diff options
Diffstat (limited to 'arch/powerpc/platforms/85xx')
| -rw-r--r-- | arch/powerpc/platforms/85xx/Kconfig | 43 | ||||
| -rw-r--r-- | arch/powerpc/platforms/85xx/Makefile | 4 | ||||
| -rw-r--r-- | arch/powerpc/platforms/85xx/bsc913x_rdb.c | 67 | ||||
| -rw-r--r-- | arch/powerpc/platforms/85xx/mpc85xx_ds.c | 97 | ||||
| -rw-r--r-- | arch/powerpc/platforms/85xx/mpc85xx_rdb.c | 22 | ||||
| -rw-r--r-- | arch/powerpc/platforms/85xx/p1022_ds.c | 106 | ||||
| -rw-r--r-- | arch/powerpc/platforms/85xx/p3060_qds.c | 77 | ||||
| -rw-r--r-- | arch/powerpc/platforms/85xx/qemu_e500.c | 72 | ||||
| -rw-r--r-- | arch/powerpc/platforms/85xx/sbc8560.c | 254 |
9 files changed, 310 insertions, 432 deletions
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index f000d81c4e3..159c01e9146 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -23,6 +23,15 @@ config FSL_85XX_CACHE_SRAM cache-sram-size and cache-sram-offset kernel boot parameters should be passed when this option is enabled. +config BSC9131_RDB + bool "Freescale BSC9131RDB" + select DEFAULT_UIMAGE + help + This option enables support for the Freescale BSC9131RDB board. + The BSC9131 is a heterogeneous SoC containing an e500v2 powerpc and a + StarCore SC3850 DSP + Manufacturer : Freescale Semiconductor, Inc + config MPC8540_ADS bool "Freescale MPC8540 ADS" select DEFAULT_UIMAGE @@ -175,12 +184,6 @@ config SBC8548 help This option enables support for the Wind River SBC8548 board -config SBC8560 - bool "Wind River SBC8560" - select DEFAULT_UIMAGE - help - This option enables support for the Wind River SBC8560 board - config GE_IMP3A bool "GE Intelligent Platforms IMP3A" select DEFAULT_UIMAGE @@ -222,18 +225,6 @@ config P3041_DS help This option enables support for the P3041 DS board -config P3060_QDS - bool "Freescale P3060 QDS" - select DEFAULT_UIMAGE - select PPC_E500MC - select PHYS_64BIT - select SWIOTLB - select GPIO_MPC8XXX - select HAS_RAPIDIO - select PPC_EPAPR_HV_PIC - help - This option enables support for the P3060 QDS board - config P4080_DS bool "Freescale P4080 DS" select DEFAULT_UIMAGE @@ -263,6 +254,22 @@ config P5020_DS help This option enables support for the P5020 DS board +config PPC_QEMU_E500 + bool "QEMU generic e500 platform" + depends on EXPERIMENTAL + select DEFAULT_UIMAGE + help + This option enables support for running as a QEMU guest using + QEMU's generic e500 machine. This is not required if you're + using a QEMU machine that targets a specific board, such as + mpc8544ds. + + Unlike most e500 boards that target a specific CPU, this + platform works with any e500-family CPU that QEMU supports. + Thus, you'll need to make sure CONFIG_PPC_E500MC is set or + unset based on the emulated CPU (or actual host CPU in the case + of KVM). + endif # FSL_SOC_BOOKE config TQM85xx diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 2125d4ca068..3dfe8117503 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_SMP) += smp.o obj-y += common.o +obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o @@ -17,14 +18,13 @@ obj-$(CONFIG_P1022_DS) += p1022_ds.o obj-$(CONFIG_P1023_RDS) += p1023_rds.o obj-$(CONFIG_P2041_RDB) += p2041_rdb.o corenet_ds.o obj-$(CONFIG_P3041_DS) += p3041_ds.o corenet_ds.o -obj-$(CONFIG_P3060_QDS) += p3060_qds.o corenet_ds.o obj-$(CONFIG_P4080_DS) += p4080_ds.o corenet_ds.o obj-$(CONFIG_P5020_DS) += p5020_ds.o corenet_ds.o obj-$(CONFIG_STX_GP3) += stx_gp3.o obj-$(CONFIG_TQM85xx) += tqm85xx.o -obj-$(CONFIG_SBC8560) += sbc8560.o obj-$(CONFIG_SBC8548) += sbc8548.o obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o obj-$(CONFIG_KSI8560) += ksi8560.o obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o obj-$(CONFIG_GE_IMP3A) += ge_imp3a.o +obj-$(CONFIG_PPC_QEMU_E500) += qemu_e500.o diff --git a/arch/powerpc/platforms/85xx/bsc913x_rdb.c b/arch/powerpc/platforms/85xx/bsc913x_rdb.c new file mode 100644 index 00000000000..9d57bedb940 --- /dev/null +++ b/arch/powerpc/platforms/85xx/bsc913x_rdb.c @@ -0,0 +1,67 @@ +/* + * BSC913xRDB Board Setup + * + * Author: Priyanka Jain <Priyanka.Jain@freescale.com> + * + * Copyright 2011-2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/of_platform.h> +#include <linux/pci.h> +#include <asm/mpic.h> +#include <sysdev/fsl_soc.h> +#include <asm/udbg.h> + +#include "mpc85xx.h" + +void __init bsc913x_rdb_pic_init(void) +{ + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | + MPIC_SINGLE_DEST_CPU, + 0, 256, " OpenPIC "); + + if (!mpic) + pr_err("bsc913x: Failed to allocate MPIC structure\n"); + else + mpic_init(mpic); +} + +/* + * Setup the architecture + */ +static void __init bsc913x_rdb_setup_arch(void) +{ + if (ppc_md.progress) + ppc_md.progress("bsc913x_rdb_setup_arch()", 0); + + pr_info("bsc913x board from Freescale Semiconductor\n"); +} + +machine_device_initcall(bsc9131_rdb, mpc85xx_common_publish_devices); + +/* + * Called very early, device-tree isn't unflattened + */ + +static int __init bsc9131_rdb_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,bsc9131rdb"); +} + +define_machine(bsc9131_rdb) { + .name = "BSC9131 RDB", + .probe = bsc9131_rdb_probe, + .setup_arch = bsc913x_rdb_setup_arch, + .init_IRQ = bsc913x_rdb_pic_init, + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c index d30f6c47917..6d3265fe771 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c @@ -114,71 +114,53 @@ void __init mpc85xx_ds_pic_init(void) } #ifdef CONFIG_PCI -static int primary_phb_addr; extern int uli_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn); +static struct device_node *pci_with_uli; + static int mpc85xx_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn) { - struct device_node* node; - struct resource rsrc; - - node = hose->dn; - of_address_to_resource(node, 0, &rsrc); - - if ((rsrc.start & 0xfffff) == primary_phb_addr) { + if (hose->dn == pci_with_uli) return uli_exclude_device(hose, bus, devfn); - } return PCIBIOS_SUCCESSFUL; } #endif /* CONFIG_PCI */ -/* - * Setup the architecture - */ -static void __init mpc85xx_ds_setup_arch(void) +static void __init mpc85xx_ds_pci_init(void) { #ifdef CONFIG_PCI - struct device_node *np; - struct pci_controller *hose; -#endif - dma_addr_t max = 0xffffffff; + struct device_node *node; - if (ppc_md.progress) - ppc_md.progress("mpc85xx_ds_setup_arch()", 0); + fsl_pci_init(); -#ifdef CONFIG_PCI - for_each_node_by_type(np, "pci") { - if (of_device_is_compatible(np, "fsl,mpc8540-pci") || - of_device_is_compatible(np, "fsl,mpc8548-pcie") || - of_device_is_compatible(np, "fsl,p2020-pcie")) { - struct resource rsrc; - of_address_to_resource(np, 0, &rsrc); - if ((rsrc.start & 0xfffff) == primary_phb_addr) - fsl_add_bridge(np, 1); - else - fsl_add_bridge(np, 0); - - hose = pci_find_hose_for_OF_device(np); - max = min(max, hose->dma_window_base_cur + - hose->dma_window_size); + /* See if we have a ULI under the primary */ + + node = of_find_node_by_name(NULL, "uli1575"); + while ((pci_with_uli = of_get_parent(node))) { + of_node_put(node); + node = pci_with_uli; + + if (pci_with_uli == fsl_pci_primary) { + ppc_md.pci_exclude_device = mpc85xx_exclude_device; + break; } } - - ppc_md.pci_exclude_device = mpc85xx_exclude_device; #endif +} - mpc85xx_smp_init(); +/* + * Setup the architecture + */ +static void __init mpc85xx_ds_setup_arch(void) +{ + if (ppc_md.progress) + ppc_md.progress("mpc85xx_ds_setup_arch()", 0); -#ifdef CONFIG_SWIOTLB - if ((memblock_end_of_DRAM() - 1) > max) { - ppc_swiotlb_enable = 1; - set_pci_dma_ops(&swiotlb_dma_ops); - ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; - } -#endif + mpc85xx_ds_pci_init(); + mpc85xx_smp_init(); printk("MPC85xx DS board from Freescale Semiconductor\n"); } @@ -190,14 +172,7 @@ static int __init mpc8544_ds_probe(void) { unsigned long root = of_get_flat_dt_root(); - if (of_flat_dt_is_compatible(root, "MPC8544DS")) { -#ifdef CONFIG_PCI - primary_phb_addr = 0xb000; -#endif - return 1; - } - - return 0; + return !!of_flat_dt_is_compatible(root, "MPC8544DS"); } machine_device_initcall(mpc8544_ds, mpc85xx_common_publish_devices); @@ -215,14 +190,7 @@ static int __init mpc8572_ds_probe(void) { unsigned long root = of_get_flat_dt_root(); - if (of_flat_dt_is_compatible(root, "fsl,MPC8572DS")) { -#ifdef CONFIG_PCI - primary_phb_addr = 0x8000; -#endif - return 1; - } - - return 0; + return !!of_flat_dt_is_compatible(root, "fsl,MPC8572DS"); } /* @@ -232,14 +200,7 @@ static int __init p2020_ds_probe(void) { unsigned long root = of_get_flat_dt_root(); - if (of_flat_dt_is_compatible(root, "fsl,P2020DS")) { -#ifdef CONFIG_PCI - primary_phb_addr = 0x9000; -#endif - return 1; - } - - return 0; + return !!of_flat_dt_is_compatible(root, "fsl,P2020DS"); } define_machine(mpc8544_ds) { diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c index 313fce4f557..1910fdcb75b 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c @@ -169,6 +169,7 @@ machine_device_initcall(p1020_rdb_pc, mpc85xx_common_publish_devices); machine_device_initcall(p1020_utm_pc, mpc85xx_common_publish_devices); machine_device_initcall(p1021_rdb_pc, mpc85xx_common_publish_devices); machine_device_initcall(p1025_rdb, mpc85xx_common_publish_devices); +machine_device_initcall(p1024_rdb, mpc85xx_common_publish_devices); /* * Called very early, device-tree isn't unflattened @@ -237,6 +238,13 @@ static int __init p1020_utm_pc_probe(void) return of_flat_dt_is_compatible(root, "fsl,P1020UTM-PC"); } +static int __init p1024_rdb_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,P1024RDB"); +} + define_machine(p2020_rdb) { .name = "P2020 RDB", .probe = p2020_rdb_probe, @@ -348,3 +356,17 @@ define_machine(p1020_rdb_pc) { .calibrate_decr = generic_calibrate_decr, .progress = udbg_progress, }; + +define_machine(p1024_rdb) { + .name = "P1024 RDB", + .probe = p1024_rdb_probe, + .setup_arch = mpc85xx_rdb_setup_arch, + .init_IRQ = mpc85xx_rdb_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c index 31d18b964f9..89ee02c5456 100644 --- a/arch/powerpc/platforms/85xx/p1022_ds.c +++ b/arch/powerpc/platforms/85xx/p1022_ds.c @@ -27,6 +27,7 @@ #include <sysdev/fsl_pci.h> #include <asm/udbg.h> #include <asm/fsl_guts.h> +#include <asm/fsl_lbc.h> #include "smp.h" #include "mpc85xx.h" @@ -142,17 +143,73 @@ static void p1022ds_set_gamma_table(enum fsl_diu_monitor_port port, { } +struct fsl_law { + u32 lawbar; + u32 reserved1; + u32 lawar; + u32 reserved[5]; +}; + +#define LAWBAR_MASK 0x00F00000 +#define LAWBAR_SHIFT 12 + +#define LAWAR_EN 0x80000000 +#define LAWAR_TGT_MASK 0x01F00000 +#define LAW_TRGT_IF_LBC (0x04 << 20) + +#define LAWAR_MASK (LAWAR_EN | LAWAR_TGT_MASK) +#define LAWAR_MATCH (LAWAR_EN | LAW_TRGT_IF_LBC) + +#define BR_BA 0xFFFF8000 + +/* + * Map a BRx value to a physical address + * + * The localbus BRx registers only store the lower 32 bits of the address. To + * obtain the upper four bits, we need to scan the LAW table. The entry which + * maps to the localbus will contain the upper four bits. + */ +static phys_addr_t lbc_br_to_phys(const void *ecm, unsigned int count, u32 br) +{ +#ifndef CONFIG_PHYS_64BIT + /* + * If we only have 32-bit addressing, then the BRx address *is* the + * physical address. + */ + return br & BR_BA; +#else + const struct fsl_law *law = ecm + 0xc08; + unsigned int i; + + for (i = 0; i < count; i++) { + u64 lawbar = in_be32(&law[i].lawbar); + u32 lawar = in_be32(&law[i].lawar); + + if ((lawar & LAWAR_MASK) == LAWAR_MATCH) + /* Extract the upper four bits */ + return (br & BR_BA) | ((lawbar & LAWBAR_MASK) << 12); + } + + return 0; +#endif +} + /** * p1022ds_set_monitor_port: switch the output to a different monitor port - * */ static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port) { struct device_node *guts_node; - struct device_node *indirect_node = NULL; + struct device_node *lbc_node = NULL; + struct device_node *law_node = NULL; struct ccsr_guts __iomem *guts; + struct fsl_lbc_regs *lbc = NULL; + void *ecm = NULL; u8 __iomem *lbc_lcs0_ba = NULL; u8 __iomem *lbc_lcs1_ba = NULL; + phys_addr_t cs0_addr, cs1_addr; + const __be32 *iprop; + unsigned int num_laws; u8 b; /* Map the global utilities registers. */ @@ -168,25 +225,43 @@ static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port) goto exit; } - indirect_node = of_find_compatible_node(NULL, NULL, - "fsl,p1022ds-indirect-pixis"); - if (!indirect_node) { - pr_err("p1022ds: missing pixis indirect mode node\n"); + lbc_node = of_find_compatible_node(NULL, NULL, "fsl,p1022-elbc"); + if (!lbc_node) { + pr_err("p1022ds: missing localbus node\n"); goto exit; } - lbc_lcs0_ba = of_iomap(indirect_node, 0); - if (!lbc_lcs0_ba) { - pr_err("p1022ds: could not map localbus chip select 0\n"); + lbc = of_iomap(lbc_node, 0); + if (!lbc) { + pr_err("p1022ds: could not map localbus node\n"); goto exit; } - lbc_lcs1_ba = of_iomap(indirect_node, 1); - if (!lbc_lcs1_ba) { - pr_err("p1022ds: could not map localbus chip select 1\n"); + law_node = of_find_compatible_node(NULL, NULL, "fsl,ecm-law"); + if (!law_node) { + pr_err("p1022ds: missing local access window node\n"); goto exit; } + ecm = of_iomap(law_node, 0); + if (!ecm) { + pr_err("p1022ds: could not map local access window node\n"); + goto exit; + } + + iprop = of_get_property(law_node, "fsl,num-laws", 0); + if (!iprop) { + pr_err("p1022ds: LAW node is missing fsl,num-laws property\n"); + goto exit; + } + num_laws = be32_to_cpup(iprop); + + cs0_addr = lbc_br_to_phys(ecm, num_laws, in_be32(&lbc->bank[0].br)); + cs1_addr = lbc_br_to_phys(ecm, num_laws, in_be32(&lbc->bank[1].br)); + + lbc_lcs0_ba = ioremap(cs0_addr, 1); + lbc_lcs1_ba = ioremap(cs1_addr, 1); + /* Make sure we're in indirect mode first. */ if ((in_be32(&guts->pmuxcr) & PMUXCR_ELBCDIU_MASK) != PMUXCR_ELBCDIU_DIU) { @@ -254,10 +329,15 @@ exit: iounmap(lbc_lcs1_ba); if (lbc_lcs0_ba) iounmap(lbc_lcs0_ba); + if (lbc) + iounmap(lbc); + if (ecm) + iounmap(ecm); if (guts) iounmap(guts); - of_node_put(indirect_node); + of_node_put(law_node); + of_node_put(lbc_node); of_node_put(guts_node); } diff --git a/arch/powerpc/platforms/85xx/p3060_qds.c b/arch/powerpc/platforms/85xx/p3060_qds.c deleted file mode 100644 index 081cf4ac188..00000000000 --- a/arch/powerpc/platforms/85xx/p3060_qds.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - * P3060 QDS Setup - * - * Copyright 2011 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/phy.h> -#include <asm/machdep.h> -#include <asm/udbg.h> -#include <asm/mpic.h> -#include <linux/of_platform.h> -#include <sysdev/fsl_soc.h> -#include <sysdev/fsl_pci.h> -#include <asm/ehv_pic.h> -#include "corenet_ds.h" - -/* - * Called very early, device-tree isn't unflattened - */ -static int __init p3060_qds_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); -#ifdef CONFIG_SMP - extern struct smp_ops_t smp_85xx_ops; -#endif - - if (of_flat_dt_is_compatible(root, "fsl,P3060QDS")) - return 1; - - /* Check if we're running under the Freescale hypervisor */ - if (of_flat_dt_is_compatible(root, "fsl,P3060QDS-hv")) { - ppc_md.init_IRQ = ehv_pic_init; - ppc_md.get_irq = ehv_pic_get_irq; - ppc_md.restart = fsl_hv_restart; - ppc_md.power_off = fsl_hv_halt; - ppc_md.halt = fsl_hv_halt; -#ifdef CONFIG_SMP - /* - * Disable the timebase sync operations because we can't write - * to the timebase registers under the hypervisor. - */ - smp_85xx_ops.give_timebase = NULL; - smp_85xx_ops.take_timebase = NULL; -#endif - return 1; - } - - return 0; -} - -define_machine(p3060_qds) { - .name = "P3060 QDS", - .probe = p3060_qds_probe, - .setup_arch = corenet_ds_setup_arch, - .init_IRQ = corenet_ds_pic_init, -#ifdef CONFIG_PCI - .pcibios_fixup_bus = fsl_pcibios_fixup_bus, -#endif - .get_irq = mpic_get_coreint_irq, - .restart = fsl_rstcr_restart, - .calibrate_decr = generic_calibrate_decr, - .progress = udbg_progress, - .power_save = e500_idle, -}; - -machine_device_initcall(p3060_qds, corenet_ds_publish_devices); - -#ifdef CONFIG_SWIOTLB -machine_arch_initcall(p3060_qds, swiotlb_setup_bus_notifier); -#endif diff --git a/arch/powerpc/platforms/85xx/qemu_e500.c b/arch/powerpc/platforms/85xx/qemu_e500.c new file mode 100644 index 00000000000..95a2e53af71 --- /dev/null +++ b/arch/powerpc/platforms/85xx/qemu_e500.c @@ -0,0 +1,72 @@ +/* + * Paravirt target for a generic QEMU e500 machine + * + * This is intended to be a flexible device-tree-driven platform, not fixed + * to a particular piece of hardware or a particular spec of virtual hardware, + * beyond the assumption of an e500-family CPU. Some things are still hardcoded + * here, such as MPIC, but this is a limitation of the current code rather than + * an interface contract with QEMU. + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/of_fdt.h> +#include <asm/machdep.h> +#include <asm/time.h> +#include <asm/udbg.h> +#include <asm/mpic.h> +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> +#include "smp.h" +#include "mpc85xx.h" + +void __init qemu_e500_pic_init(void) +{ + struct mpic *mpic; + + mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU, + 0, 256, " OpenPIC "); + + BUG_ON(mpic == NULL); + mpic_init(mpic); +} + +static void __init qemu_e500_setup_arch(void) +{ + ppc_md.progress("qemu_e500_setup_arch()", 0); + + fsl_pci_init(); + mpc85xx_smp_init(); +} + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init qemu_e500_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return !!of_flat_dt_is_compatible(root, "fsl,qemu-e500"); +} + +machine_device_initcall(qemu_e500, mpc85xx_common_publish_devices); + +define_machine(qemu_e500) { + .name = "QEMU e500", + .probe = qemu_e500_probe, + .setup_arch = qemu_e500_setup_arch, + .init_IRQ = qemu_e500_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c deleted file mode 100644 index b1be632ede4..00000000000 --- a/arch/powerpc/platforms/85xx/sbc8560.c +++ /dev/null @@ -1,254 +0,0 @@ -/* - * Wind River SBC8560 setup and early boot code. - * - * Copyright 2007 Wind River Systems Inc. - * - * By Paul Gortmaker (see MAINTAINERS for contact information) - * - * Based largely on the MPC8560ADS support - Copyright 2005 Freescale Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/stddef.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/delay.h> -#include <linux/seq_file.h> -#include <linux/of_platform.h> - -#include <asm/time.h> -#include <asm/machdep.h> -#include <asm/pci-bridge.h> -#include <asm/mpic.h> -#include <mm/mmu_decl.h> -#include <asm/udbg.h> - -#include <sysdev/fsl_soc.h> -#include <sysdev/fsl_pci.h> - -#include "mpc85xx.h" - -#ifdef CONFIG_CPM2 -#include <asm/cpm2.h> -#include <sysdev/cpm2_pic.h> -#endif - -static void __init sbc8560_pic_init(void) -{ - struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN, - 0, 256, " OpenPIC "); - BUG_ON(mpic == NULL); - mpic_init(mpic); - - mpc85xx_cpm2_pic_init(); -} - -/* - * Setup the architecture - */ -#ifdef CONFIG_CPM2 -struct cpm_pin { - int port, pin, flags; -}; - -static const struct cpm_pin sbc8560_pins[] = { - /* SCC1 */ - {3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, - {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - - /* SCC2 */ - {3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - - /* FCC2 */ - {1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, - {1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK14 */ - {2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK13 */ - - /* FCC3 */ - {1, 4, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 6, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 7, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 14, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 15, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {2, 16, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK16 */ - {2, 17, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK15 */ -}; - -static void __init init_ioports(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(sbc8560_pins); i++) { - const struct cpm_pin *pin = &sbc8560_pins[i]; - cpm2_set_pin(pin->port, pin->pin, pin->flags); - } - - cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX); - cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX); - cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX); - cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX); - cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX); - cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX); - cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK15, CPM_CLK_RX); - cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK16, CPM_CLK_TX); -} -#endif - -static void __init sbc8560_setup_arch(void) -{ -#ifdef CONFIG_PCI - struct device_node *np; -#endif - - if (ppc_md.progress) - ppc_md.progress("sbc8560_setup_arch()", 0); - -#ifdef CONFIG_CPM2 - cpm2_reset(); - init_ioports(); -#endif - -#ifdef CONFIG_PCI - for_each_compatible_node(np, "pci", "fsl,mpc8540-pci") - fsl_add_bridge(np, 1); -#endif -} - -static void sbc8560_show_cpuinfo(struct seq_file *m) -{ - uint pvid, svid, phid1; - - pvid = mfspr(SPRN_PVR); - svid = mfspr(SPRN_SVR); - - seq_printf(m, "Vendor\t\t: Wind River\n"); - seq_printf(m, "PVR\t\t: 0x%x\n", pvid); - seq_printf(m, "SVR\t\t: 0x%x\n", svid); - - /* Display cpu Pll setting */ - phid1 = mfspr(SPRN_HID1); - seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); -} - -machine_device_initcall(sbc8560, mpc85xx_common_publish_devices); - -/* - * Called very early, device-tree isn't unflattened - */ -static int __init sbc8560_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); - - return of_flat_dt_is_compatible(root, "SBC8560"); -} - -#ifdef CONFIG_RTC_DRV_M48T59 -static int __init sbc8560_rtc_init(void) -{ - struct device_node *np; - struct resource res; - struct platform_device *rtc_dev; - - np = of_find_compatible_node(NULL, NULL, "m48t59"); - if (np == NULL) { - printk("No RTC in DTB. Has it been eaten by wild dogs?\n"); - return -ENODEV; - } - - of_address_to_resource(np, 0, &res); - of_node_put(np); - - printk("Found RTC (m48t59) at i/o 0x%x\n", res.start); - - rtc_dev = platform_device_register_simple("rtc-m48t59", 0, &res, 1); - - if (IS_ERR(rtc_dev)) { - printk("Registering sbc8560 RTC device failed\n"); - return PTR_ERR(rtc_dev); - } - - return 0; -} - -arch_initcall(sbc8560_rtc_init); - -#endif /* M48T59 */ - -static __u8 __iomem *brstcr; - -static int __init sbc8560_bdrstcr_init(void) -{ - struct device_node *np; - struct resource res; - - np = of_find_compatible_node(NULL, NULL, "wrs,sbc8560-brstcr"); - if (np == NULL) { - printk(KERN_WARNING "sbc8560: No board specific RSTCR in DTB.\n"); - return -ENODEV; - } - - of_address_to_resource(np, 0, &res); - - printk(KERN_INFO "sbc8560: Found BRSTCR at %pR\n", &res); - - brstcr = ioremap(res.start, resource_size(&res)); - if(!brstcr) - printk(KERN_WARNING "sbc8560: ioremap of brstcr failed.\n"); - - of_node_put(np); - - return 0; -} - -arch_initcall(sbc8560_bdrstcr_init); - -void sbc8560_rstcr_restart(char * cmd) -{ - local_irq_disable(); - if(brstcr) - clrbits8(brstcr, 0x80); - - while(1); -} - -define_machine(sbc8560) { - .name = "SBC8560", - .probe = sbc8560_probe, - .setup_arch = sbc8560_setup_arch, - .init_IRQ = sbc8560_pic_init, - .show_cpuinfo = sbc8560_show_cpuinfo, - .get_irq = mpic_get_irq, - .restart = sbc8560_rstcr_restart, - .calibrate_decr = generic_calibrate_decr, - .progress = udbg_progress, -}; |