diff options
Diffstat (limited to 'arch/powerpc/platforms/85xx/p1022_ds.c')
| -rw-r--r-- | arch/powerpc/platforms/85xx/p1022_ds.c | 211 |
1 files changed, 209 insertions, 2 deletions
diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c index 2b390d19a1d..7eb5c40c069 100644 --- a/arch/powerpc/platforms/85xx/p1022_ds.c +++ b/arch/powerpc/platforms/85xx/p1022_ds.c @@ -8,7 +8,6 @@ * Copyright 2010 Freescale Semiconductor, Inc. * * This file is taken from the Freescale P1022DS BSP, with modifications: - * 1) No DIU support (pending rewrite of DIU code) * 2) No AMP support * 3) No PCI endpoint support * @@ -20,12 +19,211 @@ #include <linux/pci.h> #include <linux/of_platform.h> #include <linux/memblock.h> - +#include <asm/div64.h> #include <asm/mpic.h> #include <asm/swiotlb.h> #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> +#include <asm/fsl_guts.h> + +#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) + +/* + * Board-specific initialization of the DIU. This code should probably be + * executed when the DIU is opened, rather than in arch code, but the DIU + * driver does not have a mechanism for this (yet). + * + * This is especially problematic on the P1022DS because the local bus (eLBC) + * and the DIU video signals share the same pins, which means that enabling the + * DIU will disable access to NOR flash. + */ + +/* DIU Pixel Clock bits of the CLKDVDR Global Utilities register */ +#define CLKDVDR_PXCKEN 0x80000000 +#define CLKDVDR_PXCKINV 0x10000000 +#define CLKDVDR_PXCKDLY 0x06000000 +#define CLKDVDR_PXCLK_MASK 0x00FF0000 + +/* Some ngPIXIS register definitions */ +#define PX_BRDCFG1_DVIEN 0x80 +#define PX_BRDCFG1_DFPEN 0x40 +#define PX_BRDCFG1_BACKLIGHT 0x20 +#define PX_BRDCFG1_DDCEN 0x10 + +/* + * DIU Area Descriptor + * + * Note that we need to byte-swap the value before it's written to the AD + * register. So even though the registers don't look like they're in the same + * bit positions as they are on the MPC8610, the same value is written to the + * AD register on the MPC8610 and on the P1022. + */ +#define AD_BYTE_F 0x10000000 +#define AD_ALPHA_C_MASK 0x0E000000 +#define AD_ALPHA_C_SHIFT 25 +#define AD_BLUE_C_MASK 0x01800000 +#define AD_BLUE_C_SHIFT 23 +#define AD_GREEN_C_MASK 0x00600000 +#define AD_GREEN_C_SHIFT 21 +#define AD_RED_C_MASK 0x00180000 +#define AD_RED_C_SHIFT 19 +#define AD_PALETTE 0x00040000 +#define AD_PIXEL_S_MASK 0x00030000 +#define AD_PIXEL_S_SHIFT 16 +#define AD_COMP_3_MASK 0x0000F000 +#define AD_COMP_3_SHIFT 12 +#define AD_COMP_2_MASK 0x00000F00 +#define AD_COMP_2_SHIFT 8 +#define AD_COMP_1_MASK 0x000000F0 +#define AD_COMP_1_SHIFT 4 +#define AD_COMP_0_MASK 0x0000000F +#define AD_COMP_0_SHIFT 0 + +#define MAKE_AD(alpha, red, blue, green, size, c0, c1, c2, c3) \ + cpu_to_le32(AD_BYTE_F | (alpha << AD_ALPHA_C_SHIFT) | \ + (blue << AD_BLUE_C_SHIFT) | (green << AD_GREEN_C_SHIFT) | \ + (red << AD_RED_C_SHIFT) | (c3 << AD_COMP_3_SHIFT) | \ + (c2 << AD_COMP_2_SHIFT) | (c1 << AD_COMP_1_SHIFT) | \ + (c0 << AD_COMP_0_SHIFT) | (size << AD_PIXEL_S_SHIFT)) + +/** + * p1022ds_get_pixel_format: return the Area Descriptor for a given pixel depth + * + * The Area Descriptor is a 32-bit value that determine which bits in each + * pixel are to be used for each color. + */ +static unsigned int p1022ds_get_pixel_format(unsigned int bits_per_pixel, + int monitor_port) +{ + switch (bits_per_pixel) { + case 32: + /* 0x88883316 */ + return MAKE_AD(3, 2, 0, 1, 3, 8, 8, 8, 8); + case 24: + /* 0x88082219 */ + return MAKE_AD(4, 0, 1, 2, 2, 0, 8, 8, 8); + case 16: + /* 0x65053118 */ + return MAKE_AD(4, 2, 1, 0, 1, 5, 6, 5, 0); + default: + pr_err("fsl-diu: unsupported pixel depth %u\n", bits_per_pixel); + return 0; + } +} + +/** + * p1022ds_set_gamma_table: update the gamma table, if necessary + * + * On some boards, the gamma table for some ports may need to be modified. + * This is not the case on the P1022DS, so we do nothing. +*/ +static void p1022ds_set_gamma_table(int monitor_port, char *gamma_table_base) +{ +} + +/** + * p1022ds_set_monitor_port: switch the output to a different monitor port + * + */ +static void p1022ds_set_monitor_port(int monitor_port) +{ + struct device_node *pixis_node; + u8 __iomem *brdcfg1; + + pixis_node = of_find_compatible_node(NULL, NULL, "fsl,p1022ds-pixis"); + if (!pixis_node) { + pr_err("p1022ds: missing ngPIXIS node\n"); + return; + } + + brdcfg1 = of_iomap(pixis_node, 0); + if (!brdcfg1) { + pr_err("p1022ds: could not map ngPIXIS registers\n"); + return; + } + brdcfg1 += 9; /* BRDCFG1 is at offset 9 in the ngPIXIS */ + + switch (monitor_port) { + case 0: /* DVI */ + /* Enable the DVI port, disable the DFP and the backlight */ + clrsetbits_8(brdcfg1, PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT, + PX_BRDCFG1_DVIEN); + break; + case 1: /* Single link LVDS */ + /* Enable the DFP port, disable the DVI and the backlight */ + clrsetbits_8(brdcfg1, PX_BRDCFG1_DVIEN | PX_BRDCFG1_BACKLIGHT, + PX_BRDCFG1_DFPEN); + break; + default: + pr_err("p1022ds: unsupported monitor port %i\n", monitor_port); + } +} + +/** + * p1022ds_set_pixel_clock: program the DIU's clock + * + * @pixclock: the wavelength, in picoseconds, of the clock + */ +void p1022ds_set_pixel_clock(unsigned int pixclock) +{ + struct device_node *guts_np = NULL; + struct ccsr_guts_85xx __iomem *guts; + unsigned long freq; + u64 temp; + u32 pxclk; + + /* Map the global utilities registers. */ + guts_np = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts"); + if (!guts_np) { + pr_err("p1022ds: missing global utilties device node\n"); + return; + } + + guts = of_iomap(guts_np, 0); + of_node_put(guts_np); + if (!guts) { + pr_err("p1022ds: could not map global utilties device\n"); + return; + } + + /* Convert pixclock from a wavelength to a frequency */ + temp = 1000000000000ULL; + do_div(temp, pixclock); + freq = temp; + + /* pixclk is the ratio of the platform clock to the pixel clock */ + pxclk = DIV_ROUND_CLOSEST(fsl_get_sys_freq(), freq); + + /* Disable the pixel clock, and set it to non-inverted and no delay */ + clrbits32(&guts->clkdvdr, + CLKDVDR_PXCKEN | CLKDVDR_PXCKDLY | CLKDVDR_PXCLK_MASK); + + /* Enable the clock and set the pxclk */ + setbits32(&guts->clkdvdr, CLKDVDR_PXCKEN | (pxclk << 16)); +} + +/** + * p1022ds_show_monitor_port: show the current monitor + * + * This function returns a string indicating whether the current monitor is + * set to DVI or LVDS. + */ +ssize_t p1022ds_show_monitor_port(int monitor_port, char *buf) +{ + return sprintf(buf, "%c0 - DVI\n%c1 - Single link LVDS\n", + monitor_port == 0 ? '*' : ' ', monitor_port == 1 ? '*' : ' '); +} + +/** + * p1022ds_set_sysfs_monitor_port: set the monitor port for sysfs + */ +int p1022ds_set_sysfs_monitor_port(int val) +{ + return val < 2 ? val : 0; +} + +#endif void __init p1022_ds_pic_init(void) { @@ -92,6 +290,15 @@ static void __init p1022_ds_setup_arch(void) } #endif +#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) + diu_ops.get_pixel_format = p1022ds_get_pixel_format; + diu_ops.set_gamma_table = p1022ds_set_gamma_table; + diu_ops.set_monitor_port = p1022ds_set_monitor_port; + diu_ops.set_pixel_clock = p1022ds_set_pixel_clock; + diu_ops.show_monitor_port = p1022ds_show_monitor_port; + diu_ops.set_sysfs_monitor_port = p1022ds_set_sysfs_monitor_port; +#endif + #ifdef CONFIG_SMP mpc85xx_smp_init(); #endif |