diff options
Diffstat (limited to 'arch/powerpc/kernel/legacy_serial.c')
| -rw-r--r-- | arch/powerpc/kernel/legacy_serial.c | 337 |
1 files changed, 216 insertions, 121 deletions
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 6e67b5b49ba..936258881c9 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -1,10 +1,12 @@ -#include <linux/config.h> #include <linux/kernel.h> #include <linux/serial.h> #include <linux/serial_8250.h> #include <linux/serial_core.h> #include <linux/console.h> #include <linux/pci.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/serial_reg.h> #include <asm/io.h> #include <asm/mmu.h> #include <asm/prom.h> @@ -29,26 +31,66 @@ static struct legacy_serial_info { struct device_node *np; unsigned int speed; unsigned int clock; + int irq_check_parent; phys_addr_t taddr; } legacy_serial_infos[MAX_LEGACY_SERIAL_PORTS]; + +static struct of_device_id legacy_serial_parents[] __initdata = { + {.type = "soc",}, + {.type = "tsi-bridge",}, + {.type = "opb", }, + {.compatible = "ibm,opb",}, + {.compatible = "simple-bus",}, + {.compatible = "wrs,epld-localbus",}, + {}, +}; + static unsigned int legacy_serial_count; static int legacy_serial_console = -1; +static const upf_t legacy_port_flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_SHARE_IRQ | UPF_FIXED_PORT; + +static unsigned int tsi_serial_in(struct uart_port *p, int offset) +{ + unsigned int tmp; + offset = offset << p->regshift; + if (offset == UART_IIR) { + tmp = readl(p->membase + (UART_IIR & ~3)); + return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */ + } else + return readb(p->membase + offset); +} + +static void tsi_serial_out(struct uart_port *p, int offset, int value) +{ + offset = offset << p->regshift; + if (!((offset == UART_IER) && (value & UART_IER_UUE))) + writeb(value, p->membase + offset); +} + static int __init add_legacy_port(struct device_node *np, int want_index, int iotype, phys_addr_t base, phys_addr_t taddr, unsigned long irq, - upf_t flags) + upf_t flags, int irq_check_parent) { - u32 *clk, *spd, clock = BASE_BAUD * 16; + const __be32 *clk, *spd, *rs; + u32 clock = BASE_BAUD * 16; + u32 shift = 0; int index; /* get clock freq. if present */ - clk = (u32 *)get_property(np, "clock-frequency", NULL); + clk = of_get_property(np, "clock-frequency", NULL); if (clk && *clk) - clock = *clk; + clock = be32_to_cpup(clk); /* get default speed if present */ - spd = (u32 *)get_property(np, "current-speed", NULL); + spd = of_get_property(np, "current-speed", NULL); + + /* get register shift if present */ + rs = of_get_property(np, "reg-shift", NULL); + if (rs && *rs) + shift = be32_to_cpup(rs); /* If we have a location index, then try to use it */ if (want_index >= 0 && want_index < MAX_LEGACY_SERIAL_PORTS) @@ -66,10 +108,10 @@ static int __init add_legacy_port(struct device_node *np, int want_index, legacy_serial_count = index + 1; /* Check if there is a port who already claimed our slot */ - if (legacy_serial_infos[index].np != 0) { + if (legacy_serial_infos[index].np != NULL) { /* if we still have some room, move it, else override */ if (legacy_serial_count < MAX_LEGACY_SERIAL_PORTS) { - printk(KERN_INFO "Moved legacy port %d -> %d\n", + printk(KERN_DEBUG "Moved legacy port %d -> %d\n", index, legacy_serial_count); legacy_serial_ports[legacy_serial_count] = legacy_serial_ports[index]; @@ -77,7 +119,7 @@ static int __init add_legacy_port(struct device_node *np, int want_index, legacy_serial_infos[index]; legacy_serial_count++; } else { - printk(KERN_INFO "Replacing legacy port %d\n", index); + printk(KERN_DEBUG "Replacing legacy port %d\n", index); } } @@ -88,18 +130,26 @@ static int __init add_legacy_port(struct device_node *np, int want_index, legacy_serial_ports[index].iobase = base; else legacy_serial_ports[index].mapbase = base; + legacy_serial_ports[index].iotype = iotype; legacy_serial_ports[index].uartclk = clock; legacy_serial_ports[index].irq = irq; legacy_serial_ports[index].flags = flags; + legacy_serial_ports[index].regshift = shift; legacy_serial_infos[index].taddr = taddr; legacy_serial_infos[index].np = of_node_get(np); legacy_serial_infos[index].clock = clock; - legacy_serial_infos[index].speed = spd ? *spd : 0; + legacy_serial_infos[index].speed = spd ? be32_to_cpup(spd) : 0; + legacy_serial_infos[index].irq_check_parent = irq_check_parent; - printk(KERN_INFO "Found legacy serial port %d for %s\n", + if (iotype == UPIO_TSI) { + legacy_serial_ports[index].serial_in = tsi_serial_in; + legacy_serial_ports[index].serial_out = tsi_serial_out; + } + + printk(KERN_DEBUG "Found legacy serial port %d for %s\n", index, np->full_name); - printk(KERN_INFO " %s=%llx, taddr=%llx, irq=%lx, clk=%d, speed=%d\n", + printk(KERN_DEBUG " %s=%llx, taddr=%llx, irq=%lx, clk=%d, speed=%d\n", (iotype == UPIO_PORT) ? "port" : "mem", (unsigned long long)base, (unsigned long long)taddr, irq, legacy_serial_ports[index].uartclk, @@ -111,14 +161,22 @@ static int __init add_legacy_port(struct device_node *np, int want_index, static int __init add_legacy_soc_port(struct device_node *np, struct device_node *soc_dev) { - phys_addr_t addr; - u32 *addrp; - upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; + u64 addr; + const __be32 *addrp; + struct device_node *tsi = of_get_parent(np); /* We only support ports that have a clock frequency properly * encoded in the device-tree. */ - if (get_property(np, "clock-frequency", NULL) == NULL) + if (of_get_property(np, "clock-frequency", NULL) == NULL) + return -1; + + /* if reg-offset don't try to use it */ + if ((of_get_property(np, "reg-offset", NULL) != NULL)) + return -1; + + /* if rtas uses this device, don't try to use it as well */ + if (of_get_property(np, "used-by-rtas", NULL) != NULL) return -1; /* Get the address */ @@ -127,44 +185,64 @@ static int __init add_legacy_soc_port(struct device_node *np, return -1; addr = of_translate_address(soc_dev, addrp); + if (addr == OF_BAD_ADDR) + return -1; /* Add port, irq will be dealt with later. We passed a translated * IO port value. It will be fixed up later along with the irq */ - return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags); + if (tsi && !strcmp(tsi->type, "tsi-bridge")) + return add_legacy_port(np, -1, UPIO_TSI, addr, addr, + NO_IRQ, legacy_port_flags, 0); + else + return add_legacy_port(np, -1, UPIO_MEM, addr, addr, + NO_IRQ, legacy_port_flags, 0); } static int __init add_legacy_isa_port(struct device_node *np, struct device_node *isa_brg) { - u32 *reg; - char *typep; + const __be32 *reg; + const char *typep; int index = -1; - phys_addr_t taddr; + u64 taddr; + + DBG(" -> add_legacy_isa_port(%s)\n", np->full_name); /* Get the ISA port number */ - reg = (u32 *)get_property(np, "reg", NULL); + reg = of_get_property(np, "reg", NULL); if (reg == NULL) return -1; /* Verify it's an IO port, we don't support anything else */ - if (!(reg[0] & 0x00000001)) + if (!(be32_to_cpu(reg[0]) & 0x00000001)) return -1; /* Now look for an "ibm,aix-loc" property that gives us ordering * if any... */ - typep = (char *)get_property(np, "ibm,aix-loc", NULL); + typep = of_get_property(np, "ibm,aix-loc", NULL); /* If we have a location index, then use it */ if (typep && *typep == 'S') index = simple_strtol(typep+1, NULL, 0) - 1; - /* Translate ISA address */ - taddr = of_translate_address(np, reg); + /* Translate ISA address. If it fails, we still register the port + * with no translated address so that it can be picked up as an IO + * port later by the serial driver + * + * Note: Don't even try on P8 lpc, we know it's not directly mapped + */ + if (!of_device_is_compatible(isa_brg, "ibm,power8-lpc")) { + taddr = of_translate_address(np, reg); + if (taddr == OF_BAD_ADDR) + taddr = 0; + } else + taddr = 0; /* Add port, irq will be dealt with later */ - return add_legacy_port(np, index, UPIO_PORT, reg[1], taddr, NO_IRQ, UPF_BOOT_AUTOCONF); + return add_legacy_port(np, index, UPIO_PORT, be32_to_cpu(reg[1]), + taddr, NO_IRQ, legacy_port_flags, 0); } @@ -172,11 +250,13 @@ static int __init add_legacy_isa_port(struct device_node *np, static int __init add_legacy_pci_port(struct device_node *np, struct device_node *pci_dev) { - phys_addr_t addr, base; - u32 *addrp; + u64 addr, base; + const __be32 *addrp; unsigned int flags; int iotype, index = -1, lindex = 0; + DBG(" -> add_legacy_pci_port(%s)\n", np->full_name); + /* We only support ports that have a clock frequency properly * encoded in the device-tree (that is have an fcode). Anything * else can't be used that early and will be normally probed by @@ -184,7 +264,7 @@ static int __init add_legacy_pci_port(struct device_node *np, * compatible UARTs on PCI need all sort of quirks (port offsets * etc...) that this code doesn't know about */ - if (get_property(np, "clock-frequency", NULL) == NULL) + if (of_get_property(np, "clock-frequency", NULL) == NULL) return -1; /* Get the PCI address. Assume BAR 0 */ @@ -195,6 +275,8 @@ static int __init add_legacy_pci_port(struct device_node *np, /* We only support BAR 0 for now */ iotype = (flags & IORESOURCE_MEM) ? UPIO_MEM : UPIO_PORT; addr = of_translate_address(pci_dev, addrp); + if (addr == OF_BAD_ADDR) + return -1; /* Set the IO base to the same as the translated address for MMIO, * or to the domain local IO base for PIO (it will be fixed up later) @@ -202,15 +284,15 @@ static int __init add_legacy_pci_port(struct device_node *np, if (iotype == UPIO_MEM) base = addr; else - base = addrp[2]; + base = of_read_number(&addrp[2], 1); /* Try to guess an index... If we have subdevices of the pci dev, * we get to their "reg" property */ if (np != pci_dev) { - u32 *reg = (u32 *)get_property(np, "reg", NULL); - if (reg && (*reg < 4)) - index = lindex = *reg; + const __be32 *reg = of_get_property(np, "reg", NULL); + if (reg && (be32_to_cpup(reg) < 4)) + index = lindex = be32_to_cpup(reg); } /* Local index means it's the Nth port in the PCI chip. Unfortunately @@ -219,9 +301,9 @@ static int __init add_legacy_pci_port(struct device_node *np, * doesn't work for these settings, you'll have to add your own special * cases here */ - if (device_is_compatible(pci_dev, "pci13a8,152") || - device_is_compatible(pci_dev, "pci13a8,154") || - device_is_compatible(pci_dev, "pci13a8,158")) { + if (of_device_is_compatible(pci_dev, "pci13a8,152") || + of_device_is_compatible(pci_dev, "pci13a8,154") || + of_device_is_compatible(pci_dev, "pci13a8,158")) { addr += 0x200 * lindex; base += 0x200 * lindex; } else { @@ -232,25 +314,41 @@ static int __init add_legacy_pci_port(struct device_node *np, /* Add port, irq will be dealt with later. We passed a translated * IO port value. It will be fixed up later along with the irq */ - return add_legacy_port(np, index, iotype, base, addr, NO_IRQ, UPF_BOOT_AUTOCONF); + return add_legacy_port(np, index, iotype, base, addr, NO_IRQ, + legacy_port_flags, np != pci_dev); } #endif static void __init setup_legacy_serial_console(int console) { - struct legacy_serial_info *info = - &legacy_serial_infos[console]; + struct legacy_serial_info *info = &legacy_serial_infos[console]; + struct plat_serial8250_port *port = &legacy_serial_ports[console]; void __iomem *addr; + unsigned int stride; - if (info->taddr == 0) - return; - addr = ioremap(info->taddr, 0x1000); - if (addr == NULL) - return; + stride = 1 << port->regshift; + + /* Check if a translated MMIO address has been found */ + if (info->taddr) { + addr = ioremap(info->taddr, 0x1000); + if (addr == NULL) + return; + udbg_uart_init_mmio(addr, stride); + } else { + /* Check if it's PIO and we support untranslated PIO */ + if (port->iotype == UPIO_PORT && isa_io_special) + udbg_uart_init_pio(port->iobase, stride); + else + return; + } + + /* Try to query the current speed */ if (info->speed == 0) - info->speed = udbg_probe_uart_speed(addr, info->clock); + info->speed = udbg_probe_uart_speed(info->clock); + + /* Set it up */ DBG("default console speed = %d\n", info->speed); - udbg_init_uart(addr, info->speed, info->clock); + udbg_uart_setup(info->speed, info->clock); } /* @@ -265,13 +363,13 @@ static void __init setup_legacy_serial_console(int console) void __init find_legacy_serial_ports(void) { struct device_node *np, *stdout = NULL; - char *path; + const char *path; int index; DBG(" -> find_legacy_serial_port()\n"); /* Now find out if one of these is out firmware console */ - path = (char *)get_property(of_chosen, "linux,stdout-path", NULL); + path = of_get_property(of_chosen, "linux,stdout-path", NULL); if (path != NULL) { stdout = of_find_node_by_path(path); if (stdout) @@ -280,24 +378,31 @@ void __init find_legacy_serial_ports(void) DBG(" no linux,stdout-path !\n"); } - /* First fill our array with SOC ports */ - for (np = NULL; (np = of_find_compatible_node(np, "serial", "ns16550")) != NULL;) { - struct device_node *soc = of_get_parent(np); - if (soc && !strcmp(soc->type, "soc")) { - index = add_legacy_soc_port(np, np); - if (index >= 0 && np == stdout) - legacy_serial_console = index; + /* Iterate over all the 16550 ports, looking for known parents */ + for_each_compatible_node(np, "serial", "ns16550") { + struct device_node *parent = of_get_parent(np); + if (!parent) + continue; + if (of_match_node(legacy_serial_parents, parent) != NULL) { + if (of_device_is_available(np)) { + index = add_legacy_soc_port(np, np); + if (index >= 0 && np == stdout) + legacy_serial_console = index; + } } - of_node_put(soc); + of_node_put(parent); } - /* First fill our array with ISA ports */ - for (np = NULL; (np = of_find_node_by_type(np, "serial"));) { + /* Next, fill our array with ISA ports */ + for_each_node_by_type(np, "serial") { struct device_node *isa = of_get_parent(np); - if (isa && !strcmp(isa->name, "isa")) { - index = add_legacy_isa_port(np, isa); - if (index >= 0 && np == stdout) - legacy_serial_console = index; + if (isa && (!strcmp(isa->name, "isa") || + !strcmp(isa->name, "lpc"))) { + if (of_device_is_available(np)) { + index = add_legacy_isa_port(np, isa); + if (index >= 0 && np == stdout) + legacy_serial_console = index; + } } of_node_put(isa); } @@ -314,14 +419,14 @@ void __init find_legacy_serial_ports(void) of_node_put(parent); continue; } - /* Check for known pciclass, and also check wether we have + /* Check for known pciclass, and also check whether we have * a device with child nodes for ports or not */ - if (device_is_compatible(np, "pciclass,0700") || - device_is_compatible(np, "pciclass,070002")) + if (of_device_is_compatible(np, "pciclass,0700") || + of_device_is_compatible(np, "pciclass,070002")) pci = np; - else if (device_is_compatible(parent, "pciclass,0700") || - device_is_compatible(parent, "pciclass,070002")) + else if (of_device_is_compatible(parent, "pciclass,0700") || + of_device_is_compatible(parent, "pciclass,070002")) pci = parent; else { of_node_put(parent); @@ -352,27 +457,27 @@ static void __init fixup_port_irq(int index, struct device_node *np, struct plat_serial8250_port *port) { + unsigned int virq; + DBG("fixup_port_irq(%d)\n", index); - /* Check for interrupts in that node */ - if (np->n_intrs > 0) { - port->irq = np->intrs[0].line; - DBG(" port %d (%s), irq=%d\n", - index, np->full_name, port->irq); - return; + virq = irq_of_parse_and_map(np, 0); + if (virq == NO_IRQ && legacy_serial_infos[index].irq_check_parent) { + np = of_get_parent(np); + if (np == NULL) + return; + virq = irq_of_parse_and_map(np, 0); + of_node_put(np); } - - /* Check for interrupts in the parent */ - np = of_get_parent(np); - if (np == NULL) + if (virq == NO_IRQ) return; - if (np->n_intrs > 0) { - port->irq = np->intrs[0].line; - DBG(" port %d (%s), irq=%d\n", - index, np->full_name, port->irq); - } - of_node_put(np); + port->irq = virq; + +#ifdef CONFIG_SERIAL_8250_FSL + if (of_device_is_compatible(np, "fsl,ns16550")) + port->handle_irq = fsl8250_handle_irq; +#endif } static void __init fixup_port_pio(int index, @@ -429,8 +534,8 @@ static int __init serial_dev_init(void) return -ENODEV; /* - * Before we register the platfrom serial devices, we need - * to fixup their interrutps and their IO ports. + * Before we register the platform serial devices, we need + * to fixup their interrupts and their IO ports. */ DBG("Fixing serial ports interrupts and IO ports ...\n"); @@ -442,7 +547,7 @@ static int __init serial_dev_init(void) fixup_port_irq(i, np, port); if (port->iotype == UPIO_PORT) fixup_port_pio(i, np, port); - if (port->iotype == UPIO_MEM) + if ((port->iotype == UPIO_MEM) || (port->iotype == UPIO_TSI)) fixup_port_mmio(i, np, port); } @@ -450,28 +555,28 @@ static int __init serial_dev_init(void) return platform_device_register(&serial_device); } -arch_initcall(serial_dev_init); +device_initcall(serial_dev_init); +#ifdef CONFIG_SERIAL_8250_CONSOLE /* * This is called very early, as part of console_init() (typically just after * time_init()). This function is respondible for trying to find a good * default console on serial ports. It tries to match the open firmware - * default output with one of the available serial console drivers, either - * one of the platform serial ports that have been probed earlier by - * find_legacy_serial_ports() or some more platform specific ones. + * default output with one of the available serial console drivers that have + * been probed earlier by find_legacy_serial_ports() */ static int __init check_legacy_serial_console(void) { struct device_node *prom_stdout = NULL; - int speed = 0, offset = 0; - char *name; - u32 *spd; + int i, speed = 0, offset = 0; + const char *name; + const __be32 *spd; DBG(" -> check_legacy_serial_console()\n"); /* The user has requested a console so this is already set up. */ - if (strstr(saved_command_line, "console=")) { + if (strstr(boot_command_line, "console=")) { DBG(" console was specified !\n"); return -EBUSY; } @@ -487,7 +592,7 @@ static int __init check_legacy_serial_console(void) } /* We are getting a weird phandle from OF ... */ /* ... So use the full path instead */ - name = (char *)get_property(of_chosen, "linux,stdout-path", NULL); + name = of_get_property(of_chosen, "linux,stdout-path", NULL); if (name == NULL) { DBG(" no linux,stdout-path !\n"); return -ENODEV; @@ -499,40 +604,29 @@ static int __init check_legacy_serial_console(void) } DBG("stdout is %s\n", prom_stdout->full_name); - name = (char *)get_property(prom_stdout, "name", NULL); + name = of_get_property(prom_stdout, "name", NULL); if (!name) { DBG(" stdout package has no name !\n"); goto not_found; } - spd = (u32 *)get_property(prom_stdout, "current-speed", NULL); + spd = of_get_property(prom_stdout, "current-speed", NULL); if (spd) - speed = *spd; + speed = be32_to_cpup(spd); - if (0) - ; -#ifdef CONFIG_SERIAL_8250_CONSOLE - else if (strcmp(name, "serial") == 0) { - int i; - /* Look for it in probed array */ - for (i = 0; i < legacy_serial_count; i++) { - if (prom_stdout != legacy_serial_infos[i].np) - continue; - offset = i; - speed = legacy_serial_infos[i].speed; - break; - } - if (i >= legacy_serial_count) - goto not_found; + if (strcmp(name, "serial") != 0) + goto not_found; + + /* Look for it in probed array */ + for (i = 0; i < legacy_serial_count; i++) { + if (prom_stdout != legacy_serial_infos[i].np) + continue; + offset = i; + speed = legacy_serial_infos[i].speed; + break; } -#endif /* CONFIG_SERIAL_8250_CONSOLE */ -#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE - else if (strcmp(name, "ch-a") == 0) - offset = 0; - else if (strcmp(name, "ch-b") == 0) - offset = 1; -#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ - else + if (i >= legacy_serial_count) goto not_found; + of_node_put(prom_stdout); DBG("Found serial console at ttyS%d\n", offset); @@ -551,3 +645,4 @@ static int __init check_legacy_serial_console(void) } console_initcall(check_legacy_serial_console); +#endif /* CONFIG_SERIAL_8250_CONSOLE */ |