1 files changed, 149 insertions, 0 deletions
diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h
new file mode 100644
index 00000000000..854ab713f56
--- /dev/null
+++ b/arch/powerpc/include/asm/ppc-pci.h
@@ -0,0 +1,149 @@
+/*
+ * c 2001 PPC 64 Team, IBM Corp
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_POWERPC_PPC_PCI_H
+#define _ASM_POWERPC_PPC_PCI_H
+#ifdef __KERNEL__
+
+#ifdef CONFIG_PCI
+
+#include <linux/pci.h>
+#include <asm/pci-bridge.h>
+
+extern unsigned long isa_io_base;
+
+extern void pci_setup_phb_io(struct pci_controller *hose, int primary);
+extern void pci_setup_phb_io_dynamic(struct pci_controller *hose, int primary);
+
+
+extern struct list_head hose_list;
+
+extern void find_and_init_phbs(void);
+
+extern struct pci_dev *isa_bridge_pcidev;	/* may be NULL if no ISA bus */
+
+/** Bus Unit ID macros; get low and hi 32-bits of the 64-bit BUID */
+#define BUID_HI(buid) ((buid) >> 32)
+#define BUID_LO(buid) ((buid) & 0xffffffff)
+
+/* PCI device_node operations */
+struct device_node;
+typedef void *(*traverse_func)(struct device_node *me, void *data);
+void *traverse_pci_devices(struct device_node *start, traverse_func pre,
+		void *data);
+
+extern void pci_devs_phb_init(void);
+extern void pci_devs_phb_init_dynamic(struct pci_controller *phb);
+extern void scan_phb(struct pci_controller *hose);
+
+/* From rtas_pci.h */
+extern void init_pci_config_tokens (void);
+extern unsigned long get_phb_buid (struct device_node *);
+extern int rtas_setup_phb(struct pci_controller *phb);
+
+extern unsigned long pci_probe_only;
+
+/* ---- EEH internal-use-only related routines ---- */
+#ifdef CONFIG_EEH
+
+void pci_addr_cache_insert_device(struct pci_dev *dev);
+void pci_addr_cache_remove_device(struct pci_dev *dev);
+void pci_addr_cache_build(void);
+struct pci_dev *pci_get_device_by_addr(unsigned long addr);
+
+/**
+ * eeh_slot_error_detail -- record and EEH error condition to the log
+ * @pdn:      pci device node
+ * @severity: EEH_LOG_TEMP_FAILURE or EEH_LOG_PERM_FAILURE
+ *
+ * Obtains the EEH error details from the RTAS subsystem,
+ * and then logs these details with the RTAS error log system.
+ */
+#define EEH_LOG_TEMP_FAILURE 1
+#define EEH_LOG_PERM_FAILURE 2
+void eeh_slot_error_detail (struct pci_dn *pdn, int severity);
+
+/**
+ * rtas_pci_enable - enable IO transfers for this slot
+ * @pdn:       pci device node
+ * @function:  either EEH_THAW_MMIO or EEH_THAW_DMA 
+ *
+ * Enable I/O transfers to this slot 
+ */
+#define EEH_THAW_MMIO 2
+#define EEH_THAW_DMA  3
+int rtas_pci_enable(struct pci_dn *pdn, int function);
+
+/**
+ * rtas_set_slot_reset -- unfreeze a frozen slot
+ * @pdn:       pci device node
+ *
+ * Clear the EEH-frozen condition on a slot.  This routine
+ * does this by asserting the PCI #RST line for 1/8th of
+ * a second; this routine will sleep while the adapter is
+ * being reset.
+ *
+ * Returns a non-zero value if the reset failed.
+ */
+int rtas_set_slot_reset (struct pci_dn *);
+int eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs);
+
+/** 
+ * eeh_restore_bars - Restore device configuration info.
+ * @pdn:       pci device node
+ *
+ * A reset of a PCI device will clear out its config space.
+ * This routines will restore the config space for this
+ * device, and is children, to values previously obtained
+ * from the firmware.
+ */
+void eeh_restore_bars(struct pci_dn *);
+
+/**
+ * rtas_configure_bridge -- firmware initialization of pci bridge
+ * @pdn:       pci device node
+ *
+ * Ask the firmware to configure all PCI bridges devices
+ * located behind the indicated node. Required after a
+ * pci device reset. Does essentially the same hing as
+ * eeh_restore_bars, but for brdges, and lets firmware 
+ * do the work.
+ */
+void rtas_configure_bridge(struct pci_dn *);
+
+int rtas_write_config(struct pci_dn *, int where, int size, u32 val);
+int rtas_read_config(struct pci_dn *, int where, int size, u32 *val);
+
+/**
+ * eeh_mark_slot -- set mode flags for pertition endpoint
+ * @pdn:       pci device node
+ *
+ * mark and clear slots: find "partition endpoint" PE and set or 
+ * clear the flags for each subnode of the PE.
+ */
+void eeh_mark_slot (struct device_node *dn, int mode_flag);
+void eeh_clear_slot (struct device_node *dn, int mode_flag);
+
+/**
+ * find_device_pe -- Find the associated "Partiationable Endpoint" PE
+ * @pdn:       pci device node
+ */
+struct device_node * find_device_pe(struct device_node *dn);
+
+void eeh_sysfs_add_device(struct pci_dev *pdev);
+void eeh_sysfs_remove_device(struct pci_dev *pdev);
+
+#endif /* CONFIG_EEH */
+
+#else /* CONFIG_PCI */
+static inline void find_and_init_phbs(void) { }
+static inline void init_pci_config_tokens(void) { }
+#endif /* !CONFIG_PCI */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_PPC_PCI_H */