETS 0x94 +#define HW_CTRL_RESETS_SYS (1<<0) + +/* gpio */ +#define HW_GPIO_COMPATIBLE "nintendo,hollywood-gpio" + +#define HW_GPIO_BASE(idx) (idx * 0x20) +#define HW_GPIO_OUT(idx) (HW_GPIO_BASE(idx) + 0) +#define HW_GPIO_DIR(idx) (HW_GPIO_BASE(idx) + 4) + +#define HW_GPIO_SHUTDOWN (1<<1) +#define HW_GPIO_SLOT_LED (1<<5) +#define HW_GPIO_SENSOR_BAR (1<<8) + + +static void __iomem *hw_ctrl; +static void __iomem *hw_gpio; + +unsigned long wii_hole_start; +unsigned long wii_hole_size; + + +static int __init page_aligned(unsigned long x) +{ + return !(x & (PAGE_SIZE-1)); +} + +void __init wii_memory_fixups(void) +{ + struct memblock_region *p = memblock.memory.regions; + + /* + * This is part of a workaround to allow the use of two + * discontinuous RAM ranges on the Wii, even if this is + * currently unsupported on 32-bit PowerPC Linux. + * + * We coalesce the two memory ranges of the Wii into a + * single range, then create a reservation for the "hole" + * between both ranges. + */ + + BUG_ON(memblock.memory.cnt != 2); + BUG_ON(!page_aligned(p[0].base) || !page_aligned(p[1].base)); + + /* trim unaligned tail */ + memblock_remove(ALIGN(p[1].base + p[1].size, PAGE_SIZE), + (phys_addr_t)ULLONG_MAX); + + /* determine hole, add & reserve them */ + wii_hole_start = ALIGN(p[0].base + p[0].size, PAGE_SIZE); + wii_hole_size = p[1].base - wii_hole_start; + memblock_add(wii_hole_start, wii_hole_size); + memblock_reserve(wii_hole_start, wii_hole_size); + + BUG_ON(memblock.memory.cnt != 1); + __memblock_dump_all(); + + /* allow ioremapping the address space in the hole */ + __allow_ioremap_reserved = 1; +} + +unsigned long __init wii_mmu_mapin_mem2(unsigned long top) +{ + unsigned long delta, size, bl; + unsigned long max_size = (256<<20); + + /* MEM2 64MB@0x10000000 */ + delta = wii_hole_start + wii_hole_size; + size = top - delta; + for (bl = 128<<10; bl < max_size; bl <<= 1) { + if (bl * 2 > size) + break; + } + setbat(4, PAGE_OFFSET+delta, delta, bl, PAGE_KERNEL_X); + return delta + bl; +} + +static void wii_spin(void) +{ + local_irq_disable(); + for (;;) + cpu_relax(); +} + +static void __iomem *wii_ioremap_hw_regs(char *name, char *compatible) +{ + void __iomem *hw_regs = NULL; + struct device_node *np; + struct resource res; + int error = -ENODEV; + + np = of_find_compatible_node(NULL, NULL, compatible); + if (!np) { + pr_err("no compatible node found for %s\n", compatible); + goto out; + } + error = of_address_to_resource(np, 0, &res); + if (error) { + pr_err("no valid reg found for %s\n", np->name); + goto out_put; + } + + hw_regs = ioremap(res.start, resource_size(&res)); + if (hw_regs) { + pr_info("%s at 0x%08x mapped to 0x%p\n", name, + res.start, hw_regs); + } + +out_put: + of_node_put(np); +out: + return hw_regs; +} + +static void __init wii_setup_arch(void) +{ + hw_ctrl = wii_ioremap_hw_regs("hw_ctrl", HW_CTRL_COMPATIBLE); + hw_gpio = wii_ioremap_hw_regs("hw_gpio", HW_GPIO_COMPATIBLE); + if (hw_gpio) { + /* turn off the front blue led and IR light */ + clrbits32(hw_gpio + HW_GPIO_OUT(0), + HW_GPIO_SLOT_LED | HW_GPIO_SENSOR_BAR); + } +} + +static void wii_restart(char *cmd) +{ + local_irq_disable(); + + if (hw_ctrl) { + /* clear the system reset pin to cause a reset */ + clrbits32(hw_ctrl + HW_CTRL_RESETS, HW_CTRL_RESETS_SYS); + } + wii_spin(); +} + +static void wii_power_off(void) +{ + local_irq_disable(); + + if (hw_gpio) { + /* make sure that the poweroff GPIO is configured as output */ + setbits32(hw_gpio + HW_GPIO_DIR(1), HW_GPIO_SHUTDOWN); + + /* drive the poweroff GPIO high */ + setbits32(hw_gpio + HW_GPIO_OUT(1), HW_GPIO_SHUTDOWN); + } + wii_spin(); +} + +static void wii_halt(void) +{ + if (ppc_md.restart) + ppc_md.restart(NULL); + wii_spin(); +} + +static void __init wii_init_early(void) +{ + ug_udbg_init(); +} + +static void __init wii_pic_probe(void) +{ + flipper_pic_probe(); + hlwd_pic_probe(); +} + +static int __init wii_probe(void) +{ + unsigned long dt_root; + + dt_root = of_get_flat_dt_root(); + if (!of_flat_dt_is_compatible(dt_root, "nintendo,wii")) + return 0; + + return 1; +} + +static void wii_shutdown(void) +{ + hlwd_quiesce(); + flipper_quiesce(); +} + +define_machine(wii) { + .name = "wii", + .probe = wii_probe, + .init_early = wii_init_early, + .setup_arch = wii_setup_arch, + .restart = wii_restart, + .power_off = wii_power_off, + .halt = wii_halt, + .init_IRQ = wii_pic_probe, + .get_irq = flipper_pic_get_irq, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, + .machine_shutdown = wii_shutdown, +}; + +static struct of_device_id wii_of_bus[] = { + { .compatible = "nintendo,hollywood", }, + { }, +}; + +static int __init wii_device_probe(void) +{ + if (!machine_is(wii)) + return 0; + + of_platform_bus_probe(NULL, wii_of_bus, NULL); + return 0; +} +device_initcall(wii_device_probe); + |