diff options
Diffstat (limited to 'arch/mn10300/include/asm/unit-asb2305/serial.h')
| -rw-r--r-- | arch/mn10300/include/asm/unit-asb2305/serial.h | 120 |
1 files changed, 120 insertions, 0 deletions
diff --git a/arch/mn10300/include/asm/unit-asb2305/serial.h b/arch/mn10300/include/asm/unit-asb2305/serial.h new file mode 100644 index 00000000000..73d31d67bb7 --- /dev/null +++ b/arch/mn10300/include/asm/unit-asb2305/serial.h @@ -0,0 +1,120 @@ +/* ASB2305-specific 8250 serial ports + * + * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ +#ifndef _ASM_UNIT_SERIAL_H +#define _ASM_UNIT_SERIAL_H + +#include <asm/cpu/cpu-regs.h> +#include <asm/proc/irq.h> +#include <linux/serial_reg.h> + +#define SERIAL_PORT0_BASE_ADDRESS 0xA6FB0000 +#define ASB2305_DEBUG_MCR __SYSREG(0xA6FB0000 + UART_MCR * 2, u8) + +#define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */ + +/* + * dispose of the /dev/ttyS0 serial port + */ +#ifndef CONFIG_GDBSTUB_ON_TTYSx + +#define SERIAL_PORT_DFNS \ + { \ + .baud_base = BASE_BAUD, \ + .irq = SERIAL_IRQ, \ + .flags = STD_COM_FLAGS, \ + .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \ + .iomem_reg_shift = 2, \ + .io_type = SERIAL_IO_MEM, \ + }, + +#ifndef __ASSEMBLY__ + +static inline void __debug_to_serial(const char *p, int n) +{ +} + +#endif /* !__ASSEMBLY__ */ + +#else /* CONFIG_GDBSTUB_ON_TTYSx */ + +#define SERIAL_PORT_DFNS /* stolen by gdb-stub */ + +#if defined(CONFIG_GDBSTUB_ON_TTYS0) +#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8) +#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) +#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8) +#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8) +#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8) +#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8) +#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8) +#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8) +#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) +#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) +#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) +#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8) +#define GDBPORT_SERIAL_IRQ SERIAL_IRQ + +#elif defined(CONFIG_GDBSTUB_ON_TTYS1) +#error The ASB2305 doesnt have a /dev/ttyS1 +#endif + +#ifndef __ASSEMBLY__ + +#define TTYS0_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8) +#define TTYS0_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8) +#define TTYS0_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8) +#define TTYS0_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8) + +#define LSR_WAIT_FOR(STATE) \ +do { \ + while (!(TTYS0_LSR & UART_LSR_##STATE)) {} \ +} while (0) +#define FLOWCTL_WAIT_FOR(LINE) \ +do { \ + while (!(TTYS0_MSR & UART_MSR_##LINE)) {} \ +} while (0) +#define FLOWCTL_CLEAR(LINE) \ +do { \ + TTYS0_MCR &= ~UART_MCR_##LINE; \ +} while (0) +#define FLOWCTL_SET(LINE) \ +do { \ + TTYS0_MCR |= UART_MCR_##LINE; \ +} while (0) +#define FLOWCTL_QUERY(LINE) ({ TTYS0_MSR & UART_MSR_##LINE; }) + +static inline void __debug_to_serial(const char *p, int n) +{ + char ch; + + FLOWCTL_SET(DTR); + + for (; n > 0; n--) { + LSR_WAIT_FOR(THRE); + FLOWCTL_WAIT_FOR(CTS); + + ch = *p++; + if (ch == 0x0a) { + TTYS0_TX = 0x0d; + LSR_WAIT_FOR(THRE); + FLOWCTL_WAIT_FOR(CTS); + } + TTYS0_TX = ch; + } + + FLOWCTL_CLEAR(DTR); +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* CONFIG_GDBSTUB_ON_TTYSx */ + +#endif /* _ASM_UNIT_SERIAL_H */ |