aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/boot
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/boot')
-rw-r--r--arch/powerpc/boot/Makefile9
-rw-r--r--arch/powerpc/boot/dts/iss4xx-mpic.dts155
-rw-r--r--arch/powerpc/boot/dts/iss4xx.dts116
-rw-r--r--arch/powerpc/boot/dts/mpc8315erdb.dts16
-rw-r--r--arch/powerpc/boot/dts/mpc8377_rdb.dts14
-rw-r--r--arch/powerpc/boot/dts/mpc8378_rdb.dts14
-rw-r--r--arch/powerpc/boot/dts/mpc8379_rdb.dts14
-rw-r--r--arch/powerpc/boot/dts/p1020rdb.dts125
-rw-r--r--arch/powerpc/boot/treeboot-iss4xx.c56
-rwxr-xr-xarch/powerpc/boot/wrapper9
10 files changed, 523 insertions, 5 deletions
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index bb2465bcb32..ad0df7d0a64 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -44,6 +44,7 @@ $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
+$(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405
$(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
@@ -77,7 +78,7 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c
cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c \
- gamecube-head.S gamecube.c wii-head.S wii.c
+ gamecube-head.S gamecube.c wii-head.S wii.c treeboot-iss4xx.c
src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -169,7 +170,7 @@ quiet_cmd_wrap = WRAP $@
$(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) vmlinux
image-$(CONFIG_PPC_PSERIES) += zImage.pseries
-image-$(CONFIG_PPC_MAPLE) += zImage.pseries
+image-$(CONFIG_PPC_MAPLE) += zImage.maple
image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries
image-$(CONFIG_PPC_PS3) += dtbImage.ps3
image-$(CONFIG_PPC_CELLEB) += zImage.pseries
@@ -206,6 +207,8 @@ image-$(CONFIG_TAISHAN) += cuImage.taishan
image-$(CONFIG_KATMAI) += cuImage.katmai
image-$(CONFIG_WARP) += cuImage.warp
image-$(CONFIG_YOSEMITE) += cuImage.yosemite
+image-$(CONFIG_ISS4xx) += treeImage.iss4xx \
+ treeImage.iss4xx-mpic
# Board ports in arch/powerpc/platform/8xx/Kconfig
image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads
@@ -351,7 +354,7 @@ install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
zImage.iseries zImage.miboot zImage.pmac zImage.pseries \
- simpleImage.* otheros.bld *.dtb
+ zImage.maple simpleImage.* otheros.bld *.dtb
# clean up files cached by wrapper
clean-kernel := vmlinux.strip vmlinux.bin
diff --git a/arch/powerpc/boot/dts/iss4xx-mpic.dts b/arch/powerpc/boot/dts/iss4xx-mpic.dts
new file mode 100644
index 00000000000..23e9d9b7e40
--- /dev/null
+++ b/arch/powerpc/boot/dts/iss4xx-mpic.dts
@@ -0,0 +1,155 @@
+/*
+ * Device Tree Source for IBM Embedded PPC 476 Platform
+ *
+ * Copyright 2010 Torez Smith, IBM Corporation.
+ *
+ * Based on earlier code:
+ * Copyright (c) 2006, 2007 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x01f00000 0x00100000;
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ model = "ibm,iss-4xx";
+ compatible = "ibm,iss-4xx";
+ dcr-parent = <&{/cpus/cpu@0}>;
+
+ aliases {
+ serial0 = &UART0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,4xx"; // real CPU changed in sim
+ reg = <0>;
+ clock-frequency = <100000000>; // 100Mhz :-)
+ timebase-frequency = <100000000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ status = "ok";
+ };
+ cpu@1 {
+ device_type = "cpu";
+ model = "PowerPC,4xx"; // real CPU changed in sim
+ reg = <1>;
+ clock-frequency = <100000000>; // 100Mhz :-)
+ timebase-frequency = <100000000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ status = "disabled";
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x01f00100>;
+ };
+ cpu@2 {
+ device_type = "cpu";
+ model = "PowerPC,4xx"; // real CPU changed in sim
+ reg = <2>;
+ clock-frequency = <100000000>; // 100Mhz :-)
+ timebase-frequency = <100000000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ status = "disabled";
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x01f00200>;
+ };
+ cpu@3 {
+ device_type = "cpu";
+ model = "PowerPC,4xx"; // real CPU changed in sim
+ reg = <3>;
+ clock-frequency = <100000000>; // 100Mhz :-)
+ timebase-frequency = <100000000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ status = "disabled";
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x01f00300>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
+
+ };
+
+ MPIC: interrupt-controller {
+ compatible = "chrp,open-pic";
+ interrupt-controller;
+ dcr-reg = <0xffc00000 0x00030000>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+
+ };
+
+ plb {
+ compatible = "ibm,plb-4xx", "ibm,plb4"; /* Could be PLB6, doesn't matter */
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; // Filled in by zImage
+
+ POB0: opb {
+ compatible = "ibm,opb-4xx", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /* Wish there was a nicer way of specifying a full 32-bit
+ range */
+ ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+ 0x80000000 0x00000001 0x80000000 0x80000000>;
+ clock-frequency = <0>; // Filled in by zImage
+ UART0: serial@40000200 {
+ device_type = "serial";
+ compatible = "ns16550a";
+ reg = <0x40000200 0x00000008>;
+ virtual-reg = <0xe0000200>;
+ clock-frequency = <11059200>;
+ current-speed = <115200>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <0x0 0x2>;
+ };
+ };
+ };
+
+ nvrtc {
+ compatible = "ds1743-nvram", "ds1743", "rtc-ds1743";
+ reg = <0 0xEF703000 0x2000>;
+ };
+ iss-block {
+ compatible = "ibm,iss-sim-block-device";
+ reg = <0 0xEF701000 0x1000>;
+ };
+
+ chosen {
+ linux,stdout-path = "/plb/opb/serial@40000200";
+ };
+};
diff --git a/arch/powerpc/boot/dts/iss4xx.dts b/arch/powerpc/boot/dts/iss4xx.dts
new file mode 100644
index 00000000000..4ff6555c866
--- /dev/null
+++ b/arch/powerpc/boot/dts/iss4xx.dts
@@ -0,0 +1,116 @@
+/*
+ * Device Tree Source for IBM Embedded PPC 476 Platform
+ *
+ * Copyright 2010 Torez Smith, IBM Corporation.
+ *
+ * Based on earlier code:
+ * Copyright (c) 2006, 2007 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ model = "ibm,iss-4xx";
+ compatible = "ibm,iss-4xx";
+ dcr-parent = <&{/cpus/cpu@0}>;
+
+ aliases {
+ serial0 = &UART0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,4xx"; // real CPU changed in sim
+ reg = <0x00000000>;
+ clock-frequency = <100000000>; // 100Mhz :-)
+ timebase-frequency = <100000000>;
+ i-cache-line-size = <32>; // may need fixup in sim
+ d-cache-line-size = <32>; // may need fixup in sim
+ i-cache-size = <32768>; /* may need fixup in sim */
+ d-cache-size = <32768>; /* may need fixup in sim */
+ dcr-controller;
+ dcr-access-method = "native";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
+ };
+
+ UIC0: interrupt-controller0 {
+ compatible = "ibm,uic-4xx", "ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0x0c0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic-4xx", "ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0x0d0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ plb {
+ compatible = "ibm,plb-4xx", "ibm,plb4"; /* Could be PLB6, doesn't matter */
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; // Filled in by zImage
+
+ POB0: opb {
+ compatible = "ibm,opb-4xx", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /* Wish there was a nicer way of specifying a full 32-bit
+ range */
+ ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+ 0x80000000 0x00000001 0x80000000 0x80000000>;
+ clock-frequency = <0>; // Filled in by zImage
+ UART0: serial@40000200 {
+ device_type = "serial";
+ compatible = "ns16550a";
+ reg = <0x40000200 0x00000008>;
+ virtual-reg = <0xe0000200>;
+ clock-frequency = <11059200>;
+ current-speed = <115200>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x0 0x4>;
+ };
+ };
+ };
+
+ nvrtc {
+ compatible = "ds1743-nvram", "ds1743", "rtc-ds1743";
+ reg = <0 0xEF703000 0x2000>;
+ };
+ iss-block {
+ compatible = "ibm,iss-sim-block-device";
+ reg = <0 0xEF701000 0x1000>;
+ };
+
+ chosen {
+ linux,stdout-path = "/plb/opb/serial@40000200";
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts
index 8a3a4f3ef83..4dd08c32297 100644
--- a/arch/powerpc/boot/dts/mpc8315erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8315erdb.dts
@@ -292,7 +292,7 @@
fsl,num-channels = <4>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x97c>;
- fsl,descriptor-types-mask = <0x3ab0abf>;
+ fsl,descriptor-types-mask = <0x3a30abf>;
};
sata@18000 {
@@ -463,4 +463,18 @@
0 0x00800000>;
};
};
+
+ leds {
+ compatible = "gpio-leds";
+
+ pwr {
+ gpios = <&mcu_pio 0 0>;
+ default-state = "on";
+ };
+
+ hdd {
+ gpios = <&mcu_pio 1 0>;
+ linux,default-trigger = "ide-disk";
+ };
+ };
};
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index 9e2264b1000..dbc1b988b29 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -486,4 +486,18 @@
0 0x00800000>;
};
};
+
+ leds {
+ compatible = "gpio-leds";
+
+ pwr {
+ gpios = <&mcu_pio 0 0>;
+ default-state = "on";
+ };
+
+ hdd {
+ gpios = <&mcu_pio 1 0>;
+ linux,default-trigger = "ide-disk";
+ };
+ };
};
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 4e6a1a407bb..3447eb9f6e8 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -470,4 +470,18 @@
0 0x00800000>;
};
};
+
+ leds {
+ compatible = "gpio-leds";
+
+ pwr {
+ gpios = <&mcu_pio 0 0>;
+ default-state = "on";
+ };
+
+ hdd {
+ gpios = <&mcu_pio 1 0>;
+ linux,default-trigger = "ide-disk";
+ };
+ };
};
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index 72336d50452..15560c619b0 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -436,4 +436,18 @@
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
+
+ leds {
+ compatible = "gpio-leds";
+
+ pwr {
+ gpios = <&mcu_pio 0 0>;
+ default-state = "on";
+ };
+
+ hdd {
+ gpios = <&mcu_pio 1 0>;
+ linux,default-trigger = "ide-disk";
+ };
+ };
};
diff --git a/arch/powerpc/boot/dts/p1020rdb.dts b/arch/powerpc/boot/dts/p1020rdb.dts
index df5269093af..22f64b62d7f 100644
--- a/arch/powerpc/boot/dts/p1020rdb.dts
+++ b/arch/powerpc/boot/dts/p1020rdb.dts
@@ -19,6 +19,9 @@
aliases {
serial0 = &serial0;
serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
pci0 = &pci0;
pci1 = &pci1;
};
@@ -346,6 +349,122 @@
};
};
+ mdio@24000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,etsec2-mdio";
+ reg = <0x24000 0x1000 0xb0030 0x4>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <3 1>;
+ reg = <0x0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <2 1>;
+ reg = <0x1>;
+ };
+ };
+
+ mdio@25000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,etsec2-tbi";
+ reg = <0x25000 0x1000 0xb1030 0x4>;
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet0: ethernet@b0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "fsl,etsec2";
+ fsl,num_rx_queues = <0x8>;
+ fsl,num_tx_queues = <0x8>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupt-parent = <&mpic>;
+ fixed-link = <1 1 1000 0 0>;
+ phy-connection-type = "rgmii-id";
+
+ queue-group@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb0000 0x1000>;
+ interrupts = <29 2 30 2 34 2>;
+ };
+
+ queue-group@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb4000 0x1000>;
+ interrupts = <17 2 18 2 24 2>;
+ };
+ };
+
+ enet1: ethernet@b1000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "fsl,etsec2";
+ fsl,num_rx_queues = <0x8>;
+ fsl,num_tx_queues = <0x8>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy0>;
+ tbi-handle = <&tbi0>;
+ phy-connection-type = "sgmii";
+
+ queue-group@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb1000 0x1000>;
+ interrupts = <35 2 36 2 40 2>;
+ };
+
+ queue-group@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb5000 0x1000>;
+ interrupts = <51 2 52 2 67 2>;
+ };
+ };
+
+ enet2: ethernet@b2000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "fsl,etsec2";
+ fsl,num_rx_queues = <0x8>;
+ fsl,num_tx_queues = <0x8>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+
+ queue-group@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb2000 0x1000>;
+ interrupts = <31 2 32 2 33 2>;
+ };
+
+ queue-group@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb6000 0x1000>;
+ interrupts = <25 2 26 2 27 2>;
+ };
+ };
+
usb@22000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -356,6 +475,11 @@
phy_type = "ulpi";
};
+ /* USB2 is shared with localbus, so it must be disabled
+ by default. We can't put 'status = "disabled";' here
+ since U-Boot doesn't clear the status property when
+ it enables USB2. OTOH, U-Boot does create a new node
+ when there isn't any. So, just comment it out.
usb@23000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -365,6 +489,7 @@
interrupts = <46 0x2>;
phy_type = "ulpi";
};
+ */
sdhci@2e000 {
compatible = "fsl,p1020-esdhc", "fsl,esdhc";
diff --git a/arch/powerpc/boot/treeboot-iss4xx.c b/arch/powerpc/boot/treeboot-iss4xx.c
new file mode 100644
index 00000000000..fcc44952874
--- /dev/null
+++ b/arch/powerpc/boot/treeboot-iss4xx.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright 2010 Ben. Herrenschmidt, IBM Corporation.
+ *
+ * Based on earlier code:
+ * Copyright (C) Paul Mackerras 1997.
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2002-2005 MontaVista Software Inc.
+ *
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2003, 2004 Zultys Technologies
+ *
+ * Copyright 2007 David Gibson, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <stdarg.h>
+#include <stddef.h>
+#include "types.h"
+#include "elf.h"
+#include "string.h"
+#include "stdio.h"
+#include "page.h"
+#include "ops.h"
+#include "reg.h"
+#include "io.h"
+#include "dcr.h"
+#include "4xx.h"
+#include "44x.h"
+#include "libfdt.h"
+
+BSS_STACK(4096);
+
+static void iss_4xx_fixups(void)
+{
+ ibm4xx_sdram_fixup_memsize();
+}
+
+#define SPRN_PIR 0x11E /* Processor Indentification Register */
+void platform_init(void)
+{
+ unsigned long end_of_ram = 0x08000000;
+ unsigned long avail_ram = end_of_ram - (unsigned long)_end;
+ u32 pir_reg;
+
+ simple_alloc_init(_end, avail_ram, 128, 64);
+ platform_ops.fixups = iss_4xx_fixups;
+ platform_ops.exit = ibm44x_dbcr_reset;
+ pir_reg = mfspr(SPRN_PIR);
+ fdt_set_boot_cpuid_phys(_dtb_start, pir_reg);
+ fdt_init(_dtb_start);
+ serial_console_init();
+}
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index f4594ed09a2..cb97e7511d7 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -149,6 +149,10 @@ pseries)
platformo=$object/of.o
link_address='0x4000000'
;;
+maple)
+ platformo=$object/of.o
+ link_address='0x400000'
+ ;;
pmac|chrp)
platformo=$object/of.o
;;
@@ -237,6 +241,9 @@ gamecube|wii)
link_address='0x600000'
platformo="$object/$platform-head.o $object/$platform.o"
;;
+treeboot-iss4xx-mpic)
+ platformo="$object/treeboot-iss4xx.o"
+ ;;
esac
vmz="$tmpdir/`basename \"$kernel\"`.$ext"
@@ -321,7 +328,7 @@ fi
# post-processing needed for some platforms
case "$platform" in
-pseries|chrp)
+pseries|chrp|maple)
$objbin/addnote "$ofile"
;;
coff)
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-19 02:57:15 +0000