aboutsummaryrefslogtreecommitdiff
path: root/arch/mn10300/kernel
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mn10300/kernel')
-rw-r--r--arch/mn10300/kernel/asm-offsets.c8
-rw-r--r--arch/mn10300/kernel/entry.S2
-rw-r--r--arch/mn10300/kernel/init_task.c5
-rw-r--r--arch/mn10300/kernel/mn10300-serial-low.S2
-rw-r--r--arch/mn10300/kernel/mn10300-serial.c14
-rw-r--r--arch/mn10300/kernel/setup.c2
-rw-r--r--arch/mn10300/kernel/sys_mn10300.c1
-rw-r--r--arch/mn10300/kernel/vmlinux.lds.S40
8 files changed, 20 insertions, 54 deletions
diff --git a/arch/mn10300/kernel/asm-offsets.c b/arch/mn10300/kernel/asm-offsets.c
index 2646fcbd7d8..02dc7e461fe 100644
--- a/arch/mn10300/kernel/asm-offsets.c
+++ b/arch/mn10300/kernel/asm-offsets.c
@@ -85,7 +85,7 @@ void foo(void)
OFFSET(__rx_buffer, mn10300_serial_port, rx_buffer);
OFFSET(__rx_inp, mn10300_serial_port, rx_inp);
OFFSET(__rx_outp, mn10300_serial_port, rx_outp);
- OFFSET(__tx_info_buffer, mn10300_serial_port, uart.info);
+ OFFSET(__uart_state, mn10300_serial_port, uart.state);
OFFSET(__tx_xchar, mn10300_serial_port, tx_xchar);
OFFSET(__tx_break, mn10300_serial_port, tx_break);
OFFSET(__intr_flags, mn10300_serial_port, intr_flags);
@@ -95,7 +95,7 @@ void foo(void)
OFFSET(__iobase, mn10300_serial_port, _iobase);
DEFINE(__UART_XMIT_SIZE, UART_XMIT_SIZE);
- OFFSET(__xmit_buffer, uart_info, xmit.buf);
- OFFSET(__xmit_head, uart_info, xmit.head);
- OFFSET(__xmit_tail, uart_info, xmit.tail);
+ OFFSET(__xmit_buffer, uart_state, xmit.buf);
+ OFFSET(__xmit_head, uart_state, xmit.head);
+ OFFSET(__xmit_tail, uart_state, xmit.tail);
}
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index e0d2563af4f..a94e7ea3faa 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -723,7 +723,7 @@ ENTRY(sys_call_table)
.long sys_preadv
.long sys_pwritev /* 335 */
.long sys_rt_tgsigqueueinfo
- .long sys_perf_counter_open
+ .long sys_perf_event_open
nr_syscalls=(.-sys_call_table)/4
diff --git a/arch/mn10300/kernel/init_task.c b/arch/mn10300/kernel/init_task.c
index 80d423b80af..a481b043bea 100644
--- a/arch/mn10300/kernel/init_task.c
+++ b/arch/mn10300/kernel/init_task.c
@@ -27,9 +27,8 @@ static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"))) =
- { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
/*
* Initial task structure.
diff --git a/arch/mn10300/kernel/mn10300-serial-low.S b/arch/mn10300/kernel/mn10300-serial-low.S
index 22448538822..66702d25661 100644
--- a/arch/mn10300/kernel/mn10300-serial-low.S
+++ b/arch/mn10300/kernel/mn10300-serial-low.S
@@ -130,7 +130,7 @@ ENTRY(mn10300_serial_vdma_tx_handler)
or d2,d2
bne mnsc_vdma_tx_xchar
- mov (__tx_info_buffer,a3),a2 # get the uart_info struct for Tx
+ mov (__uart_state,a3),a2 # see if the TTY Tx queue has anything in it
mov (__xmit_tail,a2),d3
mov (__xmit_head,a2),d2
cmp d3,d2
diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c
index 2fd59664d00..229b710fc5d 100644
--- a/arch/mn10300/kernel/mn10300-serial.c
+++ b/arch/mn10300/kernel/mn10300-serial.c
@@ -391,7 +391,7 @@ static int mask_test_and_clear(volatile u8 *ptr, u8 mask)
static void mn10300_serial_receive_interrupt(struct mn10300_serial_port *port)
{
struct uart_icount *icount = &port->uart.icount;
- struct tty_struct *tty = port->uart.info->port.tty;
+ struct tty_struct *tty = port->uart.state->port.tty;
unsigned ix;
int count;
u8 st, ch, push, status, overrun;
@@ -566,16 +566,16 @@ static void mn10300_serial_transmit_interrupt(struct mn10300_serial_port *port)
{
_enter("%s", port->name);
- if (!port->uart.info || !port->uart.info->port.tty) {
+ if (!port->uart.state || !port->uart.state->port.tty) {
mn10300_serial_dis_tx_intr(port);
return;
}
if (uart_tx_stopped(&port->uart) ||
- uart_circ_empty(&port->uart.info->xmit))
+ uart_circ_empty(&port->uart.state->xmit))
mn10300_serial_dis_tx_intr(port);
- if (uart_circ_chars_pending(&port->uart.info->xmit) < WAKEUP_CHARS)
+ if (uart_circ_chars_pending(&port->uart.state->xmit) < WAKEUP_CHARS)
uart_write_wakeup(&port->uart);
}
@@ -596,7 +596,7 @@ static void mn10300_serial_cts_changed(struct mn10300_serial_port *port, u8 st)
*port->_control = ctr;
uart_handle_cts_change(&port->uart, st & SC2STR_CTS);
- wake_up_interruptible(&port->uart.info->delta_msr_wait);
+ wake_up_interruptible(&port->uart.state->port.delta_msr_wait);
}
/*
@@ -705,8 +705,8 @@ static void mn10300_serial_start_tx(struct uart_port *_port)
_enter("%s{%lu}",
port->name,
- CIRC_CNT(&port->uart.info->xmit.head,
- &port->uart.info->xmit.tail,
+ CIRC_CNT(&port->uart.state->xmit.head,
+ &port->uart.state->xmit.tail,
UART_XMIT_SIZE));
/* kick the virtual DMA controller */
diff --git a/arch/mn10300/kernel/setup.c b/arch/mn10300/kernel/setup.c
index 79890edfd67..3f24c298a3a 100644
--- a/arch/mn10300/kernel/setup.c
+++ b/arch/mn10300/kernel/setup.c
@@ -285,7 +285,7 @@ static void c_stop(struct seq_file *m, void *v)
{
}
-struct seq_operations cpuinfo_op = {
+const struct seq_operations cpuinfo_op = {
.start = c_start,
.next = c_next,
.stop = c_stop,
diff --git a/arch/mn10300/kernel/sys_mn10300.c b/arch/mn10300/kernel/sys_mn10300.c
index 3e52a105432..8ca5af00334 100644
--- a/arch/mn10300/kernel/sys_mn10300.c
+++ b/arch/mn10300/kernel/sys_mn10300.c
@@ -19,7 +19,6 @@
#include <linux/stat.h>
#include <linux/mman.h>
#include <linux/file.h>
-#include <linux/utsname.h>
#include <linux/tty.h>
#include <asm/uaccess.h>
diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S
index 76f41bdb79c..10549dcfb61 100644
--- a/arch/mn10300/kernel/vmlinux.lds.S
+++ b/arch/mn10300/kernel/vmlinux.lds.S
@@ -44,24 +44,8 @@ SECTIONS
RO_DATA(PAGE_SIZE)
/* writeable */
- .data : { /* Data */
- DATA_DATA
- CONSTRUCTORS
- }
-
- .data_nosave : { NOSAVE_DATA; }
-
- .data.page_aligned : { PAGE_ALIGNED_DATA(PAGE_SIZE); }
- .data.cacheline_aligned : { CACHELINE_ALIGNED_DATA(32); }
-
- /* rarely changed data like cpu maps */
- . = ALIGN(32);
- .data.read_mostly : AT(ADDR(.data.read_mostly)) {
- READ_MOSTLY_DATA(32);
- _edata = .; /* End of data section */
- }
-
- .data.init_task : { INIT_TASK_DATA(THREAD_SIZE); }
+ RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE)
+ _edata = .;
/* might get freed after init */
. = ALIGN(PAGE_SIZE);
@@ -74,22 +58,8 @@ SECTIONS
/* will be freed after init */
. = ALIGN(PAGE_SIZE); /* Init code and data */
__init_begin = .;
- .init.text : {
- _sinittext = .;
- INIT_TEXT;
- _einittext = .;
- }
- .init.data : { INIT_DATA; }
- .setup.init : { INIT_SETUP(16); }
-
- __initcall_start = .;
- .initcall.init : {
- INITCALLS
- }
- __initcall_end = .;
- .con_initcall.init : { CON_INITCALL; }
-
- SECURITY_INIT
+ INIT_TEXT_SECTION(PAGE_SIZE)
+ INIT_DATA_SECTION(16)
. = ALIGN(4);
__alt_instructions = .;
.altinstructions : { *(.altinstructions) }
@@ -100,8 +70,6 @@ SECTIONS
.exit.text : { EXIT_TEXT; }
.exit.data : { EXIT_DATA; }
- .init.ramfs : { INIT_RAM_FS; }
-
PERCPU(32)
. = ALIGN(PAGE_SIZE);
__init_end = .;
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-04 22:24:18 +0000