diff options
Diffstat (limited to 'arch/mn10300')
| -rw-r--r-- | arch/mn10300/include/asm/atomic.h | 158 | ||||
| -rw-r--r-- | arch/mn10300/include/asm/cache.h | 2 | ||||
| -rw-r--r-- | arch/mn10300/include/asm/scatterlist.h | 39 | ||||
| -rw-r--r-- | arch/mn10300/mm/fault.c | 9 | ||||
| -rw-r--r-- | arch/mn10300/unit-asb2305/pci-asb2305.c | 1 |
5 files changed, 9 insertions, 200 deletions
diff --git a/arch/mn10300/include/asm/atomic.h b/arch/mn10300/include/asm/atomic.h index e41222d6c2f..f0cc1f84a72 100644 --- a/arch/mn10300/include/asm/atomic.h +++ b/arch/mn10300/include/asm/atomic.h @@ -1,157 +1 @@ -/* MN10300 Atomic counter operations - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ -#ifndef _ASM_ATOMIC_H -#define _ASM_ATOMIC_H - -#ifdef CONFIG_SMP -#error not SMP safe -#endif - -/* - * Atomic operations that C can't guarantee us. Useful for - * resource counting etc.. - */ - -#define ATOMIC_INIT(i) { (i) } - -#ifdef __KERNEL__ - -/** - * atomic_read - read atomic variable - * @v: pointer of type atomic_t - * - * Atomically reads the value of @v. Note that the guaranteed - * useful range of an atomic_t is only 24 bits. - */ -#define atomic_read(v) (*(volatile int *)&(v)->counter) - -/** - * atomic_set - set atomic variable - * @v: pointer of type atomic_t - * @i: required value - * - * Atomically sets the value of @v to @i. Note that the guaranteed - * useful range of an atomic_t is only 24 bits. - */ -#define atomic_set(v, i) (((v)->counter) = (i)) - -#include <asm/system.h> - -/** - * atomic_add_return - add integer to atomic variable - * @i: integer value to add - * @v: pointer of type atomic_t - * - * Atomically adds @i to @v and returns the result - * Note that the guaranteed useful range of an atomic_t is only 24 bits. - */ -static inline int atomic_add_return(int i, atomic_t *v) -{ - unsigned long flags; - int temp; - - local_irq_save(flags); - temp = v->counter; - temp += i; - v->counter = temp; - local_irq_restore(flags); - - return temp; -} - -/** - * atomic_sub_return - subtract integer from atomic variable - * @i: integer value to subtract - * @v: pointer of type atomic_t - * - * Atomically subtracts @i from @v and returns the result - * Note that the guaranteed useful range of an atomic_t is only 24 bits. - */ -static inline int atomic_sub_return(int i, atomic_t *v) -{ - unsigned long flags; - int temp; - - local_irq_save(flags); - temp = v->counter; - temp -= i; - v->counter = temp; - local_irq_restore(flags); - - return temp; -} - -static inline int atomic_add_negative(int i, atomic_t *v) -{ - return atomic_add_return(i, v) < 0; -} - -static inline void atomic_add(int i, atomic_t *v) -{ - atomic_add_return(i, v); -} - -static inline void atomic_sub(int i, atomic_t *v) -{ - atomic_sub_return(i, v); -} - -static inline void atomic_inc(atomic_t *v) -{ - atomic_add_return(1, v); -} - -static inline void atomic_dec(atomic_t *v) -{ - atomic_sub_return(1, v); -} - -#define atomic_dec_return(v) atomic_sub_return(1, (v)) -#define atomic_inc_return(v) atomic_add_return(1, (v)) - -#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0) -#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) -#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0) - -#define atomic_add_unless(v, a, u) \ -({ \ - int c, old; \ - c = atomic_read(v); \ - while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \ - c = old; \ - c != (u); \ -}) - -#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) - -static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) -{ - unsigned long flags; - - mask = ~mask; - local_irq_save(flags); - *addr &= mask; - local_irq_restore(flags); -} - -#define atomic_xchg(ptr, v) (xchg(&(ptr)->counter, (v))) -#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new))) - -/* Atomic operations are already serializing on MN10300??? */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - -#include <asm-generic/atomic-long.h> - -#endif /* __KERNEL__ */ -#endif /* _ASM_ATOMIC_H */ +#include <asm-generic/atomic.h> diff --git a/arch/mn10300/include/asm/cache.h b/arch/mn10300/include/asm/cache.h index e03cfa2e997..6e2fe28dde4 100644 --- a/arch/mn10300/include/asm/cache.h +++ b/arch/mn10300/include/asm/cache.h @@ -21,6 +21,8 @@ #define L1_CACHE_DISPARITY L1_CACHE_NENTRIES * L1_CACHE_BYTES #endif +#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES + /* data cache purge registers * - read from the register to unconditionally purge that cache line * - write address & 0xffffff00 to conditionally purge that cache line diff --git a/arch/mn10300/include/asm/scatterlist.h b/arch/mn10300/include/asm/scatterlist.h index 67535901b9f..7bd00b9e030 100644 --- a/arch/mn10300/include/asm/scatterlist.h +++ b/arch/mn10300/include/asm/scatterlist.h @@ -11,45 +11,8 @@ #ifndef _ASM_SCATTERLIST_H #define _ASM_SCATTERLIST_H -#include <asm/types.h> - -/* - * Drivers must set either ->address or (preferred) page and ->offset - * to indicate where data must be transferred to/from. - * - * Using page is recommended since it handles highmem data as well as - * low mem. ->address is restricted to data which has a virtual mapping, and - * it will go away in the future. Updating to page can be automated very - * easily -- something like - * - * sg->address = some_ptr; - * - * can be rewritten as - * - * sg_set_page(virt_to_page(some_ptr)); - * sg->offset = (unsigned long) some_ptr & ~PAGE_MASK; - * - * and that's it. There's no excuse for not highmem enabling YOUR driver. /jens - */ -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; /* for highmem, page offset */ - dma_addr_t dma_address; - unsigned int length; -}; +#include <asm-generic/scatterlist.h> #define ISA_DMA_THRESHOLD (0x00ffffff) -/* - * These macros should be used after a pci_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) - #endif /* _ASM_SCATTERLIST_H */ diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c index 53bb17d0f06..81f153fa51b 100644 --- a/arch/mn10300/mm/fault.c +++ b/arch/mn10300/mm/fault.c @@ -338,11 +338,10 @@ no_context: */ out_of_memory: up_read(&mm->mmap_sem); - monitor_signal(regs); - printk(KERN_ALERT "VM: killing process %s\n", tsk->comm); - if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR) - do_exit(SIGKILL); - goto no_context; + if ((fault_code & MMUFCR_xFC_ACCESS) != MMUFCR_xFC_ACCESS_USR) + goto no_context; + pagefault_out_of_memory(); + return; do_sigbus: up_read(&mm->mmap_sem); diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.c b/arch/mn10300/unit-asb2305/pci-asb2305.c index d6119b879a9..45b40ac6c46 100644 --- a/arch/mn10300/unit-asb2305/pci-asb2305.c +++ b/arch/mn10300/unit-asb2305/pci-asb2305.c @@ -117,6 +117,7 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) * Invalidate the resource to prevent * child resource allocations in this * range. */ + r->start = r->end = 0; r->flags = 0; } } |