diff options
Diffstat (limited to 'arch/powerpc/boot/dts/pcm030.dts')
| -rw-r--r-- | arch/powerpc/boot/dts/pcm030.dts | 196 |
1 files changed, 19 insertions, 177 deletions
diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts index 8a4ec30b21a..9e354997eb7 100644 --- a/arch/powerpc/boot/dts/pcm030.dts +++ b/arch/powerpc/boot/dts/pcm030.dts @@ -12,246 +12,92 @@ * option) any later version. */ -/dts-v1/; +/include/ "mpc5200b.dtsi" / { model = "phytec,pcm030"; compatible = "phytec,pcm030"; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&mpc5200_pic>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,5200@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <32>; - i-cache-line-size = <32>; - d-cache-size = <0x4000>; // L1, 16K - i-cache-size = <0x4000>; // L1, 16K - timebase-frequency = <0>; // from bootloader - bus-frequency = <0>; // from bootloader - clock-frequency = <0>; // from bootloader - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x04000000>; // 64MB - }; soc5200@f0000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc5200b-immr"; - ranges = <0 0xf0000000 0x0000c000>; - bus-frequency = <0>; // from bootloader - system-frequency = <0>; // from bootloader - - cdm@200 { - compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; - reg = <0x200 0x38>; - }; - - mpc5200_pic: interrupt-controller@500 { - // 5200 interrupts are encoded into two levels; - interrupt-controller; - #interrupt-cells = <3>; - compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; - reg = <0x500 0x80>; - }; - - timer@600 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x600 0x10>; - interrupts = <1 9 0>; + timer@600 { // General Purpose Timer fsl,has-wdt; }; - timer@610 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x610 0x10>; - interrupts = <1 10 0>; - }; - gpt2: timer@620 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - reg = <0x620 0x10>; - interrupts = <1 11 0>; gpio-controller; #gpio-cells = <2>; }; gpt3: timer@630 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - reg = <0x630 0x10>; - interrupts = <1 12 0>; gpio-controller; #gpio-cells = <2>; }; gpt4: timer@640 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - reg = <0x640 0x10>; - interrupts = <1 13 0>; gpio-controller; #gpio-cells = <2>; }; gpt5: timer@650 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - reg = <0x650 0x10>; - interrupts = <1 14 0>; gpio-controller; #gpio-cells = <2>; }; gpt6: timer@660 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - reg = <0x660 0x10>; - interrupts = <1 15 0>; gpio-controller; #gpio-cells = <2>; }; gpt7: timer@670 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - reg = <0x670 0x10>; - interrupts = <1 16 0>; - gpio-controller; - #gpio-cells = <2>; - }; - - rtc@800 { // Real time clock - compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; - reg = <0x800 0x100>; - interrupts = <1 5 0 1 6 0>; - }; - - can@900 { - compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; - interrupts = <2 17 0>; - reg = <0x900 0x80>; - }; - - can@980 { - compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; - interrupts = <2 18 0>; - reg = <0x980 0x80>; - }; - - gpio_simple: gpio@b00 { - compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; - reg = <0xb00 0x40>; - interrupts = <1 7 0>; gpio-controller; #gpio-cells = <2>; }; - gpio_wkup: gpio@c00 { - compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; - reg = <0xc00 0x40>; - interrupts = <1 8 0 0 3 0>; - gpio-controller; - #gpio-cells = <2>; - }; - - spi@f00 { - compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; - reg = <0xf00 0x20>; - interrupts = <2 13 0 2 14 0>; - }; - - usb@1000 { - compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; - reg = <0x1000 0xff>; - interrupts = <2 6 0>; - }; - - dma-controller@1200 { - compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; - reg = <0x1200 0x80>; - interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 - 3 4 0 3 5 0 3 6 0 3 7 0 - 3 8 0 3 9 0 3 10 0 3 11 0 - 3 12 0 3 13 0 3 14 0 3 15 0>; - }; - - xlb@1f00 { - compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; - reg = <0x1f00 0x100>; - }; - - ac97@2000 { /* PSC1 in ac97 mode */ + psc@2000 { /* PSC1 in ac97 mode */ compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97"; cell-index = <0>; - reg = <0x2000 0x100>; - interrupts = <2 1 0>; }; /* PSC2 port is used by CAN1/2 */ + psc@2200 { + status = "disabled"; + }; - serial@2400 { /* PSC3 in UART mode */ + psc@2400 { /* PSC3 in UART mode */ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - cell-index = <2>; - reg = <0x2400 0x100>; - interrupts = <2 3 0>; }; /* PSC4 is ??? */ + psc@2600 { + status = "disabled"; + }; /* PSC5 is ??? */ + psc@2800 { + status = "disabled"; + }; - serial@2c00 { /* PSC6 in UART mode */ + psc@2c00 { /* PSC6 in UART mode */ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - cell-index = <5>; - reg = <0x2c00 0x100>; - interrupts = <2 4 0>; }; ethernet@3000 { - compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; - reg = <0x3000 0x400>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <2 5 0>; phy-handle = <&phy0>; }; mdio@3000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; - reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts - interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. - phy0: ethernet-phy@0 { reg = <0>; }; }; - ata@3a00 { - compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; - reg = <0x3a00 0x100>; - interrupts = <2 7 0>; - }; - - i2c@3d00 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - reg = <0x3d00 0x40>; - interrupts = <2 15 0>; - }; - i2c@3d40 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - reg = <0x3d40 0x40>; - interrupts = <2 16 0>; rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; @@ -259,6 +105,7 @@ eeprom@52 { compatible = "catalyst,24c32"; reg = <0x52>; + pagesize = <32>; }; }; @@ -269,12 +116,6 @@ }; pci@f0000d00 { - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; - reg = <0xf0000d00 0x100>; interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot 0xc000 0 0 2 &mpc5200_pic 1 1 3 @@ -285,11 +126,12 @@ 0xc800 0 0 2 &mpc5200_pic 1 2 3 0xc800 0 0 3 &mpc5200_pic 1 3 3 0xc800 0 0 4 &mpc5200_pic 0 0 3>; - clock-frequency = <0>; // From boot loader - interrupts = <2 8 0 2 9 0 2 10 0>; - bus-range = <0 0>; ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; }; + + localbus { + status = "disabled"; + }; }; |