aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/boot
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/boot')
-rw-r--r--arch/powerpc/boot/Makefile4
-rw-r--r--arch/powerpc/boot/dts/mpc836x_mds.dts43
-rw-r--r--arch/powerpc/boot/dts/mpc836x_rdk.dts19
-rw-r--r--arch/powerpc/boot/dts/mpc8641_hpcn.dts56
-rw-r--r--arch/powerpc/boot/dts/sequoia.dts2
-rw-r--r--arch/powerpc/boot/install.sh14
6 files changed, 106 insertions, 32 deletions
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index f32829937aa..e84df338ea2 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -208,7 +208,7 @@ image-$(CONFIG_DEFAULT_UIMAGE) += uImage
#
# Theses are default targets to build images which embed device tree blobs.
# They are only required on boards which do not have FDT support in firmware.
-# Boards with newish u-boot firmare can use the uImage target above
+# Boards with newish u-boot firmware can use the uImage target above
#
# Board ports in arch/powerpc/platform/40x/Kconfig
@@ -356,7 +356,7 @@ $(obj)/zImage.initrd: $(addprefix $(obj)/, $(initrd-y))
@rm -f $@; ln $< $@
install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
- sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $<
+ sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $^
# anything not in $(targets)
clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 14534d04e4d..6e34f170fa6 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -69,8 +69,18 @@
};
bcsr@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "fsl,mpc8360mds-bcsr";
reg = <1 0 0x8000>;
+ ranges = <0 1 0 0x8000>;
+
+ bcsr13: gpio-controller@d {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8360mds-bcsr-gpio";
+ reg = <0xd 1>;
+ gpio-controller;
+ };
};
};
@@ -195,10 +205,21 @@
};
par_io@1400 {
+ #address-cells = <1>;
+ #size-cells = <1>;
reg = <0x1400 0x100>;
+ ranges = <0 0x1400 0x100>;
device_type = "par_io";
num-ports = <7>;
+ qe_pio_b: gpio-controller@18 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8360-qe-pario-bank",
+ "fsl,mpc8323-qe-pario-bank";
+ reg = <0x18 0x18>;
+ gpio-controller;
+ };
+
pio1: ucc_pin@01 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
@@ -282,6 +303,15 @@
};
};
+ timer@440 {
+ compatible = "fsl,mpc8360-qe-gtm",
+ "fsl,qe-gtm", "fsl,gtm";
+ reg = <0x440 0x40>;
+ clock-frequency = <132000000>;
+ interrupts = <12 13 14 15>;
+ interrupt-parent = <&qeic>;
+ };
+
spi@4c0 {
cell-index = <0>;
compatible = "fsl,spi";
@@ -301,11 +331,20 @@
};
usb@6c0 {
- compatible = "qe_udc";
+ compatible = "fsl,mpc8360-qe-usb",
+ "fsl,mpc8323-qe-usb";
reg = <0x6c0 0x40 0x8b00 0x100>;
interrupts = <11>;
interrupt-parent = <&qeic>;
- mode = "slave";
+ fsl,fullspeed-clock = "clk21";
+ fsl,lowspeed-clock = "brg9";
+ gpios = <&qe_pio_b 2 0 /* USBOE */
+ &qe_pio_b 3 0 /* USBTP */
+ &qe_pio_b 8 0 /* USBTN */
+ &qe_pio_b 9 0 /* USBRP */
+ &qe_pio_b 11 0 /* USBRN */
+ &bcsr13 5 0 /* SPEED */
+ &bcsr13 4 1>; /* POWER */
};
enet0: ucc@2000 {
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
index decadf3d9e9..37b789510d6 100644
--- a/arch/powerpc/boot/dts/mpc836x_rdk.dts
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -218,8 +218,23 @@
reg = <0x440 0x40>;
interrupts = <12 13 14 15>;
interrupt-parent = <&qeic>;
- /* filled by u-boot */
- clock-frequency = <0>;
+ clock-frequency = <166666666>;
+ };
+
+ usb@6c0 {
+ compatible = "fsl,mpc8360-qe-usb",
+ "fsl,mpc8323-qe-usb";
+ reg = <0x6c0 0x40 0x8b00 0x100>;
+ interrupts = <11>;
+ interrupt-parent = <&qeic>;
+ fsl,fullspeed-clock = "clk21";
+ gpios = <&qe_pio_b 2 0 /* USBOE */
+ &qe_pio_b 3 0 /* USBTP */
+ &qe_pio_b 8 0 /* USBTN */
+ &qe_pio_b 9 0 /* USBRP */
+ &qe_pio_b 11 0 /* USBRN */
+ &qe_pio_e 20 0 /* SPEED */
+ &qe_pio_e 21 1 /* POWER */>;
};
spi@4c0 {
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index 35d5e248ccd..4481532cbe7 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -26,7 +26,13 @@
serial1 = &serial1;
pci0 = &pci0;
pci1 = &pci1;
- rapidio0 = &rapidio0;
+/*
+ * Only one of Rapid IO or PCI can be present due to HW limitations and
+ * due to the fact that the 2 now share address space in the new memory
+ * map. The most likely case is that we have PCI, so comment out the
+ * rapidio node. Leave it here for reference.
+ */
+ /* rapidio0 = &rapidio0; */
};
cpus {
@@ -62,18 +68,17 @@
reg = <0x00000000 0x40000000>; // 1G at 0x0
};
- localbus@f8005000 {
+ localbus@ffe05000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8641-localbus", "simple-bus";
- reg = <0xf8005000 0x1000>;
+ reg = <0xffe05000 0x1000>;
interrupts = <19 2>;
interrupt-parent = <&mpic>;
- ranges = <0 0 0xff800000 0x00800000
- 1 0 0xfe000000 0x01000000
- 2 0 0xf8200000 0x00100000
- 3 0 0xf8100000 0x00100000>;
+ ranges = <0 0 0xef800000 0x00800000
+ 2 0 0xffdf8000 0x00008000
+ 3 0 0xffdf0000 0x00008000>;
flash@0,0 {
compatible = "cfi-flash";
@@ -103,13 +108,13 @@
};
};
- soc8641@f8000000 {
+ soc8641@ffe00000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
- ranges = <0x00000000 0xf8000000 0x00100000>;
- reg = <0xf8000000 0x00001000>; // CCSRBAR
+ ranges = <0x00000000 0xffe00000 0x00100000>;
+ reg = <0xffe00000 0x00001000>; // CCSRBAR
bus-frequency = <0>;
i2c@3000 {
@@ -340,17 +345,17 @@
};
};
- pci0: pcie@f8008000 {
+ pci0: pcie@ffe08000 {
cell-index = <0>;
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0xf8008000 0x1000>;
+ reg = <0xffe08000 0x1000>;
bus-range = <0x0 0xff>;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
- 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+ 0x01000000 0x0 0x00000000 0xffc00000 0x0 0x00010000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <24 2>;
@@ -481,7 +486,7 @@
0x01000000 0x0 0x00000000
0x01000000 0x0 0x00000000
- 0x0 0x00100000>;
+ 0x0 0x00010000>;
uli1575@0 {
reg = <0 0 0 0 0>;
#size-cells = <2>;
@@ -491,7 +496,7 @@
0x0 0x20000000
0x01000000 0x0 0x00000000
0x01000000 0x0 0x00000000
- 0x0 0x00100000>;
+ 0x0 0x00010000>;
isa@1e {
device_type = "isa";
#interrupt-cells = <2>;
@@ -549,17 +554,17 @@
};
- pci1: pcie@f8009000 {
+ pci1: pcie@ffe09000 {
cell-index = <1>;
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0xf8009000 0x1000>;
+ reg = <0xffe09000 0x1000>;
bus-range = <0 0xff>;
ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
- 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
+ 0x01000000 0x0 0x00000000 0xffc10000 0x0 0x00010000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <25 2>;
@@ -582,18 +587,21 @@
0x01000000 0x0 0x00000000
0x01000000 0x0 0x00000000
- 0x0 0x00100000>;
+ 0x0 0x00010000>;
};
};
- rapidio0: rapidio@f80c0000 {
+/*
+ rapidio0: rapidio@ffec0000 {
#address-cells = <2>;
#size-cells = <2>;
compatible = "fsl,rapidio-delta";
- reg = <0xf80c0000 0x20000>;
- ranges = <0 0 0xc0000000 0 0x20000000>;
+ reg = <0xffec0000 0x20000>;
+ ranges = <0 0 0x80000000 0 0x20000000>;
interrupt-parent = <&mpic>;
- /* err_irq bell_outb_irq bell_inb_irq
- msg1_tx_irq msg1_rx_irq msg2_tx_irq msg2_rx_irq */
+ // err_irq bell_outb_irq bell_inb_irq
+ // msg1_tx_irq msg1_rx_irq msg2_tx_irq msg2_rx_irq
interrupts = <48 2 49 2 50 2 53 2 54 2 55 2 56 2>;
};
+*/
+
};
diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts
index 3b295e8df53..43cc68bd319 100644
--- a/arch/powerpc/boot/dts/sequoia.dts
+++ b/arch/powerpc/boot/dts/sequoia.dts
@@ -134,7 +134,7 @@
};
USB1: usb@e0000400 {
- compatible = "ohci-be";
+ compatible = "ibm,usb-ohci-440epx", "ohci-be";
reg = <0x00000000 0xe0000400 0x00000060>;
interrupt-parent = <&UIC0>;
interrupts = <0x15 0x8>;
diff --git a/arch/powerpc/boot/install.sh b/arch/powerpc/boot/install.sh
index b002bfd5678..51b2387bdba 100644
--- a/arch/powerpc/boot/install.sh
+++ b/arch/powerpc/boot/install.sh
@@ -15,7 +15,7 @@
# $2 - kernel image file
# $3 - kernel map file
# $4 - default install path (blank if root directory)
-# $5 - kernel boot file, the zImage
+# $5 and more - kernel boot files; zImage*, uImage, cuImage.*, etc.
#
# User may have a custom install script
@@ -38,3 +38,15 @@ fi
cat $2 > $4/$image_name
cp $3 $4/System.map
+
+# Copy all the bootable image files
+path=$4
+shift 4
+while [ $# -ne 0 ]; do
+ image_name=`basename $1`
+ if [ -f $path/$image_name ]; then
+ mv $path/$image_name $path/$image_name.old
+ fi
+ cat $1 > $path/$image_name
+ shift
+done;
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-14 10:34:21 +0000