aboutsummaryrefslogtreecommitdiff
path: root/arch/mips
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips')
-rw-r--r--arch/mips/Kconfig72
-rw-r--r--arch/mips/Makefile122
-rw-r--r--arch/mips/alchemy/Kconfig (renamed from arch/mips/au1000/Kconfig)0
-rw-r--r--arch/mips/alchemy/common/Makefile (renamed from arch/mips/au1000/common/Makefile)0
-rw-r--r--arch/mips/alchemy/common/au1xxx_irqmap.c (renamed from arch/mips/au1000/common/au1xxx_irqmap.c)0
-rw-r--r--arch/mips/alchemy/common/clocks.c (renamed from arch/mips/au1000/common/clocks.c)0
-rw-r--r--arch/mips/alchemy/common/cputable.c (renamed from arch/mips/au1000/common/cputable.c)0
-rw-r--r--arch/mips/alchemy/common/dbdma.c (renamed from arch/mips/au1000/common/dbdma.c)0
-rw-r--r--arch/mips/alchemy/common/dma.c (renamed from arch/mips/au1000/common/dma.c)0
-rw-r--r--arch/mips/alchemy/common/gpio.c (renamed from arch/mips/au1000/common/gpio.c)6
-rw-r--r--arch/mips/alchemy/common/irq.c (renamed from arch/mips/au1000/common/irq.c)0
-rw-r--r--arch/mips/alchemy/common/pci.c (renamed from arch/mips/au1000/common/pci.c)0
-rw-r--r--arch/mips/alchemy/common/platform.c (renamed from arch/mips/au1000/common/platform.c)0
-rw-r--r--arch/mips/alchemy/common/power.c (renamed from arch/mips/au1000/common/power.c)0
-rw-r--r--arch/mips/alchemy/common/prom.c (renamed from arch/mips/au1000/common/prom.c)0
-rw-r--r--arch/mips/alchemy/common/puts.c (renamed from arch/mips/au1000/common/puts.c)0
-rw-r--r--arch/mips/alchemy/common/reset.c (renamed from arch/mips/au1000/common/reset.c)0
-rw-r--r--arch/mips/alchemy/common/setup.c (renamed from arch/mips/au1000/common/setup.c)0
-rw-r--r--arch/mips/alchemy/common/sleeper.S (renamed from arch/mips/au1000/common/sleeper.S)10
-rw-r--r--arch/mips/alchemy/common/time.c (renamed from arch/mips/au1000/common/time.c)0
-rw-r--r--arch/mips/alchemy/db1x00/Makefile (renamed from arch/mips/au1000/db1x00/Makefile)0
-rw-r--r--arch/mips/alchemy/db1x00/board_setup.c (renamed from arch/mips/au1000/db1x00/board_setup.c)0
-rw-r--r--arch/mips/alchemy/db1x00/init.c (renamed from arch/mips/au1000/db1x00/init.c)0
-rw-r--r--arch/mips/alchemy/db1x00/irqmap.c (renamed from arch/mips/au1000/db1x00/irqmap.c)0
-rw-r--r--arch/mips/alchemy/mtx-1/Makefile (renamed from arch/mips/au1000/mtx-1/Makefile)0
-rw-r--r--arch/mips/alchemy/mtx-1/board_setup.c (renamed from arch/mips/au1000/mtx-1/board_setup.c)0
-rw-r--r--arch/mips/alchemy/mtx-1/init.c (renamed from arch/mips/au1000/mtx-1/init.c)0
-rw-r--r--arch/mips/alchemy/mtx-1/irqmap.c (renamed from arch/mips/au1000/mtx-1/irqmap.c)0
-rw-r--r--arch/mips/alchemy/mtx-1/platform.c (renamed from arch/mips/au1000/mtx-1/platform.c)0
-rw-r--r--arch/mips/alchemy/pb1000/Makefile (renamed from arch/mips/au1000/pb1000/Makefile)0
-rw-r--r--arch/mips/alchemy/pb1000/board_setup.c (renamed from arch/mips/au1000/pb1000/board_setup.c)0
-rw-r--r--arch/mips/alchemy/pb1000/init.c (renamed from arch/mips/au1000/pb1000/init.c)0
-rw-r--r--arch/mips/alchemy/pb1000/irqmap.c (renamed from arch/mips/au1000/pb1000/irqmap.c)0
-rw-r--r--arch/mips/alchemy/pb1100/Makefile (renamed from arch/mips/au1000/pb1100/Makefile)0
-rw-r--r--arch/mips/alchemy/pb1100/board_setup.c (renamed from arch/mips/au1000/pb1100/board_setup.c)0
-rw-r--r--arch/mips/alchemy/pb1100/init.c (renamed from arch/mips/au1000/pb1100/init.c)0
-rw-r--r--arch/mips/alchemy/pb1100/irqmap.c (renamed from arch/mips/au1000/pb1100/irqmap.c)0
-rw-r--r--arch/mips/alchemy/pb1200/Makefile (renamed from arch/mips/au1000/pb1200/Makefile)0
-rw-r--r--arch/mips/alchemy/pb1200/board_setup.c (renamed from arch/mips/au1000/pb1200/board_setup.c)0
-rw-r--r--arch/mips/alchemy/pb1200/init.c (renamed from arch/mips/au1000/pb1200/init.c)0
-rw-r--r--arch/mips/alchemy/pb1200/irqmap.c (renamed from arch/mips/au1000/pb1200/irqmap.c)0
-rw-r--r--arch/mips/alchemy/pb1200/platform.c (renamed from arch/mips/au1000/pb1200/platform.c)0
-rw-r--r--arch/mips/alchemy/pb1500/Makefile (renamed from arch/mips/au1000/pb1500/Makefile)0
-rw-r--r--arch/mips/alchemy/pb1500/board_setup.c (renamed from arch/mips/au1000/pb1500/board_setup.c)0
-rw-r--r--arch/mips/alchemy/pb1500/init.c (renamed from arch/mips/au1000/pb1500/init.c)0
-rw-r--r--arch/mips/alchemy/pb1500/irqmap.c (renamed from arch/mips/au1000/pb1500/irqmap.c)0
-rw-r--r--arch/mips/alchemy/pb1550/Makefile (renamed from arch/mips/au1000/pb1550/Makefile)0
-rw-r--r--arch/mips/alchemy/pb1550/board_setup.c (renamed from arch/mips/au1000/pb1550/board_setup.c)0
-rw-r--r--arch/mips/alchemy/pb1550/init.c (renamed from arch/mips/au1000/pb1550/init.c)0
-rw-r--r--arch/mips/alchemy/pb1550/irqmap.c (renamed from arch/mips/au1000/pb1550/irqmap.c)0
-rw-r--r--arch/mips/alchemy/xxs1500/Makefile (renamed from arch/mips/au1000/xxs1500/Makefile)0
-rw-r--r--arch/mips/alchemy/xxs1500/board_setup.c (renamed from arch/mips/au1000/xxs1500/board_setup.c)0
-rw-r--r--arch/mips/alchemy/xxs1500/init.c (renamed from arch/mips/au1000/xxs1500/init.c)0
-rw-r--r--arch/mips/alchemy/xxs1500/irqmap.c (renamed from arch/mips/au1000/xxs1500/irqmap.c)0
-rw-r--r--arch/mips/bcm47xx/gpio.c85
-rw-r--r--arch/mips/bcm47xx/setup.c5
-rw-r--r--arch/mips/bcm47xx/wgt634u.c40
-rw-r--r--arch/mips/dec/time.c18
-rw-r--r--arch/mips/emma2rh/common/irq.c1
-rw-r--r--arch/mips/emma2rh/common/prom.c1
-rw-r--r--arch/mips/emma2rh/markeins/platform.c1
-rw-r--r--arch/mips/include/asm/Kbuild3
-rw-r--r--arch/mips/include/asm/abi.h25
-rw-r--r--arch/mips/include/asm/addrspace.h154
-rw-r--r--arch/mips/include/asm/asm.h409
-rw-r--r--arch/mips/include/asm/asmmacro-32.h158
-rw-r--r--arch/mips/include/asm/asmmacro-64.h139
-rw-r--r--arch/mips/include/asm/asmmacro.h82
-rw-r--r--arch/mips/include/asm/atomic.h801
-rw-r--r--arch/mips/include/asm/auxvec.h4
-rw-r--r--arch/mips/include/asm/barrier.h155
-rw-r--r--arch/mips/include/asm/bcache.h60
-rw-r--r--arch/mips/include/asm/bitops.h672
-rw-r--r--arch/mips/include/asm/bootinfo.h110
-rw-r--r--arch/mips/include/asm/branch.h38
-rw-r--r--arch/mips/include/asm/break.h34
-rw-r--r--arch/mips/include/asm/bug.h33
-rw-r--r--arch/mips/include/asm/bugs.h53
-rw-r--r--arch/mips/include/asm/byteorder.h76
-rw-r--r--arch/mips/include/asm/cache.h20
-rw-r--r--arch/mips/include/asm/cachectl.h26
-rw-r--r--arch/mips/include/asm/cacheflush.h116
-rw-r--r--arch/mips/include/asm/cacheops.h85
-rw-r--r--arch/mips/include/asm/cevt-r4k.h46
-rw-r--r--arch/mips/include/asm/checksum.h260
-rw-r--r--arch/mips/include/asm/cmp.h18
-rw-r--r--arch/mips/include/asm/cmpxchg.h124
-rw-r--r--arch/mips/include/asm/compat-signal.h119
-rw-r--r--arch/mips/include/asm/compat.h221
-rw-r--r--arch/mips/include/asm/compiler.h19
-rw-r--r--arch/mips/include/asm/cpu-features.h219
-rw-r--r--arch/mips/include/asm/cpu-info.h90
-rw-r--r--arch/mips/include/asm/cpu.h267
-rw-r--r--arch/mips/include/asm/cputime.h6
-rw-r--r--arch/mips/include/asm/current.h23
-rw-r--r--arch/mips/include/asm/debug.h48
-rw-r--r--arch/mips/include/asm/dec/ecc.h55
-rw-r--r--arch/mips/include/asm/dec/interrupts.h126
-rw-r--r--arch/mips/include/asm/dec/ioasic.h38
-rw-r--r--arch/mips/include/asm/dec/ioasic_addrs.h152
-rw-r--r--arch/mips/include/asm/dec/ioasic_ints.h74
-rw-r--r--arch/mips/include/asm/dec/kn01.h90
-rw-r--r--arch/mips/include/asm/dec/kn02.h91
-rw-r--r--arch/mips/include/asm/dec/kn02ba.h67
-rw-r--r--arch/mips/include/asm/dec/kn02ca.h79
-rw-r--r--arch/mips/include/asm/dec/kn02xa.h84
-rw-r--r--arch/mips/include/asm/dec/kn03.h74
-rw-r--r--arch/mips/include/asm/dec/kn05.h76
-rw-r--r--arch/mips/include/asm/dec/kn230.h26
-rw-r--r--arch/mips/include/asm/dec/machtype.h27
-rw-r--r--arch/mips/include/asm/dec/prom.h174
-rw-r--r--arch/mips/include/asm/dec/system.h19
-rw-r--r--arch/mips/include/asm/delay.h112
-rw-r--r--arch/mips/include/asm/device.h7
-rw-r--r--arch/mips/include/asm/div64.h110
-rw-r--r--arch/mips/include/asm/dma-mapping.h81
-rw-r--r--arch/mips/include/asm/dma.h315
-rw-r--r--arch/mips/include/asm/ds1286.h15
-rw-r--r--arch/mips/include/asm/ds1287.h27
-rw-r--r--arch/mips/include/asm/dsp.h85
-rw-r--r--arch/mips/include/asm/edac.h34
-rw-r--r--arch/mips/include/asm/elf.h367
-rw-r--r--arch/mips/include/asm/emergency-restart.h6
-rw-r--r--arch/mips/include/asm/emma2rh/emma2rh.h333
-rw-r--r--arch/mips/include/asm/emma2rh/markeins.h75
-rw-r--r--arch/mips/include/asm/errno.h131
-rw-r--r--arch/mips/include/asm/fb.h19
-rw-r--r--arch/mips/include/asm/fcntl.h61
-rw-r--r--arch/mips/include/asm/fixmap.h118
-rw-r--r--arch/mips/include/asm/floppy.h56
-rw-r--r--arch/mips/include/asm/fpregdef.h99
-rw-r--r--arch/mips/include/asm/fpu.h153
-rw-r--r--arch/mips/include/asm/fpu_emulator.h37
-rw-r--r--arch/mips/include/asm/futex.h203
-rw-r--r--arch/mips/include/asm/fw/arc/hinv.h175
-rw-r--r--arch/mips/include/asm/fw/arc/types.h86
-rw-r--r--arch/mips/include/asm/fw/cfe/cfe_api.h122
-rw-r--r--arch/mips/include/asm/fw/cfe/cfe_error.h80
-rw-r--r--arch/mips/include/asm/gcmpregs.h117
-rw-r--r--arch/mips/include/asm/gic.h487
-rw-r--r--arch/mips/include/asm/gpio.h6
-rw-r--r--arch/mips/include/asm/gt64120.h580
-rw-r--r--arch/mips/include/asm/hardirq.h24
-rw-r--r--arch/mips/include/asm/hazards.h271
-rw-r--r--arch/mips/include/asm/highmem.h67
-rw-r--r--arch/mips/include/asm/hw_irq.h20
-rw-r--r--arch/mips/include/asm/i8253.h21
-rw-r--r--arch/mips/include/asm/i8259.h86
-rw-r--r--arch/mips/include/asm/ide.h13
-rw-r--r--arch/mips/include/asm/inst.h394
-rw-r--r--arch/mips/include/asm/io.h589
-rw-r--r--arch/mips/include/asm/ioctl.h94
-rw-r--r--arch/mips/include/asm/ioctls.h109
-rw-r--r--arch/mips/include/asm/ip32/crime.h158
-rw-r--r--arch/mips/include/asm/ip32/ip32_ints.h114
-rw-r--r--arch/mips/include/asm/ip32/mace.h365
-rw-r--r--arch/mips/include/asm/ipcbuf.h28
-rw-r--r--arch/mips/include/asm/irq.h163
-rw-r--r--arch/mips/include/asm/irq_cpu.h20
-rw-r--r--arch/mips/include/asm/irq_gt641xx.h60
-rw-r--r--arch/mips/include/asm/irq_regs.h21
-rw-r--r--arch/mips/include/asm/irqflags.h283
-rw-r--r--arch/mips/include/asm/isadep.h34
-rw-r--r--arch/mips/include/asm/jazz.h310
-rw-r--r--arch/mips/include/asm/jazzdma.h95
-rw-r--r--arch/mips/include/asm/kdebug.h13
-rw-r--r--arch/mips/include/asm/kexec.h30
-rw-r--r--arch/mips/include/asm/kgdb.h44
-rw-r--r--arch/mips/include/asm/kmap_types.h30
-rw-r--r--arch/mips/include/asm/kspd.h36
-rw-r--r--arch/mips/include/asm/lasat/ds1603.h18
-rw-r--r--arch/mips/include/asm/lasat/eeprom.h17
-rw-r--r--arch/mips/include/asm/lasat/head.h22
-rw-r--r--arch/mips/include/asm/lasat/lasat.h258
-rw-r--r--arch/mips/include/asm/lasat/lasatint.h14
-rw-r--r--arch/mips/include/asm/lasat/picvue.h15
-rw-r--r--arch/mips/include/asm/lasat/serial.h13
-rw-r--r--arch/mips/include/asm/linkage.h10
-rw-r--r--arch/mips/include/asm/local.h221
-rw-r--r--arch/mips/include/asm/m48t35.h27
-rw-r--r--arch/mips/include/asm/m48t37.h35
-rw-r--r--arch/mips/include/asm/mach-au1x00/au1000.h1772
-rw-r--r--arch/mips/include/asm/mach-au1x00/au1000_dma.h458
-rw-r--r--arch/mips/include/asm/mach-au1x00/au1000_gpio.h56
-rw-r--r--arch/mips/include/asm/mach-au1x00/au1100_mmc.h208
-rw-r--r--arch/mips/include/asm/mach-au1x00/au1550_spi.h15
-rw-r--r--arch/mips/include/asm/mach-au1x00/au1xxx.h43
-rw-r--r--arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h386
-rw-r--r--arch/mips/include/asm/mach-au1x00/au1xxx_ide.h194
-rw-r--r--arch/mips/include/asm/mach-au1x00/au1xxx_psc.h505
-rw-r--r--arch/mips/include/asm/mach-au1x00/gpio.h69
-rw-r--r--arch/mips/include/asm/mach-au1x00/ioremap.h42
-rw-r--r--arch/mips/include/asm/mach-au1x00/prom.h13
-rw-r--r--arch/mips/include/asm/mach-au1x00/war.h25
-rw-r--r--arch/mips/include/asm/mach-bcm47xx/bcm47xx.h25
-rw-r--r--arch/mips/include/asm/mach-bcm47xx/gpio.h58
-rw-r--r--arch/mips/include/asm/mach-bcm47xx/war.h25
-rw-r--r--arch/mips/include/asm/mach-cobalt/cobalt.h22
-rw-r--r--arch/mips/include/asm/mach-cobalt/cpu-feature-overrides.h56
-rw-r--r--arch/mips/include/asm/mach-cobalt/irq.h57
-rw-r--r--arch/mips/include/asm/mach-cobalt/mach-gt64120.h27
-rw-r--r--arch/mips/include/asm/mach-cobalt/war.h25
-rw-r--r--arch/mips/include/asm/mach-db1x00/db1200.h230
-rw-r--r--arch/mips/include/asm/mach-db1x00/db1x00.h179
-rw-r--r--arch/mips/include/asm/mach-dec/mc146818rtc.h43
-rw-r--r--arch/mips/include/asm/mach-dec/war.h25
-rw-r--r--arch/mips/include/asm/mach-emma2rh/irq.h15
-rw-r--r--arch/mips/include/asm/mach-emma2rh/war.h25
-rw-r--r--arch/mips/include/asm/mach-excite/cpu-feature-overrides.h48
-rw-r--r--arch/mips/include/asm/mach-excite/excite.h154
-rw-r--r--arch/mips/include/asm/mach-excite/excite_fpga.h80
-rw-r--r--arch/mips/include/asm/mach-excite/excite_nandflash.h7
-rw-r--r--arch/mips/include/asm/mach-excite/rm9k_eth.h23
-rw-r--r--arch/mips/include/asm/mach-excite/rm9k_wdt.h12
-rw-r--r--arch/mips/include/asm/mach-excite/rm9k_xicap.h16
-rw-r--r--arch/mips/include/asm/mach-excite/war.h25
-rw-r--r--arch/mips/include/asm/mach-generic/cpu-feature-overrides.h13
-rw-r--r--arch/mips/include/asm/mach-generic/dma-coherence.h45
-rw-r--r--arch/mips/include/asm/mach-generic/floppy.h139
-rw-r--r--arch/mips/include/asm/mach-generic/gpio.h21
-rw-r--r--arch/mips/include/asm/mach-generic/ide.h138
-rw-r--r--arch/mips/include/asm/mach-generic/ioremap.h34
-rw-r--r--arch/mips/include/asm/mach-generic/irq.h45
-rw-r--r--arch/mips/include/asm/mach-generic/kernel-entry-init.h25
-rw-r--r--arch/mips/include/asm/mach-generic/kmalloc.h13
-rw-r--r--arch/mips/include/asm/mach-generic/mangle-port.h52
-rw-r--r--arch/mips/include/asm/mach-generic/mc146818rtc.h36
-rw-r--r--arch/mips/include/asm/mach-generic/spaces.h85
-rw-r--r--arch/mips/include/asm/mach-generic/topology.h1
-rw-r--r--arch/mips/include/asm/mach-ip22/cpu-feature-overrides.h44
-rw-r--r--arch/mips/include/asm/mach-ip22/spaces.h27
-rw-r--r--arch/mips/include/asm/mach-ip22/war.h29
-rw-r--r--arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h54
-rw-r--r--arch/mips/include/asm/mach-ip27/dma-coherence.h50
-rw-r--r--arch/mips/include/asm/mach-ip27/irq.h22
-rw-r--r--arch/mips/include/asm/mach-ip27/kernel-entry-init.h59
-rw-r--r--arch/mips/include/asm/mach-ip27/kmalloc.h8
-rw-r--r--arch/mips/include/asm/mach-ip27/mangle-port.h25
-rw-r--r--arch/mips/include/asm/mach-ip27/mmzone.h36
-rw-r--r--arch/mips/include/asm/mach-ip27/spaces.h30
-rw-r--r--arch/mips/include/asm/mach-ip27/topology.h59
-rw-r--r--arch/mips/include/asm/mach-ip27/war.h25
-rw-r--r--arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h50
-rw-r--r--arch/mips/include/asm/mach-ip28/spaces.h22
-rw-r--r--arch/mips/include/asm/mach-ip28/war.h25
-rw-r--r--arch/mips/include/asm/mach-ip32/cpu-feature-overrides.h50
-rw-r--r--arch/mips/include/asm/mach-ip32/dma-coherence.h72
-rw-r--r--arch/mips/include/asm/mach-ip32/kmalloc.h11
-rw-r--r--arch/mips/include/asm/mach-ip32/mangle-port.h26
-rw-r--r--arch/mips/include/asm/mach-ip32/mc146818rtc.h36
-rw-r--r--arch/mips/include/asm/mach-ip32/war.h25
-rw-r--r--arch/mips/include/asm/mach-jazz/dma-coherence.h40
-rw-r--r--arch/mips/include/asm/mach-jazz/floppy.h135
-rw-r--r--arch/mips/include/asm/mach-jazz/mc146818rtc.h38
-rw-r--r--arch/mips/include/asm/mach-jazz/war.h25
-rw-r--r--arch/mips/include/asm/mach-lasat/irq.h13
-rw-r--r--arch/mips/include/asm/mach-lasat/mach-gt64120.h27
-rw-r--r--arch/mips/include/asm/mach-lasat/war.h25
-rw-r--r--arch/mips/include/asm/mach-lemote/dma-coherence.h42
-rw-r--r--arch/mips/include/asm/mach-lemote/mc146818rtc.h36
-rw-r--r--arch/mips/include/asm/mach-lemote/war.h25
-rw-r--r--arch/mips/include/asm/mach-malta/cpu-feature-overrides.h72
-rw-r--r--arch/mips/include/asm/mach-malta/irq.h9
-rw-r--r--arch/mips/include/asm/mach-malta/kernel-entry-init.h52
-rw-r--r--arch/mips/include/asm/mach-malta/mach-gt64120.h19
-rw-r--r--arch/mips/include/asm/mach-malta/mc146818rtc.h48
-rw-r--r--arch/mips/include/asm/mach-malta/war.h25
-rw-r--r--arch/mips/include/asm/mach-mipssim/cpu-feature-overrides.h65
-rw-r--r--arch/mips/include/asm/mach-mipssim/war.h25
-rw-r--r--arch/mips/include/asm/mach-pb1x00/mc146818rtc.h34
-rw-r--r--arch/mips/include/asm/mach-pb1x00/pb1000.h87
-rw-r--r--arch/mips/include/asm/mach-pb1x00/pb1100.h85
-rw-r--r--arch/mips/include/asm/mach-pb1x00/pb1200.h259
-rw-r--r--arch/mips/include/asm/mach-pb1x00/pb1500.h49
-rw-r--r--arch/mips/include/asm/mach-pb1x00/pb1550.h177
-rw-r--r--arch/mips/include/asm/mach-pnx8550/cm.h43
-rw-r--r--arch/mips/include/asm/mach-pnx8550/glb.h86
-rw-r--r--arch/mips/include/asm/mach-pnx8550/int.h140
-rw-r--r--arch/mips/include/asm/mach-pnx8550/kernel-entry-init.h262
-rw-r--r--arch/mips/include/asm/mach-pnx8550/nand.h121
-rw-r--r--arch/mips/include/asm/mach-pnx8550/pci.h185
-rw-r--r--arch/mips/include/asm/mach-pnx8550/uart.h30
-rw-r--r--arch/mips/include/asm/mach-pnx8550/usb.h32
-rw-r--r--arch/mips/include/asm/mach-pnx8550/war.h25
-rw-r--r--arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h81
-rw-r--r--arch/mips/include/asm/mach-rc32434/ddr.h141
-rw-r--r--arch/mips/include/asm/mach-rc32434/dma.h103
-rw-r--r--arch/mips/include/asm/mach-rc32434/dma_v.h52
-rw-r--r--arch/mips/include/asm/mach-rc32434/eth.h220
-rw-r--r--arch/mips/include/asm/mach-rc32434/gpio.h88
-rw-r--r--arch/mips/include/asm/mach-rc32434/integ.h59
-rw-r--r--arch/mips/include/asm/mach-rc32434/irq.h33
-rw-r--r--arch/mips/include/asm/mach-rc32434/pci.h481
-rw-r--r--arch/mips/include/asm/mach-rc32434/prom.h40
-rw-r--r--arch/mips/include/asm/mach-rc32434/rb.h84
-rw-r--r--arch/mips/include/asm/mach-rc32434/rc32434.h19
-rw-r--r--arch/mips/include/asm/mach-rc32434/timer.h65
-rw-r--r--arch/mips/include/asm/mach-rc32434/war.h25
-rw-r--r--arch/mips/include/asm/mach-rm/cpu-feature-overrides.h43
-rw-r--r--arch/mips/include/asm/mach-rm/mc146818rtc.h21
-rw-r--r--arch/mips/include/asm/mach-rm/war.h29
-rw-r--r--arch/mips/include/asm/mach-sibyte/cpu-feature-overrides.h47
-rw-r--r--arch/mips/include/asm/mach-sibyte/war.h37
-rw-r--r--arch/mips/include/asm/mach-tx39xx/ioremap.h38
-rw-r--r--arch/mips/include/asm/mach-tx39xx/mangle-port.h23
-rw-r--r--arch/mips/include/asm/mach-tx39xx/war.h25
-rw-r--r--arch/mips/include/asm/mach-tx49xx/cpu-feature-overrides.h23
-rw-r--r--arch/mips/include/asm/mach-tx49xx/ioremap.h43
-rw-r--r--arch/mips/include/asm/mach-tx49xx/kmalloc.h8
-rw-r--r--arch/mips/include/asm/mach-tx49xx/war.h25
-rw-r--r--arch/mips/include/asm/mach-vr41xx/irq.h8
-rw-r--r--arch/mips/include/asm/mach-vr41xx/war.h25
-rw-r--r--arch/mips/include/asm/mach-wrppmc/mach-gt64120.h83
-rw-r--r--arch/mips/include/asm/mach-wrppmc/war.h25
-rw-r--r--arch/mips/include/asm/mach-yosemite/cpu-feature-overrides.h47
-rw-r--r--arch/mips/include/asm/mach-yosemite/war.h25
-rw-r--r--arch/mips/include/asm/mc146818-time.h119
-rw-r--r--arch/mips/include/asm/mc146818rtc.h16
-rw-r--r--arch/mips/include/asm/mips-boards/bonito64.h436
-rw-r--r--arch/mips/include/asm/mips-boards/generic.h104
-rw-r--r--arch/mips/include/asm/mips-boards/launch.h35
-rw-r--r--arch/mips/include/asm/mips-boards/malta.h102
-rw-r--r--arch/mips/include/asm/mips-boards/maltaint.h110
-rw-r--r--arch/mips/include/asm/mips-boards/msc01_pci.h258
-rw-r--r--arch/mips/include/asm/mips-boards/piix4.h80
-rw-r--r--arch/mips/include/asm/mips-boards/prom.h47
-rw-r--r--arch/mips/include/asm/mips-boards/sim.h40
-rw-r--r--arch/mips/include/asm/mips-boards/simint.h31
-rw-r--r--arch/mips/include/asm/mips_mt.h26
-rw-r--r--arch/mips/include/asm/mipsmtregs.h395
-rw-r--r--arch/mips/include/asm/mipsprom.h76
-rw-r--r--arch/mips/include/asm/mipsregs.h1526
-rw-r--r--arch/mips/include/asm/mman.h77
-rw-r--r--arch/mips/include/asm/mmu.h6
-rw-r--r--arch/mips/include/asm/mmu_context.h297
-rw-r--r--arch/mips/include/asm/mmzone.h17
-rw-r--r--arch/mips/include/asm/module.h136
-rw-r--r--arch/mips/include/asm/msc01_ic.h148
-rw-r--r--arch/mips/include/asm/msgbuf.h47
-rw-r--r--arch/mips/include/asm/mutex.h9
-rw-r--r--arch/mips/include/asm/nile4.h310
-rw-r--r--arch/mips/include/asm/paccess.h112
-rw-r--r--arch/mips/include/asm/page.h191
-rw-r--r--arch/mips/include/asm/param.h31
-rw-r--r--arch/mips/include/asm/parport.h15
-rw-r--r--arch/mips/include/asm/pci.h179
-rw-r--r--arch/mips/include/asm/pci/bridge.h854
-rw-r--r--arch/mips/include/asm/percpu.h6
-rw-r--r--arch/mips/include/asm/pgalloc.h143
-rw-r--r--arch/mips/include/asm/pgtable-32.h234
-rw-r--r--arch/mips/include/asm/pgtable-64.h253
-rw-r--r--arch/mips/include/asm/pgtable-bits.h137
-rw-r--r--arch/mips/include/asm/pgtable.h383
-rw-r--r--arch/mips/include/asm/pmc-sierra/msp71xx/gpio.h46
-rw-r--r--arch/mips/include/asm/pmc-sierra/msp71xx/msp_cic_int.h151
-rw-r--r--arch/mips/include/asm/pmc-sierra/msp71xx/msp_int.h43
-rw-r--r--arch/mips/include/asm/pmc-sierra/msp71xx/msp_pci.h205
-rw-r--r--arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h176
-rw-r--r--arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h236
-rw-r--r--arch/mips/include/asm/pmc-sierra/msp71xx/msp_regs.h663
-rw-r--r--arch/mips/include/asm/pmc-sierra/msp71xx/msp_slp_int.h141
-rw-r--r--arch/mips/include/asm/pmc-sierra/msp71xx/war.h28
-rw-r--r--arch/mips/include/asm/pmon.h46
-rw-r--r--arch/mips/include/asm/poll.h9
-rw-r--r--arch/mips/include/asm/posix_types.h144
-rw-r--r--arch/mips/include/asm/prefetch.h87
-rw-r--r--arch/mips/include/asm/processor.h283
-rw-r--r--arch/mips/include/asm/ptrace.h154
-rw-r--r--arch/mips/include/asm/r4k-timer.h30
-rw-r--r--arch/mips/include/asm/r4kcache.h443
-rw-r--r--arch/mips/include/asm/reboot.h15
-rw-r--r--arch/mips/include/asm/reg.h128
-rw-r--r--arch/mips/include/asm/regdef.h100
-rw-r--r--arch/mips/include/asm/resource.h35
-rw-r--r--arch/mips/include/asm/rm9k-ocd.h56
-rw-r--r--arch/mips/include/asm/rtlx.h65
-rw-r--r--arch/mips/include/asm/scatterlist.h28
-rw-r--r--arch/mips/include/asm/seccomp.h37
-rw-r--r--arch/mips/include/asm/sections.h6
-rw-r--r--arch/mips/include/asm/segment.h6
-rw-r--r--arch/mips/include/asm/sembuf.h22
-rw-r--r--arch/mips/include/asm/serial.h22
-rw-r--r--arch/mips/include/asm/setup.h10
-rw-r--r--arch/mips/include/asm/sgi/gio.h86
-rw-r--r--arch/mips/include/asm/sgi/hpc3.h317
-rw-r--r--arch/mips/include/asm/sgi/ioc.h200
-rw-r--r--arch/mips/include/asm/sgi/ip22.h78
-rw-r--r--arch/mips/include/asm/sgi/mc.h231
-rw-r--r--arch/mips/include/asm/sgi/pi1.h71
-rw-r--r--arch/mips/include/asm/sgi/seeq.h21
-rw-r--r--arch/mips/include/asm/sgi/sgi.h47
-rw-r--r--arch/mips/include/asm/sgi/wd.h20
-rw-r--r--arch/mips/include/asm/sgialib.h124
-rw-r--r--arch/mips/include/asm/sgiarcs.h548
-rw-r--r--arch/mips/include/asm/sgidefs.h44
-rw-r--r--arch/mips/include/asm/shmbuf.h38
-rw-r--r--arch/mips/include/asm/shmparam.h13
-rw-r--r--arch/mips/include/asm/sibyte/bcm1480_int.h312
-rw-r--r--arch/mips/include/asm/sibyte/bcm1480_l2c.h176
-rw-r--r--arch/mips/include/asm/sibyte/bcm1480_mc.h984
-rw-r--r--arch/mips/include/asm/sibyte/bcm1480_regs.h902
-rw-r--r--arch/mips/include/asm/sibyte/bcm1480_scd.h406
-rw-r--r--arch/mips/include/asm/sibyte/bigsur.h49
-rw-r--r--arch/mips/include/asm/sibyte/board.h68
-rw-r--r--arch/mips/include/asm/sibyte/carmel.h58
-rw-r--r--arch/mips/include/asm/sibyte/sb1250.h68
-rw-r--r--arch/mips/include/asm/sibyte/sb1250_defs.h259
-rw-r--r--arch/mips/include/asm/sibyte/sb1250_dma.h594
-rw-r--r--arch/mips/include/asm/sibyte/sb1250_genbus.h474
-rw-r--r--arch/mips/include/asm/sibyte/sb1250_int.h248
-rw-r--r--arch/mips/include/asm/sibyte/sb1250_l2c.h131
-rw-r--r--arch/mips/include/asm/sibyte/sb1250_ldt.h423
-rw-r--r--arch/mips/include/asm/sibyte/sb1250_mac.h656
-rw-r--r--arch/mips/include/asm/sibyte/sb1250_mc.h550
-rw-r--r--arch/mips/include/asm/sibyte/sb1250_regs.h893
-rw-r--r--arch/mips/include/asm/sibyte/sb1250_scd.h654
-rw-r--r--arch/mips/include/asm/sibyte/sb1250_smbus.h204
-rw-r--r--arch/mips/include/asm/sibyte/sb1250_syncser.h146
-rw-r--r--arch/mips/include/asm/sibyte/sb1250_uart.h362
-rw-r--r--arch/mips/include/asm/sibyte/sentosa.h40
-rw-r--r--arch/mips/include/asm/sibyte/swarm.h64
-rw-r--r--arch/mips/include/asm/sigcontext.h100
-rw-r--r--arch/mips/include/asm/siginfo.h130
-rw-r--r--arch/mips/include/asm/signal.h139
-rw-r--r--arch/mips/include/asm/sim.h82
-rw-r--r--arch/mips/include/asm/smp-ops.h57
-rw-r--r--arch/mips/include/asm/smp.h63
-rw-r--r--arch/mips/include/asm/smtc.h71
-rw-r--r--arch/mips/include/asm/smtc_ipi.h128
-rw-r--r--arch/mips/include/asm/smtc_proc.h23
-rw-r--r--arch/mips/include/asm/smvp.h19
-rw-r--r--arch/mips/include/asm/sn/addrs.h430
-rw-r--r--arch/mips/include/asm/sn/agent.h46
-rw-r--r--arch/mips/include/asm/sn/arch.h64
-rw-r--r--arch/mips/include/asm/sn/fru.h44
-rw-r--r--arch/mips/include/asm/sn/gda.h107
-rw-r--r--arch/mips/include/asm/sn/hub.h16
-rw-r--r--arch/mips/include/asm/sn/intr.h129
-rw-r--r--arch/mips/include/asm/sn/io.h59
-rw-r--r--arch/mips/include/asm/sn/ioc3.h663
-rw-r--r--arch/mips/include/asm/sn/klconfig.h898
-rw-r--r--arch/mips/include/asm/sn/kldir.h217
-rw-r--r--arch/mips/include/asm/sn/klkernvars.h29
-rw-r--r--arch/mips/include/asm/sn/launch.h106
-rw-r--r--arch/mips/include/asm/sn/mapped_kernel.h54
-rw-r--r--arch/mips/include/asm/sn/nmi.h125
-rw-r--r--arch/mips/include/asm/sn/sn0/addrs.h288
-rw-r--r--arch/mips/include/asm/sn/sn0/arch.h72
-rw-r--r--arch/mips/include/asm/sn/sn0/hub.h40
-rw-r--r--arch/mips/include/asm/sn/sn0/hubio.h972
-rw-r--r--arch/mips/include/asm/sn/sn0/hubmd.h789
-rw-r--r--arch/mips/include/asm/sn/sn0/hubni.h255
-rw-r--r--arch/mips/include/asm/sn/sn0/hubpi.h409
-rw-r--r--arch/mips/include/asm/sn/sn0/ip27.h85
-rw-r--r--arch/mips/include/asm/sn/sn_private.h19
-rw-r--r--arch/mips/include/asm/sn/types.h26
-rw-r--r--arch/mips/include/asm/sni.h244
-rw-r--r--arch/mips/include/asm/socket.h117
-rw-r--r--arch/mips/include/asm/sockios.h26
-rw-r--r--arch/mips/include/asm/sparsemem.h14
-rw-r--r--arch/mips/include/asm/spinlock.h487
-rw-r--r--arch/mips/include/asm/spinlock_types.h25
-rw-r--r--arch/mips/include/asm/stackframe.h574
-rw-r--r--arch/mips/include/asm/stacktrace.h48
-rw-r--r--arch/mips/include/asm/stat.h132
-rw-r--r--arch/mips/include/asm/statfs.h96
-rw-r--r--arch/mips/include/asm/string.h143
-rw-r--r--arch/mips/include/asm/suspend.h6
-rw-r--r--arch/mips/include/asm/sysmips.h25
-rw-r--r--arch/mips/include/asm/system.h222
-rw-r--r--arch/mips/include/asm/termbits.h226
-rw-r--r--arch/mips/include/asm/termios.h132
-rw-r--r--arch/mips/include/asm/thread_info.h153
-rw-r--r--arch/mips/include/asm/time.h79
-rw-r--r--arch/mips/include/asm/timex.h43
-rw-r--r--arch/mips/include/asm/titan_dep.h231
-rw-r--r--arch/mips/include/asm/tlb.h23
-rw-r--r--arch/mips/include/asm/tlbdebug.h16
-rw-r--r--arch/mips/include/asm/tlbflush.h47
-rw-r--r--arch/mips/include/asm/topology.h17
-rw-r--r--arch/mips/include/asm/traps.h28
-rw-r--r--arch/mips/include/asm/txx9/boards.h13
-rw-r--r--arch/mips/include/asm/txx9/generic.h89
-rw-r--r--arch/mips/include/asm/txx9/jmr3927.h180
-rw-r--r--arch/mips/include/asm/txx9/pci.h39
-rw-r--r--arch/mips/include/asm/txx9/rbtx4927.h92
-rw-r--r--arch/mips/include/asm/txx9/rbtx4938.h145
-rw-r--r--arch/mips/include/asm/txx9/rbtx4939.h133
-rw-r--r--arch/mips/include/asm/txx9/smsc_fdc37m81x.h68
-rw-r--r--arch/mips/include/asm/txx9/spi.h34
-rw-r--r--arch/mips/include/asm/txx9/tx3927.h341
-rw-r--r--arch/mips/include/asm/txx9/tx4927.h269
-rw-r--r--arch/mips/include/asm/txx9/tx4927pcic.h203
-rw-r--r--arch/mips/include/asm/txx9/tx4938.h308
-rw-r--r--arch/mips/include/asm/txx9/tx4939.h545
-rw-r--r--arch/mips/include/asm/txx9irq.h34
-rw-r--r--arch/mips/include/asm/txx9pio.h29
-rw-r--r--arch/mips/include/asm/txx9tmr.h67
-rw-r--r--arch/mips/include/asm/types.h54
-rw-r--r--arch/mips/include/asm/uaccess.h1114
-rw-r--r--arch/mips/include/asm/ucontext.h21
-rw-r--r--arch/mips/include/asm/unaligned.h28
-rw-r--r--arch/mips/include/asm/unistd.h1037
-rw-r--r--arch/mips/include/asm/user.h58
-rw-r--r--arch/mips/include/asm/vga.h47
-rw-r--r--arch/mips/include/asm/vpe.h37
-rw-r--r--arch/mips/include/asm/vr41xx/capcella.h43
-rw-r--r--arch/mips/include/asm/vr41xx/giu.h78
-rw-r--r--arch/mips/include/asm/vr41xx/irq.h101
-rw-r--r--arch/mips/include/asm/vr41xx/mpc30x.h37
-rw-r--r--arch/mips/include/asm/vr41xx/pci.h90
-rw-r--r--arch/mips/include/asm/vr41xx/siu.h58
-rw-r--r--arch/mips/include/asm/vr41xx/tb0219.h42
-rw-r--r--arch/mips/include/asm/vr41xx/tb0226.h43
-rw-r--r--arch/mips/include/asm/vr41xx/tb0287.h43
-rw-r--r--arch/mips/include/asm/vr41xx/vr41xx.h152
-rw-r--r--arch/mips/include/asm/war.h244
-rw-r--r--arch/mips/include/asm/watch.h32
-rw-r--r--arch/mips/include/asm/wbflush.h34
-rw-r--r--arch/mips/include/asm/xor.h1
-rw-r--r--arch/mips/include/asm/xtalk/xtalk.h52
-rw-r--r--arch/mips/include/asm/xtalk/xwidget.h167
-rw-r--r--arch/mips/kernel/Makefile3
-rw-r--r--arch/mips/kernel/cevt-r4k.c173
-rw-r--r--arch/mips/kernel/cevt-smtc.c321
-rw-r--r--arch/mips/kernel/cpu-probe.c12
-rw-r--r--arch/mips/kernel/entry.S10
-rw-r--r--arch/mips/kernel/genex.S8
-rw-r--r--arch/mips/kernel/head.S1
-rw-r--r--arch/mips/kernel/kgdb.c3
-rw-r--r--arch/mips/kernel/linux32.c101
-rw-r--r--arch/mips/kernel/mips-mt-fpaff.c2
-rw-r--r--arch/mips/kernel/proc.c15
-rw-r--r--arch/mips/kernel/process.c20
-rw-r--r--arch/mips/kernel/ptrace.c102
-rw-r--r--arch/mips/kernel/ptrace32.c59
-rw-r--r--arch/mips/kernel/rtlx.c4
-rw-r--r--arch/mips/kernel/scall64-n32.S6
-rw-r--r--arch/mips/kernel/scall64-o32.S6
-rw-r--r--arch/mips/kernel/signal32.c12
-rw-r--r--arch/mips/kernel/smp.c2
-rw-r--r--arch/mips/kernel/smtc.c260
-rw-r--r--arch/mips/kernel/syscall.c1
-rw-r--r--arch/mips/kernel/traps.c30
-rw-r--r--arch/mips/kernel/vmlinux.lds.S2
-rw-r--r--arch/mips/kernel/watch.c188
-rw-r--r--arch/mips/lasat/sysctl.c17
-rw-r--r--arch/mips/lib/csum_partial.S57
-rw-r--r--arch/mips/mti-malta/Makefile2
-rw-r--r--arch/mips/mti-malta/malta-smtc.c9
-rw-r--r--arch/mips/oprofile/common.c2
-rw-r--r--arch/mips/oprofile/op_impl.h2
-rw-r--r--arch/mips/oprofile/op_model_rm9000.c2
-rw-r--r--arch/mips/pci/Makefile2
-rw-r--r--arch/mips/pci/fixup-emma2rh.c1
-rw-r--r--arch/mips/pci/ops-pnx8550.c2
-rw-r--r--arch/mips/pci/pci-bcm47xx.c60
-rw-r--r--arch/mips/pci/pci-emma2rh.c1
-rw-r--r--arch/mips/pci/pci-ip27.c40
-rw-r--r--arch/mips/pci/pci-tx4938.c2
-rw-r--r--arch/mips/pci/pci-tx4939.c109
-rw-r--r--arch/mips/pci/pci.c80
-rw-r--r--arch/mips/pmc-sierra/msp71xx/Makefile1
-rw-r--r--arch/mips/pmc-sierra/msp71xx/gpio.c218
-rw-r--r--arch/mips/pmc-sierra/msp71xx/gpio_extended.c148
-rw-r--r--arch/mips/pmc-sierra/yosemite/setup.c30
-rw-r--r--arch/mips/rb532/devices.c22
-rw-r--r--arch/mips/rb532/gpio.c238
-rw-r--r--arch/mips/rb532/irq.c2
-rw-r--r--arch/mips/rb532/prom.c12
-rw-r--r--arch/mips/rb532/serial.c6
-rw-r--r--arch/mips/rb532/setup.c4
-rw-r--r--arch/mips/rb532/time.c1
-rw-r--r--arch/mips/sgi-ip22/ip22-platform.c15
-rw-r--r--arch/mips/sgi-ip22/ip22-setup.c1
-rw-r--r--arch/mips/sgi-ip22/ip22-time.c64
-rw-r--r--arch/mips/sgi-ip27/ip27-timer.c99
-rw-r--r--arch/mips/sgi-ip32/ip32-platform.c16
-rw-r--r--arch/mips/sgi-ip32/ip32-setup.c5
-rw-r--r--arch/mips/sibyte/common/sb_tbprof.c3
-rw-r--r--arch/mips/sibyte/swarm/Makefile3
-rw-r--r--arch/mips/sibyte/swarm/platform.c85
-rw-r--r--arch/mips/sibyte/swarm/rtc_m41t81.c26
-rw-r--r--arch/mips/sibyte/swarm/rtc_xicor1241.c26
-rw-r--r--arch/mips/txx9/Kconfig24
-rw-r--r--arch/mips/txx9/generic/Makefile2
-rw-r--r--arch/mips/txx9/generic/irq_tx4927.c11
-rw-r--r--arch/mips/txx9/generic/irq_tx4938.c11
-rw-r--r--arch/mips/txx9/generic/irq_tx4939.c215
-rw-r--r--arch/mips/txx9/generic/setup.c431
-rw-r--r--arch/mips/txx9/generic/setup_tx3927.c37
-rw-r--r--arch/mips/txx9/generic/setup_tx4927.c97
-rw-r--r--arch/mips/txx9/generic/setup_tx4938.c169
-rw-r--r--arch/mips/txx9/generic/setup_tx4939.c506
-rw-r--r--arch/mips/txx9/generic/spi_eeprom.c (renamed from arch/mips/txx9/rbtx4938/spi_eeprom.c)28
-rw-r--r--arch/mips/txx9/jmr3927/prom.c1
-rw-r--r--arch/mips/txx9/jmr3927/setup.c25
-rw-r--r--arch/mips/txx9/rbtx4927/irq.c11
-rw-r--r--arch/mips/txx9/rbtx4927/prom.c1
-rw-r--r--arch/mips/txx9/rbtx4927/setup.c25
-rw-r--r--arch/mips/txx9/rbtx4938/Makefile2
-rw-r--r--arch/mips/txx9/rbtx4938/irq.c8
-rw-r--r--arch/mips/txx9/rbtx4938/prom.c3
-rw-r--r--arch/mips/txx9/rbtx4938/setup.c64
-rw-r--r--arch/mips/txx9/rbtx4939/Makefile3
-rw-r--r--arch/mips/txx9/rbtx4939/irq.c96
-rw-r--r--arch/mips/txx9/rbtx4939/prom.c17
-rw-r--r--arch/mips/txx9/rbtx4939/setup.c307
608 files changed, 66193 insertions, 1087 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 49896a2a1d7..5f149b030c0 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -52,6 +52,7 @@ config BCM47XX
select SSB
select SSB_DRIVER_MIPS
select SSB_DRIVER_EXTIF
+ select SSB_EMBEDDED
select SSB_PCICORE_HOSTMODE if PCI
select GENERIC_GPIO
select SYS_HAS_EARLY_PRINTK
@@ -211,6 +212,7 @@ config MIPS_MALTA
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_MIPS_CMP if BROKEN # because SYNC_R4K is broken
select SYS_SUPPORTS_MULTITHREADING
select SYS_SUPPORTS_SMARTMIPS
help
@@ -567,7 +569,7 @@ config MIKROTIK_RB532
select SYS_SUPPORTS_LITTLE_ENDIAN
select SWAP_IO_SPACE
select BOOT_RAW
- select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
help
Support the Mikrotik(tm) RouterBoard 532 series,
based on the IDT RC32434 SoC.
@@ -597,7 +599,7 @@ config WR_PPMC
endchoice
-source "arch/mips/au1000/Kconfig"
+source "arch/mips/alchemy/Kconfig"
source "arch/mips/basler/excite/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/lasat/Kconfig"
@@ -609,11 +611,6 @@ source "arch/mips/vr41xx/Kconfig"
endmenu
-config GENERIC_LOCKBREAK
- bool
- default y
- depends on SMP && PREEMPT
-
config RWSEM_GENERIC_SPINLOCK
bool
default y
@@ -1272,6 +1269,13 @@ config CPU_SUPPORTS_32BIT_KERNEL
config CPU_SUPPORTS_64BIT_KERNEL
bool
+#
+# Set to y for ptrace access to watch registers.
+#
+config HARDWARE_WATCHPOINTS
+ bool
+ default y if CPU_MIPS32 || CPU_MIPS64
+
menu "Kernel type"
choice
@@ -1403,7 +1407,6 @@ config MIPS_MT_SMTC
depends on CPU_MIPS32_R2
#depends on CPU_MIPS64_R2 # once there is hardware ...
depends on SYS_SUPPORTS_MULTITHREADING
- select GENERIC_CLOCKEVENTS_BROADCAST
select CPU_MIPSR2_IRQ_VI
select CPU_MIPSR2_IRQ_EI
select MIPS_MT
@@ -1451,32 +1454,17 @@ config MIPS_VPE_LOADER
Includes a loader for loading an elf relocatable object
onto another VPE and running it.
-config MIPS_MT_SMTC_INSTANT_REPLAY
- bool "Low-latency Dispatch of Deferred SMTC IPIs"
- depends on MIPS_MT_SMTC && !PREEMPT
- default y
- help
- SMTC pseudo-interrupts between TCs are deferred and queued
- if the target TC is interrupt-inhibited (IXMT). In the first
- SMTC prototypes, these queued IPIs were serviced on return
- to user mode, or on entry into the kernel idle loop. The
- INSTANT_REPLAY option dispatches them as part of local_irq_restore()
- processing, which adds runtime overhead (hence the option to turn
- it off), but ensures that IPIs are handled promptly even under
- heavy I/O interrupt load.
-
config MIPS_MT_SMTC_IM_BACKSTOP
bool "Use per-TC register bits as backstop for inhibited IM bits"
depends on MIPS_MT_SMTC
- default y
+ default n
help
To support multiple TC microthreads acting as "CPUs" within
a VPE, VPE-wide interrupt mask bits must be specially manipulated
during interrupt handling. To support legacy drivers and interrupt
controller management code, SMTC has a "backstop" to track and
if necessary restore the interrupt mask. This has some performance
- impact on interrupt service overhead. Disable it only if you know
- what you are doing.
+ impact on interrupt service overhead.
config MIPS_MT_SMTC_IRQAFF
bool "Support IRQ affinity API"
@@ -1486,10 +1474,8 @@ config MIPS_MT_SMTC_IRQAFF
Enables SMP IRQ affinity API (/proc/irq/*/smp_affinity, etc.)
for SMTC Linux kernel. Requires platform support, of which
an example can be found in the MIPS kernel i8259 and Malta
- platform code. It is recommended that MIPS_MT_SMTC_INSTANT_REPLAY
- be enabled if MIPS_MT_SMTC_IRQAFF is used. Adds overhead to
- interrupt dispatch, and should be used only if you know what
- you are doing.
+ platform code. Adds some overhead to interrupt dispatch, and
+ should be used only if you know what you are doing.
config MIPS_VPE_LOADER_TOM
bool "Load VPE program into memory hidden from linux"
@@ -1517,6 +1503,18 @@ config MIPS_APSP_KSPD
"exit" syscall notifying other kernel modules the SP program is
exiting. You probably want to say yes here.
+config MIPS_CMP
+ bool "MIPS CMP framework support"
+ depends on SYS_SUPPORTS_MIPS_CMP
+ select SYNC_R4K if BROKEN
+ select SYS_SUPPORTS_SMP
+ select SYS_SUPPORTS_SCHED_SMT if SMP
+ select WEAK_ORDERING
+ default n
+ help
+ This is a placeholder option for the GCMP work. It will need to
+ be handled differently...
+
config SB1_PASS_1_WORKAROUNDS
bool
depends on CPU_SB1_PASS_1
@@ -1693,6 +1691,9 @@ config SMP
config SMP_UP
bool
+config SYS_SUPPORTS_MIPS_CMP
+ bool
+
config SYS_SUPPORTS_SMP
bool
@@ -1740,17 +1741,6 @@ config NR_CPUS
performance should round up your number of processors to the next
power of two.
-config MIPS_CMP
- bool "MIPS CMP framework support"
- depends on SMP
- select SYNC_R4K
- select SYS_SUPPORTS_SCHED_SMT
- select WEAK_ORDERING
- default n
- help
- This is a placeholder option for the GCMP work. It will need to
- be handled differently...
-
source "kernel/time/Kconfig"
#
@@ -1895,6 +1885,8 @@ config PROBE_INITRD_HEADER
add initrd or initramfs image to the kernel image.
Otherwise, say N.
+source "kernel/Kconfig.freezer"
+
menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
config HW_HAS_EISA
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 9aab51caf16..7f39fd8a91f 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -170,123 +170,123 @@ libs-$(CONFIG_SIBYTE_CFE) += arch/mips/sibyte/cfe/
# Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
#
core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/
-cflags-$(CONFIG_MACH_JAZZ) += -Iinclude/asm-mips/mach-jazz
+cflags-$(CONFIG_MACH_JAZZ) += -I$(srctree)/arch/mips/include/asm/mach-jazz
load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000
#
# Common Alchemy Au1x00 stuff
#
-core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/
-cflags-$(CONFIG_SOC_AU1X00) += -Iinclude/asm-mips/mach-au1x00
+core-$(CONFIG_SOC_AU1X00) += arch/mips/alchemy/common/
+cflags-$(CONFIG_SOC_AU1X00) += -I$(srctree)/arch/mips/include/asm/mach-au1x00
#
# AMD Alchemy Pb1000 eval board
#
-libs-$(CONFIG_MIPS_PB1000) += arch/mips/au1000/pb1000/
-cflags-$(CONFIG_MIPS_PB1000) += -Iinclude/asm-mips/mach-pb1x00
+libs-$(CONFIG_MIPS_PB1000) += arch/mips/alchemy/pb1000/
+cflags-$(CONFIG_MIPS_PB1000) += -I$(srctree)/arch/mips/include/asm/mach-pb1x00
load-$(CONFIG_MIPS_PB1000) += 0xffffffff80100000
#
# AMD Alchemy Pb1100 eval board
#
-libs-$(CONFIG_MIPS_PB1100) += arch/mips/au1000/pb1100/
-cflags-$(CONFIG_MIPS_PB1100) += -Iinclude/asm-mips/mach-pb1x00
+libs-$(CONFIG_MIPS_PB1100) += arch/mips/alchemy/pb1100/
+cflags-$(CONFIG_MIPS_PB1100) += -I$(srctree)/arch/mips/include/asm/mach-pb1x00
load-$(CONFIG_MIPS_PB1100) += 0xffffffff80100000
#
# AMD Alchemy Pb1500 eval board
#
-libs-$(CONFIG_MIPS_PB1500) += arch/mips/au1000/pb1500/
-cflags-$(CONFIG_MIPS_PB1500) += -Iinclude/asm-mips/mach-pb1x00
+libs-$(CONFIG_MIPS_PB1500) += arch/mips/alchemy/pb1500/
+cflags-$(CONFIG_MIPS_PB1500) += -I$(srctree)/arch/mips/include/asm/mach-pb1x00
load-$(CONFIG_MIPS_PB1500) += 0xffffffff80100000
#
# AMD Alchemy Pb1550 eval board
#
-libs-$(CONFIG_MIPS_PB1550) += arch/mips/au1000/pb1550/
-cflags-$(CONFIG_MIPS_PB1550) += -Iinclude/asm-mips/mach-pb1x00
+libs-$(CONFIG_MIPS_PB1550) += arch/mips/alchemy/pb1550/
+cflags-$(CONFIG_MIPS_PB1550) += -I$(srctree)/arch/mips/include/asm/mach-pb1x00
load-$(CONFIG_MIPS_PB1550) += 0xffffffff80100000
#
# AMD Alchemy Pb1200 eval board
#
-libs-$(CONFIG_MIPS_PB1200) += arch/mips/au1000/pb1200/
-cflags-$(CONFIG_MIPS_PB1200) += -Iinclude/asm-mips/mach-pb1x00
+libs-$(CONFIG_MIPS_PB1200) += arch/mips/alchemy/pb1200/
+cflags-$(CONFIG_MIPS_PB1200) += -I$(srctree)/arch/mips/include/asm/mach-pb1x00
load-$(CONFIG_MIPS_PB1200) += 0xffffffff80100000
#
# AMD Alchemy Db1000 eval board
#
-libs-$(CONFIG_MIPS_DB1000) += arch/mips/au1000/db1x00/
-cflags-$(CONFIG_MIPS_DB1000) += -Iinclude/asm-mips/mach-db1x00
+libs-$(CONFIG_MIPS_DB1000) += arch/mips/alchemy/db1x00/
+cflags-$(CONFIG_MIPS_DB1000) += -I$(srctree)/arch/mips/include/asm/mach-db1x00
load-$(CONFIG_MIPS_DB1000) += 0xffffffff80100000
#
# AMD Alchemy Db1100 eval board
#
-libs-$(CONFIG_MIPS_DB1100) += arch/mips/au1000/db1x00/
-cflags-$(CONFIG_MIPS_DB1100) += -Iinclude/asm-mips/mach-db1x00
+libs-$(CONFIG_MIPS_DB1100) += arch/mips/alchemy/db1x00/
+cflags-$(CONFIG_MIPS_DB1100) += -I$(srctree)/arch/mips/include/asm/mach-db1x00
load-$(CONFIG_MIPS_DB1100) += 0xffffffff80100000
#
# AMD Alchemy Db1500 eval board
#
-libs-$(CONFIG_MIPS_DB1500) += arch/mips/au1000/db1x00/
-cflags-$(CONFIG_MIPS_DB1500) += -Iinclude/asm-mips/mach-db1x00
+libs-$(CONFIG_MIPS_DB1500) += arch/mips/alchemy/db1x00/
+cflags-$(CONFIG_MIPS_DB1500) += -I$(srctree)/arch/mips/include/asm/mach-db1x00
load-$(CONFIG_MIPS_DB1500) += 0xffffffff80100000
#
# AMD Alchemy Db1550 eval board
#
-libs-$(CONFIG_MIPS_DB1550) += arch/mips/au1000/db1x00/
-cflags-$(CONFIG_MIPS_DB1550) += -Iinclude/asm-mips/mach-db1x00
+libs-$(CONFIG_MIPS_DB1550) += arch/mips/alchemy/db1x00/
+cflags-$(CONFIG_MIPS_DB1550) += -I$(srctree)/arch/mips/include/asm/mach-db1x00
load-$(CONFIG_MIPS_DB1550) += 0xffffffff80100000
#
# AMD Alchemy Db1200 eval board
#
-libs-$(CONFIG_MIPS_DB1200) += arch/mips/au1000/pb1200/
-cflags-$(CONFIG_MIPS_DB1200) += -Iinclude/asm-mips/mach-db1x00
+libs-$(CONFIG_MIPS_DB1200) += arch/mips/alchemy/pb1200/
+cflags-$(CONFIG_MIPS_DB1200) += -I$(srctree)/arch/mips/include/asm/mach-db1x00
load-$(CONFIG_MIPS_DB1200) += 0xffffffff80100000
#
# AMD Alchemy Bosporus eval board
#
-libs-$(CONFIG_MIPS_BOSPORUS) += arch/mips/au1000/db1x00/
-cflags-$(CONFIG_MIPS_BOSPORUS) += -Iinclude/asm-mips/mach-db1x00
+libs-$(CONFIG_MIPS_BOSPORUS) += arch/mips/alchemy/db1x00/
+cflags-$(CONFIG_MIPS_BOSPORUS) += -I$(srctree)/arch/mips/include/asm/mach-db1x00
load-$(CONFIG_MIPS_BOSPORUS) += 0xffffffff80100000
#
# AMD Alchemy Mirage eval board
#
-libs-$(CONFIG_MIPS_MIRAGE) += arch/mips/au1000/db1x00/
-cflags-$(CONFIG_MIPS_MIRAGE) += -Iinclude/asm-mips/mach-db1x00
+libs-$(CONFIG_MIPS_MIRAGE) += arch/mips/alchemy/db1x00/
+cflags-$(CONFIG_MIPS_MIRAGE) += -I$(srctree)/arch/mips/include/asm/mach-db1x00
load-$(CONFIG_MIPS_MIRAGE) += 0xffffffff80100000
#
# 4G-Systems eval board
#
-libs-$(CONFIG_MIPS_MTX1) += arch/mips/au1000/mtx-1/
+libs-$(CONFIG_MIPS_MTX1) += arch/mips/alchemy/mtx-1/
load-$(CONFIG_MIPS_MTX1) += 0xffffffff80100000
#
# MyCable eval board
#
-libs-$(CONFIG_MIPS_XXS1500) += arch/mips/au1000/xxs1500/
+libs-$(CONFIG_MIPS_XXS1500) += arch/mips/alchemy/xxs1500/
load-$(CONFIG_MIPS_XXS1500) += 0xffffffff80100000
#
# Cobalt Server
#
core-$(CONFIG_MIPS_COBALT) += arch/mips/cobalt/
-cflags-$(CONFIG_MIPS_COBALT) += -Iinclude/asm-mips/mach-cobalt
+cflags-$(CONFIG_MIPS_COBALT) += -I$(srctree)/arch/mips/include/asm/mach-cobalt
load-$(CONFIG_MIPS_COBALT) += 0xffffffff80080000
#
# DECstation family
#
core-$(CONFIG_MACH_DECSTATION) += arch/mips/dec/
-cflags-$(CONFIG_MACH_DECSTATION)+= -Iinclude/asm-mips/mach-dec
+cflags-$(CONFIG_MACH_DECSTATION)+= -I$(srctree)/arch/mips/include/asm/mach-dec
libs-$(CONFIG_MACH_DECSTATION) += arch/mips/dec/prom/
load-$(CONFIG_MACH_DECSTATION) += 0xffffffff80040000
@@ -294,7 +294,7 @@ load-$(CONFIG_MACH_DECSTATION) += 0xffffffff80040000
# Wind River PPMC Board (4KC + GT64120)
#
core-$(CONFIG_WR_PPMC) += arch/mips/gt64120/wrppmc/
-cflags-$(CONFIG_WR_PPMC) += -Iinclude/asm-mips/mach-wrppmc
+cflags-$(CONFIG_WR_PPMC) += -I$(srctree)/arch/mips/include/asm/mach-wrppmc
load-$(CONFIG_WR_PPMC) += 0xffffffff80100000
#
@@ -302,13 +302,13 @@ load-$(CONFIG_WR_PPMC) += 0xffffffff80100000
#
core-$(CONFIG_LEMOTE_FULONG) +=arch/mips/lemote/lm2e/
load-$(CONFIG_LEMOTE_FULONG) +=0xffffffff80100000
-cflags-$(CONFIG_LEMOTE_FULONG) += -Iinclude/asm-mips/mach-lemote
+cflags-$(CONFIG_LEMOTE_FULONG) += -I$(srctree)/arch/mips/include/asm/mach-lemote
#
# MIPS Malta board
#
core-$(CONFIG_MIPS_MALTA) += arch/mips/mti-malta/
-cflags-$(CONFIG_MIPS_MALTA) += -Iinclude/asm-mips/mach-malta
+cflags-$(CONFIG_MIPS_MALTA) += -I$(srctree)/arch/mips/include/asm/mach-malta
load-$(CONFIG_MIPS_MALTA) += 0xffffffff80100000
all-$(CONFIG_MIPS_MALTA) := vmlinux.bin
@@ -316,14 +316,14 @@ all-$(CONFIG_MIPS_MALTA) := vmlinux.bin
# MIPS SIM
#
core-$(CONFIG_MIPS_SIM) += arch/mips/mipssim/
-cflags-$(CONFIG_MIPS_SIM) += -Iinclude/asm-mips/mach-mipssim
+cflags-$(CONFIG_MIPS_SIM) += -I$(srctree)/arch/mips/include/asm/mach-mipssim
load-$(CONFIG_MIPS_SIM) += 0x80100000
#
# PMC-Sierra MSP SOCs
#
core-$(CONFIG_PMC_MSP) += arch/mips/pmc-sierra/msp71xx/
-cflags-$(CONFIG_PMC_MSP) += -Iinclude/asm-mips/pmc-sierra/msp71xx \
+cflags-$(CONFIG_PMC_MSP) += -I$(srctree)/arch/mips/include/asm/pmc-sierra/msp71xx \
-mno-branch-likely
load-$(CONFIG_PMC_MSP) += 0xffffffff80100000
@@ -331,28 +331,28 @@ load-$(CONFIG_PMC_MSP) += 0xffffffff80100000
# PMC-Sierra Yosemite
#
core-$(CONFIG_PMC_YOSEMITE) += arch/mips/pmc-sierra/yosemite/
-cflags-$(CONFIG_PMC_YOSEMITE) += -Iinclude/asm-mips/mach-yosemite
+cflags-$(CONFIG_PMC_YOSEMITE) += -I$(srctree)/arch/mips/include/asm/mach-yosemite
load-$(CONFIG_PMC_YOSEMITE) += 0xffffffff80100000
#
# Basler eXcite
#
core-$(CONFIG_BASLER_EXCITE) += arch/mips/basler/excite/
-cflags-$(CONFIG_BASLER_EXCITE) += -Iinclude/asm-mips/mach-excite
+cflags-$(CONFIG_BASLER_EXCITE) += -I$(srctree)/arch/mips/include/asm/mach-excite
load-$(CONFIG_BASLER_EXCITE) += 0x80100000
#
# LASAT platforms
#
core-$(CONFIG_LASAT) += arch/mips/lasat/
-cflags-$(CONFIG_LASAT) += -Iinclude/asm-mips/mach-lasat
+cflags-$(CONFIG_LASAT) += -I$(srctree)/arch/mips/include/asm/mach-lasat
load-$(CONFIG_LASAT) += 0xffffffff80000000
#
# Common VR41xx
#
core-$(CONFIG_MACH_VR41XX) += arch/mips/vr41xx/common/
-cflags-$(CONFIG_MACH_VR41XX) += -Iinclude/asm-mips/mach-vr41xx
+cflags-$(CONFIG_MACH_VR41XX) += -I$(srctree)/arch/mips/include/asm/mach-vr41xx
#
# ZAO Networks Capcella (VR4131)
@@ -385,13 +385,13 @@ load-$(CONFIG_TANBAC_TB022X) += 0xffffffff80000000
# Common NXP PNX8550
#
core-$(CONFIG_SOC_PNX8550) += arch/mips/nxp/pnx8550/common/
-cflags-$(CONFIG_SOC_PNX8550) += -Iinclude/asm-mips/mach-pnx8550
+cflags-$(CONFIG_SOC_PNX8550) += -I$(srctree)/arch/mips/include/asm/mach-pnx8550
#
# NXP PNX8550 JBS board
#
libs-$(CONFIG_PNX8550_JBS) += arch/mips/nxp/pnx8550/jbs/
-#cflags-$(CONFIG_PNX8550_JBS) += -Iinclude/asm-mips/mach-pnx8550
+#cflags-$(CONFIG_PNX8550_JBS) += -I$(srctree)/arch/mips/include/asm/mach-pnx8550
load-$(CONFIG_PNX8550_JBS) += 0xffffffff80060000
# NXP PNX8550 STB810 board
@@ -402,7 +402,7 @@ load-$(CONFIG_PNX8550_STB810) += 0xffffffff80060000
# NEC EMMA2RH boards
#
core-$(CONFIG_EMMA2RH) += arch/mips/emma2rh/common/
-cflags-$(CONFIG_EMMA2RH) += -Iinclude/asm-mips/mach-emma2rh
+cflags-$(CONFIG_EMMA2RH) += -I$(srctree)/arch/mips/include/asm/mach-emma2rh
# NEC EMMA2RH Mark-eins
core-$(CONFIG_MARKEINS) += arch/mips/emma2rh/markeins/
@@ -418,7 +418,7 @@ load-$(CONFIG_MARKEINS) += 0xffffffff88100000
# address by 8kb.
#
core-$(CONFIG_SGI_IP22) += arch/mips/sgi-ip22/
-cflags-$(CONFIG_SGI_IP22) += -Iinclude/asm-mips/mach-ip22
+cflags-$(CONFIG_SGI_IP22) += -I$(srctree)/arch/mips/include/asm/mach-ip22
ifdef CONFIG_32BIT
load-$(CONFIG_SGI_IP22) += 0xffffffff88002000
endif
@@ -435,7 +435,7 @@ endif
#
ifdef CONFIG_SGI_IP27
core-$(CONFIG_SGI_IP27) += arch/mips/sgi-ip27/
-cflags-$(CONFIG_SGI_IP27) += -Iinclude/asm-mips/mach-ip27
+cflags-$(CONFIG_SGI_IP27) += -I$(srctree)/arch/mips/include/asm/mach-ip27
ifdef CONFIG_MAPPED_KERNEL
load-$(CONFIG_SGI_IP27) += 0xc00000004001c000
OBJCOPYFLAGS := --change-addresses=0x3fffffff80000000
@@ -460,7 +460,7 @@ ifdef CONFIG_SGI_IP28
endif
endif
core-$(CONFIG_SGI_IP28) += arch/mips/sgi-ip22/
-cflags-$(CONFIG_SGI_IP28) += -mr10k-cache-barrier=1 -Iinclude/asm-mips/mach-ip28
+cflags-$(CONFIG_SGI_IP28) += -mr10k-cache-barrier=1 -I$(srctree)/arch/mips/include/asm/mach-ip28
load-$(CONFIG_SGI_IP28) += 0xa800000020004000
#
@@ -472,7 +472,7 @@ load-$(CONFIG_SGI_IP28) += 0xa800000020004000
# will break.
#
core-$(CONFIG_SGI_IP32) += arch/mips/sgi-ip32/
-cflags-$(CONFIG_SGI_IP32) += -Iinclude/asm-mips/mach-ip32
+cflags-$(CONFIG_SGI_IP32) += -I$(srctree)/arch/mips/include/asm/mach-ip32
load-$(CONFIG_SGI_IP32) += 0xffffffff80004000
#
@@ -484,22 +484,22 @@ load-$(CONFIG_SGI_IP32) += 0xffffffff80004000
#
core-$(CONFIG_SIBYTE_BCM112X) += arch/mips/sibyte/sb1250/
core-$(CONFIG_SIBYTE_BCM112X) += arch/mips/sibyte/common/
-cflags-$(CONFIG_SIBYTE_BCM112X) += -Iinclude/asm-mips/mach-sibyte \
+cflags-$(CONFIG_SIBYTE_BCM112X) += -I$(srctree)/arch/mips/include/asm/mach-sibyte \
-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
core-$(CONFIG_SIBYTE_SB1250) += arch/mips/sibyte/sb1250/
core-$(CONFIG_SIBYTE_SB1250) += arch/mips/sibyte/common/
-cflags-$(CONFIG_SIBYTE_SB1250) += -Iinclude/asm-mips/mach-sibyte \
+cflags-$(CONFIG_SIBYTE_SB1250) += -I$(srctree)/arch/mips/include/asm/mach-sibyte \
-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
core-$(CONFIG_SIBYTE_BCM1x55) += arch/mips/sibyte/bcm1480/
core-$(CONFIG_SIBYTE_BCM1x55) += arch/mips/sibyte/common/
-cflags-$(CONFIG_SIBYTE_BCM1x55) += -Iinclude/asm-mips/mach-sibyte \
+cflags-$(CONFIG_SIBYTE_BCM1x55) += -I$(srctree)/arch/mips/include/asm/mach-sibyte \
-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
core-$(CONFIG_SIBYTE_BCM1x80) += arch/mips/sibyte/bcm1480/
core-$(CONFIG_SIBYTE_BCM1x80) += arch/mips/sibyte/common/
-cflags-$(CONFIG_SIBYTE_BCM1x80) += -Iinclude/asm-mips/mach-sibyte \
+cflags-$(CONFIG_SIBYTE_BCM1x80) += -I$(srctree)/arch/mips/include/asm/mach-sibyte \
-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
#
@@ -529,14 +529,14 @@ load-$(CONFIG_SIBYTE_BIGSUR) := 0xffffffff80100000
# Broadcom BCM47XX boards
#
core-$(CONFIG_BCM47XX) += arch/mips/bcm47xx/
-cflags-$(CONFIG_BCM47XX) += -Iinclude/asm-mips/mach-bcm47xx
+cflags-$(CONFIG_BCM47XX) += -I$(srctree)/arch/mips/include/asm/mach-bcm47xx
load-$(CONFIG_BCM47XX) := 0xffffffff80001000
#
# SNI RM
#
core-$(CONFIG_SNI_RM) += arch/mips/sni/
-cflags-$(CONFIG_SNI_RM) += -Iinclude/asm-mips/mach-rm
+cflags-$(CONFIG_SNI_RM) += -I$(srctree)/arch/mips/include/asm/mach-rm
ifdef CONFIG_CPU_LITTLE_ENDIAN
load-$(CONFIG_SNI_RM) += 0xffffffff80600000
else
@@ -548,10 +548,10 @@ all-$(CONFIG_SNI_RM) := vmlinux.ecoff
# Common TXx9
#
core-$(CONFIG_MACH_TX39XX) += arch/mips/txx9/generic/
-cflags-$(CONFIG_MACH_TX39XX) += -Iinclude/asm-mips/mach-tx39xx
+cflags-$(CONFIG_MACH_TX39XX) += -I$(srctree)/arch/mips/include/asm/mach-tx39xx
load-$(CONFIG_MACH_TX39XX) += 0xffffffff80050000
core-$(CONFIG_MACH_TX49XX) += arch/mips/txx9/generic/
-cflags-$(CONFIG_MACH_TX49XX) += -Iinclude/asm-mips/mach-tx49xx
+cflags-$(CONFIG_MACH_TX49XX) += -I$(srctree)/arch/mips/include/asm/mach-tx49xx
load-$(CONFIG_MACH_TX49XX) += 0xffffffff80100000
#
@@ -563,21 +563,17 @@ core-$(CONFIG_TOSHIBA_JMR3927) += arch/mips/txx9/jmr3927/
# Routerboard 532 board
#
core-$(CONFIG_MIKROTIK_RB532) += arch/mips/rb532/
-cflags-$(CONFIG_MIKROTIK_RB532) += -Iinclude/asm-mips/mach-rc32434
+cflags-$(CONFIG_MIKROTIK_RB532) += -I$(srctree)/arch/mips/include/asm/mach-rc32434
load-$(CONFIG_MIKROTIK_RB532) += 0xffffffff80101000
#
-# Toshiba RBTX4927 board or
-# Toshiba RBTX4937 board
+# Toshiba RBTX49XX boards
#
core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/txx9/rbtx4927/
-
-#
-# Toshiba RBTX4938 board
-#
core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/txx9/rbtx4938/
+core-$(CONFIG_TOSHIBA_RBTX4939) += arch/mips/txx9/rbtx4939/
-cflags-y += -Iinclude/asm-mips/mach-generic
+cflags-y += -I$(srctree)/arch/mips/include/asm/mach-generic
drivers-$(CONFIG_PCI) += arch/mips/pci/
ifdef CONFIG_32BIT
diff --git a/arch/mips/au1000/Kconfig b/arch/mips/alchemy/Kconfig
index e4a057d80ab..e4a057d80ab 100644
--- a/arch/mips/au1000/Kconfig
+++ b/arch/mips/alchemy/Kconfig
diff --git a/arch/mips/au1000/common/Makefile b/arch/mips/alchemy/common/Makefile
index df48fd65bbf..df48fd65bbf 100644
--- a/arch/mips/au1000/common/Makefile
+++ b/arch/mips/alchemy/common/Makefile
diff --git a/arch/mips/au1000/common/au1xxx_irqmap.c b/arch/mips/alchemy/common/au1xxx_irqmap.c
index c7ca1596394..c7ca1596394 100644
--- a/arch/mips/au1000/common/au1xxx_irqmap.c
+++ b/arch/mips/alchemy/common/au1xxx_irqmap.c
diff --git a/arch/mips/au1000/common/clocks.c b/arch/mips/alchemy/common/clocks.c
index 043429d17c5..043429d17c5 100644
--- a/arch/mips/au1000/common/clocks.c
+++ b/arch/mips/alchemy/common/clocks.c
diff --git a/arch/mips/au1000/common/cputable.c b/arch/mips/alchemy/common/cputable.c
index ba6430bc2d0..ba6430bc2d0 100644
--- a/arch/mips/au1000/common/cputable.c
+++ b/arch/mips/alchemy/common/cputable.c
diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c
index 601ee9180ee..601ee9180ee 100644
--- a/arch/mips/au1000/common/dbdma.c
+++ b/arch/mips/alchemy/common/dbdma.c
diff --git a/arch/mips/au1000/common/dma.c b/arch/mips/alchemy/common/dma.c
index d6fbda232e6..d6fbda232e6 100644
--- a/arch/mips/au1000/common/dma.c
+++ b/arch/mips/alchemy/common/dma.c
diff --git a/arch/mips/au1000/common/gpio.c b/arch/mips/alchemy/common/gpio.c
index b485d94ce8a..e660ddd611c 100644
--- a/arch/mips/au1000/common/gpio.c
+++ b/arch/mips/alchemy/common/gpio.c
@@ -48,7 +48,7 @@ static void au1xxx_gpio2_write(unsigned gpio, int value)
{
gpio -= AU1XXX_GPIO_BASE;
- gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | (value << gpio);
+ gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio);
}
static int au1xxx_gpio2_direction_input(unsigned gpio)
@@ -61,7 +61,8 @@ static int au1xxx_gpio2_direction_input(unsigned gpio)
static int au1xxx_gpio2_direction_output(unsigned gpio, int value)
{
gpio -= AU1XXX_GPIO_BASE;
- gpio2->dir = (0x01 << gpio) | (value << gpio);
+ gpio2->dir |= 0x01 << gpio;
+ gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio);
return 0;
}
@@ -90,6 +91,7 @@ static int au1xxx_gpio1_direction_input(unsigned gpio)
static int au1xxx_gpio1_direction_output(unsigned gpio, int value)
{
gpio1->trioutclr = (0x01 & gpio);
+ au1xxx_gpio1_write(gpio, value);
return 0;
}
diff --git a/arch/mips/au1000/common/irq.c b/arch/mips/alchemy/common/irq.c
index 40c6ceceb5f..40c6ceceb5f 100644
--- a/arch/mips/au1000/common/irq.c
+++ b/arch/mips/alchemy/common/irq.c
diff --git a/arch/mips/au1000/common/pci.c b/arch/mips/alchemy/common/pci.c
index 7866cf50cf9..7866cf50cf9 100644
--- a/arch/mips/au1000/common/pci.c
+++ b/arch/mips/alchemy/common/pci.c
diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/alchemy/common/platform.c
index dc8a67efac2..dc8a67efac2 100644
--- a/arch/mips/au1000/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
diff --git a/arch/mips/au1000/common/power.c b/arch/mips/alchemy/common/power.c
index bd854a6d1d8..bd854a6d1d8 100644
--- a/arch/mips/au1000/common/power.c
+++ b/arch/mips/alchemy/common/power.c
diff --git a/arch/mips/au1000/common/prom.c b/arch/mips/alchemy/common/prom.c
index 18b310b475c..18b310b475c 100644
--- a/arch/mips/au1000/common/prom.c
+++ b/arch/mips/alchemy/common/prom.c
diff --git a/arch/mips/au1000/common/puts.c b/arch/mips/alchemy/common/puts.c
index 55bbe24d45b..55bbe24d45b 100644
--- a/arch/mips/au1000/common/puts.c
+++ b/arch/mips/alchemy/common/puts.c
diff --git a/arch/mips/au1000/common/reset.c b/arch/mips/alchemy/common/reset.c
index d555429c8d6..d555429c8d6 100644
--- a/arch/mips/au1000/common/reset.c
+++ b/arch/mips/alchemy/common/reset.c
diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/alchemy/common/setup.c
index 1ac6b06f42a..1ac6b06f42a 100644
--- a/arch/mips/au1000/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
diff --git a/arch/mips/au1000/common/sleeper.S b/arch/mips/alchemy/common/sleeper.S
index 4b3cf021a45..3006e270c8b 100644
--- a/arch/mips/au1000/common/sleeper.S
+++ b/arch/mips/alchemy/common/sleeper.S
@@ -79,12 +79,12 @@ LEAF(save_and_sleep)
/* Put SDRAM into self refresh. Preload instructions into cache,
* issue a precharge, then auto refresh, then sleep commands to it.
*/
- la t0, sdsleep
+ la t0, sdsleep
.set mips3
- cache 0x14, 0(t0)
- cache 0x14, 32(t0)
- cache 0x14, 64(t0)
- cache 0x14, 96(t0)
+ cache 0x14, 0(t0)
+ cache 0x14, 32(t0)
+ cache 0x14, 64(t0)
+ cache 0x14, 96(t0)
.set mips0
sdsleep:
diff --git a/arch/mips/au1000/common/time.c b/arch/mips/alchemy/common/time.c
index 563d9390a87..563d9390a87 100644
--- a/arch/mips/au1000/common/time.c
+++ b/arch/mips/alchemy/common/time.c
diff --git a/arch/mips/au1000/db1x00/Makefile b/arch/mips/alchemy/db1x00/Makefile
index 274db3b55d8..274db3b55d8 100644
--- a/arch/mips/au1000/db1x00/Makefile
+++ b/arch/mips/alchemy/db1x00/Makefile
diff --git a/arch/mips/au1000/db1x00/board_setup.c b/arch/mips/alchemy/db1x00/board_setup.c
index 9e5ccbbfced..9e5ccbbfced 100644
--- a/arch/mips/au1000/db1x00/board_setup.c
+++ b/arch/mips/alchemy/db1x00/board_setup.c
diff --git a/arch/mips/au1000/db1x00/init.c b/arch/mips/alchemy/db1x00/init.c
index 84741351496..84741351496 100644
--- a/arch/mips/au1000/db1x00/init.c
+++ b/arch/mips/alchemy/db1x00/init.c
diff --git a/arch/mips/au1000/db1x00/irqmap.c b/arch/mips/alchemy/db1x00/irqmap.c
index 94c090e8bf7..94c090e8bf7 100644
--- a/arch/mips/au1000/db1x00/irqmap.c
+++ b/arch/mips/alchemy/db1x00/irqmap.c
diff --git a/arch/mips/au1000/mtx-1/Makefile b/arch/mips/alchemy/mtx-1/Makefile
index 7c67b3d33be..7c67b3d33be 100644
--- a/arch/mips/au1000/mtx-1/Makefile
+++ b/arch/mips/alchemy/mtx-1/Makefile
diff --git a/arch/mips/au1000/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c
index 3f8079186cf..3f8079186cf 100644
--- a/arch/mips/au1000/mtx-1/board_setup.c
+++ b/arch/mips/alchemy/mtx-1/board_setup.c
diff --git a/arch/mips/au1000/mtx-1/init.c b/arch/mips/alchemy/mtx-1/init.c
index 3bae13c2895..3bae13c2895 100644
--- a/arch/mips/au1000/mtx-1/init.c
+++ b/arch/mips/alchemy/mtx-1/init.c
diff --git a/arch/mips/au1000/mtx-1/irqmap.c b/arch/mips/alchemy/mtx-1/irqmap.c
index f2bf02951e9..f2bf02951e9 100644
--- a/arch/mips/au1000/mtx-1/irqmap.c
+++ b/arch/mips/alchemy/mtx-1/irqmap.c
diff --git a/arch/mips/au1000/mtx-1/platform.c b/arch/mips/alchemy/mtx-1/platform.c
index 8b5914d1241..8b5914d1241 100644
--- a/arch/mips/au1000/mtx-1/platform.c
+++ b/arch/mips/alchemy/mtx-1/platform.c
diff --git a/arch/mips/au1000/pb1000/Makefile b/arch/mips/alchemy/pb1000/Makefile
index 99bbec0ca41..99bbec0ca41 100644
--- a/arch/mips/au1000/pb1000/Makefile
+++ b/arch/mips/alchemy/pb1000/Makefile
diff --git a/arch/mips/au1000/pb1000/board_setup.c b/arch/mips/alchemy/pb1000/board_setup.c
index 25df167a95b..25df167a95b 100644
--- a/arch/mips/au1000/pb1000/board_setup.c
+++ b/arch/mips/alchemy/pb1000/board_setup.c
diff --git a/arch/mips/au1000/pb1000/init.c b/arch/mips/alchemy/pb1000/init.c
index 8a9c7d57208..8a9c7d57208 100644
--- a/arch/mips/au1000/pb1000/init.c
+++ b/arch/mips/alchemy/pb1000/init.c
diff --git a/arch/mips/au1000/pb1000/irqmap.c b/arch/mips/alchemy/pb1000/irqmap.c
index b3d56b0af32..b3d56b0af32 100644
--- a/arch/mips/au1000/pb1000/irqmap.c
+++ b/arch/mips/alchemy/pb1000/irqmap.c
diff --git a/arch/mips/au1000/pb1100/Makefile b/arch/mips/alchemy/pb1100/Makefile
index 793e97c49e4..793e97c49e4 100644
--- a/arch/mips/au1000/pb1100/Makefile
+++ b/arch/mips/alchemy/pb1100/Makefile
diff --git a/arch/mips/au1000/pb1100/board_setup.c b/arch/mips/alchemy/pb1100/board_setup.c
index c0bfd59a7a3..c0bfd59a7a3 100644
--- a/arch/mips/au1000/pb1100/board_setup.c
+++ b/arch/mips/alchemy/pb1100/board_setup.c
diff --git a/arch/mips/au1000/pb1100/init.c b/arch/mips/alchemy/pb1100/init.c
index 7c6792308bc..7c6792308bc 100644
--- a/arch/mips/au1000/pb1100/init.c
+++ b/arch/mips/alchemy/pb1100/init.c
diff --git a/arch/mips/au1000/pb1100/irqmap.c b/arch/mips/alchemy/pb1100/irqmap.c
index 9b7dd8b4128..9b7dd8b4128 100644
--- a/arch/mips/au1000/pb1100/irqmap.c
+++ b/arch/mips/alchemy/pb1100/irqmap.c
diff --git a/arch/mips/au1000/pb1200/Makefile b/arch/mips/alchemy/pb1200/Makefile
index d678adf7ce8..d678adf7ce8 100644
--- a/arch/mips/au1000/pb1200/Makefile
+++ b/arch/mips/alchemy/pb1200/Makefile
diff --git a/arch/mips/au1000/pb1200/board_setup.c b/arch/mips/alchemy/pb1200/board_setup.c
index 6cb2115059a..6cb2115059a 100644
--- a/arch/mips/au1000/pb1200/board_setup.c
+++ b/arch/mips/alchemy/pb1200/board_setup.c
diff --git a/arch/mips/au1000/pb1200/init.c b/arch/mips/alchemy/pb1200/init.c
index e9b2a0fd48a..e9b2a0fd48a 100644
--- a/arch/mips/au1000/pb1200/init.c
+++ b/arch/mips/alchemy/pb1200/init.c
diff --git a/arch/mips/au1000/pb1200/irqmap.c b/arch/mips/alchemy/pb1200/irqmap.c
index 2a505ad8715..2a505ad8715 100644
--- a/arch/mips/au1000/pb1200/irqmap.c
+++ b/arch/mips/alchemy/pb1200/irqmap.c
diff --git a/arch/mips/au1000/pb1200/platform.c b/arch/mips/alchemy/pb1200/platform.c
index f8fb0aeac57..f8fb0aeac57 100644
--- a/arch/mips/au1000/pb1200/platform.c
+++ b/arch/mips/alchemy/pb1200/platform.c
diff --git a/arch/mips/au1000/pb1500/Makefile b/arch/mips/alchemy/pb1500/Makefile
index 602f38df20b..602f38df20b 100644
--- a/arch/mips/au1000/pb1500/Makefile
+++ b/arch/mips/alchemy/pb1500/Makefile
diff --git a/arch/mips/au1000/pb1500/board_setup.c b/arch/mips/alchemy/pb1500/board_setup.c
index 035771c6e5b..035771c6e5b 100644
--- a/arch/mips/au1000/pb1500/board_setup.c
+++ b/arch/mips/alchemy/pb1500/board_setup.c
diff --git a/arch/mips/au1000/pb1500/init.c b/arch/mips/alchemy/pb1500/init.c
index 3b6e395cf95..3b6e395cf95 100644
--- a/arch/mips/au1000/pb1500/init.c
+++ b/arch/mips/alchemy/pb1500/init.c
diff --git a/arch/mips/au1000/pb1500/irqmap.c b/arch/mips/alchemy/pb1500/irqmap.c
index 39c4682766a..39c4682766a 100644
--- a/arch/mips/au1000/pb1500/irqmap.c
+++ b/arch/mips/alchemy/pb1500/irqmap.c
diff --git a/arch/mips/au1000/pb1550/Makefile b/arch/mips/alchemy/pb1550/Makefile
index 7d8beca87fa..7d8beca87fa 100644
--- a/arch/mips/au1000/pb1550/Makefile
+++ b/arch/mips/alchemy/pb1550/Makefile
diff --git a/arch/mips/au1000/pb1550/board_setup.c b/arch/mips/alchemy/pb1550/board_setup.c
index 0ed76b64b6a..0ed76b64b6a 100644
--- a/arch/mips/au1000/pb1550/board_setup.c
+++ b/arch/mips/alchemy/pb1550/board_setup.c
diff --git a/arch/mips/au1000/pb1550/init.c b/arch/mips/alchemy/pb1550/init.c
index e1055a13a1a..e1055a13a1a 100644
--- a/arch/mips/au1000/pb1550/init.c
+++ b/arch/mips/alchemy/pb1550/init.c
diff --git a/arch/mips/au1000/pb1550/irqmap.c b/arch/mips/alchemy/pb1550/irqmap.c
index a02a4d1fa89..a02a4d1fa89 100644
--- a/arch/mips/au1000/pb1550/irqmap.c
+++ b/arch/mips/alchemy/pb1550/irqmap.c
diff --git a/arch/mips/au1000/xxs1500/Makefile b/arch/mips/alchemy/xxs1500/Makefile
index db3c526f64d..db3c526f64d 100644
--- a/arch/mips/au1000/xxs1500/Makefile
+++ b/arch/mips/alchemy/xxs1500/Makefile
diff --git a/arch/mips/au1000/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c
index 4c587acac5c..4c587acac5c 100644
--- a/arch/mips/au1000/xxs1500/board_setup.c
+++ b/arch/mips/alchemy/xxs1500/board_setup.c
diff --git a/arch/mips/au1000/xxs1500/init.c b/arch/mips/alchemy/xxs1500/init.c
index 7516434760a..7516434760a 100644
--- a/arch/mips/au1000/xxs1500/init.c
+++ b/arch/mips/alchemy/xxs1500/init.c
diff --git a/arch/mips/au1000/xxs1500/irqmap.c b/arch/mips/alchemy/xxs1500/irqmap.c
index edf06ed1187..edf06ed1187 100644
--- a/arch/mips/au1000/xxs1500/irqmap.c
+++ b/arch/mips/alchemy/xxs1500/irqmap.c
diff --git a/arch/mips/bcm47xx/gpio.c b/arch/mips/bcm47xx/gpio.c
index f5a53acf995..9b798800258 100644
--- a/arch/mips/bcm47xx/gpio.c
+++ b/arch/mips/bcm47xx/gpio.c
@@ -12,68 +12,51 @@
#include <asm/mach-bcm47xx/bcm47xx.h>
#include <asm/mach-bcm47xx/gpio.h>
-int bcm47xx_gpio_to_irq(unsigned gpio)
+#if (BCM47XX_CHIPCO_GPIO_LINES > BCM47XX_EXTIF_GPIO_LINES)
+static DECLARE_BITMAP(gpio_in_use, BCM47XX_CHIPCO_GPIO_LINES);
+#else
+static DECLARE_BITMAP(gpio_in_use, BCM47XX_EXTIF_GPIO_LINES);
+#endif
+
+int gpio_request(unsigned gpio, const char *tag)
{
- if (ssb_bcm47xx.chipco.dev)
- return ssb_mips_irq(ssb_bcm47xx.chipco.dev) + 2;
- else if (ssb_bcm47xx.extif.dev)
- return ssb_mips_irq(ssb_bcm47xx.extif.dev) + 2;
- else
+ if (ssb_chipco_available(&ssb_bcm47xx.chipco) &&
+ ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
return -EINVAL;
-}
-EXPORT_SYMBOL_GPL(bcm47xx_gpio_to_irq);
-int bcm47xx_gpio_get_value(unsigned gpio)
-{
- if (ssb_bcm47xx.chipco.dev)
- return ssb_chipco_gpio_in(&ssb_bcm47xx.chipco, 1 << gpio);
- else if (ssb_bcm47xx.extif.dev)
- return ssb_extif_gpio_in(&ssb_bcm47xx.extif, 1 << gpio);
- else
- return 0;
-}
-EXPORT_SYMBOL_GPL(bcm47xx_gpio_get_value);
+ if (ssb_extif_available(&ssb_bcm47xx.extif) &&
+ ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
+ return -EINVAL;
-void bcm47xx_gpio_set_value(unsigned gpio, int value)
-{
- if (ssb_bcm47xx.chipco.dev)
- ssb_chipco_gpio_out(&ssb_bcm47xx.chipco,
- 1 << gpio,
- value ? 1 << gpio : 0);
- else if (ssb_bcm47xx.extif.dev)
- ssb_extif_gpio_out(&ssb_bcm47xx.extif,
- 1 << gpio,
- value ? 1 << gpio : 0);
-}
-EXPORT_SYMBOL_GPL(bcm47xx_gpio_set_value);
+ if (test_and_set_bit(gpio, gpio_in_use))
+ return -EBUSY;
-int bcm47xx_gpio_direction_input(unsigned gpio)
-{
- if (ssb_bcm47xx.chipco.dev && (gpio < BCM47XX_CHIPCO_GPIO_LINES))
- ssb_chipco_gpio_outen(&ssb_bcm47xx.chipco,
- 1 << gpio, 0);
- else if (ssb_bcm47xx.extif.dev && (gpio < BCM47XX_EXTIF_GPIO_LINES))
- ssb_extif_gpio_outen(&ssb_bcm47xx.extif,
- 1 << gpio, 0);
- else
- return -EINVAL;
return 0;
}
-EXPORT_SYMBOL_GPL(bcm47xx_gpio_direction_input);
+EXPORT_SYMBOL(gpio_request);
-int bcm47xx_gpio_direction_output(unsigned gpio, int value)
+void gpio_free(unsigned gpio)
{
- bcm47xx_gpio_set_value(gpio, value);
+ if (ssb_chipco_available(&ssb_bcm47xx.chipco) &&
+ ((unsigned)gpio >= BCM47XX_CHIPCO_GPIO_LINES))
+ return;
+
+ if (ssb_extif_available(&ssb_bcm47xx.extif) &&
+ ((unsigned)gpio >= BCM47XX_EXTIF_GPIO_LINES))
+ return;
+
+ clear_bit(gpio, gpio_in_use);
+}
+EXPORT_SYMBOL(gpio_free);
- if (ssb_bcm47xx.chipco.dev && (gpio < BCM47XX_CHIPCO_GPIO_LINES))
- ssb_chipco_gpio_outen(&ssb_bcm47xx.chipco,
- 1 << gpio, 1 << gpio);
- else if (ssb_bcm47xx.extif.dev && (gpio < BCM47XX_EXTIF_GPIO_LINES))
- ssb_extif_gpio_outen(&ssb_bcm47xx.extif,
- 1 << gpio, 1 << gpio);
+int gpio_to_irq(unsigned gpio)
+{
+ if (ssb_chipco_available(&ssb_bcm47xx.chipco))
+ return ssb_mips_irq(ssb_bcm47xx.chipco.dev) + 2;
+ else if (ssb_extif_available(&ssb_bcm47xx.extif))
+ return ssb_mips_irq(ssb_bcm47xx.extif.dev) + 2;
else
return -EINVAL;
- return 0;
}
-EXPORT_SYMBOL_GPL(bcm47xx_gpio_direction_output);
+EXPORT_SYMBOL_GPL(gpio_to_irq);
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index 8d36f186890..2f580fa160c 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -27,6 +27,7 @@
#include <linux/types.h>
#include <linux/ssb/ssb.h>
+#include <linux/ssb/ssb_embedded.h>
#include <asm/bootinfo.h>
#include <asm/reboot.h>
#include <asm/time.h>
@@ -41,7 +42,7 @@ static void bcm47xx_machine_restart(char *command)
printk(KERN_ALERT "Please stand by while rebooting the system...\n");
local_irq_disable();
/* Set the watchdog timer to reset immediately */
- ssb_chipco_watchdog_timer_set(&ssb_bcm47xx.chipco, 1);
+ ssb_watchdog_timer_set(&ssb_bcm47xx, 1);
while (1)
cpu_relax();
}
@@ -50,7 +51,7 @@ static void bcm47xx_machine_halt(void)
{
/* Disable interrupts and watchdog and spin forever */
local_irq_disable();
- ssb_chipco_watchdog_timer_set(&ssb_bcm47xx.chipco, 0);
+ ssb_watchdog_timer_set(&ssb_bcm47xx, 0);
while (1)
cpu_relax();
}
diff --git a/arch/mips/bcm47xx/wgt634u.c b/arch/mips/bcm47xx/wgt634u.c
index d1d90c9ef2f..ef00e7f58c2 100644
--- a/arch/mips/bcm47xx/wgt634u.c
+++ b/arch/mips/bcm47xx/wgt634u.c
@@ -11,6 +11,9 @@
#include <linux/leds.h>
#include <linux/mtd/physmap.h>
#include <linux/ssb/ssb.h>
+#include <linux/interrupt.h>
+#include <linux/reboot.h>
+#include <linux/gpio.h>
#include <asm/mach-bcm47xx/bcm47xx.h>
/* GPIO definitions for the WGT634U */
@@ -99,6 +102,30 @@ static struct platform_device *wgt634u_devices[] __initdata = {
&wgt634u_gpio_leds,
};
+static irqreturn_t gpio_interrupt(int irq, void *ignored)
+{
+ int state;
+
+ /* Interrupts are shared, check if the current one is
+ a GPIO interrupt. */
+ if (!ssb_chipco_irq_status(&ssb_bcm47xx.chipco,
+ SSB_CHIPCO_IRQ_GPIO))
+ return IRQ_NONE;
+
+ state = gpio_get_value(WGT634U_GPIO_RESET);
+
+ /* Interrupt are level triggered, revert the interrupt polarity
+ to clear the interrupt. */
+ gpio_polarity(WGT634U_GPIO_RESET, state);
+
+ if (!state) {
+ printk(KERN_INFO "Reset button pressed");
+ ctrl_alt_del();
+ }
+
+ return IRQ_HANDLED;
+}
+
static int __init wgt634u_init(void)
{
/* There is no easy way to detect that we are running on a WGT634U
@@ -112,6 +139,19 @@ static int __init wgt634u_init(void)
((et0mac[1] == 0x09 && et0mac[2] == 0x5b) ||
(et0mac[1] == 0x0f && et0mac[2] == 0xb5))) {
struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
+
+ printk(KERN_INFO "WGT634U machine detected.\n");
+
+ if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
+ gpio_interrupt, IRQF_SHARED,
+ "WGT634U GPIO", &ssb_bcm47xx.chipco)) {
+ gpio_direction_input(WGT634U_GPIO_RESET);
+ gpio_intmask(WGT634U_GPIO_RESET, 1);
+ ssb_chipco_irq_mask(&ssb_bcm47xx.chipco,
+ SSB_CHIPCO_IRQ_GPIO,
+ SSB_CHIPCO_IRQ_GPIO);
+ }
+
wgt634u_flash_data.width = mcore->flash_buswidth;
wgt634u_flash_resource.start = mcore->flash_window;
wgt634u_flash_resource.end = mcore->flash_window
diff --git a/arch/mips/dec/time.c b/arch/mips/dec/time.c
index 3965fda94a8..1359c03ded5 100644
--- a/arch/mips/dec/time.c
+++ b/arch/mips/dec/time.c
@@ -45,12 +45,12 @@ unsigned long read_persistent_clock(void)
spin_unlock_irqrestore(&rtc_lock, flags);
if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
- sec = BCD2BIN(sec);
- min = BCD2BIN(min);
- hour = BCD2BIN(hour);
- day = BCD2BIN(day);
- mon = BCD2BIN(mon);
- year = BCD2BIN(year);
+ sec = bcd2bin(sec);
+ min = bcd2bin(min);
+ hour = bcd2bin(hour);
+ day = bcd2bin(day);
+ mon = bcd2bin(mon);
+ year = bcd2bin(year);
}
year += real_year - 72 + 2000;
@@ -83,7 +83,7 @@ int rtc_mips_set_mmss(unsigned long nowtime)
cmos_minutes = CMOS_READ(RTC_MINUTES);
if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
- cmos_minutes = BCD2BIN(cmos_minutes);
+ cmos_minutes = bcd2bin(cmos_minutes);
/*
* since we're only adjusting minutes and seconds,
@@ -99,8 +99,8 @@ int rtc_mips_set_mmss(unsigned long nowtime)
if (abs(real_minutes - cmos_minutes) < 30) {
if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
- real_seconds = BIN2BCD(real_seconds);
- real_minutes = BIN2BCD(real_minutes);
+ real_seconds = bin2bcd(real_seconds);
+ real_minutes = bin2bcd(real_minutes);
}
CMOS_WRITE(real_seconds, RTC_SECONDS);
CMOS_WRITE(real_minutes, RTC_MINUTES);
diff --git a/arch/mips/emma2rh/common/irq.c b/arch/mips/emma2rh/common/irq.c
index d9560477366..91cbd959ab6 100644
--- a/arch/mips/emma2rh/common/irq.c
+++ b/arch/mips/emma2rh/common/irq.c
@@ -29,7 +29,6 @@
#include <asm/system.h>
#include <asm/mipsregs.h>
-#include <asm/debug.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
diff --git a/arch/mips/emma2rh/common/prom.c b/arch/mips/emma2rh/common/prom.c
index 5e92b3a9c5b..e14a2e3d884 100644
--- a/arch/mips/emma2rh/common/prom.c
+++ b/arch/mips/emma2rh/common/prom.c
@@ -30,7 +30,6 @@
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
#include <asm/emma2rh/emma2rh.h>
-#include <asm/debug.h>
const char *get_system_type(void)
{
diff --git a/arch/mips/emma2rh/markeins/platform.c b/arch/mips/emma2rh/markeins/platform.c
index d70627de7cf..fb9cda253ab 100644
--- a/arch/mips/emma2rh/markeins/platform.c
+++ b/arch/mips/emma2rh/markeins/platform.c
@@ -35,7 +35,6 @@
#include <asm/irq.h>
#include <asm/reboot.h>
#include <asm/traps.h>
-#include <asm/debug.h>
#include <asm/emma2rh/emma2rh.h>
diff --git a/arch/mips/include/asm/Kbuild b/arch/mips/include/asm/Kbuild
new file mode 100644
index 00000000000..7897f05e316
--- /dev/null
+++ b/arch/mips/include/asm/Kbuild
@@ -0,0 +1,3 @@
+include include/asm-generic/Kbuild.asm
+
+header-y += cachectl.h sgidefs.h sysmips.h
diff --git a/arch/mips/include/asm/abi.h b/arch/mips/include/asm/abi.h
new file mode 100644
index 00000000000..1dd74fbdc09
--- /dev/null
+++ b/arch/mips/include/asm/abi.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005, 06 by Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2005 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_ABI_H
+#define _ASM_ABI_H
+
+#include <asm/signal.h>
+#include <asm/siginfo.h>
+
+struct mips_abi {
+ int (* const setup_frame)(struct k_sigaction * ka,
+ struct pt_regs *regs, int signr,
+ sigset_t *set);
+ int (* const setup_rt_frame)(struct k_sigaction * ka,
+ struct pt_regs *regs, int signr,
+ sigset_t *set, siginfo_t *info);
+ const unsigned long restart;
+};
+
+#endif /* _ASM_ABI_H */
diff --git a/arch/mips/include/asm/addrspace.h b/arch/mips/include/asm/addrspace.h
new file mode 100644
index 00000000000..569f80aacbd
--- /dev/null
+++ b/arch/mips/include/asm/addrspace.h
@@ -0,0 +1,154 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 99 Ralf Baechle
+ * Copyright (C) 2000, 2002 Maciej W. Rozycki
+ * Copyright (C) 1990, 1999 by Silicon Graphics, Inc.
+ */
+#ifndef _ASM_ADDRSPACE_H
+#define _ASM_ADDRSPACE_H
+
+#include <spaces.h>
+
+/*
+ * Configure language
+ */
+#ifdef __ASSEMBLY__
+#define _ATYPE_
+#define _ATYPE32_
+#define _ATYPE64_
+#define _CONST64_(x) x
+#else
+#define _ATYPE_ __PTRDIFF_TYPE__
+#define _ATYPE32_ int
+#define _ATYPE64_ __s64
+#ifdef CONFIG_64BIT
+#define _CONST64_(x) x ## L
+#else
+#define _CONST64_(x) x ## LL
+#endif
+#endif
+
+/*
+ * 32-bit MIPS address spaces
+ */
+#ifdef __ASSEMBLY__
+#define _ACAST32_
+#define _ACAST64_
+#else
+#define _ACAST32_ (_ATYPE_)(_ATYPE32_) /* widen if necessary */
+#define _ACAST64_ (_ATYPE64_) /* do _not_ narrow */
+#endif
+
+/*
+ * Returns the kernel segment base of a given address
+ */
+#define KSEGX(a) ((_ACAST32_ (a)) & 0xe0000000)
+
+/*
+ * Returns the physical address of a CKSEGx / XKPHYS address
+ */
+#define CPHYSADDR(a) ((_ACAST32_(a)) & 0x1fffffff)
+#define XPHYSADDR(a) ((_ACAST64_(a)) & \
+ _CONST64_(0x000000ffffffffff))
+
+#ifdef CONFIG_64BIT
+
+/*
+ * Memory segments (64bit kernel mode addresses)
+ * The compatibility segments use the full 64-bit sign extended value. Note
+ * the R8000 doesn't have them so don't reference these in generic MIPS code.
+ */
+#define XKUSEG _CONST64_(0x0000000000000000)
+#define XKSSEG _CONST64_(0x4000000000000000)
+#define XKPHYS _CONST64_(0x8000000000000000)
+#define XKSEG _CONST64_(0xc000000000000000)
+#define CKSEG0 _CONST64_(0xffffffff80000000)
+#define CKSEG1 _CONST64_(0xffffffffa0000000)
+#define CKSSEG _CONST64_(0xffffffffc0000000)
+#define CKSEG3 _CONST64_(0xffffffffe0000000)
+
+#define CKSEG0ADDR(a) (CPHYSADDR(a) | CKSEG0)
+#define CKSEG1ADDR(a) (CPHYSADDR(a) | CKSEG1)
+#define CKSEG2ADDR(a) (CPHYSADDR(a) | CKSEG2)
+#define CKSEG3ADDR(a) (CPHYSADDR(a) | CKSEG3)
+
+#else
+
+#define CKSEG0ADDR(a) (CPHYSADDR(a) | KSEG0)
+#define CKSEG1ADDR(a) (CPHYSADDR(a) | KSEG1)
+#define CKSEG2ADDR(a) (CPHYSADDR(a) | KSEG2)
+#define CKSEG3ADDR(a) (CPHYSADDR(a) | KSEG3)
+
+/*
+ * Map an address to a certain kernel segment
+ */
+#define KSEG0ADDR(a) (CPHYSADDR(a) | KSEG0)
+#define KSEG1ADDR(a) (CPHYSADDR(a) | KSEG1)
+#define KSEG2ADDR(a) (CPHYSADDR(a) | KSEG2)
+#define KSEG3ADDR(a) (CPHYSADDR(a) | KSEG3)
+
+/*
+ * Memory segments (32bit kernel mode addresses)
+ * These are the traditional names used in the 32-bit universe.
+ */
+#define KUSEG 0x00000000
+#define KSEG0 0x80000000
+#define KSEG1 0xa0000000
+#define KSEG2 0xc0000000
+#define KSEG3 0xe0000000
+
+#define CKUSEG 0x00000000
+#define CKSEG0 0x80000000
+#define CKSEG1 0xa0000000
+#define CKSEG2 0xc0000000
+#define CKSEG3 0xe0000000
+
+#endif
+
+/*
+ * Cache modes for XKPHYS address conversion macros
+ */
+#define K_CALG_COH_EXCL1_NOL2 0
+#define K_CALG_COH_SHRL1_NOL2 1
+#define K_CALG_UNCACHED 2
+#define K_CALG_NONCOHERENT 3
+#define K_CALG_COH_EXCL 4
+#define K_CALG_COH_SHAREABLE 5
+#define K_CALG_NOTUSED 6
+#define K_CALG_UNCACHED_ACCEL 7
+
+/*
+ * 64-bit address conversions
+ */
+#define PHYS_TO_XKSEG_UNCACHED(p) PHYS_TO_XKPHYS(K_CALG_UNCACHED, (p))
+#define PHYS_TO_XKSEG_CACHED(p) PHYS_TO_XKPHYS(K_CALG_COH_SHAREABLE, (p))
+#define XKPHYS_TO_PHYS(p) ((p) & TO_PHYS_MASK)
+#define PHYS_TO_XKPHYS(cm, a) (_CONST64_(0x8000000000000000) | \
+ (_CONST64_(cm) << 59) | (a))
+
+/*
+ * The ultimate limited of the 64-bit MIPS architecture: 2 bits for selecting
+ * the region, 3 bits for the CCA mode. This leaves 59 bits of which the
+ * R8000 implements most with its 48-bit physical address space.
+ */
+#define TO_PHYS_MASK _CONST64_(0x07ffffffffffffff) /* 2^^59 - 1 */
+
+#ifndef CONFIG_CPU_R8000
+
+/*
+ * The R8000 doesn't have the 32-bit compat spaces so we don't define them
+ * in order to catch bugs in the source code.
+ */
+
+#define COMPAT_K1BASE32 _CONST64_(0xffffffffa0000000)
+#define PHYS_TO_COMPATK1(x) ((x) | COMPAT_K1BASE32) /* 32-bit compat k1 */
+
+#endif
+
+#define KDM_TO_PHYS(x) (_ACAST64_ (x) & TO_PHYS_MASK)
+#define PHYS_TO_K0(x) (_ACAST64_ (x) | CAC_BASE)
+
+#endif /* _ASM_ADDRSPACE_H */
diff --git a/arch/mips/include/asm/asm.h b/arch/mips/include/asm/asm.h
new file mode 100644
index 00000000000..608cfcfbb3e
--- /dev/null
+++ b/arch/mips/include/asm/asm.h
@@ -0,0 +1,409 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1996, 1997, 1999, 2001 by Ralf Baechle
+ * Copyright (C) 1999 by Silicon Graphics, Inc.
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ * Copyright (C) 2002 Maciej W. Rozycki
+ *
+ * Some useful macros for MIPS assembler code
+ *
+ * Some of the routines below contain useless nops that will be optimized
+ * away by gas in -O mode. These nops are however required to fill delay
+ * slots in noreorder mode.
+ */
+#ifndef __ASM_ASM_H
+#define __ASM_ASM_H
+
+#include <asm/sgidefs.h>
+
+#ifndef CAT
+#ifdef __STDC__
+#define __CAT(str1, str2) str1##str2
+#else
+#define __CAT(str1, str2) str1/**/str2
+#endif
+#define CAT(str1, str2) __CAT(str1, str2)
+#endif
+
+/*
+ * PIC specific declarations
+ * Not used for the kernel but here seems to be the right place.
+ */
+#ifdef __PIC__
+#define CPRESTORE(register) \
+ .cprestore register
+#define CPADD(register) \
+ .cpadd register
+#define CPLOAD(register) \
+ .cpload register
+#else
+#define CPRESTORE(register)
+#define CPADD(register)
+#define CPLOAD(register)
+#endif
+
+/*
+ * LEAF - declare leaf routine
+ */
+#define LEAF(symbol) \
+ .globl symbol; \
+ .align 2; \
+ .type symbol, @function; \
+ .ent symbol, 0; \
+symbol: .frame sp, 0, ra
+
+/*
+ * NESTED - declare nested routine entry point
+ */
+#define NESTED(symbol, framesize, rpc) \
+ .globl symbol; \
+ .align 2; \
+ .type symbol, @function; \
+ .ent symbol, 0; \
+symbol: .frame sp, framesize, rpc
+
+/*
+ * END - mark end of function
+ */
+#define END(function) \
+ .end function; \
+ .size function, .-function
+
+/*
+ * EXPORT - export definition of symbol
+ */
+#define EXPORT(symbol) \
+ .globl symbol; \
+symbol:
+
+/*
+ * FEXPORT - export definition of a function symbol
+ */
+#define FEXPORT(symbol) \
+ .globl symbol; \
+ .type symbol, @function; \
+symbol:
+
+/*
+ * ABS - export absolute symbol
+ */
+#define ABS(symbol,value) \
+ .globl symbol; \
+symbol = value
+
+#define PANIC(msg) \
+ .set push; \
+ .set reorder; \
+ PTR_LA a0, 8f; \
+ jal panic; \
+9: b 9b; \
+ .set pop; \
+ TEXT(msg)
+
+/*
+ * Print formatted string
+ */
+#ifdef CONFIG_PRINTK
+#define PRINT(string) \
+ .set push; \
+ .set reorder; \
+ PTR_LA a0, 8f; \
+ jal printk; \
+ .set pop; \
+ TEXT(string)
+#else
+#define PRINT(string)
+#endif
+
+#define TEXT(msg) \
+ .pushsection .data; \
+8: .asciiz msg; \
+ .popsection;
+
+/*
+ * Build text tables
+ */
+#define TTABLE(string) \
+ .pushsection .text; \
+ .word 1f; \
+ .popsection \
+ .pushsection .data; \
+1: .asciiz string; \
+ .popsection
+
+/*
+ * MIPS IV pref instruction.
+ * Use with .set noreorder only!
+ *
+ * MIPS IV implementations are free to treat this as a nop. The R5000
+ * is one of them. So we should have an option not to use this instruction.
+ */
+#ifdef CONFIG_CPU_HAS_PREFETCH
+
+#define PREF(hint,addr) \
+ .set push; \
+ .set mips4; \
+ pref hint, addr; \
+ .set pop
+
+#define PREFX(hint,addr) \
+ .set push; \
+ .set mips4; \
+ prefx hint, addr; \
+ .set pop
+
+#else /* !CONFIG_CPU_HAS_PREFETCH */
+
+#define PREF(hint, addr)
+#define PREFX(hint, addr)
+
+#endif /* !CONFIG_CPU_HAS_PREFETCH */
+
+/*
+ * MIPS ISA IV/V movn/movz instructions and equivalents for older CPUs.
+ */
+#if (_MIPS_ISA == _MIPS_ISA_MIPS1)
+#define MOVN(rd, rs, rt) \
+ .set push; \
+ .set reorder; \
+ beqz rt, 9f; \
+ move rd, rs; \
+ .set pop; \
+9:
+#define MOVZ(rd, rs, rt) \
+ .set push; \
+ .set reorder; \
+ bnez rt, 9f; \
+ move rd, rs; \
+ .set pop; \
+9:
+#endif /* _MIPS_ISA == _MIPS_ISA_MIPS1 */
+#if (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3)
+#define MOVN(rd, rs, rt) \
+ .set push; \
+ .set noreorder; \
+ bnezl rt, 9f; \
+ move rd, rs; \
+ .set pop; \
+9:
+#define MOVZ(rd, rs, rt) \
+ .set push; \
+ .set noreorder; \
+ beqzl rt, 9f; \
+ move rd, rs; \
+ .set pop; \
+9:
+#endif /* (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3) */
+#if (_MIPS_ISA == _MIPS_ISA_MIPS4 ) || (_MIPS_ISA == _MIPS_ISA_MIPS5) || \
+ (_MIPS_ISA == _MIPS_ISA_MIPS32) || (_MIPS_ISA == _MIPS_ISA_MIPS64)
+#define MOVN(rd, rs, rt) \
+ movn rd, rs, rt
+#define MOVZ(rd, rs, rt) \
+ movz rd, rs, rt
+#endif /* MIPS IV, MIPS V, MIPS32 or MIPS64 */
+
+/*
+ * Stack alignment
+ */
+#if (_MIPS_SIM == _MIPS_SIM_ABI32)
+#define ALSZ 7
+#define ALMASK ~7
+#endif
+#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
+#define ALSZ 15
+#define ALMASK ~15
+#endif
+
+/*
+ * Macros to handle different pointer/register sizes for 32/64-bit code
+ */
+
+/*
+ * Size of a register
+ */
+#ifdef __mips64
+#define SZREG 8
+#else
+#define SZREG 4
+#endif
+
+/*
+ * Use the following macros in assemblercode to load/store registers,
+ * pointers etc.
+ */
+#if (_MIPS_SIM == _MIPS_SIM_ABI32)
+#define REG_S sw
+#define REG_L lw
+#define REG_SUBU subu
+#define REG_ADDU addu
+#endif
+#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
+#define REG_S sd
+#define REG_L ld
+#define REG_SUBU dsubu
+#define REG_ADDU daddu
+#endif
+
+/*
+ * How to add/sub/load/store/shift C int variables.
+ */
+#if (_MIPS_SZINT == 32)
+#define INT_ADD add
+#define INT_ADDU addu
+#define INT_ADDI addi
+#define INT_ADDIU addiu
+#define INT_SUB sub
+#define INT_SUBU subu
+#define INT_L lw
+#define INT_S sw
+#define INT_SLL sll
+#define INT_SLLV sllv
+#define INT_SRL srl
+#define INT_SRLV srlv
+#define INT_SRA sra
+#define INT_SRAV srav
+#endif
+
+#if (_MIPS_SZINT == 64)
+#define INT_ADD dadd
+#define INT_ADDU daddu
+#define INT_ADDI daddi
+#define INT_ADDIU daddiu
+#define INT_SUB dsub
+#define INT_SUBU dsubu
+#define INT_L ld
+#define INT_S sd
+#define INT_SLL dsll
+#define INT_SLLV dsllv
+#define INT_SRL dsrl
+#define INT_SRLV dsrlv
+#define INT_SRA dsra
+#define INT_SRAV dsrav
+#endif
+
+/*
+ * How to add/sub/load/store/shift C long variables.
+ */
+#if (_MIPS_SZLONG == 32)
+#define LONG_ADD add
+#define LONG_ADDU addu
+#define LONG_ADDI addi
+#define LONG_ADDIU addiu
+#define LONG_SUB sub
+#define LONG_SUBU subu
+#define LONG_L lw
+#define LONG_S sw
+#define LONG_SLL sll
+#define LONG_SLLV sllv
+#define LONG_SRL srl
+#define LONG_SRLV srlv
+#define LONG_SRA sra
+#define LONG_SRAV srav
+
+#define LONG .word
+#define LONGSIZE 4
+#define LONGMASK 3
+#define LONGLOG 2
+#endif
+
+#if (_MIPS_SZLONG == 64)
+#define LONG_ADD dadd
+#define LONG_ADDU daddu
+#define LONG_ADDI daddi
+#define LONG_ADDIU daddiu
+#define LONG_SUB dsub
+#define LONG_SUBU dsubu
+#define LONG_L ld
+#define LONG_S sd
+#define LONG_SLL dsll
+#define LONG_SLLV dsllv
+#define LONG_SRL dsrl
+#define LONG_SRLV dsrlv
+#define LONG_SRA dsra
+#define LONG_SRAV dsrav
+
+#define LONG .dword
+#define LONGSIZE 8
+#define LONGMASK 7
+#define LONGLOG 3
+#endif
+
+/*
+ * How to add/sub/load/store/shift pointers.
+ */
+#if (_MIPS_SZPTR == 32)
+#define PTR_ADD add
+#define PTR_ADDU addu
+#define PTR_ADDI addi
+#define PTR_ADDIU addiu
+#define PTR_SUB sub
+#define PTR_SUBU subu
+#define PTR_L lw
+#define PTR_S sw
+#define PTR_LA la
+#define PTR_LI li
+#define PTR_SLL sll
+#define PTR_SLLV sllv
+#define PTR_SRL srl
+#define PTR_SRLV srlv
+#define PTR_SRA sra
+#define PTR_SRAV srav
+
+#define PTR_SCALESHIFT 2
+
+#define PTR .word
+#define PTRSIZE 4
+#define PTRLOG 2
+#endif
+
+#if (_MIPS_SZPTR == 64)
+#define PTR_ADD dadd
+#define PTR_ADDU daddu
+#define PTR_ADDI daddi
+#define PTR_ADDIU daddiu
+#define PTR_SUB dsub
+#define PTR_SUBU dsubu
+#define PTR_L ld
+#define PTR_S sd
+#define PTR_LA dla
+#define PTR_LI dli
+#define PTR_SLL dsll
+#define PTR_SLLV dsllv
+#define PTR_SRL dsrl
+#define PTR_SRLV dsrlv
+#define PTR_SRA dsra
+#define PTR_SRAV dsrav
+
+#define PTR_SCALESHIFT 3
+
+#define PTR .dword
+#define PTRSIZE 8
+#define PTRLOG 3
+#endif
+
+/*
+ * Some cp0 registers were extended to 64bit for MIPS III.
+ */
+#if (_MIPS_SIM == _MIPS_SIM_ABI32)
+#define MFC0 mfc0
+#define MTC0 mtc0
+#endif
+#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
+#define MFC0 dmfc0
+#define MTC0 dmtc0
+#endif
+
+#define SSNOP sll zero, zero, 1
+
+#ifdef CONFIG_SGI_IP28
+/* Inhibit speculative stores to volatile (e.g.DMA) or invalid addresses. */
+#include <asm/cacheops.h>
+#define R10KCBARRIER(addr) cache Cache_Barrier, addr;
+#else
+#define R10KCBARRIER(addr)
+#endif
+
+#endif /* __ASM_ASM_H */
diff --git a/arch/mips/include/asm/asmmacro-32.h b/arch/mips/include/asm/asmmacro-32.h
new file mode 100644
index 00000000000..5de3963f511
--- /dev/null
+++ b/arch/mips/include/asm/asmmacro-32.h
@@ -0,0 +1,158 @@
+/*
+ * asmmacro.h: Assembler macros to make things easier to read.
+ *
+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 1998, 1999, 2003 Ralf Baechle
+ */
+#ifndef _ASM_ASMMACRO_32_H
+#define _ASM_ASMMACRO_32_H
+
+#include <asm/asm-offsets.h>
+#include <asm/regdef.h>
+#include <asm/fpregdef.h>
+#include <asm/mipsregs.h>
+
+ .macro fpu_save_double thread status tmp1=t0
+ cfc1 \tmp1, fcr31
+ sdc1 $f0, THREAD_FPR0(\thread)
+ sdc1 $f2, THREAD_FPR2(\thread)
+ sdc1 $f4, THREAD_FPR4(\thread)
+ sdc1 $f6, THREAD_FPR6(\thread)
+ sdc1 $f8, THREAD_FPR8(\thread)
+ sdc1 $f10, THREAD_FPR10(\thread)
+ sdc1 $f12, THREAD_FPR12(\thread)
+ sdc1 $f14, THREAD_FPR14(\thread)
+ sdc1 $f16, THREAD_FPR16(\thread)
+ sdc1 $f18, THREAD_FPR18(\thread)
+ sdc1 $f20, THREAD_FPR20(\thread)
+ sdc1 $f22, THREAD_FPR22(\thread)
+ sdc1 $f24, THREAD_FPR24(\thread)
+ sdc1 $f26, THREAD_FPR26(\thread)
+ sdc1 $f28, THREAD_FPR28(\thread)
+ sdc1 $f30, THREAD_FPR30(\thread)
+ sw \tmp1, THREAD_FCR31(\thread)
+ .endm
+
+ .macro fpu_save_single thread tmp=t0
+ cfc1 \tmp, fcr31
+ swc1 $f0, THREAD_FPR0(\thread)
+ swc1 $f1, THREAD_FPR1(\thread)
+ swc1 $f2, THREAD_FPR2(\thread)
+ swc1 $f3, THREAD_FPR3(\thread)
+ swc1 $f4, THREAD_FPR4(\thread)
+ swc1 $f5, THREAD_FPR5(\thread)
+ swc1 $f6, THREAD_FPR6(\thread)
+ swc1 $f7, THREAD_FPR7(\thread)
+ swc1 $f8, THREAD_FPR8(\thread)
+ swc1 $f9, THREAD_FPR9(\thread)
+ swc1 $f10, THREAD_FPR10(\thread)
+ swc1 $f11, THREAD_FPR11(\thread)
+ swc1 $f12, THREAD_FPR12(\thread)
+ swc1 $f13, THREAD_FPR13(\thread)
+ swc1 $f14, THREAD_FPR14(\thread)
+ swc1 $f15, THREAD_FPR15(\thread)
+ swc1 $f16, THREAD_FPR16(\thread)
+ swc1 $f17, THREAD_FPR17(\thread)
+ swc1 $f18, THREAD_FPR18(\thread)
+ swc1 $f19, THREAD_FPR19(\thread)
+ swc1 $f20, THREAD_FPR20(\thread)
+ swc1 $f21, THREAD_FPR21(\thread)
+ swc1 $f22, THREAD_FPR22(\thread)
+ swc1 $f23, THREAD_FPR23(\thread)
+ swc1 $f24, THREAD_FPR24(\thread)
+ swc1 $f25, THREAD_FPR25(\thread)
+ swc1 $f26, THREAD_FPR26(\thread)
+ swc1 $f27, THREAD_FPR27(\thread)
+ swc1 $f28, THREAD_FPR28(\thread)
+ swc1 $f29, THREAD_FPR29(\thread)
+ swc1 $f30, THREAD_FPR30(\thread)
+ swc1 $f31, THREAD_FPR31(\thread)
+ sw \tmp, THREAD_FCR31(\thread)
+ .endm
+
+ .macro fpu_restore_double thread status tmp=t0
+ lw \tmp, THREAD_FCR31(\thread)
+ ldc1 $f0, THREAD_FPR0(\thread)
+ ldc1 $f2, THREAD_FPR2(\thread)
+ ldc1 $f4, THREAD_FPR4(\thread)
+ ldc1 $f6, THREAD_FPR6(\thread)
+ ldc1 $f8, THREAD_FPR8(\thread)
+ ldc1 $f10, THREAD_FPR10(\thread)
+ ldc1 $f12, THREAD_FPR12(\thread)
+ ldc1 $f14, THREAD_FPR14(\thread)
+ ldc1 $f16, THREAD_FPR16(\thread)
+ ldc1 $f18, THREAD_FPR18(\thread)
+ ldc1 $f20, THREAD_FPR20(\thread)
+ ldc1 $f22, THREAD_FPR22(\thread)
+ ldc1 $f24, THREAD_FPR24(\thread)
+ ldc1 $f26, THREAD_FPR26(\thread)
+ ldc1 $f28, THREAD_FPR28(\thread)
+ ldc1 $f30, THREAD_FPR30(\thread)
+ ctc1 \tmp, fcr31
+ .endm
+
+ .macro fpu_restore_single thread tmp=t0
+ lw \tmp, THREAD_FCR31(\thread)
+ lwc1 $f0, THREAD_FPR0(\thread)
+ lwc1 $f1, THREAD_FPR1(\thread)
+ lwc1 $f2, THREAD_FPR2(\thread)
+ lwc1 $f3, THREAD_FPR3(\thread)
+ lwc1 $f4, THREAD_FPR4(\thread)
+ lwc1 $f5, THREAD_FPR5(\thread)
+ lwc1 $f6, THREAD_FPR6(\thread)
+ lwc1 $f7, THREAD_FPR7(\thread)
+ lwc1 $f8, THREAD_FPR8(\thread)
+ lwc1 $f9, THREAD_FPR9(\thread)
+ lwc1 $f10, THREAD_FPR10(\thread)
+ lwc1 $f11, THREAD_FPR11(\thread)
+ lwc1 $f12, THREAD_FPR12(\thread)
+ lwc1 $f13, THREAD_FPR13(\thread)
+ lwc1 $f14, THREAD_FPR14(\thread)
+ lwc1 $f15, THREAD_FPR15(\thread)
+ lwc1 $f16, THREAD_FPR16(\thread)
+ lwc1 $f17, THREAD_FPR17(\thread)
+ lwc1 $f18, THREAD_FPR18(\thread)
+ lwc1 $f19, THREAD_FPR19(\thread)
+ lwc1 $f20, THREAD_FPR20(\thread)
+ lwc1 $f21, THREAD_FPR21(\thread)
+ lwc1 $f22, THREAD_FPR22(\thread)
+ lwc1 $f23, THREAD_FPR23(\thread)
+ lwc1 $f24, THREAD_FPR24(\thread)
+ lwc1 $f25, THREAD_FPR25(\thread)
+ lwc1 $f26, THREAD_FPR26(\thread)
+ lwc1 $f27, THREAD_FPR27(\thread)
+ lwc1 $f28, THREAD_FPR28(\thread)
+ lwc1 $f29, THREAD_FPR29(\thread)
+ lwc1 $f30, THREAD_FPR30(\thread)
+ lwc1 $f31, THREAD_FPR31(\thread)
+ ctc1 \tmp, fcr31
+ .endm
+
+ .macro cpu_save_nonscratch thread
+ LONG_S s0, THREAD_REG16(\thread)
+ LONG_S s1, THREAD_REG17(\thread)
+ LONG_S s2, THREAD_REG18(\thread)
+ LONG_S s3, THREAD_REG19(\thread)
+ LONG_S s4, THREAD_REG20(\thread)
+ LONG_S s5, THREAD_REG21(\thread)
+ LONG_S s6, THREAD_REG22(\thread)
+ LONG_S s7, THREAD_REG23(\thread)
+ LONG_S sp, THREAD_REG29(\thread)
+ LONG_S fp, THREAD_REG30(\thread)
+ .endm
+
+ .macro cpu_restore_nonscratch thread
+ LONG_L s0, THREAD_REG16(\thread)
+ LONG_L s1, THREAD_REG17(\thread)
+ LONG_L s2, THREAD_REG18(\thread)
+ LONG_L s3, THREAD_REG19(\thread)
+ LONG_L s4, THREAD_REG20(\thread)
+ LONG_L s5, THREAD_REG21(\thread)
+ LONG_L s6, THREAD_REG22(\thread)
+ LONG_L s7, THREAD_REG23(\thread)
+ LONG_L sp, THREAD_REG29(\thread)
+ LONG_L fp, THREAD_REG30(\thread)
+ LONG_L ra, THREAD_REG31(\thread)
+ .endm
+
+#endif /* _ASM_ASMMACRO_32_H */
diff --git a/arch/mips/include/asm/asmmacro-64.h b/arch/mips/include/asm/asmmacro-64.h
new file mode 100644
index 00000000000..225feefcb25
--- /dev/null
+++ b/arch/mips/include/asm/asmmacro-64.h
@@ -0,0 +1,139 @@
+/*
+ * asmmacro.h: Assembler macros to make things easier to read.
+ *
+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 1998, 1999 Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_ASMMACRO_64_H
+#define _ASM_ASMMACRO_64_H
+
+#include <asm/asm-offsets.h>
+#include <asm/regdef.h>
+#include <asm/fpregdef.h>
+#include <asm/mipsregs.h>
+
+ .macro fpu_save_16even thread tmp=t0
+ cfc1 \tmp, fcr31
+ sdc1 $f0, THREAD_FPR0(\thread)
+ sdc1 $f2, THREAD_FPR2(\thread)
+ sdc1 $f4, THREAD_FPR4(\thread)
+ sdc1 $f6, THREAD_FPR6(\thread)
+ sdc1 $f8, THREAD_FPR8(\thread)
+ sdc1 $f10, THREAD_FPR10(\thread)
+ sdc1 $f12, THREAD_FPR12(\thread)
+ sdc1 $f14, THREAD_FPR14(\thread)
+ sdc1 $f16, THREAD_FPR16(\thread)
+ sdc1 $f18, THREAD_FPR18(\thread)
+ sdc1 $f20, THREAD_FPR20(\thread)
+ sdc1 $f22, THREAD_FPR22(\thread)
+ sdc1 $f24, THREAD_FPR24(\thread)
+ sdc1 $f26, THREAD_FPR26(\thread)
+ sdc1 $f28, THREAD_FPR28(\thread)
+ sdc1 $f30, THREAD_FPR30(\thread)
+ sw \tmp, THREAD_FCR31(\thread)
+ .endm
+
+ .macro fpu_save_16odd thread
+ sdc1 $f1, THREAD_FPR1(\thread)
+ sdc1 $f3, THREAD_FPR3(\thread)
+ sdc1 $f5, THREAD_FPR5(\thread)
+ sdc1 $f7, THREAD_FPR7(\thread)
+ sdc1 $f9, THREAD_FPR9(\thread)
+ sdc1 $f11, THREAD_FPR11(\thread)
+ sdc1 $f13, THREAD_FPR13(\thread)
+ sdc1 $f15, THREAD_FPR15(\thread)
+ sdc1 $f17, THREAD_FPR17(\thread)
+ sdc1 $f19, THREAD_FPR19(\thread)
+ sdc1 $f21, THREAD_FPR21(\thread)
+ sdc1 $f23, THREAD_FPR23(\thread)
+ sdc1 $f25, THREAD_FPR25(\thread)
+ sdc1 $f27, THREAD_FPR27(\thread)
+ sdc1 $f29, THREAD_FPR29(\thread)
+ sdc1 $f31, THREAD_FPR31(\thread)
+ .endm
+
+ .macro fpu_save_double thread status tmp
+ sll \tmp, \status, 5
+ bgez \tmp, 2f
+ fpu_save_16odd \thread
+2:
+ fpu_save_16even \thread \tmp
+ .endm
+
+ .macro fpu_restore_16even thread tmp=t0
+ lw \tmp, THREAD_FCR31(\thread)
+ ldc1 $f0, THREAD_FPR0(\thread)
+ ldc1 $f2, THREAD_FPR2(\thread)
+ ldc1 $f4, THREAD_FPR4(\thread)
+ ldc1 $f6, THREAD_FPR6(\thread)
+ ldc1 $f8, THREAD_FPR8(\thread)
+ ldc1 $f10, THREAD_FPR10(\thread)
+ ldc1 $f12, THREAD_FPR12(\thread)
+ ldc1 $f14, THREAD_FPR14(\thread)
+ ldc1 $f16, THREAD_FPR16(\thread)
+ ldc1 $f18, THREAD_FPR18(\thread)
+ ldc1 $f20, THREAD_FPR20(\thread)
+ ldc1 $f22, THREAD_FPR22(\thread)
+ ldc1 $f24, THREAD_FPR24(\thread)
+ ldc1 $f26, THREAD_FPR26(\thread)
+ ldc1 $f28, THREAD_FPR28(\thread)
+ ldc1 $f30, THREAD_FPR30(\thread)
+ ctc1 \tmp, fcr31
+ .endm
+
+ .macro fpu_restore_16odd thread
+ ldc1 $f1, THREAD_FPR1(\thread)
+ ldc1 $f3, THREAD_FPR3(\thread)
+ ldc1 $f5, THREAD_FPR5(\thread)
+ ldc1 $f7, THREAD_FPR7(\thread)
+ ldc1 $f9, THREAD_FPR9(\thread)
+ ldc1 $f11, THREAD_FPR11(\thread)
+ ldc1 $f13, THREAD_FPR13(\thread)
+ ldc1 $f15, THREAD_FPR15(\thread)
+ ldc1 $f17, THREAD_FPR17(\thread)
+ ldc1 $f19, THREAD_FPR19(\thread)
+ ldc1 $f21, THREAD_FPR21(\thread)
+ ldc1 $f23, THREAD_FPR23(\thread)
+ ldc1 $f25, THREAD_FPR25(\thread)
+ ldc1 $f27, THREAD_FPR27(\thread)
+ ldc1 $f29, THREAD_FPR29(\thread)
+ ldc1 $f31, THREAD_FPR31(\thread)
+ .endm
+
+ .macro fpu_restore_double thread status tmp
+ sll \tmp, \status, 5
+ bgez \tmp, 1f # 16 register mode?
+
+ fpu_restore_16odd \thread
+1: fpu_restore_16even \thread \tmp
+ .endm
+
+ .macro cpu_save_nonscratch thread
+ LONG_S s0, THREAD_REG16(\thread)
+ LONG_S s1, THREAD_REG17(\thread)
+ LONG_S s2, THREAD_REG18(\thread)
+ LONG_S s3, THREAD_REG19(\thread)
+ LONG_S s4, THREAD_REG20(\thread)
+ LONG_S s5, THREAD_REG21(\thread)
+ LONG_S s6, THREAD_REG22(\thread)
+ LONG_S s7, THREAD_REG23(\thread)
+ LONG_S sp, THREAD_REG29(\thread)
+ LONG_S fp, THREAD_REG30(\thread)
+ .endm
+
+ .macro cpu_restore_nonscratch thread
+ LONG_L s0, THREAD_REG16(\thread)
+ LONG_L s1, THREAD_REG17(\thread)
+ LONG_L s2, THREAD_REG18(\thread)
+ LONG_L s3, THREAD_REG19(\thread)
+ LONG_L s4, THREAD_REG20(\thread)
+ LONG_L s5, THREAD_REG21(\thread)
+ LONG_L s6, THREAD_REG22(\thread)
+ LONG_L s7, THREAD_REG23(\thread)
+ LONG_L sp, THREAD_REG29(\thread)
+ LONG_L fp, THREAD_REG30(\thread)
+ LONG_L ra, THREAD_REG31(\thread)
+ .endm
+
+#endif /* _ASM_ASMMACRO_64_H */
diff --git a/arch/mips/include/asm/asmmacro.h b/arch/mips/include/asm/asmmacro.h
new file mode 100644
index 00000000000..7a881755800
--- /dev/null
+++ b/arch/mips/include/asm/asmmacro.h
@@ -0,0 +1,82 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Ralf Baechle
+ */
+#ifndef _ASM_ASMMACRO_H
+#define _ASM_ASMMACRO_H
+
+#include <asm/hazards.h>
+
+#ifdef CONFIG_32BIT
+#include <asm/asmmacro-32.h>
+#endif
+#ifdef CONFIG_64BIT
+#include <asm/asmmacro-64.h>
+#endif
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/mipsmtregs.h>
+#endif
+
+#ifdef CONFIG_MIPS_MT_SMTC
+ .macro local_irq_enable reg=t0
+ mfc0 \reg, CP0_TCSTATUS
+ ori \reg, \reg, TCSTATUS_IXMT
+ xori \reg, \reg, TCSTATUS_IXMT
+ mtc0 \reg, CP0_TCSTATUS
+ _ehb
+ .endm
+
+ .macro local_irq_disable reg=t0
+ mfc0 \reg, CP0_TCSTATUS
+ ori \reg, \reg, TCSTATUS_IXMT
+ mtc0 \reg, CP0_TCSTATUS
+ _ehb
+ .endm
+#else
+ .macro local_irq_enable reg=t0
+ mfc0 \reg, CP0_STATUS
+ ori \reg, \reg, 1
+ mtc0 \reg, CP0_STATUS
+ irq_enable_hazard
+ .endm
+
+ .macro local_irq_disable reg=t0
+ mfc0 \reg, CP0_STATUS
+ ori \reg, \reg, 1
+ xori \reg, \reg, 1
+ mtc0 \reg, CP0_STATUS
+ irq_disable_hazard
+ .endm
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+/*
+ * Temporary until all gas have MT ASE support
+ */
+ .macro DMT reg=0
+ .word 0x41600bc1 | (\reg << 16)
+ .endm
+
+ .macro EMT reg=0
+ .word 0x41600be1 | (\reg << 16)
+ .endm
+
+ .macro DVPE reg=0
+ .word 0x41600001 | (\reg << 16)
+ .endm
+
+ .macro EVPE reg=0
+ .word 0x41600021 | (\reg << 16)
+ .endm
+
+ .macro MFTR rt=0, rd=0, u=0, sel=0
+ .word 0x41000000 | (\rt << 16) | (\rd << 11) | (\u << 5) | (\sel)
+ .endm
+
+ .macro MTTR rt=0, rd=0, u=0, sel=0
+ .word 0x41800000 | (\rt << 16) | (\rd << 11) | (\u << 5) | (\sel)
+ .endm
+
+#endif /* _ASM_ASMMACRO_H */
diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h
new file mode 100644
index 00000000000..1232be3885b
--- /dev/null
+++ b/arch/mips/include/asm/atomic.h
@@ -0,0 +1,801 @@
+/*
+ * Atomic operations that C can't guarantee us. Useful for
+ * resource counting etc..
+ *
+ * But use these as seldom as possible since they are much more slower
+ * than regular operations.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 97, 99, 2000, 03, 04, 06 by Ralf Baechle
+ */
+#ifndef _ASM_ATOMIC_H
+#define _ASM_ATOMIC_H
+
+#include <linux/irqflags.h>
+#include <asm/barrier.h>
+#include <asm/cpu-features.h>
+#include <asm/war.h>
+#include <asm/system.h>
+
+typedef struct { volatile int counter; } atomic_t;
+
+#define ATOMIC_INIT(i) { (i) }
+
+/*
+ * atomic_read - read atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically reads the value of @v.
+ */
+#define atomic_read(v) ((v)->counter)
+
+/*
+ * atomic_set - set atomic variable
+ * @v: pointer of type atomic_t
+ * @i: required value
+ *
+ * Atomically sets the value of @v to @i.
+ */
+#define atomic_set(v, i) ((v)->counter = (i))
+
+/*
+ * atomic_add - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v.
+ */
+static __inline__ void atomic_add(int i, atomic_t * v)
+{
+ if (cpu_has_llsc && R10000_LLSC_WAR) {
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: ll %0, %1 # atomic_add \n"
+ " addu %0, %2 \n"
+ " sc %0, %1 \n"
+ " beqzl %0, 1b \n"
+ " .set mips0 \n"
+ : "=&r" (temp), "=m" (v->counter)
+ : "Ir" (i), "m" (v->counter));
+ } else if (cpu_has_llsc) {
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: ll %0, %1 # atomic_add \n"
+ " addu %0, %2 \n"
+ " sc %0, %1 \n"
+ " beqz %0, 2f \n"
+ " .subsection 2 \n"
+ "2: b 1b \n"
+ " .previous \n"
+ " .set mips0 \n"
+ : "=&r" (temp), "=m" (v->counter)
+ : "Ir" (i), "m" (v->counter));
+ } else {
+ unsigned long flags;
+
+ raw_local_irq_save(flags);
+ v->counter += i;
+ raw_local_irq_restore(flags);
+ }
+}
+
+/*
+ * atomic_sub - subtract the atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v.
+ */
+static __inline__ void atomic_sub(int i, atomic_t * v)
+{
+ if (cpu_has_llsc && R10000_LLSC_WAR) {
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: ll %0, %1 # atomic_sub \n"
+ " subu %0, %2 \n"
+ " sc %0, %1 \n"
+ " beqzl %0, 1b \n"
+ " .set mips0 \n"
+ : "=&r" (temp), "=m" (v->counter)
+ : "Ir" (i), "m" (v->counter));
+ } else if (cpu_has_llsc) {
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: ll %0, %1 # atomic_sub \n"
+ " subu %0, %2 \n"
+ " sc %0, %1 \n"
+ " beqz %0, 2f \n"
+ " .subsection 2 \n"
+ "2: b 1b \n"
+ " .previous \n"
+ " .set mips0 \n"
+ : "=&r" (temp), "=m" (v->counter)
+ : "Ir" (i), "m" (v->counter));
+ } else {
+ unsigned long flags;
+
+ raw_local_irq_save(flags);
+ v->counter -= i;
+ raw_local_irq_restore(flags);
+ }
+}
+
+/*
+ * Same as above, but return the result value
+ */
+static __inline__ int atomic_add_return(int i, atomic_t * v)
+{
+ unsigned long result;
+
+ smp_llsc_mb();
+
+ if (cpu_has_llsc && R10000_LLSC_WAR) {
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: ll %1, %2 # atomic_add_return \n"
+ " addu %0, %1, %3 \n"
+ " sc %0, %2 \n"
+ " beqzl %0, 1b \n"
+ " addu %0, %1, %3 \n"
+ " .set mips0 \n"
+ : "=&r" (result), "=&r" (temp), "=m" (v->counter)
+ : "Ir" (i), "m" (v->counter)
+ : "memory");
+ } else if (cpu_has_llsc) {
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: ll %1, %2 # atomic_add_return \n"
+ " addu %0, %1, %3 \n"
+ " sc %0, %2 \n"
+ " beqz %0, 2f \n"
+ " addu %0, %1, %3 \n"
+ " .subsection 2 \n"
+ "2: b 1b \n"
+ " .previous \n"
+ " .set mips0 \n"
+ : "=&r" (result), "=&r" (temp), "=m" (v->counter)
+ : "Ir" (i), "m" (v->counter)
+ : "memory");
+ } else {
+ unsigned long flags;
+
+ raw_local_irq_save(flags);
+ result = v->counter;
+ result += i;
+ v->counter = result;
+ raw_local_irq_restore(flags);
+ }
+
+ smp_llsc_mb();
+
+ return result;
+}
+
+static __inline__ int atomic_sub_return(int i, atomic_t * v)
+{
+ unsigned long result;
+
+ smp_llsc_mb();
+
+ if (cpu_has_llsc && R10000_LLSC_WAR) {
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: ll %1, %2 # atomic_sub_return \n"
+ " subu %0, %1, %3 \n"
+ " sc %0, %2 \n"
+ " beqzl %0, 1b \n"
+ " subu %0, %1, %3 \n"
+ " .set mips0 \n"
+ : "=&r" (result), "=&r" (temp), "=m" (v->counter)
+ : "Ir" (i), "m" (v->counter)
+ : "memory");
+ } else if (cpu_has_llsc) {
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: ll %1, %2 # atomic_sub_return \n"
+ " subu %0, %1, %3 \n"
+ " sc %0, %2 \n"
+ " beqz %0, 2f \n"
+ " subu %0, %1, %3 \n"
+ " .subsection 2 \n"
+ "2: b 1b \n"
+ " .previous \n"
+ " .set mips0 \n"
+ : "=&r" (result), "=&r" (temp), "=m" (v->counter)
+ : "Ir" (i), "m" (v->counter)
+ : "memory");
+ } else {
+ unsigned long flags;
+
+ raw_local_irq_save(flags);
+ result = v->counter;
+ result -= i;
+ v->counter = result;
+ raw_local_irq_restore(flags);
+ }
+
+ smp_llsc_mb();
+
+ return result;
+}
+
+/*
+ * atomic_sub_if_positive - conditionally subtract integer from atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically test @v and subtract @i if @v is greater or equal than @i.
+ * The function returns the old value of @v minus @i.
+ */
+static __inline__ int atomic_sub_if_positive(int i, atomic_t * v)
+{
+ unsigned long result;
+
+ smp_llsc_mb();
+
+ if (cpu_has_llsc && R10000_LLSC_WAR) {
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: ll %1, %2 # atomic_sub_if_positive\n"
+ " subu %0, %1, %3 \n"
+ " bltz %0, 1f \n"
+ " sc %0, %2 \n"
+ " .set noreorder \n"
+ " beqzl %0, 1b \n"
+ " subu %0, %1, %3 \n"
+ " .set reorder \n"
+ "1: \n"
+ " .set mips0 \n"
+ : "=&r" (result), "=&r" (temp), "=m" (v->counter)
+ : "Ir" (i), "m" (v->counter)
+ : "memory");
+ } else if (cpu_has_llsc) {
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: ll %1, %2 # atomic_sub_if_positive\n"
+ " subu %0, %1, %3 \n"
+ " bltz %0, 1f \n"
+ " sc %0, %2 \n"
+ " .set noreorder \n"
+ " beqz %0, 2f \n"
+ " subu %0, %1, %3 \n"
+ " .set reorder \n"
+ " .subsection 2 \n"
+ "2: b 1b \n"
+ " .previous \n"
+ "1: \n"
+ " .set mips0 \n"
+ : "=&r" (result), "=&r" (temp), "=m" (v->counter)
+ : "Ir" (i), "m" (v->counter)
+ : "memory");
+ } else {
+ unsigned long flags;
+
+ raw_local_irq_save(flags);
+ result = v->counter;
+ result -= i;
+ if (result >= 0)
+ v->counter = result;
+ raw_local_irq_restore(flags);
+ }
+
+ smp_llsc_mb();
+
+ return result;
+}
+
+#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n)))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), (new)))
+
+/**
+ * atomic_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
+{
+ int c, old;
+ c = atomic_read(v);
+ for (;;) {
+ if (unlikely(c == (u)))
+ break;
+ old = atomic_cmpxchg((v), c, c + (a));
+ if (likely(old == c))
+ break;
+ c = old;
+ }
+ return c != (u);
+}
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+#define atomic_dec_return(v) atomic_sub_return(1, (v))
+#define atomic_inc_return(v) atomic_add_return(1, (v))
+
+/*
+ * atomic_sub_and_test - subtract value from variable and test result
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0)
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+/*
+ * atomic_dec_and_test - decrement by 1 and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
+
+/*
+ * atomic_dec_if_positive - decrement by 1 if old value positive
+ * @v: pointer of type atomic_t
+ */
+#define atomic_dec_if_positive(v) atomic_sub_if_positive(1, v)
+
+/*
+ * atomic_inc - increment atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1.
+ */
+#define atomic_inc(v) atomic_add(1, (v))
+
+/*
+ * atomic_dec - decrement and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1.
+ */
+#define atomic_dec(v) atomic_sub(1, (v))
+
+/*
+ * atomic_add_negative - add and test if negative
+ * @v: pointer of type atomic_t
+ * @i: integer value to add
+ *
+ * Atomically adds @i to @v and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+#define atomic_add_negative(i, v) (atomic_add_return(i, (v)) < 0)
+
+#ifdef CONFIG_64BIT
+
+typedef struct { volatile long counter; } atomic64_t;
+
+#define ATOMIC64_INIT(i) { (i) }
+
+/*
+ * atomic64_read - read atomic variable
+ * @v: pointer of type atomic64_t
+ *
+ */
+#define atomic64_read(v) ((v)->counter)
+
+/*
+ * atomic64_set - set atomic variable
+ * @v: pointer of type atomic64_t
+ * @i: required value
+ */
+#define atomic64_set(v, i) ((v)->counter = (i))
+
+/*
+ * atomic64_add - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically adds @i to @v.
+ */
+static __inline__ void atomic64_add(long i, atomic64_t * v)
+{
+ if (cpu_has_llsc && R10000_LLSC_WAR) {
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: lld %0, %1 # atomic64_add \n"
+ " addu %0, %2 \n"
+ " scd %0, %1 \n"
+ " beqzl %0, 1b \n"
+ " .set mips0 \n"
+ : "=&r" (temp), "=m" (v->counter)
+ : "Ir" (i), "m" (v->counter));
+ } else if (cpu_has_llsc) {
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: lld %0, %1 # atomic64_add \n"
+ " addu %0, %2 \n"
+ " scd %0, %1 \n"
+ " beqz %0, 2f \n"
+ " .subsection 2 \n"
+ "2: b 1b \n"
+ " .previous \n"
+ " .set mips0 \n"
+ : "=&r" (temp), "=m" (v->counter)
+ : "Ir" (i), "m" (v->counter));
+ } else {
+ unsigned long flags;
+
+ raw_local_irq_save(flags);
+ v->counter += i;
+ raw_local_irq_restore(flags);
+ }
+}
+
+/*
+ * atomic64_sub - subtract the atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically subtracts @i from @v.
+ */
+static __inline__ void atomic64_sub(long i, atomic64_t * v)
+{
+ if (cpu_has_llsc && R10000_LLSC_WAR) {
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: lld %0, %1 # atomic64_sub \n"
+ " subu %0, %2 \n"
+ " scd %0, %1 \n"
+ " beqzl %0, 1b \n"
+ " .set mips0 \n"
+ : "=&r" (temp), "=m" (v->counter)
+ : "Ir" (i), "m" (v->counter));
+ } else if (cpu_has_llsc) {
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: lld %0, %1 # atomic64_sub \n"
+ " subu %0, %2 \n"
+ " scd %0, %1 \n"
+ " beqz %0, 2f \n"
+ " .subsection 2 \n"
+ "2: b 1b \n"
+ " .previous \n"
+ " .set mips0 \n"
+ : "=&r" (temp), "=m" (v->counter)
+ : "Ir" (i), "m" (v->counter));
+ } else {
+ unsigned long flags;
+
+ raw_local_irq_save(flags);
+ v->counter -= i;
+ raw_local_irq_restore(flags);
+ }
+}
+
+/*
+ * Same as above, but return the result value
+ */
+static __inline__ long atomic64_add_return(long i, atomic64_t * v)
+{
+ unsigned long result;
+
+ smp_llsc_mb();
+
+ if (cpu_has_llsc && R10000_LLSC_WAR) {
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: lld %1, %2 # atomic64_add_return \n"
+ " addu %0, %1, %3 \n"
+ " scd %0, %2 \n"
+ " beqzl %0, 1b \n"
+ " addu %0, %1, %3 \n"
+ " .set mips0 \n"
+ : "=&r" (result), "=&r" (temp), "=m" (v->counter)
+ : "Ir" (i), "m" (v->counter)
+ : "memory");
+ } else if (cpu_has_llsc) {
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: lld %1, %2 # atomic64_add_return \n"
+ " addu %0, %1, %3 \n"
+ " scd %0, %2 \n"
+ " beqz %0, 2f \n"
+ " addu %0, %1, %3 \n"
+ " .subsection 2 \n"
+ "2: b 1b \n"
+ " .previous \n"
+ " .set mips0 \n"
+ : "=&r" (result), "=&r" (temp), "=m" (v->counter)
+ : "Ir" (i), "m" (v->counter)
+ : "memory");
+ } else {
+ unsigned long flags;
+
+ raw_local_irq_save(flags);
+ result = v->counter;
+ result += i;
+ v->counter = result;
+ raw_local_irq_restore(flags);
+ }
+
+ smp_llsc_mb();
+
+ return result;
+}
+
+static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
+{
+ unsigned long result;
+
+ smp_llsc_mb();
+
+ if (cpu_has_llsc && R10000_LLSC_WAR) {
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: lld %1, %2 # atomic64_sub_return \n"
+ " subu %0, %1, %3 \n"
+ " scd %0, %2 \n"
+ " beqzl %0, 1b \n"
+ " subu %0, %1, %3 \n"
+ " .set mips0 \n"
+ : "=&r" (result), "=&r" (temp), "=m" (v->counter)
+ : "Ir" (i), "m" (v->counter)
+ : "memory");
+ } else if (cpu_has_llsc) {
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: lld %1, %2 # atomic64_sub_return \n"
+ " subu %0, %1, %3 \n"
+ " scd %0, %2 \n"
+ " beqz %0, 2f \n"
+ " subu %0, %1, %3 \n"
+ " .subsection 2 \n"
+ "2: b 1b \n"
+ " .previous \n"
+ " .set mips0 \n"
+ : "=&r" (result), "=&r" (temp), "=m" (v->counter)
+ : "Ir" (i), "m" (v->counter)
+ : "memory");
+ } else {
+ unsigned long flags;
+
+ raw_local_irq_save(flags);
+ result = v->counter;
+ result -= i;
+ v->counter = result;
+ raw_local_irq_restore(flags);
+ }
+
+ smp_llsc_mb();
+
+ return result;
+}
+
+/*
+ * atomic64_sub_if_positive - conditionally subtract integer from atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically test @v and subtract @i if @v is greater or equal than @i.
+ * The function returns the old value of @v minus @i.
+ */
+static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v)
+{
+ unsigned long result;
+
+ smp_llsc_mb();
+
+ if (cpu_has_llsc && R10000_LLSC_WAR) {
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: lld %1, %2 # atomic64_sub_if_positive\n"
+ " dsubu %0, %1, %3 \n"
+ " bltz %0, 1f \n"
+ " scd %0, %2 \n"
+ " .set noreorder \n"
+ " beqzl %0, 1b \n"
+ " dsubu %0, %1, %3 \n"
+ " .set reorder \n"
+ "1: \n"
+ " .set mips0 \n"
+ : "=&r" (result), "=&r" (temp), "=m" (v->counter)
+ : "Ir" (i), "m" (v->counter)
+ : "memory");
+ } else if (cpu_has_llsc) {
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: lld %1, %2 # atomic64_sub_if_positive\n"
+ " dsubu %0, %1, %3 \n"
+ " bltz %0, 1f \n"
+ " scd %0, %2 \n"
+ " .set noreorder \n"
+ " beqz %0, 2f \n"
+ " dsubu %0, %1, %3 \n"
+ " .set reorder \n"
+ " .subsection 2 \n"
+ "2: b 1b \n"
+ " .previous \n"
+ "1: \n"
+ " .set mips0 \n"
+ : "=&r" (result), "=&r" (temp), "=m" (v->counter)
+ : "Ir" (i), "m" (v->counter)
+ : "memory");
+ } else {
+ unsigned long flags;
+
+ raw_local_irq_save(flags);
+ result = v->counter;
+ result -= i;
+ if (result >= 0)
+ v->counter = result;
+ raw_local_irq_restore(flags);
+ }
+
+ smp_llsc_mb();
+
+ return result;
+}
+
+#define atomic64_cmpxchg(v, o, n) \
+ ((__typeof__((v)->counter))cmpxchg(&((v)->counter), (o), (n)))
+#define atomic64_xchg(v, new) (xchg(&((v)->counter), (new)))
+
+/**
+ * atomic64_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic64_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
+{
+ long c, old;
+ c = atomic64_read(v);
+ for (;;) {
+ if (unlikely(c == (u)))
+ break;
+ old = atomic64_cmpxchg((v), c, c + (a));
+ if (likely(old == c))
+ break;
+ c = old;
+ }
+ return c != (u);
+}
+
+#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
+
+#define atomic64_dec_return(v) atomic64_sub_return(1, (v))
+#define atomic64_inc_return(v) atomic64_add_return(1, (v))
+
+/*
+ * atomic64_sub_and_test - subtract value from variable and test result
+ * @i: integer value to subtract
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically subtracts @i from @v and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic64_sub_and_test(i, v) (atomic64_sub_return((i), (v)) == 0)
+
+/*
+ * atomic64_inc_and_test - increment and test
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0)
+
+/*
+ * atomic64_dec_and_test - decrement by 1 and test
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically decrements @v by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+#define atomic64_dec_and_test(v) (atomic64_sub_return(1, (v)) == 0)
+
+/*
+ * atomic64_dec_if_positive - decrement by 1 if old value positive
+ * @v: pointer of type atomic64_t
+ */
+#define atomic64_dec_if_positive(v) atomic64_sub_if_positive(1, v)
+
+/*
+ * atomic64_inc - increment atomic variable
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically increments @v by 1.
+ */
+#define atomic64_inc(v) atomic64_add(1, (v))
+
+/*
+ * atomic64_dec - decrement and test
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically decrements @v by 1.
+ */
+#define atomic64_dec(v) atomic64_sub(1, (v))
+
+/*
+ * atomic64_add_negative - add and test if negative
+ * @v: pointer of type atomic64_t
+ * @i: integer value to add
+ *
+ * Atomically adds @i to @v and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+#define atomic64_add_negative(i, v) (atomic64_add_return(i, (v)) < 0)
+
+#endif /* CONFIG_64BIT */
+
+/*
+ * atomic*_return operations are serializing but not the non-*_return
+ * versions.
+ */
+#define smp_mb__before_atomic_dec() smp_llsc_mb()
+#define smp_mb__after_atomic_dec() smp_llsc_mb()
+#define smp_mb__before_atomic_inc() smp_llsc_mb()
+#define smp_mb__after_atomic_inc() smp_llsc_mb()
+
+#include <asm-generic/atomic.h>
+
+#endif /* _ASM_ATOMIC_H */
diff --git a/arch/mips/include/asm/auxvec.h b/arch/mips/include/asm/auxvec.h
new file mode 100644
index 00000000000..7cf7f2d2194
--- /dev/null
+++ b/arch/mips/include/asm/auxvec.h
@@ -0,0 +1,4 @@
+#ifndef _ASM_AUXVEC_H
+#define _ASM_AUXVEC_H
+
+#endif /* _ASM_AUXVEC_H */
diff --git a/arch/mips/include/asm/barrier.h b/arch/mips/include/asm/barrier.h
new file mode 100644
index 00000000000..8e9ac313ca3
--- /dev/null
+++ b/arch/mips/include/asm/barrier.h
@@ -0,0 +1,155 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 by Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_BARRIER_H
+#define __ASM_BARRIER_H
+
+/*
+ * read_barrier_depends - Flush all pending reads that subsequents reads
+ * depend on.
+ *
+ * No data-dependent reads from memory-like regions are ever reordered
+ * over this barrier. All reads preceding this primitive are guaranteed
+ * to access memory (but not necessarily other CPUs' caches) before any
+ * reads following this primitive that depend on the data return by
+ * any of the preceding reads. This primitive is much lighter weight than
+ * rmb() on most CPUs, and is never heavier weight than is
+ * rmb().
+ *
+ * These ordering constraints are respected by both the local CPU
+ * and the compiler.
+ *
+ * Ordering is not guaranteed by anything other than these primitives,
+ * not even by data dependencies. See the documentation for
+ * memory_barrier() for examples and URLs to more information.
+ *
+ * For example, the following code would force ordering (the initial
+ * value of "a" is zero, "b" is one, and "p" is "&a"):
+ *
+ * <programlisting>
+ * CPU 0 CPU 1
+ *
+ * b = 2;
+ * memory_barrier();
+ * p = &b; q = p;
+ * read_barrier_depends();
+ * d = *q;
+ * </programlisting>
+ *
+ * because the read of "*q" depends on the read of "p" and these
+ * two reads are separated by a read_barrier_depends(). However,
+ * the following code, with the same initial values for "a" and "b":
+ *
+ * <programlisting>
+ * CPU 0 CPU 1
+ *
+ * a = 2;
+ * memory_barrier();
+ * b = 3; y = b;
+ * read_barrier_depends();
+ * x = a;
+ * </programlisting>
+ *
+ * does not enforce ordering, since there is no data dependency between
+ * the read of "a" and the read of "b". Therefore, on some CPUs, such
+ * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb()
+ * in cases like this where there are no data dependencies.
+ */
+
+#define read_barrier_depends() do { } while(0)
+#define smp_read_barrier_depends() do { } while(0)
+
+#ifdef CONFIG_CPU_HAS_SYNC
+#define __sync() \
+ __asm__ __volatile__( \
+ ".set push\n\t" \
+ ".set noreorder\n\t" \
+ ".set mips2\n\t" \
+ "sync\n\t" \
+ ".set pop" \
+ : /* no output */ \
+ : /* no input */ \
+ : "memory")
+#else
+#define __sync() do { } while(0)
+#endif
+
+#define __fast_iob() \
+ __asm__ __volatile__( \
+ ".set push\n\t" \
+ ".set noreorder\n\t" \
+ "lw $0,%0\n\t" \
+ "nop\n\t" \
+ ".set pop" \
+ : /* no output */ \
+ : "m" (*(int *)CKSEG1) \
+ : "memory")
+
+#define fast_wmb() __sync()
+#define fast_rmb() __sync()
+#define fast_mb() __sync()
+#ifdef CONFIG_SGI_IP28
+#define fast_iob() \
+ __asm__ __volatile__( \
+ ".set push\n\t" \
+ ".set noreorder\n\t" \
+ "lw $0,%0\n\t" \
+ "sync\n\t" \
+ "lw $0,%0\n\t" \
+ ".set pop" \
+ : /* no output */ \
+ : "m" (*(int *)CKSEG1ADDR(0x1fa00004)) \
+ : "memory")
+#else
+#define fast_iob() \
+ do { \
+ __sync(); \
+ __fast_iob(); \
+ } while (0)
+#endif
+
+#ifdef CONFIG_CPU_HAS_WB
+
+#include <asm/wbflush.h>
+
+#define wmb() fast_wmb()
+#define rmb() fast_rmb()
+#define mb() wbflush()
+#define iob() wbflush()
+
+#else /* !CONFIG_CPU_HAS_WB */
+
+#define wmb() fast_wmb()
+#define rmb() fast_rmb()
+#define mb() fast_mb()
+#define iob() fast_iob()
+
+#endif /* !CONFIG_CPU_HAS_WB */
+
+#if defined(CONFIG_WEAK_ORDERING) && defined(CONFIG_SMP)
+#define __WEAK_ORDERING_MB " sync \n"
+#else
+#define __WEAK_ORDERING_MB " \n"
+#endif
+#if defined(CONFIG_WEAK_REORDERING_BEYOND_LLSC) && defined(CONFIG_SMP)
+#define __WEAK_LLSC_MB " sync \n"
+#else
+#define __WEAK_LLSC_MB " \n"
+#endif
+
+#define smp_mb() __asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory")
+#define smp_rmb() __asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory")
+#define smp_wmb() __asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory")
+
+#define set_mb(var, value) \
+ do { var = value; smp_mb(); } while (0)
+
+#define smp_llsc_mb() __asm__ __volatile__(__WEAK_LLSC_MB : : :"memory")
+#define smp_llsc_rmb() __asm__ __volatile__(__WEAK_LLSC_MB : : :"memory")
+#define smp_llsc_wmb() __asm__ __volatile__(__WEAK_LLSC_MB : : :"memory")
+
+#endif /* __ASM_BARRIER_H */
diff --git a/arch/mips/include/asm/bcache.h b/arch/mips/include/asm/bcache.h
new file mode 100644
index 00000000000..0ba9d6ef76a
--- /dev/null
+++ b/arch/mips/include/asm/bcache.h
@@ -0,0 +1,60 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1997, 1999 by Ralf Baechle
+ * Copyright (c) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_BCACHE_H
+#define _ASM_BCACHE_H
+
+
+/* Some R4000 / R4400 / R4600 / R5000 machines may have a non-dma-coherent,
+ chipset implemented caches. On machines with other CPUs the CPU does the
+ cache thing itself. */
+struct bcache_ops {
+ void (*bc_enable)(void);
+ void (*bc_disable)(void);
+ void (*bc_wback_inv)(unsigned long page, unsigned long size);
+ void (*bc_inv)(unsigned long page, unsigned long size);
+};
+
+extern void indy_sc_init(void);
+
+#ifdef CONFIG_BOARD_SCACHE
+
+extern struct bcache_ops *bcops;
+
+static inline void bc_enable(void)
+{
+ bcops->bc_enable();
+}
+
+static inline void bc_disable(void)
+{
+ bcops->bc_disable();
+}
+
+static inline void bc_wback_inv(unsigned long page, unsigned long size)
+{
+ bcops->bc_wback_inv(page, size);
+}
+
+static inline void bc_inv(unsigned long page, unsigned long size)
+{
+ bcops->bc_inv(page, size);
+}
+
+#else /* !defined(CONFIG_BOARD_SCACHE) */
+
+/* Not R4000 / R4400 / R4600 / R5000. */
+
+#define bc_enable() do { } while (0)
+#define bc_disable() do { } while (0)
+#define bc_wback_inv(page, size) do { } while (0)
+#define bc_inv(page, size) do { } while (0)
+
+#endif /* !defined(CONFIG_BOARD_SCACHE) */
+
+#endif /* _ASM_BCACHE_H */
diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h
new file mode 100644
index 00000000000..49df8c4c9d2
--- /dev/null
+++ b/arch/mips/include/asm/bitops.h
@@ -0,0 +1,672 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1994 - 1997, 99, 2000, 06, 07 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (c) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_BITOPS_H
+#define _ASM_BITOPS_H
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <linux/compiler.h>
+#include <linux/irqflags.h>
+#include <linux/types.h>
+#include <asm/barrier.h>
+#include <asm/bug.h>
+#include <asm/byteorder.h> /* sigh ... */
+#include <asm/cpu-features.h>
+#include <asm/sgidefs.h>
+#include <asm/war.h>
+
+#if _MIPS_SZLONG == 32
+#define SZLONG_LOG 5
+#define SZLONG_MASK 31UL
+#define __LL "ll "
+#define __SC "sc "
+#define __INS "ins "
+#define __EXT "ext "
+#elif _MIPS_SZLONG == 64
+#define SZLONG_LOG 6
+#define SZLONG_MASK 63UL
+#define __LL "lld "
+#define __SC "scd "
+#define __INS "dins "
+#define __EXT "dext "
+#endif
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit() smp_llsc_mb()
+#define smp_mb__after_clear_bit() smp_llsc_mb()
+
+/*
+ * set_bit - Atomically set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This function is atomic and may not be reordered. See __set_bit()
+ * if you do not require the atomic guarantees.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
+{
+ unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+ unsigned short bit = nr & SZLONG_MASK;
+ unsigned long temp;
+
+ if (cpu_has_llsc && R10000_LLSC_WAR) {
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: " __LL "%0, %1 # set_bit \n"
+ " or %0, %2 \n"
+ " " __SC "%0, %1 \n"
+ " beqzl %0, 1b \n"
+ " .set mips0 \n"
+ : "=&r" (temp), "=m" (*m)
+ : "ir" (1UL << bit), "m" (*m));
+#ifdef CONFIG_CPU_MIPSR2
+ } else if (__builtin_constant_p(bit)) {
+ __asm__ __volatile__(
+ "1: " __LL "%0, %1 # set_bit \n"
+ " " __INS "%0, %4, %2, 1 \n"
+ " " __SC "%0, %1 \n"
+ " beqz %0, 2f \n"
+ " .subsection 2 \n"
+ "2: b 1b \n"
+ " .previous \n"
+ : "=&r" (temp), "=m" (*m)
+ : "ir" (bit), "m" (*m), "r" (~0));
+#endif /* CONFIG_CPU_MIPSR2 */
+ } else if (cpu_has_llsc) {
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: " __LL "%0, %1 # set_bit \n"
+ " or %0, %2 \n"
+ " " __SC "%0, %1 \n"
+ " beqz %0, 2f \n"
+ " .subsection 2 \n"
+ "2: b 1b \n"
+ " .previous \n"
+ " .set mips0 \n"
+ : "=&r" (temp), "=m" (*m)
+ : "ir" (1UL << bit), "m" (*m));
+ } else {
+ volatile unsigned long *a = addr;
+ unsigned long mask;
+ unsigned long flags;
+
+ a += nr >> SZLONG_LOG;
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ *a |= mask;
+ raw_local_irq_restore(flags);
+ }
+}
+
+/*
+ * clear_bit - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and may not be reordered. However, it does
+ * not contain a memory barrier, so if it is used for locking purposes,
+ * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
+ * in order to ensure changes are visible on other processors.
+ */
+static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+ unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+ unsigned short bit = nr & SZLONG_MASK;
+ unsigned long temp;
+
+ if (cpu_has_llsc && R10000_LLSC_WAR) {
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: " __LL "%0, %1 # clear_bit \n"
+ " and %0, %2 \n"
+ " " __SC "%0, %1 \n"
+ " beqzl %0, 1b \n"
+ " .set mips0 \n"
+ : "=&r" (temp), "=m" (*m)
+ : "ir" (~(1UL << bit)), "m" (*m));
+#ifdef CONFIG_CPU_MIPSR2
+ } else if (__builtin_constant_p(bit)) {
+ __asm__ __volatile__(
+ "1: " __LL "%0, %1 # clear_bit \n"
+ " " __INS "%0, $0, %2, 1 \n"
+ " " __SC "%0, %1 \n"
+ " beqz %0, 2f \n"
+ " .subsection 2 \n"
+ "2: b 1b \n"
+ " .previous \n"
+ : "=&r" (temp), "=m" (*m)
+ : "ir" (bit), "m" (*m));
+#endif /* CONFIG_CPU_MIPSR2 */
+ } else if (cpu_has_llsc) {
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: " __LL "%0, %1 # clear_bit \n"
+ " and %0, %2 \n"
+ " " __SC "%0, %1 \n"
+ " beqz %0, 2f \n"
+ " .subsection 2 \n"
+ "2: b 1b \n"
+ " .previous \n"
+ " .set mips0 \n"
+ : "=&r" (temp), "=m" (*m)
+ : "ir" (~(1UL << bit)), "m" (*m));
+ } else {
+ volatile unsigned long *a = addr;
+ unsigned long mask;
+ unsigned long flags;
+
+ a += nr >> SZLONG_LOG;
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ *a &= ~mask;
+ raw_local_irq_restore(flags);
+ }
+}
+
+/*
+ * clear_bit_unlock - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and implies release semantics before the memory
+ * operation. It can be used for an unlock.
+ */
+static inline void clear_bit_unlock(unsigned long nr, volatile unsigned long *addr)
+{
+ smp_mb__before_clear_bit();
+ clear_bit(nr, addr);
+}
+
+/*
+ * change_bit - Toggle a bit in memory
+ * @nr: Bit to change
+ * @addr: Address to start counting from
+ *
+ * change_bit() is atomic and may not be reordered.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+ unsigned short bit = nr & SZLONG_MASK;
+
+ if (cpu_has_llsc && R10000_LLSC_WAR) {
+ unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: " __LL "%0, %1 # change_bit \n"
+ " xor %0, %2 \n"
+ " " __SC "%0, %1 \n"
+ " beqzl %0, 1b \n"
+ " .set mips0 \n"
+ : "=&r" (temp), "=m" (*m)
+ : "ir" (1UL << bit), "m" (*m));
+ } else if (cpu_has_llsc) {
+ unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: " __LL "%0, %1 # change_bit \n"
+ " xor %0, %2 \n"
+ " " __SC "%0, %1 \n"
+ " beqz %0, 2f \n"
+ " .subsection 2 \n"
+ "2: b 1b \n"
+ " .previous \n"
+ " .set mips0 \n"
+ : "=&r" (temp), "=m" (*m)
+ : "ir" (1UL << bit), "m" (*m));
+ } else {
+ volatile unsigned long *a = addr;
+ unsigned long mask;
+ unsigned long flags;
+
+ a += nr >> SZLONG_LOG;
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ *a ^= mask;
+ raw_local_irq_restore(flags);
+ }
+}
+
+/*
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_set_bit(unsigned long nr,
+ volatile unsigned long *addr)
+{
+ unsigned short bit = nr & SZLONG_MASK;
+ unsigned long res;
+
+ smp_llsc_mb();
+
+ if (cpu_has_llsc && R10000_LLSC_WAR) {
+ unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: " __LL "%0, %1 # test_and_set_bit \n"
+ " or %2, %0, %3 \n"
+ " " __SC "%2, %1 \n"
+ " beqzl %2, 1b \n"
+ " and %2, %0, %3 \n"
+ " .set mips0 \n"
+ : "=&r" (temp), "=m" (*m), "=&r" (res)
+ : "r" (1UL << bit), "m" (*m)
+ : "memory");
+ } else if (cpu_has_llsc) {
+ unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " .set mips3 \n"
+ "1: " __LL "%0, %1 # test_and_set_bit \n"
+ " or %2, %0, %3 \n"
+ " " __SC "%2, %1 \n"
+ " beqz %2, 2f \n"
+ " and %2, %0, %3 \n"
+ " .subsection 2 \n"
+ "2: b 1b \n"
+ " nop \n"
+ " .previous \n"
+ " .set pop \n"
+ : "=&r" (temp), "=m" (*m), "=&r" (res)
+ : "r" (1UL << bit), "m" (*m)
+ : "memory");
+ } else {
+ volatile unsigned long *a = addr;
+ unsigned long mask;
+ unsigned long flags;
+
+ a += nr >> SZLONG_LOG;
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ res = (mask & *a);
+ *a |= mask;
+ raw_local_irq_restore(flags);
+ }
+
+ smp_llsc_mb();
+
+ return res != 0;
+}
+
+/*
+ * test_and_set_bit_lock - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and implies acquire ordering semantics
+ * after the memory operation.
+ */
+static inline int test_and_set_bit_lock(unsigned long nr,
+ volatile unsigned long *addr)
+{
+ unsigned short bit = nr & SZLONG_MASK;
+ unsigned long res;
+
+ if (cpu_has_llsc && R10000_LLSC_WAR) {
+ unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: " __LL "%0, %1 # test_and_set_bit \n"
+ " or %2, %0, %3 \n"
+ " " __SC "%2, %1 \n"
+ " beqzl %2, 1b \n"
+ " and %2, %0, %3 \n"
+ " .set mips0 \n"
+ : "=&r" (temp), "=m" (*m), "=&r" (res)
+ : "r" (1UL << bit), "m" (*m)
+ : "memory");
+ } else if (cpu_has_llsc) {
+ unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " .set mips3 \n"
+ "1: " __LL "%0, %1 # test_and_set_bit \n"
+ " or %2, %0, %3 \n"
+ " " __SC "%2, %1 \n"
+ " beqz %2, 2f \n"
+ " and %2, %0, %3 \n"
+ " .subsection 2 \n"
+ "2: b 1b \n"
+ " nop \n"
+ " .previous \n"
+ " .set pop \n"
+ : "=&r" (temp), "=m" (*m), "=&r" (res)
+ : "r" (1UL << bit), "m" (*m)
+ : "memory");
+ } else {
+ volatile unsigned long *a = addr;
+ unsigned long mask;
+ unsigned long flags;
+
+ a += nr >> SZLONG_LOG;
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ res = (mask & *a);
+ *a |= mask;
+ raw_local_irq_restore(flags);
+ }
+
+ smp_llsc_mb();
+
+ return res != 0;
+}
+/*
+ * test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_clear_bit(unsigned long nr,
+ volatile unsigned long *addr)
+{
+ unsigned short bit = nr & SZLONG_MASK;
+ unsigned long res;
+
+ smp_llsc_mb();
+
+ if (cpu_has_llsc && R10000_LLSC_WAR) {
+ unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: " __LL "%0, %1 # test_and_clear_bit \n"
+ " or %2, %0, %3 \n"
+ " xor %2, %3 \n"
+ " " __SC "%2, %1 \n"
+ " beqzl %2, 1b \n"
+ " and %2, %0, %3 \n"
+ " .set mips0 \n"
+ : "=&r" (temp), "=m" (*m), "=&r" (res)
+ : "r" (1UL << bit), "m" (*m)
+ : "memory");
+#ifdef CONFIG_CPU_MIPSR2
+ } else if (__builtin_constant_p(nr)) {
+ unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ "1: " __LL "%0, %1 # test_and_clear_bit \n"
+ " " __EXT "%2, %0, %3, 1 \n"
+ " " __INS "%0, $0, %3, 1 \n"
+ " " __SC "%0, %1 \n"
+ " beqz %0, 2f \n"
+ " .subsection 2 \n"
+ "2: b 1b \n"
+ " .previous \n"
+ : "=&r" (temp), "=m" (*m), "=&r" (res)
+ : "ir" (bit), "m" (*m)
+ : "memory");
+#endif
+ } else if (cpu_has_llsc) {
+ unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " .set mips3 \n"
+ "1: " __LL "%0, %1 # test_and_clear_bit \n"
+ " or %2, %0, %3 \n"
+ " xor %2, %3 \n"
+ " " __SC "%2, %1 \n"
+ " beqz %2, 2f \n"
+ " and %2, %0, %3 \n"
+ " .subsection 2 \n"
+ "2: b 1b \n"
+ " nop \n"
+ " .previous \n"
+ " .set pop \n"
+ : "=&r" (temp), "=m" (*m), "=&r" (res)
+ : "r" (1UL << bit), "m" (*m)
+ : "memory");
+ } else {
+ volatile unsigned long *a = addr;
+ unsigned long mask;
+ unsigned long flags;
+
+ a += nr >> SZLONG_LOG;
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ res = (mask & *a);
+ *a &= ~mask;
+ raw_local_irq_restore(flags);
+ }
+
+ smp_llsc_mb();
+
+ return res != 0;
+}
+
+/*
+ * test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to change
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_change_bit(unsigned long nr,
+ volatile unsigned long *addr)
+{
+ unsigned short bit = nr & SZLONG_MASK;
+ unsigned long res;
+
+ smp_llsc_mb();
+
+ if (cpu_has_llsc && R10000_LLSC_WAR) {
+ unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: " __LL "%0, %1 # test_and_change_bit \n"
+ " xor %2, %0, %3 \n"
+ " " __SC "%2, %1 \n"
+ " beqzl %2, 1b \n"
+ " and %2, %0, %3 \n"
+ " .set mips0 \n"
+ : "=&r" (temp), "=m" (*m), "=&r" (res)
+ : "r" (1UL << bit), "m" (*m)
+ : "memory");
+ } else if (cpu_has_llsc) {
+ unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " .set mips3 \n"
+ "1: " __LL "%0, %1 # test_and_change_bit \n"
+ " xor %2, %0, %3 \n"
+ " " __SC "\t%2, %1 \n"
+ " beqz %2, 2f \n"
+ " and %2, %0, %3 \n"
+ " .subsection 2 \n"
+ "2: b 1b \n"
+ " nop \n"
+ " .previous \n"
+ " .set pop \n"
+ : "=&r" (temp), "=m" (*m), "=&r" (res)
+ : "r" (1UL << bit), "m" (*m)
+ : "memory");
+ } else {
+ volatile unsigned long *a = addr;
+ unsigned long mask;
+ unsigned long flags;
+
+ a += nr >> SZLONG_LOG;
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ res = (mask & *a);
+ *a ^= mask;
+ raw_local_irq_restore(flags);
+ }
+
+ smp_llsc_mb();
+
+ return res != 0;
+}
+
+#include <asm-generic/bitops/non-atomic.h>
+
+/*
+ * __clear_bit_unlock - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * __clear_bit() is non-atomic and implies release semantics before the memory
+ * operation. It can be used for an unlock if no other CPUs can concurrently
+ * modify other bits in the word.
+ */
+static inline void __clear_bit_unlock(unsigned long nr, volatile unsigned long *addr)
+{
+ smp_mb();
+ __clear_bit(nr, addr);
+}
+
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+
+/*
+ * Return the bit position (0..63) of the most significant 1 bit in a word
+ * Returns -1 if no 1 bit exists
+ */
+static inline unsigned long __fls(unsigned long x)
+{
+ int lz;
+
+ if (sizeof(x) == 4) {
+ __asm__(
+ " .set push \n"
+ " .set mips32 \n"
+ " clz %0, %1 \n"
+ " .set pop \n"
+ : "=r" (lz)
+ : "r" (x));
+
+ return 31 - lz;
+ }
+
+ BUG_ON(sizeof(x) != 8);
+
+ __asm__(
+ " .set push \n"
+ " .set mips64 \n"
+ " dclz %0, %1 \n"
+ " .set pop \n"
+ : "=r" (lz)
+ : "r" (x));
+
+ return 63 - lz;
+}
+
+/*
+ * __ffs - find first bit in word.
+ * @word: The word to search
+ *
+ * Returns 0..SZLONG-1
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static inline unsigned long __ffs(unsigned long word)
+{
+ return __fls(word & -word);
+}
+
+/*
+ * fls - find last bit set.
+ * @word: The word to search
+ *
+ * This is defined the same way as ffs.
+ * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
+ */
+static inline int fls(int word)
+{
+ __asm__("clz %0, %1" : "=r" (word) : "r" (word));
+
+ return 32 - word;
+}
+
+#if defined(CONFIG_64BIT) && defined(CONFIG_CPU_MIPS64)
+static inline int fls64(__u64 word)
+{
+ __asm__("dclz %0, %1" : "=r" (word) : "r" (word));
+
+ return 64 - word;
+}
+#else
+#include <asm-generic/bitops/fls64.h>
+#endif
+
+/*
+ * ffs - find first bit set.
+ * @word: The word to search
+ *
+ * This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+static inline int ffs(int word)
+{
+ if (!word)
+ return 0;
+
+ return fls(word & -word);
+}
+
+#else
+
+#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/__fls.h>
+#include <asm-generic/bitops/ffs.h>
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/fls64.h>
+
+#endif /*defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) */
+
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/find.h>
+
+#ifdef __KERNEL__
+
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/ext2-non-atomic.h>
+#include <asm-generic/bitops/ext2-atomic.h>
+#include <asm-generic/bitops/minix.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_BITOPS_H */
diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h
new file mode 100644
index 00000000000..610fe3af7a0
--- /dev/null
+++ b/arch/mips/include/asm/bootinfo.h
@@ -0,0 +1,110 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1996, 2003 by Ralf Baechle
+ * Copyright (C) 1995, 1996 Andreas Busse
+ * Copyright (C) 1995, 1996 Stoned Elipot
+ * Copyright (C) 1995, 1996 Paul M. Antoine.
+ */
+#ifndef _ASM_BOOTINFO_H
+#define _ASM_BOOTINFO_H
+
+#include <linux/types.h>
+#include <asm/setup.h>
+
+/*
+ * The MACH_ IDs are sort of equivalent to PCI product IDs. As such the
+ * numbers do not necessarily reflect technical relations or similarities
+ * between systems.
+ */
+
+/*
+ * Valid machtype values for group unknown
+ */
+#define MACH_UNKNOWN 0 /* whatever... */
+
+/*
+ * Valid machtype for group DEC
+ */
+#define MACH_DSUNKNOWN 0
+#define MACH_DS23100 1 /* DECstation 2100 or 3100 */
+#define MACH_DS5100 2 /* DECsystem 5100 */
+#define MACH_DS5000_200 3 /* DECstation 5000/200 */
+#define MACH_DS5000_1XX 4 /* DECstation 5000/120, 125, 133, 150 */
+#define MACH_DS5000_XX 5 /* DECstation 5000/20, 25, 33, 50 */
+#define MACH_DS5000_2X0 6 /* DECstation 5000/240, 260 */
+#define MACH_DS5400 7 /* DECsystem 5400 */
+#define MACH_DS5500 8 /* DECsystem 5500 */
+#define MACH_DS5800 9 /* DECsystem 5800 */
+#define MACH_DS5900 10 /* DECsystem 5900 */
+
+/*
+ * Valid machtype for group PMC-MSP
+ */
+#define MACH_MSP4200_EVAL 0 /* PMC-Sierra MSP4200 Evaluation */
+#define MACH_MSP4200_GW 1 /* PMC-Sierra MSP4200 Gateway demo */
+#define MACH_MSP4200_FPGA 2 /* PMC-Sierra MSP4200 Emulation */
+#define MACH_MSP7120_EVAL 3 /* PMC-Sierra MSP7120 Evaluation */
+#define MACH_MSP7120_GW 4 /* PMC-Sierra MSP7120 Residential GW */
+#define MACH_MSP7120_FPGA 5 /* PMC-Sierra MSP7120 Emulation */
+#define MACH_MSP_OTHER 255 /* PMC-Sierra unknown board type */
+
+/*
+ * Valid machtype for group Mikrotik
+ */
+#define MACH_MIKROTIK_RB532 0 /* Mikrotik RouterBoard 532 */
+#define MACH_MIKROTIK_RB532A 1 /* Mikrotik RouterBoard 532A */
+
+#define CL_SIZE COMMAND_LINE_SIZE
+
+extern char *system_type;
+const char *get_system_type(void);
+
+extern unsigned long mips_machtype;
+
+#define BOOT_MEM_MAP_MAX 32
+#define BOOT_MEM_RAM 1
+#define BOOT_MEM_ROM_DATA 2
+#define BOOT_MEM_RESERVED 3
+
+/*
+ * A memory map that's built upon what was determined
+ * or specified on the command line.
+ */
+struct boot_mem_map {
+ int nr_map;
+ struct boot_mem_map_entry {
+ phys_t addr; /* start of memory segment */
+ phys_t size; /* size of memory segment */
+ long type; /* type of memory segment */
+ } map[BOOT_MEM_MAP_MAX];
+};
+
+extern struct boot_mem_map boot_mem_map;
+
+extern void add_memory_region(phys_t start, phys_t size, long type);
+
+extern void prom_init(void);
+extern void prom_free_prom_memory(void);
+
+extern void free_init_pages(const char *what,
+ unsigned long begin, unsigned long end);
+
+/*
+ * Initial kernel command line, usually setup by prom_init()
+ */
+extern char arcs_cmdline[CL_SIZE];
+
+/*
+ * Registers a0, a1, a3 and a4 as passed to the kernel entry by firmware
+ */
+extern unsigned long fw_arg0, fw_arg1, fw_arg2, fw_arg3;
+
+/*
+ * Platform memory detection hook called by setup_arch
+ */
+extern void plat_mem_setup(void);
+
+#endif /* _ASM_BOOTINFO_H */
diff --git a/arch/mips/include/asm/branch.h b/arch/mips/include/asm/branch.h
new file mode 100644
index 00000000000..37c6857c8d4
--- /dev/null
+++ b/arch/mips/include/asm/branch.h
@@ -0,0 +1,38 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1997, 1998, 2001 by Ralf Baechle
+ */
+#ifndef _ASM_BRANCH_H
+#define _ASM_BRANCH_H
+
+#include <asm/ptrace.h>
+
+static inline int delay_slot(struct pt_regs *regs)
+{
+ return regs->cp0_cause & CAUSEF_BD;
+}
+
+static inline unsigned long exception_epc(struct pt_regs *regs)
+{
+ if (!delay_slot(regs))
+ return regs->cp0_epc;
+
+ return regs->cp0_epc + 4;
+}
+
+extern int __compute_return_epc(struct pt_regs *regs);
+
+static inline int compute_return_epc(struct pt_regs *regs)
+{
+ if (!delay_slot(regs)) {
+ regs->cp0_epc += 4;
+ return 0;
+ }
+
+ return __compute_return_epc(regs);
+}
+
+#endif /* _ASM_BRANCH_H */
diff --git a/arch/mips/include/asm/break.h b/arch/mips/include/asm/break.h
new file mode 100644
index 00000000000..25b980c91e7
--- /dev/null
+++ b/arch/mips/include/asm/break.h
@@ -0,0 +1,34 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 2003 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef __ASM_BREAK_H
+#define __ASM_BREAK_H
+
+/*
+ * The following break codes are or were in use for specific purposes in
+ * other MIPS operating systems. Linux/MIPS doesn't use all of them. The
+ * unused ones are here as placeholders; we might encounter them in
+ * non-Linux/MIPS object files or make use of them in the future.
+ */
+#define BRK_USERBP 0 /* User bp (used by debuggers) */
+#define BRK_KERNELBP 1 /* Break in the kernel */
+#define BRK_ABORT 2 /* Sometimes used by abort(3) to SIGIOT */
+#define BRK_BD_TAKEN 3 /* For bd slot emulation - not implemented */
+#define BRK_BD_NOTTAKEN 4 /* For bd slot emulation - not implemented */
+#define BRK_SSTEPBP 5 /* User bp (used by debuggers) */
+#define BRK_OVERFLOW 6 /* Overflow check */
+#define BRK_DIVZERO 7 /* Divide by zero check */
+#define BRK_RANGE 8 /* Range error check */
+#define BRK_STACKOVERFLOW 9 /* For Ada stackchecking */
+#define BRK_NORLD 10 /* No rld found - not used by Linux/MIPS */
+#define _BRK_THREADBP 11 /* For threads, user bp (used by debuggers) */
+#define BRK_BUG 512 /* Used by BUG() */
+#define BRK_KDB 513 /* Used in KDB_ENTER() */
+#define BRK_MULOVF 1023 /* Multiply overflow */
+
+#endif /* __ASM_BREAK_H */
diff --git a/arch/mips/include/asm/bug.h b/arch/mips/include/asm/bug.h
new file mode 100644
index 00000000000..7eb63de808b
--- /dev/null
+++ b/arch/mips/include/asm/bug.h
@@ -0,0 +1,33 @@
+#ifndef __ASM_BUG_H
+#define __ASM_BUG_H
+
+#include <asm/sgidefs.h>
+
+#ifdef CONFIG_BUG
+
+#include <asm/break.h>
+
+#define BUG() \
+do { \
+ __asm__ __volatile__("break %0" : : "i" (BRK_BUG)); \
+} while (0)
+
+#define HAVE_ARCH_BUG
+
+#if (_MIPS_ISA > _MIPS_ISA_MIPS1)
+
+#define BUG_ON(condition) \
+do { \
+ __asm__ __volatile__("tne $0, %0, %1" \
+ : : "r" (condition), "i" (BRK_BUG)); \
+} while (0)
+
+#define HAVE_ARCH_BUG_ON
+
+#endif /* _MIPS_ISA > _MIPS_ISA_MIPS1 */
+
+#endif
+
+#include <asm-generic/bug.h>
+
+#endif /* __ASM_BUG_H */
diff --git a/arch/mips/include/asm/bugs.h b/arch/mips/include/asm/bugs.h
new file mode 100644
index 00000000000..9dc10df3207
--- /dev/null
+++ b/arch/mips/include/asm/bugs.h
@@ -0,0 +1,53 @@
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Copyright (C) 2007 Maciej W. Rozycki
+ *
+ * Needs:
+ * void check_bugs(void);
+ */
+#ifndef _ASM_BUGS_H
+#define _ASM_BUGS_H
+
+#include <linux/bug.h>
+#include <linux/delay.h>
+
+#include <asm/cpu.h>
+#include <asm/cpu-info.h>
+
+extern int daddiu_bug;
+
+extern void check_bugs64_early(void);
+
+extern void check_bugs32(void);
+extern void check_bugs64(void);
+
+static inline void check_bugs_early(void)
+{
+#ifdef CONFIG_64BIT
+ check_bugs64_early();
+#endif
+}
+
+static inline void check_bugs(void)
+{
+ unsigned int cpu = smp_processor_id();
+
+ cpu_data[cpu].udelay_val = loops_per_jiffy;
+ check_bugs32();
+#ifdef CONFIG_64BIT
+ check_bugs64();
+#endif
+}
+
+static inline int r4k_daddiu_bug(void)
+{
+#ifdef CONFIG_64BIT
+ WARN_ON(daddiu_bug < 0);
+ return daddiu_bug != 0;
+#else
+ return 0;
+#endif
+}
+
+#endif /* _ASM_BUGS_H */
diff --git a/arch/mips/include/asm/byteorder.h b/arch/mips/include/asm/byteorder.h
new file mode 100644
index 00000000000..fe7dc2d59b6
--- /dev/null
+++ b/arch/mips/include/asm/byteorder.h
@@ -0,0 +1,76 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 99, 2003 by Ralf Baechle
+ */
+#ifndef _ASM_BYTEORDER_H
+#define _ASM_BYTEORDER_H
+
+#include <linux/compiler.h>
+#include <asm/types.h>
+
+#ifdef __GNUC__
+
+#ifdef CONFIG_CPU_MIPSR2
+
+static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 x)
+{
+ __asm__(
+ " wsbh %0, %1 \n"
+ : "=r" (x)
+ : "r" (x));
+
+ return x;
+}
+#define __arch__swab16(x) ___arch__swab16(x)
+
+static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x)
+{
+ __asm__(
+ " wsbh %0, %1 \n"
+ " rotr %0, %0, 16 \n"
+ : "=r" (x)
+ : "r" (x));
+
+ return x;
+}
+#define __arch__swab32(x) ___arch__swab32(x)
+
+#ifdef CONFIG_CPU_MIPS64_R2
+
+static __inline__ __attribute_const__ __u64 ___arch__swab64(__u64 x)
+{
+ __asm__(
+ " dsbh %0, %1 \n"
+ " dshd %0, %0 \n"
+ " drotr %0, %0, 32 \n"
+ : "=r" (x)
+ : "r" (x));
+
+ return x;
+}
+
+#define __arch__swab64(x) ___arch__swab64(x)
+
+#endif /* CONFIG_CPU_MIPS64_R2 */
+
+#endif /* CONFIG_CPU_MIPSR2 */
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+# define __BYTEORDER_HAS_U64__
+# define __SWAB_64_THRU_32__
+#endif
+
+#endif /* __GNUC__ */
+
+#if defined(__MIPSEB__)
+# include <linux/byteorder/big_endian.h>
+#elif defined(__MIPSEL__)
+# include <linux/byteorder/little_endian.h>
+#else
+# error "MIPS, but neither __MIPSEB__, nor __MIPSEL__???"
+#endif
+
+#endif /* _ASM_BYTEORDER_H */
diff --git a/arch/mips/include/asm/cache.h b/arch/mips/include/asm/cache.h
new file mode 100644
index 00000000000..37f175c42bb
--- /dev/null
+++ b/arch/mips/include/asm/cache.h
@@ -0,0 +1,20 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997, 98, 99, 2000, 2003 Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_CACHE_H
+#define _ASM_CACHE_H
+
+#include <kmalloc.h>
+
+#define L1_CACHE_SHIFT CONFIG_MIPS_L1_CACHE_SHIFT
+#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
+
+#define SMP_CACHE_SHIFT L1_CACHE_SHIFT
+#define SMP_CACHE_BYTES L1_CACHE_BYTES
+
+#endif /* _ASM_CACHE_H */
diff --git a/arch/mips/include/asm/cachectl.h b/arch/mips/include/asm/cachectl.h
new file mode 100644
index 00000000000..f3ce721861d
--- /dev/null
+++ b/arch/mips/include/asm/cachectl.h
@@ -0,0 +1,26 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995, 1996 by Ralf Baechle
+ */
+#ifndef _ASM_CACHECTL
+#define _ASM_CACHECTL
+
+/*
+ * Options for cacheflush system call
+ */
+#define ICACHE (1<<0) /* flush instruction cache */
+#define DCACHE (1<<1) /* writeback and flush data cache */
+#define BCACHE (ICACHE|DCACHE) /* flush both caches */
+
+/*
+ * Caching modes for the cachectl(2) call
+ *
+ * cachectl(2) is currently not supported and returns ENOSYS.
+ */
+#define CACHEABLE 0 /* make pages cacheable */
+#define UNCACHEABLE 1 /* make pages uncacheable */
+
+#endif /* _ASM_CACHECTL */
diff --git a/arch/mips/include/asm/cacheflush.h b/arch/mips/include/asm/cacheflush.h
new file mode 100644
index 00000000000..03b1d69b142
--- /dev/null
+++ b/arch/mips/include/asm/cacheflush.h
@@ -0,0 +1,116 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 01, 02, 03 by Ralf Baechle
+ * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_CACHEFLUSH_H
+#define _ASM_CACHEFLUSH_H
+
+/* Keep includes the same across arches. */
+#include <linux/mm.h>
+#include <asm/cpu-features.h>
+
+/* Cache flushing:
+ *
+ * - flush_cache_all() flushes entire cache
+ * - flush_cache_mm(mm) flushes the specified mm context's cache lines
+ * - flush_cache_dup mm(mm) handles cache flushing when forking
+ * - flush_cache_page(mm, vmaddr, pfn) flushes a single page
+ * - flush_cache_range(vma, start, end) flushes a range of pages
+ * - flush_icache_range(start, end) flush a range of instructions
+ * - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
+ *
+ * MIPS specific flush operations:
+ *
+ * - flush_cache_sigtramp() flush signal trampoline
+ * - flush_icache_all() flush the entire instruction cache
+ * - flush_data_cache_page() flushes a page from the data cache
+ */
+extern void (*flush_cache_all)(void);
+extern void (*__flush_cache_all)(void);
+extern void (*flush_cache_mm)(struct mm_struct *mm);
+#define flush_cache_dup_mm(mm) do { (void) (mm); } while (0)
+extern void (*flush_cache_range)(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end);
+extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
+extern void __flush_dcache_page(struct page *page);
+
+static inline void flush_dcache_page(struct page *page)
+{
+ if (cpu_has_dc_aliases || !cpu_has_ic_fills_f_dc)
+ __flush_dcache_page(page);
+
+}
+
+#define flush_dcache_mmap_lock(mapping) do { } while (0)
+#define flush_dcache_mmap_unlock(mapping) do { } while (0)
+
+#define ARCH_HAS_FLUSH_ANON_PAGE
+extern void __flush_anon_page(struct page *, unsigned long);
+static inline void flush_anon_page(struct vm_area_struct *vma,
+ struct page *page, unsigned long vmaddr)
+{
+ if (cpu_has_dc_aliases && PageAnon(page))
+ __flush_anon_page(page, vmaddr);
+}
+
+static inline void flush_icache_page(struct vm_area_struct *vma,
+ struct page *page)
+{
+}
+
+extern void (*flush_icache_range)(unsigned long start, unsigned long end);
+extern void (*local_flush_icache_range)(unsigned long start, unsigned long end);
+
+extern void (*__flush_cache_vmap)(void);
+
+static inline void flush_cache_vmap(unsigned long start, unsigned long end)
+{
+ if (cpu_has_dc_aliases)
+ __flush_cache_vmap();
+}
+
+extern void (*__flush_cache_vunmap)(void);
+
+static inline void flush_cache_vunmap(unsigned long start, unsigned long end)
+{
+ if (cpu_has_dc_aliases)
+ __flush_cache_vunmap();
+}
+
+extern void copy_to_user_page(struct vm_area_struct *vma,
+ struct page *page, unsigned long vaddr, void *dst, const void *src,
+ unsigned long len);
+
+extern void copy_from_user_page(struct vm_area_struct *vma,
+ struct page *page, unsigned long vaddr, void *dst, const void *src,
+ unsigned long len);
+
+extern void (*flush_cache_sigtramp)(unsigned long addr);
+extern void (*flush_icache_all)(void);
+extern void (*local_flush_data_cache_page)(void * addr);
+extern void (*flush_data_cache_page)(unsigned long addr);
+
+/*
+ * This flag is used to indicate that the page pointed to by a pte
+ * is dirty and requires cleaning before returning it to the user.
+ */
+#define PG_dcache_dirty PG_arch_1
+
+#define Page_dcache_dirty(page) \
+ test_bit(PG_dcache_dirty, &(page)->flags)
+#define SetPageDcacheDirty(page) \
+ set_bit(PG_dcache_dirty, &(page)->flags)
+#define ClearPageDcacheDirty(page) \
+ clear_bit(PG_dcache_dirty, &(page)->flags)
+
+/* Run kernel code uncached, useful for cache probing functions. */
+unsigned long run_uncached(void *func);
+
+extern void *kmap_coherent(struct page *page, unsigned long addr);
+extern void kunmap_coherent(void);
+
+#endif /* _ASM_CACHEFLUSH_H */
diff --git a/arch/mips/include/asm/cacheops.h b/arch/mips/include/asm/cacheops.h
new file mode 100644
index 00000000000..256ad2cc6eb
--- /dev/null
+++ b/arch/mips/include/asm/cacheops.h
@@ -0,0 +1,85 @@
+/*
+ * Cache operations for the cache instruction.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * (C) Copyright 1996, 97, 99, 2002, 03 Ralf Baechle
+ * (C) Copyright 1999 Silicon Graphics, Inc.
+ */
+#ifndef __ASM_CACHEOPS_H
+#define __ASM_CACHEOPS_H
+
+/*
+ * Cache Operations available on all MIPS processors with R4000-style caches
+ */
+#define Index_Invalidate_I 0x00
+#define Index_Writeback_Inv_D 0x01
+#define Index_Load_Tag_I 0x04
+#define Index_Load_Tag_D 0x05
+#define Index_Store_Tag_I 0x08
+#define Index_Store_Tag_D 0x09
+#if defined(CONFIG_CPU_LOONGSON2)
+#define Hit_Invalidate_I 0x00
+#else
+#define Hit_Invalidate_I 0x10
+#endif
+#define Hit_Invalidate_D 0x11
+#define Hit_Writeback_Inv_D 0x15
+
+/*
+ * R4000-specific cacheops
+ */
+#define Create_Dirty_Excl_D 0x0d
+#define Fill 0x14
+#define Hit_Writeback_I 0x18
+#define Hit_Writeback_D 0x19
+
+/*
+ * R4000SC and R4400SC-specific cacheops
+ */
+#define Index_Invalidate_SI 0x02
+#define Index_Writeback_Inv_SD 0x03
+#define Index_Load_Tag_SI 0x06
+#define Index_Load_Tag_SD 0x07
+#define Index_Store_Tag_SI 0x0A
+#define Index_Store_Tag_SD 0x0B
+#define Create_Dirty_Excl_SD 0x0f
+#define Hit_Invalidate_SI 0x12
+#define Hit_Invalidate_SD 0x13
+#define Hit_Writeback_Inv_SD 0x17
+#define Hit_Writeback_SD 0x1b
+#define Hit_Set_Virtual_SI 0x1e
+#define Hit_Set_Virtual_SD 0x1f
+
+/*
+ * R5000-specific cacheops
+ */
+#define R5K_Page_Invalidate_S 0x17
+
+/*
+ * RM7000-specific cacheops
+ */
+#define Page_Invalidate_T 0x16
+
+/*
+ * R10000-specific cacheops
+ *
+ * Cacheops 0x02, 0x06, 0x0a, 0x0c-0x0e, 0x16, 0x1a and 0x1e are unused.
+ * Most of the _S cacheops are identical to the R4000SC _SD cacheops.
+ */
+#define Index_Writeback_Inv_S 0x03
+#define Index_Load_Tag_S 0x07
+#define Index_Store_Tag_S 0x0B
+#define Hit_Invalidate_S 0x13
+#define Cache_Barrier 0x14
+#define Hit_Writeback_Inv_S 0x17
+#define Index_Load_Data_I 0x18
+#define Index_Load_Data_D 0x19
+#define Index_Load_Data_S 0x1b
+#define Index_Store_Data_I 0x1c
+#define Index_Store_Data_D 0x1d
+#define Index_Store_Data_S 0x1f
+
+#endif /* __ASM_CACHEOPS_H */
diff --git a/arch/mips/include/asm/cevt-r4k.h b/arch/mips/include/asm/cevt-r4k.h
new file mode 100644
index 00000000000..fa4328f9124
--- /dev/null
+++ b/arch/mips/include/asm/cevt-r4k.h
@@ -0,0 +1,46 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Kevin D. Kissell
+ */
+
+/*
+ * Definitions used for common event timer implementation
+ * for MIPS 4K-type processors and their MIPS MT variants.
+ * Avoids unsightly extern declarations in C files.
+ */
+#ifndef __ASM_CEVT_R4K_H
+#define __ASM_CEVT_R4K_H
+
+DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device);
+
+void mips_event_handler(struct clock_event_device *dev);
+int c0_compare_int_usable(void);
+void mips_set_clock_mode(enum clock_event_mode, struct clock_event_device *);
+irqreturn_t c0_compare_interrupt(int, void *);
+
+extern struct irqaction c0_compare_irqaction;
+extern int cp0_timer_irq_installed;
+
+/*
+ * Possibly handle a performance counter interrupt.
+ * Return true if the timer interrupt should not be checked
+ */
+
+static inline int handle_perf_irq(int r2)
+{
+ /*
+ * The performance counter overflow interrupt may be shared with the
+ * timer interrupt (cp0_perfcount_irq < 0). If it is and a
+ * performance counter has overflowed (perf_irq() == IRQ_HANDLED)
+ * and we can't reliably determine if a counter interrupt has also
+ * happened (!r2) then don't check for a timer interrupt.
+ */
+ return (cp0_perfcount_irq < 0) &&
+ perf_irq() == IRQ_HANDLED &&
+ !r2;
+}
+
+#endif /* __ASM_CEVT_R4K_H */
diff --git a/arch/mips/include/asm/checksum.h b/arch/mips/include/asm/checksum.h
new file mode 100644
index 00000000000..290485ac540
--- /dev/null
+++ b/arch/mips/include/asm/checksum.h
@@ -0,0 +1,260 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 96, 97, 98, 99, 2001 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) 2001 Thiemo Seufer.
+ * Copyright (C) 2002 Maciej W. Rozycki
+ */
+#ifndef _ASM_CHECKSUM_H
+#define _ASM_CHECKSUM_H
+
+#include <linux/in6.h>
+
+#include <asm/uaccess.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum);
+
+__wsum __csum_partial_copy_user(const void *src, void *dst,
+ int len, __wsum sum, int *err_ptr);
+
+/*
+ * this is a new version of the above that records errors it finds in *errp,
+ * but continues and zeros the rest of the buffer.
+ */
+static inline
+__wsum csum_partial_copy_from_user(const void __user *src, void *dst, int len,
+ __wsum sum, int *err_ptr)
+{
+ might_sleep();
+ return __csum_partial_copy_user((__force void *)src, dst,
+ len, sum, err_ptr);
+}
+
+/*
+ * Copy and checksum to user
+ */
+#define HAVE_CSUM_COPY_USER
+static inline
+__wsum csum_and_copy_to_user(const void *src, void __user *dst, int len,
+ __wsum sum, int *err_ptr)
+{
+ might_sleep();
+ if (access_ok(VERIFY_WRITE, dst, len))
+ return __csum_partial_copy_user(src, (__force void *)dst,
+ len, sum, err_ptr);
+ if (len)
+ *err_ptr = -EFAULT;
+
+ return (__force __wsum)-1; /* invalid checksum */
+}
+
+/*
+ * the same as csum_partial, but copies from user space (but on MIPS
+ * we have just one address space, so this is identical to the above)
+ */
+__wsum csum_partial_copy_nocheck(const void *src, void *dst,
+ int len, __wsum sum);
+
+/*
+ * Fold a partial checksum without adding pseudo headers
+ */
+static inline __sum16 csum_fold(__wsum sum)
+{
+ __asm__(
+ " .set push # csum_fold\n"
+ " .set noat \n"
+ " sll $1, %0, 16 \n"
+ " addu %0, $1 \n"
+ " sltu $1, %0, $1 \n"
+ " srl %0, %0, 16 \n"
+ " addu %0, $1 \n"
+ " xori %0, 0xffff \n"
+ " .set pop"
+ : "=r" (sum)
+ : "0" (sum));
+
+ return (__force __sum16)sum;
+}
+
+/*
+ * This is a version of ip_compute_csum() optimized for IP headers,
+ * which always checksum on 4 octet boundaries.
+ *
+ * By Jorge Cwik <jorge@laser.satlink.net>, adapted for linux by
+ * Arnt Gulbrandsen.
+ */
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+ const unsigned int *word = iph;
+ const unsigned int *stop = word + ihl;
+ unsigned int csum;
+ int carry;
+
+ csum = word[0];
+ csum += word[1];
+ carry = (csum < word[1]);
+ csum += carry;
+
+ csum += word[2];
+ carry = (csum < word[2]);
+ csum += carry;
+
+ csum += word[3];
+ carry = (csum < word[3]);
+ csum += carry;
+
+ word += 4;
+ do {
+ csum += *word;
+ carry = (csum < *word);
+ csum += carry;
+ word++;
+ } while (word != stop);
+
+ return csum_fold(csum);
+}
+
+static inline __wsum csum_tcpudp_nofold(__be32 saddr,
+ __be32 daddr, unsigned short len, unsigned short proto,
+ __wsum sum)
+{
+ __asm__(
+ " .set push # csum_tcpudp_nofold\n"
+ " .set noat \n"
+#ifdef CONFIG_32BIT
+ " addu %0, %2 \n"
+ " sltu $1, %0, %2 \n"
+ " addu %0, $1 \n"
+
+ " addu %0, %3 \n"
+ " sltu $1, %0, %3 \n"
+ " addu %0, $1 \n"
+
+ " addu %0, %4 \n"
+ " sltu $1, %0, %4 \n"
+ " addu %0, $1 \n"
+#endif
+#ifdef CONFIG_64BIT
+ " daddu %0, %2 \n"
+ " daddu %0, %3 \n"
+ " daddu %0, %4 \n"
+ " dsll32 $1, %0, 0 \n"
+ " daddu %0, $1 \n"
+ " dsra32 %0, %0, 0 \n"
+#endif
+ " .set pop"
+ : "=r" (sum)
+ : "0" ((__force unsigned long)daddr),
+ "r" ((__force unsigned long)saddr),
+#ifdef __MIPSEL__
+ "r" ((proto + len) << 8),
+#else
+ "r" (proto + len),
+#endif
+ "r" ((__force unsigned long)sum));
+
+ return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+ unsigned short len,
+ unsigned short proto,
+ __wsum sum)
+{
+ return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+ return csum_fold(csum_partial(buff, len, 0));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+ const struct in6_addr *daddr,
+ __u32 len, unsigned short proto,
+ __wsum sum)
+{
+ __asm__(
+ " .set push # csum_ipv6_magic\n"
+ " .set noreorder \n"
+ " .set noat \n"
+ " addu %0, %5 # proto (long in network byte order)\n"
+ " sltu $1, %0, %5 \n"
+ " addu %0, $1 \n"
+
+ " addu %0, %6 # csum\n"
+ " sltu $1, %0, %6 \n"
+ " lw %1, 0(%2) # four words source address\n"
+ " addu %0, $1 \n"
+ " addu %0, %1 \n"
+ " sltu $1, %0, %1 \n"
+
+ " lw %1, 4(%2) \n"
+ " addu %0, $1 \n"
+ " addu %0, %1 \n"
+ " sltu $1, %0, %1 \n"
+
+ " lw %1, 8(%2) \n"
+ " addu %0, $1 \n"
+ " addu %0, %1 \n"
+ " sltu $1, %0, %1 \n"
+
+ " lw %1, 12(%2) \n"
+ " addu %0, $1 \n"
+ " addu %0, %1 \n"
+ " sltu $1, %0, %1 \n"
+
+ " lw %1, 0(%3) \n"
+ " addu %0, $1 \n"
+ " addu %0, %1 \n"
+ " sltu $1, %0, %1 \n"
+
+ " lw %1, 4(%3) \n"
+ " addu %0, $1 \n"
+ " addu %0, %1 \n"
+ " sltu $1, %0, %1 \n"
+
+ " lw %1, 8(%3) \n"
+ " addu %0, $1 \n"
+ " addu %0, %1 \n"
+ " sltu $1, %0, %1 \n"
+
+ " lw %1, 12(%3) \n"
+ " addu %0, $1 \n"
+ " addu %0, %1 \n"
+ " sltu $1, %0, %1 \n"
+
+ " addu %0, $1 # Add final carry\n"
+ " .set pop"
+ : "=r" (sum), "=r" (proto)
+ : "r" (saddr), "r" (daddr),
+ "0" (htonl(len)), "1" (htonl(proto)), "r" (sum));
+
+ return csum_fold(sum);
+}
+
+#endif /* _ASM_CHECKSUM_H */
diff --git a/arch/mips/include/asm/cmp.h b/arch/mips/include/asm/cmp.h
new file mode 100644
index 00000000000..89a73fb93ae
--- /dev/null
+++ b/arch/mips/include/asm/cmp.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_CMP_H
+#define _ASM_CMP_H
+
+/*
+ * Definitions for CMP multitasking on MIPS cores
+ */
+struct task_struct;
+
+extern void cmp_smp_setup(void);
+extern void cmp_smp_finish(void);
+extern void cmp_boot_secondary(int cpu, struct task_struct *t);
+extern void cmp_init_secondary(void);
+extern void cmp_cpus_done(void);
+extern void cmp_prepare_cpus(unsigned int max_cpus);
+
+/* This is platform specific */
+extern void cmp_send_ipi(int cpu, unsigned int action);
+#endif /* _ASM_CMP_H */
diff --git a/arch/mips/include/asm/cmpxchg.h b/arch/mips/include/asm/cmpxchg.h
new file mode 100644
index 00000000000..4a812c3ceb9
--- /dev/null
+++ b/arch/mips/include/asm/cmpxchg.h
@@ -0,0 +1,124 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 06, 07 by Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_CMPXCHG_H
+#define __ASM_CMPXCHG_H
+
+#include <linux/irqflags.h>
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+#define __cmpxchg_asm(ld, st, m, old, new) \
+({ \
+ __typeof(*(m)) __ret; \
+ \
+ if (cpu_has_llsc && R10000_LLSC_WAR) { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " .set mips3 \n" \
+ "1: " ld " %0, %2 # __cmpxchg_asm \n" \
+ " bne %0, %z3, 2f \n" \
+ " .set mips0 \n" \
+ " move $1, %z4 \n" \
+ " .set mips3 \n" \
+ " " st " $1, %1 \n" \
+ " beqzl $1, 1b \n" \
+ "2: \n" \
+ " .set pop \n" \
+ : "=&r" (__ret), "=R" (*m) \
+ : "R" (*m), "Jr" (old), "Jr" (new) \
+ : "memory"); \
+ } else if (cpu_has_llsc) { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " .set mips3 \n" \
+ "1: " ld " %0, %2 # __cmpxchg_asm \n" \
+ " bne %0, %z3, 2f \n" \
+ " .set mips0 \n" \
+ " move $1, %z4 \n" \
+ " .set mips3 \n" \
+ " " st " $1, %1 \n" \
+ " beqz $1, 3f \n" \
+ "2: \n" \
+ " .subsection 2 \n" \
+ "3: b 1b \n" \
+ " .previous \n" \
+ " .set pop \n" \
+ : "=&r" (__ret), "=R" (*m) \
+ : "R" (*m), "Jr" (old), "Jr" (new) \
+ : "memory"); \
+ } else { \
+ unsigned long __flags; \
+ \
+ raw_local_irq_save(__flags); \
+ __ret = *m; \
+ if (__ret == old) \
+ *m = new; \
+ raw_local_irq_restore(__flags); \
+ } \
+ \
+ __ret; \
+})
+
+/*
+ * This function doesn't exist, so you'll get a linker error
+ * if something tries to do an invalid cmpxchg().
+ */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+#define __cmpxchg(ptr, old, new, barrier) \
+({ \
+ __typeof__(ptr) __ptr = (ptr); \
+ __typeof__(*(ptr)) __old = (old); \
+ __typeof__(*(ptr)) __new = (new); \
+ __typeof__(*(ptr)) __res = 0; \
+ \
+ barrier; \
+ \
+ switch (sizeof(*(__ptr))) { \
+ case 4: \
+ __res = __cmpxchg_asm("ll", "sc", __ptr, __old, __new); \
+ break; \
+ case 8: \
+ if (sizeof(long) == 8) { \
+ __res = __cmpxchg_asm("lld", "scd", __ptr, \
+ __old, __new); \
+ break; \
+ } \
+ default: \
+ __cmpxchg_called_with_bad_pointer(); \
+ break; \
+ } \
+ \
+ barrier; \
+ \
+ __res; \
+})
+
+#define cmpxchg(ptr, old, new) __cmpxchg(ptr, old, new, smp_llsc_mb())
+#define cmpxchg_local(ptr, old, new) __cmpxchg(ptr, old, new, )
+
+#define cmpxchg64(ptr, o, n) \
+ ({ \
+ BUILD_BUG_ON(sizeof(*(ptr)) != 8); \
+ cmpxchg((ptr), (o), (n)); \
+ })
+
+#ifdef CONFIG_64BIT
+#define cmpxchg64_local(ptr, o, n) \
+ ({ \
+ BUILD_BUG_ON(sizeof(*(ptr)) != 8); \
+ cmpxchg_local((ptr), (o), (n)); \
+ })
+#else
+#include <asm-generic/cmpxchg-local.h>
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+#endif
+
+#endif /* __ASM_CMPXCHG_H */
diff --git a/arch/mips/include/asm/compat-signal.h b/arch/mips/include/asm/compat-signal.h
new file mode 100644
index 00000000000..368a99e5c3e
--- /dev/null
+++ b/arch/mips/include/asm/compat-signal.h
@@ -0,0 +1,119 @@
+#ifndef __ASM_COMPAT_SIGNAL_H
+#define __ASM_COMPAT_SIGNAL_H
+
+#include <linux/bug.h>
+#include <linux/compat.h>
+#include <linux/compiler.h>
+
+#include <asm/signal.h>
+#include <asm/siginfo.h>
+
+#include <asm/uaccess.h>
+
+#define SI_PAD_SIZE32 ((SI_MAX_SIZE/sizeof(int)) - 3)
+
+typedef struct compat_siginfo {
+ int si_signo;
+ int si_code;
+ int si_errno;
+
+ union {
+ int _pad[SI_PAD_SIZE32];
+
+ /* kill() */
+ struct {
+ compat_pid_t _pid; /* sender's pid */
+ compat_uid_t _uid; /* sender's uid */
+ } _kill;
+
+ /* SIGCHLD */
+ struct {
+ compat_pid_t _pid; /* which child */
+ compat_uid_t _uid; /* sender's uid */
+ int _status; /* exit code */
+ compat_clock_t _utime;
+ compat_clock_t _stime;
+ } _sigchld;
+
+ /* IRIX SIGCHLD */
+ struct {
+ compat_pid_t _pid; /* which child */
+ compat_clock_t _utime;
+ int _status; /* exit code */
+ compat_clock_t _stime;
+ } _irix_sigchld;
+
+ /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+ struct {
+ s32 _addr; /* faulting insn/memory ref. */
+ } _sigfault;
+
+ /* SIGPOLL, SIGXFSZ (To do ...) */
+ struct {
+ int _band; /* POLL_IN, POLL_OUT, POLL_MSG */
+ int _fd;
+ } _sigpoll;
+
+ /* POSIX.1b timers */
+ struct {
+ timer_t _tid; /* timer id */
+ int _overrun; /* overrun count */
+ compat_sigval_t _sigval;/* same as below */
+ int _sys_private; /* not to be passed to user */
+ } _timer;
+
+ /* POSIX.1b signals */
+ struct {
+ compat_pid_t _pid; /* sender's pid */
+ compat_uid_t _uid; /* sender's uid */
+ compat_sigval_t _sigval;
+ } _rt;
+
+ } _sifields;
+} compat_siginfo_t;
+
+static inline int __copy_conv_sigset_to_user(compat_sigset_t __user *d,
+ const sigset_t *s)
+{
+ int err;
+
+ BUG_ON(sizeof(*d) != sizeof(*s));
+ BUG_ON(_NSIG_WORDS != 2);
+
+ err = __put_user(s->sig[0], &d->sig[0]);
+ err |= __put_user(s->sig[0] >> 32, &d->sig[1]);
+ err |= __put_user(s->sig[1], &d->sig[2]);
+ err |= __put_user(s->sig[1] >> 32, &d->sig[3]);
+
+ return err;
+}
+
+static inline int __copy_conv_sigset_from_user(sigset_t *d,
+ const compat_sigset_t __user *s)
+{
+ int err;
+ union sigset_u {
+ sigset_t s;
+ compat_sigset_t c;
+ } *u = (union sigset_u *) d;
+
+ BUG_ON(sizeof(*d) != sizeof(*s));
+ BUG_ON(_NSIG_WORDS != 2);
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+ err = __get_user(u->c.sig[1], &s->sig[0]);
+ err |= __get_user(u->c.sig[0], &s->sig[1]);
+ err |= __get_user(u->c.sig[3], &s->sig[2]);
+ err |= __get_user(u->c.sig[2], &s->sig[3]);
+#endif
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+ err = __get_user(u->c.sig[0], &s->sig[0]);
+ err |= __get_user(u->c.sig[1], &s->sig[1]);
+ err |= __get_user(u->c.sig[2], &s->sig[2]);
+ err |= __get_user(u->c.sig[3], &s->sig[3]);
+#endif
+
+ return err;
+}
+
+#endif /* __ASM_COMPAT_SIGNAL_H */
diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h
new file mode 100644
index 00000000000..ac5d541368e
--- /dev/null
+++ b/arch/mips/include/asm/compat.h
@@ -0,0 +1,221 @@
+#ifndef _ASM_COMPAT_H
+#define _ASM_COMPAT_H
+/*
+ * Architecture specific compatibility types
+ */
+#include <linux/types.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+
+#define COMPAT_USER_HZ 100
+
+typedef u32 compat_size_t;
+typedef s32 compat_ssize_t;
+typedef s32 compat_time_t;
+typedef s32 compat_clock_t;
+typedef s32 compat_suseconds_t;
+
+typedef s32 compat_pid_t;
+typedef s32 __compat_uid_t;
+typedef s32 __compat_gid_t;
+typedef __compat_uid_t __compat_uid32_t;
+typedef __compat_gid_t __compat_gid32_t;
+typedef u32 compat_mode_t;
+typedef u32 compat_ino_t;
+typedef u32 compat_dev_t;
+typedef s32 compat_off_t;
+typedef s64 compat_loff_t;
+typedef u32 compat_nlink_t;
+typedef s32 compat_ipc_pid_t;
+typedef s32 compat_daddr_t;
+typedef s32 compat_caddr_t;
+typedef struct {
+ s32 val[2];
+} compat_fsid_t;
+typedef s32 compat_timer_t;
+typedef s32 compat_key_t;
+
+typedef s32 compat_int_t;
+typedef s32 compat_long_t;
+typedef s64 compat_s64;
+typedef u32 compat_uint_t;
+typedef u32 compat_ulong_t;
+typedef u64 compat_u64;
+
+struct compat_timespec {
+ compat_time_t tv_sec;
+ s32 tv_nsec;
+};
+
+struct compat_timeval {
+ compat_time_t tv_sec;
+ s32 tv_usec;
+};
+
+struct compat_stat {
+ compat_dev_t st_dev;
+ s32 st_pad1[3];
+ compat_ino_t st_ino;
+ compat_mode_t st_mode;
+ compat_nlink_t st_nlink;
+ __compat_uid_t st_uid;
+ __compat_gid_t st_gid;
+ compat_dev_t st_rdev;
+ s32 st_pad2[2];
+ compat_off_t st_size;
+ s32 st_pad3;
+ compat_time_t st_atime;
+ s32 st_atime_nsec;
+ compat_time_t st_mtime;
+ s32 st_mtime_nsec;
+ compat_time_t st_ctime;
+ s32 st_ctime_nsec;
+ s32 st_blksize;
+ s32 st_blocks;
+ s32 st_pad4[14];
+};
+
+struct compat_flock {
+ short l_type;
+ short l_whence;
+ compat_off_t l_start;
+ compat_off_t l_len;
+ s32 l_sysid;
+ compat_pid_t l_pid;
+ short __unused;
+ s32 pad[4];
+};
+
+#define F_GETLK64 33
+#define F_SETLK64 34
+#define F_SETLKW64 35
+
+struct compat_flock64 {
+ short l_type;
+ short l_whence;
+ compat_loff_t l_start;
+ compat_loff_t l_len;
+ compat_pid_t l_pid;
+};
+
+struct compat_statfs {
+ int f_type;
+ int f_bsize;
+ int f_frsize;
+ int f_blocks;
+ int f_bfree;
+ int f_files;
+ int f_ffree;
+ int f_bavail;
+ compat_fsid_t f_fsid;
+ int f_namelen;
+ int f_spare[6];
+};
+
+#define COMPAT_RLIM_INFINITY 0x7fffffffUL
+
+typedef u32 compat_old_sigset_t; /* at least 32 bits */
+
+#define _COMPAT_NSIG 128 /* Don't ask !$@#% ... */
+#define _COMPAT_NSIG_BPW 32
+
+typedef u32 compat_sigset_word;
+
+#define COMPAT_OFF_T_MAX 0x7fffffff
+#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL
+
+/*
+ * A pointer passed in from user mode. This should not
+ * be used for syscall parameters, just declare them
+ * as pointers because the syscall entry code will have
+ * appropriately converted them already.
+ */
+typedef u32 compat_uptr_t;
+
+static inline void __user *compat_ptr(compat_uptr_t uptr)
+{
+ /* cast to a __user pointer via "unsigned long" makes sparse happy */
+ return (void __user *)(unsigned long)(long)uptr;
+}
+
+static inline compat_uptr_t ptr_to_compat(void __user *uptr)
+{
+ return (u32)(unsigned long)uptr;
+}
+
+static inline void __user *compat_alloc_user_space(long len)
+{
+ struct pt_regs *regs = (struct pt_regs *)
+ ((unsigned long) current_thread_info() + THREAD_SIZE - 32) - 1;
+
+ return (void __user *) (regs->regs[29] - len);
+}
+
+struct compat_ipc64_perm {
+ compat_key_t key;
+ __compat_uid32_t uid;
+ __compat_gid32_t gid;
+ __compat_uid32_t cuid;
+ __compat_gid32_t cgid;
+ compat_mode_t mode;
+ unsigned short seq;
+ unsigned short __pad2;
+ compat_ulong_t __unused1;
+ compat_ulong_t __unused2;
+};
+
+struct compat_semid64_ds {
+ struct compat_ipc64_perm sem_perm;
+ compat_time_t sem_otime;
+ compat_time_t sem_ctime;
+ compat_ulong_t sem_nsems;
+ compat_ulong_t __unused1;
+ compat_ulong_t __unused2;
+};
+
+struct compat_msqid64_ds {
+ struct compat_ipc64_perm msg_perm;
+#ifndef CONFIG_CPU_LITTLE_ENDIAN
+ compat_ulong_t __unused1;
+#endif
+ compat_time_t msg_stime;
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+ compat_ulong_t __unused1;
+#endif
+#ifndef CONFIG_CPU_LITTLE_ENDIAN
+ compat_ulong_t __unused2;
+#endif
+ compat_time_t msg_rtime;
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+ compat_ulong_t __unused2;
+#endif
+#ifndef CONFIG_CPU_LITTLE_ENDIAN
+ compat_ulong_t __unused3;
+#endif
+ compat_time_t msg_ctime;
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+ compat_ulong_t __unused3;
+#endif
+ compat_ulong_t msg_cbytes;
+ compat_ulong_t msg_qnum;
+ compat_ulong_t msg_qbytes;
+ compat_pid_t msg_lspid;
+ compat_pid_t msg_lrpid;
+ compat_ulong_t __unused4;
+ compat_ulong_t __unused5;
+};
+
+struct compat_shmid64_ds {
+ struct compat_ipc64_perm shm_perm;
+ compat_size_t shm_segsz;
+ compat_time_t shm_atime;
+ compat_time_t shm_dtime;
+ compat_time_t shm_ctime;
+ compat_pid_t shm_cpid;
+ compat_pid_t shm_lpid;
+ compat_ulong_t shm_nattch;
+ compat_ulong_t __unused1;
+ compat_ulong_t __unused2;
+};
+
+#endif /* _ASM_COMPAT_H */
diff --git a/arch/mips/include/asm/compiler.h b/arch/mips/include/asm/compiler.h
new file mode 100644
index 00000000000..71f5c5cfc58
--- /dev/null
+++ b/arch/mips/include/asm/compiler.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2004, 2007 Maciej W. Rozycki
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef _ASM_COMPILER_H
+#define _ASM_COMPILER_H
+
+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4)
+#define GCC_IMM_ASM() "n"
+#define GCC_REG_ACCUM "$0"
+#else
+#define GCC_IMM_ASM() "rn"
+#define GCC_REG_ACCUM "accum"
+#endif
+
+#endif /* _ASM_COMPILER_H */
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
new file mode 100644
index 00000000000..5ea701fc342
--- /dev/null
+++ b/arch/mips/include/asm/cpu-features.h
@@ -0,0 +1,219 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ * Copyright (C) 2004 Maciej W. Rozycki
+ */
+#ifndef __ASM_CPU_FEATURES_H
+#define __ASM_CPU_FEATURES_H
+
+#include <asm/cpu.h>
+#include <asm/cpu-info.h>
+#include <cpu-feature-overrides.h>
+
+#ifndef current_cpu_type
+#define current_cpu_type() current_cpu_data.cputype
+#endif
+
+/*
+ * SMP assumption: Options of CPU 0 are a superset of all processors.
+ * This is true for all known MIPS systems.
+ */
+#ifndef cpu_has_tlb
+#define cpu_has_tlb (cpu_data[0].options & MIPS_CPU_TLB)
+#endif
+#ifndef cpu_has_4kex
+#define cpu_has_4kex (cpu_data[0].options & MIPS_CPU_4KEX)
+#endif
+#ifndef cpu_has_3k_cache
+#define cpu_has_3k_cache (cpu_data[0].options & MIPS_CPU_3K_CACHE)
+#endif
+#define cpu_has_6k_cache 0
+#define cpu_has_8k_cache 0
+#ifndef cpu_has_4k_cache
+#define cpu_has_4k_cache (cpu_data[0].options & MIPS_CPU_4K_CACHE)
+#endif
+#ifndef cpu_has_tx39_cache
+#define cpu_has_tx39_cache (cpu_data[0].options & MIPS_CPU_TX39_CACHE)
+#endif
+#ifndef cpu_has_fpu
+#define cpu_has_fpu (current_cpu_data.options & MIPS_CPU_FPU)
+#define raw_cpu_has_fpu (raw_current_cpu_data.options & MIPS_CPU_FPU)
+#else
+#define raw_cpu_has_fpu cpu_has_fpu
+#endif
+#ifndef cpu_has_32fpr
+#define cpu_has_32fpr (cpu_data[0].options & MIPS_CPU_32FPR)
+#endif
+#ifndef cpu_has_counter
+#define cpu_has_counter (cpu_data[0].options & MIPS_CPU_COUNTER)
+#endif
+#ifndef cpu_has_watch
+#define cpu_has_watch (cpu_data[0].options & MIPS_CPU_WATCH)
+#endif
+#ifndef cpu_has_divec
+#define cpu_has_divec (cpu_data[0].options & MIPS_CPU_DIVEC)
+#endif
+#ifndef cpu_has_vce
+#define cpu_has_vce (cpu_data[0].options & MIPS_CPU_VCE)
+#endif
+#ifndef cpu_has_cache_cdex_p
+#define cpu_has_cache_cdex_p (cpu_data[0].options & MIPS_CPU_CACHE_CDEX_P)
+#endif
+#ifndef cpu_has_cache_cdex_s
+#define cpu_has_cache_cdex_s (cpu_data[0].options & MIPS_CPU_CACHE_CDEX_S)
+#endif
+#ifndef cpu_has_prefetch
+#define cpu_has_prefetch (cpu_data[0].options & MIPS_CPU_PREFETCH)
+#endif
+#ifndef cpu_has_mcheck
+#define cpu_has_mcheck (cpu_data[0].options & MIPS_CPU_MCHECK)
+#endif
+#ifndef cpu_has_ejtag
+#define cpu_has_ejtag (cpu_data[0].options & MIPS_CPU_EJTAG)
+#endif
+#ifndef cpu_has_llsc
+#define cpu_has_llsc (cpu_data[0].options & MIPS_CPU_LLSC)
+#endif
+#ifndef cpu_has_mips16
+#define cpu_has_mips16 (cpu_data[0].ases & MIPS_ASE_MIPS16)
+#endif
+#ifndef cpu_has_mdmx
+#define cpu_has_mdmx (cpu_data[0].ases & MIPS_ASE_MDMX)
+#endif
+#ifndef cpu_has_mips3d
+#define cpu_has_mips3d (cpu_data[0].ases & MIPS_ASE_MIPS3D)
+#endif
+#ifndef cpu_has_smartmips
+#define cpu_has_smartmips (cpu_data[0].ases & MIPS_ASE_SMARTMIPS)
+#endif
+#ifndef cpu_has_vtag_icache
+#define cpu_has_vtag_icache (cpu_data[0].icache.flags & MIPS_CACHE_VTAG)
+#endif
+#ifndef cpu_has_dc_aliases
+#define cpu_has_dc_aliases (cpu_data[0].dcache.flags & MIPS_CACHE_ALIASES)
+#endif
+#ifndef cpu_has_ic_fills_f_dc
+#define cpu_has_ic_fills_f_dc (cpu_data[0].icache.flags & MIPS_CACHE_IC_F_DC)
+#endif
+#ifndef cpu_has_pindexed_dcache
+#define cpu_has_pindexed_dcache (cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX)
+#endif
+
+/*
+ * I-Cache snoops remote store. This only matters on SMP. Some multiprocessors
+ * such as the R10000 have I-Caches that snoop local stores; the embedded ones
+ * don't. For maintaining I-cache coherency this means we need to flush the
+ * D-cache all the way back to whever the I-cache does refills from, so the
+ * I-cache has a chance to see the new data at all. Then we have to flush the
+ * I-cache also.
+ * Note we may have been rescheduled and may no longer be running on the CPU
+ * that did the store so we can't optimize this into only doing the flush on
+ * the local CPU.
+ */
+#ifndef cpu_icache_snoops_remote_store
+#ifdef CONFIG_SMP
+#define cpu_icache_snoops_remote_store (cpu_data[0].icache.flags & MIPS_IC_SNOOPS_REMOTE)
+#else
+#define cpu_icache_snoops_remote_store 1
+#endif
+#endif
+
+# ifndef cpu_has_mips32r1
+# define cpu_has_mips32r1 (cpu_data[0].isa_level & MIPS_CPU_ISA_M32R1)
+# endif
+# ifndef cpu_has_mips32r2
+# define cpu_has_mips32r2 (cpu_data[0].isa_level & MIPS_CPU_ISA_M32R2)
+# endif
+# ifndef cpu_has_mips64r1
+# define cpu_has_mips64r1 (cpu_data[0].isa_level & MIPS_CPU_ISA_M64R1)
+# endif
+# ifndef cpu_has_mips64r2
+# define cpu_has_mips64r2 (cpu_data[0].isa_level & MIPS_CPU_ISA_M64R2)
+# endif
+
+/*
+ * Shortcuts ...
+ */
+#define cpu_has_mips32 (cpu_has_mips32r1 | cpu_has_mips32r2)
+#define cpu_has_mips64 (cpu_has_mips64r1 | cpu_has_mips64r2)
+#define cpu_has_mips_r1 (cpu_has_mips32r1 | cpu_has_mips64r1)
+#define cpu_has_mips_r2 (cpu_has_mips32r2 | cpu_has_mips64r2)
+
+#ifndef cpu_has_dsp
+#define cpu_has_dsp (cpu_data[0].ases & MIPS_ASE_DSP)
+#endif
+
+#ifndef cpu_has_mipsmt
+#define cpu_has_mipsmt (cpu_data[0].ases & MIPS_ASE_MIPSMT)
+#endif
+
+#ifndef cpu_has_userlocal
+#define cpu_has_userlocal (cpu_data[0].options & MIPS_CPU_ULRI)
+#endif
+
+#ifdef CONFIG_32BIT
+# ifndef cpu_has_nofpuex
+# define cpu_has_nofpuex (cpu_data[0].options & MIPS_CPU_NOFPUEX)
+# endif
+# ifndef cpu_has_64bits
+# define cpu_has_64bits (cpu_data[0].isa_level & MIPS_CPU_ISA_64BIT)
+# endif
+# ifndef cpu_has_64bit_zero_reg
+# define cpu_has_64bit_zero_reg (cpu_data[0].isa_level & MIPS_CPU_ISA_64BIT)
+# endif
+# ifndef cpu_has_64bit_gp_regs
+# define cpu_has_64bit_gp_regs 0
+# endif
+# ifndef cpu_has_64bit_addresses
+# define cpu_has_64bit_addresses 0
+# endif
+#endif
+
+#ifdef CONFIG_64BIT
+# ifndef cpu_has_nofpuex
+# define cpu_has_nofpuex 0
+# endif
+# ifndef cpu_has_64bits
+# define cpu_has_64bits 1
+# endif
+# ifndef cpu_has_64bit_zero_reg
+# define cpu_has_64bit_zero_reg 1
+# endif
+# ifndef cpu_has_64bit_gp_regs
+# define cpu_has_64bit_gp_regs 1
+# endif
+# ifndef cpu_has_64bit_addresses
+# define cpu_has_64bit_addresses 1
+# endif
+#endif
+
+#if defined(CONFIG_CPU_MIPSR2_IRQ_VI) && !defined(cpu_has_vint)
+# define cpu_has_vint (cpu_data[0].options & MIPS_CPU_VINT)
+#elif !defined(cpu_has_vint)
+# define cpu_has_vint 0
+#endif
+
+#if defined(CONFIG_CPU_MIPSR2_IRQ_EI) && !defined(cpu_has_veic)
+# define cpu_has_veic (cpu_data[0].options & MIPS_CPU_VEIC)
+#elif !defined(cpu_has_veic)
+# define cpu_has_veic 0
+#endif
+
+#ifndef cpu_has_inclusive_pcaches
+#define cpu_has_inclusive_pcaches (cpu_data[0].options & MIPS_CPU_INCLUSIVE_CACHES)
+#endif
+
+#ifndef cpu_dcache_line_size
+#define cpu_dcache_line_size() cpu_data[0].dcache.linesz
+#endif
+#ifndef cpu_icache_line_size
+#define cpu_icache_line_size() cpu_data[0].icache.linesz
+#endif
+#ifndef cpu_scache_line_size
+#define cpu_scache_line_size() cpu_data[0].scache.linesz
+#endif
+
+#endif /* __ASM_CPU_FEATURES_H */
diff --git a/arch/mips/include/asm/cpu-info.h b/arch/mips/include/asm/cpu-info.h
new file mode 100644
index 00000000000..744cd8fb107
--- /dev/null
+++ b/arch/mips/include/asm/cpu-info.h
@@ -0,0 +1,90 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 Waldorf GMBH
+ * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2001, 2002, 2003 Ralf Baechle
+ * Copyright (C) 1996 Paul M. Antoine
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2004 Maciej W. Rozycki
+ */
+#ifndef __ASM_CPU_INFO_H
+#define __ASM_CPU_INFO_H
+
+#include <linux/types.h>
+
+#include <asm/cache.h>
+
+/*
+ * Descriptor for a cache
+ */
+struct cache_desc {
+ unsigned int waysize; /* Bytes per way */
+ unsigned short sets; /* Number of lines per set */
+ unsigned char ways; /* Number of ways */
+ unsigned char linesz; /* Size of line in bytes */
+ unsigned char waybit; /* Bits to select in a cache set */
+ unsigned char flags; /* Flags describing cache properties */
+};
+
+/*
+ * Flag definitions
+ */
+#define MIPS_CACHE_NOT_PRESENT 0x00000001
+#define MIPS_CACHE_VTAG 0x00000002 /* Virtually tagged cache */
+#define MIPS_CACHE_ALIASES 0x00000004 /* Cache could have aliases */
+#define MIPS_CACHE_IC_F_DC 0x00000008 /* Ic can refill from D-cache */
+#define MIPS_IC_SNOOPS_REMOTE 0x00000010 /* Ic snoops remote stores */
+#define MIPS_CACHE_PINDEX 0x00000020 /* Physically indexed cache */
+
+struct cpuinfo_mips {
+ unsigned long udelay_val;
+ unsigned long asid_cache;
+
+ /*
+ * Capability and feature descriptor structure for MIPS CPU
+ */
+ unsigned long options;
+ unsigned long ases;
+ unsigned int processor_id;
+ unsigned int fpu_id;
+ unsigned int cputype;
+ int isa_level;
+ int tlbsize;
+ struct cache_desc icache; /* Primary I-cache */
+ struct cache_desc dcache; /* Primary D or combined I/D cache */
+ struct cache_desc scache; /* Secondary cache */
+ struct cache_desc tcache; /* Tertiary/split secondary cache */
+ int srsets; /* Shadow register sets */
+ int core; /* physical core number */
+#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
+ /*
+ * In the MIPS MT "SMTC" model, each TC is considered
+ * to be a "CPU" for the purposes of scheduling, but
+ * exception resources, ASID spaces, etc, are common
+ * to all TCs within the same VPE.
+ */
+ int vpe_id; /* Virtual Processor number */
+#endif
+#ifdef CONFIG_MIPS_MT_SMTC
+ int tc_id; /* Thread Context number */
+#endif
+ void *data; /* Additional data */
+ unsigned int watch_reg_count; /* Number that exist */
+ unsigned int watch_reg_use_cnt; /* Usable by ptrace */
+#define NUM_WATCH_REGS 4
+ u16 watch_reg_masks[NUM_WATCH_REGS];
+} __attribute__((aligned(SMP_CACHE_BYTES)));
+
+extern struct cpuinfo_mips cpu_data[];
+#define current_cpu_data cpu_data[smp_processor_id()]
+#define raw_current_cpu_data cpu_data[raw_smp_processor_id()]
+
+extern void cpu_probe(void);
+extern void cpu_report(void);
+
+extern const char *__cpu_name[];
+#define cpu_name_string() __cpu_name[smp_processor_id()]
+
+#endif /* __ASM_CPU_INFO_H */
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
new file mode 100644
index 00000000000..229a786101d
--- /dev/null
+++ b/arch/mips/include/asm/cpu.h
@@ -0,0 +1,267 @@
+/*
+ * cpu.h: Values of the PRId register used to match up
+ * various MIPS cpu types.
+ *
+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 2004 Maciej W. Rozycki
+ */
+#ifndef _ASM_CPU_H
+#define _ASM_CPU_H
+
+/* Assigned Company values for bits 23:16 of the PRId Register
+ (CP0 register 15, select 0). As of the MIPS32 and MIPS64 specs from
+ MTI, the PRId register is defined in this (backwards compatible)
+ way:
+
+ +----------------+----------------+----------------+----------------+
+ | Company Options| Company ID | Processor ID | Revision |
+ +----------------+----------------+----------------+----------------+
+ 31 24 23 16 15 8 7
+
+ I don't have docs for all the previous processors, but my impression is
+ that bits 16-23 have been 0 for all MIPS processors before the MIPS32/64
+ spec.
+*/
+
+#define PRID_COMP_LEGACY 0x000000
+#define PRID_COMP_MIPS 0x010000
+#define PRID_COMP_BROADCOM 0x020000
+#define PRID_COMP_ALCHEMY 0x030000
+#define PRID_COMP_SIBYTE 0x040000
+#define PRID_COMP_SANDCRAFT 0x050000
+#define PRID_COMP_NXP 0x060000
+#define PRID_COMP_TOSHIBA 0x070000
+#define PRID_COMP_LSI 0x080000
+#define PRID_COMP_LEXRA 0x0b0000
+
+
+/*
+ * Assigned values for the product ID register. In order to detect a
+ * certain CPU type exactly eventually additional registers may need to
+ * be examined. These are valid when 23:16 == PRID_COMP_LEGACY
+ */
+#define PRID_IMP_R2000 0x0100
+#define PRID_IMP_AU1_REV1 0x0100
+#define PRID_IMP_AU1_REV2 0x0200
+#define PRID_IMP_R3000 0x0200 /* Same as R2000A */
+#define PRID_IMP_R6000 0x0300 /* Same as R3000A */
+#define PRID_IMP_R4000 0x0400
+#define PRID_IMP_R6000A 0x0600
+#define PRID_IMP_R10000 0x0900
+#define PRID_IMP_R4300 0x0b00
+#define PRID_IMP_VR41XX 0x0c00
+#define PRID_IMP_R12000 0x0e00
+#define PRID_IMP_R14000 0x0f00
+#define PRID_IMP_R8000 0x1000
+#define PRID_IMP_PR4450 0x1200
+#define PRID_IMP_R4600 0x2000
+#define PRID_IMP_R4700 0x2100
+#define PRID_IMP_TX39 0x2200
+#define PRID_IMP_R4640 0x2200
+#define PRID_IMP_R4650 0x2200 /* Same as R4640 */
+#define PRID_IMP_R5000 0x2300
+#define PRID_IMP_TX49 0x2d00
+#define PRID_IMP_SONIC 0x2400
+#define PRID_IMP_MAGIC 0x2500
+#define PRID_IMP_RM7000 0x2700
+#define PRID_IMP_NEVADA 0x2800 /* RM5260 ??? */
+#define PRID_IMP_RM9000 0x3400
+#define PRID_IMP_LOONGSON1 0x4200
+#define PRID_IMP_R5432 0x5400
+#define PRID_IMP_R5500 0x5500
+#define PRID_IMP_LOONGSON2 0x6300
+
+#define PRID_IMP_UNKNOWN 0xff00
+
+/*
+ * These are the PRID's for when 23:16 == PRID_COMP_MIPS
+ */
+
+#define PRID_IMP_4KC 0x8000
+#define PRID_IMP_5KC 0x8100
+#define PRID_IMP_20KC 0x8200
+#define PRID_IMP_4KEC 0x8400
+#define PRID_IMP_4KSC 0x8600
+#define PRID_IMP_25KF 0x8800
+#define PRID_IMP_5KE 0x8900
+#define PRID_IMP_4KECR2 0x9000
+#define PRID_IMP_4KEMPR2 0x9100
+#define PRID_IMP_4KSD 0x9200
+#define PRID_IMP_24K 0x9300
+#define PRID_IMP_34K 0x9500
+#define PRID_IMP_24KE 0x9600
+#define PRID_IMP_74K 0x9700
+#define PRID_IMP_1004K 0x9900
+
+/*
+ * These are the PRID's for when 23:16 == PRID_COMP_SIBYTE
+ */
+
+#define PRID_IMP_SB1 0x0100
+#define PRID_IMP_SB1A 0x1100
+
+/*
+ * These are the PRID's for when 23:16 == PRID_COMP_SANDCRAFT
+ */
+
+#define PRID_IMP_SR71000 0x0400
+
+/*
+ * These are the PRID's for when 23:16 == PRID_COMP_BROADCOM
+ */
+
+#define PRID_IMP_BCM4710 0x4000
+#define PRID_IMP_BCM3302 0x9000
+
+/*
+ * Definitions for 7:0 on legacy processors
+ */
+
+#define PRID_REV_MASK 0x00ff
+
+#define PRID_REV_TX4927 0x0022
+#define PRID_REV_TX4937 0x0030
+#define PRID_REV_R4400 0x0040
+#define PRID_REV_R3000A 0x0030
+#define PRID_REV_R3000 0x0020
+#define PRID_REV_R2000A 0x0010
+#define PRID_REV_TX3912 0x0010
+#define PRID_REV_TX3922 0x0030
+#define PRID_REV_TX3927 0x0040
+#define PRID_REV_VR4111 0x0050
+#define PRID_REV_VR4181 0x0050 /* Same as VR4111 */
+#define PRID_REV_VR4121 0x0060
+#define PRID_REV_VR4122 0x0070
+#define PRID_REV_VR4181A 0x0070 /* Same as VR4122 */
+#define PRID_REV_VR4130 0x0080
+#define PRID_REV_34K_V1_0_2 0x0022
+
+/*
+ * Older processors used to encode processor version and revision in two
+ * 4-bit bitfields, the 4K seems to simply count up and even newer MTI cores
+ * have switched to use the 8-bits as 3:3:2 bitfield with the last field as
+ * the patch number. *ARGH*
+ */
+#define PRID_REV_ENCODE_44(ver, rev) \
+ ((ver) << 4 | (rev))
+#define PRID_REV_ENCODE_332(ver, rev, patch) \
+ ((ver) << 5 | (rev) << 2 | (patch))
+
+/*
+ * FPU implementation/revision register (CP1 control register 0).
+ *
+ * +---------------------------------+----------------+----------------+
+ * | 0 | Implementation | Revision |
+ * +---------------------------------+----------------+----------------+
+ * 31 16 15 8 7 0
+ */
+
+#define FPIR_IMP_NONE 0x0000
+
+enum cpu_type_enum {
+ CPU_UNKNOWN,
+
+ /*
+ * R2000 class processors
+ */
+ CPU_R2000, CPU_R3000, CPU_R3000A, CPU_R3041, CPU_R3051, CPU_R3052,
+ CPU_R3081, CPU_R3081E,
+
+ /*
+ * R6000 class processors
+ */
+ CPU_R6000, CPU_R6000A,
+
+ /*
+ * R4000 class processors
+ */
+ CPU_R4000PC, CPU_R4000SC, CPU_R4000MC, CPU_R4200, CPU_R4300, CPU_R4310,
+ CPU_R4400PC, CPU_R4400SC, CPU_R4400MC, CPU_R4600, CPU_R4640, CPU_R4650,
+ CPU_R4700, CPU_R5000, CPU_R5000A, CPU_R5500, CPU_NEVADA, CPU_R5432,
+ CPU_R10000, CPU_R12000, CPU_R14000, CPU_VR41XX, CPU_VR4111, CPU_VR4121,
+ CPU_VR4122, CPU_VR4131, CPU_VR4133, CPU_VR4181, CPU_VR4181A, CPU_RM7000,
+ CPU_SR71000, CPU_RM9000, CPU_TX49XX,
+
+ /*
+ * R8000 class processors
+ */
+ CPU_R8000,
+
+ /*
+ * TX3900 class processors
+ */
+ CPU_TX3912, CPU_TX3922, CPU_TX3927,
+
+ /*
+ * MIPS32 class processors
+ */
+ CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K,
+ CPU_AU1000, CPU_AU1100, CPU_AU1200, CPU_AU1210, CPU_AU1250, CPU_AU1500,
+ CPU_AU1550, CPU_PR4450, CPU_BCM3302, CPU_BCM4710,
+
+ /*
+ * MIPS64 class processors
+ */
+ CPU_5KC, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2,
+
+ CPU_LAST
+};
+
+
+/*
+ * ISA Level encodings
+ *
+ */
+#define MIPS_CPU_ISA_I 0x00000001
+#define MIPS_CPU_ISA_II 0x00000002
+#define MIPS_CPU_ISA_III 0x00000004
+#define MIPS_CPU_ISA_IV 0x00000008
+#define MIPS_CPU_ISA_V 0x00000010
+#define MIPS_CPU_ISA_M32R1 0x00000020
+#define MIPS_CPU_ISA_M32R2 0x00000040
+#define MIPS_CPU_ISA_M64R1 0x00000080
+#define MIPS_CPU_ISA_M64R2 0x00000100
+
+#define MIPS_CPU_ISA_32BIT (MIPS_CPU_ISA_I | MIPS_CPU_ISA_II | \
+ MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 )
+#define MIPS_CPU_ISA_64BIT (MIPS_CPU_ISA_III | MIPS_CPU_ISA_IV | \
+ MIPS_CPU_ISA_V | MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2)
+
+/*
+ * CPU Option encodings
+ */
+#define MIPS_CPU_TLB 0x00000001 /* CPU has TLB */
+#define MIPS_CPU_4KEX 0x00000002 /* "R4K" exception model */
+#define MIPS_CPU_3K_CACHE 0x00000004 /* R3000-style caches */
+#define MIPS_CPU_4K_CACHE 0x00000008 /* R4000-style caches */
+#define MIPS_CPU_TX39_CACHE 0x00000010 /* TX3900-style caches */
+#define MIPS_CPU_FPU 0x00000020 /* CPU has FPU */
+#define MIPS_CPU_32FPR 0x00000040 /* 32 dbl. prec. FP registers */
+#define MIPS_CPU_COUNTER 0x00000080 /* Cycle count/compare */
+#define MIPS_CPU_WATCH 0x00000100 /* watchpoint registers */
+#define MIPS_CPU_DIVEC 0x00000200 /* dedicated interrupt vector */
+#define MIPS_CPU_VCE 0x00000400 /* virt. coherence conflict possible */
+#define MIPS_CPU_CACHE_CDEX_P 0x00000800 /* Create_Dirty_Exclusive CACHE op */
+#define MIPS_CPU_CACHE_CDEX_S 0x00001000 /* ... same for seconary cache ... */
+#define MIPS_CPU_MCHECK 0x00002000 /* Machine check exception */
+#define MIPS_CPU_EJTAG 0x00004000 /* EJTAG exception */
+#define MIPS_CPU_NOFPUEX 0x00008000 /* no FPU exception */
+#define MIPS_CPU_LLSC 0x00010000 /* CPU has ll/sc instructions */
+#define MIPS_CPU_INCLUSIVE_CACHES 0x00020000 /* P-cache subset enforced */
+#define MIPS_CPU_PREFETCH 0x00040000 /* CPU has usable prefetch */
+#define MIPS_CPU_VINT 0x00080000 /* CPU supports MIPSR2 vectored interrupts */
+#define MIPS_CPU_VEIC 0x00100000 /* CPU supports MIPSR2 external interrupt controller mode */
+#define MIPS_CPU_ULRI 0x00200000 /* CPU has ULRI feature */
+
+/*
+ * CPU ASE encodings
+ */
+#define MIPS_ASE_MIPS16 0x00000001 /* code compression */
+#define MIPS_ASE_MDMX 0x00000002 /* MIPS digital media extension */
+#define MIPS_ASE_MIPS3D 0x00000004 /* MIPS-3D */
+#define MIPS_ASE_SMARTMIPS 0x00000008 /* SmartMIPS */
+#define MIPS_ASE_DSP 0x00000010 /* Signal Processing ASE */
+#define MIPS_ASE_MIPSMT 0x00000020 /* CPU supports MIPS MT */
+
+
+#endif /* _ASM_CPU_H */
diff --git a/arch/mips/include/asm/cputime.h b/arch/mips/include/asm/cputime.h
new file mode 100644
index 00000000000..c00eacbdd97
--- /dev/null
+++ b/arch/mips/include/asm/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __MIPS_CPUTIME_H
+#define __MIPS_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __MIPS_CPUTIME_H */
diff --git a/arch/mips/include/asm/current.h b/arch/mips/include/asm/current.h
new file mode 100644
index 00000000000..559db66b979
--- /dev/null
+++ b/arch/mips/include/asm/current.h
@@ -0,0 +1,23 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2002 Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_CURRENT_H
+#define _ASM_CURRENT_H
+
+#include <linux/thread_info.h>
+
+struct task_struct;
+
+static inline struct task_struct * get_current(void)
+{
+ return current_thread_info()->task;
+}
+
+#define current get_current()
+
+#endif /* _ASM_CURRENT_H */
diff --git a/arch/mips/include/asm/debug.h b/arch/mips/include/asm/debug.h
new file mode 100644
index 00000000000..1fd5a2b3944
--- /dev/null
+++ b/arch/mips/include/asm/debug.h
@@ -0,0 +1,48 @@
+/*
+ * Debug macros for run-time debugging.
+ * Turned on/off with CONFIG_RUNTIME_DEBUG option.
+ *
+ * Copyright (C) 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef _ASM_DEBUG_H
+#define _ASM_DEBUG_H
+
+
+/*
+ * run-time macros for catching spurious errors. Eable CONFIG_RUNTIME_DEBUG in
+ * kernel hacking config menu to use them.
+ *
+ * Use them as run-time debugging aid. NEVER USE THEM AS ERROR HANDLING CODE!!!
+ */
+
+#ifdef CONFIG_RUNTIME_DEBUG
+
+#include <linux/kernel.h>
+
+#define db_assert(x) if (!(x)) { \
+ panic("assertion failed at %s:%d: %s", __FILE__, __LINE__, #x); }
+#define db_warn(x) if (!(x)) { \
+ printk(KERN_WARNING "warning at %s:%d: %s", __FILE__, __LINE__, #x); }
+#define db_verify(x, y) db_assert(x y)
+#define db_verify_warn(x, y) db_warn(x y)
+#define db_run(x) do { x; } while (0)
+
+#else
+
+#define db_assert(x)
+#define db_warn(x)
+#define db_verify(x, y) x
+#define db_verify_warn(x, y) x
+#define db_run(x)
+
+#endif
+
+#endif /* _ASM_DEBUG_H */
diff --git a/arch/mips/include/asm/dec/ecc.h b/arch/mips/include/asm/dec/ecc.h
new file mode 100644
index 00000000000..707ffdbc9ad
--- /dev/null
+++ b/arch/mips/include/asm/dec/ecc.h
@@ -0,0 +1,55 @@
+/*
+ * include/asm-mips/dec/ecc.h
+ *
+ * ECC handling logic definitions common to DECstation/DECsystem
+ * 5000/200 (KN02), 5000/240 (KN03), 5000/260 (KN05) and
+ * DECsystem 5900 (KN03), 5900/260 (KN05) systems.
+ *
+ * Copyright (C) 2003 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MIPS_DEC_ECC_H
+#define __ASM_MIPS_DEC_ECC_H
+
+/*
+ * Error Address Register bits.
+ * The register is r/wc -- any write clears it.
+ */
+#define KN0X_EAR_VALID (1<<31) /* error data valid, bus IRQ */
+#define KN0X_EAR_CPU (1<<30) /* CPU/DMA transaction */
+#define KN0X_EAR_WRITE (1<<29) /* write/read transaction */
+#define KN0X_EAR_ECCERR (1<<28) /* ECC/timeout or overrun */
+#define KN0X_EAR_RES_27 (1<<27) /* unused */
+#define KN0X_EAR_ADDRESS (0x7ffffff<<0) /* address involved */
+
+/*
+ * Error Syndrome Register bits.
+ * The register is frozen when EAR.VALID is set, otherwise it records bits
+ * from the last memory read. The register is r/wc -- any write clears it.
+ */
+#define KN0X_ESR_VLDHI (1<<31) /* error data valid hi word */
+#define KN0X_ESR_CHKHI (0x7f<<24) /* check bits read from mem */
+#define KN0X_ESR_SNGHI (1<<23) /* single/double bit error */
+#define KN0X_ESR_SYNHI (0x7f<<16) /* syndrome from ECC logic */
+#define KN0X_ESR_VLDLO (1<<15) /* error data valid lo word */
+#define KN0X_ESR_CHKLO (0x7f<<8) /* check bits read from mem */
+#define KN0X_ESR_SNGLO (1<<7) /* single/double bit error */
+#define KN0X_ESR_SYNLO (0x7f<<0) /* syndrome from ECC logic */
+
+
+#ifndef __ASSEMBLY__
+
+#include <linux/interrupt.h>
+
+struct pt_regs;
+
+extern void dec_ecc_be_init(void);
+extern int dec_ecc_be_handler(struct pt_regs *regs, int is_fixup);
+extern irqreturn_t dec_ecc_be_interrupt(int irq, void *dev_id);
+#endif
+
+#endif /* __ASM_MIPS_DEC_ECC_H */
diff --git a/arch/mips/include/asm/dec/interrupts.h b/arch/mips/include/asm/dec/interrupts.h
new file mode 100644
index 00000000000..e10d341067c
--- /dev/null
+++ b/arch/mips/include/asm/dec/interrupts.h
@@ -0,0 +1,126 @@
+/*
+ * Miscellaneous definitions used to initialise the interrupt vector table
+ * with the machine-specific interrupt routines.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997 by Paul M. Antoine.
+ * reworked 1998 by Harald Koerfgen.
+ * Copyright (C) 2001, 2002, 2003 Maciej W. Rozycki
+ */
+
+#ifndef __ASM_DEC_INTERRUPTS_H
+#define __ASM_DEC_INTERRUPTS_H
+
+#include <irq.h>
+#include <asm/mipsregs.h>
+
+
+/*
+ * The list of possible system devices which provide an
+ * interrupt. Not all devices exist on a given system.
+ */
+#define DEC_IRQ_CASCADE 0 /* cascade from CSR or I/O ASIC */
+
+/* Ordinary interrupts */
+#define DEC_IRQ_AB_RECV 1 /* ACCESS.bus receive */
+#define DEC_IRQ_AB_XMIT 2 /* ACCESS.bus transmit */
+#define DEC_IRQ_DZ11 3 /* DZ11 (DC7085) serial */
+#define DEC_IRQ_ASC 4 /* ASC (NCR53C94) SCSI */
+#define DEC_IRQ_FLOPPY 5 /* 82077 FDC */
+#define DEC_IRQ_FPU 6 /* R3k FPU */
+#define DEC_IRQ_HALT 7 /* HALT button or from ACCESS.Bus */
+#define DEC_IRQ_ISDN 8 /* Am79C30A ISDN */
+#define DEC_IRQ_LANCE 9 /* LANCE (Am7990) Ethernet */
+#define DEC_IRQ_BUS 10 /* memory, I/O bus read/write errors */
+#define DEC_IRQ_PSU 11 /* power supply unit warning */
+#define DEC_IRQ_RTC 12 /* DS1287 RTC */
+#define DEC_IRQ_SCC0 13 /* SCC (Z85C30) serial #0 */
+#define DEC_IRQ_SCC1 14 /* SCC (Z85C30) serial #1 */
+#define DEC_IRQ_SII 15 /* SII (DC7061) SCSI */
+#define DEC_IRQ_TC0 16 /* TURBOchannel slot #0 */
+#define DEC_IRQ_TC1 17 /* TURBOchannel slot #1 */
+#define DEC_IRQ_TC2 18 /* TURBOchannel slot #2 */
+#define DEC_IRQ_TIMER 19 /* ARC periodic timer */
+#define DEC_IRQ_VIDEO 20 /* framebuffer */
+
+/* I/O ASIC DMA interrupts */
+#define DEC_IRQ_ASC_MERR 21 /* ASC memory read error */
+#define DEC_IRQ_ASC_ERR 22 /* ASC page overrun */
+#define DEC_IRQ_ASC_DMA 23 /* ASC buffer pointer loaded */
+#define DEC_IRQ_FLOPPY_ERR 24 /* FDC error */
+#define DEC_IRQ_ISDN_ERR 25 /* ISDN memory read/overrun error */
+#define DEC_IRQ_ISDN_RXDMA 26 /* ISDN recv buffer pointer loaded */
+#define DEC_IRQ_ISDN_TXDMA 27 /* ISDN xmit buffer pointer loaded */
+#define DEC_IRQ_LANCE_MERR 28 /* LANCE memory read error */
+#define DEC_IRQ_SCC0A_RXERR 29 /* SCC0A (printer) receive overrun */
+#define DEC_IRQ_SCC0A_RXDMA 30 /* SCC0A receive half page */
+#define DEC_IRQ_SCC0A_TXERR 31 /* SCC0A xmit memory read/overrun */
+#define DEC_IRQ_SCC0A_TXDMA 32 /* SCC0A transmit page end */
+#define DEC_IRQ_AB_RXERR 33 /* ACCESS.bus receive overrun */
+#define DEC_IRQ_AB_RXDMA 34 /* ACCESS.bus receive half page */
+#define DEC_IRQ_AB_TXERR 35 /* ACCESS.bus xmit memory read/ovrn */
+#define DEC_IRQ_AB_TXDMA 36 /* ACCESS.bus transmit page end */
+#define DEC_IRQ_SCC1A_RXERR 37 /* SCC1A (modem) receive overrun */
+#define DEC_IRQ_SCC1A_RXDMA 38 /* SCC1A receive half page */
+#define DEC_IRQ_SCC1A_TXERR 39 /* SCC1A xmit memory read/overrun */
+#define DEC_IRQ_SCC1A_TXDMA 40 /* SCC1A transmit page end */
+
+/* TC5 & TC6 are virtual slots for KN02's onboard devices */
+#define DEC_IRQ_TC5 DEC_IRQ_ASC /* virtual PMAZ-AA */
+#define DEC_IRQ_TC6 DEC_IRQ_LANCE /* virtual PMAD-AA */
+
+#define DEC_NR_INTS 41
+
+
+/* Largest of cpu mask_nr tables. */
+#define DEC_MAX_CPU_INTS 6
+/* Largest of asic mask_nr tables. */
+#define DEC_MAX_ASIC_INTS 9
+
+
+/*
+ * CPU interrupt bits common to all systems.
+ */
+#define DEC_CPU_INR_FPU 7 /* R3k FPU */
+#define DEC_CPU_INR_SW1 1 /* software #1 */
+#define DEC_CPU_INR_SW0 0 /* software #0 */
+
+#define DEC_CPU_IRQ_BASE MIPS_CPU_IRQ_BASE /* first IRQ assigned to CPU */
+
+#define DEC_CPU_IRQ_NR(n) ((n) + DEC_CPU_IRQ_BASE)
+#define DEC_CPU_IRQ_MASK(n) (1 << ((n) + CAUSEB_IP))
+#define DEC_CPU_IRQ_ALL (0xff << CAUSEB_IP)
+
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Interrupt table structures to hide differences between systems.
+ */
+typedef union { int i; void *p; } int_ptr;
+extern int dec_interrupt[DEC_NR_INTS];
+extern int_ptr cpu_mask_nr_tbl[DEC_MAX_CPU_INTS][2];
+extern int_ptr asic_mask_nr_tbl[DEC_MAX_ASIC_INTS][2];
+extern int cpu_fpu_mask;
+
+
+/*
+ * Common interrupt routine prototypes for all DECStations
+ */
+extern void kn02_io_int(void);
+extern void kn02xa_io_int(void);
+extern void kn03_io_int(void);
+extern void asic_dma_int(void);
+extern void asic_all_int(void);
+extern void kn02_all_int(void);
+extern void cpu_all_int(void);
+
+extern void dec_intr_unimplemented(void);
+extern void asic_intr_unimplemented(void);
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/arch/mips/include/asm/dec/ioasic.h b/arch/mips/include/asm/dec/ioasic.h
new file mode 100644
index 00000000000..98badd6bf22
--- /dev/null
+++ b/arch/mips/include/asm/dec/ioasic.h
@@ -0,0 +1,38 @@
+/*
+ * include/asm-mips/dec/ioasic.h
+ *
+ * DEC I/O ASIC access operations.
+ *
+ * Copyright (C) 2000, 2002, 2003 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __ASM_DEC_IOASIC_H
+#define __ASM_DEC_IOASIC_H
+
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+extern spinlock_t ioasic_ssr_lock;
+
+extern volatile u32 *ioasic_base;
+
+static inline void ioasic_write(unsigned int reg, u32 v)
+{
+ ioasic_base[reg / 4] = v;
+}
+
+static inline u32 ioasic_read(unsigned int reg)
+{
+ return ioasic_base[reg / 4];
+}
+
+extern void init_ioasic_irqs(int base);
+
+extern void dec_ioasic_clocksource_init(void);
+
+#endif /* __ASM_DEC_IOASIC_H */
diff --git a/arch/mips/include/asm/dec/ioasic_addrs.h b/arch/mips/include/asm/dec/ioasic_addrs.h
new file mode 100644
index 00000000000..4cbc1f8a112
--- /dev/null
+++ b/arch/mips/include/asm/dec/ioasic_addrs.h
@@ -0,0 +1,152 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Definitions for the address map in the JUNKIO Asic
+ *
+ * Created with Information from:
+ *
+ * "DEC 3000 300/400/500/600/700/800/900 AXP Models System Programmer's Manual"
+ *
+ * and the Mach Sources
+ *
+ * Copyright (C) 199x the Anonymous
+ * Copyright (C) 2002, 2003 Maciej W. Rozycki
+ */
+
+#ifndef __ASM_MIPS_DEC_IOASIC_ADDRS_H
+#define __ASM_MIPS_DEC_IOASIC_ADDRS_H
+
+#define IOASIC_SLOT_SIZE 0x00040000
+
+/*
+ * Address ranges decoded by the I/O ASIC for onboard devices.
+ */
+#define IOASIC_SYS_ROM (0*IOASIC_SLOT_SIZE) /* system board ROM */
+#define IOASIC_IOCTL (1*IOASIC_SLOT_SIZE) /* I/O ASIC */
+#define IOASIC_ESAR (2*IOASIC_SLOT_SIZE) /* LANCE MAC address chip */
+#define IOASIC_LANCE (3*IOASIC_SLOT_SIZE) /* LANCE Ethernet */
+#define IOASIC_SCC0 (4*IOASIC_SLOT_SIZE) /* SCC #0 */
+#define IOASIC_VDAC_HI (5*IOASIC_SLOT_SIZE) /* VDAC (maxine) */
+#define IOASIC_SCC1 (6*IOASIC_SLOT_SIZE) /* SCC #1 (3min, 3max+) */
+#define IOASIC_VDAC_LO (7*IOASIC_SLOT_SIZE) /* VDAC (maxine) */
+#define IOASIC_TOY (8*IOASIC_SLOT_SIZE) /* RTC */
+#define IOASIC_ISDN (9*IOASIC_SLOT_SIZE) /* ISDN (maxine) */
+#define IOASIC_ERRADDR (9*IOASIC_SLOT_SIZE) /* bus error address (3max+) */
+#define IOASIC_CHKSYN (10*IOASIC_SLOT_SIZE) /* ECC syndrome (3max+) */
+#define IOASIC_ACC_BUS (10*IOASIC_SLOT_SIZE) /* ACCESS.bus (maxine) */
+#define IOASIC_MCR (11*IOASIC_SLOT_SIZE) /* memory control (3max+) */
+#define IOASIC_FLOPPY (11*IOASIC_SLOT_SIZE) /* FDC (maxine) */
+#define IOASIC_SCSI (12*IOASIC_SLOT_SIZE) /* ASC SCSI */
+#define IOASIC_FDC_DMA (13*IOASIC_SLOT_SIZE) /* FDC DMA (maxine) */
+#define IOASIC_SCSI_DMA (14*IOASIC_SLOT_SIZE) /* ??? */
+#define IOASIC_RES_15 (15*IOASIC_SLOT_SIZE) /* unused? */
+
+
+/*
+ * Offsets for I/O ASIC registers
+ * (relative to (dec_kn_slot_base + IOASIC_IOCTL)).
+ */
+ /* all systems */
+#define IO_REG_SCSI_DMA_P 0x00 /* SCSI DMA Pointer */
+#define IO_REG_SCSI_DMA_BP 0x10 /* SCSI DMA Buffer Pointer */
+#define IO_REG_LANCE_DMA_P 0x20 /* LANCE DMA Pointer */
+#define IO_REG_SCC0A_T_DMA_P 0x30 /* SCC0A Transmit DMA Pointer */
+#define IO_REG_SCC0A_R_DMA_P 0x40 /* SCC0A Receive DMA Pointer */
+
+ /* except Maxine */
+#define IO_REG_SCC1A_T_DMA_P 0x50 /* SCC1A Transmit DMA Pointer */
+#define IO_REG_SCC1A_R_DMA_P 0x60 /* SCC1A Receive DMA Pointer */
+
+ /* Maxine */
+#define IO_REG_AB_T_DMA_P 0x50 /* ACCESS.bus Transmit DMA Pointer */
+#define IO_REG_AB_R_DMA_P 0x60 /* ACCESS.bus Receive DMA Pointer */
+#define IO_REG_FLOPPY_DMA_P 0x70 /* Floppy DMA Pointer */
+#define IO_REG_ISDN_T_DMA_P 0x80 /* ISDN Transmit DMA Pointer */
+#define IO_REG_ISDN_T_DMA_BP 0x90 /* ISDN Transmit DMA Buffer Pointer */
+#define IO_REG_ISDN_R_DMA_P 0xa0 /* ISDN Receive DMA Pointer */
+#define IO_REG_ISDN_R_DMA_BP 0xb0 /* ISDN Receive DMA Buffer Pointer */
+
+ /* all systems */
+#define IO_REG_DATA_0 0xc0 /* System Data Buffer 0 */
+#define IO_REG_DATA_1 0xd0 /* System Data Buffer 1 */
+#define IO_REG_DATA_2 0xe0 /* System Data Buffer 2 */
+#define IO_REG_DATA_3 0xf0 /* System Data Buffer 3 */
+
+ /* all systems */
+#define IO_REG_SSR 0x100 /* System Support Register */
+#define IO_REG_SIR 0x110 /* System Interrupt Register */
+#define IO_REG_SIMR 0x120 /* System Interrupt Mask Reg. */
+#define IO_REG_SAR 0x130 /* System Address Register */
+
+ /* Maxine */
+#define IO_REG_ISDN_T_DATA 0x140 /* ISDN Xmit Data Register */
+#define IO_REG_ISDN_R_DATA 0x150 /* ISDN Receive Data Register */
+
+ /* all systems */
+#define IO_REG_LANCE_SLOT 0x160 /* LANCE I/O Slot Register */
+#define IO_REG_SCSI_SLOT 0x170 /* SCSI Slot Register */
+#define IO_REG_SCC0A_SLOT 0x180 /* SCC0A DMA Slot Register */
+
+ /* except Maxine */
+#define IO_REG_SCC1A_SLOT 0x190 /* SCC1A DMA Slot Register */
+
+ /* Maxine */
+#define IO_REG_AB_SLOT 0x190 /* ACCESS.bus DMA Slot Register */
+#define IO_REG_FLOPPY_SLOT 0x1a0 /* Floppy Slot Register */
+
+ /* all systems */
+#define IO_REG_SCSI_SCR 0x1b0 /* SCSI Partial-Word DMA Control */
+#define IO_REG_SCSI_SDR0 0x1c0 /* SCSI DMA Partial Word 0 */
+#define IO_REG_SCSI_SDR1 0x1d0 /* SCSI DMA Partial Word 1 */
+#define IO_REG_FCTR 0x1e0 /* Free-Running Counter */
+#define IO_REG_RES_31 0x1f0 /* unused */
+
+
+/*
+ * The upper 16 bits of the System Support Register are a part of the
+ * I/O ASIC's internal DMA engine and thus are common to all I/O ASIC
+ * machines. The exception is the Maxine, which makes use of the
+ * FLOPPY and ISDN bits (otherwise unused) and has a different SCC
+ * wiring.
+ */
+ /* all systems */
+#define IO_SSR_SCC0A_TX_DMA_EN (1<<31) /* SCC0A transmit DMA enable */
+#define IO_SSR_SCC0A_RX_DMA_EN (1<<30) /* SCC0A receive DMA enable */
+#define IO_SSR_RES_27 (1<<27) /* unused */
+#define IO_SSR_RES_26 (1<<26) /* unused */
+#define IO_SSR_RES_25 (1<<25) /* unused */
+#define IO_SSR_RES_24 (1<<24) /* unused */
+#define IO_SSR_RES_23 (1<<23) /* unused */
+#define IO_SSR_SCSI_DMA_DIR (1<<18) /* SCSI DMA direction */
+#define IO_SSR_SCSI_DMA_EN (1<<17) /* SCSI DMA enable */
+#define IO_SSR_LANCE_DMA_EN (1<<16) /* LANCE DMA enable */
+
+ /* except Maxine */
+#define IO_SSR_SCC1A_TX_DMA_EN (1<<29) /* SCC1A transmit DMA enable */
+#define IO_SSR_SCC1A_RX_DMA_EN (1<<28) /* SCC1A receive DMA enable */
+#define IO_SSR_RES_22 (1<<22) /* unused */
+#define IO_SSR_RES_21 (1<<21) /* unused */
+#define IO_SSR_RES_20 (1<<20) /* unused */
+#define IO_SSR_RES_19 (1<<19) /* unused */
+
+ /* Maxine */
+#define IO_SSR_AB_TX_DMA_EN (1<<29) /* ACCESS.bus xmit DMA enable */
+#define IO_SSR_AB_RX_DMA_EN (1<<28) /* ACCESS.bus recv DMA enable */
+#define IO_SSR_FLOPPY_DMA_DIR (1<<22) /* Floppy DMA direction */
+#define IO_SSR_FLOPPY_DMA_EN (1<<21) /* Floppy DMA enable */
+#define IO_SSR_ISDN_TX_DMA_EN (1<<20) /* ISDN transmit DMA enable */
+#define IO_SSR_ISDN_RX_DMA_EN (1<<19) /* ISDN receive DMA enable */
+
+/*
+ * The lower 16 bits are system-specific. Bits 15,11:8 are common and
+ * defined here. The rest is defined in system-specific headers.
+ */
+#define KN0X_IO_SSR_DIAGDN (1<<15) /* diagnostic jumper */
+#define KN0X_IO_SSR_SCC_RST (1<<11) /* ~SCC0,1 (Z85C30) reset */
+#define KN0X_IO_SSR_RTC_RST (1<<10) /* ~RTC (DS1287) reset */
+#define KN0X_IO_SSR_ASC_RST (1<<9) /* ~ASC (NCR53C94) reset */
+#define KN0X_IO_SSR_LANCE_RST (1<<8) /* ~LANCE (Am7990) reset */
+
+#endif /* __ASM_MIPS_DEC_IOASIC_ADDRS_H */
diff --git a/arch/mips/include/asm/dec/ioasic_ints.h b/arch/mips/include/asm/dec/ioasic_ints.h
new file mode 100644
index 00000000000..9aaa9869615
--- /dev/null
+++ b/arch/mips/include/asm/dec/ioasic_ints.h
@@ -0,0 +1,74 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Definitions for the interrupt related bits in the I/O ASIC
+ * interrupt status register (and the interrupt mask register, of course)
+ *
+ * Created with Information from:
+ *
+ * "DEC 3000 300/400/500/600/700/800/900 AXP Models System Programmer's Manual"
+ *
+ * and the Mach Sources
+ *
+ * Copyright (C) 199x the Anonymous
+ * Copyright (C) 2002 Maciej W. Rozycki
+ */
+
+#ifndef __ASM_DEC_IOASIC_INTS_H
+#define __ASM_DEC_IOASIC_INTS_H
+
+/*
+ * The upper 16 bits are a part of the I/O ASIC's internal DMA engine
+ * and thus are common to all I/O ASIC machines. The exception is
+ * the Maxine, which makes use of the FLOPPY and ISDN bits (otherwise
+ * unused) and has a different SCC wiring.
+ */
+ /* all systems */
+#define IO_INR_SCC0A_TXDMA 31 /* SCC0A transmit page end */
+#define IO_INR_SCC0A_TXERR 30 /* SCC0A transmit memory read error */
+#define IO_INR_SCC0A_RXDMA 29 /* SCC0A receive half page */
+#define IO_INR_SCC0A_RXERR 28 /* SCC0A receive overrun */
+#define IO_INR_ASC_DMA 19 /* ASC buffer pointer loaded */
+#define IO_INR_ASC_ERR 18 /* ASC page overrun */
+#define IO_INR_ASC_MERR 17 /* ASC memory read error */
+#define IO_INR_LANCE_MERR 16 /* LANCE memory read error */
+
+ /* except Maxine */
+#define IO_INR_SCC1A_TXDMA 27 /* SCC1A transmit page end */
+#define IO_INR_SCC1A_TXERR 26 /* SCC1A transmit memory read error */
+#define IO_INR_SCC1A_RXDMA 25 /* SCC1A receive half page */
+#define IO_INR_SCC1A_RXERR 24 /* SCC1A receive overrun */
+#define IO_INR_RES_23 23 /* unused */
+#define IO_INR_RES_22 22 /* unused */
+#define IO_INR_RES_21 21 /* unused */
+#define IO_INR_RES_20 20 /* unused */
+
+ /* Maxine */
+#define IO_INR_AB_TXDMA 27 /* ACCESS.bus transmit page end */
+#define IO_INR_AB_TXERR 26 /* ACCESS.bus xmit memory read error */
+#define IO_INR_AB_RXDMA 25 /* ACCESS.bus receive half page */
+#define IO_INR_AB_RXERR 24 /* ACCESS.bus receive overrun */
+#define IO_INR_FLOPPY_ERR 23 /* FDC error */
+#define IO_INR_ISDN_TXDMA 22 /* ISDN xmit buffer pointer loaded */
+#define IO_INR_ISDN_RXDMA 21 /* ISDN recv buffer pointer loaded */
+#define IO_INR_ISDN_ERR 20 /* ISDN memory read/overrun error */
+
+#define IO_INR_DMA 16 /* first DMA IRQ */
+
+/*
+ * The lower 16 bits are system-specific and thus defined in
+ * system-specific headers.
+ */
+
+
+#define IO_IRQ_BASE 8 /* first IRQ assigned to I/O ASIC */
+#define IO_IRQ_LINES 32 /* number of I/O ASIC interrupts */
+
+#define IO_IRQ_NR(n) ((n) + IO_IRQ_BASE)
+#define IO_IRQ_MASK(n) (1 << (n))
+#define IO_IRQ_ALL 0x0000ffff
+#define IO_IRQ_DMA 0xffff0000
+
+#endif /* __ASM_DEC_IOASIC_INTS_H */
diff --git a/arch/mips/include/asm/dec/kn01.h b/arch/mips/include/asm/dec/kn01.h
new file mode 100644
index 00000000000..28fa717ac42
--- /dev/null
+++ b/arch/mips/include/asm/dec/kn01.h
@@ -0,0 +1,90 @@
+/*
+ * Hardware info about DECstation DS2100/3100 systems (otherwise known as
+ * pmin/pmax or KN01).
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
+ * are by courtesy of Chris Fraser.
+ * Copyright (C) 2002, 2003, 2005 Maciej W. Rozycki
+ */
+#ifndef __ASM_MIPS_DEC_KN01_H
+#define __ASM_MIPS_DEC_KN01_H
+
+#define KN01_SLOT_BASE 0x10000000
+#define KN01_SLOT_SIZE 0x01000000
+
+/*
+ * Address ranges for devices.
+ */
+#define KN01_PMASK (0*KN01_SLOT_SIZE) /* color plane mask */
+#define KN01_PCC (1*KN01_SLOT_SIZE) /* PCC (DC503) cursor */
+#define KN01_VDAC (2*KN01_SLOT_SIZE) /* color map */
+#define KN01_RES_3 (3*KN01_SLOT_SIZE) /* unused */
+#define KN01_RES_4 (4*KN01_SLOT_SIZE) /* unused */
+#define KN01_RES_5 (5*KN01_SLOT_SIZE) /* unused */
+#define KN01_RES_6 (6*KN01_SLOT_SIZE) /* unused */
+#define KN01_ERRADDR (7*KN01_SLOT_SIZE) /* write error address */
+#define KN01_LANCE (8*KN01_SLOT_SIZE) /* LANCE (Am7990) Ethernet */
+#define KN01_LANCE_MEM (9*KN01_SLOT_SIZE) /* LANCE buffer memory */
+#define KN01_SII (10*KN01_SLOT_SIZE) /* SII (DC7061) SCSI */
+#define KN01_SII_MEM (11*KN01_SLOT_SIZE) /* SII buffer memory */
+#define KN01_DZ11 (12*KN01_SLOT_SIZE) /* DZ11 (DC7085) serial */
+#define KN01_RTC (13*KN01_SLOT_SIZE) /* DS1287 RTC (bytes #0) */
+#define KN01_ESAR (13*KN01_SLOT_SIZE) /* MAC address (bytes #1) */
+#define KN01_CSR (14*KN01_SLOT_SIZE) /* system ctrl & status reg */
+#define KN01_SYS_ROM (15*KN01_SLOT_SIZE) /* system board ROM */
+
+
+/*
+ * Frame buffer memory address.
+ */
+#define KN01_VFB_MEM 0x0fc00000
+
+/*
+ * CPU interrupt bits.
+ */
+#define KN01_CPU_INR_BUS 6 /* memory, I/O bus read/write errors */
+#define KN01_CPU_INR_VIDEO 6 /* PCC area detect #2 */
+#define KN01_CPU_INR_RTC 5 /* DS1287 RTC */
+#define KN01_CPU_INR_DZ11 4 /* DZ11 (DC7085) serial */
+#define KN01_CPU_INR_LANCE 3 /* LANCE (Am7990) Ethernet */
+#define KN01_CPU_INR_SII 2 /* SII (DC7061) SCSI */
+
+
+/*
+ * System Control & Status Register bits.
+ */
+#define KN01_CSR_MNFMOD (1<<15) /* MNFMOD manufacturing jumper */
+#define KN01_CSR_STATUS (1<<14) /* self-test result status output */
+#define KN01_CSR_PARDIS (1<<13) /* parity error disable */
+#define KN01_CSR_CRSRTST (1<<12) /* PCC test output */
+#define KN01_CSR_MONO (1<<11) /* mono/color fb SIMM installed */
+#define KN01_CSR_MEMERR (1<<10) /* write timeout error status & ack*/
+#define KN01_CSR_VINT (1<<9) /* PCC area detect #2 status & ack */
+#define KN01_CSR_TXDIS (1<<8) /* DZ11 transmit disable */
+#define KN01_CSR_VBGTRG (1<<2) /* blue DAC voltage over green (r/o) */
+#define KN01_CSR_VRGTRG (1<<1) /* red DAC voltage over green (r/o) */
+#define KN01_CSR_VRGTRB (1<<0) /* red DAC voltage over blue (r/o) */
+#define KN01_CSR_LEDS (0xff<<0) /* ~diagnostic LEDs (w/o) */
+
+
+#ifndef __ASSEMBLY__
+
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+struct pt_regs;
+
+extern u16 cached_kn01_csr;
+extern spinlock_t kn01_lock;
+
+extern void dec_kn01_be_init(void);
+extern int dec_kn01_be_handler(struct pt_regs *regs, int is_fixup);
+extern irqreturn_t dec_kn01_be_interrupt(int irq, void *dev_id);
+#endif
+
+#endif /* __ASM_MIPS_DEC_KN01_H */
diff --git a/arch/mips/include/asm/dec/kn02.h b/arch/mips/include/asm/dec/kn02.h
new file mode 100644
index 00000000000..93430b5f472
--- /dev/null
+++ b/arch/mips/include/asm/dec/kn02.h
@@ -0,0 +1,91 @@
+/*
+ * Hardware info about DECstation 5000/200 systems (otherwise known as
+ * 3max or KN02).
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
+ * are by courtesy of Chris Fraser.
+ * Copyright (C) 2002, 2003, 2005 Maciej W. Rozycki
+ */
+#ifndef __ASM_MIPS_DEC_KN02_H
+#define __ASM_MIPS_DEC_KN02_H
+
+#define KN02_SLOT_BASE 0x1fc00000
+#define KN02_SLOT_SIZE 0x00080000
+
+/*
+ * Address ranges decoded by the "system slot" logic for onboard devices.
+ */
+#define KN02_SYS_ROM (0*KN02_SLOT_SIZE) /* system board ROM */
+#define KN02_RES_1 (1*KN02_SLOT_SIZE) /* unused */
+#define KN02_CHKSYN (2*KN02_SLOT_SIZE) /* ECC syndrome */
+#define KN02_ERRADDR (3*KN02_SLOT_SIZE) /* bus error address */
+#define KN02_DZ11 (4*KN02_SLOT_SIZE) /* DZ11 (DC7085) serial */
+#define KN02_RTC (5*KN02_SLOT_SIZE) /* DS1287 RTC */
+#define KN02_CSR (6*KN02_SLOT_SIZE) /* system ctrl & status reg */
+#define KN02_SYS_ROM_7 (7*KN02_SLOT_SIZE) /* system board ROM (alias) */
+
+
+/*
+ * System Control & Status Register bits.
+ */
+#define KN02_CSR_RES_28 (0xf<<28) /* unused */
+#define KN02_CSR_PSU (1<<27) /* power supply unit warning */
+#define KN02_CSR_NVRAM (1<<26) /* ~NVRAM clear jumper */
+#define KN02_CSR_REFEVEN (1<<25) /* mem refresh bank toggle */
+#define KN02_CSR_NRMOD (1<<24) /* ~NRMOD manufact. jumper */
+#define KN02_CSR_IOINTEN (0xff<<16) /* IRQ mask bits */
+#define KN02_CSR_DIAGCHK (1<<15) /* diagn/norml ECC reads */
+#define KN02_CSR_DIAGGEN (1<<14) /* diagn/norml ECC writes */
+#define KN02_CSR_CORRECT (1<<13) /* ECC correct/check */
+#define KN02_CSR_LEDIAG (1<<12) /* ECC diagn. latch strobe */
+#define KN02_CSR_TXDIS (1<<11) /* DZ11 transmit disable */
+#define KN02_CSR_BNK32M (1<<10) /* 32M/8M stride */
+#define KN02_CSR_DIAGDN (1<<9) /* DIAGDN manufact. jumper */
+#define KN02_CSR_BAUD38 (1<<8) /* DZ11 38/19kbps ext. rate */
+#define KN02_CSR_IOINT (0xff<<0) /* IRQ status bits (r/o) */
+#define KN02_CSR_LEDS (0xff<<0) /* ~diagnostic LEDs (w/o) */
+
+
+/*
+ * CPU interrupt bits.
+ */
+#define KN02_CPU_INR_RES_6 6 /* unused */
+#define KN02_CPU_INR_BUS 5 /* memory, I/O bus read/write errors */
+#define KN02_CPU_INR_RES_4 4 /* unused */
+#define KN02_CPU_INR_RTC 3 /* DS1287 RTC */
+#define KN02_CPU_INR_CASCADE 2 /* CSR cascade */
+
+/*
+ * CSR interrupt bits.
+ */
+#define KN02_CSR_INR_DZ11 7 /* DZ11 (DC7085) serial */
+#define KN02_CSR_INR_LANCE 6 /* LANCE (Am7990) Ethernet */
+#define KN02_CSR_INR_ASC 5 /* ASC (NCR53C94) SCSI */
+#define KN02_CSR_INR_RES_4 4 /* unused */
+#define KN02_CSR_INR_RES_3 3 /* unused */
+#define KN02_CSR_INR_TC2 2 /* TURBOchannel slot #2 */
+#define KN02_CSR_INR_TC1 1 /* TURBOchannel slot #1 */
+#define KN02_CSR_INR_TC0 0 /* TURBOchannel slot #0 */
+
+
+#define KN02_IRQ_BASE 8 /* first IRQ assigned to CSR */
+#define KN02_IRQ_LINES 8 /* number of CSR interrupts */
+
+#define KN02_IRQ_NR(n) ((n) + KN02_IRQ_BASE)
+#define KN02_IRQ_MASK(n) (1 << (n))
+#define KN02_IRQ_ALL 0xff
+
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+extern u32 cached_kn02_csr;
+extern void init_kn02_irqs(int base);
+#endif
+
+#endif /* __ASM_MIPS_DEC_KN02_H */
diff --git a/arch/mips/include/asm/dec/kn02ba.h b/arch/mips/include/asm/dec/kn02ba.h
new file mode 100644
index 00000000000..c957a4f1b32
--- /dev/null
+++ b/arch/mips/include/asm/dec/kn02ba.h
@@ -0,0 +1,67 @@
+/*
+ * include/asm-mips/dec/kn02ba.h
+ *
+ * DECstation 5000/1xx (3min or KN02-BA) definitions.
+ *
+ * Copyright (C) 2002, 2003 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MIPS_DEC_KN02BA_H
+#define __ASM_MIPS_DEC_KN02BA_H
+
+#include <asm/dec/kn02xa.h> /* For common definitions. */
+
+/*
+ * CPU interrupt bits.
+ */
+#define KN02BA_CPU_INR_HALT 6 /* HALT button */
+#define KN02BA_CPU_INR_CASCADE 5 /* I/O ASIC cascade */
+#define KN02BA_CPU_INR_TC2 4 /* TURBOchannel slot #2 */
+#define KN02BA_CPU_INR_TC1 3 /* TURBOchannel slot #1 */
+#define KN02BA_CPU_INR_TC0 2 /* TURBOchannel slot #0 */
+
+/*
+ * I/O ASIC interrupt bits. Star marks denote non-IRQ status bits.
+ */
+#define KN02BA_IO_INR_RES_15 15 /* unused */
+#define KN02BA_IO_INR_NVRAM 14 /* (*) NVRAM clear jumper */
+#define KN02BA_IO_INR_RES_13 13 /* unused */
+#define KN02BA_IO_INR_BUS 12 /* memory, I/O bus read/write errors */
+#define KN02BA_IO_INR_RES_11 11 /* unused */
+#define KN02BA_IO_INR_NRMOD 10 /* (*) NRMOD manufacturing jumper */
+#define KN02BA_IO_INR_ASC 9 /* ASC (NCR53C94) SCSI */
+#define KN02BA_IO_INR_LANCE 8 /* LANCE (Am7990) Ethernet */
+#define KN02BA_IO_INR_SCC1 7 /* SCC (Z85C30) serial #1 */
+#define KN02BA_IO_INR_SCC0 6 /* SCC (Z85C30) serial #0 */
+#define KN02BA_IO_INR_RTC 5 /* DS1287 RTC */
+#define KN02BA_IO_INR_PSU 4 /* power supply unit warning */
+#define KN02BA_IO_INR_RES_3 3 /* unused */
+#define KN02BA_IO_INR_ASC_DATA 2 /* SCSI data ready (for PIO) */
+#define KN02BA_IO_INR_PBNC 1 /* ~HALT button debouncer */
+#define KN02BA_IO_INR_PBNO 0 /* HALT button debouncer */
+
+
+/*
+ * Memory Error Register bits.
+ */
+#define KN02BA_MER_RES_27 (1<<27) /* unused */
+
+/*
+ * Memory Size Register bits.
+ */
+#define KN02BA_MSR_RES_17 (0x3ff<<17) /* unused */
+
+/*
+ * I/O ASIC System Support Register bits.
+ */
+#define KN02BA_IO_SSR_TXDIS1 (1<<14) /* SCC1 transmit disable */
+#define KN02BA_IO_SSR_TXDIS0 (1<<13) /* SCC0 transmit disable */
+#define KN02BA_IO_SSR_RES_12 (1<<12) /* unused */
+
+#define KN02BA_IO_SSR_LEDS (0xff<<0) /* ~diagnostic LEDs */
+
+#endif /* __ASM_MIPS_DEC_KN02BA_H */
diff --git a/arch/mips/include/asm/dec/kn02ca.h b/arch/mips/include/asm/dec/kn02ca.h
new file mode 100644
index 00000000000..92c0fe25609
--- /dev/null
+++ b/arch/mips/include/asm/dec/kn02ca.h
@@ -0,0 +1,79 @@
+/*
+ * include/asm-mips/dec/kn02ca.h
+ *
+ * Personal DECstation 5000/xx (Maxine or KN02-CA) definitions.
+ *
+ * Copyright (C) 2002, 2003 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MIPS_DEC_KN02CA_H
+#define __ASM_MIPS_DEC_KN02CA_H
+
+#include <asm/dec/kn02xa.h> /* For common definitions. */
+
+/*
+ * CPU interrupt bits.
+ */
+#define KN02CA_CPU_INR_HALT 6 /* HALT from ACCESS.Bus */
+#define KN02CA_CPU_INR_CASCADE 5 /* I/O ASIC cascade */
+#define KN02CA_CPU_INR_BUS 4 /* memory, I/O bus read/write errors */
+#define KN02CA_CPU_INR_RTC 3 /* DS1287 RTC */
+#define KN02CA_CPU_INR_TIMER 2 /* ARC periodic timer */
+
+/*
+ * I/O ASIC interrupt bits. Star marks denote non-IRQ status bits.
+ */
+#define KN02CA_IO_INR_FLOPPY 15 /* 82077 FDC */
+#define KN02CA_IO_INR_NVRAM 14 /* (*) NVRAM clear jumper */
+#define KN02CA_IO_INR_POWERON 13 /* (*) ACCESS.Bus/power-on reset */
+#define KN02CA_IO_INR_TC0 12 /* TURBOchannel slot #0 */
+#define KN02CA_IO_INR_TIMER 12 /* ARC periodic timer (?) */
+#define KN02CA_IO_INR_ISDN 11 /* Am79C30A ISDN */
+#define KN02CA_IO_INR_NRMOD 10 /* (*) NRMOD manufacturing jumper */
+#define KN02CA_IO_INR_ASC 9 /* ASC (NCR53C94) SCSI */
+#define KN02CA_IO_INR_LANCE 8 /* LANCE (Am7990) Ethernet */
+#define KN02CA_IO_INR_HDFLOPPY 7 /* (*) HD (1.44MB) floppy status */
+#define KN02CA_IO_INR_SCC0 6 /* SCC (Z85C30) serial #0 */
+#define KN02CA_IO_INR_TC1 5 /* TURBOchannel slot #1 */
+#define KN02CA_IO_INR_XDFLOPPY 4 /* (*) XD (2.88MB) floppy status */
+#define KN02CA_IO_INR_VIDEO 3 /* framebuffer */
+#define KN02CA_IO_INR_XVIDEO 2 /* ~framebuffer */
+#define KN02CA_IO_INR_AB_XMIT 1 /* ACCESS.bus transmit */
+#define KN02CA_IO_INR_AB_RECV 0 /* ACCESS.bus receive */
+
+
+/*
+ * Memory Error Register bits.
+ */
+#define KN02CA_MER_INTR (1<<27) /* ARC IRQ status & ack */
+
+/*
+ * Memory Size Register bits.
+ */
+#define KN02CA_MSR_INTREN (1<<26) /* ARC periodic IRQ enable */
+#define KN02CA_MSR_MS10EN (1<<25) /* 10/1ms IRQ period select */
+#define KN02CA_MSR_PFORCE (0xf<<21) /* byte lane error force */
+#define KN02CA_MSR_MABEN (1<<20) /* A side VFB address enable */
+#define KN02CA_MSR_LASTBANK (0x7<<17) /* onboard RAM bank # */
+
+/*
+ * I/O ASIC System Support Register bits.
+ */
+#define KN03CA_IO_SSR_RES_14 (1<<14) /* unused */
+#define KN03CA_IO_SSR_RES_13 (1<<13) /* unused */
+#define KN03CA_IO_SSR_ISDN_RST (1<<12) /* ~ISDN (Am79C30A) reset */
+
+#define KN03CA_IO_SSR_FLOPPY_RST (1<<7) /* ~FDC (82077) reset */
+#define KN03CA_IO_SSR_VIDEO_RST (1<<6) /* ~framebuffer reset */
+#define KN03CA_IO_SSR_AB_RST (1<<5) /* ACCESS.bus reset */
+#define KN03CA_IO_SSR_RES_4 (1<<4) /* unused */
+#define KN03CA_IO_SSR_RES_3 (1<<4) /* unused */
+#define KN03CA_IO_SSR_RES_2 (1<<2) /* unused */
+#define KN03CA_IO_SSR_RES_1 (1<<1) /* unused */
+#define KN03CA_IO_SSR_LED (1<<0) /* power LED */
+
+#endif /* __ASM_MIPS_DEC_KN02CA_H */
diff --git a/arch/mips/include/asm/dec/kn02xa.h b/arch/mips/include/asm/dec/kn02xa.h
new file mode 100644
index 00000000000..b56b4577f6e
--- /dev/null
+++ b/arch/mips/include/asm/dec/kn02xa.h
@@ -0,0 +1,84 @@
+/*
+ * Hardware info common to DECstation 5000/1xx systems (otherwise
+ * known as 3min or kn02ba) and Personal DECstations 5000/xx ones
+ * (otherwise known as maxine or kn02ca).
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
+ * are by courtesy of Chris Fraser.
+ * Copyright (C) 2000, 2002, 2003, 2005 Maciej W. Rozycki
+ *
+ * These are addresses which have to be known early in the boot process.
+ * For other addresses refer to tc.h, ioasic_addrs.h and friends.
+ */
+#ifndef __ASM_MIPS_DEC_KN02XA_H
+#define __ASM_MIPS_DEC_KN02XA_H
+
+#include <asm/dec/ioasic_addrs.h>
+
+#define KN02XA_SLOT_BASE 0x1c000000
+
+/*
+ * Memory control ASIC registers.
+ */
+#define KN02XA_MER 0x0c400000 /* memory error register */
+#define KN02XA_MSR 0x0c800000 /* memory size register */
+
+/*
+ * CPU control ASIC registers.
+ */
+#define KN02XA_MEM_CONF 0x0e000000 /* write timeout config */
+#define KN02XA_EAR 0x0e000004 /* error address register */
+#define KN02XA_BOOT0 0x0e000008 /* boot 0 register */
+#define KN02XA_MEM_INTR 0x0e00000c /* write err IRQ stat & ack */
+
+/*
+ * Memory Error Register bits, common definitions.
+ * The rest is defined in system-specific headers.
+ */
+#define KN02XA_MER_RES_28 (0xf<<28) /* unused */
+#define KN02XA_MER_RES_17 (0x3ff<<17) /* unused */
+#define KN02XA_MER_PAGERR (1<<16) /* 2k page boundary error */
+#define KN02XA_MER_TRANSERR (1<<15) /* transfer length error */
+#define KN02XA_MER_PARDIS (1<<14) /* parity error disable */
+#define KN02XA_MER_SIZE (1<<13) /* r/o mirror of MSR_SIZE */
+#define KN02XA_MER_RES_12 (1<<12) /* unused */
+#define KN02XA_MER_BYTERR (0xf<<8) /* byte lane error bitmask: */
+#define KN02XA_MER_BYTERR_3 (0x8<<8) /* byte lane #3 */
+#define KN02XA_MER_BYTERR_2 (0x4<<8) /* byte lane #2 */
+#define KN02XA_MER_BYTERR_1 (0x2<<8) /* byte lane #1 */
+#define KN02XA_MER_BYTERR_0 (0x1<<8) /* byte lane #0 */
+#define KN02XA_MER_RES_0 (0xff<<0) /* unused */
+
+/*
+ * Memory Size Register bits, common definitions.
+ * The rest is defined in system-specific headers.
+ */
+#define KN02XA_MSR_RES_27 (0x1f<<27) /* unused */
+#define KN02XA_MSR_RES_14 (0x7<<14) /* unused */
+#define KN02XA_MSR_SIZE (1<<13) /* 16M/4M stride */
+#define KN02XA_MSR_RES_0 (0x1fff<<0) /* unused */
+
+/*
+ * Error Address Register bits.
+ */
+#define KN02XA_EAR_RES_29 (0x7<<29) /* unused */
+#define KN02XA_EAR_ADDRESS (0x7ffffff<<2) /* address involved */
+#define KN02XA_EAR_RES_0 (0x3<<0) /* unused */
+
+
+#ifndef __ASSEMBLY__
+
+#include <linux/interrupt.h>
+
+struct pt_regs;
+
+extern void dec_kn02xa_be_init(void);
+extern int dec_kn02xa_be_handler(struct pt_regs *regs, int is_fixup);
+extern irqreturn_t dec_kn02xa_be_interrupt(int irq, void *dev_id);
+#endif
+
+#endif /* __ASM_MIPS_DEC_KN02XA_H */
diff --git a/arch/mips/include/asm/dec/kn03.h b/arch/mips/include/asm/dec/kn03.h
new file mode 100644
index 00000000000..edede923ffb
--- /dev/null
+++ b/arch/mips/include/asm/dec/kn03.h
@@ -0,0 +1,74 @@
+/*
+ * Hardware info about DECstation 5000/2x0 systems (otherwise known as
+ * 3max+) and DECsystem 5900 systems (otherwise known as bigmax) which
+ * differ mechanically but are otherwise identical (both are known as
+ * KN03).
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
+ * are by courtesy of Chris Fraser.
+ * Copyright (C) 2000, 2002, 2003, 2005 Maciej W. Rozycki
+ */
+#ifndef __ASM_MIPS_DEC_KN03_H
+#define __ASM_MIPS_DEC_KN03_H
+
+#include <asm/dec/ecc.h>
+#include <asm/dec/ioasic_addrs.h>
+
+#define KN03_SLOT_BASE 0x1f800000
+
+/*
+ * CPU interrupt bits.
+ */
+#define KN03_CPU_INR_HALT 6 /* HALT button */
+#define KN03_CPU_INR_BUS 5 /* memory, I/O bus read/write errors */
+#define KN03_CPU_INR_RES_4 4 /* unused */
+#define KN03_CPU_INR_RTC 3 /* DS1287 RTC */
+#define KN03_CPU_INR_CASCADE 2 /* I/O ASIC cascade */
+
+/*
+ * I/O ASIC interrupt bits. Star marks denote non-IRQ status bits.
+ */
+#define KN03_IO_INR_3MAXP 15 /* (*) 3max+/bigmax ID */
+#define KN03_IO_INR_NVRAM 14 /* (*) NVRAM clear jumper */
+#define KN03_IO_INR_TC2 13 /* TURBOchannel slot #2 */
+#define KN03_IO_INR_TC1 12 /* TURBOchannel slot #1 */
+#define KN03_IO_INR_TC0 11 /* TURBOchannel slot #0 */
+#define KN03_IO_INR_NRMOD 10 /* (*) NRMOD manufacturing jumper */
+#define KN03_IO_INR_ASC 9 /* ASC (NCR53C94) SCSI */
+#define KN03_IO_INR_LANCE 8 /* LANCE (Am7990) Ethernet */
+#define KN03_IO_INR_SCC1 7 /* SCC (Z85C30) serial #1 */
+#define KN03_IO_INR_SCC0 6 /* SCC (Z85C30) serial #0 */
+#define KN03_IO_INR_RTC 5 /* DS1287 RTC */
+#define KN03_IO_INR_PSU 4 /* power supply unit warning */
+#define KN03_IO_INR_RES_3 3 /* unused */
+#define KN03_IO_INR_ASC_DATA 2 /* SCSI data ready (for PIO) */
+#define KN03_IO_INR_PBNC 1 /* ~HALT button debouncer */
+#define KN03_IO_INR_PBNO 0 /* HALT button debouncer */
+
+
+/*
+ * Memory Control Register bits.
+ */
+#define KN03_MCR_RES_16 (0xffff<<16) /* unused */
+#define KN03_MCR_DIAGCHK (1<<15) /* diagn/norml ECC reads */
+#define KN03_MCR_DIAGGEN (1<<14) /* diagn/norml ECC writes */
+#define KN03_MCR_CORRECT (1<<13) /* ECC correct/check */
+#define KN03_MCR_RES_11 (0x3<<12) /* unused */
+#define KN03_MCR_BNK32M (1<<10) /* 32M/8M stride */
+#define KN03_MCR_RES_7 (0x7<<7) /* unused */
+#define KN03_MCR_CHECK (0x7f<<0) /* diagnostic check bits */
+
+/*
+ * I/O ASIC System Support Register bits.
+ */
+#define KN03_IO_SSR_TXDIS1 (1<<14) /* SCC1 transmit disable */
+#define KN03_IO_SSR_TXDIS0 (1<<13) /* SCC0 transmit disable */
+#define KN03_IO_SSR_RES_12 (1<<12) /* unused */
+
+#define KN03_IO_SSR_LEDS (0xff<<0) /* ~diagnostic LEDs */
+
+#endif /* __ASM_MIPS_DEC_KN03_H */
diff --git a/arch/mips/include/asm/dec/kn05.h b/arch/mips/include/asm/dec/kn05.h
new file mode 100644
index 00000000000..56d22dc8803
--- /dev/null
+++ b/arch/mips/include/asm/dec/kn05.h
@@ -0,0 +1,76 @@
+/*
+ * include/asm-mips/dec/kn05.h
+ *
+ * DECstation/DECsystem 5000/260 (4max+ or KN05), 5000/150 (4min
+ * or KN04-BA), Personal DECstation/DECsystem 5000/50 (4maxine or
+ * KN04-CA) and DECsystem 5900/260 (KN05) R4k CPU card MB ASIC
+ * definitions.
+ *
+ * Copyright (C) 2002, 2003, 2005, 2008 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * WARNING! All this information is pure guesswork based on the
+ * ROM. It is provided here in hope it will give someone some
+ * food for thought. No documentation for the KN05 nor the KN04
+ * module has been located so far.
+ */
+#ifndef __ASM_MIPS_DEC_KN05_H
+#define __ASM_MIPS_DEC_KN05_H
+
+#include <asm/dec/ioasic_addrs.h>
+
+/*
+ * The oncard MB (Memory Buffer) ASIC provides an additional address
+ * decoder. Certain address ranges within the "high" 16 slots are
+ * passed to the I/O ASIC's decoder like with the KN03 or KN02-BA/CA.
+ * Others are handled locally. "Low" slots are always passed.
+ */
+#define KN4K_SLOT_BASE 0x1fc00000
+
+#define KN4K_MB_ROM (0*IOASIC_SLOT_SIZE) /* KN05/KN04 card ROM */
+#define KN4K_IOCTL (1*IOASIC_SLOT_SIZE) /* I/O ASIC */
+#define KN4K_ESAR (2*IOASIC_SLOT_SIZE) /* LANCE MAC address chip */
+#define KN4K_LANCE (3*IOASIC_SLOT_SIZE) /* LANCE Ethernet */
+#define KN4K_MB_INT (4*IOASIC_SLOT_SIZE) /* MB interrupt register */
+#define KN4K_MB_EA (5*IOASIC_SLOT_SIZE) /* MB error address? */
+#define KN4K_MB_EC (6*IOASIC_SLOT_SIZE) /* MB error ??? */
+#define KN4K_MB_CSR (7*IOASIC_SLOT_SIZE) /* MB control & status */
+#define KN4K_RES_08 (8*IOASIC_SLOT_SIZE) /* unused? */
+#define KN4K_RES_09 (9*IOASIC_SLOT_SIZE) /* unused? */
+#define KN4K_RES_10 (10*IOASIC_SLOT_SIZE) /* unused? */
+#define KN4K_RES_11 (11*IOASIC_SLOT_SIZE) /* unused? */
+#define KN4K_SCSI (12*IOASIC_SLOT_SIZE) /* ASC SCSI */
+#define KN4K_RES_13 (13*IOASIC_SLOT_SIZE) /* unused? */
+#define KN4K_RES_14 (14*IOASIC_SLOT_SIZE) /* unused? */
+#define KN4K_RES_15 (15*IOASIC_SLOT_SIZE) /* unused? */
+
+/*
+ * Bits for the MB interrupt register.
+ * The register appears read-only.
+ */
+#define KN4K_MB_INT_TC (1<<0) /* TURBOchannel? */
+#define KN4K_MB_INT_RTC (1<<1) /* RTC? */
+#define KN4K_MB_INT_MT (1<<3) /* I/O ASIC cascade */
+
+/*
+ * Bits for the MB control & status register.
+ * Set to 0x00bf8001 for KN05 and to 0x003f8000 for KN04 by the firmware.
+ */
+#define KN4K_MB_CSR_PF (1<<0) /* PreFetching enable? */
+#define KN4K_MB_CSR_F (1<<1) /* ??? */
+#define KN4K_MB_CSR_ECC (0xff<<2) /* ??? */
+#define KN4K_MB_CSR_OD (1<<10) /* ??? */
+#define KN4K_MB_CSR_CP (1<<11) /* ??? */
+#define KN4K_MB_CSR_UNC (1<<12) /* ??? */
+#define KN4K_MB_CSR_IM (1<<13) /* ??? */
+#define KN4K_MB_CSR_NC (1<<14) /* ??? */
+#define KN4K_MB_CSR_EE (1<<15) /* (bus) Exception Enable? */
+#define KN4K_MB_CSR_MSK (0x1f<<16) /* CPU Int[4:0] mask */
+#define KN4K_MB_CSR_FW (1<<21) /* ??? */
+#define KN4K_MB_CSR_W (1<<31) /* ??? */
+
+#endif /* __ASM_MIPS_DEC_KN05_H */
diff --git a/arch/mips/include/asm/dec/kn230.h b/arch/mips/include/asm/dec/kn230.h
new file mode 100644
index 00000000000..ff1bf17de8d
--- /dev/null
+++ b/arch/mips/include/asm/dec/kn230.h
@@ -0,0 +1,26 @@
+/*
+ * include/asm-mips/dec/kn230.h
+ *
+ * DECsystem 5100 (MIPSmate or KN230) definitions.
+ *
+ * Copyright (C) 2002, 2003 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MIPS_DEC_KN230_H
+#define __ASM_MIPS_DEC_KN230_H
+
+/*
+ * CPU interrupt bits.
+ */
+#define KN230_CPU_INR_HALT 6 /* HALT button */
+#define KN230_CPU_INR_BUS 5 /* memory, I/O bus read/write errors */
+#define KN230_CPU_INR_RTC 4 /* DS1287 RTC */
+#define KN230_CPU_INR_SII 3 /* SII (DC7061) SCSI */
+#define KN230_CPU_INR_LANCE 3 /* LANCE (Am7990) Ethernet */
+#define KN230_CPU_INR_DZ11 2 /* DZ11 (DC7085) serial */
+
+#endif /* __ASM_MIPS_DEC_KN230_H */
diff --git a/arch/mips/include/asm/dec/machtype.h b/arch/mips/include/asm/dec/machtype.h
new file mode 100644
index 00000000000..a6ecdebc430
--- /dev/null
+++ b/arch/mips/include/asm/dec/machtype.h
@@ -0,0 +1,27 @@
+/*
+ * Various machine type macros
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1998, 2000 Harald Koerfgen
+ */
+
+#ifndef __ASM_DEC_MACHTYPE_H
+#define __ASM_DEC_MACHTYPE_H
+
+#include <asm/bootinfo.h>
+
+#define TURBOCHANNEL (mips_machtype == MACH_DS5000_200 || \
+ mips_machtype == MACH_DS5000_1XX || \
+ mips_machtype == MACH_DS5000_XX || \
+ mips_machtype == MACH_DS5000_2X0 || \
+ mips_machtype == MACH_DS5900)
+
+#define IOASIC (mips_machtype == MACH_DS5000_1XX || \
+ mips_machtype == MACH_DS5000_XX || \
+ mips_machtype == MACH_DS5000_2X0 || \
+ mips_machtype == MACH_DS5900)
+
+#endif
diff --git a/arch/mips/include/asm/dec/prom.h b/arch/mips/include/asm/dec/prom.h
new file mode 100644
index 00000000000..b9c8203688d
--- /dev/null
+++ b/arch/mips/include/asm/dec/prom.h
@@ -0,0 +1,174 @@
+/*
+ * include/asm-mips/dec/prom.h
+ *
+ * DECstation PROM interface.
+ *
+ * Copyright (C) 2002 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Based on arch/mips/dec/prom/prom.h by the Anonymous.
+ */
+#ifndef _ASM_DEC_PROM_H
+#define _ASM_DEC_PROM_H
+
+#include <linux/types.h>
+
+#include <asm/addrspace.h>
+
+/*
+ * PMAX/3MAX PROM entry points for DS2100/3100's and DS5000/2xx's.
+ * Many of these will work for MIPSen as well!
+ */
+#define VEC_RESET (u64 *)CKSEG1ADDR(0x1fc00000)
+ /* Prom base address */
+
+#define PMAX_PROM_ENTRY(x) (VEC_RESET + (x)) /* Prom jump table */
+
+#define PMAX_PROM_HALT PMAX_PROM_ENTRY(2) /* valid on MIPSen */
+#define PMAX_PROM_AUTOBOOT PMAX_PROM_ENTRY(5) /* valid on MIPSen */
+#define PMAX_PROM_OPEN PMAX_PROM_ENTRY(6)
+#define PMAX_PROM_READ PMAX_PROM_ENTRY(7)
+#define PMAX_PROM_CLOSE PMAX_PROM_ENTRY(10)
+#define PMAX_PROM_LSEEK PMAX_PROM_ENTRY(11)
+#define PMAX_PROM_GETCHAR PMAX_PROM_ENTRY(12)
+#define PMAX_PROM_PUTCHAR PMAX_PROM_ENTRY(13) /* 12 on MIPSen */
+#define PMAX_PROM_GETS PMAX_PROM_ENTRY(15)
+#define PMAX_PROM_PRINTF PMAX_PROM_ENTRY(17)
+#define PMAX_PROM_GETENV PMAX_PROM_ENTRY(33) /* valid on MIPSen */
+
+
+/*
+ * Magic number indicating REX PROM available on DECstation. Found in
+ * register a2 on transfer of control to program from PROM.
+ */
+#define REX_PROM_MAGIC 0x30464354
+
+#ifdef CONFIG_64BIT
+
+#define prom_is_rex(magic) 1 /* KN04 and KN05 are REX PROMs. */
+
+#else /* !CONFIG_64BIT */
+
+#define prom_is_rex(magic) ((magic) == REX_PROM_MAGIC)
+
+#endif /* !CONFIG_64BIT */
+
+
+/*
+ * 3MIN/MAXINE PROM entry points for DS5000/1xx's, DS5000/xx's and
+ * DS5000/2x0.
+ */
+#define REX_PROM_GETBITMAP 0x84/4 /* get mem bitmap */
+#define REX_PROM_GETCHAR 0x24/4 /* getch() */
+#define REX_PROM_GETENV 0x64/4 /* get env. variable */
+#define REX_PROM_GETSYSID 0x80/4 /* get system id */
+#define REX_PROM_GETTCINFO 0xa4/4
+#define REX_PROM_PRINTF 0x30/4 /* printf() */
+#define REX_PROM_SLOTADDR 0x6c/4 /* slotaddr */
+#define REX_PROM_BOOTINIT 0x54/4 /* open() */
+#define REX_PROM_BOOTREAD 0x58/4 /* read() */
+#define REX_PROM_CLEARCACHE 0x7c/4
+
+
+/*
+ * Used by rex_getbitmap().
+ */
+typedef struct {
+ int pagesize;
+ unsigned char bitmap[0];
+} memmap;
+
+
+/*
+ * Function pointers as read from a PROM's callback vector.
+ */
+extern int (*__rex_bootinit)(void);
+extern int (*__rex_bootread)(void);
+extern int (*__rex_getbitmap)(memmap *);
+extern unsigned long *(*__rex_slot_address)(int);
+extern void *(*__rex_gettcinfo)(void);
+extern int (*__rex_getsysid)(void);
+extern void (*__rex_clear_cache)(void);
+
+extern int (*__prom_getchar)(void);
+extern char *(*__prom_getenv)(char *);
+extern int (*__prom_printf)(char *, ...);
+
+extern int (*__pmax_open)(char*, int);
+extern int (*__pmax_lseek)(int, long, int);
+extern int (*__pmax_read)(int, void *, int);
+extern int (*__pmax_close)(int);
+
+
+#ifdef CONFIG_64BIT
+
+/*
+ * On MIPS64 we have to call PROM functions via a helper
+ * dispatcher to accomodate ABI incompatibilities.
+ */
+#define __DEC_PROM_O32(fun, arg) fun arg __asm__(#fun); \
+ __asm__(#fun " = call_o32")
+
+int __DEC_PROM_O32(_rex_bootinit, (int (*)(void)));
+int __DEC_PROM_O32(_rex_bootread, (int (*)(void)));
+int __DEC_PROM_O32(_rex_getbitmap, (int (*)(memmap *), memmap *));
+unsigned long *__DEC_PROM_O32(_rex_slot_address,
+ (unsigned long *(*)(int), int));
+void *__DEC_PROM_O32(_rex_gettcinfo, (void *(*)(void)));
+int __DEC_PROM_O32(_rex_getsysid, (int (*)(void)));
+void __DEC_PROM_O32(_rex_clear_cache, (void (*)(void)));
+
+int __DEC_PROM_O32(_prom_getchar, (int (*)(void)));
+char *__DEC_PROM_O32(_prom_getenv, (char *(*)(char *), char *));
+int __DEC_PROM_O32(_prom_printf, (int (*)(char *, ...), char *, ...));
+
+
+#define rex_bootinit() _rex_bootinit(__rex_bootinit)
+#define rex_bootread() _rex_bootread(__rex_bootread)
+#define rex_getbitmap(x) _rex_getbitmap(__rex_getbitmap, x)
+#define rex_slot_address(x) _rex_slot_address(__rex_slot_address, x)
+#define rex_gettcinfo() _rex_gettcinfo(__rex_gettcinfo)
+#define rex_getsysid() _rex_getsysid(__rex_getsysid)
+#define rex_clear_cache() _rex_clear_cache(__rex_clear_cache)
+
+#define prom_getchar() _prom_getchar(__prom_getchar)
+#define prom_getenv(x) _prom_getenv(__prom_getenv, x)
+#define prom_printf(x...) _prom_printf(__prom_printf, x)
+
+#else /* !CONFIG_64BIT */
+
+/*
+ * On plain MIPS we just call PROM functions directly.
+ */
+#define rex_bootinit __rex_bootinit
+#define rex_bootread __rex_bootread
+#define rex_getbitmap __rex_getbitmap
+#define rex_slot_address __rex_slot_address
+#define rex_gettcinfo __rex_gettcinfo
+#define rex_getsysid __rex_getsysid
+#define rex_clear_cache __rex_clear_cache
+
+#define prom_getchar __prom_getchar
+#define prom_getenv __prom_getenv
+#define prom_printf __prom_printf
+
+#define pmax_open __pmax_open
+#define pmax_lseek __pmax_lseek
+#define pmax_read __pmax_read
+#define pmax_close __pmax_close
+
+#endif /* !CONFIG_64BIT */
+
+
+extern void prom_meminit(u32);
+extern void prom_identify_arch(u32);
+extern void prom_init_cmdline(s32, s32 *, u32);
+
+extern void register_prom_console(void);
+extern void unregister_prom_console(void);
+
+#endif /* _ASM_DEC_PROM_H */
diff --git a/arch/mips/include/asm/dec/system.h b/arch/mips/include/asm/dec/system.h
new file mode 100644
index 00000000000..b2afaccd683
--- /dev/null
+++ b/arch/mips/include/asm/dec/system.h
@@ -0,0 +1,19 @@
+/*
+ * include/asm-mips/dec/system.h
+ *
+ * Generic DECstation/DECsystem bits.
+ *
+ * Copyright (C) 2005, 2006 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_DEC_SYSTEM_H
+#define __ASM_DEC_SYSTEM_H
+
+extern unsigned long dec_kn_slot_base, dec_kn_slot_size;
+extern int dec_tc_bus;
+
+#endif /* __ASM_DEC_SYSTEM_H */
diff --git a/arch/mips/include/asm/delay.h b/arch/mips/include/asm/delay.h
new file mode 100644
index 00000000000..b0bccd2c4ed
--- /dev/null
+++ b/arch/mips/include/asm/delay.h
@@ -0,0 +1,112 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 by Waldorf Electronics
+ * Copyright (C) 1995 - 2000, 01, 03 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2007 Maciej W. Rozycki
+ */
+#ifndef _ASM_DELAY_H
+#define _ASM_DELAY_H
+
+#include <linux/param.h>
+#include <linux/smp.h>
+
+#include <asm/compiler.h>
+#include <asm/war.h>
+
+static inline void __delay(unsigned long loops)
+{
+ if (sizeof(long) == 4)
+ __asm__ __volatile__ (
+ " .set noreorder \n"
+ " .align 3 \n"
+ "1: bnez %0, 1b \n"
+ " subu %0, 1 \n"
+ " .set reorder \n"
+ : "=r" (loops)
+ : "0" (loops));
+ else if (sizeof(long) == 8 && !DADDI_WAR)
+ __asm__ __volatile__ (
+ " .set noreorder \n"
+ " .align 3 \n"
+ "1: bnez %0, 1b \n"
+ " dsubu %0, 1 \n"
+ " .set reorder \n"
+ : "=r" (loops)
+ : "0" (loops));
+ else if (sizeof(long) == 8 && DADDI_WAR)
+ __asm__ __volatile__ (
+ " .set noreorder \n"
+ " .align 3 \n"
+ "1: bnez %0, 1b \n"
+ " dsubu %0, %2 \n"
+ " .set reorder \n"
+ : "=r" (loops)
+ : "0" (loops), "r" (1));
+}
+
+
+/*
+ * Division by multiplication: you don't have to worry about
+ * loss of precision.
+ *
+ * Use only for very small delays ( < 1 msec). Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays. This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)
+ */
+
+static inline void __udelay(unsigned long usecs, unsigned long lpj)
+{
+ unsigned long hi, lo;
+
+ /*
+ * The rates of 128 is rounded wrongly by the catchall case
+ * for 64-bit. Excessive precission? Probably ...
+ */
+#if defined(CONFIG_64BIT) && (HZ == 128)
+ usecs *= 0x0008637bd05af6c7UL; /* 2**64 / (1000000 / HZ) */
+#elif defined(CONFIG_64BIT)
+ usecs *= (0x8000000000000000UL / (500000 / HZ));
+#else /* 32-bit junk follows here */
+ usecs *= (unsigned long) (((0x8000000000000000ULL / (500000 / HZ)) +
+ 0x80000000ULL) >> 32);
+#endif
+
+ if (sizeof(long) == 4)
+ __asm__("multu\t%2, %3"
+ : "=h" (usecs), "=l" (lo)
+ : "r" (usecs), "r" (lpj)
+ : GCC_REG_ACCUM);
+ else if (sizeof(long) == 8 && !R4000_WAR)
+ __asm__("dmultu\t%2, %3"
+ : "=h" (usecs), "=l" (lo)
+ : "r" (usecs), "r" (lpj)
+ : GCC_REG_ACCUM);
+ else if (sizeof(long) == 8 && R4000_WAR)
+ __asm__("dmultu\t%3, %4\n\tmfhi\t%0"
+ : "=r" (usecs), "=h" (hi), "=l" (lo)
+ : "r" (usecs), "r" (lpj)
+ : GCC_REG_ACCUM);
+
+ __delay(usecs);
+}
+
+#define __udelay_val cpu_data[raw_smp_processor_id()].udelay_val
+
+#define udelay(usecs) __udelay((usecs), __udelay_val)
+
+/* make sure "usecs *= ..." in udelay do not overflow. */
+#if HZ >= 1000
+#define MAX_UDELAY_MS 1
+#elif HZ <= 200
+#define MAX_UDELAY_MS 5
+#else
+#define MAX_UDELAY_MS (1000 / HZ)
+#endif
+
+#endif /* _ASM_DELAY_H */
diff --git a/arch/mips/include/asm/device.h b/arch/mips/include/asm/device.h
new file mode 100644
index 00000000000..d8f9872b0e2
--- /dev/null
+++ b/arch/mips/include/asm/device.h
@@ -0,0 +1,7 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#include <asm-generic/device.h>
+
diff --git a/arch/mips/include/asm/div64.h b/arch/mips/include/asm/div64.h
new file mode 100644
index 00000000000..d1d699105c1
--- /dev/null
+++ b/arch/mips/include/asm/div64.h
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2000, 2004 Maciej W. Rozycki
+ * Copyright (C) 2003, 07 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef _ASM_DIV64_H
+#define _ASM_DIV64_H
+
+#include <linux/types.h>
+
+#if (_MIPS_SZLONG == 32)
+
+#include <asm/compiler.h>
+
+/*
+ * No traps on overflows for any of these...
+ */
+
+#define do_div64_32(res, high, low, base) ({ \
+ unsigned long __quot32, __mod32; \
+ unsigned long __cf, __tmp, __tmp2, __i; \
+ \
+ __asm__(".set push\n\t" \
+ ".set noat\n\t" \
+ ".set noreorder\n\t" \
+ "move %2, $0\n\t" \
+ "move %3, $0\n\t" \
+ "b 1f\n\t" \
+ " li %4, 0x21\n" \
+ "0:\n\t" \
+ "sll $1, %0, 0x1\n\t" \
+ "srl %3, %0, 0x1f\n\t" \
+ "or %0, $1, %5\n\t" \
+ "sll %1, %1, 0x1\n\t" \
+ "sll %2, %2, 0x1\n" \
+ "1:\n\t" \
+ "bnez %3, 2f\n\t" \
+ " sltu %5, %0, %z6\n\t" \
+ "bnez %5, 3f\n" \
+ "2:\n\t" \
+ " addiu %4, %4, -1\n\t" \
+ "subu %0, %0, %z6\n\t" \
+ "addiu %2, %2, 1\n" \
+ "3:\n\t" \
+ "bnez %4, 0b\n\t" \
+ " srl %5, %1, 0x1f\n\t" \
+ ".set pop" \
+ : "=&r" (__mod32), "=&r" (__tmp), \
+ "=&r" (__quot32), "=&r" (__cf), \
+ "=&r" (__i), "=&r" (__tmp2) \
+ : "Jr" (base), "0" (high), "1" (low)); \
+ \
+ (res) = __quot32; \
+ __mod32; })
+
+#define do_div(n, base) ({ \
+ unsigned long long __quot; \
+ unsigned long __mod; \
+ unsigned long long __div; \
+ unsigned long __upper, __low, __high, __base; \
+ \
+ __div = (n); \
+ __base = (base); \
+ \
+ __high = __div >> 32; \
+ __low = __div; \
+ __upper = __high; \
+ \
+ if (__high) \
+ __asm__("divu $0, %z2, %z3" \
+ : "=h" (__upper), "=l" (__high) \
+ : "Jr" (__high), "Jr" (__base) \
+ : GCC_REG_ACCUM); \
+ \
+ __mod = do_div64_32(__low, __upper, __low, __base); \
+ \
+ __quot = __high; \
+ __quot = __quot << 32 | __low; \
+ (n) = __quot; \
+ __mod; })
+
+#endif /* (_MIPS_SZLONG == 32) */
+
+#if (_MIPS_SZLONG == 64)
+
+/*
+ * Hey, we're already 64-bit, no
+ * need to play games..
+ */
+#define do_div(n, base) ({ \
+ unsigned long __quot; \
+ unsigned int __mod; \
+ unsigned long __div; \
+ unsigned int __base; \
+ \
+ __div = (n); \
+ __base = (base); \
+ \
+ __mod = __div % __base; \
+ __quot = __div / __base; \
+ \
+ (n) = __quot; \
+ __mod; })
+
+#endif /* (_MIPS_SZLONG == 64) */
+
+#endif /* _ASM_DIV64_H */
diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
new file mode 100644
index 00000000000..c64afb40cd0
--- /dev/null
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -0,0 +1,81 @@
+#ifndef _ASM_DMA_MAPPING_H
+#define _ASM_DMA_MAPPING_H
+
+#include <asm/scatterlist.h>
+#include <asm/cache.h>
+
+void *dma_alloc_noncoherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t flag);
+
+void dma_free_noncoherent(struct device *dev, size_t size,
+ void *vaddr, dma_addr_t dma_handle);
+
+void *dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t flag);
+
+void dma_free_coherent(struct device *dev, size_t size,
+ void *vaddr, dma_addr_t dma_handle);
+
+extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
+ enum dma_data_direction direction);
+extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
+ size_t size, enum dma_data_direction direction);
+extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+ enum dma_data_direction direction);
+extern dma_addr_t dma_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t size, enum dma_data_direction direction);
+extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+ size_t size, enum dma_data_direction direction);
+extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+ int nhwentries, enum dma_data_direction direction);
+extern void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+ size_t size, enum dma_data_direction direction);
+extern void dma_sync_single_for_device(struct device *dev,
+ dma_addr_t dma_handle, size_t size, enum dma_data_direction direction);
+extern void dma_sync_single_range_for_cpu(struct device *dev,
+ dma_addr_t dma_handle, unsigned long offset, size_t size,
+ enum dma_data_direction direction);
+extern void dma_sync_single_range_for_device(struct device *dev,
+ dma_addr_t dma_handle, unsigned long offset, size_t size,
+ enum dma_data_direction direction);
+extern void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+ int nelems, enum dma_data_direction direction);
+extern void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+ int nelems, enum dma_data_direction direction);
+extern int dma_mapping_error(struct device *dev, dma_addr_t dma_addr);
+extern int dma_supported(struct device *dev, u64 mask);
+
+static inline int
+dma_set_mask(struct device *dev, u64 mask)
+{
+ if(!dev->dma_mask || !dma_supported(dev, mask))
+ return -EIO;
+
+ *dev->dma_mask = mask;
+
+ return 0;
+}
+
+static inline int
+dma_get_cache_alignment(void)
+{
+ /* XXX Largest on any MIPS */
+ return 128;
+}
+
+extern int dma_is_consistent(struct device *dev, dma_addr_t dma_addr);
+
+extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+ enum dma_data_direction direction);
+
+#if 0
+#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
+
+extern int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
+ dma_addr_t device_addr, size_t size, int flags);
+extern void dma_release_declared_memory(struct device *dev);
+extern void * dma_mark_declared_memory_occupied(struct device *dev,
+ dma_addr_t device_addr, size_t size);
+#endif
+
+#endif /* _ASM_DMA_MAPPING_H */
diff --git a/arch/mips/include/asm/dma.h b/arch/mips/include/asm/dma.h
new file mode 100644
index 00000000000..1353c81065d
--- /dev/null
+++ b/arch/mips/include/asm/dma.h
@@ -0,0 +1,315 @@
+/*
+ * linux/include/asm/dma.h: Defines for using and allocating dma channels.
+ * Written by Hennus Bergman, 1992.
+ * High DMA channel support & info by Hannu Savolainen
+ * and John Boyd, Nov. 1992.
+ *
+ * NOTE: all this is true *only* for ISA/EISA expansions on Mips boards
+ * and can only be used for expansion cards. Onboard DMA controllers, such
+ * as the R4030 on Jazz boards behave totally different!
+ */
+
+#ifndef _ASM_DMA_H
+#define _ASM_DMA_H
+
+#include <asm/io.h> /* need byte IO */
+#include <linux/spinlock.h> /* And spinlocks */
+#include <linux/delay.h>
+#include <asm/system.h>
+
+
+#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
+#define dma_outb outb_p
+#else
+#define dma_outb outb
+#endif
+
+#define dma_inb inb
+
+/*
+ * NOTES about DMA transfers:
+ *
+ * controller 1: channels 0-3, byte operations, ports 00-1F
+ * controller 2: channels 4-7, word operations, ports C0-DF
+ *
+ * - ALL registers are 8 bits only, regardless of transfer size
+ * - channel 4 is not used - cascades 1 into 2.
+ * - channels 0-3 are byte - addresses/counts are for physical bytes
+ * - channels 5-7 are word - addresses/counts are for physical words
+ * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
+ * - transfer count loaded to registers is 1 less than actual count
+ * - controller 2 offsets are all even (2x offsets for controller 1)
+ * - page registers for 5-7 don't use data bit 0, represent 128K pages
+ * - page registers for 0-3 use bit 0, represent 64K pages
+ *
+ * DMA transfers are limited to the lower 16MB of _physical_ memory.
+ * Note that addresses loaded into registers must be _physical_ addresses,
+ * not logical addresses (which may differ if paging is active).
+ *
+ * Address mapping for channels 0-3:
+ *
+ * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses)
+ * | ... | | ... | | ... |
+ * | ... | | ... | | ... |
+ * | ... | | ... | | ... |
+ * P7 ... P0 A7 ... A0 A7 ... A0
+ * | Page | Addr MSB | Addr LSB | (DMA registers)
+ *
+ * Address mapping for channels 5-7:
+ *
+ * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses)
+ * | ... | \ \ ... \ \ \ ... \ \
+ * | ... | \ \ ... \ \ \ ... \ (not used)
+ * | ... | \ \ ... \ \ \ ... \
+ * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0
+ * | Page | Addr MSB | Addr LSB | (DMA registers)
+ *
+ * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
+ * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
+ * the hardware level, so odd-byte transfers aren't possible).
+ *
+ * Transfer count (_not # bytes_) is limited to 64K, represented as actual
+ * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more,
+ * and up to 128K bytes may be transferred on channels 5-7 in one operation.
+ *
+ */
+
+#ifndef CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN
+#define MAX_DMA_CHANNELS 8
+#endif
+
+/*
+ * The maximum address in KSEG0 that we can perform a DMA transfer to on this
+ * platform. This describes only the PC style part of the DMA logic like on
+ * Deskstations or Acer PICA but not the much more versatile DMA logic used
+ * for the local devices on Acer PICA or Magnums.
+ */
+#if defined(CONFIG_SGI_IP22) || defined(CONFIG_SGI_IP28)
+/* don't care; ISA bus master won't work, ISA slave DMA supports 32bit addr */
+#define MAX_DMA_ADDRESS PAGE_OFFSET
+#else
+#define MAX_DMA_ADDRESS (PAGE_OFFSET + 0x01000000)
+#endif
+#define MAX_DMA_PFN PFN_DOWN(virt_to_phys((void *)MAX_DMA_ADDRESS))
+#define MAX_DMA32_PFN (1UL << (32 - PAGE_SHIFT))
+
+/* 8237 DMA controllers */
+#define IO_DMA1_BASE 0x00 /* 8 bit slave DMA, channels 0..3 */
+#define IO_DMA2_BASE 0xC0 /* 16 bit master DMA, ch 4(=slave input)..7 */
+
+/* DMA controller registers */
+#define DMA1_CMD_REG 0x08 /* command register (w) */
+#define DMA1_STAT_REG 0x08 /* status register (r) */
+#define DMA1_REQ_REG 0x09 /* request register (w) */
+#define DMA1_MASK_REG 0x0A /* single-channel mask (w) */
+#define DMA1_MODE_REG 0x0B /* mode register (w) */
+#define DMA1_CLEAR_FF_REG 0x0C /* clear pointer flip-flop (w) */
+#define DMA1_TEMP_REG 0x0D /* Temporary Register (r) */
+#define DMA1_RESET_REG 0x0D /* Master Clear (w) */
+#define DMA1_CLR_MASK_REG 0x0E /* Clear Mask */
+#define DMA1_MASK_ALL_REG 0x0F /* all-channels mask (w) */
+
+#define DMA2_CMD_REG 0xD0 /* command register (w) */
+#define DMA2_STAT_REG 0xD0 /* status register (r) */
+#define DMA2_REQ_REG 0xD2 /* request register (w) */
+#define DMA2_MASK_REG 0xD4 /* single-channel mask (w) */
+#define DMA2_MODE_REG 0xD6 /* mode register (w) */
+#define DMA2_CLEAR_FF_REG 0xD8 /* clear pointer flip-flop (w) */
+#define DMA2_TEMP_REG 0xDA /* Temporary Register (r) */
+#define DMA2_RESET_REG 0xDA /* Master Clear (w) */
+#define DMA2_CLR_MASK_REG 0xDC /* Clear Mask */
+#define DMA2_MASK_ALL_REG 0xDE /* all-channels mask (w) */
+
+#define DMA_ADDR_0 0x00 /* DMA address registers */
+#define DMA_ADDR_1 0x02
+#define DMA_ADDR_2 0x04
+#define DMA_ADDR_3 0x06
+#define DMA_ADDR_4 0xC0
+#define DMA_ADDR_5 0xC4
+#define DMA_ADDR_6 0xC8
+#define DMA_ADDR_7 0xCC
+
+#define DMA_CNT_0 0x01 /* DMA count registers */
+#define DMA_CNT_1 0x03
+#define DMA_CNT_2 0x05
+#define DMA_CNT_3 0x07
+#define DMA_CNT_4 0xC2
+#define DMA_CNT_5 0xC6
+#define DMA_CNT_6 0xCA
+#define DMA_CNT_7 0xCE
+
+#define DMA_PAGE_0 0x87 /* DMA page registers */
+#define DMA_PAGE_1 0x83
+#define DMA_PAGE_2 0x81
+#define DMA_PAGE_3 0x82
+#define DMA_PAGE_5 0x8B
+#define DMA_PAGE_6 0x89
+#define DMA_PAGE_7 0x8A
+
+#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */
+#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */
+#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */
+
+#define DMA_AUTOINIT 0x10
+
+extern spinlock_t dma_spin_lock;
+
+static __inline__ unsigned long claim_dma_lock(void)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&dma_spin_lock, flags);
+ return flags;
+}
+
+static __inline__ void release_dma_lock(unsigned long flags)
+{
+ spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+ if (dmanr<=3)
+ dma_outb(dmanr, DMA1_MASK_REG);
+ else
+ dma_outb(dmanr & 3, DMA2_MASK_REG);
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+ if (dmanr<=3)
+ dma_outb(dmanr | 4, DMA1_MASK_REG);
+ else
+ dma_outb((dmanr & 3) | 4, DMA2_MASK_REG);
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while holding the DMA lock ! ---
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+ if (dmanr<=3)
+ dma_outb(0, DMA1_CLEAR_FF_REG);
+ else
+ dma_outb(0, DMA2_CLEAR_FF_REG);
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+ if (dmanr<=3)
+ dma_outb(mode | dmanr, DMA1_MODE_REG);
+ else
+ dma_outb(mode | (dmanr&3), DMA2_MODE_REG);
+}
+
+/* Set only the page register bits of the transfer address.
+ * This is used for successive transfers when we know the contents of
+ * the lower 16 bits of the DMA current address register, but a 64k boundary
+ * may have been crossed.
+ */
+static __inline__ void set_dma_page(unsigned int dmanr, char pagenr)
+{
+ switch(dmanr) {
+ case 0:
+ dma_outb(pagenr, DMA_PAGE_0);
+ break;
+ case 1:
+ dma_outb(pagenr, DMA_PAGE_1);
+ break;
+ case 2:
+ dma_outb(pagenr, DMA_PAGE_2);
+ break;
+ case 3:
+ dma_outb(pagenr, DMA_PAGE_3);
+ break;
+ case 5:
+ dma_outb(pagenr & 0xfe, DMA_PAGE_5);
+ break;
+ case 6:
+ dma_outb(pagenr & 0xfe, DMA_PAGE_6);
+ break;
+ case 7:
+ dma_outb(pagenr & 0xfe, DMA_PAGE_7);
+ break;
+ }
+}
+
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+ set_dma_page(dmanr, a>>16);
+ if (dmanr <= 3) {
+ dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
+ dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
+ } else {
+ dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
+ dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
+ }
+}
+
+
+/* Set transfer size (max 64k for DMA0..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+ count--;
+ if (dmanr <= 3) {
+ dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
+ dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
+ } else {
+ dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
+ dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
+ }
+}
+
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+ unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
+ : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
+
+ /* using short to get 16-bit wrap around */
+ unsigned short count;
+
+ count = 1 + dma_inb(io_port);
+ count += dma_inb(io_port) << 8;
+
+ return (dmanr<=3)? count : (count<<1);
+}
+
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */
+extern void free_dma(unsigned int dmanr); /* release it again */
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy (0)
+#endif
+
+#endif /* _ASM_DMA_H */
diff --git a/arch/mips/include/asm/ds1286.h b/arch/mips/include/asm/ds1286.h
new file mode 100644
index 00000000000..6983b6ff0af
--- /dev/null
+++ b/arch/mips/include/asm/ds1286.h
@@ -0,0 +1,15 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Machine dependent access functions for RTC registers.
+ *
+ * Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef _ASM_DS1286_H
+#define _ASM_DS1286_H
+
+#include <ds1286.h>
+
+#endif /* _ASM_DS1286_H */
diff --git a/arch/mips/include/asm/ds1287.h b/arch/mips/include/asm/ds1287.h
new file mode 100644
index 00000000000..ba1702e8693
--- /dev/null
+++ b/arch/mips/include/asm/ds1287.h
@@ -0,0 +1,27 @@
+/*
+ * DS1287 timer functions.
+ *
+ * Copyright (C) 2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#ifndef __ASM_DS1287_H
+#define __ASM_DS1287_H
+
+extern int ds1287_timer_state(void);
+extern void ds1287_set_base_clock(unsigned int clock);
+extern int ds1287_clockevent_init(int irq);
+
+#endif
diff --git a/arch/mips/include/asm/dsp.h b/arch/mips/include/asm/dsp.h
new file mode 100644
index 00000000000..e9bfc0813c7
--- /dev/null
+++ b/arch/mips/include/asm/dsp.h
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2005 Mips Technologies
+ * Author: Chris Dearman, chris@mips.com derived from fpu.h
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_DSP_H
+#define _ASM_DSP_H
+
+#include <asm/cpu.h>
+#include <asm/cpu-features.h>
+#include <asm/hazards.h>
+#include <asm/mipsregs.h>
+
+#define DSP_DEFAULT 0x00000000
+#define DSP_MASK 0x3ff
+
+#define __enable_dsp_hazard() \
+do { \
+ asm("_ehb"); \
+} while (0)
+
+static inline void __init_dsp(void)
+{
+ mthi1(0);
+ mtlo1(0);
+ mthi2(0);
+ mtlo2(0);
+ mthi3(0);
+ mtlo3(0);
+ wrdsp(DSP_DEFAULT, DSP_MASK);
+}
+
+static inline void init_dsp(void)
+{
+ if (cpu_has_dsp)
+ __init_dsp();
+}
+
+#define __save_dsp(tsk) \
+do { \
+ tsk->thread.dsp.dspr[0] = mfhi1(); \
+ tsk->thread.dsp.dspr[1] = mflo1(); \
+ tsk->thread.dsp.dspr[2] = mfhi2(); \
+ tsk->thread.dsp.dspr[3] = mflo2(); \
+ tsk->thread.dsp.dspr[4] = mfhi3(); \
+ tsk->thread.dsp.dspr[5] = mflo3(); \
+ tsk->thread.dsp.dspcontrol = rddsp(DSP_MASK); \
+} while (0)
+
+#define save_dsp(tsk) \
+do { \
+ if (cpu_has_dsp) \
+ __save_dsp(tsk); \
+} while (0)
+
+#define __restore_dsp(tsk) \
+do { \
+ mthi1(tsk->thread.dsp.dspr[0]); \
+ mtlo1(tsk->thread.dsp.dspr[1]); \
+ mthi2(tsk->thread.dsp.dspr[2]); \
+ mtlo2(tsk->thread.dsp.dspr[3]); \
+ mthi3(tsk->thread.dsp.dspr[4]); \
+ mtlo3(tsk->thread.dsp.dspr[5]); \
+ wrdsp(tsk->thread.dsp.dspcontrol, DSP_MASK); \
+} while (0)
+
+#define restore_dsp(tsk) \
+do { \
+ if (cpu_has_dsp) \
+ __restore_dsp(tsk); \
+} while (0)
+
+#define __get_dsp_regs(tsk) \
+({ \
+ if (tsk == current) \
+ __save_dsp(current); \
+ \
+ tsk->thread.dsp.dspr; \
+})
+
+#endif /* _ASM_DSP_H */
diff --git a/arch/mips/include/asm/edac.h b/arch/mips/include/asm/edac.h
new file mode 100644
index 00000000000..4da0c1fe30d
--- /dev/null
+++ b/arch/mips/include/asm/edac.h
@@ -0,0 +1,34 @@
+#ifndef ASM_EDAC_H
+#define ASM_EDAC_H
+
+/* ECC atomic, DMA, SMP and interrupt safe scrub function */
+
+static inline void atomic_scrub(void *va, u32 size)
+{
+ unsigned long *virt_addr = va;
+ unsigned long temp;
+ u32 i;
+
+ for (i = 0; i < size / sizeof(unsigned long); i++) {
+ /*
+ * Very carefully read and write to memory atomically
+ * so we are interrupt, DMA and SMP safe.
+ *
+ * Intel: asm("lock; addl $0, %0"::"m"(*virt_addr));
+ */
+
+ __asm__ __volatile__ (
+ " .set mips2 \n"
+ "1: ll %0, %1 # atomic_scrub \n"
+ " addu %0, $0 \n"
+ " sc %0, %1 \n"
+ " beqz %0, 1b \n"
+ " .set mips0 \n"
+ : "=&r" (temp), "=m" (*virt_addr)
+ : "m" (*virt_addr));
+
+ virt_addr++;
+ }
+}
+
+#endif
diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h
new file mode 100644
index 00000000000..a8eac1697b3
--- /dev/null
+++ b/arch/mips/include/asm/elf.h
@@ -0,0 +1,367 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Much of this is taken from binutils and GNU libc ...
+ */
+#ifndef _ASM_ELF_H
+#define _ASM_ELF_H
+
+
+/* ELF header e_flags defines. */
+/* MIPS architecture level. */
+#define EF_MIPS_ARCH_1 0x00000000 /* -mips1 code. */
+#define EF_MIPS_ARCH_2 0x10000000 /* -mips2 code. */
+#define EF_MIPS_ARCH_3 0x20000000 /* -mips3 code. */
+#define EF_MIPS_ARCH_4 0x30000000 /* -mips4 code. */
+#define EF_MIPS_ARCH_5 0x40000000 /* -mips5 code. */
+#define EF_MIPS_ARCH_32 0x50000000 /* MIPS32 code. */
+#define EF_MIPS_ARCH_64 0x60000000 /* MIPS64 code. */
+#define EF_MIPS_ARCH_32R2 0x70000000 /* MIPS32 R2 code. */
+#define EF_MIPS_ARCH_64R2 0x80000000 /* MIPS64 R2 code. */
+
+/* The ABI of a file. */
+#define EF_MIPS_ABI_O32 0x00001000 /* O32 ABI. */
+#define EF_MIPS_ABI_O64 0x00002000 /* O32 extended for 64 bit. */
+
+#define PT_MIPS_REGINFO 0x70000000
+#define PT_MIPS_RTPROC 0x70000001
+#define PT_MIPS_OPTIONS 0x70000002
+
+/* Flags in the e_flags field of the header */
+#define EF_MIPS_NOREORDER 0x00000001
+#define EF_MIPS_PIC 0x00000002
+#define EF_MIPS_CPIC 0x00000004
+#define EF_MIPS_ABI2 0x00000020
+#define EF_MIPS_OPTIONS_FIRST 0x00000080
+#define EF_MIPS_32BITMODE 0x00000100
+#define EF_MIPS_ABI 0x0000f000
+#define EF_MIPS_ARCH 0xf0000000
+
+#define DT_MIPS_RLD_VERSION 0x70000001
+#define DT_MIPS_TIME_STAMP 0x70000002
+#define DT_MIPS_ICHECKSUM 0x70000003
+#define DT_MIPS_IVERSION 0x70000004
+#define DT_MIPS_FLAGS 0x70000005
+ #define RHF_NONE 0x00000000
+ #define RHF_HARDWAY 0x00000001
+ #define RHF_NOTPOT 0x00000002
+ #define RHF_SGI_ONLY 0x00000010
+#define DT_MIPS_BASE_ADDRESS 0x70000006
+#define DT_MIPS_CONFLICT 0x70000008
+#define DT_MIPS_LIBLIST 0x70000009
+#define DT_MIPS_LOCAL_GOTNO 0x7000000a
+#define DT_MIPS_CONFLICTNO 0x7000000b
+#define DT_MIPS_LIBLISTNO 0x70000010
+#define DT_MIPS_SYMTABNO 0x70000011
+#define DT_MIPS_UNREFEXTNO 0x70000012
+#define DT_MIPS_GOTSYM 0x70000013
+#define DT_MIPS_HIPAGENO 0x70000014
+#define DT_MIPS_RLD_MAP 0x70000016
+
+#define R_MIPS_NONE 0
+#define R_MIPS_16 1
+#define R_MIPS_32 2
+#define R_MIPS_REL32 3
+#define R_MIPS_26 4
+#define R_MIPS_HI16 5
+#define R_MIPS_LO16 6
+#define R_MIPS_GPREL16 7
+#define R_MIPS_LITERAL 8
+#define R_MIPS_GOT16 9
+#define R_MIPS_PC16 10
+#define R_MIPS_CALL16 11
+#define R_MIPS_GPREL32 12
+/* The remaining relocs are defined on Irix, although they are not
+ in the MIPS ELF ABI. */
+#define R_MIPS_UNUSED1 13
+#define R_MIPS_UNUSED2 14
+#define R_MIPS_UNUSED3 15
+#define R_MIPS_SHIFT5 16
+#define R_MIPS_SHIFT6 17
+#define R_MIPS_64 18
+#define R_MIPS_GOT_DISP 19
+#define R_MIPS_GOT_PAGE 20
+#define R_MIPS_GOT_OFST 21
+/*
+ * The following two relocation types are specified in the MIPS ABI
+ * conformance guide version 1.2 but not yet in the psABI.
+ */
+#define R_MIPS_GOTHI16 22
+#define R_MIPS_GOTLO16 23
+#define R_MIPS_SUB 24
+#define R_MIPS_INSERT_A 25
+#define R_MIPS_INSERT_B 26
+#define R_MIPS_DELETE 27
+#define R_MIPS_HIGHER 28
+#define R_MIPS_HIGHEST 29
+/*
+ * The following two relocation types are specified in the MIPS ABI
+ * conformance guide version 1.2 but not yet in the psABI.
+ */
+#define R_MIPS_CALLHI16 30
+#define R_MIPS_CALLLO16 31
+/*
+ * This range is reserved for vendor specific relocations.
+ */
+#define R_MIPS_LOVENDOR 100
+#define R_MIPS_HIVENDOR 127
+
+#define SHN_MIPS_ACCOMON 0xff00 /* Allocated common symbols */
+#define SHN_MIPS_TEXT 0xff01 /* Allocated test symbols. */
+#define SHN_MIPS_DATA 0xff02 /* Allocated data symbols. */
+#define SHN_MIPS_SCOMMON 0xff03 /* Small common symbols */
+#define SHN_MIPS_SUNDEFINED 0xff04 /* Small undefined symbols */
+
+#define SHT_MIPS_LIST 0x70000000
+#define SHT_MIPS_CONFLICT 0x70000002
+#define SHT_MIPS_GPTAB 0x70000003
+#define SHT_MIPS_UCODE 0x70000004
+#define SHT_MIPS_DEBUG 0x70000005
+#define SHT_MIPS_REGINFO 0x70000006
+#define SHT_MIPS_PACKAGE 0x70000007
+#define SHT_MIPS_PACKSYM 0x70000008
+#define SHT_MIPS_RELD 0x70000009
+#define SHT_MIPS_IFACE 0x7000000b
+#define SHT_MIPS_CONTENT 0x7000000c
+#define SHT_MIPS_OPTIONS 0x7000000d
+#define SHT_MIPS_SHDR 0x70000010
+#define SHT_MIPS_FDESC 0x70000011
+#define SHT_MIPS_EXTSYM 0x70000012
+#define SHT_MIPS_DENSE 0x70000013
+#define SHT_MIPS_PDESC 0x70000014
+#define SHT_MIPS_LOCSYM 0x70000015
+#define SHT_MIPS_AUXSYM 0x70000016
+#define SHT_MIPS_OPTSYM 0x70000017
+#define SHT_MIPS_LOCSTR 0x70000018
+#define SHT_MIPS_LINE 0x70000019
+#define SHT_MIPS_RFDESC 0x7000001a
+#define SHT_MIPS_DELTASYM 0x7000001b
+#define SHT_MIPS_DELTAINST 0x7000001c
+#define SHT_MIPS_DELTACLASS 0x7000001d
+#define SHT_MIPS_DWARF 0x7000001e
+#define SHT_MIPS_DELTADECL 0x7000001f
+#define SHT_MIPS_SYMBOL_LIB 0x70000020
+#define SHT_MIPS_EVENTS 0x70000021
+#define SHT_MIPS_TRANSLATE 0x70000022
+#define SHT_MIPS_PIXIE 0x70000023
+#define SHT_MIPS_XLATE 0x70000024
+#define SHT_MIPS_XLATE_DEBUG 0x70000025
+#define SHT_MIPS_WHIRL 0x70000026
+#define SHT_MIPS_EH_REGION 0x70000027
+#define SHT_MIPS_XLATE_OLD 0x70000028
+#define SHT_MIPS_PDR_EXCEPTION 0x70000029
+
+#define SHF_MIPS_GPREL 0x10000000
+#define SHF_MIPS_MERGE 0x20000000
+#define SHF_MIPS_ADDR 0x40000000
+#define SHF_MIPS_STRING 0x80000000
+#define SHF_MIPS_NOSTRIP 0x08000000
+#define SHF_MIPS_LOCAL 0x04000000
+#define SHF_MIPS_NAMES 0x02000000
+#define SHF_MIPS_NODUPES 0x01000000
+
+#ifndef ELF_ARCH
+/* ELF register definitions */
+#define ELF_NGREG 45
+#define ELF_NFPREG 33
+
+typedef unsigned long elf_greg_t;
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef double elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+#ifdef CONFIG_32BIT
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(hdr) \
+({ \
+ int __res = 1; \
+ struct elfhdr *__h = (hdr); \
+ \
+ if (__h->e_machine != EM_MIPS) \
+ __res = 0; \
+ if (__h->e_ident[EI_CLASS] != ELFCLASS32) \
+ __res = 0; \
+ if ((__h->e_flags & EF_MIPS_ABI2) != 0) \
+ __res = 0; \
+ if (((__h->e_flags & EF_MIPS_ABI) != 0) && \
+ ((__h->e_flags & EF_MIPS_ABI) != EF_MIPS_ABI_O32)) \
+ __res = 0; \
+ \
+ __res; \
+})
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS ELFCLASS32
+
+#endif /* CONFIG_32BIT */
+
+#ifdef CONFIG_64BIT
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(hdr) \
+({ \
+ int __res = 1; \
+ struct elfhdr *__h = (hdr); \
+ \
+ if (__h->e_machine != EM_MIPS) \
+ __res = 0; \
+ if (__h->e_ident[EI_CLASS] != ELFCLASS64) \
+ __res = 0; \
+ \
+ __res; \
+})
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS ELFCLASS64
+
+#endif /* CONFIG_64BIT */
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#ifdef __MIPSEB__
+#define ELF_DATA ELFDATA2MSB
+#elif __MIPSEL__
+#define ELF_DATA ELFDATA2LSB
+#endif
+#define ELF_ARCH EM_MIPS
+
+#endif /* !defined(ELF_ARCH) */
+
+struct mips_abi;
+
+extern struct mips_abi mips_abi;
+extern struct mips_abi mips_abi_32;
+extern struct mips_abi mips_abi_n32;
+
+#ifdef CONFIG_32BIT
+
+#define SET_PERSONALITY(ex) \
+do { \
+ set_personality(PER_LINUX); \
+ \
+ current->thread.abi = &mips_abi; \
+} while (0)
+
+#endif /* CONFIG_32BIT */
+
+#ifdef CONFIG_64BIT
+
+#ifdef CONFIG_MIPS32_N32
+#define __SET_PERSONALITY32_N32() \
+ do { \
+ set_thread_flag(TIF_32BIT_ADDR); \
+ current->thread.abi = &mips_abi_n32; \
+ } while (0)
+#else
+#define __SET_PERSONALITY32_N32() \
+ do { } while (0)
+#endif
+
+#ifdef CONFIG_MIPS32_O32
+#define __SET_PERSONALITY32_O32() \
+ do { \
+ set_thread_flag(TIF_32BIT_REGS); \
+ set_thread_flag(TIF_32BIT_ADDR); \
+ current->thread.abi = &mips_abi_32; \
+ } while (0)
+#else
+#define __SET_PERSONALITY32_O32() \
+ do { } while (0)
+#endif
+
+#ifdef CONFIG_MIPS32_COMPAT
+#define __SET_PERSONALITY32(ex) \
+do { \
+ if ((((ex).e_flags & EF_MIPS_ABI2) != 0) && \
+ ((ex).e_flags & EF_MIPS_ABI) == 0) \
+ __SET_PERSONALITY32_N32(); \
+ else \
+ __SET_PERSONALITY32_O32(); \
+} while (0)
+#else
+#define __SET_PERSONALITY32(ex) do { } while (0)
+#endif
+
+#define SET_PERSONALITY(ex) \
+do { \
+ clear_thread_flag(TIF_32BIT_REGS); \
+ clear_thread_flag(TIF_32BIT_ADDR); \
+ \
+ if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \
+ __SET_PERSONALITY32(ex); \
+ else \
+ current->thread.abi = &mips_abi; \
+ \
+ if (current->personality != PER_LINUX32) \
+ set_personality(PER_LINUX); \
+} while (0)
+
+#endif /* CONFIG_64BIT */
+
+struct task_struct;
+
+extern void elf_dump_regs(elf_greg_t *, struct pt_regs *regs);
+extern int dump_task_regs(struct task_struct *, elf_gregset_t *);
+extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *);
+
+#define ELF_CORE_COPY_REGS(elf_regs, regs) \
+ elf_dump_regs((elf_greg_t *)&(elf_regs), regs);
+#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
+#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) \
+ dump_task_fpu(tsk, elf_fpregs)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE PAGE_SIZE
+
+/* This yields a mask that user programs can use to figure out what
+ instruction set this cpu supports. This could be done in userspace,
+ but it's not easy, and we've already done it here. */
+
+#define ELF_HWCAP (0)
+
+/* This yields a string that ld.so will use to load implementation
+ specific libraries for optimization. This is more specific in
+ intent than poking at uname or /proc/cpuinfo.
+
+ For the moment, we have only optimizations for the Intel generations,
+ but that could change... */
+
+#define ELF_PLATFORM (NULL)
+
+/*
+ * See comments in asm-alpha/elf.h, this is the same thing
+ * on the MIPS.
+ */
+#define ELF_PLAT_INIT(_r, load_addr) do { \
+ _r->regs[1] = _r->regs[2] = _r->regs[3] = _r->regs[4] = 0; \
+ _r->regs[5] = _r->regs[6] = _r->regs[7] = _r->regs[8] = 0; \
+ _r->regs[9] = _r->regs[10] = _r->regs[11] = _r->regs[12] = 0; \
+ _r->regs[13] = _r->regs[14] = _r->regs[15] = _r->regs[16] = 0; \
+ _r->regs[17] = _r->regs[18] = _r->regs[19] = _r->regs[20] = 0; \
+ _r->regs[21] = _r->regs[22] = _r->regs[23] = _r->regs[24] = 0; \
+ _r->regs[25] = _r->regs[26] = _r->regs[27] = _r->regs[28] = 0; \
+ _r->regs[30] = _r->regs[31] = 0; \
+} while (0)
+
+/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
+ use of this is to invoke "./ld.so someprog" to test out a new version of
+ the loader. We need to make sure that it is out of the way of the program
+ that it will "exec", and that there is sufficient room for the brk. */
+
+#ifndef ELF_ET_DYN_BASE
+#define ELF_ET_DYN_BASE (TASK_SIZE / 3 * 2)
+#endif
+
+#endif /* _ASM_ELF_H */
diff --git a/arch/mips/include/asm/emergency-restart.h b/arch/mips/include/asm/emergency-restart.h
new file mode 100644
index 00000000000..108d8c48e42
--- /dev/null
+++ b/arch/mips/include/asm/emergency-restart.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_EMERGENCY_RESTART_H
+#define _ASM_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/mips/include/asm/emma2rh/emma2rh.h b/arch/mips/include/asm/emma2rh/emma2rh.h
new file mode 100644
index 00000000000..6a1af0af51e
--- /dev/null
+++ b/arch/mips/include/asm/emma2rh/emma2rh.h
@@ -0,0 +1,333 @@
+/*
+ * include/asm-mips/emma2rh/emma2rh.h
+ * This file is EMMA2RH common header.
+ *
+ * Copyright (C) NEC Electronics Corporation 2005-2006
+ *
+ * This file based on include/asm-mips/ddb5xxx/ddb5xxx.h
+ * Copyright 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_EMMA2RH_EMMA2RH_H
+#define __ASM_EMMA2RH_EMMA2RH_H
+
+#include <irq.h>
+
+/*
+ * EMMA2RH registers
+ */
+#define REGBASE 0x10000000
+
+#define EMMA2RH_BHIF_STRAP_0 (0x000010+REGBASE)
+#define EMMA2RH_BHIF_INT_ST_0 (0x000030+REGBASE)
+#define EMMA2RH_BHIF_INT_ST_1 (0x000034+REGBASE)
+#define EMMA2RH_BHIF_INT_ST_2 (0x000038+REGBASE)
+#define EMMA2RH_BHIF_INT_EN_0 (0x000040+REGBASE)
+#define EMMA2RH_BHIF_INT_EN_1 (0x000044+REGBASE)
+#define EMMA2RH_BHIF_INT_EN_2 (0x000048+REGBASE)
+#define EMMA2RH_BHIF_INT1_EN_0 (0x000050+REGBASE)
+#define EMMA2RH_BHIF_INT1_EN_1 (0x000054+REGBASE)
+#define EMMA2RH_BHIF_INT1_EN_2 (0x000058+REGBASE)
+#define EMMA2RH_BHIF_SW_INT (0x000070+REGBASE)
+#define EMMA2RH_BHIF_SW_INT_EN (0x000080+REGBASE)
+#define EMMA2RH_BHIF_SW_INT_CLR (0x000090+REGBASE)
+#define EMMA2RH_BHIF_MAIN_CTRL (0x0000b4+REGBASE)
+#define EMMA2RH_BHIF_EXCEPT_VECT_BASE_ADDRESS (0x0000c0+REGBASE)
+#define EMMA2RH_GPIO_DIR (0x110d20+REGBASE)
+#define EMMA2RH_GPIO_INT_ST (0x110d30+REGBASE)
+#define EMMA2RH_GPIO_INT_MASK (0x110d3c+REGBASE)
+#define EMMA2RH_GPIO_INT_MODE (0x110d48+REGBASE)
+#define EMMA2RH_GPIO_INT_CND_A (0x110d54+REGBASE)
+#define EMMA2RH_GPIO_INT_CND_B (0x110d60+REGBASE)
+#define EMMA2RH_PBRD_INT_EN (0x100010+REGBASE)
+#define EMMA2RH_PBRD_CLKSEL (0x100028+REGBASE)
+#define EMMA2RH_PFUR0_BASE (0x101000+REGBASE)
+#define EMMA2RH_PFUR1_BASE (0x102000+REGBASE)
+#define EMMA2RH_PFUR2_BASE (0x103000+REGBASE)
+#define EMMA2RH_PIIC0_BASE (0x107000+REGBASE)
+#define EMMA2RH_PIIC1_BASE (0x108000+REGBASE)
+#define EMMA2RH_PIIC2_BASE (0x109000+REGBASE)
+#define EMMA2RH_PCI_CONTROL (0x200000+REGBASE)
+#define EMMA2RH_PCI_ARBIT_CTR (0x200004+REGBASE)
+#define EMMA2RH_PCI_IWIN0_CTR (0x200010+REGBASE)
+#define EMMA2RH_PCI_IWIN1_CTR (0x200014+REGBASE)
+#define EMMA2RH_PCI_INIT_ESWP (0x200018+REGBASE)
+#define EMMA2RH_PCI_INT (0x200020+REGBASE)
+#define EMMA2RH_PCI_INT_EN (0x200024+REGBASE)
+#define EMMA2RH_PCI_TWIN_CTR (0x200030+REGBASE)
+#define EMMA2RH_PCI_TWIN_BADR (0x200034+REGBASE)
+#define EMMA2RH_PCI_TWIN0_DADR (0x200038+REGBASE)
+#define EMMA2RH_PCI_TWIN1_DADR (0x20003c+REGBASE)
+
+/*
+ * Memory map (physical address)
+ *
+ * Note most of the following address must be properly aligned by the
+ * corresponding size. For example, if PCI_IO_SIZE is 16MB, then
+ * PCI_IO_BASE must be aligned along 16MB boundary.
+ */
+
+/* the actual ram size is detected at run-time */
+#define EMMA2RH_RAM_BASE 0x00000000
+#define EMMA2RH_RAM_SIZE 0x10000000 /* less than 256MB */
+
+#define EMMA2RH_IO_BASE 0x10000000
+#define EMMA2RH_IO_SIZE 0x01000000 /* 16 MB */
+
+#define EMMA2RH_GENERALIO_BASE 0x11000000
+#define EMMA2RH_GENERALIO_SIZE 0x01000000 /* 16 MB */
+
+#define EMMA2RH_PCI_IO_BASE 0x12000000
+#define EMMA2RH_PCI_IO_SIZE 0x02000000 /* 32 MB */
+
+#define EMMA2RH_PCI_MEM_BASE 0x14000000
+#define EMMA2RH_PCI_MEM_SIZE 0x08000000 /* 128 MB */
+
+#define EMMA2RH_ROM_BASE 0x1c000000
+#define EMMA2RH_ROM_SIZE 0x04000000 /* 64 MB */
+
+#define EMMA2RH_PCI_CONFIG_BASE EMMA2RH_PCI_IO_BASE
+#define EMMA2RH_PCI_CONFIG_SIZE EMMA2RH_PCI_IO_SIZE
+
+#define NUM_CPU_IRQ 8
+#define NUM_EMMA2RH_IRQ 96
+
+#define CPU_EMMA2RH_CASCADE 2
+#define CPU_IRQ_BASE MIPS_CPU_IRQ_BASE
+#define EMMA2RH_IRQ_BASE (CPU_IRQ_BASE + NUM_CPU_IRQ)
+
+/*
+ * emma2rh irq defs
+ */
+
+#define EMMA2RH_IRQ_INT0 (0 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT1 (1 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT2 (2 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT3 (3 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT4 (4 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT5 (5 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT6 (6 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT7 (7 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT8 (8 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT9 (9 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT10 (10 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT11 (11 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT12 (12 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT13 (13 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT14 (14 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT15 (15 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT16 (16 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT17 (17 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT18 (18 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT19 (19 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT20 (20 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT21 (21 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT22 (22 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT23 (23 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT24 (24 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT25 (25 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT26 (26 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT27 (27 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT28 (28 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT29 (29 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT30 (30 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT31 (31 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT32 (32 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT33 (33 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT34 (34 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT35 (35 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT36 (36 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT37 (37 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT38 (38 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT39 (39 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT40 (40 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT41 (41 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT42 (42 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT43 (43 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT44 (44 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT45 (45 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT46 (46 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT47 (47 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT48 (48 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT49 (49 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT50 (50 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT51 (51 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT52 (52 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT53 (53 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT54 (54 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT55 (55 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT56 (56 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT57 (57 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT58 (58 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT59 (59 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT60 (60 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT61 (61 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT62 (62 + EMMA2RH_IRQ_BASE)
+#define EMMA2RH_IRQ_INT63 (63 + EMMA2RH_IRQ_BASE)
+
+#define EMMA2RH_IRQ_PFUR0 EMMA2RH_IRQ_INT49
+#define EMMA2RH_IRQ_PFUR1 EMMA2RH_IRQ_INT50
+#define EMMA2RH_IRQ_PFUR2 EMMA2RH_IRQ_INT51
+#define EMMA2RH_IRQ_PIIC0 EMMA2RH_IRQ_INT56
+#define EMMA2RH_IRQ_PIIC1 EMMA2RH_IRQ_INT57
+#define EMMA2RH_IRQ_PIIC2 EMMA2RH_IRQ_INT58
+
+/*
+ * EMMA2RH Register Access
+ */
+
+#define EMMA2RH_BASE (0xa0000000)
+
+static inline void emma2rh_sync(void)
+{
+ volatile u32 *p = (volatile u32 *)0xbfc00000;
+ (void)(*p);
+}
+
+static inline void emma2rh_out32(u32 offset, u32 val)
+{
+ *(volatile u32 *)(EMMA2RH_BASE | offset) = val;
+ emma2rh_sync();
+}
+
+static inline u32 emma2rh_in32(u32 offset)
+{
+ u32 val = *(volatile u32 *)(EMMA2RH_BASE | offset);
+ emma2rh_sync();
+ return val;
+}
+
+static inline void emma2rh_out16(u32 offset, u16 val)
+{
+ *(volatile u16 *)(EMMA2RH_BASE | offset) = val;
+ emma2rh_sync();
+}
+
+static inline u16 emma2rh_in16(u32 offset)
+{
+ u16 val = *(volatile u16 *)(EMMA2RH_BASE | offset);
+ emma2rh_sync();
+ return val;
+}
+
+static inline void emma2rh_out8(u32 offset, u8 val)
+{
+ *(volatile u8 *)(EMMA2RH_BASE | offset) = val;
+ emma2rh_sync();
+}
+
+static inline u8 emma2rh_in8(u32 offset)
+{
+ u8 val = *(volatile u8 *)(EMMA2RH_BASE | offset);
+ emma2rh_sync();
+ return val;
+}
+
+/**
+ * IIC registers map
+ **/
+
+/*---------------------------------------------------------------------------*/
+/* CNT - Control register (00H R/W) */
+/*---------------------------------------------------------------------------*/
+#define SPT 0x00000001
+#define STT 0x00000002
+#define ACKE 0x00000004
+#define WTIM 0x00000008
+#define SPIE 0x00000010
+#define WREL 0x00000020
+#define LREL 0x00000040
+#define IICE 0x00000080
+#define CNT_RESERVED 0x000000ff /* reserved bit 0 */
+
+#define I2C_EMMA_START (IICE | STT)
+#define I2C_EMMA_STOP (IICE | SPT)
+#define I2C_EMMA_REPSTART I2C_EMMA_START
+
+/*---------------------------------------------------------------------------*/
+/* STA - Status register (10H Read) */
+/*---------------------------------------------------------------------------*/
+#define MSTS 0x00000080
+#define ALD 0x00000040
+#define EXC 0x00000020
+#define COI 0x00000010
+#define TRC 0x00000008
+#define ACKD 0x00000004
+#define STD 0x00000002
+#define SPD 0x00000001
+
+/*---------------------------------------------------------------------------*/
+/* CSEL - Clock select register (20H R/W) */
+/*---------------------------------------------------------------------------*/
+#define FCL 0x00000080
+#define ND50 0x00000040
+#define CLD 0x00000020
+#define DAD 0x00000010
+#define SMC 0x00000008
+#define DFC 0x00000004
+#define CL 0x00000003
+#define CSEL_RESERVED 0x000000ff /* reserved bit 0 */
+
+#define FAST397 0x0000008b
+#define FAST297 0x0000008a
+#define FAST347 0x0000000b
+#define FAST260 0x0000000a
+#define FAST130 0x00000008
+#define STANDARD108 0x00000083
+#define STANDARD83 0x00000082
+#define STANDARD95 0x00000003
+#define STANDARD73 0x00000002
+#define STANDARD36 0x00000001
+#define STANDARD71 0x00000000
+
+/*---------------------------------------------------------------------------*/
+/* SVA - Slave address register (30H R/W) */
+/*---------------------------------------------------------------------------*/
+#define SVA 0x000000fe
+
+/*---------------------------------------------------------------------------*/
+/* SHR - Shift register (40H R/W) */
+/*---------------------------------------------------------------------------*/
+#define SR 0x000000ff
+
+/*---------------------------------------------------------------------------*/
+/* INT - Interrupt register (50H R/W) */
+/* INTM - Interrupt mask register (60H R/W) */
+/*---------------------------------------------------------------------------*/
+#define INTE0 0x00000001
+
+/***********************************************************************
+ * I2C registers
+ ***********************************************************************
+ */
+#define I2C_EMMA_CNT 0x00
+#define I2C_EMMA_STA 0x10
+#define I2C_EMMA_CSEL 0x20
+#define I2C_EMMA_SVA 0x30
+#define I2C_EMMA_SHR 0x40
+#define I2C_EMMA_INT 0x50
+#define I2C_EMMA_INTM 0x60
+
+/*
+ * include the board dependent part
+ */
+#if defined(CONFIG_MARKEINS)
+#include <asm/emma2rh/markeins.h>
+#else
+#error "Unknown EMMA2RH board!"
+#endif
+
+#endif /* __ASM_EMMA2RH_EMMA2RH_H */
diff --git a/arch/mips/include/asm/emma2rh/markeins.h b/arch/mips/include/asm/emma2rh/markeins.h
new file mode 100644
index 00000000000..973b0628490
--- /dev/null
+++ b/arch/mips/include/asm/emma2rh/markeins.h
@@ -0,0 +1,75 @@
+/*
+ * include/asm-mips/emma2rh/markeins.h
+ * This file is EMMA2RH board depended header.
+ *
+ * Copyright (C) NEC Electronics Corporation 2005-2006
+ *
+ * This file based on include/asm-mips/ddb5xxx/ddb5xxx.h
+ * Copyright 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef MARKEINS_H
+#define MARKEINS_H
+
+#define NUM_EMMA2RH_IRQ_SW 32
+#define NUM_EMMA2RH_IRQ_GPIO 32
+
+#define EMMA2RH_SW_CASCADE (EMMA2RH_IRQ_INT7 - EMMA2RH_IRQ_INT0)
+#define EMMA2RH_GPIO_CASCADE (EMMA2RH_IRQ_INT46 - EMMA2RH_IRQ_INT0)
+
+#define EMMA2RH_SW_IRQ_BASE (EMMA2RH_IRQ_BASE + NUM_EMMA2RH_IRQ)
+#define EMMA2RH_GPIO_IRQ_BASE (EMMA2RH_SW_IRQ_BASE + NUM_EMMA2RH_IRQ_SW)
+
+#define EMMA2RH_SW_IRQ_INT0 (0+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT1 (1+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT2 (2+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT3 (3+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT4 (4+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT5 (5+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT6 (6+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT7 (7+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT8 (8+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT9 (9+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT10 (10+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT11 (11+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT12 (12+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT13 (13+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT14 (14+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT15 (15+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT16 (16+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT17 (17+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT18 (18+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT19 (19+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT20 (20+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT21 (21+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT22 (22+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT23 (23+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT24 (24+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT25 (25+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT26 (26+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT27 (27+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT28 (28+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT29 (29+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT30 (30+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT31 (31+EMMA2RH_SW_IRQ_BASE)
+
+#define MARKEINS_PCI_IRQ_INTA EMMA2RH_GPIO_IRQ_BASE+15
+#define MARKEINS_PCI_IRQ_INTB EMMA2RH_GPIO_IRQ_BASE+16
+#define MARKEINS_PCI_IRQ_INTC EMMA2RH_GPIO_IRQ_BASE+17
+#define MARKEINS_PCI_IRQ_INTD EMMA2RH_GPIO_IRQ_BASE+18
+
+#endif /* CONFIG_MARKEINS */
diff --git a/arch/mips/include/asm/errno.h b/arch/mips/include/asm/errno.h
new file mode 100644
index 00000000000..3c0d840e457
--- /dev/null
+++ b/arch/mips/include/asm/errno.h
@@ -0,0 +1,131 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1999, 2001, 2002 by Ralf Baechle
+ */
+#ifndef _ASM_ERRNO_H
+#define _ASM_ERRNO_H
+
+/*
+ * These error numbers are intended to be MIPS ABI compatible
+ */
+
+#include <asm-generic/errno-base.h>
+
+#define ENOMSG 35 /* No message of desired type */
+#define EIDRM 36 /* Identifier removed */
+#define ECHRNG 37 /* Channel number out of range */
+#define EL2NSYNC 38 /* Level 2 not synchronized */
+#define EL3HLT 39 /* Level 3 halted */
+#define EL3RST 40 /* Level 3 reset */
+#define ELNRNG 41 /* Link number out of range */
+#define EUNATCH 42 /* Protocol driver not attached */
+#define ENOCSI 43 /* No CSI structure available */
+#define EL2HLT 44 /* Level 2 halted */
+#define EDEADLK 45 /* Resource deadlock would occur */
+#define ENOLCK 46 /* No record locks available */
+#define EBADE 50 /* Invalid exchange */
+#define EBADR 51 /* Invalid request descriptor */
+#define EXFULL 52 /* Exchange full */
+#define ENOANO 53 /* No anode */
+#define EBADRQC 54 /* Invalid request code */
+#define EBADSLT 55 /* Invalid slot */
+#define EDEADLOCK 56 /* File locking deadlock error */
+#define EBFONT 59 /* Bad font file format */
+#define ENOSTR 60 /* Device not a stream */
+#define ENODATA 61 /* No data available */
+#define ETIME 62 /* Timer expired */
+#define ENOSR 63 /* Out of streams resources */
+#define ENONET 64 /* Machine is not on the network */
+#define ENOPKG 65 /* Package not installed */
+#define EREMOTE 66 /* Object is remote */
+#define ENOLINK 67 /* Link has been severed */
+#define EADV 68 /* Advertise error */
+#define ESRMNT 69 /* Srmount error */
+#define ECOMM 70 /* Communication error on send */
+#define EPROTO 71 /* Protocol error */
+#define EDOTDOT 73 /* RFS specific error */
+#define EMULTIHOP 74 /* Multihop attempted */
+#define EBADMSG 77 /* Not a data message */
+#define ENAMETOOLONG 78 /* File name too long */
+#define EOVERFLOW 79 /* Value too large for defined data type */
+#define ENOTUNIQ 80 /* Name not unique on network */
+#define EBADFD 81 /* File descriptor in bad state */
+#define EREMCHG 82 /* Remote address changed */
+#define ELIBACC 83 /* Can not access a needed shared library */
+#define ELIBBAD 84 /* Accessing a corrupted shared library */
+#define ELIBSCN 85 /* .lib section in a.out corrupted */
+#define ELIBMAX 86 /* Attempting to link in too many shared libraries */
+#define ELIBEXEC 87 /* Cannot exec a shared library directly */
+#define EILSEQ 88 /* Illegal byte sequence */
+#define ENOSYS 89 /* Function not implemented */
+#define ELOOP 90 /* Too many symbolic links encountered */
+#define ERESTART 91 /* Interrupted system call should be restarted */
+#define ESTRPIPE 92 /* Streams pipe error */
+#define ENOTEMPTY 93 /* Directory not empty */
+#define EUSERS 94 /* Too many users */
+#define ENOTSOCK 95 /* Socket operation on non-socket */
+#define EDESTADDRREQ 96 /* Destination address required */
+#define EMSGSIZE 97 /* Message too long */
+#define EPROTOTYPE 98 /* Protocol wrong type for socket */
+#define ENOPROTOOPT 99 /* Protocol not available */
+#define EPROTONOSUPPORT 120 /* Protocol not supported */
+#define ESOCKTNOSUPPORT 121 /* Socket type not supported */
+#define EOPNOTSUPP 122 /* Operation not supported on transport endpoint */
+#define EPFNOSUPPORT 123 /* Protocol family not supported */
+#define EAFNOSUPPORT 124 /* Address family not supported by protocol */
+#define EADDRINUSE 125 /* Address already in use */
+#define EADDRNOTAVAIL 126 /* Cannot assign requested address */
+#define ENETDOWN 127 /* Network is down */
+#define ENETUNREACH 128 /* Network is unreachable */
+#define ENETRESET 129 /* Network dropped connection because of reset */
+#define ECONNABORTED 130 /* Software caused connection abort */
+#define ECONNRESET 131 /* Connection reset by peer */
+#define ENOBUFS 132 /* No buffer space available */
+#define EISCONN 133 /* Transport endpoint is already connected */
+#define ENOTCONN 134 /* Transport endpoint is not connected */
+#define EUCLEAN 135 /* Structure needs cleaning */
+#define ENOTNAM 137 /* Not a XENIX named type file */
+#define ENAVAIL 138 /* No XENIX semaphores available */
+#define EISNAM 139 /* Is a named type file */
+#define EREMOTEIO 140 /* Remote I/O error */
+#define EINIT 141 /* Reserved */
+#define EREMDEV 142 /* Error 142 */
+#define ESHUTDOWN 143 /* Cannot send after transport endpoint shutdown */
+#define ETOOMANYREFS 144 /* Too many references: cannot splice */
+#define ETIMEDOUT 145 /* Connection timed out */
+#define ECONNREFUSED 146 /* Connection refused */
+#define EHOSTDOWN 147 /* Host is down */
+#define EHOSTUNREACH 148 /* No route to host */
+#define EWOULDBLOCK EAGAIN /* Operation would block */
+#define EALREADY 149 /* Operation already in progress */
+#define EINPROGRESS 150 /* Operation now in progress */
+#define ESTALE 151 /* Stale NFS file handle */
+#define ECANCELED 158 /* AIO operation canceled */
+
+/*
+ * These error are Linux extensions.
+ */
+#define ENOMEDIUM 159 /* No medium found */
+#define EMEDIUMTYPE 160 /* Wrong medium type */
+#define ENOKEY 161 /* Required key not available */
+#define EKEYEXPIRED 162 /* Key has expired */
+#define EKEYREVOKED 163 /* Key has been revoked */
+#define EKEYREJECTED 164 /* Key was rejected by service */
+
+/* for robust mutexes */
+#define EOWNERDEAD 165 /* Owner died */
+#define ENOTRECOVERABLE 166 /* State not recoverable */
+
+#define EDQUOT 1133 /* Quota exceeded */
+
+#ifdef __KERNEL__
+
+/* The biggest error number defined here or in <linux/errno.h>. */
+#define EMAXERRNO 1133
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_ERRNO_H */
diff --git a/arch/mips/include/asm/fb.h b/arch/mips/include/asm/fb.h
new file mode 100644
index 00000000000..bd3f68c9ddf
--- /dev/null
+++ b/arch/mips/include/asm/fb.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+
+#include <linux/fb.h>
+#include <linux/fs.h>
+#include <asm/page.h>
+
+static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
+ unsigned long off)
+{
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+}
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+ return 0;
+}
+
+#endif /* _ASM_FB_H_ */
diff --git a/arch/mips/include/asm/fcntl.h b/arch/mips/include/asm/fcntl.h
new file mode 100644
index 00000000000..2a52333a062
--- /dev/null
+++ b/arch/mips/include/asm/fcntl.h
@@ -0,0 +1,61 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 96, 97, 98, 99, 2003, 05 Ralf Baechle
+ */
+#ifndef _ASM_FCNTL_H
+#define _ASM_FCNTL_H
+
+
+#define O_APPEND 0x0008
+#define O_SYNC 0x0010
+#define O_NONBLOCK 0x0080
+#define O_CREAT 0x0100 /* not fcntl */
+#define O_TRUNC 0x0200 /* not fcntl */
+#define O_EXCL 0x0400 /* not fcntl */
+#define O_NOCTTY 0x0800 /* not fcntl */
+#define FASYNC 0x1000 /* fcntl, for BSD compatibility */
+#define O_LARGEFILE 0x2000 /* allow large file opens */
+#define O_DIRECT 0x8000 /* direct disk access hint */
+
+#define F_GETLK 14
+#define F_SETLK 6
+#define F_SETLKW 7
+
+#define F_SETOWN 24 /* for sockets. */
+#define F_GETOWN 23 /* for sockets. */
+
+#ifndef __mips64
+#define F_GETLK64 33 /* using 'struct flock64' */
+#define F_SETLK64 34
+#define F_SETLKW64 35
+#endif
+
+/*
+ * The flavours of struct flock. "struct flock" is the ABI compliant
+ * variant. Finally struct flock64 is the LFS variant of struct flock. As
+ * a historic accident and inconsistence with the ABI definition it doesn't
+ * contain all the same fields as struct flock.
+ */
+
+#ifdef CONFIG_32BIT
+
+struct flock {
+ short l_type;
+ short l_whence;
+ off_t l_start;
+ off_t l_len;
+ long l_sysid;
+ __kernel_pid_t l_pid;
+ long pad[4];
+};
+
+#define HAVE_ARCH_STRUCT_FLOCK
+
+#endif /* CONFIG_32BIT */
+
+#include <asm-generic/fcntl.h>
+
+#endif /* _ASM_FCNTL_H */
diff --git a/arch/mips/include/asm/fixmap.h b/arch/mips/include/asm/fixmap.h
new file mode 100644
index 00000000000..9cc8522a394
--- /dev/null
+++ b/arch/mips/include/asm/fixmap.h
@@ -0,0 +1,118 @@
+/*
+ * fixmap.h: compile-time virtual memory allocation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Ingo Molnar
+ *
+ * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
+ */
+
+#ifndef _ASM_FIXMAP_H
+#define _ASM_FIXMAP_H
+
+#include <asm/page.h>
+#ifdef CONFIG_HIGHMEM
+#include <linux/threads.h>
+#include <asm/kmap_types.h>
+#endif
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process. We allocate these special addresses
+ * from the end of virtual memory (0xfffff000) backwards.
+ * Also this lets us do fail-safe vmalloc(), we
+ * can guarantee that these special addresses and
+ * vmalloc()-ed addresses never overlap.
+ *
+ * these 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages. (or larger if used with an increment
+ * highger than 1) use fixmap_set(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ */
+
+/*
+ * on UP currently we will have no trace of the fixmap mechanizm,
+ * no page table allocations, etc. This might change in the
+ * future, say framebuffers for the console driver(s) could be
+ * fix-mapped?
+ */
+enum fixed_addresses {
+#define FIX_N_COLOURS 8
+ FIX_CMAP_BEGIN,
+#ifdef CONFIG_MIPS_MT_SMTC
+ FIX_CMAP_END = FIX_CMAP_BEGIN + (FIX_N_COLOURS * NR_CPUS),
+#else
+ FIX_CMAP_END = FIX_CMAP_BEGIN + FIX_N_COLOURS,
+#endif
+#ifdef CONFIG_HIGHMEM
+ /* reserved pte's for temporary kernel mappings */
+ FIX_KMAP_BEGIN = FIX_CMAP_END + 1,
+ FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
+#endif
+ __end_of_fixed_addresses
+};
+
+/*
+ * used by vmalloc.c.
+ *
+ * Leave one empty page between vmalloc'ed areas and
+ * the start of the fixmap, and leave one page empty
+ * at the top of mem..
+ */
+#if defined(CONFIG_CPU_TX39XX) || defined(CONFIG_CPU_TX49XX)
+#define FIXADDR_TOP ((unsigned long)(long)(int)(0xff000000 - 0x20000))
+#else
+#define FIXADDR_TOP ((unsigned long)(long)(int)0xfffe0000)
+#endif
+#define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
+
+#define __fix_to_virt(x) (FIXADDR_TOP - ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x) ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
+
+extern void __this_fixmap_does_not_exist(void);
+
+/*
+ * 'index to address' translation. If anyone tries to use the idx
+ * directly without tranlation, we catch the bug with a NULL-deference
+ * kernel oops. Illegal ranges of incoming indices are caught too.
+ */
+static inline unsigned long fix_to_virt(const unsigned int idx)
+{
+ /*
+ * this branch gets completely eliminated after inlining,
+ * except when someone tries to use fixaddr indices in an
+ * illegal way. (such as mixing up address types or using
+ * out-of-range indices).
+ *
+ * If it doesn't get removed, the linker will complain
+ * loudly with a reasonably clear error message..
+ */
+ if (idx >= __end_of_fixed_addresses)
+ __this_fixmap_does_not_exist();
+
+ return __fix_to_virt(idx);
+}
+
+static inline unsigned long virt_to_fix(const unsigned long vaddr)
+{
+ BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+ return __virt_to_fix(vaddr);
+}
+
+/*
+ * Called from pgtable_init()
+ */
+extern void fixrange_init(unsigned long start, unsigned long end,
+ pgd_t *pgd_base);
+
+
+#endif
diff --git a/arch/mips/include/asm/floppy.h b/arch/mips/include/asm/floppy.h
new file mode 100644
index 00000000000..992d232adc8
--- /dev/null
+++ b/arch/mips/include/asm/floppy.h
@@ -0,0 +1,56 @@
+/*
+ * Architecture specific parts of the Floppy driver
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995 - 2000 Ralf Baechle
+ */
+#ifndef _ASM_FLOPPY_H
+#define _ASM_FLOPPY_H
+
+#include <linux/dma-mapping.h>
+
+static inline void fd_cacheflush(char * addr, long size)
+{
+ dma_cache_sync(NULL, addr, size, DMA_BIDIRECTIONAL);
+}
+
+#define MAX_BUFFER_SECTORS 24
+
+
+/*
+ * And on Mips's the CMOS info fails also ...
+ *
+ * FIXME: This information should come from the ARC configuration tree
+ * or whereever a particular machine has stored this ...
+ */
+#define FLOPPY0_TYPE fd_drive_type(0)
+#define FLOPPY1_TYPE fd_drive_type(1)
+
+#define FDC1 fd_getfdaddr1();
+
+#define N_FDC 1 /* do you *really* want a second controller? */
+#define N_DRIVE 8
+
+/*
+ * The DMA channel used by the floppy controller cannot access data at
+ * addresses >= 16MB
+ *
+ * Went back to the 1MB limit, as some people had problems with the floppy
+ * driver otherwise. It doesn't matter much for performance anyway, as most
+ * floppy accesses go through the track buffer.
+ *
+ * On MIPSes using vdma, this actually means that *all* transfers go thru
+ * the * track buffer since 0x1000000 is always smaller than KSEG0/1.
+ * Actually this needs to be a bit more complicated since the so much different
+ * hardware available with MIPS CPUs ...
+ */
+#define CROSS_64KB(a, s) ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64)
+
+#define EXTRA_FLOPPY_PARAMS
+
+#include <floppy.h>
+
+#endif /* _ASM_FLOPPY_H */
diff --git a/arch/mips/include/asm/fpregdef.h b/arch/mips/include/asm/fpregdef.h
new file mode 100644
index 00000000000..2b5fddc8f48
--- /dev/null
+++ b/arch/mips/include/asm/fpregdef.h
@@ -0,0 +1,99 @@
+/*
+ * Definitions for the FPU register names
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1999 Ralf Baechle
+ * Copyright (C) 1985 MIPS Computer Systems, Inc.
+ * Copyright (C) 1990 - 1992, 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_FPREGDEF_H
+#define _ASM_FPREGDEF_H
+
+#include <asm/sgidefs.h>
+
+#if _MIPS_SIM == _MIPS_SIM_ABI32
+
+/*
+ * These definitions only cover the R3000-ish 16/32 register model.
+ * But we're trying to be R3000 friendly anyway ...
+ */
+#define fv0 $f0 /* return value */
+#define fv0f $f1
+#define fv1 $f2
+#define fv1f $f3
+#define fa0 $f12 /* argument registers */
+#define fa0f $f13
+#define fa1 $f14
+#define fa1f $f15
+#define ft0 $f4 /* caller saved */
+#define ft0f $f5
+#define ft1 $f6
+#define ft1f $f7
+#define ft2 $f8
+#define ft2f $f9
+#define ft3 $f10
+#define ft3f $f11
+#define ft4 $f16
+#define ft4f $f17
+#define ft5 $f18
+#define ft5f $f19
+#define fs0 $f20 /* callee saved */
+#define fs0f $f21
+#define fs1 $f22
+#define fs1f $f23
+#define fs2 $f24
+#define fs2f $f25
+#define fs3 $f26
+#define fs3f $f27
+#define fs4 $f28
+#define fs4f $f29
+#define fs5 $f30
+#define fs5f $f31
+
+#define fcr31 $31 /* FPU status register */
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
+
+#if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32
+
+#define fv0 $f0 /* return value */
+#define fv1 $f2
+#define fa0 $f12 /* argument registers */
+#define fa1 $f13
+#define fa2 $f14
+#define fa3 $f15
+#define fa4 $f16
+#define fa5 $f17
+#define fa6 $f18
+#define fa7 $f19
+#define ft0 $f4 /* caller saved */
+#define ft1 $f5
+#define ft2 $f6
+#define ft3 $f7
+#define ft4 $f8
+#define ft5 $f9
+#define ft6 $f10
+#define ft7 $f11
+#define ft8 $f20
+#define ft9 $f21
+#define ft10 $f22
+#define ft11 $f23
+#define ft12 $f1
+#define ft13 $f3
+#define fs0 $f24 /* callee saved */
+#define fs1 $f25
+#define fs2 $f26
+#define fs3 $f27
+#define fs4 $f28
+#define fs5 $f29
+#define fs6 $f30
+#define fs7 $f31
+
+#define fcr31 $31
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 */
+
+#endif /* _ASM_FPREGDEF_H */
diff --git a/arch/mips/include/asm/fpu.h b/arch/mips/include/asm/fpu.h
new file mode 100644
index 00000000000..8a3ef247659
--- /dev/null
+++ b/arch/mips/include/asm/fpu.h
@@ -0,0 +1,153 @@
+/*
+ * Copyright (C) 2002 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_FPU_H
+#define _ASM_FPU_H
+
+#include <linux/sched.h>
+#include <linux/thread_info.h>
+#include <linux/bitops.h>
+
+#include <asm/mipsregs.h>
+#include <asm/cpu.h>
+#include <asm/cpu-features.h>
+#include <asm/hazards.h>
+#include <asm/processor.h>
+#include <asm/current.h>
+
+#ifdef CONFIG_MIPS_MT_FPAFF
+#include <asm/mips_mt.h>
+#endif
+
+struct sigcontext;
+struct sigcontext32;
+
+extern asmlinkage int (*save_fp_context)(struct sigcontext __user *sc);
+extern asmlinkage int (*restore_fp_context)(struct sigcontext __user *sc);
+
+extern asmlinkage int (*save_fp_context32)(struct sigcontext32 __user *sc);
+extern asmlinkage int (*restore_fp_context32)(struct sigcontext32 __user *sc);
+
+extern void fpu_emulator_init_fpu(void);
+extern int fpu_emulator_save_context(struct sigcontext __user *sc);
+extern int fpu_emulator_restore_context(struct sigcontext __user *sc);
+extern void _init_fpu(void);
+extern void _save_fp(struct task_struct *);
+extern void _restore_fp(struct task_struct *);
+
+#define __enable_fpu() \
+do { \
+ set_c0_status(ST0_CU1); \
+ enable_fpu_hazard(); \
+} while (0)
+
+#define __disable_fpu() \
+do { \
+ clear_c0_status(ST0_CU1); \
+ disable_fpu_hazard(); \
+} while (0)
+
+#define enable_fpu() \
+do { \
+ if (cpu_has_fpu) \
+ __enable_fpu(); \
+} while (0)
+
+#define disable_fpu() \
+do { \
+ if (cpu_has_fpu) \
+ __disable_fpu(); \
+} while (0)
+
+
+#define clear_fpu_owner() clear_thread_flag(TIF_USEDFPU)
+
+static inline int __is_fpu_owner(void)
+{
+ return test_thread_flag(TIF_USEDFPU);
+}
+
+static inline int is_fpu_owner(void)
+{
+ return cpu_has_fpu && __is_fpu_owner();
+}
+
+static inline void __own_fpu(void)
+{
+ __enable_fpu();
+ KSTK_STATUS(current) |= ST0_CU1;
+ set_thread_flag(TIF_USEDFPU);
+}
+
+static inline void own_fpu_inatomic(int restore)
+{
+ if (cpu_has_fpu && !__is_fpu_owner()) {
+ __own_fpu();
+ if (restore)
+ _restore_fp(current);
+ }
+}
+
+static inline void own_fpu(int restore)
+{
+ preempt_disable();
+ own_fpu_inatomic(restore);
+ preempt_enable();
+}
+
+static inline void lose_fpu(int save)
+{
+ preempt_disable();
+ if (is_fpu_owner()) {
+ if (save)
+ _save_fp(current);
+ KSTK_STATUS(current) &= ~ST0_CU1;
+ clear_thread_flag(TIF_USEDFPU);
+ __disable_fpu();
+ }
+ preempt_enable();
+}
+
+static inline void init_fpu(void)
+{
+ preempt_disable();
+ if (cpu_has_fpu) {
+ __own_fpu();
+ _init_fpu();
+ } else {
+ fpu_emulator_init_fpu();
+ }
+ preempt_enable();
+}
+
+static inline void save_fp(struct task_struct *tsk)
+{
+ if (cpu_has_fpu)
+ _save_fp(tsk);
+}
+
+static inline void restore_fp(struct task_struct *tsk)
+{
+ if (cpu_has_fpu)
+ _restore_fp(tsk);
+}
+
+static inline fpureg_t *get_fpu_regs(struct task_struct *tsk)
+{
+ if (tsk == current) {
+ preempt_disable();
+ if (is_fpu_owner())
+ _save_fp(current);
+ preempt_enable();
+ }
+
+ return tsk->thread.fpu.fpr;
+}
+
+#endif /* _ASM_FPU_H */
diff --git a/arch/mips/include/asm/fpu_emulator.h b/arch/mips/include/asm/fpu_emulator.h
new file mode 100644
index 00000000000..2731c38bd7a
--- /dev/null
+++ b/arch/mips/include/asm/fpu_emulator.h
@@ -0,0 +1,37 @@
+/*
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Further private data for which no space exists in mips_fpu_struct.
+ * This should be subsumed into the mips_fpu_struct structure as
+ * defined in processor.h as soon as the absurd wired absolute assembler
+ * offsets become dynamic at compile time.
+ *
+ * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
+ */
+#ifndef _ASM_FPU_EMULATOR_H
+#define _ASM_FPU_EMULATOR_H
+
+struct mips_fpu_emulator_stats {
+ unsigned int emulated;
+ unsigned int loads;
+ unsigned int stores;
+ unsigned int cp1ops;
+ unsigned int cp1xops;
+ unsigned int errors;
+};
+
+extern struct mips_fpu_emulator_stats fpuemustats;
+
+#endif /* _ASM_FPU_EMULATOR_H */
diff --git a/arch/mips/include/asm/futex.h b/arch/mips/include/asm/futex.h
new file mode 100644
index 00000000000..b9cce90346c
--- /dev/null
+++ b/arch/mips/include/asm/futex.h
@@ -0,0 +1,203 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2006 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef _ASM_FUTEX_H
+#define _ASM_FUTEX_H
+
+#ifdef __KERNEL__
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/barrier.h>
+#include <asm/errno.h>
+#include <asm/war.h>
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
+{ \
+ if (cpu_has_llsc && R10000_LLSC_WAR) { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " .set mips3 \n" \
+ "1: ll %1, %4 # __futex_atomic_op \n" \
+ " .set mips0 \n" \
+ " " insn " \n" \
+ " .set mips3 \n" \
+ "2: sc $1, %2 \n" \
+ " beqzl $1, 1b \n" \
+ __WEAK_LLSC_MB \
+ "3: \n" \
+ " .set pop \n" \
+ " .set mips0 \n" \
+ " .section .fixup,\"ax\" \n" \
+ "4: li %0, %6 \n" \
+ " j 3b \n" \
+ " .previous \n" \
+ " .section __ex_table,\"a\" \n" \
+ " "__UA_ADDR "\t1b, 4b \n" \
+ " "__UA_ADDR "\t2b, 4b \n" \
+ " .previous \n" \
+ : "=r" (ret), "=&r" (oldval), "=R" (*uaddr) \
+ : "0" (0), "R" (*uaddr), "Jr" (oparg), "i" (-EFAULT) \
+ : "memory"); \
+ } else if (cpu_has_llsc) { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " .set mips3 \n" \
+ "1: ll %1, %4 # __futex_atomic_op \n" \
+ " .set mips0 \n" \
+ " " insn " \n" \
+ " .set mips3 \n" \
+ "2: sc $1, %2 \n" \
+ " beqz $1, 1b \n" \
+ __WEAK_LLSC_MB \
+ "3: \n" \
+ " .set pop \n" \
+ " .set mips0 \n" \
+ " .section .fixup,\"ax\" \n" \
+ "4: li %0, %6 \n" \
+ " j 3b \n" \
+ " .previous \n" \
+ " .section __ex_table,\"a\" \n" \
+ " "__UA_ADDR "\t1b, 4b \n" \
+ " "__UA_ADDR "\t2b, 4b \n" \
+ " .previous \n" \
+ : "=r" (ret), "=&r" (oldval), "=R" (*uaddr) \
+ : "0" (0), "R" (*uaddr), "Jr" (oparg), "i" (-EFAULT) \
+ : "memory"); \
+ } else \
+ ret = -ENOSYS; \
+}
+
+static inline int
+futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
+{
+ int op = (encoded_op >> 28) & 7;
+ int cmp = (encoded_op >> 24) & 15;
+ int oparg = (encoded_op << 8) >> 20;
+ int cmparg = (encoded_op << 20) >> 20;
+ int oldval = 0, ret;
+ if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+ oparg = 1 << oparg;
+
+ if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int)))
+ return -EFAULT;
+
+ pagefault_disable();
+
+ switch (op) {
+ case FUTEX_OP_SET:
+ __futex_atomic_op("move $1, %z5", ret, oldval, uaddr, oparg);
+ break;
+
+ case FUTEX_OP_ADD:
+ __futex_atomic_op("addu $1, %1, %z5",
+ ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_OR:
+ __futex_atomic_op("or $1, %1, %z5",
+ ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_ANDN:
+ __futex_atomic_op("and $1, %1, %z5",
+ ret, oldval, uaddr, ~oparg);
+ break;
+ case FUTEX_OP_XOR:
+ __futex_atomic_op("xor $1, %1, %z5",
+ ret, oldval, uaddr, oparg);
+ break;
+ default:
+ ret = -ENOSYS;
+ }
+
+ pagefault_enable();
+
+ if (!ret) {
+ switch (cmp) {
+ case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+ case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+ case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+ case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+ case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+ case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+ default: ret = -ENOSYS;
+ }
+ }
+ return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+{
+ int retval;
+
+ if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+ return -EFAULT;
+
+ if (cpu_has_llsc && R10000_LLSC_WAR) {
+ __asm__ __volatile__(
+ "# futex_atomic_cmpxchg_inatomic \n"
+ " .set push \n"
+ " .set noat \n"
+ " .set mips3 \n"
+ "1: ll %0, %2 \n"
+ " bne %0, %z3, 3f \n"
+ " .set mips0 \n"
+ " move $1, %z4 \n"
+ " .set mips3 \n"
+ "2: sc $1, %1 \n"
+ " beqzl $1, 1b \n"
+ __WEAK_LLSC_MB
+ "3: \n"
+ " .set pop \n"
+ " .section .fixup,\"ax\" \n"
+ "4: li %0, %5 \n"
+ " j 3b \n"
+ " .previous \n"
+ " .section __ex_table,\"a\" \n"
+ " "__UA_ADDR "\t1b, 4b \n"
+ " "__UA_ADDR "\t2b, 4b \n"
+ " .previous \n"
+ : "=&r" (retval), "=R" (*uaddr)
+ : "R" (*uaddr), "Jr" (oldval), "Jr" (newval), "i" (-EFAULT)
+ : "memory");
+ } else if (cpu_has_llsc) {
+ __asm__ __volatile__(
+ "# futex_atomic_cmpxchg_inatomic \n"
+ " .set push \n"
+ " .set noat \n"
+ " .set mips3 \n"
+ "1: ll %0, %2 \n"
+ " bne %0, %z3, 3f \n"
+ " .set mips0 \n"
+ " move $1, %z4 \n"
+ " .set mips3 \n"
+ "2: sc $1, %1 \n"
+ " beqz $1, 1b \n"
+ __WEAK_LLSC_MB
+ "3: \n"
+ " .set pop \n"
+ " .section .fixup,\"ax\" \n"
+ "4: li %0, %5 \n"
+ " j 3b \n"
+ " .previous \n"
+ " .section __ex_table,\"a\" \n"
+ " "__UA_ADDR "\t1b, 4b \n"
+ " "__UA_ADDR "\t2b, 4b \n"
+ " .previous \n"
+ : "=&r" (retval), "=R" (*uaddr)
+ : "R" (*uaddr), "Jr" (oldval), "Jr" (newval), "i" (-EFAULT)
+ : "memory");
+ } else
+ return -ENOSYS;
+
+ return retval;
+}
+
+#endif
+#endif /* _ASM_FUTEX_H */
diff --git a/arch/mips/include/asm/fw/arc/hinv.h b/arch/mips/include/asm/fw/arc/hinv.h
new file mode 100644
index 00000000000..e6ff4add04e
--- /dev/null
+++ b/arch/mips/include/asm/fw/arc/hinv.h
@@ -0,0 +1,175 @@
+/*
+ * ARCS hardware/memory inventory/configuration and system ID definitions.
+ */
+#ifndef _ASM_ARC_HINV_H
+#define _ASM_ARC_HINV_H
+
+#include <asm/sgidefs.h>
+#include <asm/fw/arc/types.h>
+
+/* configuration query defines */
+typedef enum configclass {
+ SystemClass,
+ ProcessorClass,
+ CacheClass,
+#ifndef _NT_PROM
+ MemoryClass,
+ AdapterClass,
+ ControllerClass,
+ PeripheralClass
+#else /* _NT_PROM */
+ AdapterClass,
+ ControllerClass,
+ PeripheralClass,
+ MemoryClass
+#endif /* _NT_PROM */
+} CONFIGCLASS;
+
+typedef enum configtype {
+ ARC,
+ CPU,
+ FPU,
+ PrimaryICache,
+ PrimaryDCache,
+ SecondaryICache,
+ SecondaryDCache,
+ SecondaryCache,
+#ifndef _NT_PROM
+ Memory,
+#endif
+ EISAAdapter,
+ TCAdapter,
+ SCSIAdapter,
+ DTIAdapter,
+ MultiFunctionAdapter,
+ DiskController,
+ TapeController,
+ CDROMController,
+ WORMController,
+ SerialController,
+ NetworkController,
+ DisplayController,
+ ParallelController,
+ PointerController,
+ KeyboardController,
+ AudioController,
+ OtherController,
+ DiskPeripheral,
+ FloppyDiskPeripheral,
+ TapePeripheral,
+ ModemPeripheral,
+ MonitorPeripheral,
+ PrinterPeripheral,
+ PointerPeripheral,
+ KeyboardPeripheral,
+ TerminalPeripheral,
+ LinePeripheral,
+ NetworkPeripheral,
+#ifdef _NT_PROM
+ Memory,
+#endif
+ OtherPeripheral,
+
+ /* new stuff for IP30 */
+ /* added without moving anything */
+ /* except ANONYMOUS. */
+
+ XTalkAdapter,
+ PCIAdapter,
+ GIOAdapter,
+ TPUAdapter,
+
+ Anonymous
+} CONFIGTYPE;
+
+typedef enum {
+ Failed = 1,
+ ReadOnly = 2,
+ Removable = 4,
+ ConsoleIn = 8,
+ ConsoleOut = 16,
+ Input = 32,
+ Output = 64
+} IDENTIFIERFLAG;
+
+#ifndef NULL /* for GetChild(NULL); */
+#define NULL 0
+#endif
+
+union key_u {
+ struct {
+#ifdef _MIPSEB
+ unsigned char c_bsize; /* block size in lines */
+ unsigned char c_lsize; /* line size in bytes/tag */
+ unsigned short c_size; /* cache size in 4K pages */
+#else /* _MIPSEL */
+ unsigned short c_size; /* cache size in 4K pages */
+ unsigned char c_lsize; /* line size in bytes/tag */
+ unsigned char c_bsize; /* block size in lines */
+#endif /* _MIPSEL */
+ } cache;
+ ULONG FullKey;
+};
+
+#if _MIPS_SIM == _MIPS_SIM_ABI64
+#define SGI_ARCS_VERS 64 /* sgi 64-bit version */
+#define SGI_ARCS_REV 0 /* rev .00 */
+#else
+#define SGI_ARCS_VERS 1 /* first version */
+#define SGI_ARCS_REV 10 /* rev .10, 3/04/92 */
+#endif
+
+typedef struct component {
+ CONFIGCLASS Class;
+ CONFIGTYPE Type;
+ IDENTIFIERFLAG Flags;
+ USHORT Version;
+ USHORT Revision;
+ ULONG Key;
+ ULONG AffinityMask;
+ ULONG ConfigurationDataSize;
+ ULONG IdentifierLength;
+ char *Identifier;
+} COMPONENT;
+
+/* internal structure that holds pathname parsing data */
+struct cfgdata {
+ char *name; /* full name */
+ int minlen; /* minimum length to match */
+ CONFIGTYPE type; /* type of token */
+};
+
+/* System ID */
+typedef struct systemid {
+ CHAR VendorId[8];
+ CHAR ProductId[8];
+} SYSTEMID;
+
+/* memory query functions */
+typedef enum memorytype {
+ ExceptionBlock,
+ SPBPage, /* ARCS == SystemParameterBlock */
+#ifndef _NT_PROM
+ FreeContiguous,
+ FreeMemory,
+ BadMemory,
+ LoadedProgram,
+ FirmwareTemporary,
+ FirmwarePermanent
+#else /* _NT_PROM */
+ FreeMemory,
+ BadMemory,
+ LoadedProgram,
+ FirmwareTemporary,
+ FirmwarePermanent,
+ FreeContiguous
+#endif /* _NT_PROM */
+} MEMORYTYPE;
+
+typedef struct memorydescriptor {
+ MEMORYTYPE Type;
+ LONG BasePage;
+ LONG PageCount;
+} MEMORYDESCRIPTOR;
+
+#endif /* _ASM_ARC_HINV_H */
diff --git a/arch/mips/include/asm/fw/arc/types.h b/arch/mips/include/asm/fw/arc/types.h
new file mode 100644
index 00000000000..b9adcd6f086
--- /dev/null
+++ b/arch/mips/include/asm/fw/arc/types.h
@@ -0,0 +1,86 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 1999 Ralf Baechle (ralf@gnu.org)
+ * Copyright 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_ARC_TYPES_H
+#define _ASM_ARC_TYPES_H
+
+
+#ifdef CONFIG_ARC32
+
+typedef char CHAR;
+typedef short SHORT;
+typedef long LARGE_INTEGER __attribute__ ((__mode__ (__DI__)));
+typedef long LONG __attribute__ ((__mode__ (__SI__)));
+typedef unsigned char UCHAR;
+typedef unsigned short USHORT;
+typedef unsigned long ULONG __attribute__ ((__mode__ (__SI__)));
+typedef void VOID;
+
+/* The pointer types. Note that we're using a 64-bit compiler but all
+ pointer in the ARC structures are only 32-bit, so we need some disgusting
+ workarounds. Keep your vomit bag handy. */
+typedef LONG _PCHAR;
+typedef LONG _PSHORT;
+typedef LONG _PLARGE_INTEGER;
+typedef LONG _PLONG;
+typedef LONG _PUCHAR;
+typedef LONG _PUSHORT;
+typedef LONG _PULONG;
+typedef LONG _PVOID;
+
+#endif /* CONFIG_ARC32 */
+
+#ifdef CONFIG_ARC64
+
+typedef char CHAR;
+typedef short SHORT;
+typedef long LARGE_INTEGER __attribute__ ((__mode__ (__DI__)));
+typedef long LONG __attribute__ ((__mode__ (__DI__)));
+typedef unsigned char UCHAR;
+typedef unsigned short USHORT;
+typedef unsigned long ULONG __attribute__ ((__mode__ (__DI__)));
+typedef void VOID;
+
+/* The pointer types. We're 64-bit and the firmware is also 64-bit, so
+ live is sane ... */
+typedef CHAR *_PCHAR;
+typedef SHORT *_PSHORT;
+typedef LARGE_INTEGER *_PLARGE_INTEGER;
+typedef LONG *_PLONG;
+typedef UCHAR *_PUCHAR;
+typedef USHORT *_PUSHORT;
+typedef ULONG *_PULONG;
+typedef VOID *_PVOID;
+
+#endif /* CONFIG_ARC64 */
+
+typedef CHAR *PCHAR;
+typedef SHORT *PSHORT;
+typedef LARGE_INTEGER *PLARGE_INTEGER;
+typedef LONG *PLONG;
+typedef UCHAR *PUCHAR;
+typedef USHORT *PUSHORT;
+typedef ULONG *PULONG;
+typedef VOID *PVOID;
+
+/*
+ * Return type of ArcGetDisplayStatus()
+ */
+typedef struct {
+ USHORT CursorXPosition;
+ USHORT CursorYPosition;
+ USHORT CursorMaxXPosition;
+ USHORT CursorMaxYPosition;
+ USHORT ForegroundColor;
+ USHORT BackgroundColor;
+ UCHAR HighIntensity;
+ UCHAR Underscored;
+ UCHAR ReverseVideo;
+} DISPLAY_STATUS;
+
+#endif /* _ASM_ARC_TYPES_H */
diff --git a/arch/mips/include/asm/fw/cfe/cfe_api.h b/arch/mips/include/asm/fw/cfe/cfe_api.h
new file mode 100644
index 00000000000..0995575db32
--- /dev/null
+++ b/arch/mips/include/asm/fw/cfe/cfe_api.h
@@ -0,0 +1,122 @@
+/*
+ * Copyright (C) 2000, 2001, 2002 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+/*
+ * Broadcom Common Firmware Environment (CFE)
+ *
+ * This file contains declarations for doing callbacks to
+ * cfe from an application. It should be the only header
+ * needed by the application to use this library
+ *
+ * Authors: Mitch Lichtenberg, Chris Demetriou
+ */
+#ifndef CFE_API_H
+#define CFE_API_H
+
+#include <linux/types.h>
+#include <linux/string.h>
+
+typedef long intptr_t;
+
+
+/*
+ * Constants
+ */
+
+/* Seal indicating CFE's presence, passed to user program. */
+#define CFE_EPTSEAL 0x43464531
+
+#define CFE_MI_RESERVED 0 /* memory is reserved, do not use */
+#define CFE_MI_AVAILABLE 1 /* memory is available */
+
+#define CFE_FLG_WARMSTART 0x00000001
+#define CFE_FLG_FULL_ARENA 0x00000001
+#define CFE_FLG_ENV_PERMANENT 0x00000001
+
+#define CFE_CPU_CMD_START 1
+#define CFE_CPU_CMD_STOP 0
+
+#define CFE_STDHANDLE_CONSOLE 0
+
+#define CFE_DEV_NETWORK 1
+#define CFE_DEV_DISK 2
+#define CFE_DEV_FLASH 3
+#define CFE_DEV_SERIAL 4
+#define CFE_DEV_CPU 5
+#define CFE_DEV_NVRAM 6
+#define CFE_DEV_CLOCK 7
+#define CFE_DEV_OTHER 8
+#define CFE_DEV_MASK 0x0F
+
+#define CFE_CACHE_FLUSH_D 1
+#define CFE_CACHE_INVAL_I 2
+#define CFE_CACHE_INVAL_D 4
+#define CFE_CACHE_INVAL_L2 8
+
+#define CFE_FWI_64BIT 0x00000001
+#define CFE_FWI_32BIT 0x00000002
+#define CFE_FWI_RELOC 0x00000004
+#define CFE_FWI_UNCACHED 0x00000008
+#define CFE_FWI_MULTICPU 0x00000010
+#define CFE_FWI_FUNCSIM 0x00000020
+#define CFE_FWI_RTLSIM 0x00000040
+
+typedef struct {
+ int64_t fwi_version; /* major, minor, eco version */
+ int64_t fwi_totalmem; /* total installed mem */
+ int64_t fwi_flags; /* various flags */
+ int64_t fwi_boardid; /* board ID */
+ int64_t fwi_bootarea_va; /* VA of boot area */
+ int64_t fwi_bootarea_pa; /* PA of boot area */
+ int64_t fwi_bootarea_size; /* size of boot area */
+} cfe_fwinfo_t;
+
+
+/*
+ * Defines and prototypes for functions which take no arguments.
+ */
+int64_t cfe_getticks(void);
+
+/*
+ * Defines and prototypes for the rest of the functions.
+ */
+int cfe_close(int handle);
+int cfe_cpu_start(int cpu, void (*fn) (void), long sp, long gp, long a1);
+int cfe_cpu_stop(int cpu);
+int cfe_enumenv(int idx, char *name, int namelen, char *val, int vallen);
+int cfe_enummem(int idx, int flags, uint64_t * start, uint64_t * length,
+ uint64_t * type);
+int cfe_exit(int warm, int status);
+int cfe_flushcache(int flg);
+int cfe_getdevinfo(char *name);
+int cfe_getenv(char *name, char *dest, int destlen);
+int cfe_getfwinfo(cfe_fwinfo_t * info);
+int cfe_getstdhandle(int flg);
+int cfe_init(uint64_t handle, uint64_t ept);
+int cfe_inpstat(int handle);
+int cfe_ioctl(int handle, unsigned int ioctlnum, unsigned char *buffer,
+ int length, int *retlen, uint64_t offset);
+int cfe_open(char *name);
+int cfe_read(int handle, unsigned char *buffer, int length);
+int cfe_readblk(int handle, int64_t offset, unsigned char *buffer,
+ int length);
+int cfe_setenv(char *name, char *val);
+int cfe_write(int handle, unsigned char *buffer, int length);
+int cfe_writeblk(int handle, int64_t offset, unsigned char *buffer,
+ int length);
+
+#endif /* CFE_API_H */
diff --git a/arch/mips/include/asm/fw/cfe/cfe_error.h b/arch/mips/include/asm/fw/cfe/cfe_error.h
new file mode 100644
index 00000000000..b8037463627
--- /dev/null
+++ b/arch/mips/include/asm/fw/cfe/cfe_error.h
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 2000, 2001, 2002 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ * Broadcom Common Firmware Environment (CFE)
+ *
+ * CFE's global error code list is here.
+ *
+ * Author: Mitch Lichtenberg
+ */
+
+#define CFE_OK 0
+#define CFE_ERR -1 /* generic error */
+#define CFE_ERR_INV_COMMAND -2
+#define CFE_ERR_EOF -3
+#define CFE_ERR_IOERR -4
+#define CFE_ERR_NOMEM -5
+#define CFE_ERR_DEVNOTFOUND -6
+#define CFE_ERR_DEVOPEN -7
+#define CFE_ERR_INV_PARAM -8
+#define CFE_ERR_ENVNOTFOUND -9
+#define CFE_ERR_ENVREADONLY -10
+
+#define CFE_ERR_NOTELF -11
+#define CFE_ERR_NOT32BIT -12
+#define CFE_ERR_WRONGENDIAN -13
+#define CFE_ERR_BADELFVERS -14
+#define CFE_ERR_NOTMIPS -15
+#define CFE_ERR_BADELFFMT -16
+#define CFE_ERR_BADADDR -17
+
+#define CFE_ERR_FILENOTFOUND -18
+#define CFE_ERR_UNSUPPORTED -19
+
+#define CFE_ERR_HOSTUNKNOWN -20
+
+#define CFE_ERR_TIMEOUT -21
+
+#define CFE_ERR_PROTOCOLERR -22
+
+#define CFE_ERR_NETDOWN -23
+#define CFE_ERR_NONAMESERVER -24
+
+#define CFE_ERR_NOHANDLES -25
+#define CFE_ERR_ALREADYBOUND -26
+
+#define CFE_ERR_CANNOTSET -27
+#define CFE_ERR_NOMORE -28
+#define CFE_ERR_BADFILESYS -29
+#define CFE_ERR_FSNOTAVAIL -30
+
+#define CFE_ERR_INVBOOTBLOCK -31
+#define CFE_ERR_WRONGDEVTYPE -32
+#define CFE_ERR_BBCHECKSUM -33
+#define CFE_ERR_BOOTPROGCHKSUM -34
+
+#define CFE_ERR_LDRNOTAVAIL -35
+
+#define CFE_ERR_NOTREADY -36
+
+#define CFE_ERR_GETMEM -37
+#define CFE_ERR_SETMEM -38
+
+#define CFE_ERR_NOTCONN -39
+#define CFE_ERR_ADDRINUSE -40
diff --git a/arch/mips/include/asm/gcmpregs.h b/arch/mips/include/asm/gcmpregs.h
new file mode 100644
index 00000000000..d74a8a4ca86
--- /dev/null
+++ b/arch/mips/include/asm/gcmpregs.h
@@ -0,0 +1,117 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000, 07 MIPS Technologies, Inc.
+ *
+ * Multiprocessor Subsystem Register Definitions
+ *
+ */
+#ifndef _ASM_GCMPREGS_H
+#define _ASM_GCMPREGS_H
+
+
+/* Offsets to major blocks within GCMP from GCMP base */
+#define GCMP_GCB_OFS 0x0000 /* Global Control Block */
+#define GCMP_CLCB_OFS 0x2000 /* Core Local Control Block */
+#define GCMP_COCB_OFS 0x4000 /* Core Other Control Block */
+#define GCMP_GDB_OFS 0x8000 /* Global Debug Block */
+
+/* Offsets to individual GCMP registers from GCMP base */
+#define GCMPOFS(block, tag, reg) (GCMP_##block##_OFS + GCMP_##tag##_##reg##_OFS)
+
+#define GCMPGCBOFS(reg) GCMPOFS(GCB, GCB, reg)
+#define GCMPCLCBOFS(reg) GCMPOFS(CLCB, CCB, reg)
+#define GCMPCOCBOFS(reg) GCMPOFS(COCB, CCB, reg)
+#define GCMPGDBOFS(reg) GCMPOFS(GDB, GDB, reg)
+
+/* GCMP register access */
+#define GCMPGCB(reg) REGP(_gcmp_base, GCMPGCBOFS(reg))
+#define GCMPCLCB(reg) REGP(_gcmp_base, GCMPCLCBOFS(reg))
+#define GCMPCOCB(reg) REGP(_gcmp_base, GCMPCOCBOFS(reg))
+#define GCMPGDB(reg) REGP(_gcmp_base, GCMPGDBOFS(reg))
+
+/* Mask generation */
+#define GCMPMSK(block, reg, bits) (MSK(bits)<<GCMP_##block##_##reg##_SHF)
+#define GCMPGCBMSK(reg, bits) GCMPMSK(GCB, reg, bits)
+#define GCMPCCBMSK(reg, bits) GCMPMSK(CCB, reg, bits)
+#define GCMPGDBMSK(reg, bits) GCMPMSK(GDB, reg, bits)
+
+/* GCB registers */
+#define GCMP_GCB_GC_OFS 0x0000 /* Global Config Register */
+#define GCMP_GCB_GC_NUMIOCU_SHF 8
+#define GCMP_GCB_GC_NUMIOCU_MSK GCMPGCBMSK(GC_NUMIOCU, 4)
+#define GCMP_GCB_GC_NUMCORES_SHF 0
+#define GCMP_GCB_GC_NUMCORES_MSK GCMPGCBMSK(GC_NUMCORES, 8)
+#define GCMP_GCB_GCMPB_OFS 0x0008 /* Global GCMP Base */
+#define GCMP_GCB_GCMPB_GCMPBASE_SHF 15
+#define GCMP_GCB_GCMPB_GCMPBASE_MSK GCMPGCBMSK(GCMPB_GCMPBASE, 17)
+#define GCMP_GCB_GCMPB_CMDEFTGT_SHF 0
+#define GCMP_GCB_GCMPB_CMDEFTGT_MSK GCMPGCBMSK(GCMPB_CMDEFTGT, 2)
+#define GCMP_GCB_GCMPB_CMDEFTGT_MEM 0
+#define GCMP_GCB_GCMPB_CMDEFTGT_MEM1 1
+#define GCMP_GCB_GCMPB_CMDEFTGT_IOCU1 2
+#define GCMP_GCB_GCMPB_CMDEFTGT_IOCU2 3
+#define GCMP_GCB_CCMC_OFS 0x0010 /* Global CM Control */
+#define GCMP_GCB_GCSRAP_OFS 0x0020 /* Global CSR Access Privilege */
+#define GCMP_GCB_GCSRAP_CMACCESS_SHF 0
+#define GCMP_GCB_GCSRAP_CMACCESS_MSK GCMPGCBMSK(GCSRAP_CMACCESS, 8)
+#define GCMP_GCB_GCMPREV_OFS 0x0030 /* GCMP Revision Register */
+#define GCMP_GCB_GCMEM_OFS 0x0040 /* Global CM Error Mask */
+#define GCMP_GCB_GCMEC_OFS 0x0048 /* Global CM Error Cause */
+#define GCMP_GCB_GMEC_ERROR_TYPE_SHF 27
+#define GCMP_GCB_GMEC_ERROR_TYPE_MSK GCMPGCBMSK(GMEC_ERROR_TYPE, 5)
+#define GCMP_GCB_GMEC_ERROR_INFO_SHF 0
+#define GCMP_GCB_GMEC_ERROR_INFO_MSK GCMPGCBMSK(GMEC_ERROR_INFO, 27)
+#define GCMP_GCB_GCMEA_OFS 0x0050 /* Global CM Error Address */
+#define GCMP_GCB_GCMEO_OFS 0x0058 /* Global CM Error Multiple */
+#define GCMP_GCB_GMEO_ERROR_2ND_SHF 0
+#define GCMP_GCB_GMEO_ERROR_2ND_MSK GCMPGCBMSK(GMEO_ERROR_2ND, 5)
+#define GCMP_GCB_GICBA_OFS 0x0080 /* Global Interrupt Controller Base Address */
+#define GCMP_GCB_GICBA_BASE_SHF 17
+#define GCMP_GCB_GICBA_BASE_MSK GCMPGCBMSK(GICBA_BASE, 15)
+#define GCMP_GCB_GICBA_EN_SHF 0
+#define GCMP_GCB_GICBA_EN_MSK GCMPGCBMSK(GICBA_EN, 1)
+
+/* GCB Regions */
+#define GCMP_GCB_CMxBASE_OFS(n) (0x0090+16*(n)) /* Global Region[0-3] Base Address */
+#define GCMP_GCB_CMxBASE_BASE_SHF 16
+#define GCMP_GCB_CMxBASE_BASE_MSK GCMPGCBMSK(CMxBASE_BASE, 16)
+#define GCMP_GCB_CMxMASK_OFS(n) (0x0098+16*(n)) /* Global Region[0-3] Address Mask */
+#define GCMP_GCB_CMxMASK_MASK_SHF 16
+#define GCMP_GCB_CMxMASK_MASK_MSK GCMPGCBMSK(CMxMASK_MASK, 16)
+#define GCMP_GCB_CMxMASK_CMREGTGT_SHF 0
+#define GCMP_GCB_CMxMASK_CMREGTGT_MSK GCMPGCBMSK(CMxMASK_CMREGTGT, 2)
+#define GCMP_GCB_CMxMASK_CMREGTGT_MEM 0
+#define GCMP_GCB_CMxMASK_CMREGTGT_MEM1 1
+#define GCMP_GCB_CMxMASK_CMREGTGT_IOCU1 2
+#define GCMP_GCB_CMxMASK_CMREGTGT_IOCU2 3
+
+
+/* Core local/Core other control block registers */
+#define GCMP_CCB_RESETR_OFS 0x0000 /* Reset Release */
+#define GCMP_CCB_RESETR_INRESET_SHF 0
+#define GCMP_CCB_RESETR_INRESET_MSK GCMPCCBMSK(RESETR_INRESET, 16)
+#define GCMP_CCB_COHCTL_OFS 0x0008 /* Coherence Control */
+#define GCMP_CCB_COHCTL_DOMAIN_SHF 0
+#define GCMP_CCB_COHCTL_DOMAIN_MSK GCMPCCBMSK(COHCTL_DOMAIN, 8)
+#define GCMP_CCB_CFG_OFS 0x0010 /* Config */
+#define GCMP_CCB_CFG_IOCUTYPE_SHF 10
+#define GCMP_CCB_CFG_IOCUTYPE_MSK GCMPCCBMSK(CFG_IOCUTYPE, 2)
+#define GCMP_CCB_CFG_IOCUTYPE_CPU 0
+#define GCMP_CCB_CFG_IOCUTYPE_NCIOCU 1
+#define GCMP_CCB_CFG_IOCUTYPE_CIOCU 2
+#define GCMP_CCB_CFG_NUMVPE_SHF 0
+#define GCMP_CCB_CFG_NUMVPE_MSK GCMPCCBMSK(CFG_NUMVPE, 10)
+#define GCMP_CCB_OTHER_OFS 0x0018 /* Other Address */
+#define GCMP_CCB_OTHER_CORENUM_SHF 16
+#define GCMP_CCB_OTHER_CORENUM_MSK GCMPCCBMSK(OTHER_CORENUM, 16)
+#define GCMP_CCB_RESETBASE_OFS 0x0020 /* Reset Exception Base */
+#define GCMP_CCB_RESETBASE_BEV_SHF 12
+#define GCMP_CCB_RESETBASE_BEV_MSK GCMPCCBMSK(RESETBASE_BEV, 20)
+#define GCMP_CCB_ID_OFS 0x0028 /* Identification */
+#define GCMP_CCB_DINTGROUP_OFS 0x0030 /* DINT Group Participate */
+#define GCMP_CCB_DBGGROUP_OFS 0x0100 /* DebugBreak Group */
+
+#endif /* _ASM_GCMPREGS_H */
diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h
new file mode 100644
index 00000000000..954807d9d66
--- /dev/null
+++ b/arch/mips/include/asm/gic.h
@@ -0,0 +1,487 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000, 07 MIPS Technologies, Inc.
+ *
+ * GIC Register Definitions
+ *
+ */
+#ifndef _ASM_GICREGS_H
+#define _ASM_GICREGS_H
+
+#undef GICISBYTELITTLEENDIAN
+#define GICISWORDLITTLEENDIAN
+
+/* Constants */
+#define GIC_POL_POS 1
+#define GIC_POL_NEG 0
+#define GIC_TRIG_EDGE 1
+#define GIC_TRIG_LEVEL 0
+
+#define GIC_NUM_INTRS 32
+
+#define MSK(n) ((1 << (n)) - 1)
+#define REG32(addr) (*(volatile unsigned int *) (addr))
+#define REG(base, offs) REG32((unsigned long)(base) + offs##_##OFS)
+#define REGP(base, phys) REG32((unsigned long)(base) + (phys))
+
+/* Accessors */
+#define GIC_REG(segment, offset) \
+ REG32(_gic_base + segment##_##SECTION_OFS + offset##_##OFS)
+#define GIC_REG_ADDR(segment, offset) \
+ REG32(_gic_base + segment##_##SECTION_OFS + offset)
+
+#define GIC_ABS_REG(segment, offset) \
+ (_gic_base + segment##_##SECTION_OFS + offset##_##OFS)
+#define GIC_REG_ABS_ADDR(segment, offset) \
+ (_gic_base + segment##_##SECTION_OFS + offset)
+
+#ifdef GICISBYTELITTLEENDIAN
+#define GICREAD(reg, data) (data) = (reg), (data) = le32_to_cpu(data)
+#define GICWRITE(reg, data) (reg) = cpu_to_le32(data)
+#define GICBIS(reg, bits) \
+ ({unsigned int data; \
+ GICREAD(reg, data); \
+ data |= bits; \
+ GICWRITE(reg, data); \
+ })
+
+#else
+#define GICREAD(reg, data) (data) = (reg)
+#define GICWRITE(reg, data) (reg) = (data)
+#define GICBIS(reg, bits) (reg) |= (bits)
+#endif
+
+
+/* GIC Address Space */
+#define SHARED_SECTION_OFS 0x0000
+#define SHARED_SECTION_SIZE 0x8000
+#define VPE_LOCAL_SECTION_OFS 0x8000
+#define VPE_LOCAL_SECTION_SIZE 0x4000
+#define VPE_OTHER_SECTION_OFS 0xc000
+#define VPE_OTHER_SECTION_SIZE 0x4000
+#define USM_VISIBLE_SECTION_OFS 0x10000
+#define USM_VISIBLE_SECTION_SIZE 0x10000
+
+/* Register Map for Shared Section */
+#if defined(CONFIG_CPU_LITTLE_ENDIAN) || defined(GICISWORDLITTLEENDIAN)
+
+#define GIC_SH_CONFIG_OFS 0x0000
+
+/* Shared Global Counter */
+#define GIC_SH_COUNTER_31_00_OFS 0x0010
+#define GIC_SH_COUNTER_63_32_OFS 0x0014
+
+/* Interrupt Polarity */
+#define GIC_SH_POL_31_0_OFS 0x0100
+#define GIC_SH_POL_63_32_OFS 0x0104
+#define GIC_SH_POL_95_64_OFS 0x0108
+#define GIC_SH_POL_127_96_OFS 0x010c
+#define GIC_SH_POL_159_128_OFS 0x0110
+#define GIC_SH_POL_191_160_OFS 0x0114
+#define GIC_SH_POL_223_192_OFS 0x0118
+#define GIC_SH_POL_255_224_OFS 0x011c
+
+/* Edge/Level Triggering */
+#define GIC_SH_TRIG_31_0_OFS 0x0180
+#define GIC_SH_TRIG_63_32_OFS 0x0184
+#define GIC_SH_TRIG_95_64_OFS 0x0188
+#define GIC_SH_TRIG_127_96_OFS 0x018c
+#define GIC_SH_TRIG_159_128_OFS 0x0190
+#define GIC_SH_TRIG_191_160_OFS 0x0194
+#define GIC_SH_TRIG_223_192_OFS 0x0198
+#define GIC_SH_TRIG_255_224_OFS 0x019c
+
+/* Dual Edge Triggering */
+#define GIC_SH_DUAL_31_0_OFS 0x0200
+#define GIC_SH_DUAL_63_32_OFS 0x0204
+#define GIC_SH_DUAL_95_64_OFS 0x0208
+#define GIC_SH_DUAL_127_96_OFS 0x020c
+#define GIC_SH_DUAL_159_128_OFS 0x0210
+#define GIC_SH_DUAL_191_160_OFS 0x0214
+#define GIC_SH_DUAL_223_192_OFS 0x0218
+#define GIC_SH_DUAL_255_224_OFS 0x021c
+
+/* Set/Clear corresponding bit in Edge Detect Register */
+#define GIC_SH_WEDGE_OFS 0x0280
+
+/* Reset Mask - Disables Interrupt */
+#define GIC_SH_RMASK_31_0_OFS 0x0300
+#define GIC_SH_RMASK_63_32_OFS 0x0304
+#define GIC_SH_RMASK_95_64_OFS 0x0308
+#define GIC_SH_RMASK_127_96_OFS 0x030c
+#define GIC_SH_RMASK_159_128_OFS 0x0310
+#define GIC_SH_RMASK_191_160_OFS 0x0314
+#define GIC_SH_RMASK_223_192_OFS 0x0318
+#define GIC_SH_RMASK_255_224_OFS 0x031c
+
+/* Set Mask (WO) - Enables Interrupt */
+#define GIC_SH_SMASK_31_0_OFS 0x0380
+#define GIC_SH_SMASK_63_32_OFS 0x0384
+#define GIC_SH_SMASK_95_64_OFS 0x0388
+#define GIC_SH_SMASK_127_96_OFS 0x038c
+#define GIC_SH_SMASK_159_128_OFS 0x0390
+#define GIC_SH_SMASK_191_160_OFS 0x0394
+#define GIC_SH_SMASK_223_192_OFS 0x0398
+#define GIC_SH_SMASK_255_224_OFS 0x039c
+
+/* Global Interrupt Mask Register (RO) - Bit Set == Interrupt enabled */
+#define GIC_SH_MASK_31_0_OFS 0x0400
+#define GIC_SH_MASK_63_32_OFS 0x0404
+#define GIC_SH_MASK_95_64_OFS 0x0408
+#define GIC_SH_MASK_127_96_OFS 0x040c
+#define GIC_SH_MASK_159_128_OFS 0x0410
+#define GIC_SH_MASK_191_160_OFS 0x0414
+#define GIC_SH_MASK_223_192_OFS 0x0418
+#define GIC_SH_MASK_255_224_OFS 0x041c
+
+/* Pending Global Interrupts (RO) */
+#define GIC_SH_PEND_31_0_OFS 0x0480
+#define GIC_SH_PEND_63_32_OFS 0x0484
+#define GIC_SH_PEND_95_64_OFS 0x0488
+#define GIC_SH_PEND_127_96_OFS 0x048c
+#define GIC_SH_PEND_159_128_OFS 0x0490
+#define GIC_SH_PEND_191_160_OFS 0x0494
+#define GIC_SH_PEND_223_192_OFS 0x0498
+#define GIC_SH_PEND_255_224_OFS 0x049c
+
+#define GIC_SH_INTR_MAP_TO_PIN_BASE_OFS 0x0500
+
+/* Maps Interrupt X to a Pin */
+#define GIC_SH_MAP_TO_PIN(intr) \
+ (GIC_SH_INTR_MAP_TO_PIN_BASE_OFS + (4 * intr))
+
+#define GIC_SH_INTR_MAP_TO_VPE_BASE_OFS 0x2000
+
+/* Maps Interrupt X to a VPE */
+#define GIC_SH_MAP_TO_VPE_REG_OFF(intr, vpe) \
+ (GIC_SH_INTR_MAP_TO_VPE_BASE_OFS + (32 * (intr)) + (((vpe) / 32) * 4))
+#define GIC_SH_MAP_TO_VPE_REG_BIT(vpe) (1 << ((vpe) % 32))
+
+/* Polarity : Reset Value is always 0 */
+#define GIC_SH_SET_POLARITY_OFS 0x0100
+#define GIC_SET_POLARITY(intr, pol) \
+ GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_POLARITY_OFS + (((intr) / 32) * 4)), (pol) << ((intr) % 32))
+
+/* Triggering : Reset Value is always 0 */
+#define GIC_SH_SET_TRIGGER_OFS 0x0180
+#define GIC_SET_TRIGGER(intr, trig) \
+ GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_TRIGGER_OFS + (((intr) / 32) * 4)), (trig) << ((intr) % 32))
+
+/* Mask manipulation */
+#define GIC_SH_SMASK_OFS 0x0380
+#define GIC_SET_INTR_MASK(intr, val) \
+ GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_SMASK_OFS + (((intr) / 32) * 4)), ((val) << ((intr) % 32)))
+
+#define GIC_SH_RMASK_OFS 0x0300
+#define GIC_CLR_INTR_MASK(intr, val) \
+ GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_RMASK_OFS + (((intr) / 32) * 4)), ((val) << ((intr) % 32)))
+
+/* Register Map for Local Section */
+#define GIC_VPE_CTL_OFS 0x0000
+#define GIC_VPE_PEND_OFS 0x0004
+#define GIC_VPE_MASK_OFS 0x0008
+#define GIC_VPE_RMASK_OFS 0x000c
+#define GIC_VPE_SMASK_OFS 0x0010
+#define GIC_VPE_WD_MAP_OFS 0x0040
+#define GIC_VPE_COMPARE_MAP_OFS 0x0044
+#define GIC_VPE_TIMER_MAP_OFS 0x0048
+#define GIC_VPE_PERFCTR_MAP_OFS 0x0050
+#define GIC_VPE_SWINT0_MAP_OFS 0x0054
+#define GIC_VPE_SWINT1_MAP_OFS 0x0058
+#define GIC_VPE_OTHER_ADDR_OFS 0x0080
+#define GIC_VPE_WD_CONFIG0_OFS 0x0090
+#define GIC_VPE_WD_COUNT0_OFS 0x0094
+#define GIC_VPE_WD_INITIAL0_OFS 0x0098
+#define GIC_VPE_COMPARE_LO_OFS 0x00a0
+#define GIC_VPE_COMPARE_HI 0x00a4
+
+#define GIC_VPE_EIC_SHADOW_SET_BASE 0x0100
+#define GIC_VPE_EIC_SS(intr) \
+ (GIC_EIC_SHADOW_SET_BASE + (4 * intr))
+
+#define GIC_VPE_EIC_VEC_BASE 0x0800
+#define GIC_VPE_EIC_VEC(intr) \
+ (GIC_VPE_EIC_VEC_BASE + (4 * intr))
+
+#define GIC_VPE_TENABLE_NMI_OFS 0x1000
+#define GIC_VPE_TENABLE_YQ_OFS 0x1004
+#define GIC_VPE_TENABLE_INT_31_0_OFS 0x1080
+#define GIC_VPE_TENABLE_INT_63_32_OFS 0x1084
+
+/* User Mode Visible Section Register Map */
+#define GIC_UMV_SH_COUNTER_31_00_OFS 0x0000
+#define GIC_UMV_SH_COUNTER_63_32_OFS 0x0004
+
+#else /* CONFIG_CPU_BIG_ENDIAN */
+
+#define GIC_SH_CONFIG_OFS 0x0000
+
+/* Shared Global Counter */
+#define GIC_SH_COUNTER_31_00_OFS 0x0014
+#define GIC_SH_COUNTER_63_32_OFS 0x0010
+
+/* Interrupt Polarity */
+#define GIC_SH_POL_31_0_OFS 0x0104
+#define GIC_SH_POL_63_32_OFS 0x0100
+#define GIC_SH_POL_95_64_OFS 0x010c
+#define GIC_SH_POL_127_96_OFS 0x0108
+#define GIC_SH_POL_159_128_OFS 0x0114
+#define GIC_SH_POL_191_160_OFS 0x0110
+#define GIC_SH_POL_223_192_OFS 0x011c
+#define GIC_SH_POL_255_224_OFS 0x0118
+
+/* Edge/Level Triggering */
+#define GIC_SH_TRIG_31_0_OFS 0x0184
+#define GIC_SH_TRIG_63_32_OFS 0x0180
+#define GIC_SH_TRIG_95_64_OFS 0x018c
+#define GIC_SH_TRIG_127_96_OFS 0x0188
+#define GIC_SH_TRIG_159_128_OFS 0x0194
+#define GIC_SH_TRIG_191_160_OFS 0x0190
+#define GIC_SH_TRIG_223_192_OFS 0x019c
+#define GIC_SH_TRIG_255_224_OFS 0x0198
+
+/* Dual Edge Triggering */
+#define GIC_SH_DUAL_31_0_OFS 0x0204
+#define GIC_SH_DUAL_63_32_OFS 0x0200
+#define GIC_SH_DUAL_95_64_OFS 0x020c
+#define GIC_SH_DUAL_127_96_OFS 0x0208
+#define GIC_SH_DUAL_159_128_OFS 0x0214
+#define GIC_SH_DUAL_191_160_OFS 0x0210
+#define GIC_SH_DUAL_223_192_OFS 0x021c
+#define GIC_SH_DUAL_255_224_OFS 0x0218
+
+/* Set/Clear corresponding bit in Edge Detect Register */
+#define GIC_SH_WEDGE_OFS 0x0280
+
+/* Reset Mask - Disables Interrupt */
+#define GIC_SH_RMASK_31_0_OFS 0x0304
+#define GIC_SH_RMASK_63_32_OFS 0x0300
+#define GIC_SH_RMASK_95_64_OFS 0x030c
+#define GIC_SH_RMASK_127_96_OFS 0x0308
+#define GIC_SH_RMASK_159_128_OFS 0x0314
+#define GIC_SH_RMASK_191_160_OFS 0x0310
+#define GIC_SH_RMASK_223_192_OFS 0x031c
+#define GIC_SH_RMASK_255_224_OFS 0x0318
+
+/* Set Mask (WO) - Enables Interrupt */
+#define GIC_SH_SMASK_31_0_OFS 0x0384
+#define GIC_SH_SMASK_63_32_OFS 0x0380
+#define GIC_SH_SMASK_95_64_OFS 0x038c
+#define GIC_SH_SMASK_127_96_OFS 0x0388
+#define GIC_SH_SMASK_159_128_OFS 0x0394
+#define GIC_SH_SMASK_191_160_OFS 0x0390
+#define GIC_SH_SMASK_223_192_OFS 0x039c
+#define GIC_SH_SMASK_255_224_OFS 0x0398
+
+/* Global Interrupt Mask Register (RO) - Bit Set == Interrupt enabled */
+#define GIC_SH_MASK_31_0_OFS 0x0404
+#define GIC_SH_MASK_63_32_OFS 0x0400
+#define GIC_SH_MASK_95_64_OFS 0x040c
+#define GIC_SH_MASK_127_96_OFS 0x0408
+#define GIC_SH_MASK_159_128_OFS 0x0414
+#define GIC_SH_MASK_191_160_OFS 0x0410
+#define GIC_SH_MASK_223_192_OFS 0x041c
+#define GIC_SH_MASK_255_224_OFS 0x0418
+
+/* Pending Global Interrupts (RO) */
+#define GIC_SH_PEND_31_0_OFS 0x0484
+#define GIC_SH_PEND_63_32_OFS 0x0480
+#define GIC_SH_PEND_95_64_OFS 0x048c
+#define GIC_SH_PEND_127_96_OFS 0x0488
+#define GIC_SH_PEND_159_128_OFS 0x0494
+#define GIC_SH_PEND_191_160_OFS 0x0490
+#define GIC_SH_PEND_223_192_OFS 0x049c
+#define GIC_SH_PEND_255_224_OFS 0x0498
+
+#define GIC_SH_INTR_MAP_TO_PIN_BASE_OFS 0x0500
+
+/* Maps Interrupt X to a Pin */
+#define GIC_SH_MAP_TO_PIN(intr) \
+ (GIC_SH_INTR_MAP_TO_PIN_BASE_OFS + (4 * intr))
+
+#define GIC_SH_INTR_MAP_TO_VPE_BASE_OFS 0x2004
+
+/*
+ * Maps Interrupt X to a VPE. This is more complex than the LE case, as
+ * odd and even registers need to be transposed. It does work - trust me!
+ */
+#define GIC_SH_MAP_TO_VPE_REG_OFF(intr, vpe) \
+ (GIC_SH_INTR_MAP_TO_VPE_BASE_OFS + (32 * (intr)) + \
+ (((((vpe) / 32) ^ 1) - 1) * 4))
+#define GIC_SH_MAP_TO_VPE_REG_BIT(vpe) (1 << ((vpe) % 32))
+
+/* Polarity */
+#define GIC_SH_SET_POLARITY_OFS 0x0100
+#define GIC_SET_POLARITY(intr, pol) \
+ GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_POLARITY_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), (pol) << ((intr) % 32))
+
+/* Triggering */
+#define GIC_SH_SET_TRIGGER_OFS 0x0180
+#define GIC_SET_TRIGGER(intr, trig) \
+ GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_TRIGGER_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), (trig) << ((intr) % 32))
+
+/* Mask manipulation */
+#define GIC_SH_SMASK_OFS 0x0380
+#define GIC_SET_INTR_MASK(intr, val) \
+ GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_SMASK_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), ((val) << ((intr) % 32)))
+
+#define GIC_SH_RMASK_OFS 0x0300
+#define GIC_CLR_INTR_MASK(intr, val) \
+ GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_RMASK_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), ((val) << ((intr) % 32)))
+
+/* Register Map for Local Section */
+#define GIC_VPE_CTL_OFS 0x0000
+#define GIC_VPE_PEND_OFS 0x0004
+#define GIC_VPE_MASK_OFS 0x0008
+#define GIC_VPE_RMASK_OFS 0x000c
+#define GIC_VPE_SMASK_OFS 0x0010
+#define GIC_VPE_WD_MAP_OFS 0x0040
+#define GIC_VPE_COMPARE_MAP_OFS 0x0044
+#define GIC_VPE_TIMER_MAP_OFS 0x0048
+#define GIC_VPE_PERFCTR_MAP_OFS 0x0050
+#define GIC_VPE_SWINT0_MAP_OFS 0x0054
+#define GIC_VPE_SWINT1_MAP_OFS 0x0058
+#define GIC_VPE_OTHER_ADDR_OFS 0x0080
+#define GIC_VPE_WD_CONFIG0_OFS 0x0090
+#define GIC_VPE_WD_COUNT0_OFS 0x0094
+#define GIC_VPE_WD_INITIAL0_OFS 0x0098
+#define GIC_VPE_COMPARE_LO_OFS 0x00a4
+#define GIC_VPE_COMPARE_HI_OFS 0x00a0
+
+#define GIC_VPE_EIC_SHADOW_SET_BASE 0x0100
+#define GIC_VPE_EIC_SS(intr) \
+ (GIC_EIC_SHADOW_SET_BASE + (4 * intr))
+
+#define GIC_VPE_EIC_VEC_BASE 0x0800
+#define GIC_VPE_EIC_VEC(intr) \
+ (GIC_VPE_EIC_VEC_BASE + (4 * intr))
+
+#define GIC_VPE_TENABLE_NMI_OFS 0x1000
+#define GIC_VPE_TENABLE_YQ_OFS 0x1004
+#define GIC_VPE_TENABLE_INT_31_0_OFS 0x1080
+#define GIC_VPE_TENABLE_INT_63_32_OFS 0x1084
+
+/* User Mode Visible Section Register Map */
+#define GIC_UMV_SH_COUNTER_31_00_OFS 0x0004
+#define GIC_UMV_SH_COUNTER_63_32_OFS 0x0000
+
+#endif /* !LE */
+
+/* Masks */
+#define GIC_SH_CONFIG_COUNTSTOP_SHF 28
+#define GIC_SH_CONFIG_COUNTSTOP_MSK (MSK(1) << GIC_SH_CONFIG_COUNTSTOP_SHF)
+
+#define GIC_SH_CONFIG_COUNTBITS_SHF 24
+#define GIC_SH_CONFIG_COUNTBITS_MSK (MSK(4) << GIC_SH_CONFIG_COUNTBITS_SHF)
+
+#define GIC_SH_CONFIG_NUMINTRS_SHF 16
+#define GIC_SH_CONFIG_NUMINTRS_MSK (MSK(8) << GIC_SH_CONFIG_NUMINTRS_SHF)
+
+#define GIC_SH_CONFIG_NUMVPES_SHF 0
+#define GIC_SH_CONFIG_NUMVPES_MSK (MSK(8) << GIC_SH_CONFIG_NUMVPES_SHF)
+
+#define GIC_SH_WEDGE_SET(intr) (intr | (0x1 << 31))
+#define GIC_SH_WEDGE_CLR(intr) (intr & ~(0x1 << 31))
+
+#define GIC_MAP_TO_PIN_SHF 31
+#define GIC_MAP_TO_PIN_MSK (MSK(1) << GIC_MAP_TO_PIN_SHF)
+#define GIC_MAP_TO_NMI_SHF 30
+#define GIC_MAP_TO_NMI_MSK (MSK(1) << GIC_MAP_TO_NMI_SHF)
+#define GIC_MAP_TO_YQ_SHF 29
+#define GIC_MAP_TO_YQ_MSK (MSK(1) << GIC_MAP_TO_YQ_SHF)
+#define GIC_MAP_SHF 0
+#define GIC_MAP_MSK (MSK(6) << GIC_MAP_SHF)
+
+/* GIC_VPE_CTL Masks */
+#define GIC_VPE_CTL_PERFCNT_RTBL_SHF 2
+#define GIC_VPE_CTL_PERFCNT_RTBL_MSK (MSK(1) << GIC_VPE_CTL_PERFCNT_RTBL_SHF)
+#define GIC_VPE_CTL_TIMER_RTBL_SHF 1
+#define GIC_VPE_CTL_TIMER_RTBL_MSK (MSK(1) << GIC_VPE_CTL_TIMER_RTBL_SHF)
+#define GIC_VPE_CTL_EIC_MODE_SHF 0
+#define GIC_VPE_CTL_EIC_MODE_MSK (MSK(1) << GIC_VPE_CTL_EIC_MODE_SHF)
+
+/* GIC_VPE_PEND Masks */
+#define GIC_VPE_PEND_WD_SHF 0
+#define GIC_VPE_PEND_WD_MSK (MSK(1) << GIC_VPE_PEND_WD_SHF)
+#define GIC_VPE_PEND_CMP_SHF 1
+#define GIC_VPE_PEND_CMP_MSK (MSK(1) << GIC_VPE_PEND_CMP_SHF)
+#define GIC_VPE_PEND_TIMER_SHF 2
+#define GIC_VPE_PEND_TIMER_MSK (MSK(1) << GIC_VPE_PEND_TIMER_SHF)
+#define GIC_VPE_PEND_PERFCOUNT_SHF 3
+#define GIC_VPE_PEND_PERFCOUNT_MSK (MSK(1) << GIC_VPE_PEND_PERFCOUNT_SHF)
+#define GIC_VPE_PEND_SWINT0_SHF 4
+#define GIC_VPE_PEND_SWINT0_MSK (MSK(1) << GIC_VPE_PEND_SWINT0_SHF)
+#define GIC_VPE_PEND_SWINT1_SHF 5
+#define GIC_VPE_PEND_SWINT1_MSK (MSK(1) << GIC_VPE_PEND_SWINT1_SHF)
+
+/* GIC_VPE_RMASK Masks */
+#define GIC_VPE_RMASK_WD_SHF 0
+#define GIC_VPE_RMASK_WD_MSK (MSK(1) << GIC_VPE_RMASK_WD_SHF)
+#define GIC_VPE_RMASK_CMP_SHF 1
+#define GIC_VPE_RMASK_CMP_MSK (MSK(1) << GIC_VPE_RMASK_CMP_SHF)
+#define GIC_VPE_RMASK_TIMER_SHF 2
+#define GIC_VPE_RMASK_TIMER_MSK (MSK(1) << GIC_VPE_RMASK_TIMER_SHF)
+#define GIC_VPE_RMASK_PERFCNT_SHF 3
+#define GIC_VPE_RMASK_PERFCNT_MSK (MSK(1) << GIC_VPE_RMASK_PERFCNT_SHF)
+#define GIC_VPE_RMASK_SWINT0_SHF 4
+#define GIC_VPE_RMASK_SWINT0_MSK (MSK(1) << GIC_VPE_RMASK_SWINT0_SHF)
+#define GIC_VPE_RMASK_SWINT1_SHF 5
+#define GIC_VPE_RMASK_SWINT1_MSK (MSK(1) << GIC_VPE_RMASK_SWINT1_SHF)
+
+/* GIC_VPE_SMASK Masks */
+#define GIC_VPE_SMASK_WD_SHF 0
+#define GIC_VPE_SMASK_WD_MSK (MSK(1) << GIC_VPE_SMASK_WD_SHF)
+#define GIC_VPE_SMASK_CMP_SHF 1
+#define GIC_VPE_SMASK_CMP_MSK (MSK(1) << GIC_VPE_SMASK_CMP_SHF)
+#define GIC_VPE_SMASK_TIMER_SHF 2
+#define GIC_VPE_SMASK_TIMER_MSK (MSK(1) << GIC_VPE_SMASK_TIMER_SHF)
+#define GIC_VPE_SMASK_PERFCNT_SHF 3
+#define GIC_VPE_SMASK_PERFCNT_MSK (MSK(1) << GIC_VPE_SMASK_PERFCNT_SHF)
+#define GIC_VPE_SMASK_SWINT0_SHF 4
+#define GIC_VPE_SMASK_SWINT0_MSK (MSK(1) << GIC_VPE_SMASK_SWINT0_SHF)
+#define GIC_VPE_SMASK_SWINT1_SHF 5
+#define GIC_VPE_SMASK_SWINT1_MSK (MSK(1) << GIC_VPE_SMASK_SWINT1_SHF)
+
+/*
+ * Set the Mapping of Interrupt X to a VPE.
+ */
+#define GIC_SH_MAP_TO_VPE_SMASK(intr, vpe) \
+ GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_MAP_TO_VPE_REG_OFF(intr, vpe)), \
+ GIC_SH_MAP_TO_VPE_REG_BIT(vpe))
+
+struct gic_pcpu_mask {
+ DECLARE_BITMAP(pcpu_mask, GIC_NUM_INTRS);
+};
+
+struct gic_pending_regs {
+ DECLARE_BITMAP(pending, GIC_NUM_INTRS);
+};
+
+struct gic_intrmask_regs {
+ DECLARE_BITMAP(intrmask, GIC_NUM_INTRS);
+};
+
+/*
+ * Interrupt Meta-data specification. The ipiflag helps
+ * in building ipi_map.
+ */
+struct gic_intr_map {
+ unsigned int intrnum; /* Ext Intr Num */
+ unsigned int cpunum; /* Directed to this CPU */
+ unsigned int pin; /* Directed to this Pin */
+ unsigned int polarity; /* Polarity : +/- */
+ unsigned int trigtype; /* Trigger : Edge/Levl */
+ unsigned int ipiflag; /* Is used for IPI ? */
+};
+
+extern void gic_init(unsigned long gic_base_addr,
+ unsigned long gic_addrspace_size, struct gic_intr_map *intrmap,
+ unsigned int intrmap_size, unsigned int irqbase);
+
+extern unsigned int gic_get_int(void);
+extern void gic_send_ipi(unsigned int intr);
+
+#endif /* _ASM_GICREGS_H */
diff --git a/arch/mips/include/asm/gpio.h b/arch/mips/include/asm/gpio.h
new file mode 100644
index 00000000000..06e46faf862
--- /dev/null
+++ b/arch/mips/include/asm/gpio.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_MIPS_GPIO_H
+#define __ASM_MIPS_GPIO_H
+
+#include <gpio.h>
+
+#endif /* __ASM_MIPS_GPIO_H */
diff --git a/arch/mips/include/asm/gt64120.h b/arch/mips/include/asm/gt64120.h
new file mode 100644
index 00000000000..e64b41093c4
--- /dev/null
+++ b/arch/mips/include/asm/gt64120.h
@@ -0,0 +1,580 @@
+/*
+ * Copyright (C) 2000, 2004, 2005 MIPS Technologies, Inc.
+ * All rights reserved.
+ * Authors: Carsten Langgaard <carstenl@mips.com>
+ * Maciej W. Rozycki <macro@mips.com>
+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#ifndef _ASM_GT64120_H
+#define _ASM_GT64120_H
+
+#include <linux/clocksource.h>
+
+#include <asm/addrspace.h>
+#include <asm/byteorder.h>
+
+#define MSK(n) ((1 << (n)) - 1)
+
+/*
+ * Register offset addresses
+ */
+/* CPU Configuration. */
+#define GT_CPU_OFS 0x000
+
+#define GT_MULTI_OFS 0x120
+
+/* CPU Address Decode. */
+#define GT_SCS10LD_OFS 0x008
+#define GT_SCS10HD_OFS 0x010
+#define GT_SCS32LD_OFS 0x018
+#define GT_SCS32HD_OFS 0x020
+#define GT_CS20LD_OFS 0x028
+#define GT_CS20HD_OFS 0x030
+#define GT_CS3BOOTLD_OFS 0x038
+#define GT_CS3BOOTHD_OFS 0x040
+#define GT_PCI0IOLD_OFS 0x048
+#define GT_PCI0IOHD_OFS 0x050
+#define GT_PCI0M0LD_OFS 0x058
+#define GT_PCI0M0HD_OFS 0x060
+#define GT_ISD_OFS 0x068
+
+#define GT_PCI0M1LD_OFS 0x080
+#define GT_PCI0M1HD_OFS 0x088
+#define GT_PCI1IOLD_OFS 0x090
+#define GT_PCI1IOHD_OFS 0x098
+#define GT_PCI1M0LD_OFS 0x0a0
+#define GT_PCI1M0HD_OFS 0x0a8
+#define GT_PCI1M1LD_OFS 0x0b0
+#define GT_PCI1M1HD_OFS 0x0b8
+#define GT_PCI1M1LD_OFS 0x0b0
+#define GT_PCI1M1HD_OFS 0x0b8
+
+#define GT_SCS10AR_OFS 0x0d0
+#define GT_SCS32AR_OFS 0x0d8
+#define GT_CS20R_OFS 0x0e0
+#define GT_CS3BOOTR_OFS 0x0e8
+
+#define GT_PCI0IOREMAP_OFS 0x0f0
+#define GT_PCI0M0REMAP_OFS 0x0f8
+#define GT_PCI0M1REMAP_OFS 0x100
+#define GT_PCI1IOREMAP_OFS 0x108
+#define GT_PCI1M0REMAP_OFS 0x110
+#define GT_PCI1M1REMAP_OFS 0x118
+
+/* CPU Error Report. */
+#define GT_CPUERR_ADDRLO_OFS 0x070
+#define GT_CPUERR_ADDRHI_OFS 0x078
+
+#define GT_CPUERR_DATALO_OFS 0x128 /* GT-64120A only */
+#define GT_CPUERR_DATAHI_OFS 0x130 /* GT-64120A only */
+#define GT_CPUERR_PARITY_OFS 0x138 /* GT-64120A only */
+
+/* CPU Sync Barrier. */
+#define GT_PCI0SYNC_OFS 0x0c0
+#define GT_PCI1SYNC_OFS 0x0c8
+
+/* SDRAM and Device Address Decode. */
+#define GT_SCS0LD_OFS 0x400
+#define GT_SCS0HD_OFS 0x404
+#define GT_SCS1LD_OFS 0x408
+#define GT_SCS1HD_OFS 0x40c
+#define GT_SCS2LD_OFS 0x410
+#define GT_SCS2HD_OFS 0x414
+#define GT_SCS3LD_OFS 0x418
+#define GT_SCS3HD_OFS 0x41c
+#define GT_CS0LD_OFS 0x420
+#define GT_CS0HD_OFS 0x424
+#define GT_CS1LD_OFS 0x428
+#define GT_CS1HD_OFS 0x42c
+#define GT_CS2LD_OFS 0x430
+#define GT_CS2HD_OFS 0x434
+#define GT_CS3LD_OFS 0x438
+#define GT_CS3HD_OFS 0x43c
+#define GT_BOOTLD_OFS 0x440
+#define GT_BOOTHD_OFS 0x444
+
+#define GT_ADERR_OFS 0x470
+
+/* SDRAM Configuration. */
+#define GT_SDRAM_CFG_OFS 0x448
+
+#define GT_SDRAM_OPMODE_OFS 0x474
+#define GT_SDRAM_BM_OFS 0x478
+#define GT_SDRAM_ADDRDECODE_OFS 0x47c
+
+/* SDRAM Parameters. */
+#define GT_SDRAM_B0_OFS 0x44c
+#define GT_SDRAM_B1_OFS 0x450
+#define GT_SDRAM_B2_OFS 0x454
+#define GT_SDRAM_B3_OFS 0x458
+
+/* Device Parameters. */
+#define GT_DEV_B0_OFS 0x45c
+#define GT_DEV_B1_OFS 0x460
+#define GT_DEV_B2_OFS 0x464
+#define GT_DEV_B3_OFS 0x468
+#define GT_DEV_BOOT_OFS 0x46c
+
+/* ECC. */
+#define GT_ECC_ERRDATALO 0x480 /* GT-64120A only */
+#define GT_ECC_ERRDATAHI 0x484 /* GT-64120A only */
+#define GT_ECC_MEM 0x488 /* GT-64120A only */
+#define GT_ECC_CALC 0x48c /* GT-64120A only */
+#define GT_ECC_ERRADDR 0x490 /* GT-64120A only */
+
+/* DMA Record. */
+#define GT_DMA0_CNT_OFS 0x800
+#define GT_DMA1_CNT_OFS 0x804
+#define GT_DMA2_CNT_OFS 0x808
+#define GT_DMA3_CNT_OFS 0x80c
+#define GT_DMA0_SA_OFS 0x810
+#define GT_DMA1_SA_OFS 0x814
+#define GT_DMA2_SA_OFS 0x818
+#define GT_DMA3_SA_OFS 0x81c
+#define GT_DMA0_DA_OFS 0x820
+#define GT_DMA1_DA_OFS 0x824
+#define GT_DMA2_DA_OFS 0x828
+#define GT_DMA3_DA_OFS 0x82c
+#define GT_DMA0_NEXT_OFS 0x830
+#define GT_DMA1_NEXT_OFS 0x834
+#define GT_DMA2_NEXT_OFS 0x838
+#define GT_DMA3_NEXT_OFS 0x83c
+
+#define GT_DMA0_CUR_OFS 0x870
+#define GT_DMA1_CUR_OFS 0x874
+#define GT_DMA2_CUR_OFS 0x878
+#define GT_DMA3_CUR_OFS 0x87c
+
+/* DMA Channel Control. */
+#define GT_DMA0_CTRL_OFS 0x840
+#define GT_DMA1_CTRL_OFS 0x844
+#define GT_DMA2_CTRL_OFS 0x848
+#define GT_DMA3_CTRL_OFS 0x84c
+
+/* DMA Arbiter. */
+#define GT_DMA_ARB_OFS 0x860
+
+/* Timer/Counter. */
+#define GT_TC0_OFS 0x850
+#define GT_TC1_OFS 0x854
+#define GT_TC2_OFS 0x858
+#define GT_TC3_OFS 0x85c
+
+#define GT_TC_CONTROL_OFS 0x864
+
+/* PCI Internal. */
+#define GT_PCI0_CMD_OFS 0xc00
+#define GT_PCI0_TOR_OFS 0xc04
+#define GT_PCI0_BS_SCS10_OFS 0xc08
+#define GT_PCI0_BS_SCS32_OFS 0xc0c
+#define GT_PCI0_BS_CS20_OFS 0xc10
+#define GT_PCI0_BS_CS3BT_OFS 0xc14
+
+#define GT_PCI1_IACK_OFS 0xc30
+#define GT_PCI0_IACK_OFS 0xc34
+
+#define GT_PCI0_BARE_OFS 0xc3c
+#define GT_PCI0_PREFMBR_OFS 0xc40
+
+#define GT_PCI0_SCS10_BAR_OFS 0xc48
+#define GT_PCI0_SCS32_BAR_OFS 0xc4c
+#define GT_PCI0_CS20_BAR_OFS 0xc50
+#define GT_PCI0_CS3BT_BAR_OFS 0xc54
+#define GT_PCI0_SSCS10_BAR_OFS 0xc58
+#define GT_PCI0_SSCS32_BAR_OFS 0xc5c
+
+#define GT_PCI0_SCS3BT_BAR_OFS 0xc64
+
+#define GT_PCI1_CMD_OFS 0xc80
+#define GT_PCI1_TOR_OFS 0xc84
+#define GT_PCI1_BS_SCS10_OFS 0xc88
+#define GT_PCI1_BS_SCS32_OFS 0xc8c
+#define GT_PCI1_BS_CS20_OFS 0xc90
+#define GT_PCI1_BS_CS3BT_OFS 0xc94
+
+#define GT_PCI1_BARE_OFS 0xcbc
+#define GT_PCI1_PREFMBR_OFS 0xcc0
+
+#define GT_PCI1_SCS10_BAR_OFS 0xcc8
+#define GT_PCI1_SCS32_BAR_OFS 0xccc
+#define GT_PCI1_CS20_BAR_OFS 0xcd0
+#define GT_PCI1_CS3BT_BAR_OFS 0xcd4
+#define GT_PCI1_SSCS10_BAR_OFS 0xcd8
+#define GT_PCI1_SSCS32_BAR_OFS 0xcdc
+
+#define GT_PCI1_SCS3BT_BAR_OFS 0xce4
+
+#define GT_PCI1_CFGADDR_OFS 0xcf0
+#define GT_PCI1_CFGDATA_OFS 0xcf4
+#define GT_PCI0_CFGADDR_OFS 0xcf8
+#define GT_PCI0_CFGDATA_OFS 0xcfc
+
+/* Interrupts. */
+#define GT_INTRCAUSE_OFS 0xc18
+#define GT_INTRMASK_OFS 0xc1c
+
+#define GT_PCI0_ICMASK_OFS 0xc24
+#define GT_PCI0_SERR0MASK_OFS 0xc28
+
+#define GT_CPU_INTSEL_OFS 0xc70
+#define GT_PCI0_INTSEL_OFS 0xc74
+
+#define GT_HINTRCAUSE_OFS 0xc98
+#define GT_HINTRMASK_OFS 0xc9c
+
+#define GT_PCI0_HICMASK_OFS 0xca4
+#define GT_PCI1_SERR1MASK_OFS 0xca8
+
+
+/*
+ * I2O Support Registers
+ */
+#define INBOUND_MESSAGE_REGISTER0_PCI_SIDE 0x010
+#define INBOUND_MESSAGE_REGISTER1_PCI_SIDE 0x014
+#define OUTBOUND_MESSAGE_REGISTER0_PCI_SIDE 0x018
+#define OUTBOUND_MESSAGE_REGISTER1_PCI_SIDE 0x01c
+#define INBOUND_DOORBELL_REGISTER_PCI_SIDE 0x020
+#define INBOUND_INTERRUPT_CAUSE_REGISTER_PCI_SIDE 0x024
+#define INBOUND_INTERRUPT_MASK_REGISTER_PCI_SIDE 0x028
+#define OUTBOUND_DOORBELL_REGISTER_PCI_SIDE 0x02c
+#define OUTBOUND_INTERRUPT_CAUSE_REGISTER_PCI_SIDE 0x030
+#define OUTBOUND_INTERRUPT_MASK_REGISTER_PCI_SIDE 0x034
+#define INBOUND_QUEUE_PORT_VIRTUAL_REGISTER_PCI_SIDE 0x040
+#define OUTBOUND_QUEUE_PORT_VIRTUAL_REGISTER_PCI_SIDE 0x044
+#define QUEUE_CONTROL_REGISTER_PCI_SIDE 0x050
+#define QUEUE_BASE_ADDRESS_REGISTER_PCI_SIDE 0x054
+#define INBOUND_FREE_HEAD_POINTER_REGISTER_PCI_SIDE 0x060
+#define INBOUND_FREE_TAIL_POINTER_REGISTER_PCI_SIDE 0x064
+#define INBOUND_POST_HEAD_POINTER_REGISTER_PCI_SIDE 0x068
+#define INBOUND_POST_TAIL_POINTER_REGISTER_PCI_SIDE 0x06c
+#define OUTBOUND_FREE_HEAD_POINTER_REGISTER_PCI_SIDE 0x070
+#define OUTBOUND_FREE_TAIL_POINTER_REGISTER_PCI_SIDE 0x074
+#define OUTBOUND_POST_HEAD_POINTER_REGISTER_PCI_SIDE 0x078
+#define OUTBOUND_POST_TAIL_POINTER_REGISTER_PCI_SIDE 0x07c
+
+#define INBOUND_MESSAGE_REGISTER0_CPU_SIDE 0x1c10
+#define INBOUND_MESSAGE_REGISTER1_CPU_SIDE 0x1c14
+#define OUTBOUND_MESSAGE_REGISTER0_CPU_SIDE 0x1c18
+#define OUTBOUND_MESSAGE_REGISTER1_CPU_SIDE 0x1c1c
+#define INBOUND_DOORBELL_REGISTER_CPU_SIDE 0x1c20
+#define INBOUND_INTERRUPT_CAUSE_REGISTER_CPU_SIDE 0x1c24
+#define INBOUND_INTERRUPT_MASK_REGISTER_CPU_SIDE 0x1c28
+#define OUTBOUND_DOORBELL_REGISTER_CPU_SIDE 0x1c2c
+#define OUTBOUND_INTERRUPT_CAUSE_REGISTER_CPU_SIDE 0x1c30
+#define OUTBOUND_INTERRUPT_MASK_REGISTER_CPU_SIDE 0x1c34
+#define INBOUND_QUEUE_PORT_VIRTUAL_REGISTER_CPU_SIDE 0x1c40
+#define OUTBOUND_QUEUE_PORT_VIRTUAL_REGISTER_CPU_SIDE 0x1c44
+#define QUEUE_CONTROL_REGISTER_CPU_SIDE 0x1c50
+#define QUEUE_BASE_ADDRESS_REGISTER_CPU_SIDE 0x1c54
+#define INBOUND_FREE_HEAD_POINTER_REGISTER_CPU_SIDE 0x1c60
+#define INBOUND_FREE_TAIL_POINTER_REGISTER_CPU_SIDE 0x1c64
+#define INBOUND_POST_HEAD_POINTER_REGISTER_CPU_SIDE 0x1c68
+#define INBOUND_POST_TAIL_POINTER_REGISTER_CPU_SIDE 0x1c6c
+#define OUTBOUND_FREE_HEAD_POINTER_REGISTER_CPU_SIDE 0x1c70
+#define OUTBOUND_FREE_TAIL_POINTER_REGISTER_CPU_SIDE 0x1c74
+#define OUTBOUND_POST_HEAD_POINTER_REGISTER_CPU_SIDE 0x1c78
+#define OUTBOUND_POST_TAIL_POINTER_REGISTER_CPU_SIDE 0x1c7c
+
+/*
+ * Register encodings
+ */
+#define GT_CPU_ENDIAN_SHF 12
+#define GT_CPU_ENDIAN_MSK (MSK(1) << GT_CPU_ENDIAN_SHF)
+#define GT_CPU_ENDIAN_BIT GT_CPU_ENDIAN_MSK
+#define GT_CPU_WR_SHF 16
+#define GT_CPU_WR_MSK (MSK(1) << GT_CPU_WR_SHF)
+#define GT_CPU_WR_BIT GT_CPU_WR_MSK
+#define GT_CPU_WR_DXDXDXDX 0
+#define GT_CPU_WR_DDDD 1
+
+
+#define GT_PCI_DCRM_SHF 21
+#define GT_PCI_LD_SHF 0
+#define GT_PCI_LD_MSK (MSK(15) << GT_PCI_LD_SHF)
+#define GT_PCI_HD_SHF 0
+#define GT_PCI_HD_MSK (MSK(7) << GT_PCI_HD_SHF)
+#define GT_PCI_REMAP_SHF 0
+#define GT_PCI_REMAP_MSK (MSK(11) << GT_PCI_REMAP_SHF)
+
+
+#define GT_CFGADDR_CFGEN_SHF 31
+#define GT_CFGADDR_CFGEN_MSK (MSK(1) << GT_CFGADDR_CFGEN_SHF)
+#define GT_CFGADDR_CFGEN_BIT GT_CFGADDR_CFGEN_MSK
+
+#define GT_CFGADDR_BUSNUM_SHF 16
+#define GT_CFGADDR_BUSNUM_MSK (MSK(8) << GT_CFGADDR_BUSNUM_SHF)
+
+#define GT_CFGADDR_DEVNUM_SHF 11
+#define GT_CFGADDR_DEVNUM_MSK (MSK(5) << GT_CFGADDR_DEVNUM_SHF)
+
+#define GT_CFGADDR_FUNCNUM_SHF 8
+#define GT_CFGADDR_FUNCNUM_MSK (MSK(3) << GT_CFGADDR_FUNCNUM_SHF)
+
+#define GT_CFGADDR_REGNUM_SHF 2
+#define GT_CFGADDR_REGNUM_MSK (MSK(6) << GT_CFGADDR_REGNUM_SHF)
+
+
+#define GT_SDRAM_BM_ORDER_SHF 2
+#define GT_SDRAM_BM_ORDER_MSK (MSK(1) << GT_SDRAM_BM_ORDER_SHF)
+#define GT_SDRAM_BM_ORDER_BIT GT_SDRAM_BM_ORDER_MSK
+#define GT_SDRAM_BM_ORDER_SUB 1
+#define GT_SDRAM_BM_ORDER_LIN 0
+
+#define GT_SDRAM_BM_RSVD_ALL1 0xffb
+
+
+#define GT_SDRAM_ADDRDECODE_ADDR_SHF 0
+#define GT_SDRAM_ADDRDECODE_ADDR_MSK (MSK(3) << GT_SDRAM_ADDRDECODE_ADDR_SHF)
+#define GT_SDRAM_ADDRDECODE_ADDR_0 0
+#define GT_SDRAM_ADDRDECODE_ADDR_1 1
+#define GT_SDRAM_ADDRDECODE_ADDR_2 2
+#define GT_SDRAM_ADDRDECODE_ADDR_3 3
+#define GT_SDRAM_ADDRDECODE_ADDR_4 4
+#define GT_SDRAM_ADDRDECODE_ADDR_5 5
+#define GT_SDRAM_ADDRDECODE_ADDR_6 6
+#define GT_SDRAM_ADDRDECODE_ADDR_7 7
+
+
+#define GT_SDRAM_B0_CASLAT_SHF 0
+#define GT_SDRAM_B0_CASLAT_MSK (MSK(2) << GT_SDRAM_B0__SHF)
+#define GT_SDRAM_B0_CASLAT_2 1
+#define GT_SDRAM_B0_CASLAT_3 2
+
+#define GT_SDRAM_B0_FTDIS_SHF 2
+#define GT_SDRAM_B0_FTDIS_MSK (MSK(1) << GT_SDRAM_B0_FTDIS_SHF)
+#define GT_SDRAM_B0_FTDIS_BIT GT_SDRAM_B0_FTDIS_MSK
+
+#define GT_SDRAM_B0_SRASPRCHG_SHF 3
+#define GT_SDRAM_B0_SRASPRCHG_MSK (MSK(1) << GT_SDRAM_B0_SRASPRCHG_SHF)
+#define GT_SDRAM_B0_SRASPRCHG_BIT GT_SDRAM_B0_SRASPRCHG_MSK
+#define GT_SDRAM_B0_SRASPRCHG_2 0
+#define GT_SDRAM_B0_SRASPRCHG_3 1
+
+#define GT_SDRAM_B0_B0COMPAB_SHF 4
+#define GT_SDRAM_B0_B0COMPAB_MSK (MSK(1) << GT_SDRAM_B0_B0COMPAB_SHF)
+#define GT_SDRAM_B0_B0COMPAB_BIT GT_SDRAM_B0_B0COMPAB_MSK
+
+#define GT_SDRAM_B0_64BITINT_SHF 5
+#define GT_SDRAM_B0_64BITINT_MSK (MSK(1) << GT_SDRAM_B0_64BITINT_SHF)
+#define GT_SDRAM_B0_64BITINT_BIT GT_SDRAM_B0_64BITINT_MSK
+#define GT_SDRAM_B0_64BITINT_2 0
+#define GT_SDRAM_B0_64BITINT_4 1
+
+#define GT_SDRAM_B0_BW_SHF 6
+#define GT_SDRAM_B0_BW_MSK (MSK(1) << GT_SDRAM_B0_BW_SHF)
+#define GT_SDRAM_B0_BW_BIT GT_SDRAM_B0_BW_MSK
+#define GT_SDRAM_B0_BW_32 0
+#define GT_SDRAM_B0_BW_64 1
+
+#define GT_SDRAM_B0_BLODD_SHF 7
+#define GT_SDRAM_B0_BLODD_MSK (MSK(1) << GT_SDRAM_B0_BLODD_SHF)
+#define GT_SDRAM_B0_BLODD_BIT GT_SDRAM_B0_BLODD_MSK
+
+#define GT_SDRAM_B0_PAR_SHF 8
+#define GT_SDRAM_B0_PAR_MSK (MSK(1) << GT_SDRAM_B0_PAR_SHF)
+#define GT_SDRAM_B0_PAR_BIT GT_SDRAM_B0_PAR_MSK
+
+#define GT_SDRAM_B0_BYPASS_SHF 9
+#define GT_SDRAM_B0_BYPASS_MSK (MSK(1) << GT_SDRAM_B0_BYPASS_SHF)
+#define GT_SDRAM_B0_BYPASS_BIT GT_SDRAM_B0_BYPASS_MSK
+
+#define GT_SDRAM_B0_SRAS2SCAS_SHF 10
+#define GT_SDRAM_B0_SRAS2SCAS_MSK (MSK(1) << GT_SDRAM_B0_SRAS2SCAS_SHF)
+#define GT_SDRAM_B0_SRAS2SCAS_BIT GT_SDRAM_B0_SRAS2SCAS_MSK
+#define GT_SDRAM_B0_SRAS2SCAS_2 0
+#define GT_SDRAM_B0_SRAS2SCAS_3 1
+
+#define GT_SDRAM_B0_SIZE_SHF 11
+#define GT_SDRAM_B0_SIZE_MSK (MSK(1) << GT_SDRAM_B0_SIZE_SHF)
+#define GT_SDRAM_B0_SIZE_BIT GT_SDRAM_B0_SIZE_MSK
+#define GT_SDRAM_B0_SIZE_16M 0
+#define GT_SDRAM_B0_SIZE_64M 1
+
+#define GT_SDRAM_B0_EXTPAR_SHF 12
+#define GT_SDRAM_B0_EXTPAR_MSK (MSK(1) << GT_SDRAM_B0_EXTPAR_SHF)
+#define GT_SDRAM_B0_EXTPAR_BIT GT_SDRAM_B0_EXTPAR_MSK
+
+#define GT_SDRAM_B0_BLEN_SHF 13
+#define GT_SDRAM_B0_BLEN_MSK (MSK(1) << GT_SDRAM_B0_BLEN_SHF)
+#define GT_SDRAM_B0_BLEN_BIT GT_SDRAM_B0_BLEN_MSK
+#define GT_SDRAM_B0_BLEN_8 0
+#define GT_SDRAM_B0_BLEN_4 1
+
+
+#define GT_SDRAM_CFG_REFINT_SHF 0
+#define GT_SDRAM_CFG_REFINT_MSK (MSK(14) << GT_SDRAM_CFG_REFINT_SHF)
+
+#define GT_SDRAM_CFG_NINTERLEAVE_SHF 14
+#define GT_SDRAM_CFG_NINTERLEAVE_MSK (MSK(1) << GT_SDRAM_CFG_NINTERLEAVE_SHF)
+#define GT_SDRAM_CFG_NINTERLEAVE_BIT GT_SDRAM_CFG_NINTERLEAVE_MSK
+
+#define GT_SDRAM_CFG_RMW_SHF 15
+#define GT_SDRAM_CFG_RMW_MSK (MSK(1) << GT_SDRAM_CFG_RMW_SHF)
+#define GT_SDRAM_CFG_RMW_BIT GT_SDRAM_CFG_RMW_MSK
+
+#define GT_SDRAM_CFG_NONSTAGREF_SHF 16
+#define GT_SDRAM_CFG_NONSTAGREF_MSK (MSK(1) << GT_SDRAM_CFG_NONSTAGREF_SHF)
+#define GT_SDRAM_CFG_NONSTAGREF_BIT GT_SDRAM_CFG_NONSTAGREF_MSK
+
+#define GT_SDRAM_CFG_DUPCNTL_SHF 19
+#define GT_SDRAM_CFG_DUPCNTL_MSK (MSK(1) << GT_SDRAM_CFG_DUPCNTL_SHF)
+#define GT_SDRAM_CFG_DUPCNTL_BIT GT_SDRAM_CFG_DUPCNTL_MSK
+
+#define GT_SDRAM_CFG_DUPBA_SHF 20
+#define GT_SDRAM_CFG_DUPBA_MSK (MSK(1) << GT_SDRAM_CFG_DUPBA_SHF)
+#define GT_SDRAM_CFG_DUPBA_BIT GT_SDRAM_CFG_DUPBA_MSK
+
+#define GT_SDRAM_CFG_DUPEOT0_SHF 21
+#define GT_SDRAM_CFG_DUPEOT0_MSK (MSK(1) << GT_SDRAM_CFG_DUPEOT0_SHF)
+#define GT_SDRAM_CFG_DUPEOT0_BIT GT_SDRAM_CFG_DUPEOT0_MSK
+
+#define GT_SDRAM_CFG_DUPEOT1_SHF 22
+#define GT_SDRAM_CFG_DUPEOT1_MSK (MSK(1) << GT_SDRAM_CFG_DUPEOT1_SHF)
+#define GT_SDRAM_CFG_DUPEOT1_BIT GT_SDRAM_CFG_DUPEOT1_MSK
+
+#define GT_SDRAM_OPMODE_OP_SHF 0
+#define GT_SDRAM_OPMODE_OP_MSK (MSK(3) << GT_SDRAM_OPMODE_OP_SHF)
+#define GT_SDRAM_OPMODE_OP_NORMAL 0
+#define GT_SDRAM_OPMODE_OP_NOP 1
+#define GT_SDRAM_OPMODE_OP_PRCHG 2
+#define GT_SDRAM_OPMODE_OP_MODE 3
+#define GT_SDRAM_OPMODE_OP_CBR 4
+
+#define GT_TC_CONTROL_ENTC0_SHF 0
+#define GT_TC_CONTROL_ENTC0_MSK (MSK(1) << GT_TC_CONTROL_ENTC0_SHF)
+#define GT_TC_CONTROL_ENTC0_BIT GT_TC_CONTROL_ENTC0_MSK
+#define GT_TC_CONTROL_SELTC0_SHF 1
+#define GT_TC_CONTROL_SELTC0_MSK (MSK(1) << GT_TC_CONTROL_SELTC0_SHF)
+#define GT_TC_CONTROL_SELTC0_BIT GT_TC_CONTROL_SELTC0_MSK
+
+
+#define GT_PCI0_BARE_SWSCS3BOOTDIS_SHF 0
+#define GT_PCI0_BARE_SWSCS3BOOTDIS_MSK (MSK(1) << GT_PCI0_BARE_SWSCS3BOOTDIS_SHF)
+#define GT_PCI0_BARE_SWSCS3BOOTDIS_BIT GT_PCI0_BARE_SWSCS3BOOTDIS_MSK
+
+#define GT_PCI0_BARE_SWSCS32DIS_SHF 1
+#define GT_PCI0_BARE_SWSCS32DIS_MSK (MSK(1) << GT_PCI0_BARE_SWSCS32DIS_SHF)
+#define GT_PCI0_BARE_SWSCS32DIS_BIT GT_PCI0_BARE_SWSCS32DIS_MSK
+
+#define GT_PCI0_BARE_SWSCS10DIS_SHF 2
+#define GT_PCI0_BARE_SWSCS10DIS_MSK (MSK(1) << GT_PCI0_BARE_SWSCS10DIS_SHF)
+#define GT_PCI0_BARE_SWSCS10DIS_BIT GT_PCI0_BARE_SWSCS10DIS_MSK
+
+#define GT_PCI0_BARE_INTIODIS_SHF 3
+#define GT_PCI0_BARE_INTIODIS_MSK (MSK(1) << GT_PCI0_BARE_INTIODIS_SHF)
+#define GT_PCI0_BARE_INTIODIS_BIT GT_PCI0_BARE_INTIODIS_MSK
+
+#define GT_PCI0_BARE_INTMEMDIS_SHF 4
+#define GT_PCI0_BARE_INTMEMDIS_MSK (MSK(1) << GT_PCI0_BARE_INTMEMDIS_SHF)
+#define GT_PCI0_BARE_INTMEMDIS_BIT GT_PCI0_BARE_INTMEMDIS_MSK
+
+#define GT_PCI0_BARE_CS3BOOTDIS_SHF 5
+#define GT_PCI0_BARE_CS3BOOTDIS_MSK (MSK(1) << GT_PCI0_BARE_CS3BOOTDIS_SHF)
+#define GT_PCI0_BARE_CS3BOOTDIS_BIT GT_PCI0_BARE_CS3BOOTDIS_MSK
+
+#define GT_PCI0_BARE_CS20DIS_SHF 6
+#define GT_PCI0_BARE_CS20DIS_MSK (MSK(1) << GT_PCI0_BARE_CS20DIS_SHF)
+#define GT_PCI0_BARE_CS20DIS_BIT GT_PCI0_BARE_CS20DIS_MSK
+
+#define GT_PCI0_BARE_SCS32DIS_SHF 7
+#define GT_PCI0_BARE_SCS32DIS_MSK (MSK(1) << GT_PCI0_BARE_SCS32DIS_SHF)
+#define GT_PCI0_BARE_SCS32DIS_BIT GT_PCI0_BARE_SCS32DIS_MSK
+
+#define GT_PCI0_BARE_SCS10DIS_SHF 8
+#define GT_PCI0_BARE_SCS10DIS_MSK (MSK(1) << GT_PCI0_BARE_SCS10DIS_SHF)
+#define GT_PCI0_BARE_SCS10DIS_BIT GT_PCI0_BARE_SCS10DIS_MSK
+
+
+#define GT_INTRCAUSE_MASABORT0_SHF 18
+#define GT_INTRCAUSE_MASABORT0_MSK (MSK(1) << GT_INTRCAUSE_MASABORT0_SHF)
+#define GT_INTRCAUSE_MASABORT0_BIT GT_INTRCAUSE_MASABORT0_MSK
+
+#define GT_INTRCAUSE_TARABORT0_SHF 19
+#define GT_INTRCAUSE_TARABORT0_MSK (MSK(1) << GT_INTRCAUSE_TARABORT0_SHF)
+#define GT_INTRCAUSE_TARABORT0_BIT GT_INTRCAUSE_TARABORT0_MSK
+
+
+#define GT_PCI0_CFGADDR_REGNUM_SHF 2
+#define GT_PCI0_CFGADDR_REGNUM_MSK (MSK(6) << GT_PCI0_CFGADDR_REGNUM_SHF)
+#define GT_PCI0_CFGADDR_FUNCTNUM_SHF 8
+#define GT_PCI0_CFGADDR_FUNCTNUM_MSK (MSK(3) << GT_PCI0_CFGADDR_FUNCTNUM_SHF)
+#define GT_PCI0_CFGADDR_DEVNUM_SHF 11
+#define GT_PCI0_CFGADDR_DEVNUM_MSK (MSK(5) << GT_PCI0_CFGADDR_DEVNUM_SHF)
+#define GT_PCI0_CFGADDR_BUSNUM_SHF 16
+#define GT_PCI0_CFGADDR_BUSNUM_MSK (MSK(8) << GT_PCI0_CFGADDR_BUSNUM_SHF)
+#define GT_PCI0_CFGADDR_CONFIGEN_SHF 31
+#define GT_PCI0_CFGADDR_CONFIGEN_MSK (MSK(1) << GT_PCI0_CFGADDR_CONFIGEN_SHF)
+#define GT_PCI0_CFGADDR_CONFIGEN_BIT GT_PCI0_CFGADDR_CONFIGEN_MSK
+
+#define GT_PCI0_CMD_MBYTESWAP_SHF 0
+#define GT_PCI0_CMD_MBYTESWAP_MSK (MSK(1) << GT_PCI0_CMD_MBYTESWAP_SHF)
+#define GT_PCI0_CMD_MBYTESWAP_BIT GT_PCI0_CMD_MBYTESWAP_MSK
+#define GT_PCI0_CMD_MWORDSWAP_SHF 10
+#define GT_PCI0_CMD_MWORDSWAP_MSK (MSK(1) << GT_PCI0_CMD_MWORDSWAP_SHF)
+#define GT_PCI0_CMD_MWORDSWAP_BIT GT_PCI0_CMD_MWORDSWAP_MSK
+#define GT_PCI0_CMD_SBYTESWAP_SHF 16
+#define GT_PCI0_CMD_SBYTESWAP_MSK (MSK(1) << GT_PCI0_CMD_SBYTESWAP_SHF)
+#define GT_PCI0_CMD_SBYTESWAP_BIT GT_PCI0_CMD_SBYTESWAP_MSK
+#define GT_PCI0_CMD_SWORDSWAP_SHF 11
+#define GT_PCI0_CMD_SWORDSWAP_MSK (MSK(1) << GT_PCI0_CMD_SWORDSWAP_SHF)
+#define GT_PCI0_CMD_SWORDSWAP_BIT GT_PCI0_CMD_SWORDSWAP_MSK
+
+#define GT_INTR_T0EXP_SHF 8
+#define GT_INTR_T0EXP_MSK (MSK(1) << GT_INTR_T0EXP_SHF)
+#define GT_INTR_T0EXP_BIT GT_INTR_T0EXP_MSK
+#define GT_INTR_RETRYCTR0_SHF 20
+#define GT_INTR_RETRYCTR0_MSK (MSK(1) << GT_INTR_RETRYCTR0_SHF)
+#define GT_INTR_RETRYCTR0_BIT GT_INTR_RETRYCTR0_MSK
+
+/*
+ * Misc
+ */
+#define GT_DEF_PCI0_IO_BASE 0x10000000UL
+#define GT_DEF_PCI0_IO_SIZE 0x02000000UL
+#define GT_DEF_PCI0_MEM0_BASE 0x12000000UL
+#define GT_DEF_PCI0_MEM0_SIZE 0x02000000UL
+#define GT_DEF_BASE 0x14000000UL
+
+#define GT_MAX_BANKSIZE (256 * 1024 * 1024) /* Max 256MB bank */
+#define GT_LATTIM_MIN 6 /* Minimum lat */
+
+/*
+ * The gt64120_dep.h file must define the following macros
+ *
+ * GT_READ(ofs, data_pointer)
+ * GT_WRITE(ofs, data) - read/write GT64120 registers in 32bit
+ *
+ * TIMER - gt64120 timer irq, temporary solution until
+ * full gt64120 cascade interrupt support is in place
+ */
+
+#include <mach-gt64120.h>
+
+/*
+ * Because of an error/peculiarity in the Galileo chip, we need to swap the
+ * bytes when running bigendian. We also provide non-swapping versions.
+ */
+#define __GT_READ(ofs) \
+ (*(volatile u32 *)(GT64120_BASE+(ofs)))
+#define __GT_WRITE(ofs, data) \
+ do { *(volatile u32 *)(GT64120_BASE+(ofs)) = (data); } while (0)
+#define GT_READ(ofs) le32_to_cpu(__GT_READ(ofs))
+#define GT_WRITE(ofs, data) __GT_WRITE(ofs, cpu_to_le32(data))
+
+extern void gt641xx_set_base_clock(unsigned int clock);
+extern int gt641xx_timer0_state(void);
+
+#endif /* _ASM_GT64120_H */
diff --git a/arch/mips/include/asm/hardirq.h b/arch/mips/include/asm/hardirq.h
new file mode 100644
index 00000000000..90bf399e6dd
--- /dev/null
+++ b/arch/mips/include/asm/hardirq.h
@@ -0,0 +1,24 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997, 98, 99, 2000, 01, 05 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_HARDIRQ_H
+#define _ASM_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+typedef struct {
+ unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
+
+extern void ack_bad_irq(unsigned int irq);
+
+#endif /* _ASM_HARDIRQ_H */
diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h
new file mode 100644
index 00000000000..2de638f84c8
--- /dev/null
+++ b/arch/mips/include/asm/hazards.h
@@ -0,0 +1,271 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 04, 07 Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) MIPS Technologies, Inc.
+ * written by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef _ASM_HAZARDS_H
+#define _ASM_HAZARDS_H
+
+#ifdef __ASSEMBLY__
+#define ASMMACRO(name, code...) .macro name; code; .endm
+#else
+
+#include <asm/cpu-features.h>
+
+#define ASMMACRO(name, code...) \
+__asm__(".macro " #name "; " #code "; .endm"); \
+ \
+static inline void name(void) \
+{ \
+ __asm__ __volatile__ (#name); \
+}
+
+/*
+ * MIPS R2 instruction hazard barrier. Needs to be called as a subroutine.
+ */
+extern void mips_ihb(void);
+
+#endif
+
+ASMMACRO(_ssnop,
+ sll $0, $0, 1
+ )
+
+ASMMACRO(_ehb,
+ sll $0, $0, 3
+ )
+
+/*
+ * TLB hazards
+ */
+#if defined(CONFIG_CPU_MIPSR2)
+
+/*
+ * MIPSR2 defines ehb for hazard avoidance
+ */
+
+ASMMACRO(mtc0_tlbw_hazard,
+ _ehb
+ )
+ASMMACRO(tlbw_use_hazard,
+ _ehb
+ )
+ASMMACRO(tlb_probe_hazard,
+ _ehb
+ )
+ASMMACRO(irq_enable_hazard,
+ _ehb
+ )
+ASMMACRO(irq_disable_hazard,
+ _ehb
+ )
+ASMMACRO(back_to_back_c0_hazard,
+ _ehb
+ )
+/*
+ * gcc has a tradition of misscompiling the previous construct using the
+ * address of a label as argument to inline assembler. Gas otoh has the
+ * annoying difference between la and dla which are only usable for 32-bit
+ * rsp. 64-bit code, so can't be used without conditional compilation.
+ * The alterantive is switching the assembler to 64-bit code which happens
+ * to work right even for 32-bit code ...
+ */
+#define instruction_hazard() \
+do { \
+ unsigned long tmp; \
+ \
+ __asm__ __volatile__( \
+ " .set mips64r2 \n" \
+ " dla %0, 1f \n" \
+ " jr.hb %0 \n" \
+ " .set mips0 \n" \
+ "1: \n" \
+ : "=r" (tmp)); \
+} while (0)
+
+#elif defined(CONFIG_CPU_MIPSR1)
+
+/*
+ * These are slightly complicated by the fact that we guarantee R1 kernels to
+ * run fine on R2 processors.
+ */
+ASMMACRO(mtc0_tlbw_hazard,
+ _ssnop; _ssnop; _ehb
+ )
+ASMMACRO(tlbw_use_hazard,
+ _ssnop; _ssnop; _ssnop; _ehb
+ )
+ASMMACRO(tlb_probe_hazard,
+ _ssnop; _ssnop; _ssnop; _ehb
+ )
+ASMMACRO(irq_enable_hazard,
+ _ssnop; _ssnop; _ssnop; _ehb
+ )
+ASMMACRO(irq_disable_hazard,
+ _ssnop; _ssnop; _ssnop; _ehb
+ )
+ASMMACRO(back_to_back_c0_hazard,
+ _ssnop; _ssnop; _ssnop; _ehb
+ )
+/*
+ * gcc has a tradition of misscompiling the previous construct using the
+ * address of a label as argument to inline assembler. Gas otoh has the
+ * annoying difference between la and dla which are only usable for 32-bit
+ * rsp. 64-bit code, so can't be used without conditional compilation.
+ * The alterantive is switching the assembler to 64-bit code which happens
+ * to work right even for 32-bit code ...
+ */
+#define __instruction_hazard() \
+do { \
+ unsigned long tmp; \
+ \
+ __asm__ __volatile__( \
+ " .set mips64r2 \n" \
+ " dla %0, 1f \n" \
+ " jr.hb %0 \n" \
+ " .set mips0 \n" \
+ "1: \n" \
+ : "=r" (tmp)); \
+} while (0)
+
+#define instruction_hazard() \
+do { \
+ if (cpu_has_mips_r2) \
+ __instruction_hazard(); \
+} while (0)
+
+#elif defined(CONFIG_CPU_R10000)
+
+/*
+ * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
+ */
+
+ASMMACRO(mtc0_tlbw_hazard,
+ )
+ASMMACRO(tlbw_use_hazard,
+ )
+ASMMACRO(tlb_probe_hazard,
+ )
+ASMMACRO(irq_enable_hazard,
+ )
+ASMMACRO(irq_disable_hazard,
+ )
+ASMMACRO(back_to_back_c0_hazard,
+ )
+#define instruction_hazard() do { } while (0)
+
+#elif defined(CONFIG_CPU_RM9000)
+
+/*
+ * RM9000 hazards. When the JTLB is updated by tlbwi or tlbwr, a subsequent
+ * use of the JTLB for instructions should not occur for 4 cpu cycles and use
+ * for data translations should not occur for 3 cpu cycles.
+ */
+
+ASMMACRO(mtc0_tlbw_hazard,
+ _ssnop; _ssnop; _ssnop; _ssnop
+ )
+ASMMACRO(tlbw_use_hazard,
+ _ssnop; _ssnop; _ssnop; _ssnop
+ )
+ASMMACRO(tlb_probe_hazard,
+ _ssnop; _ssnop; _ssnop; _ssnop
+ )
+ASMMACRO(irq_enable_hazard,
+ )
+ASMMACRO(irq_disable_hazard,
+ )
+ASMMACRO(back_to_back_c0_hazard,
+ )
+#define instruction_hazard() do { } while (0)
+
+#elif defined(CONFIG_CPU_SB1)
+
+/*
+ * Mostly like R4000 for historic reasons
+ */
+ASMMACRO(mtc0_tlbw_hazard,
+ )
+ASMMACRO(tlbw_use_hazard,
+ )
+ASMMACRO(tlb_probe_hazard,
+ )
+ASMMACRO(irq_enable_hazard,
+ )
+ASMMACRO(irq_disable_hazard,
+ _ssnop; _ssnop; _ssnop
+ )
+ASMMACRO(back_to_back_c0_hazard,
+ )
+#define instruction_hazard() do { } while (0)
+
+#else
+
+/*
+ * Finally the catchall case for all other processors including R4000, R4400,
+ * R4600, R4700, R5000, RM7000, NEC VR41xx etc.
+ *
+ * The taken branch will result in a two cycle penalty for the two killed
+ * instructions on R4000 / R4400. Other processors only have a single cycle
+ * hazard so this is nice trick to have an optimal code for a range of
+ * processors.
+ */
+ASMMACRO(mtc0_tlbw_hazard,
+ nop; nop
+ )
+ASMMACRO(tlbw_use_hazard,
+ nop; nop; nop
+ )
+ASMMACRO(tlb_probe_hazard,
+ nop; nop; nop
+ )
+ASMMACRO(irq_enable_hazard,
+ _ssnop; _ssnop; _ssnop;
+ )
+ASMMACRO(irq_disable_hazard,
+ nop; nop; nop
+ )
+ASMMACRO(back_to_back_c0_hazard,
+ _ssnop; _ssnop; _ssnop;
+ )
+#define instruction_hazard() do { } while (0)
+
+#endif
+
+
+/* FPU hazards */
+
+#if defined(CONFIG_CPU_SB1)
+ASMMACRO(enable_fpu_hazard,
+ .set push;
+ .set mips64;
+ .set noreorder;
+ _ssnop;
+ bnezl $0, .+4;
+ _ssnop;
+ .set pop
+)
+ASMMACRO(disable_fpu_hazard,
+)
+
+#elif defined(CONFIG_CPU_MIPSR2)
+ASMMACRO(enable_fpu_hazard,
+ _ehb
+)
+ASMMACRO(disable_fpu_hazard,
+ _ehb
+)
+#else
+ASMMACRO(enable_fpu_hazard,
+ nop; nop; nop; nop
+)
+ASMMACRO(disable_fpu_hazard,
+ _ehb
+)
+#endif
+
+#endif /* _ASM_HAZARDS_H */
diff --git a/arch/mips/include/asm/highmem.h b/arch/mips/include/asm/highmem.h
new file mode 100644
index 00000000000..4374ab2adc7
--- /dev/null
+++ b/arch/mips/include/asm/highmem.h
@@ -0,0 +1,67 @@
+/*
+ * highmem.h: virtual kernel memory mappings for high memory
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ * Gerhard.Wichert@pdb.siemens.de
+ *
+ *
+ * Redesigned the x86 32-bit VM architecture to deal with
+ * up to 16 Terabyte physical memory. With current x86 CPUs
+ * we now support up to 64 Gigabytes physical RAM.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ */
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/uaccess.h>
+#include <asm/kmap_types.h>
+
+/* undef for production */
+#define HIGHMEM_DEBUG 1
+
+/* declarations for highmem.c */
+extern unsigned long highstart_pfn, highend_pfn;
+
+extern pte_t *kmap_pte;
+extern pgprot_t kmap_prot;
+extern pte_t *pkmap_page_table;
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.
+ */
+#define LAST_PKMAP 1024
+#define LAST_PKMAP_MASK (LAST_PKMAP-1)
+#define PKMAP_NR(virt) ((virt-PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+extern void * kmap_high(struct page *page);
+extern void kunmap_high(struct page *page);
+
+extern void *__kmap(struct page *page);
+extern void __kunmap(struct page *page);
+extern void *__kmap_atomic(struct page *page, enum km_type type);
+extern void __kunmap_atomic(void *kvaddr, enum km_type type);
+extern void *kmap_atomic_pfn(unsigned long pfn, enum km_type type);
+extern struct page *__kmap_atomic_to_page(void *ptr);
+
+#define kmap __kmap
+#define kunmap __kunmap
+#define kmap_atomic __kmap_atomic
+#define kunmap_atomic __kunmap_atomic
+#define kmap_atomic_to_page __kmap_atomic_to_page
+
+#define flush_cache_kmaps() flush_cache_all()
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_HIGHMEM_H */
diff --git a/arch/mips/include/asm/hw_irq.h b/arch/mips/include/asm/hw_irq.h
new file mode 100644
index 00000000000..aca05a43a97
--- /dev/null
+++ b/arch/mips/include/asm/hw_irq.h
@@ -0,0 +1,20 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000, 2001, 2002 by Ralf Baechle
+ */
+#ifndef __ASM_HW_IRQ_H
+#define __ASM_HW_IRQ_H
+
+#include <asm/atomic.h>
+
+extern atomic_t irq_err_count;
+
+/*
+ * interrupt-retrigger: NOP for now. This may not be apropriate for all
+ * machines, we'll see ...
+ */
+
+#endif /* __ASM_HW_IRQ_H */
diff --git a/arch/mips/include/asm/i8253.h b/arch/mips/include/asm/i8253.h
new file mode 100644
index 00000000000..5dabc870b32
--- /dev/null
+++ b/arch/mips/include/asm/i8253.h
@@ -0,0 +1,21 @@
+/*
+ * Machine specific IO port address definition for generic.
+ * Written by Osamu Tomita <tomita@cinet.co.jp>
+ */
+#ifndef __ASM_I8253_H
+#define __ASM_I8253_H
+
+#include <linux/spinlock.h>
+
+/* i8253A PIT registers */
+#define PIT_MODE 0x43
+#define PIT_CH0 0x40
+#define PIT_CH2 0x42
+
+#define PIT_TICK_RATE 1193182UL
+
+extern spinlock_t i8253_lock;
+
+extern void setup_pit_timer(void);
+
+#endif /* __ASM_I8253_H */
diff --git a/arch/mips/include/asm/i8259.h b/arch/mips/include/asm/i8259.h
new file mode 100644
index 00000000000..8572a2d9048
--- /dev/null
+++ b/arch/mips/include/asm/i8259.h
@@ -0,0 +1,86 @@
+/*
+ * include/asm-mips/i8259.h
+ *
+ * i8259A interrupt definitions.
+ *
+ * Copyright (C) 2003 Maciej W. Rozycki
+ * Copyright (C) 2003 Ralf Baechle <ralf@linux-mips.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_I8259_H
+#define _ASM_I8259_H
+
+#include <linux/compiler.h>
+#include <linux/spinlock.h>
+
+#include <asm/io.h>
+#include <irq.h>
+
+/* i8259A PIC registers */
+#define PIC_MASTER_CMD 0x20
+#define PIC_MASTER_IMR 0x21
+#define PIC_MASTER_ISR PIC_MASTER_CMD
+#define PIC_MASTER_POLL PIC_MASTER_ISR
+#define PIC_MASTER_OCW3 PIC_MASTER_ISR
+#define PIC_SLAVE_CMD 0xa0
+#define PIC_SLAVE_IMR 0xa1
+
+/* i8259A PIC related value */
+#define PIC_CASCADE_IR 2
+#define MASTER_ICW4_DEFAULT 0x01
+#define SLAVE_ICW4_DEFAULT 0x01
+#define PIC_ICW4_AEOI 2
+
+extern spinlock_t i8259A_lock;
+
+extern int i8259A_irq_pending(unsigned int irq);
+extern void make_8259A_irq(unsigned int irq);
+
+extern void init_i8259_irqs(void);
+
+/*
+ * Do the traditional i8259 interrupt polling thing. This is for the few
+ * cases where no better interrupt acknowledge method is available and we
+ * absolutely must touch the i8259.
+ */
+static inline int i8259_irq(void)
+{
+ int irq;
+
+ spin_lock(&i8259A_lock);
+
+ /* Perform an interrupt acknowledge cycle on controller 1. */
+ outb(0x0C, PIC_MASTER_CMD); /* prepare for poll */
+ irq = inb(PIC_MASTER_CMD) & 7;
+ if (irq == PIC_CASCADE_IR) {
+ /*
+ * Interrupt is cascaded so perform interrupt
+ * acknowledge on controller 2.
+ */
+ outb(0x0C, PIC_SLAVE_CMD); /* prepare for poll */
+ irq = (inb(PIC_SLAVE_CMD) & 7) + 8;
+ }
+
+ if (unlikely(irq == 7)) {
+ /*
+ * This may be a spurious interrupt.
+ *
+ * Read the interrupt status register (ISR). If the most
+ * significant bit is not set then there is no valid
+ * interrupt.
+ */
+ outb(0x0B, PIC_MASTER_ISR); /* ISR register */
+ if(~inb(PIC_MASTER_ISR) & 0x80)
+ irq = -1;
+ }
+
+ spin_unlock(&i8259A_lock);
+
+ return likely(irq >= 0) ? irq + I8259A_IRQ_BASE : irq;
+}
+
+#endif /* _ASM_I8259_H */
diff --git a/arch/mips/include/asm/ide.h b/arch/mips/include/asm/ide.h
new file mode 100644
index 00000000000..bb674c3b030
--- /dev/null
+++ b/arch/mips/include/asm/ide.h
@@ -0,0 +1,13 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * This file contains the MIPS architecture specific IDE code.
+ */
+#ifndef __ASM_IDE_H
+#define __ASM_IDE_H
+
+#include <ide.h>
+
+#endif /* __ASM_IDE_H */
diff --git a/arch/mips/include/asm/inst.h b/arch/mips/include/asm/inst.h
new file mode 100644
index 00000000000..6489f00731c
--- /dev/null
+++ b/arch/mips/include/asm/inst.h
@@ -0,0 +1,394 @@
+/*
+ * Format of an instruction in memory.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 2000 by Ralf Baechle
+ * Copyright (C) 2006 by Thiemo Seufer
+ */
+#ifndef _ASM_INST_H
+#define _ASM_INST_H
+
+/*
+ * Major opcodes; before MIPS IV cop1x was called cop3.
+ */
+enum major_op {
+ spec_op, bcond_op, j_op, jal_op,
+ beq_op, bne_op, blez_op, bgtz_op,
+ addi_op, addiu_op, slti_op, sltiu_op,
+ andi_op, ori_op, xori_op, lui_op,
+ cop0_op, cop1_op, cop2_op, cop1x_op,
+ beql_op, bnel_op, blezl_op, bgtzl_op,
+ daddi_op, daddiu_op, ldl_op, ldr_op,
+ spec2_op, jalx_op, mdmx_op, spec3_op,
+ lb_op, lh_op, lwl_op, lw_op,
+ lbu_op, lhu_op, lwr_op, lwu_op,
+ sb_op, sh_op, swl_op, sw_op,
+ sdl_op, sdr_op, swr_op, cache_op,
+ ll_op, lwc1_op, lwc2_op, pref_op,
+ lld_op, ldc1_op, ldc2_op, ld_op,
+ sc_op, swc1_op, swc2_op, major_3b_op,
+ scd_op, sdc1_op, sdc2_op, sd_op
+};
+
+/*
+ * func field of spec opcode.
+ */
+enum spec_op {
+ sll_op, movc_op, srl_op, sra_op,
+ sllv_op, pmon_op, srlv_op, srav_op,
+ jr_op, jalr_op, movz_op, movn_op,
+ syscall_op, break_op, spim_op, sync_op,
+ mfhi_op, mthi_op, mflo_op, mtlo_op,
+ dsllv_op, spec2_unused_op, dsrlv_op, dsrav_op,
+ mult_op, multu_op, div_op, divu_op,
+ dmult_op, dmultu_op, ddiv_op, ddivu_op,
+ add_op, addu_op, sub_op, subu_op,
+ and_op, or_op, xor_op, nor_op,
+ spec3_unused_op, spec4_unused_op, slt_op, sltu_op,
+ dadd_op, daddu_op, dsub_op, dsubu_op,
+ tge_op, tgeu_op, tlt_op, tltu_op,
+ teq_op, spec5_unused_op, tne_op, spec6_unused_op,
+ dsll_op, spec7_unused_op, dsrl_op, dsra_op,
+ dsll32_op, spec8_unused_op, dsrl32_op, dsra32_op
+};
+
+/*
+ * func field of spec2 opcode.
+ */
+enum spec2_op {
+ madd_op, maddu_op, mul_op, spec2_3_unused_op,
+ msub_op, msubu_op, /* more unused ops */
+ clz_op = 0x20, clo_op,
+ dclz_op = 0x24, dclo_op,
+ sdbpp_op = 0x3f
+};
+
+/*
+ * func field of spec3 opcode.
+ */
+enum spec3_op {
+ ext_op, dextm_op, dextu_op, dext_op,
+ ins_op, dinsm_op, dinsu_op, dins_op,
+ bshfl_op = 0x20,
+ dbshfl_op = 0x24,
+ rdhwr_op = 0x3b
+};
+
+/*
+ * rt field of bcond opcodes.
+ */
+enum rt_op {
+ bltz_op, bgez_op, bltzl_op, bgezl_op,
+ spimi_op, unused_rt_op_0x05, unused_rt_op_0x06, unused_rt_op_0x07,
+ tgei_op, tgeiu_op, tlti_op, tltiu_op,
+ teqi_op, unused_0x0d_rt_op, tnei_op, unused_0x0f_rt_op,
+ bltzal_op, bgezal_op, bltzall_op, bgezall_op,
+ rt_op_0x14, rt_op_0x15, rt_op_0x16, rt_op_0x17,
+ rt_op_0x18, rt_op_0x19, rt_op_0x1a, rt_op_0x1b,
+ bposge32_op, rt_op_0x1d, rt_op_0x1e, rt_op_0x1f
+};
+
+/*
+ * rs field of cop opcodes.
+ */
+enum cop_op {
+ mfc_op = 0x00, dmfc_op = 0x01,
+ cfc_op = 0x02, mtc_op = 0x04,
+ dmtc_op = 0x05, ctc_op = 0x06,
+ bc_op = 0x08, cop_op = 0x10,
+ copm_op = 0x18
+};
+
+/*
+ * rt field of cop.bc_op opcodes
+ */
+enum bcop_op {
+ bcf_op, bct_op, bcfl_op, bctl_op
+};
+
+/*
+ * func field of cop0 coi opcodes.
+ */
+enum cop0_coi_func {
+ tlbr_op = 0x01, tlbwi_op = 0x02,
+ tlbwr_op = 0x06, tlbp_op = 0x08,
+ rfe_op = 0x10, eret_op = 0x18
+};
+
+/*
+ * func field of cop0 com opcodes.
+ */
+enum cop0_com_func {
+ tlbr1_op = 0x01, tlbw_op = 0x02,
+ tlbp1_op = 0x08, dctr_op = 0x09,
+ dctw_op = 0x0a
+};
+
+/*
+ * fmt field of cop1 opcodes.
+ */
+enum cop1_fmt {
+ s_fmt, d_fmt, e_fmt, q_fmt,
+ w_fmt, l_fmt
+};
+
+/*
+ * func field of cop1 instructions using d, s or w format.
+ */
+enum cop1_sdw_func {
+ fadd_op = 0x00, fsub_op = 0x01,
+ fmul_op = 0x02, fdiv_op = 0x03,
+ fsqrt_op = 0x04, fabs_op = 0x05,
+ fmov_op = 0x06, fneg_op = 0x07,
+ froundl_op = 0x08, ftruncl_op = 0x09,
+ fceill_op = 0x0a, ffloorl_op = 0x0b,
+ fround_op = 0x0c, ftrunc_op = 0x0d,
+ fceil_op = 0x0e, ffloor_op = 0x0f,
+ fmovc_op = 0x11, fmovz_op = 0x12,
+ fmovn_op = 0x13, frecip_op = 0x15,
+ frsqrt_op = 0x16, fcvts_op = 0x20,
+ fcvtd_op = 0x21, fcvte_op = 0x22,
+ fcvtw_op = 0x24, fcvtl_op = 0x25,
+ fcmp_op = 0x30
+};
+
+/*
+ * func field of cop1x opcodes (MIPS IV).
+ */
+enum cop1x_func {
+ lwxc1_op = 0x00, ldxc1_op = 0x01,
+ pfetch_op = 0x07, swxc1_op = 0x08,
+ sdxc1_op = 0x09, madd_s_op = 0x20,
+ madd_d_op = 0x21, madd_e_op = 0x22,
+ msub_s_op = 0x28, msub_d_op = 0x29,
+ msub_e_op = 0x2a, nmadd_s_op = 0x30,
+ nmadd_d_op = 0x31, nmadd_e_op = 0x32,
+ nmsub_s_op = 0x38, nmsub_d_op = 0x39,
+ nmsub_e_op = 0x3a
+};
+
+/*
+ * func field for mad opcodes (MIPS IV).
+ */
+enum mad_func {
+ madd_fp_op = 0x08, msub_fp_op = 0x0a,
+ nmadd_fp_op = 0x0c, nmsub_fp_op = 0x0e
+};
+
+/*
+ * Damn ... bitfields depend from byteorder :-(
+ */
+#ifdef __MIPSEB__
+struct j_format { /* Jump format */
+ unsigned int opcode : 6;
+ unsigned int target : 26;
+};
+
+struct i_format { /* Immediate format (addi, lw, ...) */
+ unsigned int opcode : 6;
+ unsigned int rs : 5;
+ unsigned int rt : 5;
+ signed int simmediate : 16;
+};
+
+struct u_format { /* Unsigned immediate format (ori, xori, ...) */
+ unsigned int opcode : 6;
+ unsigned int rs : 5;
+ unsigned int rt : 5;
+ unsigned int uimmediate : 16;
+};
+
+struct c_format { /* Cache (>= R6000) format */
+ unsigned int opcode : 6;
+ unsigned int rs : 5;
+ unsigned int c_op : 3;
+ unsigned int cache : 2;
+ unsigned int simmediate : 16;
+};
+
+struct r_format { /* Register format */
+ unsigned int opcode : 6;
+ unsigned int rs : 5;
+ unsigned int rt : 5;
+ unsigned int rd : 5;
+ unsigned int re : 5;
+ unsigned int func : 6;
+};
+
+struct p_format { /* Performance counter format (R10000) */
+ unsigned int opcode : 6;
+ unsigned int rs : 5;
+ unsigned int rt : 5;
+ unsigned int rd : 5;
+ unsigned int re : 5;
+ unsigned int func : 6;
+};
+
+struct f_format { /* FPU register format */
+ unsigned int opcode : 6;
+ unsigned int : 1;
+ unsigned int fmt : 4;
+ unsigned int rt : 5;
+ unsigned int rd : 5;
+ unsigned int re : 5;
+ unsigned int func : 6;
+};
+
+struct ma_format { /* FPU multipy and add format (MIPS IV) */
+ unsigned int opcode : 6;
+ unsigned int fr : 5;
+ unsigned int ft : 5;
+ unsigned int fs : 5;
+ unsigned int fd : 5;
+ unsigned int func : 4;
+ unsigned int fmt : 2;
+};
+
+#elif defined(__MIPSEL__)
+
+struct j_format { /* Jump format */
+ unsigned int target : 26;
+ unsigned int opcode : 6;
+};
+
+struct i_format { /* Immediate format */
+ signed int simmediate : 16;
+ unsigned int rt : 5;
+ unsigned int rs : 5;
+ unsigned int opcode : 6;
+};
+
+struct u_format { /* Unsigned immediate format */
+ unsigned int uimmediate : 16;
+ unsigned int rt : 5;
+ unsigned int rs : 5;
+ unsigned int opcode : 6;
+};
+
+struct c_format { /* Cache (>= R6000) format */
+ unsigned int simmediate : 16;
+ unsigned int cache : 2;
+ unsigned int c_op : 3;
+ unsigned int rs : 5;
+ unsigned int opcode : 6;
+};
+
+struct r_format { /* Register format */
+ unsigned int func : 6;
+ unsigned int re : 5;
+ unsigned int rd : 5;
+ unsigned int rt : 5;
+ unsigned int rs : 5;
+ unsigned int opcode : 6;
+};
+
+struct p_format { /* Performance counter format (R10000) */
+ unsigned int func : 6;
+ unsigned int re : 5;
+ unsigned int rd : 5;
+ unsigned int rt : 5;
+ unsigned int rs : 5;
+ unsigned int opcode : 6;
+};
+
+struct f_format { /* FPU register format */
+ unsigned int func : 6;
+ unsigned int re : 5;
+ unsigned int rd : 5;
+ unsigned int rt : 5;
+ unsigned int fmt : 4;
+ unsigned int : 1;
+ unsigned int opcode : 6;
+};
+
+struct ma_format { /* FPU multipy and add format (MIPS IV) */
+ unsigned int fmt : 2;
+ unsigned int func : 4;
+ unsigned int fd : 5;
+ unsigned int fs : 5;
+ unsigned int ft : 5;
+ unsigned int fr : 5;
+ unsigned int opcode : 6;
+};
+
+#else /* !defined (__MIPSEB__) && !defined (__MIPSEL__) */
+#error "MIPS but neither __MIPSEL__ nor __MIPSEB__?"
+#endif
+
+union mips_instruction {
+ unsigned int word;
+ unsigned short halfword[2];
+ unsigned char byte[4];
+ struct j_format j_format;
+ struct i_format i_format;
+ struct u_format u_format;
+ struct c_format c_format;
+ struct r_format r_format;
+ struct f_format f_format;
+ struct ma_format ma_format;
+};
+
+/* HACHACHAHCAHC ... */
+
+/* In case some other massaging is needed, keep MIPSInst as wrapper */
+
+#define MIPSInst(x) x
+
+#define I_OPCODE_SFT 26
+#define MIPSInst_OPCODE(x) (MIPSInst(x) >> I_OPCODE_SFT)
+
+#define I_JTARGET_SFT 0
+#define MIPSInst_JTARGET(x) (MIPSInst(x) & 0x03ffffff)
+
+#define I_RS_SFT 21
+#define MIPSInst_RS(x) ((MIPSInst(x) & 0x03e00000) >> I_RS_SFT)
+
+#define I_RT_SFT 16
+#define MIPSInst_RT(x) ((MIPSInst(x) & 0x001f0000) >> I_RT_SFT)
+
+#define I_IMM_SFT 0
+#define MIPSInst_SIMM(x) ((int)((short)(MIPSInst(x) & 0xffff)))
+#define MIPSInst_UIMM(x) (MIPSInst(x) & 0xffff)
+
+#define I_CACHEOP_SFT 18
+#define MIPSInst_CACHEOP(x) ((MIPSInst(x) & 0x001c0000) >> I_CACHEOP_SFT)
+
+#define I_CACHESEL_SFT 16
+#define MIPSInst_CACHESEL(x) ((MIPSInst(x) & 0x00030000) >> I_CACHESEL_SFT)
+
+#define I_RD_SFT 11
+#define MIPSInst_RD(x) ((MIPSInst(x) & 0x0000f800) >> I_RD_SFT)
+
+#define I_RE_SFT 6
+#define MIPSInst_RE(x) ((MIPSInst(x) & 0x000007c0) >> I_RE_SFT)
+
+#define I_FUNC_SFT 0
+#define MIPSInst_FUNC(x) (MIPSInst(x) & 0x0000003f)
+
+#define I_FFMT_SFT 21
+#define MIPSInst_FFMT(x) ((MIPSInst(x) & 0x01e00000) >> I_FFMT_SFT)
+
+#define I_FT_SFT 16
+#define MIPSInst_FT(x) ((MIPSInst(x) & 0x001f0000) >> I_FT_SFT)
+
+#define I_FS_SFT 11
+#define MIPSInst_FS(x) ((MIPSInst(x) & 0x0000f800) >> I_FS_SFT)
+
+#define I_FD_SFT 6
+#define MIPSInst_FD(x) ((MIPSInst(x) & 0x000007c0) >> I_FD_SFT)
+
+#define I_FR_SFT 21
+#define MIPSInst_FR(x) ((MIPSInst(x) & 0x03e00000) >> I_FR_SFT)
+
+#define I_FMA_FUNC_SFT 2
+#define MIPSInst_FMA_FUNC(x) ((MIPSInst(x) & 0x0000003c) >> I_FMA_FUNC_SFT)
+
+#define I_FMA_FFMT_SFT 0
+#define MIPSInst_FMA_FFMT(x) (MIPSInst(x) & 0x00000003)
+
+typedef unsigned int mips_instruction;
+
+#endif /* _ASM_INST_H */
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
new file mode 100644
index 00000000000..501a40b9f18
--- /dev/null
+++ b/arch/mips/include/asm/io.h
@@ -0,0 +1,589 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995 Waldorf GmbH
+ * Copyright (C) 1994 - 2000, 06 Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
+ * Author: Maciej W. Rozycki <macro@mips.com>
+ */
+#ifndef _ASM_IO_H
+#define _ASM_IO_H
+
+#include <linux/compiler.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#include <asm/addrspace.h>
+#include <asm/byteorder.h>
+#include <asm/cpu.h>
+#include <asm/cpu-features.h>
+#include <asm-generic/iomap.h>
+#include <asm/page.h>
+#include <asm/pgtable-bits.h>
+#include <asm/processor.h>
+#include <asm/string.h>
+
+#include <ioremap.h>
+#include <mangle-port.h>
+
+/*
+ * Slowdown I/O port space accesses for antique hardware.
+ */
+#undef CONF_SLOWDOWN_IO
+
+/*
+ * Raw operations are never swapped in software. OTOH values that raw
+ * operations are working on may or may not have been swapped by the bus
+ * hardware. An example use would be for flash memory that's used for
+ * execute in place.
+ */
+# define __raw_ioswabb(a, x) (x)
+# define __raw_ioswabw(a, x) (x)
+# define __raw_ioswabl(a, x) (x)
+# define __raw_ioswabq(a, x) (x)
+# define ____raw_ioswabq(a, x) (x)
+
+/* ioswab[bwlq], __mem_ioswab[bwlq] are defined in mangle-port.h */
+
+#define IO_SPACE_LIMIT 0xffff
+
+/*
+ * On MIPS I/O ports are memory mapped, so we access them using normal
+ * load/store instructions. mips_io_port_base is the virtual address to
+ * which all ports are being mapped. For sake of efficiency some code
+ * assumes that this is an address that can be loaded with a single lui
+ * instruction, so the lower 16 bits must be zero. Should be true on
+ * on any sane architecture; generic code does not use this assumption.
+ */
+extern const unsigned long mips_io_port_base;
+
+/*
+ * Gcc will generate code to load the value of mips_io_port_base after each
+ * function call which may be fairly wasteful in some cases. So we don't
+ * play quite by the book. We tell gcc mips_io_port_base is a long variable
+ * which solves the code generation issue. Now we need to violate the
+ * aliasing rules a little to make initialization possible and finally we
+ * will need the barrier() to fight side effects of the aliasing chat.
+ * This trickery will eventually collapse under gcc's optimizer. Oh well.
+ */
+static inline void set_io_port_base(unsigned long base)
+{
+ * (unsigned long *) &mips_io_port_base = base;
+ barrier();
+}
+
+/*
+ * Thanks to James van Artsdalen for a better timing-fix than
+ * the two short jumps: using outb's to a nonexistent port seems
+ * to guarantee better timings even on fast machines.
+ *
+ * On the other hand, I'd like to be sure of a non-existent port:
+ * I feel a bit unsafe about using 0x80 (should be safe, though)
+ *
+ * Linus
+ *
+ */
+
+#define __SLOW_DOWN_IO \
+ __asm__ __volatile__( \
+ "sb\t$0,0x80(%0)" \
+ : : "r" (mips_io_port_base));
+
+#ifdef CONF_SLOWDOWN_IO
+#ifdef REALLY_SLOW_IO
+#define SLOW_DOWN_IO { __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; __SLOW_DOWN_IO; }
+#else
+#define SLOW_DOWN_IO __SLOW_DOWN_IO
+#endif
+#else
+#define SLOW_DOWN_IO
+#endif
+
+/*
+ * virt_to_phys - map virtual addresses to physical
+ * @address: address to remap
+ *
+ * The returned physical address is the physical (CPU) mapping for
+ * the memory address given. It is only valid to use this function on
+ * addresses directly mapped or allocated via kmalloc.
+ *
+ * This function does not give bus mappings for DMA transfers. In
+ * almost all conceivable cases a device driver should not be using
+ * this function
+ */
+static inline unsigned long virt_to_phys(volatile const void *address)
+{
+ return (unsigned long)address - PAGE_OFFSET + PHYS_OFFSET;
+}
+
+/*
+ * phys_to_virt - map physical address to virtual
+ * @address: address to remap
+ *
+ * The returned virtual address is a current CPU mapping for
+ * the memory address given. It is only valid to use this function on
+ * addresses that have a kernel mapping
+ *
+ * This function does not handle bus mappings for DMA transfers. In
+ * almost all conceivable cases a device driver should not be using
+ * this function
+ */
+static inline void * phys_to_virt(unsigned long address)
+{
+ return (void *)(address + PAGE_OFFSET - PHYS_OFFSET);
+}
+
+/*
+ * ISA I/O bus memory addresses are 1:1 with the physical address.
+ */
+static inline unsigned long isa_virt_to_bus(volatile void * address)
+{
+ return (unsigned long)address - PAGE_OFFSET;
+}
+
+static inline void * isa_bus_to_virt(unsigned long address)
+{
+ return (void *)(address + PAGE_OFFSET);
+}
+
+#define isa_page_to_bus page_to_phys
+
+/*
+ * However PCI ones are not necessarily 1:1 and therefore these interfaces
+ * are forbidden in portable PCI drivers.
+ *
+ * Allow them for x86 for legacy drivers, though.
+ */
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+/*
+ * Change "struct page" to physical address.
+ */
+#define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
+
+extern void __iomem * __ioremap(phys_t offset, phys_t size, unsigned long flags);
+extern void __iounmap(const volatile void __iomem *addr);
+
+static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size,
+ unsigned long flags)
+{
+ void __iomem *addr = plat_ioremap(offset, size, flags);
+
+ if (addr)
+ return addr;
+
+#define __IS_LOW512(addr) (!((phys_t)(addr) & (phys_t) ~0x1fffffffULL))
+
+ if (cpu_has_64bit_addresses) {
+ u64 base = UNCAC_BASE;
+
+ /*
+ * R10000 supports a 2 bit uncached attribute therefore
+ * UNCAC_BASE may not equal IO_BASE.
+ */
+ if (flags == _CACHE_UNCACHED)
+ base = (u64) IO_BASE;
+ return (void __iomem *) (unsigned long) (base + offset);
+ } else if (__builtin_constant_p(offset) &&
+ __builtin_constant_p(size) && __builtin_constant_p(flags)) {
+ phys_t phys_addr, last_addr;
+
+ phys_addr = fixup_bigphys_addr(offset, size);
+
+ /* Don't allow wraparound or zero size. */
+ last_addr = phys_addr + size - 1;
+ if (!size || last_addr < phys_addr)
+ return NULL;
+
+ /*
+ * Map uncached objects in the low 512MB of address
+ * space using KSEG1.
+ */
+ if (__IS_LOW512(phys_addr) && __IS_LOW512(last_addr) &&
+ flags == _CACHE_UNCACHED)
+ return (void __iomem *)
+ (unsigned long)CKSEG1ADDR(phys_addr);
+ }
+
+ return __ioremap(offset, size, flags);
+
+#undef __IS_LOW512
+}
+
+/*
+ * ioremap - map bus memory into CPU space
+ * @offset: bus address of the memory
+ * @size: size of the resource to map
+ *
+ * ioremap performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ */
+#define ioremap(offset, size) \
+ __ioremap_mode((offset), (size), _CACHE_UNCACHED)
+
+/*
+ * ioremap_nocache - map bus memory into CPU space
+ * @offset: bus address of the memory
+ * @size: size of the resource to map
+ *
+ * ioremap_nocache performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ *
+ * This version of ioremap ensures that the memory is marked uncachable
+ * on the CPU as well as honouring existing caching rules from things like
+ * the PCI bus. Note that there are other caches and buffers on many
+ * busses. In paticular driver authors should read up on PCI writes
+ *
+ * It's useful if some control registers are in such an area and
+ * write combining or read caching is not desirable:
+ */
+#define ioremap_nocache(offset, size) \
+ __ioremap_mode((offset), (size), _CACHE_UNCACHED)
+
+/*
+ * ioremap_cachable - map bus memory into CPU space
+ * @offset: bus address of the memory
+ * @size: size of the resource to map
+ *
+ * ioremap_nocache performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ *
+ * This version of ioremap ensures that the memory is marked cachable by
+ * the CPU. Also enables full write-combining. Useful for some
+ * memory-like regions on I/O busses.
+ */
+#define ioremap_cachable(offset, size) \
+ __ioremap_mode((offset), (size), _page_cachable_default)
+
+/*
+ * These two are MIPS specific ioremap variant. ioremap_cacheable_cow
+ * requests a cachable mapping, ioremap_uncached_accelerated requests a
+ * mapping using the uncached accelerated mode which isn't supported on
+ * all processors.
+ */
+#define ioremap_cacheable_cow(offset, size) \
+ __ioremap_mode((offset), (size), _CACHE_CACHABLE_COW)
+#define ioremap_uncached_accelerated(offset, size) \
+ __ioremap_mode((offset), (size), _CACHE_UNCACHED_ACCELERATED)
+
+static inline void iounmap(const volatile void __iomem *addr)
+{
+ if (plat_iounmap(addr))
+ return;
+
+#define __IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == CKSEG1)
+
+ if (cpu_has_64bit_addresses ||
+ (__builtin_constant_p(addr) && __IS_KSEG1(addr)))
+ return;
+
+ __iounmap(addr);
+
+#undef __IS_KSEG1
+}
+
+#define __BUILD_MEMORY_SINGLE(pfx, bwlq, type, irq) \
+ \
+static inline void pfx##write##bwlq(type val, \
+ volatile void __iomem *mem) \
+{ \
+ volatile type *__mem; \
+ type __val; \
+ \
+ __mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem)); \
+ \
+ __val = pfx##ioswab##bwlq(__mem, val); \
+ \
+ if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \
+ *__mem = __val; \
+ else if (cpu_has_64bits) { \
+ unsigned long __flags; \
+ type __tmp; \
+ \
+ if (irq) \
+ local_irq_save(__flags); \
+ __asm__ __volatile__( \
+ ".set mips3" "\t\t# __writeq""\n\t" \
+ "dsll32 %L0, %L0, 0" "\n\t" \
+ "dsrl32 %L0, %L0, 0" "\n\t" \
+ "dsll32 %M0, %M0, 0" "\n\t" \
+ "or %L0, %L0, %M0" "\n\t" \
+ "sd %L0, %2" "\n\t" \
+ ".set mips0" "\n" \
+ : "=r" (__tmp) \
+ : "0" (__val), "m" (*__mem)); \
+ if (irq) \
+ local_irq_restore(__flags); \
+ } else \
+ BUG(); \
+} \
+ \
+static inline type pfx##read##bwlq(const volatile void __iomem *mem) \
+{ \
+ volatile type *__mem; \
+ type __val; \
+ \
+ __mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem)); \
+ \
+ if (sizeof(type) != sizeof(u64) || sizeof(u64) == sizeof(long)) \
+ __val = *__mem; \
+ else if (cpu_has_64bits) { \
+ unsigned long __flags; \
+ \
+ if (irq) \
+ local_irq_save(__flags); \
+ __asm__ __volatile__( \
+ ".set mips3" "\t\t# __readq" "\n\t" \
+ "ld %L0, %1" "\n\t" \
+ "dsra32 %M0, %L0, 0" "\n\t" \
+ "sll %L0, %L0, 0" "\n\t" \
+ ".set mips0" "\n" \
+ : "=r" (__val) \
+ : "m" (*__mem)); \
+ if (irq) \
+ local_irq_restore(__flags); \
+ } else { \
+ __val = 0; \
+ BUG(); \
+ } \
+ \
+ return pfx##ioswab##bwlq(__mem, __val); \
+}
+
+#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, p, slow) \
+ \
+static inline void pfx##out##bwlq##p(type val, unsigned long port) \
+{ \
+ volatile type *__addr; \
+ type __val; \
+ \
+ __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \
+ \
+ __val = pfx##ioswab##bwlq(__addr, val); \
+ \
+ /* Really, we want this to be atomic */ \
+ BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
+ \
+ *__addr = __val; \
+ slow; \
+} \
+ \
+static inline type pfx##in##bwlq##p(unsigned long port) \
+{ \
+ volatile type *__addr; \
+ type __val; \
+ \
+ __addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \
+ \
+ BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
+ \
+ __val = *__addr; \
+ slow; \
+ \
+ return pfx##ioswab##bwlq(__addr, __val); \
+}
+
+#define __BUILD_MEMORY_PFX(bus, bwlq, type) \
+ \
+__BUILD_MEMORY_SINGLE(bus, bwlq, type, 1)
+
+#define BUILDIO_MEM(bwlq, type) \
+ \
+__BUILD_MEMORY_PFX(__raw_, bwlq, type) \
+__BUILD_MEMORY_PFX(, bwlq, type) \
+__BUILD_MEMORY_PFX(__mem_, bwlq, type) \
+
+BUILDIO_MEM(b, u8)
+BUILDIO_MEM(w, u16)
+BUILDIO_MEM(l, u32)
+BUILDIO_MEM(q, u64)
+
+#define __BUILD_IOPORT_PFX(bus, bwlq, type) \
+ __BUILD_IOPORT_SINGLE(bus, bwlq, type, ,) \
+ __BUILD_IOPORT_SINGLE(bus, bwlq, type, _p, SLOW_DOWN_IO)
+
+#define BUILDIO_IOPORT(bwlq, type) \
+ __BUILD_IOPORT_PFX(, bwlq, type) \
+ __BUILD_IOPORT_PFX(__mem_, bwlq, type)
+
+BUILDIO_IOPORT(b, u8)
+BUILDIO_IOPORT(w, u16)
+BUILDIO_IOPORT(l, u32)
+#ifdef CONFIG_64BIT
+BUILDIO_IOPORT(q, u64)
+#endif
+
+#define __BUILDIO(bwlq, type) \
+ \
+__BUILD_MEMORY_SINGLE(____raw_, bwlq, type, 0)
+
+__BUILDIO(q, u64)
+
+#define readb_relaxed readb
+#define readw_relaxed readw
+#define readl_relaxed readl
+#define readq_relaxed readq
+
+/*
+ * Some code tests for these symbols
+ */
+#define readq readq
+#define writeq writeq
+
+#define __BUILD_MEMORY_STRING(bwlq, type) \
+ \
+static inline void writes##bwlq(volatile void __iomem *mem, \
+ const void *addr, unsigned int count) \
+{ \
+ const volatile type *__addr = addr; \
+ \
+ while (count--) { \
+ __mem_write##bwlq(*__addr, mem); \
+ __addr++; \
+ } \
+} \
+ \
+static inline void reads##bwlq(volatile void __iomem *mem, void *addr, \
+ unsigned int count) \
+{ \
+ volatile type *__addr = addr; \
+ \
+ while (count--) { \
+ *__addr = __mem_read##bwlq(mem); \
+ __addr++; \
+ } \
+}
+
+#define __BUILD_IOPORT_STRING(bwlq, type) \
+ \
+static inline void outs##bwlq(unsigned long port, const void *addr, \
+ unsigned int count) \
+{ \
+ const volatile type *__addr = addr; \
+ \
+ while (count--) { \
+ __mem_out##bwlq(*__addr, port); \
+ __addr++; \
+ } \
+} \
+ \
+static inline void ins##bwlq(unsigned long port, void *addr, \
+ unsigned int count) \
+{ \
+ volatile type *__addr = addr; \
+ \
+ while (count--) { \
+ *__addr = __mem_in##bwlq(port); \
+ __addr++; \
+ } \
+}
+
+#define BUILDSTRING(bwlq, type) \
+ \
+__BUILD_MEMORY_STRING(bwlq, type) \
+__BUILD_IOPORT_STRING(bwlq, type)
+
+BUILDSTRING(b, u8)
+BUILDSTRING(w, u16)
+BUILDSTRING(l, u32)
+#ifdef CONFIG_64BIT
+BUILDSTRING(q, u64)
+#endif
+
+
+/* Depends on MIPS II instruction set */
+#define mmiowb() asm volatile ("sync" ::: "memory")
+
+static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count)
+{
+ memset((void __force *) addr, val, count);
+}
+static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count)
+{
+ memcpy(dst, (void __force *) src, count);
+}
+static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count)
+{
+ memcpy((void __force *) dst, src, count);
+}
+
+/*
+ * The caches on some architectures aren't dma-coherent and have need to
+ * handle this in software. There are three types of operations that
+ * can be applied to dma buffers.
+ *
+ * - dma_cache_wback_inv(start, size) makes caches and coherent by
+ * writing the content of the caches back to memory, if necessary.
+ * The function also invalidates the affected part of the caches as
+ * necessary before DMA transfers from outside to memory.
+ * - dma_cache_wback(start, size) makes caches and coherent by
+ * writing the content of the caches back to memory, if necessary.
+ * The function also invalidates the affected part of the caches as
+ * necessary before DMA transfers from outside to memory.
+ * - dma_cache_inv(start, size) invalidates the affected parts of the
+ * caches. Dirty lines of the caches may be written back or simply
+ * be discarded. This operation is necessary before dma operations
+ * to the memory.
+ *
+ * This API used to be exported; it now is for arch code internal use only.
+ */
+#ifdef CONFIG_DMA_NONCOHERENT
+
+extern void (*_dma_cache_wback_inv)(unsigned long start, unsigned long size);
+extern void (*_dma_cache_wback)(unsigned long start, unsigned long size);
+extern void (*_dma_cache_inv)(unsigned long start, unsigned long size);
+
+#define dma_cache_wback_inv(start, size) _dma_cache_wback_inv(start, size)
+#define dma_cache_wback(start, size) _dma_cache_wback(start, size)
+#define dma_cache_inv(start, size) _dma_cache_inv(start, size)
+
+#else /* Sane hardware */
+
+#define dma_cache_wback_inv(start,size) \
+ do { (void) (start); (void) (size); } while (0)
+#define dma_cache_wback(start,size) \
+ do { (void) (start); (void) (size); } while (0)
+#define dma_cache_inv(start,size) \
+ do { (void) (start); (void) (size); } while (0)
+
+#endif /* CONFIG_DMA_NONCOHERENT */
+
+/*
+ * Read a 32-bit register that requires a 64-bit read cycle on the bus.
+ * Avoid interrupt mucking, just adjust the address for 4-byte access.
+ * Assume the addresses are 8-byte aligned.
+ */
+#ifdef __MIPSEB__
+#define __CSR_32_ADJUST 4
+#else
+#define __CSR_32_ADJUST 0
+#endif
+
+#define csr_out32(v, a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST) = (v))
+#define csr_in32(a) (*(volatile u32 *)((unsigned long)(a) + __CSR_32_ADJUST))
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p) __va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p) p
+
+#endif /* _ASM_IO_H */
diff --git a/arch/mips/include/asm/ioctl.h b/arch/mips/include/asm/ioctl.h
new file mode 100644
index 00000000000..85067e248a8
--- /dev/null
+++ b/arch/mips/include/asm/ioctl.h
@@ -0,0 +1,94 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 96, 99, 2001 Ralf Baechle
+ */
+#ifndef _ASM_IOCTL_H
+#define _ASM_IOCTL_H
+
+/*
+ * The original linux ioctl numbering scheme was just a general
+ * "anything goes" setup, where more or less random numbers were
+ * assigned. Sorry, I was clueless when I started out on this.
+ *
+ * On the alpha, we'll try to clean it up a bit, using a more sane
+ * ioctl numbering, and also trying to be compatible with OSF/1 in
+ * the process. I'd like to clean it up for the i386 as well, but
+ * it's so painful recognizing both the new and the old numbers..
+ *
+ * The same applies for for the MIPS ABI; in fact even the macros
+ * from Linux/Alpha fit almost perfectly.
+ */
+
+#define _IOC_NRBITS 8
+#define _IOC_TYPEBITS 8
+#define _IOC_SIZEBITS 13
+#define _IOC_DIRBITS 3
+
+#define _IOC_NRMASK ((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK ((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK ((1 << _IOC_SIZEBITS)-1)
+#define _IOC_DIRMASK ((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT 0
+#define _IOC_TYPESHIFT (_IOC_NRSHIFT+_IOC_NRBITS)
+#define _IOC_SIZESHIFT (_IOC_TYPESHIFT+_IOC_TYPEBITS)
+#define _IOC_DIRSHIFT (_IOC_SIZESHIFT+_IOC_SIZEBITS)
+
+/*
+ * Direction bits _IOC_NONE could be 0, but OSF/1 gives it a bit.
+ * And this turns out useful to catch old ioctl numbers in header
+ * files for us.
+ */
+#define _IOC_NONE 1U
+#define _IOC_READ 2U
+#define _IOC_WRITE 4U
+
+/*
+ * The following are included for compatibility
+ */
+#define _IOC_VOID 0x20000000
+#define _IOC_OUT 0x40000000
+#define _IOC_IN 0x80000000
+#define _IOC_INOUT (IOC_IN|IOC_OUT)
+
+#define _IOC(dir, type, nr, size) \
+ (((dir) << _IOC_DIRSHIFT) | \
+ ((type) << _IOC_TYPESHIFT) | \
+ ((nr) << _IOC_NRSHIFT) | \
+ ((size) << _IOC_SIZESHIFT))
+
+/* provoke compile error for invalid uses of size argument */
+extern unsigned int __invalid_size_argument_for_IOC;
+#define _IOC_TYPECHECK(t) \
+ ((sizeof(t) == sizeof(t[1]) && \
+ sizeof(t) < (1 << _IOC_SIZEBITS)) ? \
+ sizeof(t) : __invalid_size_argument_for_IOC)
+
+/* used to create numbers */
+#define _IO(type, nr) _IOC(_IOC_NONE, (type), (nr), 0)
+#define _IOR(type, nr, size) _IOC(_IOC_READ, (type), (nr), (_IOC_TYPECHECK(size)))
+#define _IOW(type, nr, size) _IOC(_IOC_WRITE, (type), (nr), (_IOC_TYPECHECK(size)))
+#define _IOWR(type, nr, size) _IOC(_IOC_READ|_IOC_WRITE, (type), (nr), (_IOC_TYPECHECK(size)))
+#define _IOR_BAD(type, nr, size) _IOC(_IOC_READ, (type), (nr), sizeof(size))
+#define _IOW_BAD(type, nr, size) _IOC(_IOC_WRITE, (type), (nr), sizeof(size))
+#define _IOWR_BAD(type, nr, size) _IOC(_IOC_READ|_IOC_WRITE, (type), (nr), sizeof(size))
+
+
+/* used to decode them.. */
+#define _IOC_DIR(nr) (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
+#define _IOC_TYPE(nr) (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr) (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr) (((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
+
+/* ...and for the drivers/sound files... */
+
+#define IOC_IN (_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT (_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK (_IOC_SIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT (_IOC_SIZESHIFT)
+
+#endif /* _ASM_IOCTL_H */
diff --git a/arch/mips/include/asm/ioctls.h b/arch/mips/include/asm/ioctls.h
new file mode 100644
index 00000000000..3f04a995ec5
--- /dev/null
+++ b/arch/mips/include/asm/ioctls.h
@@ -0,0 +1,109 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1996, 2001 Ralf Baechle
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ */
+#ifndef __ASM_IOCTLS_H
+#define __ASM_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+#define TCGETA 0x5401
+#define TCSETA 0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */
+#define TCSETAW 0x5403
+#define TCSETAF 0x5404
+
+#define TCSBRK 0x5405
+#define TCXONC 0x5406
+#define TCFLSH 0x5407
+
+#define TCGETS 0x540d
+#define TCSETS 0x540e
+#define TCSETSW 0x540f
+#define TCSETSF 0x5410
+
+#define TIOCEXCL 0x740d /* set exclusive use of tty */
+#define TIOCNXCL 0x740e /* reset exclusive use of tty */
+#define TIOCOUTQ 0x7472 /* output queue size */
+#define TIOCSTI 0x5472 /* simulate terminal input */
+#define TIOCMGET 0x741d /* get all modem bits */
+#define TIOCMBIS 0x741b /* bis modem bits */
+#define TIOCMBIC 0x741c /* bic modem bits */
+#define TIOCMSET 0x741a /* set all modem bits */
+#define TIOCPKT 0x5470 /* pty: set/clear packet mode */
+#define TIOCPKT_DATA 0x00 /* data packet */
+#define TIOCPKT_FLUSHREAD 0x01 /* flush packet */
+#define TIOCPKT_FLUSHWRITE 0x02 /* flush packet */
+#define TIOCPKT_STOP 0x04 /* stop output */
+#define TIOCPKT_START 0x08 /* start output */
+#define TIOCPKT_NOSTOP 0x10 /* no more ^S, ^Q */
+#define TIOCPKT_DOSTOP 0x20 /* now do ^S ^Q */
+/* #define TIOCPKT_IOCTL 0x40 state change of pty driver */
+#define TIOCSWINSZ _IOW('t', 103, struct winsize) /* set window size */
+#define TIOCGWINSZ _IOR('t', 104, struct winsize) /* get window size */
+#define TIOCNOTTY 0x5471 /* void tty association */
+#define TIOCSETD 0x7401
+#define TIOCGETD 0x7400
+
+#define FIOCLEX 0x6601
+#define FIONCLEX 0x6602
+#define FIOASYNC 0x667d
+#define FIONBIO 0x667e
+#define FIOQSIZE 0x667f
+
+#define TIOCGLTC 0x7474 /* get special local chars */
+#define TIOCSLTC 0x7475 /* set special local chars */
+#define TIOCSPGRP _IOW('t', 118, int) /* set pgrp of tty */
+#define TIOCGPGRP _IOR('t', 119, int) /* get pgrp of tty */
+#define TIOCCONS _IOW('t', 120, int) /* become virtual console */
+
+#define FIONREAD 0x467f
+#define TIOCINQ FIONREAD
+
+#define TIOCGETP 0x7408
+#define TIOCSETP 0x7409
+#define TIOCSETN 0x740a /* TIOCSETP wo flush */
+
+/* #define TIOCSETA _IOW('t', 20, struct termios) set termios struct */
+/* #define TIOCSETAW _IOW('t', 21, struct termios) drain output, set */
+/* #define TIOCSETAF _IOW('t', 22, struct termios) drn out, fls in, set */
+/* #define TIOCGETD _IOR('t', 26, int) get line discipline */
+/* #define TIOCSETD _IOW('t', 27, int) set line discipline */
+ /* 127-124 compat */
+
+#define TIOCSBRK 0x5427 /* BSD compatibility */
+#define TIOCCBRK 0x5428 /* BSD compatibility */
+#define TIOCGSID 0x7416 /* Return the session ID of FD */
+#define TCGETS2 _IOR('T', 0x2A, struct termios2)
+#define TCSETS2 _IOW('T', 0x2B, struct termios2)
+#define TCSETSW2 _IOW('T', 0x2C, struct termios2)
+#define TCSETSF2 _IOW('T', 0x2D, struct termios2)
+#define TIOCGPTN _IOR('T', 0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */
+
+/* I hope the range from 0x5480 on is free ... */
+#define TIOCSCTTY 0x5480 /* become controlling tty */
+#define TIOCGSOFTCAR 0x5481
+#define TIOCSSOFTCAR 0x5482
+#define TIOCLINUX 0x5483
+#define TIOCGSERIAL 0x5484
+#define TIOCSSERIAL 0x5485
+#define TCSBRKP 0x5486 /* Needed for POSIX tcsendbreak() */
+#define TIOCSERCONFIG 0x5488
+#define TIOCSERGWILD 0x5489
+#define TIOCSERSWILD 0x548a
+#define TIOCGLCKTRMIOS 0x548b
+#define TIOCSLCKTRMIOS 0x548c
+#define TIOCSERGSTRUCT 0x548d /* For debugging only */
+#define TIOCSERGETLSR 0x548e /* Get line status register */
+#define TIOCSERGETMULTI 0x548f /* Get multiport config */
+#define TIOCSERSETMULTI 0x5490 /* Set multiport config */
+#define TIOCMIWAIT 0x5491 /* wait for a change on serial input line(s) */
+#define TIOCGICOUNT 0x5492 /* read serial port inline interrupt counts */
+#define TIOCGHAYESESP 0x5493 /* Get Hayes ESP configuration */
+#define TIOCSHAYESESP 0x5494 /* Set Hayes ESP configuration */
+
+#endif /* __ASM_IOCTLS_H */
diff --git a/arch/mips/include/asm/ip32/crime.h b/arch/mips/include/asm/ip32/crime.h
new file mode 100644
index 00000000000..7c36b0e5b1c
--- /dev/null
+++ b/arch/mips/include/asm/ip32/crime.h
@@ -0,0 +1,158 @@
+/*
+ * Definitions for the SGI CRIME (CPU, Rendering, Interconnect and Memory
+ * Engine)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000 Harald Koerfgen
+ */
+
+#ifndef __ASM_CRIME_H__
+#define __ASM_CRIME_H__
+
+/*
+ * Address map
+ */
+#define CRIME_BASE 0x14000000 /* physical */
+
+struct sgi_crime {
+ volatile unsigned long id;
+#define CRIME_ID_MASK 0xff
+#define CRIME_ID_IDBITS 0xf0
+#define CRIME_ID_IDVALUE 0xa0
+#define CRIME_ID_REV 0x0f
+#define CRIME_REV_PETTY 0x00
+#define CRIME_REV_11 0x11
+#define CRIME_REV_13 0x13
+#define CRIME_REV_14 0x14
+
+ volatile unsigned long control;
+#define CRIME_CONTROL_MASK 0x3fff
+#define CRIME_CONTROL_TRITON_SYSADC 0x2000
+#define CRIME_CONTROL_CRIME_SYSADC 0x1000
+#define CRIME_CONTROL_HARD_RESET 0x0800
+#define CRIME_CONTROL_SOFT_RESET 0x0400
+#define CRIME_CONTROL_DOG_ENA 0x0200
+#define CRIME_CONTROL_ENDIANESS 0x0100
+#define CRIME_CONTROL_ENDIAN_BIG 0x0100
+#define CRIME_CONTROL_ENDIAN_LITTLE 0x0000
+#define CRIME_CONTROL_CQUEUE_HWM 0x000f
+#define CRIME_CONTROL_CQUEUE_SHFT 0
+#define CRIME_CONTROL_WBUF_HWM 0x00f0
+#define CRIME_CONTROL_WBUF_SHFT 8
+
+ volatile unsigned long istat;
+ volatile unsigned long imask;
+ volatile unsigned long soft_int;
+ volatile unsigned long hard_int;
+#define MACE_VID_IN1_INT BIT(0)
+#define MACE_VID_IN2_INT BIT(1)
+#define MACE_VID_OUT_INT BIT(2)
+#define MACE_ETHERNET_INT BIT(3)
+#define MACE_SUPERIO_INT BIT(4)
+#define MACE_MISC_INT BIT(5)
+#define MACE_AUDIO_INT BIT(6)
+#define MACE_PCI_BRIDGE_INT BIT(7)
+#define MACEPCI_SCSI0_INT BIT(8)
+#define MACEPCI_SCSI1_INT BIT(9)
+#define MACEPCI_SLOT0_INT BIT(10)
+#define MACEPCI_SLOT1_INT BIT(11)
+#define MACEPCI_SLOT2_INT BIT(12)
+#define MACEPCI_SHARED0_INT BIT(13)
+#define MACEPCI_SHARED1_INT BIT(14)
+#define MACEPCI_SHARED2_INT BIT(15)
+#define CRIME_GBE0_INT BIT(16)
+#define CRIME_GBE1_INT BIT(17)
+#define CRIME_GBE2_INT BIT(18)
+#define CRIME_GBE3_INT BIT(19)
+#define CRIME_CPUERR_INT BIT(20)
+#define CRIME_MEMERR_INT BIT(21)
+#define CRIME_RE_EMPTY_E_INT BIT(22)
+#define CRIME_RE_FULL_E_INT BIT(23)
+#define CRIME_RE_IDLE_E_INT BIT(24)
+#define CRIME_RE_EMPTY_L_INT BIT(25)
+#define CRIME_RE_FULL_L_INT BIT(26)
+#define CRIME_RE_IDLE_L_INT BIT(27)
+#define CRIME_SOFT0_INT BIT(28)
+#define CRIME_SOFT1_INT BIT(29)
+#define CRIME_SOFT2_INT BIT(30)
+#define CRIME_SYSCORERR_INT CRIME_SOFT2_INT
+#define CRIME_VICE_INT BIT(31)
+/* Masks for deciding who handles the interrupt */
+#define CRIME_MACE_INT_MASK 0x8f
+#define CRIME_MACEISA_INT_MASK 0x70
+#define CRIME_MACEPCI_INT_MASK 0xff00
+#define CRIME_CRIME_INT_MASK 0xffff0000
+
+ volatile unsigned long watchdog;
+#define CRIME_DOG_POWER_ON_RESET 0x00010000
+#define CRIME_DOG_WARM_RESET 0x00080000
+#define CRIME_DOG_TIMEOUT (CRIME_DOG_POWER_ON_RESET|CRIME_DOG_WARM_RESET)
+#define CRIME_DOG_VALUE 0x00007fff
+
+ volatile unsigned long timer;
+#define CRIME_MASTER_FREQ 66666500 /* Crime upcounter frequency */
+#define CRIME_NS_PER_TICK 15 /* for delay_calibrate */
+
+ volatile unsigned long cpu_error_addr;
+#define CRIME_CPU_ERROR_ADDR_MASK 0x3ffffffff
+
+ volatile unsigned long cpu_error_stat;
+#define CRIME_CPU_ERROR_MASK 0x7 /* cpu error stat is 3 bits */
+#define CRIME_CPU_ERROR_CPU_ILL_ADDR 0x4
+#define CRIME_CPU_ERROR_VICE_WRT_PRTY 0x2
+#define CRIME_CPU_ERROR_CPU_WRT_PRTY 0x1
+
+ unsigned long _pad0[54];
+
+ volatile unsigned long mc_ctrl;
+ volatile unsigned long bank_ctrl[8];
+#define CRIME_MEM_BANK_CONTROL_MASK 0x11f /* 9 bits 7:5 reserved */
+#define CRIME_MEM_BANK_CONTROL_ADDR 0x01f
+#define CRIME_MEM_BANK_CONTROL_SDRAM_SIZE 0x100
+#define CRIME_MAXBANKS 8
+
+ volatile unsigned long mem_ref_counter;
+#define CRIME_MEM_REF_COUNTER_MASK 0x3ff /* 10bit */
+
+ volatile unsigned long mem_error_stat;
+#define CRIME_MEM_ERROR_STAT_MASK 0x0ff7ffff /* 28-bit register */
+#define CRIME_MEM_ERROR_MACE_ID 0x0000007f
+#define CRIME_MEM_ERROR_MACE_ACCESS 0x00000080
+#define CRIME_MEM_ERROR_RE_ID 0x00007f00
+#define CRIME_MEM_ERROR_RE_ACCESS 0x00008000
+#define CRIME_MEM_ERROR_GBE_ACCESS 0x00010000
+#define CRIME_MEM_ERROR_VICE_ACCESS 0x00020000
+#define CRIME_MEM_ERROR_CPU_ACCESS 0x00040000
+#define CRIME_MEM_ERROR_RESERVED 0x00080000
+#define CRIME_MEM_ERROR_SOFT_ERR 0x00100000
+#define CRIME_MEM_ERROR_HARD_ERR 0x00200000
+#define CRIME_MEM_ERROR_MULTIPLE 0x00400000
+#define CRIME_MEM_ERROR_ECC 0x01800000
+#define CRIME_MEM_ERROR_MEM_ECC_RD 0x00800000
+#define CRIME_MEM_ERROR_MEM_ECC_RMW 0x01000000
+#define CRIME_MEM_ERROR_INV 0x0e000000
+#define CRIME_MEM_ERROR_INV_MEM_ADDR_RD 0x02000000
+#define CRIME_MEM_ERROR_INV_MEM_ADDR_WR 0x04000000
+#define CRIME_MEM_ERROR_INV_MEM_ADDR_RMW 0x08000000
+
+ volatile unsigned long mem_error_addr;
+#define CRIME_MEM_ERROR_ADDR_MASK 0x3fffffff
+
+ volatile unsigned long mem_ecc_syn;
+#define CRIME_MEM_ERROR_ECC_SYN_MASK 0xffffffff
+
+ volatile unsigned long mem_ecc_chk;
+#define CRIME_MEM_ERROR_ECC_CHK_MASK 0xffffffff
+
+ volatile unsigned long mem_ecc_repl;
+#define CRIME_MEM_ERROR_ECC_REPL_MASK 0xffffffff
+};
+
+extern struct sgi_crime __iomem *crime;
+
+#define CRIME_HI_MEM_BASE 0x40000000 /* this is where whole 1G of RAM is mapped */
+
+#endif /* __ASM_CRIME_H__ */
diff --git a/arch/mips/include/asm/ip32/ip32_ints.h b/arch/mips/include/asm/ip32/ip32_ints.h
new file mode 100644
index 00000000000..85bc5302bce
--- /dev/null
+++ b/arch/mips/include/asm/ip32/ip32_ints.h
@@ -0,0 +1,114 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000 Harald Koerfgen
+ */
+
+#ifndef __ASM_IP32_INTS_H
+#define __ASM_IP32_INTS_H
+
+#include <asm/irq.h>
+
+/*
+ * This list reflects the assignment of interrupt numbers to
+ * interrupting events. Order is fairly irrelevant to handling
+ * priority. This differs from irix.
+ */
+
+enum ip32_irq_no {
+ /*
+ * CPU interrupts are 0 ... 7
+ */
+
+ CRIME_IRQ_BASE = MIPS_CPU_IRQ_BASE + 8,
+
+ /*
+ * MACE
+ */
+ MACE_VID_IN1_IRQ = CRIME_IRQ_BASE,
+ MACE_VID_IN2_IRQ,
+ MACE_VID_OUT_IRQ,
+ MACE_ETHERNET_IRQ,
+ /* SUPERIO, MISC, and AUDIO are MACEISA */
+ __MACE_SUPERIO,
+ __MACE_MISC,
+ __MACE_AUDIO,
+ MACE_PCI_BRIDGE_IRQ,
+
+ /*
+ * MACEPCI
+ */
+ MACEPCI_SCSI0_IRQ,
+ MACEPCI_SCSI1_IRQ,
+ MACEPCI_SLOT0_IRQ,
+ MACEPCI_SLOT1_IRQ,
+ MACEPCI_SLOT2_IRQ,
+ MACEPCI_SHARED0_IRQ,
+ MACEPCI_SHARED1_IRQ,
+ MACEPCI_SHARED2_IRQ,
+
+ /*
+ * CRIME
+ */
+ CRIME_GBE0_IRQ,
+ CRIME_GBE1_IRQ,
+ CRIME_GBE2_IRQ,
+ CRIME_GBE3_IRQ,
+ CRIME_CPUERR_IRQ,
+ CRIME_MEMERR_IRQ,
+ CRIME_RE_EMPTY_E_IRQ,
+ CRIME_RE_FULL_E_IRQ,
+ CRIME_RE_IDLE_E_IRQ,
+ CRIME_RE_EMPTY_L_IRQ,
+ CRIME_RE_FULL_L_IRQ,
+ CRIME_RE_IDLE_L_IRQ,
+ CRIME_SOFT0_IRQ,
+ CRIME_SOFT1_IRQ,
+ CRIME_SOFT2_IRQ,
+ CRIME_SYSCORERR_IRQ = CRIME_SOFT2_IRQ,
+ CRIME_VICE_IRQ,
+
+ /*
+ * MACEISA
+ */
+ MACEISA_AUDIO_SW_IRQ,
+ MACEISA_AUDIO_SC_IRQ,
+ MACEISA_AUDIO1_DMAT_IRQ,
+ MACEISA_AUDIO1_OF_IRQ,
+ MACEISA_AUDIO2_DMAT_IRQ,
+ MACEISA_AUDIO2_MERR_IRQ,
+ MACEISA_AUDIO3_DMAT_IRQ,
+ MACEISA_AUDIO3_MERR_IRQ,
+ MACEISA_RTC_IRQ,
+ MACEISA_KEYB_IRQ,
+ /* MACEISA_KEYB_POLL is not an IRQ */
+ __MACEISA_KEYB_POLL,
+ MACEISA_MOUSE_IRQ,
+ /* MACEISA_MOUSE_POLL is not an IRQ */
+ __MACEISA_MOUSE_POLL,
+ MACEISA_TIMER0_IRQ,
+ MACEISA_TIMER1_IRQ,
+ MACEISA_TIMER2_IRQ,
+ MACEISA_PARALLEL_IRQ,
+ MACEISA_PAR_CTXA_IRQ,
+ MACEISA_PAR_CTXB_IRQ,
+ MACEISA_PAR_MERR_IRQ,
+ MACEISA_SERIAL1_IRQ,
+ MACEISA_SERIAL1_TDMAT_IRQ,
+ MACEISA_SERIAL1_TDMAPR_IRQ,
+ MACEISA_SERIAL1_TDMAME_IRQ,
+ MACEISA_SERIAL1_RDMAT_IRQ,
+ MACEISA_SERIAL1_RDMAOR_IRQ,
+ MACEISA_SERIAL2_IRQ,
+ MACEISA_SERIAL2_TDMAT_IRQ,
+ MACEISA_SERIAL2_TDMAPR_IRQ,
+ MACEISA_SERIAL2_TDMAME_IRQ,
+ MACEISA_SERIAL2_RDMAT_IRQ,
+ MACEISA_SERIAL2_RDMAOR_IRQ,
+
+ IP32_IRQ_MAX = MACEISA_SERIAL2_RDMAOR_IRQ
+};
+
+#endif /* __ASM_IP32_INTS_H */
diff --git a/arch/mips/include/asm/ip32/mace.h b/arch/mips/include/asm/ip32/mace.h
new file mode 100644
index 00000000000..d08d7c67213
--- /dev/null
+++ b/arch/mips/include/asm/ip32/mace.h
@@ -0,0 +1,365 @@
+/*
+ * Definitions for the SGI MACE (Multimedia, Audio and Communications Engine)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000 Harald Koerfgen
+ * Copyright (C) 2004 Ladislav Michl
+ */
+
+#ifndef __ASM_MACE_H__
+#define __ASM_MACE_H__
+
+/*
+ * Address map
+ */
+#define MACE_BASE 0x1f000000 /* physical */
+
+/*
+ * PCI interface
+ */
+struct mace_pci {
+ volatile unsigned int error_addr;
+ volatile unsigned int error;
+#define MACEPCI_ERROR_MASTER_ABORT BIT(31)
+#define MACEPCI_ERROR_TARGET_ABORT BIT(30)
+#define MACEPCI_ERROR_DATA_PARITY_ERR BIT(29)
+#define MACEPCI_ERROR_RETRY_ERR BIT(28)
+#define MACEPCI_ERROR_ILLEGAL_CMD BIT(27)
+#define MACEPCI_ERROR_SYSTEM_ERR BIT(26)
+#define MACEPCI_ERROR_INTERRUPT_TEST BIT(25)
+#define MACEPCI_ERROR_PARITY_ERR BIT(24)
+#define MACEPCI_ERROR_OVERRUN BIT(23)
+#define MACEPCI_ERROR_RSVD BIT(22)
+#define MACEPCI_ERROR_MEMORY_ADDR BIT(21)
+#define MACEPCI_ERROR_CONFIG_ADDR BIT(20)
+#define MACEPCI_ERROR_MASTER_ABORT_ADDR_VALID BIT(19)
+#define MACEPCI_ERROR_TARGET_ABORT_ADDR_VALID BIT(18)
+#define MACEPCI_ERROR_DATA_PARITY_ADDR_VALID BIT(17)
+#define MACEPCI_ERROR_RETRY_ADDR_VALID BIT(16)
+#define MACEPCI_ERROR_SIG_TABORT BIT(4)
+#define MACEPCI_ERROR_DEVSEL_MASK 0xc0
+#define MACEPCI_ERROR_DEVSEL_FAST 0
+#define MACEPCI_ERROR_DEVSEL_MED 0x40
+#define MACEPCI_ERROR_DEVSEL_SLOW 0x80
+#define MACEPCI_ERROR_FBB BIT(1)
+#define MACEPCI_ERROR_66MHZ BIT(0)
+ volatile unsigned int control;
+#define MACEPCI_CONTROL_INT(x) BIT(x)
+#define MACEPCI_CONTROL_INT_MASK 0xff
+#define MACEPCI_CONTROL_SERR_ENA BIT(8)
+#define MACEPCI_CONTROL_ARB_N6 BIT(9)
+#define MACEPCI_CONTROL_PARITY_ERR BIT(10)
+#define MACEPCI_CONTROL_MRMRA_ENA BIT(11)
+#define MACEPCI_CONTROL_ARB_N3 BIT(12)
+#define MACEPCI_CONTROL_ARB_N4 BIT(13)
+#define MACEPCI_CONTROL_ARB_N5 BIT(14)
+#define MACEPCI_CONTROL_PARK_LIU BIT(15)
+#define MACEPCI_CONTROL_INV_INT(x) BIT(16+x)
+#define MACEPCI_CONTROL_INV_INT_MASK 0x00ff0000
+#define MACEPCI_CONTROL_OVERRUN_INT BIT(24)
+#define MACEPCI_CONTROL_PARITY_INT BIT(25)
+#define MACEPCI_CONTROL_SERR_INT BIT(26)
+#define MACEPCI_CONTROL_IT_INT BIT(27)
+#define MACEPCI_CONTROL_RE_INT BIT(28)
+#define MACEPCI_CONTROL_DPED_INT BIT(29)
+#define MACEPCI_CONTROL_TAR_INT BIT(30)
+#define MACEPCI_CONTROL_MAR_INT BIT(31)
+ volatile unsigned int rev;
+ unsigned int _pad[0xcf8/4 - 4];
+ volatile unsigned int config_addr;
+ union {
+ volatile unsigned char b[4];
+ volatile unsigned short w[2];
+ volatile unsigned int l;
+ } config_data;
+};
+#define MACEPCI_LOW_MEMORY 0x1a000000
+#define MACEPCI_LOW_IO 0x18000000
+#define MACEPCI_SWAPPED_VIEW 0
+#define MACEPCI_NATIVE_VIEW 0x40000000
+#define MACEPCI_IO 0x80000000
+#define MACEPCI_HI_MEMORY 0x280000000
+#define MACEPCI_HI_IO 0x100000000
+
+/*
+ * Video interface
+ */
+struct mace_video {
+ unsigned long xxx; /* later... */
+};
+
+/*
+ * Ethernet interface
+ */
+struct mace_ethernet {
+ volatile unsigned long mac_ctrl;
+ volatile unsigned long int_stat;
+ volatile unsigned long dma_ctrl;
+ volatile unsigned long timer;
+ volatile unsigned long tx_int_al;
+ volatile unsigned long rx_int_al;
+ volatile unsigned long tx_info;
+ volatile unsigned long tx_info_al;
+ volatile unsigned long rx_buff;
+ volatile unsigned long rx_buff_al1;
+ volatile unsigned long rx_buff_al2;
+ volatile unsigned long diag;
+ volatile unsigned long phy_data;
+ volatile unsigned long phy_regs;
+ volatile unsigned long phy_trans_go;
+ volatile unsigned long backoff_seed;
+ /*===================================*/
+ volatile unsigned long imq_reserved[4];
+ volatile unsigned long mac_addr;
+ volatile unsigned long mac_addr2;
+ volatile unsigned long mcast_filter;
+ volatile unsigned long tx_ring_base;
+ /* Following are read-only registers for debugging */
+ volatile unsigned long tx_pkt1_hdr;
+ volatile unsigned long tx_pkt1_ptr[3];
+ volatile unsigned long tx_pkt2_hdr;
+ volatile unsigned long tx_pkt2_ptr[3];
+ /*===================================*/
+ volatile unsigned long rx_fifo;
+};
+
+/*
+ * Peripherals
+ */
+
+/* Audio registers */
+struct mace_audio {
+ volatile unsigned long control;
+ volatile unsigned long codec_control; /* codec status control */
+ volatile unsigned long codec_mask; /* codec status input mask */
+ volatile unsigned long codec_read; /* codec status read data */
+ struct {
+ volatile unsigned long control; /* channel control */
+ volatile unsigned long read_ptr; /* channel read pointer */
+ volatile unsigned long write_ptr; /* channel write pointer */
+ volatile unsigned long depth; /* channel depth */
+ } chan[3];
+};
+
+
+/* register definitions for parallel port DMA */
+struct mace_parport {
+ /* 0 - do nothing,
+ * 1 - pulse terminal count to the device after buffer is drained */
+#define MACEPAR_CONTEXT_LASTFLAG BIT(63)
+ /* Should not cross 4K page boundary */
+#define MACEPAR_CONTEXT_DATA_BOUND 0x0000000000001000UL
+#define MACEPAR_CONTEXT_DATALEN_MASK 0x00000fff00000000UL
+#define MACEPAR_CONTEXT_DATALEN_SHIFT 32
+ /* Can be arbitrarily aligned on any byte boundary on output,
+ * 64 byte aligned on input */
+#define MACEPAR_CONTEXT_BASEADDR_MASK 0x00000000ffffffffUL
+ volatile u64 context_a;
+ volatile u64 context_b;
+ /* 0 - mem->device, 1 - device->mem */
+#define MACEPAR_CTLSTAT_DIRECTION BIT(0)
+ /* 0 - channel frozen, 1 - channel enabled */
+#define MACEPAR_CTLSTAT_ENABLE BIT(1)
+ /* 0 - channel active, 1 - complete channel reset */
+#define MACEPAR_CTLSTAT_RESET BIT(2)
+#define MACEPAR_CTLSTAT_CTXB_VALID BIT(3)
+#define MACEPAR_CTLSTAT_CTXA_VALID BIT(4)
+ volatile u64 cntlstat; /* Control/Status register */
+#define MACEPAR_DIAG_CTXINUSE BIT(0)
+ /* 1 - Dma engine is enabled and processing something */
+#define MACEPAR_DIAG_DMACTIVE BIT(1)
+ /* Counter of bytes left */
+#define MACEPAR_DIAG_CTRMASK 0x0000000000003ffcUL
+#define MACEPAR_DIAG_CTRSHIFT 2
+ volatile u64 diagnostic; /* RO: diagnostic register */
+};
+
+/* ISA Control and DMA registers */
+struct mace_isactrl {
+ volatile unsigned long ringbase;
+#define MACEISA_RINGBUFFERS_SIZE (8 * 4096)
+
+ volatile unsigned long misc;
+#define MACEISA_FLASH_WE BIT(0) /* 1=> Enable FLASH writes */
+#define MACEISA_PWD_CLEAR BIT(1) /* 1=> PWD CLEAR jumper detected */
+#define MACEISA_NIC_DEASSERT BIT(2)
+#define MACEISA_NIC_DATA BIT(3)
+#define MACEISA_LED_RED BIT(4) /* 0=> Illuminate red LED */
+#define MACEISA_LED_GREEN BIT(5) /* 0=> Illuminate green LED */
+#define MACEISA_DP_RAM_ENABLE BIT(6)
+
+ volatile unsigned long istat;
+ volatile unsigned long imask;
+#define MACEISA_AUDIO_SW_INT BIT(0)
+#define MACEISA_AUDIO_SC_INT BIT(1)
+#define MACEISA_AUDIO1_DMAT_INT BIT(2)
+#define MACEISA_AUDIO1_OF_INT BIT(3)
+#define MACEISA_AUDIO2_DMAT_INT BIT(4)
+#define MACEISA_AUDIO2_MERR_INT BIT(5)
+#define MACEISA_AUDIO3_DMAT_INT BIT(6)
+#define MACEISA_AUDIO3_MERR_INT BIT(7)
+#define MACEISA_RTC_INT BIT(8)
+#define MACEISA_KEYB_INT BIT(9)
+#define MACEISA_KEYB_POLL_INT BIT(10)
+#define MACEISA_MOUSE_INT BIT(11)
+#define MACEISA_MOUSE_POLL_INT BIT(12)
+#define MACEISA_TIMER0_INT BIT(13)
+#define MACEISA_TIMER1_INT BIT(14)
+#define MACEISA_TIMER2_INT BIT(15)
+#define MACEISA_PARALLEL_INT BIT(16)
+#define MACEISA_PAR_CTXA_INT BIT(17)
+#define MACEISA_PAR_CTXB_INT BIT(18)
+#define MACEISA_PAR_MERR_INT BIT(19)
+#define MACEISA_SERIAL1_INT BIT(20)
+#define MACEISA_SERIAL1_TDMAT_INT BIT(21)
+#define MACEISA_SERIAL1_TDMAPR_INT BIT(22)
+#define MACEISA_SERIAL1_TDMAME_INT BIT(23)
+#define MACEISA_SERIAL1_RDMAT_INT BIT(24)
+#define MACEISA_SERIAL1_RDMAOR_INT BIT(25)
+#define MACEISA_SERIAL2_INT BIT(26)
+#define MACEISA_SERIAL2_TDMAT_INT BIT(27)
+#define MACEISA_SERIAL2_TDMAPR_INT BIT(28)
+#define MACEISA_SERIAL2_TDMAME_INT BIT(29)
+#define MACEISA_SERIAL2_RDMAT_INT BIT(30)
+#define MACEISA_SERIAL2_RDMAOR_INT BIT(31)
+
+ volatile unsigned long _pad[0x2000/8 - 4];
+
+ volatile unsigned long dp_ram[0x400];
+ struct mace_parport parport;
+};
+
+/* Keyboard & Mouse registers
+ * -> drivers/input/serio/maceps2.c */
+struct mace_ps2port {
+ volatile unsigned long tx;
+ volatile unsigned long rx;
+ volatile unsigned long control;
+ volatile unsigned long status;
+};
+
+struct mace_ps2 {
+ struct mace_ps2port keyb;
+ struct mace_ps2port mouse;
+};
+
+/* I2C registers
+ * -> drivers/i2c/algos/i2c-algo-sgi.c */
+struct mace_i2c {
+ volatile unsigned long config;
+#define MACEI2C_RESET BIT(0)
+#define MACEI2C_FAST BIT(1)
+#define MACEI2C_DATA_OVERRIDE BIT(2)
+#define MACEI2C_CLOCK_OVERRIDE BIT(3)
+#define MACEI2C_DATA_STATUS BIT(4)
+#define MACEI2C_CLOCK_STATUS BIT(5)
+ volatile unsigned long control;
+ volatile unsigned long data;
+};
+
+/* Timer registers */
+typedef union {
+ volatile unsigned long ust_msc;
+ struct reg {
+ volatile unsigned int ust;
+ volatile unsigned int msc;
+ } reg;
+} timer_reg;
+
+struct mace_timers {
+ volatile unsigned long ust;
+#define MACE_UST_PERIOD_NS 960
+
+ volatile unsigned long compare1;
+ volatile unsigned long compare2;
+ volatile unsigned long compare3;
+
+ timer_reg audio_in;
+ timer_reg audio_out1;
+ timer_reg audio_out2;
+ timer_reg video_in1;
+ timer_reg video_in2;
+ timer_reg video_out;
+};
+
+struct mace_perif {
+ struct mace_audio audio;
+ char _pad0[0x10000 - sizeof(struct mace_audio)];
+
+ struct mace_isactrl ctrl;
+ char _pad1[0x10000 - sizeof(struct mace_isactrl)];
+
+ struct mace_ps2 ps2;
+ char _pad2[0x10000 - sizeof(struct mace_ps2)];
+
+ struct mace_i2c i2c;
+ char _pad3[0x10000 - sizeof(struct mace_i2c)];
+
+ struct mace_timers timers;
+ char _pad4[0x10000 - sizeof(struct mace_timers)];
+};
+
+
+/*
+ * ISA peripherals
+ */
+
+/* Parallel port */
+struct mace_parallel {
+};
+
+struct mace_ecp1284 { /* later... */
+};
+
+/* Serial port */
+struct mace_serial {
+ volatile unsigned long xxx; /* later... */
+};
+
+struct mace_isa {
+ struct mace_parallel parallel;
+ char _pad1[0x8000 - sizeof(struct mace_parallel)];
+
+ struct mace_ecp1284 ecp1284;
+ char _pad2[0x8000 - sizeof(struct mace_ecp1284)];
+
+ struct mace_serial serial1;
+ char _pad3[0x8000 - sizeof(struct mace_serial)];
+
+ struct mace_serial serial2;
+ char _pad4[0x8000 - sizeof(struct mace_serial)];
+
+ volatile unsigned char rtc[0x10000];
+};
+
+struct sgi_mace {
+ char _reserved[0x80000];
+
+ struct mace_pci pci;
+ char _pad0[0x80000 - sizeof(struct mace_pci)];
+
+ struct mace_video video_in1;
+ char _pad1[0x80000 - sizeof(struct mace_video)];
+
+ struct mace_video video_in2;
+ char _pad2[0x80000 - sizeof(struct mace_video)];
+
+ struct mace_video video_out;
+ char _pad3[0x80000 - sizeof(struct mace_video)];
+
+ struct mace_ethernet eth;
+ char _pad4[0x80000 - sizeof(struct mace_ethernet)];
+
+ struct mace_perif perif;
+ char _pad5[0x80000 - sizeof(struct mace_perif)];
+
+ struct mace_isa isa;
+ char _pad6[0x80000 - sizeof(struct mace_isa)];
+};
+
+extern struct sgi_mace __iomem *mace;
+
+#endif /* __ASM_MACE_H__ */
diff --git a/arch/mips/include/asm/ipcbuf.h b/arch/mips/include/asm/ipcbuf.h
new file mode 100644
index 00000000000..d47d08f264e
--- /dev/null
+++ b/arch/mips/include/asm/ipcbuf.h
@@ -0,0 +1,28 @@
+#ifndef _ASM_IPCBUF_H
+#define _ASM_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for alpha architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit seq
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct ipc64_perm
+{
+ __kernel_key_t key;
+ __kernel_uid_t uid;
+ __kernel_gid_t gid;
+ __kernel_uid_t cuid;
+ __kernel_gid_t cgid;
+ __kernel_mode_t mode;
+ unsigned short seq;
+ unsigned short __pad1;
+ unsigned long __unused1;
+ unsigned long __unused2;
+};
+
+#endif /* _ASM_IPCBUF_H */
diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h
new file mode 100644
index 00000000000..a58f0eecc68
--- /dev/null
+++ b/arch/mips/include/asm/irq.h
@@ -0,0 +1,163 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 by Waldorf GMBH, written by Ralf Baechle
+ * Copyright (C) 1995, 96, 97, 98, 99, 2000, 01, 02, 03 by Ralf Baechle
+ */
+#ifndef _ASM_IRQ_H
+#define _ASM_IRQ_H
+
+#include <linux/linkage.h>
+
+#include <asm/mipsmtregs.h>
+
+#include <irq.h>
+
+#ifdef CONFIG_I8259
+static inline int irq_canonicalize(int irq)
+{
+ return ((irq == I8259A_IRQ_BASE + 2) ? I8259A_IRQ_BASE + 9 : irq);
+}
+#else
+#define irq_canonicalize(irq) (irq) /* Sane hardware, sane code ... */
+#endif
+
+#ifdef CONFIG_MIPS_MT_SMTC
+
+struct irqaction;
+
+extern unsigned long irq_hwmask[];
+extern int setup_irq_smtc(unsigned int irq, struct irqaction * new,
+ unsigned long hwmask);
+
+static inline void smtc_im_ack_irq(unsigned int irq)
+{
+ if (irq_hwmask[irq] & ST0_IM)
+ set_c0_status(irq_hwmask[irq] & ST0_IM);
+}
+
+#else
+
+static inline void smtc_im_ack_irq(unsigned int irq)
+{
+}
+
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
+#include <linux/cpumask.h>
+
+extern void plat_set_irq_affinity(unsigned int irq, cpumask_t affinity);
+extern void smtc_forward_irq(unsigned int irq);
+
+/*
+ * IRQ affinity hook invoked at the beginning of interrupt dispatch
+ * if option is enabled.
+ *
+ * Up through Linux 2.6.22 (at least) cpumask operations are very
+ * inefficient on MIPS. Initial prototypes of SMTC IRQ affinity
+ * used a "fast path" per-IRQ-descriptor cache of affinity information
+ * to reduce latency. As there is a project afoot to optimize the
+ * cpumask implementations, this version is optimistically assuming
+ * that cpumask.h macro overhead is reasonable during interrupt dispatch.
+ */
+#define IRQ_AFFINITY_HOOK(irq) \
+do { \
+ if (!cpu_isset(smp_processor_id(), irq_desc[irq].affinity)) { \
+ smtc_forward_irq(irq); \
+ irq_exit(); \
+ return; \
+ } \
+} while (0)
+
+#else /* Not doing SMTC affinity */
+
+#define IRQ_AFFINITY_HOOK(irq) do { } while (0)
+
+#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */
+
+#ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP
+
+/*
+ * Clear interrupt mask handling "backstop" if irq_hwmask
+ * entry so indicates. This implies that the ack() or end()
+ * functions will take over re-enabling the low-level mask.
+ * Otherwise it will be done on return from exception.
+ */
+#define __DO_IRQ_SMTC_HOOK(irq) \
+do { \
+ IRQ_AFFINITY_HOOK(irq); \
+ if (irq_hwmask[irq] & 0x0000ff00) \
+ write_c0_tccontext(read_c0_tccontext() & \
+ ~(irq_hwmask[irq] & 0x0000ff00)); \
+} while (0)
+
+#define __NO_AFFINITY_IRQ_SMTC_HOOK(irq) \
+do { \
+ if (irq_hwmask[irq] & 0x0000ff00) \
+ write_c0_tccontext(read_c0_tccontext() & \
+ ~(irq_hwmask[irq] & 0x0000ff00)); \
+} while (0)
+
+#else
+
+#define __DO_IRQ_SMTC_HOOK(irq) \
+do { \
+ IRQ_AFFINITY_HOOK(irq); \
+} while (0)
+#define __NO_AFFINITY_IRQ_SMTC_HOOK(irq) do { } while (0)
+
+#endif
+
+/*
+ * do_IRQ handles all normal device IRQ's (the special
+ * SMP cross-CPU interrupts have their own specific
+ * handlers).
+ *
+ * Ideally there should be away to get this into kernel/irq/handle.c to
+ * avoid the overhead of a call for just a tiny function ...
+ */
+#define do_IRQ(irq) \
+do { \
+ irq_enter(); \
+ __DO_IRQ_SMTC_HOOK(irq); \
+ generic_handle_irq(irq); \
+ irq_exit(); \
+} while (0)
+
+#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
+/*
+ * To avoid inefficient and in some cases pathological re-checking of
+ * IRQ affinity, we have this variant that skips the affinity check.
+ */
+
+
+#define do_IRQ_no_affinity(irq) \
+do { \
+ irq_enter(); \
+ __NO_AFFINITY_IRQ_SMTC_HOOK(irq); \
+ generic_handle_irq(irq); \
+ irq_exit(); \
+} while (0)
+
+#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */
+
+extern void arch_init_irq(void);
+extern void spurious_interrupt(void);
+
+extern int allocate_irqno(void);
+extern void alloc_legacy_irqno(void);
+extern void free_irqno(unsigned int irq);
+
+/*
+ * Before R2 the timer and performance counter interrupts were both fixed to
+ * IE7. Since R2 their number has to be read from the c0_intctl register.
+ */
+#define CP0_LEGACY_COMPARE_IRQ 7
+
+extern int cp0_compare_irq;
+extern int cp0_perfcount_irq;
+
+#endif /* _ASM_IRQ_H */
diff --git a/arch/mips/include/asm/irq_cpu.h b/arch/mips/include/asm/irq_cpu.h
new file mode 100644
index 00000000000..ef6a07cddb2
--- /dev/null
+++ b/arch/mips/include/asm/irq_cpu.h
@@ -0,0 +1,20 @@
+/*
+ * include/asm-mips/irq_cpu.h
+ *
+ * MIPS CPU interrupt definitions.
+ *
+ * Copyright (C) 2002 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_IRQ_CPU_H
+#define _ASM_IRQ_CPU_H
+
+extern void mips_cpu_irq_init(void);
+extern void rm7k_cpu_irq_init(void);
+extern void rm9k_cpu_irq_init(void);
+
+#endif /* _ASM_IRQ_CPU_H */
diff --git a/arch/mips/include/asm/irq_gt641xx.h b/arch/mips/include/asm/irq_gt641xx.h
new file mode 100644
index 00000000000..f9a7c3ac2e6
--- /dev/null
+++ b/arch/mips/include/asm/irq_gt641xx.h
@@ -0,0 +1,60 @@
+/*
+ * Galileo/Marvell GT641xx IRQ definitions.
+ *
+ * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#ifndef _ASM_IRQ_GT641XX_H
+#define _ASM_IRQ_GT641XX_H
+
+#ifndef GT641XX_IRQ_BASE
+#define GT641XX_IRQ_BASE 8
+#endif
+
+#define GT641XX_MEMORY_OUT_OF_RANGE_IRQ (GT641XX_IRQ_BASE + 1)
+#define GT641XX_DMA_OUT_OF_RANGE_IRQ (GT641XX_IRQ_BASE + 2)
+#define GT641XX_CPU_ACCESS_OUT_OF_RANGE_IRQ (GT641XX_IRQ_BASE + 3)
+#define GT641XX_DMA0_IRQ (GT641XX_IRQ_BASE + 4)
+#define GT641XX_DMA1_IRQ (GT641XX_IRQ_BASE + 5)
+#define GT641XX_DMA2_IRQ (GT641XX_IRQ_BASE + 6)
+#define GT641XX_DMA3_IRQ (GT641XX_IRQ_BASE + 7)
+#define GT641XX_TIMER0_IRQ (GT641XX_IRQ_BASE + 8)
+#define GT641XX_TIMER1_IRQ (GT641XX_IRQ_BASE + 9)
+#define GT641XX_TIMER2_IRQ (GT641XX_IRQ_BASE + 10)
+#define GT641XX_TIMER3_IRQ (GT641XX_IRQ_BASE + 11)
+#define GT641XX_PCI_0_MASTER_READ_ERROR_IRQ (GT641XX_IRQ_BASE + 12)
+#define GT641XX_PCI_0_SLAVE_WRITE_ERROR_IRQ (GT641XX_IRQ_BASE + 13)
+#define GT641XX_PCI_0_MASTER_WRITE_ERROR_IRQ (GT641XX_IRQ_BASE + 14)
+#define GT641XX_PCI_0_SLAVE_READ_ERROR_IRQ (GT641XX_IRQ_BASE + 15)
+#define GT641XX_PCI_0_ADDRESS_ERROR_IRQ (GT641XX_IRQ_BASE + 16)
+#define GT641XX_MEMORY_ERROR_IRQ (GT641XX_IRQ_BASE + 17)
+#define GT641XX_PCI_0_MASTER_ABORT_IRQ (GT641XX_IRQ_BASE + 18)
+#define GT641XX_PCI_0_TARGET_ABORT_IRQ (GT641XX_IRQ_BASE + 19)
+#define GT641XX_PCI_0_RETRY_TIMEOUT_IRQ (GT641XX_IRQ_BASE + 20)
+#define GT641XX_CPU_INT0_IRQ (GT641XX_IRQ_BASE + 21)
+#define GT641XX_CPU_INT1_IRQ (GT641XX_IRQ_BASE + 22)
+#define GT641XX_CPU_INT2_IRQ (GT641XX_IRQ_BASE + 23)
+#define GT641XX_CPU_INT3_IRQ (GT641XX_IRQ_BASE + 24)
+#define GT641XX_CPU_INT4_IRQ (GT641XX_IRQ_BASE + 25)
+#define GT641XX_PCI_INT0_IRQ (GT641XX_IRQ_BASE + 26)
+#define GT641XX_PCI_INT1_IRQ (GT641XX_IRQ_BASE + 27)
+#define GT641XX_PCI_INT2_IRQ (GT641XX_IRQ_BASE + 28)
+#define GT641XX_PCI_INT3_IRQ (GT641XX_IRQ_BASE + 29)
+
+extern void gt641xx_irq_dispatch(void);
+extern void gt641xx_irq_init(void);
+
+#endif /* _ASM_IRQ_GT641XX_H */
diff --git a/arch/mips/include/asm/irq_regs.h b/arch/mips/include/asm/irq_regs.h
new file mode 100644
index 00000000000..33bd2a06de5
--- /dev/null
+++ b/arch/mips/include/asm/irq_regs.h
@@ -0,0 +1,21 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_IRQ_REGS_H
+#define __ASM_IRQ_REGS_H
+
+#define ARCH_HAS_OWN_IRQ_REGS
+
+#include <linux/thread_info.h>
+
+static inline struct pt_regs *get_irq_regs(void)
+{
+ return current_thread_info()->regs;
+}
+
+#endif /* __ASM_IRQ_REGS_H */
diff --git a/arch/mips/include/asm/irqflags.h b/arch/mips/include/asm/irqflags.h
new file mode 100644
index 00000000000..701ec0ba8fa
--- /dev/null
+++ b/arch/mips/include/asm/irqflags.h
@@ -0,0 +1,283 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 by Ralf Baechle
+ * Copyright (C) 1996 by Paul M. Antoine
+ * Copyright (C) 1999 Silicon Graphics
+ * Copyright (C) 2000 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_IRQFLAGS_H
+#define _ASM_IRQFLAGS_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/compiler.h>
+#include <asm/hazards.h>
+
+__asm__(
+ " .macro raw_local_irq_enable \n"
+ " .set push \n"
+ " .set reorder \n"
+ " .set noat \n"
+#ifdef CONFIG_MIPS_MT_SMTC
+ " mfc0 $1, $2, 1 # SMTC - clear TCStatus.IXMT \n"
+ " ori $1, 0x400 \n"
+ " xori $1, 0x400 \n"
+ " mtc0 $1, $2, 1 \n"
+#elif defined(CONFIG_CPU_MIPSR2)
+ " ei \n"
+#else
+ " mfc0 $1,$12 \n"
+ " ori $1,0x1f \n"
+ " xori $1,0x1e \n"
+ " mtc0 $1,$12 \n"
+#endif
+ " irq_enable_hazard \n"
+ " .set pop \n"
+ " .endm");
+
+extern void smtc_ipi_replay(void);
+
+static inline void raw_local_irq_enable(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+ /*
+ * SMTC kernel needs to do a software replay of queued
+ * IPIs, at the cost of call overhead on each local_irq_enable()
+ */
+ smtc_ipi_replay();
+#endif
+ __asm__ __volatile__(
+ "raw_local_irq_enable"
+ : /* no outputs */
+ : /* no inputs */
+ : "memory");
+}
+
+
+/*
+ * For cli() we have to insert nops to make sure that the new value
+ * has actually arrived in the status register before the end of this
+ * macro.
+ * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs
+ * no nops at all.
+ */
+/*
+ * For TX49, operating only IE bit is not enough.
+ *
+ * If mfc0 $12 follows store and the mfc0 is last instruction of a
+ * page and fetching the next instruction causes TLB miss, the result
+ * of the mfc0 might wrongly contain EXL bit.
+ *
+ * ERT-TX49H2-027, ERT-TX49H3-012, ERT-TX49HL3-006, ERT-TX49H4-008
+ *
+ * Workaround: mask EXL bit of the result or place a nop before mfc0.
+ */
+__asm__(
+ " .macro raw_local_irq_disable\n"
+ " .set push \n"
+ " .set noat \n"
+#ifdef CONFIG_MIPS_MT_SMTC
+ " mfc0 $1, $2, 1 \n"
+ " ori $1, 0x400 \n"
+ " .set noreorder \n"
+ " mtc0 $1, $2, 1 \n"
+#elif defined(CONFIG_CPU_MIPSR2)
+ " di \n"
+#else
+ " mfc0 $1,$12 \n"
+ " ori $1,0x1f \n"
+ " xori $1,0x1f \n"
+ " .set noreorder \n"
+ " mtc0 $1,$12 \n"
+#endif
+ " irq_disable_hazard \n"
+ " .set pop \n"
+ " .endm \n");
+
+static inline void raw_local_irq_disable(void)
+{
+ __asm__ __volatile__(
+ "raw_local_irq_disable"
+ : /* no outputs */
+ : /* no inputs */
+ : "memory");
+}
+
+__asm__(
+ " .macro raw_local_save_flags flags \n"
+ " .set push \n"
+ " .set reorder \n"
+#ifdef CONFIG_MIPS_MT_SMTC
+ " mfc0 \\flags, $2, 1 \n"
+#else
+ " mfc0 \\flags, $12 \n"
+#endif
+ " .set pop \n"
+ " .endm \n");
+
+#define raw_local_save_flags(x) \
+__asm__ __volatile__( \
+ "raw_local_save_flags %0" \
+ : "=r" (x))
+
+__asm__(
+ " .macro raw_local_irq_save result \n"
+ " .set push \n"
+ " .set reorder \n"
+ " .set noat \n"
+#ifdef CONFIG_MIPS_MT_SMTC
+ " mfc0 \\result, $2, 1 \n"
+ " ori $1, \\result, 0x400 \n"
+ " .set noreorder \n"
+ " mtc0 $1, $2, 1 \n"
+ " andi \\result, \\result, 0x400 \n"
+#elif defined(CONFIG_CPU_MIPSR2)
+ " di \\result \n"
+ " andi \\result, 1 \n"
+#else
+ " mfc0 \\result, $12 \n"
+ " ori $1, \\result, 0x1f \n"
+ " xori $1, 0x1f \n"
+ " .set noreorder \n"
+ " mtc0 $1, $12 \n"
+#endif
+ " irq_disable_hazard \n"
+ " .set pop \n"
+ " .endm \n");
+
+#define raw_local_irq_save(x) \
+__asm__ __volatile__( \
+ "raw_local_irq_save\t%0" \
+ : "=r" (x) \
+ : /* no inputs */ \
+ : "memory")
+
+__asm__(
+ " .macro raw_local_irq_restore flags \n"
+ " .set push \n"
+ " .set noreorder \n"
+ " .set noat \n"
+#ifdef CONFIG_MIPS_MT_SMTC
+ "mfc0 $1, $2, 1 \n"
+ "andi \\flags, 0x400 \n"
+ "ori $1, 0x400 \n"
+ "xori $1, 0x400 \n"
+ "or \\flags, $1 \n"
+ "mtc0 \\flags, $2, 1 \n"
+#elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
+ /*
+ * Slow, but doesn't suffer from a relativly unlikely race
+ * condition we're having since days 1.
+ */
+ " beqz \\flags, 1f \n"
+ " di \n"
+ " ei \n"
+ "1: \n"
+#elif defined(CONFIG_CPU_MIPSR2)
+ /*
+ * Fast, dangerous. Life is fun, life is good.
+ */
+ " mfc0 $1, $12 \n"
+ " ins $1, \\flags, 0, 1 \n"
+ " mtc0 $1, $12 \n"
+#else
+ " mfc0 $1, $12 \n"
+ " andi \\flags, 1 \n"
+ " ori $1, 0x1f \n"
+ " xori $1, 0x1f \n"
+ " or \\flags, $1 \n"
+ " mtc0 \\flags, $12 \n"
+#endif
+ " irq_disable_hazard \n"
+ " .set pop \n"
+ " .endm \n");
+
+
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+ unsigned long __tmp1;
+
+#ifdef CONFIG_MIPS_MT_SMTC
+ /*
+ * SMTC kernel needs to do a software replay of queued
+ * IPIs, at the cost of branch and call overhead on each
+ * local_irq_restore()
+ */
+ if (unlikely(!(flags & 0x0400)))
+ smtc_ipi_replay();
+#endif
+
+ __asm__ __volatile__(
+ "raw_local_irq_restore\t%0"
+ : "=r" (__tmp1)
+ : "0" (flags)
+ : "memory");
+}
+
+static inline void __raw_local_irq_restore(unsigned long flags)
+{
+ unsigned long __tmp1;
+
+ __asm__ __volatile__(
+ "raw_local_irq_restore\t%0"
+ : "=r" (__tmp1)
+ : "0" (flags)
+ : "memory");
+}
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+ /*
+ * SMTC model uses TCStatus.IXMT to disable interrupts for a thread/CPU
+ */
+ return flags & 0x400;
+#else
+ return !(flags & 1);
+#endif
+}
+
+#endif
+
+/*
+ * Do the CPU's IRQ-state tracing from assembly code.
+ */
+#ifdef CONFIG_TRACE_IRQFLAGS
+/* Reload some registers clobbered by trace_hardirqs_on */
+#ifdef CONFIG_64BIT
+# define TRACE_IRQS_RELOAD_REGS \
+ LONG_L $11, PT_R11(sp); \
+ LONG_L $10, PT_R10(sp); \
+ LONG_L $9, PT_R9(sp); \
+ LONG_L $8, PT_R8(sp); \
+ LONG_L $7, PT_R7(sp); \
+ LONG_L $6, PT_R6(sp); \
+ LONG_L $5, PT_R5(sp); \
+ LONG_L $4, PT_R4(sp); \
+ LONG_L $2, PT_R2(sp)
+#else
+# define TRACE_IRQS_RELOAD_REGS \
+ LONG_L $7, PT_R7(sp); \
+ LONG_L $6, PT_R6(sp); \
+ LONG_L $5, PT_R5(sp); \
+ LONG_L $4, PT_R4(sp); \
+ LONG_L $2, PT_R2(sp)
+#endif
+# define TRACE_IRQS_ON \
+ CLI; /* make sure trace_hardirqs_on() is called in kernel level */ \
+ jal trace_hardirqs_on
+# define TRACE_IRQS_ON_RELOAD \
+ TRACE_IRQS_ON; \
+ TRACE_IRQS_RELOAD_REGS
+# define TRACE_IRQS_OFF \
+ jal trace_hardirqs_off
+#else
+# define TRACE_IRQS_ON
+# define TRACE_IRQS_ON_RELOAD
+# define TRACE_IRQS_OFF
+#endif
+
+#endif /* _ASM_IRQFLAGS_H */
diff --git a/arch/mips/include/asm/isadep.h b/arch/mips/include/asm/isadep.h
new file mode 100644
index 00000000000..24c6cda7937
--- /dev/null
+++ b/arch/mips/include/asm/isadep.h
@@ -0,0 +1,34 @@
+/*
+ * Various ISA level dependent constants.
+ * Most of the following constants reflect the different layout
+ * of Coprocessor 0 registers.
+ *
+ * Copyright (c) 1998 Harald Koerfgen
+ */
+
+#ifndef __ASM_ISADEP_H
+#define __ASM_ISADEP_H
+
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+/*
+ * R2000 or R3000
+ */
+
+/*
+ * kernel or user mode? (CP0_STATUS)
+ */
+#define KU_MASK 0x08
+#define KU_USER 0x08
+#define KU_KERN 0x00
+
+#else
+/*
+ * kernel or user mode?
+ */
+#define KU_MASK 0x18
+#define KU_USER 0x10
+#define KU_KERN 0x00
+
+#endif
+
+#endif /* __ASM_ISADEP_H */
diff --git a/arch/mips/include/asm/jazz.h b/arch/mips/include/asm/jazz.h
new file mode 100644
index 00000000000..83f449dec95
--- /dev/null
+++ b/arch/mips/include/asm/jazz.h
@@ -0,0 +1,310 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995 - 1998 by Andreas Busse and Ralf Baechle
+ */
+#ifndef __ASM_JAZZ_H
+#define __ASM_JAZZ_H
+
+/*
+ * The addresses below are virtual address. The mappings are
+ * created on startup via wired entries in the tlb. The Mips
+ * Magnum R3000 and R4000 machines are similar in many aspects,
+ * but many hardware register are accessible at 0xb9000000 in
+ * instead of 0xe0000000.
+ */
+
+#define JAZZ_LOCAL_IO_SPACE 0xe0000000
+
+/*
+ * Revision numbers in PICA_ASIC_REVISION
+ *
+ * 0xf0000000 - Rev1
+ * 0xf0000001 - Rev2
+ * 0xf0000002 - Rev3
+ */
+#define PICA_ASIC_REVISION 0xe0000008
+
+/*
+ * The segments of the seven segment LED are mapped
+ * to the control bits as follows:
+ *
+ * (7)
+ * ---------
+ * | |
+ * (2) | | (6)
+ * | (1) |
+ * ---------
+ * | |
+ * (3) | | (5)
+ * | (4) |
+ * --------- . (0)
+ */
+#define PICA_LED 0xe000f000
+
+/*
+ * Some characters for the LED control registers
+ * The original Mips machines seem to have a LED display
+ * with integrated decoder while the Acer machines can
+ * control each of the seven segments and the dot independently.
+ * It's only a toy, anyway...
+ */
+#define LED_DOT 0x01
+#define LED_SPACE 0x00
+#define LED_0 0xfc
+#define LED_1 0x60
+#define LED_2 0xda
+#define LED_3 0xf2
+#define LED_4 0x66
+#define LED_5 0xb6
+#define LED_6 0xbe
+#define LED_7 0xe0
+#define LED_8 0xfe
+#define LED_9 0xf6
+#define LED_A 0xee
+#define LED_b 0x3e
+#define LED_C 0x9c
+#define LED_d 0x7a
+#define LED_E 0x9e
+#define LED_F 0x8e
+
+#ifndef __ASSEMBLY__
+
+static __inline__ void pica_set_led(unsigned int bits)
+{
+ volatile unsigned int *led_register = (unsigned int *) PICA_LED;
+
+ *led_register = bits;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Base address of the Sonic Ethernet adapter in Jazz machines.
+ */
+#define JAZZ_ETHERNET_BASE 0xe0001000
+
+/*
+ * Base address of the 53C94 SCSI hostadapter in Jazz machines.
+ */
+#define JAZZ_SCSI_BASE 0xe0002000
+
+/*
+ * i8042 keyboard controller for JAZZ and PICA chipsets.
+ * This address is just a guess and seems to differ from
+ * other mips machines such as RC3xxx...
+ */
+#define JAZZ_KEYBOARD_ADDRESS 0xe0005000
+#define JAZZ_KEYBOARD_DATA 0xe0005000
+#define JAZZ_KEYBOARD_COMMAND 0xe0005001
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+ unsigned char data;
+ unsigned char command;
+} jazz_keyboard_hardware;
+
+#define jazz_kh ((keyboard_hardware *) JAZZ_KEYBOARD_ADDRESS)
+
+typedef struct {
+ unsigned char pad0[3];
+ unsigned char data;
+ unsigned char pad1[3];
+ unsigned char command;
+} mips_keyboard_hardware;
+
+/*
+ * For now. Needs to be changed for RC3xxx support. See below.
+ */
+#define keyboard_hardware jazz_keyboard_hardware
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * i8042 keyboard controller for most other Mips machines.
+ */
+#define MIPS_KEYBOARD_ADDRESS 0xb9005000
+#define MIPS_KEYBOARD_DATA 0xb9005003
+#define MIPS_KEYBOARD_COMMAND 0xb9005007
+
+/*
+ * Serial and parallel ports (WD 16C552) on the Mips JAZZ
+ */
+#define JAZZ_SERIAL1_BASE (unsigned int)0xe0006000
+#define JAZZ_SERIAL2_BASE (unsigned int)0xe0007000
+#define JAZZ_PARALLEL_BASE (unsigned int)0xe0008000
+
+/*
+ * Dummy Device Address. Used in jazzdma.c
+ */
+#define JAZZ_DUMMY_DEVICE 0xe000d000
+
+/*
+ * JAZZ timer registers and interrupt no.
+ * Note that the hardware timer interrupt is actually on
+ * cpu level 6, but to keep compatibility with PC stuff
+ * it is remapped to vector 0. See arch/mips/kernel/entry.S.
+ */
+#define JAZZ_TIMER_INTERVAL 0xe0000228
+#define JAZZ_TIMER_REGISTER 0xe0000230
+
+/*
+ * DRAM configuration register
+ */
+#ifndef __ASSEMBLY__
+#ifdef __MIPSEL__
+typedef struct {
+ unsigned int bank2 : 3;
+ unsigned int bank1 : 3;
+ unsigned int mem_bus_width : 1;
+ unsigned int reserved2 : 1;
+ unsigned int page_mode : 1;
+ unsigned int reserved1 : 23;
+} dram_configuration;
+#else /* defined (__MIPSEB__) */
+typedef struct {
+ unsigned int reserved1 : 23;
+ unsigned int page_mode : 1;
+ unsigned int reserved2 : 1;
+ unsigned int mem_bus_width : 1;
+ unsigned int bank1 : 3;
+ unsigned int bank2 : 3;
+} dram_configuration;
+#endif
+#endif /* !__ASSEMBLY__ */
+
+#define PICA_DRAM_CONFIG 0xe00fffe0
+
+/*
+ * JAZZ interrupt control registers
+ */
+#define JAZZ_IO_IRQ_SOURCE 0xe0010000
+#define JAZZ_IO_IRQ_ENABLE 0xe0010002
+
+/*
+ * JAZZ Interrupt Level definitions
+ *
+ * This is somewhat broken. For reasons which nobody can remember anymore
+ * we remap the Jazz interrupts to the usual ISA style interrupt numbers.
+ */
+#define JAZZ_IRQ_START 24
+#define JAZZ_IRQ_END (24 + 9)
+#define JAZZ_PARALLEL_IRQ (JAZZ_IRQ_START + 0)
+#define JAZZ_FLOPPY_IRQ (JAZZ_IRQ_START + 1)
+#define JAZZ_SOUND_IRQ (JAZZ_IRQ_START + 2)
+#define JAZZ_VIDEO_IRQ (JAZZ_IRQ_START + 3)
+#define JAZZ_ETHERNET_IRQ (JAZZ_IRQ_START + 4)
+#define JAZZ_SCSI_IRQ (JAZZ_IRQ_START + 5)
+#define JAZZ_KEYBOARD_IRQ (JAZZ_IRQ_START + 6)
+#define JAZZ_MOUSE_IRQ (JAZZ_IRQ_START + 7)
+#define JAZZ_SERIAL1_IRQ (JAZZ_IRQ_START + 8)
+#define JAZZ_SERIAL2_IRQ (JAZZ_IRQ_START + 9)
+
+#define JAZZ_TIMER_IRQ (MIPS_CPU_IRQ_BASE+6)
+
+
+/*
+ * JAZZ DMA Channels
+ * Note: Channels 4...7 are not used with respect to the Acer PICA-61
+ * chipset which does not provide these DMA channels.
+ */
+#define JAZZ_SCSI_DMA 0 /* SCSI */
+#define JAZZ_FLOPPY_DMA 1 /* FLOPPY */
+#define JAZZ_AUDIOL_DMA 2 /* AUDIO L */
+#define JAZZ_AUDIOR_DMA 3 /* AUDIO R */
+
+/*
+ * JAZZ R4030 MCT_ADR chip (DMA controller)
+ * Note: Virtual Addresses !
+ */
+#define JAZZ_R4030_CONFIG 0xE0000000 /* R4030 config register */
+#define JAZZ_R4030_REVISION 0xE0000008 /* same as PICA_ASIC_REVISION */
+#define JAZZ_R4030_INV_ADDR 0xE0000010 /* Invalid Address register */
+
+#define JAZZ_R4030_TRSTBL_BASE 0xE0000018 /* Translation Table Base */
+#define JAZZ_R4030_TRSTBL_LIM 0xE0000020 /* Translation Table Limit */
+#define JAZZ_R4030_TRSTBL_INV 0xE0000028 /* Translation Table Invalidate */
+
+#define JAZZ_R4030_CACHE_MTNC 0xE0000030 /* Cache Maintenance */
+#define JAZZ_R4030_R_FAIL_ADDR 0xE0000038 /* Remote Failed Address */
+#define JAZZ_R4030_M_FAIL_ADDR 0xE0000040 /* Memory Failed Address */
+
+#define JAZZ_R4030_CACHE_PTAG 0xE0000048 /* I/O Cache Physical Tag */
+#define JAZZ_R4030_CACHE_LTAG 0xE0000050 /* I/O Cache Logical Tag */
+#define JAZZ_R4030_CACHE_BMASK 0xE0000058 /* I/O Cache Byte Mask */
+#define JAZZ_R4030_CACHE_BWIN 0xE0000060 /* I/O Cache Buffer Window */
+
+/*
+ * Remote Speed Registers.
+ *
+ * 0: free, 1: Ethernet, 2: SCSI, 3: Floppy,
+ * 4: RTC, 5: Kb./Mouse 6: serial 1, 7: serial 2,
+ * 8: parallel, 9: NVRAM, 10: CPU, 11: PROM,
+ * 12: reserved, 13: free, 14: 7seg LED, 15: ???
+ */
+#define JAZZ_R4030_REM_SPEED 0xE0000070 /* 16 Remote Speed Registers */
+ /* 0xE0000070,78,80... 0xE00000E8 */
+#define JAZZ_R4030_IRQ_ENABLE 0xE00000E8 /* Internal Interrupt Enable */
+#define JAZZ_R4030_INVAL_ADDR 0xE0000010 /* Invalid address Register */
+#define JAZZ_R4030_IRQ_SOURCE 0xE0000200 /* Interrupt Source Register */
+#define JAZZ_R4030_I386_ERROR 0xE0000208 /* i386/EISA Bus Error */
+
+/*
+ * Virtual (E)ISA controller address
+ */
+#define JAZZ_EISA_IRQ_ACK 0xE0000238 /* EISA interrupt acknowledge */
+
+/*
+ * Access the R4030 DMA and I/O Controller
+ */
+#ifndef __ASSEMBLY__
+
+static inline void r4030_delay(void)
+{
+__asm__ __volatile__(
+ ".set\tnoreorder\n\t"
+ "nop\n\t"
+ "nop\n\t"
+ "nop\n\t"
+ "nop\n\t"
+ ".set\treorder");
+}
+
+static inline unsigned short r4030_read_reg16(unsigned long addr)
+{
+ unsigned short ret = *((volatile unsigned short *)addr);
+ r4030_delay();
+ return ret;
+}
+
+static inline unsigned int r4030_read_reg32(unsigned long addr)
+{
+ unsigned int ret = *((volatile unsigned int *)addr);
+ r4030_delay();
+ return ret;
+}
+
+static inline void r4030_write_reg16(unsigned long addr, unsigned val)
+{
+ *((volatile unsigned short *)addr) = val;
+ r4030_delay();
+}
+
+static inline void r4030_write_reg32(unsigned long addr, unsigned val)
+{
+ *((volatile unsigned int *)addr) = val;
+ r4030_delay();
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#define JAZZ_FDC_BASE 0xe0003000
+#define JAZZ_RTC_BASE 0xe0004000
+#define JAZZ_PORT_BASE 0xe2000000
+
+#define JAZZ_EISA_BASE 0xe3000000
+
+#endif /* __ASM_JAZZ_H */
diff --git a/arch/mips/include/asm/jazzdma.h b/arch/mips/include/asm/jazzdma.h
new file mode 100644
index 00000000000..8bb37bba68f
--- /dev/null
+++ b/arch/mips/include/asm/jazzdma.h
@@ -0,0 +1,95 @@
+/*
+ * Helpfile for jazzdma.c -- Mips Jazz R4030 DMA controller support
+ */
+#ifndef _ASM_JAZZDMA_H
+#define _ASM_JAZZDMA_H
+
+/*
+ * Prototypes and macros
+ */
+extern unsigned long vdma_alloc(unsigned long paddr, unsigned long size);
+extern int vdma_free(unsigned long laddr);
+extern int vdma_remap(unsigned long laddr, unsigned long paddr,
+ unsigned long size);
+extern unsigned long vdma_phys2log(unsigned long paddr);
+extern unsigned long vdma_log2phys(unsigned long laddr);
+extern void vdma_stats(void); /* for debugging only */
+
+extern void vdma_enable(int channel);
+extern void vdma_disable(int channel);
+extern void vdma_set_mode(int channel, int mode);
+extern void vdma_set_addr(int channel, long addr);
+extern void vdma_set_count(int channel, int count);
+extern int vdma_get_residue(int channel);
+extern int vdma_get_enable(int channel);
+
+/*
+ * some definitions used by the driver functions
+ */
+#define VDMA_PAGESIZE 4096
+#define VDMA_PGTBL_ENTRIES 4096
+#define VDMA_PGTBL_SIZE (sizeof(VDMA_PGTBL_ENTRY) * VDMA_PGTBL_ENTRIES)
+#define VDMA_PAGE_EMPTY 0xff000000
+
+/*
+ * Macros to get page no. and offset of a given address
+ * Note that VDMA_PAGE() works for physical addresses only
+ */
+#define VDMA_PAGE(a) ((unsigned int)(a) >> 12)
+#define VDMA_OFFSET(a) ((unsigned int)(a) & (VDMA_PAGESIZE-1))
+
+/*
+ * error code returned by vdma_alloc()
+ * (See also arch/mips/kernel/jazzdma.c)
+ */
+#define VDMA_ERROR 0xffffffff
+
+/*
+ * VDMA pagetable entry description
+ */
+typedef volatile struct VDMA_PGTBL_ENTRY {
+ unsigned int frame; /* physical frame no. */
+ unsigned int owner; /* owner of this entry (0=free) */
+} VDMA_PGTBL_ENTRY;
+
+
+/*
+ * DMA channel control registers
+ * in the R4030 MCT_ADR chip
+ */
+#define JAZZ_R4030_CHNL_MODE 0xE0000100 /* 8 DMA Channel Mode Registers, */
+ /* 0xE0000100,120,140... */
+#define JAZZ_R4030_CHNL_ENABLE 0xE0000108 /* 8 DMA Channel Enable Regs, */
+ /* 0xE0000108,128,148... */
+#define JAZZ_R4030_CHNL_COUNT 0xE0000110 /* 8 DMA Channel Byte Cnt Regs, */
+ /* 0xE0000110,130,150... */
+#define JAZZ_R4030_CHNL_ADDR 0xE0000118 /* 8 DMA Channel Address Regs, */
+ /* 0xE0000118,138,158... */
+
+/* channel enable register bits */
+
+#define R4030_CHNL_ENABLE (1<<0)
+#define R4030_CHNL_WRITE (1<<1)
+#define R4030_TC_INTR (1<<8)
+#define R4030_MEM_INTR (1<<9)
+#define R4030_ADDR_INTR (1<<10)
+
+/*
+ * Channel mode register bits
+ */
+#define R4030_MODE_ATIME_40 (0) /* device access time on remote bus */
+#define R4030_MODE_ATIME_80 (1)
+#define R4030_MODE_ATIME_120 (2)
+#define R4030_MODE_ATIME_160 (3)
+#define R4030_MODE_ATIME_200 (4)
+#define R4030_MODE_ATIME_240 (5)
+#define R4030_MODE_ATIME_280 (6)
+#define R4030_MODE_ATIME_320 (7)
+#define R4030_MODE_WIDTH_8 (1<<3) /* device data bus width */
+#define R4030_MODE_WIDTH_16 (2<<3)
+#define R4030_MODE_WIDTH_32 (3<<3)
+#define R4030_MODE_INTR_EN (1<<5)
+#define R4030_MODE_BURST (1<<6) /* Rev. 2 only */
+#define R4030_MODE_FAST_ACK (1<<7) /* Rev. 2 only */
+
+#endif /* _ASM_JAZZDMA_H */
diff --git a/arch/mips/include/asm/kdebug.h b/arch/mips/include/asm/kdebug.h
new file mode 100644
index 00000000000..5bf62aafc89
--- /dev/null
+++ b/arch/mips/include/asm/kdebug.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_MIPS_KDEBUG_H
+#define _ASM_MIPS_KDEBUG_H
+
+#include <linux/notifier.h>
+
+enum die_val {
+ DIE_OOPS = 1,
+ DIE_FP,
+ DIE_TRAP,
+ DIE_RI,
+};
+
+#endif /* _ASM_MIPS_KDEBUG_H */
diff --git a/arch/mips/include/asm/kexec.h b/arch/mips/include/asm/kexec.h
new file mode 100644
index 00000000000..4314892aaeb
--- /dev/null
+++ b/arch/mips/include/asm/kexec.h
@@ -0,0 +1,30 @@
+/*
+ * kexec.h for kexec
+ * Created by <nschichan@corp.free.fr> on Thu Oct 12 14:59:34 2006
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2. See the file COPYING for more details.
+ */
+
+#ifndef _MIPS_KEXEC
+# define _MIPS_KEXEC
+
+/* Maximum physical address we can use pages from */
+#define KEXEC_SOURCE_MEMORY_LIMIT (0x20000000)
+/* Maximum address we can reach in physical address mode */
+#define KEXEC_DESTINATION_MEMORY_LIMIT (0x20000000)
+ /* Maximum address we can use for the control code buffer */
+#define KEXEC_CONTROL_MEMORY_LIMIT (0x20000000)
+
+#define KEXEC_CONTROL_PAGE_SIZE 4096
+
+/* The native architecture */
+#define KEXEC_ARCH KEXEC_ARCH_MIPS
+
+static inline void crash_setup_regs(struct pt_regs *newregs,
+ struct pt_regs *oldregs)
+{
+ /* Dummy implementation for now */
+}
+
+#endif /* !_MIPS_KEXEC */
diff --git a/arch/mips/include/asm/kgdb.h b/arch/mips/include/asm/kgdb.h
new file mode 100644
index 00000000000..48223b09396
--- /dev/null
+++ b/arch/mips/include/asm/kgdb.h
@@ -0,0 +1,44 @@
+#ifndef __ASM_KGDB_H_
+#define __ASM_KGDB_H_
+
+#ifdef __KERNEL__
+
+#include <asm/sgidefs.h>
+
+#if (_MIPS_ISA == _MIPS_ISA_MIPS1) || (_MIPS_ISA == _MIPS_ISA_MIPS2) || \
+ (_MIPS_ISA == _MIPS_ISA_MIPS32)
+
+#define KGDB_GDB_REG_SIZE 32
+
+#elif (_MIPS_ISA == _MIPS_ISA_MIPS3) || (_MIPS_ISA == _MIPS_ISA_MIPS4) || \
+ (_MIPS_ISA == _MIPS_ISA_MIPS64)
+
+#ifdef CONFIG_32BIT
+#define KGDB_GDB_REG_SIZE 32
+#else /* CONFIG_CPU_32BIT */
+#define KGDB_GDB_REG_SIZE 64
+#endif
+#else
+#error "Need to set KGDB_GDB_REG_SIZE for MIPS ISA"
+#endif /* _MIPS_ISA */
+
+#define BUFMAX 2048
+#if (KGDB_GDB_REG_SIZE == 32)
+#define NUMREGBYTES (90*sizeof(u32))
+#define NUMCRITREGBYTES (12*sizeof(u32))
+#else
+#define NUMREGBYTES (90*sizeof(u64))
+#define NUMCRITREGBYTES (12*sizeof(u64))
+#endif
+#define BREAK_INSTR_SIZE 4
+#define CACHE_FLUSH_IS_SAFE 0
+
+extern void arch_kgdb_breakpoint(void);
+extern int kgdb_early_setup;
+extern void *saved_vectors[32];
+extern void handle_exception(struct pt_regs *regs);
+extern void breakinst(void);
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_KGDB_H_ */
diff --git a/arch/mips/include/asm/kmap_types.h b/arch/mips/include/asm/kmap_types.h
new file mode 100644
index 00000000000..806aae3c533
--- /dev/null
+++ b/arch/mips/include/asm/kmap_types.h
@@ -0,0 +1,30 @@
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+
+#ifdef CONFIG_DEBUG_HIGHMEM
+# define D(n) __KM_FENCE_##n ,
+#else
+# define D(n)
+#endif
+
+enum km_type {
+D(0) KM_BOUNCE_READ,
+D(1) KM_SKB_SUNRPC_DATA,
+D(2) KM_SKB_DATA_SOFTIRQ,
+D(3) KM_USER0,
+D(4) KM_USER1,
+D(5) KM_BIO_SRC_IRQ,
+D(6) KM_BIO_DST_IRQ,
+D(7) KM_PTE0,
+D(8) KM_PTE1,
+D(9) KM_IRQ0,
+D(10) KM_IRQ1,
+D(11) KM_SOFTIRQ0,
+D(12) KM_SOFTIRQ1,
+D(13) KM_TYPE_NR
+};
+
+#undef D
+
+#endif
diff --git a/arch/mips/include/asm/kspd.h b/arch/mips/include/asm/kspd.h
new file mode 100644
index 00000000000..4e9e724c893
--- /dev/null
+++ b/arch/mips/include/asm/kspd.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+#ifndef _ASM_KSPD_H
+#define _ASM_KSPD_H
+
+struct kspd_notifications {
+ void (*kspd_sp_exit)(int sp_id);
+
+ struct list_head list;
+};
+
+#ifdef CONFIG_MIPS_APSP_KSPD
+extern void kspd_notify(struct kspd_notifications *notify);
+#else
+static inline void kspd_notify(struct kspd_notifications *notify)
+{
+}
+#endif
+
+#endif
diff --git a/arch/mips/include/asm/lasat/ds1603.h b/arch/mips/include/asm/lasat/ds1603.h
new file mode 100644
index 00000000000..edcd7544b35
--- /dev/null
+++ b/arch/mips/include/asm/lasat/ds1603.h
@@ -0,0 +1,18 @@
+#include <asm/addrspace.h>
+
+/* Lasat 100 */
+#define DS1603_REG_100 (KSEG1ADDR(0x1c810000))
+#define DS1603_RST_100 (1 << 2)
+#define DS1603_CLK_100 (1 << 0)
+#define DS1603_DATA_SHIFT_100 1
+#define DS1603_DATA_100 (1 << DS1603_DATA_SHIFT_100)
+
+/* Lasat 200 */
+#define DS1603_REG_200 (KSEG1ADDR(0x11000000))
+#define DS1603_RST_200 (1 << 3)
+#define DS1603_CLK_200 (1 << 4)
+#define DS1603_DATA_200 (1 << 5)
+
+#define DS1603_DATA_REG_200 (DS1603_REG_200 + 0x10000)
+#define DS1603_DATA_READ_SHIFT_200 9
+#define DS1603_DATA_READ_200 (1 << DS1603_DATA_READ_SHIFT_200)
diff --git a/arch/mips/include/asm/lasat/eeprom.h b/arch/mips/include/asm/lasat/eeprom.h
new file mode 100644
index 00000000000..3dac203697f
--- /dev/null
+++ b/arch/mips/include/asm/lasat/eeprom.h
@@ -0,0 +1,17 @@
+#include <asm/addrspace.h>
+
+/* lasat 100 */
+#define AT93C_REG_100 KSEG1ADDR(0x1c810000)
+#define AT93C_RDATA_REG_100 AT93C_REG_100
+#define AT93C_RDATA_SHIFT_100 4
+#define AT93C_WDATA_SHIFT_100 4
+#define AT93C_CS_M_100 (1 << 5)
+#define AT93C_CLK_M_100 (1 << 3)
+
+/* lasat 200 */
+#define AT93C_REG_200 KSEG1ADDR(0x11000000)
+#define AT93C_RDATA_REG_200 (AT93C_REG_200+0x10000)
+#define AT93C_RDATA_SHIFT_200 8
+#define AT93C_WDATA_SHIFT_200 2
+#define AT93C_CS_M_200 (1 << 0)
+#define AT93C_CLK_M_200 (1 << 1)
diff --git a/arch/mips/include/asm/lasat/head.h b/arch/mips/include/asm/lasat/head.h
new file mode 100644
index 00000000000..f5589f31a19
--- /dev/null
+++ b/arch/mips/include/asm/lasat/head.h
@@ -0,0 +1,22 @@
+/*
+ * Image header stuff
+ */
+#ifndef _HEAD_H
+#define _HEAD_H
+
+#define LASAT_K_MAGIC0_VAL 0xfedeabba
+#define LASAT_K_MAGIC1_VAL 0x00bedead
+
+#ifndef _LANGUAGE_ASSEMBLY
+#include <linux/types.h>
+struct bootloader_header {
+ u32 magic[2];
+ u32 version;
+ u32 image_start;
+ u32 image_size;
+ u32 kernel_start;
+ u32 kernel_entry;
+};
+#endif
+
+#endif /* _HEAD_H */
diff --git a/arch/mips/include/asm/lasat/lasat.h b/arch/mips/include/asm/lasat/lasat.h
new file mode 100644
index 00000000000..caeba1e302a
--- /dev/null
+++ b/arch/mips/include/asm/lasat/lasat.h
@@ -0,0 +1,258 @@
+/*
+ * lasat.h
+ *
+ * Thomas Horsten <thh@lasat.com>
+ * Copyright (C) 2000 LASAT Networks A/S.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Configuration for LASAT boards, loads the appropriate include files.
+ */
+#ifndef _LASAT_H
+#define _LASAT_H
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+extern struct lasat_misc {
+ volatile u32 *reset_reg;
+ volatile u32 *flash_wp_reg;
+ u32 flash_wp_bit;
+} *lasat_misc;
+
+enum lasat_mtdparts {
+ LASAT_MTD_BOOTLOADER,
+ LASAT_MTD_SERVICE,
+ LASAT_MTD_NORMAL,
+ LASAT_MTD_CONFIG,
+ LASAT_MTD_FS,
+ LASAT_MTD_LAST
+};
+
+/*
+ * The format of the data record in the EEPROM.
+ * See Documentation/LASAT/eeprom.txt for a detailed description
+ * of the fields in this struct, and the LASAT Hardware Configuration
+ * field specification for a detailed description of the config
+ * field.
+ */
+#include <linux/types.h>
+
+#define LASAT_EEPROM_VERSION 7
+struct lasat_eeprom_struct {
+ unsigned int version;
+ unsigned int cfg[3];
+ unsigned char hwaddr[6];
+ unsigned char print_partno[12];
+ unsigned char term0;
+ unsigned char print_serial[14];
+ unsigned char term1;
+ unsigned char prod_partno[12];
+ unsigned char term2;
+ unsigned char prod_serial[14];
+ unsigned char term3;
+ unsigned char passwd_hash[16];
+ unsigned char pwdnull;
+ unsigned char vendid;
+ unsigned char ts_ref;
+ unsigned char ts_signoff;
+ unsigned char reserved[11];
+ unsigned char debugaccess;
+ unsigned short prid;
+ unsigned int serviceflag;
+ unsigned int ipaddr;
+ unsigned int netmask;
+ unsigned int crc32;
+};
+
+struct lasat_eeprom_struct_pre7 {
+ unsigned int version;
+ unsigned int flags[3];
+ unsigned char hwaddr0[6];
+ unsigned char hwaddr1[6];
+ unsigned char print_partno[9];
+ unsigned char term0;
+ unsigned char print_serial[14];
+ unsigned char term1;
+ unsigned char prod_partno[9];
+ unsigned char term2;
+ unsigned char prod_serial[14];
+ unsigned char term3;
+ unsigned char passwd_hash[24];
+ unsigned char pwdnull;
+ unsigned char vendor;
+ unsigned char ts_ref;
+ unsigned char ts_signoff;
+ unsigned char reserved[6];
+ unsigned int writecount;
+ unsigned int ipaddr;
+ unsigned int netmask;
+ unsigned int crc32;
+};
+
+/* Configuration descriptor encoding - see the doc for details */
+
+#define LASAT_W0_DSCTYPE(v) (((v)) & 0xf)
+#define LASAT_W0_BMID(v) (((v) >> 0x04) & 0xf)
+#define LASAT_W0_CPUTYPE(v) (((v) >> 0x08) & 0xf)
+#define LASAT_W0_BUSSPEED(v) (((v) >> 0x0c) & 0xf)
+#define LASAT_W0_CPUCLK(v) (((v) >> 0x10) & 0xf)
+#define LASAT_W0_SDRAMBANKSZ(v) (((v) >> 0x14) & 0xf)
+#define LASAT_W0_SDRAMBANKS(v) (((v) >> 0x18) & 0xf)
+#define LASAT_W0_L2CACHE(v) (((v) >> 0x1c) & 0xf)
+
+#define LASAT_W1_EDHAC(v) (((v)) & 0xf)
+#define LASAT_W1_HIFN(v) (((v) >> 0x04) & 0x1)
+#define LASAT_W1_ISDN(v) (((v) >> 0x05) & 0x1)
+#define LASAT_W1_IDE(v) (((v) >> 0x06) & 0x1)
+#define LASAT_W1_HDLC(v) (((v) >> 0x07) & 0x1)
+#define LASAT_W1_USVERSION(v) (((v) >> 0x08) & 0x1)
+#define LASAT_W1_4MACS(v) (((v) >> 0x09) & 0x1)
+#define LASAT_W1_EXTSERIAL(v) (((v) >> 0x0a) & 0x1)
+#define LASAT_W1_FLASHSIZE(v) (((v) >> 0x0c) & 0xf)
+#define LASAT_W1_PCISLOTS(v) (((v) >> 0x10) & 0xf)
+#define LASAT_W1_PCI1OPT(v) (((v) >> 0x14) & 0xf)
+#define LASAT_W1_PCI2OPT(v) (((v) >> 0x18) & 0xf)
+#define LASAT_W1_PCI3OPT(v) (((v) >> 0x1c) & 0xf)
+
+/* Routines specific to LASAT boards */
+
+#define LASAT_BMID_MASQUERADE2 0
+#define LASAT_BMID_MASQUERADEPRO 1
+#define LASAT_BMID_SAFEPIPE25 2
+#define LASAT_BMID_SAFEPIPE50 3
+#define LASAT_BMID_SAFEPIPE100 4
+#define LASAT_BMID_SAFEPIPE5000 5
+#define LASAT_BMID_SAFEPIPE7000 6
+#define LASAT_BMID_SAFEPIPE1000 7
+#if 0
+#define LASAT_BMID_SAFEPIPE30 7
+#define LASAT_BMID_SAFEPIPE5100 8
+#define LASAT_BMID_SAFEPIPE7100 9
+#endif
+#define LASAT_BMID_UNKNOWN 0xf
+#define LASAT_MAX_BMID_NAMES 9 /* no larger than 15! */
+
+#define LASAT_HAS_EDHAC (1 << 0)
+#define LASAT_EDHAC_FAST (1 << 1)
+#define LASAT_HAS_EADI (1 << 2)
+#define LASAT_HAS_HIFN (1 << 3)
+#define LASAT_HAS_ISDN (1 << 4)
+#define LASAT_HAS_LEASEDLINE_IF (1 << 5)
+#define LASAT_HAS_HDC (1 << 6)
+
+#define LASAT_PRID_MASQUERADE2 0
+#define LASAT_PRID_MASQUERADEPRO 1
+#define LASAT_PRID_SAFEPIPE25 2
+#define LASAT_PRID_SAFEPIPE50 3
+#define LASAT_PRID_SAFEPIPE100 4
+#define LASAT_PRID_SAFEPIPE5000 5
+#define LASAT_PRID_SAFEPIPE7000 6
+#define LASAT_PRID_SAFEPIPE30 7
+#define LASAT_PRID_SAFEPIPE5100 8
+#define LASAT_PRID_SAFEPIPE7100 9
+
+#define LASAT_PRID_SAFEPIPE1110 10
+#define LASAT_PRID_SAFEPIPE3020 11
+#define LASAT_PRID_SAFEPIPE3030 12
+#define LASAT_PRID_SAFEPIPE5020 13
+#define LASAT_PRID_SAFEPIPE5030 14
+#define LASAT_PRID_SAFEPIPE1120 15
+#define LASAT_PRID_SAFEPIPE1130 16
+#define LASAT_PRID_SAFEPIPE6010 17
+#define LASAT_PRID_SAFEPIPE6110 18
+#define LASAT_PRID_SAFEPIPE6210 19
+#define LASAT_PRID_SAFEPIPE1020 20
+#define LASAT_PRID_SAFEPIPE1040 21
+#define LASAT_PRID_SAFEPIPE1060 22
+
+struct lasat_info {
+ unsigned int li_cpu_hz;
+ unsigned int li_bus_hz;
+ unsigned int li_bmid;
+ unsigned int li_memsize;
+ unsigned int li_flash_size;
+ unsigned int li_prid;
+ unsigned char li_bmstr[16];
+ unsigned char li_namestr[32];
+ unsigned char li_typestr[16];
+ /* Info on the Flash layout */
+ unsigned int li_flash_base;
+ unsigned long li_flashpart_base[LASAT_MTD_LAST];
+ unsigned long li_flashpart_size[LASAT_MTD_LAST];
+ struct lasat_eeprom_struct li_eeprom_info;
+ unsigned int li_eeprom_upgrade_version;
+ unsigned int li_debugaccess;
+};
+
+extern struct lasat_info lasat_board_info;
+
+static inline unsigned long lasat_flash_partition_start(int partno)
+{
+ if (partno < 0 || partno >= LASAT_MTD_LAST)
+ return 0;
+
+ return lasat_board_info.li_flashpart_base[partno];
+}
+
+static inline unsigned long lasat_flash_partition_size(int partno)
+{
+ if (partno < 0 || partno >= LASAT_MTD_LAST)
+ return 0;
+
+ return lasat_board_info.li_flashpart_size[partno];
+}
+
+/* Called from setup() to initialize the global board_info struct */
+extern int lasat_init_board_info(void);
+
+/* Write the modified EEPROM info struct */
+extern void lasat_write_eeprom_info(void);
+
+#define N_MACHTYPES 2
+/* for calibration of delays */
+
+/* the lasat_ndelay function is necessary because it is used at an
+ * early stage of the boot process where ndelay is not calibrated.
+ * It is used for the bit-banging rtc and eeprom drivers */
+
+#include <linux/delay.h>
+
+/* calculating with the slowest board with 100 MHz clock */
+#define LASAT_100_DIVIDER 20
+/* All 200's run at 250 MHz clock */
+#define LASAT_200_DIVIDER 8
+
+extern unsigned int lasat_ndelay_divider;
+
+static inline void lasat_ndelay(unsigned int ns)
+{
+ __delay(ns / lasat_ndelay_divider);
+}
+
+#define IS_LASAT_200() (current_cpu_data.cputype == CPU_R5000)
+
+#endif /* !defined (_LANGUAGE_ASSEMBLY) */
+
+#define LASAT_SERVICEMODE_MAGIC_1 0xdeadbeef
+#define LASAT_SERVICEMODE_MAGIC_2 0xfedeabba
+
+/* Lasat 100 boards */
+#define LASAT_GT_BASE (KSEG1ADDR(0x14000000))
+
+/* Lasat 200 boards */
+#define Vrc5074_PHYS_BASE 0x1fa00000
+#define Vrc5074_BASE (KSEG1ADDR(Vrc5074_PHYS_BASE))
+#define PCI_WINDOW1 0x1a000000
+
+#endif /* _LASAT_H */
diff --git a/arch/mips/include/asm/lasat/lasatint.h b/arch/mips/include/asm/lasat/lasatint.h
new file mode 100644
index 00000000000..e0d2458b43d
--- /dev/null
+++ b/arch/mips/include/asm/lasat/lasatint.h
@@ -0,0 +1,14 @@
+#ifndef __ASM_LASAT_LASATINT_H
+#define __ASM_LASAT_LASATINT_H
+
+/* lasat 100 */
+#define LASAT_INT_STATUS_REG_100 (KSEG1ADDR(0x1c880000))
+#define LASAT_INT_MASK_REG_100 (KSEG1ADDR(0x1c890000))
+#define LASATINT_MASK_SHIFT_100 0
+
+/* lasat 200 */
+#define LASAT_INT_STATUS_REG_200 (KSEG1ADDR(0x1104003c))
+#define LASAT_INT_MASK_REG_200 (KSEG1ADDR(0x1104003c))
+#define LASATINT_MASK_SHIFT_200 16
+
+#endif /* __ASM_LASAT_LASATINT_H */
diff --git a/arch/mips/include/asm/lasat/picvue.h b/arch/mips/include/asm/lasat/picvue.h
new file mode 100644
index 00000000000..42a492edc40
--- /dev/null
+++ b/arch/mips/include/asm/lasat/picvue.h
@@ -0,0 +1,15 @@
+/* Lasat 100 */
+#define PVC_REG_100 KSEG1ADDR(0x1c820000)
+#define PVC_DATA_SHIFT_100 0
+#define PVC_DATA_M_100 0xFF
+#define PVC_E_100 (1 << 8)
+#define PVC_RW_100 (1 << 9)
+#define PVC_RS_100 (1 << 10)
+
+/* Lasat 200 */
+#define PVC_REG_200 KSEG1ADDR(0x11000000)
+#define PVC_DATA_SHIFT_200 24
+#define PVC_DATA_M_200 (0xFF << PVC_DATA_SHIFT_200)
+#define PVC_E_200 (1 << 16)
+#define PVC_RW_200 (1 << 17)
+#define PVC_RS_200 (1 << 18)
diff --git a/arch/mips/include/asm/lasat/serial.h b/arch/mips/include/asm/lasat/serial.h
new file mode 100644
index 00000000000..1c37d70579b
--- /dev/null
+++ b/arch/mips/include/asm/lasat/serial.h
@@ -0,0 +1,13 @@
+#include <asm/lasat/lasat.h>
+
+/* Lasat 100 boards serial configuration */
+#define LASAT_BASE_BAUD_100 (7372800 / 16)
+#define LASAT_UART_REGS_BASE_100 0x1c8b0000
+#define LASAT_UART_REGS_SHIFT_100 2
+#define LASATINT_UART_100 16
+
+/* * LASAT 200 boards serial configuration */
+#define LASAT_BASE_BAUD_200 (100000000 / 16 / 12)
+#define LASAT_UART_REGS_BASE_200 (Vrc5074_PHYS_BASE + 0x0300)
+#define LASAT_UART_REGS_SHIFT_200 3
+#define LASATINT_UART_200 21
diff --git a/arch/mips/include/asm/linkage.h b/arch/mips/include/asm/linkage.h
new file mode 100644
index 00000000000..e9a940d1b0c
--- /dev/null
+++ b/arch/mips/include/asm/linkage.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#ifdef __ASSEMBLY__
+#include <asm/asm.h>
+#endif
+
+#define __weak __attribute__((weak))
+
+#endif
diff --git a/arch/mips/include/asm/local.h b/arch/mips/include/asm/local.h
new file mode 100644
index 00000000000..f96fd59e084
--- /dev/null
+++ b/arch/mips/include/asm/local.h
@@ -0,0 +1,221 @@
+#ifndef _ARCH_MIPS_LOCAL_H
+#define _ARCH_MIPS_LOCAL_H
+
+#include <linux/percpu.h>
+#include <linux/bitops.h>
+#include <asm/atomic.h>
+#include <asm/cmpxchg.h>
+#include <asm/war.h>
+
+typedef struct
+{
+ atomic_long_t a;
+} local_t;
+
+#define LOCAL_INIT(i) { ATOMIC_LONG_INIT(i) }
+
+#define local_read(l) atomic_long_read(&(l)->a)
+#define local_set(l, i) atomic_long_set(&(l)->a, (i))
+
+#define local_add(i, l) atomic_long_add((i), (&(l)->a))
+#define local_sub(i, l) atomic_long_sub((i), (&(l)->a))
+#define local_inc(l) atomic_long_inc(&(l)->a)
+#define local_dec(l) atomic_long_dec(&(l)->a)
+
+/*
+ * Same as above, but return the result value
+ */
+static __inline__ long local_add_return(long i, local_t * l)
+{
+ unsigned long result;
+
+ if (cpu_has_llsc && R10000_LLSC_WAR) {
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1:" __LL "%1, %2 # local_add_return \n"
+ " addu %0, %1, %3 \n"
+ __SC "%0, %2 \n"
+ " beqzl %0, 1b \n"
+ " addu %0, %1, %3 \n"
+ " .set mips0 \n"
+ : "=&r" (result), "=&r" (temp), "=m" (l->a.counter)
+ : "Ir" (i), "m" (l->a.counter)
+ : "memory");
+ } else if (cpu_has_llsc) {
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1:" __LL "%1, %2 # local_add_return \n"
+ " addu %0, %1, %3 \n"
+ __SC "%0, %2 \n"
+ " beqz %0, 1b \n"
+ " addu %0, %1, %3 \n"
+ " .set mips0 \n"
+ : "=&r" (result), "=&r" (temp), "=m" (l->a.counter)
+ : "Ir" (i), "m" (l->a.counter)
+ : "memory");
+ } else {
+ unsigned long flags;
+
+ local_irq_save(flags);
+ result = l->a.counter;
+ result += i;
+ l->a.counter = result;
+ local_irq_restore(flags);
+ }
+
+ return result;
+}
+
+static __inline__ long local_sub_return(long i, local_t * l)
+{
+ unsigned long result;
+
+ if (cpu_has_llsc && R10000_LLSC_WAR) {
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1:" __LL "%1, %2 # local_sub_return \n"
+ " subu %0, %1, %3 \n"
+ __SC "%0, %2 \n"
+ " beqzl %0, 1b \n"
+ " subu %0, %1, %3 \n"
+ " .set mips0 \n"
+ : "=&r" (result), "=&r" (temp), "=m" (l->a.counter)
+ : "Ir" (i), "m" (l->a.counter)
+ : "memory");
+ } else if (cpu_has_llsc) {
+ unsigned long temp;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1:" __LL "%1, %2 # local_sub_return \n"
+ " subu %0, %1, %3 \n"
+ __SC "%0, %2 \n"
+ " beqz %0, 1b \n"
+ " subu %0, %1, %3 \n"
+ " .set mips0 \n"
+ : "=&r" (result), "=&r" (temp), "=m" (l->a.counter)
+ : "Ir" (i), "m" (l->a.counter)
+ : "memory");
+ } else {
+ unsigned long flags;
+
+ local_irq_save(flags);
+ result = l->a.counter;
+ result -= i;
+ l->a.counter = result;
+ local_irq_restore(flags);
+ }
+
+ return result;
+}
+
+#define local_cmpxchg(l, o, n) \
+ ((long)cmpxchg_local(&((l)->a.counter), (o), (n)))
+#define local_xchg(l, n) (xchg_local(&((l)->a.counter), (n)))
+
+/**
+ * local_add_unless - add unless the number is a given value
+ * @l: pointer of type local_t
+ * @a: the amount to add to l...
+ * @u: ...unless l is equal to u.
+ *
+ * Atomically adds @a to @l, so long as it was not @u.
+ * Returns non-zero if @l was not @u, and zero otherwise.
+ */
+#define local_add_unless(l, a, u) \
+({ \
+ long c, old; \
+ c = local_read(l); \
+ while (c != (u) && (old = local_cmpxchg((l), c, c + (a))) != c) \
+ c = old; \
+ c != (u); \
+})
+#define local_inc_not_zero(l) local_add_unless((l), 1, 0)
+
+#define local_dec_return(l) local_sub_return(1, (l))
+#define local_inc_return(l) local_add_return(1, (l))
+
+/*
+ * local_sub_and_test - subtract value from variable and test result
+ * @i: integer value to subtract
+ * @l: pointer of type local_t
+ *
+ * Atomically subtracts @i from @l and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+#define local_sub_and_test(i, l) (local_sub_return((i), (l)) == 0)
+
+/*
+ * local_inc_and_test - increment and test
+ * @l: pointer of type local_t
+ *
+ * Atomically increments @l by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define local_inc_and_test(l) (local_inc_return(l) == 0)
+
+/*
+ * local_dec_and_test - decrement by 1 and test
+ * @l: pointer of type local_t
+ *
+ * Atomically decrements @l by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+#define local_dec_and_test(l) (local_sub_return(1, (l)) == 0)
+
+/*
+ * local_add_negative - add and test if negative
+ * @l: pointer of type local_t
+ * @i: integer value to add
+ *
+ * Atomically adds @i to @l and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+#define local_add_negative(i, l) (local_add_return(i, (l)) < 0)
+
+/* Use these for per-cpu local_t variables: on some archs they are
+ * much more efficient than these naive implementations. Note they take
+ * a variable, not an address.
+ */
+
+#define __local_inc(l) ((l)->a.counter++)
+#define __local_dec(l) ((l)->a.counter++)
+#define __local_add(i, l) ((l)->a.counter+=(i))
+#define __local_sub(i, l) ((l)->a.counter-=(i))
+
+/* Need to disable preemption for the cpu local counters otherwise we could
+ still access a variable of a previous CPU in a non atomic way. */
+#define cpu_local_wrap_v(l) \
+ ({ local_t res__; \
+ preempt_disable(); \
+ res__ = (l); \
+ preempt_enable(); \
+ res__; })
+#define cpu_local_wrap(l) \
+ ({ preempt_disable(); \
+ l; \
+ preempt_enable(); }) \
+
+#define cpu_local_read(l) cpu_local_wrap_v(local_read(&__get_cpu_var(l)))
+#define cpu_local_set(l, i) cpu_local_wrap(local_set(&__get_cpu_var(l), (i)))
+#define cpu_local_inc(l) cpu_local_wrap(local_inc(&__get_cpu_var(l)))
+#define cpu_local_dec(l) cpu_local_wrap(local_dec(&__get_cpu_var(l)))
+#define cpu_local_add(i, l) cpu_local_wrap(local_add((i), &__get_cpu_var(l)))
+#define cpu_local_sub(i, l) cpu_local_wrap(local_sub((i), &__get_cpu_var(l)))
+
+#define __cpu_local_inc(l) cpu_local_inc(l)
+#define __cpu_local_dec(l) cpu_local_dec(l)
+#define __cpu_local_add(i, l) cpu_local_add((i), (l))
+#define __cpu_local_sub(i, l) cpu_local_sub((i), (l))
+
+#endif /* _ARCH_MIPS_LOCAL_H */
diff --git a/arch/mips/include/asm/m48t35.h b/arch/mips/include/asm/m48t35.h
new file mode 100644
index 00000000000..f44852e9a96
--- /dev/null
+++ b/arch/mips/include/asm/m48t35.h
@@ -0,0 +1,27 @@
+/*
+ * Registers for the SGS-Thomson M48T35 Timekeeper RAM chip
+ */
+#ifndef _ASM_M48T35_H
+#define _ASM_M48T35_H
+
+#include <linux/spinlock.h>
+
+extern spinlock_t rtc_lock;
+
+struct m48t35_rtc {
+ volatile u8 pad[0x7ff8]; /* starts at 0x7ff8 */
+ volatile u8 control;
+ volatile u8 sec;
+ volatile u8 min;
+ volatile u8 hour;
+ volatile u8 day;
+ volatile u8 date;
+ volatile u8 month;
+ volatile u8 year;
+};
+
+#define M48T35_RTC_SET 0x80
+#define M48T35_RTC_STOPPED 0x80
+#define M48T35_RTC_READ 0x40
+
+#endif /* _ASM_M48T35_H */
diff --git a/arch/mips/include/asm/m48t37.h b/arch/mips/include/asm/m48t37.h
new file mode 100644
index 00000000000..cabf86264f3
--- /dev/null
+++ b/arch/mips/include/asm/m48t37.h
@@ -0,0 +1,35 @@
+/*
+ * Registers for the SGS-Thomson M48T37 Timekeeper RAM chip
+ */
+#ifndef _ASM_M48T37_H
+#define _ASM_M48T37_H
+
+#include <linux/spinlock.h>
+
+extern spinlock_t rtc_lock;
+
+struct m48t37_rtc {
+ volatile u8 pad[0x7ff0]; /* NVRAM */
+ volatile u8 flags;
+ volatile u8 century;
+ volatile u8 alarm_sec;
+ volatile u8 alarm_min;
+ volatile u8 alarm_hour;
+ volatile u8 alarm_data;
+ volatile u8 interrupts;
+ volatile u8 watchdog;
+ volatile u8 control;
+ volatile u8 sec;
+ volatile u8 min;
+ volatile u8 hour;
+ volatile u8 day;
+ volatile u8 date;
+ volatile u8 month;
+ volatile u8 year;
+};
+
+#define M48T37_RTC_SET 0x80
+#define M48T37_RTC_STOPPED 0x80
+#define M48T37_RTC_READ 0x40
+
+#endif /* _ASM_M48T37_H */
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
new file mode 100644
index 00000000000..0d302bad449
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -0,0 +1,1772 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * Include file for Alchemy Semiconductor's Au1k CPU.
+ *
+ * Copyright 2000-2001, 2006-2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+ /*
+ * some definitions add by takuzo@sm.sony.co.jp and sato@sm.sony.co.jp
+ */
+
+#ifndef _AU1000_H_
+#define _AU1000_H_
+
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+#include <linux/delay.h>
+#include <linux/types.h>
+
+#include <linux/io.h>
+#include <linux/irq.h>
+
+/* cpu pipeline flush */
+void static inline au_sync(void)
+{
+ __asm__ volatile ("sync");
+}
+
+void static inline au_sync_udelay(int us)
+{
+ __asm__ volatile ("sync");
+ udelay(us);
+}
+
+void static inline au_sync_delay(int ms)
+{
+ __asm__ volatile ("sync");
+ mdelay(ms);
+}
+
+void static inline au_writeb(u8 val, unsigned long reg)
+{
+ *(volatile u8 *)reg = val;
+}
+
+void static inline au_writew(u16 val, unsigned long reg)
+{
+ *(volatile u16 *)reg = val;
+}
+
+void static inline au_writel(u32 val, unsigned long reg)
+{
+ *(volatile u32 *)reg = val;
+}
+
+static inline u8 au_readb(unsigned long reg)
+{
+ return *(volatile u8 *)reg;
+}
+
+static inline u16 au_readw(unsigned long reg)
+{
+ return *(volatile u16 *)reg;
+}
+
+static inline u32 au_readl(unsigned long reg)
+{
+ return *(volatile u32 *)reg;
+}
+
+
+/* arch/mips/au1000/common/clocks.c */
+extern void set_au1x00_speed(unsigned int new_freq);
+extern unsigned int get_au1x00_speed(void);
+extern void set_au1x00_uart_baud_base(unsigned long new_baud_base);
+extern unsigned long get_au1x00_uart_baud_base(void);
+extern void set_au1x00_lcd_clock(void);
+extern unsigned int get_au1x00_lcd_clock(void);
+
+/*
+ * Every board describes its IRQ mapping with this table.
+ */
+struct au1xxx_irqmap {
+ int im_irq;
+ int im_type;
+ int im_request;
+};
+
+/*
+ * init_IRQ looks for a table with this name.
+ */
+extern struct au1xxx_irqmap au1xxx_irq_map[];
+
+#endif /* !defined (_LANGUAGE_ASSEMBLY) */
+
+/*
+ * SDRAM register offsets
+ */
+#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || \
+ defined(CONFIG_SOC_AU1100)
+#define MEM_SDMODE0 0x0000
+#define MEM_SDMODE1 0x0004
+#define MEM_SDMODE2 0x0008
+#define MEM_SDADDR0 0x000C
+#define MEM_SDADDR1 0x0010
+#define MEM_SDADDR2 0x0014
+#define MEM_SDREFCFG 0x0018
+#define MEM_SDPRECMD 0x001C
+#define MEM_SDAUTOREF 0x0020
+#define MEM_SDWRMD0 0x0024
+#define MEM_SDWRMD1 0x0028
+#define MEM_SDWRMD2 0x002C
+#define MEM_SDSLEEP 0x0030
+#define MEM_SDSMCKE 0x0034
+
+/*
+ * MEM_SDMODE register content definitions
+ */
+#define MEM_SDMODE_F (1 << 22)
+#define MEM_SDMODE_SR (1 << 21)
+#define MEM_SDMODE_BS (1 << 20)
+#define MEM_SDMODE_RS (3 << 18)
+#define MEM_SDMODE_CS (7 << 15)
+#define MEM_SDMODE_TRAS (15 << 11)
+#define MEM_SDMODE_TMRD (3 << 9)
+#define MEM_SDMODE_TWR (3 << 7)
+#define MEM_SDMODE_TRP (3 << 5)
+#define MEM_SDMODE_TRCD (3 << 3)
+#define MEM_SDMODE_TCL (7 << 0)
+
+#define MEM_SDMODE_BS_2Bank (0 << 20)
+#define MEM_SDMODE_BS_4Bank (1 << 20)
+#define MEM_SDMODE_RS_11Row (0 << 18)
+#define MEM_SDMODE_RS_12Row (1 << 18)
+#define MEM_SDMODE_RS_13Row (2 << 18)
+#define MEM_SDMODE_RS_N(N) ((N) << 18)
+#define MEM_SDMODE_CS_7Col (0 << 15)
+#define MEM_SDMODE_CS_8Col (1 << 15)
+#define MEM_SDMODE_CS_9Col (2 << 15)
+#define MEM_SDMODE_CS_10Col (3 << 15)
+#define MEM_SDMODE_CS_11Col (4 << 15)
+#define MEM_SDMODE_CS_N(N) ((N) << 15)
+#define MEM_SDMODE_TRAS_N(N) ((N) << 11)
+#define MEM_SDMODE_TMRD_N(N) ((N) << 9)
+#define MEM_SDMODE_TWR_N(N) ((N) << 7)
+#define MEM_SDMODE_TRP_N(N) ((N) << 5)
+#define MEM_SDMODE_TRCD_N(N) ((N) << 3)
+#define MEM_SDMODE_TCL_N(N) ((N) << 0)
+
+/*
+ * MEM_SDADDR register contents definitions
+ */
+#define MEM_SDADDR_E (1 << 20)
+#define MEM_SDADDR_CSBA (0x03FF << 10)
+#define MEM_SDADDR_CSMASK (0x03FF << 0)
+#define MEM_SDADDR_CSBA_N(N) ((N) & (0x03FF << 22) >> 12)
+#define MEM_SDADDR_CSMASK_N(N) ((N)&(0x03FF << 22) >> 22)
+
+/*
+ * MEM_SDREFCFG register content definitions
+ */
+#define MEM_SDREFCFG_TRC (15 << 28)
+#define MEM_SDREFCFG_TRPM (3 << 26)
+#define MEM_SDREFCFG_E (1 << 25)
+#define MEM_SDREFCFG_RE (0x1ffffff << 0)
+#define MEM_SDREFCFG_TRC_N(N) ((N) << MEM_SDREFCFG_TRC)
+#define MEM_SDREFCFG_TRPM_N(N) ((N) << MEM_SDREFCFG_TRPM)
+#define MEM_SDREFCFG_REF_N(N) (N)
+#endif
+
+/***********************************************************************/
+
+/*
+ * Au1550 SDRAM Register Offsets
+ */
+
+/***********************************************************************/
+
+#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
+#define MEM_SDMODE0 0x0800
+#define MEM_SDMODE1 0x0808
+#define MEM_SDMODE2 0x0810
+#define MEM_SDADDR0 0x0820
+#define MEM_SDADDR1 0x0828
+#define MEM_SDADDR2 0x0830
+#define MEM_SDCONFIGA 0x0840
+#define MEM_SDCONFIGB 0x0848
+#define MEM_SDSTAT 0x0850
+#define MEM_SDERRADDR 0x0858
+#define MEM_SDSTRIDE0 0x0860
+#define MEM_SDSTRIDE1 0x0868
+#define MEM_SDSTRIDE2 0x0870
+#define MEM_SDWRMD0 0x0880
+#define MEM_SDWRMD1 0x0888
+#define MEM_SDWRMD2 0x0890
+#define MEM_SDPRECMD 0x08C0
+#define MEM_SDAUTOREF 0x08C8
+#define MEM_SDSREF 0x08D0
+#define MEM_SDSLEEP MEM_SDSREF
+
+#endif
+
+/*
+ * Physical base addresses for integrated peripherals
+ */
+
+#ifdef CONFIG_SOC_AU1000
+#define MEM_PHYS_ADDR 0x14000000
+#define STATIC_MEM_PHYS_ADDR 0x14001000
+#define DMA0_PHYS_ADDR 0x14002000
+#define DMA1_PHYS_ADDR 0x14002100
+#define DMA2_PHYS_ADDR 0x14002200
+#define DMA3_PHYS_ADDR 0x14002300
+#define DMA4_PHYS_ADDR 0x14002400
+#define DMA5_PHYS_ADDR 0x14002500
+#define DMA6_PHYS_ADDR 0x14002600
+#define DMA7_PHYS_ADDR 0x14002700
+#define IC0_PHYS_ADDR 0x10400000
+#define IC1_PHYS_ADDR 0x11800000
+#define AC97_PHYS_ADDR 0x10000000
+#define USBH_PHYS_ADDR 0x10100000
+#define USBD_PHYS_ADDR 0x10200000
+#define IRDA_PHYS_ADDR 0x10300000
+#define MAC0_PHYS_ADDR 0x10500000
+#define MAC1_PHYS_ADDR 0x10510000
+#define MACEN_PHYS_ADDR 0x10520000
+#define MACDMA0_PHYS_ADDR 0x14004000
+#define MACDMA1_PHYS_ADDR 0x14004200
+#define I2S_PHYS_ADDR 0x11000000
+#define UART0_PHYS_ADDR 0x11100000
+#define UART1_PHYS_ADDR 0x11200000
+#define UART2_PHYS_ADDR 0x11300000
+#define UART3_PHYS_ADDR 0x11400000
+#define SSI0_PHYS_ADDR 0x11600000
+#define SSI1_PHYS_ADDR 0x11680000
+#define SYS_PHYS_ADDR 0x11900000
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
+#endif
+
+/********************************************************************/
+
+#ifdef CONFIG_SOC_AU1500
+#define MEM_PHYS_ADDR 0x14000000
+#define STATIC_MEM_PHYS_ADDR 0x14001000
+#define DMA0_PHYS_ADDR 0x14002000
+#define DMA1_PHYS_ADDR 0x14002100
+#define DMA2_PHYS_ADDR 0x14002200
+#define DMA3_PHYS_ADDR 0x14002300
+#define DMA4_PHYS_ADDR 0x14002400
+#define DMA5_PHYS_ADDR 0x14002500
+#define DMA6_PHYS_ADDR 0x14002600
+#define DMA7_PHYS_ADDR 0x14002700
+#define IC0_PHYS_ADDR 0x10400000
+#define IC1_PHYS_ADDR 0x11800000
+#define AC97_PHYS_ADDR 0x10000000
+#define USBH_PHYS_ADDR 0x10100000
+#define USBD_PHYS_ADDR 0x10200000
+#define PCI_PHYS_ADDR 0x14005000
+#define MAC0_PHYS_ADDR 0x11500000
+#define MAC1_PHYS_ADDR 0x11510000
+#define MACEN_PHYS_ADDR 0x11520000
+#define MACDMA0_PHYS_ADDR 0x14004000
+#define MACDMA1_PHYS_ADDR 0x14004200
+#define I2S_PHYS_ADDR 0x11000000
+#define UART0_PHYS_ADDR 0x11100000
+#define UART3_PHYS_ADDR 0x11400000
+#define GPIO2_PHYS_ADDR 0x11700000
+#define SYS_PHYS_ADDR 0x11900000
+#define PCI_MEM_PHYS_ADDR 0x400000000ULL
+#define PCI_IO_PHYS_ADDR 0x500000000ULL
+#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL
+#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
+#endif
+
+/********************************************************************/
+
+#ifdef CONFIG_SOC_AU1100
+#define MEM_PHYS_ADDR 0x14000000
+#define STATIC_MEM_PHYS_ADDR 0x14001000
+#define DMA0_PHYS_ADDR 0x14002000
+#define DMA1_PHYS_ADDR 0x14002100
+#define DMA2_PHYS_ADDR 0x14002200
+#define DMA3_PHYS_ADDR 0x14002300
+#define DMA4_PHYS_ADDR 0x14002400
+#define DMA5_PHYS_ADDR 0x14002500
+#define DMA6_PHYS_ADDR 0x14002600
+#define DMA7_PHYS_ADDR 0x14002700
+#define IC0_PHYS_ADDR 0x10400000
+#define SD0_PHYS_ADDR 0x10600000
+#define SD1_PHYS_ADDR 0x10680000
+#define IC1_PHYS_ADDR 0x11800000
+#define AC97_PHYS_ADDR 0x10000000
+#define USBH_PHYS_ADDR 0x10100000
+#define USBD_PHYS_ADDR 0x10200000
+#define IRDA_PHYS_ADDR 0x10300000
+#define MAC0_PHYS_ADDR 0x10500000
+#define MACEN_PHYS_ADDR 0x10520000
+#define MACDMA0_PHYS_ADDR 0x14004000
+#define MACDMA1_PHYS_ADDR 0x14004200
+#define I2S_PHYS_ADDR 0x11000000
+#define UART0_PHYS_ADDR 0x11100000
+#define UART1_PHYS_ADDR 0x11200000
+#define UART3_PHYS_ADDR 0x11400000
+#define SSI0_PHYS_ADDR 0x11600000
+#define SSI1_PHYS_ADDR 0x11680000
+#define GPIO2_PHYS_ADDR 0x11700000
+#define SYS_PHYS_ADDR 0x11900000
+#define LCD_PHYS_ADDR 0x15000000
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
+#endif
+
+/***********************************************************************/
+
+#ifdef CONFIG_SOC_AU1550
+#define MEM_PHYS_ADDR 0x14000000
+#define STATIC_MEM_PHYS_ADDR 0x14001000
+#define IC0_PHYS_ADDR 0x10400000
+#define IC1_PHYS_ADDR 0x11800000
+#define USBH_PHYS_ADDR 0x14020000
+#define USBD_PHYS_ADDR 0x10200000
+#define PCI_PHYS_ADDR 0x14005000
+#define MAC0_PHYS_ADDR 0x10500000
+#define MAC1_PHYS_ADDR 0x10510000
+#define MACEN_PHYS_ADDR 0x10520000
+#define MACDMA0_PHYS_ADDR 0x14004000
+#define MACDMA1_PHYS_ADDR 0x14004200
+#define UART0_PHYS_ADDR 0x11100000
+#define UART1_PHYS_ADDR 0x11200000
+#define UART3_PHYS_ADDR 0x11400000
+#define GPIO2_PHYS_ADDR 0x11700000
+#define SYS_PHYS_ADDR 0x11900000
+#define DDMA_PHYS_ADDR 0x14002000
+#define PE_PHYS_ADDR 0x14008000
+#define PSC0_PHYS_ADDR 0x11A00000
+#define PSC1_PHYS_ADDR 0x11B00000
+#define PSC2_PHYS_ADDR 0x10A00000
+#define PSC3_PHYS_ADDR 0x10B00000
+#define PCI_MEM_PHYS_ADDR 0x400000000ULL
+#define PCI_IO_PHYS_ADDR 0x500000000ULL
+#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL
+#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
+#endif
+
+/***********************************************************************/
+
+#ifdef CONFIG_SOC_AU1200
+#define MEM_PHYS_ADDR 0x14000000
+#define STATIC_MEM_PHYS_ADDR 0x14001000
+#define AES_PHYS_ADDR 0x10300000
+#define CIM_PHYS_ADDR 0x14004000
+#define IC0_PHYS_ADDR 0x10400000
+#define IC1_PHYS_ADDR 0x11800000
+#define USBM_PHYS_ADDR 0x14020000
+#define USBH_PHYS_ADDR 0x14020100
+#define UART0_PHYS_ADDR 0x11100000
+#define UART1_PHYS_ADDR 0x11200000
+#define GPIO2_PHYS_ADDR 0x11700000
+#define SYS_PHYS_ADDR 0x11900000
+#define DDMA_PHYS_ADDR 0x14002000
+#define PSC0_PHYS_ADDR 0x11A00000
+#define PSC1_PHYS_ADDR 0x11B00000
+#define SD0_PHYS_ADDR 0x10600000
+#define SD1_PHYS_ADDR 0x10680000
+#define LCD_PHYS_ADDR 0x15000000
+#define SWCNT_PHYS_ADDR 0x1110010C
+#define MAEFE_PHYS_ADDR 0x14012000
+#define MAEBE_PHYS_ADDR 0x14010000
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
+#endif
+
+/* Static Bus Controller */
+#define MEM_STCFG0 0xB4001000
+#define MEM_STTIME0 0xB4001004
+#define MEM_STADDR0 0xB4001008
+
+#define MEM_STCFG1 0xB4001010
+#define MEM_STTIME1 0xB4001014
+#define MEM_STADDR1 0xB4001018
+
+#define MEM_STCFG2 0xB4001020
+#define MEM_STTIME2 0xB4001024
+#define MEM_STADDR2 0xB4001028
+
+#define MEM_STCFG3 0xB4001030
+#define MEM_STTIME3 0xB4001034
+#define MEM_STADDR3 0xB4001038
+
+#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
+#define MEM_STNDCTL 0xB4001100
+#define MEM_STSTAT 0xB4001104
+
+#define MEM_STNAND_CMD 0x0
+#define MEM_STNAND_ADDR 0x4
+#define MEM_STNAND_DATA 0x20
+#endif
+
+/* Interrupt Controller 0 */
+#define IC0_CFG0RD 0xB0400040
+#define IC0_CFG0SET 0xB0400040
+#define IC0_CFG0CLR 0xB0400044
+
+#define IC0_CFG1RD 0xB0400048
+#define IC0_CFG1SET 0xB0400048
+#define IC0_CFG1CLR 0xB040004C
+
+#define IC0_CFG2RD 0xB0400050
+#define IC0_CFG2SET 0xB0400050
+#define IC0_CFG2CLR 0xB0400054
+
+#define IC0_REQ0INT 0xB0400054
+#define IC0_SRCRD 0xB0400058
+#define IC0_SRCSET 0xB0400058
+#define IC0_SRCCLR 0xB040005C
+#define IC0_REQ1INT 0xB040005C
+
+#define IC0_ASSIGNRD 0xB0400060
+#define IC0_ASSIGNSET 0xB0400060
+#define IC0_ASSIGNCLR 0xB0400064
+
+#define IC0_WAKERD 0xB0400068
+#define IC0_WAKESET 0xB0400068
+#define IC0_WAKECLR 0xB040006C
+
+#define IC0_MASKRD 0xB0400070
+#define IC0_MASKSET 0xB0400070
+#define IC0_MASKCLR 0xB0400074
+
+#define IC0_RISINGRD 0xB0400078
+#define IC0_RISINGCLR 0xB0400078
+#define IC0_FALLINGRD 0xB040007C
+#define IC0_FALLINGCLR 0xB040007C
+
+#define IC0_TESTBIT 0xB0400080
+
+/* Interrupt Controller 1 */
+#define IC1_CFG0RD 0xB1800040
+#define IC1_CFG0SET 0xB1800040
+#define IC1_CFG0CLR 0xB1800044
+
+#define IC1_CFG1RD 0xB1800048
+#define IC1_CFG1SET 0xB1800048
+#define IC1_CFG1CLR 0xB180004C
+
+#define IC1_CFG2RD 0xB1800050
+#define IC1_CFG2SET 0xB1800050
+#define IC1_CFG2CLR 0xB1800054
+
+#define IC1_REQ0INT 0xB1800054
+#define IC1_SRCRD 0xB1800058
+#define IC1_SRCSET 0xB1800058
+#define IC1_SRCCLR 0xB180005C
+#define IC1_REQ1INT 0xB180005C
+
+#define IC1_ASSIGNRD 0xB1800060
+#define IC1_ASSIGNSET 0xB1800060
+#define IC1_ASSIGNCLR 0xB1800064
+
+#define IC1_WAKERD 0xB1800068
+#define IC1_WAKESET 0xB1800068
+#define IC1_WAKECLR 0xB180006C
+
+#define IC1_MASKRD 0xB1800070
+#define IC1_MASKSET 0xB1800070
+#define IC1_MASKCLR 0xB1800074
+
+#define IC1_RISINGRD 0xB1800078
+#define IC1_RISINGCLR 0xB1800078
+#define IC1_FALLINGRD 0xB180007C
+#define IC1_FALLINGCLR 0xB180007C
+
+#define IC1_TESTBIT 0xB1800080
+
+/* Interrupt Configuration Modes */
+#define INTC_INT_DISABLED 0x0
+#define INTC_INT_RISE_EDGE 0x1
+#define INTC_INT_FALL_EDGE 0x2
+#define INTC_INT_RISE_AND_FALL_EDGE 0x3
+#define INTC_INT_HIGH_LEVEL 0x5
+#define INTC_INT_LOW_LEVEL 0x6
+#define INTC_INT_HIGH_AND_LOW_LEVEL 0x7
+
+/* Interrupt Numbers */
+/* Au1000 */
+#ifdef CONFIG_SOC_AU1000
+enum soc_au1000_ints {
+ AU1000_FIRST_INT = MIPS_CPU_IRQ_BASE + 8,
+ AU1000_UART0_INT = AU1000_FIRST_INT,
+ AU1000_UART1_INT, /* au1000 */
+ AU1000_UART2_INT, /* au1000 */
+ AU1000_UART3_INT,
+ AU1000_SSI0_INT, /* au1000 */
+ AU1000_SSI1_INT, /* au1000 */
+ AU1000_DMA_INT_BASE,
+
+ AU1000_TOY_INT = AU1000_FIRST_INT + 14,
+ AU1000_TOY_MATCH0_INT,
+ AU1000_TOY_MATCH1_INT,
+ AU1000_TOY_MATCH2_INT,
+ AU1000_RTC_INT,
+ AU1000_RTC_MATCH0_INT,
+ AU1000_RTC_MATCH1_INT,
+ AU1000_RTC_MATCH2_INT,
+ AU1000_IRDA_TX_INT, /* au1000 */
+ AU1000_IRDA_RX_INT, /* au1000 */
+ AU1000_USB_DEV_REQ_INT,
+ AU1000_USB_DEV_SUS_INT,
+ AU1000_USB_HOST_INT,
+ AU1000_ACSYNC_INT,
+ AU1000_MAC0_DMA_INT,
+ AU1000_MAC1_DMA_INT,
+ AU1000_I2S_UO_INT, /* au1000 */
+ AU1000_AC97C_INT,
+ AU1000_GPIO_0,
+ AU1000_GPIO_1,
+ AU1000_GPIO_2,
+ AU1000_GPIO_3,
+ AU1000_GPIO_4,
+ AU1000_GPIO_5,
+ AU1000_GPIO_6,
+ AU1000_GPIO_7,
+ AU1000_GPIO_8,
+ AU1000_GPIO_9,
+ AU1000_GPIO_10,
+ AU1000_GPIO_11,
+ AU1000_GPIO_12,
+ AU1000_GPIO_13,
+ AU1000_GPIO_14,
+ AU1000_GPIO_15,
+ AU1000_GPIO_16,
+ AU1000_GPIO_17,
+ AU1000_GPIO_18,
+ AU1000_GPIO_19,
+ AU1000_GPIO_20,
+ AU1000_GPIO_21,
+ AU1000_GPIO_22,
+ AU1000_GPIO_23,
+ AU1000_GPIO_24,
+ AU1000_GPIO_25,
+ AU1000_GPIO_26,
+ AU1000_GPIO_27,
+ AU1000_GPIO_28,
+ AU1000_GPIO_29,
+ AU1000_GPIO_30,
+ AU1000_GPIO_31,
+};
+
+#define UART0_ADDR 0xB1100000
+#define UART1_ADDR 0xB1200000
+#define UART2_ADDR 0xB1300000
+#define UART3_ADDR 0xB1400000
+
+#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
+#define USB_HOST_CONFIG 0xB017FFFC
+
+#define AU1000_ETH0_BASE 0xB0500000
+#define AU1000_ETH1_BASE 0xB0510000
+#define AU1000_MAC0_ENABLE 0xB0520000
+#define AU1000_MAC1_ENABLE 0xB0520004
+#define NUM_ETH_INTERFACES 2
+#endif /* CONFIG_SOC_AU1000 */
+
+/* Au1500 */
+#ifdef CONFIG_SOC_AU1500
+enum soc_au1500_ints {
+ AU1500_FIRST_INT = MIPS_CPU_IRQ_BASE + 8,
+ AU1500_UART0_INT = AU1500_FIRST_INT,
+ AU1000_PCI_INTA, /* au1500 */
+ AU1000_PCI_INTB, /* au1500 */
+ AU1500_UART3_INT,
+ AU1000_PCI_INTC, /* au1500 */
+ AU1000_PCI_INTD, /* au1500 */
+ AU1000_DMA_INT_BASE,
+
+ AU1000_TOY_INT = AU1500_FIRST_INT + 14,
+ AU1000_TOY_MATCH0_INT,
+ AU1000_TOY_MATCH1_INT,
+ AU1000_TOY_MATCH2_INT,
+ AU1000_RTC_INT,
+ AU1000_RTC_MATCH0_INT,
+ AU1000_RTC_MATCH1_INT,
+ AU1000_RTC_MATCH2_INT,
+ AU1500_PCI_ERR_INT,
+ AU1500_RESERVED_INT,
+ AU1000_USB_DEV_REQ_INT,
+ AU1000_USB_DEV_SUS_INT,
+ AU1000_USB_HOST_INT,
+ AU1000_ACSYNC_INT,
+ AU1500_MAC0_DMA_INT,
+ AU1500_MAC1_DMA_INT,
+ AU1000_AC97C_INT = AU1500_FIRST_INT + 31,
+ AU1000_GPIO_0,
+ AU1000_GPIO_1,
+ AU1000_GPIO_2,
+ AU1000_GPIO_3,
+ AU1000_GPIO_4,
+ AU1000_GPIO_5,
+ AU1000_GPIO_6,
+ AU1000_GPIO_7,
+ AU1000_GPIO_8,
+ AU1000_GPIO_9,
+ AU1000_GPIO_10,
+ AU1000_GPIO_11,
+ AU1000_GPIO_12,
+ AU1000_GPIO_13,
+ AU1000_GPIO_14,
+ AU1000_GPIO_15,
+ AU1500_GPIO_200,
+ AU1500_GPIO_201,
+ AU1500_GPIO_202,
+ AU1500_GPIO_203,
+ AU1500_GPIO_20,
+ AU1500_GPIO_204,
+ AU1500_GPIO_205,
+ AU1500_GPIO_23,
+ AU1500_GPIO_24,
+ AU1500_GPIO_25,
+ AU1500_GPIO_26,
+ AU1500_GPIO_27,
+ AU1500_GPIO_28,
+ AU1500_GPIO_206,
+ AU1500_GPIO_207,
+ AU1500_GPIO_208_215,
+};
+
+/* shortcuts */
+#define INTA AU1000_PCI_INTA
+#define INTB AU1000_PCI_INTB
+#define INTC AU1000_PCI_INTC
+#define INTD AU1000_PCI_INTD
+
+#define UART0_ADDR 0xB1100000
+#define UART3_ADDR 0xB1400000
+
+#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
+#define USB_HOST_CONFIG 0xB017fffc
+
+#define AU1500_ETH0_BASE 0xB1500000
+#define AU1500_ETH1_BASE 0xB1510000
+#define AU1500_MAC0_ENABLE 0xB1520000
+#define AU1500_MAC1_ENABLE 0xB1520004
+#define NUM_ETH_INTERFACES 2
+#endif /* CONFIG_SOC_AU1500 */
+
+/* Au1100 */
+#ifdef CONFIG_SOC_AU1100
+enum soc_au1100_ints {
+ AU1100_FIRST_INT = MIPS_CPU_IRQ_BASE + 8,
+ AU1100_UART0_INT,
+ AU1100_UART1_INT,
+ AU1100_SD_INT,
+ AU1100_UART3_INT,
+ AU1000_SSI0_INT,
+ AU1000_SSI1_INT,
+ AU1000_DMA_INT_BASE,
+
+ AU1000_TOY_INT = AU1100_FIRST_INT + 14,
+ AU1000_TOY_MATCH0_INT,
+ AU1000_TOY_MATCH1_INT,
+ AU1000_TOY_MATCH2_INT,
+ AU1000_RTC_INT,
+ AU1000_RTC_MATCH0_INT,
+ AU1000_RTC_MATCH1_INT,
+ AU1000_RTC_MATCH2_INT,
+ AU1000_IRDA_TX_INT,
+ AU1000_IRDA_RX_INT,
+ AU1000_USB_DEV_REQ_INT,
+ AU1000_USB_DEV_SUS_INT,
+ AU1000_USB_HOST_INT,
+ AU1000_ACSYNC_INT,
+ AU1100_MAC0_DMA_INT,
+ AU1100_GPIO_208_215,
+ AU1100_LCD_INT,
+ AU1000_AC97C_INT,
+ AU1000_GPIO_0,
+ AU1000_GPIO_1,
+ AU1000_GPIO_2,
+ AU1000_GPIO_3,
+ AU1000_GPIO_4,
+ AU1000_GPIO_5,
+ AU1000_GPIO_6,
+ AU1000_GPIO_7,
+ AU1000_GPIO_8,
+ AU1000_GPIO_9,
+ AU1000_GPIO_10,
+ AU1000_GPIO_11,
+ AU1000_GPIO_12,
+ AU1000_GPIO_13,
+ AU1000_GPIO_14,
+ AU1000_GPIO_15,
+ AU1000_GPIO_16,
+ AU1000_GPIO_17,
+ AU1000_GPIO_18,
+ AU1000_GPIO_19,
+ AU1000_GPIO_20,
+ AU1000_GPIO_21,
+ AU1000_GPIO_22,
+ AU1000_GPIO_23,
+ AU1000_GPIO_24,
+ AU1000_GPIO_25,
+ AU1000_GPIO_26,
+ AU1000_GPIO_27,
+ AU1000_GPIO_28,
+ AU1000_GPIO_29,
+ AU1000_GPIO_30,
+ AU1000_GPIO_31,
+};
+
+#define UART0_ADDR 0xB1100000
+#define UART1_ADDR 0xB1200000
+#define UART3_ADDR 0xB1400000
+
+#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
+#define USB_HOST_CONFIG 0xB017FFFC
+
+#define AU1100_ETH0_BASE 0xB0500000
+#define AU1100_MAC0_ENABLE 0xB0520000
+#define NUM_ETH_INTERFACES 1
+#endif /* CONFIG_SOC_AU1100 */
+
+#ifdef CONFIG_SOC_AU1550
+enum soc_au1550_ints {
+ AU1550_FIRST_INT = MIPS_CPU_IRQ_BASE + 8,
+ AU1550_UART0_INT = AU1550_FIRST_INT,
+ AU1550_PCI_INTA,
+ AU1550_PCI_INTB,
+ AU1550_DDMA_INT,
+ AU1550_CRYPTO_INT,
+ AU1550_PCI_INTC,
+ AU1550_PCI_INTD,
+ AU1550_PCI_RST_INT,
+ AU1550_UART1_INT,
+ AU1550_UART3_INT,
+ AU1550_PSC0_INT,
+ AU1550_PSC1_INT,
+ AU1550_PSC2_INT,
+ AU1550_PSC3_INT,
+ AU1000_TOY_INT,
+ AU1000_TOY_MATCH0_INT,
+ AU1000_TOY_MATCH1_INT,
+ AU1000_TOY_MATCH2_INT,
+ AU1000_RTC_INT,
+ AU1000_RTC_MATCH0_INT,
+ AU1000_RTC_MATCH1_INT,
+ AU1000_RTC_MATCH2_INT,
+
+ AU1550_NAND_INT = AU1550_FIRST_INT + 23,
+ AU1550_USB_DEV_REQ_INT,
+ AU1000_USB_DEV_REQ_INT = AU1550_USB_DEV_REQ_INT,
+ AU1550_USB_DEV_SUS_INT,
+ AU1000_USB_DEV_SUS_INT = AU1550_USB_DEV_SUS_INT,
+ AU1550_USB_HOST_INT,
+ AU1000_USB_HOST_INT = AU1550_USB_HOST_INT,
+ AU1550_MAC0_DMA_INT,
+ AU1550_MAC1_DMA_INT,
+ AU1000_GPIO_0 = AU1550_FIRST_INT + 32,
+ AU1000_GPIO_1,
+ AU1000_GPIO_2,
+ AU1000_GPIO_3,
+ AU1000_GPIO_4,
+ AU1000_GPIO_5,
+ AU1000_GPIO_6,
+ AU1000_GPIO_7,
+ AU1000_GPIO_8,
+ AU1000_GPIO_9,
+ AU1000_GPIO_10,
+ AU1000_GPIO_11,
+ AU1000_GPIO_12,
+ AU1000_GPIO_13,
+ AU1000_GPIO_14,
+ AU1000_GPIO_15,
+ AU1550_GPIO_200,
+ AU1500_GPIO_201_205, /* Logical or of GPIO201:205 */
+ AU1500_GPIO_16,
+ AU1500_GPIO_17,
+ AU1500_GPIO_20,
+ AU1500_GPIO_21,
+ AU1500_GPIO_22,
+ AU1500_GPIO_23,
+ AU1500_GPIO_24,
+ AU1500_GPIO_25,
+ AU1500_GPIO_26,
+ AU1500_GPIO_27,
+ AU1500_GPIO_28,
+ AU1500_GPIO_206,
+ AU1500_GPIO_207,
+ AU1500_GPIO_208_218, /* Logical or of GPIO208:218 */
+};
+
+/* shortcuts */
+#define INTA AU1550_PCI_INTA
+#define INTB AU1550_PCI_INTB
+#define INTC AU1550_PCI_INTC
+#define INTD AU1550_PCI_INTD
+
+#define UART0_ADDR 0xB1100000
+#define UART1_ADDR 0xB1200000
+#define UART3_ADDR 0xB1400000
+
+#define USB_OHCI_BASE 0x14020000 /* phys addr for ioremap */
+#define USB_OHCI_LEN 0x00060000
+#define USB_HOST_CONFIG 0xB4027ffc
+
+#define AU1550_ETH0_BASE 0xB0500000
+#define AU1550_ETH1_BASE 0xB0510000
+#define AU1550_MAC0_ENABLE 0xB0520000
+#define AU1550_MAC1_ENABLE 0xB0520004
+#define NUM_ETH_INTERFACES 2
+#endif /* CONFIG_SOC_AU1550 */
+
+#ifdef CONFIG_SOC_AU1200
+enum soc_au1200_ints {
+ AU1200_FIRST_INT = MIPS_CPU_IRQ_BASE + 8,
+ AU1200_UART0_INT = AU1200_FIRST_INT,
+ AU1200_SWT_INT,
+ AU1200_SD_INT,
+ AU1200_DDMA_INT,
+ AU1200_MAE_BE_INT,
+ AU1200_GPIO_200,
+ AU1200_GPIO_201,
+ AU1200_GPIO_202,
+ AU1200_UART1_INT,
+ AU1200_MAE_FE_INT,
+ AU1200_PSC0_INT,
+ AU1200_PSC1_INT,
+ AU1200_AES_INT,
+ AU1200_CAMERA_INT,
+ AU1000_TOY_INT,
+ AU1000_TOY_MATCH0_INT,
+ AU1000_TOY_MATCH1_INT,
+ AU1000_TOY_MATCH2_INT,
+ AU1000_RTC_INT,
+ AU1000_RTC_MATCH0_INT,
+ AU1000_RTC_MATCH1_INT,
+ AU1000_RTC_MATCH2_INT,
+
+ AU1200_NAND_INT = AU1200_FIRST_INT + 23,
+ AU1200_GPIO_204,
+ AU1200_GPIO_205,
+ AU1200_GPIO_206,
+ AU1200_GPIO_207,
+ AU1200_GPIO_208_215, /* Logical OR of 208:215 */
+ AU1200_USB_INT,
+ AU1000_USB_HOST_INT = AU1200_USB_INT,
+ AU1200_LCD_INT,
+ AU1200_MAE_BOTH_INT,
+ AU1000_GPIO_0,
+ AU1000_GPIO_1,
+ AU1000_GPIO_2,
+ AU1000_GPIO_3,
+ AU1000_GPIO_4,
+ AU1000_GPIO_5,
+ AU1000_GPIO_6,
+ AU1000_GPIO_7,
+ AU1000_GPIO_8,
+ AU1000_GPIO_9,
+ AU1000_GPIO_10,
+ AU1000_GPIO_11,
+ AU1000_GPIO_12,
+ AU1000_GPIO_13,
+ AU1000_GPIO_14,
+ AU1000_GPIO_15,
+ AU1000_GPIO_16,
+ AU1000_GPIO_17,
+ AU1000_GPIO_18,
+ AU1000_GPIO_19,
+ AU1000_GPIO_20,
+ AU1000_GPIO_21,
+ AU1000_GPIO_22,
+ AU1000_GPIO_23,
+ AU1000_GPIO_24,
+ AU1000_GPIO_25,
+ AU1000_GPIO_26,
+ AU1000_GPIO_27,
+ AU1000_GPIO_28,
+ AU1000_GPIO_29,
+ AU1000_GPIO_30,
+ AU1000_GPIO_31,
+};
+
+#define UART0_ADDR 0xB1100000
+#define UART1_ADDR 0xB1200000
+
+#define USB_UOC_BASE 0x14020020
+#define USB_UOC_LEN 0x20
+#define USB_OHCI_BASE 0x14020100
+#define USB_OHCI_LEN 0x100
+#define USB_EHCI_BASE 0x14020200
+#define USB_EHCI_LEN 0x100
+#define USB_UDC_BASE 0x14022000
+#define USB_UDC_LEN 0x2000
+#define USB_MSR_BASE 0xB4020000
+#define USB_MSR_MCFG 4
+#define USBMSRMCFG_OMEMEN 0
+#define USBMSRMCFG_OBMEN 1
+#define USBMSRMCFG_EMEMEN 2
+#define USBMSRMCFG_EBMEN 3
+#define USBMSRMCFG_DMEMEN 4
+#define USBMSRMCFG_DBMEN 5
+#define USBMSRMCFG_GMEMEN 6
+#define USBMSRMCFG_OHCCLKEN 16
+#define USBMSRMCFG_EHCCLKEN 17
+#define USBMSRMCFG_UDCCLKEN 18
+#define USBMSRMCFG_PHYPLLEN 19
+#define USBMSRMCFG_RDCOMB 30
+#define USBMSRMCFG_PFEN 31
+
+#endif /* CONFIG_SOC_AU1200 */
+
+#define AU1000_INTC0_INT_BASE (MIPS_CPU_IRQ_BASE + 8)
+#define AU1000_INTC0_INT_LAST (AU1000_INTC0_INT_BASE + 31)
+#define AU1000_INTC1_INT_BASE (AU1000_INTC0_INT_BASE + 32)
+#define AU1000_INTC1_INT_LAST (AU1000_INTC1_INT_BASE + 31)
+
+#define AU1000_MAX_INTR AU1000_INTC1_INT_LAST
+#define INTX 0xFF /* not valid */
+
+/* Programmable Counters 0 and 1 */
+#define SYS_BASE 0xB1900000
+#define SYS_COUNTER_CNTRL (SYS_BASE + 0x14)
+# define SYS_CNTRL_E1S (1 << 23)
+# define SYS_CNTRL_T1S (1 << 20)
+# define SYS_CNTRL_M21 (1 << 19)
+# define SYS_CNTRL_M11 (1 << 18)
+# define SYS_CNTRL_M01 (1 << 17)
+# define SYS_CNTRL_C1S (1 << 16)
+# define SYS_CNTRL_BP (1 << 14)
+# define SYS_CNTRL_EN1 (1 << 13)
+# define SYS_CNTRL_BT1 (1 << 12)
+# define SYS_CNTRL_EN0 (1 << 11)
+# define SYS_CNTRL_BT0 (1 << 10)
+# define SYS_CNTRL_E0 (1 << 8)
+# define SYS_CNTRL_E0S (1 << 7)
+# define SYS_CNTRL_32S (1 << 5)
+# define SYS_CNTRL_T0S (1 << 4)
+# define SYS_CNTRL_M20 (1 << 3)
+# define SYS_CNTRL_M10 (1 << 2)
+# define SYS_CNTRL_M00 (1 << 1)
+# define SYS_CNTRL_C0S (1 << 0)
+
+/* Programmable Counter 0 Registers */
+#define SYS_TOYTRIM (SYS_BASE + 0)
+#define SYS_TOYWRITE (SYS_BASE + 4)
+#define SYS_TOYMATCH0 (SYS_BASE + 8)
+#define SYS_TOYMATCH1 (SYS_BASE + 0xC)
+#define SYS_TOYMATCH2 (SYS_BASE + 0x10)
+#define SYS_TOYREAD (SYS_BASE + 0x40)
+
+/* Programmable Counter 1 Registers */
+#define SYS_RTCTRIM (SYS_BASE + 0x44)
+#define SYS_RTCWRITE (SYS_BASE + 0x48)
+#define SYS_RTCMATCH0 (SYS_BASE + 0x4C)
+#define SYS_RTCMATCH1 (SYS_BASE + 0x50)
+#define SYS_RTCMATCH2 (SYS_BASE + 0x54)
+#define SYS_RTCREAD (SYS_BASE + 0x58)
+
+/* I2S Controller */
+#define I2S_DATA 0xB1000000
+# define I2S_DATA_MASK 0xffffff
+#define I2S_CONFIG 0xB1000004
+# define I2S_CONFIG_XU (1 << 25)
+# define I2S_CONFIG_XO (1 << 24)
+# define I2S_CONFIG_RU (1 << 23)
+# define I2S_CONFIG_RO (1 << 22)
+# define I2S_CONFIG_TR (1 << 21)
+# define I2S_CONFIG_TE (1 << 20)
+# define I2S_CONFIG_TF (1 << 19)
+# define I2S_CONFIG_RR (1 << 18)
+# define I2S_CONFIG_RE (1 << 17)
+# define I2S_CONFIG_RF (1 << 16)
+# define I2S_CONFIG_PD (1 << 11)
+# define I2S_CONFIG_LB (1 << 10)
+# define I2S_CONFIG_IC (1 << 9)
+# define I2S_CONFIG_FM_BIT 7
+# define I2S_CONFIG_FM_MASK (0x3 << I2S_CONFIG_FM_BIT)
+# define I2S_CONFIG_FM_I2S (0x0 << I2S_CONFIG_FM_BIT)
+# define I2S_CONFIG_FM_LJ (0x1 << I2S_CONFIG_FM_BIT)
+# define I2S_CONFIG_FM_RJ (0x2 << I2S_CONFIG_FM_BIT)
+# define I2S_CONFIG_TN (1 << 6)
+# define I2S_CONFIG_RN (1 << 5)
+# define I2S_CONFIG_SZ_BIT 0
+# define I2S_CONFIG_SZ_MASK (0x1F << I2S_CONFIG_SZ_BIT)
+
+#define I2S_CONTROL 0xB1000008
+# define I2S_CONTROL_D (1 << 1)
+# define I2S_CONTROL_CE (1 << 0)
+
+/* USB Host Controller */
+#ifndef USB_OHCI_LEN
+#define USB_OHCI_LEN 0x00100000
+#endif
+
+#ifndef CONFIG_SOC_AU1200
+
+/* USB Device Controller */
+#define USBD_EP0RD 0xB0200000
+#define USBD_EP0WR 0xB0200004
+#define USBD_EP2WR 0xB0200008
+#define USBD_EP3WR 0xB020000C
+#define USBD_EP4RD 0xB0200010
+#define USBD_EP5RD 0xB0200014
+#define USBD_INTEN 0xB0200018
+#define USBD_INTSTAT 0xB020001C
+# define USBDEV_INT_SOF (1 << 12)
+# define USBDEV_INT_HF_BIT 6
+# define USBDEV_INT_HF_MASK (0x3f << USBDEV_INT_HF_BIT)
+# define USBDEV_INT_CMPLT_BIT 0
+# define USBDEV_INT_CMPLT_MASK (0x3f << USBDEV_INT_CMPLT_BIT)
+#define USBD_CONFIG 0xB0200020
+#define USBD_EP0CS 0xB0200024
+#define USBD_EP2CS 0xB0200028
+#define USBD_EP3CS 0xB020002C
+#define USBD_EP4CS 0xB0200030
+#define USBD_EP5CS 0xB0200034
+# define USBDEV_CS_SU (1 << 14)
+# define USBDEV_CS_NAK (1 << 13)
+# define USBDEV_CS_ACK (1 << 12)
+# define USBDEV_CS_BUSY (1 << 11)
+# define USBDEV_CS_TSIZE_BIT 1
+# define USBDEV_CS_TSIZE_MASK (0x3ff << USBDEV_CS_TSIZE_BIT)
+# define USBDEV_CS_STALL (1 << 0)
+#define USBD_EP0RDSTAT 0xB0200040
+#define USBD_EP0WRSTAT 0xB0200044
+#define USBD_EP2WRSTAT 0xB0200048
+#define USBD_EP3WRSTAT 0xB020004C
+#define USBD_EP4RDSTAT 0xB0200050
+#define USBD_EP5RDSTAT 0xB0200054
+# define USBDEV_FSTAT_FLUSH (1 << 6)
+# define USBDEV_FSTAT_UF (1 << 5)
+# define USBDEV_FSTAT_OF (1 << 4)
+# define USBDEV_FSTAT_FCNT_BIT 0
+# define USBDEV_FSTAT_FCNT_MASK (0x0f << USBDEV_FSTAT_FCNT_BIT)
+#define USBD_ENABLE 0xB0200058
+# define USBDEV_ENABLE (1 << 1)
+# define USBDEV_CE (1 << 0)
+
+#endif /* !CONFIG_SOC_AU1200 */
+
+/* Ethernet Controllers */
+
+/* 4 byte offsets from AU1000_ETH_BASE */
+#define MAC_CONTROL 0x0
+# define MAC_RX_ENABLE (1 << 2)
+# define MAC_TX_ENABLE (1 << 3)
+# define MAC_DEF_CHECK (1 << 5)
+# define MAC_SET_BL(X) (((X) & 0x3) << 6)
+# define MAC_AUTO_PAD (1 << 8)
+# define MAC_DISABLE_RETRY (1 << 10)
+# define MAC_DISABLE_BCAST (1 << 11)
+# define MAC_LATE_COL (1 << 12)
+# define MAC_HASH_MODE (1 << 13)
+# define MAC_HASH_ONLY (1 << 15)
+# define MAC_PASS_ALL (1 << 16)
+# define MAC_INVERSE_FILTER (1 << 17)
+# define MAC_PROMISCUOUS (1 << 18)
+# define MAC_PASS_ALL_MULTI (1 << 19)
+# define MAC_FULL_DUPLEX (1 << 20)
+# define MAC_NORMAL_MODE 0
+# define MAC_INT_LOOPBACK (1 << 21)
+# define MAC_EXT_LOOPBACK (1 << 22)
+# define MAC_DISABLE_RX_OWN (1 << 23)
+# define MAC_BIG_ENDIAN (1 << 30)
+# define MAC_RX_ALL (1 << 31)
+#define MAC_ADDRESS_HIGH 0x4
+#define MAC_ADDRESS_LOW 0x8
+#define MAC_MCAST_HIGH 0xC
+#define MAC_MCAST_LOW 0x10
+#define MAC_MII_CNTRL 0x14
+# define MAC_MII_BUSY (1 << 0)
+# define MAC_MII_READ 0
+# define MAC_MII_WRITE (1 << 1)
+# define MAC_SET_MII_SELECT_REG(X) (((X) & 0x1f) << 6)
+# define MAC_SET_MII_SELECT_PHY(X) (((X) & 0x1f) << 11)
+#define MAC_MII_DATA 0x18
+#define MAC_FLOW_CNTRL 0x1C
+# define MAC_FLOW_CNTRL_BUSY (1 << 0)
+# define MAC_FLOW_CNTRL_ENABLE (1 << 1)
+# define MAC_PASS_CONTROL (1 << 2)
+# define MAC_SET_PAUSE(X) (((X) & 0xffff) << 16)
+#define MAC_VLAN1_TAG 0x20
+#define MAC_VLAN2_TAG 0x24
+
+/* Ethernet Controller Enable */
+
+# define MAC_EN_CLOCK_ENABLE (1 << 0)
+# define MAC_EN_RESET0 (1 << 1)
+# define MAC_EN_TOSS (0 << 2)
+# define MAC_EN_CACHEABLE (1 << 3)
+# define MAC_EN_RESET1 (1 << 4)
+# define MAC_EN_RESET2 (1 << 5)
+# define MAC_DMA_RESET (1 << 6)
+
+/* Ethernet Controller DMA Channels */
+
+#define MAC0_TX_DMA_ADDR 0xB4004000
+#define MAC1_TX_DMA_ADDR 0xB4004200
+/* offsets from MAC_TX_RING_ADDR address */
+#define MAC_TX_BUFF0_STATUS 0x0
+# define TX_FRAME_ABORTED (1 << 0)
+# define TX_JAB_TIMEOUT (1 << 1)
+# define TX_NO_CARRIER (1 << 2)
+# define TX_LOSS_CARRIER (1 << 3)
+# define TX_EXC_DEF (1 << 4)
+# define TX_LATE_COLL_ABORT (1 << 5)
+# define TX_EXC_COLL (1 << 6)
+# define TX_UNDERRUN (1 << 7)
+# define TX_DEFERRED (1 << 8)
+# define TX_LATE_COLL (1 << 9)
+# define TX_COLL_CNT_MASK (0xF << 10)
+# define TX_PKT_RETRY (1 << 31)
+#define MAC_TX_BUFF0_ADDR 0x4
+# define TX_DMA_ENABLE (1 << 0)
+# define TX_T_DONE (1 << 1)
+# define TX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3)
+#define MAC_TX_BUFF0_LEN 0x8
+#define MAC_TX_BUFF1_STATUS 0x10
+#define MAC_TX_BUFF1_ADDR 0x14
+#define MAC_TX_BUFF1_LEN 0x18
+#define MAC_TX_BUFF2_STATUS 0x20
+#define MAC_TX_BUFF2_ADDR 0x24
+#define MAC_TX_BUFF2_LEN 0x28
+#define MAC_TX_BUFF3_STATUS 0x30
+#define MAC_TX_BUFF3_ADDR 0x34
+#define MAC_TX_BUFF3_LEN 0x38
+
+#define MAC0_RX_DMA_ADDR 0xB4004100
+#define MAC1_RX_DMA_ADDR 0xB4004300
+/* offsets from MAC_RX_RING_ADDR */
+#define MAC_RX_BUFF0_STATUS 0x0
+# define RX_FRAME_LEN_MASK 0x3fff
+# define RX_WDOG_TIMER (1 << 14)
+# define RX_RUNT (1 << 15)
+# define RX_OVERLEN (1 << 16)
+# define RX_COLL (1 << 17)
+# define RX_ETHER (1 << 18)
+# define RX_MII_ERROR (1 << 19)
+# define RX_DRIBBLING (1 << 20)
+# define RX_CRC_ERROR (1 << 21)
+# define RX_VLAN1 (1 << 22)
+# define RX_VLAN2 (1 << 23)
+# define RX_LEN_ERROR (1 << 24)
+# define RX_CNTRL_FRAME (1 << 25)
+# define RX_U_CNTRL_FRAME (1 << 26)
+# define RX_MCAST_FRAME (1 << 27)
+# define RX_BCAST_FRAME (1 << 28)
+# define RX_FILTER_FAIL (1 << 29)
+# define RX_PACKET_FILTER (1 << 30)
+# define RX_MISSED_FRAME (1 << 31)
+
+# define RX_ERROR (RX_WDOG_TIMER | RX_RUNT | RX_OVERLEN | \
+ RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \
+ RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME)
+#define MAC_RX_BUFF0_ADDR 0x4
+# define RX_DMA_ENABLE (1 << 0)
+# define RX_T_DONE (1 << 1)
+# define RX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3)
+# define RX_SET_BUFF_ADDR(X) ((X) & 0xffffffc0)
+#define MAC_RX_BUFF1_STATUS 0x10
+#define MAC_RX_BUFF1_ADDR 0x14
+#define MAC_RX_BUFF2_STATUS 0x20
+#define MAC_RX_BUFF2_ADDR 0x24
+#define MAC_RX_BUFF3_STATUS 0x30
+#define MAC_RX_BUFF3_ADDR 0x34
+
+/* UARTS 0-3 */
+#define UART_BASE UART0_ADDR
+#ifdef CONFIG_SOC_AU1200
+#define UART_DEBUG_BASE UART1_ADDR
+#else
+#define UART_DEBUG_BASE UART3_ADDR
+#endif
+
+#define UART_RX 0 /* Receive buffer */
+#define UART_TX 4 /* Transmit buffer */
+#define UART_IER 8 /* Interrupt Enable Register */
+#define UART_IIR 0xC /* Interrupt ID Register */
+#define UART_FCR 0x10 /* FIFO Control Register */
+#define UART_LCR 0x14 /* Line Control Register */
+#define UART_MCR 0x18 /* Modem Control Register */
+#define UART_LSR 0x1C /* Line Status Register */
+#define UART_MSR 0x20 /* Modem Status Register */
+#define UART_CLK 0x28 /* Baud Rate Clock Divider */
+#define UART_MOD_CNTRL 0x100 /* Module Control */
+
+#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */
+#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */
+#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */
+#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */
+#define UART_FCR_TRIGGER_MASK 0xF0 /* Mask for the FIFO trigger range */
+#define UART_FCR_R_TRIGGER_1 0x00 /* Mask for receive trigger set at 1 */
+#define UART_FCR_R_TRIGGER_4 0x40 /* Mask for receive trigger set at 4 */
+#define UART_FCR_R_TRIGGER_8 0x80 /* Mask for receive trigger set at 8 */
+#define UART_FCR_R_TRIGGER_14 0xA0 /* Mask for receive trigger set at 14 */
+#define UART_FCR_T_TRIGGER_0 0x00 /* Mask for transmit trigger set at 0 */
+#define UART_FCR_T_TRIGGER_4 0x10 /* Mask for transmit trigger set at 4 */
+#define UART_FCR_T_TRIGGER_8 0x20 /* Mask for transmit trigger set at 8 */
+#define UART_FCR_T_TRIGGER_12 0x30 /* Mask for transmit trigger set at 12 */
+
+/*
+ * These are the definitions for the Line Control Register
+ */
+#define UART_LCR_SBC 0x40 /* Set break control */
+#define UART_LCR_SPAR 0x20 /* Stick parity (?) */
+#define UART_LCR_EPAR 0x10 /* Even parity select */
+#define UART_LCR_PARITY 0x08 /* Parity Enable */
+#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */
+#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */
+#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */
+#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */
+#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */
+
+/*
+ * These are the definitions for the Line Status Register
+ */
+#define UART_LSR_TEMT 0x40 /* Transmitter empty */
+#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */
+#define UART_LSR_BI 0x10 /* Break interrupt indicator */
+#define UART_LSR_FE 0x08 /* Frame error indicator */
+#define UART_LSR_PE 0x04 /* Parity error indicator */
+#define UART_LSR_OE 0x02 /* Overrun error indicator */
+#define UART_LSR_DR 0x01 /* Receiver data ready */
+
+/*
+ * These are the definitions for the Interrupt Identification Register
+ */
+#define UART_IIR_NO_INT 0x01 /* No interrupts pending */
+#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */
+#define UART_IIR_MSI 0x00 /* Modem status interrupt */
+#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */
+#define UART_IIR_RDI 0x04 /* Receiver data interrupt */
+#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */
+
+/*
+ * These are the definitions for the Interrupt Enable Register
+ */
+#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */
+#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */
+#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */
+#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */
+
+/*
+ * These are the definitions for the Modem Control Register
+ */
+#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */
+#define UART_MCR_OUT2 0x08 /* Out2 complement */
+#define UART_MCR_OUT1 0x04 /* Out1 complement */
+#define UART_MCR_RTS 0x02 /* RTS complement */
+#define UART_MCR_DTR 0x01 /* DTR complement */
+
+/*
+ * These are the definitions for the Modem Status Register
+ */
+#define UART_MSR_DCD 0x80 /* Data Carrier Detect */
+#define UART_MSR_RI 0x40 /* Ring Indicator */
+#define UART_MSR_DSR 0x20 /* Data Set Ready */
+#define UART_MSR_CTS 0x10 /* Clear to Send */
+#define UART_MSR_DDCD 0x08 /* Delta DCD */
+#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */
+#define UART_MSR_DDSR 0x02 /* Delta DSR */
+#define UART_MSR_DCTS 0x01 /* Delta CTS */
+#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */
+
+/* SSIO */
+#define SSI0_STATUS 0xB1600000
+# define SSI_STATUS_BF (1 << 4)
+# define SSI_STATUS_OF (1 << 3)
+# define SSI_STATUS_UF (1 << 2)
+# define SSI_STATUS_D (1 << 1)
+# define SSI_STATUS_B (1 << 0)
+#define SSI0_INT 0xB1600004
+# define SSI_INT_OI (1 << 3)
+# define SSI_INT_UI (1 << 2)
+# define SSI_INT_DI (1 << 1)
+#define SSI0_INT_ENABLE 0xB1600008
+# define SSI_INTE_OIE (1 << 3)
+# define SSI_INTE_UIE (1 << 2)
+# define SSI_INTE_DIE (1 << 1)
+#define SSI0_CONFIG 0xB1600020
+# define SSI_CONFIG_AO (1 << 24)
+# define SSI_CONFIG_DO (1 << 23)
+# define SSI_CONFIG_ALEN_BIT 20
+# define SSI_CONFIG_ALEN_MASK (0x7 << 20)
+# define SSI_CONFIG_DLEN_BIT 16
+# define SSI_CONFIG_DLEN_MASK (0x7 << 16)
+# define SSI_CONFIG_DD (1 << 11)
+# define SSI_CONFIG_AD (1 << 10)
+# define SSI_CONFIG_BM_BIT 8
+# define SSI_CONFIG_BM_MASK (0x3 << 8)
+# define SSI_CONFIG_CE (1 << 7)
+# define SSI_CONFIG_DP (1 << 6)
+# define SSI_CONFIG_DL (1 << 5)
+# define SSI_CONFIG_EP (1 << 4)
+#define SSI0_ADATA 0xB1600024
+# define SSI_AD_D (1 << 24)
+# define SSI_AD_ADDR_BIT 16
+# define SSI_AD_ADDR_MASK (0xff << 16)
+# define SSI_AD_DATA_BIT 0
+# define SSI_AD_DATA_MASK (0xfff << 0)
+#define SSI0_CLKDIV 0xB1600028
+#define SSI0_CONTROL 0xB1600100
+# define SSI_CONTROL_CD (1 << 1)
+# define SSI_CONTROL_E (1 << 0)
+
+/* SSI1 */
+#define SSI1_STATUS 0xB1680000
+#define SSI1_INT 0xB1680004
+#define SSI1_INT_ENABLE 0xB1680008
+#define SSI1_CONFIG 0xB1680020
+#define SSI1_ADATA 0xB1680024
+#define SSI1_CLKDIV 0xB1680028
+#define SSI1_ENABLE 0xB1680100
+
+/*
+ * Register content definitions
+ */
+#define SSI_STATUS_BF (1 << 4)
+#define SSI_STATUS_OF (1 << 3)
+#define SSI_STATUS_UF (1 << 2)
+#define SSI_STATUS_D (1 << 1)
+#define SSI_STATUS_B (1 << 0)
+
+/* SSI_INT */
+#define SSI_INT_OI (1 << 3)
+#define SSI_INT_UI (1 << 2)
+#define SSI_INT_DI (1 << 1)
+
+/* SSI_INTEN */
+#define SSI_INTEN_OIE (1 << 3)
+#define SSI_INTEN_UIE (1 << 2)
+#define SSI_INTEN_DIE (1 << 1)
+
+#define SSI_CONFIG_AO (1 << 24)
+#define SSI_CONFIG_DO (1 << 23)
+#define SSI_CONFIG_ALEN (7 << 20)
+#define SSI_CONFIG_DLEN (15 << 16)
+#define SSI_CONFIG_DD (1 << 11)
+#define SSI_CONFIG_AD (1 << 10)
+#define SSI_CONFIG_BM (3 << 8)
+#define SSI_CONFIG_CE (1 << 7)
+#define SSI_CONFIG_DP (1 << 6)
+#define SSI_CONFIG_DL (1 << 5)
+#define SSI_CONFIG_EP (1 << 4)
+#define SSI_CONFIG_ALEN_N(N) ((N-1) << 20)
+#define SSI_CONFIG_DLEN_N(N) ((N-1) << 16)
+#define SSI_CONFIG_BM_HI (0 << 8)
+#define SSI_CONFIG_BM_LO (1 << 8)
+#define SSI_CONFIG_BM_CY (2 << 8)
+
+#define SSI_ADATA_D (1 << 24)
+#define SSI_ADATA_ADDR (0xFF << 16)
+#define SSI_ADATA_DATA 0x0FFF
+#define SSI_ADATA_ADDR_N(N) (N << 16)
+
+#define SSI_ENABLE_CD (1 << 1)
+#define SSI_ENABLE_E (1 << 0)
+
+/* IrDA Controller */
+#define IRDA_BASE 0xB0300000
+#define IR_RING_PTR_STATUS (IRDA_BASE + 0x00)
+#define IR_RING_BASE_ADDR_H (IRDA_BASE + 0x04)
+#define IR_RING_BASE_ADDR_L (IRDA_BASE + 0x08)
+#define IR_RING_SIZE (IRDA_BASE + 0x0C)
+#define IR_RING_PROMPT (IRDA_BASE + 0x10)
+#define IR_RING_ADDR_CMPR (IRDA_BASE + 0x14)
+#define IR_INT_CLEAR (IRDA_BASE + 0x18)
+#define IR_CONFIG_1 (IRDA_BASE + 0x20)
+# define IR_RX_INVERT_LED (1 << 0)
+# define IR_TX_INVERT_LED (1 << 1)
+# define IR_ST (1 << 2)
+# define IR_SF (1 << 3)
+# define IR_SIR (1 << 4)
+# define IR_MIR (1 << 5)
+# define IR_FIR (1 << 6)
+# define IR_16CRC (1 << 7)
+# define IR_TD (1 << 8)
+# define IR_RX_ALL (1 << 9)
+# define IR_DMA_ENABLE (1 << 10)
+# define IR_RX_ENABLE (1 << 11)
+# define IR_TX_ENABLE (1 << 12)
+# define IR_LOOPBACK (1 << 14)
+# define IR_SIR_MODE (IR_SIR | IR_DMA_ENABLE | \
+ IR_RX_ALL | IR_RX_ENABLE | IR_SF | IR_16CRC)
+#define IR_SIR_FLAGS (IRDA_BASE + 0x24)
+#define IR_ENABLE (IRDA_BASE + 0x28)
+# define IR_RX_STATUS (1 << 9)
+# define IR_TX_STATUS (1 << 10)
+#define IR_READ_PHY_CONFIG (IRDA_BASE + 0x2C)
+#define IR_WRITE_PHY_CONFIG (IRDA_BASE + 0x30)
+#define IR_MAX_PKT_LEN (IRDA_BASE + 0x34)
+#define IR_RX_BYTE_CNT (IRDA_BASE + 0x38)
+#define IR_CONFIG_2 (IRDA_BASE + 0x3C)
+# define IR_MODE_INV (1 << 0)
+# define IR_ONE_PIN (1 << 1)
+#define IR_INTERFACE_CONFIG (IRDA_BASE + 0x40)
+
+/* GPIO */
+#define SYS_PINFUNC 0xB190002C
+# define SYS_PF_USB (1 << 15) /* 2nd USB device/host */
+# define SYS_PF_U3 (1 << 14) /* GPIO23/U3TXD */
+# define SYS_PF_U2 (1 << 13) /* GPIO22/U2TXD */
+# define SYS_PF_U1 (1 << 12) /* GPIO21/U1TXD */
+# define SYS_PF_SRC (1 << 11) /* GPIO6/SROMCKE */
+# define SYS_PF_CK5 (1 << 10) /* GPIO3/CLK5 */
+# define SYS_PF_CK4 (1 << 9) /* GPIO2/CLK4 */
+# define SYS_PF_IRF (1 << 8) /* GPIO15/IRFIRSEL */
+# define SYS_PF_UR3 (1 << 7) /* GPIO[14:9]/UART3 */
+# define SYS_PF_I2D (1 << 6) /* GPIO8/I2SDI */
+# define SYS_PF_I2S (1 << 5) /* I2S/GPIO[29:31] */
+# define SYS_PF_NI2 (1 << 4) /* NI2/GPIO[24:28] */
+# define SYS_PF_U0 (1 << 3) /* U0TXD/GPIO20 */
+# define SYS_PF_RD (1 << 2) /* IRTXD/GPIO19 */
+# define SYS_PF_A97 (1 << 1) /* AC97/SSL1 */
+# define SYS_PF_S0 (1 << 0) /* SSI_0/GPIO[16:18] */
+
+/* Au1100 only */
+# define SYS_PF_PC (1 << 18) /* PCMCIA/GPIO[207:204] */
+# define SYS_PF_LCD (1 << 17) /* extern lcd/GPIO[203:200] */
+# define SYS_PF_CS (1 << 16) /* EXTCLK0/32KHz to gpio2 */
+# define SYS_PF_EX0 (1 << 9) /* GPIO2/clock */
+
+/* Au1550 only. Redefines lots of pins */
+# define SYS_PF_PSC2_MASK (7 << 17)
+# define SYS_PF_PSC2_AC97 0
+# define SYS_PF_PSC2_SPI 0
+# define SYS_PF_PSC2_I2S (1 << 17)
+# define SYS_PF_PSC2_SMBUS (3 << 17)
+# define SYS_PF_PSC2_GPIO (7 << 17)
+# define SYS_PF_PSC3_MASK (7 << 20)
+# define SYS_PF_PSC3_AC97 0
+# define SYS_PF_PSC3_SPI 0
+# define SYS_PF_PSC3_I2S (1 << 20)
+# define SYS_PF_PSC3_SMBUS (3 << 20)
+# define SYS_PF_PSC3_GPIO (7 << 20)
+# define SYS_PF_PSC1_S1 (1 << 1)
+# define SYS_PF_MUST_BE_SET ((1 << 5) | (1 << 2))
+
+/* Au1200 only */
+#ifdef CONFIG_SOC_AU1200
+#define SYS_PINFUNC_DMA (1 << 31)
+#define SYS_PINFUNC_S0A (1 << 30)
+#define SYS_PINFUNC_S1A (1 << 29)
+#define SYS_PINFUNC_LP0 (1 << 28)
+#define SYS_PINFUNC_LP1 (1 << 27)
+#define SYS_PINFUNC_LD16 (1 << 26)
+#define SYS_PINFUNC_LD8 (1 << 25)
+#define SYS_PINFUNC_LD1 (1 << 24)
+#define SYS_PINFUNC_LD0 (1 << 23)
+#define SYS_PINFUNC_P1A (3 << 21)
+#define SYS_PINFUNC_P1B (1 << 20)
+#define SYS_PINFUNC_FS3 (1 << 19)
+#define SYS_PINFUNC_P0A (3 << 17)
+#define SYS_PINFUNC_CS (1 << 16)
+#define SYS_PINFUNC_CIM (1 << 15)
+#define SYS_PINFUNC_P1C (1 << 14)
+#define SYS_PINFUNC_U1T (1 << 12)
+#define SYS_PINFUNC_U1R (1 << 11)
+#define SYS_PINFUNC_EX1 (1 << 10)
+#define SYS_PINFUNC_EX0 (1 << 9)
+#define SYS_PINFUNC_U0R (1 << 8)
+#define SYS_PINFUNC_MC (1 << 7)
+#define SYS_PINFUNC_S0B (1 << 6)
+#define SYS_PINFUNC_S0C (1 << 5)
+#define SYS_PINFUNC_P0B (1 << 4)
+#define SYS_PINFUNC_U0T (1 << 3)
+#define SYS_PINFUNC_S1B (1 << 2)
+#endif
+
+#define SYS_TRIOUTRD 0xB1900100
+#define SYS_TRIOUTCLR 0xB1900100
+#define SYS_OUTPUTRD 0xB1900108
+#define SYS_OUTPUTSET 0xB1900108
+#define SYS_OUTPUTCLR 0xB190010C
+#define SYS_PINSTATERD 0xB1900110
+#define SYS_PININPUTEN 0xB1900110
+
+/* GPIO2, Au1500, Au1550 only */
+#define GPIO2_BASE 0xB1700000
+#define GPIO2_DIR (GPIO2_BASE + 0)
+#define GPIO2_OUTPUT (GPIO2_BASE + 8)
+#define GPIO2_PINSTATE (GPIO2_BASE + 0xC)
+#define GPIO2_INTENABLE (GPIO2_BASE + 0x10)
+#define GPIO2_ENABLE (GPIO2_BASE + 0x14)
+
+/* Power Management */
+#define SYS_SCRATCH0 0xB1900018
+#define SYS_SCRATCH1 0xB190001C
+#define SYS_WAKEMSK 0xB1900034
+#define SYS_ENDIAN 0xB1900038
+#define SYS_POWERCTRL 0xB190003C
+#define SYS_WAKESRC 0xB190005C
+#define SYS_SLPPWR 0xB1900078
+#define SYS_SLEEP 0xB190007C
+
+/* Clock Controller */
+#define SYS_FREQCTRL0 0xB1900020
+# define SYS_FC_FRDIV2_BIT 22
+# define SYS_FC_FRDIV2_MASK (0xff << SYS_FC_FRDIV2_BIT)
+# define SYS_FC_FE2 (1 << 21)
+# define SYS_FC_FS2 (1 << 20)
+# define SYS_FC_FRDIV1_BIT 12
+# define SYS_FC_FRDIV1_MASK (0xff << SYS_FC_FRDIV1_BIT)
+# define SYS_FC_FE1 (1 << 11)
+# define SYS_FC_FS1 (1 << 10)
+# define SYS_FC_FRDIV0_BIT 2
+# define SYS_FC_FRDIV0_MASK (0xff << SYS_FC_FRDIV0_BIT)
+# define SYS_FC_FE0 (1 << 1)
+# define SYS_FC_FS0 (1 << 0)
+#define SYS_FREQCTRL1 0xB1900024
+# define SYS_FC_FRDIV5_BIT 22
+# define SYS_FC_FRDIV5_MASK (0xff << SYS_FC_FRDIV5_BIT)
+# define SYS_FC_FE5 (1 << 21)
+# define SYS_FC_FS5 (1 << 20)
+# define SYS_FC_FRDIV4_BIT 12
+# define SYS_FC_FRDIV4_MASK (0xff << SYS_FC_FRDIV4_BIT)
+# define SYS_FC_FE4 (1 << 11)
+# define SYS_FC_FS4 (1 << 10)
+# define SYS_FC_FRDIV3_BIT 2
+# define SYS_FC_FRDIV3_MASK (0xff << SYS_FC_FRDIV3_BIT)
+# define SYS_FC_FE3 (1 << 1)
+# define SYS_FC_FS3 (1 << 0)
+#define SYS_CLKSRC 0xB1900028
+# define SYS_CS_ME1_BIT 27
+# define SYS_CS_ME1_MASK (0x7 << SYS_CS_ME1_BIT)
+# define SYS_CS_DE1 (1 << 26)
+# define SYS_CS_CE1 (1 << 25)
+# define SYS_CS_ME0_BIT 22
+# define SYS_CS_ME0_MASK (0x7 << SYS_CS_ME0_BIT)
+# define SYS_CS_DE0 (1 << 21)
+# define SYS_CS_CE0 (1 << 20)
+# define SYS_CS_MI2_BIT 17
+# define SYS_CS_MI2_MASK (0x7 << SYS_CS_MI2_BIT)
+# define SYS_CS_DI2 (1 << 16)
+# define SYS_CS_CI2 (1 << 15)
+#ifdef CONFIG_SOC_AU1100
+# define SYS_CS_ML_BIT 7
+# define SYS_CS_ML_MASK (0x7 << SYS_CS_ML_BIT)
+# define SYS_CS_DL (1 << 6)
+# define SYS_CS_CL (1 << 5)
+#else
+# define SYS_CS_MUH_BIT 12
+# define SYS_CS_MUH_MASK (0x7 << SYS_CS_MUH_BIT)
+# define SYS_CS_DUH (1 << 11)
+# define SYS_CS_CUH (1 << 10)
+# define SYS_CS_MUD_BIT 7
+# define SYS_CS_MUD_MASK (0x7 << SYS_CS_MUD_BIT)
+# define SYS_CS_DUD (1 << 6)
+# define SYS_CS_CUD (1 << 5)
+#endif
+# define SYS_CS_MIR_BIT 2
+# define SYS_CS_MIR_MASK (0x7 << SYS_CS_MIR_BIT)
+# define SYS_CS_DIR (1 << 1)
+# define SYS_CS_CIR (1 << 0)
+
+# define SYS_CS_MUX_AUX 0x1
+# define SYS_CS_MUX_FQ0 0x2
+# define SYS_CS_MUX_FQ1 0x3
+# define SYS_CS_MUX_FQ2 0x4
+# define SYS_CS_MUX_FQ3 0x5
+# define SYS_CS_MUX_FQ4 0x6
+# define SYS_CS_MUX_FQ5 0x7
+#define SYS_CPUPLL 0xB1900060
+#define SYS_AUXPLL 0xB1900064
+
+/* AC97 Controller */
+#define AC97C_CONFIG 0xB0000000
+# define AC97C_RECV_SLOTS_BIT 13
+# define AC97C_RECV_SLOTS_MASK (0x3ff << AC97C_RECV_SLOTS_BIT)
+# define AC97C_XMIT_SLOTS_BIT 3
+# define AC97C_XMIT_SLOTS_MASK (0x3ff << AC97C_XMIT_SLOTS_BIT)
+# define AC97C_SG (1 << 2)
+# define AC97C_SYNC (1 << 1)
+# define AC97C_RESET (1 << 0)
+#define AC97C_STATUS 0xB0000004
+# define AC97C_XU (1 << 11)
+# define AC97C_XO (1 << 10)
+# define AC97C_RU (1 << 9)
+# define AC97C_RO (1 << 8)
+# define AC97C_READY (1 << 7)
+# define AC97C_CP (1 << 6)
+# define AC97C_TR (1 << 5)
+# define AC97C_TE (1 << 4)
+# define AC97C_TF (1 << 3)
+# define AC97C_RR (1 << 2)
+# define AC97C_RE (1 << 1)
+# define AC97C_RF (1 << 0)
+#define AC97C_DATA 0xB0000008
+#define AC97C_CMD 0xB000000C
+# define AC97C_WD_BIT 16
+# define AC97C_READ (1 << 7)
+# define AC97C_INDEX_MASK 0x7f
+#define AC97C_CNTRL 0xB0000010
+# define AC97C_RS (1 << 1)
+# define AC97C_CE (1 << 0)
+
+/* Secure Digital (SD) Controller */
+#define SD0_XMIT_FIFO 0xB0600000
+#define SD0_RECV_FIFO 0xB0600004
+#define SD1_XMIT_FIFO 0xB0680000
+#define SD1_RECV_FIFO 0xB0680004
+
+#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
+/* Au1500 PCI Controller */
+#define Au1500_CFG_BASE 0xB4005000 /* virtual, KSEG1 addr */
+#define Au1500_PCI_CMEM (Au1500_CFG_BASE + 0)
+#define Au1500_PCI_CFG (Au1500_CFG_BASE + 4)
+# define PCI_ERROR ((1 << 22) | (1 << 23) | (1 << 24) | \
+ (1 << 25) | (1 << 26) | (1 << 27))
+#define Au1500_PCI_B2BMASK_CCH (Au1500_CFG_BASE + 8)
+#define Au1500_PCI_B2B0_VID (Au1500_CFG_BASE + 0xC)
+#define Au1500_PCI_B2B1_ID (Au1500_CFG_BASE + 0x10)
+#define Au1500_PCI_MWMASK_DEV (Au1500_CFG_BASE + 0x14)
+#define Au1500_PCI_MWBASE_REV_CCL (Au1500_CFG_BASE + 0x18)
+#define Au1500_PCI_ERR_ADDR (Au1500_CFG_BASE + 0x1C)
+#define Au1500_PCI_SPEC_INTACK (Au1500_CFG_BASE + 0x20)
+#define Au1500_PCI_ID (Au1500_CFG_BASE + 0x100)
+#define Au1500_PCI_STATCMD (Au1500_CFG_BASE + 0x104)
+#define Au1500_PCI_CLASSREV (Au1500_CFG_BASE + 0x108)
+#define Au1500_PCI_HDRTYPE (Au1500_CFG_BASE + 0x10C)
+#define Au1500_PCI_MBAR (Au1500_CFG_BASE + 0x110)
+
+#define Au1500_PCI_HDR 0xB4005100 /* virtual, KSEG1 addr */
+
+/*
+ * All of our structures, like PCI resource, have 32-bit members.
+ * Drivers are expected to do an ioremap on the PCI MEM resource, but it's
+ * hard to store 0x4 0000 0000 in a 32-bit type. We require a small patch
+ * to __ioremap to check for addresses between (u32)Au1500_PCI_MEM_START and
+ * (u32)Au1500_PCI_MEM_END and change those to the full 36-bit PCI MEM
+ * addresses. For PCI I/O, it's simpler because we get to do the ioremap
+ * ourselves and then adjust the device's resources.
+ */
+#define Au1500_EXT_CFG 0x600000000ULL
+#define Au1500_EXT_CFG_TYPE1 0x680000000ULL
+#define Au1500_PCI_IO_START 0x500000000ULL
+#define Au1500_PCI_IO_END 0x5000FFFFFULL
+#define Au1500_PCI_MEM_START 0x440000000ULL
+#define Au1500_PCI_MEM_END 0x44FFFFFFFULL
+
+#define PCI_IO_START 0x00001000
+#define PCI_IO_END 0x000FFFFF
+#define PCI_MEM_START 0x40000000
+#define PCI_MEM_END 0x4FFFFFFF
+
+#define PCI_FIRST_DEVFN (0 << 3)
+#define PCI_LAST_DEVFN (19 << 3)
+
+#define IOPORT_RESOURCE_START 0x00001000 /* skip legacy probing */
+#define IOPORT_RESOURCE_END 0xffffffff
+#define IOMEM_RESOURCE_START 0x10000000
+#define IOMEM_RESOURCE_END 0xffffffff
+
+#else /* Au1000 and Au1100 and Au1200 */
+
+/* Don't allow any legacy ports probing */
+#define IOPORT_RESOURCE_START 0x10000000
+#define IOPORT_RESOURCE_END 0xffffffff
+#define IOMEM_RESOURCE_START 0x10000000
+#define IOMEM_RESOURCE_END 0xffffffff
+
+#define PCI_IO_START 0
+#define PCI_IO_END 0
+#define PCI_MEM_START 0
+#define PCI_MEM_END 0
+#define PCI_FIRST_DEVFN 0
+#define PCI_LAST_DEVFN 0
+
+#endif
+
+#ifndef _LANGUAGE_ASSEMBLY
+typedef volatile struct {
+ /* 0x0000 */ u32 toytrim;
+ /* 0x0004 */ u32 toywrite;
+ /* 0x0008 */ u32 toymatch0;
+ /* 0x000C */ u32 toymatch1;
+ /* 0x0010 */ u32 toymatch2;
+ /* 0x0014 */ u32 cntrctrl;
+ /* 0x0018 */ u32 scratch0;
+ /* 0x001C */ u32 scratch1;
+ /* 0x0020 */ u32 freqctrl0;
+ /* 0x0024 */ u32 freqctrl1;
+ /* 0x0028 */ u32 clksrc;
+ /* 0x002C */ u32 pinfunc;
+ /* 0x0030 */ u32 reserved0;
+ /* 0x0034 */ u32 wakemsk;
+ /* 0x0038 */ u32 endian;
+ /* 0x003C */ u32 powerctrl;
+ /* 0x0040 */ u32 toyread;
+ /* 0x0044 */ u32 rtctrim;
+ /* 0x0048 */ u32 rtcwrite;
+ /* 0x004C */ u32 rtcmatch0;
+ /* 0x0050 */ u32 rtcmatch1;
+ /* 0x0054 */ u32 rtcmatch2;
+ /* 0x0058 */ u32 rtcread;
+ /* 0x005C */ u32 wakesrc;
+ /* 0x0060 */ u32 cpupll;
+ /* 0x0064 */ u32 auxpll;
+ /* 0x0068 */ u32 reserved1;
+ /* 0x006C */ u32 reserved2;
+ /* 0x0070 */ u32 reserved3;
+ /* 0x0074 */ u32 reserved4;
+ /* 0x0078 */ u32 slppwr;
+ /* 0x007C */ u32 sleep;
+ /* 0x0080 */ u32 reserved5[32];
+ /* 0x0100 */ u32 trioutrd;
+#define trioutclr trioutrd
+ /* 0x0104 */ u32 reserved6;
+ /* 0x0108 */ u32 outputrd;
+#define outputset outputrd
+ /* 0x010C */ u32 outputclr;
+ /* 0x0110 */ u32 pinstaterd;
+#define pininputen pinstaterd
+} AU1X00_SYS;
+
+static AU1X00_SYS * const sys = (AU1X00_SYS *)SYS_BASE;
+
+#endif
+
+/*
+ * Processor information based on PRID.
+ * Copied from PowerPC.
+ */
+#ifndef _LANGUAGE_ASSEMBLY
+struct cpu_spec {
+ /* CPU is matched via (PRID & prid_mask) == prid_value */
+ unsigned int prid_mask;
+ unsigned int prid_value;
+
+ char *cpu_name;
+ unsigned char cpu_od; /* Set Config[OD] */
+ unsigned char cpu_bclk; /* Enable BCLK switching */
+ unsigned char cpu_pll_wo; /* sys_cpupll reg. write-only */
+};
+
+extern struct cpu_spec cpu_specs[];
+extern struct cpu_spec *cur_cpu_spec[];
+#endif
+
+#endif
diff --git a/arch/mips/include/asm/mach-au1x00/au1000_dma.h b/arch/mips/include/asm/mach-au1x00/au1000_dma.h
new file mode 100644
index 00000000000..c333b4e1cd4
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1000_dma.h
@@ -0,0 +1,458 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ * Defines for using and allocating DMA channels on the Alchemy
+ * Au1x00 MIPS processors.
+ *
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#ifndef __ASM_AU1000_DMA_H
+#define __ASM_AU1000_DMA_H
+
+#include <linux/io.h> /* need byte IO */
+#include <linux/spinlock.h> /* And spinlocks */
+#include <linux/delay.h>
+#include <asm/system.h>
+
+#define NUM_AU1000_DMA_CHANNELS 8
+
+/* DMA Channel Base Addresses */
+#define DMA_CHANNEL_BASE 0xB4002000
+#define DMA_CHANNEL_LEN 0x00000100
+
+/* DMA Channel Register Offsets */
+#define DMA_MODE_SET 0x00000000
+#define DMA_MODE_READ DMA_MODE_SET
+#define DMA_MODE_CLEAR 0x00000004
+/* DMA Mode register bits follow */
+#define DMA_DAH_MASK (0x0f << 20)
+#define DMA_DID_BIT 16
+#define DMA_DID_MASK (0x0f << DMA_DID_BIT)
+#define DMA_DS (1 << 15)
+#define DMA_BE (1 << 13)
+#define DMA_DR (1 << 12)
+#define DMA_TS8 (1 << 11)
+#define DMA_DW_BIT 9
+#define DMA_DW_MASK (0x03 << DMA_DW_BIT)
+#define DMA_DW8 (0 << DMA_DW_BIT)
+#define DMA_DW16 (1 << DMA_DW_BIT)
+#define DMA_DW32 (2 << DMA_DW_BIT)
+#define DMA_NC (1 << 8)
+#define DMA_IE (1 << 7)
+#define DMA_HALT (1 << 6)
+#define DMA_GO (1 << 5)
+#define DMA_AB (1 << 4)
+#define DMA_D1 (1 << 3)
+#define DMA_BE1 (1 << 2)
+#define DMA_D0 (1 << 1)
+#define DMA_BE0 (1 << 0)
+
+#define DMA_PERIPHERAL_ADDR 0x00000008
+#define DMA_BUFFER0_START 0x0000000C
+#define DMA_BUFFER1_START 0x00000014
+#define DMA_BUFFER0_COUNT 0x00000010
+#define DMA_BUFFER1_COUNT 0x00000018
+#define DMA_BAH_BIT 16
+#define DMA_BAH_MASK (0x0f << DMA_BAH_BIT)
+#define DMA_COUNT_BIT 0
+#define DMA_COUNT_MASK (0xffff << DMA_COUNT_BIT)
+
+/* DMA Device IDs follow */
+enum {
+ DMA_ID_UART0_TX = 0,
+ DMA_ID_UART0_RX,
+ DMA_ID_GP04,
+ DMA_ID_GP05,
+ DMA_ID_AC97C_TX,
+ DMA_ID_AC97C_RX,
+ DMA_ID_UART3_TX,
+ DMA_ID_UART3_RX,
+ DMA_ID_USBDEV_EP0_RX,
+ DMA_ID_USBDEV_EP0_TX,
+ DMA_ID_USBDEV_EP2_TX,
+ DMA_ID_USBDEV_EP3_TX,
+ DMA_ID_USBDEV_EP4_RX,
+ DMA_ID_USBDEV_EP5_RX,
+ DMA_ID_I2S_TX,
+ DMA_ID_I2S_RX,
+ DMA_NUM_DEV
+};
+
+/* DMA Device ID's for 2nd bank (AU1100) follow */
+enum {
+ DMA_ID_SD0_TX = 0,
+ DMA_ID_SD0_RX,
+ DMA_ID_SD1_TX,
+ DMA_ID_SD1_RX,
+ DMA_NUM_DEV_BANK2
+};
+
+struct dma_chan {
+ int dev_id; /* this channel is allocated if >= 0, */
+ /* free otherwise */
+ unsigned int io;
+ const char *dev_str;
+ int irq;
+ void *irq_dev;
+ unsigned int fifo_addr;
+ unsigned int mode;
+};
+
+/* These are in arch/mips/au1000/common/dma.c */
+extern struct dma_chan au1000_dma_table[];
+extern int request_au1000_dma(int dev_id,
+ const char *dev_str,
+ irq_handler_t irqhandler,
+ unsigned long irqflags,
+ void *irq_dev_id);
+extern void free_au1000_dma(unsigned int dmanr);
+extern int au1000_dma_read_proc(char *buf, char **start, off_t fpos,
+ int length, int *eof, void *data);
+extern void dump_au1000_dma_channel(unsigned int dmanr);
+extern spinlock_t au1000_dma_spin_lock;
+
+static inline struct dma_chan *get_dma_chan(unsigned int dmanr)
+{
+ if (dmanr >= NUM_AU1000_DMA_CHANNELS ||
+ au1000_dma_table[dmanr].dev_id < 0)
+ return NULL;
+ return &au1000_dma_table[dmanr];
+}
+
+static inline unsigned long claim_dma_lock(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&au1000_dma_spin_lock, flags);
+ return flags;
+}
+
+static inline void release_dma_lock(unsigned long flags)
+{
+ spin_unlock_irqrestore(&au1000_dma_spin_lock, flags);
+}
+
+/*
+ * Set the DMA buffer enable bits in the mode register.
+ */
+static inline void enable_dma_buffer0(unsigned int dmanr)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return;
+ au_writel(DMA_BE0, chan->io + DMA_MODE_SET);
+}
+
+static inline void enable_dma_buffer1(unsigned int dmanr)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return;
+ au_writel(DMA_BE1, chan->io + DMA_MODE_SET);
+}
+static inline void enable_dma_buffers(unsigned int dmanr)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return;
+ au_writel(DMA_BE0 | DMA_BE1, chan->io + DMA_MODE_SET);
+}
+
+static inline void start_dma(unsigned int dmanr)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return;
+ au_writel(DMA_GO, chan->io + DMA_MODE_SET);
+}
+
+#define DMA_HALT_POLL 0x5000
+
+static inline void halt_dma(unsigned int dmanr)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+ int i;
+
+ if (!chan)
+ return;
+ au_writel(DMA_GO, chan->io + DMA_MODE_CLEAR);
+
+ /* Poll the halt bit */
+ for (i = 0; i < DMA_HALT_POLL; i++)
+ if (au_readl(chan->io + DMA_MODE_READ) & DMA_HALT)
+ break;
+ if (i == DMA_HALT_POLL)
+ printk(KERN_INFO "halt_dma: HALT poll expired!\n");
+}
+
+static inline void disable_dma(unsigned int dmanr)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return;
+
+ halt_dma(dmanr);
+
+ /* Now we can disable the buffers */
+ au_writel(~DMA_GO, chan->io + DMA_MODE_CLEAR);
+}
+
+static inline int dma_halted(unsigned int dmanr)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return 1;
+ return (au_readl(chan->io + DMA_MODE_READ) & DMA_HALT) ? 1 : 0;
+}
+
+/* Initialize a DMA channel. */
+static inline void init_dma(unsigned int dmanr)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+ u32 mode;
+
+ if (!chan)
+ return;
+
+ disable_dma(dmanr);
+
+ /* Set device FIFO address */
+ au_writel(CPHYSADDR(chan->fifo_addr), chan->io + DMA_PERIPHERAL_ADDR);
+
+ mode = chan->mode | (chan->dev_id << DMA_DID_BIT);
+ if (chan->irq)
+ mode |= DMA_IE;
+
+ au_writel(~mode, chan->io + DMA_MODE_CLEAR);
+ au_writel(mode, chan->io + DMA_MODE_SET);
+}
+
+/*
+ * Set mode for a specific DMA channel
+ */
+static inline void set_dma_mode(unsigned int dmanr, unsigned int mode)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return;
+ /*
+ * set_dma_mode is only allowed to change endianess, direction,
+ * transfer size, device FIFO width, and coherency settings.
+ * Make sure anything else is masked off.
+ */
+ mode &= (DMA_BE | DMA_DR | DMA_TS8 | DMA_DW_MASK | DMA_NC);
+ chan->mode &= ~(DMA_BE | DMA_DR | DMA_TS8 | DMA_DW_MASK | DMA_NC);
+ chan->mode |= mode;
+}
+
+static inline unsigned int get_dma_mode(unsigned int dmanr)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return 0;
+ return chan->mode;
+}
+
+static inline int get_dma_active_buffer(unsigned int dmanr)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return -1;
+ return (au_readl(chan->io + DMA_MODE_READ) & DMA_AB) ? 1 : 0;
+}
+
+/*
+ * Set the device FIFO address for a specific DMA channel - only
+ * applicable to GPO4 and GPO5. All the other devices have fixed
+ * FIFO addresses.
+ */
+static inline void set_dma_fifo_addr(unsigned int dmanr, unsigned int a)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return;
+
+ if (chan->mode & DMA_DS) /* second bank of device IDs */
+ return;
+
+ if (chan->dev_id != DMA_ID_GP04 && chan->dev_id != DMA_ID_GP05)
+ return;
+
+ au_writel(CPHYSADDR(a), chan->io + DMA_PERIPHERAL_ADDR);
+}
+
+/*
+ * Clear the DMA buffer done bits in the mode register.
+ */
+static inline void clear_dma_done0(unsigned int dmanr)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return;
+ au_writel(DMA_D0, chan->io + DMA_MODE_CLEAR);
+}
+
+static inline void clear_dma_done1(unsigned int dmanr)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return;
+ au_writel(DMA_D1, chan->io + DMA_MODE_CLEAR);
+}
+
+/*
+ * This does nothing - not applicable to Au1000 DMA.
+ */
+static inline void set_dma_page(unsigned int dmanr, char pagenr)
+{
+}
+
+/*
+ * Set Buffer 0 transfer address for specific DMA channel.
+ */
+static inline void set_dma_addr0(unsigned int dmanr, unsigned int a)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return;
+ au_writel(a, chan->io + DMA_BUFFER0_START);
+}
+
+/*
+ * Set Buffer 1 transfer address for specific DMA channel.
+ */
+static inline void set_dma_addr1(unsigned int dmanr, unsigned int a)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return;
+ au_writel(a, chan->io + DMA_BUFFER1_START);
+}
+
+
+/*
+ * Set Buffer 0 transfer size (max 64k) for a specific DMA channel.
+ */
+static inline void set_dma_count0(unsigned int dmanr, unsigned int count)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return;
+ count &= DMA_COUNT_MASK;
+ au_writel(count, chan->io + DMA_BUFFER0_COUNT);
+}
+
+/*
+ * Set Buffer 1 transfer size (max 64k) for a specific DMA channel.
+ */
+static inline void set_dma_count1(unsigned int dmanr, unsigned int count)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return;
+ count &= DMA_COUNT_MASK;
+ au_writel(count, chan->io + DMA_BUFFER1_COUNT);
+}
+
+/*
+ * Set both buffer transfer sizes (max 64k) for a specific DMA channel.
+ */
+static inline void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return;
+ count &= DMA_COUNT_MASK;
+ au_writel(count, chan->io + DMA_BUFFER0_COUNT);
+ au_writel(count, chan->io + DMA_BUFFER1_COUNT);
+}
+
+/*
+ * Returns which buffer has its done bit set in the mode register.
+ * Returns -1 if neither or both done bits set.
+ */
+static inline unsigned int get_dma_buffer_done(unsigned int dmanr)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return 0;
+ return au_readl(chan->io + DMA_MODE_READ) & (DMA_D0 | DMA_D1);
+}
+
+
+/*
+ * Returns the DMA channel's Buffer Done IRQ number.
+ */
+static inline int get_dma_done_irq(unsigned int dmanr)
+{
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return -1;
+ return chan->irq;
+}
+
+/*
+ * Get DMA residue count. Returns the number of _bytes_ left to transfer.
+ */
+static inline int get_dma_residue(unsigned int dmanr)
+{
+ int curBufCntReg, count;
+ struct dma_chan *chan = get_dma_chan(dmanr);
+
+ if (!chan)
+ return 0;
+
+ curBufCntReg = (au_readl(chan->io + DMA_MODE_READ) & DMA_AB) ?
+ DMA_BUFFER1_COUNT : DMA_BUFFER0_COUNT;
+
+ count = au_readl(chan->io + curBufCntReg) & DMA_COUNT_MASK;
+
+ if ((chan->mode & DMA_DW_MASK) == DMA_DW16)
+ count <<= 1;
+ else if ((chan->mode & DMA_DW_MASK) == DMA_DW32)
+ count <<= 2;
+
+ return count;
+}
+
+#endif /* __ASM_AU1000_DMA_H */
diff --git a/arch/mips/include/asm/mach-au1x00/au1000_gpio.h b/arch/mips/include/asm/mach-au1x00/au1000_gpio.h
new file mode 100644
index 00000000000..d8c96fda554
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1000_gpio.h
@@ -0,0 +1,56 @@
+/*
+ * FILE NAME au1000_gpio.h
+ *
+ * BRIEF MODULE DESCRIPTION
+ * API to Alchemy Au1xx0 GPIO device.
+ *
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ * Steve Longerbeam
+ *
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __AU1000_GPIO_H
+#define __AU1000_GPIO_H
+
+#include <linux/ioctl.h>
+
+#define AU1000GPIO_IOC_MAGIC 'A'
+
+#define AU1000GPIO_IN _IOR(AU1000GPIO_IOC_MAGIC, 0, int)
+#define AU1000GPIO_SET _IOW(AU1000GPIO_IOC_MAGIC, 1, int)
+#define AU1000GPIO_CLEAR _IOW(AU1000GPIO_IOC_MAGIC, 2, int)
+#define AU1000GPIO_OUT _IOW(AU1000GPIO_IOC_MAGIC, 3, int)
+#define AU1000GPIO_TRISTATE _IOW(AU1000GPIO_IOC_MAGIC, 4, int)
+#define AU1000GPIO_AVAIL_MASK _IOR(AU1000GPIO_IOC_MAGIC, 5, int)
+
+#ifdef __KERNEL__
+extern u32 get_au1000_avail_gpio_mask(void);
+extern int au1000gpio_tristate(u32 data);
+extern int au1000gpio_in(u32 *data);
+extern int au1000gpio_set(u32 data);
+extern int au1000gpio_clear(u32 data);
+extern int au1000gpio_out(u32 data);
+#endif
+
+#endif
diff --git a/arch/mips/include/asm/mach-au1x00/au1100_mmc.h b/arch/mips/include/asm/mach-au1x00/au1100_mmc.h
new file mode 100644
index 00000000000..c35e2091849
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1100_mmc.h
@@ -0,0 +1,208 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ * Defines for using the MMC/SD controllers on the
+ * Alchemy Au1100 mips processor.
+ *
+ * Copyright (c) 2003 Embedded Edge, LLC.
+ * Author: Embedded Edge, LLC.
+ * dan@embeddededge.com or tim@embeddededge.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+/*
+ * AU1100 MMC/SD definitions.
+ *
+ * From "AMD Alchemy Solutions Au1100 Processor Data Book - Preliminary"
+ * June, 2003
+ */
+
+#ifndef __ASM_AU1100_MMC_H
+#define __ASM_AU1100_MMC_H
+
+#include <linux/leds.h>
+
+struct au1xmmc_platform_data {
+ int(*cd_setup)(void *mmc_host, int on);
+ int(*card_inserted)(void *mmc_host);
+ int(*card_readonly)(void *mmc_host);
+ void(*set_power)(void *mmc_host, int state);
+ struct led_classdev *led;
+};
+
+#define SD0_BASE 0xB0600000
+#define SD1_BASE 0xB0680000
+
+
+/*
+ * Register offsets.
+ */
+#define SD_TXPORT (0x0000)
+#define SD_RXPORT (0x0004)
+#define SD_CONFIG (0x0008)
+#define SD_ENABLE (0x000C)
+#define SD_CONFIG2 (0x0010)
+#define SD_BLKSIZE (0x0014)
+#define SD_STATUS (0x0018)
+#define SD_DEBUG (0x001C)
+#define SD_CMD (0x0020)
+#define SD_CMDARG (0x0024)
+#define SD_RESP3 (0x0028)
+#define SD_RESP2 (0x002C)
+#define SD_RESP1 (0x0030)
+#define SD_RESP0 (0x0034)
+#define SD_TIMEOUT (0x0038)
+
+
+/*
+ * SD_TXPORT bit definitions.
+ */
+#define SD_TXPORT_TXD (0x000000ff)
+
+
+/*
+ * SD_RXPORT bit definitions.
+ */
+#define SD_RXPORT_RXD (0x000000ff)
+
+
+/*
+ * SD_CONFIG bit definitions.
+ */
+#define SD_CONFIG_DIV (0x000001ff)
+#define SD_CONFIG_DE (0x00000200)
+#define SD_CONFIG_NE (0x00000400)
+#define SD_CONFIG_TU (0x00000800)
+#define SD_CONFIG_TO (0x00001000)
+#define SD_CONFIG_RU (0x00002000)
+#define SD_CONFIG_RO (0x00004000)
+#define SD_CONFIG_I (0x00008000)
+#define SD_CONFIG_CR (0x00010000)
+#define SD_CONFIG_RAT (0x00020000)
+#define SD_CONFIG_DD (0x00040000)
+#define SD_CONFIG_DT (0x00080000)
+#define SD_CONFIG_SC (0x00100000)
+#define SD_CONFIG_RC (0x00200000)
+#define SD_CONFIG_WC (0x00400000)
+#define SD_CONFIG_xxx (0x00800000)
+#define SD_CONFIG_TH (0x01000000)
+#define SD_CONFIG_TE (0x02000000)
+#define SD_CONFIG_TA (0x04000000)
+#define SD_CONFIG_RH (0x08000000)
+#define SD_CONFIG_RA (0x10000000)
+#define SD_CONFIG_RF (0x20000000)
+#define SD_CONFIG_CD (0x40000000)
+#define SD_CONFIG_SI (0x80000000)
+
+
+/*
+ * SD_ENABLE bit definitions.
+ */
+#define SD_ENABLE_CE (0x00000001)
+#define SD_ENABLE_R (0x00000002)
+
+
+/*
+ * SD_CONFIG2 bit definitions.
+ */
+#define SD_CONFIG2_EN (0x00000001)
+#define SD_CONFIG2_FF (0x00000002)
+#define SD_CONFIG2_xx1 (0x00000004)
+#define SD_CONFIG2_DF (0x00000008)
+#define SD_CONFIG2_DC (0x00000010)
+#define SD_CONFIG2_xx2 (0x000000e0)
+#define SD_CONFIG2_WB (0x00000100)
+#define SD_CONFIG2_RW (0x00000200)
+
+
+/*
+ * SD_BLKSIZE bit definitions.
+ */
+#define SD_BLKSIZE_BS (0x000007ff)
+#define SD_BLKSIZE_BS_SHIFT (0)
+#define SD_BLKSIZE_BC (0x01ff0000)
+#define SD_BLKSIZE_BC_SHIFT (16)
+
+
+/*
+ * SD_STATUS bit definitions.
+ */
+#define SD_STATUS_DCRCW (0x00000007)
+#define SD_STATUS_xx1 (0x00000008)
+#define SD_STATUS_CB (0x00000010)
+#define SD_STATUS_DB (0x00000020)
+#define SD_STATUS_CF (0x00000040)
+#define SD_STATUS_D3 (0x00000080)
+#define SD_STATUS_xx2 (0x00000300)
+#define SD_STATUS_NE (0x00000400)
+#define SD_STATUS_TU (0x00000800)
+#define SD_STATUS_TO (0x00001000)
+#define SD_STATUS_RU (0x00002000)
+#define SD_STATUS_RO (0x00004000)
+#define SD_STATUS_I (0x00008000)
+#define SD_STATUS_CR (0x00010000)
+#define SD_STATUS_RAT (0x00020000)
+#define SD_STATUS_DD (0x00040000)
+#define SD_STATUS_DT (0x00080000)
+#define SD_STATUS_SC (0x00100000)
+#define SD_STATUS_RC (0x00200000)
+#define SD_STATUS_WC (0x00400000)
+#define SD_STATUS_xx3 (0x00800000)
+#define SD_STATUS_TH (0x01000000)
+#define SD_STATUS_TE (0x02000000)
+#define SD_STATUS_TA (0x04000000)
+#define SD_STATUS_RH (0x08000000)
+#define SD_STATUS_RA (0x10000000)
+#define SD_STATUS_RF (0x20000000)
+#define SD_STATUS_CD (0x40000000)
+#define SD_STATUS_SI (0x80000000)
+
+
+/*
+ * SD_CMD bit definitions.
+ */
+#define SD_CMD_GO (0x00000001)
+#define SD_CMD_RY (0x00000002)
+#define SD_CMD_xx1 (0x0000000c)
+#define SD_CMD_CT_MASK (0x000000f0)
+#define SD_CMD_CT_0 (0x00000000)
+#define SD_CMD_CT_1 (0x00000010)
+#define SD_CMD_CT_2 (0x00000020)
+#define SD_CMD_CT_3 (0x00000030)
+#define SD_CMD_CT_4 (0x00000040)
+#define SD_CMD_CT_5 (0x00000050)
+#define SD_CMD_CT_6 (0x00000060)
+#define SD_CMD_CT_7 (0x00000070)
+#define SD_CMD_CI (0x0000ff00)
+#define SD_CMD_CI_SHIFT (8)
+#define SD_CMD_RT_MASK (0x00ff0000)
+#define SD_CMD_RT_0 (0x00000000)
+#define SD_CMD_RT_1 (0x00010000)
+#define SD_CMD_RT_2 (0x00020000)
+#define SD_CMD_RT_3 (0x00030000)
+#define SD_CMD_RT_4 (0x00040000)
+#define SD_CMD_RT_5 (0x00050000)
+#define SD_CMD_RT_6 (0x00060000)
+#define SD_CMD_RT_1B (0x00810000)
+
+
+#endif /* __ASM_AU1100_MMC_H */
+
diff --git a/arch/mips/include/asm/mach-au1x00/au1550_spi.h b/arch/mips/include/asm/mach-au1x00/au1550_spi.h
new file mode 100644
index 00000000000..08e1958e941
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1550_spi.h
@@ -0,0 +1,15 @@
+/*
+ * au1550_spi.h - Au1550 PSC SPI controller driver - platform data structure
+ */
+
+#ifndef _AU1550_SPI_H_
+#define _AU1550_SPI_H_
+
+struct au1550_spi_info {
+ u32 mainclk_hz; /* main input clock frequency of PSC */
+ u16 num_chipselect; /* number of chipselects supported */
+ void (*activate_cs)(struct au1550_spi_info *spi, int cs, int polarity);
+ void (*deactivate_cs)(struct au1550_spi_info *spi, int cs, int polarity);
+};
+
+#endif
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx.h b/arch/mips/include/asm/mach-au1x00/au1xxx.h
new file mode 100644
index 00000000000..1b3655090ed
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx.h
@@ -0,0 +1,43 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _AU1XXX_H_
+#define _AU1XXX_H_
+
+#include <asm/mach-au1x00/au1000.h>
+
+#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || \
+ defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550)
+#include <asm/mach-db1x00/db1x00.h>
+
+#elif defined(CONFIG_MIPS_PB1550)
+#include <asm/mach-pb1x00/pb1550.h>
+
+#elif defined(CONFIG_MIPS_PB1200)
+#include <asm/mach-pb1x00/pb1200.h>
+
+#elif defined(CONFIG_MIPS_DB1200)
+#include <asm/mach-db1x00/db1200.h>
+
+#endif
+
+#endif /* _AU1XXX_H_ */
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
new file mode 100644
index 00000000000..44a67bf05dc
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
@@ -0,0 +1,386 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * Include file for Alchemy Semiconductor's Au1550 Descriptor
+ * Based DMA Controller.
+ *
+ * Copyright 2004 Embedded Edge, LLC
+ * dan@embeddededge.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * Specifics for the Au1xxx Descriptor-Based DMA Controller,
+ * first seen in the AU1550 part.
+ */
+#ifndef _AU1000_DBDMA_H_
+#define _AU1000_DBDMA_H_
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+/*
+ * The DMA base addresses.
+ * The channels are every 256 bytes (0x0100) from the channel 0 base.
+ * Interrupt status/enable is bits 15:0 for channels 15 to zero.
+ */
+#define DDMA_GLOBAL_BASE 0xb4003000
+#define DDMA_CHANNEL_BASE 0xb4002000
+
+typedef volatile struct dbdma_global {
+ u32 ddma_config;
+ u32 ddma_intstat;
+ u32 ddma_throttle;
+ u32 ddma_inten;
+} dbdma_global_t;
+
+/* General Configuration. */
+#define DDMA_CONFIG_AF (1 << 2)
+#define DDMA_CONFIG_AH (1 << 1)
+#define DDMA_CONFIG_AL (1 << 0)
+
+#define DDMA_THROTTLE_EN (1 << 31)
+
+/* The structure of a DMA Channel. */
+typedef volatile struct au1xxx_dma_channel {
+ u32 ddma_cfg; /* See below */
+ u32 ddma_desptr; /* 32-byte aligned pointer to descriptor */
+ u32 ddma_statptr; /* word aligned pointer to status word */
+ u32 ddma_dbell; /* A write activates channel operation */
+ u32 ddma_irq; /* If bit 0 set, interrupt pending */
+ u32 ddma_stat; /* See below */
+ u32 ddma_bytecnt; /* Byte count, valid only when chan idle */
+ /* Remainder, up to the 256 byte boundary, is reserved. */
+} au1x_dma_chan_t;
+
+#define DDMA_CFG_SED (1 << 9) /* source DMA level/edge detect */
+#define DDMA_CFG_SP (1 << 8) /* source DMA polarity */
+#define DDMA_CFG_DED (1 << 7) /* destination DMA level/edge detect */
+#define DDMA_CFG_DP (1 << 6) /* destination DMA polarity */
+#define DDMA_CFG_SYNC (1 << 5) /* Sync static bus controller */
+#define DDMA_CFG_PPR (1 << 4) /* PCI posted read/write control */
+#define DDMA_CFG_DFN (1 << 3) /* Descriptor fetch non-coherent */
+#define DDMA_CFG_SBE (1 << 2) /* Source big endian */
+#define DDMA_CFG_DBE (1 << 1) /* Destination big endian */
+#define DDMA_CFG_EN (1 << 0) /* Channel enable */
+
+/*
+ * Always set when descriptor processing done, regardless of
+ * interrupt enable state. Reflected in global intstat, don't
+ * clear this until global intstat is read/used.
+ */
+#define DDMA_IRQ_IN (1 << 0)
+
+#define DDMA_STAT_DB (1 << 2) /* Doorbell pushed */
+#define DDMA_STAT_V (1 << 1) /* Descriptor valid */
+#define DDMA_STAT_H (1 << 0) /* Channel Halted */
+
+/*
+ * "Standard" DDMA Descriptor.
+ * Must be 32-byte aligned.
+ */
+typedef volatile struct au1xxx_ddma_desc {
+ u32 dscr_cmd0; /* See below */
+ u32 dscr_cmd1; /* See below */
+ u32 dscr_source0; /* source phys address */
+ u32 dscr_source1; /* See below */
+ u32 dscr_dest0; /* Destination address */
+ u32 dscr_dest1; /* See below */
+ u32 dscr_stat; /* completion status */
+ u32 dscr_nxtptr; /* Next descriptor pointer (mostly) */
+ /*
+ * First 32 bytes are HW specific!!!
+ * Lets have some SW data following -- make sure it's 32 bytes.
+ */
+ u32 sw_status;
+ u32 sw_context;
+ u32 sw_reserved[6];
+} au1x_ddma_desc_t;
+
+#define DSCR_CMD0_V (1 << 31) /* Descriptor valid */
+#define DSCR_CMD0_MEM (1 << 30) /* mem-mem transfer */
+#define DSCR_CMD0_SID_MASK (0x1f << 25) /* Source ID */
+#define DSCR_CMD0_DID_MASK (0x1f << 20) /* Destination ID */
+#define DSCR_CMD0_SW_MASK (0x3 << 18) /* Source Width */
+#define DSCR_CMD0_DW_MASK (0x3 << 16) /* Destination Width */
+#define DSCR_CMD0_ARB (0x1 << 15) /* Set for Hi Pri */
+#define DSCR_CMD0_DT_MASK (0x3 << 13) /* Descriptor Type */
+#define DSCR_CMD0_SN (0x1 << 12) /* Source non-coherent */
+#define DSCR_CMD0_DN (0x1 << 11) /* Destination non-coherent */
+#define DSCR_CMD0_SM (0x1 << 10) /* Stride mode */
+#define DSCR_CMD0_IE (0x1 << 8) /* Interrupt Enable */
+#define DSCR_CMD0_SP (0x1 << 4) /* Status pointer select */
+#define DSCR_CMD0_CV (0x1 << 2) /* Clear Valid when done */
+#define DSCR_CMD0_ST_MASK (0x3 << 0) /* Status instruction */
+
+#define SW_STATUS_INUSE (1 << 0)
+
+/* Command 0 device IDs. */
+#ifdef CONFIG_SOC_AU1550
+#define DSCR_CMD0_UART0_TX 0
+#define DSCR_CMD0_UART0_RX 1
+#define DSCR_CMD0_UART3_TX 2
+#define DSCR_CMD0_UART3_RX 3
+#define DSCR_CMD0_DMA_REQ0 4
+#define DSCR_CMD0_DMA_REQ1 5
+#define DSCR_CMD0_DMA_REQ2 6
+#define DSCR_CMD0_DMA_REQ3 7
+#define DSCR_CMD0_USBDEV_RX0 8
+#define DSCR_CMD0_USBDEV_TX0 9
+#define DSCR_CMD0_USBDEV_TX1 10
+#define DSCR_CMD0_USBDEV_TX2 11
+#define DSCR_CMD0_USBDEV_RX3 12
+#define DSCR_CMD0_USBDEV_RX4 13
+#define DSCR_CMD0_PSC0_TX 14
+#define DSCR_CMD0_PSC0_RX 15
+#define DSCR_CMD0_PSC1_TX 16
+#define DSCR_CMD0_PSC1_RX 17
+#define DSCR_CMD0_PSC2_TX 18
+#define DSCR_CMD0_PSC2_RX 19
+#define DSCR_CMD0_PSC3_TX 20
+#define DSCR_CMD0_PSC3_RX 21
+#define DSCR_CMD0_PCI_WRITE 22
+#define DSCR_CMD0_NAND_FLASH 23
+#define DSCR_CMD0_MAC0_RX 24
+#define DSCR_CMD0_MAC0_TX 25
+#define DSCR_CMD0_MAC1_RX 26
+#define DSCR_CMD0_MAC1_TX 27
+#endif /* CONFIG_SOC_AU1550 */
+
+#ifdef CONFIG_SOC_AU1200
+#define DSCR_CMD0_UART0_TX 0
+#define DSCR_CMD0_UART0_RX 1
+#define DSCR_CMD0_UART1_TX 2
+#define DSCR_CMD0_UART1_RX 3
+#define DSCR_CMD0_DMA_REQ0 4
+#define DSCR_CMD0_DMA_REQ1 5
+#define DSCR_CMD0_MAE_BE 6
+#define DSCR_CMD0_MAE_FE 7
+#define DSCR_CMD0_SDMS_TX0 8
+#define DSCR_CMD0_SDMS_RX0 9
+#define DSCR_CMD0_SDMS_TX1 10
+#define DSCR_CMD0_SDMS_RX1 11
+#define DSCR_CMD0_AES_TX 13
+#define DSCR_CMD0_AES_RX 12
+#define DSCR_CMD0_PSC0_TX 14
+#define DSCR_CMD0_PSC0_RX 15
+#define DSCR_CMD0_PSC1_TX 16
+#define DSCR_CMD0_PSC1_RX 17
+#define DSCR_CMD0_CIM_RXA 18
+#define DSCR_CMD0_CIM_RXB 19
+#define DSCR_CMD0_CIM_RXC 20
+#define DSCR_CMD0_MAE_BOTH 21
+#define DSCR_CMD0_LCD 22
+#define DSCR_CMD0_NAND_FLASH 23
+#define DSCR_CMD0_PSC0_SYNC 24
+#define DSCR_CMD0_PSC1_SYNC 25
+#define DSCR_CMD0_CIM_SYNC 26
+#endif /* CONFIG_SOC_AU1200 */
+
+#define DSCR_CMD0_THROTTLE 30
+#define DSCR_CMD0_ALWAYS 31
+#define DSCR_NDEV_IDS 32
+/* This macro is used to find/create custom device types */
+#define DSCR_DEV2CUSTOM_ID(x, d) (((((x) & 0xFFFF) << 8) | 0x32000000) | \
+ ((d) & 0xFF))
+#define DSCR_CUSTOM2DEV_ID(x) ((x) & 0xFF)
+
+#define DSCR_CMD0_SID(x) (((x) & 0x1f) << 25)
+#define DSCR_CMD0_DID(x) (((x) & 0x1f) << 20)
+
+/* Source/Destination transfer width. */
+#define DSCR_CMD0_BYTE 0
+#define DSCR_CMD0_HALFWORD 1
+#define DSCR_CMD0_WORD 2
+
+#define DSCR_CMD0_SW(x) (((x) & 0x3) << 18)
+#define DSCR_CMD0_DW(x) (((x) & 0x3) << 16)
+
+/* DDMA Descriptor Type. */
+#define DSCR_CMD0_STANDARD 0
+#define DSCR_CMD0_LITERAL 1
+#define DSCR_CMD0_CMP_BRANCH 2
+
+#define DSCR_CMD0_DT(x) (((x) & 0x3) << 13)
+
+/* Status Instruction. */
+#define DSCR_CMD0_ST_NOCHANGE 0 /* Don't change */
+#define DSCR_CMD0_ST_CURRENT 1 /* Write current status */
+#define DSCR_CMD0_ST_CMD0 2 /* Write cmd0 with V cleared */
+#define DSCR_CMD0_ST_BYTECNT 3 /* Write remaining byte count */
+
+#define DSCR_CMD0_ST(x) (((x) & 0x3) << 0)
+
+/* Descriptor Command 1. */
+#define DSCR_CMD1_SUPTR_MASK (0xf << 28) /* upper 4 bits of src addr */
+#define DSCR_CMD1_DUPTR_MASK (0xf << 24) /* upper 4 bits of dest addr */
+#define DSCR_CMD1_FL_MASK (0x3 << 22) /* Flag bits */
+#define DSCR_CMD1_BC_MASK (0x3fffff) /* Byte count */
+
+/* Flag description. */
+#define DSCR_CMD1_FL_MEM_STRIDE0 0
+#define DSCR_CMD1_FL_MEM_STRIDE1 1
+#define DSCR_CMD1_FL_MEM_STRIDE2 2
+
+#define DSCR_CMD1_FL(x) (((x) & 0x3) << 22)
+
+/* Source1, 1-dimensional stride. */
+#define DSCR_SRC1_STS_MASK (3 << 30) /* Src xfer size */
+#define DSCR_SRC1_SAM_MASK (3 << 28) /* Src xfer movement */
+#define DSCR_SRC1_SB_MASK (0x3fff << 14) /* Block size */
+#define DSCR_SRC1_SB(x) (((x) & 0x3fff) << 14)
+#define DSCR_SRC1_SS_MASK (0x3fff << 0) /* Stride */
+#define DSCR_SRC1_SS(x) (((x) & 0x3fff) << 0)
+
+/* Dest1, 1-dimensional stride. */
+#define DSCR_DEST1_DTS_MASK (3 << 30) /* Dest xfer size */
+#define DSCR_DEST1_DAM_MASK (3 << 28) /* Dest xfer movement */
+#define DSCR_DEST1_DB_MASK (0x3fff << 14) /* Block size */
+#define DSCR_DEST1_DB(x) (((x) & 0x3fff) << 14)
+#define DSCR_DEST1_DS_MASK (0x3fff << 0) /* Stride */
+#define DSCR_DEST1_DS(x) (((x) & 0x3fff) << 0)
+
+#define DSCR_xTS_SIZE1 0
+#define DSCR_xTS_SIZE2 1
+#define DSCR_xTS_SIZE4 2
+#define DSCR_xTS_SIZE8 3
+#define DSCR_SRC1_STS(x) (((x) & 3) << 30)
+#define DSCR_DEST1_DTS(x) (((x) & 3) << 30)
+
+#define DSCR_xAM_INCREMENT 0
+#define DSCR_xAM_DECREMENT 1
+#define DSCR_xAM_STATIC 2
+#define DSCR_xAM_BURST 3
+#define DSCR_SRC1_SAM(x) (((x) & 3) << 28)
+#define DSCR_DEST1_DAM(x) (((x) & 3) << 28)
+
+/* The next descriptor pointer. */
+#define DSCR_NXTPTR_MASK (0x07ffffff)
+#define DSCR_NXTPTR(x) ((x) >> 5)
+#define DSCR_GET_NXTPTR(x) ((x) << 5)
+#define DSCR_NXTPTR_MS (1 << 27)
+
+/* The number of DBDMA channels. */
+#define NUM_DBDMA_CHANS 16
+
+/*
+ * DDMA API definitions
+ * FIXME: may not fit to this header file
+ */
+typedef struct dbdma_device_table {
+ u32 dev_id;
+ u32 dev_flags;
+ u32 dev_tsize;
+ u32 dev_devwidth;
+ u32 dev_physaddr; /* If FIFO */
+ u32 dev_intlevel;
+ u32 dev_intpolarity;
+} dbdev_tab_t;
+
+
+typedef struct dbdma_chan_config {
+ spinlock_t lock;
+
+ u32 chan_flags;
+ u32 chan_index;
+ dbdev_tab_t *chan_src;
+ dbdev_tab_t *chan_dest;
+ au1x_dma_chan_t *chan_ptr;
+ au1x_ddma_desc_t *chan_desc_base;
+ au1x_ddma_desc_t *get_ptr, *put_ptr, *cur_ptr;
+ void *chan_callparam;
+ void (*chan_callback)(int, void *);
+} chan_tab_t;
+
+#define DEV_FLAGS_INUSE (1 << 0)
+#define DEV_FLAGS_ANYUSE (1 << 1)
+#define DEV_FLAGS_OUT (1 << 2)
+#define DEV_FLAGS_IN (1 << 3)
+#define DEV_FLAGS_BURSTABLE (1 << 4)
+#define DEV_FLAGS_SYNC (1 << 5)
+/* end DDMA API definitions */
+
+/*
+ * External functions for drivers to use.
+ * Use this to allocate a DBDMA channel. The device IDs are one of
+ * the DSCR_CMD0 devices IDs, which is usually redefined to a more
+ * meaningful name. The 'callback' is called during DMA completion
+ * interrupt.
+ */
+extern u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
+ void (*callback)(int, void *),
+ void *callparam);
+
+#define DBDMA_MEM_CHAN DSCR_CMD0_ALWAYS
+
+/* Set the device width of an in/out FIFO. */
+u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits);
+
+/* Allocate a ring of descriptors for DBDMA. */
+u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries);
+
+/* Put buffers on source/destination descriptors. */
+u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags);
+u32 _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags);
+
+/* Get a buffer from the destination descriptor. */
+u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes);
+
+void au1xxx_dbdma_stop(u32 chanid);
+void au1xxx_dbdma_start(u32 chanid);
+void au1xxx_dbdma_reset(u32 chanid);
+u32 au1xxx_get_dma_residue(u32 chanid);
+
+void au1xxx_dbdma_chan_free(u32 chanid);
+void au1xxx_dbdma_dump(u32 chanid);
+
+u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr);
+
+u32 au1xxx_ddma_add_device(dbdev_tab_t *dev);
+extern void au1xxx_ddma_del_device(u32 devid);
+void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp);
+
+/*
+ * Some compatibilty macros -- needed to make changes to API
+ * without breaking existing drivers.
+ */
+#define au1xxx_dbdma_put_source(chanid, buf, nbytes) \
+ _au1xxx_dbdma_put_source(chanid, buf, nbytes, DDMA_FLAGS_IE)
+#define au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags) \
+ _au1xxx_dbdma_put_source(chanid, buf, nbytes, flags)
+#define put_source_flags(chanid, buf, nbytes, flags) \
+ au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags)
+
+#define au1xxx_dbdma_put_dest(chanid, buf, nbytes) \
+ _au1xxx_dbdma_put_dest(chanid, buf, nbytes, DDMA_FLAGS_IE)
+#define au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags) \
+ _au1xxx_dbdma_put_dest(chanid, buf, nbytes, flags)
+#define put_dest_flags(chanid, buf, nbytes, flags) \
+ au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags)
+
+/*
+ * Flags for the put_source/put_dest functions.
+ */
+#define DDMA_FLAGS_IE (1 << 0)
+#define DDMA_FLAGS_NOIE (1 << 1)
+
+#endif /* _LANGUAGE_ASSEMBLY */
+#endif /* _AU1000_DBDMA_H_ */
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
new file mode 100644
index 00000000000..60638b8969b
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
@@ -0,0 +1,194 @@
+/*
+ * include/asm-mips/mach-au1x00/au1xxx_ide.h version 01.30.00 Aug. 02 2005
+ *
+ * BRIEF MODULE DESCRIPTION
+ * AMD Alchemy Au1xxx IDE interface routines over the Static Bus
+ *
+ * Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option) any later
+ * version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+ * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
+ * Interface and Linux Device Driver" Application Note.
+ */
+
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+#define DMA_WAIT_TIMEOUT 100
+#define NUM_DESCRIPTORS PRD_ENTRIES
+#else /* CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA */
+#define NUM_DESCRIPTORS 2
+#endif
+
+#ifndef AU1XXX_ATA_RQSIZE
+#define AU1XXX_ATA_RQSIZE 128
+#endif
+
+/* Disable Burstable-Support for DBDMA */
+#ifndef CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON
+#define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON 0
+#endif
+
+#ifdef CONFIG_PM
+/*
+ * This will enable the device to be powered up when write() or read()
+ * is called. If this is not defined, the driver will return -EBUSY.
+ */
+#define WAKE_ON_ACCESS 1
+
+typedef struct {
+ spinlock_t lock; /* Used to block on state transitions */
+ au1xxx_power_dev_t *dev; /* Power Managers device structure */
+ unsigned stopped; /* Used to signal device is stopped */
+} pm_state;
+#endif
+
+typedef struct {
+ u32 tx_dev_id, rx_dev_id, target_dev_id;
+ u32 tx_chan, rx_chan;
+ void *tx_desc_head, *rx_desc_head;
+ ide_hwif_t *hwif;
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+ ide_drive_t *drive;
+ struct dbdma_cmd *dma_table_cpu;
+ dma_addr_t dma_table_dma;
+#endif
+ int irq;
+ u32 regbase;
+#ifdef CONFIG_PM
+ pm_state pm;
+#endif
+} _auide_hwif;
+
+/******************************************************************************/
+/* PIO Mode timing calculation : */
+/* */
+/* Static Bus Spec ATA Spec */
+/* Tcsoe = t1 */
+/* Toecs = t9 */
+/* Twcs = t9 */
+/* Tcsh = t2i | t2 */
+/* Tcsoff = t2i | t2 */
+/* Twp = t2 */
+/* Tcsw = t1 */
+/* Tpm = 0 */
+/* Ta = t1+t2 */
+/******************************************************************************/
+
+#define TCSOE_MASK (0x07 << 29)
+#define TOECS_MASK (0x07 << 26)
+#define TWCS_MASK (0x07 << 28)
+#define TCSH_MASK (0x0F << 24)
+#define TCSOFF_MASK (0x07 << 20)
+#define TWP_MASK (0x3F << 14)
+#define TCSW_MASK (0x0F << 10)
+#define TPM_MASK (0x0F << 6)
+#define TA_MASK (0x3F << 0)
+#define TS_MASK (1 << 8)
+
+/* Timing parameters PIO mode 0 */
+#define SBC_IDE_PIO0_TCSOE (0x04 << 29)
+#define SBC_IDE_PIO0_TOECS (0x01 << 26)
+#define SBC_IDE_PIO0_TWCS (0x02 << 28)
+#define SBC_IDE_PIO0_TCSH (0x08 << 24)
+#define SBC_IDE_PIO0_TCSOFF (0x07 << 20)
+#define SBC_IDE_PIO0_TWP (0x10 << 14)
+#define SBC_IDE_PIO0_TCSW (0x04 << 10)
+#define SBC_IDE_PIO0_TPM (0x00 << 6)
+#define SBC_IDE_PIO0_TA (0x15 << 0)
+/* Timing parameters PIO mode 1 */
+#define SBC_IDE_PIO1_TCSOE (0x03 << 29)
+#define SBC_IDE_PIO1_TOECS (0x01 << 26)
+#define SBC_IDE_PIO1_TWCS (0x01 << 28)
+#define SBC_IDE_PIO1_TCSH (0x06 << 24)
+#define SBC_IDE_PIO1_TCSOFF (0x06 << 20)
+#define SBC_IDE_PIO1_TWP (0x08 << 14)
+#define SBC_IDE_PIO1_TCSW (0x03 << 10)
+#define SBC_IDE_PIO1_TPM (0x00 << 6)
+#define SBC_IDE_PIO1_TA (0x0B << 0)
+/* Timing parameters PIO mode 2 */
+#define SBC_IDE_PIO2_TCSOE (0x05 << 29)
+#define SBC_IDE_PIO2_TOECS (0x01 << 26)
+#define SBC_IDE_PIO2_TWCS (0x01 << 28)
+#define SBC_IDE_PIO2_TCSH (0x07 << 24)
+#define SBC_IDE_PIO2_TCSOFF (0x07 << 20)
+#define SBC_IDE_PIO2_TWP (0x1F << 14)
+#define SBC_IDE_PIO2_TCSW (0x05 << 10)
+#define SBC_IDE_PIO2_TPM (0x00 << 6)
+#define SBC_IDE_PIO2_TA (0x22 << 0)
+/* Timing parameters PIO mode 3 */
+#define SBC_IDE_PIO3_TCSOE (0x05 << 29)
+#define SBC_IDE_PIO3_TOECS (0x01 << 26)
+#define SBC_IDE_PIO3_TWCS (0x01 << 28)
+#define SBC_IDE_PIO3_TCSH (0x0D << 24)
+#define SBC_IDE_PIO3_TCSOFF (0x0D << 20)
+#define SBC_IDE_PIO3_TWP (0x15 << 14)
+#define SBC_IDE_PIO3_TCSW (0x05 << 10)
+#define SBC_IDE_PIO3_TPM (0x00 << 6)
+#define SBC_IDE_PIO3_TA (0x1A << 0)
+/* Timing parameters PIO mode 4 */
+#define SBC_IDE_PIO4_TCSOE (0x04 << 29)
+#define SBC_IDE_PIO4_TOECS (0x01 << 26)
+#define SBC_IDE_PIO4_TWCS (0x01 << 28)
+#define SBC_IDE_PIO4_TCSH (0x04 << 24)
+#define SBC_IDE_PIO4_TCSOFF (0x04 << 20)
+#define SBC_IDE_PIO4_TWP (0x0D << 14)
+#define SBC_IDE_PIO4_TCSW (0x03 << 10)
+#define SBC_IDE_PIO4_TPM (0x00 << 6)
+#define SBC_IDE_PIO4_TA (0x12 << 0)
+/* Timing parameters MDMA mode 0 */
+#define SBC_IDE_MDMA0_TCSOE (0x03 << 29)
+#define SBC_IDE_MDMA0_TOECS (0x01 << 26)
+#define SBC_IDE_MDMA0_TWCS (0x01 << 28)
+#define SBC_IDE_MDMA0_TCSH (0x07 << 24)
+#define SBC_IDE_MDMA0_TCSOFF (0x07 << 20)
+#define SBC_IDE_MDMA0_TWP (0x0C << 14)
+#define SBC_IDE_MDMA0_TCSW (0x03 << 10)
+#define SBC_IDE_MDMA0_TPM (0x00 << 6)
+#define SBC_IDE_MDMA0_TA (0x0F << 0)
+/* Timing parameters MDMA mode 1 */
+#define SBC_IDE_MDMA1_TCSOE (0x05 << 29)
+#define SBC_IDE_MDMA1_TOECS (0x01 << 26)
+#define SBC_IDE_MDMA1_TWCS (0x01 << 28)
+#define SBC_IDE_MDMA1_TCSH (0x05 << 24)
+#define SBC_IDE_MDMA1_TCSOFF (0x05 << 20)
+#define SBC_IDE_MDMA1_TWP (0x0F << 14)
+#define SBC_IDE_MDMA1_TCSW (0x05 << 10)
+#define SBC_IDE_MDMA1_TPM (0x00 << 6)
+#define SBC_IDE_MDMA1_TA (0x15 << 0)
+/* Timing parameters MDMA mode 2 */
+#define SBC_IDE_MDMA2_TCSOE (0x04 << 29)
+#define SBC_IDE_MDMA2_TOECS (0x01 << 26)
+#define SBC_IDE_MDMA2_TWCS (0x01 << 28)
+#define SBC_IDE_MDMA2_TCSH (0x04 << 24)
+#define SBC_IDE_MDMA2_TCSOFF (0x04 << 20)
+#define SBC_IDE_MDMA2_TWP (0x0D << 14)
+#define SBC_IDE_MDMA2_TCSW (0x04 << 10)
+#define SBC_IDE_MDMA2_TPM (0x00 << 6)
+#define SBC_IDE_MDMA2_TA (0x12 << 0)
+
+#define SBC_IDE_TIMING(mode) \
+ (SBC_IDE_##mode##_TWCS | \
+ SBC_IDE_##mode##_TCSH | \
+ SBC_IDE_##mode##_TCSOFF | \
+ SBC_IDE_##mode##_TWP | \
+ SBC_IDE_##mode##_TCSW | \
+ SBC_IDE_##mode##_TPM | \
+ SBC_IDE_##mode##_TA)
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h b/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h
new file mode 100644
index 00000000000..892b7f168eb
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h
@@ -0,0 +1,505 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * Include file for Alchemy Semiconductor's Au1k CPU.
+ *
+ * Copyright 2004 Embedded Edge, LLC
+ * dan@embeddededge.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Specifics for the Au1xxx Programmable Serial Controllers, first
+ * seen in the AU1550 part.
+ */
+#ifndef _AU1000_PSC_H_
+#define _AU1000_PSC_H_
+
+/* The PSC base addresses. */
+#ifdef CONFIG_SOC_AU1550
+#define PSC0_BASE_ADDR 0xb1a00000
+#define PSC1_BASE_ADDR 0xb1b00000
+#define PSC2_BASE_ADDR 0xb0a00000
+#define PSC3_BASE_ADDR 0xb0b00000
+#endif
+
+#ifdef CONFIG_SOC_AU1200
+#define PSC0_BASE_ADDR 0xb1a00000
+#define PSC1_BASE_ADDR 0xb1b00000
+#endif
+
+/*
+ * The PSC select and control registers are common to all protocols.
+ */
+#define PSC_SEL_OFFSET 0x00000000
+#define PSC_CTRL_OFFSET 0x00000004
+
+#define PSC_SEL_CLK_MASK (3 << 4)
+#define PSC_SEL_CLK_INTCLK (0 << 4)
+#define PSC_SEL_CLK_EXTCLK (1 << 4)
+#define PSC_SEL_CLK_SERCLK (2 << 4)
+
+#define PSC_SEL_PS_MASK 0x00000007
+#define PSC_SEL_PS_DISABLED 0
+#define PSC_SEL_PS_SPIMODE 2
+#define PSC_SEL_PS_I2SMODE 3
+#define PSC_SEL_PS_AC97MODE 4
+#define PSC_SEL_PS_SMBUSMODE 5
+
+#define PSC_CTRL_DISABLE 0
+#define PSC_CTRL_SUSPEND 2
+#define PSC_CTRL_ENABLE 3
+
+/* AC97 Registers. */
+#define PSC_AC97CFG_OFFSET 0x00000008
+#define PSC_AC97MSK_OFFSET 0x0000000c
+#define PSC_AC97PCR_OFFSET 0x00000010
+#define PSC_AC97STAT_OFFSET 0x00000014
+#define PSC_AC97EVNT_OFFSET 0x00000018
+#define PSC_AC97TXRX_OFFSET 0x0000001c
+#define PSC_AC97CDC_OFFSET 0x00000020
+#define PSC_AC97RST_OFFSET 0x00000024
+#define PSC_AC97GPO_OFFSET 0x00000028
+#define PSC_AC97GPI_OFFSET 0x0000002c
+
+#define AC97_PSC_SEL (AC97_PSC_BASE + PSC_SEL_OFFSET)
+#define AC97_PSC_CTRL (AC97_PSC_BASE + PSC_CTRL_OFFSET)
+#define PSC_AC97CFG (AC97_PSC_BASE + PSC_AC97CFG_OFFSET)
+#define PSC_AC97MSK (AC97_PSC_BASE + PSC_AC97MSK_OFFSET)
+#define PSC_AC97PCR (AC97_PSC_BASE + PSC_AC97PCR_OFFSET)
+#define PSC_AC97STAT (AC97_PSC_BASE + PSC_AC97STAT_OFFSET)
+#define PSC_AC97EVNT (AC97_PSC_BASE + PSC_AC97EVNT_OFFSET)
+#define PSC_AC97TXRX (AC97_PSC_BASE + PSC_AC97TXRX_OFFSET)
+#define PSC_AC97CDC (AC97_PSC_BASE + PSC_AC97CDC_OFFSET)
+#define PSC_AC97RST (AC97_PSC_BASE + PSC_AC97RST_OFFSET)
+#define PSC_AC97GPO (AC97_PSC_BASE + PSC_AC97GPO_OFFSET)
+#define PSC_AC97GPI (AC97_PSC_BASE + PSC_AC97GPI_OFFSET)
+
+/* AC97 Config Register. */
+#define PSC_AC97CFG_RT_MASK (3 << 30)
+#define PSC_AC97CFG_RT_FIFO1 (0 << 30)
+#define PSC_AC97CFG_RT_FIFO2 (1 << 30)
+#define PSC_AC97CFG_RT_FIFO4 (2 << 30)
+#define PSC_AC97CFG_RT_FIFO8 (3 << 30)
+
+#define PSC_AC97CFG_TT_MASK (3 << 28)
+#define PSC_AC97CFG_TT_FIFO1 (0 << 28)
+#define PSC_AC97CFG_TT_FIFO2 (1 << 28)
+#define PSC_AC97CFG_TT_FIFO4 (2 << 28)
+#define PSC_AC97CFG_TT_FIFO8 (3 << 28)
+
+#define PSC_AC97CFG_DD_DISABLE (1 << 27)
+#define PSC_AC97CFG_DE_ENABLE (1 << 26)
+#define PSC_AC97CFG_SE_ENABLE (1 << 25)
+
+#define PSC_AC97CFG_LEN_MASK (0xf << 21)
+#define PSC_AC97CFG_TXSLOT_MASK (0x3ff << 11)
+#define PSC_AC97CFG_RXSLOT_MASK (0x3ff << 1)
+#define PSC_AC97CFG_GE_ENABLE (1)
+
+/* Enable slots 3-12. */
+#define PSC_AC97CFG_TXSLOT_ENA(x) (1 << (((x) - 3) + 11))
+#define PSC_AC97CFG_RXSLOT_ENA(x) (1 << (((x) - 3) + 1))
+
+/*
+ * The word length equation is ((x) * 2) + 2, so choose 'x' appropriately.
+ * The only sensible numbers are 7, 9, or possibly 11. Nah, just do the
+ * arithmetic in the macro.
+ */
+#define PSC_AC97CFG_SET_LEN(x) (((((x) - 2) / 2) & 0xf) << 21)
+#define PSC_AC97CFG_GET_LEN(x) (((((x) >> 21) & 0xf) * 2) + 2)
+
+/* AC97 Mask Register. */
+#define PSC_AC97MSK_GR (1 << 25)
+#define PSC_AC97MSK_CD (1 << 24)
+#define PSC_AC97MSK_RR (1 << 13)
+#define PSC_AC97MSK_RO (1 << 12)
+#define PSC_AC97MSK_RU (1 << 11)
+#define PSC_AC97MSK_TR (1 << 10)
+#define PSC_AC97MSK_TO (1 << 9)
+#define PSC_AC97MSK_TU (1 << 8)
+#define PSC_AC97MSK_RD (1 << 5)
+#define PSC_AC97MSK_TD (1 << 4)
+#define PSC_AC97MSK_ALLMASK (PSC_AC97MSK_GR | PSC_AC97MSK_CD | \
+ PSC_AC97MSK_RR | PSC_AC97MSK_RO | \
+ PSC_AC97MSK_RU | PSC_AC97MSK_TR | \
+ PSC_AC97MSK_TO | PSC_AC97MSK_TU | \
+ PSC_AC97MSK_RD | PSC_AC97MSK_TD)
+
+/* AC97 Protocol Control Register. */
+#define PSC_AC97PCR_RC (1 << 6)
+#define PSC_AC97PCR_RP (1 << 5)
+#define PSC_AC97PCR_RS (1 << 4)
+#define PSC_AC97PCR_TC (1 << 2)
+#define PSC_AC97PCR_TP (1 << 1)
+#define PSC_AC97PCR_TS (1 << 0)
+
+/* AC97 Status register (read only). */
+#define PSC_AC97STAT_CB (1 << 26)
+#define PSC_AC97STAT_CP (1 << 25)
+#define PSC_AC97STAT_CR (1 << 24)
+#define PSC_AC97STAT_RF (1 << 13)
+#define PSC_AC97STAT_RE (1 << 12)
+#define PSC_AC97STAT_RR (1 << 11)
+#define PSC_AC97STAT_TF (1 << 10)
+#define PSC_AC97STAT_TE (1 << 9)
+#define PSC_AC97STAT_TR (1 << 8)
+#define PSC_AC97STAT_RB (1 << 5)
+#define PSC_AC97STAT_TB (1 << 4)
+#define PSC_AC97STAT_DI (1 << 2)
+#define PSC_AC97STAT_DR (1 << 1)
+#define PSC_AC97STAT_SR (1 << 0)
+
+/* AC97 Event Register. */
+#define PSC_AC97EVNT_GR (1 << 25)
+#define PSC_AC97EVNT_CD (1 << 24)
+#define PSC_AC97EVNT_RR (1 << 13)
+#define PSC_AC97EVNT_RO (1 << 12)
+#define PSC_AC97EVNT_RU (1 << 11)
+#define PSC_AC97EVNT_TR (1 << 10)
+#define PSC_AC97EVNT_TO (1 << 9)
+#define PSC_AC97EVNT_TU (1 << 8)
+#define PSC_AC97EVNT_RD (1 << 5)
+#define PSC_AC97EVNT_TD (1 << 4)
+
+/* CODEC Command Register. */
+#define PSC_AC97CDC_RD (1 << 25)
+#define PSC_AC97CDC_ID_MASK (3 << 23)
+#define PSC_AC97CDC_INDX_MASK (0x7f << 16)
+#define PSC_AC97CDC_ID(x) (((x) & 0x03) << 23)
+#define PSC_AC97CDC_INDX(x) (((x) & 0x7f) << 16)
+
+/* AC97 Reset Control Register. */
+#define PSC_AC97RST_RST (1 << 1)
+#define PSC_AC97RST_SNC (1 << 0)
+
+/* PSC in I2S Mode. */
+typedef struct psc_i2s {
+ u32 psc_sel;
+ u32 psc_ctrl;
+ u32 psc_i2scfg;
+ u32 psc_i2smsk;
+ u32 psc_i2spcr;
+ u32 psc_i2sstat;
+ u32 psc_i2sevent;
+ u32 psc_i2stxrx;
+ u32 psc_i2sudf;
+} psc_i2s_t;
+
+#define PSC_I2SCFG_OFFSET 0x08
+#define PSC_I2SMASK_OFFSET 0x0C
+#define PSC_I2SPCR_OFFSET 0x10
+#define PSC_I2SSTAT_OFFSET 0x14
+#define PSC_I2SEVENT_OFFSET 0x18
+#define PSC_I2SRXTX_OFFSET 0x1C
+#define PSC_I2SUDF_OFFSET 0x20
+
+/* I2S Config Register. */
+#define PSC_I2SCFG_RT_MASK (3 << 30)
+#define PSC_I2SCFG_RT_FIFO1 (0 << 30)
+#define PSC_I2SCFG_RT_FIFO2 (1 << 30)
+#define PSC_I2SCFG_RT_FIFO4 (2 << 30)
+#define PSC_I2SCFG_RT_FIFO8 (3 << 30)
+
+#define PSC_I2SCFG_TT_MASK (3 << 28)
+#define PSC_I2SCFG_TT_FIFO1 (0 << 28)
+#define PSC_I2SCFG_TT_FIFO2 (1 << 28)
+#define PSC_I2SCFG_TT_FIFO4 (2 << 28)
+#define PSC_I2SCFG_TT_FIFO8 (3 << 28)
+
+#define PSC_I2SCFG_DD_DISABLE (1 << 27)
+#define PSC_I2SCFG_DE_ENABLE (1 << 26)
+#define PSC_I2SCFG_SET_WS(x) (((((x) / 2) - 1) & 0x7f) << 16)
+#define PSC_I2SCFG_WS(n) ((n & 0xFF) << 16)
+#define PSC_I2SCFG_WS_MASK (PSC_I2SCFG_WS(0x3F))
+#define PSC_I2SCFG_WI (1 << 15)
+
+#define PSC_I2SCFG_DIV_MASK (3 << 13)
+#define PSC_I2SCFG_DIV2 (0 << 13)
+#define PSC_I2SCFG_DIV4 (1 << 13)
+#define PSC_I2SCFG_DIV8 (2 << 13)
+#define PSC_I2SCFG_DIV16 (3 << 13)
+
+#define PSC_I2SCFG_BI (1 << 12)
+#define PSC_I2SCFG_BUF (1 << 11)
+#define PSC_I2SCFG_MLJ (1 << 10)
+#define PSC_I2SCFG_XM (1 << 9)
+
+/* The word length equation is simply LEN+1. */
+#define PSC_I2SCFG_SET_LEN(x) ((((x) - 1) & 0x1f) << 4)
+#define PSC_I2SCFG_GET_LEN(x) ((((x) >> 4) & 0x1f) + 1)
+
+#define PSC_I2SCFG_LB (1 << 2)
+#define PSC_I2SCFG_MLF (1 << 1)
+#define PSC_I2SCFG_MS (1 << 0)
+
+/* I2S Mask Register. */
+#define PSC_I2SMSK_RR (1 << 13)
+#define PSC_I2SMSK_RO (1 << 12)
+#define PSC_I2SMSK_RU (1 << 11)
+#define PSC_I2SMSK_TR (1 << 10)
+#define PSC_I2SMSK_TO (1 << 9)
+#define PSC_I2SMSK_TU (1 << 8)
+#define PSC_I2SMSK_RD (1 << 5)
+#define PSC_I2SMSK_TD (1 << 4)
+#define PSC_I2SMSK_ALLMASK (PSC_I2SMSK_RR | PSC_I2SMSK_RO | \
+ PSC_I2SMSK_RU | PSC_I2SMSK_TR | \
+ PSC_I2SMSK_TO | PSC_I2SMSK_TU | \
+ PSC_I2SMSK_RD | PSC_I2SMSK_TD)
+
+/* I2S Protocol Control Register. */
+#define PSC_I2SPCR_RC (1 << 6)
+#define PSC_I2SPCR_RP (1 << 5)
+#define PSC_I2SPCR_RS (1 << 4)
+#define PSC_I2SPCR_TC (1 << 2)
+#define PSC_I2SPCR_TP (1 << 1)
+#define PSC_I2SPCR_TS (1 << 0)
+
+/* I2S Status register (read only). */
+#define PSC_I2SSTAT_RF (1 << 13)
+#define PSC_I2SSTAT_RE (1 << 12)
+#define PSC_I2SSTAT_RR (1 << 11)
+#define PSC_I2SSTAT_TF (1 << 10)
+#define PSC_I2SSTAT_TE (1 << 9)
+#define PSC_I2SSTAT_TR (1 << 8)
+#define PSC_I2SSTAT_RB (1 << 5)
+#define PSC_I2SSTAT_TB (1 << 4)
+#define PSC_I2SSTAT_DI (1 << 2)
+#define PSC_I2SSTAT_DR (1 << 1)
+#define PSC_I2SSTAT_SR (1 << 0)
+
+/* I2S Event Register. */
+#define PSC_I2SEVNT_RR (1 << 13)
+#define PSC_I2SEVNT_RO (1 << 12)
+#define PSC_I2SEVNT_RU (1 << 11)
+#define PSC_I2SEVNT_TR (1 << 10)
+#define PSC_I2SEVNT_TO (1 << 9)
+#define PSC_I2SEVNT_TU (1 << 8)
+#define PSC_I2SEVNT_RD (1 << 5)
+#define PSC_I2SEVNT_TD (1 << 4)
+
+/* PSC in SPI Mode. */
+typedef struct psc_spi {
+ u32 psc_sel;
+ u32 psc_ctrl;
+ u32 psc_spicfg;
+ u32 psc_spimsk;
+ u32 psc_spipcr;
+ u32 psc_spistat;
+ u32 psc_spievent;
+ u32 psc_spitxrx;
+} psc_spi_t;
+
+/* SPI Config Register. */
+#define PSC_SPICFG_RT_MASK (3 << 30)
+#define PSC_SPICFG_RT_FIFO1 (0 << 30)
+#define PSC_SPICFG_RT_FIFO2 (1 << 30)
+#define PSC_SPICFG_RT_FIFO4 (2 << 30)
+#define PSC_SPICFG_RT_FIFO8 (3 << 30)
+
+#define PSC_SPICFG_TT_MASK (3 << 28)
+#define PSC_SPICFG_TT_FIFO1 (0 << 28)
+#define PSC_SPICFG_TT_FIFO2 (1 << 28)
+#define PSC_SPICFG_TT_FIFO4 (2 << 28)
+#define PSC_SPICFG_TT_FIFO8 (3 << 28)
+
+#define PSC_SPICFG_DD_DISABLE (1 << 27)
+#define PSC_SPICFG_DE_ENABLE (1 << 26)
+#define PSC_SPICFG_CLR_BAUD(x) ((x) & ~((0x3f) << 15))
+#define PSC_SPICFG_SET_BAUD(x) (((x) & 0x3f) << 15)
+
+#define PSC_SPICFG_SET_DIV(x) (((x) & 0x03) << 13)
+#define PSC_SPICFG_DIV2 0
+#define PSC_SPICFG_DIV4 1
+#define PSC_SPICFG_DIV8 2
+#define PSC_SPICFG_DIV16 3
+
+#define PSC_SPICFG_BI (1 << 12)
+#define PSC_SPICFG_PSE (1 << 11)
+#define PSC_SPICFG_CGE (1 << 10)
+#define PSC_SPICFG_CDE (1 << 9)
+
+#define PSC_SPICFG_CLR_LEN(x) ((x) & ~((0x1f) << 4))
+#define PSC_SPICFG_SET_LEN(x) (((x-1) & 0x1f) << 4)
+
+#define PSC_SPICFG_LB (1 << 3)
+#define PSC_SPICFG_MLF (1 << 1)
+#define PSC_SPICFG_MO (1 << 0)
+
+/* SPI Mask Register. */
+#define PSC_SPIMSK_MM (1 << 16)
+#define PSC_SPIMSK_RR (1 << 13)
+#define PSC_SPIMSK_RO (1 << 12)
+#define PSC_SPIMSK_RU (1 << 11)
+#define PSC_SPIMSK_TR (1 << 10)
+#define PSC_SPIMSK_TO (1 << 9)
+#define PSC_SPIMSK_TU (1 << 8)
+#define PSC_SPIMSK_SD (1 << 5)
+#define PSC_SPIMSK_MD (1 << 4)
+#define PSC_SPIMSK_ALLMASK (PSC_SPIMSK_MM | PSC_SPIMSK_RR | \
+ PSC_SPIMSK_RO | PSC_SPIMSK_TO | \
+ PSC_SPIMSK_TU | PSC_SPIMSK_SD | \
+ PSC_SPIMSK_MD)
+
+/* SPI Protocol Control Register. */
+#define PSC_SPIPCR_RC (1 << 6)
+#define PSC_SPIPCR_SP (1 << 5)
+#define PSC_SPIPCR_SS (1 << 4)
+#define PSC_SPIPCR_TC (1 << 2)
+#define PSC_SPIPCR_MS (1 << 0)
+
+/* SPI Status register (read only). */
+#define PSC_SPISTAT_RF (1 << 13)
+#define PSC_SPISTAT_RE (1 << 12)
+#define PSC_SPISTAT_RR (1 << 11)
+#define PSC_SPISTAT_TF (1 << 10)
+#define PSC_SPISTAT_TE (1 << 9)
+#define PSC_SPISTAT_TR (1 << 8)
+#define PSC_SPISTAT_SB (1 << 5)
+#define PSC_SPISTAT_MB (1 << 4)
+#define PSC_SPISTAT_DI (1 << 2)
+#define PSC_SPISTAT_DR (1 << 1)
+#define PSC_SPISTAT_SR (1 << 0)
+
+/* SPI Event Register. */
+#define PSC_SPIEVNT_MM (1 << 16)
+#define PSC_SPIEVNT_RR (1 << 13)
+#define PSC_SPIEVNT_RO (1 << 12)
+#define PSC_SPIEVNT_RU (1 << 11)
+#define PSC_SPIEVNT_TR (1 << 10)
+#define PSC_SPIEVNT_TO (1 << 9)
+#define PSC_SPIEVNT_TU (1 << 8)
+#define PSC_SPIEVNT_SD (1 << 5)
+#define PSC_SPIEVNT_MD (1 << 4)
+
+/* Transmit register control. */
+#define PSC_SPITXRX_LC (1 << 29)
+#define PSC_SPITXRX_SR (1 << 28)
+
+/* PSC in SMBus (I2C) Mode. */
+typedef struct psc_smb {
+ u32 psc_sel;
+ u32 psc_ctrl;
+ u32 psc_smbcfg;
+ u32 psc_smbmsk;
+ u32 psc_smbpcr;
+ u32 psc_smbstat;
+ u32 psc_smbevnt;
+ u32 psc_smbtxrx;
+ u32 psc_smbtmr;
+} psc_smb_t;
+
+/* SMBus Config Register. */
+#define PSC_SMBCFG_RT_MASK (3 << 30)
+#define PSC_SMBCFG_RT_FIFO1 (0 << 30)
+#define PSC_SMBCFG_RT_FIFO2 (1 << 30)
+#define PSC_SMBCFG_RT_FIFO4 (2 << 30)
+#define PSC_SMBCFG_RT_FIFO8 (3 << 30)
+
+#define PSC_SMBCFG_TT_MASK (3 << 28)
+#define PSC_SMBCFG_TT_FIFO1 (0 << 28)
+#define PSC_SMBCFG_TT_FIFO2 (1 << 28)
+#define PSC_SMBCFG_TT_FIFO4 (2 << 28)
+#define PSC_SMBCFG_TT_FIFO8 (3 << 28)
+
+#define PSC_SMBCFG_DD_DISABLE (1 << 27)
+#define PSC_SMBCFG_DE_ENABLE (1 << 26)
+
+#define PSC_SMBCFG_SET_DIV(x) (((x) & 0x03) << 13)
+#define PSC_SMBCFG_DIV2 0
+#define PSC_SMBCFG_DIV4 1
+#define PSC_SMBCFG_DIV8 2
+#define PSC_SMBCFG_DIV16 3
+
+#define PSC_SMBCFG_GCE (1 << 9)
+#define PSC_SMBCFG_SFM (1 << 8)
+
+#define PSC_SMBCFG_SET_SLV(x) (((x) & 0x7f) << 1)
+
+/* SMBus Mask Register. */
+#define PSC_SMBMSK_DN (1 << 30)
+#define PSC_SMBMSK_AN (1 << 29)
+#define PSC_SMBMSK_AL (1 << 28)
+#define PSC_SMBMSK_RR (1 << 13)
+#define PSC_SMBMSK_RO (1 << 12)
+#define PSC_SMBMSK_RU (1 << 11)
+#define PSC_SMBMSK_TR (1 << 10)
+#define PSC_SMBMSK_TO (1 << 9)
+#define PSC_SMBMSK_TU (1 << 8)
+#define PSC_SMBMSK_SD (1 << 5)
+#define PSC_SMBMSK_MD (1 << 4)
+#define PSC_SMBMSK_ALLMASK (PSC_SMBMSK_DN | PSC_SMBMSK_AN | \
+ PSC_SMBMSK_AL | PSC_SMBMSK_RR | \
+ PSC_SMBMSK_RO | PSC_SMBMSK_TO | \
+ PSC_SMBMSK_TU | PSC_SMBMSK_SD | \
+ PSC_SMBMSK_MD)
+
+/* SMBus Protocol Control Register. */
+#define PSC_SMBPCR_DC (1 << 2)
+#define PSC_SMBPCR_MS (1 << 0)
+
+/* SMBus Status register (read only). */
+#define PSC_SMBSTAT_BB (1 << 28)
+#define PSC_SMBSTAT_RF (1 << 13)
+#define PSC_SMBSTAT_RE (1 << 12)
+#define PSC_SMBSTAT_RR (1 << 11)
+#define PSC_SMBSTAT_TF (1 << 10)
+#define PSC_SMBSTAT_TE (1 << 9)
+#define PSC_SMBSTAT_TR (1 << 8)
+#define PSC_SMBSTAT_SB (1 << 5)
+#define PSC_SMBSTAT_MB (1 << 4)
+#define PSC_SMBSTAT_DI (1 << 2)
+#define PSC_SMBSTAT_DR (1 << 1)
+#define PSC_SMBSTAT_SR (1 << 0)
+
+/* SMBus Event Register. */
+#define PSC_SMBEVNT_DN (1 << 30)
+#define PSC_SMBEVNT_AN (1 << 29)
+#define PSC_SMBEVNT_AL (1 << 28)
+#define PSC_SMBEVNT_RR (1 << 13)
+#define PSC_SMBEVNT_RO (1 << 12)
+#define PSC_SMBEVNT_RU (1 << 11)
+#define PSC_SMBEVNT_TR (1 << 10)
+#define PSC_SMBEVNT_TO (1 << 9)
+#define PSC_SMBEVNT_TU (1 << 8)
+#define PSC_SMBEVNT_SD (1 << 5)
+#define PSC_SMBEVNT_MD (1 << 4)
+#define PSC_SMBEVNT_ALLCLR (PSC_SMBEVNT_DN | PSC_SMBEVNT_AN | \
+ PSC_SMBEVNT_AL | PSC_SMBEVNT_RR | \
+ PSC_SMBEVNT_RO | PSC_SMBEVNT_TO | \
+ PSC_SMBEVNT_TU | PSC_SMBEVNT_SD | \
+ PSC_SMBEVNT_MD)
+
+/* Transmit register control. */
+#define PSC_SMBTXRX_RSR (1 << 28)
+#define PSC_SMBTXRX_STP (1 << 29)
+#define PSC_SMBTXRX_DATAMASK 0xff
+
+/* SMBus protocol timers register. */
+#define PSC_SMBTMR_SET_TH(x) (((x) & 0x03) << 30)
+#define PSC_SMBTMR_SET_PS(x) (((x) & 0x1f) << 25)
+#define PSC_SMBTMR_SET_PU(x) (((x) & 0x1f) << 20)
+#define PSC_SMBTMR_SET_SH(x) (((x) & 0x1f) << 15)
+#define PSC_SMBTMR_SET_SU(x) (((x) & 0x1f) << 10)
+#define PSC_SMBTMR_SET_CL(x) (((x) & 0x1f) << 5)
+#define PSC_SMBTMR_SET_CH(x) (((x) & 0x1f) << 0)
+
+#endif /* _AU1000_PSC_H_ */
diff --git a/arch/mips/include/asm/mach-au1x00/gpio.h b/arch/mips/include/asm/mach-au1x00/gpio.h
new file mode 100644
index 00000000000..2dc61e009a0
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/gpio.h
@@ -0,0 +1,69 @@
+#ifndef _AU1XXX_GPIO_H_
+#define _AU1XXX_GPIO_H_
+
+#include <linux/types.h>
+
+#define AU1XXX_GPIO_BASE 200
+
+struct au1x00_gpio2 {
+ u32 dir;
+ u32 reserved;
+ u32 output;
+ u32 pinstate;
+ u32 inten;
+ u32 enable;
+};
+
+extern int au1xxx_gpio_get_value(unsigned gpio);
+extern void au1xxx_gpio_set_value(unsigned gpio, int value);
+extern int au1xxx_gpio_direction_input(unsigned gpio);
+extern int au1xxx_gpio_direction_output(unsigned gpio, int value);
+
+
+/* Wrappers for the arch-neutral GPIO API */
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+ /* Not yet implemented */
+ return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+ /* Not yet implemented */
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+ return au1xxx_gpio_direction_input(gpio);
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+ return au1xxx_gpio_direction_output(gpio, value);
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ return au1xxx_gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ au1xxx_gpio_set_value(gpio, value);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+ return gpio;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+ return irq;
+}
+
+/* For cansleep */
+#include <asm-generic/gpio.h>
+
+#endif /* _AU1XXX_GPIO_H_ */
diff --git a/arch/mips/include/asm/mach-au1x00/ioremap.h b/arch/mips/include/asm/mach-au1x00/ioremap.h
new file mode 100644
index 00000000000..364cea2dc71
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/ioremap.h
@@ -0,0 +1,42 @@
+/*
+ * include/asm-mips/mach-au1x00/ioremap.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MACH_AU1X00_IOREMAP_H
+#define __ASM_MACH_AU1X00_IOREMAP_H
+
+#include <linux/types.h>
+
+#ifdef CONFIG_64BIT_PHYS_ADDR
+extern phys_t __fixup_bigphys_addr(phys_t, phys_t);
+#else
+static inline phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+{
+ return phys_addr;
+}
+#endif
+
+/*
+ * Allow physical addresses to be fixed up to help 36-bit peripherals.
+ */
+static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+{
+ return __fixup_bigphys_addr(phys_addr, size);
+}
+
+static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size,
+ unsigned long flags)
+{
+ return NULL;
+}
+
+static inline int plat_iounmap(const volatile void __iomem *addr)
+{
+ return 0;
+}
+
+#endif /* __ASM_MACH_AU1X00_IOREMAP_H */
diff --git a/arch/mips/include/asm/mach-au1x00/prom.h b/arch/mips/include/asm/mach-au1x00/prom.h
new file mode 100644
index 00000000000..e38715577c5
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/prom.h
@@ -0,0 +1,13 @@
+#ifndef __AU1X00_PROM_H
+#define __AU1X00_PROM_H
+
+extern int prom_argc;
+extern char **prom_argv;
+extern char **prom_envp;
+
+extern void prom_init_cmdline(void);
+extern char *prom_getcmdline(void);
+extern char *prom_getenv(char *envname);
+extern int prom_get_ethernet_addr(char *ethernet_addr);
+
+#endif
diff --git a/arch/mips/include/asm/mach-au1x00/war.h b/arch/mips/include/asm/mach-au1x00/war.h
new file mode 100644
index 00000000000..dd57d03d68b
--- /dev/null
+++ b/arch/mips/include/asm/mach-au1x00/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_AU1X00_WAR_H
+#define __ASM_MIPS_MACH_AU1X00_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_AU1X00_WAR_H */
diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
new file mode 100644
index 00000000000..d008f47a28b
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __ASM_BCM47XX_H
+#define __ASM_BCM47XX_H
+
+/* SSB bus */
+extern struct ssb_bus ssb_bcm47xx;
+
+#endif /* __ASM_BCM47XX_H */
diff --git a/arch/mips/include/asm/mach-bcm47xx/gpio.h b/arch/mips/include/asm/mach-bcm47xx/gpio.h
new file mode 100644
index 00000000000..d8ff4cd89ab
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
@@ -0,0 +1,58 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
+ */
+
+#ifndef __BCM47XX_GPIO_H
+#define __BCM47XX_GPIO_H
+
+#include <linux/ssb/ssb_embedded.h>
+#include <asm/mach-bcm47xx/bcm47xx.h>
+
+#define BCM47XX_EXTIF_GPIO_LINES 5
+#define BCM47XX_CHIPCO_GPIO_LINES 16
+
+extern int gpio_request(unsigned gpio, const char *label);
+extern void gpio_free(unsigned gpio);
+extern int gpio_to_irq(unsigned gpio);
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ return ssb_gpio_in(&ssb_bcm47xx, 1 << gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ ssb_gpio_out(&ssb_bcm47xx, 1 << gpio, value ? 1 << gpio : 0);
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+ return ssb_gpio_outen(&ssb_bcm47xx, 1 << gpio, 0);
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+ return ssb_gpio_outen(&ssb_bcm47xx, 1 << gpio, 1 << gpio);
+}
+
+static int gpio_intmask(unsigned gpio, int value)
+{
+ return ssb_gpio_intmask(&ssb_bcm47xx, 1 << gpio,
+ value ? 1 << gpio : 0);
+}
+
+static int gpio_polarity(unsigned gpio, int value)
+{
+ return ssb_gpio_polarity(&ssb_bcm47xx, 1 << gpio,
+ value ? 1 << gpio : 0);
+}
+
+
+/* cansleep wrappers */
+#include <asm-generic/gpio.h>
+
+#endif /* __BCM47XX_GPIO_H */
diff --git a/arch/mips/include/asm/mach-bcm47xx/war.h b/arch/mips/include/asm/mach-bcm47xx/war.h
new file mode 100644
index 00000000000..87cd4651dda
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm47xx/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_BCM47XX_WAR_H
+#define __ASM_MIPS_MACH_BCM47XX_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_BCM47XX_WAR_H */
diff --git a/arch/mips/include/asm/mach-cobalt/cobalt.h b/arch/mips/include/asm/mach-cobalt/cobalt.h
new file mode 100644
index 00000000000..5b9fce73f11
--- /dev/null
+++ b/arch/mips/include/asm/mach-cobalt/cobalt.h
@@ -0,0 +1,22 @@
+/*
+ * The Cobalt board ID information.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997 Cobalt Microserver
+ * Copyright (C) 1997, 2003 Ralf Baechle
+ * Copyright (C) 2001, 2002, 2003 Liam Davies (ldavies@agile.tv)
+ */
+#ifndef __ASM_COBALT_H
+#define __ASM_COBALT_H
+
+extern int cobalt_board_id;
+
+#define COBALT_BRD_ID_QUBE1 0x3
+#define COBALT_BRD_ID_RAQ1 0x4
+#define COBALT_BRD_ID_QUBE2 0x5
+#define COBALT_BRD_ID_RAQ2 0x6
+
+#endif /* __ASM_COBALT_H */
diff --git a/arch/mips/include/asm/mach-cobalt/cpu-feature-overrides.h b/arch/mips/include/asm/mach-cobalt/cpu-feature-overrides.h
new file mode 100644
index 00000000000..b3314cf5319
--- /dev/null
+++ b/arch/mips/include/asm/mach-cobalt/cpu-feature-overrides.h
@@ -0,0 +1,56 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006, 07 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_COBALT_CPU_FEATURE_OVERRIDES_H
+#define __ASM_COBALT_CPU_FEATURE_OVERRIDES_H
+
+
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_3k_cache 0
+#define cpu_has_4k_cache 1
+#define cpu_has_tx39_cache 0
+#define cpu_has_fpu 1
+#define cpu_has_32fpr 1
+#define cpu_has_counter 1
+#define cpu_has_watch 0
+#define cpu_has_divec 1
+#define cpu_has_vce 0
+#define cpu_has_cache_cdex_p 0
+#define cpu_has_cache_cdex_s 0
+#define cpu_has_prefetch 0
+#define cpu_has_mcheck 0
+#define cpu_has_ejtag 0
+
+#define cpu_has_inclusive_pcaches 0
+#define cpu_dcache_line_size() 32
+#define cpu_icache_line_size() 32
+#define cpu_scache_line_size() 0
+
+#ifdef CONFIG_64BIT
+#define cpu_has_llsc 0
+#else
+#define cpu_has_llsc 1
+#endif
+
+#define cpu_has_mips16 0
+#define cpu_has_mdmx 0
+#define cpu_has_mips3d 0
+#define cpu_has_smartmips 0
+#define cpu_has_vtag_icache 0
+#define cpu_has_ic_fills_f_dc 0
+#define cpu_icache_snoops_remote_store 0
+#define cpu_has_dsp 0
+#define cpu_has_mipsmt 0
+#define cpu_has_userlocal 0
+
+#define cpu_has_mips32r1 0
+#define cpu_has_mips32r2 0
+#define cpu_has_mips64r1 0
+#define cpu_has_mips64r2 0
+
+#endif /* __ASM_COBALT_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-cobalt/irq.h b/arch/mips/include/asm/mach-cobalt/irq.h
new file mode 100644
index 00000000000..57c8c9ac585
--- /dev/null
+++ b/arch/mips/include/asm/mach-cobalt/irq.h
@@ -0,0 +1,57 @@
+/*
+ * Cobalt IRQ definitions.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997 Cobalt Microserver
+ * Copyright (C) 1997, 2003 Ralf Baechle
+ * Copyright (C) 2001-2003 Liam Davies (ldavies@agile.tv)
+ * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ */
+#ifndef _ASM_COBALT_IRQ_H
+#define _ASM_COBALT_IRQ_H
+
+/*
+ * i8259 interrupts used on Cobalt:
+ *
+ * 8 - RTC
+ * 9 - PCI slot
+ * 14 - IDE0
+ * 15 - IDE1(no connector on board)
+ */
+#define I8259A_IRQ_BASE 0
+
+#define PCISLOT_IRQ (I8259A_IRQ_BASE + 9)
+
+/*
+ * CPU interrupts used on Cobalt:
+ *
+ * 0 - Software interrupt 0 (unused)
+ * 1 - Software interrupt 0 (unused)
+ * 2 - cascade GT64111
+ * 3 - ethernet or SCSI host controller
+ * 4 - ethernet
+ * 5 - 16550 UART
+ * 6 - cascade i8259
+ * 7 - CP0 counter
+ */
+#define MIPS_CPU_IRQ_BASE 16
+
+#define GT641XX_CASCADE_IRQ (MIPS_CPU_IRQ_BASE + 2)
+#define RAQ2_SCSI_IRQ (MIPS_CPU_IRQ_BASE + 3)
+#define ETH0_IRQ (MIPS_CPU_IRQ_BASE + 3)
+#define QUBE1_ETH0_IRQ (MIPS_CPU_IRQ_BASE + 4)
+#define ETH1_IRQ (MIPS_CPU_IRQ_BASE + 4)
+#define SERIAL_IRQ (MIPS_CPU_IRQ_BASE + 5)
+#define SCSI_IRQ (MIPS_CPU_IRQ_BASE + 5)
+#define I8259_CASCADE_IRQ (MIPS_CPU_IRQ_BASE + 6)
+
+#define GT641XX_IRQ_BASE 24
+
+#include <asm/irq_gt641xx.h>
+
+#define NR_IRQS (GT641XX_PCI_INT3_IRQ + 1)
+
+#endif /* _ASM_COBALT_IRQ_H */
diff --git a/arch/mips/include/asm/mach-cobalt/mach-gt64120.h b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h
new file mode 100644
index 00000000000..ae9c5523c7e
--- /dev/null
+++ b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#ifndef _COBALT_MACH_GT64120_H
+#define _COBALT_MACH_GT64120_H
+
+/*
+ * Cobalt uses GT64111. GT64111 is almost the same as GT64120.
+ */
+
+#define GT64120_BASE CKSEG1ADDR(GT_DEF_BASE)
+
+#endif /* _COBALT_MACH_GT64120_H */
diff --git a/arch/mips/include/asm/mach-cobalt/war.h b/arch/mips/include/asm/mach-cobalt/war.h
new file mode 100644
index 00000000000..97884fd18ac
--- /dev/null
+++ b/arch/mips/include/asm/mach-cobalt/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_COBALT_WAR_H
+#define __ASM_MIPS_MACH_COBALT_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_COBALT_WAR_H */
diff --git a/arch/mips/include/asm/mach-db1x00/db1200.h b/arch/mips/include/asm/mach-db1x00/db1200.h
new file mode 100644
index 00000000000..27f26102b1b
--- /dev/null
+++ b/arch/mips/include/asm/mach-db1x00/db1200.h
@@ -0,0 +1,230 @@
+/*
+ * AMD Alchemy DBAu1200 Reference Board
+ * Board register defines.
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_DB1200_H
+#define __ASM_DB1200_H
+
+#include <linux/types.h>
+#include <asm/mach-au1x00/au1xxx_psc.h>
+
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
+
+/*
+ * SPI and SMB are muxed on the DBAu1200 board.
+ * Refer to board documentation.
+ */
+#define SPI_PSC_BASE PSC0_BASE_ADDR
+#define SMBUS_PSC_BASE PSC0_BASE_ADDR
+/*
+ * AC'97 and I2S are muxed on the DBAu1200 board.
+ * Refer to board documentation.
+ */
+#define AC97_PSC_BASE PSC1_BASE_ADDR
+#define I2S_PSC_BASE PSC1_BASE_ADDR
+
+#define BCSR_KSEG1_ADDR 0xB9800000
+
+typedef volatile struct
+{
+ /*00*/ u16 whoami;
+ u16 reserved0;
+ /*04*/ u16 status;
+ u16 reserved1;
+ /*08*/ u16 switches;
+ u16 reserved2;
+ /*0C*/ u16 resets;
+ u16 reserved3;
+
+ /*10*/ u16 pcmcia;
+ u16 reserved4;
+ /*14*/ u16 board;
+ u16 reserved5;
+ /*18*/ u16 disk_leds;
+ u16 reserved6;
+ /*1C*/ u16 system;
+ u16 reserved7;
+
+ /*20*/ u16 intclr;
+ u16 reserved8;
+ /*24*/ u16 intset;
+ u16 reserved9;
+ /*28*/ u16 intclr_mask;
+ u16 reserved10;
+ /*2C*/ u16 intset_mask;
+ u16 reserved11;
+
+ /*30*/ u16 sig_status;
+ u16 reserved12;
+ /*34*/ u16 int_status;
+ u16 reserved13;
+ /*38*/ u16 reserved14;
+ u16 reserved15;
+ /*3C*/ u16 reserved16;
+ u16 reserved17;
+
+} BCSR;
+
+static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+/*
+ * Register bit definitions for the BCSRs
+ */
+#define BCSR_WHOAMI_DCID 0x000F
+#define BCSR_WHOAMI_CPLD 0x00F0
+#define BCSR_WHOAMI_BOARD 0x0F00
+
+#define BCSR_STATUS_PCMCIA0VS 0x0003
+#define BCSR_STATUS_PCMCIA1VS 0x000C
+#define BCSR_STATUS_SWAPBOOT 0x0040
+#define BCSR_STATUS_FLASHBUSY 0x0100
+#define BCSR_STATUS_IDECBLID 0x0200
+#define BCSR_STATUS_SD0WP 0x0400
+#define BCSR_STATUS_U0RXD 0x1000
+#define BCSR_STATUS_U1RXD 0x2000
+
+#define BCSR_SWITCHES_OCTAL 0x00FF
+#define BCSR_SWITCHES_DIP_1 0x0080
+#define BCSR_SWITCHES_DIP_2 0x0040
+#define BCSR_SWITCHES_DIP_3 0x0020
+#define BCSR_SWITCHES_DIP_4 0x0010
+#define BCSR_SWITCHES_DIP_5 0x0008
+#define BCSR_SWITCHES_DIP_6 0x0004
+#define BCSR_SWITCHES_DIP_7 0x0002
+#define BCSR_SWITCHES_DIP_8 0x0001
+#define BCSR_SWITCHES_ROTARY 0x0F00
+
+#define BCSR_RESETS_ETH 0x0001
+#define BCSR_RESETS_CAMERA 0x0002
+#define BCSR_RESETS_DC 0x0004
+#define BCSR_RESETS_IDE 0x0008
+#define BCSR_RESETS_TV 0x0010
+/* Not resets but in the same register */
+#define BCSR_RESETS_PWMR1MUX 0x0800
+#define BCSR_RESETS_PCS0MUX 0x1000
+#define BCSR_RESETS_PCS1MUX 0x2000
+#define BCSR_RESETS_SPISEL 0x4000
+
+#define BCSR_PCMCIA_PC0VPP 0x0003
+#define BCSR_PCMCIA_PC0VCC 0x000C
+#define BCSR_PCMCIA_PC0DRVEN 0x0010
+#define BCSR_PCMCIA_PC0RST 0x0080
+#define BCSR_PCMCIA_PC1VPP 0x0300
+#define BCSR_PCMCIA_PC1VCC 0x0C00
+#define BCSR_PCMCIA_PC1DRVEN 0x1000
+#define BCSR_PCMCIA_PC1RST 0x8000
+
+#define BCSR_BOARD_LCDVEE 0x0001
+#define BCSR_BOARD_LCDVDD 0x0002
+#define BCSR_BOARD_LCDBL 0x0004
+#define BCSR_BOARD_CAMSNAP 0x0010
+#define BCSR_BOARD_CAMPWR 0x0020
+#define BCSR_BOARD_SD0PWR 0x0040
+
+#define BCSR_LEDS_DECIMALS 0x0003
+#define BCSR_LEDS_LED0 0x0100
+#define BCSR_LEDS_LED1 0x0200
+#define BCSR_LEDS_LED2 0x0400
+#define BCSR_LEDS_LED3 0x0800
+
+#define BCSR_SYSTEM_POWEROFF 0x4000
+#define BCSR_SYSTEM_RESET 0x8000
+
+/* Bit positions for the different interrupt sources */
+#define BCSR_INT_IDE 0x0001
+#define BCSR_INT_ETH 0x0002
+#define BCSR_INT_PC0 0x0004
+#define BCSR_INT_PC0STSCHG 0x0008
+#define BCSR_INT_PC1 0x0010
+#define BCSR_INT_PC1STSCHG 0x0020
+#define BCSR_INT_DC 0x0040
+#define BCSR_INT_FLASHBUSY 0x0080
+#define BCSR_INT_PC0INSERT 0x0100
+#define BCSR_INT_PC0EJECT 0x0200
+#define BCSR_INT_PC1INSERT 0x0400
+#define BCSR_INT_PC1EJECT 0x0800
+#define BCSR_INT_SD0INSERT 0x1000
+#define BCSR_INT_SD0EJECT 0x2000
+
+#define SMC91C111_PHYS_ADDR 0x19000300
+#define SMC91C111_INT DB1200_ETH_INT
+
+#define IDE_PHYS_ADDR 0x18800000
+#define IDE_REG_SHIFT 5
+#define IDE_PHYS_LEN (16 << IDE_REG_SHIFT)
+#define IDE_INT DB1200_IDE_INT
+#define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1
+#define IDE_RQSIZE 128
+
+#define NAND_PHYS_ADDR 0x20000000
+
+/*
+ * External Interrupts for DBAu1200 as of 8/6/2004.
+ * Bit positions in the CPLD registers can be calculated by taking
+ * the interrupt define and subtracting the DB1200_INT_BEGIN value.
+ *
+ * Example: IDE bis pos is = 64 - 64
+ * ETH bit pos is = 65 - 64
+ */
+enum external_pb1200_ints {
+ DB1200_INT_BEGIN = AU1000_MAX_INTR + 1,
+
+ DB1200_IDE_INT = DB1200_INT_BEGIN,
+ DB1200_ETH_INT,
+ DB1200_PC0_INT,
+ DB1200_PC0_STSCHG_INT,
+ DB1200_PC1_INT,
+ DB1200_PC1_STSCHG_INT,
+ DB1200_DC_INT,
+ DB1200_FLASHBUSY_INT,
+ DB1200_PC0_INSERT_INT,
+ DB1200_PC0_EJECT_INT,
+ DB1200_PC1_INSERT_INT,
+ DB1200_PC1_EJECT_INT,
+ DB1200_SD0_INSERT_INT,
+ DB1200_SD0_EJECT_INT,
+
+ DB1200_INT_END = DB1200_INT_BEGIN + 15,
+};
+
+
+/*
+ * DBAu1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c
+ */
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT) \
+ ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
+
+#define BOARD_PC0_INT DB1200_PC0_INT
+#define BOARD_PC1_INT DB1200_PC1_INT
+#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET)))
+
+/* NAND chip select */
+#define NAND_CS 1
+
+#endif /* __ASM_DB1200_H */
diff --git a/arch/mips/include/asm/mach-db1x00/db1x00.h b/arch/mips/include/asm/mach-db1x00/db1x00.h
new file mode 100644
index 00000000000..1a515b8c870
--- /dev/null
+++ b/arch/mips/include/asm/mach-db1x00/db1x00.h
@@ -0,0 +1,179 @@
+/*
+ * AMD Alchemy DBAu1x00 Reference Boards
+ *
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_DB1X00_H
+#define __ASM_DB1X00_H
+
+#include <asm/mach-au1x00/au1xxx_psc.h>
+
+#ifdef CONFIG_MIPS_DB1550
+
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX
+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX
+
+#define SPI_PSC_BASE PSC0_BASE_ADDR
+#define AC97_PSC_BASE PSC1_BASE_ADDR
+#define SMBUS_PSC_BASE PSC2_BASE_ADDR
+#define I2S_PSC_BASE PSC3_BASE_ADDR
+
+#define BCSR_KSEG1_ADDR 0xAF000000
+#define NAND_PHYS_ADDR 0x20000000
+
+#else
+#define BCSR_KSEG1_ADDR 0xAE000000
+#endif
+
+/*
+ * Overlay data structure of the DBAu1x00 board registers.
+ * Registers are located at physical 0E0000xx, KSEG1 0xAE0000xx.
+ */
+typedef volatile struct
+{
+ /*00*/ unsigned short whoami;
+ unsigned short reserved0;
+ /*04*/ unsigned short status;
+ unsigned short reserved1;
+ /*08*/ unsigned short switches;
+ unsigned short reserved2;
+ /*0C*/ unsigned short resets;
+ unsigned short reserved3;
+ /*10*/ unsigned short pcmcia;
+ unsigned short reserved4;
+ /*14*/ unsigned short specific;
+ unsigned short reserved5;
+ /*18*/ unsigned short leds;
+ unsigned short reserved6;
+ /*1C*/ unsigned short swreset;
+ unsigned short reserved7;
+
+} BCSR;
+
+
+/*
+ * Register/mask bit definitions for the BCSRs
+ */
+#define BCSR_WHOAMI_DCID 0x000F
+#define BCSR_WHOAMI_CPLD 0x00F0
+#define BCSR_WHOAMI_BOARD 0x0F00
+
+#define BCSR_STATUS_PC0VS 0x0003
+#define BCSR_STATUS_PC1VS 0x000C
+#define BCSR_STATUS_PC0FI 0x0010
+#define BCSR_STATUS_PC1FI 0x0020
+#define BCSR_STATUS_FLASHBUSY 0x0100
+#define BCSR_STATUS_ROMBUSY 0x0400
+#define BCSR_STATUS_SWAPBOOT 0x2000
+#define BCSR_STATUS_FLASHDEN 0xC000
+
+#define BCSR_SWITCHES_DIP 0x00FF
+#define BCSR_SWITCHES_DIP_1 0x0080
+#define BCSR_SWITCHES_DIP_2 0x0040
+#define BCSR_SWITCHES_DIP_3 0x0020
+#define BCSR_SWITCHES_DIP_4 0x0010
+#define BCSR_SWITCHES_DIP_5 0x0008
+#define BCSR_SWITCHES_DIP_6 0x0004
+#define BCSR_SWITCHES_DIP_7 0x0002
+#define BCSR_SWITCHES_DIP_8 0x0001
+#define BCSR_SWITCHES_ROTARY 0x0F00
+
+#define BCSR_RESETS_PHY0 0x0001
+#define BCSR_RESETS_PHY1 0x0002
+#define BCSR_RESETS_DC 0x0004
+#define BCSR_RESETS_FIR_SEL 0x2000
+#define BCSR_RESETS_IRDA_MODE_MASK 0xC000
+#define BCSR_RESETS_IRDA_MODE_FULL 0x0000
+#define BCSR_RESETS_IRDA_MODE_OFF 0x4000
+#define BCSR_RESETS_IRDA_MODE_2_3 0x8000
+#define BCSR_RESETS_IRDA_MODE_1_3 0xC000
+
+#define BCSR_PCMCIA_PC0VPP 0x0003
+#define BCSR_PCMCIA_PC0VCC 0x000C
+#define BCSR_PCMCIA_PC0DRVEN 0x0010
+#define BCSR_PCMCIA_PC0RST 0x0080
+#define BCSR_PCMCIA_PC1VPP 0x0300
+#define BCSR_PCMCIA_PC1VCC 0x0C00
+#define BCSR_PCMCIA_PC1DRVEN 0x1000
+#define BCSR_PCMCIA_PC1RST 0x8000
+
+#define BCSR_BOARD_PCIM66EN 0x0001
+#define BCSR_BOARD_SD0_PWR 0x0040
+#define BCSR_BOARD_SD1_PWR 0x0080
+#define BCSR_BOARD_PCIM33 0x0100
+#define BCSR_BOARD_GPIO200RST 0x0400
+#define BCSR_BOARD_PCICFG 0x1000
+#define BCSR_BOARD_SD0_WP 0x4000
+#define BCSR_BOARD_SD1_WP 0x8000
+
+#define BCSR_LEDS_DECIMALS 0x0003
+#define BCSR_LEDS_LED0 0x0100
+#define BCSR_LEDS_LED1 0x0200
+#define BCSR_LEDS_LED2 0x0400
+#define BCSR_LEDS_LED3 0x0800
+
+#define BCSR_SWRESET_RESET 0x0080
+
+/* PCMCIA DBAu1x00 specific defines */
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT)\
+ ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
+
+/*
+ * NAND defines
+ *
+ * Timing values as described in databook, * ns value stripped of the
+ * lower 2 bits.
+ * These defines are here rather than an Au1550 generic file because
+ * the parts chosen on another board may be different and may require
+ * different timings.
+ */
+#define NAND_T_H (18 >> 2)
+#define NAND_T_PUL (30 >> 2)
+#define NAND_T_SU (30 >> 2)
+#define NAND_T_WH (30 >> 2)
+
+/* Bitfield shift amounts */
+#define NAND_T_H_SHIFT 0
+#define NAND_T_PUL_SHIFT 4
+#define NAND_T_SU_SHIFT 8
+#define NAND_T_WH_SHIFT 12
+
+#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
+ ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
+ ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
+ ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT))
+#define NAND_CS 1
+
+/* Should be done by YAMON */
+#define NAND_STCFG 0x00400005 /* 8-bit NAND */
+#define NAND_STTIME 0x00007774 /* valid for 396 MHz SD=2 only */
+#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */
+
+#endif /* __ASM_DB1X00_H */
diff --git a/arch/mips/include/asm/mach-dec/mc146818rtc.h b/arch/mips/include/asm/mach-dec/mc146818rtc.h
new file mode 100644
index 00000000000..6724e99e43e
--- /dev/null
+++ b/arch/mips/include/asm/mach-dec/mc146818rtc.h
@@ -0,0 +1,43 @@
+/*
+ * RTC definitions for DECstation style attached Dallas DS1287 chip.
+ *
+ * Copyright (C) 1998, 2001 by Ralf Baechle
+ * Copyright (C) 1998 by Harald Koerfgen
+ * Copyright (C) 2002, 2005 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MIPS_DEC_RTC_DEC_H
+#define __ASM_MIPS_DEC_RTC_DEC_H
+
+#include <linux/types.h>
+#include <asm/addrspace.h>
+#include <asm/dec/system.h>
+
+extern volatile u8 *dec_rtc_base;
+
+#define ARCH_RTC_LOCATION
+
+#define RTC_PORT(x) CPHYSADDR((long)dec_rtc_base)
+#define RTC_IO_EXTENT dec_kn_slot_size
+#define RTC_IOMAPPED 0
+#undef RTC_IRQ
+
+#define RTC_DEC_YEAR 0x3f /* Where we store the real year on DECs. */
+
+static inline unsigned char CMOS_READ(unsigned long addr)
+{
+ return dec_rtc_base[addr * 4];
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
+{
+ dec_rtc_base[addr * 4] = data;
+}
+
+#define RTC_ALWAYS_BCD 0
+
+#endif /* __ASM_MIPS_DEC_RTC_DEC_H */
diff --git a/arch/mips/include/asm/mach-dec/war.h b/arch/mips/include/asm/mach-dec/war.h
new file mode 100644
index 00000000000..ca5e2ef909a
--- /dev/null
+++ b/arch/mips/include/asm/mach-dec/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_DEC_WAR_H
+#define __ASM_MIPS_MACH_DEC_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_DEC_WAR_H */
diff --git a/arch/mips/include/asm/mach-emma2rh/irq.h b/arch/mips/include/asm/mach-emma2rh/irq.h
new file mode 100644
index 00000000000..5439eb85646
--- /dev/null
+++ b/arch/mips/include/asm/mach-emma2rh/irq.h
@@ -0,0 +1,15 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 by Ralf Baechle
+ */
+#ifndef __ASM_MACH_EMMA2RH_IRQ_H
+#define __ASM_MACH_EMMA2RH_IRQ_H
+
+#define NR_IRQS 256
+
+#include_next <irq.h>
+
+#endif /* __ASM_MACH_EMMA2RH_IRQ_H */
diff --git a/arch/mips/include/asm/mach-emma2rh/war.h b/arch/mips/include/asm/mach-emma2rh/war.h
new file mode 100644
index 00000000000..b660a4c30e6
--- /dev/null
+++ b/arch/mips/include/asm/mach-emma2rh/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_EMMA2RH_WAR_H
+#define __ASM_MIPS_MACH_EMMA2RH_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_EMMA2RH_WAR_H */
diff --git a/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h b/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h
new file mode 100644
index 00000000000..107104c3cd1
--- /dev/null
+++ b/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h
@@ -0,0 +1,48 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004 Thomas Koeller <thomas.koeller@baslerweb.com>
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * Basler eXcite has an RM9122 processor.
+ */
+#define cpu_has_watch 1
+#define cpu_has_mips16 0
+#define cpu_has_divec 0
+#define cpu_has_vce 0
+#define cpu_has_cache_cdex_p 0
+#define cpu_has_cache_cdex_s 0
+#define cpu_has_prefetch 1
+#define cpu_has_mcheck 0
+#define cpu_has_ejtag 0
+
+#define cpu_has_llsc 1
+#define cpu_has_vtag_icache 0
+#define cpu_has_dc_aliases 0
+#define cpu_has_ic_fills_f_dc 0
+#define cpu_has_dsp 0
+#define cpu_icache_snoops_remote_store 0
+#define cpu_has_mipsmt 0
+#define cpu_has_userlocal 0
+
+#define cpu_has_nofpuex 0
+#define cpu_has_64bits 1
+
+#define cpu_has_mips32r1 0
+#define cpu_has_mips32r2 0
+#define cpu_has_mips64r1 0
+#define cpu_has_mips64r2 0
+
+#define cpu_has_inclusive_pcaches 0
+
+#define cpu_dcache_line_size() 32
+#define cpu_icache_line_size() 32
+#define cpu_scache_line_size() 32
+
+#endif /* __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-excite/excite.h b/arch/mips/include/asm/mach-excite/excite.h
new file mode 100644
index 00000000000..4c29ba44992
--- /dev/null
+++ b/arch/mips/include/asm/mach-excite/excite.h
@@ -0,0 +1,154 @@
+#ifndef __EXCITE_H__
+#define __EXCITE_H__
+
+#include <linux/init.h>
+#include <asm/addrspace.h>
+#include <asm/types.h>
+
+#define EXCITE_CPU_EXT_CLOCK 100000000
+
+#if !defined(__ASSEMBLY__)
+void __init excite_kgdb_init(void);
+void excite_procfs_init(void);
+extern unsigned long memsize;
+extern char modetty[];
+extern u32 unit_id;
+#endif
+
+/* Base name for XICAP devices */
+#define XICAP_NAME "xicap_gpi"
+
+/* OCD register offsets */
+#define LKB0 0x0038
+#define LKB5 0x0128
+#define LKM5 0x012C
+#define LKB7 0x0138
+#define LKM7 0x013c
+#define LKB8 0x0140
+#define LKM8 0x0144
+#define LKB9 0x0148
+#define LKM9 0x014c
+#define LKB10 0x0150
+#define LKM10 0x0154
+#define LKB11 0x0158
+#define LKM11 0x015c
+#define LKB12 0x0160
+#define LKM12 0x0164
+#define LKB13 0x0168
+#define LKM13 0x016c
+#define LDP0 0x0200
+#define LDP1 0x0210
+#define LDP2 0x0220
+#define LDP3 0x0230
+#define INTPIN0 0x0A40
+#define INTPIN1 0x0A44
+#define INTPIN2 0x0A48
+#define INTPIN3 0x0A4C
+#define INTPIN4 0x0A50
+#define INTPIN5 0x0A54
+#define INTPIN6 0x0A58
+#define INTPIN7 0x0A5C
+
+
+
+
+/* TITAN register offsets */
+#define CPRR 0x0004
+#define CPDSR 0x0008
+#define CPTC0R 0x000c
+#define CPTC1R 0x0010
+#define CPCFG0 0x0020
+#define CPCFG1 0x0024
+#define CPDST0A 0x0028
+#define CPDST0B 0x002c
+#define CPDST1A 0x0030
+#define CPDST1B 0x0034
+#define CPXDSTA 0x0038
+#define CPXDSTB 0x003c
+#define CPXCISRA 0x0048
+#define CPXCISRB 0x004c
+#define CPGIG0ER 0x0050
+#define CPGIG1ER 0x0054
+#define CPGRWL 0x0068
+#define CPURSLMT 0x00f8
+#define UACFG 0x0200
+#define UAINTS 0x0204
+#define SDRXFCIE 0x4828
+#define SDTXFCIE 0x4928
+#define INTP0Status0 0x1B00
+#define INTP0Mask0 0x1B04
+#define INTP0Set0 0x1B08
+#define INTP0Clear0 0x1B0C
+#define GXCFG 0x5000
+#define GXDMADRPFX 0x5018
+#define GXDMA_DESCADR 0x501c
+#define GXCH0TDESSTRT 0x5054
+
+/* IRQ definitions */
+#define NMICONFIG 0xac0
+#define TITAN_MSGINT 0xc4
+#define TITAN_IRQ ((TITAN_MSGINT / 0x20) + 2)
+#define FPGA0_MSGINT 0x5a
+#define FPGA0_IRQ ((FPGA0_MSGINT / 0x20) + 2)
+#define FPGA1_MSGINT 0x7b
+#define FPGA1_IRQ ((FPGA1_MSGINT / 0x20) + 2)
+#define PHY_MSGINT 0x9c
+#define PHY_IRQ ((PHY_MSGINT / 0x20) + 2)
+
+#if defined(CONFIG_BASLER_EXCITE_PROTOTYPE)
+/* Pre-release units used interrupt pin #9 */
+#define USB_IRQ 11
+#else
+/* Re-designed units use interrupt pin #1 */
+#define USB_MSGINT 0x39
+#define USB_IRQ ((USB_MSGINT / 0x20) + 2)
+#endif
+#define TIMER_IRQ 12
+
+
+/* Device address ranges */
+#define EXCITE_OFFS_OCD 0x1fffc000
+#define EXCITE_SIZE_OCD (16 * 1024)
+#define EXCITE_PHYS_OCD CPHYSADDR(EXCITE_OFFS_OCD)
+#define EXCITE_ADDR_OCD CKSEG1ADDR(EXCITE_OFFS_OCD)
+
+#define EXCITE_OFFS_SCRAM 0x1fffa000
+#define EXCITE_SIZE_SCRAM (8 << 10)
+#define EXCITE_PHYS_SCRAM CPHYSADDR(EXCITE_OFFS_SCRAM)
+#define EXCITE_ADDR_SCRAM CKSEG1ADDR(EXCITE_OFFS_SCRAM)
+
+#define EXCITE_OFFS_PCI_IO 0x1fff8000
+#define EXCITE_SIZE_PCI_IO (8 << 10)
+#define EXCITE_PHYS_PCI_IO CPHYSADDR(EXCITE_OFFS_PCI_IO)
+#define EXCITE_ADDR_PCI_IO CKSEG1ADDR(EXCITE_OFFS_PCI_IO)
+
+#define EXCITE_OFFS_TITAN 0x1fff0000
+#define EXCITE_SIZE_TITAN (32 << 10)
+#define EXCITE_PHYS_TITAN CPHYSADDR(EXCITE_OFFS_TITAN)
+#define EXCITE_ADDR_TITAN CKSEG1ADDR(EXCITE_OFFS_TITAN)
+
+#define EXCITE_OFFS_PCI_MEM 0x1ffe0000
+#define EXCITE_SIZE_PCI_MEM (64 << 10)
+#define EXCITE_PHYS_PCI_MEM CPHYSADDR(EXCITE_OFFS_PCI_MEM)
+#define EXCITE_ADDR_PCI_MEM CKSEG1ADDR(EXCITE_OFFS_PCI_MEM)
+
+#define EXCITE_OFFS_FPGA 0x1ffdc000
+#define EXCITE_SIZE_FPGA (16 << 10)
+#define EXCITE_PHYS_FPGA CPHYSADDR(EXCITE_OFFS_FPGA)
+#define EXCITE_ADDR_FPGA CKSEG1ADDR(EXCITE_OFFS_FPGA)
+
+#define EXCITE_OFFS_NAND 0x1ffd8000
+#define EXCITE_SIZE_NAND (16 << 10)
+#define EXCITE_PHYS_NAND CPHYSADDR(EXCITE_OFFS_NAND)
+#define EXCITE_ADDR_NAND CKSEG1ADDR(EXCITE_OFFS_NAND)
+
+#define EXCITE_OFFS_BOOTROM 0x1f000000
+#define EXCITE_SIZE_BOOTROM (8 << 20)
+#define EXCITE_PHYS_BOOTROM CPHYSADDR(EXCITE_OFFS_BOOTROM)
+#define EXCITE_ADDR_BOOTROM CKSEG1ADDR(EXCITE_OFFS_BOOTROM)
+
+/* FPGA address offsets */
+#define EXCITE_FPGA_DPR 0x0104 /* dual-ported ram */
+#define EXCITE_FPGA_SYSCTL 0x0200 /* system control register block */
+
+#endif /* __EXCITE_H__ */
diff --git a/arch/mips/include/asm/mach-excite/excite_fpga.h b/arch/mips/include/asm/mach-excite/excite_fpga.h
new file mode 100644
index 00000000000..0a1ef69bece
--- /dev/null
+++ b/arch/mips/include/asm/mach-excite/excite_fpga.h
@@ -0,0 +1,80 @@
+#ifndef EXCITE_FPGA_H_INCLUDED
+#define EXCITE_FPGA_H_INCLUDED
+
+
+/**
+ * Address alignment of the individual FPGA bytes.
+ * The address arrangement of the individual bytes of the FPGA is two
+ * byte aligned at the embedded MK2 platform.
+ */
+#ifdef EXCITE_CCI_FPGA_MK2
+typedef unsigned char excite_cci_fpga_align_t __attribute__ ((aligned(2)));
+#else
+typedef unsigned char excite_cci_fpga_align_t;
+#endif
+
+
+/**
+ * Size of Dual Ported RAM.
+ */
+#define EXCITE_DPR_SIZE 263
+
+
+/**
+ * Size of Reserved Status Fields in Dual Ported RAM.
+ */
+#define EXCITE_DPR_STATUS_SIZE 7
+
+
+
+/**
+ * FPGA.
+ * Hardware register layout of the FPGA interface. The FPGA must accessed
+ * byte wise solely.
+ * @see EXCITE_CCI_DPR_MK2
+ */
+typedef struct excite_fpga {
+
+ /**
+ * Dual Ported RAM.
+ */
+ excite_cci_fpga_align_t dpr[EXCITE_DPR_SIZE];
+
+ /**
+ * Status.
+ */
+ excite_cci_fpga_align_t status[EXCITE_DPR_STATUS_SIZE];
+
+#ifdef EXCITE_CCI_FPGA_MK2
+ /**
+ * RM9000 Interrupt.
+ * Write access initiates interrupt at the RM9000 (MIPS) processor of the eXcite.
+ */
+ excite_cci_fpga_align_t rm9k_int;
+#else
+ /**
+ * MK2 Interrupt.
+ * Write access initiates interrupt at the ARM processor of the MK2.
+ */
+ excite_cci_fpga_align_t mk2_int;
+
+ excite_cci_fpga_align_t gap[0x1000-0x10f];
+
+ /**
+ * IRQ Source/Acknowledge.
+ */
+ excite_cci_fpga_align_t rm9k_irq_src;
+
+ /**
+ * IRQ Mask.
+ * Set bits enable the related interrupt.
+ */
+ excite_cci_fpga_align_t rm9k_irq_mask;
+#endif
+
+
+} excite_fpga;
+
+
+
+#endif /* ndef EXCITE_FPGA_H_INCLUDED */
diff --git a/arch/mips/include/asm/mach-excite/excite_nandflash.h b/arch/mips/include/asm/mach-excite/excite_nandflash.h
new file mode 100644
index 00000000000..c4cf6140622
--- /dev/null
+++ b/arch/mips/include/asm/mach-excite/excite_nandflash.h
@@ -0,0 +1,7 @@
+#ifndef __EXCITE_NANDFLASH_H__
+#define __EXCITE_NANDFLASH_H__
+
+/* Resource names */
+#define EXCITE_NANDFLASH_RESOURCE_REGS "excite_nandflash_regs"
+
+#endif /* __EXCITE_NANDFLASH_H__ */
diff --git a/arch/mips/include/asm/mach-excite/rm9k_eth.h b/arch/mips/include/asm/mach-excite/rm9k_eth.h
new file mode 100644
index 00000000000..94705a46f72
--- /dev/null
+++ b/arch/mips/include/asm/mach-excite/rm9k_eth.h
@@ -0,0 +1,23 @@
+#if !defined(__RM9K_ETH_H__)
+#define __RM9K_ETH_H__
+
+#define RM9K_GE_NAME "rm9k_ge"
+
+/* Resource names */
+#define RM9K_GE_RESOURCE_MAC "rm9k_ge_mac"
+#define RM9K_GE_RESOURCE_MSTAT "rm9k_ge_mstat"
+#define RM9K_GE_RESOURCE_PKTPROC "rm9k_ge_pktproc"
+#define RM9K_GE_RESOURCE_XDMA "rm9k_ge_xdma"
+#define RM9K_GE_RESOURCE_FIFO_RX "rm9k_ge_fifo_rx"
+#define RM9K_GE_RESOURCE_FIFO_TX "rm9k_ge_fifo_tx"
+#define RM9K_GE_RESOURCE_FIFOMEM_RX "rm9k_ge_fifo_memory_rx"
+#define RM9K_GE_RESOURCE_FIFOMEM_TX "rm9k_ge_fifo_memory_tx"
+#define RM9K_GE_RESOURCE_PHY "rm9k_ge_phy"
+#define RM9K_GE_RESOURCE_DMADESC_RX "rm9k_ge_dmadesc_rx"
+#define RM9K_GE_RESOURCE_DMADESC_TX "rm9k_ge_dmadesc_tx"
+#define RM9K_GE_RESOURCE_IRQ_MAIN "rm9k_ge_irq_main"
+#define RM9K_GE_RESOURCE_IRQ_PHY "rm9k_ge_irq_phy"
+#define RM9K_GE_RESOURCE_GPI_SLICE "rm9k_ge_gpi_slice"
+#define RM9K_GE_RESOURCE_MDIO_CHANNEL "rm9k_ge_mdio_channel"
+
+#endif /* !defined(__RM9K_ETH_H__) */
diff --git a/arch/mips/include/asm/mach-excite/rm9k_wdt.h b/arch/mips/include/asm/mach-excite/rm9k_wdt.h
new file mode 100644
index 00000000000..3fa3c08d2da
--- /dev/null
+++ b/arch/mips/include/asm/mach-excite/rm9k_wdt.h
@@ -0,0 +1,12 @@
+#ifndef __RM9K_WDT_H__
+#define __RM9K_WDT_H__
+
+/* Device name */
+#define WDT_NAME "wdt_gpi"
+
+/* Resource names */
+#define WDT_RESOURCE_REGS "excite_watchdog_regs"
+#define WDT_RESOURCE_IRQ "excite_watchdog_irq"
+#define WDT_RESOURCE_COUNTER "excite_watchdog_counter"
+
+#endif /* __RM9K_WDT_H__ */
diff --git a/arch/mips/include/asm/mach-excite/rm9k_xicap.h b/arch/mips/include/asm/mach-excite/rm9k_xicap.h
new file mode 100644
index 00000000000..009577734a8
--- /dev/null
+++ b/arch/mips/include/asm/mach-excite/rm9k_xicap.h
@@ -0,0 +1,16 @@
+#ifndef __EXCITE_XICAP_H__
+#define __EXCITE_XICAP_H__
+
+
+/* Resource names */
+#define XICAP_RESOURCE_FIFO_RX "xicap_fifo_rx"
+#define XICAP_RESOURCE_FIFO_TX "xicap_fifo_tx"
+#define XICAP_RESOURCE_XDMA "xicap_xdma"
+#define XICAP_RESOURCE_DMADESC "xicap_dmadesc"
+#define XICAP_RESOURCE_PKTPROC "xicap_pktproc"
+#define XICAP_RESOURCE_IRQ "xicap_irq"
+#define XICAP_RESOURCE_GPI_SLICE "xicap_gpi_slice"
+#define XICAP_RESOURCE_FIFO_BLK "xicap_fifo_blocks"
+#define XICAP_RESOURCE_PKT_STREAM "xicap_pkt_stream"
+
+#endif /* __EXCITE_XICAP_H__ */
diff --git a/arch/mips/include/asm/mach-excite/war.h b/arch/mips/include/asm/mach-excite/war.h
new file mode 100644
index 00000000000..1f82180c159
--- /dev/null
+++ b/arch/mips/include/asm/mach-excite/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_EXCITE_WAR_H
+#define __ASM_MIPS_MACH_EXCITE_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 1
+#define ICACHE_REFILLS_WORKAROUND_WAR 1
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_EXCITE_WAR_H */
diff --git a/arch/mips/include/asm/mach-generic/cpu-feature-overrides.h b/arch/mips/include/asm/mach-generic/cpu-feature-overrides.h
new file mode 100644
index 00000000000..7c185bb06f1
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/cpu-feature-overrides.h
@@ -0,0 +1,13 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Ralf Baechle
+ */
+#ifndef __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H
+
+/* Intentionally empty file ... */
+
+#endif /* __ASM_MACH_GENERIC_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-generic/dma-coherence.h b/arch/mips/include/asm/mach-generic/dma-coherence.h
new file mode 100644
index 00000000000..76e04e7feb8
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/dma-coherence.h
@@ -0,0 +1,45 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org>
+ *
+ */
+#ifndef __ASM_MACH_GENERIC_DMA_COHERENCE_H
+#define __ASM_MACH_GENERIC_DMA_COHERENCE_H
+
+struct device;
+
+static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
+ size_t size)
+{
+ return virt_to_phys(addr);
+}
+
+static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
+ struct page *page)
+{
+ return page_to_phys(page);
+}
+
+static inline unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
+{
+ return dma_addr;
+}
+
+static inline void plat_unmap_dma_mem(dma_addr_t dma_addr)
+{
+}
+
+static inline int plat_device_is_coherent(struct device *dev)
+{
+#ifdef CONFIG_DMA_COHERENT
+ return 1;
+#endif
+#ifdef CONFIG_DMA_NONCOHERENT
+ return 0;
+#endif
+}
+
+#endif /* __ASM_MACH_GENERIC_DMA_COHERENCE_H */
diff --git a/arch/mips/include/asm/mach-generic/floppy.h b/arch/mips/include/asm/mach-generic/floppy.h
new file mode 100644
index 00000000000..001a8ce17c1
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/floppy.h
@@ -0,0 +1,139 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1997, 1998, 2003 by Ralf Baechle
+ */
+#ifndef __ASM_MACH_GENERIC_FLOPPY_H
+#define __ASM_MACH_GENERIC_FLOPPY_H
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+
+#include <asm/bootinfo.h>
+#include <asm/cachectl.h>
+#include <asm/dma.h>
+#include <asm/floppy.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/pgtable.h>
+
+/*
+ * How to access the FDC's registers.
+ */
+static inline unsigned char fd_inb(unsigned int port)
+{
+ return inb_p(port);
+}
+
+static inline void fd_outb(unsigned char value, unsigned int port)
+{
+ outb_p(value, port);
+}
+
+/*
+ * How to access the floppy DMA functions.
+ */
+static inline void fd_enable_dma(void)
+{
+ enable_dma(FLOPPY_DMA);
+}
+
+static inline void fd_disable_dma(void)
+{
+ disable_dma(FLOPPY_DMA);
+}
+
+static inline int fd_request_dma(void)
+{
+ return request_dma(FLOPPY_DMA, "floppy");
+}
+
+static inline void fd_free_dma(void)
+{
+ free_dma(FLOPPY_DMA);
+}
+
+static inline void fd_clear_dma_ff(void)
+{
+ clear_dma_ff(FLOPPY_DMA);
+}
+
+static inline void fd_set_dma_mode(char mode)
+{
+ set_dma_mode(FLOPPY_DMA, mode);
+}
+
+static inline void fd_set_dma_addr(char *addr)
+{
+ set_dma_addr(FLOPPY_DMA, (unsigned long) addr);
+}
+
+static inline void fd_set_dma_count(unsigned int count)
+{
+ set_dma_count(FLOPPY_DMA, count);
+}
+
+static inline int fd_get_dma_residue(void)
+{
+ return get_dma_residue(FLOPPY_DMA);
+}
+
+static inline void fd_enable_irq(void)
+{
+ enable_irq(FLOPPY_IRQ);
+}
+
+static inline void fd_disable_irq(void)
+{
+ disable_irq(FLOPPY_IRQ);
+}
+
+static inline int fd_request_irq(void)
+{
+ return request_irq(FLOPPY_IRQ, floppy_interrupt,
+ IRQF_DISABLED, "floppy", NULL);
+}
+
+static inline void fd_free_irq(void)
+{
+ free_irq(FLOPPY_IRQ, NULL);
+}
+
+#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL);
+
+
+static inline unsigned long fd_getfdaddr1(void)
+{
+ return 0x3f0;
+}
+
+static inline unsigned long fd_dma_mem_alloc(unsigned long size)
+{
+ unsigned long mem;
+
+ mem = __get_dma_pages(GFP_KERNEL, get_order(size));
+
+ return mem;
+}
+
+static inline void fd_dma_mem_free(unsigned long addr, unsigned long size)
+{
+ free_pages(addr, get_order(size));
+}
+
+static inline unsigned long fd_drive_type(unsigned long n)
+{
+ if (n == 0)
+ return 4; /* 3,5", 1.44mb */
+
+ return 0;
+}
+
+#endif /* __ASM_MACH_GENERIC_FLOPPY_H */
diff --git a/arch/mips/include/asm/mach-generic/gpio.h b/arch/mips/include/asm/mach-generic/gpio.h
new file mode 100644
index 00000000000..b4e70208da6
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/gpio.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_MACH_GENERIC_GPIO_H
+#define __ASM_MACH_GENERIC_GPIO_H
+
+#ifdef CONFIG_GPIOLIB
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#else
+int gpio_request(unsigned gpio, const char *label);
+void gpio_free(unsigned gpio);
+int gpio_direction_input(unsigned gpio);
+int gpio_direction_output(unsigned gpio, int value);
+int gpio_get_value(unsigned gpio);
+void gpio_set_value(unsigned gpio, int value);
+#endif
+int gpio_to_irq(unsigned gpio);
+int irq_to_gpio(unsigned irq);
+
+#include <asm-generic/gpio.h> /* cansleep wrappers */
+
+#endif /* __ASM_MACH_GENERIC_GPIO_H */
diff --git a/arch/mips/include/asm/mach-generic/ide.h b/arch/mips/include/asm/mach-generic/ide.h
new file mode 100644
index 00000000000..9c93a5b36f2
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/ide.h
@@ -0,0 +1,138 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994-1996 Linus Torvalds & authors
+ *
+ * Copied from i386; many of the especially older MIPS or ISA-based platforms
+ * are basically identical. Using this file probably implies i8259 PIC
+ * support in a system but the very least interrupt numbers 0 - 15 need to
+ * be put aside for legacy devices.
+ */
+#ifndef __ASM_MACH_GENERIC_IDE_H
+#define __ASM_MACH_GENERIC_IDE_H
+
+#ifdef __KERNEL__
+
+#include <linux/pci.h>
+#include <linux/stddef.h>
+#include <asm/processor.h>
+
+/* MIPS port and memory-mapped I/O string operations. */
+static inline void __ide_flush_prologue(void)
+{
+#ifdef CONFIG_SMP
+ if (cpu_has_dc_aliases)
+ preempt_disable();
+#endif
+}
+
+static inline void __ide_flush_epilogue(void)
+{
+#ifdef CONFIG_SMP
+ if (cpu_has_dc_aliases)
+ preempt_enable();
+#endif
+}
+
+static inline void __ide_flush_dcache_range(unsigned long addr, unsigned long size)
+{
+ if (cpu_has_dc_aliases) {
+ unsigned long end = addr + size;
+
+ while (addr < end) {
+ local_flush_data_cache_page((void *)addr);
+ addr += PAGE_SIZE;
+ }
+ }
+}
+
+/*
+ * insw() and gang might be called with interrupts disabled, so we can't
+ * send IPIs for flushing due to the potencial of deadlocks, see the comment
+ * above smp_call_function() in arch/mips/kernel/smp.c. We work around the
+ * problem by disabling preemption so we know we actually perform the flush
+ * on the processor that actually has the lines to be flushed which hopefully
+ * is even better for performance anyway.
+ */
+static inline void __ide_insw(unsigned long port, void *addr,
+ unsigned int count)
+{
+ __ide_flush_prologue();
+ insw(port, addr, count);
+ __ide_flush_dcache_range((unsigned long)addr, count * 2);
+ __ide_flush_epilogue();
+}
+
+static inline void __ide_insl(unsigned long port, void *addr, unsigned int count)
+{
+ __ide_flush_prologue();
+ insl(port, addr, count);
+ __ide_flush_dcache_range((unsigned long)addr, count * 4);
+ __ide_flush_epilogue();
+}
+
+static inline void __ide_outsw(unsigned long port, const void *addr,
+ unsigned long count)
+{
+ __ide_flush_prologue();
+ outsw(port, addr, count);
+ __ide_flush_dcache_range((unsigned long)addr, count * 2);
+ __ide_flush_epilogue();
+}
+
+static inline void __ide_outsl(unsigned long port, const void *addr,
+ unsigned long count)
+{
+ __ide_flush_prologue();
+ outsl(port, addr, count);
+ __ide_flush_dcache_range((unsigned long)addr, count * 4);
+ __ide_flush_epilogue();
+}
+
+static inline void __ide_mm_insw(void __iomem *port, void *addr, u32 count)
+{
+ __ide_flush_prologue();
+ readsw(port, addr, count);
+ __ide_flush_dcache_range((unsigned long)addr, count * 2);
+ __ide_flush_epilogue();
+}
+
+static inline void __ide_mm_insl(void __iomem *port, void *addr, u32 count)
+{
+ __ide_flush_prologue();
+ readsl(port, addr, count);
+ __ide_flush_dcache_range((unsigned long)addr, count * 4);
+ __ide_flush_epilogue();
+}
+
+static inline void __ide_mm_outsw(void __iomem *port, void *addr, u32 count)
+{
+ __ide_flush_prologue();
+ writesw(port, addr, count);
+ __ide_flush_dcache_range((unsigned long)addr, count * 2);
+ __ide_flush_epilogue();
+}
+
+static inline void __ide_mm_outsl(void __iomem * port, void *addr, u32 count)
+{
+ __ide_flush_prologue();
+ writesl(port, addr, count);
+ __ide_flush_dcache_range((unsigned long)addr, count * 4);
+ __ide_flush_epilogue();
+}
+
+/* ide_insw calls insw, not __ide_insw. Why? */
+#undef insw
+#undef insl
+#undef outsw
+#undef outsl
+#define insw(port, addr, count) __ide_insw(port, addr, count)
+#define insl(port, addr, count) __ide_insl(port, addr, count)
+#define outsw(port, addr, count) __ide_outsw(port, addr, count)
+#define outsl(port, addr, count) __ide_outsl(port, addr, count)
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_MACH_GENERIC_IDE_H */
diff --git a/arch/mips/include/asm/mach-generic/ioremap.h b/arch/mips/include/asm/mach-generic/ioremap.h
new file mode 100644
index 00000000000..b379938d47f
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/ioremap.h
@@ -0,0 +1,34 @@
+/*
+ * include/asm-mips/mach-generic/ioremap.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MACH_GENERIC_IOREMAP_H
+#define __ASM_MACH_GENERIC_IOREMAP_H
+
+#include <linux/types.h>
+
+/*
+ * Allow physical addresses to be fixed up to help peripherals located
+ * outside the low 32-bit range -- generic pass-through version.
+ */
+static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+{
+ return phys_addr;
+}
+
+static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size,
+ unsigned long flags)
+{
+ return NULL;
+}
+
+static inline int plat_iounmap(const volatile void __iomem *addr)
+{
+ return 0;
+}
+
+#endif /* __ASM_MACH_GENERIC_IOREMAP_H */
diff --git a/arch/mips/include/asm/mach-generic/irq.h b/arch/mips/include/asm/mach-generic/irq.h
new file mode 100644
index 00000000000..70d9a25132c
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/irq.h
@@ -0,0 +1,45 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 by Ralf Baechle
+ */
+#ifndef __ASM_MACH_GENERIC_IRQ_H
+#define __ASM_MACH_GENERIC_IRQ_H
+
+#ifndef NR_IRQS
+#define NR_IRQS 128
+#endif
+
+#ifdef CONFIG_I8259
+#ifndef I8259A_IRQ_BASE
+#define I8259A_IRQ_BASE 0
+#endif
+#endif
+
+#ifdef CONFIG_IRQ_CPU
+
+#ifndef MIPS_CPU_IRQ_BASE
+#ifdef CONFIG_I8259
+#define MIPS_CPU_IRQ_BASE 16
+#else
+#define MIPS_CPU_IRQ_BASE 0
+#endif /* CONFIG_I8259 */
+#endif
+
+#ifdef CONFIG_IRQ_CPU_RM7K
+#ifndef RM7K_CPU_IRQ_BASE
+#define RM7K_CPU_IRQ_BASE (MIPS_CPU_IRQ_BASE+8)
+#endif
+#endif
+
+#ifdef CONFIG_IRQ_CPU_RM9K
+#ifndef RM9K_CPU_IRQ_BASE
+#define RM9K_CPU_IRQ_BASE (MIPS_CPU_IRQ_BASE+12)
+#endif
+#endif
+
+#endif /* CONFIG_IRQ_CPU */
+
+#endif /* __ASM_MACH_GENERIC_IRQ_H */
diff --git a/arch/mips/include/asm/mach-generic/kernel-entry-init.h b/arch/mips/include/asm/mach-generic/kernel-entry-init.h
new file mode 100644
index 00000000000..7e66505fa57
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/kernel-entry-init.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Embedded Alley Solutions, Inc
+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_MACH_GENERIC_KERNEL_ENTRY_H
+#define __ASM_MACH_GENERIC_KERNEL_ENTRY_H
+
+/* Intentionally empty macro, used in head.S. Override in
+ * arch/mips/mach-xxx/kernel-entry-init.h when necessary.
+ */
+.macro kernel_entry_setup
+.endm
+
+/*
+ * Do SMP slave processor setup necessary before we can savely execute C code.
+ */
+ .macro smp_slave_setup
+ .endm
+
+
+#endif /* __ASM_MACH_GENERIC_KERNEL_ENTRY_H */
diff --git a/arch/mips/include/asm/mach-generic/kmalloc.h b/arch/mips/include/asm/mach-generic/kmalloc.h
new file mode 100644
index 00000000000..b8e6deba352
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/kmalloc.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_MACH_GENERIC_KMALLOC_H
+#define __ASM_MACH_GENERIC_KMALLOC_H
+
+
+#ifndef CONFIG_DMA_COHERENT
+/*
+ * Total overkill for most systems but need as a safe default.
+ * Set this one if any device in the system might do non-coherent DMA.
+ */
+#define ARCH_KMALLOC_MINALIGN 128
+#endif
+
+#endif /* __ASM_MACH_GENERIC_KMALLOC_H */
diff --git a/arch/mips/include/asm/mach-generic/mangle-port.h b/arch/mips/include/asm/mach-generic/mangle-port.h
new file mode 100644
index 00000000000..f49dc990214
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/mangle-port.h
@@ -0,0 +1,52 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ */
+#ifndef __ASM_MACH_GENERIC_MANGLE_PORT_H
+#define __ASM_MACH_GENERIC_MANGLE_PORT_H
+
+#define __swizzle_addr_b(port) (port)
+#define __swizzle_addr_w(port) (port)
+#define __swizzle_addr_l(port) (port)
+#define __swizzle_addr_q(port) (port)
+
+/*
+ * Sane hardware offers swapping of PCI/ISA I/O space accesses in hardware;
+ * less sane hardware forces software to fiddle with this...
+ *
+ * Regardless, if the host bus endianness mismatches that of PCI/ISA, then
+ * you can't have the numerical value of data and byte addresses within
+ * multibyte quantities both preserved at the same time. Hence two
+ * variations of functions: non-prefixed ones that preserve the value
+ * and prefixed ones that preserve byte addresses. The latters are
+ * typically used for moving raw data between a peripheral and memory (cf.
+ * string I/O functions), hence the "__mem_" prefix.
+ */
+#if defined(CONFIG_SWAP_IO_SPACE)
+
+# define ioswabb(a, x) (x)
+# define __mem_ioswabb(a, x) (x)
+# define ioswabw(a, x) le16_to_cpu(x)
+# define __mem_ioswabw(a, x) (x)
+# define ioswabl(a, x) le32_to_cpu(x)
+# define __mem_ioswabl(a, x) (x)
+# define ioswabq(a, x) le64_to_cpu(x)
+# define __mem_ioswabq(a, x) (x)
+
+#else
+
+# define ioswabb(a, x) (x)
+# define __mem_ioswabb(a, x) (x)
+# define ioswabw(a, x) (x)
+# define __mem_ioswabw(a, x) cpu_to_le16(x)
+# define ioswabl(a, x) (x)
+# define __mem_ioswabl(a, x) cpu_to_le32(x)
+# define ioswabq(a, x) (x)
+# define __mem_ioswabq(a, x) cpu_to_le32(x)
+
+#endif
+
+#endif /* __ASM_MACH_GENERIC_MANGLE_PORT_H */
diff --git a/arch/mips/include/asm/mach-generic/mc146818rtc.h b/arch/mips/include/asm/mach-generic/mc146818rtc.h
new file mode 100644
index 00000000000..0b9a942f079
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/mc146818rtc.h
@@ -0,0 +1,36 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2001, 03 by Ralf Baechle
+ *
+ * RTC routines for PC style attached Dallas chip.
+ */
+#ifndef __ASM_MACH_GENERIC_MC146818RTC_H
+#define __ASM_MACH_GENERIC_MC146818RTC_H
+
+#include <asm/io.h>
+
+#define RTC_PORT(x) (0x70 + (x))
+#define RTC_IRQ 8
+
+static inline unsigned char CMOS_READ(unsigned long addr)
+{
+ outb_p(addr, RTC_PORT(0));
+ return inb_p(RTC_PORT(1));
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
+{
+ outb_p(addr, RTC_PORT(0));
+ outb_p(data, RTC_PORT(1));
+}
+
+#define RTC_ALWAYS_BCD 1
+
+#ifndef mc146818_decode_year
+#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1900)
+#endif
+
+#endif /* __ASM_MACH_GENERIC_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mach-generic/spaces.h b/arch/mips/include/asm/mach-generic/spaces.h
new file mode 100644
index 00000000000..c9fa4b14968
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/spaces.h
@@ -0,0 +1,85 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle
+ * Copyright (C) 2000, 2002 Maciej W. Rozycki
+ * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_MACH_GENERIC_SPACES_H
+#define _ASM_MACH_GENERIC_SPACES_H
+
+#include <linux/const.h>
+
+/*
+ * This gives the physical RAM offset.
+ */
+#ifndef PHYS_OFFSET
+#define PHYS_OFFSET _AC(0, UL)
+#endif
+
+#ifdef CONFIG_32BIT
+
+#define CAC_BASE _AC(0x80000000, UL)
+#define IO_BASE _AC(0xa0000000, UL)
+#define UNCAC_BASE _AC(0xa0000000, UL)
+
+#ifndef MAP_BASE
+#define MAP_BASE _AC(0xc0000000, UL)
+#endif
+
+/*
+ * Memory above this physical address will be considered highmem.
+ */
+#ifndef HIGHMEM_START
+#define HIGHMEM_START _AC(0x20000000, UL)
+#endif
+
+#endif /* CONFIG_32BIT */
+
+#ifdef CONFIG_64BIT
+
+#ifndef CAC_BASE
+#ifdef CONFIG_DMA_NONCOHERENT
+#define CAC_BASE _AC(0x9800000000000000, UL)
+#else
+#define CAC_BASE _AC(0xa800000000000000, UL)
+#endif
+#endif
+
+#ifndef IO_BASE
+#define IO_BASE _AC(0x9000000000000000, UL)
+#endif
+
+#ifndef UNCAC_BASE
+#define UNCAC_BASE _AC(0x9000000000000000, UL)
+#endif
+
+#ifndef MAP_BASE
+#define MAP_BASE _AC(0xc000000000000000, UL)
+#endif
+
+/*
+ * Memory above this physical address will be considered highmem.
+ * Fixme: 59 bits is a fictive number and makes assumptions about processors
+ * in the distant future. Nobody will care for a few years :-)
+ */
+#ifndef HIGHMEM_START
+#define HIGHMEM_START (_AC(1, UL) << _AC(59, UL))
+#endif
+
+#define TO_PHYS(x) ( ((x) & TO_PHYS_MASK))
+#define TO_CAC(x) (CAC_BASE | ((x) & TO_PHYS_MASK))
+#define TO_UNCAC(x) (UNCAC_BASE | ((x) & TO_PHYS_MASK))
+
+#endif /* CONFIG_64BIT */
+
+/*
+ * This handles the memory map.
+ */
+#ifndef PAGE_OFFSET
+#define PAGE_OFFSET (CAC_BASE + PHYS_OFFSET)
+#endif
+
+#endif /* __ASM_MACH_GENERIC_SPACES_H */
diff --git a/arch/mips/include/asm/mach-generic/topology.h b/arch/mips/include/asm/mach-generic/topology.h
new file mode 100644
index 00000000000..5428f333a02
--- /dev/null
+++ b/arch/mips/include/asm/mach-generic/topology.h
@@ -0,0 +1 @@
+#include <asm-generic/topology.h>
diff --git a/arch/mips/include/asm/mach-ip22/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip22/cpu-feature-overrides.h
new file mode 100644
index 00000000000..9c8735158da
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip22/cpu-feature-overrides.h
@@ -0,0 +1,44 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 07 Ralf Baechle
+ */
+#ifndef __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * IP22 with a variety of processors so we can't use defaults for everything.
+ */
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_4k_cache 1
+#define cpu_has_fpu 1
+#define cpu_has_32fpr 1
+#define cpu_has_counter 1
+#define cpu_has_mips16 0
+#define cpu_has_divec 0
+#define cpu_has_cache_cdex_p 1
+#define cpu_has_prefetch 0
+#define cpu_has_mcheck 0
+#define cpu_has_ejtag 0
+
+#define cpu_has_llsc 1
+#define cpu_has_vtag_icache 0 /* Needs to change for R8000 */
+#define cpu_has_dc_aliases (PAGE_SIZE < 0x4000)
+#define cpu_has_ic_fills_f_dc 0
+
+#define cpu_has_dsp 0
+#define cpu_has_mipsmt 0
+#define cpu_has_userlocal 0
+
+#define cpu_has_nofpuex 0
+#define cpu_has_64bits 1
+
+#define cpu_has_mips32r1 0
+#define cpu_has_mips32r2 0
+#define cpu_has_mips64r1 0
+#define cpu_has_mips64r2 0
+
+#endif /* __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-ip22/spaces.h b/arch/mips/include/asm/mach-ip22/spaces.h
new file mode 100644
index 00000000000..7f9fa6f6605
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip22/spaces.h
@@ -0,0 +1,27 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle
+ * Copyright (C) 2000, 2002 Maciej W. Rozycki
+ * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_MACH_IP22_SPACES_H
+#define _ASM_MACH_IP22_SPACES_H
+
+
+#ifdef CONFIG_64BIT
+
+#define PAGE_OFFSET 0xffffffff80000000UL
+
+#define CAC_BASE 0xffffffff80000000
+#define IO_BASE 0xffffffffa0000000
+#define UNCAC_BASE 0xffffffffa0000000
+#define MAP_BASE 0xc000000000000000
+
+#endif /* CONFIG_64BIT */
+
+#include <asm/mach-generic/spaces.h>
+
+#endif /* __ASM_MACH_IP22_SPACES_H */
diff --git a/arch/mips/include/asm/mach-ip22/war.h b/arch/mips/include/asm/mach-ip22/war.h
new file mode 100644
index 00000000000..a44fa9656a8
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip22/war.h
@@ -0,0 +1,29 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_IP22_WAR_H
+#define __ASM_MIPS_MACH_IP22_WAR_H
+
+/*
+ * R4600 CPU modules for the Indy come with both V1.7 and V2.0 processors.
+ */
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 1
+#define R4600_V1_HIT_CACHEOP_WAR 1
+#define R4600_V2_HIT_CACHEOP_WAR 1
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_IP22_WAR_H */
diff --git a/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h
new file mode 100644
index 00000000000..7d3112b148d
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h
@@ -0,0 +1,54 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 07 Ralf Baechle
+ */
+#ifndef __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * IP27 only comes with R10000 family processors all using the same config
+ */
+#define cpu_has_watch 1
+#define cpu_has_mips16 0
+#define cpu_has_divec 0
+#define cpu_has_vce 0
+#define cpu_has_cache_cdex_p 0
+#define cpu_has_cache_cdex_s 0
+#define cpu_has_prefetch 1
+#define cpu_has_mcheck 0
+#define cpu_has_ejtag 0
+
+#define cpu_has_llsc 1
+#define cpu_has_vtag_icache 0
+#define cpu_has_dc_aliases 0
+#define cpu_has_ic_fills_f_dc 0
+#define cpu_has_dsp 0
+#define cpu_icache_snoops_remote_store 1
+#define cpu_has_mipsmt 0
+#define cpu_has_userlocal 0
+
+#define cpu_has_nofpuex 0
+#define cpu_has_64bits 1
+
+#define cpu_has_4kex 1
+#define cpu_has_3k_cache 0
+#define cpu_has_6k_cache 0
+#define cpu_has_4k_cache 1
+#define cpu_has_8k_cache 0
+#define cpu_has_tx39_cache 0
+
+#define cpu_has_inclusive_pcaches 1
+
+#define cpu_dcache_line_size() 32
+#define cpu_icache_line_size() 64
+#define cpu_scache_line_size() 128
+
+#define cpu_has_mips32r1 0
+#define cpu_has_mips32r2 0
+#define cpu_has_mips64r1 0
+#define cpu_has_mips64r2 0
+
+#endif /* __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-ip27/dma-coherence.h b/arch/mips/include/asm/mach-ip27/dma-coherence.h
new file mode 100644
index 00000000000..ed7e6222dc1
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip27/dma-coherence.h
@@ -0,0 +1,50 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org>
+ *
+ */
+#ifndef __ASM_MACH_IP27_DMA_COHERENCE_H
+#define __ASM_MACH_IP27_DMA_COHERENCE_H
+
+#include <asm/pci/bridge.h>
+
+#define pdev_to_baddr(pdev, addr) \
+ (BRIDGE_CONTROLLER(pdev->bus)->baddr + (addr))
+#define dev_to_baddr(dev, addr) \
+ pdev_to_baddr(to_pci_dev(dev), (addr))
+
+struct device;
+
+static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
+ size_t size)
+{
+ dma_addr_t pa = dev_to_baddr(dev, virt_to_phys(addr));
+
+ return pa;
+}
+
+static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page)
+{
+ dma_addr_t pa = dev_to_baddr(dev, page_to_phys(page));
+
+ return pa;
+}
+
+static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
+{
+ return dma_addr & ~(0xffUL << 56);
+}
+
+static inline void plat_unmap_dma_mem(dma_addr_t dma_addr)
+{
+}
+
+static inline int plat_device_is_coherent(struct device *dev)
+{
+ return 1; /* IP27 non-cohernet mode is unsupported */
+}
+
+#endif /* __ASM_MACH_IP27_DMA_COHERENCE_H */
diff --git a/arch/mips/include/asm/mach-ip27/irq.h b/arch/mips/include/asm/mach-ip27/irq.h
new file mode 100644
index 00000000000..cf4384bfa84
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip27/irq.h
@@ -0,0 +1,22 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999, 2000, 01, 02, 03 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2001 Kanoj Sarcar
+ */
+#ifndef __ASM_MACH_IP27_IRQ_H
+#define __ASM_MACH_IP27_IRQ_H
+
+/*
+ * A hardwired interrupt number is completly stupid for this system - a
+ * large configuration might have thousands if not tenthousands of
+ * interrupts.
+ */
+#define NR_IRQS 256
+
+#include_next <irq.h>
+
+#endif /* __ASM_MACH_IP27_IRQ_H */
diff --git a/arch/mips/include/asm/mach-ip27/kernel-entry-init.h b/arch/mips/include/asm/mach-ip27/kernel-entry-init.h
new file mode 100644
index 00000000000..624d66c7f29
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip27/kernel-entry-init.h
@@ -0,0 +1,59 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2005 Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MACH_IP27_KERNEL_ENTRY_H
+#define __ASM_MACH_IP27_KERNEL_ENTRY_H
+
+#include <asm/sn/addrs.h>
+#include <asm/sn/sn0/hubni.h>
+#include <asm/sn/klkernvars.h>
+
+/*
+ * Returns the local nasid into res.
+ */
+ .macro GET_NASID_ASM res
+ dli \res, LOCAL_HUB_ADDR(NI_STATUS_REV_ID)
+ ld \res, (\res)
+ and \res, NSRI_NODEID_MASK
+ dsrl \res, NSRI_NODEID_SHFT
+ .endm
+
+/*
+ * Intentionally empty macro, used in head.S. Override in
+ * arch/mips/mach-xxx/kernel-entry-init.h when necessary.
+ */
+ .macro kernel_entry_setup
+ GET_NASID_ASM t1
+ move t2, t1 # text and data are here
+ MAPPED_KERNEL_SETUP_TLB
+ .endm
+
+/*
+ * Do SMP slave processor setup necessary before we can savely execute C code.
+ */
+ .macro smp_slave_setup
+ GET_NASID_ASM t1
+ dli t0, KLDIR_OFFSET + (KLI_KERN_VARS * KLDIR_ENT_SIZE) + \
+ KLDIR_OFF_POINTER + CAC_BASE
+ dsll t1, NASID_SHFT
+ or t0, t0, t1
+ ld t0, 0(t0) # t0 points to kern_vars struct
+ lh t1, KV_RO_NASID_OFFSET(t0)
+ lh t2, KV_RW_NASID_OFFSET(t0)
+ MAPPED_KERNEL_SETUP_TLB
+
+ /*
+ * We might not get launched at the address the kernel is linked to,
+ * so we jump there.
+ */
+ PTR_LA t0, 0f
+ jr t0
+0:
+ .endm
+
+#endif /* __ASM_MACH_IP27_KERNEL_ENTRY_H */
diff --git a/arch/mips/include/asm/mach-ip27/kmalloc.h b/arch/mips/include/asm/mach-ip27/kmalloc.h
new file mode 100644
index 00000000000..426bd049b2d
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip27/kmalloc.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_MACH_IP27_KMALLOC_H
+#define __ASM_MACH_IP27_KMALLOC_H
+
+/*
+ * All happy, no need to define ARCH_KMALLOC_MINALIGN
+ */
+
+#endif /* __ASM_MACH_IP27_KMALLOC_H */
diff --git a/arch/mips/include/asm/mach-ip27/mangle-port.h b/arch/mips/include/asm/mach-ip27/mangle-port.h
new file mode 100644
index 00000000000..f6e4912ea06
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip27/mangle-port.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ */
+#ifndef __ASM_MACH_IP27_MANGLE_PORT_H
+#define __ASM_MACH_IP27_MANGLE_PORT_H
+
+#define __swizzle_addr_b(port) (port)
+#define __swizzle_addr_w(port) ((port) ^ 2)
+#define __swizzle_addr_l(port) (port)
+#define __swizzle_addr_q(port) (port)
+
+# define ioswabb(a, x) (x)
+# define __mem_ioswabb(a, x) (x)
+# define ioswabw(a, x) (x)
+# define __mem_ioswabw(a, x) cpu_to_le16(x)
+# define ioswabl(a, x) (x)
+# define __mem_ioswabl(a, x) cpu_to_le32(x)
+# define ioswabq(a, x) (x)
+# define __mem_ioswabq(a, x) cpu_to_le32(x)
+
+#endif /* __ASM_MACH_IP27_MANGLE_PORT_H */
diff --git a/arch/mips/include/asm/mach-ip27/mmzone.h b/arch/mips/include/asm/mach-ip27/mmzone.h
new file mode 100644
index 00000000000..986a3b9b59a
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip27/mmzone.h
@@ -0,0 +1,36 @@
+#ifndef _ASM_MACH_MMZONE_H
+#define _ASM_MACH_MMZONE_H
+
+#include <asm/sn/addrs.h>
+#include <asm/sn/arch.h>
+#include <asm/sn/hub.h>
+
+#define pa_to_nid(addr) NASID_TO_COMPACT_NODEID(NASID_GET(addr))
+
+#define LEVELS_PER_SLICE 128
+
+struct slice_data {
+ unsigned long irq_enable_mask[2];
+ int level_to_irq[LEVELS_PER_SLICE];
+};
+
+struct hub_data {
+ kern_vars_t kern_vars;
+ DECLARE_BITMAP(h_bigwin_used, HUB_NUM_BIG_WINDOW);
+ cpumask_t h_cpus;
+ unsigned long slice_map;
+ unsigned long irq_alloc_mask[2];
+ struct slice_data slice[2];
+};
+
+struct node_data {
+ struct pglist_data pglist;
+ struct hub_data hub;
+};
+
+extern struct node_data *__node_data[];
+
+#define NODE_DATA(n) (&__node_data[(n)]->pglist)
+#define hub_data(n) (&__node_data[(n)]->hub)
+
+#endif /* _ASM_MACH_MMZONE_H */
diff --git a/arch/mips/include/asm/mach-ip27/spaces.h b/arch/mips/include/asm/mach-ip27/spaces.h
new file mode 100644
index 00000000000..b18802a0b17
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip27/spaces.h
@@ -0,0 +1,30 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 99 Ralf Baechle
+ * Copyright (C) 2000, 2002 Maciej W. Rozycki
+ * Copyright (C) 1990, 1999 by Silicon Graphics, Inc.
+ */
+#ifndef _ASM_MACH_IP27_SPACES_H
+#define _ASM_MACH_IP27_SPACES_H
+
+/*
+ * IP27 uses the R10000's uncached attribute feature. Attribute 3 selects
+ * uncached memory addressing.
+ */
+
+#define HSPEC_BASE 0x9000000000000000
+#define IO_BASE 0x9200000000000000
+#define MSPEC_BASE 0x9400000000000000
+#define UNCAC_BASE 0x9600000000000000
+
+#define TO_MSPEC(x) (MSPEC_BASE | ((x) & TO_PHYS_MASK))
+#define TO_HSPEC(x) (HSPEC_BASE | ((x) & TO_PHYS_MASK))
+
+#define HIGHMEM_START (~0UL)
+
+#include <asm/mach-generic/spaces.h>
+
+#endif /* _ASM_MACH_IP27_SPACES_H */
diff --git a/arch/mips/include/asm/mach-ip27/topology.h b/arch/mips/include/asm/mach-ip27/topology.h
new file mode 100644
index 00000000000..7785bec732f
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip27/topology.h
@@ -0,0 +1,59 @@
+#ifndef _ASM_MACH_TOPOLOGY_H
+#define _ASM_MACH_TOPOLOGY_H 1
+
+#include <asm/sn/hub.h>
+#include <asm/sn/types.h>
+#include <asm/mmzone.h>
+
+struct cpuinfo_ip27 {
+// cpuid_t p_cpuid; /* PROM assigned cpuid */
+ cnodeid_t p_nodeid; /* my node ID in compact-id-space */
+ nasid_t p_nasid; /* my node ID in numa-as-id-space */
+ unsigned char p_slice; /* Physical position on node board */
+#if 0
+ unsigned long loops_per_sec;
+ unsigned long ipi_count;
+ unsigned long irq_attempt[NR_IRQS];
+ unsigned long smp_local_irq_count;
+ unsigned long prof_multiplier;
+ unsigned long prof_counter;
+#endif
+};
+
+extern struct cpuinfo_ip27 sn_cpu_info[NR_CPUS];
+
+#define cpu_to_node(cpu) (sn_cpu_info[(cpu)].p_nodeid)
+#define parent_node(node) (node)
+#define node_to_cpumask(node) (hub_data(node)->h_cpus)
+#define node_to_first_cpu(node) (first_cpu(node_to_cpumask(node)))
+struct pci_bus;
+extern int pcibus_to_node(struct pci_bus *);
+
+#define pcibus_to_cpumask(bus) (cpu_online_map)
+
+extern unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES];
+
+#define node_distance(from, to) (__node_distances[(from)][(to)])
+
+/* sched_domains SD_NODE_INIT for SGI IP27 machines */
+#define SD_NODE_INIT (struct sched_domain) { \
+ .span = CPU_MASK_NONE, \
+ .parent = NULL, \
+ .child = NULL, \
+ .groups = NULL, \
+ .min_interval = 8, \
+ .max_interval = 32, \
+ .busy_factor = 32, \
+ .imbalance_pct = 125, \
+ .cache_nice_tries = 1, \
+ .flags = SD_LOAD_BALANCE \
+ | SD_BALANCE_EXEC \
+ | SD_WAKE_BALANCE, \
+ .last_balance = jiffies, \
+ .balance_interval = 1, \
+ .nr_balance_failed = 0, \
+}
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_MACH_TOPOLOGY_H */
diff --git a/arch/mips/include/asm/mach-ip27/war.h b/arch/mips/include/asm/mach-ip27/war.h
new file mode 100644
index 00000000000..e2ddcc9b1ff
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip27/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_IP27_WAR_H
+#define __ASM_MIPS_MACH_IP27_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 1
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_IP27_WAR_H */
diff --git a/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h
new file mode 100644
index 00000000000..9a53b326f84
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h
@@ -0,0 +1,50 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Ralf Baechle
+ * 6/2004 pf
+ */
+#ifndef __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * IP28 only comes with R10000 family processors all using the same config
+ */
+#define cpu_has_watch 1
+#define cpu_has_mips16 0
+#define cpu_has_divec 0
+#define cpu_has_vce 0
+#define cpu_has_cache_cdex_p 0
+#define cpu_has_cache_cdex_s 0
+#define cpu_has_prefetch 1
+#define cpu_has_mcheck 0
+#define cpu_has_ejtag 0
+
+#define cpu_has_llsc 1
+#define cpu_has_vtag_icache 0
+#define cpu_has_dc_aliases 0 /* see probe_pcache() */
+#define cpu_has_ic_fills_f_dc 0
+#define cpu_has_dsp 0
+#define cpu_icache_snoops_remote_store 1
+#define cpu_has_mipsmt 0
+#define cpu_has_userlocal 0
+
+#define cpu_has_nofpuex 0
+#define cpu_has_64bits 1
+
+#define cpu_has_4kex 1
+#define cpu_has_4k_cache 1
+
+#define cpu_has_inclusive_pcaches 1
+
+#define cpu_dcache_line_size() 32
+#define cpu_icache_line_size() 64
+
+#define cpu_has_mips32r1 0
+#define cpu_has_mips32r2 0
+#define cpu_has_mips64r1 0
+#define cpu_has_mips64r2 0
+
+#endif /* __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-ip28/spaces.h b/arch/mips/include/asm/mach-ip28/spaces.h
new file mode 100644
index 00000000000..05aabb27e5e
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip28/spaces.h
@@ -0,0 +1,22 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle
+ * Copyright (C) 2000, 2002 Maciej W. Rozycki
+ * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc.
+ * 2004 pf
+ */
+#ifndef _ASM_MACH_IP28_SPACES_H
+#define _ASM_MACH_IP28_SPACES_H
+
+#define CAC_BASE 0xa800000000000000
+
+#define HIGHMEM_START (~0UL)
+
+#define PHYS_OFFSET _AC(0x20000000, UL)
+
+#include <asm/mach-generic/spaces.h>
+
+#endif /* _ASM_MACH_IP28_SPACES_H */
diff --git a/arch/mips/include/asm/mach-ip28/war.h b/arch/mips/include/asm/mach-ip28/war.h
new file mode 100644
index 00000000000..a1baafab486
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip28/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_IP28_WAR_H
+#define __ASM_MIPS_MACH_IP28_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 1
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_IP28_WAR_H */
diff --git a/arch/mips/include/asm/mach-ip32/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip32/cpu-feature-overrides.h
new file mode 100644
index 00000000000..6782fccebe8
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip32/cpu-feature-overrides.h
@@ -0,0 +1,50 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Ilya A. Volynets-Evenbakh
+ * Copyright (C) 2005, 07 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_MACH_IP32_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_IP32_CPU_FEATURE_OVERRIDES_H
+
+
+/*
+ * R5000 has an interesting "restriction": ll(d)/sc(d)
+ * instructions to XKPHYS region simply do uncached bus
+ * requests. This breaks all the atomic bitops functions.
+ * so, for 64bit IP32 kernel we just don't use ll/sc.
+ * This does not affect luserland.
+ */
+#if (defined(CONFIG_CPU_R5000) || defined(CONFIG_CPU_NEVADA)) && defined(CONFIG_64BIT)
+#define cpu_has_llsc 0
+#else
+#define cpu_has_llsc 1
+#endif
+
+/* Settings which are common for all ip32 CPUs */
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_fpu 1
+#define cpu_has_32fpr 1
+#define cpu_has_counter 1
+#define cpu_has_mips16 0
+#define cpu_has_vce 0
+#define cpu_has_cache_cdex_s 0
+#define cpu_has_mcheck 0
+#define cpu_has_ejtag 0
+#define cpu_has_vtag_icache 0
+#define cpu_has_ic_fills_f_dc 0
+#define cpu_has_dsp 0
+#define cpu_has_4k_cache 1
+#define cpu_has_mipsmt 0
+#define cpu_has_userlocal 0
+
+
+#define cpu_has_mips32r1 0
+#define cpu_has_mips32r2 0
+#define cpu_has_mips64r1 0
+#define cpu_has_mips64r2 0
+
+#endif /* __ASM_MACH_IP32_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-ip32/dma-coherence.h b/arch/mips/include/asm/mach-ip32/dma-coherence.h
new file mode 100644
index 00000000000..a5511ebb2d5
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip32/dma-coherence.h
@@ -0,0 +1,72 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org>
+ *
+ */
+#ifndef __ASM_MACH_IP32_DMA_COHERENCE_H
+#define __ASM_MACH_IP32_DMA_COHERENCE_H
+
+#include <asm/ip32/crime.h>
+
+struct device;
+
+/*
+ * Few notes.
+ * 1. CPU sees memory as two chunks: 0-256M@0x0, and the rest @0x40000000+256M
+ * 2. PCI sees memory as one big chunk @0x0 (or we could use 0x40000000 for
+ * native-endian)
+ * 3. All other devices see memory as one big chunk at 0x40000000
+ * 4. Non-PCI devices will pass NULL as struct device*
+ *
+ * Thus we translate differently, depending on device.
+ */
+
+#define RAM_OFFSET_MASK 0x3fffffffUL
+
+static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
+ size_t size)
+{
+ dma_addr_t pa = virt_to_phys(addr) & RAM_OFFSET_MASK;
+
+ if (dev == NULL)
+ pa += CRIME_HI_MEM_BASE;
+
+ return pa;
+}
+
+static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page)
+{
+ dma_addr_t pa;
+
+ pa = page_to_phys(page) & RAM_OFFSET_MASK;
+
+ if (dev == NULL)
+ pa += CRIME_HI_MEM_BASE;
+
+ return pa;
+}
+
+/* This is almost certainly wrong but it's what dma-ip32.c used to use */
+static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
+{
+ unsigned long addr = dma_addr & RAM_OFFSET_MASK;
+
+ if (dma_addr >= 256*1024*1024)
+ addr += CRIME_HI_MEM_BASE;
+
+ return addr;
+}
+
+static inline void plat_unmap_dma_mem(dma_addr_t dma_addr)
+{
+}
+
+static inline int plat_device_is_coherent(struct device *dev)
+{
+ return 0; /* IP32 is non-cohernet */
+}
+
+#endif /* __ASM_MACH_IP32_DMA_COHERENCE_H */
diff --git a/arch/mips/include/asm/mach-ip32/kmalloc.h b/arch/mips/include/asm/mach-ip32/kmalloc.h
new file mode 100644
index 00000000000..b1e0be60f72
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip32/kmalloc.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_MACH_IP32_KMALLOC_H
+#define __ASM_MACH_IP32_KMALLOC_H
+
+
+#if defined(CONFIG_CPU_R5000) || defined(CONFIG_CPU_RM7000)
+#define ARCH_KMALLOC_MINALIGN 32
+#else
+#define ARCH_KMALLOC_MINALIGN 128
+#endif
+
+#endif /* __ASM_MACH_IP32_KMALLOC_H */
diff --git a/arch/mips/include/asm/mach-ip32/mangle-port.h b/arch/mips/include/asm/mach-ip32/mangle-port.h
new file mode 100644
index 00000000000..f1d0f1756a9
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip32/mangle-port.h
@@ -0,0 +1,26 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Ladislav Michl
+ * Copyright (C) 2004 Ralf Baechle
+ */
+#ifndef __ASM_MACH_IP32_MANGLE_PORT_H
+#define __ASM_MACH_IP32_MANGLE_PORT_H
+
+#define __swizzle_addr_b(port) ((port) ^ 3)
+#define __swizzle_addr_w(port) ((port) ^ 2)
+#define __swizzle_addr_l(port) (port)
+#define __swizzle_addr_q(port) (port)
+
+# define ioswabb(a, x) (x)
+# define __mem_ioswabb(a, x) (x)
+# define ioswabw(a, x) (x)
+# define __mem_ioswabw(a, x) cpu_to_le16(x)
+# define ioswabl(a, x) (x)
+# define __mem_ioswabl(a, x) cpu_to_le32(x)
+# define ioswabq(a, x) (x)
+# define __mem_ioswabq(a, x) cpu_to_le32(x)
+
+#endif /* __ASM_MACH_IP32_MANGLE_PORT_H */
diff --git a/arch/mips/include/asm/mach-ip32/mc146818rtc.h b/arch/mips/include/asm/mach-ip32/mc146818rtc.h
new file mode 100644
index 00000000000..c28ba8d8407
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip32/mc146818rtc.h
@@ -0,0 +1,36 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2001, 03 by Ralf Baechle
+ * Copyright (C) 2000 Harald Koerfgen
+ *
+ * RTC routines for IP32 style attached Dallas chip.
+ */
+#ifndef __ASM_MACH_IP32_MC146818RTC_H
+#define __ASM_MACH_IP32_MC146818RTC_H
+
+#include <asm/ip32/mace.h>
+
+#define RTC_PORT(x) (0x70 + (x))
+
+static unsigned char CMOS_READ(unsigned long addr)
+{
+ return mace->isa.rtc[addr << 8];
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
+{
+ mace->isa.rtc[addr << 8] = data;
+}
+
+/*
+ * FIXME: Do it right. For now just assume that noone lives in 20th century
+ * and no O2 user in 22th century ;-)
+ */
+#define mc146818_decode_year(year) ((year) + 2000)
+
+#define RTC_ALWAYS_BCD 0
+
+#endif /* __ASM_MACH_IP32_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mach-ip32/war.h b/arch/mips/include/asm/mach-ip32/war.h
new file mode 100644
index 00000000000..d194056dcd7
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip32/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_IP32_WAR_H
+#define __ASM_MIPS_MACH_IP32_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 1
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_IP32_WAR_H */
diff --git a/arch/mips/include/asm/mach-jazz/dma-coherence.h b/arch/mips/include/asm/mach-jazz/dma-coherence.h
new file mode 100644
index 00000000000..d66979a124a
--- /dev/null
+++ b/arch/mips/include/asm/mach-jazz/dma-coherence.h
@@ -0,0 +1,40 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MACH_JAZZ_DMA_COHERENCE_H
+#define __ASM_MACH_JAZZ_DMA_COHERENCE_H
+
+#include <asm/jazzdma.h>
+
+struct device;
+
+static dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size)
+{
+ return vdma_alloc(virt_to_phys(addr), size);
+}
+
+static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page)
+{
+ return vdma_alloc(page_to_phys(page), PAGE_SIZE);
+}
+
+static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
+{
+ return vdma_log2phys(dma_addr);
+}
+
+static void plat_unmap_dma_mem(dma_addr_t dma_addr)
+{
+ vdma_free(dma_addr);
+}
+
+static inline int plat_device_is_coherent(struct device *dev)
+{
+ return 0;
+}
+
+#endif /* __ASM_MACH_JAZZ_DMA_COHERENCE_H */
diff --git a/arch/mips/include/asm/mach-jazz/floppy.h b/arch/mips/include/asm/mach-jazz/floppy.h
new file mode 100644
index 00000000000..56e9ca6ae42
--- /dev/null
+++ b/arch/mips/include/asm/mach-jazz/floppy.h
@@ -0,0 +1,135 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2003 by Ralf Baechle
+ */
+#ifndef __ASM_MACH_JAZZ_FLOPPY_H
+#define __ASM_MACH_JAZZ_FLOPPY_H
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <asm/addrspace.h>
+#include <asm/jazz.h>
+#include <asm/jazzdma.h>
+#include <asm/pgtable.h>
+
+static inline unsigned char fd_inb(unsigned int port)
+{
+ unsigned char c;
+
+ c = *(volatile unsigned char *) port;
+ udelay(1);
+
+ return c;
+}
+
+static inline void fd_outb(unsigned char value, unsigned int port)
+{
+ *(volatile unsigned char *) port = value;
+}
+
+/*
+ * How to access the floppy DMA functions.
+ */
+static inline void fd_enable_dma(void)
+{
+ vdma_enable(JAZZ_FLOPPY_DMA);
+}
+
+static inline void fd_disable_dma(void)
+{
+ vdma_disable(JAZZ_FLOPPY_DMA);
+}
+
+static inline int fd_request_dma(void)
+{
+ return 0;
+}
+
+static inline void fd_free_dma(void)
+{
+}
+
+static inline void fd_clear_dma_ff(void)
+{
+}
+
+static inline void fd_set_dma_mode(char mode)
+{
+ vdma_set_mode(JAZZ_FLOPPY_DMA, mode);
+}
+
+static inline void fd_set_dma_addr(char *a)
+{
+ vdma_set_addr(JAZZ_FLOPPY_DMA, vdma_phys2log(CPHYSADDR((unsigned long)a)));
+}
+
+static inline void fd_set_dma_count(unsigned int count)
+{
+ vdma_set_count(JAZZ_FLOPPY_DMA, count);
+}
+
+static inline int fd_get_dma_residue(void)
+{
+ return vdma_get_residue(JAZZ_FLOPPY_DMA);
+}
+
+static inline void fd_enable_irq(void)
+{
+}
+
+static inline void fd_disable_irq(void)
+{
+}
+
+static inline int fd_request_irq(void)
+{
+ return request_irq(FLOPPY_IRQ, floppy_interrupt,
+ IRQF_DISABLED, "floppy", NULL);
+}
+
+static inline void fd_free_irq(void)
+{
+ free_irq(FLOPPY_IRQ, NULL);
+}
+
+static inline unsigned long fd_getfdaddr1(void)
+{
+ return JAZZ_FDC_BASE;
+}
+
+static inline unsigned long fd_dma_mem_alloc(unsigned long size)
+{
+ unsigned long mem;
+
+ mem = __get_dma_pages(GFP_KERNEL, get_order(size));
+ if(!mem)
+ return 0;
+ vdma_alloc(CPHYSADDR(mem), size); /* XXX error checking */
+
+ return mem;
+}
+
+static inline void fd_dma_mem_free(unsigned long addr, unsigned long size)
+{
+ vdma_free(vdma_phys2log(CPHYSADDR(addr)));
+ free_pages(addr, get_order(size));
+}
+
+static inline unsigned long fd_drive_type(unsigned long n)
+{
+ /* XXX This is wrong for machines with ED 2.88mb disk drives like the
+ Olivetti M700. Anyway, we should suck this from the ARC
+ firmware. */
+ if (n == 0)
+ return 4; /* 3,5", 1.44mb */
+
+ return 0;
+}
+
+#endif /* __ASM_MACH_JAZZ_FLOPPY_H */
diff --git a/arch/mips/include/asm/mach-jazz/mc146818rtc.h b/arch/mips/include/asm/mach-jazz/mc146818rtc.h
new file mode 100644
index 00000000000..987f727afe2
--- /dev/null
+++ b/arch/mips/include/asm/mach-jazz/mc146818rtc.h
@@ -0,0 +1,38 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2001, 03 by Ralf Baechle
+ * Copyright (C) 2007 Thomas Bogendoerfer
+ *
+ * RTC routines for Jazz style attached Dallas chip.
+ */
+#ifndef __ASM_MACH_JAZZ_MC146818RTC_H
+#define __ASM_MACH_JAZZ_MC146818RTC_H
+
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/jazz.h>
+
+#define RTC_PORT(x) (0x70 + (x))
+#define RTC_IRQ 8
+
+static inline unsigned char CMOS_READ(unsigned long addr)
+{
+ outb_p(addr, RTC_PORT(0));
+ return *(volatile char *)JAZZ_RTC_BASE;
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
+{
+ outb_p(addr, RTC_PORT(0));
+ *(volatile char *)JAZZ_RTC_BASE = data;
+}
+
+#define RTC_ALWAYS_BCD 0
+
+#define mc146818_decode_year(year) ((year) + 1980)
+
+#endif /* __ASM_MACH_JAZZ_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mach-jazz/war.h b/arch/mips/include/asm/mach-jazz/war.h
new file mode 100644
index 00000000000..6158ee861bf
--- /dev/null
+++ b/arch/mips/include/asm/mach-jazz/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_JAZZ_WAR_H
+#define __ASM_MIPS_MACH_JAZZ_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_JAZZ_WAR_H */
diff --git a/arch/mips/include/asm/mach-lasat/irq.h b/arch/mips/include/asm/mach-lasat/irq.h
new file mode 100644
index 00000000000..3a282419d5f
--- /dev/null
+++ b/arch/mips/include/asm/mach-lasat/irq.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_MACH_LASAT_IRQ_H
+#define _ASM_MACH_LASAT_IRQ_H
+
+#define LASAT_CASCADE_IRQ (MIPS_CPU_IRQ_BASE + 2)
+
+#define LASAT_IRQ_BASE 8
+#define LASAT_IRQ_END 23
+
+#define NR_IRQS 24
+
+#include_next <irq.h>
+
+#endif /* _ASM_MACH_LASAT_IRQ_H */
diff --git a/arch/mips/include/asm/mach-lasat/mach-gt64120.h b/arch/mips/include/asm/mach-lasat/mach-gt64120.h
new file mode 100644
index 00000000000..1a9ad45cc13
--- /dev/null
+++ b/arch/mips/include/asm/mach-lasat/mach-gt64120.h
@@ -0,0 +1,27 @@
+/*
+ * This is a direct copy of the ev96100.h file, with a global
+ * search and replace. The numbers are the same.
+ *
+ * The reason I'm duplicating this is so that the 64120/96100
+ * defines won't be confusing in the source code.
+ */
+#ifndef _ASM_GT64120_LASAT_GT64120_DEP_H
+#define _ASM_GT64120_LASAT_GT64120_DEP_H
+
+/*
+ * GT64120 config space base address on Lasat 100
+ */
+#define GT64120_BASE (KSEG1ADDR(0x14000000))
+
+/*
+ * PCI Bus allocation
+ *
+ * (Guessing ...)
+ */
+#define GT_PCI_MEM_BASE 0x12000000UL
+#define GT_PCI_MEM_SIZE 0x02000000UL
+#define GT_PCI_IO_BASE 0x10000000UL
+#define GT_PCI_IO_SIZE 0x02000000UL
+#define GT_ISA_IO_BASE PCI_IO_BASE
+
+#endif /* _ASM_GT64120_LASAT_GT64120_DEP_H */
diff --git a/arch/mips/include/asm/mach-lasat/war.h b/arch/mips/include/asm/mach-lasat/war.h
new file mode 100644
index 00000000000..bb1e0325c9b
--- /dev/null
+++ b/arch/mips/include/asm/mach-lasat/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_LASAT_WAR_H
+#define __ASM_MIPS_MACH_LASAT_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_LASAT_WAR_H */
diff --git a/arch/mips/include/asm/mach-lemote/dma-coherence.h b/arch/mips/include/asm/mach-lemote/dma-coherence.h
new file mode 100644
index 00000000000..7e914777ebc
--- /dev/null
+++ b/arch/mips/include/asm/mach-lemote/dma-coherence.h
@@ -0,0 +1,42 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006, 07 Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ */
+#ifndef __ASM_MACH_LEMOTE_DMA_COHERENCE_H
+#define __ASM_MACH_LEMOTE_DMA_COHERENCE_H
+
+struct device;
+
+static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
+ size_t size)
+{
+ return virt_to_phys(addr) | 0x80000000;
+}
+
+static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
+ struct page *page)
+{
+ return page_to_phys(page) | 0x80000000;
+}
+
+static inline unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
+{
+ return dma_addr & 0x7fffffff;
+}
+
+static inline void plat_unmap_dma_mem(dma_addr_t dma_addr)
+{
+}
+
+static inline int plat_device_is_coherent(struct device *dev)
+{
+ return 0;
+}
+
+#endif /* __ASM_MACH_LEMOTE_DMA_COHERENCE_H */
diff --git a/arch/mips/include/asm/mach-lemote/mc146818rtc.h b/arch/mips/include/asm/mach-lemote/mc146818rtc.h
new file mode 100644
index 00000000000..ed5147e1108
--- /dev/null
+++ b/arch/mips/include/asm/mach-lemote/mc146818rtc.h
@@ -0,0 +1,36 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2001, 03, 07 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * RTC routines for PC style attached Dallas chip.
+ */
+#ifndef __ASM_MACH_LEMOTE_MC146818RTC_H
+#define __ASM_MACH_LEMOTE_MC146818RTC_H
+
+#include <linux/io.h>
+
+#define RTC_PORT(x) (0x70 + (x))
+#define RTC_IRQ 8
+
+static inline unsigned char CMOS_READ(unsigned long addr)
+{
+ outb_p(addr, RTC_PORT(0));
+ return inb_p(RTC_PORT(1));
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
+{
+ outb_p(addr, RTC_PORT(0));
+ outb_p(data, RTC_PORT(1));
+}
+
+#define RTC_ALWAYS_BCD 0
+
+#ifndef mc146818_decode_year
+#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1970)
+#endif
+
+#endif /* __ASM_MACH_LEMOTE_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mach-lemote/war.h b/arch/mips/include/asm/mach-lemote/war.h
new file mode 100644
index 00000000000..05f89e0f2a1
--- /dev/null
+++ b/arch/mips/include/asm/mach-lemote/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_LEMOTE_WAR_H
+#define __ASM_MIPS_MACH_LEMOTE_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_LEMOTE_WAR_H */
diff --git a/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h b/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h
new file mode 100644
index 00000000000..7f3e3f9bd23
--- /dev/null
+++ b/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h
@@ -0,0 +1,72 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Chris Dearman
+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H
+
+
+/*
+ * CPU feature overrides for MIPS boards
+ */
+#ifdef CONFIG_CPU_MIPS32
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_4k_cache 1
+/* #define cpu_has_fpu ? */
+/* #define cpu_has_32fpr ? */
+#define cpu_has_counter 1
+/* #define cpu_has_watch ? */
+#define cpu_has_divec 1
+#define cpu_has_vce 0
+/* #define cpu_has_cache_cdex_p ? */
+/* #define cpu_has_cache_cdex_s ? */
+/* #define cpu_has_prefetch ? */
+#define cpu_has_mcheck 1
+/* #define cpu_has_ejtag ? */
+#ifdef CONFIG_CPU_HAS_LLSC
+#define cpu_has_llsc 1
+#else
+#define cpu_has_llsc 0
+#endif
+/* #define cpu_has_vtag_icache ? */
+/* #define cpu_has_dc_aliases ? */
+/* #define cpu_has_ic_fills_f_dc ? */
+#define cpu_has_nofpuex 0
+/* #define cpu_has_64bits ? */
+/* #define cpu_has_64bit_zero_reg ? */
+/* #define cpu_has_inclusive_pcaches ? */
+#define cpu_icache_snoops_remote_store 1
+#endif
+
+#ifdef CONFIG_CPU_MIPS64
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_4k_cache 1
+/* #define cpu_has_fpu ? */
+/* #define cpu_has_32fpr ? */
+#define cpu_has_counter 1
+/* #define cpu_has_watch ? */
+#define cpu_has_divec 1
+#define cpu_has_vce 0
+/* #define cpu_has_cache_cdex_p ? */
+/* #define cpu_has_cache_cdex_s ? */
+/* #define cpu_has_prefetch ? */
+#define cpu_has_mcheck 1
+/* #define cpu_has_ejtag ? */
+#define cpu_has_llsc 1
+/* #define cpu_has_vtag_icache ? */
+/* #define cpu_has_dc_aliases ? */
+/* #define cpu_has_ic_fills_f_dc ? */
+#define cpu_has_nofpuex 0
+/* #define cpu_has_64bits ? */
+/* #define cpu_has_64bit_zero_reg ? */
+/* #define cpu_has_inclusive_pcaches ? */
+#define cpu_icache_snoops_remote_store 1
+#endif
+
+#endif /* __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-malta/irq.h b/arch/mips/include/asm/mach-malta/irq.h
new file mode 100644
index 00000000000..9b9da26683c
--- /dev/null
+++ b/arch/mips/include/asm/mach-malta/irq.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_MACH_MIPS_IRQ_H
+#define __ASM_MACH_MIPS_IRQ_H
+
+
+#define NR_IRQS 256
+
+#include_next <irq.h>
+
+#endif /* __ASM_MACH_MIPS_IRQ_H */
diff --git a/arch/mips/include/asm/mach-malta/kernel-entry-init.h b/arch/mips/include/asm/mach-malta/kernel-entry-init.h
new file mode 100644
index 00000000000..0b793e7bf67
--- /dev/null
+++ b/arch/mips/include/asm/mach-malta/kernel-entry-init.h
@@ -0,0 +1,52 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Chris Dearman (chris@mips.com)
+ * Copyright (C) 2007 Mips Technologies, Inc.
+ */
+#ifndef __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H
+#define __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H
+
+ .macro kernel_entry_setup
+#ifdef CONFIG_MIPS_MT_SMTC
+ mfc0 t0, CP0_CONFIG
+ bgez t0, 9f
+ mfc0 t0, CP0_CONFIG, 1
+ bgez t0, 9f
+ mfc0 t0, CP0_CONFIG, 2
+ bgez t0, 9f
+ mfc0 t0, CP0_CONFIG, 3
+ and t0, 1<<2
+ bnez t0, 0f
+9:
+ /* Assume we came from YAMON... */
+ PTR_LA v0, 0x9fc00534 /* YAMON print */
+ lw v0, (v0)
+ move a0, zero
+ PTR_LA a1, nonmt_processor
+ jal v0
+
+ PTR_LA v0, 0x9fc00520 /* YAMON exit */
+ lw v0, (v0)
+ li a0, 1
+ jal v0
+
+1: b 1b
+
+ __INITDATA
+nonmt_processor:
+ .asciz "SMTC kernel requires the MT ASE to run\n"
+ __FINIT
+0:
+#endif
+ .endm
+
+/*
+ * Do SMP slave processor setup necessary before we can safely execute C code.
+ */
+ .macro smp_slave_setup
+ .endm
+
+#endif /* __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H */
diff --git a/arch/mips/include/asm/mach-malta/mach-gt64120.h b/arch/mips/include/asm/mach-malta/mach-gt64120.h
new file mode 100644
index 00000000000..0f863148f3b
--- /dev/null
+++ b/arch/mips/include/asm/mach-malta/mach-gt64120.h
@@ -0,0 +1,19 @@
+/*
+ * This is a direct copy of the ev96100.h file, with a global
+ * search and replace. The numbers are the same.
+ *
+ * The reason I'm duplicating this is so that the 64120/96100
+ * defines won't be confusing in the source code.
+ */
+#ifndef _ASM_MACH_MIPS_MACH_GT64120_DEP_H
+#define _ASM_MACH_MIPS_MACH_GT64120_DEP_H
+
+#define MIPS_GT_BASE 0x1be00000
+
+extern unsigned long _pcictrl_gt64120;
+/*
+ * GT64120 config space base address
+ */
+#define GT64120_BASE _pcictrl_gt64120
+
+#endif /* _ASM_MACH_MIPS_MACH_GT64120_DEP_H */
diff --git a/arch/mips/include/asm/mach-malta/mc146818rtc.h b/arch/mips/include/asm/mach-malta/mc146818rtc.h
new file mode 100644
index 00000000000..ea612f37f61
--- /dev/null
+++ b/arch/mips/include/asm/mach-malta/mc146818rtc.h
@@ -0,0 +1,48 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 2003 by Ralf Baechle
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * RTC routines for Malta style attached PIIX4 device, which contains a
+ * Motorola MC146818A-compatible Real Time Clock.
+ */
+#ifndef __ASM_MACH_MALTA_MC146818RTC_H
+#define __ASM_MACH_MALTA_MC146818RTC_H
+
+#include <asm/io.h>
+#include <asm/mips-boards/generic.h>
+#include <asm/mips-boards/malta.h>
+
+#define RTC_PORT(x) (0x70 + (x))
+#define RTC_IRQ 8
+
+static inline unsigned char CMOS_READ(unsigned long addr)
+{
+ outb(addr, MALTA_RTC_ADR_REG);
+ return inb(MALTA_RTC_DAT_REG);
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
+{
+ outb(addr, MALTA_RTC_ADR_REG);
+ outb(data, MALTA_RTC_DAT_REG);
+}
+
+#define RTC_ALWAYS_BCD 0
+
+#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1900)
+
+#endif /* __ASM_MACH_MALTA_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mach-malta/war.h b/arch/mips/include/asm/mach-malta/war.h
new file mode 100644
index 00000000000..7c6931d5f45
--- /dev/null
+++ b/arch/mips/include/asm/mach-malta/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_MIPS_WAR_H
+#define __ASM_MIPS_MACH_MIPS_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 1
+#define MIPS_CACHE_SYNC_WAR 1
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 1
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */
diff --git a/arch/mips/include/asm/mach-mipssim/cpu-feature-overrides.h b/arch/mips/include/asm/mach-mipssim/cpu-feature-overrides.h
new file mode 100644
index 00000000000..779b0220573
--- /dev/null
+++ b/arch/mips/include/asm/mach-mipssim/cpu-feature-overrides.h
@@ -0,0 +1,65 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Chris Dearman
+ */
+#ifndef __ASM_MACH_SIM_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_SIM_CPU_FEATURE_OVERRIDES_H
+
+
+/*
+ * CPU feature overrides for MIPS boards
+ */
+#ifdef CONFIG_CPU_MIPS32
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_4k_cache 1
+#define cpu_has_fpu 0
+/* #define cpu_has_32fpr ? */
+#define cpu_has_counter 1
+/* #define cpu_has_watch ? */
+#define cpu_has_divec 1
+#define cpu_has_vce 0
+/* #define cpu_has_cache_cdex_p ? */
+/* #define cpu_has_cache_cdex_s ? */
+/* #define cpu_has_prefetch ? */
+#define cpu_has_mcheck 1
+/* #define cpu_has_ejtag ? */
+#define cpu_has_llsc 1
+/* #define cpu_has_vtag_icache ? */
+/* #define cpu_has_dc_aliases ? */
+/* #define cpu_has_ic_fills_f_dc ? */
+#define cpu_has_nofpuex 0
+/* #define cpu_has_64bits ? */
+/* #define cpu_has_64bit_zero_reg ? */
+/* #define cpu_has_inclusive_pcaches ? */
+#endif
+
+#ifdef CONFIG_CPU_MIPS64
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_4k_cache 1
+/* #define cpu_has_fpu ? */
+/* #define cpu_has_32fpr ? */
+#define cpu_has_counter 1
+/* #define cpu_has_watch ? */
+#define cpu_has_divec 1
+#define cpu_has_vce 0
+/* #define cpu_has_cache_cdex_p ? */
+/* #define cpu_has_cache_cdex_s ? */
+/* #define cpu_has_prefetch ? */
+#define cpu_has_mcheck 1
+/* #define cpu_has_ejtag ? */
+#define cpu_has_llsc 1
+/* #define cpu_has_vtag_icache ? */
+/* #define cpu_has_dc_aliases ? */
+/* #define cpu_has_ic_fills_f_dc ? */
+#define cpu_has_nofpuex 0
+/* #define cpu_has_64bits ? */
+/* #define cpu_has_64bit_zero_reg ? */
+/* #define cpu_has_inclusive_pcaches ? */
+#endif
+
+#endif /* __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-mipssim/war.h b/arch/mips/include/asm/mach-mipssim/war.h
new file mode 100644
index 00000000000..c8a74a3515e
--- /dev/null
+++ b/arch/mips/include/asm/mach-mipssim/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_MIPSSIM_WAR_H
+#define __ASM_MIPS_MACH_MIPSSIM_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_MIPSSIM_WAR_H */
diff --git a/arch/mips/include/asm/mach-pb1x00/mc146818rtc.h b/arch/mips/include/asm/mach-pb1x00/mc146818rtc.h
new file mode 100644
index 00000000000..622c58710e5
--- /dev/null
+++ b/arch/mips/include/asm/mach-pb1x00/mc146818rtc.h
@@ -0,0 +1,34 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2001, 03 by Ralf Baechle
+ *
+ * RTC routines for PC style attached Dallas chip.
+ */
+#ifndef __ASM_MACH_AU1XX_MC146818RTC_H
+#define __ASM_MACH_AU1XX_MC146818RTC_H
+
+#include <asm/io.h>
+#include <asm/mach-au1x00/au1000.h>
+
+#define RTC_PORT(x) (0x0c000000 + (x))
+#define RTC_IRQ 8
+#define PB1500_RTC_ADDR 0x0c000000
+
+static inline unsigned char CMOS_READ(unsigned long offset)
+{
+ offset <<= 2;
+ return (u8)(au_readl(offset + PB1500_RTC_ADDR) & 0xff);
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long offset)
+{
+ offset <<= 2;
+ au_writel(data, offset + PB1500_RTC_ADDR);
+}
+
+#define RTC_ALWAYS_BCD 1
+
+#endif /* __ASM_MACH_AU1XX_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1000.h b/arch/mips/include/asm/mach-pb1x00/pb1000.h
new file mode 100644
index 00000000000..6d1ff9060e4
--- /dev/null
+++ b/arch/mips/include/asm/mach-pb1x00/pb1000.h
@@ -0,0 +1,87 @@
+/*
+ * Alchemy Semi Pb1000 Referrence Board
+ *
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_PB1000_H
+#define __ASM_PB1000_H
+
+/* PCMCIA PB1000 specific defines */
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
+
+#define PB1000_PCR 0xBE000000
+# define PCR_SLOT_0_VPP0 (1 << 0)
+# define PCR_SLOT_0_VPP1 (1 << 1)
+# define PCR_SLOT_0_VCC0 (1 << 2)
+# define PCR_SLOT_0_VCC1 (1 << 3)
+# define PCR_SLOT_0_RST (1 << 4)
+# define PCR_SLOT_1_VPP0 (1 << 8)
+# define PCR_SLOT_1_VPP1 (1 << 9)
+# define PCR_SLOT_1_VCC0 (1 << 10)
+# define PCR_SLOT_1_VCC1 (1 << 11)
+# define PCR_SLOT_1_RST (1 << 12)
+
+#define PB1000_MDR 0xBE000004
+# define MDR_PI (1 << 5) /* PCMCIA int latch */
+# define MDR_EPI (1 << 14) /* enable PCMCIA int */
+# define MDR_CPI (1 << 15) /* clear PCMCIA int */
+
+#define PB1000_ACR1 0xBE000008
+# define ACR1_SLOT_0_CD1 (1 << 0) /* card detect 1 */
+# define ACR1_SLOT_0_CD2 (1 << 1) /* card detect 2 */
+# define ACR1_SLOT_0_READY (1 << 2) /* ready */
+# define ACR1_SLOT_0_STATUS (1 << 3) /* status change */
+# define ACR1_SLOT_0_VS1 (1 << 4) /* voltage sense 1 */
+# define ACR1_SLOT_0_VS2 (1 << 5) /* voltage sense 2 */
+# define ACR1_SLOT_0_INPACK (1 << 6) /* inpack pin status */
+# define ACR1_SLOT_1_CD1 (1 << 8) /* card detect 1 */
+# define ACR1_SLOT_1_CD2 (1 << 9) /* card detect 2 */
+# define ACR1_SLOT_1_READY (1 << 10) /* ready */
+# define ACR1_SLOT_1_STATUS (1 << 11) /* status change */
+# define ACR1_SLOT_1_VS1 (1 << 12) /* voltage sense 1 */
+# define ACR1_SLOT_1_VS2 (1 << 13) /* voltage sense 2 */
+# define ACR1_SLOT_1_INPACK (1 << 14) /* inpack pin status */
+
+#define CPLD_AUX0 0xBE00000C
+#define CPLD_AUX1 0xBE000010
+#define CPLD_AUX2 0xBE000014
+
+/* Voltage levels */
+
+/* VPPEN1 - VPPEN0 */
+#define VPP_GND ((0 << 1) | (0 << 0))
+#define VPP_5V ((1 << 1) | (0 << 0))
+#define VPP_3V ((0 << 1) | (1 << 0))
+#define VPP_12V ((0 << 1) | (1 << 0))
+#define VPP_HIZ ((1 << 1) | (1 << 0))
+
+/* VCCEN1 - VCCEN0 */
+#define VCC_3V ((0 << 1) | (1 << 0))
+#define VCC_5V ((1 << 1) | (0 << 0))
+#define VCC_HIZ ((0 << 1) | (0 << 0))
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT) \
+ ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
+#endif /* __ASM_PB1000_H */
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1100.h b/arch/mips/include/asm/mach-pb1x00/pb1100.h
new file mode 100644
index 00000000000..b1a60f1cbd0
--- /dev/null
+++ b/arch/mips/include/asm/mach-pb1x00/pb1100.h
@@ -0,0 +1,85 @@
+/*
+ * Alchemy Semi Pb1100 Referrence Board
+ *
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_PB1100_H
+#define __ASM_PB1100_H
+
+#define PB1100_IDENT 0xAE000000
+#define BOARD_STATUS_REG 0xAE000004
+# define PB1100_ROM_SEL (1 << 15)
+# define PB1100_ROM_SIZ (1 << 14)
+# define PB1100_SWAP_BOOT (1 << 13)
+# define PB1100_FLASH_WP (1 << 12)
+# define PB1100_ROM_H_STS (1 << 11)
+# define PB1100_ROM_L_STS (1 << 10)
+# define PB1100_FLASH_H_STS (1 << 9)
+# define PB1100_FLASH_L_STS (1 << 8)
+# define PB1100_SRAM_SIZ (1 << 7)
+# define PB1100_TSC_BUSY (1 << 6)
+# define PB1100_PCMCIA_VS_MASK (3 << 4)
+# define PB1100_RS232_CD (1 << 3)
+# define PB1100_RS232_CTS (1 << 2)
+# define PB1100_RS232_DSR (1 << 1)
+# define PB1100_RS232_RI (1 << 0)
+
+#define PB1100_IRDA_RS232 0xAE00000C
+# define PB1100_IRDA_FULL (0 << 14) /* full power */
+# define PB1100_IRDA_SHUTDOWN (1 << 14)
+# define PB1100_IRDA_TT (2 << 14) /* 2/3 power */
+# define PB1100_IRDA_OT (3 << 14) /* 1/3 power */
+# define PB1100_IRDA_FIR (1 << 13)
+
+#define PCMCIA_BOARD_REG 0xAE000010
+# define PB1100_SD_WP1_RO (1 << 15) /* read only */
+# define PB1100_SD_WP0_RO (1 << 14) /* read only */
+# define PB1100_SD_PWR1 (1 << 11) /* applies power to SD1 */
+# define PB1100_SD_PWR0 (1 << 10) /* applies power to SD0 */
+# define PB1100_SEL_SD_CONN1 (1 << 9)
+# define PB1100_SEL_SD_CONN0 (1 << 8)
+# define PC_DEASSERT_RST (1 << 7)
+# define PC_DRV_EN (1 << 4)
+
+#define PB1100_G_CONTROL 0xAE000014 /* graphics control */
+
+#define PB1100_RST_VDDI 0xAE00001C
+# define PB1100_SOFT_RESET (1 << 15) /* clear to reset the board */
+# define PB1100_VDDI_MASK 0x1F
+
+#define PB1100_LEDS 0xAE000018
+
+/*
+ * 11:8 is 4 discreet LEDs. Clearing a bit illuminates the LED.
+ * 7:0 is the LED Display's decimal points.
+ */
+#define PB1100_HEX_LED 0xAE000018
+
+/* PCMCIA Pb1100 specific defines */
+#define PCMCIA_MAX_SOCK 0
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0))
+
+#endif /* __ASM_PB1100_H */
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1200.h b/arch/mips/include/asm/mach-pb1x00/pb1200.h
new file mode 100644
index 00000000000..c8618df88cb
--- /dev/null
+++ b/arch/mips/include/asm/mach-pb1x00/pb1200.h
@@ -0,0 +1,259 @@
+/*
+ * AMD Alchemy Pb1200 Referrence Board
+ * Board Registers defines.
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_PB1200_H
+#define __ASM_PB1200_H
+
+#include <linux/types.h>
+#include <asm/mach-au1x00/au1xxx_psc.h>
+
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
+
+/*
+ * SPI and SMB are muxed on the Pb1200 board.
+ * Refer to board documentation.
+ */
+#define SPI_PSC_BASE PSC0_BASE_ADDR
+#define SMBUS_PSC_BASE PSC0_BASE_ADDR
+/*
+ * AC97 and I2S are muxed on the Pb1200 board.
+ * Refer to board documentation.
+ */
+#define AC97_PSC_BASE PSC1_BASE_ADDR
+#define I2S_PSC_BASE PSC1_BASE_ADDR
+
+#define BCSR_KSEG1_ADDR 0xAD800000
+
+typedef volatile struct
+{
+ /*00*/ u16 whoami;
+ u16 reserved0;
+ /*04*/ u16 status;
+ u16 reserved1;
+ /*08*/ u16 switches;
+ u16 reserved2;
+ /*0C*/ u16 resets;
+ u16 reserved3;
+
+ /*10*/ u16 pcmcia;
+ u16 reserved4;
+ /*14*/ u16 board;
+ u16 reserved5;
+ /*18*/ u16 disk_leds;
+ u16 reserved6;
+ /*1C*/ u16 system;
+ u16 reserved7;
+
+ /*20*/ u16 intclr;
+ u16 reserved8;
+ /*24*/ u16 intset;
+ u16 reserved9;
+ /*28*/ u16 intclr_mask;
+ u16 reserved10;
+ /*2C*/ u16 intset_mask;
+ u16 reserved11;
+
+ /*30*/ u16 sig_status;
+ u16 reserved12;
+ /*34*/ u16 int_status;
+ u16 reserved13;
+ /*38*/ u16 reserved14;
+ u16 reserved15;
+ /*3C*/ u16 reserved16;
+ u16 reserved17;
+
+} BCSR;
+
+static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+/*
+ * Register bit definitions for the BCSRs
+ */
+#define BCSR_WHOAMI_DCID 0x000F
+#define BCSR_WHOAMI_CPLD 0x00F0
+#define BCSR_WHOAMI_BOARD 0x0F00
+
+#define BCSR_STATUS_PCMCIA0VS 0x0003
+#define BCSR_STATUS_PCMCIA1VS 0x000C
+#define BCSR_STATUS_SWAPBOOT 0x0040
+#define BCSR_STATUS_FLASHBUSY 0x0100
+#define BCSR_STATUS_IDECBLID 0x0200
+#define BCSR_STATUS_SD0WP 0x0400
+#define BCSR_STATUS_SD1WP 0x0800
+#define BCSR_STATUS_U0RXD 0x1000
+#define BCSR_STATUS_U1RXD 0x2000
+
+#define BCSR_SWITCHES_OCTAL 0x00FF
+#define BCSR_SWITCHES_DIP_1 0x0080
+#define BCSR_SWITCHES_DIP_2 0x0040
+#define BCSR_SWITCHES_DIP_3 0x0020
+#define BCSR_SWITCHES_DIP_4 0x0010
+#define BCSR_SWITCHES_DIP_5 0x0008
+#define BCSR_SWITCHES_DIP_6 0x0004
+#define BCSR_SWITCHES_DIP_7 0x0002
+#define BCSR_SWITCHES_DIP_8 0x0001
+#define BCSR_SWITCHES_ROTARY 0x0F00
+
+#define BCSR_RESETS_ETH 0x0001
+#define BCSR_RESETS_CAMERA 0x0002
+#define BCSR_RESETS_DC 0x0004
+#define BCSR_RESETS_IDE 0x0008
+/* not resets but in the same register */
+#define BCSR_RESETS_WSCFSM 0x0800
+#define BCSR_RESETS_PCS0MUX 0x1000
+#define BCSR_RESETS_PCS1MUX 0x2000
+#define BCSR_RESETS_SPISEL 0x4000
+#define BCSR_RESETS_SD1MUX 0x8000
+
+#define BCSR_PCMCIA_PC0VPP 0x0003
+#define BCSR_PCMCIA_PC0VCC 0x000C
+#define BCSR_PCMCIA_PC0DRVEN 0x0010
+#define BCSR_PCMCIA_PC0RST 0x0080
+#define BCSR_PCMCIA_PC1VPP 0x0300
+#define BCSR_PCMCIA_PC1VCC 0x0C00
+#define BCSR_PCMCIA_PC1DRVEN 0x1000
+#define BCSR_PCMCIA_PC1RST 0x8000
+
+#define BCSR_BOARD_LCDVEE 0x0001
+#define BCSR_BOARD_LCDVDD 0x0002
+#define BCSR_BOARD_LCDBL 0x0004
+#define BCSR_BOARD_CAMSNAP 0x0010
+#define BCSR_BOARD_CAMPWR 0x0020
+#define BCSR_BOARD_SD0PWR 0x0040
+#define BCSR_BOARD_SD1PWR 0x0080
+
+#define BCSR_LEDS_DECIMALS 0x00FF
+#define BCSR_LEDS_LED0 0x0100
+#define BCSR_LEDS_LED1 0x0200
+#define BCSR_LEDS_LED2 0x0400
+#define BCSR_LEDS_LED3 0x0800
+
+#define BCSR_SYSTEM_VDDI 0x001F
+#define BCSR_SYSTEM_POWEROFF 0x4000
+#define BCSR_SYSTEM_RESET 0x8000
+
+/* Bit positions for the different interrupt sources */
+#define BCSR_INT_IDE 0x0001
+#define BCSR_INT_ETH 0x0002
+#define BCSR_INT_PC0 0x0004
+#define BCSR_INT_PC0STSCHG 0x0008
+#define BCSR_INT_PC1 0x0010
+#define BCSR_INT_PC1STSCHG 0x0020
+#define BCSR_INT_DC 0x0040
+#define BCSR_INT_FLASHBUSY 0x0080
+#define BCSR_INT_PC0INSERT 0x0100
+#define BCSR_INT_PC0EJECT 0x0200
+#define BCSR_INT_PC1INSERT 0x0400
+#define BCSR_INT_PC1EJECT 0x0800
+#define BCSR_INT_SD0INSERT 0x1000
+#define BCSR_INT_SD0EJECT 0x2000
+#define BCSR_INT_SD1INSERT 0x4000
+#define BCSR_INT_SD1EJECT 0x8000
+
+#define SMC91C111_PHYS_ADDR 0x0D000300
+#define SMC91C111_INT PB1200_ETH_INT
+
+#define IDE_PHYS_ADDR 0x0C800000
+#define IDE_REG_SHIFT 5
+#define IDE_PHYS_LEN (16 << IDE_REG_SHIFT)
+#define IDE_INT PB1200_IDE_INT
+#define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1
+#define IDE_RQSIZE 128
+
+#define NAND_PHYS_ADDR 0x1C000000
+
+/*
+ * Timing values as described in databook, * ns value stripped of
+ * lower 2 bits.
+ * These defines are here rather than an Au1200 generic file because
+ * the parts chosen on another board may be different and may require
+ * different timings.
+ */
+#define NAND_T_H (18 >> 2)
+#define NAND_T_PUL (30 >> 2)
+#define NAND_T_SU (30 >> 2)
+#define NAND_T_WH (30 >> 2)
+
+/* Bitfield shift amounts */
+#define NAND_T_H_SHIFT 0
+#define NAND_T_PUL_SHIFT 4
+#define NAND_T_SU_SHIFT 8
+#define NAND_T_WH_SHIFT 12
+
+#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
+ ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
+ ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
+ ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT))
+
+/*
+ * External Interrupts for Pb1200 as of 8/6/2004.
+ * Bit positions in the CPLD registers can be calculated by taking
+ * the interrupt define and subtracting the PB1200_INT_BEGIN value.
+ *
+ * Example: IDE bis pos is = 64 - 64
+ * ETH bit pos is = 65 - 64
+ */
+enum external_pb1200_ints {
+ PB1200_INT_BEGIN = AU1000_MAX_INTR + 1,
+
+ PB1200_IDE_INT = PB1200_INT_BEGIN,
+ PB1200_ETH_INT,
+ PB1200_PC0_INT,
+ PB1200_PC0_STSCHG_INT,
+ PB1200_PC1_INT,
+ PB1200_PC1_STSCHG_INT,
+ PB1200_DC_INT,
+ PB1200_FLASHBUSY_INT,
+ PB1200_PC0_INSERT_INT,
+ PB1200_PC0_EJECT_INT,
+ PB1200_PC1_INSERT_INT,
+ PB1200_PC1_EJECT_INT,
+ PB1200_SD0_INSERT_INT,
+ PB1200_SD0_EJECT_INT,
+ PB1200_SD1_INSERT_INT,
+ PB1200_SD1_EJECT_INT,
+
+ PB1200_INT_END = PB1200_INT_BEGIN + 15
+};
+
+/*
+ * Pb1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c
+ */
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT) \
+ ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
+
+#define BOARD_PC0_INT PB1200_PC0_INT
+#define BOARD_PC1_INT PB1200_PC1_INT
+#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET)))
+
+/* NAND chip select */
+#define NAND_CS 1
+
+#endif /* __ASM_PB1200_H */
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1500.h b/arch/mips/include/asm/mach-pb1x00/pb1500.h
new file mode 100644
index 00000000000..da51a2eb7b8
--- /dev/null
+++ b/arch/mips/include/asm/mach-pb1x00/pb1500.h
@@ -0,0 +1,49 @@
+/*
+ * Alchemy Semi Pb1500 Referrence Board
+ *
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_PB1500_H
+#define __ASM_PB1500_H
+
+#define IDENT_BOARD_REG 0xAE000000
+#define BOARD_STATUS_REG 0xAE000004
+#define PCI_BOARD_REG 0xAE000010
+#define PCMCIA_BOARD_REG 0xAE000010
+# define PC_DEASSERT_RST 0x80
+# define PC_DRV_EN 0x10
+#define PB1500_G_CONTROL 0xAE000014
+#define PB1500_RST_VDDI 0xAE00001C
+#define PB1500_LEDS 0xAE000018
+
+#define PB1500_HEX_LED 0xAF000004
+#define PB1500_HEX_LED_BLANK 0xAF000008
+
+/* PCMCIA Pb1500 specific defines */
+#define PCMCIA_MAX_SOCK 0
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0))
+
+#endif /* __ASM_PB1500_H */
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1550.h b/arch/mips/include/asm/mach-pb1x00/pb1550.h
new file mode 100644
index 00000000000..6704a11497d
--- /dev/null
+++ b/arch/mips/include/asm/mach-pb1x00/pb1550.h
@@ -0,0 +1,177 @@
+/*
+ * AMD Alchemy Semi PB1550 Referrence Board
+ * Board Registers defines.
+ *
+ * Copyright 2004 Embedded Edge LLC.
+ * Copyright 2005 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_PB1550_H
+#define __ASM_PB1550_H
+
+#include <linux/types.h>
+#include <asm/mach-au1x00/au1xxx_psc.h>
+
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX
+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX
+
+#define SPI_PSC_BASE PSC0_BASE_ADDR
+#define AC97_PSC_BASE PSC1_BASE_ADDR
+#define SMBUS_PSC_BASE PSC2_BASE_ADDR
+#define I2S_PSC_BASE PSC3_BASE_ADDR
+
+#define BCSR_PHYS_ADDR 0xAF000000
+
+typedef volatile struct
+{
+ /*00*/ u16 whoami;
+ u16 reserved0;
+ /*04*/ u16 status;
+ u16 reserved1;
+ /*08*/ u16 switches;
+ u16 reserved2;
+ /*0C*/ u16 resets;
+ u16 reserved3;
+ /*10*/ u16 pcmcia;
+ u16 reserved4;
+ /*14*/ u16 pci;
+ u16 reserved5;
+ /*18*/ u16 leds;
+ u16 reserved6;
+ /*1C*/ u16 system;
+ u16 reserved7;
+
+} BCSR;
+
+static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR;
+
+/*
+ * Register bit definitions for the BCSRs
+ */
+#define BCSR_WHOAMI_DCID 0x000F
+#define BCSR_WHOAMI_CPLD 0x00F0
+#define BCSR_WHOAMI_BOARD 0x0F00
+
+#define BCSR_STATUS_PCMCIA0VS 0x0003
+#define BCSR_STATUS_PCMCIA1VS 0x000C
+#define BCSR_STATUS_PCMCIA0FI 0x0010
+#define BCSR_STATUS_PCMCIA1FI 0x0020
+#define BCSR_STATUS_SWAPBOOT 0x0040
+#define BCSR_STATUS_SRAMWIDTH 0x0080
+#define BCSR_STATUS_FLASHBUSY 0x0100
+#define BCSR_STATUS_ROMBUSY 0x0200
+#define BCSR_STATUS_USBOTGID 0x0800
+#define BCSR_STATUS_U0RXD 0x1000
+#define BCSR_STATUS_U1RXD 0x2000
+#define BCSR_STATUS_U3RXD 0x8000
+
+#define BCSR_SWITCHES_OCTAL 0x00FF
+#define BCSR_SWITCHES_DIP_1 0x0080
+#define BCSR_SWITCHES_DIP_2 0x0040
+#define BCSR_SWITCHES_DIP_3 0x0020
+#define BCSR_SWITCHES_DIP_4 0x0010
+#define BCSR_SWITCHES_DIP_5 0x0008
+#define BCSR_SWITCHES_DIP_6 0x0004
+#define BCSR_SWITCHES_DIP_7 0x0002
+#define BCSR_SWITCHES_DIP_8 0x0001
+#define BCSR_SWITCHES_ROTARY 0x0F00
+
+#define BCSR_RESETS_PHY0 0x0001
+#define BCSR_RESETS_PHY1 0x0002
+#define BCSR_RESETS_DC 0x0004
+#define BCSR_RESETS_WSC 0x2000
+#define BCSR_RESETS_SPISEL 0x4000
+#define BCSR_RESETS_DMAREQ 0x8000
+
+#define BCSR_PCMCIA_PC0VPP 0x0003
+#define BCSR_PCMCIA_PC0VCC 0x000C
+#define BCSR_PCMCIA_PC0DRVEN 0x0010
+#define BCSR_PCMCIA_PC0RST 0x0080
+#define BCSR_PCMCIA_PC1VPP 0x0300
+#define BCSR_PCMCIA_PC1VCC 0x0C00
+#define BCSR_PCMCIA_PC1DRVEN 0x1000
+#define BCSR_PCMCIA_PC1RST 0x8000
+
+#define BCSR_PCI_M66EN 0x0001
+#define BCSR_PCI_M33 0x0100
+#define BCSR_PCI_EXTERNARB 0x0200
+#define BCSR_PCI_GPIO200RST 0x0400
+#define BCSR_PCI_CLKOUT 0x0800
+#define BCSR_PCI_CFGHOST 0x1000
+
+#define BCSR_LEDS_DECIMALS 0x00FF
+#define BCSR_LEDS_LED0 0x0100
+#define BCSR_LEDS_LED1 0x0200
+#define BCSR_LEDS_LED2 0x0400
+#define BCSR_LEDS_LED3 0x0800
+
+#define BCSR_SYSTEM_VDDI 0x001F
+#define BCSR_SYSTEM_POWEROFF 0x4000
+#define BCSR_SYSTEM_RESET 0x8000
+
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT) \
+ ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
+
+#if defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER)
+#define PB1550_BOTH_BANKS
+#elif defined(CONFIG_MTD_PB1550_BOOT) && !defined(CONFIG_MTD_PB1550_USER)
+#define PB1550_BOOT_ONLY
+#elif !defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER)
+#define PB1550_USER_ONLY
+#endif
+
+/*
+ * Timing values as described in databook, * ns value stripped of
+ * lower 2 bits.
+ * These defines are here rather than an SOC1550 generic file because
+ * the parts chosen on another board may be different and may require
+ * different timings.
+ */
+#define NAND_T_H (18 >> 2)
+#define NAND_T_PUL (30 >> 2)
+#define NAND_T_SU (30 >> 2)
+#define NAND_T_WH (30 >> 2)
+
+/* Bitfield shift amounts */
+#define NAND_T_H_SHIFT 0
+#define NAND_T_PUL_SHIFT 4
+#define NAND_T_SU_SHIFT 8
+#define NAND_T_WH_SHIFT 12
+
+#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
+ ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
+ ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
+ ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT))
+
+#define NAND_CS 1
+
+/* Should be done by YAMON */
+#define NAND_STCFG 0x00400005 /* 8-bit NAND */
+#define NAND_STTIME 0x00007774 /* valid for 396 MHz SD=2 only */
+#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */
+
+#endif /* __ASM_PB1550_H */
diff --git a/arch/mips/include/asm/mach-pnx8550/cm.h b/arch/mips/include/asm/mach-pnx8550/cm.h
new file mode 100644
index 00000000000..bb0a56c7d01
--- /dev/null
+++ b/arch/mips/include/asm/mach-pnx8550/cm.h
@@ -0,0 +1,43 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * Clock module specific definitions
+ *
+ * Author: source@mvista.com
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+#ifndef __PNX8550_CM_H
+#define __PNX8550_CM_H
+
+#define PNX8550_CM_BASE 0xBBE47000
+
+#define PNX8550_CM_PLL0_CTL *(volatile unsigned long *)(PNX8550_CM_BASE + 0x000)
+#define PNX8550_CM_PLL1_CTL *(volatile unsigned long *)(PNX8550_CM_BASE + 0x004)
+#define PNX8550_CM_PLL2_CTL *(volatile unsigned long *)(PNX8550_CM_BASE + 0x008)
+#define PNX8550_CM_PLL3_CTL *(volatile unsigned long *)(PNX8550_CM_BASE + 0x00C)
+
+// Table not complete.....
+
+#define PNX8550_CM_PLL_BLOCKED_MASK 0x80000000
+#define PNX8550_CM_PLL_LOCK_MASK 0x40000000
+#define PNX8550_CM_PLL_CURRENT_ADJ_MASK 0x3c000000
+#define PNX8550_CM_PLL_N_MASK 0x01ff0000
+#define PNX8550_CM_PLL_M_MASK 0x00003f00
+#define PNX8550_CM_PLL_P_MASK 0x0000000c
+#define PNX8550_CM_PLL_PD_MASK 0x00000002
+
+
+#endif
diff --git a/arch/mips/include/asm/mach-pnx8550/glb.h b/arch/mips/include/asm/mach-pnx8550/glb.h
new file mode 100644
index 00000000000..07aa85e609b
--- /dev/null
+++ b/arch/mips/include/asm/mach-pnx8550/glb.h
@@ -0,0 +1,86 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * PNX8550 global definitions
+ *
+ * Author: source@mvista.com
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+#ifndef __PNX8550_GLB_H
+#define __PNX8550_GLB_H
+
+#define PNX8550_GLB1_BASE 0xBBE63000
+#define PNX8550_GLB2_BASE 0xBBE4d000
+#define PNX8550_RESET_BASE 0xBBE60000
+
+/* PCI Inta Output Enable Registers */
+#define PNX8550_GLB2_ENAB_INTA_O *(volatile unsigned long *)(PNX8550_GLB2_BASE + 0x050)
+
+/* Bit 1:Enable DAC Powerdown
+ 0:DACs are enabled and are working normally
+ 1:DACs are powerdown
+*/
+#define PNX8550_GLB_DAC_PD 0x2
+/* Bit 0:Enable of PCI inta output
+ 0 = Disable PCI inta output
+ 1 = Enable PCI inta output
+*/
+#define PNX8550_GLB_ENABLE_INTA_O 0x1
+
+/* PCI Direct Mappings */
+#define PNX8550_PCIMEM 0x12000000
+#define PNX8550_PCIMEM_SIZE 0x08000000
+#define PNX8550_PCIIO 0x1c000000
+#define PNX8550_PCIIO_SIZE 0x02000000 /* 32M */
+
+#define PNX8550_PORT_BASE KSEG1
+
+// GPIO def
+#define PNX8550_GPIO_BASE 0x1Be00000
+
+#define PNX8550_GPIO_DIRQ0 (PNX8550_GPIO_BASE + 0x104500)
+#define PNX8550_GPIO_MC1 (PNX8550_GPIO_BASE + 0x104004)
+#define PNX8550_GPIO_MC_31_BIT 30
+#define PNX8550_GPIO_MC_30_BIT 28
+#define PNX8550_GPIO_MC_29_BIT 26
+#define PNX8550_GPIO_MC_28_BIT 24
+#define PNX8550_GPIO_MC_27_BIT 22
+#define PNX8550_GPIO_MC_26_BIT 20
+#define PNX8550_GPIO_MC_25_BIT 18
+#define PNX8550_GPIO_MC_24_BIT 16
+#define PNX8550_GPIO_MC_23_BIT 14
+#define PNX8550_GPIO_MC_22_BIT 12
+#define PNX8550_GPIO_MC_21_BIT 10
+#define PNX8550_GPIO_MC_20_BIT 8
+#define PNX8550_GPIO_MC_19_BIT 6
+#define PNX8550_GPIO_MC_18_BIT 4
+#define PNX8550_GPIO_MC_17_BIT 2
+#define PNX8550_GPIO_MC_16_BIT 0
+
+#define PNX8550_GPIO_MODE_PRIMOP 0x1
+#define PNX8550_GPIO_MODE_NO_OPENDR 0x2
+#define PNX8550_GPIO_MODE_OPENDR 0x3
+
+// RESET module
+#define PNX8550_RST_CTL *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x0)
+#define PNX8550_RST_CAUSE *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x4)
+#define PNX8550_RST_EN_WATCHDOG *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x8)
+
+#define PNX8550_RST_REL_MIPS_RST_N 0x8
+#define PNX8550_RST_DO_SW_RST 0x4
+#define PNX8550_RST_REL_SYS_RST_OUT 0x2
+#define PNX8550_RST_ASSERT_SYS_RST_OUT 0x1
+#endif
diff --git a/arch/mips/include/asm/mach-pnx8550/int.h b/arch/mips/include/asm/mach-pnx8550/int.h
new file mode 100644
index 00000000000..0e0668b524f
--- /dev/null
+++ b/arch/mips/include/asm/mach-pnx8550/int.h
@@ -0,0 +1,140 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * Interrupt specific definitions
+ *
+ * Author: source@mvista.com
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+#ifndef __PNX8550_INT_H
+#define __PNX8550_INT_H
+
+#define PNX8550_GIC_BASE 0xBBE3E000
+
+#define PNX8550_GIC_PRIMASK_0 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x000)
+#define PNX8550_GIC_PRIMASK_1 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x004)
+#define PNX8550_GIC_VECTOR_0 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x100)
+#define PNX8550_GIC_VECTOR_1 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x104)
+#define PNX8550_GIC_PEND_1_31 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x200)
+#define PNX8550_GIC_PEND_32_63 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x204)
+#define PNX8550_GIC_PEND_64_70 *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x208)
+#define PNX8550_GIC_FEATURES *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x300)
+#define PNX8550_GIC_REQ(x) *(volatile unsigned long *)(PNX8550_GIC_BASE + 0x400 + (x)*4)
+#define PNX8550_GIC_MOD_ID *(volatile unsigned long *)(PNX8550_GIC_BASE + 0xFFC)
+
+// cp0 is two software + six hw exceptions
+#define PNX8550_INT_CP0_TOTINT 8
+#define PNX8550_INT_CP0_MIN 0
+#define PNX8550_INT_CP0_MAX (PNX8550_INT_CP0_MIN + PNX8550_INT_CP0_TOTINT - 1)
+
+#define MIPS_CPU_GIC_IRQ 2
+#define MIPS_CPU_TIMER_IRQ 7
+
+// GIC are 71 exceptions connected to cp0's first hardware exception
+#define PNX8550_INT_GIC_TOTINT 71
+#define PNX8550_INT_GIC_MIN (PNX8550_INT_CP0_MAX+1)
+#define PNX8550_INT_GIC_MAX (PNX8550_INT_GIC_MIN + PNX8550_INT_GIC_TOTINT - 1)
+
+#define PNX8550_INT_UNDEF (PNX8550_INT_GIC_MIN+0)
+#define PNX8550_INT_IPC_TARGET0_MIPS (PNX8550_INT_GIC_MIN+1)
+#define PNX8550_INT_IPC_TARGET1_TM32_1 (PNX8550_INT_GIC_MIN+2)
+#define PNX8550_INT_IPC_TARGET1_TM32_2 (PNX8550_INT_GIC_MIN+3)
+#define PNX8550_INT_RESERVED_4 (PNX8550_INT_GIC_MIN+4)
+#define PNX8550_INT_USB (PNX8550_INT_GIC_MIN+5)
+#define PNX8550_INT_GPIO_EQ1 (PNX8550_INT_GIC_MIN+6)
+#define PNX8550_INT_GPIO_EQ2 (PNX8550_INT_GIC_MIN+7)
+#define PNX8550_INT_GPIO_EQ3 (PNX8550_INT_GIC_MIN+8)
+#define PNX8550_INT_GPIO_EQ4 (PNX8550_INT_GIC_MIN+9)
+
+#define PNX8550_INT_GPIO_EQ5 (PNX8550_INT_GIC_MIN+10)
+#define PNX8550_INT_GPIO_EQ6 (PNX8550_INT_GIC_MIN+11)
+#define PNX8550_INT_RESERVED_12 (PNX8550_INT_GIC_MIN+12)
+#define PNX8550_INT_QVCP1 (PNX8550_INT_GIC_MIN+13)
+#define PNX8550_INT_QVCP2 (PNX8550_INT_GIC_MIN+14)
+#define PNX8550_INT_I2C1 (PNX8550_INT_GIC_MIN+15)
+#define PNX8550_INT_I2C2 (PNX8550_INT_GIC_MIN+16)
+#define PNX8550_INT_ISO_UART1 (PNX8550_INT_GIC_MIN+17)
+#define PNX8550_INT_ISO_UART2 (PNX8550_INT_GIC_MIN+18)
+#define PNX8550_INT_UART1 (PNX8550_INT_GIC_MIN+19)
+
+#define PNX8550_INT_UART2 (PNX8550_INT_GIC_MIN+20)
+#define PNX8550_INT_QNTR (PNX8550_INT_GIC_MIN+21)
+#define PNX8550_INT_RESERVED22 (PNX8550_INT_GIC_MIN+22)
+#define PNX8550_INT_T_DSC (PNX8550_INT_GIC_MIN+23)
+#define PNX8550_INT_M_DSC (PNX8550_INT_GIC_MIN+24)
+#define PNX8550_INT_RESERVED25 (PNX8550_INT_GIC_MIN+25)
+#define PNX8550_INT_2D_DRAW_ENG (PNX8550_INT_GIC_MIN+26)
+#define PNX8550_INT_MEM_BASED_SCALAR1 (PNX8550_INT_GIC_MIN+27)
+#define PNX8550_INT_VIDEO_MPEG (PNX8550_INT_GIC_MIN+28)
+#define PNX8550_INT_VIDEO_INPUT_P1 (PNX8550_INT_GIC_MIN+29)
+
+#define PNX8550_INT_VIDEO_INPUT_P2 (PNX8550_INT_GIC_MIN+30)
+#define PNX8550_INT_SPDI1 (PNX8550_INT_GIC_MIN+31)
+#define PNX8550_INT_SPDO (PNX8550_INT_GIC_MIN+32)
+#define PNX8550_INT_AUDIO_INPUT1 (PNX8550_INT_GIC_MIN+33)
+#define PNX8550_INT_AUDIO_OUTPUT1 (PNX8550_INT_GIC_MIN+34)
+#define PNX8550_INT_AUDIO_INPUT2 (PNX8550_INT_GIC_MIN+35)
+#define PNX8550_INT_AUDIO_OUTPUT2 (PNX8550_INT_GIC_MIN+36)
+#define PNX8550_INT_MEMBASED_SCALAR2 (PNX8550_INT_GIC_MIN+37)
+#define PNX8550_INT_VPK (PNX8550_INT_GIC_MIN+38)
+#define PNX8550_INT_MPEG1_MIPS (PNX8550_INT_GIC_MIN+39)
+
+#define PNX8550_INT_MPEG1_TM (PNX8550_INT_GIC_MIN+40)
+#define PNX8550_INT_MPEG2_MIPS (PNX8550_INT_GIC_MIN+41)
+#define PNX8550_INT_MPEG2_TM (PNX8550_INT_GIC_MIN+42)
+#define PNX8550_INT_TS_DMA (PNX8550_INT_GIC_MIN+43)
+#define PNX8550_INT_EDMA (PNX8550_INT_GIC_MIN+44)
+#define PNX8550_INT_TM_DEBUG1 (PNX8550_INT_GIC_MIN+45)
+#define PNX8550_INT_TM_DEBUG2 (PNX8550_INT_GIC_MIN+46)
+#define PNX8550_INT_PCI_INTA (PNX8550_INT_GIC_MIN+47)
+#define PNX8550_INT_CLOCK_MODULE (PNX8550_INT_GIC_MIN+48)
+#define PNX8550_INT_PCI_XIO_INTA_PCI (PNX8550_INT_GIC_MIN+49)
+
+#define PNX8550_INT_PCI_XIO_INTB_DMA (PNX8550_INT_GIC_MIN+50)
+#define PNX8550_INT_PCI_XIO_INTC_GPPM (PNX8550_INT_GIC_MIN+51)
+#define PNX8550_INT_PCI_XIO_INTD_GPXIO (PNX8550_INT_GIC_MIN+52)
+#define PNX8550_INT_DVD_CSS (PNX8550_INT_GIC_MIN+53)
+#define PNX8550_INT_VLD (PNX8550_INT_GIC_MIN+54)
+#define PNX8550_INT_GPIO_TSU_7_0 (PNX8550_INT_GIC_MIN+55)
+#define PNX8550_INT_GPIO_TSU_15_8 (PNX8550_INT_GIC_MIN+56)
+#define PNX8550_INT_GPIO_CTU_IR (PNX8550_INT_GIC_MIN+57)
+#define PNX8550_INT_GPIO0 (PNX8550_INT_GIC_MIN+58)
+#define PNX8550_INT_GPIO1 (PNX8550_INT_GIC_MIN+59)
+
+#define PNX8550_INT_GPIO2 (PNX8550_INT_GIC_MIN+60)
+#define PNX8550_INT_GPIO3 (PNX8550_INT_GIC_MIN+61)
+#define PNX8550_INT_GPIO4 (PNX8550_INT_GIC_MIN+62)
+#define PNX8550_INT_GPIO5 (PNX8550_INT_GIC_MIN+63)
+#define PNX8550_INT_GPIO6 (PNX8550_INT_GIC_MIN+64)
+#define PNX8550_INT_GPIO7 (PNX8550_INT_GIC_MIN+65)
+#define PNX8550_INT_PMAN_SECURITY (PNX8550_INT_GIC_MIN+66)
+#define PNX8550_INT_I2C3 (PNX8550_INT_GIC_MIN+67)
+#define PNX8550_INT_RESERVED_68 (PNX8550_INT_GIC_MIN+68)
+#define PNX8550_INT_SPDI2 (PNX8550_INT_GIC_MIN+69)
+
+#define PNX8550_INT_I2C4 (PNX8550_INT_GIC_MIN+70)
+
+// Timer are 3 exceptions connected to cp0's 7th hardware exception
+#define PNX8550_INT_TIMER_TOTINT 3
+#define PNX8550_INT_TIMER_MIN (PNX8550_INT_GIC_MAX+1)
+#define PNX8550_INT_TIMER_MAX (PNX8550_INT_TIMER_MIN + PNX8550_INT_TIMER_TOTINT - 1)
+
+#define PNX8550_INT_TIMER1 (PNX8550_INT_TIMER_MIN+0)
+#define PNX8550_INT_TIMER2 (PNX8550_INT_TIMER_MIN+1)
+#define PNX8550_INT_TIMER3 (PNX8550_INT_TIMER_MIN+2)
+#define PNX8550_INT_WATCHDOG PNX8550_INT_TIMER3
+
+#endif
diff --git a/arch/mips/include/asm/mach-pnx8550/kernel-entry-init.h b/arch/mips/include/asm/mach-pnx8550/kernel-entry-init.h
new file mode 100644
index 00000000000..bdde00c9199
--- /dev/null
+++ b/arch/mips/include/asm/mach-pnx8550/kernel-entry-init.h
@@ -0,0 +1,262 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Embedded Alley Solutions, Inc
+ */
+#ifndef __ASM_MACH_KERNEL_ENTRY_INIT_H
+#define __ASM_MACH_KERNEL_ENTRY_INIT_H
+
+#include <asm/cacheops.h>
+#include <asm/addrspace.h>
+
+#define CO_CONFIGPR_VALID 0x3F1F41FF /* valid bits to write to ConfigPR */
+#define HAZARD_CP0 nop; nop; nop; nop; nop; nop; nop; nop; nop; nop; nop; nop;
+#define CACHE_OPC 0xBC000000 /* MIPS cache instruction opcode */
+#define ICACHE_LINE_SIZE 32 /* Instruction cache line size bytes */
+#define DCACHE_LINE_SIZE 32 /* Data cache line size in bytes */
+
+#define ICACHE_SET_COUNT 256 /* Instruction cache set count */
+#define DCACHE_SET_COUNT 128 /* Data cache set count */
+
+#define ICACHE_SET_SIZE (ICACHE_SET_COUNT * ICACHE_LINE_SIZE)
+#define DCACHE_SET_SIZE (DCACHE_SET_COUNT * DCACHE_LINE_SIZE)
+
+ .macro kernel_entry_setup
+ .set push
+ .set noreorder
+ /*
+ * PNX8550 entry point, when running a non compressed
+ * kernel. When loading a zImage, the head.S code in
+ * arch/mips/zboot/pnx8550 will init the caches and,
+ * decompress the kernel, and branch to kernel_entry.
+ */
+cache_begin: li t0, (1<<28)
+ mtc0 t0, CP0_STATUS /* cp0 usable */
+ HAZARD_CP0
+
+ mtc0 zero, CP0_CAUSE
+ HAZARD_CP0
+
+
+ /* Set static virtual to phys address translation and TLB disabled */
+ mfc0 t0, CP0_CONFIG, 7
+ HAZARD_CP0
+
+ and t0, ~((1<<19) | (1<<20)) /* TLB/MAP cleared */
+ mtc0 t0, CP0_CONFIG, 7
+ HAZARD_CP0
+
+ /* CPU boots with kseg0 cache algo set to 0x2 -- uncached */
+
+ init_icache
+ nop
+ init_dcache
+ nop
+
+ cachePr4450ICReset
+ nop
+
+ cachePr4450DCReset
+ nop
+
+ /* read ConfigPR into t0 */
+ mfc0 t0, CP0_CONFIG, 7
+ HAZARD_CP0
+
+ /* enable the TLB */
+ or t0, (1<<19)
+
+ /* disable the ICACHE: at least 10x slower */
+ /* or t0, (1<<26) */
+
+ /* disable the DCACHE; CONFIG_CPU_HAS_LLSC should not be set */
+ /* or t0, (1<<27) */
+
+ and t0, CO_CONFIGPR_VALID
+
+ /* enable TLB. */
+ mtc0 t0, CP0_CONFIG, 7
+ HAZARD_CP0
+cache_end:
+ /* Setup CMEM_0 to MMIO address space, 2MB */
+ lui t0, 0x1BE0
+ addi t0, t0, 0x3
+ mtc0 $8, $22, 4
+ nop
+
+ /* Setup CMEM_1, 128MB */
+ lui t0, 0x1000
+ addi t0, t0, 0xf
+ mtc0 $8, $22, 5
+ nop
+
+
+ /* Setup CMEM_2, 32MB */
+ lui t0, 0x1C00
+ addi t0, t0, 0xb
+ mtc0 $8, $22, 6
+ nop
+
+ /* Setup CMEM_3, 0MB */
+ lui t0, 0x0
+ addi t0, t0, 0x0
+ mtc0 $8, $22, 7
+ nop
+
+ /* Enable cache */
+ mfc0 t0, CP0_CONFIG
+ HAZARD_CP0
+ and t0, t0, 0xFFFFFFF8
+ or t0, t0, 3
+ mtc0 t0, CP0_CONFIG
+ HAZARD_CP0
+ .set pop
+ .endm
+
+ .macro init_icache
+ .set push
+ .set noreorder
+
+ /* Get Cache Configuration */
+ mfc0 t3, CP0_CONFIG, 1
+ HAZARD_CP0
+
+ /* get cache Line size */
+
+ srl t1, t3, 19 /* C0_CONFIGPR_IL_SHIFT */
+ andi t1, t1, 0x7 /* C0_CONFIGPR_IL_MASK */
+ beq t1, zero, pr4450_instr_cache_invalidated /* if zero instruction cache is absent */
+ nop
+ addiu t0, t1, 1
+ ori t1, zero, 1
+ sllv t1, t1, t0
+
+ /* get max cache Index */
+ srl t2, t3, 22 /* C0_CONFIGPR_IS_SHIFT */
+ andi t2, t2, 0x7 /* C0_CONFIGPR_IS_MASK */
+ addiu t0, t2, 6
+ ori t2, zero, 1
+ sllv t2, t2, t0
+
+ /* get max cache way */
+ srl t3, t3, 16 /* C0_CONFIGPR_IA_SHIFT */
+ andi t3, t3, 0x7 /* C0_CONFIGPR_IA_MASK */
+ addiu t3, t3, 1
+
+ /* total no of cache lines */
+ multu t2, t3 /* max index * max way */
+ mflo t2
+ addiu t2, t2, -1
+
+ move t0, zero
+pr4450_next_instruction_cache_set:
+ cache Index_Invalidate_I, 0(t0)
+ addu t0, t0, t1 /* add bytes in a line */
+ bne t2, zero, pr4450_next_instruction_cache_set
+ addiu t2, t2, -1 /* reduce no of lines to invalidate by one */
+pr4450_instr_cache_invalidated:
+ .set pop
+ .endm
+
+ .macro init_dcache
+ .set push
+ .set noreorder
+ move t1, zero
+
+ /* Store Tag Information */
+ mtc0 zero, CP0_TAGLO, 0
+ HAZARD_CP0
+
+ mtc0 zero, CP0_TAGHI, 0
+ HAZARD_CP0
+
+ /* Cache size is 16384 = 512 lines x 32 bytes per line */
+ or t2, zero, (128*4)-1 /* 512 lines */
+ /* Invalidate all lines */
+2:
+ cache Index_Store_Tag_D, 0(t1)
+ addiu t2, t2, -1
+ bne t2, zero, 2b
+ addiu t1, t1, 32 /* 32 bytes in a line */
+ .set pop
+ .endm
+
+ .macro cachePr4450ICReset
+ .set push
+ .set noreorder
+
+ /* Save CP0 status reg on entry; */
+ /* disable interrupts during cache reset */
+ mfc0 t0, CP0_STATUS /* T0 = interrupt status on entry */
+ HAZARD_CP0
+
+ mtc0 zero, CP0_STATUS /* disable CPU interrupts */
+ HAZARD_CP0
+
+ or t1, zero, zero /* T1 = starting cache index (0) */
+ ori t2, zero, (256 - 1) /* T2 = inst cache set cnt - 1 */
+
+ icache_invd_loop:
+ /* 9 == register t1 */
+ .word CACHE_OPC | (9 << 21) | (Index_Invalidate_I << 16) | \
+ (0 * ICACHE_SET_SIZE) /* invalidate inst cache WAY0 */
+ .word CACHE_OPC | (9 << 21) | (Index_Invalidate_I << 16) | \
+ (1 * ICACHE_SET_SIZE) /* invalidate inst cache WAY1 */
+
+ addiu t1, t1, ICACHE_LINE_SIZE /* T1 = next cache line index */
+ bne t2, zero, icache_invd_loop /* T2 = 0 if all sets invalidated */
+ addiu t2, t2, -1 /* decrement T2 set cnt (delay slot) */
+
+ /* Initialize the latches in the instruction cache tag */
+ /* that drive the way selection tri-state bus drivers, by doing a */
+ /* dummy load while the instruction cache is still disabled. */
+ /* TODO: Is this needed ? */
+ la t1, KSEG0 /* T1 = cached memory base address */
+ lw zero, 0x0000(t1) /* (dummy read of first memory word) */
+
+ mtc0 t0, CP0_STATUS /* restore interrupt status on entry */
+ HAZARD_CP0
+ .set pop
+ .endm
+
+ .macro cachePr4450DCReset
+ .set push
+ .set noreorder
+ mfc0 t0, CP0_STATUS /* T0 = interrupt status on entry */
+ HAZARD_CP0
+ mtc0 zero, CP0_STATUS /* disable CPU interrupts */
+ HAZARD_CP0
+
+ /* Writeback/invalidate entire data cache sets/ways/lines */
+ or t1, zero, zero /* T1 = starting cache index (0) */
+ ori t2, zero, (DCACHE_SET_COUNT - 1) /* T2 = data cache set cnt - 1 */
+
+ dcache_wbinvd_loop:
+ /* 9 == register t1 */
+ .word CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \
+ (0 * DCACHE_SET_SIZE) /* writeback/invalidate WAY0 */
+ .word CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \
+ (1 * DCACHE_SET_SIZE) /* writeback/invalidate WAY1 */
+ .word CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \
+ (2 * DCACHE_SET_SIZE) /* writeback/invalidate WAY2 */
+ .word CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \
+ (3 * DCACHE_SET_SIZE) /* writeback/invalidate WAY3 */
+
+ addiu t1, t1, DCACHE_LINE_SIZE /* T1 = next data cache line index */
+ bne t2, zero, dcache_wbinvd_loop /* T2 = 0 when wbinvd entire cache */
+ addiu t2, t2, -1 /* decrement T2 set cnt (delay slot) */
+
+ /* Initialize the latches in the data cache tag that drive the way
+ selection tri-state bus drivers, by doing a dummy load while the
+ data cache is still in the disabled mode. TODO: Is this needed ? */
+ la t1, KSEG0 /* T1 = cached memory base address */
+ lw zero, 0x0000(t1) /* (dummy read of first memory word) */
+
+ mtc0 t0, CP0_STATUS /* restore interrupt status on entry */
+ HAZARD_CP0
+ .set pop
+ .endm
+
+#endif /* __ASM_MACH_KERNEL_ENTRY_INIT_H */
diff --git a/arch/mips/include/asm/mach-pnx8550/nand.h b/arch/mips/include/asm/mach-pnx8550/nand.h
new file mode 100644
index 00000000000..aefbc514ab0
--- /dev/null
+++ b/arch/mips/include/asm/mach-pnx8550/nand.h
@@ -0,0 +1,121 @@
+#ifndef __PNX8550_NAND_H
+#define __PNX8550_NAND_H
+
+#define PNX8550_NAND_BASE_ADDR 0x10000000
+#define PNX8550_PCIXIO_BASE 0xBBE40000
+
+#define PNX8550_DMA_EXT_ADDR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x800)
+#define PNX8550_DMA_INT_ADDR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x804)
+#define PNX8550_DMA_TRANS_SIZE *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x808)
+#define PNX8550_DMA_CTRL *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x80c)
+#define PNX8550_XIO_SEL0 *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x814)
+#define PNX8550_GPXIO_ADDR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x820)
+#define PNX8550_GPXIO_WR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x824)
+#define PNX8550_GPXIO_RD *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x828)
+#define PNX8550_GPXIO_CTRL *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x82C)
+#define PNX8550_XIO_FLASH_CTRL *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x830)
+#define PNX8550_GPXIO_INT_STATUS *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb0)
+#define PNX8550_GPXIO_INT_ENABLE *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb4)
+#define PNX8550_GPXIO_INT_CLEAR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb8)
+#define PNX8550_DMA_INT_STATUS *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd0)
+#define PNX8550_DMA_INT_ENABLE *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd4)
+#define PNX8550_DMA_INT_CLEAR *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd8)
+
+#define PNX8550_XIO_SEL0_EN_16BIT 0x00800000
+#define PNX8550_XIO_SEL0_USE_ACK 0x00400000
+#define PNX8550_XIO_SEL0_REN_HIGH 0x00100000
+#define PNX8550_XIO_SEL0_REN_LOW 0x00040000
+#define PNX8550_XIO_SEL0_WEN_HIGH 0x00010000
+#define PNX8550_XIO_SEL0_WEN_LOW 0x00004000
+#define PNX8550_XIO_SEL0_WAIT 0x00000200
+#define PNX8550_XIO_SEL0_OFFSET 0x00000020
+#define PNX8550_XIO_SEL0_TYPE_68360 0x00000000
+#define PNX8550_XIO_SEL0_TYPE_NOR 0x00000008
+#define PNX8550_XIO_SEL0_TYPE_NAND 0x00000010
+#define PNX8550_XIO_SEL0_TYPE_IDE 0x00000018
+#define PNX8550_XIO_SEL0_SIZE_8MB 0x00000000
+#define PNX8550_XIO_SEL0_SIZE_16MB 0x00000002
+#define PNX8550_XIO_SEL0_SIZE_32MB 0x00000004
+#define PNX8550_XIO_SEL0_SIZE_64MB 0x00000006
+#define PNX8550_XIO_SEL0_ENAB 0x00000001
+
+#define PNX8550_SEL0_DEFAULT ((PNX8550_XIO_SEL0_EN_16BIT) | \
+ (PNX8550_XIO_SEL0_REN_HIGH*0)| \
+ (PNX8550_XIO_SEL0_REN_LOW*2) | \
+ (PNX8550_XIO_SEL0_WEN_HIGH*0)| \
+ (PNX8550_XIO_SEL0_WEN_LOW*2) | \
+ (PNX8550_XIO_SEL0_WAIT*4) | \
+ (PNX8550_XIO_SEL0_OFFSET*0) | \
+ (PNX8550_XIO_SEL0_TYPE_NAND) | \
+ (PNX8550_XIO_SEL0_SIZE_32MB) | \
+ (PNX8550_XIO_SEL0_ENAB))
+
+#define PNX8550_GPXIO_PENDING 0x00000200
+#define PNX8550_GPXIO_DONE 0x00000100
+#define PNX8550_GPXIO_CLR_DONE 0x00000080
+#define PNX8550_GPXIO_INIT 0x00000040
+#define PNX8550_GPXIO_READ_CMD 0x00000010
+#define PNX8550_GPXIO_BEN 0x0000000F
+
+#define PNX8550_XIO_FLASH_64MB 0x00200000
+#define PNX8550_XIO_FLASH_INC_DATA 0x00100000
+#define PNX8550_XIO_FLASH_CMD_PH 0x000C0000
+#define PNX8550_XIO_FLASH_CMD_PH2 0x00080000
+#define PNX8550_XIO_FLASH_CMD_PH1 0x00040000
+#define PNX8550_XIO_FLASH_CMD_PH0 0x00000000
+#define PNX8550_XIO_FLASH_ADR_PH 0x00030000
+#define PNX8550_XIO_FLASH_ADR_PH3 0x00030000
+#define PNX8550_XIO_FLASH_ADR_PH2 0x00020000
+#define PNX8550_XIO_FLASH_ADR_PH1 0x00010000
+#define PNX8550_XIO_FLASH_ADR_PH0 0x00000000
+#define PNX8550_XIO_FLASH_CMD_B(x) ((x<<8) & 0x0000FF00)
+#define PNX8550_XIO_FLASH_CMD_A(x) (x & 0x000000FF)
+
+#define PNX8550_XIO_INT_ACK 0x00004000
+#define PNX8550_XIO_INT_COMPL 0x00002000
+#define PNX8550_XIO_INT_NONSUP 0x00000200
+#define PNX8550_XIO_INT_ABORT 0x00000004
+
+#define PNX8550_DMA_CTRL_SINGLE_DATA 0x00000400
+#define PNX8550_DMA_CTRL_SND2XIO 0x00000200
+#define PNX8550_DMA_CTRL_FIX_ADDR 0x00000100
+#define PNX8550_DMA_CTRL_BURST_8 0x00000000
+#define PNX8550_DMA_CTRL_BURST_16 0x00000020
+#define PNX8550_DMA_CTRL_BURST_32 0x00000040
+#define PNX8550_DMA_CTRL_BURST_64 0x00000060
+#define PNX8550_DMA_CTRL_BURST_128 0x00000080
+#define PNX8550_DMA_CTRL_BURST_256 0x000000A0
+#define PNX8550_DMA_CTRL_BURST_512 0x000000C0
+#define PNX8550_DMA_CTRL_BURST_NORES 0x000000E0
+#define PNX8550_DMA_CTRL_INIT_DMA 0x00000010
+#define PNX8550_DMA_CTRL_CMD_TYPE 0x0000000F
+
+/* see PCI system arch, page 100 for the full list: */
+#define PNX8550_DMA_CTRL_PCI_CMD_READ 0x00000006
+#define PNX8550_DMA_CTRL_PCI_CMD_WRITE 0x00000007
+
+#define PNX8550_DMA_INT_STAT_ACK_DONE (1<<14)
+#define PNX8550_DMA_INT_STAT_DMA_DONE (1<<12)
+#define PNX8550_DMA_INT_STAT_DMA_ERR (1<<9)
+#define PNX8550_DMA_INT_STAT_PERR5 (1<<5)
+#define PNX8550_DMA_INT_STAT_PERR4 (1<<4)
+#define PNX8550_DMA_INT_STAT_M_ABORT (1<<2)
+#define PNX8550_DMA_INT_STAT_T_ABORT (1<<1)
+
+#define PNX8550_DMA_INT_EN_ACK_DONE (1<<14)
+#define PNX8550_DMA_INT_EN_DMA_DONE (1<<12)
+#define PNX8550_DMA_INT_EN_DMA_ERR (1<<9)
+#define PNX8550_DMA_INT_EN_PERR5 (1<<5)
+#define PNX8550_DMA_INT_EN_PERR4 (1<<4)
+#define PNX8550_DMA_INT_EN_M_ABORT (1<<2)
+#define PNX8550_DMA_INT_EN_T_ABORT (1<<1)
+
+#define PNX8550_DMA_INT_CLR_ACK_DONE (1<<14)
+#define PNX8550_DMA_INT_CLR_DMA_DONE (1<<12)
+#define PNX8550_DMA_INT_CLR_DMA_ERR (1<<9)
+#define PNX8550_DMA_INT_CLR_PERR5 (1<<5)
+#define PNX8550_DMA_INT_CLR_PERR4 (1<<4)
+#define PNX8550_DMA_INT_CLR_M_ABORT (1<<2)
+#define PNX8550_DMA_INT_CLR_T_ABORT (1<<1)
+
+#endif
diff --git a/arch/mips/include/asm/mach-pnx8550/pci.h b/arch/mips/include/asm/mach-pnx8550/pci.h
new file mode 100644
index 00000000000..b921508d701
--- /dev/null
+++ b/arch/mips/include/asm/mach-pnx8550/pci.h
@@ -0,0 +1,185 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * PCI specific definitions
+ *
+ * Author: source@mvista.com
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+#ifndef __PNX8550_PCI_H
+#define __PNX8550_PCI_H
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#define PCI_ACCESS_READ 0
+#define PCI_ACCESS_WRITE 1
+
+#define PCI_CMD_IOR 0x20
+#define PCI_CMD_IOW 0x30
+#define PCI_CMD_CONFIG_READ 0xa0
+#define PCI_CMD_CONFIG_WRITE 0xb0
+
+#define PCI_IO_TIMEOUT 1000
+#define PCI_IO_RETRY 5
+/* Timeout for IO and CFG accesses.
+ This is in 1/1024 th of a jiffie(=10ms)
+ i.e. approx 10us */
+#define PCI_IO_JIFFIES_TIMEOUT 40
+#define PCI_IO_JIFFIES_SHIFT 10
+
+#define PCI_BYTE_ENABLE_MASK 0x0000000f
+#define PCI_CFG_BUS_SHIFT 16
+#define PCI_CFG_FUNC_SHIFT 8
+#define PCI_CFG_REG_SHIFT 2
+
+#define PCI_BASE 0x1be00000
+#define PCI_SETUP 0x00040010
+#define PCI_DIS_REQGNT (1<<30)
+#define PCI_DIS_REQGNTA (1<<29)
+#define PCI_DIS_REQGNTB (1<<28)
+#define PCI_D2_SUPPORT (1<<27)
+#define PCI_D1_SUPPORT (1<<26)
+#define PCI_EN_TA (1<<24)
+#define PCI_EN_PCI2MMI (1<<23)
+#define PCI_EN_XIO (1<<22)
+#define PCI_BASE18_PREF (1<<21)
+#define SIZE_16M 0x3
+#define SIZE_32M 0x4
+#define SIZE_64M 0x5
+#define SIZE_128M 0x6
+#define PCI_SETUP_BASE18_SIZE(X) (X<<18)
+#define PCI_SETUP_BASE18_EN (1<<17)
+#define PCI_SETUP_BASE14_PREF (1<<16)
+#define PCI_SETUP_BASE14_SIZE(X) (X<<12)
+#define PCI_SETUP_BASE14_EN (1<<11)
+#define PCI_SETUP_BASE10_PREF (1<<10)
+#define PCI_SETUP_BASE10_SIZE(X) (X<<7)
+#define PCI_SETUP_CFGMANAGE_EN (1<<1)
+#define PCI_SETUP_PCIARB_EN (1<<0)
+
+#define PCI_CTRL 0x040014
+#define PCI_SWPB_DCS_PCI (1<<16)
+#define PCI_SWPB_PCI_PCI (1<<15)
+#define PCI_SWPB_PCI_DCS (1<<14)
+#define PCI_REG_WR_POST (1<<13)
+#define PCI_XIO_WR_POST (1<<12)
+#define PCI_PCI2_WR_POST (1<<13)
+#define PCI_PCI1_WR_POST (1<<12)
+#define PCI_SERR_SEEN (1<<11)
+#define PCI_B10_SPEC_RD (1<<6)
+#define PCI_B14_SPEC_RD (1<<5)
+#define PCI_B18_SPEC_RD (1<<4)
+#define PCI_B10_NOSUBWORD (1<<3)
+#define PCI_B14_NOSUBWORD (1<<2)
+#define PCI_B18_NOSUBWORD (1<<1)
+#define PCI_RETRY_TMREN (1<<0)
+
+#define PCI_BASE1_LO 0x040018
+#define PCI_BASE1_HI 0x04001C
+#define PCI_BASE2_LO 0x040020
+#define PCI_BASE2_HI 0x040024
+#define PCI_RDLIFETIM 0x040028
+#define PCI_GPPM_ADDR 0x04002C
+#define PCI_GPPM_WDAT 0x040030
+#define PCI_GPPM_RDAT 0x040034
+#define PCI_GPPM_CTRL 0x040038
+#define GPPM_DONE (1<<10)
+#define INIT_PCI_CYCLE (1<<9)
+#define GPPM_CMD(X) (((X)&0xf)<<4)
+#define GPPM_BYTEEN(X) ((X)&0xf)
+#define PCI_UNLOCKREG 0x04003C
+#define UNLOCK_SSID(X) (((X)&0xff)<<8)
+#define UNLOCK_SETUP(X) (((X)&0xff)<<0)
+#define UNLOCK_MAGIC 0xCA
+#define PCI_DEV_VEND_ID 0x040040
+#define DEVICE_ID(X) (((X)>>16)&0xffff)
+#define VENDOR_ID(X) (((X)&0xffff))
+#define PCI_CFG_CMDSTAT 0x040044
+#define PCI_CFG_STATUS(X) (((X)>>16)&0xffff)
+#define PCI_CFG_COMMAND(X) ((X)&0xffff)
+#define PCI_CLASS_REV 0x040048
+#define PCI_CLASSCODE(X) (((X)>>8)&0xffffff)
+#define PCI_REVID(X) ((X)&0xff)
+#define PCI_LAT_TMR 0x04004c
+#define PCI_BASE10 0x040050
+#define PCI_BASE14 0x040054
+#define PCI_BASE18 0x040058
+#define PCI_SUBSYS_ID 0x04006c
+#define PCI_CAP_PTR 0x040074
+#define PCI_CFG_MISC 0x04007c
+#define PCI_PMC 0x040080
+#define PCI_PWR_STATE 0x040084
+#define PCI_IO 0x040088
+#define PCI_SLVTUNING 0x04008C
+#define PCI_DMATUNING 0x040090
+#define PCI_DMAEADDR 0x040800
+#define PCI_DMAIADDR 0x040804
+#define PCI_DMALEN 0x040808
+#define PCI_DMACTRL 0x04080C
+#define PCI_XIOCTRL 0x040810
+#define PCI_SEL0PROF 0x040814
+#define PCI_SEL1PROF 0x040818
+#define PCI_SEL2PROF 0x04081C
+#define PCI_GPXIOADDR 0x040820
+#define PCI_NANDCTRLS 0x400830
+#define PCI_SEL3PROF 0x040834
+#define PCI_SEL4PROF 0x040838
+#define PCI_GPXIO_STAT 0x040FB0
+#define PCI_GPXIO_IMASK 0x040FB4
+#define PCI_GPXIO_ICLR 0x040FB8
+#define PCI_GPXIO_ISET 0x040FBC
+#define PCI_GPPM_STATUS 0x040FC0
+#define GPPM_DONE (1<<10)
+#define GPPM_ERR (1<<9)
+#define GPPM_MPAR_ERR (1<<8)
+#define GPPM_PAR_ERR (1<<7)
+#define GPPM_R_MABORT (1<<2)
+#define GPPM_R_TABORT (1<<1)
+#define PCI_GPPM_IMASK 0x040FC4
+#define PCI_GPPM_ICLR 0x040FC8
+#define PCI_GPPM_ISET 0x040FCC
+#define PCI_DMA_STATUS 0x040FD0
+#define PCI_DMA_IMASK 0x040FD4
+#define PCI_DMA_ICLR 0x040FD8
+#define PCI_DMA_ISET 0x040FDC
+#define PCI_ISTATUS 0x040FE0
+#define PCI_IMASK 0x040FE4
+#define PCI_ICLR 0x040FE8
+#define PCI_ISET 0x040FEC
+#define PCI_MOD_ID 0x040FFC
+
+/*
+ * PCI configuration cycle AD bus definition
+ */
+/* Type 0 */
+#define PCI_CFG_TYPE0_REG_SHF 0
+#define PCI_CFG_TYPE0_FUNC_SHF 8
+
+/* Type 1 */
+#define PCI_CFG_TYPE1_REG_SHF 0
+#define PCI_CFG_TYPE1_FUNC_SHF 8
+#define PCI_CFG_TYPE1_DEV_SHF 11
+#define PCI_CFG_TYPE1_BUS_SHF 16
+
+/*
+ * Ethernet device DP83816 definition
+ */
+#define DP83816_IRQ_ETHER 66
+
+#endif
diff --git a/arch/mips/include/asm/mach-pnx8550/uart.h b/arch/mips/include/asm/mach-pnx8550/uart.h
new file mode 100644
index 00000000000..ad7608d4487
--- /dev/null
+++ b/arch/mips/include/asm/mach-pnx8550/uart.h
@@ -0,0 +1,30 @@
+#ifndef __IP3106_UART_H
+#define __IP3106_UART_H
+
+#include <int.h>
+
+/* early macros for kgdb use. fixme: clean this up */
+
+#define UART_BASE 0xbbe4a000 /* PNX8550 */
+
+#define PNX8550_UART_PORT0 (UART_BASE)
+#define PNX8550_UART_PORT1 (UART_BASE + 0x1000)
+
+#define PNX8550_UART_INT(x) (PNX8550_INT_GIC_MIN+19+x)
+#define IRQ_TO_UART(x) (x-PNX8550_INT_GIC_MIN-19)
+
+/* early macros needed for prom/kgdb */
+
+#define ip3106_lcr(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x000)
+#define ip3106_mcr(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x004)
+#define ip3106_baud(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x008)
+#define ip3106_cfg(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x00C)
+#define ip3106_fifo(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x028)
+#define ip3106_istat(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFE0)
+#define ip3106_ien(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFE4)
+#define ip3106_iclr(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFE8)
+#define ip3106_iset(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFEC)
+#define ip3106_pd(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFF4)
+#define ip3106_mid(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFFC)
+
+#endif
diff --git a/arch/mips/include/asm/mach-pnx8550/usb.h b/arch/mips/include/asm/mach-pnx8550/usb.h
new file mode 100644
index 00000000000..483b7fc65d4
--- /dev/null
+++ b/arch/mips/include/asm/mach-pnx8550/usb.h
@@ -0,0 +1,32 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * USB specific definitions
+ *
+ * Author: source@mvista.com
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+#ifndef __PNX8550_USB_H
+#define __PNX8550_USB_H
+
+/*
+ * USB Host controller
+ */
+
+#define PNX8550_USB_OHCI_OP_BASE 0x1be48000
+#define PNX8550_USB_OHCI_OP_LEN 0x1000
+
+#endif
diff --git a/arch/mips/include/asm/mach-pnx8550/war.h b/arch/mips/include/asm/mach-pnx8550/war.h
new file mode 100644
index 00000000000..d0458dd082f
--- /dev/null
+++ b/arch/mips/include/asm/mach-pnx8550/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_PNX8550_WAR_H
+#define __ASM_MIPS_MACH_PNX8550_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_PNX8550_WAR_H */
diff --git a/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h b/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h
new file mode 100644
index 00000000000..f3bc7efa260
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h
@@ -0,0 +1,81 @@
+/*
+ * IDT RC32434 specific CPU feature overrides
+ *
+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
+ *
+ * This file was derived from: include/asm-mips/cpu-features.h
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ * Copyright (C) 2004 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+#ifndef __ASM_MACH_RC32434_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_RC32434_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * The IDT RC32434 SOC has a built-in MIPS 4Kc core.
+ */
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_3k_cache 0
+#define cpu_has_4k_cache 1
+#define cpu_has_tx39_cache 0
+#define cpu_has_sb1_cache 0
+#define cpu_has_fpu 0
+#define cpu_has_32fpr 0
+#define cpu_has_counter 1
+#define cpu_has_watch 1
+#define cpu_has_divec 1
+#define cpu_has_vce 0
+#define cpu_has_cache_cdex_p 0
+#define cpu_has_cache_cdex_s 0
+#define cpu_has_prefetch 1
+#define cpu_has_mcheck 1
+#define cpu_has_ejtag 1
+#define cpu_has_llsc 1
+
+#define cpu_has_mips16 0
+#define cpu_has_mdmx 0
+#define cpu_has_mips3d 0
+#define cpu_has_smartmips 0
+
+#define cpu_has_vtag_icache 0
+/* #define cpu_has_dc_aliases ? */
+/* #define cpu_has_ic_fills_f_dc ? */
+/* #define cpu_has_pindexed_dcache ? */
+
+/* #define cpu_icache_snoops_remote_store ? */
+
+#define cpu_has_mips32r1 1
+#define cpu_has_mips32r2 0
+#define cpu_has_mips64r1 0
+#define cpu_has_mips64r2 0
+
+#define cpu_has_dsp 0
+#define cpu_has_mipsmt 0
+
+/* #define cpu_has_nofpuex ? */
+#define cpu_has_64bits 0
+#define cpu_has_64bit_zero_reg 0
+#define cpu_has_64bit_gp_regs 0
+#define cpu_has_64bit_addresses 0
+
+#define cpu_has_inclusive_pcaches 0
+
+#define cpu_dcache_line_size() 16
+#define cpu_icache_line_size() 16
+
+#endif /* __ASM_MACH_RC32434_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-rc32434/ddr.h b/arch/mips/include/asm/mach-rc32434/ddr.h
new file mode 100644
index 00000000000..291e2cf9dde
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/ddr.h
@@ -0,0 +1,141 @@
+/*
+ * Definitions for the DDR registers
+ *
+ * Copyright 2002 Ryan Holm <ryan.holmQVist@idt.com>
+ * Copyright 2008 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef _ASM_RC32434_DDR_H_
+#define _ASM_RC32434_DDR_H_
+
+#include <asm/mach-rc32434/rb.h>
+
+/* DDR register structure */
+struct ddr_ram {
+ u32 ddrbase;
+ u32 ddrmask;
+ u32 res1;
+ u32 res2;
+ u32 ddrc;
+ u32 ddrabase;
+ u32 ddramask;
+ u32 ddramap;
+ u32 ddrcust;
+ u32 ddrrdc;
+ u32 ddrspare;
+};
+
+#define DDR0_PHYS_ADDR 0x18018000
+
+/* DDR banks masks */
+#define DDR_MASK 0xffff0000
+#define DDR0_BASE_MSK DDR_MASK
+#define DDR1_BASE_MSK DDR_MASK
+
+/* DDR bank0 registers */
+#define RC32434_DDR0_ATA_BIT 5
+#define RC32434_DDR0_ATA_MSK 0x000000E0
+#define RC32434_DDR0_DBW_BIT 8
+#define RC32434_DDR0_DBW_MSK 0x00000100
+#define RC32434_DDR0_WR_BIT 9
+#define RC32434_DDR0_WR_MSK 0x00000600
+#define RC32434_DDR0_PS_BIT 11
+#define RC32434_DDR0_PS_MSK 0x00001800
+#define RC32434_DDR0_DTYPE_BIT 13
+#define RC32434_DDR0_DTYPE_MSK 0x0000e000
+#define RC32434_DDR0_RFC_BIT 16
+#define RC32434_DDR0_RFC_MSK 0x000f0000
+#define RC32434_DDR0_RP_BIT 20
+#define RC32434_DDR0_RP_MSK 0x00300000
+#define RC32434_DDR0_AP_BIT 22
+#define RC32434_DDR0_AP_MSK 0x00400000
+#define RC32434_DDR0_RCD_BIT 23
+#define RC32434_DDR0_RCD_MSK 0x01800000
+#define RC32434_DDR0_CL_BIT 25
+#define RC32434_DDR0_CL_MSK 0x06000000
+#define RC32434_DDR0_DBM_BIT 27
+#define RC32434_DDR0_DBM_MSK 0x08000000
+#define RC32434_DDR0_SDS_BIT 28
+#define RC32434_DDR0_SDS_MSK 0x10000000
+#define RC32434_DDR0_ATP_BIT 29
+#define RC32434_DDR0_ATP_MSK 0x60000000
+#define RC32434_DDR0_RE_BIT 31
+#define RC32434_DDR0_RE_MSK 0x80000000
+
+/* DDR bank C registers */
+#define RC32434_DDRC_MSK(x) BIT_TO_MASK(x)
+#define RC32434_DDRC_CES_BIT 0
+#define RC32434_DDRC_ACE_BIT 1
+
+/* Custom DDR bank registers */
+#define RC32434_DCST_MSK(x) BIT_TO_MASK(x)
+#define RC32434_DCST_CS_BIT 0
+#define RC32434_DCST_CS_MSK 0x00000003
+#define RC32434_DCST_WE_BIT 2
+#define RC32434_DCST_RAS_BIT 3
+#define RC32434_DCST_CAS_BIT 4
+#define RC32434_DSCT_CKE_BIT 5
+#define RC32434_DSCT_BA_BIT 6
+#define RC32434_DSCT_BA_MSK 0x000000c0
+
+/* DDR QSC registers */
+#define RC32434_QSC_DM_BIT 0
+#define RC32434_QSC_DM_MSK 0x00000003
+#define RC32434_QSC_DQSBS_BIT 2
+#define RC32434_QSC_DQSBS_MSK 0x000000fc
+#define RC32434_QSC_DB_BIT 8
+#define RC32434_QSC_DB_MSK 0x00000100
+#define RC32434_QSC_DBSP_BIT 9
+#define RC32434_QSC_DBSP_MSK 0x01fffe00
+#define RC32434_QSC_BDP_BIT 25
+#define RC32434_QSC_BDP_MSK 0x7e000000
+
+/* DDR LLC registers */
+#define RC32434_LLC_EAO_BIT 0
+#define RC32434_LLC_EAO_MSK 0x00000001
+#define RC32434_LLC_EO_BIT 1
+#define RC32434_LLC_EO_MSK 0x0000003e
+#define RC32434_LLC_FS_BIT 6
+#define RC32434_LLC_FS_MSK 0x000000c0
+#define RC32434_LLC_AS_BIT 8
+#define RC32434_LLC_AS_MSK 0x00000700
+#define RC32434_LLC_SP_BIT 11
+#define RC32434_LLC_SP_MSK 0x001ff800
+
+/* DDR LLFC registers */
+#define RC32434_LLFC_MSK(x) BIT_TO_MASK(x)
+#define RC32434_LLFC_MEN_BIT 0
+#define RC32434_LLFC_EAN_BIT 1
+#define RC32434_LLFC_FF_BIT 2
+
+/* DDR DLLTA registers */
+#define RC32434_DLLTA_ADDR_BIT 2
+#define RC32434_DLLTA_ADDR_MSK 0xfffffffc
+
+/* DDR DLLED registers */
+#define RC32434_DLLED_MSK(x) BIT_TO_MASK(x)
+#define RC32434_DLLED_DBE_BIT 0
+#define RC32434_DLLED_DTE_BIT 1
+
+#endif /* _ASM_RC32434_DDR_H_ */
diff --git a/arch/mips/include/asm/mach-rc32434/dma.h b/arch/mips/include/asm/mach-rc32434/dma.h
new file mode 100644
index 00000000000..5f898b5873f
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/dma.h
@@ -0,0 +1,103 @@
+/*
+ * Copyright 2002 Integrated Device Technology, Inc.
+ * All rights reserved.
+ *
+ * DMA register definition.
+ *
+ * Author : ryan.holmQVist@idt.com
+ * Date : 20011005
+ */
+
+#ifndef __ASM_RC32434_DMA_H
+#define __ASM_RC32434_DMA_H
+
+#include <asm/mach-rc32434/rb.h>
+
+#define DMA0_BASE_ADDR 0x18040000
+
+/*
+ * DMA descriptor (in physical memory).
+ */
+
+struct dma_desc {
+ u32 control; /* Control. use DMAD_* */
+ u32 ca; /* Current Address. */
+ u32 devcs; /* Device control and status. */
+ u32 link; /* Next descriptor in chain. */
+};
+
+#define DMA_DESC_SIZ sizeof(struct dma_desc)
+#define DMA_DESC_COUNT_BIT 0
+#define DMA_DESC_COUNT_MSK 0x0003ffff
+#define DMA_DESC_DS_BIT 20
+#define DMA_DESC_DS_MSK 0x00300000
+
+#define DMA_DESC_DEV_CMD_BIT 22
+#define DMA_DESC_DEV_CMD_MSK 0x01c00000
+
+/* DMA command sizes */
+#define DMA_DESC_DEV_CMD_BYTE 0
+#define DMA_DESC_DEV_CMD_HLF_WD 1
+#define DMA_DESC_DEV_CMD_WORD 2
+#define DMA_DESC_DEV_CMD_2WORDS 3
+#define DMA_DESC_DEV_CMD_4WORDS 4
+#define DMA_DESC_DEV_CMD_6WORDS 5
+#define DMA_DESC_DEV_CMD_8WORDS 6
+#define DMA_DESC_DEV_CMD_16WORDS 7
+
+/* DMA descriptors interrupts */
+#define DMA_DESC_COF (1 << 25) /* Chain on finished */
+#define DMA_DESC_COD (1 << 26) /* Chain on done */
+#define DMA_DESC_IOF (1 << 27) /* Interrupt on finished */
+#define DMA_DESC_IOD (1 << 28) /* Interrupt on done */
+#define DMA_DESC_TERM (1 << 29) /* Terminated */
+#define DMA_DESC_DONE (1 << 30) /* Done */
+#define DMA_DESC_FINI (1 << 31) /* Finished */
+
+/*
+ * DMA register (within Internal Register Map).
+ */
+
+struct dma_reg {
+ u32 dmac; /* Control. */
+ u32 dmas; /* Status. */
+ u32 dmasm; /* Mask. */
+ u32 dmadptr; /* Descriptor pointer. */
+ u32 dmandptr; /* Next descriptor pointer. */
+};
+
+/* DMA channels specific registers */
+#define DMA_CHAN_RUN_BIT (1 << 0)
+#define DMA_CHAN_DONE_BIT (1 << 1)
+#define DMA_CHAN_MODE_BIT (1 << 2)
+#define DMA_CHAN_MODE_MSK 0x0000000c
+#define DMA_CHAN_MODE_AUTO 0
+#define DMA_CHAN_MODE_BURST 1
+#define DMA_CHAN_MODE_XFRT 2
+#define DMA_CHAN_MODE_RSVD 3
+#define DMA_CHAN_ACT_BIT (1 << 4)
+
+/* DMA status registers */
+#define DMA_STAT_FINI (1 << 0)
+#define DMA_STAT_DONE (1 << 1)
+#define DMA_STAT_CHAIN (1 << 2)
+#define DMA_STAT_ERR (1 << 3)
+#define DMA_STAT_HALT (1 << 4)
+
+/*
+ * DMA channel definitions
+ */
+
+#define DMA_CHAN_ETH_RCV 0
+#define DMA_CHAN_ETH_XMT 1
+#define DMA_CHAN_MEM_TO_FIFO 2
+#define DMA_CHAN_FIFO_TO_MEM 3
+#define DMA_CHAN_PCI_TO_MEM 4
+#define DMA_CHAN_MEM_TO_PCI 5
+#define DMA_CHAN_COUNT 6
+
+struct dma_channel {
+ struct dma_reg ch[DMA_CHAN_COUNT];
+};
+
+#endif /* __ASM_RC32434_DMA_H */
diff --git a/arch/mips/include/asm/mach-rc32434/dma_v.h b/arch/mips/include/asm/mach-rc32434/dma_v.h
new file mode 100644
index 00000000000..173a9f9146c
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/dma_v.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2002 Integrated Device Technology, Inc.
+ * All rights reserved.
+ *
+ * DMA register definition.
+ *
+ * Author : ryan.holmQVist@idt.com
+ * Date : 20011005
+ */
+
+#ifndef _ASM_RC32434_DMA_V_H_
+#define _ASM_RC32434_DMA_V_H_
+
+#include <asm/mach-rc32434/dma.h>
+#include <asm/mach-rc32434/rc32434.h>
+
+#define DMA_CHAN_OFFSET 0x14
+#define IS_DMA_USED(X) (((X) & \
+ (DMA_DESC_FINI | DMA_DESC_DONE | DMA_DESC_TERM)) \
+ != 0)
+#define DMA_COUNT(count) ((count) & DMA_DESC_COUNT_MSK)
+
+#define DMA_HALT_TIMEOUT 500
+
+static inline int rc32434_halt_dma(struct dma_reg *ch)
+{
+ int timeout = 1;
+ if (__raw_readl(&ch->dmac) & DMA_CHAN_RUN_BIT) {
+ __raw_writel(0, &ch->dmac);
+ for (timeout = DMA_HALT_TIMEOUT; timeout > 0; timeout--) {
+ if (__raw_readl(&ch->dmas) & DMA_STAT_HALT) {
+ __raw_writel(0, &ch->dmas);
+ break;
+ }
+ }
+ }
+
+ return timeout ? 0 : 1;
+}
+
+static inline void rc32434_start_dma(struct dma_reg *ch, u32 dma_addr)
+{
+ __raw_writel(0, &ch->dmandptr);
+ __raw_writel(dma_addr, &ch->dmadptr);
+}
+
+static inline void rc32434_chain_dma(struct dma_reg *ch, u32 dma_addr)
+{
+ __raw_writel(dma_addr, &ch->dmandptr);
+}
+
+#endif /* _ASM_RC32434_DMA_V_H_ */
diff --git a/arch/mips/include/asm/mach-rc32434/eth.h b/arch/mips/include/asm/mach-rc32434/eth.h
new file mode 100644
index 00000000000..a25cbc56173
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/eth.h
@@ -0,0 +1,220 @@
+/*
+ * Definitions for the Ethernet registers
+ *
+ * Copyright 2002 Allend Stichter <allen.stichter@idt.com>
+ * Copyright 2008 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __ASM_RC32434_ETH_H
+#define __ASM_RC32434_ETH_H
+
+
+#define ETH0_BASE_ADDR 0x18060000
+
+struct eth_regs {
+ u32 ethintfc;
+ u32 ethfifott;
+ u32 etharc;
+ u32 ethhash0;
+ u32 ethhash1;
+ u32 ethu0[4]; /* Reserved. */
+ u32 ethpfs;
+ u32 ethmcp;
+ u32 eth_u1[10]; /* Reserved. */
+ u32 ethspare;
+ u32 eth_u2[42]; /* Reserved. */
+ u32 ethsal0;
+ u32 ethsah0;
+ u32 ethsal1;
+ u32 ethsah1;
+ u32 ethsal2;
+ u32 ethsah2;
+ u32 ethsal3;
+ u32 ethsah3;
+ u32 ethrbc;
+ u32 ethrpc;
+ u32 ethrupc;
+ u32 ethrfc;
+ u32 ethtbc;
+ u32 ethgpf;
+ u32 eth_u9[50]; /* Reserved. */
+ u32 ethmac1;
+ u32 ethmac2;
+ u32 ethipgt;
+ u32 ethipgr;
+ u32 ethclrt;
+ u32 ethmaxf;
+ u32 eth_u10; /* Reserved. */
+ u32 ethmtest;
+ u32 miimcfg;
+ u32 miimcmd;
+ u32 miimaddr;
+ u32 miimwtd;
+ u32 miimrdd;
+ u32 miimind;
+ u32 eth_u11; /* Reserved. */
+ u32 eth_u12; /* Reserved. */
+ u32 ethcfsa0;
+ u32 ethcfsa1;
+ u32 ethcfsa2;
+};
+
+/* Ethernet interrupt registers */
+#define ETH_INT_FC_EN (1 << 0)
+#define ETH_INT_FC_ITS (1 << 1)
+#define ETH_INT_FC_RIP (1 << 2)
+#define ETH_INT_FC_JAM (1 << 3)
+#define ETH_INT_FC_OVR (1 << 4)
+#define ETH_INT_FC_UND (1 << 5)
+#define ETH_INT_FC_IOC 0x000000c0
+
+/* Ethernet FIFO registers */
+#define ETH_FIFI_TT_TTH_BIT 0
+#define ETH_FIFO_TT_TTH 0x0000007f
+
+/* Ethernet ARC/multicast registers */
+#define ETH_ARC_PRO (1 << 0)
+#define ETH_ARC_AM (1 << 1)
+#define ETH_ARC_AFM (1 << 2)
+#define ETH_ARC_AB (1 << 3)
+
+/* Ethernet SAL registers */
+#define ETH_SAL_BYTE_5 0x000000ff
+#define ETH_SAL_BYTE_4 0x0000ff00
+#define ETH_SAL_BYTE_3 0x00ff0000
+#define ETH_SAL_BYTE_2 0xff000000
+
+/* Ethernet SAH registers */
+#define ETH_SAH_BYTE1 0x000000ff
+#define ETH_SAH_BYTE0 0x0000ff00
+
+/* Ethernet GPF register */
+#define ETH_GPF_PTV 0x0000ffff
+
+/* Ethernet PFG register */
+#define ETH_PFS_PFD (1 << 0)
+
+/* Ethernet CFSA[0-3] registers */
+#define ETH_CFSA0_CFSA4 0x000000ff
+#define ETH_CFSA0_CFSA5 0x0000ff00
+#define ETH_CFSA1_CFSA2 0x000000ff
+#define ETH_CFSA1_CFSA3 0x0000ff00
+#define ETH_CFSA1_CFSA0 0x000000ff
+#define ETH_CFSA1_CFSA1 0x0000ff00
+
+/* Ethernet MAC1 registers */
+#define ETH_MAC1_RE (1 << 0)
+#define ETH_MAC1_PAF (1 << 1)
+#define ETH_MAC1_RFC (1 << 2)
+#define ETH_MAC1_TFC (1 << 3)
+#define ETH_MAC1_LB (1 << 4)
+#define ETH_MAC1_MR (1 << 31)
+
+/* Ethernet MAC2 registers */
+#define ETH_MAC2_FD (1 << 0)
+#define ETH_MAC2_FLC (1 << 1)
+#define ETH_MAC2_HFE (1 << 2)
+#define ETH_MAC2_DC (1 << 3)
+#define ETH_MAC2_CEN (1 << 4)
+#define ETH_MAC2_PE (1 << 5)
+#define ETH_MAC2_VPE (1 << 6)
+#define ETH_MAC2_APE (1 << 7)
+#define ETH_MAC2_PPE (1 << 8)
+#define ETH_MAC2_LPE (1 << 9)
+#define ETH_MAC2_NB (1 << 12)
+#define ETH_MAC2_BP (1 << 13)
+#define ETH_MAC2_ED (1 << 14)
+
+/* Ethernet IPGT register */
+#define ETH_IPGT 0x0000007f
+
+/* Ethernet IPGR registers */
+#define ETH_IPGR_IPGR2 0x0000007f
+#define ETH_IPGR_IPGR1 0x00007f00
+
+/* Ethernet CLRT registers */
+#define ETH_CLRT_MAX_RET 0x0000000f
+#define ETH_CLRT_COL_WIN 0x00003f00
+
+/* Ethernet MAXF register */
+#define ETH_MAXF 0x0000ffff
+
+/* Ethernet test registers */
+#define ETH_TEST_REG (1 << 2)
+#define ETH_MCP_DIV 0x000000ff
+
+/* MII registers */
+#define ETH_MII_CFG_RSVD 0x0000000c
+#define ETH_MII_CMD_RD (1 << 0)
+#define ETH_MII_CMD_SCN (1 << 1)
+#define ETH_MII_REG_ADDR 0x0000001f
+#define ETH_MII_PHY_ADDR 0x00001f00
+#define ETH_MII_WTD_DATA 0x0000ffff
+#define ETH_MII_RDD_DATA 0x0000ffff
+#define ETH_MII_IND_BSY (1 << 0)
+#define ETH_MII_IND_SCN (1 << 1)
+#define ETH_MII_IND_NV (1 << 2)
+
+/*
+ * Values for the DEVCS field of the Ethernet DMA Rx and Tx descriptors.
+ */
+
+#define ETH_RX_FD (1 << 0)
+#define ETH_RX_LD (1 << 1)
+#define ETH_RX_ROK (1 << 2)
+#define ETH_RX_FM (1 << 3)
+#define ETH_RX_MP (1 << 4)
+#define ETH_RX_BP (1 << 5)
+#define ETH_RX_VLT (1 << 6)
+#define ETH_RX_CF (1 << 7)
+#define ETH_RX_OVR (1 << 8)
+#define ETH_RX_CRC (1 << 9)
+#define ETH_RX_CV (1 << 10)
+#define ETH_RX_DB (1 << 11)
+#define ETH_RX_LE (1 << 12)
+#define ETH_RX_LOR (1 << 13)
+#define ETH_RX_CES (1 << 14)
+#define ETH_RX_LEN_BIT 16
+#define ETH_RX_LEN 0xffff0000
+
+#define ETH_TX_FD (1 << 0)
+#define ETH_TX_LD (1 << 1)
+#define ETH_TX_OEN (1 << 2)
+#define ETH_TX_PEN (1 << 3)
+#define ETH_TX_CEN (1 << 4)
+#define ETH_TX_HEN (1 << 5)
+#define ETH_TX_TOK (1 << 6)
+#define ETH_TX_MP (1 << 7)
+#define ETH_TX_BP (1 << 8)
+#define ETH_TX_UND (1 << 9)
+#define ETH_TX_OF (1 << 10)
+#define ETH_TX_ED (1 << 11)
+#define ETH_TX_EC (1 << 12)
+#define ETH_TX_LC (1 << 13)
+#define ETH_TX_TD (1 << 14)
+#define ETH_TX_CRC (1 << 15)
+#define ETH_TX_LE (1 << 16)
+#define ETH_TX_CC 0x001E0000
+
+#endif /* __ASM_RC32434_ETH_H */
diff --git a/arch/mips/include/asm/mach-rc32434/gpio.h b/arch/mips/include/asm/mach-rc32434/gpio.h
new file mode 100644
index 00000000000..c8e554eafce
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/gpio.h
@@ -0,0 +1,88 @@
+/*
+ * Copyright 2002 Integrated Device Technology, Inc.
+ * All rights reserved.
+ *
+ * GPIO register definition.
+ *
+ * Author : ryan.holmQVist@idt.com
+ * Date : 20011005
+ * Copyright (C) 2001, 2002 Ryan Holm <ryan.holmQVist@idt.com>
+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
+ */
+
+#ifndef _RC32434_GPIO_H_
+#define _RC32434_GPIO_H_
+
+#include <linux/types.h>
+#include <asm-generic/gpio.h>
+
+#define NR_BUILTIN_GPIO 32
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+
+#define gpio_to_irq(gpio) (8 + 4 * 32 + gpio)
+#define irq_to_gpio(irq) (irq - (8 + 4 * 32))
+
+struct rb532_gpio_reg {
+ u32 gpiofunc; /* GPIO Function Register
+ * gpiofunc[x]==0 bit = gpio
+ * func[x]==1 bit = altfunc
+ */
+ u32 gpiocfg; /* GPIO Configuration Register
+ * gpiocfg[x]==0 bit = input
+ * gpiocfg[x]==1 bit = output
+ */
+ u32 gpiod; /* GPIO Data Register
+ * gpiod[x] read/write gpio pinX status
+ */
+ u32 gpioilevel; /* GPIO Interrupt Status Register
+ * interrupt level (see gpioistat)
+ */
+ u32 gpioistat; /* Gpio Interrupt Status Register
+ * istat[x] = (gpiod[x] == level[x])
+ * cleared in ISR (STICKY bits)
+ */
+ u32 gpionmien; /* GPIO Non-maskable Interrupt Enable Register */
+};
+
+/* UART GPIO signals */
+#define RC32434_UART0_SOUT (1 << 0)
+#define RC32434_UART0_SIN (1 << 1)
+#define RC32434_UART0_RTS (1 << 2)
+#define RC32434_UART0_CTS (1 << 3)
+
+/* M & P bus GPIO signals */
+#define RC32434_MP_BIT_22 (1 << 4)
+#define RC32434_MP_BIT_23 (1 << 5)
+#define RC32434_MP_BIT_24 (1 << 6)
+#define RC32434_MP_BIT_25 (1 << 7)
+
+/* CPU GPIO signals */
+#define RC32434_CPU_GPIO (1 << 8)
+
+/* Reserved GPIO signals */
+#define RC32434_AF_SPARE_6 (1 << 9)
+#define RC32434_AF_SPARE_4 (1 << 10)
+#define RC32434_AF_SPARE_3 (1 << 11)
+#define RC32434_AF_SPARE_2 (1 << 12)
+
+/* PCI messaging unit */
+#define RC32434_PCI_MSU_GPIO (1 << 13)
+
+/* NAND GPIO signals */
+#define GPIO_RDY 8
+#define GPIO_WPX 9
+#define GPIO_ALE 10
+#define GPIO_CLE 11
+
+/* Compact Flash GPIO pin */
+#define CF_GPIO_NUM 13
+
+extern void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val);
+extern unsigned get_434_reg(unsigned reg_offs);
+extern void set_latch_u5(unsigned char or_mask, unsigned char nand_mask);
+extern unsigned char get_latch_u5(void);
+
+#endif /* _RC32434_GPIO_H_ */
diff --git a/arch/mips/include/asm/mach-rc32434/integ.h b/arch/mips/include/asm/mach-rc32434/integ.h
new file mode 100644
index 00000000000..fa65bc3d880
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/integ.h
@@ -0,0 +1,59 @@
+/*
+ * Definitions for the Watchdog registers
+ *
+ * Copyright 2002 Ryan Holm <ryan.holmQVist@idt.com>
+ * Copyright 2008 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __RC32434_INTEG_H__
+#define __RC32434_INTEG_H__
+
+#include <asm/mach-rc32434/rb.h>
+
+#define INTEG0_BASE_ADDR 0x18030030
+
+struct integ {
+ u32 errcs; /* sticky use ERRCS_ */
+ u32 wtcount; /* Watchdog timer count reg. */
+ u32 wtcompare; /* Watchdog timer timeout value. */
+ u32 wtc; /* Watchdog timer control. use WTC_ */
+};
+
+/* Error counters */
+#define RC32434_ERR_WTO 0
+#define RC32434_ERR_WNE 1
+#define RC32434_ERR_UCW 2
+#define RC32434_ERR_UCR 3
+#define RC32434_ERR_UPW 4
+#define RC32434_ERR_UPR 5
+#define RC32434_ERR_UDW 6
+#define RC32434_ERR_UDR 7
+#define RC32434_ERR_SAE 8
+#define RC32434_ERR_WRE 9
+
+/* Watchdog control bits */
+#define RC32434_WTC_EN 0
+#define RC32434_WTC_TO 1
+
+#endif /* __RC32434_INTEG_H__ */
diff --git a/arch/mips/include/asm/mach-rc32434/irq.h b/arch/mips/include/asm/mach-rc32434/irq.h
new file mode 100644
index 00000000000..56738d8ec4e
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/irq.h
@@ -0,0 +1,33 @@
+#ifndef __ASM_RC32434_IRQ_H
+#define __ASM_RC32434_IRQ_H
+
+#define NR_IRQS 256
+
+#include <asm/mach-generic/irq.h>
+#include <asm/mach-rc32434/rb.h>
+
+/* Interrupt Controller */
+#define IC_GROUP0_PEND (REGBASE + 0x38000)
+#define IC_GROUP0_MASK (REGBASE + 0x38008)
+#define IC_GROUP_OFFSET 0x0C
+
+#define NUM_INTR_GROUPS 5
+
+/* 16550 UARTs */
+#define GROUP0_IRQ_BASE 8 /* GRP2 IRQ numbers start here */
+ /* GRP3 IRQ numbers start here */
+#define GROUP1_IRQ_BASE (GROUP0_IRQ_BASE + 32)
+ /* GRP4 IRQ numbers start here */
+#define GROUP2_IRQ_BASE (GROUP1_IRQ_BASE + 32)
+ /* GRP5 IRQ numbers start here */
+#define GROUP3_IRQ_BASE (GROUP2_IRQ_BASE + 32)
+#define GROUP4_IRQ_BASE (GROUP3_IRQ_BASE + 32)
+
+#define UART0_IRQ (GROUP3_IRQ_BASE + 0)
+
+#define ETH0_DMA_RX_IRQ (GROUP1_IRQ_BASE + 0)
+#define ETH0_DMA_TX_IRQ (GROUP1_IRQ_BASE + 1)
+#define ETH0_RX_OVR_IRQ (GROUP3_IRQ_BASE + 9)
+#define ETH0_TX_UND_IRQ (GROUP3_IRQ_BASE + 10)
+
+#endif /* __ASM_RC32434_IRQ_H */
diff --git a/arch/mips/include/asm/mach-rc32434/pci.h b/arch/mips/include/asm/mach-rc32434/pci.h
new file mode 100644
index 00000000000..410638f2af7
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/pci.h
@@ -0,0 +1,481 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Copyright 2004 IDT Inc. (rischelp@idt.com)
+ *
+ * Initial Release
+ */
+
+#ifndef _ASM_RC32434_PCI_H_
+#define _ASM_RC32434_PCI_H_
+
+#define epld_mask ((volatile unsigned char *)0xB900000d)
+
+#define PCI0_BASE_ADDR 0x18080000
+#define PCI_LBA_COUNT 4
+
+struct pci_map {
+ u32 address; /* Address. */
+ u32 control; /* Control. */
+ u32 mapping; /* mapping. */
+};
+
+struct pci_reg {
+ u32 pcic;
+ u32 pcis;
+ u32 pcism;
+ u32 pcicfga;
+ u32 pcicfgd;
+ volatile struct pci_map pcilba[PCI_LBA_COUNT];
+ u32 pcidac;
+ u32 pcidas;
+ u32 pcidasm;
+ u32 pcidad;
+ u32 pcidma8c;
+ u32 pcidma9c;
+ u32 pcitc;
+};
+
+#define PCI_MSU_COUNT 2
+
+struct pci_msu {
+ u32 pciim[PCI_MSU_COUNT];
+ u32 pciom[PCI_MSU_COUNT];
+ u32 pciid;
+ u32 pciiic;
+ u32 pciiim;
+ u32 pciiod;
+ u32 pciioic;
+ u32 pciioim;
+};
+
+/*
+ * PCI Control Register
+ */
+
+#define PCI_CTL_EN (1 << 0)
+#define PCI_CTL_TNR (1 << 1)
+#define PCI_CTL_SCE (1 << 2)
+#define PCI_CTL_IEN (1 << 3)
+#define PCI_CTL_AAA (1 << 4)
+#define PCI_CTL_EAP (1 << 5)
+#define PCI_CTL_PCIM_BIT 6
+#define PCI_CTL_PCIM 0x000001c0
+
+#define PCI_CTL_PCIM_DIS 0
+#define PCI_CTL_PCIM_TNR 1 /* Satellite - target not ready */
+#define PCI_CTL_PCIM_SUS 2 /* Satellite - suspended CPU. */
+#define PCI_CTL_PCIM_EXT 3 /* Host - external arbiter. */
+#define PCI_CTL PCIM_PRIO 4 /* Host - fixed priority arb. */
+#define PCI_CTL_PCIM_RR 5 /* Host - round robin priority. */
+#define PCI_CTL_PCIM_RSVD6 6
+#define PCI_CTL_PCIM_RSVD7 7
+
+#define PCI_CTL_IGM (1 << 9)
+
+/*
+ * PCI Status Register
+ */
+
+#define PCI_STAT_EED (1 << 0)
+#define PCI_STAT_WR (1 << 1)
+#define PCI_STAT_NMI (1 << 2)
+#define PCI_STAT_II (1 << 3)
+#define PCI_STAT_CWE (1 << 4)
+#define PCI_STAT_CRE (1 << 5)
+#define PCI_STAT_MDPE (1 << 6)
+#define PCI_STAT_STA (1 << 7)
+#define PCI_STAT_RTA (1 << 8)
+#define PCI_STAT_RMA (1 << 9)
+#define PCI_STAT_SSE (1 << 10)
+#define PCI_STAT_OSE (1 << 11)
+#define PCI_STAT_PE (1 << 12)
+#define PCI_STAT_TAE (1 << 13)
+#define PCI_STAT_RLE (1 << 14)
+#define PCI_STAT_BME (1 << 15)
+#define PCI_STAT_PRD (1 << 16)
+#define PCI_STAT_RIP (1 << 17)
+
+/*
+ * PCI Status Mask Register
+ */
+
+#define PCI_STATM_EED PCI_STAT_EED
+#define PCI_STATM_WR PCI_STAT_WR
+#define PCI_STATM_NMI PCI_STAT_NMI
+#define PCI_STATM_II PCI_STAT_II
+#define PCI_STATM_CWE PCI_STAT_CWE
+#define PCI_STATM_CRE PCI_STAT_CRE
+#define PCI_STATM_MDPE PCI_STAT_MDPE
+#define PCI_STATM_STA PCI_STAT_STA
+#define PCI_STATM_RTA PCI_STAT_RTA
+#define PCI_STATM_RMA PCI_STAT_RMA
+#define PCI_STATM_SSE PCI_STAT_SSE
+#define PCI_STATM_OSE PCI_STAT_OSE
+#define PCI_STATM_PE PCI_STAT_PE
+#define PCI_STATM_TAE PCI_STAT_TAE
+#define PCI_STATM_RLE PCI_STAT_RLE
+#define PCI_STATM_BME PCI_STAT_BME
+#define PCI_STATM_PRD PCI_STAT_PRD
+#define PCI_STATM_RIP PCI_STAT_RIP
+
+/*
+ * PCI Configuration Address Register
+ */
+#define PCI_CFGA_REG_BIT 2
+#define PCI_CFGA_REG 0x000000fc
+#define PCI_CFGA_REG_ID (0x00 >> 2) /* use PCFGID */
+#define PCI_CFGA_REG_04 (0x04 >> 2) /* use PCFG04_ */
+#define PCI_CFGA_REG_08 (0x08 >> 2) /* use PCFG08_ */
+#define PCI_CFGA_REG_0C (0x0C >> 2) /* use PCFG0C_ */
+#define PCI_CFGA_REG_PBA0 (0x10 >> 2) /* use PCIPBA_ */
+#define PCI_CFGA_REG_PBA1 (0x14 >> 2) /* use PCIPBA_ */
+#define PCI_CFGA_REG_PBA2 (0x18 >> 2) /* use PCIPBA_ */
+#define PCI_CFGA_REG_PBA3 (0x1c >> 2) /* use PCIPBA_ */
+#define PCI_CFGA_REG_SUBSYS (0x2c >> 2) /* use PCFGSS_ */
+#define PCI_CFGA_REG_3C (0x3C >> 2) /* use PCFG3C_ */
+#define PCI_CFGA_REG_PBBA0C (0x44 >> 2) /* use PCIPBAC_ */
+#define PCI_CFGA_REG_PBA0M (0x48 >> 2)
+#define PCI_CFGA_REG_PBA1C (0x4c >> 2) /* use PCIPBAC_ */
+#define PCI_CFGA_REG_PBA1M (0x50 >> 2)
+#define PCI_CFGA_REG_PBA2C (0x54 >> 2) /* use PCIPBAC_ */
+#define PCI_CFGA_REG_PBA2M (0x58 >> 2)
+#define PCI_CFGA_REG_PBA3C (0x5c >> 2) /* use PCIPBAC_ */
+#define PCI_CFGA_REG_PBA3M (0x60 >> 2)
+#define PCI_CFGA_REG_PMGT (0x64 >> 2)
+#define PCI_CFGA_FUNC_BIT 8
+#define PCI_CFGA_FUNC 0x00000700
+#define PCI_CFGA_DEV_BIT 11
+#define PCI_CFGA_DEV 0x0000f800
+#define PCI_CFGA_DEV_INTERN 0
+#define PCI_CFGA_BUS_BIT 16
+#define PCI CFGA_BUS 0x00ff0000
+#define PCI_CFGA_BUS_TYPE0 0
+#define PCI_CFGA_EN (1 << 31)
+
+/* PCI CFG04 commands */
+#define PCI_CFG04_CMD_IO_ENA (1 << 0)
+#define PCI_CFG04_CMD_MEM_ENA (1 << 1)
+#define PCI_CFG04_CMD_BM_ENA (1 << 2)
+#define PCI_CFG04_CMD_MW_INV (1 << 4)
+#define PCI_CFG04_CMD_PAR_ENA (1 << 6)
+#define PCI_CFG04_CMD_SER_ENA (1 << 8)
+#define PCI_CFG04_CMD_FAST_ENA (1 << 9)
+
+/* PCI CFG04 status fields */
+#define PCI_CFG04_STAT_BIT 16
+#define PCI_CFG04_STAT 0xffff0000
+#define PCI_CFG04_STAT_66_MHZ (1 << 21)
+#define PCI_CFG04_STAT_FBB (1 << 23)
+#define PCI_CFG04_STAT_MDPE (1 << 24)
+#define PCI_CFG04_STAT_DST (1 << 25)
+#define PCI_CFG04_STAT_STA (1 << 27)
+#define PCI_CFG04_STAT_RTA (1 << 28)
+#define PCI_CFG04_STAT_RMA (1 << 29)
+#define PCI_CFG04_STAT_SSE (1 << 30)
+#define PCI_CFG04_STAT_PE (1 << 31)
+
+#define PCI_PBA_MSI (1 << 0)
+#define PCI_PBA_P (1 << 2)
+
+/* PCI PBAC registers */
+#define PCI_PBAC_MSI (1 << 0)
+#define PCI_PBAC_P (1 << 1)
+#define PCI_PBAC_SIZE_BIT 2
+#define PCI_PBAC_SIZE 0x0000007c
+#define PCI_PBAC_SB (1 << 7)
+#define PCI_PBAC_PP (1 << 8)
+#define PCI_PBAC_MR_BIT 9
+#define PCI_PBAC_MR 0x00000600
+#define PCI_PBAC_MR_RD 0
+#define PCI_PBAC_MR_RD_LINE 1
+#define PCI_PBAC_MR_RD_MULT 2
+#define PCI_PBAC_MRL (1 << 11)
+#define PCI_PBAC_MRM (1 << 12)
+#define PCI_PBAC_TRP (1 << 13)
+
+#define PCI_CFG40_TRDY_TIM 0x000000ff
+#define PCI_CFG40_RET_LIM 0x0000ff00
+
+/*
+ * PCI Local Base Address [0|1|2|3] Register
+ */
+
+#define PCI_LBA_BADDR_BIT 0
+#define PCI_LBA_BADDR 0xffffff00
+
+/*
+ * PCI Local Base Address Control Register
+ */
+
+#define PCI_LBAC_MSI (1 << 0)
+#define PCI_LBAC_MSI_MEM 0
+#define PCI_LBAC_MSI_IO 1
+#define PCI_LBAC_SIZE_BIT 2
+#define PCI_LBAC_SIZE 0x0000007c
+#define PCI_LBAC_SB (1 << 7)
+#define PCI_LBAC_RT (1 << 8)
+#define PCI_LBAC_RT_NO_PREF 0
+#define PCI_LBAC_RT_PREF 1
+
+/*
+ * PCI Local Base Address [0|1|2|3] Mapping Register
+ */
+#define PCI_LBAM_MADDR_BIT 8
+#define PCI_LBAM_MADDR 0xffffff00
+
+/*
+ * PCI Decoupled Access Control Register
+ */
+#define PCI_DAC_DEN (1 << 0)
+
+/*
+ * PCI Decoupled Access Status Register
+ */
+#define PCI_DAS_D (1 << 0)
+#define PCI_DAS_B (1 << 1)
+#define PCI_DAS_E (1 << 2)
+#define PCI_DAS_OFE (1 << 3)
+#define PCI_DAS_OFF (1 << 4)
+#define PCI_DAS_IFE (1 << 5)
+#define PCI_DAS_IFF (1 << 6)
+
+/*
+ * PCI DMA Channel 8 Configuration Register
+ */
+#define PCI_DMA8C_MBS_BIT 0
+#define PCI_DMA8C_MBS 0x00000fff /* Maximum Burst Size. */
+#define PCI_DMA8C_OUR (1 << 12)
+
+/*
+ * PCI DMA Channel 9 Configuration Register
+ */
+#define PCI_DMA9C_MBS_BIT 0 /* Maximum Burst Size. */
+#define PCI_DMA9C_MBS 0x00000fff
+
+/*
+ * PCI to Memory(DMA Channel 8) AND Memory to PCI DMA(DMA Channel 9)Descriptors
+ */
+
+#define PCI_DMAD_PT_BIT 22 /* in DEVCMD field (descriptor) */
+#define PCI_DMAD_PT 0x00c00000 /* preferred transaction field */
+/* These are for reads (DMA channel 8) */
+#define PCI_DMAD_DEVCMD_MR 0 /* memory read */
+#define PCI_DMAD_DEVCMD_MRL 1 /* memory read line */
+#define PCI_DMAD_DEVCMD_MRM 2 /* memory read multiple */
+#define PCI_DMAD_DEVCMD_IOR 3 /* I/O read */
+/* These are for writes (DMA channel 9) */
+#define PCI_DMAD_DEVCMD_MW 0 /* memory write */
+#define PCI_DMAD_DEVCMD_MWI 1 /* memory write invalidate */
+#define PCI_DMAD_DEVCMD_IOW 3 /* I/O write */
+
+/* Swap byte field applies to both DMA channel 8 and 9 */
+#define PCI_DMAD_SB (1 << 24) /* swap byte field */
+
+
+/*
+ * PCI Target Control Register
+ */
+
+#define PCI_TC_RTIMER_BIT 0
+#define PCI_TC_RTIMER 0x000000ff
+#define PCI_TC_DTIMER_BIT 8
+#define PCI_TC_DTIMER 0x0000ff00
+#define PCI_TC_RDR (1 << 18)
+#define PCI_TC_DDT (1 << 19)
+
+/*
+ * PCI messaging unit [applies to both inbound and outbound registers ]
+ */
+#define PCI_MSU_M0 (1 << 0)
+#define PCI_MSU_M1 (1 << 1)
+#define PCI_MSU_DB (1 << 2)
+
+#define PCI_MSG_ADDR 0xB8088010
+#define PCI0_ADDR 0xB8080000
+#define rc32434_pci ((struct pci_reg *) PCI0_ADDR)
+#define rc32434_pci_msg ((struct pci_msu *) PCI_MSG_ADDR)
+
+#define PCIM_SHFT 0x6
+#define PCIM_BIT_LEN 0x7
+#define PCIM_H_EA 0x3
+#define PCIM_H_IA_FIX 0x4
+#define PCIM_H_IA_RR 0x5
+#if 0
+#define PCI_ADDR_START 0x13000000
+#endif
+
+#define PCI_ADDR_START 0x50000000
+
+#define CPUTOPCI_MEM_WIN 0x02000000
+#define CPUTOPCI_IO_WIN 0x00100000
+#define PCILBA_SIZE_SHFT 2
+#define PCILBA_SIZE_MASK 0x1F
+#define SIZE_256MB 0x1C
+#define SIZE_128MB 0x1B
+#define SIZE_64MB 0x1A
+#define SIZE_32MB 0x19
+#define SIZE_16MB 0x18
+#define SIZE_4MB 0x16
+#define SIZE_2MB 0x15
+#define SIZE_1MB 0x14
+#define KORINA_CONFIG0_ADDR 0x80000000
+#define KORINA_CONFIG1_ADDR 0x80000004
+#define KORINA_CONFIG2_ADDR 0x80000008
+#define KORINA_CONFIG3_ADDR 0x8000000C
+#define KORINA_CONFIG4_ADDR 0x80000010
+#define KORINA_CONFIG5_ADDR 0x80000014
+#define KORINA_CONFIG6_ADDR 0x80000018
+#define KORINA_CONFIG7_ADDR 0x8000001C
+#define KORINA_CONFIG8_ADDR 0x80000020
+#define KORINA_CONFIG9_ADDR 0x80000024
+#define KORINA_CONFIG10_ADDR 0x80000028
+#define KORINA_CONFIG11_ADDR 0x8000002C
+#define KORINA_CONFIG12_ADDR 0x80000030
+#define KORINA_CONFIG13_ADDR 0x80000034
+#define KORINA_CONFIG14_ADDR 0x80000038
+#define KORINA_CONFIG15_ADDR 0x8000003C
+#define KORINA_CONFIG16_ADDR 0x80000040
+#define KORINA_CONFIG17_ADDR 0x80000044
+#define KORINA_CONFIG18_ADDR 0x80000048
+#define KORINA_CONFIG19_ADDR 0x8000004C
+#define KORINA_CONFIG20_ADDR 0x80000050
+#define KORINA_CONFIG21_ADDR 0x80000054
+#define KORINA_CONFIG22_ADDR 0x80000058
+#define KORINA_CONFIG23_ADDR 0x8000005C
+#define KORINA_CONFIG24_ADDR 0x80000060
+#define KORINA_CONFIG25_ADDR 0x80000064
+#define KORINA_CMD (PCI_CFG04_CMD_IO_ENA | \
+ PCI_CFG04_CMD_MEM_ENA | \
+ PCI_CFG04_CMD_BM_ENA | \
+ PCI_CFG04_CMD_MW_INV | \
+ PCI_CFG04_CMD_PAR_ENA | \
+ PCI_CFG04_CMD_SER_ENA)
+
+#define KORINA_STAT (PCI_CFG04_STAT_MDPE | \
+ PCI_CFG04_STAT_STA | \
+ PCI_CFG04_STAT_RTA | \
+ PCI_CFG04_STAT_RMA | \
+ PCI_CFG04_STAT_SSE | \
+ PCI_CFG04_STAT_PE)
+
+#define KORINA_CNFG1 ((KORINA_STAT<<16)|KORINA_CMD)
+
+#define KORINA_REVID 0
+#define KORINA_CLASS_CODE 0
+#define KORINA_CNFG2 ((KORINA_CLASS_CODE<<8) | \
+ KORINA_REVID)
+
+#define KORINA_CACHE_LINE_SIZE 4
+#define KORINA_MASTER_LAT 0x3c
+#define KORINA_HEADER_TYPE 0
+#define KORINA_BIST 0
+
+#define KORINA_CNFG3 ((KORINA_BIST << 24) | \
+ (KORINA_HEADER_TYPE<<16) | \
+ (KORINA_MASTER_LAT<<8) | \
+ KORINA_CACHE_LINE_SIZE)
+
+#define KORINA_BAR0 0x00000008 /* 128 MB Memory */
+#define KORINA_BAR1 0x18800001 /* 1 MB IO */
+#define KORINA_BAR2 0x18000001 /* 2 MB IO window for Korina
+ internal Registers */
+#define KORINA_BAR3 0x48000008 /* Spare 128 MB Memory */
+
+#define KORINA_CNFG4 KORINA_BAR0
+#define KORINA_CNFG5 KORINA_BAR1
+#define KORINA_CNFG6 KORINA_BAR2
+#define KORINA_CNFG7 KORINA_BAR3
+
+#define KORINA_SUBSYS_VENDOR_ID 0x011d
+#define KORINA_SUBSYSTEM_ID 0x0214
+#define KORINA_CNFG8 0
+#define KORINA_CNFG9 0
+#define KORINA_CNFG10 0
+#define KORINA_CNFG11 ((KORINA_SUBSYS_VENDOR_ID<<16) | \
+ KORINA_SUBSYSTEM_ID)
+#define KORINA_INT_LINE 1
+#define KORINA_INT_PIN 1
+#define KORINA_MIN_GNT 8
+#define KORINA_MAX_LAT 0x38
+#define KORINA_CNFG12 0
+#define KORINA_CNFG13 0
+#define KORINA_CNFG14 0
+#define KORINA_CNFG15 ((KORINA_MAX_LAT<<24) | \
+ (KORINA_MIN_GNT<<16) | \
+ (KORINA_INT_PIN<<8) | \
+ KORINA_INT_LINE)
+#define KORINA_RETRY_LIMIT 0x80
+#define KORINA_TRDY_LIMIT 0x80
+#define KORINA_CNFG16 ((KORINA_RETRY_LIMIT<<8) | \
+ KORINA_TRDY_LIMIT)
+#define PCI_PBAxC_R 0x0
+#define PCI_PBAxC_RL 0x1
+#define PCI_PBAxC_RM 0x2
+#define SIZE_SHFT 2
+
+#if defined(__MIPSEB__)
+#define KORINA_PBA0C (PCI_PBAC_MRL | PCI_PBAC_SB | \
+ ((PCI_PBAxC_RM & 0x3) << PCI_PBAC_MR_BIT) | \
+ PCI_PBAC_PP | \
+ (SIZE_128MB<<SIZE_SHFT) | \
+ PCI_PBAC_P)
+#else
+#define KORINA_PBA0C (PCI_PBAC_MRL | \
+ ((PCI_PBAxC_RM & 0x3) << PCI_PBAC_MR_BIT) | \
+ PCI_PBAC_PP | \
+ (SIZE_128MB<<SIZE_SHFT) | \
+ PCI_PBAC_P)
+#endif
+#define KORINA_CNFG17 KORINA_PBA0C
+#define KORINA_PBA0M 0x0
+#define KORINA_CNFG18 KORINA_PBA0M
+
+#if defined(__MIPSEB__)
+#define KORINA_PBA1C ((SIZE_1MB<<SIZE_SHFT) | PCI_PBAC_SB | \
+ PCI_PBAC_MSI)
+#else
+#define KORINA_PBA1C ((SIZE_1MB<<SIZE_SHFT) | \
+ PCI_PBAC_MSI)
+#endif
+#define KORINA_CNFG19 KORINA_PBA1C
+#define KORINA_PBA1M 0x0
+#define KORINA_CNFG20 KORINA_PBA1M
+
+#if defined(__MIPSEB__)
+#define KORINA_PBA2C ((SIZE_2MB<<SIZE_SHFT) | PCI_PBAC_SB | \
+ PCI_PBAC_MSI)
+#else
+#define KORINA_PBA2C ((SIZE_2MB<<SIZE_SHFT) | \
+ PCI_PBAC_MSI)
+#endif
+#define KORINA_CNFG21 KORINA_PBA2C
+#define KORINA_PBA2M 0x18000000
+#define KORINA_CNFG22 KORINA_PBA2M
+#define KORINA_PBA3C 0
+#define KORINA_CNFG23 KORINA_PBA3C
+#define KORINA_PBA3M 0
+#define KORINA_CNFG24 KORINA_PBA3M
+
+#define PCITC_DTIMER_VAL 8
+#define PCITC_RTIMER_VAL 0x10
+
+#endif /* __ASM_RC32434_PCI_H */
diff --git a/arch/mips/include/asm/mach-rc32434/prom.h b/arch/mips/include/asm/mach-rc32434/prom.h
new file mode 100644
index 00000000000..660707f1bcc
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/prom.h
@@ -0,0 +1,40 @@
+/*
+ * Definitions for the PROM
+ *
+ * Copyright 2002 Ryan Holm <ryan.holmQVist@idt.com>
+ * Copyright 2008 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#define PROM_ENTRY(x) (0xbfc00000 + ((x) * 8))
+
+#define SR_NMI 0x00180000
+#define SERIAL_SPEED_ENTRY 0x00000001
+
+#define FREQ_TAG "HZ="
+#define KMAC_TAG "kmac="
+#define MEM_TAG "mem="
+#define BOARD_TAG "board="
+
+#define BOARD_RB532 "500"
+#define BOARD_RB532A "500r5"
diff --git a/arch/mips/include/asm/mach-rc32434/rb.h b/arch/mips/include/asm/mach-rc32434/rb.h
new file mode 100644
index 00000000000..79e8ef67d0d
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/rb.h
@@ -0,0 +1,84 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2004 IDT Inc.
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+#ifndef __ASM_RC32434_RB_H
+#define __ASM_RC32434_RB_H
+
+#include <linux/genhd.h>
+
+#define REGBASE 0x18000000
+#define IDT434_REG_BASE ((volatile void *) KSEG1ADDR(REGBASE))
+#define UART0BASE 0x58000
+#define RST (1 << 15)
+#define DEV0BASE 0x010000
+#define DEV0MASK 0x010004
+#define DEV0C 0x010008
+#define DEV0T 0x01000C
+#define DEV1BASE 0x010010
+#define DEV1MASK 0x010014
+#define DEV1C 0x010018
+#define DEV1TC 0x01001C
+#define DEV2BASE 0x010020
+#define DEV2MASK 0x010024
+#define DEV2C 0x010028
+#define DEV2TC 0x01002C
+#define DEV3BASE 0x010030
+#define DEV3MASK 0x010034
+#define DEV3C 0x010038
+#define DEV3TC 0x01003C
+#define BTCS 0x010040
+#define BTCOMPARE 0x010044
+#define GPIOBASE 0x050000
+#define GPIOCFG 0x050004
+#define GPIOD 0x050008
+#define GPIOILEVEL 0x05000C
+#define GPIOISTAT 0x050010
+#define GPIONMIEN 0x050014
+#define IMASK6 0x038038
+#define LO_WPX (1 << 0)
+#define LO_ALE (1 << 1)
+#define LO_CLE (1 << 2)
+#define LO_CEX (1 << 3)
+#define LO_FOFF (1 << 5)
+#define LO_SPICS (1 << 6)
+#define LO_ULED (1 << 7)
+
+#define BIT_TO_MASK(x) (1 << x)
+
+struct dev_reg {
+ u32 base;
+ u32 mask;
+ u32 ctl;
+ u32 timing;
+};
+
+struct korina_device {
+ char *name;
+ unsigned char mac[6];
+ struct net_device *dev;
+};
+
+struct cf_device {
+ int gpio_pin;
+ void *dev;
+ struct gendisk *gd;
+};
+
+struct mpmc_device {
+ unsigned char state;
+ spinlock_t lock;
+ void __iomem *base;
+};
+
+#endif /* __ASM_RC32434_RB_H */
diff --git a/arch/mips/include/asm/mach-rc32434/rc32434.h b/arch/mips/include/asm/mach-rc32434/rc32434.h
new file mode 100644
index 00000000000..fce25d4231f
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/rc32434.h
@@ -0,0 +1,19 @@
+/*
+ * Definitions for IDT RC323434 CPU.
+ */
+
+#ifndef _ASM_RC32434_RC32434_H_
+#define _ASM_RC32434_RC32434_H_
+
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#define IDT_CLOCK_MULT 2
+
+/* cpu pipeline flush */
+static inline void rc32434_sync(void)
+{
+ __asm__ volatile ("sync");
+}
+
+#endif /* _ASM_RC32434_RC32434_H_ */
diff --git a/arch/mips/include/asm/mach-rc32434/timer.h b/arch/mips/include/asm/mach-rc32434/timer.h
new file mode 100644
index 00000000000..e49b1d57a01
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/timer.h
@@ -0,0 +1,65 @@
+/*
+ * Definitions for timer registers
+ *
+ * Copyright 2004 Philip Rischel <rischelp@idt.com>
+ * Copyright 2008 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __ASM_RC32434_TIMER_H
+#define __ASM_RC32434_TIMER_H
+
+#include <asm/mach-rc32434/rb.h>
+
+#define TIMER0_BASE_ADDR 0x18028000
+#define TIMER_COUNT 3
+
+struct timer_counter {
+ u32 count;
+ u32 compare;
+ u32 ctc; /*use CTC_ */
+};
+
+struct timer {
+ struct timer_counter tim[TIMER_COUNT];
+ u32 rcount; /* use RCOUNT_ */
+ u32 rcompare; /* use RCOMPARE_ */
+ u32 rtc; /* use RTC_ */
+};
+
+#define RC32434_CTC_EN_BIT 0
+#define RC32434_CTC_TO_BIT 1
+
+/* Real time clock registers */
+#define RC32434_RTC_MSK(x) BIT_TO_MASK(x)
+#define RC32434_RTC_CE_BIT 0
+#define RC32434_RTC_TO_BIT 1
+#define RC32434_RTC_RQE_BIT 2
+
+/* Counter registers */
+#define RC32434_RCOUNT_BIT 0
+#define RC32434_RCOUNT_MSK 0x0000ffff
+#define RC32434_RCOMP_BIT 0
+#define RC32434_RCOMP_MSK 0x0000ffff
+
+#endif /* __ASM_RC32434_TIMER_H */
diff --git a/arch/mips/include/asm/mach-rc32434/war.h b/arch/mips/include/asm/mach-rc32434/war.h
new file mode 100644
index 00000000000..3ddf187e98a
--- /dev/null
+++ b/arch/mips/include/asm/mach-rc32434/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_MIPS_WAR_H
+#define __ASM_MIPS_MACH_MIPS_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 1
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */
diff --git a/arch/mips/include/asm/mach-rm/cpu-feature-overrides.h b/arch/mips/include/asm/mach-rm/cpu-feature-overrides.h
new file mode 100644
index 00000000000..ccf54336353
--- /dev/null
+++ b/arch/mips/include/asm/mach-rm/cpu-feature-overrides.h
@@ -0,0 +1,43 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 04, 07 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * SNI RM200 C apparently was only shipped with R4600 V2.0 and R5000 processors.
+ */
+#ifndef __ASM_MACH_RM200_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_RM200_CPU_FEATURE_OVERRIDES_H
+
+#include <cpu-feature-overrides.h>
+
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_4k_cache 1
+#define cpu_has_fpu 1
+#define cpu_has_32fpr 1
+#define cpu_has_counter 1
+#define cpu_has_watch 0
+#define cpu_has_mips16 0
+#define cpu_has_divec 0
+#define cpu_has_cache_cdex_p 1
+#define cpu_has_prefetch 0
+#define cpu_has_mcheck 0
+#define cpu_has_ejtag 0
+#define cpu_has_llsc 1
+#define cpu_has_vtag_icache 0
+#define cpu_has_dc_aliases (PAGE_SIZE < 0x4000)
+#define cpu_has_ic_fills_f_dc 0
+#define cpu_has_dsp 0
+#define cpu_has_nofpuex 0
+#define cpu_has_64bits 1
+#define cpu_has_mipsmt 0
+#define cpu_has_userlocal 0
+
+#define cpu_has_mips32r1 0
+#define cpu_has_mips32r2 0
+#define cpu_has_mips64r1 0
+#define cpu_has_mips64r2 0
+
+#endif /* __ASM_MACH_RM200_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-rm/mc146818rtc.h b/arch/mips/include/asm/mach-rm/mc146818rtc.h
new file mode 100644
index 00000000000..145bce096fe
--- /dev/null
+++ b/arch/mips/include/asm/mach-rm/mc146818rtc.h
@@ -0,0 +1,21 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004 by Ralf Baechle
+ *
+ * RTC routines for PC style attached Dallas chip with ARC epoch.
+ */
+#ifndef __ASM_MACH_RM_MC146818RTC_H
+#define __ASM_MACH_RM_MC146818RTC_H
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1900)
+#else
+#define mc146818_decode_year(year) ((year) + 1980)
+#endif
+
+#include_next <mc146818rtc.h>
+
+#endif /* __ASM_MACH_RM_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mach-rm/war.h b/arch/mips/include/asm/mach-rm/war.h
new file mode 100644
index 00000000000..948d3129a11
--- /dev/null
+++ b/arch/mips/include/asm/mach-rm/war.h
@@ -0,0 +1,29 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_RM_WAR_H
+#define __ASM_MIPS_MACH_RM_WAR_H
+
+/*
+ * The RM200C seems to have been shipped only with V2.0 R4600s
+ */
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 1
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_RM_WAR_H */
diff --git a/arch/mips/include/asm/mach-sibyte/cpu-feature-overrides.h b/arch/mips/include/asm/mach-sibyte/cpu-feature-overrides.h
new file mode 100644
index 00000000000..1c1f92415b9
--- /dev/null
+++ b/arch/mips/include/asm/mach-sibyte/cpu-feature-overrides.h
@@ -0,0 +1,47 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 04, 07 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_MACH_SIBYTE_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_SIBYTE_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * Sibyte are MIPS64 processors wired to a specific configuration
+ */
+#define cpu_has_watch 1
+#define cpu_has_mips16 0
+#define cpu_has_divec 1
+#define cpu_has_vce 0
+#define cpu_has_cache_cdex_p 0
+#define cpu_has_cache_cdex_s 0
+#define cpu_has_prefetch 1
+#define cpu_has_mcheck 1
+#define cpu_has_ejtag 1
+
+#define cpu_has_llsc 1
+#define cpu_has_vtag_icache 1
+#define cpu_has_dc_aliases 0
+#define cpu_has_ic_fills_f_dc 0
+#define cpu_has_dsp 0
+#define cpu_has_mipsmt 0
+#define cpu_has_userlocal 0
+#define cpu_icache_snoops_remote_store 0
+
+#define cpu_has_nofpuex 0
+#define cpu_has_64bits 1
+
+#define cpu_has_mips32r1 1
+#define cpu_has_mips32r2 0
+#define cpu_has_mips64r1 1
+#define cpu_has_mips64r2 0
+
+#define cpu_has_inclusive_pcaches 0
+
+#define cpu_dcache_line_size() 32
+#define cpu_icache_line_size() 32
+#define cpu_scache_line_size() 32
+
+#endif /* __ASM_MACH_SIBYTE_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-sibyte/war.h b/arch/mips/include/asm/mach-sibyte/war.h
new file mode 100644
index 00000000000..7950ef4f032
--- /dev/null
+++ b/arch/mips/include/asm/mach-sibyte/war.h
@@ -0,0 +1,37 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_SIBYTE_WAR_H
+#define __ASM_MIPS_MACH_SIBYTE_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+
+#if defined(CONFIG_SB1_PASS_1_WORKAROUNDS) || \
+ defined(CONFIG_SB1_PASS_2_WORKAROUNDS)
+
+#define BCM1250_M3_WAR 1
+#define SIBYTE_1956_WAR 1
+
+#else
+
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+
+#endif
+
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_SIBYTE_WAR_H */
diff --git a/arch/mips/include/asm/mach-tx39xx/ioremap.h b/arch/mips/include/asm/mach-tx39xx/ioremap.h
new file mode 100644
index 00000000000..93c6c04ffda
--- /dev/null
+++ b/arch/mips/include/asm/mach-tx39xx/ioremap.h
@@ -0,0 +1,38 @@
+/*
+ * include/asm-mips/mach-tx39xx/ioremap.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MACH_TX39XX_IOREMAP_H
+#define __ASM_MACH_TX39XX_IOREMAP_H
+
+#include <linux/types.h>
+
+/*
+ * Allow physical addresses to be fixed up to help peripherals located
+ * outside the low 32-bit range -- generic pass-through version.
+ */
+static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+{
+ return phys_addr;
+}
+
+static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size,
+ unsigned long flags)
+{
+#define TXX9_DIRECTMAP_BASE 0xff000000ul
+ if (offset >= TXX9_DIRECTMAP_BASE &&
+ offset < TXX9_DIRECTMAP_BASE + 0xff0000)
+ return (void __iomem *)offset;
+ return NULL;
+}
+
+static inline int plat_iounmap(const volatile void __iomem *addr)
+{
+ return (unsigned long)addr >= TXX9_DIRECTMAP_BASE;
+}
+
+#endif /* __ASM_MACH_TX39XX_IOREMAP_H */
diff --git a/arch/mips/include/asm/mach-tx39xx/mangle-port.h b/arch/mips/include/asm/mach-tx39xx/mangle-port.h
new file mode 100644
index 00000000000..ef0b502fd8b
--- /dev/null
+++ b/arch/mips/include/asm/mach-tx39xx/mangle-port.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_MACH_TX39XX_MANGLE_PORT_H
+#define __ASM_MACH_TX39XX_MANGLE_PORT_H
+
+#if defined(CONFIG_TOSHIBA_JMR3927)
+extern unsigned long (*__swizzle_addr_b)(unsigned long port);
+#define NEEDS_TXX9_SWIZZLE_ADDR_B
+#else
+#define __swizzle_addr_b(port) (port)
+#endif
+#define __swizzle_addr_w(port) (port)
+#define __swizzle_addr_l(port) (port)
+#define __swizzle_addr_q(port) (port)
+
+#define ioswabb(a, x) (x)
+#define __mem_ioswabb(a, x) (x)
+#define ioswabw(a, x) le16_to_cpu(x)
+#define __mem_ioswabw(a, x) (x)
+#define ioswabl(a, x) le32_to_cpu(x)
+#define __mem_ioswabl(a, x) (x)
+#define ioswabq(a, x) le64_to_cpu(x)
+#define __mem_ioswabq(a, x) (x)
+
+#endif /* __ASM_MACH_TX39XX_MANGLE_PORT_H */
diff --git a/arch/mips/include/asm/mach-tx39xx/war.h b/arch/mips/include/asm/mach-tx39xx/war.h
new file mode 100644
index 00000000000..43381461635
--- /dev/null
+++ b/arch/mips/include/asm/mach-tx39xx/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_TX39XX_WAR_H
+#define __ASM_MIPS_MACH_TX39XX_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_TX39XX_WAR_H */
diff --git a/arch/mips/include/asm/mach-tx49xx/cpu-feature-overrides.h b/arch/mips/include/asm/mach-tx49xx/cpu-feature-overrides.h
new file mode 100644
index 00000000000..275eaf92c74
--- /dev/null
+++ b/arch/mips/include/asm/mach-tx49xx/cpu-feature-overrides.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_MACH_TX49XX_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_TX49XX_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_has_llsc 1
+#define cpu_has_64bits 1
+#define cpu_has_inclusive_pcaches 0
+
+#define cpu_has_mips16 0
+#define cpu_has_mdmx 0
+#define cpu_has_mips3d 0
+#define cpu_has_smartmips 0
+#define cpu_has_vtag_icache 0
+#define cpu_has_ic_fills_f_dc 0
+#define cpu_has_dsp 0
+#define cpu_has_mipsmt 0
+#define cpu_has_userlocal 0
+
+#define cpu_has_mips32r1 0
+#define cpu_has_mips32r2 0
+#define cpu_has_mips64r1 0
+#define cpu_has_mips64r2 0
+
+#endif /* __ASM_MACH_TX49XX_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-tx49xx/ioremap.h b/arch/mips/include/asm/mach-tx49xx/ioremap.h
new file mode 100644
index 00000000000..1e7beae7222
--- /dev/null
+++ b/arch/mips/include/asm/mach-tx49xx/ioremap.h
@@ -0,0 +1,43 @@
+/*
+ * include/asm-mips/mach-tx49xx/ioremap.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_MACH_TX49XX_IOREMAP_H
+#define __ASM_MACH_TX49XX_IOREMAP_H
+
+#include <linux/types.h>
+
+/*
+ * Allow physical addresses to be fixed up to help peripherals located
+ * outside the low 32-bit range -- generic pass-through version.
+ */
+static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+{
+ return phys_addr;
+}
+
+static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size,
+ unsigned long flags)
+{
+#ifdef CONFIG_64BIT
+#define TXX9_DIRECTMAP_BASE 0xfff000000ul
+#else
+#define TXX9_DIRECTMAP_BASE 0xff000000ul
+#endif
+ if (offset >= TXX9_DIRECTMAP_BASE &&
+ offset < TXX9_DIRECTMAP_BASE + 0x400000)
+ return (void __iomem *)(unsigned long)(int)offset;
+ return NULL;
+}
+
+static inline int plat_iounmap(const volatile void __iomem *addr)
+{
+ return (unsigned long)addr >=
+ (unsigned long)(int)(TXX9_DIRECTMAP_BASE & 0xffffffff);
+}
+
+#endif /* __ASM_MACH_TX49XX_IOREMAP_H */
diff --git a/arch/mips/include/asm/mach-tx49xx/kmalloc.h b/arch/mips/include/asm/mach-tx49xx/kmalloc.h
new file mode 100644
index 00000000000..913ff196259
--- /dev/null
+++ b/arch/mips/include/asm/mach-tx49xx/kmalloc.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_MACH_TX49XX_KMALLOC_H
+#define __ASM_MACH_TX49XX_KMALLOC_H
+
+/*
+ * All happy, no need to define ARCH_KMALLOC_MINALIGN
+ */
+
+#endif /* __ASM_MACH_TX49XX_KMALLOC_H */
diff --git a/arch/mips/include/asm/mach-tx49xx/war.h b/arch/mips/include/asm/mach-tx49xx/war.h
new file mode 100644
index 00000000000..39b5d1177c5
--- /dev/null
+++ b/arch/mips/include/asm/mach-tx49xx/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_TX49XX_WAR_H
+#define __ASM_MIPS_MACH_TX49XX_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 1
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_TX49XX_WAR_H */
diff --git a/arch/mips/include/asm/mach-vr41xx/irq.h b/arch/mips/include/asm/mach-vr41xx/irq.h
new file mode 100644
index 00000000000..862058d3f81
--- /dev/null
+++ b/arch/mips/include/asm/mach-vr41xx/irq.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_MACH_VR41XX_IRQ_H
+#define __ASM_MACH_VR41XX_IRQ_H
+
+#include <asm/vr41xx/irq.h> /* for MIPS_CPU_IRQ_BASE */
+
+#include_next <irq.h>
+
+#endif /* __ASM_MACH_VR41XX_IRQ_H */
diff --git a/arch/mips/include/asm/mach-vr41xx/war.h b/arch/mips/include/asm/mach-vr41xx/war.h
new file mode 100644
index 00000000000..56a38926412
--- /dev/null
+++ b/arch/mips/include/asm/mach-vr41xx/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_VR41XX_WAR_H
+#define __ASM_MIPS_MACH_VR41XX_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_VR41XX_WAR_H */
diff --git a/arch/mips/include/asm/mach-wrppmc/mach-gt64120.h b/arch/mips/include/asm/mach-wrppmc/mach-gt64120.h
new file mode 100644
index 00000000000..83746b84a5e
--- /dev/null
+++ b/arch/mips/include/asm/mach-wrppmc/mach-gt64120.h
@@ -0,0 +1,83 @@
+/*
+ * This is a direct copy of the ev96100.h file, with a global
+ * search and replace. The numbers are the same.
+ *
+ * The reason I'm duplicating this is so that the 64120/96100
+ * defines won't be confusing in the source code.
+ */
+#ifndef __ASM_MIPS_GT64120_H
+#define __ASM_MIPS_GT64120_H
+
+/*
+ * This is the CPU physical memory map of PPMC Board:
+ *
+ * 0x00000000-0x03FFFFFF - 64MB SDRAM (SCS[0]#)
+ * 0x1C000000-0x1C000000 - LED (CS0)
+ * 0x1C800000-0x1C800007 - UART 16550 port (CS1)
+ * 0x1F000000-0x1F000000 - MailBox (CS3)
+ * 0x1FC00000-0x20000000 - 4MB Flash (BOOT CS)
+ */
+
+#define WRPPMC_SDRAM_SCS0_BASE 0x00000000
+#define WRPPMC_SDRAM_SCS0_SIZE 0x04000000
+
+#define WRPPMC_UART16550_BASE 0x1C800000
+#define WRPPMC_UART16550_CLOCK 3686400 /* 3.68MHZ */
+
+#define WRPPMC_LED_BASE 0x1C000000
+#define WRPPMC_MBOX_BASE 0x1F000000
+
+#define WRPPMC_BOOTROM_BASE 0x1FC00000
+#define WRPPMC_BOOTROM_SIZE 0x00400000 /* 4M Flash */
+
+#define WRPPMC_MIPS_TIMER_IRQ 7 /* MIPS compare/count timer interrupt */
+#define WRPPMC_UART16550_IRQ 6
+#define WRPPMC_PCI_INTA_IRQ 3
+
+/*
+ * PCI Bus I/O and Memory resources allocation
+ *
+ * NOTE: We only have PCI_0 hose interface
+ */
+#define GT_PCI_MEM_BASE 0x13000000UL
+#define GT_PCI_MEM_SIZE 0x02000000UL
+#define GT_PCI_IO_BASE 0x11000000UL
+#define GT_PCI_IO_SIZE 0x02000000UL
+
+/*
+ * PCI interrupts will come in on either the INTA or INTD interrupt lines,
+ * which are mapped to the #2 and #5 interrupt pins of the MIPS. On our
+ * boards, they all either come in on IntD or they all come in on IntA, they
+ * aren't mixed. There can be numerous PCI interrupts, so we keep a list of the
+ * "requested" interrupt numbers and go through the list whenever we get an
+ * IntA/D.
+ *
+ * Interrupts < 8 are directly wired to the processor; PCI INTA is 8 and
+ * INTD is 11.
+ */
+#define GT_TIMER 4
+#define GT_INTA 2
+#define GT_INTD 5
+
+#ifndef __ASSEMBLY__
+
+/*
+ * GT64120 internal register space base address
+ */
+extern unsigned long gt64120_base;
+
+#define GT64120_BASE (gt64120_base)
+
+/* define WRPPMC_EARLY_DEBUG to enable early output something to UART */
+#undef WRPPMC_EARLY_DEBUG
+
+#ifdef WRPPMC_EARLY_DEBUG
+extern void wrppmc_led_on(int mask);
+extern void wrppmc_led_off(int mask);
+extern void wrppmc_early_printk(const char *fmt, ...);
+#else
+#define wrppmc_early_printk(fmt, ...) do {} while (0)
+#endif /* WRPPMC_EARLY_DEBUG */
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_MIPS_GT64120_H */
diff --git a/arch/mips/include/asm/mach-wrppmc/war.h b/arch/mips/include/asm/mach-wrppmc/war.h
new file mode 100644
index 00000000000..ac48629bb1c
--- /dev/null
+++ b/arch/mips/include/asm/mach-wrppmc/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_WRPPMC_WAR_H
+#define __ASM_MIPS_MACH_WRPPMC_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 1
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_WRPPMC_WAR_H */
diff --git a/arch/mips/include/asm/mach-yosemite/cpu-feature-overrides.h b/arch/mips/include/asm/mach-yosemite/cpu-feature-overrides.h
new file mode 100644
index 00000000000..470e5e9e10d
--- /dev/null
+++ b/arch/mips/include/asm/mach-yosemite/cpu-feature-overrides.h
@@ -0,0 +1,47 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 04, 07 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_MACH_YOSEMITE_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_YOSEMITE_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * Momentum Jaguar ATX always has the RM9000 processor.
+ */
+#define cpu_has_watch 1
+#define cpu_has_mips16 0
+#define cpu_has_divec 0
+#define cpu_has_vce 0
+#define cpu_has_cache_cdex_p 0
+#define cpu_has_cache_cdex_s 0
+#define cpu_has_prefetch 1
+#define cpu_has_mcheck 0
+#define cpu_has_ejtag 0
+
+#define cpu_has_llsc 1
+#define cpu_has_vtag_icache 0
+#define cpu_has_dc_aliases 0
+#define cpu_has_ic_fills_f_dc 0
+#define cpu_has_dsp 0
+#define cpu_has_mipsmt 0
+#define cpu_has_userlocal 0
+#define cpu_icache_snoops_remote_store 0
+
+#define cpu_has_nofpuex 0
+#define cpu_has_64bits 1
+
+#define cpu_has_inclusive_pcaches 0
+
+#define cpu_dcache_line_size() 32
+#define cpu_icache_line_size() 32
+#define cpu_scache_line_size() 32
+
+#define cpu_has_mips32r1 0
+#define cpu_has_mips32r2 0
+#define cpu_has_mips64r1 0
+#define cpu_has_mips64r2 0
+
+#endif /* __ASM_MACH_YOSEMITE_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-yosemite/war.h b/arch/mips/include/asm/mach-yosemite/war.h
new file mode 100644
index 00000000000..e5c6d53efc8
--- /dev/null
+++ b/arch/mips/include/asm/mach-yosemite/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_YOSEMITE_WAR_H
+#define __ASM_MIPS_MACH_YOSEMITE_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 1
+#define ICACHE_REFILLS_WORKAROUND_WAR 1
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_YOSEMITE_WAR_H */
diff --git a/arch/mips/include/asm/mc146818-time.h b/arch/mips/include/asm/mc146818-time.h
new file mode 100644
index 00000000000..199b45733a9
--- /dev/null
+++ b/arch/mips/include/asm/mc146818-time.h
@@ -0,0 +1,119 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef __ASM_MC146818_TIME_H
+#define __ASM_MC146818_TIME_H
+
+#include <linux/bcd.h>
+#include <linux/mc146818rtc.h>
+#include <linux/time.h>
+
+/*
+ * For check timing call set_rtc_mmss() 500ms; used in timer interrupt.
+ */
+#define USEC_AFTER 500000
+#define USEC_BEFORE 500000
+
+/*
+ * In order to set the CMOS clock precisely, set_rtc_mmss has to be
+ * called 500 ms after the second nowtime has started, because when
+ * nowtime is written into the registers of the CMOS clock, it will
+ * jump to the next second precisely 500 ms later. Check the Motorola
+ * MC146818A or Dallas DS12887 data sheet for details.
+ *
+ * BUG: This routine does not handle hour overflow properly; it just
+ * sets the minutes. Usually you'll only notice that after reboot!
+ */
+static inline int mc146818_set_rtc_mmss(unsigned long nowtime)
+{
+ int real_seconds, real_minutes, cmos_minutes;
+ unsigned char save_control, save_freq_select;
+ int retval = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&rtc_lock, flags);
+ save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */
+ CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
+
+ save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */
+ CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
+
+ cmos_minutes = CMOS_READ(RTC_MINUTES);
+ if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+ cmos_minutes = bcd2bin(cmos_minutes);
+
+ /*
+ * since we're only adjusting minutes and seconds,
+ * don't interfere with hour overflow. This avoids
+ * messing with unknown time zones but requires your
+ * RTC not to be off by more than 15 minutes
+ */
+ real_seconds = nowtime % 60;
+ real_minutes = nowtime / 60;
+ if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
+ real_minutes += 30; /* correct for half hour time zone */
+ real_minutes %= 60;
+
+ if (abs(real_minutes - cmos_minutes) < 30) {
+ if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+ real_seconds = bin2bcd(real_seconds);
+ real_minutes = bin2bcd(real_minutes);
+ }
+ CMOS_WRITE(real_seconds, RTC_SECONDS);
+ CMOS_WRITE(real_minutes, RTC_MINUTES);
+ } else {
+ printk(KERN_WARNING
+ "set_rtc_mmss: can't update from %d to %d\n",
+ cmos_minutes, real_minutes);
+ retval = -1;
+ }
+
+ /* The following flags have to be released exactly in this order,
+ * otherwise the DS12887 (popular MC146818A clone with integrated
+ * battery and quartz) will not reset the oscillator and will not
+ * update precisely 500 ms later. You won't find this mentioned in
+ * the Dallas Semiconductor data sheets, but who believes data
+ * sheets anyway ... -- Markus Kuhn
+ */
+ CMOS_WRITE(save_control, RTC_CONTROL);
+ CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
+ spin_unlock_irqrestore(&rtc_lock, flags);
+
+ return retval;
+}
+
+static inline unsigned long mc146818_get_cmos_time(void)
+{
+ unsigned int year, mon, day, hour, min, sec;
+ unsigned long flags;
+
+ spin_lock_irqsave(&rtc_lock, flags);
+
+ do {
+ sec = CMOS_READ(RTC_SECONDS);
+ min = CMOS_READ(RTC_MINUTES);
+ hour = CMOS_READ(RTC_HOURS);
+ day = CMOS_READ(RTC_DAY_OF_MONTH);
+ mon = CMOS_READ(RTC_MONTH);
+ year = CMOS_READ(RTC_YEAR);
+ } while (sec != CMOS_READ(RTC_SECONDS));
+
+ if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+ sec = bcd2bin(sec);
+ min = bcd2bin(min);
+ hour = bcd2bin(hour);
+ day = bcd2bin(day);
+ mon = bcd2bin(mon);
+ year = bcd2bin(year);
+ }
+ spin_unlock_irqrestore(&rtc_lock, flags);
+ year = mc146818_decode_year(year);
+
+ return mktime(year, mon, day, hour, min, sec);
+}
+
+#endif /* __ASM_MC146818_TIME_H */
diff --git a/arch/mips/include/asm/mc146818rtc.h b/arch/mips/include/asm/mc146818rtc.h
new file mode 100644
index 00000000000..68b4da6d520
--- /dev/null
+++ b/arch/mips/include/asm/mc146818rtc.h
@@ -0,0 +1,16 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Machine dependent access functions for RTC registers.
+ *
+ * Copyright (C) 1996, 1997, 1998, 2000 Ralf Baechle
+ * Copyright (C) 2002 Maciej W. Rozycki
+ */
+#ifndef _ASM_MC146818RTC_H
+#define _ASM_MC146818RTC_H
+
+#include <mc146818rtc.h>
+
+#endif /* _ASM_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mips-boards/bonito64.h b/arch/mips/include/asm/mips-boards/bonito64.h
new file mode 100644
index 00000000000..a0f04bb99c9
--- /dev/null
+++ b/arch/mips/include/asm/mips-boards/bonito64.h
@@ -0,0 +1,436 @@
+/*
+ * Bonito Register Map
+ *
+ * This file is the original bonito.h from Algorithmics with minor changes
+ * to fit into linux.
+ *
+ * Copyright (c) 1999 Algorithmics Ltd
+ *
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2001 MIPS Technologies, Inc. All rights reserved.
+ *
+ * Algorithmics gives permission for anyone to use and modify this file
+ * without any obligation or license condition except that you retain
+ * this copyright message in any source redistribution in whole or part.
+ *
+ */
+
+/* Revision 1.48 autogenerated on 08/17/99 15:20:01 */
+/* This bonito64 version editted from bonito.h Revision 1.48 on 11/09/00 */
+
+#ifndef _ASM_MIPS_BOARDS_BONITO64_H
+#define _ASM_MIPS_BOARDS_BONITO64_H
+
+#ifdef __ASSEMBLY__
+
+/* offsets from base register */
+#define BONITO(x) (x)
+
+#elif defined(CONFIG_LEMOTE_FULONG)
+
+#define BONITO(x) (*(volatile u32 *)((char *)CKSEG1ADDR(BONITO_REG_BASE) + (x)))
+#define BONITO_IRQ_BASE 32
+
+#else
+
+/*
+ * Algorithmics Bonito64 system controller register base.
+ */
+extern unsigned long _pcictrl_bonito;
+extern unsigned long _pcictrl_bonito_pcicfg;
+
+#define BONITO(x) *(volatile u32 *)(_pcictrl_bonito + (x))
+
+#endif /* __ASSEMBLY__ */
+
+
+#define BONITO_BOOT_BASE 0x1fc00000
+#define BONITO_BOOT_SIZE 0x00100000
+#define BONITO_BOOT_TOP (BONITO_BOOT_BASE+BONITO_BOOT_SIZE-1)
+#define BONITO_FLASH_BASE 0x1c000000
+#define BONITO_FLASH_SIZE 0x03000000
+#define BONITO_FLASH_TOP (BONITO_FLASH_BASE+BONITO_FLASH_SIZE-1)
+#define BONITO_SOCKET_BASE 0x1f800000
+#define BONITO_SOCKET_SIZE 0x00400000
+#define BONITO_SOCKET_TOP (BONITO_SOCKET_BASE+BONITO_SOCKET_SIZE-1)
+#define BONITO_REG_BASE 0x1fe00000
+#define BONITO_REG_SIZE 0x00040000
+#define BONITO_REG_TOP (BONITO_REG_BASE+BONITO_REG_SIZE-1)
+#define BONITO_DEV_BASE 0x1ff00000
+#define BONITO_DEV_SIZE 0x00100000
+#define BONITO_DEV_TOP (BONITO_DEV_BASE+BONITO_DEV_SIZE-1)
+#define BONITO_PCILO_BASE 0x10000000
+#define BONITO_PCILO_SIZE 0x0c000000
+#define BONITO_PCILO_TOP (BONITO_PCILO_BASE+BONITO_PCILO_SIZE-1)
+#define BONITO_PCILO0_BASE 0x10000000
+#define BONITO_PCILO1_BASE 0x14000000
+#define BONITO_PCILO2_BASE 0x18000000
+#define BONITO_PCIHI_BASE 0x20000000
+#define BONITO_PCIHI_SIZE 0x20000000
+#define BONITO_PCIHI_TOP (BONITO_PCIHI_BASE+BONITO_PCIHI_SIZE-1)
+#define BONITO_PCIIO_BASE 0x1fd00000
+#define BONITO_PCIIO_SIZE 0x00100000
+#define BONITO_PCIIO_TOP (BONITO_PCIIO_BASE+BONITO_PCIIO_SIZE-1)
+#define BONITO_PCICFG_BASE 0x1fe80000
+#define BONITO_PCICFG_SIZE 0x00080000
+#define BONITO_PCICFG_TOP (BONITO_PCICFG_BASE+BONITO_PCICFG_SIZE-1)
+
+
+/* Bonito Register Bases */
+
+#define BONITO_PCICONFIGBASE 0x00
+#define BONITO_REGBASE 0x100
+
+
+/* PCI Configuration Registers */
+
+#define BONITO_PCI_REG(x) BONITO(BONITO_PCICONFIGBASE + (x))
+#define BONITO_PCIDID BONITO_PCI_REG(0x00)
+#define BONITO_PCICMD BONITO_PCI_REG(0x04)
+#define BONITO_PCICLASS BONITO_PCI_REG(0x08)
+#define BONITO_PCILTIMER BONITO_PCI_REG(0x0c)
+#define BONITO_PCIBASE0 BONITO_PCI_REG(0x10)
+#define BONITO_PCIBASE1 BONITO_PCI_REG(0x14)
+#define BONITO_PCIBASE2 BONITO_PCI_REG(0x18)
+#define BONITO_PCIEXPRBASE BONITO_PCI_REG(0x30)
+#define BONITO_PCIINT BONITO_PCI_REG(0x3c)
+
+#define BONITO_PCICMD_PERR_CLR 0x80000000
+#define BONITO_PCICMD_SERR_CLR 0x40000000
+#define BONITO_PCICMD_MABORT_CLR 0x20000000
+#define BONITO_PCICMD_MTABORT_CLR 0x10000000
+#define BONITO_PCICMD_TABORT_CLR 0x08000000
+#define BONITO_PCICMD_MPERR_CLR 0x01000000
+#define BONITO_PCICMD_PERRRESPEN 0x00000040
+#define BONITO_PCICMD_ASTEPEN 0x00000080
+#define BONITO_PCICMD_SERREN 0x00000100
+#define BONITO_PCILTIMER_BUSLATENCY 0x0000ff00
+#define BONITO_PCILTIMER_BUSLATENCY_SHIFT 8
+
+
+
+
+/* 1. Bonito h/w Configuration */
+/* Power on register */
+
+#define BONITO_BONPONCFG BONITO(BONITO_REGBASE + 0x00)
+
+#define BONITO_BONPONCFG_SYSCONTROLLERRD 0x00040000
+#define BONITO_BONPONCFG_ROMCS1SAMP 0x00020000
+#define BONITO_BONPONCFG_ROMCS0SAMP 0x00010000
+#define BONITO_BONPONCFG_CPUBIGEND 0x00004000
+/* Added by RPF 11-9-00 */
+#define BONITO_BONPONCFG_BURSTORDER 0x00001000
+/* --- */
+#define BONITO_BONPONCFG_CPUPARITY 0x00002000
+#define BONITO_BONPONCFG_CPUTYPE 0x00000007
+#define BONITO_BONPONCFG_CPUTYPE_SHIFT 0
+#define BONITO_BONPONCFG_PCIRESET_OUT 0x00000008
+#define BONITO_BONPONCFG_IS_ARBITER 0x00000010
+#define BONITO_BONPONCFG_ROMBOOT 0x000000c0
+#define BONITO_BONPONCFG_ROMBOOT_SHIFT 6
+
+#define BONITO_BONPONCFG_ROMBOOT_FLASH (0x0<<BONITO_BONPONCFG_ROMBOOT_SHIFT)
+#define BONITO_BONPONCFG_ROMBOOT_SOCKET (0x1<<BONITO_BONPONCFG_ROMBOOT_SHIFT)
+#define BONITO_BONPONCFG_ROMBOOT_SDRAM (0x2<<BONITO_BONPONCFG_ROMBOOT_SHIFT)
+#define BONITO_BONPONCFG_ROMBOOT_CPURESET (0x3<<BONITO_BONPONCFG_ROMBOOT_SHIFT)
+
+#define BONITO_BONPONCFG_ROMCS0WIDTH 0x00000100
+#define BONITO_BONPONCFG_ROMCS1WIDTH 0x00000200
+#define BONITO_BONPONCFG_ROMCS0FAST 0x00000400
+#define BONITO_BONPONCFG_ROMCS1FAST 0x00000800
+#define BONITO_BONPONCFG_CONFIG_DIS 0x00000020
+
+
+/* Other Bonito configuration */
+
+#define BONITO_BONGENCFG_OFFSET 0x4
+#define BONITO_BONGENCFG BONITO(BONITO_REGBASE + BONITO_BONGENCFG_OFFSET)
+
+#define BONITO_BONGENCFG_DEBUGMODE 0x00000001
+#define BONITO_BONGENCFG_SNOOPEN 0x00000002
+#define BONITO_BONGENCFG_CPUSELFRESET 0x00000004
+
+#define BONITO_BONGENCFG_FORCE_IRQA 0x00000008
+#define BONITO_BONGENCFG_IRQA_ISOUT 0x00000010
+#define BONITO_BONGENCFG_IRQA_FROM_INT1 0x00000020
+#define BONITO_BONGENCFG_BYTESWAP 0x00000040
+
+#define BONITO_BONGENCFG_UNCACHED 0x00000080
+#define BONITO_BONGENCFG_PREFETCHEN 0x00000100
+#define BONITO_BONGENCFG_WBEHINDEN 0x00000200
+#define BONITO_BONGENCFG_CACHEALG 0x00000c00
+#define BONITO_BONGENCFG_CACHEALG_SHIFT 10
+#define BONITO_BONGENCFG_PCIQUEUE 0x00001000
+#define BONITO_BONGENCFG_CACHESTOP 0x00002000
+#define BONITO_BONGENCFG_MSTRBYTESWAP 0x00004000
+#define BONITO_BONGENCFG_BUSERREN 0x00008000
+#define BONITO_BONGENCFG_NORETRYTIMEOUT 0x00010000
+#define BONITO_BONGENCFG_SHORTCOPYTIMEOUT 0x00020000
+
+/* 2. IO & IDE configuration */
+
+#define BONITO_IODEVCFG BONITO(BONITO_REGBASE + 0x08)
+
+/* 3. IO & IDE configuration */
+
+#define BONITO_SDCFG BONITO(BONITO_REGBASE + 0x0c)
+
+/* 4. PCI address map control */
+
+#define BONITO_PCIMAP BONITO(BONITO_REGBASE + 0x10)
+#define BONITO_PCIMEMBASECFG BONITO(BONITO_REGBASE + 0x14)
+#define BONITO_PCIMAP_CFG BONITO(BONITO_REGBASE + 0x18)
+
+/* 5. ICU & GPIO regs */
+
+/* GPIO Regs - r/w */
+
+#define BONITO_GPIODATA_OFFSET 0x1c
+#define BONITO_GPIODATA BONITO(BONITO_REGBASE + BONITO_GPIODATA_OFFSET)
+#define BONITO_GPIOIE BONITO(BONITO_REGBASE + 0x20)
+
+/* ICU Configuration Regs - r/w */
+
+#define BONITO_INTEDGE BONITO(BONITO_REGBASE + 0x24)
+#define BONITO_INTSTEER BONITO(BONITO_REGBASE + 0x28)
+#define BONITO_INTPOL BONITO(BONITO_REGBASE + 0x2c)
+
+/* ICU Enable Regs - IntEn & IntISR are r/o. */
+
+#define BONITO_INTENSET BONITO(BONITO_REGBASE + 0x30)
+#define BONITO_INTENCLR BONITO(BONITO_REGBASE + 0x34)
+#define BONITO_INTEN BONITO(BONITO_REGBASE + 0x38)
+#define BONITO_INTISR BONITO(BONITO_REGBASE + 0x3c)
+
+/* PCI mail boxes */
+
+#define BONITO_PCIMAIL0_OFFSET 0x40
+#define BONITO_PCIMAIL1_OFFSET 0x44
+#define BONITO_PCIMAIL2_OFFSET 0x48
+#define BONITO_PCIMAIL3_OFFSET 0x4c
+#define BONITO_PCIMAIL0 BONITO(BONITO_REGBASE + 0x40)
+#define BONITO_PCIMAIL1 BONITO(BONITO_REGBASE + 0x44)
+#define BONITO_PCIMAIL2 BONITO(BONITO_REGBASE + 0x48)
+#define BONITO_PCIMAIL3 BONITO(BONITO_REGBASE + 0x4c)
+
+
+/* 6. PCI cache */
+
+#define BONITO_PCICACHECTRL BONITO(BONITO_REGBASE + 0x50)
+#define BONITO_PCICACHETAG BONITO(BONITO_REGBASE + 0x54)
+
+#define BONITO_PCIBADADDR BONITO(BONITO_REGBASE + 0x58)
+#define BONITO_PCIMSTAT BONITO(BONITO_REGBASE + 0x5c)
+
+
+/*
+#define BONITO_PCIRDPOST BONITO(BONITO_REGBASE + 0x60)
+#define BONITO_PCIDATA BONITO(BONITO_REGBASE + 0x64)
+*/
+
+/* 7. IDE DMA & Copier */
+
+#define BONITO_CONFIGBASE 0x000
+#define BONITO_BONITOBASE 0x100
+#define BONITO_LDMABASE 0x200
+#define BONITO_COPBASE 0x300
+#define BONITO_REG_BLOCKMASK 0x300
+
+#define BONITO_LDMACTRL BONITO(BONITO_LDMABASE + 0x0)
+#define BONITO_LDMASTAT BONITO(BONITO_LDMABASE + 0x0)
+#define BONITO_LDMAADDR BONITO(BONITO_LDMABASE + 0x4)
+#define BONITO_LDMAGO BONITO(BONITO_LDMABASE + 0x8)
+#define BONITO_LDMADATA BONITO(BONITO_LDMABASE + 0xc)
+
+#define BONITO_COPCTRL BONITO(BONITO_COPBASE + 0x0)
+#define BONITO_COPSTAT BONITO(BONITO_COPBASE + 0x0)
+#define BONITO_COPPADDR BONITO(BONITO_COPBASE + 0x4)
+#define BONITO_COPDADDR BONITO(BONITO_COPBASE + 0x8)
+#define BONITO_COPGO BONITO(BONITO_COPBASE + 0xc)
+
+
+/* ###### Bit Definitions for individual Registers #### */
+
+/* Gen DMA. */
+
+#define BONITO_IDECOPDADDR_DMA_DADDR 0x0ffffffc
+#define BONITO_IDECOPDADDR_DMA_DADDR_SHIFT 2
+#define BONITO_IDECOPPADDR_DMA_PADDR 0xfffffffc
+#define BONITO_IDECOPPADDR_DMA_PADDR_SHIFT 2
+#define BONITO_IDECOPGO_DMA_SIZE 0x0000fffe
+#define BONITO_IDECOPGO_DMA_SIZE_SHIFT 0
+#define BONITO_IDECOPGO_DMA_WRITE 0x00010000
+#define BONITO_IDECOPGO_DMAWCOUNT 0x000f0000
+#define BONITO_IDECOPGO_DMAWCOUNT_SHIFT 16
+
+#define BONITO_IDECOPCTRL_DMA_STARTBIT 0x80000000
+#define BONITO_IDECOPCTRL_DMA_RSTBIT 0x40000000
+
+/* DRAM - sdCfg */
+
+#define BONITO_SDCFG_AROWBITS 0x00000003
+#define BONITO_SDCFG_AROWBITS_SHIFT 0
+#define BONITO_SDCFG_ACOLBITS 0x0000000c
+#define BONITO_SDCFG_ACOLBITS_SHIFT 2
+#define BONITO_SDCFG_ABANKBIT 0x00000010
+#define BONITO_SDCFG_ASIDES 0x00000020
+#define BONITO_SDCFG_AABSENT 0x00000040
+#define BONITO_SDCFG_AWIDTH64 0x00000080
+
+#define BONITO_SDCFG_BROWBITS 0x00000300
+#define BONITO_SDCFG_BROWBITS_SHIFT 8
+#define BONITO_SDCFG_BCOLBITS 0x00000c00
+#define BONITO_SDCFG_BCOLBITS_SHIFT 10
+#define BONITO_SDCFG_BBANKBIT 0x00001000
+#define BONITO_SDCFG_BSIDES 0x00002000
+#define BONITO_SDCFG_BABSENT 0x00004000
+#define BONITO_SDCFG_BWIDTH64 0x00008000
+
+#define BONITO_SDCFG_EXTRDDATA 0x00010000
+#define BONITO_SDCFG_EXTRASCAS 0x00020000
+#define BONITO_SDCFG_EXTPRECH 0x00040000
+#define BONITO_SDCFG_EXTRASWIDTH 0x00180000
+#define BONITO_SDCFG_EXTRASWIDTH_SHIFT 19
+/* Changed by RPF 11-9-00 */
+#define BONITO_SDCFG_DRAMMODESET 0x00200000
+/* --- */
+#define BONITO_SDCFG_DRAMEXTREGS 0x00400000
+#define BONITO_SDCFG_DRAMPARITY 0x00800000
+/* Added by RPF 11-9-00 */
+#define BONITO_SDCFG_DRAMBURSTLEN 0x03000000
+#define BONITO_SDCFG_DRAMBURSTLEN_SHIFT 24
+#define BONITO_SDCFG_DRAMMODESET_DONE 0x80000000
+/* --- */
+
+/* PCI Cache - pciCacheCtrl */
+
+#define BONITO_PCICACHECTRL_CACHECMD 0x00000007
+#define BONITO_PCICACHECTRL_CACHECMD_SHIFT 0
+#define BONITO_PCICACHECTRL_CACHECMDLINE 0x00000018
+#define BONITO_PCICACHECTRL_CACHECMDLINE_SHIFT 3
+#define BONITO_PCICACHECTRL_CMDEXEC 0x00000020
+
+#define BONITO_PCICACHECTRL_IOBCCOH_PRES 0x00000100
+#define BONITO_PCICACHECTRL_IOBCCOH_EN 0x00000200
+#define BONITO_PCICACHECTRL_CPUCOH_PRES 0x00000400
+#define BONITO_PCICACHECTRL_CPUCOH_EN 0x00000800
+
+#define BONITO_IODEVCFG_BUFFBIT_CS0 0x00000001
+#define BONITO_IODEVCFG_SPEEDBIT_CS0 0x00000002
+#define BONITO_IODEVCFG_MOREABITS_CS0 0x00000004
+
+#define BONITO_IODEVCFG_BUFFBIT_CS1 0x00000008
+#define BONITO_IODEVCFG_SPEEDBIT_CS1 0x00000010
+#define BONITO_IODEVCFG_MOREABITS_CS1 0x00000020
+
+#define BONITO_IODEVCFG_BUFFBIT_CS2 0x00000040
+#define BONITO_IODEVCFG_SPEEDBIT_CS2 0x00000080
+#define BONITO_IODEVCFG_MOREABITS_CS2 0x00000100
+
+#define BONITO_IODEVCFG_BUFFBIT_CS3 0x00000200
+#define BONITO_IODEVCFG_SPEEDBIT_CS3 0x00000400
+#define BONITO_IODEVCFG_MOREABITS_CS3 0x00000800
+
+#define BONITO_IODEVCFG_BUFFBIT_IDE 0x00001000
+#define BONITO_IODEVCFG_SPEEDBIT_IDE 0x00002000
+#define BONITO_IODEVCFG_WORDSWAPBIT_IDE 0x00004000
+#define BONITO_IODEVCFG_MODEBIT_IDE 0x00008000
+#define BONITO_IODEVCFG_DMAON_IDE 0x001f0000
+#define BONITO_IODEVCFG_DMAON_IDE_SHIFT 16
+#define BONITO_IODEVCFG_DMAOFF_IDE 0x01e00000
+#define BONITO_IODEVCFG_DMAOFF_IDE_SHIFT 21
+#define BONITO_IODEVCFG_EPROMSPLIT 0x02000000
+/* Added by RPF 11-9-00 */
+#define BONITO_IODEVCFG_CPUCLOCKPERIOD 0xfc000000
+#define BONITO_IODEVCFG_CPUCLOCKPERIOD_SHIFT 26
+/* --- */
+
+/* gpio */
+#define BONITO_GPIO_GPIOW 0x000003ff
+#define BONITO_GPIO_GPIOW_SHIFT 0
+#define BONITO_GPIO_GPIOR 0x01ff0000
+#define BONITO_GPIO_GPIOR_SHIFT 16
+#define BONITO_GPIO_GPINR 0xfe000000
+#define BONITO_GPIO_GPINR_SHIFT 25
+#define BONITO_GPIO_IOW(N) (1<<(BONITO_GPIO_GPIOW_SHIFT+(N)))
+#define BONITO_GPIO_IOR(N) (1<<(BONITO_GPIO_GPIOR_SHIFT+(N)))
+#define BONITO_GPIO_INR(N) (1<<(BONITO_GPIO_GPINR_SHIFT+(N)))
+
+/* ICU */
+#define BONITO_ICU_MBOXES 0x0000000f
+#define BONITO_ICU_MBOXES_SHIFT 0
+#define BONITO_ICU_DMARDY 0x00000010
+#define BONITO_ICU_DMAEMPTY 0x00000020
+#define BONITO_ICU_COPYRDY 0x00000040
+#define BONITO_ICU_COPYEMPTY 0x00000080
+#define BONITO_ICU_COPYERR 0x00000100
+#define BONITO_ICU_PCIIRQ 0x00000200
+#define BONITO_ICU_MASTERERR 0x00000400
+#define BONITO_ICU_SYSTEMERR 0x00000800
+#define BONITO_ICU_DRAMPERR 0x00001000
+#define BONITO_ICU_RETRYERR 0x00002000
+#define BONITO_ICU_GPIOS 0x01ff0000
+#define BONITO_ICU_GPIOS_SHIFT 16
+#define BONITO_ICU_GPINS 0x7e000000
+#define BONITO_ICU_GPINS_SHIFT 25
+#define BONITO_ICU_MBOX(N) (1<<(BONITO_ICU_MBOXES_SHIFT+(N)))
+#define BONITO_ICU_GPIO(N) (1<<(BONITO_ICU_GPIOS_SHIFT+(N)))
+#define BONITO_ICU_GPIN(N) (1<<(BONITO_ICU_GPINS_SHIFT+(N)))
+
+/* pcimap */
+
+#define BONITO_PCIMAP_PCIMAP_LO0 0x0000003f
+#define BONITO_PCIMAP_PCIMAP_LO0_SHIFT 0
+#define BONITO_PCIMAP_PCIMAP_LO1 0x00000fc0
+#define BONITO_PCIMAP_PCIMAP_LO1_SHIFT 6
+#define BONITO_PCIMAP_PCIMAP_LO2 0x0003f000
+#define BONITO_PCIMAP_PCIMAP_LO2_SHIFT 12
+#define BONITO_PCIMAP_PCIMAP_2 0x00040000
+#define BONITO_PCIMAP_WIN(WIN, ADDR) ((((ADDR)>>26) & BONITO_PCIMAP_PCIMAP_LO0) << ((WIN)*6))
+
+#define BONITO_PCIMAP_WINSIZE (1<<26)
+#define BONITO_PCIMAP_WINOFFSET(ADDR) ((ADDR) & (BONITO_PCIMAP_WINSIZE - 1))
+#define BONITO_PCIMAP_WINBASE(ADDR) ((ADDR) << 26)
+
+/* pcimembaseCfg */
+
+#define BONITO_PCIMEMBASECFG_MASK 0xf0000000
+#define BONITO_PCIMEMBASECFG_MEMBASE0_MASK 0x0000001f
+#define BONITO_PCIMEMBASECFG_MEMBASE0_MASK_SHIFT 0
+#define BONITO_PCIMEMBASECFG_MEMBASE0_TRANS 0x000003e0
+#define BONITO_PCIMEMBASECFG_MEMBASE0_TRANS_SHIFT 5
+#define BONITO_PCIMEMBASECFG_MEMBASE0_CACHED 0x00000400
+#define BONITO_PCIMEMBASECFG_MEMBASE0_IO 0x00000800
+
+#define BONITO_PCIMEMBASECFG_MEMBASE1_MASK 0x0001f000
+#define BONITO_PCIMEMBASECFG_MEMBASE1_MASK_SHIFT 12
+#define BONITO_PCIMEMBASECFG_MEMBASE1_TRANS 0x003e0000
+#define BONITO_PCIMEMBASECFG_MEMBASE1_TRANS_SHIFT 17
+#define BONITO_PCIMEMBASECFG_MEMBASE1_CACHED 0x00400000
+#define BONITO_PCIMEMBASECFG_MEMBASE1_IO 0x00800000
+
+#define BONITO_PCIMEMBASECFG_ASHIFT 23
+#define BONITO_PCIMEMBASECFG_AMASK 0x007fffff
+#define BONITO_PCIMEMBASECFGSIZE(WIN, SIZE) (((~((SIZE)-1))>>(BONITO_PCIMEMBASECFG_ASHIFT-BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT)) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK)
+#define BONITO_PCIMEMBASECFGBASE(WIN, BASE) (((BASE)>>(BONITO_PCIMEMBASECFG_ASHIFT-BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS_SHIFT)) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS)
+
+#define BONITO_PCIMEMBASECFG_SIZE(WIN, CFG) (((((~(CFG)) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK)) << (BONITO_PCIMEMBASECFG_ASHIFT - BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT)) | BONITO_PCIMEMBASECFG_AMASK)
+
+
+#define BONITO_PCIMEMBASECFG_ADDRMASK(WIN, CFG) ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT)
+#define BONITO_PCIMEMBASECFG_ADDRMASK(WIN, CFG) ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_MASK_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT)
+#define BONITO_PCIMEMBASECFG_ADDRTRANS(WIN, CFG) ((((CFG) & BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS) >> BONITO_PCIMEMBASECFG_MEMBASE##WIN##_TRANS_SHIFT) << BONITO_PCIMEMBASECFG_ASHIFT)
+
+#define BONITO_PCITOPHYS(WIN, ADDR, CFG) ( \
+ (((ADDR) & (~(BONITO_PCIMEMBASECFG_MASK))) & (~(BONITO_PCIMEMBASECFG_ADDRMASK(WIN, CFG)))) | \
+ (BONITO_PCIMEMBASECFG_ADDRTRANS(WIN, CFG)) \
+ )
+
+/* PCICmd */
+
+#define BONITO_PCICMD_MEMEN 0x00000002
+#define BONITO_PCICMD_MSTREN 0x00000004
+
+
+#endif /* _ASM_MIPS_BOARDS_BONITO64_H */
diff --git a/arch/mips/include/asm/mips-boards/generic.h b/arch/mips/include/asm/mips-boards/generic.h
new file mode 100644
index 00000000000..7f0b034dd9a
--- /dev/null
+++ b/arch/mips/include/asm/mips-boards/generic.h
@@ -0,0 +1,104 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Defines of the MIPS boards specific address-MAP, registers, etc.
+ */
+#ifndef __ASM_MIPS_BOARDS_GENERIC_H
+#define __ASM_MIPS_BOARDS_GENERIC_H
+
+#include <asm/addrspace.h>
+#include <asm/byteorder.h>
+#include <asm/mips-boards/bonito64.h>
+
+/*
+ * Display register base.
+ */
+#define ASCII_DISPLAY_WORD_BASE 0x1f000410
+#define ASCII_DISPLAY_POS_BASE 0x1f000418
+
+
+/*
+ * Yamon Prom print address.
+ */
+#define YAMON_PROM_PRINT_ADDR 0x1fc00504
+
+
+/*
+ * Reset register.
+ */
+#define SOFTRES_REG 0x1f000500
+#define GORESET 0x42
+
+/*
+ * Revision register.
+ */
+#define MIPS_REVISION_REG 0x1fc00010
+#define MIPS_REVISION_CORID_QED_RM5261 0
+#define MIPS_REVISION_CORID_CORE_LV 1
+#define MIPS_REVISION_CORID_BONITO64 2
+#define MIPS_REVISION_CORID_CORE_20K 3
+#define MIPS_REVISION_CORID_CORE_FPGA 4
+#define MIPS_REVISION_CORID_CORE_MSC 5
+#define MIPS_REVISION_CORID_CORE_EMUL 6
+#define MIPS_REVISION_CORID_CORE_FPGA2 7
+#define MIPS_REVISION_CORID_CORE_FPGAR2 8
+#define MIPS_REVISION_CORID_CORE_FPGA3 9
+#define MIPS_REVISION_CORID_CORE_24K 10
+#define MIPS_REVISION_CORID_CORE_FPGA4 11
+#define MIPS_REVISION_CORID_CORE_FPGA5 12
+
+/**** Artificial corid defines ****/
+/*
+ * CoreEMUL with Bonito System Controller is treated like a Core20K
+ * CoreEMUL with SOC-it 101 System Controller is treated like a CoreMSC
+ */
+#define MIPS_REVISION_CORID_CORE_EMUL_BON -1
+#define MIPS_REVISION_CORID_CORE_EMUL_MSC -2
+
+#define MIPS_REVISION_CORID (((*(volatile u32 *)ioremap(MIPS_REVISION_REG, 4)) >> 10) & 0x3f)
+
+extern int mips_revision_corid;
+
+#define MIPS_REVISION_SCON_OTHER 0
+#define MIPS_REVISION_SCON_SOCITSC 1
+#define MIPS_REVISION_SCON_SOCITSCP 2
+
+/* Artificial SCON defines for MIPS_REVISION_SCON_OTHER */
+#define MIPS_REVISION_SCON_UNKNOWN -1
+#define MIPS_REVISION_SCON_GT64120 -2
+#define MIPS_REVISION_SCON_BONITO -3
+#define MIPS_REVISION_SCON_BRTL -4
+#define MIPS_REVISION_SCON_SOCIT -5
+#define MIPS_REVISION_SCON_ROCIT -6
+
+#define MIPS_REVISION_SCONID (((*(volatile u32 *)ioremap(MIPS_REVISION_REG, 4)) >> 24) & 0xff)
+
+extern int mips_revision_sconid;
+
+extern void mips_reboot_setup(void);
+
+#ifdef CONFIG_PCI
+extern void mips_pcibios_init(void);
+#else
+#define mips_pcibios_init() do { } while (0)
+#endif
+
+#ifdef CONFIG_KGDB
+extern void kgdb_config(void);
+#endif
+
+#endif /* __ASM_MIPS_BOARDS_GENERIC_H */
diff --git a/arch/mips/include/asm/mips-boards/launch.h b/arch/mips/include/asm/mips-boards/launch.h
new file mode 100644
index 00000000000..d8ae7f95a52
--- /dev/null
+++ b/arch/mips/include/asm/mips-boards/launch.h
@@ -0,0 +1,35 @@
+/*
+ *
+ */
+
+#ifndef _ASSEMBLER_
+
+struct cpulaunch {
+ unsigned long pc;
+ unsigned long gp;
+ unsigned long sp;
+ unsigned long a0;
+ unsigned long _pad[3]; /* pad to cache line size to avoid thrashing */
+ unsigned long flags;
+};
+
+#else
+
+#define LOG2CPULAUNCH 5
+#define LAUNCH_PC 0
+#define LAUNCH_GP 4
+#define LAUNCH_SP 8
+#define LAUNCH_A0 12
+#define LAUNCH_FLAGS 28
+
+#endif
+
+#define LAUNCH_FREADY 1
+#define LAUNCH_FGO 2
+#define LAUNCH_FGONE 4
+
+#define CPULAUNCH 0x00000f00
+#define NCPULAUNCH 8
+
+/* Polling period in count cycles for secondary CPU's */
+#define LAUNCHPERIOD 10000
diff --git a/arch/mips/include/asm/mips-boards/malta.h b/arch/mips/include/asm/mips-boards/malta.h
new file mode 100644
index 00000000000..c1891578fa6
--- /dev/null
+++ b/arch/mips/include/asm/mips-boards/malta.h
@@ -0,0 +1,102 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Defines of the Malta board specific address-MAP, registers, etc.
+ */
+#ifndef __ASM_MIPS_BOARDS_MALTA_H
+#define __ASM_MIPS_BOARDS_MALTA_H
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/mips-boards/msc01_pci.h>
+#include <asm/gt64120.h>
+
+/* Mips interrupt controller found in SOCit variations */
+#define MIPS_MSC01_IC_REG_BASE 0x1bc40000
+#define MIPS_SOCITSC_IC_REG_BASE 0x1ffa0000
+
+/*
+ * Malta I/O ports base address for the Galileo GT64120 and Algorithmics
+ * Bonito system controllers.
+ */
+#define MALTA_GT_PORT_BASE get_gt_port_base(GT_PCI0IOLD_OFS)
+#define MALTA_BONITO_PORT_BASE ((unsigned long)ioremap (0x1fd00000, 0x10000))
+#define MALTA_MSC_PORT_BASE get_msc_port_base(MSC01_PCI_SC2PIOBASL)
+
+static inline unsigned long get_gt_port_base(unsigned long reg)
+{
+ unsigned long addr;
+ addr = GT_READ(reg);
+ return (unsigned long) ioremap (((addr & 0xffff) << 21), 0x10000);
+}
+
+static inline unsigned long get_msc_port_base(unsigned long reg)
+{
+ unsigned long addr;
+ MSC_READ(reg, addr);
+ return (unsigned long) ioremap(addr, 0x10000);
+}
+
+/*
+ * GCMP Specific definitions
+ */
+#define GCMP_BASE_ADDR 0x1fbf8000
+#define GCMP_ADDRSPACE_SZ (256 * 1024)
+
+/*
+ * GIC Specific definitions
+ */
+#define GIC_BASE_ADDR 0x1bdc0000
+#define GIC_ADDRSPACE_SZ (128 * 1024)
+
+/*
+ * MSC01 BIU Specific definitions
+ * FIXME : These should be elsewhere ?
+ */
+#define MSC01_BIU_REG_BASE 0x1bc80000
+#define MSC01_BIU_ADDRSPACE_SZ (256 * 1024)
+#define MSC01_SC_CFG_OFS 0x0110
+#define MSC01_SC_CFG_GICPRES_MSK 0x00000004
+#define MSC01_SC_CFG_GICPRES_SHF 2
+#define MSC01_SC_CFG_GICENA_SHF 3
+
+/*
+ * Malta RTC-device indirect register access.
+ */
+#define MALTA_RTC_ADR_REG 0x70
+#define MALTA_RTC_DAT_REG 0x71
+
+/*
+ * Malta SMSC FDC37M817 Super I/O Controller register.
+ */
+#define SMSC_CONFIG_REG 0x3f0
+#define SMSC_DATA_REG 0x3f1
+
+#define SMSC_CONFIG_DEVNUM 0x7
+#define SMSC_CONFIG_ACTIVATE 0x30
+#define SMSC_CONFIG_ENTER 0x55
+#define SMSC_CONFIG_EXIT 0xaa
+
+#define SMSC_CONFIG_DEVNUM_FLOPPY 0
+
+#define SMSC_CONFIG_ACTIVATE_ENABLE 1
+
+#define SMSC_WRITE(x, a) outb(x, a)
+
+#define MALTA_JMPRS_REG 0x1f000210
+
+#endif /* __ASM_MIPS_BOARDS_MALTA_H */
diff --git a/arch/mips/include/asm/mips-boards/maltaint.h b/arch/mips/include/asm/mips-boards/maltaint.h
new file mode 100644
index 00000000000..cea872fc6f5
--- /dev/null
+++ b/arch/mips/include/asm/mips-boards/maltaint.h
@@ -0,0 +1,110 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * Defines for the Malta interrupt controller.
+ *
+ */
+#ifndef _MIPS_MALTAINT_H
+#define _MIPS_MALTAINT_H
+
+#include <irq.h>
+
+/*
+ * Interrupts 0..15 are used for Malta ISA compatible interrupts
+ */
+#define MALTA_INT_BASE 0
+
+/* CPU interrupt offsets */
+#define MIPSCPU_INT_SW0 0
+#define MIPSCPU_INT_SW1 1
+#define MIPSCPU_INT_MB0 2
+#define MIPSCPU_INT_I8259A MIPSCPU_INT_MB0
+#define MIPSCPU_INT_MB1 3
+#define MIPSCPU_INT_SMI MIPSCPU_INT_MB1
+#define MIPSCPU_INT_IPI0 MIPSCPU_INT_MB1 /* GIC IPI */
+#define MIPSCPU_INT_MB2 4
+#define MIPSCPU_INT_IPI1 MIPSCPU_INT_MB2 /* GIC IPI */
+#define MIPSCPU_INT_MB3 5
+#define MIPSCPU_INT_COREHI MIPSCPU_INT_MB3
+#define MIPSCPU_INT_MB4 6
+#define MIPSCPU_INT_CORELO MIPSCPU_INT_MB4
+
+/*
+ * Interrupts 64..127 are used for Soc-it Classic interrupts
+ */
+#define MSC01C_INT_BASE 64
+
+/* SOC-it Classic interrupt offsets */
+#define MSC01C_INT_TMR 0
+#define MSC01C_INT_PCI 1
+
+/*
+ * Interrupts 64..127 are used for Soc-it EIC interrupts
+ */
+#define MSC01E_INT_BASE 64
+
+/* SOC-it EIC interrupt offsets */
+#define MSC01E_INT_SW0 1
+#define MSC01E_INT_SW1 2
+#define MSC01E_INT_MB0 3
+#define MSC01E_INT_I8259A MSC01E_INT_MB0
+#define MSC01E_INT_MB1 4
+#define MSC01E_INT_SMI MSC01E_INT_MB1
+#define MSC01E_INT_MB2 5
+#define MSC01E_INT_MB3 6
+#define MSC01E_INT_COREHI MSC01E_INT_MB3
+#define MSC01E_INT_MB4 7
+#define MSC01E_INT_CORELO MSC01E_INT_MB4
+#define MSC01E_INT_TMR 8
+#define MSC01E_INT_PCI 9
+#define MSC01E_INT_PERFCTR 10
+#define MSC01E_INT_CPUCTR 11
+
+/* GIC's Nomenclature for Core Interrupt Pins on the Malta */
+#define GIC_CPU_INT0 0 /* Core Interrupt 2 */
+#define GIC_CPU_INT1 1 /* . */
+#define GIC_CPU_INT2 2 /* . */
+#define GIC_CPU_INT3 3 /* . */
+#define GIC_CPU_INT4 4 /* . */
+#define GIC_CPU_INT5 5 /* Core Interrupt 5 */
+
+#define GIC_EXT_INTR(x) x
+
+/* Dummy data */
+#define X 0xdead
+
+/* External Interrupts used for IPI */
+#define GIC_IPI_EXT_INTR_RESCHED_VPE0 16
+#define GIC_IPI_EXT_INTR_CALLFNC_VPE0 17
+#define GIC_IPI_EXT_INTR_RESCHED_VPE1 18
+#define GIC_IPI_EXT_INTR_CALLFNC_VPE1 19
+#define GIC_IPI_EXT_INTR_RESCHED_VPE2 20
+#define GIC_IPI_EXT_INTR_CALLFNC_VPE2 21
+#define GIC_IPI_EXT_INTR_RESCHED_VPE3 22
+#define GIC_IPI_EXT_INTR_CALLFNC_VPE3 23
+
+#define MIPS_GIC_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8)
+
+#ifndef __ASSEMBLY__
+extern void maltaint_init(void);
+#endif
+
+#endif /* !(_MIPS_MALTAINT_H) */
diff --git a/arch/mips/include/asm/mips-boards/msc01_pci.h b/arch/mips/include/asm/mips-boards/msc01_pci.h
new file mode 100644
index 00000000000..e036b7dd6de
--- /dev/null
+++ b/arch/mips/include/asm/mips-boards/msc01_pci.h
@@ -0,0 +1,258 @@
+/*
+ * PCI Register definitions for the MIPS System Controller.
+ *
+ * Copyright (C) 2002, 2005 MIPS Technologies, Inc. All rights reserved.
+ * Authors: Carsten Langgaard <carstenl@mips.com>
+ * Maciej W. Rozycki <macro@mips.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_MIPS_BOARDS_MSC01_PCI_H
+#define __ASM_MIPS_BOARDS_MSC01_PCI_H
+
+/*
+ * Register offset addresses
+ */
+
+#define MSC01_PCI_ID_OFS 0x0000
+#define MSC01_PCI_SC2PMBASL_OFS 0x0208
+#define MSC01_PCI_SC2PMMSKL_OFS 0x0218
+#define MSC01_PCI_SC2PMMAPL_OFS 0x0228
+#define MSC01_PCI_SC2PIOBASL_OFS 0x0248
+#define MSC01_PCI_SC2PIOMSKL_OFS 0x0258
+#define MSC01_PCI_SC2PIOMAPL_OFS 0x0268
+#define MSC01_PCI_P2SCMSKL_OFS 0x0308
+#define MSC01_PCI_P2SCMAPL_OFS 0x0318
+#define MSC01_PCI_INTCFG_OFS 0x0600
+#define MSC01_PCI_INTSTAT_OFS 0x0608
+#define MSC01_PCI_CFGADDR_OFS 0x0610
+#define MSC01_PCI_CFGDATA_OFS 0x0618
+#define MSC01_PCI_IACK_OFS 0x0620
+#define MSC01_PCI_HEAD0_OFS 0x2000 /* DevID, VendorID */
+#define MSC01_PCI_HEAD1_OFS 0x2008 /* Status, Command */
+#define MSC01_PCI_HEAD2_OFS 0x2010 /* Class code, RevID */
+#define MSC01_PCI_HEAD3_OFS 0x2018 /* bist, header, latency */
+#define MSC01_PCI_HEAD4_OFS 0x2020 /* BAR 0 */
+#define MSC01_PCI_HEAD5_OFS 0x2028 /* BAR 1 */
+#define MSC01_PCI_HEAD6_OFS 0x2030 /* BAR 2 */
+#define MSC01_PCI_HEAD7_OFS 0x2038 /* BAR 3 */
+#define MSC01_PCI_HEAD8_OFS 0x2040 /* BAR 4 */
+#define MSC01_PCI_HEAD9_OFS 0x2048 /* BAR 5 */
+#define MSC01_PCI_HEAD10_OFS 0x2050 /* CardBus CIS Ptr */
+#define MSC01_PCI_HEAD11_OFS 0x2058 /* SubSystem ID, -VendorID */
+#define MSC01_PCI_HEAD12_OFS 0x2060 /* ROM BAR */
+#define MSC01_PCI_HEAD13_OFS 0x2068 /* Capabilities ptr */
+#define MSC01_PCI_HEAD14_OFS 0x2070 /* reserved */
+#define MSC01_PCI_HEAD15_OFS 0x2078 /* Maxl, ming, intpin, int */
+#define MSC01_PCI_BAR0_OFS 0x2220
+#define MSC01_PCI_CFG_OFS 0x2380
+#define MSC01_PCI_SWAP_OFS 0x2388
+
+
+/*****************************************************************************
+ * Register encodings
+ ****************************************************************************/
+
+#define MSC01_PCI_ID_ID_SHF 16
+#define MSC01_PCI_ID_ID_MSK 0x00ff0000
+#define MSC01_PCI_ID_ID_HOSTBRIDGE 82
+#define MSC01_PCI_ID_MAR_SHF 8
+#define MSC01_PCI_ID_MAR_MSK 0x0000ff00
+#define MSC01_PCI_ID_MIR_SHF 0
+#define MSC01_PCI_ID_MIR_MSK 0x000000ff
+
+#define MSC01_PCI_SC2PMBASL_BAS_SHF 24
+#define MSC01_PCI_SC2PMBASL_BAS_MSK 0xff000000
+
+#define MSC01_PCI_SC2PMMSKL_MSK_SHF 24
+#define MSC01_PCI_SC2PMMSKL_MSK_MSK 0xff000000
+
+#define MSC01_PCI_SC2PMMAPL_MAP_SHF 24
+#define MSC01_PCI_SC2PMMAPL_MAP_MSK 0xff000000
+
+#define MSC01_PCI_SC2PIOBASL_BAS_SHF 24
+#define MSC01_PCI_SC2PIOBASL_BAS_MSK 0xff000000
+
+#define MSC01_PCI_SC2PIOMSKL_MSK_SHF 24
+#define MSC01_PCI_SC2PIOMSKL_MSK_MSK 0xff000000
+
+#define MSC01_PCI_SC2PIOMAPL_MAP_SHF 24
+#define MSC01_PCI_SC2PIOMAPL_MAP_MSK 0xff000000
+
+#define MSC01_PCI_P2SCMSKL_MSK_SHF 24
+#define MSC01_PCI_P2SCMSKL_MSK_MSK 0xff000000
+
+#define MSC01_PCI_P2SCMAPL_MAP_SHF 24
+#define MSC01_PCI_P2SCMAPL_MAP_MSK 0xff000000
+
+#define MSC01_PCI_INTCFG_RST_SHF 10
+#define MSC01_PCI_INTCFG_RST_MSK 0x00000400
+#define MSC01_PCI_INTCFG_RST_BIT 0x00000400
+#define MSC01_PCI_INTCFG_MWE_SHF 9
+#define MSC01_PCI_INTCFG_MWE_MSK 0x00000200
+#define MSC01_PCI_INTCFG_MWE_BIT 0x00000200
+#define MSC01_PCI_INTCFG_DTO_SHF 8
+#define MSC01_PCI_INTCFG_DTO_MSK 0x00000100
+#define MSC01_PCI_INTCFG_DTO_BIT 0x00000100
+#define MSC01_PCI_INTCFG_MA_SHF 7
+#define MSC01_PCI_INTCFG_MA_MSK 0x00000080
+#define MSC01_PCI_INTCFG_MA_BIT 0x00000080
+#define MSC01_PCI_INTCFG_TA_SHF 6
+#define MSC01_PCI_INTCFG_TA_MSK 0x00000040
+#define MSC01_PCI_INTCFG_TA_BIT 0x00000040
+#define MSC01_PCI_INTCFG_RTY_SHF 5
+#define MSC01_PCI_INTCFG_RTY_MSK 0x00000020
+#define MSC01_PCI_INTCFG_RTY_BIT 0x00000020
+#define MSC01_PCI_INTCFG_MWP_SHF 4
+#define MSC01_PCI_INTCFG_MWP_MSK 0x00000010
+#define MSC01_PCI_INTCFG_MWP_BIT 0x00000010
+#define MSC01_PCI_INTCFG_MRP_SHF 3
+#define MSC01_PCI_INTCFG_MRP_MSK 0x00000008
+#define MSC01_PCI_INTCFG_MRP_BIT 0x00000008
+#define MSC01_PCI_INTCFG_SWP_SHF 2
+#define MSC01_PCI_INTCFG_SWP_MSK 0x00000004
+#define MSC01_PCI_INTCFG_SWP_BIT 0x00000004
+#define MSC01_PCI_INTCFG_SRP_SHF 1
+#define MSC01_PCI_INTCFG_SRP_MSK 0x00000002
+#define MSC01_PCI_INTCFG_SRP_BIT 0x00000002
+#define MSC01_PCI_INTCFG_SE_SHF 0
+#define MSC01_PCI_INTCFG_SE_MSK 0x00000001
+#define MSC01_PCI_INTCFG_SE_BIT 0x00000001
+
+#define MSC01_PCI_INTSTAT_RST_SHF 10
+#define MSC01_PCI_INTSTAT_RST_MSK 0x00000400
+#define MSC01_PCI_INTSTAT_RST_BIT 0x00000400
+#define MSC01_PCI_INTSTAT_MWE_SHF 9
+#define MSC01_PCI_INTSTAT_MWE_MSK 0x00000200
+#define MSC01_PCI_INTSTAT_MWE_BIT 0x00000200
+#define MSC01_PCI_INTSTAT_DTO_SHF 8
+#define MSC01_PCI_INTSTAT_DTO_MSK 0x00000100
+#define MSC01_PCI_INTSTAT_DTO_BIT 0x00000100
+#define MSC01_PCI_INTSTAT_MA_SHF 7
+#define MSC01_PCI_INTSTAT_MA_MSK 0x00000080
+#define MSC01_PCI_INTSTAT_MA_BIT 0x00000080
+#define MSC01_PCI_INTSTAT_TA_SHF 6
+#define MSC01_PCI_INTSTAT_TA_MSK 0x00000040
+#define MSC01_PCI_INTSTAT_TA_BIT 0x00000040
+#define MSC01_PCI_INTSTAT_RTY_SHF 5
+#define MSC01_PCI_INTSTAT_RTY_MSK 0x00000020
+#define MSC01_PCI_INTSTAT_RTY_BIT 0x00000020
+#define MSC01_PCI_INTSTAT_MWP_SHF 4
+#define MSC01_PCI_INTSTAT_MWP_MSK 0x00000010
+#define MSC01_PCI_INTSTAT_MWP_BIT 0x00000010
+#define MSC01_PCI_INTSTAT_MRP_SHF 3
+#define MSC01_PCI_INTSTAT_MRP_MSK 0x00000008
+#define MSC01_PCI_INTSTAT_MRP_BIT 0x00000008
+#define MSC01_PCI_INTSTAT_SWP_SHF 2
+#define MSC01_PCI_INTSTAT_SWP_MSK 0x00000004
+#define MSC01_PCI_INTSTAT_SWP_BIT 0x00000004
+#define MSC01_PCI_INTSTAT_SRP_SHF 1
+#define MSC01_PCI_INTSTAT_SRP_MSK 0x00000002
+#define MSC01_PCI_INTSTAT_SRP_BIT 0x00000002
+#define MSC01_PCI_INTSTAT_SE_SHF 0
+#define MSC01_PCI_INTSTAT_SE_MSK 0x00000001
+#define MSC01_PCI_INTSTAT_SE_BIT 0x00000001
+
+#define MSC01_PCI_CFGADDR_BNUM_SHF 16
+#define MSC01_PCI_CFGADDR_BNUM_MSK 0x00ff0000
+#define MSC01_PCI_CFGADDR_DNUM_SHF 11
+#define MSC01_PCI_CFGADDR_DNUM_MSK 0x0000f800
+#define MSC01_PCI_CFGADDR_FNUM_SHF 8
+#define MSC01_PCI_CFGADDR_FNUM_MSK 0x00000700
+#define MSC01_PCI_CFGADDR_RNUM_SHF 2
+#define MSC01_PCI_CFGADDR_RNUM_MSK 0x000000fc
+
+#define MSC01_PCI_CFGDATA_DATA_SHF 0
+#define MSC01_PCI_CFGDATA_DATA_MSK 0xffffffff
+
+/* The defines below are ONLY valid for a MEM bar! */
+#define MSC01_PCI_BAR0_SIZE_SHF 4
+#define MSC01_PCI_BAR0_SIZE_MSK 0xfffffff0
+#define MSC01_PCI_BAR0_P_SHF 3
+#define MSC01_PCI_BAR0_P_MSK 0x00000008
+#define MSC01_PCI_BAR0_P_BIT MSC01_PCI_BAR0_P_MSK
+#define MSC01_PCI_BAR0_D_SHF 1
+#define MSC01_PCI_BAR0_D_MSK 0x00000006
+#define MSC01_PCI_BAR0_T_SHF 0
+#define MSC01_PCI_BAR0_T_MSK 0x00000001
+#define MSC01_PCI_BAR0_T_BIT MSC01_PCI_BAR0_T_MSK
+
+
+#define MSC01_PCI_CFG_RA_SHF 17
+#define MSC01_PCI_CFG_RA_MSK 0x00020000
+#define MSC01_PCI_CFG_RA_BIT MSC01_PCI_CFG_RA_MSK
+#define MSC01_PCI_CFG_G_SHF 16
+#define MSC01_PCI_CFG_G_MSK 0x00010000
+#define MSC01_PCI_CFG_G_BIT MSC01_PCI_CFG_G_MSK
+#define MSC01_PCI_CFG_EN_SHF 15
+#define MSC01_PCI_CFG_EN_MSK 0x00008000
+#define MSC01_PCI_CFG_EN_BIT MSC01_PCI_CFG_EN_MSK
+#define MSC01_PCI_CFG_MAXRTRY_SHF 0
+#define MSC01_PCI_CFG_MAXRTRY_MSK 0x00000fff
+
+#define MSC01_PCI_SWAP_IO_SHF 18
+#define MSC01_PCI_SWAP_IO_MSK 0x000c0000
+#define MSC01_PCI_SWAP_MEM_SHF 16
+#define MSC01_PCI_SWAP_MEM_MSK 0x00030000
+#define MSC01_PCI_SWAP_BAR0_SHF 0
+#define MSC01_PCI_SWAP_BAR0_MSK 0x00000003
+#define MSC01_PCI_SWAP_NOSWAP 0
+#define MSC01_PCI_SWAP_BYTESWAP 1
+
+/*
+ * MIPS System controller PCI register base.
+ *
+ * FIXME - are these macros specific to Malta and co or to the MSC? If the
+ * latter, they should be moved elsewhere.
+ */
+#define MIPS_MSC01_PCI_REG_BASE 0x1bd00000
+#define MIPS_SOCITSC_PCI_REG_BASE 0x1ff10000
+
+extern unsigned long _pcictrl_msc;
+
+#define MSC01_PCI_REG_BASE _pcictrl_msc
+
+#define MSC_WRITE(reg, data) do { *(volatile u32 *)(reg) = data; } while (0)
+#define MSC_READ(reg, data) do { data = *(volatile u32 *)(reg); } while (0)
+
+/*
+ * Registers absolute addresses
+ */
+
+#define MSC01_PCI_ID (MSC01_PCI_REG_BASE + MSC01_PCI_ID_OFS)
+#define MSC01_PCI_SC2PMBASL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMBASL_OFS)
+#define MSC01_PCI_SC2PMMSKL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMMSKL_OFS)
+#define MSC01_PCI_SC2PMMAPL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PMMAPL_OFS)
+#define MSC01_PCI_SC2PIOBASL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOBASL_OFS)
+#define MSC01_PCI_SC2PIOMSKL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOMSKL_OFS)
+#define MSC01_PCI_SC2PIOMAPL (MSC01_PCI_REG_BASE + MSC01_PCI_SC2PIOMAPL_OFS)
+#define MSC01_PCI_P2SCMSKL (MSC01_PCI_REG_BASE + MSC01_PCI_P2SCMSKL_OFS)
+#define MSC01_PCI_P2SCMAPL (MSC01_PCI_REG_BASE + MSC01_PCI_P2SCMAPL_OFS)
+#define MSC01_PCI_INTCFG (MSC01_PCI_REG_BASE + MSC01_PCI_INTCFG_OFS)
+#define MSC01_PCI_INTSTAT (MSC01_PCI_REG_BASE + MSC01_PCI_INTSTAT_OFS)
+#define MSC01_PCI_CFGADDR (MSC01_PCI_REG_BASE + MSC01_PCI_CFGADDR_OFS)
+#define MSC01_PCI_CFGDATA (MSC01_PCI_REG_BASE + MSC01_PCI_CFGDATA_OFS)
+#define MSC01_PCI_IACK (MSC01_PCI_REG_BASE + MSC01_PCI_IACK_OFS)
+#define MSC01_PCI_HEAD0 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD0_OFS)
+#define MSC01_PCI_HEAD1 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD1_OFS)
+#define MSC01_PCI_HEAD2 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD2_OFS)
+#define MSC01_PCI_HEAD3 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD3_OFS)
+#define MSC01_PCI_HEAD4 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD4_OFS)
+#define MSC01_PCI_HEAD5 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD5_OFS)
+#define MSC01_PCI_HEAD6 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD6_OFS)
+#define MSC01_PCI_HEAD7 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD7_OFS)
+#define MSC01_PCI_HEAD8 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD8_OFS)
+#define MSC01_PCI_HEAD9 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD9_OFS)
+#define MSC01_PCI_HEAD10 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD10_OFS)
+#define MSC01_PCI_HEAD11 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS)
+#define MSC01_PCI_HEAD12 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS)
+#define MSC01_PCI_HEAD13 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS)
+#define MSC01_PCI_HEAD14 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS)
+#define MSC01_PCI_HEAD15 (MSC01_PCI_REG_BASE + MSC01_PCI_HEAD11_OFS)
+#define MSC01_PCI_BAR0 (MSC01_PCI_REG_BASE + MSC01_PCI_BAR0_OFS)
+#define MSC01_PCI_CFG (MSC01_PCI_REG_BASE + MSC01_PCI_CFG_OFS)
+#define MSC01_PCI_SWAP (MSC01_PCI_REG_BASE + MSC01_PCI_SWAP_OFS)
+
+#endif /* __ASM_MIPS_BOARDS_MSC01_PCI_H */
diff --git a/arch/mips/include/asm/mips-boards/piix4.h b/arch/mips/include/asm/mips-boards/piix4.h
new file mode 100644
index 00000000000..2971d60f2e9
--- /dev/null
+++ b/arch/mips/include/asm/mips-boards/piix4.h
@@ -0,0 +1,80 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Register definitions for Intel PIIX4 South Bridge Device.
+ */
+#ifndef __ASM_MIPS_BOARDS_PIIX4_H
+#define __ASM_MIPS_BOARDS_PIIX4_H
+
+/************************************************************************
+ * IO register offsets
+ ************************************************************************/
+#define PIIX4_ICTLR1_ICW1 0x20
+#define PIIX4_ICTLR1_ICW2 0x21
+#define PIIX4_ICTLR1_ICW3 0x21
+#define PIIX4_ICTLR1_ICW4 0x21
+#define PIIX4_ICTLR2_ICW1 0xa0
+#define PIIX4_ICTLR2_ICW2 0xa1
+#define PIIX4_ICTLR2_ICW3 0xa1
+#define PIIX4_ICTLR2_ICW4 0xa1
+#define PIIX4_ICTLR1_OCW1 0x21
+#define PIIX4_ICTLR1_OCW2 0x20
+#define PIIX4_ICTLR1_OCW3 0x20
+#define PIIX4_ICTLR1_OCW4 0x20
+#define PIIX4_ICTLR2_OCW1 0xa1
+#define PIIX4_ICTLR2_OCW2 0xa0
+#define PIIX4_ICTLR2_OCW3 0xa0
+#define PIIX4_ICTLR2_OCW4 0xa0
+
+
+/************************************************************************
+ * Register encodings.
+ ************************************************************************/
+#define PIIX4_OCW2_NSEOI (0x1 << 5)
+#define PIIX4_OCW2_SEOI (0x3 << 5)
+#define PIIX4_OCW2_RNSEOI (0x5 << 5)
+#define PIIX4_OCW2_RAEOIS (0x4 << 5)
+#define PIIX4_OCW2_RAEOIC (0x0 << 5)
+#define PIIX4_OCW2_RSEOI (0x7 << 5)
+#define PIIX4_OCW2_SP (0x6 << 5)
+#define PIIX4_OCW2_NOP (0x2 << 5)
+
+#define PIIX4_OCW2_SEL (0x0 << 3)
+
+#define PIIX4_OCW2_ILS_0 0
+#define PIIX4_OCW2_ILS_1 1
+#define PIIX4_OCW2_ILS_2 2
+#define PIIX4_OCW2_ILS_3 3
+#define PIIX4_OCW2_ILS_4 4
+#define PIIX4_OCW2_ILS_5 5
+#define PIIX4_OCW2_ILS_6 6
+#define PIIX4_OCW2_ILS_7 7
+#define PIIX4_OCW2_ILS_8 0
+#define PIIX4_OCW2_ILS_9 1
+#define PIIX4_OCW2_ILS_10 2
+#define PIIX4_OCW2_ILS_11 3
+#define PIIX4_OCW2_ILS_12 4
+#define PIIX4_OCW2_ILS_13 5
+#define PIIX4_OCW2_ILS_14 6
+#define PIIX4_OCW2_ILS_15 7
+
+#define PIIX4_OCW3_SEL (0x1 << 3)
+
+#define PIIX4_OCW3_IRR 0x2
+#define PIIX4_OCW3_ISR 0x3
+
+#endif /* __ASM_MIPS_BOARDS_PIIX4_H */
diff --git a/arch/mips/include/asm/mips-boards/prom.h b/arch/mips/include/asm/mips-boards/prom.h
new file mode 100644
index 00000000000..a9db576a976
--- /dev/null
+++ b/arch/mips/include/asm/mips-boards/prom.h
@@ -0,0 +1,47 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * MIPS boards bootprom interface for the Linux kernel.
+ *
+ */
+
+#ifndef _MIPS_PROM_H
+#define _MIPS_PROM_H
+
+extern char *prom_getcmdline(void);
+extern char *prom_getenv(char *name);
+extern void prom_init_cmdline(void);
+extern void prom_meminit(void);
+extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem);
+extern void mips_display_message(const char *str);
+extern void mips_display_word(unsigned int num);
+extern void mips_scroll_message(void);
+extern int get_ethernet_addr(char *ethernet_addr);
+
+/* Memory descriptor management. */
+#define PROM_MAX_PMEMBLOCKS 32
+struct prom_pmemblock {
+ unsigned long base; /* Within KSEG0. */
+ unsigned int size; /* In bytes. */
+ unsigned int type; /* free or prom memory */
+};
+
+#endif /* !(_MIPS_PROM_H) */
diff --git a/arch/mips/include/asm/mips-boards/sim.h b/arch/mips/include/asm/mips-boards/sim.h
new file mode 100644
index 00000000000..acb7c2331d9
--- /dev/null
+++ b/arch/mips/include/asm/mips-boards/sim.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+#ifndef _ASM_MIPS_BOARDS_SIM_H
+#define _ASM_MIPS_BOARDS_SIM_H
+
+#define STATS_ON 1
+#define STATS_OFF 2
+#define STATS_CLEAR 3
+#define STATS_DUMP 4
+#define TRACE_ON 5
+#define TRACE_OFF 6
+
+
+#define simcfg(code) \
+({ \
+ __asm__ __volatile__( \
+ "sltiu $0,$0, %0" \
+ ::"i"(code) \
+ ); \
+})
+
+
+
+#endif
diff --git a/arch/mips/include/asm/mips-boards/simint.h b/arch/mips/include/asm/mips-boards/simint.h
new file mode 100644
index 00000000000..8ef6db76d5c
--- /dev/null
+++ b/arch/mips/include/asm/mips-boards/simint.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#ifndef _MIPS_SIMINT_H
+#define _MIPS_SIMINT_H
+
+#include <irq.h>
+
+#define SIM_INT_BASE 0
+#define MIPSCPU_INT_MB0 2
+#define MIPS_CPU_TIMER_IRQ 7
+
+
+#define MSC01E_INT_BASE 64
+
+#define MSC01E_INT_CPUCTR 11
+
+#endif
diff --git a/arch/mips/include/asm/mips_mt.h b/arch/mips/include/asm/mips_mt.h
new file mode 100644
index 00000000000..ac7935203f8
--- /dev/null
+++ b/arch/mips/include/asm/mips_mt.h
@@ -0,0 +1,26 @@
+/*
+ * Definitions and decalrations for MIPS MT support
+ * that are common between SMTC, VSMP, and/or AP/SP
+ * kernel models.
+ */
+#ifndef __ASM_MIPS_MT_H
+#define __ASM_MIPS_MT_H
+
+#include <linux/cpumask.h>
+
+/*
+ * How many VPEs and TCs is Linux allowed to use? 0 means no limit.
+ */
+extern int tclimit;
+extern int vpelimit;
+
+extern cpumask_t mt_fpu_cpumask;
+extern unsigned long mt_fpemul_threshold;
+
+extern void mips_mt_regdump(unsigned long previous_mvpcontrol_value);
+extern void mips_mt_set_cpuoptions(void);
+
+struct class;
+extern struct class *mt_class;
+
+#endif /* __ASM_MIPS_MT_H */
diff --git a/arch/mips/include/asm/mipsmtregs.h b/arch/mips/include/asm/mipsmtregs.h
new file mode 100644
index 00000000000..c9420aa97e3
--- /dev/null
+++ b/arch/mips/include/asm/mipsmtregs.h
@@ -0,0 +1,395 @@
+/*
+ * MT regs definitions, follows on from mipsregs.h
+ * Copyright (C) 2004 - 2005 MIPS Technologies, Inc. All rights reserved.
+ * Elizabeth Clarke et. al.
+ *
+ */
+#ifndef _ASM_MIPSMTREGS_H
+#define _ASM_MIPSMTREGS_H
+
+#include <asm/mipsregs.h>
+#include <asm/war.h>
+
+#ifndef __ASSEMBLY__
+
+/*
+ * C macros
+ */
+
+#define read_c0_mvpcontrol() __read_32bit_c0_register($0, 1)
+#define write_c0_mvpcontrol(val) __write_32bit_c0_register($0, 1, val)
+
+#define read_c0_mvpconf0() __read_32bit_c0_register($0, 2)
+#define read_c0_mvpconf1() __read_32bit_c0_register($0, 3)
+
+#define read_c0_vpecontrol() __read_32bit_c0_register($1, 1)
+#define write_c0_vpecontrol(val) __write_32bit_c0_register($1, 1, val)
+
+#define read_c0_vpeconf0() __read_32bit_c0_register($1, 2)
+#define write_c0_vpeconf0(val) __write_32bit_c0_register($1, 2, val)
+
+#define read_c0_tcstatus() __read_32bit_c0_register($2, 1)
+#define write_c0_tcstatus(val) __write_32bit_c0_register($2, 1, val)
+
+#define read_c0_tcbind() __read_32bit_c0_register($2, 2)
+
+#define read_c0_tccontext() __read_32bit_c0_register($2, 5)
+#define write_c0_tccontext(val) __write_32bit_c0_register($2, 5, val)
+
+#else /* Assembly */
+/*
+ * Macros for use in assembly language code
+ */
+
+#define CP0_MVPCONTROL $0, 1
+#define CP0_MVPCONF0 $0, 2
+#define CP0_MVPCONF1 $0, 3
+#define CP0_VPECONTROL $1, 1
+#define CP0_VPECONF0 $1, 2
+#define CP0_VPECONF1 $1, 3
+#define CP0_YQMASK $1, 4
+#define CP0_VPESCHEDULE $1, 5
+#define CP0_VPESCHEFBK $1, 6
+#define CP0_TCSTATUS $2, 1
+#define CP0_TCBIND $2, 2
+#define CP0_TCRESTART $2, 3
+#define CP0_TCHALT $2, 4
+#define CP0_TCCONTEXT $2, 5
+#define CP0_TCSCHEDULE $2, 6
+#define CP0_TCSCHEFBK $2, 7
+#define CP0_SRSCONF0 $6, 1
+#define CP0_SRSCONF1 $6, 2
+#define CP0_SRSCONF2 $6, 3
+#define CP0_SRSCONF3 $6, 4
+#define CP0_SRSCONF4 $6, 5
+
+#endif
+
+/* MVPControl fields */
+#define MVPCONTROL_EVP (_ULCAST_(1))
+
+#define MVPCONTROL_VPC_SHIFT 1
+#define MVPCONTROL_VPC (_ULCAST_(1) << MVPCONTROL_VPC_SHIFT)
+
+#define MVPCONTROL_STLB_SHIFT 2
+#define MVPCONTROL_STLB (_ULCAST_(1) << MVPCONTROL_STLB_SHIFT)
+
+
+/* MVPConf0 fields */
+#define MVPCONF0_PTC_SHIFT 0
+#define MVPCONF0_PTC ( _ULCAST_(0xff))
+#define MVPCONF0_PVPE_SHIFT 10
+#define MVPCONF0_PVPE ( _ULCAST_(0xf) << MVPCONF0_PVPE_SHIFT)
+#define MVPCONF0_TCA_SHIFT 15
+#define MVPCONF0_TCA ( _ULCAST_(1) << MVPCONF0_TCA_SHIFT)
+#define MVPCONF0_PTLBE_SHIFT 16
+#define MVPCONF0_PTLBE (_ULCAST_(0x3ff) << MVPCONF0_PTLBE_SHIFT)
+#define MVPCONF0_TLBS_SHIFT 29
+#define MVPCONF0_TLBS (_ULCAST_(1) << MVPCONF0_TLBS_SHIFT)
+#define MVPCONF0_M_SHIFT 31
+#define MVPCONF0_M (_ULCAST_(0x1) << MVPCONF0_M_SHIFT)
+
+
+/* config3 fields */
+#define CONFIG3_MT_SHIFT 2
+#define CONFIG3_MT (_ULCAST_(1) << CONFIG3_MT_SHIFT)
+
+
+/* VPEControl fields (per VPE) */
+#define VPECONTROL_TARGTC (_ULCAST_(0xff))
+
+#define VPECONTROL_TE_SHIFT 15
+#define VPECONTROL_TE (_ULCAST_(1) << VPECONTROL_TE_SHIFT)
+#define VPECONTROL_EXCPT_SHIFT 16
+#define VPECONTROL_EXCPT (_ULCAST_(0x7) << VPECONTROL_EXCPT_SHIFT)
+
+/* Thread Exception Codes for EXCPT field */
+#define THREX_TU 0
+#define THREX_TO 1
+#define THREX_IYQ 2
+#define THREX_GSX 3
+#define THREX_YSCH 4
+#define THREX_GSSCH 5
+
+#define VPECONTROL_GSI_SHIFT 20
+#define VPECONTROL_GSI (_ULCAST_(1) << VPECONTROL_GSI_SHIFT)
+#define VPECONTROL_YSI_SHIFT 21
+#define VPECONTROL_YSI (_ULCAST_(1) << VPECONTROL_YSI_SHIFT)
+
+/* VPEConf0 fields (per VPE) */
+#define VPECONF0_VPA_SHIFT 0
+#define VPECONF0_VPA (_ULCAST_(1) << VPECONF0_VPA_SHIFT)
+#define VPECONF0_MVP_SHIFT 1
+#define VPECONF0_MVP (_ULCAST_(1) << VPECONF0_MVP_SHIFT)
+#define VPECONF0_XTC_SHIFT 21
+#define VPECONF0_XTC (_ULCAST_(0xff) << VPECONF0_XTC_SHIFT)
+
+/* TCStatus fields (per TC) */
+#define TCSTATUS_TASID (_ULCAST_(0xff))
+#define TCSTATUS_IXMT_SHIFT 10
+#define TCSTATUS_IXMT (_ULCAST_(1) << TCSTATUS_IXMT_SHIFT)
+#define TCSTATUS_TKSU_SHIFT 11
+#define TCSTATUS_TKSU (_ULCAST_(3) << TCSTATUS_TKSU_SHIFT)
+#define TCSTATUS_A_SHIFT 13
+#define TCSTATUS_A (_ULCAST_(1) << TCSTATUS_A_SHIFT)
+#define TCSTATUS_DA_SHIFT 15
+#define TCSTATUS_DA (_ULCAST_(1) << TCSTATUS_DA_SHIFT)
+#define TCSTATUS_DT_SHIFT 20
+#define TCSTATUS_DT (_ULCAST_(1) << TCSTATUS_DT_SHIFT)
+#define TCSTATUS_TDS_SHIFT 21
+#define TCSTATUS_TDS (_ULCAST_(1) << TCSTATUS_TDS_SHIFT)
+#define TCSTATUS_TSST_SHIFT 22
+#define TCSTATUS_TSST (_ULCAST_(1) << TCSTATUS_TSST_SHIFT)
+#define TCSTATUS_RNST_SHIFT 23
+#define TCSTATUS_RNST (_ULCAST_(3) << TCSTATUS_RNST_SHIFT)
+/* Codes for RNST */
+#define TC_RUNNING 0
+#define TC_WAITING 1
+#define TC_YIELDING 2
+#define TC_GATED 3
+
+#define TCSTATUS_TMX_SHIFT 27
+#define TCSTATUS_TMX (_ULCAST_(1) << TCSTATUS_TMX_SHIFT)
+/* TCStatus TCU bits can use same definitions/offsets as CU bits in Status */
+
+/* TCBind */
+#define TCBIND_CURVPE_SHIFT 0
+#define TCBIND_CURVPE (_ULCAST_(0xf))
+
+#define TCBIND_CURTC_SHIFT 21
+
+#define TCBIND_CURTC (_ULCAST_(0xff) << TCBIND_CURTC_SHIFT)
+
+/* TCHalt */
+#define TCHALT_H (_ULCAST_(1))
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned int dvpe(void)
+{
+ int res = 0;
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " .set noat \n"
+ " .set mips32r2 \n"
+ " .word 0x41610001 # dvpe $1 \n"
+ " move %0, $1 \n"
+ " ehb \n"
+ " .set pop \n"
+ : "=r" (res));
+
+ instruction_hazard();
+
+ return res;
+}
+
+static inline void __raw_evpe(void)
+{
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " .set noat \n"
+ " .set mips32r2 \n"
+ " .word 0x41600021 # evpe \n"
+ " ehb \n"
+ " .set pop \n");
+}
+
+/* Enable virtual processor execution if previous suggested it should be.
+ EVPE_ENABLE to force */
+
+#define EVPE_ENABLE MVPCONTROL_EVP
+
+static inline void evpe(int previous)
+{
+ if ((previous & MVPCONTROL_EVP))
+ __raw_evpe();
+}
+
+static inline unsigned int dmt(void)
+{
+ int res;
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set mips32r2 \n"
+ " .set noat \n"
+ " .word 0x41610BC1 # dmt $1 \n"
+ " ehb \n"
+ " move %0, $1 \n"
+ " .set pop \n"
+ : "=r" (res));
+
+ instruction_hazard();
+
+ return res;
+}
+
+static inline void __raw_emt(void)
+{
+ __asm__ __volatile__(
+ " .set noreorder \n"
+ " .set mips32r2 \n"
+ " .word 0x41600be1 # emt \n"
+ " ehb \n"
+ " .set mips0 \n"
+ " .set reorder");
+}
+
+/* enable multi-threaded execution if previous suggested it should be.
+ EMT_ENABLE to force */
+
+#define EMT_ENABLE VPECONTROL_TE
+
+static inline void emt(int previous)
+{
+ if ((previous & EMT_ENABLE))
+ __raw_emt();
+}
+
+static inline void ehb(void)
+{
+ __asm__ __volatile__(
+ " .set mips32r2 \n"
+ " ehb \n"
+ " .set mips0 \n");
+}
+
+#define mftc0(rt,sel) \
+({ \
+ unsigned long __res; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set mips32r2 \n" \
+ " .set noat \n" \
+ " # mftc0 $1, $" #rt ", " #sel " \n" \
+ " .word 0x41000800 | (" #rt " << 16) | " #sel " \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__res)); \
+ \
+ __res; \
+})
+
+#define mftgpr(rt) \
+({ \
+ unsigned long __res; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " .set mips32r2 \n" \
+ " # mftgpr $1," #rt " \n" \
+ " .word 0x41000820 | (" #rt " << 16) \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__res)); \
+ \
+ __res; \
+})
+
+#define mftr(rt, u, sel) \
+({ \
+ unsigned long __res; \
+ \
+ __asm__ __volatile__( \
+ " mftr %0, " #rt ", " #u ", " #sel " \n" \
+ : "=r" (__res)); \
+ \
+ __res; \
+})
+
+#define mttgpr(rd,v) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set mips32r2 \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mttgpr $1, " #rd " \n" \
+ " .word 0x41810020 | (" #rd " << 11) \n" \
+ " .set pop \n" \
+ : : "r" (v)); \
+} while (0)
+
+#define mttc0(rd, sel, v) \
+({ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set mips32r2 \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mttc0 %0," #rd ", " #sel " \n" \
+ " .word 0x41810000 | (" #rd " << 11) | " #sel " \n" \
+ " .set pop \n" \
+ : \
+ : "r" (v)); \
+})
+
+
+#define mttr(rd, u, sel, v) \
+({ \
+ __asm__ __volatile__( \
+ "mttr %0," #rd ", " #u ", " #sel \
+ : : "r" (v)); \
+})
+
+
+#define settc(tc) \
+do { \
+ write_c0_vpecontrol((read_c0_vpecontrol()&~VPECONTROL_TARGTC) | (tc)); \
+ ehb(); \
+} while (0)
+
+
+/* you *must* set the target tc (settc) before trying to use these */
+#define read_vpe_c0_vpecontrol() mftc0(1, 1)
+#define write_vpe_c0_vpecontrol(val) mttc0(1, 1, val)
+#define read_vpe_c0_vpeconf0() mftc0(1, 2)
+#define write_vpe_c0_vpeconf0(val) mttc0(1, 2, val)
+#define read_vpe_c0_count() mftc0(9, 0)
+#define write_vpe_c0_count(val) mttc0(9, 0, val)
+#define read_vpe_c0_status() mftc0(12, 0)
+#define write_vpe_c0_status(val) mttc0(12, 0, val)
+#define read_vpe_c0_cause() mftc0(13, 0)
+#define write_vpe_c0_cause(val) mttc0(13, 0, val)
+#define read_vpe_c0_config() mftc0(16, 0)
+#define write_vpe_c0_config(val) mttc0(16, 0, val)
+#define read_vpe_c0_config1() mftc0(16, 1)
+#define write_vpe_c0_config1(val) mttc0(16, 1, val)
+#define read_vpe_c0_config7() mftc0(16, 7)
+#define write_vpe_c0_config7(val) mttc0(16, 7, val)
+#define read_vpe_c0_ebase() mftc0(15, 1)
+#define write_vpe_c0_ebase(val) mttc0(15, 1, val)
+#define write_vpe_c0_compare(val) mttc0(11, 0, val)
+#define read_vpe_c0_badvaddr() mftc0(8, 0)
+#define read_vpe_c0_epc() mftc0(14, 0)
+#define write_vpe_c0_epc(val) mttc0(14, 0, val)
+
+
+/* TC */
+#define read_tc_c0_tcstatus() mftc0(2, 1)
+#define write_tc_c0_tcstatus(val) mttc0(2, 1, val)
+#define read_tc_c0_tcbind() mftc0(2, 2)
+#define write_tc_c0_tcbind(val) mttc0(2, 2, val)
+#define read_tc_c0_tcrestart() mftc0(2, 3)
+#define write_tc_c0_tcrestart(val) mttc0(2, 3, val)
+#define read_tc_c0_tchalt() mftc0(2, 4)
+#define write_tc_c0_tchalt(val) mttc0(2, 4, val)
+#define read_tc_c0_tccontext() mftc0(2, 5)
+#define write_tc_c0_tccontext(val) mttc0(2, 5, val)
+
+/* GPR */
+#define read_tc_gpr_sp() mftgpr(29)
+#define write_tc_gpr_sp(val) mttgpr(29, val)
+#define read_tc_gpr_gp() mftgpr(28)
+#define write_tc_gpr_gp(val) mttgpr(28, val)
+
+__BUILD_SET_C0(mvpcontrol)
+
+#endif /* Not __ASSEMBLY__ */
+
+#endif
diff --git a/arch/mips/include/asm/mipsprom.h b/arch/mips/include/asm/mipsprom.h
new file mode 100644
index 00000000000..146d41b67ad
--- /dev/null
+++ b/arch/mips/include/asm/mipsprom.h
@@ -0,0 +1,76 @@
+#ifndef __ASM_MIPS_PROM_H
+#define __ASM_MIPS_PROM_H
+
+#define PROM_RESET 0
+#define PROM_EXEC 1
+#define PROM_RESTART 2
+#define PROM_REINIT 3
+#define PROM_REBOOT 4
+#define PROM_AUTOBOOT 5
+#define PROM_OPEN 6
+#define PROM_READ 7
+#define PROM_WRITE 8
+#define PROM_IOCTL 9
+#define PROM_CLOSE 10
+#define PROM_GETCHAR 11
+#define PROM_PUTCHAR 12
+#define PROM_SHOWCHAR 13 /* XXX */
+#define PROM_GETS 14 /* XXX */
+#define PROM_PUTS 15 /* XXX */
+#define PROM_PRINTF 16 /* XXX */
+
+/* What are these for? */
+#define PROM_INITPROTO 17 /* XXX */
+#define PROM_PROTOENABLE 18 /* XXX */
+#define PROM_PROTODISABLE 19 /* XXX */
+#define PROM_GETPKT 20 /* XXX */
+#define PROM_PUTPKT 21 /* XXX */
+
+/* More PROM shit. Probably has to do with VME RMW cycles??? */
+#define PROM_ORW_RMW 22 /* XXX */
+#define PROM_ORH_RMW 23 /* XXX */
+#define PROM_ORB_RMW 24 /* XXX */
+#define PROM_ANDW_RMW 25 /* XXX */
+#define PROM_ANDH_RMW 26 /* XXX */
+#define PROM_ANDB_RMW 27 /* XXX */
+
+/* Cache handling stuff */
+#define PROM_FLUSHCACHE 28 /* XXX */
+#define PROM_CLEARCACHE 29 /* XXX */
+
+/* Libc alike stuff */
+#define PROM_SETJMP 30 /* XXX */
+#define PROM_LONGJMP 31 /* XXX */
+#define PROM_BEVUTLB 32 /* XXX */
+#define PROM_GETENV 33 /* XXX */
+#define PROM_SETENV 34 /* XXX */
+#define PROM_ATOB 35 /* XXX */
+#define PROM_STRCMP 36 /* XXX */
+#define PROM_STRLEN 37 /* XXX */
+#define PROM_STRCPY 38 /* XXX */
+#define PROM_STRCAT 39 /* XXX */
+
+/* Misc stuff */
+#define PROM_PARSER 40 /* XXX */
+#define PROM_RANGE 41 /* XXX */
+#define PROM_ARGVIZE 42 /* XXX */
+#define PROM_HELP 43 /* XXX */
+
+/* Entry points for some PROM commands */
+#define PROM_DUMPCMD 44 /* XXX */
+#define PROM_SETENVCMD 45 /* XXX */
+#define PROM_UNSETENVCMD 46 /* XXX */
+#define PROM_PRINTENVCMD 47 /* XXX */
+#define PROM_BEVEXCEPT 48 /* XXX */
+#define PROM_ENABLECMD 49 /* XXX */
+#define PROM_DISABLECMD 50 /* XXX */
+
+#define PROM_CLEARNOFAULT 51 /* XXX */
+#define PROM_NOTIMPLEMENT 52 /* XXX */
+
+#define PROM_NV_GET 53 /* XXX */
+#define PROM_NV_SET 54 /* XXX */
+
+extern char *prom_getenv(char *);
+
+#endif /* __ASM_MIPS_PROM_H */
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
new file mode 100644
index 00000000000..979866000da
--- /dev/null
+++ b/arch/mips/include/asm/mipsregs.h
@@ -0,0 +1,1526 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995, 1996, 1997, 2000, 2001 by Ralf Baechle
+ * Copyright (C) 2000 Silicon Graphics, Inc.
+ * Modified for further R[236]000 support by Paul M. Antoine, 1996.
+ * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000, 07 MIPS Technologies, Inc.
+ * Copyright (C) 2003, 2004 Maciej W. Rozycki
+ */
+#ifndef _ASM_MIPSREGS_H
+#define _ASM_MIPSREGS_H
+
+#include <linux/linkage.h>
+#include <asm/hazards.h>
+#include <asm/war.h>
+
+/*
+ * The following macros are especially useful for __asm__
+ * inline assembler.
+ */
+#ifndef __STR
+#define __STR(x) #x
+#endif
+#ifndef STR
+#define STR(x) __STR(x)
+#endif
+
+/*
+ * Configure language
+ */
+#ifdef __ASSEMBLY__
+#define _ULCAST_
+#else
+#define _ULCAST_ (unsigned long)
+#endif
+
+/*
+ * Coprocessor 0 register names
+ */
+#define CP0_INDEX $0
+#define CP0_RANDOM $1
+#define CP0_ENTRYLO0 $2
+#define CP0_ENTRYLO1 $3
+#define CP0_CONF $3
+#define CP0_CONTEXT $4
+#define CP0_PAGEMASK $5
+#define CP0_WIRED $6
+#define CP0_INFO $7
+#define CP0_BADVADDR $8
+#define CP0_COUNT $9
+#define CP0_ENTRYHI $10
+#define CP0_COMPARE $11
+#define CP0_STATUS $12
+#define CP0_CAUSE $13
+#define CP0_EPC $14
+#define CP0_PRID $15
+#define CP0_CONFIG $16
+#define CP0_LLADDR $17
+#define CP0_WATCHLO $18
+#define CP0_WATCHHI $19
+#define CP0_XCONTEXT $20
+#define CP0_FRAMEMASK $21
+#define CP0_DIAGNOSTIC $22
+#define CP0_DEBUG $23
+#define CP0_DEPC $24
+#define CP0_PERFORMANCE $25
+#define CP0_ECC $26
+#define CP0_CACHEERR $27
+#define CP0_TAGLO $28
+#define CP0_TAGHI $29
+#define CP0_ERROREPC $30
+#define CP0_DESAVE $31
+
+/*
+ * R4640/R4650 cp0 register names. These registers are listed
+ * here only for completeness; without MMU these CPUs are not useable
+ * by Linux. A future ELKS port might take make Linux run on them
+ * though ...
+ */
+#define CP0_IBASE $0
+#define CP0_IBOUND $1
+#define CP0_DBASE $2
+#define CP0_DBOUND $3
+#define CP0_CALG $17
+#define CP0_IWATCH $18
+#define CP0_DWATCH $19
+
+/*
+ * Coprocessor 0 Set 1 register names
+ */
+#define CP0_S1_DERRADDR0 $26
+#define CP0_S1_DERRADDR1 $27
+#define CP0_S1_INTCONTROL $20
+
+/*
+ * Coprocessor 0 Set 2 register names
+ */
+#define CP0_S2_SRSCTL $12 /* MIPSR2 */
+
+/*
+ * Coprocessor 0 Set 3 register names
+ */
+#define CP0_S3_SRSMAP $12 /* MIPSR2 */
+
+/*
+ * TX39 Series
+ */
+#define CP0_TX39_CACHE $7
+
+/*
+ * Coprocessor 1 (FPU) register names
+ */
+#define CP1_REVISION $0
+#define CP1_STATUS $31
+
+/*
+ * FPU Status Register Values
+ */
+/*
+ * Status Register Values
+ */
+
+#define FPU_CSR_FLUSH 0x01000000 /* flush denormalised results to 0 */
+#define FPU_CSR_COND 0x00800000 /* $fcc0 */
+#define FPU_CSR_COND0 0x00800000 /* $fcc0 */
+#define FPU_CSR_COND1 0x02000000 /* $fcc1 */
+#define FPU_CSR_COND2 0x04000000 /* $fcc2 */
+#define FPU_CSR_COND3 0x08000000 /* $fcc3 */
+#define FPU_CSR_COND4 0x10000000 /* $fcc4 */
+#define FPU_CSR_COND5 0x20000000 /* $fcc5 */
+#define FPU_CSR_COND6 0x40000000 /* $fcc6 */
+#define FPU_CSR_COND7 0x80000000 /* $fcc7 */
+
+/*
+ * X the exception cause indicator
+ * E the exception enable
+ * S the sticky/flag bit
+*/
+#define FPU_CSR_ALL_X 0x0003f000
+#define FPU_CSR_UNI_X 0x00020000
+#define FPU_CSR_INV_X 0x00010000
+#define FPU_CSR_DIV_X 0x00008000
+#define FPU_CSR_OVF_X 0x00004000
+#define FPU_CSR_UDF_X 0x00002000
+#define FPU_CSR_INE_X 0x00001000
+
+#define FPU_CSR_ALL_E 0x00000f80
+#define FPU_CSR_INV_E 0x00000800
+#define FPU_CSR_DIV_E 0x00000400
+#define FPU_CSR_OVF_E 0x00000200
+#define FPU_CSR_UDF_E 0x00000100
+#define FPU_CSR_INE_E 0x00000080
+
+#define FPU_CSR_ALL_S 0x0000007c
+#define FPU_CSR_INV_S 0x00000040
+#define FPU_CSR_DIV_S 0x00000020
+#define FPU_CSR_OVF_S 0x00000010
+#define FPU_CSR_UDF_S 0x00000008
+#define FPU_CSR_INE_S 0x00000004
+
+/* rounding mode */
+#define FPU_CSR_RN 0x0 /* nearest */
+#define FPU_CSR_RZ 0x1 /* towards zero */
+#define FPU_CSR_RU 0x2 /* towards +Infinity */
+#define FPU_CSR_RD 0x3 /* towards -Infinity */
+
+
+/*
+ * Values for PageMask register
+ */
+#ifdef CONFIG_CPU_VR41XX
+
+/* Why doesn't stupidity hurt ... */
+
+#define PM_1K 0x00000000
+#define PM_4K 0x00001800
+#define PM_16K 0x00007800
+#define PM_64K 0x0001f800
+#define PM_256K 0x0007f800
+
+#else
+
+#define PM_4K 0x00000000
+#define PM_16K 0x00006000
+#define PM_64K 0x0001e000
+#define PM_256K 0x0007e000
+#define PM_1M 0x001fe000
+#define PM_4M 0x007fe000
+#define PM_16M 0x01ffe000
+#define PM_64M 0x07ffe000
+#define PM_256M 0x1fffe000
+
+#endif
+
+/*
+ * Default page size for a given kernel configuration
+ */
+#ifdef CONFIG_PAGE_SIZE_4KB
+#define PM_DEFAULT_MASK PM_4K
+#elif defined(CONFIG_PAGE_SIZE_16KB)
+#define PM_DEFAULT_MASK PM_16K
+#elif defined(CONFIG_PAGE_SIZE_64KB)
+#define PM_DEFAULT_MASK PM_64K
+#else
+#error Bad page size configuration!
+#endif
+
+
+/*
+ * Values used for computation of new tlb entries
+ */
+#define PL_4K 12
+#define PL_16K 14
+#define PL_64K 16
+#define PL_256K 18
+#define PL_1M 20
+#define PL_4M 22
+#define PL_16M 24
+#define PL_64M 26
+#define PL_256M 28
+
+/*
+ * R4x00 interrupt enable / cause bits
+ */
+#define IE_SW0 (_ULCAST_(1) << 8)
+#define IE_SW1 (_ULCAST_(1) << 9)
+#define IE_IRQ0 (_ULCAST_(1) << 10)
+#define IE_IRQ1 (_ULCAST_(1) << 11)
+#define IE_IRQ2 (_ULCAST_(1) << 12)
+#define IE_IRQ3 (_ULCAST_(1) << 13)
+#define IE_IRQ4 (_ULCAST_(1) << 14)
+#define IE_IRQ5 (_ULCAST_(1) << 15)
+
+/*
+ * R4x00 interrupt cause bits
+ */
+#define C_SW0 (_ULCAST_(1) << 8)
+#define C_SW1 (_ULCAST_(1) << 9)
+#define C_IRQ0 (_ULCAST_(1) << 10)
+#define C_IRQ1 (_ULCAST_(1) << 11)
+#define C_IRQ2 (_ULCAST_(1) << 12)
+#define C_IRQ3 (_ULCAST_(1) << 13)
+#define C_IRQ4 (_ULCAST_(1) << 14)
+#define C_IRQ5 (_ULCAST_(1) << 15)
+
+/*
+ * Bitfields in the R4xx0 cp0 status register
+ */
+#define ST0_IE 0x00000001
+#define ST0_EXL 0x00000002
+#define ST0_ERL 0x00000004
+#define ST0_KSU 0x00000018
+# define KSU_USER 0x00000010
+# define KSU_SUPERVISOR 0x00000008
+# define KSU_KERNEL 0x00000000
+#define ST0_UX 0x00000020
+#define ST0_SX 0x00000040
+#define ST0_KX 0x00000080
+#define ST0_DE 0x00010000
+#define ST0_CE 0x00020000
+
+/*
+ * Setting c0_status.co enables Hit_Writeback and Hit_Writeback_Invalidate
+ * cacheops in userspace. This bit exists only on RM7000 and RM9000
+ * processors.
+ */
+#define ST0_CO 0x08000000
+
+/*
+ * Bitfields in the R[23]000 cp0 status register.
+ */
+#define ST0_IEC 0x00000001
+#define ST0_KUC 0x00000002
+#define ST0_IEP 0x00000004
+#define ST0_KUP 0x00000008
+#define ST0_IEO 0x00000010
+#define ST0_KUO 0x00000020
+/* bits 6 & 7 are reserved on R[23]000 */
+#define ST0_ISC 0x00010000
+#define ST0_SWC 0x00020000
+#define ST0_CM 0x00080000
+
+/*
+ * Bits specific to the R4640/R4650
+ */
+#define ST0_UM (_ULCAST_(1) << 4)
+#define ST0_IL (_ULCAST_(1) << 23)
+#define ST0_DL (_ULCAST_(1) << 24)
+
+/*
+ * Enable the MIPS MDMX and DSP ASEs
+ */
+#define ST0_MX 0x01000000
+
+/*
+ * Bitfields in the TX39 family CP0 Configuration Register 3
+ */
+#define TX39_CONF_ICS_SHIFT 19
+#define TX39_CONF_ICS_MASK 0x00380000
+#define TX39_CONF_ICS_1KB 0x00000000
+#define TX39_CONF_ICS_2KB 0x00080000
+#define TX39_CONF_ICS_4KB 0x00100000
+#define TX39_CONF_ICS_8KB 0x00180000
+#define TX39_CONF_ICS_16KB 0x00200000
+
+#define TX39_CONF_DCS_SHIFT 16
+#define TX39_CONF_DCS_MASK 0x00070000
+#define TX39_CONF_DCS_1KB 0x00000000
+#define TX39_CONF_DCS_2KB 0x00010000
+#define TX39_CONF_DCS_4KB 0x00020000
+#define TX39_CONF_DCS_8KB 0x00030000
+#define TX39_CONF_DCS_16KB 0x00040000
+
+#define TX39_CONF_CWFON 0x00004000
+#define TX39_CONF_WBON 0x00002000
+#define TX39_CONF_RF_SHIFT 10
+#define TX39_CONF_RF_MASK 0x00000c00
+#define TX39_CONF_DOZE 0x00000200
+#define TX39_CONF_HALT 0x00000100
+#define TX39_CONF_LOCK 0x00000080
+#define TX39_CONF_ICE 0x00000020
+#define TX39_CONF_DCE 0x00000010
+#define TX39_CONF_IRSIZE_SHIFT 2
+#define TX39_CONF_IRSIZE_MASK 0x0000000c
+#define TX39_CONF_DRSIZE_SHIFT 0
+#define TX39_CONF_DRSIZE_MASK 0x00000003
+
+/*
+ * Status register bits available in all MIPS CPUs.
+ */
+#define ST0_IM 0x0000ff00
+#define STATUSB_IP0 8
+#define STATUSF_IP0 (_ULCAST_(1) << 8)
+#define STATUSB_IP1 9
+#define STATUSF_IP1 (_ULCAST_(1) << 9)
+#define STATUSB_IP2 10
+#define STATUSF_IP2 (_ULCAST_(1) << 10)
+#define STATUSB_IP3 11
+#define STATUSF_IP3 (_ULCAST_(1) << 11)
+#define STATUSB_IP4 12
+#define STATUSF_IP4 (_ULCAST_(1) << 12)
+#define STATUSB_IP5 13
+#define STATUSF_IP5 (_ULCAST_(1) << 13)
+#define STATUSB_IP6 14
+#define STATUSF_IP6 (_ULCAST_(1) << 14)
+#define STATUSB_IP7 15
+#define STATUSF_IP7 (_ULCAST_(1) << 15)
+#define STATUSB_IP8 0
+#define STATUSF_IP8 (_ULCAST_(1) << 0)
+#define STATUSB_IP9 1
+#define STATUSF_IP9 (_ULCAST_(1) << 1)
+#define STATUSB_IP10 2
+#define STATUSF_IP10 (_ULCAST_(1) << 2)
+#define STATUSB_IP11 3
+#define STATUSF_IP11 (_ULCAST_(1) << 3)
+#define STATUSB_IP12 4
+#define STATUSF_IP12 (_ULCAST_(1) << 4)
+#define STATUSB_IP13 5
+#define STATUSF_IP13 (_ULCAST_(1) << 5)
+#define STATUSB_IP14 6
+#define STATUSF_IP14 (_ULCAST_(1) << 6)
+#define STATUSB_IP15 7
+#define STATUSF_IP15 (_ULCAST_(1) << 7)
+#define ST0_CH 0x00040000
+#define ST0_SR 0x00100000
+#define ST0_TS 0x00200000
+#define ST0_BEV 0x00400000
+#define ST0_RE 0x02000000
+#define ST0_FR 0x04000000
+#define ST0_CU 0xf0000000
+#define ST0_CU0 0x10000000
+#define ST0_CU1 0x20000000
+#define ST0_CU2 0x40000000
+#define ST0_CU3 0x80000000
+#define ST0_XX 0x80000000 /* MIPS IV naming */
+
+/*
+ * Bitfields and bit numbers in the coprocessor 0 cause register.
+ *
+ * Refer to your MIPS R4xx0 manual, chapter 5 for explanation.
+ */
+#define CAUSEB_EXCCODE 2
+#define CAUSEF_EXCCODE (_ULCAST_(31) << 2)
+#define CAUSEB_IP 8
+#define CAUSEF_IP (_ULCAST_(255) << 8)
+#define CAUSEB_IP0 8
+#define CAUSEF_IP0 (_ULCAST_(1) << 8)
+#define CAUSEB_IP1 9
+#define CAUSEF_IP1 (_ULCAST_(1) << 9)
+#define CAUSEB_IP2 10
+#define CAUSEF_IP2 (_ULCAST_(1) << 10)
+#define CAUSEB_IP3 11
+#define CAUSEF_IP3 (_ULCAST_(1) << 11)
+#define CAUSEB_IP4 12
+#define CAUSEF_IP4 (_ULCAST_(1) << 12)
+#define CAUSEB_IP5 13
+#define CAUSEF_IP5 (_ULCAST_(1) << 13)
+#define CAUSEB_IP6 14
+#define CAUSEF_IP6 (_ULCAST_(1) << 14)
+#define CAUSEB_IP7 15
+#define CAUSEF_IP7 (_ULCAST_(1) << 15)
+#define CAUSEB_IV 23
+#define CAUSEF_IV (_ULCAST_(1) << 23)
+#define CAUSEB_CE 28
+#define CAUSEF_CE (_ULCAST_(3) << 28)
+#define CAUSEB_BD 31
+#define CAUSEF_BD (_ULCAST_(1) << 31)
+
+/*
+ * Bits in the coprocessor 0 config register.
+ */
+/* Generic bits. */
+#define CONF_CM_CACHABLE_NO_WA 0
+#define CONF_CM_CACHABLE_WA 1
+#define CONF_CM_UNCACHED 2
+#define CONF_CM_CACHABLE_NONCOHERENT 3
+#define CONF_CM_CACHABLE_CE 4
+#define CONF_CM_CACHABLE_COW 5
+#define CONF_CM_CACHABLE_CUW 6
+#define CONF_CM_CACHABLE_ACCELERATED 7
+#define CONF_CM_CMASK 7
+#define CONF_BE (_ULCAST_(1) << 15)
+
+/* Bits common to various processors. */
+#define CONF_CU (_ULCAST_(1) << 3)
+#define CONF_DB (_ULCAST_(1) << 4)
+#define CONF_IB (_ULCAST_(1) << 5)
+#define CONF_DC (_ULCAST_(7) << 6)
+#define CONF_IC (_ULCAST_(7) << 9)
+#define CONF_EB (_ULCAST_(1) << 13)
+#define CONF_EM (_ULCAST_(1) << 14)
+#define CONF_SM (_ULCAST_(1) << 16)
+#define CONF_SC (_ULCAST_(1) << 17)
+#define CONF_EW (_ULCAST_(3) << 18)
+#define CONF_EP (_ULCAST_(15)<< 24)
+#define CONF_EC (_ULCAST_(7) << 28)
+#define CONF_CM (_ULCAST_(1) << 31)
+
+/* Bits specific to the R4xx0. */
+#define R4K_CONF_SW (_ULCAST_(1) << 20)
+#define R4K_CONF_SS (_ULCAST_(1) << 21)
+#define R4K_CONF_SB (_ULCAST_(3) << 22)
+
+/* Bits specific to the R5000. */
+#define R5K_CONF_SE (_ULCAST_(1) << 12)
+#define R5K_CONF_SS (_ULCAST_(3) << 20)
+
+/* Bits specific to the RM7000. */
+#define RM7K_CONF_SE (_ULCAST_(1) << 3)
+#define RM7K_CONF_TE (_ULCAST_(1) << 12)
+#define RM7K_CONF_CLK (_ULCAST_(1) << 16)
+#define RM7K_CONF_TC (_ULCAST_(1) << 17)
+#define RM7K_CONF_SI (_ULCAST_(3) << 20)
+#define RM7K_CONF_SC (_ULCAST_(1) << 31)
+
+/* Bits specific to the R10000. */
+#define R10K_CONF_DN (_ULCAST_(3) << 3)
+#define R10K_CONF_CT (_ULCAST_(1) << 5)
+#define R10K_CONF_PE (_ULCAST_(1) << 6)
+#define R10K_CONF_PM (_ULCAST_(3) << 7)
+#define R10K_CONF_EC (_ULCAST_(15)<< 9)
+#define R10K_CONF_SB (_ULCAST_(1) << 13)
+#define R10K_CONF_SK (_ULCAST_(1) << 14)
+#define R10K_CONF_SS (_ULCAST_(7) << 16)
+#define R10K_CONF_SC (_ULCAST_(7) << 19)
+#define R10K_CONF_DC (_ULCAST_(7) << 26)
+#define R10K_CONF_IC (_ULCAST_(7) << 29)
+
+/* Bits specific to the VR41xx. */
+#define VR41_CONF_CS (_ULCAST_(1) << 12)
+#define VR41_CONF_P4K (_ULCAST_(1) << 13)
+#define VR41_CONF_BP (_ULCAST_(1) << 16)
+#define VR41_CONF_M16 (_ULCAST_(1) << 20)
+#define VR41_CONF_AD (_ULCAST_(1) << 23)
+
+/* Bits specific to the R30xx. */
+#define R30XX_CONF_FDM (_ULCAST_(1) << 19)
+#define R30XX_CONF_REV (_ULCAST_(1) << 22)
+#define R30XX_CONF_AC (_ULCAST_(1) << 23)
+#define R30XX_CONF_RF (_ULCAST_(1) << 24)
+#define R30XX_CONF_HALT (_ULCAST_(1) << 25)
+#define R30XX_CONF_FPINT (_ULCAST_(7) << 26)
+#define R30XX_CONF_DBR (_ULCAST_(1) << 29)
+#define R30XX_CONF_SB (_ULCAST_(1) << 30)
+#define R30XX_CONF_LOCK (_ULCAST_(1) << 31)
+
+/* Bits specific to the TX49. */
+#define TX49_CONF_DC (_ULCAST_(1) << 16)
+#define TX49_CONF_IC (_ULCAST_(1) << 17) /* conflict with CONF_SC */
+#define TX49_CONF_HALT (_ULCAST_(1) << 18)
+#define TX49_CONF_CWFON (_ULCAST_(1) << 27)
+
+/* Bits specific to the MIPS32/64 PRA. */
+#define MIPS_CONF_MT (_ULCAST_(7) << 7)
+#define MIPS_CONF_AR (_ULCAST_(7) << 10)
+#define MIPS_CONF_AT (_ULCAST_(3) << 13)
+#define MIPS_CONF_M (_ULCAST_(1) << 31)
+
+/*
+ * Bits in the MIPS32/64 PRA coprocessor 0 config registers 1 and above.
+ */
+#define MIPS_CONF1_FP (_ULCAST_(1) << 0)
+#define MIPS_CONF1_EP (_ULCAST_(1) << 1)
+#define MIPS_CONF1_CA (_ULCAST_(1) << 2)
+#define MIPS_CONF1_WR (_ULCAST_(1) << 3)
+#define MIPS_CONF1_PC (_ULCAST_(1) << 4)
+#define MIPS_CONF1_MD (_ULCAST_(1) << 5)
+#define MIPS_CONF1_C2 (_ULCAST_(1) << 6)
+#define MIPS_CONF1_DA (_ULCAST_(7) << 7)
+#define MIPS_CONF1_DL (_ULCAST_(7) << 10)
+#define MIPS_CONF1_DS (_ULCAST_(7) << 13)
+#define MIPS_CONF1_IA (_ULCAST_(7) << 16)
+#define MIPS_CONF1_IL (_ULCAST_(7) << 19)
+#define MIPS_CONF1_IS (_ULCAST_(7) << 22)
+#define MIPS_CONF1_TLBS (_ULCAST_(63)<< 25)
+
+#define MIPS_CONF2_SA (_ULCAST_(15)<< 0)
+#define MIPS_CONF2_SL (_ULCAST_(15)<< 4)
+#define MIPS_CONF2_SS (_ULCAST_(15)<< 8)
+#define MIPS_CONF2_SU (_ULCAST_(15)<< 12)
+#define MIPS_CONF2_TA (_ULCAST_(15)<< 16)
+#define MIPS_CONF2_TL (_ULCAST_(15)<< 20)
+#define MIPS_CONF2_TS (_ULCAST_(15)<< 24)
+#define MIPS_CONF2_TU (_ULCAST_(7) << 28)
+
+#define MIPS_CONF3_TL (_ULCAST_(1) << 0)
+#define MIPS_CONF3_SM (_ULCAST_(1) << 1)
+#define MIPS_CONF3_MT (_ULCAST_(1) << 2)
+#define MIPS_CONF3_SP (_ULCAST_(1) << 4)
+#define MIPS_CONF3_VINT (_ULCAST_(1) << 5)
+#define MIPS_CONF3_VEIC (_ULCAST_(1) << 6)
+#define MIPS_CONF3_LPA (_ULCAST_(1) << 7)
+#define MIPS_CONF3_DSP (_ULCAST_(1) << 10)
+#define MIPS_CONF3_ULRI (_ULCAST_(1) << 13)
+
+#define MIPS_CONF7_WII (_ULCAST_(1) << 31)
+
+#define MIPS_CONF7_RPS (_ULCAST_(1) << 2)
+
+
+/*
+ * Bits in the MIPS32/64 coprocessor 1 (FPU) revision register.
+ */
+#define MIPS_FPIR_S (_ULCAST_(1) << 16)
+#define MIPS_FPIR_D (_ULCAST_(1) << 17)
+#define MIPS_FPIR_PS (_ULCAST_(1) << 18)
+#define MIPS_FPIR_3D (_ULCAST_(1) << 19)
+#define MIPS_FPIR_W (_ULCAST_(1) << 20)
+#define MIPS_FPIR_L (_ULCAST_(1) << 21)
+#define MIPS_FPIR_F64 (_ULCAST_(1) << 22)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Functions to access the R10000 performance counters. These are basically
+ * mfc0 and mtc0 instructions from and to coprocessor register with a 5-bit
+ * performance counter number encoded into bits 1 ... 5 of the instruction.
+ * Only performance counters 0 to 1 actually exist, so for a non-R10000 aware
+ * disassembler these will look like an access to sel 0 or 1.
+ */
+#define read_r10k_perf_cntr(counter) \
+({ \
+ unsigned int __res; \
+ __asm__ __volatile__( \
+ "mfpc\t%0, %1" \
+ : "=r" (__res) \
+ : "i" (counter)); \
+ \
+ __res; \
+})
+
+#define write_r10k_perf_cntr(counter,val) \
+do { \
+ __asm__ __volatile__( \
+ "mtpc\t%0, %1" \
+ : \
+ : "r" (val), "i" (counter)); \
+} while (0)
+
+#define read_r10k_perf_event(counter) \
+({ \
+ unsigned int __res; \
+ __asm__ __volatile__( \
+ "mfps\t%0, %1" \
+ : "=r" (__res) \
+ : "i" (counter)); \
+ \
+ __res; \
+})
+
+#define write_r10k_perf_cntl(counter,val) \
+do { \
+ __asm__ __volatile__( \
+ "mtps\t%0, %1" \
+ : \
+ : "r" (val), "i" (counter)); \
+} while (0)
+
+
+/*
+ * Macros to access the system control coprocessor
+ */
+
+#define __read_32bit_c0_register(source, sel) \
+({ int __res; \
+ if (sel == 0) \
+ __asm__ __volatile__( \
+ "mfc0\t%0, " #source "\n\t" \
+ : "=r" (__res)); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips32\n\t" \
+ "mfc0\t%0, " #source ", " #sel "\n\t" \
+ ".set\tmips0\n\t" \
+ : "=r" (__res)); \
+ __res; \
+})
+
+#define __read_64bit_c0_register(source, sel) \
+({ unsigned long long __res; \
+ if (sizeof(unsigned long) == 4) \
+ __res = __read_64bit_c0_split(source, sel); \
+ else if (sel == 0) \
+ __asm__ __volatile__( \
+ ".set\tmips3\n\t" \
+ "dmfc0\t%0, " #source "\n\t" \
+ ".set\tmips0" \
+ : "=r" (__res)); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dmfc0\t%0, " #source ", " #sel "\n\t" \
+ ".set\tmips0" \
+ : "=r" (__res)); \
+ __res; \
+})
+
+#define __write_32bit_c0_register(register, sel, value) \
+do { \
+ if (sel == 0) \
+ __asm__ __volatile__( \
+ "mtc0\t%z0, " #register "\n\t" \
+ : : "Jr" ((unsigned int)(value))); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips32\n\t" \
+ "mtc0\t%z0, " #register ", " #sel "\n\t" \
+ ".set\tmips0" \
+ : : "Jr" ((unsigned int)(value))); \
+} while (0)
+
+#define __write_64bit_c0_register(register, sel, value) \
+do { \
+ if (sizeof(unsigned long) == 4) \
+ __write_64bit_c0_split(register, sel, value); \
+ else if (sel == 0) \
+ __asm__ __volatile__( \
+ ".set\tmips3\n\t" \
+ "dmtc0\t%z0, " #register "\n\t" \
+ ".set\tmips0" \
+ : : "Jr" (value)); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dmtc0\t%z0, " #register ", " #sel "\n\t" \
+ ".set\tmips0" \
+ : : "Jr" (value)); \
+} while (0)
+
+#define __read_ulong_c0_register(reg, sel) \
+ ((sizeof(unsigned long) == 4) ? \
+ (unsigned long) __read_32bit_c0_register(reg, sel) : \
+ (unsigned long) __read_64bit_c0_register(reg, sel))
+
+#define __write_ulong_c0_register(reg, sel, val) \
+do { \
+ if (sizeof(unsigned long) == 4) \
+ __write_32bit_c0_register(reg, sel, val); \
+ else \
+ __write_64bit_c0_register(reg, sel, val); \
+} while (0)
+
+/*
+ * On RM7000/RM9000 these are uses to access cop0 set 1 registers
+ */
+#define __read_32bit_c0_ctrl_register(source) \
+({ int __res; \
+ __asm__ __volatile__( \
+ "cfc0\t%0, " #source "\n\t" \
+ : "=r" (__res)); \
+ __res; \
+})
+
+#define __write_32bit_c0_ctrl_register(register, value) \
+do { \
+ __asm__ __volatile__( \
+ "ctc0\t%z0, " #register "\n\t" \
+ : : "Jr" ((unsigned int)(value))); \
+} while (0)
+
+/*
+ * These versions are only needed for systems with more than 38 bits of
+ * physical address space running the 32-bit kernel. That's none atm :-)
+ */
+#define __read_64bit_c0_split(source, sel) \
+({ \
+ unsigned long long __val; \
+ unsigned long __flags; \
+ \
+ local_irq_save(__flags); \
+ if (sel == 0) \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dmfc0\t%M0, " #source "\n\t" \
+ "dsll\t%L0, %M0, 32\n\t" \
+ "dsrl\t%M0, %M0, 32\n\t" \
+ "dsrl\t%L0, %L0, 32\n\t" \
+ ".set\tmips0" \
+ : "=r" (__val)); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dmfc0\t%M0, " #source ", " #sel "\n\t" \
+ "dsll\t%L0, %M0, 32\n\t" \
+ "dsrl\t%M0, %M0, 32\n\t" \
+ "dsrl\t%L0, %L0, 32\n\t" \
+ ".set\tmips0" \
+ : "=r" (__val)); \
+ local_irq_restore(__flags); \
+ \
+ __val; \
+})
+
+#define __write_64bit_c0_split(source, sel, val) \
+do { \
+ unsigned long __flags; \
+ \
+ local_irq_save(__flags); \
+ if (sel == 0) \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dsll\t%L0, %L0, 32\n\t" \
+ "dsrl\t%L0, %L0, 32\n\t" \
+ "dsll\t%M0, %M0, 32\n\t" \
+ "or\t%L0, %L0, %M0\n\t" \
+ "dmtc0\t%L0, " #source "\n\t" \
+ ".set\tmips0" \
+ : : "r" (val)); \
+ else \
+ __asm__ __volatile__( \
+ ".set\tmips64\n\t" \
+ "dsll\t%L0, %L0, 32\n\t" \
+ "dsrl\t%L0, %L0, 32\n\t" \
+ "dsll\t%M0, %M0, 32\n\t" \
+ "or\t%L0, %L0, %M0\n\t" \
+ "dmtc0\t%L0, " #source ", " #sel "\n\t" \
+ ".set\tmips0" \
+ : : "r" (val)); \
+ local_irq_restore(__flags); \
+} while (0)
+
+#define read_c0_index() __read_32bit_c0_register($0, 0)
+#define write_c0_index(val) __write_32bit_c0_register($0, 0, val)
+
+#define read_c0_random() __read_32bit_c0_register($1, 0)
+#define write_c0_random(val) __write_32bit_c0_register($1, 0, val)
+
+#define read_c0_entrylo0() __read_ulong_c0_register($2, 0)
+#define write_c0_entrylo0(val) __write_ulong_c0_register($2, 0, val)
+
+#define read_c0_entrylo1() __read_ulong_c0_register($3, 0)
+#define write_c0_entrylo1(val) __write_ulong_c0_register($3, 0, val)
+
+#define read_c0_conf() __read_32bit_c0_register($3, 0)
+#define write_c0_conf(val) __write_32bit_c0_register($3, 0, val)
+
+#define read_c0_context() __read_ulong_c0_register($4, 0)
+#define write_c0_context(val) __write_ulong_c0_register($4, 0, val)
+
+#define read_c0_userlocal() __read_ulong_c0_register($4, 2)
+#define write_c0_userlocal(val) __write_ulong_c0_register($4, 2, val)
+
+#define read_c0_pagemask() __read_32bit_c0_register($5, 0)
+#define write_c0_pagemask(val) __write_32bit_c0_register($5, 0, val)
+
+#define read_c0_wired() __read_32bit_c0_register($6, 0)
+#define write_c0_wired(val) __write_32bit_c0_register($6, 0, val)
+
+#define read_c0_info() __read_32bit_c0_register($7, 0)
+
+#define read_c0_cache() __read_32bit_c0_register($7, 0) /* TX39xx */
+#define write_c0_cache(val) __write_32bit_c0_register($7, 0, val)
+
+#define read_c0_badvaddr() __read_ulong_c0_register($8, 0)
+#define write_c0_badvaddr(val) __write_ulong_c0_register($8, 0, val)
+
+#define read_c0_count() __read_32bit_c0_register($9, 0)
+#define write_c0_count(val) __write_32bit_c0_register($9, 0, val)
+
+#define read_c0_count2() __read_32bit_c0_register($9, 6) /* pnx8550 */
+#define write_c0_count2(val) __write_32bit_c0_register($9, 6, val)
+
+#define read_c0_count3() __read_32bit_c0_register($9, 7) /* pnx8550 */
+#define write_c0_count3(val) __write_32bit_c0_register($9, 7, val)
+
+#define read_c0_entryhi() __read_ulong_c0_register($10, 0)
+#define write_c0_entryhi(val) __write_ulong_c0_register($10, 0, val)
+
+#define read_c0_compare() __read_32bit_c0_register($11, 0)
+#define write_c0_compare(val) __write_32bit_c0_register($11, 0, val)
+
+#define read_c0_compare2() __read_32bit_c0_register($11, 6) /* pnx8550 */
+#define write_c0_compare2(val) __write_32bit_c0_register($11, 6, val)
+
+#define read_c0_compare3() __read_32bit_c0_register($11, 7) /* pnx8550 */
+#define write_c0_compare3(val) __write_32bit_c0_register($11, 7, val)
+
+#define read_c0_status() __read_32bit_c0_register($12, 0)
+#ifdef CONFIG_MIPS_MT_SMTC
+#define write_c0_status(val) \
+do { \
+ __write_32bit_c0_register($12, 0, val); \
+ __ehb(); \
+} while (0)
+#else
+/*
+ * Legacy non-SMTC code, which may be hazardous
+ * but which might not support EHB
+ */
+#define write_c0_status(val) __write_32bit_c0_register($12, 0, val)
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+#define read_c0_cause() __read_32bit_c0_register($13, 0)
+#define write_c0_cause(val) __write_32bit_c0_register($13, 0, val)
+
+#define read_c0_epc() __read_ulong_c0_register($14, 0)
+#define write_c0_epc(val) __write_ulong_c0_register($14, 0, val)
+
+#define read_c0_prid() __read_32bit_c0_register($15, 0)
+
+#define read_c0_config() __read_32bit_c0_register($16, 0)
+#define read_c0_config1() __read_32bit_c0_register($16, 1)
+#define read_c0_config2() __read_32bit_c0_register($16, 2)
+#define read_c0_config3() __read_32bit_c0_register($16, 3)
+#define read_c0_config4() __read_32bit_c0_register($16, 4)
+#define read_c0_config5() __read_32bit_c0_register($16, 5)
+#define read_c0_config6() __read_32bit_c0_register($16, 6)
+#define read_c0_config7() __read_32bit_c0_register($16, 7)
+#define write_c0_config(val) __write_32bit_c0_register($16, 0, val)
+#define write_c0_config1(val) __write_32bit_c0_register($16, 1, val)
+#define write_c0_config2(val) __write_32bit_c0_register($16, 2, val)
+#define write_c0_config3(val) __write_32bit_c0_register($16, 3, val)
+#define write_c0_config4(val) __write_32bit_c0_register($16, 4, val)
+#define write_c0_config5(val) __write_32bit_c0_register($16, 5, val)
+#define write_c0_config6(val) __write_32bit_c0_register($16, 6, val)
+#define write_c0_config7(val) __write_32bit_c0_register($16, 7, val)
+
+/*
+ * The WatchLo register. There may be upto 8 of them.
+ */
+#define read_c0_watchlo0() __read_ulong_c0_register($18, 0)
+#define read_c0_watchlo1() __read_ulong_c0_register($18, 1)
+#define read_c0_watchlo2() __read_ulong_c0_register($18, 2)
+#define read_c0_watchlo3() __read_ulong_c0_register($18, 3)
+#define read_c0_watchlo4() __read_ulong_c0_register($18, 4)
+#define read_c0_watchlo5() __read_ulong_c0_register($18, 5)
+#define read_c0_watchlo6() __read_ulong_c0_register($18, 6)
+#define read_c0_watchlo7() __read_ulong_c0_register($18, 7)
+#define write_c0_watchlo0(val) __write_ulong_c0_register($18, 0, val)
+#define write_c0_watchlo1(val) __write_ulong_c0_register($18, 1, val)
+#define write_c0_watchlo2(val) __write_ulong_c0_register($18, 2, val)
+#define write_c0_watchlo3(val) __write_ulong_c0_register($18, 3, val)
+#define write_c0_watchlo4(val) __write_ulong_c0_register($18, 4, val)
+#define write_c0_watchlo5(val) __write_ulong_c0_register($18, 5, val)
+#define write_c0_watchlo6(val) __write_ulong_c0_register($18, 6, val)
+#define write_c0_watchlo7(val) __write_ulong_c0_register($18, 7, val)
+
+/*
+ * The WatchHi register. There may be upto 8 of them.
+ */
+#define read_c0_watchhi0() __read_32bit_c0_register($19, 0)
+#define read_c0_watchhi1() __read_32bit_c0_register($19, 1)
+#define read_c0_watchhi2() __read_32bit_c0_register($19, 2)
+#define read_c0_watchhi3() __read_32bit_c0_register($19, 3)
+#define read_c0_watchhi4() __read_32bit_c0_register($19, 4)
+#define read_c0_watchhi5() __read_32bit_c0_register($19, 5)
+#define read_c0_watchhi6() __read_32bit_c0_register($19, 6)
+#define read_c0_watchhi7() __read_32bit_c0_register($19, 7)
+
+#define write_c0_watchhi0(val) __write_32bit_c0_register($19, 0, val)
+#define write_c0_watchhi1(val) __write_32bit_c0_register($19, 1, val)
+#define write_c0_watchhi2(val) __write_32bit_c0_register($19, 2, val)
+#define write_c0_watchhi3(val) __write_32bit_c0_register($19, 3, val)
+#define write_c0_watchhi4(val) __write_32bit_c0_register($19, 4, val)
+#define write_c0_watchhi5(val) __write_32bit_c0_register($19, 5, val)
+#define write_c0_watchhi6(val) __write_32bit_c0_register($19, 6, val)
+#define write_c0_watchhi7(val) __write_32bit_c0_register($19, 7, val)
+
+#define read_c0_xcontext() __read_ulong_c0_register($20, 0)
+#define write_c0_xcontext(val) __write_ulong_c0_register($20, 0, val)
+
+#define read_c0_intcontrol() __read_32bit_c0_ctrl_register($20)
+#define write_c0_intcontrol(val) __write_32bit_c0_ctrl_register($20, val)
+
+#define read_c0_framemask() __read_32bit_c0_register($21, 0)
+#define write_c0_framemask(val) __write_32bit_c0_register($21, 0, val)
+
+/* RM9000 PerfControl performance counter control register */
+#define read_c0_perfcontrol() __read_32bit_c0_register($22, 0)
+#define write_c0_perfcontrol(val) __write_32bit_c0_register($22, 0, val)
+
+#define read_c0_diag() __read_32bit_c0_register($22, 0)
+#define write_c0_diag(val) __write_32bit_c0_register($22, 0, val)
+
+#define read_c0_diag1() __read_32bit_c0_register($22, 1)
+#define write_c0_diag1(val) __write_32bit_c0_register($22, 1, val)
+
+#define read_c0_diag2() __read_32bit_c0_register($22, 2)
+#define write_c0_diag2(val) __write_32bit_c0_register($22, 2, val)
+
+#define read_c0_diag3() __read_32bit_c0_register($22, 3)
+#define write_c0_diag3(val) __write_32bit_c0_register($22, 3, val)
+
+#define read_c0_diag4() __read_32bit_c0_register($22, 4)
+#define write_c0_diag4(val) __write_32bit_c0_register($22, 4, val)
+
+#define read_c0_diag5() __read_32bit_c0_register($22, 5)
+#define write_c0_diag5(val) __write_32bit_c0_register($22, 5, val)
+
+#define read_c0_debug() __read_32bit_c0_register($23, 0)
+#define write_c0_debug(val) __write_32bit_c0_register($23, 0, val)
+
+#define read_c0_depc() __read_ulong_c0_register($24, 0)
+#define write_c0_depc(val) __write_ulong_c0_register($24, 0, val)
+
+/*
+ * MIPS32 / MIPS64 performance counters
+ */
+#define read_c0_perfctrl0() __read_32bit_c0_register($25, 0)
+#define write_c0_perfctrl0(val) __write_32bit_c0_register($25, 0, val)
+#define read_c0_perfcntr0() __read_32bit_c0_register($25, 1)
+#define write_c0_perfcntr0(val) __write_32bit_c0_register($25, 1, val)
+#define read_c0_perfctrl1() __read_32bit_c0_register($25, 2)
+#define write_c0_perfctrl1(val) __write_32bit_c0_register($25, 2, val)
+#define read_c0_perfcntr1() __read_32bit_c0_register($25, 3)
+#define write_c0_perfcntr1(val) __write_32bit_c0_register($25, 3, val)
+#define read_c0_perfctrl2() __read_32bit_c0_register($25, 4)
+#define write_c0_perfctrl2(val) __write_32bit_c0_register($25, 4, val)
+#define read_c0_perfcntr2() __read_32bit_c0_register($25, 5)
+#define write_c0_perfcntr2(val) __write_32bit_c0_register($25, 5, val)
+#define read_c0_perfctrl3() __read_32bit_c0_register($25, 6)
+#define write_c0_perfctrl3(val) __write_32bit_c0_register($25, 6, val)
+#define read_c0_perfcntr3() __read_32bit_c0_register($25, 7)
+#define write_c0_perfcntr3(val) __write_32bit_c0_register($25, 7, val)
+
+/* RM9000 PerfCount performance counter register */
+#define read_c0_perfcount() __read_64bit_c0_register($25, 0)
+#define write_c0_perfcount(val) __write_64bit_c0_register($25, 0, val)
+
+#define read_c0_ecc() __read_32bit_c0_register($26, 0)
+#define write_c0_ecc(val) __write_32bit_c0_register($26, 0, val)
+
+#define read_c0_derraddr0() __read_ulong_c0_register($26, 1)
+#define write_c0_derraddr0(val) __write_ulong_c0_register($26, 1, val)
+
+#define read_c0_cacheerr() __read_32bit_c0_register($27, 0)
+
+#define read_c0_derraddr1() __read_ulong_c0_register($27, 1)
+#define write_c0_derraddr1(val) __write_ulong_c0_register($27, 1, val)
+
+#define read_c0_taglo() __read_32bit_c0_register($28, 0)
+#define write_c0_taglo(val) __write_32bit_c0_register($28, 0, val)
+
+#define read_c0_dtaglo() __read_32bit_c0_register($28, 2)
+#define write_c0_dtaglo(val) __write_32bit_c0_register($28, 2, val)
+
+#define read_c0_taghi() __read_32bit_c0_register($29, 0)
+#define write_c0_taghi(val) __write_32bit_c0_register($29, 0, val)
+
+#define read_c0_errorepc() __read_ulong_c0_register($30, 0)
+#define write_c0_errorepc(val) __write_ulong_c0_register($30, 0, val)
+
+/* MIPSR2 */
+#define read_c0_hwrena() __read_32bit_c0_register($7, 0)
+#define write_c0_hwrena(val) __write_32bit_c0_register($7, 0, val)
+
+#define read_c0_intctl() __read_32bit_c0_register($12, 1)
+#define write_c0_intctl(val) __write_32bit_c0_register($12, 1, val)
+
+#define read_c0_srsctl() __read_32bit_c0_register($12, 2)
+#define write_c0_srsctl(val) __write_32bit_c0_register($12, 2, val)
+
+#define read_c0_srsmap() __read_32bit_c0_register($12, 3)
+#define write_c0_srsmap(val) __write_32bit_c0_register($12, 3, val)
+
+#define read_c0_ebase() __read_32bit_c0_register($15, 1)
+#define write_c0_ebase(val) __write_32bit_c0_register($15, 1, val)
+
+/*
+ * Macros to access the floating point coprocessor control registers
+ */
+#define read_32bit_cp1_register(source) \
+({ int __res; \
+ __asm__ __volatile__( \
+ ".set\tpush\n\t" \
+ ".set\treorder\n\t" \
+ "cfc1\t%0,"STR(source)"\n\t" \
+ ".set\tpop" \
+ : "=r" (__res)); \
+ __res;})
+
+#define rddsp(mask) \
+({ \
+ unsigned int __res; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # rddsp $1, %x1 \n" \
+ " .word 0x7c000cb8 | (%x1 << 16) \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__res) \
+ : "i" (mask)); \
+ __res; \
+})
+
+#define wrdsp(val, mask) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # wrdsp $1, %x1 \n" \
+ " .word 0x7c2004f8 | (%x1 << 11) \n" \
+ " .set pop \n" \
+ : \
+ : "r" (val), "i" (mask)); \
+} while (0)
+
+#if 0 /* Need DSP ASE capable assembler ... */
+#define mflo0() ({ long mflo0; __asm__("mflo %0, $ac0" : "=r" (mflo0)); mflo0;})
+#define mflo1() ({ long mflo1; __asm__("mflo %0, $ac1" : "=r" (mflo1)); mflo1;})
+#define mflo2() ({ long mflo2; __asm__("mflo %0, $ac2" : "=r" (mflo2)); mflo2;})
+#define mflo3() ({ long mflo3; __asm__("mflo %0, $ac3" : "=r" (mflo3)); mflo3;})
+
+#define mfhi0() ({ long mfhi0; __asm__("mfhi %0, $ac0" : "=r" (mfhi0)); mfhi0;})
+#define mfhi1() ({ long mfhi1; __asm__("mfhi %0, $ac1" : "=r" (mfhi1)); mfhi1;})
+#define mfhi2() ({ long mfhi2; __asm__("mfhi %0, $ac2" : "=r" (mfhi2)); mfhi2;})
+#define mfhi3() ({ long mfhi3; __asm__("mfhi %0, $ac3" : "=r" (mfhi3)); mfhi3;})
+
+#define mtlo0(x) __asm__("mtlo %0, $ac0" ::"r" (x))
+#define mtlo1(x) __asm__("mtlo %0, $ac1" ::"r" (x))
+#define mtlo2(x) __asm__("mtlo %0, $ac2" ::"r" (x))
+#define mtlo3(x) __asm__("mtlo %0, $ac3" ::"r" (x))
+
+#define mthi0(x) __asm__("mthi %0, $ac0" ::"r" (x))
+#define mthi1(x) __asm__("mthi %0, $ac1" ::"r" (x))
+#define mthi2(x) __asm__("mthi %0, $ac2" ::"r" (x))
+#define mthi3(x) __asm__("mthi %0, $ac3" ::"r" (x))
+
+#else
+
+#define mfhi0() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mfhi %0, $ac0 \n" \
+ " .word 0x00000810 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mfhi1() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mfhi %0, $ac1 \n" \
+ " .word 0x00200810 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mfhi2() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mfhi %0, $ac2 \n" \
+ " .word 0x00400810 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mfhi3() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mfhi %0, $ac3 \n" \
+ " .word 0x00600810 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mflo0() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mflo %0, $ac0 \n" \
+ " .word 0x00000812 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mflo1() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mflo %0, $ac1 \n" \
+ " .word 0x00200812 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mflo2() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mflo %0, $ac2 \n" \
+ " .word 0x00400812 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mflo3() \
+({ \
+ unsigned long __treg; \
+ \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " # mflo %0, $ac3 \n" \
+ " .word 0x00600812 \n" \
+ " move %0, $1 \n" \
+ " .set pop \n" \
+ : "=r" (__treg)); \
+ __treg; \
+})
+
+#define mthi0(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mthi $1, $ac0 \n" \
+ " .word 0x00200011 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mthi1(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mthi $1, $ac1 \n" \
+ " .word 0x00200811 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mthi2(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mthi $1, $ac2 \n" \
+ " .word 0x00201011 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mthi3(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mthi $1, $ac3 \n" \
+ " .word 0x00201811 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mtlo0(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mtlo $1, $ac0 \n" \
+ " .word 0x00200013 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mtlo1(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mtlo $1, $ac1 \n" \
+ " .word 0x00200813 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mtlo2(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mtlo $1, $ac2 \n" \
+ " .word 0x00201013 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#define mtlo3(x) \
+do { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " move $1, %0 \n" \
+ " # mtlo $1, $ac3 \n" \
+ " .word 0x00201813 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+} while (0)
+
+#endif
+
+/*
+ * TLB operations.
+ *
+ * It is responsibility of the caller to take care of any TLB hazards.
+ */
+static inline void tlb_probe(void)
+{
+ __asm__ __volatile__(
+ ".set noreorder\n\t"
+ "tlbp\n\t"
+ ".set reorder");
+}
+
+static inline void tlb_read(void)
+{
+#if MIPS34K_MISSED_ITLB_WAR
+ int res = 0;
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " .set noat \n"
+ " .set mips32r2 \n"
+ " .word 0x41610001 # dvpe $1 \n"
+ " move %0, $1 \n"
+ " ehb \n"
+ " .set pop \n"
+ : "=r" (res));
+
+ instruction_hazard();
+#endif
+
+ __asm__ __volatile__(
+ ".set noreorder\n\t"
+ "tlbr\n\t"
+ ".set reorder");
+
+#if MIPS34K_MISSED_ITLB_WAR
+ if ((res & _ULCAST_(1)))
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " .set noat \n"
+ " .set mips32r2 \n"
+ " .word 0x41600021 # evpe \n"
+ " ehb \n"
+ " .set pop \n");
+#endif
+}
+
+static inline void tlb_write_indexed(void)
+{
+ __asm__ __volatile__(
+ ".set noreorder\n\t"
+ "tlbwi\n\t"
+ ".set reorder");
+}
+
+static inline void tlb_write_random(void)
+{
+ __asm__ __volatile__(
+ ".set noreorder\n\t"
+ "tlbwr\n\t"
+ ".set reorder");
+}
+
+/*
+ * Manipulate bits in a c0 register.
+ */
+#ifndef CONFIG_MIPS_MT_SMTC
+/*
+ * SMTC Linux requires shutting-down microthread scheduling
+ * during CP0 register read-modify-write sequences.
+ */
+#define __BUILD_SET_C0(name) \
+static inline unsigned int \
+set_c0_##name(unsigned int set) \
+{ \
+ unsigned int res; \
+ \
+ res = read_c0_##name(); \
+ res |= set; \
+ write_c0_##name(res); \
+ \
+ return res; \
+} \
+ \
+static inline unsigned int \
+clear_c0_##name(unsigned int clear) \
+{ \
+ unsigned int res; \
+ \
+ res = read_c0_##name(); \
+ res &= ~clear; \
+ write_c0_##name(res); \
+ \
+ return res; \
+} \
+ \
+static inline unsigned int \
+change_c0_##name(unsigned int change, unsigned int new) \
+{ \
+ unsigned int res; \
+ \
+ res = read_c0_##name(); \
+ res &= ~change; \
+ res |= (new & change); \
+ write_c0_##name(res); \
+ \
+ return res; \
+}
+
+#else /* SMTC versions that manage MT scheduling */
+
+#include <linux/irqflags.h>
+
+/*
+ * This is a duplicate of dmt() in mipsmtregs.h to avoid problems with
+ * header file recursion.
+ */
+static inline unsigned int __dmt(void)
+{
+ int res;
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set mips32r2 \n"
+ " .set noat \n"
+ " .word 0x41610BC1 # dmt $1 \n"
+ " ehb \n"
+ " move %0, $1 \n"
+ " .set pop \n"
+ : "=r" (res));
+
+ instruction_hazard();
+
+ return res;
+}
+
+#define __VPECONTROL_TE_SHIFT 15
+#define __VPECONTROL_TE (1UL << __VPECONTROL_TE_SHIFT)
+
+#define __EMT_ENABLE __VPECONTROL_TE
+
+static inline void __emt(unsigned int previous)
+{
+ if ((previous & __EMT_ENABLE))
+ __asm__ __volatile__(
+ " .set mips32r2 \n"
+ " .word 0x41600be1 # emt \n"
+ " ehb \n"
+ " .set mips0 \n");
+}
+
+static inline void __ehb(void)
+{
+ __asm__ __volatile__(
+ " .set mips32r2 \n"
+ " ehb \n" " .set mips0 \n");
+}
+
+/*
+ * Note that local_irq_save/restore affect TC-specific IXMT state,
+ * not Status.IE as in non-SMTC kernel.
+ */
+
+#define __BUILD_SET_C0(name) \
+static inline unsigned int \
+set_c0_##name(unsigned int set) \
+{ \
+ unsigned int res; \
+ unsigned int omt; \
+ unsigned long flags; \
+ \
+ local_irq_save(flags); \
+ omt = __dmt(); \
+ res = read_c0_##name(); \
+ res |= set; \
+ write_c0_##name(res); \
+ __emt(omt); \
+ local_irq_restore(flags); \
+ \
+ return res; \
+} \
+ \
+static inline unsigned int \
+clear_c0_##name(unsigned int clear) \
+{ \
+ unsigned int res; \
+ unsigned int omt; \
+ unsigned long flags; \
+ \
+ local_irq_save(flags); \
+ omt = __dmt(); \
+ res = read_c0_##name(); \
+ res &= ~clear; \
+ write_c0_##name(res); \
+ __emt(omt); \
+ local_irq_restore(flags); \
+ \
+ return res; \
+} \
+ \
+static inline unsigned int \
+change_c0_##name(unsigned int change, unsigned int new) \
+{ \
+ unsigned int res; \
+ unsigned int omt; \
+ unsigned long flags; \
+ \
+ local_irq_save(flags); \
+ \
+ omt = __dmt(); \
+ res = read_c0_##name(); \
+ res &= ~change; \
+ res |= (new & change); \
+ write_c0_##name(res); \
+ __emt(omt); \
+ local_irq_restore(flags); \
+ \
+ return res; \
+}
+#endif
+
+__BUILD_SET_C0(status)
+__BUILD_SET_C0(cause)
+__BUILD_SET_C0(config)
+__BUILD_SET_C0(intcontrol)
+__BUILD_SET_C0(intctl)
+__BUILD_SET_C0(srsmap)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_MIPSREGS_H */
diff --git a/arch/mips/include/asm/mman.h b/arch/mips/include/asm/mman.h
new file mode 100644
index 00000000000..e4d6f1fb1cf
--- /dev/null
+++ b/arch/mips/include/asm/mman.h
@@ -0,0 +1,77 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1999, 2002 by Ralf Baechle
+ */
+#ifndef _ASM_MMAN_H
+#define _ASM_MMAN_H
+
+/*
+ * Protections are chosen from these bits, OR'd together. The
+ * implementation does not necessarily support PROT_EXEC or PROT_WRITE
+ * without PROT_READ. The only guarantees are that no writing will be
+ * allowed without PROT_WRITE and no access will be allowed for PROT_NONE.
+ */
+#define PROT_NONE 0x00 /* page can not be accessed */
+#define PROT_READ 0x01 /* page can be read */
+#define PROT_WRITE 0x02 /* page can be written */
+#define PROT_EXEC 0x04 /* page can be executed */
+/* 0x08 reserved for PROT_EXEC_NOFLUSH */
+#define PROT_SEM 0x10 /* page may be used for atomic ops */
+#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */
+
+/*
+ * Flags for mmap
+ */
+#define MAP_SHARED 0x001 /* Share changes */
+#define MAP_PRIVATE 0x002 /* Changes are private */
+#define MAP_TYPE 0x00f /* Mask for type of mapping */
+#define MAP_FIXED 0x010 /* Interpret addr exactly */
+
+/* not used by linux, but here to make sure we don't clash with ABI defines */
+#define MAP_RENAME 0x020 /* Assign page to file */
+#define MAP_AUTOGROW 0x040 /* File may grow by writing */
+#define MAP_LOCAL 0x080 /* Copy on fork/sproc */
+#define MAP_AUTORSRV 0x100 /* Logical swap reserved on demand */
+
+/* These are linux-specific */
+#define MAP_NORESERVE 0x0400 /* don't check for reservations */
+#define MAP_ANONYMOUS 0x0800 /* don't use a file */
+#define MAP_GROWSDOWN 0x1000 /* stack-like segment */
+#define MAP_DENYWRITE 0x2000 /* ETXTBSY */
+#define MAP_EXECUTABLE 0x4000 /* mark it as an executable */
+#define MAP_LOCKED 0x8000 /* pages are locked */
+#define MAP_POPULATE 0x10000 /* populate (prefault) pagetables */
+#define MAP_NONBLOCK 0x20000 /* do not block on IO */
+
+/*
+ * Flags for msync
+ */
+#define MS_ASYNC 0x0001 /* sync memory asynchronously */
+#define MS_INVALIDATE 0x0002 /* invalidate mappings & caches */
+#define MS_SYNC 0x0004 /* synchronous memory sync */
+
+/*
+ * Flags for mlockall
+ */
+#define MCL_CURRENT 1 /* lock all current mappings */
+#define MCL_FUTURE 2 /* lock all future mappings */
+
+#define MADV_NORMAL 0 /* no further special treatment */
+#define MADV_RANDOM 1 /* expect random page references */
+#define MADV_SEQUENTIAL 2 /* expect sequential page references */
+#define MADV_WILLNEED 3 /* will need these pages */
+#define MADV_DONTNEED 4 /* don't need these pages */
+
+/* common parameters: try to keep these consistent across architectures */
+#define MADV_REMOVE 9 /* remove these pages & resources */
+#define MADV_DONTFORK 10 /* don't inherit across fork */
+#define MADV_DOFORK 11 /* do inherit across fork */
+
+/* compatibility flags */
+#define MAP_FILE 0
+
+#endif /* _ASM_MMAN_H */
diff --git a/arch/mips/include/asm/mmu.h b/arch/mips/include/asm/mmu.h
new file mode 100644
index 00000000000..4063edd7962
--- /dev/null
+++ b/arch/mips/include/asm/mmu.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_MMU_H
+#define __ASM_MMU_H
+
+typedef unsigned long mm_context_t[NR_CPUS];
+
+#endif /* __ASM_MMU_H */
diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h
new file mode 100644
index 00000000000..d7f3eb03ad1
--- /dev/null
+++ b/arch/mips/include/asm/mmu_context.h
@@ -0,0 +1,297 @@
+/*
+ * Switch a MMU context.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1997, 1998, 1999 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_MMU_CONTEXT_H
+#define _ASM_MMU_CONTEXT_H
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/mipsmtregs.h>
+#include <asm/smtc.h>
+#endif /* SMTC */
+#include <asm-generic/mm_hooks.h>
+
+/*
+ * For the fast tlb miss handlers, we keep a per cpu array of pointers
+ * to the current pgd for each processor. Also, the proc. id is stuffed
+ * into the context register.
+ */
+extern unsigned long pgd_current[];
+
+#define TLBMISS_HANDLER_SETUP_PGD(pgd) \
+ pgd_current[smp_processor_id()] = (unsigned long)(pgd)
+
+#ifdef CONFIG_32BIT
+#define TLBMISS_HANDLER_SETUP() \
+ write_c0_context((unsigned long) smp_processor_id() << 25); \
+ TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
+#endif
+#ifdef CONFIG_64BIT
+#define TLBMISS_HANDLER_SETUP() \
+ write_c0_context((unsigned long) smp_processor_id() << 26); \
+ TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
+#endif
+
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+
+#define ASID_INC 0x40
+#define ASID_MASK 0xfc0
+
+#elif defined(CONFIG_CPU_R8000)
+
+#define ASID_INC 0x10
+#define ASID_MASK 0xff0
+
+#elif defined(CONFIG_CPU_RM9000)
+
+#define ASID_INC 0x1
+#define ASID_MASK 0xfff
+
+/* SMTC/34K debug hack - but maybe we'll keep it */
+#elif defined(CONFIG_MIPS_MT_SMTC)
+
+#define ASID_INC 0x1
+extern unsigned long smtc_asid_mask;
+#define ASID_MASK (smtc_asid_mask)
+#define HW_ASID_MASK 0xff
+/* End SMTC/34K debug hack */
+#else /* FIXME: not correct for R6000 */
+
+#define ASID_INC 0x1
+#define ASID_MASK 0xff
+
+#endif
+
+#define cpu_context(cpu, mm) ((mm)->context[cpu])
+#define cpu_asid(cpu, mm) (cpu_context((cpu), (mm)) & ASID_MASK)
+#define asid_cache(cpu) (cpu_data[cpu].asid_cache)
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/*
+ * All unused by hardware upper bits will be considered
+ * as a software asid extension.
+ */
+#define ASID_VERSION_MASK ((unsigned long)~(ASID_MASK|(ASID_MASK-1)))
+#define ASID_FIRST_VERSION ((unsigned long)(~ASID_VERSION_MASK) + 1)
+
+#ifndef CONFIG_MIPS_MT_SMTC
+/* Normal, classic MIPS get_new_mmu_context */
+static inline void
+get_new_mmu_context(struct mm_struct *mm, unsigned long cpu)
+{
+ unsigned long asid = asid_cache(cpu);
+
+ if (! ((asid += ASID_INC) & ASID_MASK) ) {
+ if (cpu_has_vtag_icache)
+ flush_icache_all();
+ local_flush_tlb_all(); /* start new asid cycle */
+ if (!asid) /* fix version if needed */
+ asid = ASID_FIRST_VERSION;
+ }
+ cpu_context(cpu, mm) = asid_cache(cpu) = asid;
+}
+
+#else /* CONFIG_MIPS_MT_SMTC */
+
+#define get_new_mmu_context(mm, cpu) smtc_get_new_mmu_context((mm), (cpu))
+
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+/*
+ * Initialize the context related info for a new mm_struct
+ * instance.
+ */
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+ int i;
+
+ for_each_online_cpu(i)
+ cpu_context(i, mm) = 0;
+
+ return 0;
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+ struct task_struct *tsk)
+{
+ unsigned int cpu = smp_processor_id();
+ unsigned long flags;
+#ifdef CONFIG_MIPS_MT_SMTC
+ unsigned long oldasid;
+ unsigned long mtflags;
+ int mytlb = (smtc_status & SMTC_TLB_SHARED) ? 0 : cpu_data[cpu].vpe_id;
+ local_irq_save(flags);
+ mtflags = dvpe();
+#else /* Not SMTC */
+ local_irq_save(flags);
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+ /* Check if our ASID is of an older version and thus invalid */
+ if ((cpu_context(cpu, next) ^ asid_cache(cpu)) & ASID_VERSION_MASK)
+ get_new_mmu_context(next, cpu);
+#ifdef CONFIG_MIPS_MT_SMTC
+ /*
+ * If the EntryHi ASID being replaced happens to be
+ * the value flagged at ASID recycling time as having
+ * an extended life, clear the bit showing it being
+ * in use by this "CPU", and if that's the last bit,
+ * free up the ASID value for use and flush any old
+ * instances of it from the TLB.
+ */
+ oldasid = (read_c0_entryhi() & ASID_MASK);
+ if(smtc_live_asid[mytlb][oldasid]) {
+ smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu);
+ if(smtc_live_asid[mytlb][oldasid] == 0)
+ smtc_flush_tlb_asid(oldasid);
+ }
+ /*
+ * Tread softly on EntryHi, and so long as we support
+ * having ASID_MASK smaller than the hardware maximum,
+ * make sure no "soft" bits become "hard"...
+ */
+ write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK)
+ | (cpu_context(cpu, next) & ASID_MASK));
+ ehb(); /* Make sure it propagates to TCStatus */
+ evpe(mtflags);
+#else
+ write_c0_entryhi(cpu_context(cpu, next));
+#endif /* CONFIG_MIPS_MT_SMTC */
+ TLBMISS_HANDLER_SETUP_PGD(next->pgd);
+
+ /*
+ * Mark current->active_mm as not "active" anymore.
+ * We don't want to mislead possible IPI tlb flush routines.
+ */
+ cpu_clear(cpu, prev->cpu_vm_mask);
+ cpu_set(cpu, next->cpu_vm_mask);
+
+ local_irq_restore(flags);
+}
+
+/*
+ * Destroy context related info for an mm_struct that is about
+ * to be put to rest.
+ */
+static inline void destroy_context(struct mm_struct *mm)
+{
+}
+
+#define deactivate_mm(tsk, mm) do { } while (0)
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+static inline void
+activate_mm(struct mm_struct *prev, struct mm_struct *next)
+{
+ unsigned long flags;
+ unsigned int cpu = smp_processor_id();
+
+#ifdef CONFIG_MIPS_MT_SMTC
+ unsigned long oldasid;
+ unsigned long mtflags;
+ int mytlb = (smtc_status & SMTC_TLB_SHARED) ? 0 : cpu_data[cpu].vpe_id;
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+ local_irq_save(flags);
+
+ /* Unconditionally get a new ASID. */
+ get_new_mmu_context(next, cpu);
+
+#ifdef CONFIG_MIPS_MT_SMTC
+ /* See comments for similar code above */
+ mtflags = dvpe();
+ oldasid = read_c0_entryhi() & ASID_MASK;
+ if(smtc_live_asid[mytlb][oldasid]) {
+ smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu);
+ if(smtc_live_asid[mytlb][oldasid] == 0)
+ smtc_flush_tlb_asid(oldasid);
+ }
+ /* See comments for similar code above */
+ write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) |
+ (cpu_context(cpu, next) & ASID_MASK));
+ ehb(); /* Make sure it propagates to TCStatus */
+ evpe(mtflags);
+#else
+ write_c0_entryhi(cpu_context(cpu, next));
+#endif /* CONFIG_MIPS_MT_SMTC */
+ TLBMISS_HANDLER_SETUP_PGD(next->pgd);
+
+ /* mark mmu ownership change */
+ cpu_clear(cpu, prev->cpu_vm_mask);
+ cpu_set(cpu, next->cpu_vm_mask);
+
+ local_irq_restore(flags);
+}
+
+/*
+ * If mm is currently active_mm, we can't really drop it. Instead,
+ * we will get a new one for it.
+ */
+static inline void
+drop_mmu_context(struct mm_struct *mm, unsigned cpu)
+{
+ unsigned long flags;
+#ifdef CONFIG_MIPS_MT_SMTC
+ unsigned long oldasid;
+ /* Can't use spinlock because called from TLB flush within DVPE */
+ unsigned int prevvpe;
+ int mytlb = (smtc_status & SMTC_TLB_SHARED) ? 0 : cpu_data[cpu].vpe_id;
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+ local_irq_save(flags);
+
+ if (cpu_isset(cpu, mm->cpu_vm_mask)) {
+ get_new_mmu_context(mm, cpu);
+#ifdef CONFIG_MIPS_MT_SMTC
+ /* See comments for similar code above */
+ prevvpe = dvpe();
+ oldasid = (read_c0_entryhi() & ASID_MASK);
+ if (smtc_live_asid[mytlb][oldasid]) {
+ smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu);
+ if(smtc_live_asid[mytlb][oldasid] == 0)
+ smtc_flush_tlb_asid(oldasid);
+ }
+ /* See comments for similar code above */
+ write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK)
+ | cpu_asid(cpu, mm));
+ ehb(); /* Make sure it propagates to TCStatus */
+ evpe(prevvpe);
+#else /* not CONFIG_MIPS_MT_SMTC */
+ write_c0_entryhi(cpu_asid(cpu, mm));
+#endif /* CONFIG_MIPS_MT_SMTC */
+ } else {
+ /* will get a new context next time */
+#ifndef CONFIG_MIPS_MT_SMTC
+ cpu_context(cpu, mm) = 0;
+#else /* SMTC */
+ int i;
+
+ /* SMTC shares the TLB (and ASIDs) across VPEs */
+ for_each_online_cpu(i) {
+ if((smtc_status & SMTC_TLB_SHARED)
+ || (cpu_data[i].vpe_id == cpu_data[cpu].vpe_id))
+ cpu_context(i, mm) = 0;
+ }
+#endif /* CONFIG_MIPS_MT_SMTC */
+ }
+ local_irq_restore(flags);
+}
+
+#endif /* _ASM_MMU_CONTEXT_H */
diff --git a/arch/mips/include/asm/mmzone.h b/arch/mips/include/asm/mmzone.h
new file mode 100644
index 00000000000..f53ec54c92f
--- /dev/null
+++ b/arch/mips/include/asm/mmzone.h
@@ -0,0 +1,17 @@
+/*
+ * Written by Kanoj Sarcar (kanoj@sgi.com) Aug 99
+ * Rewritten for Linux 2.6 by Christoph Hellwig (hch@lst.de) Jan 2004
+ */
+#ifndef _ASM_MMZONE_H_
+#define _ASM_MMZONE_H_
+
+#include <asm/page.h>
+#include <mmzone.h>
+
+#ifdef CONFIG_DISCONTIGMEM
+
+#define pfn_to_nid(pfn) pa_to_nid((pfn) << PAGE_SHIFT)
+
+#endif /* CONFIG_DISCONTIGMEM */
+
+#endif /* _ASM_MMZONE_H_ */
diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h
new file mode 100644
index 00000000000..de6d09ebbd8
--- /dev/null
+++ b/arch/mips/include/asm/module.h
@@ -0,0 +1,136 @@
+#ifndef _ASM_MODULE_H
+#define _ASM_MODULE_H
+
+#include <linux/list.h>
+#include <asm/uaccess.h>
+
+struct mod_arch_specific {
+ /* Data Bus Error exception tables */
+ struct list_head dbe_list;
+ const struct exception_table_entry *dbe_start;
+ const struct exception_table_entry *dbe_end;
+};
+
+typedef uint8_t Elf64_Byte; /* Type for a 8-bit quantity. */
+
+typedef struct {
+ Elf64_Addr r_offset; /* Address of relocation. */
+ Elf64_Word r_sym; /* Symbol index. */
+ Elf64_Byte r_ssym; /* Special symbol. */
+ Elf64_Byte r_type3; /* Third relocation. */
+ Elf64_Byte r_type2; /* Second relocation. */
+ Elf64_Byte r_type; /* First relocation. */
+} Elf64_Mips_Rel;
+
+typedef struct {
+ Elf64_Addr r_offset; /* Address of relocation. */
+ Elf64_Word r_sym; /* Symbol index. */
+ Elf64_Byte r_ssym; /* Special symbol. */
+ Elf64_Byte r_type3; /* Third relocation. */
+ Elf64_Byte r_type2; /* Second relocation. */
+ Elf64_Byte r_type; /* First relocation. */
+ Elf64_Sxword r_addend; /* Addend. */
+} Elf64_Mips_Rela;
+
+#ifdef CONFIG_32BIT
+
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+#define Elf_Addr Elf32_Addr
+
+#define Elf_Mips_Rel Elf32_Rel
+#define Elf_Mips_Rela Elf32_Rela
+
+#define ELF_MIPS_R_SYM(rel) ELF32_R_SYM(rel.r_info)
+#define ELF_MIPS_R_TYPE(rel) ELF32_R_TYPE(rel.r_info)
+
+#endif
+
+#ifdef CONFIG_64BIT
+
+#define Elf_Shdr Elf64_Shdr
+#define Elf_Sym Elf64_Sym
+#define Elf_Ehdr Elf64_Ehdr
+#define Elf_Addr Elf64_Addr
+
+#define Elf_Mips_Rel Elf64_Mips_Rel
+#define Elf_Mips_Rela Elf64_Mips_Rela
+
+#define ELF_MIPS_R_SYM(rel) (rel.r_sym)
+#define ELF_MIPS_R_TYPE(rel) (rel.r_type)
+
+#endif
+
+#ifdef CONFIG_MODULES
+/* Given an address, look for it in the exception tables. */
+const struct exception_table_entry*search_module_dbetables(unsigned long addr);
+#else
+/* Given an address, look for it in the exception tables. */
+static inline const struct exception_table_entry *
+search_module_dbetables(unsigned long addr)
+{
+ return NULL;
+}
+#endif
+
+#ifdef CONFIG_CPU_MIPS32_R1
+#define MODULE_PROC_FAMILY "MIPS32_R1 "
+#elif defined CONFIG_CPU_MIPS32_R2
+#define MODULE_PROC_FAMILY "MIPS32_R2 "
+#elif defined CONFIG_CPU_MIPS64_R1
+#define MODULE_PROC_FAMILY "MIPS64_R1 "
+#elif defined CONFIG_CPU_MIPS64_R2
+#define MODULE_PROC_FAMILY "MIPS64_R2 "
+#elif defined CONFIG_CPU_R3000
+#define MODULE_PROC_FAMILY "R3000 "
+#elif defined CONFIG_CPU_TX39XX
+#define MODULE_PROC_FAMILY "TX39XX "
+#elif defined CONFIG_CPU_VR41XX
+#define MODULE_PROC_FAMILY "VR41XX "
+#elif defined CONFIG_CPU_R4300
+#define MODULE_PROC_FAMILY "R4300 "
+#elif defined CONFIG_CPU_R4X00
+#define MODULE_PROC_FAMILY "R4X00 "
+#elif defined CONFIG_CPU_TX49XX
+#define MODULE_PROC_FAMILY "TX49XX "
+#elif defined CONFIG_CPU_R5000
+#define MODULE_PROC_FAMILY "R5000 "
+#elif defined CONFIG_CPU_R5432
+#define MODULE_PROC_FAMILY "R5432 "
+#elif defined CONFIG_CPU_R6000
+#define MODULE_PROC_FAMILY "R6000 "
+#elif defined CONFIG_CPU_NEVADA
+#define MODULE_PROC_FAMILY "NEVADA "
+#elif defined CONFIG_CPU_R8000
+#define MODULE_PROC_FAMILY "R8000 "
+#elif defined CONFIG_CPU_R10000
+#define MODULE_PROC_FAMILY "R10000 "
+#elif defined CONFIG_CPU_RM7000
+#define MODULE_PROC_FAMILY "RM7000 "
+#elif defined CONFIG_CPU_RM9000
+#define MODULE_PROC_FAMILY "RM9000 "
+#elif defined CONFIG_CPU_SB1
+#define MODULE_PROC_FAMILY "SB1 "
+#elif defined CONFIG_CPU_LOONGSON2
+#define MODULE_PROC_FAMILY "LOONGSON2 "
+#else
+#error MODULE_PROC_FAMILY undefined for your processor configuration
+#endif
+
+#ifdef CONFIG_32BIT
+#define MODULE_KERNEL_TYPE "32BIT "
+#elif defined CONFIG_64BIT
+#define MODULE_KERNEL_TYPE "64BIT "
+#endif
+
+#ifdef CONFIG_MIPS_MT_SMTC
+#define MODULE_KERNEL_SMTC "MT_SMTC "
+#else
+#define MODULE_KERNEL_SMTC ""
+#endif
+
+#define MODULE_ARCH_VERMAGIC \
+ MODULE_PROC_FAMILY MODULE_KERNEL_TYPE MODULE_KERNEL_SMTC
+
+#endif /* _ASM_MODULE_H */
diff --git a/arch/mips/include/asm/msc01_ic.h b/arch/mips/include/asm/msc01_ic.h
new file mode 100644
index 00000000000..7989b9ffc1d
--- /dev/null
+++ b/arch/mips/include/asm/msc01_ic.h
@@ -0,0 +1,148 @@
+/*
+ * PCI Register definitions for the MIPS System Controller.
+ *
+ * Copyright (C) 2004 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __ASM_MIPS_BOARDS_MSC01_IC_H
+#define __ASM_MIPS_BOARDS_MSC01_IC_H
+
+/*****************************************************************************
+ * Register offset addresses
+ *****************************************************************************/
+
+#define MSC01_IC_RST_OFS 0x00008 /* Software reset */
+#define MSC01_IC_ENAL_OFS 0x00100 /* Int_in enable mask 31:0 */
+#define MSC01_IC_ENAH_OFS 0x00108 /* Int_in enable mask 63:32 */
+#define MSC01_IC_DISL_OFS 0x00120 /* Int_in disable mask 31:0 */
+#define MSC01_IC_DISH_OFS 0x00128 /* Int_in disable mask 63:32 */
+#define MSC01_IC_ISBL_OFS 0x00140 /* Raw int_in 31:0 */
+#define MSC01_IC_ISBH_OFS 0x00148 /* Raw int_in 63:32 */
+#define MSC01_IC_ISAL_OFS 0x00160 /* Masked int_in 31:0 */
+#define MSC01_IC_ISAH_OFS 0x00168 /* Masked int_in 63:32 */
+#define MSC01_IC_LVL_OFS 0x00180 /* Disable priority int_out */
+#define MSC01_IC_RAMW_OFS 0x00180 /* Shadow set RAM (EI) */
+#define MSC01_IC_OSB_OFS 0x00188 /* Raw int_out */
+#define MSC01_IC_OSA_OFS 0x00190 /* Masked int_out */
+#define MSC01_IC_GENA_OFS 0x00198 /* Global HW int enable */
+#define MSC01_IC_BASE_OFS 0x001a0 /* Base address of IC_VEC */
+#define MSC01_IC_VEC_OFS 0x001b0 /* Active int's vector address */
+#define MSC01_IC_EOI_OFS 0x001c0 /* Enable lower level ints */
+#define MSC01_IC_CFG_OFS 0x001c8 /* Configuration register */
+#define MSC01_IC_TRLD_OFS 0x001d0 /* Interval timer reload val */
+#define MSC01_IC_TVAL_OFS 0x001e0 /* Interval timer current val */
+#define MSC01_IC_TCFG_OFS 0x001f0 /* Interval timer config */
+#define MSC01_IC_SUP_OFS 0x00200 /* Set up int_in line 0 */
+#define MSC01_IC_ENA_OFS 0x00800 /* Int_in enable mask 63:0 */
+#define MSC01_IC_DIS_OFS 0x00820 /* Int_in disable mask 63:0 */
+#define MSC01_IC_ISB_OFS 0x00840 /* Raw int_in 63:0 */
+#define MSC01_IC_ISA_OFS 0x00860 /* Masked int_in 63:0 */
+
+/*****************************************************************************
+ * Register field encodings
+ *****************************************************************************/
+
+#define MSC01_IC_RST_RST_SHF 0
+#define MSC01_IC_RST_RST_MSK 0x00000001
+#define MSC01_IC_RST_RST_BIT MSC01_IC_RST_RST_MSK
+#define MSC01_IC_LVL_LVL_SHF 0
+#define MSC01_IC_LVL_LVL_MSK 0x000000ff
+#define MSC01_IC_LVL_SPUR_SHF 16
+#define MSC01_IC_LVL_SPUR_MSK 0x00010000
+#define MSC01_IC_LVL_SPUR_BIT MSC01_IC_LVL_SPUR_MSK
+#define MSC01_IC_RAMW_RIPL_SHF 0
+#define MSC01_IC_RAMW_RIPL_MSK 0x0000003f
+#define MSC01_IC_RAMW_DATA_SHF 6
+#define MSC01_IC_RAMW_DATA_MSK 0x00000fc0
+#define MSC01_IC_RAMW_ADDR_SHF 25
+#define MSC01_IC_RAMW_ADDR_MSK 0x7e000000
+#define MSC01_IC_RAMW_READ_SHF 31
+#define MSC01_IC_RAMW_READ_MSK 0x80000000
+#define MSC01_IC_RAMW_READ_BIT MSC01_IC_RAMW_READ_MSK
+#define MSC01_IC_OSB_OSB_SHF 0
+#define MSC01_IC_OSB_OSB_MSK 0x000000ff
+#define MSC01_IC_OSA_OSA_SHF 0
+#define MSC01_IC_OSA_OSA_MSK 0x000000ff
+#define MSC01_IC_GENA_GENA_SHF 0
+#define MSC01_IC_GENA_GENA_MSK 0x00000001
+#define MSC01_IC_GENA_GENA_BIT MSC01_IC_GENA_GENA_MSK
+#define MSC01_IC_CFG_DIS_SHF 0
+#define MSC01_IC_CFG_DIS_MSK 0x00000001
+#define MSC01_IC_CFG_DIS_BIT MSC01_IC_CFG_DIS_MSK
+#define MSC01_IC_CFG_SHFT_SHF 8
+#define MSC01_IC_CFG_SHFT_MSK 0x00000f00
+#define MSC01_IC_TCFG_ENA_SHF 0
+#define MSC01_IC_TCFG_ENA_MSK 0x00000001
+#define MSC01_IC_TCFG_ENA_BIT MSC01_IC_TCFG_ENA_MSK
+#define MSC01_IC_TCFG_INT_SHF 8
+#define MSC01_IC_TCFG_INT_MSK 0x00000100
+#define MSC01_IC_TCFG_INT_BIT MSC01_IC_TCFG_INT_MSK
+#define MSC01_IC_TCFG_EDGE_SHF 16
+#define MSC01_IC_TCFG_EDGE_MSK 0x00010000
+#define MSC01_IC_TCFG_EDGE_BIT MSC01_IC_TCFG_EDGE_MSK
+#define MSC01_IC_SUP_PRI_SHF 0
+#define MSC01_IC_SUP_PRI_MSK 0x00000007
+#define MSC01_IC_SUP_EDGE_SHF 8
+#define MSC01_IC_SUP_EDGE_MSK 0x00000100
+#define MSC01_IC_SUP_EDGE_BIT MSC01_IC_SUP_EDGE_MSK
+#define MSC01_IC_SUP_STEP 8
+
+/*
+ * MIPS System controller interrupt register base.
+ *
+ */
+
+/*****************************************************************************
+ * Absolute register addresses
+ *****************************************************************************/
+
+#define MSC01_IC_RST (MSC01_IC_REG_BASE + MSC01_IC_RST_OFS)
+#define MSC01_IC_ENAL (MSC01_IC_REG_BASE + MSC01_IC_ENAL_OFS)
+#define MSC01_IC_ENAH (MSC01_IC_REG_BASE + MSC01_IC_ENAH_OFS)
+#define MSC01_IC_DISL (MSC01_IC_REG_BASE + MSC01_IC_DISL_OFS)
+#define MSC01_IC_DISH (MSC01_IC_REG_BASE + MSC01_IC_DISH_OFS)
+#define MSC01_IC_ISBL (MSC01_IC_REG_BASE + MSC01_IC_ISBL_OFS)
+#define MSC01_IC_ISBH (MSC01_IC_REG_BASE + MSC01_IC_ISBH_OFS)
+#define MSC01_IC_ISAL (MSC01_IC_REG_BASE + MSC01_IC_ISAL_OFS)
+#define MSC01_IC_ISAH (MSC01_IC_REG_BASE + MSC01_IC_ISAH_OFS)
+#define MSC01_IC_LVL (MSC01_IC_REG_BASE + MSC01_IC_LVL_OFS)
+#define MSC01_IC_RAMW (MSC01_IC_REG_BASE + MSC01_IC_RAMW_OFS)
+#define MSC01_IC_OSB (MSC01_IC_REG_BASE + MSC01_IC_OSB_OFS)
+#define MSC01_IC_OSA (MSC01_IC_REG_BASE + MSC01_IC_OSA_OFS)
+#define MSC01_IC_GENA (MSC01_IC_REG_BASE + MSC01_IC_GENA_OFS)
+#define MSC01_IC_BASE (MSC01_IC_REG_BASE + MSC01_IC_BASE_OFS)
+#define MSC01_IC_VEC (MSC01_IC_REG_BASE + MSC01_IC_VEC_OFS)
+#define MSC01_IC_EOI (MSC01_IC_REG_BASE + MSC01_IC_EOI_OFS)
+#define MSC01_IC_CFG (MSC01_IC_REG_BASE + MSC01_IC_CFG_OFS)
+#define MSC01_IC_TRLD (MSC01_IC_REG_BASE + MSC01_IC_TRLD_OFS)
+#define MSC01_IC_TVAL (MSC01_IC_REG_BASE + MSC01_IC_TVAL_OFS)
+#define MSC01_IC_TCFG (MSC01_IC_REG_BASE + MSC01_IC_TCFG_OFS)
+#define MSC01_IC_SUP (MSC01_IC_REG_BASE + MSC01_IC_SUP_OFS)
+#define MSC01_IC_ENA (MSC01_IC_REG_BASE + MSC01_IC_ENA_OFS)
+#define MSC01_IC_DIS (MSC01_IC_REG_BASE + MSC01_IC_DIS_OFS)
+#define MSC01_IC_ISB (MSC01_IC_REG_BASE + MSC01_IC_ISB_OFS)
+#define MSC01_IC_ISA (MSC01_IC_REG_BASE + MSC01_IC_ISA_OFS)
+
+/*
+ * Soc-it interrupts are configurable.
+ * Every board describes its IRQ mapping with this table.
+ */
+typedef struct msc_irqmap {
+ int im_irq;
+ int im_type;
+ int im_lvl;
+} msc_irqmap_t;
+
+/* im_type */
+#define MSC01_IRQ_LEVEL 0
+#define MSC01_IRQ_EDGE 1
+
+extern void __init init_msc_irqs(unsigned long icubase, unsigned int base, msc_irqmap_t *imp, int nirq);
+extern void ll_msc_irq(void);
+
+#endif /* __ASM_MIPS_BOARDS_MSC01_IC_H */
+
diff --git a/arch/mips/include/asm/msgbuf.h b/arch/mips/include/asm/msgbuf.h
new file mode 100644
index 00000000000..0d6c7f14de3
--- /dev/null
+++ b/arch/mips/include/asm/msgbuf.h
@@ -0,0 +1,47 @@
+#ifndef _ASM_MSGBUF_H
+#define _ASM_MSGBUF_H
+
+
+/*
+ * The msqid64_ds structure for the MIPS architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - extension of time_t to 64-bit on 32-bitsystem to solve the y2038 problem
+ * - 2 miscellaneous unsigned long values
+ */
+
+struct msqid64_ds {
+ struct ipc64_perm msg_perm;
+#if defined(CONFIG_32BIT) && !defined(CONFIG_CPU_LITTLE_ENDIAN)
+ unsigned long __unused1;
+#endif
+ __kernel_time_t msg_stime; /* last msgsnd time */
+#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_LITTLE_ENDIAN)
+ unsigned long __unused1;
+#endif
+#if defined(CONFIG_32BIT) && !defined(CONFIG_CPU_LITTLE_ENDIAN)
+ unsigned long __unused2;
+#endif
+ __kernel_time_t msg_rtime; /* last msgrcv time */
+#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_LITTLE_ENDIAN)
+ unsigned long __unused2;
+#endif
+#if defined(CONFIG_32BIT) && !defined(CONFIG_CPU_LITTLE_ENDIAN)
+ unsigned long __unused3;
+#endif
+ __kernel_time_t msg_ctime; /* last change time */
+#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_LITTLE_ENDIAN)
+ unsigned long __unused3;
+#endif
+ unsigned long msg_cbytes; /* current number of bytes on queue */
+ unsigned long msg_qnum; /* number of messages in queue */
+ unsigned long msg_qbytes; /* max number of bytes on queue */
+ __kernel_pid_t msg_lspid; /* pid of last msgsnd */
+ __kernel_pid_t msg_lrpid; /* last receive pid */
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+#endif /* _ASM_MSGBUF_H */
diff --git a/arch/mips/include/asm/mutex.h b/arch/mips/include/asm/mutex.h
new file mode 100644
index 00000000000..458c1f7fbc1
--- /dev/null
+++ b/arch/mips/include/asm/mutex.h
@@ -0,0 +1,9 @@
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
diff --git a/arch/mips/include/asm/nile4.h b/arch/mips/include/asm/nile4.h
new file mode 100644
index 00000000000..c3ca959aa4d
--- /dev/null
+++ b/arch/mips/include/asm/nile4.h
@@ -0,0 +1,310 @@
+/*
+ * asm-mips/nile4.h -- NEC Vrc-5074 Nile 4 definitions
+ *
+ * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
+ * Sony Software Development Center Europe (SDCE), Brussels
+ *
+ * This file is based on the following documentation:
+ *
+ * NEC Vrc 5074 System Controller Data Sheet, June 1998
+ */
+
+#ifndef _ASM_NILE4_H
+#define _ASM_NILE4_H
+
+#define NILE4_BASE 0xbfa00000
+#define NILE4_SIZE 0x00200000 /* 2 MB */
+
+
+ /*
+ * Physical Device Address Registers (PDARs)
+ */
+
+#define NILE4_SDRAM0 0x0000 /* SDRAM Bank 0 [R/W] */
+#define NILE4_SDRAM1 0x0008 /* SDRAM Bank 1 [R/W] */
+#define NILE4_DCS2 0x0010 /* Device Chip-Select 2 [R/W] */
+#define NILE4_DCS3 0x0018 /* Device Chip-Select 3 [R/W] */
+#define NILE4_DCS4 0x0020 /* Device Chip-Select 4 [R/W] */
+#define NILE4_DCS5 0x0028 /* Device Chip-Select 5 [R/W] */
+#define NILE4_DCS6 0x0030 /* Device Chip-Select 6 [R/W] */
+#define NILE4_DCS7 0x0038 /* Device Chip-Select 7 [R/W] */
+#define NILE4_DCS8 0x0040 /* Device Chip-Select 8 [R/W] */
+#define NILE4_PCIW0 0x0060 /* PCI Address Window 0 [R/W] */
+#define NILE4_PCIW1 0x0068 /* PCI Address Window 1 [R/W] */
+#define NILE4_INTCS 0x0070 /* Controller Internal Registers and Devices */
+ /* [R/W] */
+#define NILE4_BOOTCS 0x0078 /* Boot ROM Chip-Select [R/W] */
+
+
+ /*
+ * CPU Interface Registers
+ */
+
+#define NILE4_CPUSTAT 0x0080 /* CPU Status [R/W] */
+#define NILE4_INTCTRL 0x0088 /* Interrupt Control [R/W] */
+#define NILE4_INTSTAT0 0x0090 /* Interrupt Status 0 [R] */
+#define NILE4_INTSTAT1 0x0098 /* Interrupt Status 1 and CPU Interrupt */
+ /* Enable [R/W] */
+#define NILE4_INTCLR 0x00A0 /* Interrupt Clear [R/W] */
+#define NILE4_INTPPES 0x00A8 /* PCI Interrupt Control [R/W] */
+
+
+ /*
+ * Memory-Interface Registers
+ */
+
+#define NILE4_MEMCTRL 0x00C0 /* Memory Control */
+#define NILE4_ACSTIME 0x00C8 /* Memory Access Timing [R/W] */
+#define NILE4_CHKERR 0x00D0 /* Memory Check Error Status [R] */
+
+
+ /*
+ * PCI-Bus Registers
+ */
+
+#define NILE4_PCICTRL 0x00E0 /* PCI Control [R/W] */
+#define NILE4_PCIARB 0x00E8 /* PCI Arbiter [R/W] */
+#define NILE4_PCIINIT0 0x00F0 /* PCI Master (Initiator) 0 [R/W] */
+#define NILE4_PCIINIT1 0x00F8 /* PCI Master (Initiator) 1 [R/W] */
+#define NILE4_PCIERR 0x00B8 /* PCI Error [R/W] */
+
+
+ /*
+ * Local-Bus Registers
+ */
+
+#define NILE4_LCNFG 0x0100 /* Local Bus Configuration [R/W] */
+#define NILE4_LCST2 0x0110 /* Local Bus Chip-Select Timing 2 [R/W] */
+#define NILE4_LCST3 0x0118 /* Local Bus Chip-Select Timing 3 [R/W] */
+#define NILE4_LCST4 0x0120 /* Local Bus Chip-Select Timing 4 [R/W] */
+#define NILE4_LCST5 0x0128 /* Local Bus Chip-Select Timing 5 [R/W] */
+#define NILE4_LCST6 0x0130 /* Local Bus Chip-Select Timing 6 [R/W] */
+#define NILE4_LCST7 0x0138 /* Local Bus Chip-Select Timing 7 [R/W] */
+#define NILE4_LCST8 0x0140 /* Local Bus Chip-Select Timing 8 [R/W] */
+#define NILE4_DCSFN 0x0150 /* Device Chip-Select Muxing and Output */
+ /* Enables [R/W] */
+#define NILE4_DCSIO 0x0158 /* Device Chip-Selects As I/O Bits [R/W] */
+#define NILE4_BCST 0x0178 /* Local Boot Chip-Select Timing [R/W] */
+
+
+ /*
+ * DMA Registers
+ */
+
+#define NILE4_DMACTRL0 0x0180 /* DMA Control 0 [R/W] */
+#define NILE4_DMASRCA0 0x0188 /* DMA Source Address 0 [R/W] */
+#define NILE4_DMADESA0 0x0190 /* DMA Destination Address 0 [R/W] */
+#define NILE4_DMACTRL1 0x0198 /* DMA Control 1 [R/W] */
+#define NILE4_DMASRCA1 0x01A0 /* DMA Source Address 1 [R/W] */
+#define NILE4_DMADESA1 0x01A8 /* DMA Destination Address 1 [R/W] */
+
+
+ /*
+ * Timer Registers
+ */
+
+#define NILE4_T0CTRL 0x01C0 /* SDRAM Refresh Control [R/W] */
+#define NILE4_T0CNTR 0x01C8 /* SDRAM Refresh Counter [R/W] */
+#define NILE4_T1CTRL 0x01D0 /* CPU-Bus Read Time-Out Control [R/W] */
+#define NILE4_T1CNTR 0x01D8 /* CPU-Bus Read Time-Out Counter [R/W] */
+#define NILE4_T2CTRL 0x01E0 /* General-Purpose Timer Control [R/W] */
+#define NILE4_T2CNTR 0x01E8 /* General-Purpose Timer Counter [R/W] */
+#define NILE4_T3CTRL 0x01F0 /* Watchdog Timer Control [R/W] */
+#define NILE4_T3CNTR 0x01F8 /* Watchdog Timer Counter [R/W] */
+
+
+ /*
+ * PCI Configuration Space Registers
+ */
+
+#define NILE4_PCI_BASE 0x0200
+
+#define NILE4_VID 0x0200 /* PCI Vendor ID [R] */
+#define NILE4_DID 0x0202 /* PCI Device ID [R] */
+#define NILE4_PCICMD 0x0204 /* PCI Command [R/W] */
+#define NILE4_PCISTS 0x0206 /* PCI Status [R/W] */
+#define NILE4_REVID 0x0208 /* PCI Revision ID [R] */
+#define NILE4_CLASS 0x0209 /* PCI Class Code [R] */
+#define NILE4_CLSIZ 0x020C /* PCI Cache Line Size [R/W] */
+#define NILE4_MLTIM 0x020D /* PCI Latency Timer [R/W] */
+#define NILE4_HTYPE 0x020E /* PCI Header Type [R] */
+#define NILE4_BIST 0x020F /* BIST [R] (unimplemented) */
+#define NILE4_BARC 0x0210 /* PCI Base Address Register Control [R/W] */
+#define NILE4_BAR0 0x0218 /* PCI Base Address Register 0 [R/W] */
+#define NILE4_BAR1 0x0220 /* PCI Base Address Register 1 [R/W] */
+#define NILE4_CIS 0x0228 /* PCI Cardbus CIS Pointer [R] */
+ /* (unimplemented) */
+#define NILE4_SSVID 0x022C /* PCI Sub-System Vendor ID [R/W] */
+#define NILE4_SSID 0x022E /* PCI Sub-System ID [R/W] */
+#define NILE4_ROM 0x0230 /* Expansion ROM Base Address [R] */
+ /* (unimplemented) */
+#define NILE4_INTLIN 0x023C /* PCI Interrupt Line [R/W] */
+#define NILE4_INTPIN 0x023D /* PCI Interrupt Pin [R] */
+#define NILE4_MINGNT 0x023E /* PCI Min_Gnt [R] (unimplemented) */
+#define NILE4_MAXLAT 0x023F /* PCI Max_Lat [R] (unimplemented) */
+#define NILE4_BAR2 0x0240 /* PCI Base Address Register 2 [R/W] */
+#define NILE4_BAR3 0x0248 /* PCI Base Address Register 3 [R/W] */
+#define NILE4_BAR4 0x0250 /* PCI Base Address Register 4 [R/W] */
+#define NILE4_BAR5 0x0258 /* PCI Base Address Register 5 [R/W] */
+#define NILE4_BAR6 0x0260 /* PCI Base Address Register 6 [R/W] */
+#define NILE4_BAR7 0x0268 /* PCI Base Address Register 7 [R/W] */
+#define NILE4_BAR8 0x0270 /* PCI Base Address Register 8 [R/W] */
+#define NILE4_BARB 0x0278 /* PCI Base Address Register BOOT [R/W] */
+
+
+ /*
+ * Serial-Port Registers
+ */
+
+#define NILE4_UART_BASE 0x0300
+
+#define NILE4_UARTRBR 0x0300 /* UART Receiver Data Buffer [R] */
+#define NILE4_UARTTHR 0x0300 /* UART Transmitter Data Holding [W] */
+#define NILE4_UARTIER 0x0308 /* UART Interrupt Enable [R/W] */
+#define NILE4_UARTDLL 0x0300 /* UART Divisor Latch LSB [R/W] */
+#define NILE4_UARTDLM 0x0308 /* UART Divisor Latch MSB [R/W] */
+#define NILE4_UARTIIR 0x0310 /* UART Interrupt ID [R] */
+#define NILE4_UARTFCR 0x0310 /* UART FIFO Control [W] */
+#define NILE4_UARTLCR 0x0318 /* UART Line Control [R/W] */
+#define NILE4_UARTMCR 0x0320 /* UART Modem Control [R/W] */
+#define NILE4_UARTLSR 0x0328 /* UART Line Status [R/W] */
+#define NILE4_UARTMSR 0x0330 /* UART Modem Status [R/W] */
+#define NILE4_UARTSCR 0x0338 /* UART Scratch [R/W] */
+
+#define NILE4_UART_BASE_BAUD 520833 /* 100 MHz / 12 / 16 */
+
+
+ /*
+ * Interrupt Lines
+ */
+
+#define NILE4_INT_CPCE 0 /* CPU-Interface Parity-Error Interrupt */
+#define NILE4_INT_CNTD 1 /* CPU No-Target Decode Interrupt */
+#define NILE4_INT_MCE 2 /* Memory-Check Error Interrupt */
+#define NILE4_INT_DMA 3 /* DMA Controller Interrupt */
+#define NILE4_INT_UART 4 /* UART Interrupt */
+#define NILE4_INT_WDOG 5 /* Watchdog Timer Interrupt */
+#define NILE4_INT_GPT 6 /* General-Purpose Timer Interrupt */
+#define NILE4_INT_LBRTD 7 /* Local-Bus Ready Timer Interrupt */
+#define NILE4_INT_INTA 8 /* PCI Interrupt Signal INTA# */
+#define NILE4_INT_INTB 9 /* PCI Interrupt Signal INTB# */
+#define NILE4_INT_INTC 10 /* PCI Interrupt Signal INTC# */
+#define NILE4_INT_INTD 11 /* PCI Interrupt Signal INTD# */
+#define NILE4_INT_INTE 12 /* PCI Interrupt Signal INTE# (ISA cascade) */
+#define NILE4_INT_RESV 13 /* Reserved */
+#define NILE4_INT_PCIS 14 /* PCI SERR# Interrupt */
+#define NILE4_INT_PCIE 15 /* PCI Internal Error Interrupt */
+
+
+ /*
+ * Nile 4 Register Access
+ */
+
+static inline void nile4_sync(void)
+{
+ volatile u32 *p = (volatile u32 *)0xbfc00000;
+ (void)(*p);
+}
+
+static inline void nile4_out32(u32 offset, u32 val)
+{
+ *(volatile u32 *)(NILE4_BASE+offset) = val;
+ nile4_sync();
+}
+
+static inline u32 nile4_in32(u32 offset)
+{
+ u32 val = *(volatile u32 *)(NILE4_BASE+offset);
+ nile4_sync();
+ return val;
+}
+
+static inline void nile4_out16(u32 offset, u16 val)
+{
+ *(volatile u16 *)(NILE4_BASE+offset) = val;
+ nile4_sync();
+}
+
+static inline u16 nile4_in16(u32 offset)
+{
+ u16 val = *(volatile u16 *)(NILE4_BASE+offset);
+ nile4_sync();
+ return val;
+}
+
+static inline void nile4_out8(u32 offset, u8 val)
+{
+ *(volatile u8 *)(NILE4_BASE+offset) = val;
+ nile4_sync();
+}
+
+static inline u8 nile4_in8(u32 offset)
+{
+ u8 val = *(volatile u8 *)(NILE4_BASE+offset);
+ nile4_sync();
+ return val;
+}
+
+
+ /*
+ * Physical Device Address Registers
+ */
+
+extern void nile4_set_pdar(u32 pdar, u32 phys, u32 size, int width,
+ int on_memory_bus, int visible);
+
+
+ /*
+ * PCI Master Registers
+ */
+
+#define NILE4_PCICMD_IACK 0 /* PCI Interrupt Acknowledge */
+#define NILE4_PCICMD_IO 1 /* PCI I/O Space */
+#define NILE4_PCICMD_MEM 3 /* PCI Memory Space */
+#define NILE4_PCICMD_CFG 5 /* PCI Configuration Space */
+
+
+ /*
+ * PCI Address Spaces
+ *
+ * Note that these are multiplexed using PCIINIT[01]!
+ */
+
+#define NILE4_PCI_IO_BASE 0xa6000000
+#define NILE4_PCI_MEM_BASE 0xa8000000
+#define NILE4_PCI_CFG_BASE NILE4_PCI_MEM_BASE
+#define NILE4_PCI_IACK_BASE NILE4_PCI_IO_BASE
+
+
+extern void nile4_set_pmr(u32 pmr, u32 type, u32 addr);
+
+
+ /*
+ * Interrupt Programming
+ */
+
+#define NUM_I8259_INTERRUPTS 16
+#define NUM_NILE4_INTERRUPTS 16
+
+#define IRQ_I8259_CASCADE NILE4_INT_INTE
+#define is_i8259_irq(irq) ((irq) < NUM_I8259_INTERRUPTS)
+#define nile4_to_irq(n) ((n)+NUM_I8259_INTERRUPTS)
+#define irq_to_nile4(n) ((n)-NUM_I8259_INTERRUPTS)
+
+extern void nile4_map_irq(int nile4_irq, int cpu_irq);
+extern void nile4_map_irq_all(int cpu_irq);
+extern void nile4_enable_irq(unsigned int nile4_irq);
+extern void nile4_disable_irq(unsigned int nile4_irq);
+extern void nile4_disable_irq_all(void);
+extern u16 nile4_get_irq_stat(int cpu_irq);
+extern void nile4_enable_irq_output(int cpu_irq);
+extern void nile4_disable_irq_output(int cpu_irq);
+extern void nile4_set_pci_irq_polarity(int pci_irq, int high);
+extern void nile4_set_pci_irq_level_or_edge(int pci_irq, int level);
+extern void nile4_clear_irq(int nile4_irq);
+extern void nile4_clear_irq_mask(u32 mask);
+extern u8 nile4_i8259_iack(void);
+extern void nile4_dump_irq_status(void); /* Debug */
+
+#endif
+
diff --git a/arch/mips/include/asm/paccess.h b/arch/mips/include/asm/paccess.h
new file mode 100644
index 00000000000..c2394f8b0fe
--- /dev/null
+++ b/arch/mips/include/asm/paccess.h
@@ -0,0 +1,112 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1997, 1998, 1999, 2000 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ *
+ * Protected memory access. Used for everything that might take revenge
+ * by sending a DBE error like accessing possibly non-existant memory or
+ * devices.
+ */
+#ifndef _ASM_PACCESS_H
+#define _ASM_PACCESS_H
+
+#include <linux/errno.h>
+
+#ifdef CONFIG_32BIT
+#define __PA_ADDR ".word"
+#endif
+#ifdef CONFIG_64BIT
+#define __PA_ADDR ".dword"
+#endif
+
+extern asmlinkage void handle_ibe(void);
+extern asmlinkage void handle_dbe(void);
+
+#define put_dbe(x, ptr) __put_dbe((x), (ptr), sizeof(*(ptr)))
+#define get_dbe(x, ptr) __get_dbe((x), (ptr), sizeof(*(ptr)))
+
+struct __large_pstruct { unsigned long buf[100]; };
+#define __mp(x) (*(struct __large_pstruct *)(x))
+
+#define __get_dbe(x, ptr, size) \
+({ \
+ long __gu_err; \
+ __typeof__(*(ptr)) __gu_val; \
+ unsigned long __gu_addr; \
+ __asm__("":"=r" (__gu_val)); \
+ __gu_addr = (unsigned long) (ptr); \
+ __asm__("":"=r" (__gu_err)); \
+ switch (size) { \
+ case 1: __get_dbe_asm("lb"); break; \
+ case 2: __get_dbe_asm("lh"); break; \
+ case 4: __get_dbe_asm("lw"); break; \
+ case 8: __get_dbe_asm("ld"); break; \
+ default: __get_dbe_unknown(); break; \
+ } \
+ x = (__typeof__(*(ptr))) __gu_val; \
+ __gu_err; \
+})
+
+#define __get_dbe_asm(insn) \
+{ \
+ __asm__ __volatile__( \
+ "1:\t" insn "\t%1,%2\n\t" \
+ "move\t%0,$0\n" \
+ "2:\n\t" \
+ ".section\t.fixup,\"ax\"\n" \
+ "3:\tli\t%0,%3\n\t" \
+ "move\t%1,$0\n\t" \
+ "j\t2b\n\t" \
+ ".previous\n\t" \
+ ".section\t__dbe_table,\"a\"\n\t" \
+ __PA_ADDR "\t1b, 3b\n\t" \
+ ".previous" \
+ :"=r" (__gu_err), "=r" (__gu_val) \
+ :"o" (__mp(__gu_addr)), "i" (-EFAULT)); \
+}
+
+extern void __get_dbe_unknown(void);
+
+#define __put_dbe(x, ptr, size) \
+({ \
+ long __pu_err; \
+ __typeof__(*(ptr)) __pu_val; \
+ long __pu_addr; \
+ __pu_val = (x); \
+ __pu_addr = (long) (ptr); \
+ __asm__("":"=r" (__pu_err)); \
+ switch (size) { \
+ case 1: __put_dbe_asm("sb"); break; \
+ case 2: __put_dbe_asm("sh"); break; \
+ case 4: __put_dbe_asm("sw"); break; \
+ case 8: __put_dbe_asm("sd"); break; \
+ default: __put_dbe_unknown(); break; \
+ } \
+ __pu_err; \
+})
+
+#define __put_dbe_asm(insn) \
+{ \
+ __asm__ __volatile__( \
+ "1:\t" insn "\t%1,%2\n\t" \
+ "move\t%0,$0\n" \
+ "2:\n\t" \
+ ".section\t.fixup,\"ax\"\n" \
+ "3:\tli\t%0,%3\n\t" \
+ "j\t2b\n\t" \
+ ".previous\n\t" \
+ ".section\t__dbe_table,\"a\"\n\t" \
+ __PA_ADDR "\t1b, 3b\n\t" \
+ ".previous" \
+ : "=r" (__pu_err) \
+ : "r" (__pu_val), "o" (__mp(__pu_addr)), "i" (-EFAULT)); \
+}
+
+extern void __put_dbe_unknown(void);
+
+extern unsigned long search_dbe_table(unsigned long addr);
+
+#endif /* _ASM_PACCESS_H */
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
new file mode 100644
index 00000000000..fe7a88ea066
--- /dev/null
+++ b/arch/mips/include/asm/page.h
@@ -0,0 +1,191 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 1999, 2000, 03 Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_PAGE_H
+#define _ASM_PAGE_H
+
+#include <spaces.h>
+
+/*
+ * PAGE_SHIFT determines the page size
+ */
+#ifdef CONFIG_PAGE_SIZE_4KB
+#define PAGE_SHIFT 12
+#endif
+#ifdef CONFIG_PAGE_SIZE_8KB
+#define PAGE_SHIFT 13
+#endif
+#ifdef CONFIG_PAGE_SIZE_16KB
+#define PAGE_SHIFT 14
+#endif
+#ifdef CONFIG_PAGE_SIZE_64KB
+#define PAGE_SHIFT 16
+#endif
+#define PAGE_SIZE (1UL << PAGE_SHIFT)
+#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1))
+
+#ifndef __ASSEMBLY__
+
+#include <linux/pfn.h>
+#include <asm/io.h>
+
+extern void build_clear_page(void);
+extern void build_copy_page(void);
+
+/*
+ * It's normally defined only for FLATMEM config but it's
+ * used in our early mem init code for all memory models.
+ * So always define it.
+ */
+#define ARCH_PFN_OFFSET PFN_UP(PHYS_OFFSET)
+
+extern void clear_page(void * page);
+extern void copy_page(void * to, void * from);
+
+extern unsigned long shm_align_mask;
+
+static inline unsigned long pages_do_alias(unsigned long addr1,
+ unsigned long addr2)
+{
+ return (addr1 ^ addr2) & shm_align_mask;
+}
+
+struct page;
+
+static inline void clear_user_page(void *addr, unsigned long vaddr,
+ struct page *page)
+{
+ extern void (*flush_data_cache_page)(unsigned long addr);
+
+ clear_page(addr);
+ if (pages_do_alias((unsigned long) addr, vaddr & PAGE_MASK))
+ flush_data_cache_page((unsigned long)addr);
+}
+
+extern void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
+ struct page *to);
+struct vm_area_struct;
+extern void copy_user_highpage(struct page *to, struct page *from,
+ unsigned long vaddr, struct vm_area_struct *vma);
+
+#define __HAVE_ARCH_COPY_USER_HIGHPAGE
+
+/*
+ * These are used to make use of C type-checking..
+ */
+#ifdef CONFIG_64BIT_PHYS_ADDR
+ #ifdef CONFIG_CPU_MIPS32
+ typedef struct { unsigned long pte_low, pte_high; } pte_t;
+ #define pte_val(x) ((x).pte_low | ((unsigned long long)(x).pte_high << 32))
+ #define __pte(x) ({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; })
+ #else
+ typedef struct { unsigned long long pte; } pte_t;
+ #define pte_val(x) ((x).pte)
+ #define __pte(x) ((pte_t) { (x) } )
+ #endif
+#else
+typedef struct { unsigned long pte; } pte_t;
+#define pte_val(x) ((x).pte)
+#define __pte(x) ((pte_t) { (x) } )
+#endif
+typedef struct page *pgtable_t;
+
+/*
+ * For 3-level pagetables we defines these ourselves, for 2-level the
+ * definitions are supplied by <asm-generic/pgtable-nopmd.h>.
+ */
+#ifdef CONFIG_64BIT
+
+typedef struct { unsigned long pmd; } pmd_t;
+#define pmd_val(x) ((x).pmd)
+#define __pmd(x) ((pmd_t) { (x) } )
+
+#endif
+
+/*
+ * Right now we don't support 4-level pagetables, so all pud-related
+ * definitions come from <asm-generic/pgtable-nopud.h>.
+ */
+
+/*
+ * Finall the top of the hierarchy, the pgd
+ */
+typedef struct { unsigned long pgd; } pgd_t;
+#define pgd_val(x) ((x).pgd)
+#define __pgd(x) ((pgd_t) { (x) } )
+
+/*
+ * Manipulate page protection bits
+ */
+typedef struct { unsigned long pgprot; } pgprot_t;
+#define pgprot_val(x) ((x).pgprot)
+#define __pgprot(x) ((pgprot_t) { (x) } )
+
+/*
+ * On R4000-style MMUs where a TLB entry is mapping a adjacent even / odd
+ * pair of pages we only have a single global bit per pair of pages. When
+ * writing to the TLB make sure we always have the bit set for both pages
+ * or none. This macro is used to access the `buddy' of the pte we're just
+ * working on.
+ */
+#define ptep_buddy(x) ((pte_t *)((unsigned long)(x) ^ sizeof(pte_t)))
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * __pa()/__va() should be used only during mem init.
+ */
+#ifdef CONFIG_64BIT
+#define __pa(x) \
+({ \
+ unsigned long __x = (unsigned long)(x); \
+ __x < CKSEG0 ? XPHYSADDR(__x) : CPHYSADDR(__x); \
+})
+#else
+#define __pa(x) \
+ ((unsigned long)(x) - PAGE_OFFSET + PHYS_OFFSET)
+#endif
+#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET - PHYS_OFFSET))
+#define __pa_symbol(x) __pa(RELOC_HIDE((unsigned long)(x), 0))
+
+#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
+
+#ifdef CONFIG_FLATMEM
+
+#define pfn_valid(pfn) ((pfn) >= ARCH_PFN_OFFSET && (pfn) < max_mapnr)
+
+#elif defined(CONFIG_SPARSEMEM)
+
+/* pfn_valid is defined in linux/mmzone.h */
+
+#elif defined(CONFIG_NEED_MULTIPLE_NODES)
+
+#define pfn_valid(pfn) \
+({ \
+ unsigned long __pfn = (pfn); \
+ int __n = pfn_to_nid(__pfn); \
+ ((__n >= 0) ? (__pfn < NODE_DATA(__n)->node_start_pfn + \
+ NODE_DATA(__n)->node_spanned_pages) \
+ : 0); \
+})
+
+#endif
+
+#define virt_to_page(kaddr) pfn_to_page(PFN_DOWN(virt_to_phys(kaddr)))
+#define virt_addr_valid(kaddr) pfn_valid(PFN_DOWN(virt_to_phys(kaddr)))
+
+#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
+ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE)
+#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET)
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/page.h>
+
+#endif /* _ASM_PAGE_H */
diff --git a/arch/mips/include/asm/param.h b/arch/mips/include/asm/param.h
new file mode 100644
index 00000000000..1d9bb8c5ab2
--- /dev/null
+++ b/arch/mips/include/asm/param.h
@@ -0,0 +1,31 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 1994 - 2000, 2002 Ralf Baechle (ralf@gnu.org)
+ * Copyright 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_PARAM_H
+#define _ASM_PARAM_H
+
+#ifdef __KERNEL__
+
+# define HZ CONFIG_HZ /* Internal kernel timer frequency */
+# define USER_HZ 100 /* .. some user interfaces are in "ticks" */
+# define CLOCKS_PER_SEC (USER_HZ) /* like times() */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE 65536
+
+#ifndef NOGROUP
+#define NOGROUP (-1)
+#endif
+
+#define MAXHOSTNAMELEN 64 /* max length of hostname */
+
+#endif /* _ASM_PARAM_H */
diff --git a/arch/mips/include/asm/parport.h b/arch/mips/include/asm/parport.h
new file mode 100644
index 00000000000..f52656826cc
--- /dev/null
+++ b/arch/mips/include/asm/parport.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 1999, 2000 Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This file should only be included by drivers/parport/parport_pc.c.
+ */
+#ifndef _ASM_PARPORT_H
+#define _ASM_PARPORT_H
+
+static int __devinit parport_pc_find_isa_ports(int autoirq, int autodma);
+static int __devinit parport_pc_find_nonpci_ports(int autoirq, int autodma)
+{
+ return parport_pc_find_isa_ports(autoirq, autodma);
+}
+
+#endif /* _ASM_PARPORT_H */
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
new file mode 100644
index 00000000000..5510c53b7fe
--- /dev/null
+++ b/arch/mips/include/asm/pci.h
@@ -0,0 +1,179 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef _ASM_PCI_H
+#define _ASM_PCI_H
+
+#include <linux/mm.h>
+
+#ifdef __KERNEL__
+
+/*
+ * This file essentially defines the interface between board
+ * specific PCI code and MIPS common PCI code. Should potentially put
+ * into include/asm/pci.h file.
+ */
+
+#include <linux/ioport.h>
+
+/*
+ * Each pci channel is a top-level PCI bus seem by CPU. A machine with
+ * multiple PCI channels may have multiple PCI host controllers or a
+ * single controller supporting multiple channels.
+ */
+struct pci_controller {
+ struct pci_controller *next;
+ struct pci_bus *bus;
+
+ struct pci_ops *pci_ops;
+ struct resource *mem_resource;
+ unsigned long mem_offset;
+ struct resource *io_resource;
+ unsigned long io_offset;
+ unsigned long io_map_base;
+
+ unsigned int index;
+ /* For compatibility with current (as of July 2003) pciutils
+ and XFree86. Eventually will be removed. */
+ unsigned int need_domain_info;
+
+ int iommu;
+
+ /* Optional access methods for reading/writing the bus number
+ of the PCI controller */
+ int (*get_busno)(void);
+ void (*set_busno)(int busno);
+};
+
+/*
+ * Used by boards to register their PCI busses before the actual scanning.
+ */
+extern struct pci_controller * alloc_pci_controller(void);
+extern void register_pci_controller(struct pci_controller *hose);
+
+/*
+ * board supplied pci irq fixup routine
+ */
+extern int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+ already-configured bus numbers - to be used for buggy BIOSes
+ or architectures with incomplete PCI setup by the loader */
+
+extern unsigned int pcibios_assign_all_busses(void);
+
+#define pcibios_scan_all_fns(a, b) 0
+
+extern unsigned long PCIBIOS_MIN_IO;
+extern unsigned long PCIBIOS_MIN_MEM;
+
+#define PCIBIOS_MIN_CARDBUS_IO 0x4000
+
+extern void pcibios_set_master(struct pci_dev *dev);
+
+static inline void pcibios_penalize_isa_irq(int irq, int active)
+{
+ /* We don't do dynamic PCI IRQ allocation */
+}
+
+/*
+ * Dynamic DMA mapping stuff.
+ * MIPS has everything mapped statically.
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <asm/scatterlist.h>
+#include <linux/string.h>
+#include <asm/io.h>
+
+struct pci_dev;
+
+/*
+ * The PCI address space does equal the physical memory address space. The
+ * networking and block device layers use this boolean for bounce buffer
+ * decisions. This is set if any hose does not have an IOMMU.
+ */
+extern unsigned int PCI_DMA_BUS_IS_PHYS;
+
+#ifdef CONFIG_DMA_NEED_PCI_MAP_STATE
+
+/* pci_unmap_{single,page} is not a nop, thus... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) __u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME) ((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) (((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME) ((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL) (((PTR)->LEN_NAME) = (VAL))
+
+#else /* CONFIG_DMA_NEED_PCI_MAP_STATE */
+
+/* pci_unmap_{page,single} is a nop so... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
+#define pci_unmap_addr(PTR, ADDR_NAME) (0)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
+#define pci_unmap_len(PTR, LEN_NAME) (0)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
+
+#endif /* CONFIG_DMA_NEED_PCI_MAP_STATE */
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+ enum pci_dma_burst_strategy *strat,
+ unsigned long *strategy_parameter)
+{
+ *strat = PCI_DMA_BURST_INFINITY;
+ *strategy_parameter = ~0UL;
+}
+#endif
+
+extern void pcibios_resource_to_bus(struct pci_dev *dev,
+ struct pci_bus_region *region, struct resource *res);
+
+extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+ struct pci_bus_region *region);
+
+static inline struct resource *
+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
+{
+ struct resource *root = NULL;
+
+ if (res->flags & IORESOURCE_IO)
+ root = &ioport_resource;
+ if (res->flags & IORESOURCE_MEM)
+ root = &iomem_resource;
+
+ return root;
+}
+
+#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
+
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+ struct pci_controller *hose = bus->sysdata;
+ return hose->need_domain_info;
+}
+
+#endif /* __KERNEL__ */
+
+/* implement the pci_ DMA API in terms of the generic device dma_ one */
+#include <asm-generic/pci-dma-compat.h>
+
+/* Do platform specific device initialization at pci_enable_device() time */
+extern int pcibios_plat_dev_init(struct pci_dev *dev);
+
+/* Chances are this interrupt is wired PC-style ... */
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+ return channel ? 15 : 14;
+}
+
+extern int pci_probe_only;
+
+extern char * (*pcibios_plat_setup)(char *str);
+
+#endif /* _ASM_PCI_H */
diff --git a/arch/mips/include/asm/pci/bridge.h b/arch/mips/include/asm/pci/bridge.h
new file mode 100644
index 00000000000..5f4b9d4e411
--- /dev/null
+++ b/arch/mips/include/asm/pci/bridge.h
@@ -0,0 +1,854 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * bridge.h - bridge chip header file, derived from IRIX <sys/PCI/bridge.h>,
+ * revision 1.76.
+ *
+ * Copyright (C) 1996, 1999 Silcon Graphics, Inc.
+ * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_PCI_BRIDGE_H
+#define _ASM_PCI_BRIDGE_H
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <asm/xtalk/xwidget.h> /* generic widget header */
+#include <asm/sn/types.h>
+
+/* I/O page size */
+
+#define IOPFNSHIFT 12 /* 4K per mapped page */
+
+#define IOPGSIZE (1 << IOPFNSHIFT)
+#define IOPG(x) ((x) >> IOPFNSHIFT)
+#define IOPGOFF(x) ((x) & (IOPGSIZE-1))
+
+/* Bridge RAM sizes */
+
+#define BRIDGE_ATE_RAM_SIZE 0x00000400 /* 1kB ATE RAM */
+
+#define BRIDGE_CONFIG_BASE 0x20000
+#define BRIDGE_CONFIG1_BASE 0x28000
+#define BRIDGE_CONFIG_END 0x30000
+#define BRIDGE_CONFIG_SLOT_SIZE 0x1000
+
+#define BRIDGE_SSRAM_512K 0x00080000 /* 512kB */
+#define BRIDGE_SSRAM_128K 0x00020000 /* 128kB */
+#define BRIDGE_SSRAM_64K 0x00010000 /* 64kB */
+#define BRIDGE_SSRAM_0K 0x00000000 /* 0kB */
+
+/* ========================================================================
+ * Bridge address map
+ */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * All accesses to bridge hardware registers must be done
+ * using 32-bit loads and stores.
+ */
+typedef u32 bridgereg_t;
+
+typedef u64 bridge_ate_t;
+
+/* pointers to bridge ATEs
+ * are always "pointer to volatile"
+ */
+typedef volatile bridge_ate_t *bridge_ate_p;
+
+/*
+ * It is generally preferred that hardware registers on the bridge
+ * are located from C code via this structure.
+ *
+ * Generated from Bridge spec dated 04oct95
+ */
+
+typedef volatile struct bridge_s {
+ /* Local Registers 0x000000-0x00FFFF */
+
+ /* standard widget configuration 0x000000-0x000057 */
+ widget_cfg_t b_widget; /* 0x000000 */
+
+ /* helper fieldnames for accessing bridge widget */
+
+#define b_wid_id b_widget.w_id
+#define b_wid_stat b_widget.w_status
+#define b_wid_err_upper b_widget.w_err_upper_addr
+#define b_wid_err_lower b_widget.w_err_lower_addr
+#define b_wid_control b_widget.w_control
+#define b_wid_req_timeout b_widget.w_req_timeout
+#define b_wid_int_upper b_widget.w_intdest_upper_addr
+#define b_wid_int_lower b_widget.w_intdest_lower_addr
+#define b_wid_err_cmdword b_widget.w_err_cmd_word
+#define b_wid_llp b_widget.w_llp_cfg
+#define b_wid_tflush b_widget.w_tflush
+
+ /* bridge-specific widget configuration 0x000058-0x00007F */
+ bridgereg_t _pad_000058;
+ bridgereg_t b_wid_aux_err; /* 0x00005C */
+ bridgereg_t _pad_000060;
+ bridgereg_t b_wid_resp_upper; /* 0x000064 */
+ bridgereg_t _pad_000068;
+ bridgereg_t b_wid_resp_lower; /* 0x00006C */
+ bridgereg_t _pad_000070;
+ bridgereg_t b_wid_tst_pin_ctrl; /* 0x000074 */
+ bridgereg_t _pad_000078[2];
+
+ /* PMU & Map 0x000080-0x00008F */
+ bridgereg_t _pad_000080;
+ bridgereg_t b_dir_map; /* 0x000084 */
+ bridgereg_t _pad_000088[2];
+
+ /* SSRAM 0x000090-0x00009F */
+ bridgereg_t _pad_000090;
+ bridgereg_t b_ram_perr; /* 0x000094 */
+ bridgereg_t _pad_000098[2];
+
+ /* Arbitration 0x0000A0-0x0000AF */
+ bridgereg_t _pad_0000A0;
+ bridgereg_t b_arb; /* 0x0000A4 */
+ bridgereg_t _pad_0000A8[2];
+
+ /* Number In A Can 0x0000B0-0x0000BF */
+ bridgereg_t _pad_0000B0;
+ bridgereg_t b_nic; /* 0x0000B4 */
+ bridgereg_t _pad_0000B8[2];
+
+ /* PCI/GIO 0x0000C0-0x0000FF */
+ bridgereg_t _pad_0000C0;
+ bridgereg_t b_bus_timeout; /* 0x0000C4 */
+#define b_pci_bus_timeout b_bus_timeout
+
+ bridgereg_t _pad_0000C8;
+ bridgereg_t b_pci_cfg; /* 0x0000CC */
+ bridgereg_t _pad_0000D0;
+ bridgereg_t b_pci_err_upper; /* 0x0000D4 */
+ bridgereg_t _pad_0000D8;
+ bridgereg_t b_pci_err_lower; /* 0x0000DC */
+ bridgereg_t _pad_0000E0[8];
+#define b_gio_err_lower b_pci_err_lower
+#define b_gio_err_upper b_pci_err_upper
+
+ /* Interrupt 0x000100-0x0001FF */
+ bridgereg_t _pad_000100;
+ bridgereg_t b_int_status; /* 0x000104 */
+ bridgereg_t _pad_000108;
+ bridgereg_t b_int_enable; /* 0x00010C */
+ bridgereg_t _pad_000110;
+ bridgereg_t b_int_rst_stat; /* 0x000114 */
+ bridgereg_t _pad_000118;
+ bridgereg_t b_int_mode; /* 0x00011C */
+ bridgereg_t _pad_000120;
+ bridgereg_t b_int_device; /* 0x000124 */
+ bridgereg_t _pad_000128;
+ bridgereg_t b_int_host_err; /* 0x00012C */
+
+ struct {
+ bridgereg_t __pad; /* 0x0001{30,,,68} */
+ bridgereg_t addr; /* 0x0001{34,,,6C} */
+ } b_int_addr[8]; /* 0x000130 */
+
+ bridgereg_t _pad_000170[36];
+
+ /* Device 0x000200-0x0003FF */
+ struct {
+ bridgereg_t __pad; /* 0x0002{00,,,38} */
+ bridgereg_t reg; /* 0x0002{04,,,3C} */
+ } b_device[8]; /* 0x000200 */
+
+ struct {
+ bridgereg_t __pad; /* 0x0002{40,,,78} */
+ bridgereg_t reg; /* 0x0002{44,,,7C} */
+ } b_wr_req_buf[8]; /* 0x000240 */
+
+ struct {
+ bridgereg_t __pad; /* 0x0002{80,,,88} */
+ bridgereg_t reg; /* 0x0002{84,,,8C} */
+ } b_rrb_map[2]; /* 0x000280 */
+#define b_even_resp b_rrb_map[0].reg /* 0x000284 */
+#define b_odd_resp b_rrb_map[1].reg /* 0x00028C */
+
+ bridgereg_t _pad_000290;
+ bridgereg_t b_resp_status; /* 0x000294 */
+ bridgereg_t _pad_000298;
+ bridgereg_t b_resp_clear; /* 0x00029C */
+
+ bridgereg_t _pad_0002A0[24];
+
+ char _pad_000300[0x10000 - 0x000300];
+
+ /* Internal Address Translation Entry RAM 0x010000-0x0103FF */
+ union {
+ bridge_ate_t wr; /* write-only */
+ struct {
+ bridgereg_t _p_pad;
+ bridgereg_t rd; /* read-only */
+ } hi;
+ } b_int_ate_ram[128];
+
+ char _pad_010400[0x11000 - 0x010400];
+
+ /* Internal Address Translation Entry RAM LOW 0x011000-0x0113FF */
+ struct {
+ bridgereg_t _p_pad;
+ bridgereg_t rd; /* read-only */
+ } b_int_ate_ram_lo[128];
+
+ char _pad_011400[0x20000 - 0x011400];
+
+ /* PCI Device Configuration Spaces 0x020000-0x027FFF */
+ union { /* make all access sizes available. */
+ u8 c[0x1000 / 1];
+ u16 s[0x1000 / 2];
+ u32 l[0x1000 / 4];
+ u64 d[0x1000 / 8];
+ union {
+ u8 c[0x100 / 1];
+ u16 s[0x100 / 2];
+ u32 l[0x100 / 4];
+ u64 d[0x100 / 8];
+ } f[8];
+ } b_type0_cfg_dev[8]; /* 0x020000 */
+
+ /* PCI Type 1 Configuration Space 0x028000-0x028FFF */
+ union { /* make all access sizes available. */
+ u8 c[0x1000 / 1];
+ u16 s[0x1000 / 2];
+ u32 l[0x1000 / 4];
+ u64 d[0x1000 / 8];
+ } b_type1_cfg; /* 0x028000-0x029000 */
+
+ char _pad_029000[0x007000]; /* 0x029000-0x030000 */
+
+ /* PCI Interrupt Acknowledge Cycle 0x030000 */
+ union {
+ u8 c[8 / 1];
+ u16 s[8 / 2];
+ u32 l[8 / 4];
+ u64 d[8 / 8];
+ } b_pci_iack; /* 0x030000 */
+
+ u8 _pad_030007[0x04fff8]; /* 0x030008-0x07FFFF */
+
+ /* External Address Translation Entry RAM 0x080000-0x0FFFFF */
+ bridge_ate_t b_ext_ate_ram[0x10000];
+
+ /* Reserved 0x100000-0x1FFFFF */
+ char _pad_100000[0x200000-0x100000];
+
+ /* PCI/GIO Device Spaces 0x200000-0xBFFFFF */
+ union { /* make all access sizes available. */
+ u8 c[0x100000 / 1];
+ u16 s[0x100000 / 2];
+ u32 l[0x100000 / 4];
+ u64 d[0x100000 / 8];
+ } b_devio_raw[10]; /* 0x200000 */
+
+ /* b_devio macro is a bit strange; it reflects the
+ * fact that the Bridge ASIC provides 2M for the
+ * first two DevIO windows and 1M for the other six.
+ */
+#define b_devio(n) b_devio_raw[((n)<2)?(n*2):(n+2)]
+
+ /* External Flash Proms 1,0 0xC00000-0xFFFFFF */
+ union { /* make all access sizes available. */
+ u8 c[0x400000 / 1]; /* read-only */
+ u16 s[0x400000 / 2]; /* read-write */
+ u32 l[0x400000 / 4]; /* read-only */
+ u64 d[0x400000 / 8]; /* read-only */
+ } b_external_flash; /* 0xC00000 */
+} bridge_t;
+
+/*
+ * Field formats for Error Command Word and Auxillary Error Command Word
+ * of bridge.
+ */
+typedef struct bridge_err_cmdword_s {
+ union {
+ u32 cmd_word;
+ struct {
+ u32 didn:4, /* Destination ID */
+ sidn:4, /* Source ID */
+ pactyp:4, /* Packet type */
+ tnum:5, /* Trans Number */
+ coh:1, /* Coh Transacti */
+ ds:2, /* Data size */
+ gbr:1, /* GBR enable */
+ vbpm:1, /* VBPM message */
+ error:1, /* Error occurred */
+ barr:1, /* Barrier op */
+ rsvd:8;
+ } berr_st;
+ } berr_un;
+} bridge_err_cmdword_t;
+
+#define berr_field berr_un.berr_st
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * The values of these macros can and should be crosschecked
+ * regularly against the offsets of the like-named fields
+ * within the "bridge_t" structure above.
+ */
+
+/* Byte offset macros for Bridge internal registers */
+
+#define BRIDGE_WID_ID WIDGET_ID
+#define BRIDGE_WID_STAT WIDGET_STATUS
+#define BRIDGE_WID_ERR_UPPER WIDGET_ERR_UPPER_ADDR
+#define BRIDGE_WID_ERR_LOWER WIDGET_ERR_LOWER_ADDR
+#define BRIDGE_WID_CONTROL WIDGET_CONTROL
+#define BRIDGE_WID_REQ_TIMEOUT WIDGET_REQ_TIMEOUT
+#define BRIDGE_WID_INT_UPPER WIDGET_INTDEST_UPPER_ADDR
+#define BRIDGE_WID_INT_LOWER WIDGET_INTDEST_LOWER_ADDR
+#define BRIDGE_WID_ERR_CMDWORD WIDGET_ERR_CMD_WORD
+#define BRIDGE_WID_LLP WIDGET_LLP_CFG
+#define BRIDGE_WID_TFLUSH WIDGET_TFLUSH
+
+#define BRIDGE_WID_AUX_ERR 0x00005C /* Aux Error Command Word */
+#define BRIDGE_WID_RESP_UPPER 0x000064 /* Response Buf Upper Addr */
+#define BRIDGE_WID_RESP_LOWER 0x00006C /* Response Buf Lower Addr */
+#define BRIDGE_WID_TST_PIN_CTRL 0x000074 /* Test pin control */
+
+#define BRIDGE_DIR_MAP 0x000084 /* Direct Map reg */
+
+#define BRIDGE_RAM_PERR 0x000094 /* SSRAM Parity Error */
+
+#define BRIDGE_ARB 0x0000A4 /* Arbitration Priority reg */
+
+#define BRIDGE_NIC 0x0000B4 /* Number In A Can */
+
+#define BRIDGE_BUS_TIMEOUT 0x0000C4 /* Bus Timeout Register */
+#define BRIDGE_PCI_BUS_TIMEOUT BRIDGE_BUS_TIMEOUT
+#define BRIDGE_PCI_CFG 0x0000CC /* PCI Type 1 Config reg */
+#define BRIDGE_PCI_ERR_UPPER 0x0000D4 /* PCI error Upper Addr */
+#define BRIDGE_PCI_ERR_LOWER 0x0000DC /* PCI error Lower Addr */
+
+#define BRIDGE_INT_STATUS 0x000104 /* Interrupt Status */
+#define BRIDGE_INT_ENABLE 0x00010C /* Interrupt Enables */
+#define BRIDGE_INT_RST_STAT 0x000114 /* Reset Intr Status */
+#define BRIDGE_INT_MODE 0x00011C /* Interrupt Mode */
+#define BRIDGE_INT_DEVICE 0x000124 /* Interrupt Device */
+#define BRIDGE_INT_HOST_ERR 0x00012C /* Host Error Field */
+
+#define BRIDGE_INT_ADDR0 0x000134 /* Host Address Reg */
+#define BRIDGE_INT_ADDR_OFF 0x000008 /* Host Addr offset (1..7) */
+#define BRIDGE_INT_ADDR(x) (BRIDGE_INT_ADDR0+(x)*BRIDGE_INT_ADDR_OFF)
+
+#define BRIDGE_DEVICE0 0x000204 /* Device 0 */
+#define BRIDGE_DEVICE_OFF 0x000008 /* Device offset (1..7) */
+#define BRIDGE_DEVICE(x) (BRIDGE_DEVICE0+(x)*BRIDGE_DEVICE_OFF)
+
+#define BRIDGE_WR_REQ_BUF0 0x000244 /* Write Request Buffer 0 */
+#define BRIDGE_WR_REQ_BUF_OFF 0x000008 /* Buffer Offset (1..7) */
+#define BRIDGE_WR_REQ_BUF(x) (BRIDGE_WR_REQ_BUF0+(x)*BRIDGE_WR_REQ_BUF_OFF)
+
+#define BRIDGE_EVEN_RESP 0x000284 /* Even Device Response Buf */
+#define BRIDGE_ODD_RESP 0x00028C /* Odd Device Response Buf */
+
+#define BRIDGE_RESP_STATUS 0x000294 /* Read Response Status reg */
+#define BRIDGE_RESP_CLEAR 0x00029C /* Read Response Clear reg */
+
+/* Byte offset macros for Bridge I/O space */
+
+#define BRIDGE_ATE_RAM 0x00010000 /* Internal Addr Xlat Ram */
+
+#define BRIDGE_TYPE0_CFG_DEV0 0x00020000 /* Type 0 Cfg, Device 0 */
+#define BRIDGE_TYPE0_CFG_SLOT_OFF 0x00001000 /* Type 0 Cfg Slot Offset (1..7) */
+#define BRIDGE_TYPE0_CFG_FUNC_OFF 0x00000100 /* Type 0 Cfg Func Offset (1..7) */
+#define BRIDGE_TYPE0_CFG_DEV(s) (BRIDGE_TYPE0_CFG_DEV0+\
+ (s)*BRIDGE_TYPE0_CFG_SLOT_OFF)
+#define BRIDGE_TYPE0_CFG_DEVF(s, f) (BRIDGE_TYPE0_CFG_DEV0+\
+ (s)*BRIDGE_TYPE0_CFG_SLOT_OFF+\
+ (f)*BRIDGE_TYPE0_CFG_FUNC_OFF)
+
+#define BRIDGE_TYPE1_CFG 0x00028000 /* Type 1 Cfg space */
+
+#define BRIDGE_PCI_IACK 0x00030000 /* PCI Interrupt Ack */
+#define BRIDGE_EXT_SSRAM 0x00080000 /* Extern SSRAM (ATE) */
+
+/* Byte offset macros for Bridge device IO spaces */
+
+#define BRIDGE_DEV_CNT 8 /* Up to 8 devices per bridge */
+#define BRIDGE_DEVIO0 0x00200000 /* Device IO 0 Addr */
+#define BRIDGE_DEVIO1 0x00400000 /* Device IO 1 Addr */
+#define BRIDGE_DEVIO2 0x00600000 /* Device IO 2 Addr */
+#define BRIDGE_DEVIO_OFF 0x00100000 /* Device IO Offset (3..7) */
+
+#define BRIDGE_DEVIO_2MB 0x00200000 /* Device IO Offset (0..1) */
+#define BRIDGE_DEVIO_1MB 0x00100000 /* Device IO Offset (2..7) */
+
+#define BRIDGE_DEVIO(x) ((x)<=1 ? BRIDGE_DEVIO0+(x)*BRIDGE_DEVIO_2MB : BRIDGE_DEVIO2+((x)-2)*BRIDGE_DEVIO_1MB)
+
+#define BRIDGE_EXTERNAL_FLASH 0x00C00000 /* External Flash PROMS */
+
+/* ========================================================================
+ * Bridge register bit field definitions
+ */
+
+/* Widget part number of bridge */
+#define BRIDGE_WIDGET_PART_NUM 0xc002
+#define XBRIDGE_WIDGET_PART_NUM 0xd002
+
+/* Manufacturer of bridge */
+#define BRIDGE_WIDGET_MFGR_NUM 0x036
+#define XBRIDGE_WIDGET_MFGR_NUM 0x024
+
+/* Revision numbers for known Bridge revisions */
+#define BRIDGE_REV_A 0x1
+#define BRIDGE_REV_B 0x2
+#define BRIDGE_REV_C 0x3
+#define BRIDGE_REV_D 0x4
+
+/* Bridge widget status register bits definition */
+
+#define BRIDGE_STAT_LLP_REC_CNT (0xFFu << 24)
+#define BRIDGE_STAT_LLP_TX_CNT (0xFF << 16)
+#define BRIDGE_STAT_FLASH_SELECT (0x1 << 6)
+#define BRIDGE_STAT_PCI_GIO_N (0x1 << 5)
+#define BRIDGE_STAT_PENDING (0x1F << 0)
+
+/* Bridge widget control register bits definition */
+#define BRIDGE_CTRL_FLASH_WR_EN (0x1ul << 31)
+#define BRIDGE_CTRL_EN_CLK50 (0x1 << 30)
+#define BRIDGE_CTRL_EN_CLK40 (0x1 << 29)
+#define BRIDGE_CTRL_EN_CLK33 (0x1 << 28)
+#define BRIDGE_CTRL_RST(n) ((n) << 24)
+#define BRIDGE_CTRL_RST_MASK (BRIDGE_CTRL_RST(0xF))
+#define BRIDGE_CTRL_RST_PIN(x) (BRIDGE_CTRL_RST(0x1 << (x)))
+#define BRIDGE_CTRL_IO_SWAP (0x1 << 23)
+#define BRIDGE_CTRL_MEM_SWAP (0x1 << 22)
+#define BRIDGE_CTRL_PAGE_SIZE (0x1 << 21)
+#define BRIDGE_CTRL_SS_PAR_BAD (0x1 << 20)
+#define BRIDGE_CTRL_SS_PAR_EN (0x1 << 19)
+#define BRIDGE_CTRL_SSRAM_SIZE(n) ((n) << 17)
+#define BRIDGE_CTRL_SSRAM_SIZE_MASK (BRIDGE_CTRL_SSRAM_SIZE(0x3))
+#define BRIDGE_CTRL_SSRAM_512K (BRIDGE_CTRL_SSRAM_SIZE(0x3))
+#define BRIDGE_CTRL_SSRAM_128K (BRIDGE_CTRL_SSRAM_SIZE(0x2))
+#define BRIDGE_CTRL_SSRAM_64K (BRIDGE_CTRL_SSRAM_SIZE(0x1))
+#define BRIDGE_CTRL_SSRAM_1K (BRIDGE_CTRL_SSRAM_SIZE(0x0))
+#define BRIDGE_CTRL_F_BAD_PKT (0x1 << 16)
+#define BRIDGE_CTRL_LLP_XBAR_CRD(n) ((n) << 12)
+#define BRIDGE_CTRL_LLP_XBAR_CRD_MASK (BRIDGE_CTRL_LLP_XBAR_CRD(0xf))
+#define BRIDGE_CTRL_CLR_RLLP_CNT (0x1 << 11)
+#define BRIDGE_CTRL_CLR_TLLP_CNT (0x1 << 10)
+#define BRIDGE_CTRL_SYS_END (0x1 << 9)
+#define BRIDGE_CTRL_MAX_TRANS(n) ((n) << 4)
+#define BRIDGE_CTRL_MAX_TRANS_MASK (BRIDGE_CTRL_MAX_TRANS(0x1f))
+#define BRIDGE_CTRL_WIDGET_ID(n) ((n) << 0)
+#define BRIDGE_CTRL_WIDGET_ID_MASK (BRIDGE_CTRL_WIDGET_ID(0xf))
+
+/* Bridge Response buffer Error Upper Register bit fields definition */
+#define BRIDGE_RESP_ERRUPPR_DEVNUM_SHFT (20)
+#define BRIDGE_RESP_ERRUPPR_DEVNUM_MASK (0x7 << BRIDGE_RESP_ERRUPPR_DEVNUM_SHFT)
+#define BRIDGE_RESP_ERRUPPR_BUFNUM_SHFT (16)
+#define BRIDGE_RESP_ERRUPPR_BUFNUM_MASK (0xF << BRIDGE_RESP_ERRUPPR_BUFNUM_SHFT)
+#define BRIDGE_RESP_ERRRUPPR_BUFMASK (0xFFFF)
+
+#define BRIDGE_RESP_ERRUPPR_BUFNUM(x) \
+ (((x) & BRIDGE_RESP_ERRUPPR_BUFNUM_MASK) >> \
+ BRIDGE_RESP_ERRUPPR_BUFNUM_SHFT)
+
+#define BRIDGE_RESP_ERRUPPR_DEVICE(x) \
+ (((x) & BRIDGE_RESP_ERRUPPR_DEVNUM_MASK) >> \
+ BRIDGE_RESP_ERRUPPR_DEVNUM_SHFT)
+
+/* Bridge direct mapping register bits definition */
+#define BRIDGE_DIRMAP_W_ID_SHFT 20
+#define BRIDGE_DIRMAP_W_ID (0xf << BRIDGE_DIRMAP_W_ID_SHFT)
+#define BRIDGE_DIRMAP_RMF_64 (0x1 << 18)
+#define BRIDGE_DIRMAP_ADD512 (0x1 << 17)
+#define BRIDGE_DIRMAP_OFF (0x1ffff << 0)
+#define BRIDGE_DIRMAP_OFF_ADDRSHFT (31) /* lsbit of DIRMAP_OFF is xtalk address bit 31 */
+
+/* Bridge Arbitration register bits definition */
+#define BRIDGE_ARB_REQ_WAIT_TICK(x) ((x) << 16)
+#define BRIDGE_ARB_REQ_WAIT_TICK_MASK BRIDGE_ARB_REQ_WAIT_TICK(0x3)
+#define BRIDGE_ARB_REQ_WAIT_EN(x) ((x) << 8)
+#define BRIDGE_ARB_REQ_WAIT_EN_MASK BRIDGE_ARB_REQ_WAIT_EN(0xff)
+#define BRIDGE_ARB_FREEZE_GNT (1 << 6)
+#define BRIDGE_ARB_HPRI_RING_B2 (1 << 5)
+#define BRIDGE_ARB_HPRI_RING_B1 (1 << 4)
+#define BRIDGE_ARB_HPRI_RING_B0 (1 << 3)
+#define BRIDGE_ARB_LPRI_RING_B2 (1 << 2)
+#define BRIDGE_ARB_LPRI_RING_B1 (1 << 1)
+#define BRIDGE_ARB_LPRI_RING_B0 (1 << 0)
+
+/* Bridge Bus time-out register bits definition */
+#define BRIDGE_BUS_PCI_RETRY_HLD(x) ((x) << 16)
+#define BRIDGE_BUS_PCI_RETRY_HLD_MASK BRIDGE_BUS_PCI_RETRY_HLD(0x1f)
+#define BRIDGE_BUS_GIO_TIMEOUT (1 << 12)
+#define BRIDGE_BUS_PCI_RETRY_CNT(x) ((x) << 0)
+#define BRIDGE_BUS_PCI_RETRY_MASK BRIDGE_BUS_PCI_RETRY_CNT(0x3ff)
+
+/* Bridge interrupt status register bits definition */
+#define BRIDGE_ISR_MULTI_ERR (0x1u << 31)
+#define BRIDGE_ISR_PMU_ESIZE_FAULT (0x1 << 30)
+#define BRIDGE_ISR_UNEXP_RESP (0x1 << 29)
+#define BRIDGE_ISR_BAD_XRESP_PKT (0x1 << 28)
+#define BRIDGE_ISR_BAD_XREQ_PKT (0x1 << 27)
+#define BRIDGE_ISR_RESP_XTLK_ERR (0x1 << 26)
+#define BRIDGE_ISR_REQ_XTLK_ERR (0x1 << 25)
+#define BRIDGE_ISR_INVLD_ADDR (0x1 << 24)
+#define BRIDGE_ISR_UNSUPPORTED_XOP (0x1 << 23)
+#define BRIDGE_ISR_XREQ_FIFO_OFLOW (0x1 << 22)
+#define BRIDGE_ISR_LLP_REC_SNERR (0x1 << 21)
+#define BRIDGE_ISR_LLP_REC_CBERR (0x1 << 20)
+#define BRIDGE_ISR_LLP_RCTY (0x1 << 19)
+#define BRIDGE_ISR_LLP_TX_RETRY (0x1 << 18)
+#define BRIDGE_ISR_LLP_TCTY (0x1 << 17)
+#define BRIDGE_ISR_SSRAM_PERR (0x1 << 16)
+#define BRIDGE_ISR_PCI_ABORT (0x1 << 15)
+#define BRIDGE_ISR_PCI_PARITY (0x1 << 14)
+#define BRIDGE_ISR_PCI_SERR (0x1 << 13)
+#define BRIDGE_ISR_PCI_PERR (0x1 << 12)
+#define BRIDGE_ISR_PCI_MST_TIMEOUT (0x1 << 11)
+#define BRIDGE_ISR_GIO_MST_TIMEOUT BRIDGE_ISR_PCI_MST_TIMEOUT
+#define BRIDGE_ISR_PCI_RETRY_CNT (0x1 << 10)
+#define BRIDGE_ISR_XREAD_REQ_TIMEOUT (0x1 << 9)
+#define BRIDGE_ISR_GIO_B_ENBL_ERR (0x1 << 8)
+#define BRIDGE_ISR_INT_MSK (0xff << 0)
+#define BRIDGE_ISR_INT(x) (0x1 << (x))
+
+#define BRIDGE_ISR_LINK_ERROR \
+ (BRIDGE_ISR_LLP_REC_SNERR|BRIDGE_ISR_LLP_REC_CBERR| \
+ BRIDGE_ISR_LLP_RCTY|BRIDGE_ISR_LLP_TX_RETRY| \
+ BRIDGE_ISR_LLP_TCTY)
+
+#define BRIDGE_ISR_PCIBUS_PIOERR \
+ (BRIDGE_ISR_PCI_MST_TIMEOUT|BRIDGE_ISR_PCI_ABORT)
+
+#define BRIDGE_ISR_PCIBUS_ERROR \
+ (BRIDGE_ISR_PCIBUS_PIOERR|BRIDGE_ISR_PCI_PERR| \
+ BRIDGE_ISR_PCI_SERR|BRIDGE_ISR_PCI_RETRY_CNT| \
+ BRIDGE_ISR_PCI_PARITY)
+
+#define BRIDGE_ISR_XTALK_ERROR \
+ (BRIDGE_ISR_XREAD_REQ_TIMEOUT|BRIDGE_ISR_XREQ_FIFO_OFLOW|\
+ BRIDGE_ISR_UNSUPPORTED_XOP|BRIDGE_ISR_INVLD_ADDR| \
+ BRIDGE_ISR_REQ_XTLK_ERR|BRIDGE_ISR_RESP_XTLK_ERR| \
+ BRIDGE_ISR_BAD_XREQ_PKT|BRIDGE_ISR_BAD_XRESP_PKT| \
+ BRIDGE_ISR_UNEXP_RESP)
+
+#define BRIDGE_ISR_ERRORS \
+ (BRIDGE_ISR_LINK_ERROR|BRIDGE_ISR_PCIBUS_ERROR| \
+ BRIDGE_ISR_XTALK_ERROR|BRIDGE_ISR_SSRAM_PERR| \
+ BRIDGE_ISR_PMU_ESIZE_FAULT)
+
+/*
+ * List of Errors which are fatal and kill the system
+ */
+#define BRIDGE_ISR_ERROR_FATAL \
+ ((BRIDGE_ISR_XTALK_ERROR & ~BRIDGE_ISR_XREAD_REQ_TIMEOUT)|\
+ BRIDGE_ISR_PCI_SERR|BRIDGE_ISR_PCI_PARITY )
+
+#define BRIDGE_ISR_ERROR_DUMP \
+ (BRIDGE_ISR_PCIBUS_ERROR|BRIDGE_ISR_PMU_ESIZE_FAULT| \
+ BRIDGE_ISR_XTALK_ERROR|BRIDGE_ISR_SSRAM_PERR)
+
+/* Bridge interrupt enable register bits definition */
+#define BRIDGE_IMR_UNEXP_RESP BRIDGE_ISR_UNEXP_RESP
+#define BRIDGE_IMR_PMU_ESIZE_FAULT BRIDGE_ISR_PMU_ESIZE_FAULT
+#define BRIDGE_IMR_BAD_XRESP_PKT BRIDGE_ISR_BAD_XRESP_PKT
+#define BRIDGE_IMR_BAD_XREQ_PKT BRIDGE_ISR_BAD_XREQ_PKT
+#define BRIDGE_IMR_RESP_XTLK_ERR BRIDGE_ISR_RESP_XTLK_ERR
+#define BRIDGE_IMR_REQ_XTLK_ERR BRIDGE_ISR_REQ_XTLK_ERR
+#define BRIDGE_IMR_INVLD_ADDR BRIDGE_ISR_INVLD_ADDR
+#define BRIDGE_IMR_UNSUPPORTED_XOP BRIDGE_ISR_UNSUPPORTED_XOP
+#define BRIDGE_IMR_XREQ_FIFO_OFLOW BRIDGE_ISR_XREQ_FIFO_OFLOW
+#define BRIDGE_IMR_LLP_REC_SNERR BRIDGE_ISR_LLP_REC_SNERR
+#define BRIDGE_IMR_LLP_REC_CBERR BRIDGE_ISR_LLP_REC_CBERR
+#define BRIDGE_IMR_LLP_RCTY BRIDGE_ISR_LLP_RCTY
+#define BRIDGE_IMR_LLP_TX_RETRY BRIDGE_ISR_LLP_TX_RETRY
+#define BRIDGE_IMR_LLP_TCTY BRIDGE_ISR_LLP_TCTY
+#define BRIDGE_IMR_SSRAM_PERR BRIDGE_ISR_SSRAM_PERR
+#define BRIDGE_IMR_PCI_ABORT BRIDGE_ISR_PCI_ABORT
+#define BRIDGE_IMR_PCI_PARITY BRIDGE_ISR_PCI_PARITY
+#define BRIDGE_IMR_PCI_SERR BRIDGE_ISR_PCI_SERR
+#define BRIDGE_IMR_PCI_PERR BRIDGE_ISR_PCI_PERR
+#define BRIDGE_IMR_PCI_MST_TIMEOUT BRIDGE_ISR_PCI_MST_TIMEOUT
+#define BRIDGE_IMR_GIO_MST_TIMEOUT BRIDGE_ISR_GIO_MST_TIMEOUT
+#define BRIDGE_IMR_PCI_RETRY_CNT BRIDGE_ISR_PCI_RETRY_CNT
+#define BRIDGE_IMR_XREAD_REQ_TIMEOUT BRIDGE_ISR_XREAD_REQ_TIMEOUT
+#define BRIDGE_IMR_GIO_B_ENBL_ERR BRIDGE_ISR_GIO_B_ENBL_ERR
+#define BRIDGE_IMR_INT_MSK BRIDGE_ISR_INT_MSK
+#define BRIDGE_IMR_INT(x) BRIDGE_ISR_INT(x)
+
+/* Bridge interrupt reset register bits definition */
+#define BRIDGE_IRR_MULTI_CLR (0x1 << 6)
+#define BRIDGE_IRR_CRP_GRP_CLR (0x1 << 5)
+#define BRIDGE_IRR_RESP_BUF_GRP_CLR (0x1 << 4)
+#define BRIDGE_IRR_REQ_DSP_GRP_CLR (0x1 << 3)
+#define BRIDGE_IRR_LLP_GRP_CLR (0x1 << 2)
+#define BRIDGE_IRR_SSRAM_GRP_CLR (0x1 << 1)
+#define BRIDGE_IRR_PCI_GRP_CLR (0x1 << 0)
+#define BRIDGE_IRR_GIO_GRP_CLR (0x1 << 0)
+#define BRIDGE_IRR_ALL_CLR 0x7f
+
+#define BRIDGE_IRR_CRP_GRP (BRIDGE_ISR_UNEXP_RESP | \
+ BRIDGE_ISR_XREQ_FIFO_OFLOW)
+#define BRIDGE_IRR_RESP_BUF_GRP (BRIDGE_ISR_BAD_XRESP_PKT | \
+ BRIDGE_ISR_RESP_XTLK_ERR | \
+ BRIDGE_ISR_XREAD_REQ_TIMEOUT)
+#define BRIDGE_IRR_REQ_DSP_GRP (BRIDGE_ISR_UNSUPPORTED_XOP | \
+ BRIDGE_ISR_BAD_XREQ_PKT | \
+ BRIDGE_ISR_REQ_XTLK_ERR | \
+ BRIDGE_ISR_INVLD_ADDR)
+#define BRIDGE_IRR_LLP_GRP (BRIDGE_ISR_LLP_REC_SNERR | \
+ BRIDGE_ISR_LLP_REC_CBERR | \
+ BRIDGE_ISR_LLP_RCTY | \
+ BRIDGE_ISR_LLP_TX_RETRY | \
+ BRIDGE_ISR_LLP_TCTY)
+#define BRIDGE_IRR_SSRAM_GRP (BRIDGE_ISR_SSRAM_PERR | \
+ BRIDGE_ISR_PMU_ESIZE_FAULT)
+#define BRIDGE_IRR_PCI_GRP (BRIDGE_ISR_PCI_ABORT | \
+ BRIDGE_ISR_PCI_PARITY | \
+ BRIDGE_ISR_PCI_SERR | \
+ BRIDGE_ISR_PCI_PERR | \
+ BRIDGE_ISR_PCI_MST_TIMEOUT | \
+ BRIDGE_ISR_PCI_RETRY_CNT)
+
+#define BRIDGE_IRR_GIO_GRP (BRIDGE_ISR_GIO_B_ENBL_ERR | \
+ BRIDGE_ISR_GIO_MST_TIMEOUT)
+
+/* Bridge INT_DEV register bits definition */
+#define BRIDGE_INT_DEV_SHFT(n) ((n)*3)
+#define BRIDGE_INT_DEV_MASK(n) (0x7 << BRIDGE_INT_DEV_SHFT(n))
+#define BRIDGE_INT_DEV_SET(_dev, _line) (_dev << BRIDGE_INT_DEV_SHFT(_line))
+
+/* Bridge interrupt(x) register bits definition */
+#define BRIDGE_INT_ADDR_HOST 0x0003FF00
+#define BRIDGE_INT_ADDR_FLD 0x000000FF
+
+#define BRIDGE_TMO_PCI_RETRY_HLD_MASK 0x1f0000
+#define BRIDGE_TMO_GIO_TIMEOUT_MASK 0x001000
+#define BRIDGE_TMO_PCI_RETRY_CNT_MASK 0x0003ff
+
+#define BRIDGE_TMO_PCI_RETRY_CNT_MAX 0x3ff
+
+/*
+ * The NASID should be shifted by this amount and stored into the
+ * interrupt(x) register.
+ */
+#define BRIDGE_INT_ADDR_NASID_SHFT 8
+
+/*
+ * The BRIDGE_INT_ADDR_DEST_IO bit should be set to send an interrupt to
+ * memory.
+ */
+#define BRIDGE_INT_ADDR_DEST_IO (1 << 17)
+#define BRIDGE_INT_ADDR_DEST_MEM 0
+#define BRIDGE_INT_ADDR_MASK (1 << 17)
+
+/* Bridge device(x) register bits definition */
+#define BRIDGE_DEV_ERR_LOCK_EN 0x10000000
+#define BRIDGE_DEV_PAGE_CHK_DIS 0x08000000
+#define BRIDGE_DEV_FORCE_PCI_PAR 0x04000000
+#define BRIDGE_DEV_VIRTUAL_EN 0x02000000
+#define BRIDGE_DEV_PMU_WRGA_EN 0x01000000
+#define BRIDGE_DEV_DIR_WRGA_EN 0x00800000
+#define BRIDGE_DEV_DEV_SIZE 0x00400000
+#define BRIDGE_DEV_RT 0x00200000
+#define BRIDGE_DEV_SWAP_PMU 0x00100000
+#define BRIDGE_DEV_SWAP_DIR 0x00080000
+#define BRIDGE_DEV_PREF 0x00040000
+#define BRIDGE_DEV_PRECISE 0x00020000
+#define BRIDGE_DEV_COH 0x00010000
+#define BRIDGE_DEV_BARRIER 0x00008000
+#define BRIDGE_DEV_GBR 0x00004000
+#define BRIDGE_DEV_DEV_SWAP 0x00002000
+#define BRIDGE_DEV_DEV_IO_MEM 0x00001000
+#define BRIDGE_DEV_OFF_MASK 0x00000fff
+#define BRIDGE_DEV_OFF_ADDR_SHFT 20
+
+#define BRIDGE_DEV_PMU_BITS (BRIDGE_DEV_PMU_WRGA_EN | \
+ BRIDGE_DEV_SWAP_PMU)
+#define BRIDGE_DEV_D32_BITS (BRIDGE_DEV_DIR_WRGA_EN | \
+ BRIDGE_DEV_SWAP_DIR | \
+ BRIDGE_DEV_PREF | \
+ BRIDGE_DEV_PRECISE | \
+ BRIDGE_DEV_COH | \
+ BRIDGE_DEV_BARRIER)
+#define BRIDGE_DEV_D64_BITS (BRIDGE_DEV_DIR_WRGA_EN | \
+ BRIDGE_DEV_SWAP_DIR | \
+ BRIDGE_DEV_COH | \
+ BRIDGE_DEV_BARRIER)
+
+/* Bridge Error Upper register bit field definition */
+#define BRIDGE_ERRUPPR_DEVMASTER (0x1 << 20) /* Device was master */
+#define BRIDGE_ERRUPPR_PCIVDEV (0x1 << 19) /* Virtual Req value */
+#define BRIDGE_ERRUPPR_DEVNUM_SHFT (16)
+#define BRIDGE_ERRUPPR_DEVNUM_MASK (0x7 << BRIDGE_ERRUPPR_DEVNUM_SHFT)
+#define BRIDGE_ERRUPPR_DEVICE(err) (((err) >> BRIDGE_ERRUPPR_DEVNUM_SHFT) & 0x7)
+#define BRIDGE_ERRUPPR_ADDRMASK (0xFFFF)
+
+/* Bridge interrupt mode register bits definition */
+#define BRIDGE_INTMODE_CLR_PKT_EN(x) (0x1 << (x))
+
+/* this should be written to the xbow's link_control(x) register */
+#define BRIDGE_CREDIT 3
+
+/* RRB assignment register */
+#define BRIDGE_RRB_EN 0x8 /* after shifting down */
+#define BRIDGE_RRB_DEV 0x7 /* after shifting down */
+#define BRIDGE_RRB_VDEV 0x4 /* after shifting down */
+#define BRIDGE_RRB_PDEV 0x3 /* after shifting down */
+
+/* RRB status register */
+#define BRIDGE_RRB_VALID(r) (0x00010000<<(r))
+#define BRIDGE_RRB_INUSE(r) (0x00000001<<(r))
+
+/* RRB clear register */
+#define BRIDGE_RRB_CLEAR(r) (0x00000001<<(r))
+
+/* xbox system controller declarations */
+#define XBOX_BRIDGE_WID 8
+#define FLASH_PROM1_BASE 0xE00000 /* To read the xbox sysctlr status */
+#define XBOX_RPS_EXISTS 1 << 6 /* RPS bit in status register */
+#define XBOX_RPS_FAIL 1 << 4 /* RPS status bit in register */
+
+/* ========================================================================
+ */
+/*
+ * Macros for Xtalk to Bridge bus (PCI/GIO) PIO
+ * refer to section 4.2.1 of Bridge Spec for xtalk to PCI/GIO PIO mappings
+ */
+/* XTALK addresses that map into Bridge Bus addr space */
+#define BRIDGE_PIO32_XTALK_ALIAS_BASE 0x000040000000L
+#define BRIDGE_PIO32_XTALK_ALIAS_LIMIT 0x00007FFFFFFFL
+#define BRIDGE_PIO64_XTALK_ALIAS_BASE 0x000080000000L
+#define BRIDGE_PIO64_XTALK_ALIAS_LIMIT 0x0000BFFFFFFFL
+#define BRIDGE_PCIIO_XTALK_ALIAS_BASE 0x000100000000L
+#define BRIDGE_PCIIO_XTALK_ALIAS_LIMIT 0x0001FFFFFFFFL
+
+/* Ranges of PCI bus space that can be accessed via PIO from xtalk */
+#define BRIDGE_MIN_PIO_ADDR_MEM 0x00000000 /* 1G PCI memory space */
+#define BRIDGE_MAX_PIO_ADDR_MEM 0x3fffffff
+#define BRIDGE_MIN_PIO_ADDR_IO 0x00000000 /* 4G PCI IO space */
+#define BRIDGE_MAX_PIO_ADDR_IO 0xffffffff
+
+/* XTALK addresses that map into PCI addresses */
+#define BRIDGE_PCI_MEM32_BASE BRIDGE_PIO32_XTALK_ALIAS_BASE
+#define BRIDGE_PCI_MEM32_LIMIT BRIDGE_PIO32_XTALK_ALIAS_LIMIT
+#define BRIDGE_PCI_MEM64_BASE BRIDGE_PIO64_XTALK_ALIAS_BASE
+#define BRIDGE_PCI_MEM64_LIMIT BRIDGE_PIO64_XTALK_ALIAS_LIMIT
+#define BRIDGE_PCI_IO_BASE BRIDGE_PCIIO_XTALK_ALIAS_BASE
+#define BRIDGE_PCI_IO_LIMIT BRIDGE_PCIIO_XTALK_ALIAS_LIMIT
+
+/*
+ * Macros for Bridge bus (PCI/GIO) to Xtalk DMA
+ */
+/* Bridge Bus DMA addresses */
+#define BRIDGE_LOCAL_BASE 0
+#define BRIDGE_DMA_MAPPED_BASE 0x40000000
+#define BRIDGE_DMA_MAPPED_SIZE 0x40000000 /* 1G Bytes */
+#define BRIDGE_DMA_DIRECT_BASE 0x80000000
+#define BRIDGE_DMA_DIRECT_SIZE 0x80000000 /* 2G Bytes */
+
+#define PCI32_LOCAL_BASE BRIDGE_LOCAL_BASE
+
+/* PCI addresses of regions decoded by Bridge for DMA */
+#define PCI32_MAPPED_BASE BRIDGE_DMA_MAPPED_BASE
+#define PCI32_DIRECT_BASE BRIDGE_DMA_DIRECT_BASE
+
+#define IS_PCI32_LOCAL(x) ((ulong_t)(x) < PCI32_MAPPED_BASE)
+#define IS_PCI32_MAPPED(x) ((ulong_t)(x) < PCI32_DIRECT_BASE && \
+ (ulong_t)(x) >= PCI32_MAPPED_BASE)
+#define IS_PCI32_DIRECT(x) ((ulong_t)(x) >= PCI32_MAPPED_BASE)
+#define IS_PCI64(x) ((ulong_t)(x) >= PCI64_BASE)
+
+/*
+ * The GIO address space.
+ */
+/* Xtalk to GIO PIO */
+#define BRIDGE_GIO_MEM32_BASE BRIDGE_PIO32_XTALK_ALIAS_BASE
+#define BRIDGE_GIO_MEM32_LIMIT BRIDGE_PIO32_XTALK_ALIAS_LIMIT
+
+#define GIO_LOCAL_BASE BRIDGE_LOCAL_BASE
+
+/* GIO addresses of regions decoded by Bridge for DMA */
+#define GIO_MAPPED_BASE BRIDGE_DMA_MAPPED_BASE
+#define GIO_DIRECT_BASE BRIDGE_DMA_DIRECT_BASE
+
+#define IS_GIO_LOCAL(x) ((ulong_t)(x) < GIO_MAPPED_BASE)
+#define IS_GIO_MAPPED(x) ((ulong_t)(x) < GIO_DIRECT_BASE && \
+ (ulong_t)(x) >= GIO_MAPPED_BASE)
+#define IS_GIO_DIRECT(x) ((ulong_t)(x) >= GIO_MAPPED_BASE)
+
+/* PCI to xtalk mapping */
+
+/* given a DIR_OFF value and a pci/gio 32 bits direct address, determine
+ * which xtalk address is accessed
+ */
+#define BRIDGE_DIRECT_32_SEG_SIZE BRIDGE_DMA_DIRECT_SIZE
+#define BRIDGE_DIRECT_32_TO_XTALK(dir_off,adr) \
+ ((dir_off) * BRIDGE_DIRECT_32_SEG_SIZE + \
+ ((adr) & (BRIDGE_DIRECT_32_SEG_SIZE - 1)) + PHYS_RAMBASE)
+
+/* 64-bit address attribute masks */
+#define PCI64_ATTR_TARG_MASK 0xf000000000000000
+#define PCI64_ATTR_TARG_SHFT 60
+#define PCI64_ATTR_PREF 0x0800000000000000
+#define PCI64_ATTR_PREC 0x0400000000000000
+#define PCI64_ATTR_VIRTUAL 0x0200000000000000
+#define PCI64_ATTR_BAR 0x0100000000000000
+#define PCI64_ATTR_RMF_MASK 0x00ff000000000000
+#define PCI64_ATTR_RMF_SHFT 48
+
+#ifndef __ASSEMBLY__
+/* Address translation entry for mapped pci32 accesses */
+typedef union ate_u {
+ u64 ent;
+ struct ate_s {
+ u64 rmf:16;
+ u64 addr:36;
+ u64 targ:4;
+ u64 reserved:3;
+ u64 barrier:1;
+ u64 prefetch:1;
+ u64 precise:1;
+ u64 coherent:1;
+ u64 valid:1;
+ } field;
+} ate_t;
+#endif /* !__ASSEMBLY__ */
+
+#define ATE_V 0x01
+#define ATE_CO 0x02
+#define ATE_PREC 0x04
+#define ATE_PREF 0x08
+#define ATE_BAR 0x10
+
+#define ATE_PFNSHIFT 12
+#define ATE_TIDSHIFT 8
+#define ATE_RMFSHIFT 48
+
+#define mkate(xaddr, xid, attr) ((xaddr) & 0x0000fffffffff000ULL) | \
+ ((xid)<<ATE_TIDSHIFT) | \
+ (attr)
+
+#define BRIDGE_INTERNAL_ATES 128
+
+struct bridge_controller {
+ struct pci_controller pc;
+ struct resource mem;
+ struct resource io;
+ bridge_t *base;
+ nasid_t nasid;
+ unsigned int widget_id;
+ unsigned int irq_cpu;
+ dma64_addr_t baddr;
+ unsigned int pci_int[8];
+};
+
+#define BRIDGE_CONTROLLER(bus) \
+ ((struct bridge_controller *)((bus)->sysdata))
+
+extern void register_bridge_irq(unsigned int irq);
+extern int request_bridge_irq(struct bridge_controller *bc);
+
+extern struct pci_ops bridge_pci_ops;
+
+#endif /* _ASM_PCI_BRIDGE_H */
diff --git a/arch/mips/include/asm/percpu.h b/arch/mips/include/asm/percpu.h
new file mode 100644
index 00000000000..844e763e933
--- /dev/null
+++ b/arch/mips/include/asm/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_PERCPU_H
+#define __ASM_PERCPU_H
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ASM_PERCPU_H */
diff --git a/arch/mips/include/asm/pgalloc.h b/arch/mips/include/asm/pgalloc.h
new file mode 100644
index 00000000000..1275831dda2
--- /dev/null
+++ b/arch/mips/include/asm/pgalloc.h
@@ -0,0 +1,143 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 2001, 2003 by Ralf Baechle
+ * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_PGALLOC_H
+#define _ASM_PGALLOC_H
+
+#include <linux/highmem.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+
+static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
+ pte_t *pte)
+{
+ set_pmd(pmd, __pmd((unsigned long)pte));
+}
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
+ pgtable_t pte)
+{
+ set_pmd(pmd, __pmd((unsigned long)page_address(pte)));
+}
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+/*
+ * Initialize a new pmd table with invalid pointers.
+ */
+extern void pmd_init(unsigned long page, unsigned long pagetable);
+
+#ifdef CONFIG_64BIT
+
+static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
+{
+ set_pud(pud, __pud((unsigned long)pmd));
+}
+#endif
+
+/*
+ * Initialize a new pgd / pmd table with invalid pointers.
+ */
+extern void pgd_init(unsigned long page);
+
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+ pgd_t *ret, *init;
+
+ ret = (pgd_t *) __get_free_pages(GFP_KERNEL, PGD_ORDER);
+ if (ret) {
+ init = pgd_offset(&init_mm, 0UL);
+ pgd_init((unsigned long)ret);
+ memcpy(ret + USER_PTRS_PER_PGD, init + USER_PTRS_PER_PGD,
+ (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
+ }
+
+ return ret;
+}
+
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+ free_pages((unsigned long)pgd, PGD_ORDER);
+}
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+ unsigned long address)
+{
+ pte_t *pte;
+
+ pte = (pte_t *) __get_free_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, PTE_ORDER);
+
+ return pte;
+}
+
+static inline struct page *pte_alloc_one(struct mm_struct *mm,
+ unsigned long address)
+{
+ struct page *pte;
+
+ pte = alloc_pages(GFP_KERNEL | __GFP_REPEAT, PTE_ORDER);
+ if (pte) {
+ clear_highpage(pte);
+ pgtable_page_ctor(pte);
+ }
+ return pte;
+}
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+ free_pages((unsigned long)pte, PTE_ORDER);
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
+{
+ pgtable_page_dtor(pte);
+ __free_pages(pte, PTE_ORDER);
+}
+
+#define __pte_free_tlb(tlb,pte) \
+do { \
+ pgtable_page_dtor(pte); \
+ tlb_remove_page((tlb), pte); \
+} while (0)
+
+#ifdef CONFIG_32BIT
+
+/*
+ * allocating and freeing a pmd is trivial: the 1-entry pmd is
+ * inside the pgd, so has no extra memory associated with it.
+ */
+#define pmd_free(mm, x) do { } while (0)
+#define __pmd_free_tlb(tlb, x) do { } while (0)
+
+#endif
+
+#ifdef CONFIG_64BIT
+
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+ pmd_t *pmd;
+
+ pmd = (pmd_t *) __get_free_pages(GFP_KERNEL|__GFP_REPEAT, PMD_ORDER);
+ if (pmd)
+ pmd_init((unsigned long)pmd, (unsigned long)invalid_pte_table);
+ return pmd;
+}
+
+static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+ free_pages((unsigned long)pmd, PMD_ORDER);
+}
+
+#define __pmd_free_tlb(tlb, x) pmd_free((tlb)->mm, x)
+
+#endif
+
+#define check_pgt_cache() do { } while (0)
+
+extern void pagetable_init(void);
+
+#endif /* _ASM_PGALLOC_H */
diff --git a/arch/mips/include/asm/pgtable-32.h b/arch/mips/include/asm/pgtable-32.h
new file mode 100644
index 00000000000..55813d6150c
--- /dev/null
+++ b/arch/mips/include/asm/pgtable-32.h
@@ -0,0 +1,234 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 2003 Ralf Baechle
+ * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_PGTABLE_32_H
+#define _ASM_PGTABLE_32_H
+
+#include <asm/addrspace.h>
+#include <asm/page.h>
+
+#include <linux/linkage.h>
+#include <asm/cachectl.h>
+#include <asm/fixmap.h>
+
+#include <asm-generic/pgtable-nopmd.h>
+
+/*
+ * - add_wired_entry() add a fixed TLB entry, and move wired register
+ */
+extern void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
+ unsigned long entryhi, unsigned long pagemask);
+
+/*
+ * - add_temporary_entry() add a temporary TLB entry. We use TLB entries
+ * starting at the top and working down. This is for populating the
+ * TLB before trap_init() puts the TLB miss handler in place. It
+ * should be used only for entries matching the actual page tables,
+ * to prevent inconsistencies.
+ */
+extern int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
+ unsigned long entryhi, unsigned long pagemask);
+
+
+/* Basically we have the same two-level (which is the logical three level
+ * Linux page table layout folded) page tables as the i386. Some day
+ * when we have proper page coloring support we can have a 1% quicker
+ * tlb refill handling mechanism, but for now it is a bit slower but
+ * works even with the cache aliasing problem the R4k and above have.
+ */
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define PGDIR_SHIFT (2 * PAGE_SHIFT + PTE_ORDER - PTE_T_LOG2)
+#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
+#define PGDIR_MASK (~(PGDIR_SIZE-1))
+
+/*
+ * Entries per page directory level: we use two-level, so
+ * we don't really have any PUD/PMD directory physically.
+ */
+#define __PGD_ORDER (32 - 3 * PAGE_SHIFT + PGD_T_LOG2 + PTE_T_LOG2)
+#define PGD_ORDER (__PGD_ORDER >= 0 ? __PGD_ORDER : 0)
+#define PUD_ORDER aieeee_attempt_to_allocate_pud
+#define PMD_ORDER 1
+#define PTE_ORDER 0
+
+#define PTRS_PER_PGD (USER_PTRS_PER_PGD * 2)
+#define PTRS_PER_PTE ((PAGE_SIZE << PTE_ORDER) / sizeof(pte_t))
+
+#define USER_PTRS_PER_PGD (0x80000000UL/PGDIR_SIZE)
+#define FIRST_USER_ADDRESS 0
+
+#define VMALLOC_START MAP_BASE
+
+#define PKMAP_BASE (0xfe000000UL)
+
+#ifdef CONFIG_HIGHMEM
+# define VMALLOC_END (PKMAP_BASE-2*PAGE_SIZE)
+#else
+# define VMALLOC_END (FIXADDR_START-2*PAGE_SIZE)
+#endif
+
+#ifdef CONFIG_64BIT_PHYS_ADDR
+#define pte_ERROR(e) \
+ printk("%s:%d: bad pte %016Lx.\n", __FILE__, __LINE__, pte_val(e))
+#else
+#define pte_ERROR(e) \
+ printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+#endif
+#define pgd_ERROR(e) \
+ printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+extern void load_pgd(unsigned long pg_dir);
+
+extern pte_t invalid_pte_table[PAGE_SIZE/sizeof(pte_t)];
+
+/*
+ * Empty pgd/pmd entries point to the invalid_pte_table.
+ */
+static inline int pmd_none(pmd_t pmd)
+{
+ return pmd_val(pmd) == (unsigned long) invalid_pte_table;
+}
+
+#define pmd_bad(pmd) (pmd_val(pmd) & ~PAGE_MASK)
+
+static inline int pmd_present(pmd_t pmd)
+{
+ return pmd_val(pmd) != (unsigned long) invalid_pte_table;
+}
+
+static inline void pmd_clear(pmd_t *pmdp)
+{
+ pmd_val(*pmdp) = ((unsigned long) invalid_pte_table);
+}
+
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#define pte_page(x) pfn_to_page(pte_pfn(x))
+#define pte_pfn(x) ((unsigned long)((x).pte_high >> 6))
+static inline pte_t
+pfn_pte(unsigned long pfn, pgprot_t prot)
+{
+ pte_t pte;
+ pte.pte_high = (pfn << 6) | (pgprot_val(prot) & 0x3f);
+ pte.pte_low = pgprot_val(prot);
+ return pte;
+}
+
+#else
+
+#define pte_page(x) pfn_to_page(pte_pfn(x))
+
+#ifdef CONFIG_CPU_VR41XX
+#define pte_pfn(x) ((unsigned long)((x).pte >> (PAGE_SHIFT + 2)))
+#define pfn_pte(pfn, prot) __pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot))
+#else
+#define pte_pfn(x) ((unsigned long)((x).pte >> PAGE_SHIFT))
+#define pfn_pte(pfn, prot) __pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#endif
+#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */
+
+#define __pgd_offset(address) pgd_index(address)
+#define __pud_offset(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
+#define __pmd_offset(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+
+/* to find an entry in a page-table-directory */
+#define pgd_offset(mm, addr) ((mm)->pgd + pgd_index(addr))
+
+/* Find an entry in the third-level page table.. */
+#define __pte_offset(address) \
+ (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset(dir, address) \
+ ((pte_t *) pmd_page_vaddr(*(dir)) + __pte_offset(address))
+#define pte_offset_kernel(dir, address) \
+ ((pte_t *) pmd_page_vaddr(*(dir)) + __pte_offset(address))
+
+#define pte_offset_map(dir, address) \
+ ((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address))
+#define pte_offset_map_nested(dir, address) \
+ ((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address))
+#define pte_unmap(pte) ((void)(pte))
+#define pte_unmap_nested(pte) ((void)(pte))
+
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+
+/* Swap entries must have VALID bit cleared. */
+#define __swp_type(x) (((x).val >> 10) & 0x1f)
+#define __swp_offset(x) ((x).val >> 15)
+#define __swp_entry(type,offset) \
+ ((swp_entry_t) { ((type) << 10) | ((offset) << 15) })
+
+/*
+ * Bits 0, 4, 8, and 9 are taken, split up 28 bits of offset into this range:
+ */
+#define PTE_FILE_MAX_BITS 28
+
+#define pte_to_pgoff(_pte) ((((_pte).pte >> 1 ) & 0x07) | \
+ (((_pte).pte >> 2 ) & 0x38) | \
+ (((_pte).pte >> 10) << 6 ))
+
+#define pgoff_to_pte(off) ((pte_t) { (((off) & 0x07) << 1 ) | \
+ (((off) & 0x38) << 2 ) | \
+ (((off) >> 6 ) << 10) | \
+ _PAGE_FILE })
+
+#else
+
+/* Swap entries must have VALID and GLOBAL bits cleared. */
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#define __swp_type(x) (((x).val >> 2) & 0x1f)
+#define __swp_offset(x) ((x).val >> 7)
+#define __swp_entry(type,offset) \
+ ((swp_entry_t) { ((type) << 2) | ((offset) << 7) })
+#else
+#define __swp_type(x) (((x).val >> 8) & 0x1f)
+#define __swp_offset(x) ((x).val >> 13)
+#define __swp_entry(type,offset) \
+ ((swp_entry_t) { ((type) << 8) | ((offset) << 13) })
+#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */
+
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+/*
+ * Bits 0 and 1 of pte_high are taken, use the rest for the page offset...
+ */
+#define PTE_FILE_MAX_BITS 30
+
+#define pte_to_pgoff(_pte) ((_pte).pte_high >> 2)
+#define pgoff_to_pte(off) ((pte_t) { _PAGE_FILE, (off) << 2 })
+
+#else
+/*
+ * Bits 0, 4, 6, and 7 are taken, split up 28 bits of offset into this range:
+ */
+#define PTE_FILE_MAX_BITS 28
+
+#define pte_to_pgoff(_pte) ((((_pte).pte >> 1) & 0x7) | \
+ (((_pte).pte >> 2) & 0x8) | \
+ (((_pte).pte >> 8) << 4))
+
+#define pgoff_to_pte(off) ((pte_t) { (((off) & 0x7) << 1) | \
+ (((off) & 0x8) << 2) | \
+ (((off) >> 4) << 8) | \
+ _PAGE_FILE })
+#endif
+
+#endif
+
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { (pte).pte_high })
+#define __swp_entry_to_pte(x) ((pte_t) { 0, (x).val })
+#else
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
+#endif
+
+#endif /* _ASM_PGTABLE_32_H */
diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h
new file mode 100644
index 00000000000..943515f0ef8
--- /dev/null
+++ b/arch/mips/include/asm/pgtable-64.h
@@ -0,0 +1,253 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 2003 Ralf Baechle
+ * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_PGTABLE_64_H
+#define _ASM_PGTABLE_64_H
+
+#include <linux/linkage.h>
+
+#include <asm/addrspace.h>
+#include <asm/page.h>
+#include <asm/cachectl.h>
+#include <asm/fixmap.h>
+
+#include <asm-generic/pgtable-nopud.h>
+
+/*
+ * Each address space has 2 4K pages as its page directory, giving 1024
+ * (== PTRS_PER_PGD) 8 byte pointers to pmd tables. Each pmd table is a
+ * single 4K page, giving 512 (== PTRS_PER_PMD) 8 byte pointers to page
+ * tables. Each page table is also a single 4K page, giving 512 (==
+ * PTRS_PER_PTE) 8 byte ptes. Each pud entry is initialized to point to
+ * invalid_pmd_table, each pmd entry is initialized to point to
+ * invalid_pte_table, each pte is initialized to 0. When memory is low,
+ * and a pmd table or a page table allocation fails, empty_bad_pmd_table
+ * and empty_bad_page_table is returned back to higher layer code, so
+ * that the failure is recognized later on. Linux does not seem to
+ * handle these failures very well though. The empty_bad_page_table has
+ * invalid pte entries in it, to force page faults.
+ *
+ * Kernel mappings: kernel mappings are held in the swapper_pg_table.
+ * The layout is identical to userspace except it's indexed with the
+ * fault address - VMALLOC_START.
+ */
+
+/* PMD_SHIFT determines the size of the area a second-level page table can map */
+#define PMD_SHIFT (PAGE_SHIFT + (PAGE_SHIFT + PTE_ORDER - 3))
+#define PMD_SIZE (1UL << PMD_SHIFT)
+#define PMD_MASK (~(PMD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define PGDIR_SHIFT (PMD_SHIFT + (PAGE_SHIFT + PMD_ORDER - 3))
+#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
+#define PGDIR_MASK (~(PGDIR_SIZE-1))
+
+/*
+ * For 4kB page size we use a 3 level page tree and an 8kB pud, which
+ * permits us mapping 40 bits of virtual address space.
+ *
+ * We used to implement 41 bits by having an order 1 pmd level but that seemed
+ * rather pointless.
+ *
+ * For 8kB page size we use a 3 level page tree which permits a total of
+ * 8TB of address space. Alternatively a 33-bit / 8GB organization using
+ * two levels would be easy to implement.
+ *
+ * For 16kB page size we use a 2 level page tree which permits a total of
+ * 36 bits of virtual address space. We could add a third level but it seems
+ * like at the moment there's no need for this.
+ *
+ * For 64kB page size we use a 2 level page table tree for a total of 42 bits
+ * of virtual address space.
+ */
+#ifdef CONFIG_PAGE_SIZE_4KB
+#define PGD_ORDER 1
+#define PUD_ORDER aieeee_attempt_to_allocate_pud
+#define PMD_ORDER 0
+#define PTE_ORDER 0
+#endif
+#ifdef CONFIG_PAGE_SIZE_8KB
+#define PGD_ORDER 0
+#define PUD_ORDER aieeee_attempt_to_allocate_pud
+#define PMD_ORDER 0
+#define PTE_ORDER 0
+#endif
+#ifdef CONFIG_PAGE_SIZE_16KB
+#define PGD_ORDER 0
+#define PUD_ORDER aieeee_attempt_to_allocate_pud
+#define PMD_ORDER 0
+#define PTE_ORDER 0
+#endif
+#ifdef CONFIG_PAGE_SIZE_64KB
+#define PGD_ORDER 0
+#define PUD_ORDER aieeee_attempt_to_allocate_pud
+#define PMD_ORDER 0
+#define PTE_ORDER 0
+#endif
+
+#define PTRS_PER_PGD ((PAGE_SIZE << PGD_ORDER) / sizeof(pgd_t))
+#define PTRS_PER_PMD ((PAGE_SIZE << PMD_ORDER) / sizeof(pmd_t))
+#define PTRS_PER_PTE ((PAGE_SIZE << PTE_ORDER) / sizeof(pte_t))
+
+#if PGDIR_SIZE >= TASK_SIZE
+#define USER_PTRS_PER_PGD (1)
+#else
+#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE)
+#endif
+#define FIRST_USER_ADDRESS 0UL
+
+#define VMALLOC_START MAP_BASE
+#define VMALLOC_END \
+ (VMALLOC_START + PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE)
+#if defined(CONFIG_MODULES) && defined(KBUILD_64BIT_SYM32) && \
+ VMALLOC_START != CKSSEG
+/* Load modules into 32bit-compatible segment. */
+#define MODULE_START CKSSEG
+#define MODULE_END (FIXADDR_START-2*PAGE_SIZE)
+extern pgd_t module_pg_dir[PTRS_PER_PGD];
+#endif
+
+#define pte_ERROR(e) \
+ printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+ printk("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pgd_ERROR(e) \
+ printk("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+extern pte_t invalid_pte_table[PTRS_PER_PTE];
+extern pte_t empty_bad_page_table[PTRS_PER_PTE];
+extern pmd_t invalid_pmd_table[PTRS_PER_PMD];
+extern pmd_t empty_bad_pmd_table[PTRS_PER_PMD];
+
+/*
+ * Empty pgd/pmd entries point to the invalid_pte_table.
+ */
+static inline int pmd_none(pmd_t pmd)
+{
+ return pmd_val(pmd) == (unsigned long) invalid_pte_table;
+}
+
+#define pmd_bad(pmd) (pmd_val(pmd) & ~PAGE_MASK)
+
+static inline int pmd_present(pmd_t pmd)
+{
+ return pmd_val(pmd) != (unsigned long) invalid_pte_table;
+}
+
+static inline void pmd_clear(pmd_t *pmdp)
+{
+ pmd_val(*pmdp) = ((unsigned long) invalid_pte_table);
+}
+
+/*
+ * Empty pud entries point to the invalid_pmd_table.
+ */
+static inline int pud_none(pud_t pud)
+{
+ return pud_val(pud) == (unsigned long) invalid_pmd_table;
+}
+
+static inline int pud_bad(pud_t pud)
+{
+ return pud_val(pud) & ~PAGE_MASK;
+}
+
+static inline int pud_present(pud_t pud)
+{
+ return pud_val(pud) != (unsigned long) invalid_pmd_table;
+}
+
+static inline void pud_clear(pud_t *pudp)
+{
+ pud_val(*pudp) = ((unsigned long) invalid_pmd_table);
+}
+
+#define pte_page(x) pfn_to_page(pte_pfn(x))
+
+#ifdef CONFIG_CPU_VR41XX
+#define pte_pfn(x) ((unsigned long)((x).pte >> (PAGE_SHIFT + 2)))
+#define pfn_pte(pfn, prot) __pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot))
+#else
+#define pte_pfn(x) ((unsigned long)((x).pte >> PAGE_SHIFT))
+#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#endif
+
+#define __pgd_offset(address) pgd_index(address)
+#define __pud_offset(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
+#define __pmd_offset(address) pmd_index(address)
+
+/* to find an entry in a kernel page-table-directory */
+#ifdef MODULE_START
+#define pgd_offset_k(address) \
+ ((address) >= MODULE_START ? module_pg_dir : pgd_offset(&init_mm, 0UL))
+#else
+#define pgd_offset_k(address) pgd_offset(&init_mm, 0UL)
+#endif
+
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+#define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+
+/* to find an entry in a page-table-directory */
+#define pgd_offset(mm, addr) ((mm)->pgd + pgd_index(addr))
+
+static inline unsigned long pud_page_vaddr(pud_t pud)
+{
+ return pud_val(pud);
+}
+#define pud_phys(pud) virt_to_phys((void *)pud_val(pud))
+#define pud_page(pud) (pfn_to_page(pud_phys(pud) >> PAGE_SHIFT))
+
+/* Find an entry in the second-level page table.. */
+static inline pmd_t *pmd_offset(pud_t * pud, unsigned long address)
+{
+ return (pmd_t *) pud_page_vaddr(*pud) + pmd_index(address);
+}
+
+/* Find an entry in the third-level page table.. */
+#define __pte_offset(address) \
+ (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset(dir, address) \
+ ((pte_t *) pmd_page_vaddr(*(dir)) + __pte_offset(address))
+#define pte_offset_kernel(dir, address) \
+ ((pte_t *) pmd_page_vaddr(*(dir)) + __pte_offset(address))
+#define pte_offset_map(dir, address) \
+ ((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address))
+#define pte_offset_map_nested(dir, address) \
+ ((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address))
+#define pte_unmap(pte) ((void)(pte))
+#define pte_unmap_nested(pte) ((void)(pte))
+
+/*
+ * Initialize a new pgd / pmd table with invalid pointers.
+ */
+extern void pgd_init(unsigned long page);
+extern void pmd_init(unsigned long page, unsigned long pagetable);
+
+/*
+ * Non-present pages: high 24 bits are offset, next 8 bits type,
+ * low 32 bits zero.
+ */
+static inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
+{ pte_t pte; pte_val(pte) = (type << 32) | (offset << 40); return pte; }
+
+#define __swp_type(x) (((x).val >> 32) & 0xff)
+#define __swp_offset(x) ((x).val >> 40)
+#define __swp_entry(type, offset) ((swp_entry_t) { pte_val(mk_swap_pte((type), (offset))) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
+
+/*
+ * Bits 0, 4, 6, and 7 are taken. Let's leave bits 1, 2, 3, and 5 alone to
+ * make things easier, and only use the upper 56 bits for the page offset...
+ */
+#define PTE_FILE_MAX_BITS 56
+
+#define pte_to_pgoff(_pte) ((_pte).pte >> 8)
+#define pgoff_to_pte(off) ((pte_t) { ((off) << 8) | _PAGE_FILE })
+
+#endif /* _ASM_PGTABLE_64_H */
diff --git a/arch/mips/include/asm/pgtable-bits.h b/arch/mips/include/asm/pgtable-bits.h
new file mode 100644
index 00000000000..51b34a48c84
--- /dev/null
+++ b/arch/mips/include/asm/pgtable-bits.h
@@ -0,0 +1,137 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 2002 by Ralf Baechle
+ * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc.
+ * Copyright (C) 2002 Maciej W. Rozycki
+ */
+#ifndef _ASM_PGTABLE_BITS_H
+#define _ASM_PGTABLE_BITS_H
+
+
+/*
+ * Note that we shift the lower 32bits of each EntryLo[01] entry
+ * 6 bits to the left. That way we can convert the PFN into the
+ * physical address by a single 'and' operation and gain 6 additional
+ * bits for storing information which isn't present in a normal
+ * MIPS page table.
+ *
+ * Similar to the Alpha port, we need to keep track of the ref
+ * and mod bits in software. We have a software "yeah you can read
+ * from this page" bit, and a hardware one which actually lets the
+ * process read from the page. On the same token we have a software
+ * writable bit and the real hardware one which actually lets the
+ * process write to the page, this keeps a mod bit via the hardware
+ * dirty bit.
+ *
+ * Certain revisions of the R4000 and R5000 have a bug where if a
+ * certain sequence occurs in the last 3 instructions of an executable
+ * page, and the following page is not mapped, the cpu can do
+ * unpredictable things. The code (when it is written) to deal with
+ * this problem will be in the update_mmu_cache() code for the r4k.
+ */
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+
+#define _PAGE_PRESENT (1<<6) /* implemented in software */
+#define _PAGE_READ (1<<7) /* implemented in software */
+#define _PAGE_WRITE (1<<8) /* implemented in software */
+#define _PAGE_ACCESSED (1<<9) /* implemented in software */
+#define _PAGE_MODIFIED (1<<10) /* implemented in software */
+#define _PAGE_FILE (1<<10) /* set:pagecache unset:swap */
+
+#define _PAGE_R4KBUG (1<<0) /* workaround for r4k bug */
+#define _PAGE_GLOBAL (1<<0)
+#define _PAGE_VALID (1<<1)
+#define _PAGE_SILENT_READ (1<<1) /* synonym */
+#define _PAGE_DIRTY (1<<2) /* The MIPS dirty bit */
+#define _PAGE_SILENT_WRITE (1<<2)
+#define _CACHE_SHIFT 3
+#define _CACHE_MASK (7<<3)
+
+#else
+
+#define _PAGE_PRESENT (1<<0) /* implemented in software */
+#define _PAGE_READ (1<<1) /* implemented in software */
+#define _PAGE_WRITE (1<<2) /* implemented in software */
+#define _PAGE_ACCESSED (1<<3) /* implemented in software */
+#define _PAGE_MODIFIED (1<<4) /* implemented in software */
+#define _PAGE_FILE (1<<4) /* set:pagecache unset:swap */
+
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+
+#define _PAGE_GLOBAL (1<<8)
+#define _PAGE_VALID (1<<9)
+#define _PAGE_SILENT_READ (1<<9) /* synonym */
+#define _PAGE_DIRTY (1<<10) /* The MIPS dirty bit */
+#define _PAGE_SILENT_WRITE (1<<10)
+#define _CACHE_UNCACHED (1<<11)
+#define _CACHE_MASK (1<<11)
+
+#else
+
+#define _PAGE_R4KBUG (1<<5) /* workaround for r4k bug */
+#define _PAGE_GLOBAL (1<<6)
+#define _PAGE_VALID (1<<7)
+#define _PAGE_SILENT_READ (1<<7) /* synonym */
+#define _PAGE_DIRTY (1<<8) /* The MIPS dirty bit */
+#define _PAGE_SILENT_WRITE (1<<8)
+#define _CACHE_SHIFT 9
+#define _CACHE_MASK (7<<9)
+
+#endif
+#endif /* defined(CONFIG_64BIT_PHYS_ADDR && defined(CONFIG_CPU_MIPS32) */
+
+
+/*
+ * Cache attributes
+ */
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+
+#define _CACHE_CACHABLE_NONCOHERENT 0
+
+#elif defined(CONFIG_CPU_SB1)
+
+/* No penalty for being coherent on the SB1, so just
+ use it for "noncoherent" spaces, too. Shouldn't hurt. */
+
+#define _CACHE_UNCACHED (2<<_CACHE_SHIFT)
+#define _CACHE_CACHABLE_COW (5<<_CACHE_SHIFT)
+#define _CACHE_CACHABLE_NONCOHERENT (5<<_CACHE_SHIFT)
+#define _CACHE_UNCACHED_ACCELERATED (7<<_CACHE_SHIFT)
+
+#elif defined(CONFIG_CPU_RM9000)
+
+#define _CACHE_WT (0<<_CACHE_SHIFT)
+#define _CACHE_WTWA (1<<_CACHE_SHIFT)
+#define _CACHE_UC_B (2<<_CACHE_SHIFT)
+#define _CACHE_WB (3<<_CACHE_SHIFT)
+#define _CACHE_CWBEA (4<<_CACHE_SHIFT)
+#define _CACHE_CWB (5<<_CACHE_SHIFT)
+#define _CACHE_UCNB (6<<_CACHE_SHIFT)
+#define _CACHE_FPC (7<<_CACHE_SHIFT)
+
+#define _CACHE_UNCACHED _CACHE_UC_B
+#define _CACHE_CACHABLE_NONCOHERENT _CACHE_WB
+
+#else
+
+#define _CACHE_CACHABLE_NO_WA (0<<_CACHE_SHIFT) /* R4600 only */
+#define _CACHE_CACHABLE_WA (1<<_CACHE_SHIFT) /* R4600 only */
+#define _CACHE_UNCACHED (2<<_CACHE_SHIFT) /* R4[0246]00 */
+#define _CACHE_CACHABLE_NONCOHERENT (3<<_CACHE_SHIFT) /* R4[0246]00 */
+#define _CACHE_CACHABLE_CE (4<<_CACHE_SHIFT) /* R4[04]00MC only */
+#define _CACHE_CACHABLE_COW (5<<_CACHE_SHIFT) /* R4[04]00MC only */
+#define _CACHE_CACHABLE_COHERENT (5<<_CACHE_SHIFT) /* MIPS32R2 CMP */
+#define _CACHE_CACHABLE_CUW (6<<_CACHE_SHIFT) /* R4[04]00MC only */
+#define _CACHE_UNCACHED_ACCELERATED (7<<_CACHE_SHIFT) /* R10000 only */
+
+#endif
+
+#define __READABLE (_PAGE_READ | _PAGE_SILENT_READ | _PAGE_ACCESSED)
+#define __WRITEABLE (_PAGE_WRITE | _PAGE_SILENT_WRITE | _PAGE_MODIFIED)
+
+#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED | _CACHE_MASK)
+
+#endif /* _ASM_PGTABLE_BITS_H */
diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
new file mode 100644
index 00000000000..6a0edf72ffb
--- /dev/null
+++ b/arch/mips/include/asm/pgtable.h
@@ -0,0 +1,383 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Ralf Baechle
+ */
+#ifndef _ASM_PGTABLE_H
+#define _ASM_PGTABLE_H
+
+#ifdef CONFIG_32BIT
+#include <asm/pgtable-32.h>
+#endif
+#ifdef CONFIG_64BIT
+#include <asm/pgtable-64.h>
+#endif
+
+#include <asm/io.h>
+#include <asm/pgtable-bits.h>
+
+struct mm_struct;
+struct vm_area_struct;
+
+#define PAGE_NONE __pgprot(_PAGE_PRESENT | _CACHE_CACHABLE_NONCOHERENT)
+#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
+ _page_cachable_default)
+#define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_READ | \
+ _page_cachable_default)
+#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_READ | \
+ _page_cachable_default)
+#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | __READABLE | __WRITEABLE | \
+ _PAGE_GLOBAL | _page_cachable_default)
+#define PAGE_USERIO __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
+ _page_cachable_default)
+#define PAGE_KERNEL_UNCACHED __pgprot(_PAGE_PRESENT | __READABLE | \
+ __WRITEABLE | _PAGE_GLOBAL | _CACHE_UNCACHED)
+
+/*
+ * MIPS can't do page protection for execute, and considers that the same like
+ * read. Also, write permissions imply read permissions. This is the closest
+ * we can get by reasonable means..
+ */
+
+/*
+ * Dummy values to fill the table in mmap.c
+ * The real values will be generated at runtime
+ */
+#define __P000 __pgprot(0)
+#define __P001 __pgprot(0)
+#define __P010 __pgprot(0)
+#define __P011 __pgprot(0)
+#define __P100 __pgprot(0)
+#define __P101 __pgprot(0)
+#define __P110 __pgprot(0)
+#define __P111 __pgprot(0)
+
+#define __S000 __pgprot(0)
+#define __S001 __pgprot(0)
+#define __S010 __pgprot(0)
+#define __S011 __pgprot(0)
+#define __S100 __pgprot(0)
+#define __S101 __pgprot(0)
+#define __S110 __pgprot(0)
+#define __S111 __pgprot(0)
+
+extern unsigned long _page_cachable_default;
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero; used
+ * for zero-mapped memory areas etc..
+ */
+
+extern unsigned long empty_zero_page;
+extern unsigned long zero_page_mask;
+
+#define ZERO_PAGE(vaddr) \
+ (virt_to_page((void *)(empty_zero_page + (((unsigned long)(vaddr)) & zero_page_mask))))
+
+extern void paging_init(void);
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define pmd_phys(pmd) virt_to_phys((void *)pmd_val(pmd))
+#define pmd_page(pmd) (pfn_to_page(pmd_phys(pmd) >> PAGE_SHIFT))
+#define pmd_page_vaddr(pmd) pmd_val(pmd)
+
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+
+#define pte_none(pte) (!(((pte).pte_low | (pte).pte_high) & ~_PAGE_GLOBAL))
+#define pte_present(pte) ((pte).pte_low & _PAGE_PRESENT)
+
+static inline void set_pte(pte_t *ptep, pte_t pte)
+{
+ ptep->pte_high = pte.pte_high;
+ smp_wmb();
+ ptep->pte_low = pte.pte_low;
+ //printk("pte_high %x pte_low %x\n", ptep->pte_high, ptep->pte_low);
+
+ if (pte.pte_low & _PAGE_GLOBAL) {
+ pte_t *buddy = ptep_buddy(ptep);
+ /*
+ * Make sure the buddy is global too (if it's !none,
+ * it better already be global)
+ */
+ if (pte_none(*buddy)) {
+ buddy->pte_low |= _PAGE_GLOBAL;
+ buddy->pte_high |= _PAGE_GLOBAL;
+ }
+ }
+}
+#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval)
+
+static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+ pte_t null = __pte(0);
+
+ /* Preserve global status for the pair */
+ if (ptep_buddy(ptep)->pte_low & _PAGE_GLOBAL)
+ null.pte_low = null.pte_high = _PAGE_GLOBAL;
+
+ set_pte_at(mm, addr, ptep, null);
+}
+#else
+
+#define pte_none(pte) (!(pte_val(pte) & ~_PAGE_GLOBAL))
+#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT)
+
+/*
+ * Certain architectures need to do special things when pte's
+ * within a page table are directly modified. Thus, the following
+ * hook is made available.
+ */
+static inline void set_pte(pte_t *ptep, pte_t pteval)
+{
+ *ptep = pteval;
+#if !defined(CONFIG_CPU_R3000) && !defined(CONFIG_CPU_TX39XX)
+ if (pte_val(pteval) & _PAGE_GLOBAL) {
+ pte_t *buddy = ptep_buddy(ptep);
+ /*
+ * Make sure the buddy is global too (if it's !none,
+ * it better already be global)
+ */
+ if (pte_none(*buddy))
+ pte_val(*buddy) = pte_val(*buddy) | _PAGE_GLOBAL;
+ }
+#endif
+}
+#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval)
+
+static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+#if !defined(CONFIG_CPU_R3000) && !defined(CONFIG_CPU_TX39XX)
+ /* Preserve global status for the pair */
+ if (pte_val(*ptep_buddy(ptep)) & _PAGE_GLOBAL)
+ set_pte_at(mm, addr, ptep, __pte(_PAGE_GLOBAL));
+ else
+#endif
+ set_pte_at(mm, addr, ptep, __pte(0));
+}
+#endif
+
+/*
+ * (pmds are folded into puds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pmd(pmdptr, pmdval) do { *(pmdptr) = (pmdval); } while(0)
+
+#ifdef CONFIG_64BIT
+/*
+ * (puds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pud(pudptr, pudval) do { *(pudptr) = (pudval); } while(0)
+#endif
+
+#define PGD_T_LOG2 (__builtin_ffs(sizeof(pgd_t)) - 1)
+#define PMD_T_LOG2 (__builtin_ffs(sizeof(pmd_t)) - 1)
+#define PTE_T_LOG2 (__builtin_ffs(sizeof(pte_t)) - 1)
+
+/*
+ * We used to declare this array with size but gcc 3.3 and older are not able
+ * to find that this expression is a constant, so the size is dropped.
+ */
+extern pgd_t swapper_pg_dir[];
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+static inline int pte_write(pte_t pte) { return pte.pte_low & _PAGE_WRITE; }
+static inline int pte_dirty(pte_t pte) { return pte.pte_low & _PAGE_MODIFIED; }
+static inline int pte_young(pte_t pte) { return pte.pte_low & _PAGE_ACCESSED; }
+static inline int pte_file(pte_t pte) { return pte.pte_low & _PAGE_FILE; }
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+ pte.pte_low &= ~(_PAGE_WRITE | _PAGE_SILENT_WRITE);
+ pte.pte_high &= ~_PAGE_SILENT_WRITE;
+ return pte;
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+ pte.pte_low &= ~(_PAGE_MODIFIED | _PAGE_SILENT_WRITE);
+ pte.pte_high &= ~_PAGE_SILENT_WRITE;
+ return pte;
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+ pte.pte_low &= ~(_PAGE_ACCESSED | _PAGE_SILENT_READ);
+ pte.pte_high &= ~_PAGE_SILENT_READ;
+ return pte;
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+ pte.pte_low |= _PAGE_WRITE;
+ if (pte.pte_low & _PAGE_MODIFIED) {
+ pte.pte_low |= _PAGE_SILENT_WRITE;
+ pte.pte_high |= _PAGE_SILENT_WRITE;
+ }
+ return pte;
+}
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+ pte.pte_low |= _PAGE_MODIFIED;
+ if (pte.pte_low & _PAGE_WRITE) {
+ pte.pte_low |= _PAGE_SILENT_WRITE;
+ pte.pte_high |= _PAGE_SILENT_WRITE;
+ }
+ return pte;
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+ pte.pte_low |= _PAGE_ACCESSED;
+ if (pte.pte_low & _PAGE_READ) {
+ pte.pte_low |= _PAGE_SILENT_READ;
+ pte.pte_high |= _PAGE_SILENT_READ;
+ }
+ return pte;
+}
+#else
+static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_WRITE; }
+static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_MODIFIED; }
+static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; }
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+ pte_val(pte) &= ~(_PAGE_WRITE | _PAGE_SILENT_WRITE);
+ return pte;
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+ pte_val(pte) &= ~(_PAGE_MODIFIED|_PAGE_SILENT_WRITE);
+ return pte;
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+ pte_val(pte) &= ~(_PAGE_ACCESSED|_PAGE_SILENT_READ);
+ return pte;
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+ pte_val(pte) |= _PAGE_WRITE;
+ if (pte_val(pte) & _PAGE_MODIFIED)
+ pte_val(pte) |= _PAGE_SILENT_WRITE;
+ return pte;
+}
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+ pte_val(pte) |= _PAGE_MODIFIED;
+ if (pte_val(pte) & _PAGE_WRITE)
+ pte_val(pte) |= _PAGE_SILENT_WRITE;
+ return pte;
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+ pte_val(pte) |= _PAGE_ACCESSED;
+ if (pte_val(pte) & _PAGE_READ)
+ pte_val(pte) |= _PAGE_SILENT_READ;
+ return pte;
+}
+#endif
+static inline int pte_special(pte_t pte) { return 0; }
+static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
+
+/*
+ * Macro to make mark a page protection value as "uncacheable". Note
+ * that "protection" is really a misnomer here as the protection value
+ * contains the memory attribute bits, dirty bits, and various other
+ * bits as well.
+ */
+#define pgprot_noncached pgprot_noncached
+
+static inline pgprot_t pgprot_noncached(pgprot_t _prot)
+{
+ unsigned long prot = pgprot_val(_prot);
+
+ prot = (prot & ~_CACHE_MASK) | _CACHE_UNCACHED;
+
+ return __pgprot(prot);
+}
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
+
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+ pte.pte_low &= _PAGE_CHG_MASK;
+ pte.pte_high &= ~0x3f;
+ pte.pte_low |= pgprot_val(newprot);
+ pte.pte_high |= pgprot_val(newprot) & 0x3f;
+ return pte;
+}
+#else
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+ return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot));
+}
+#endif
+
+
+extern void __update_tlb(struct vm_area_struct *vma, unsigned long address,
+ pte_t pte);
+extern void __update_cache(struct vm_area_struct *vma, unsigned long address,
+ pte_t pte);
+
+static inline void update_mmu_cache(struct vm_area_struct *vma,
+ unsigned long address, pte_t pte)
+{
+ __update_tlb(vma, address, pte);
+ __update_cache(vma, address, pte);
+}
+
+#define kern_addr_valid(addr) (1)
+
+#ifdef CONFIG_64BIT_PHYS_ADDR
+extern int remap_pfn_range(struct vm_area_struct *vma, unsigned long from, unsigned long pfn, unsigned long size, pgprot_t prot);
+
+static inline int io_remap_pfn_range(struct vm_area_struct *vma,
+ unsigned long vaddr,
+ unsigned long pfn,
+ unsigned long size,
+ pgprot_t prot)
+{
+ phys_t phys_addr_high = fixup_bigphys_addr(pfn << PAGE_SHIFT, size);
+ return remap_pfn_range(vma, vaddr, phys_addr_high >> PAGE_SHIFT, size, prot);
+}
+#else
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range(vma, vaddr, pfn, size, prot)
+#endif
+
+#include <asm-generic/pgtable.h>
+
+/*
+ * We provide our own get_unmapped area to cope with the virtual aliasing
+ * constraints placed on us by the cache architecture.
+ */
+#define HAVE_ARCH_UNMAPPED_AREA
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init() do { } while (0)
+
+#endif /* _ASM_PGTABLE_H */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/gpio.h b/arch/mips/include/asm/pmc-sierra/msp71xx/gpio.h
new file mode 100644
index 00000000000..ebdbab973e4
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/gpio.h
@@ -0,0 +1,46 @@
+/*
+ * include/asm-mips/pmc-sierra/msp71xx/gpio.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * @author Patrick Glass <patrickglass@gmail.com>
+ */
+
+#ifndef __PMC_MSP71XX_GPIO_H
+#define __PMC_MSP71XX_GPIO_H
+
+/* Max number of gpio's is 28 on chip plus 3 banks of I2C IO Expanders */
+#define ARCH_NR_GPIOS (28 + (3 * 8))
+
+/* new generic GPIO API - see Documentation/gpio.txt */
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+
+/* Setup calls for the gpio and gpio extended */
+extern void msp71xx_init_gpio(void);
+extern void msp71xx_init_gpio_extended(void);
+extern int msp71xx_set_output_drive(unsigned gpio, int value);
+
+/* Custom output drive functionss */
+static inline int gpio_set_output_drive(unsigned gpio, int value)
+{
+ return msp71xx_set_output_drive(gpio, value);
+}
+
+/* IRQ's are not supported for gpio lines */
+static inline int gpio_to_irq(unsigned gpio)
+{
+ return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+ return -EINVAL;
+}
+
+#endif /* __PMC_MSP71XX_GPIO_H */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_cic_int.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_cic_int.h
new file mode 100644
index 00000000000..c84bcf9570b
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_cic_int.h
@@ -0,0 +1,151 @@
+/*
+ * Defines for the MSP interrupt controller.
+ *
+ * Copyright (C) 1999 MIPS Technologies, Inc. All rights reserved.
+ * Author: Carsten Langgaard, carstenl@mips.com
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ */
+
+#ifndef _MSP_CIC_INT_H
+#define _MSP_CIC_INT_H
+
+/*
+ * The PMC-Sierra CIC interrupts are all centrally managed by the
+ * CIC sub-system.
+ * We attempt to keep the interrupt numbers as consistent as possible
+ * across all of the MSP devices, but some differences will creep in ...
+ * The interrupts which are directly forwarded to the MIPS core interrupts
+ * are assigned interrupts in the range 0-7, interrupts cascaded through
+ * the CIC are assigned interrupts 8-39. The cascade occurs on C_IRQ4
+ * (MSP_INT_CIC). Currently we don't really distinguish between VPE1
+ * and VPE0 (or thread contexts for that matter). Will have to fix.
+ * The PER interrupts are assigned interrupts in the range 40-71.
+*/
+
+
+/*
+ * IRQs directly forwarded to the CPU
+ */
+#define MSP_MIPS_INTBASE 0
+#define MSP_INT_SW0 0 /* IRQ for swint0, C_SW0 */
+#define MSP_INT_SW1 1 /* IRQ for swint1, C_SW1 */
+#define MSP_INT_MAC0 2 /* IRQ for MAC 0, C_IRQ0 */
+#define MSP_INT_MAC1 3 /* IRQ for MAC 1, C_IRQ1 */
+#define MSP_INT_USB 4 /* IRQ for USB, C_IRQ2 */
+#define MSP_INT_SAR 5 /* IRQ for ADSL2+ SAR, C_IRQ3 */
+#define MSP_INT_CIC 6 /* IRQ for CIC block, C_IRQ4 */
+#define MSP_INT_SEC 7 /* IRQ for Sec engine, C_IRQ5 */
+
+/*
+ * IRQs cascaded on CPU interrupt 4 (CAUSE bit 12, C_IRQ4)
+ * These defines should be tied to the register definitions for the CIC
+ * interrupt routine. For now, just use hard-coded values.
+ */
+#define MSP_CIC_INTBASE (MSP_MIPS_INTBASE + 8)
+#define MSP_INT_EXT0 (MSP_CIC_INTBASE + 0)
+ /* External interrupt 0 */
+#define MSP_INT_EXT1 (MSP_CIC_INTBASE + 1)
+ /* External interrupt 1 */
+#define MSP_INT_EXT2 (MSP_CIC_INTBASE + 2)
+ /* External interrupt 2 */
+#define MSP_INT_EXT3 (MSP_CIC_INTBASE + 3)
+ /* External interrupt 3 */
+#define MSP_INT_CPUIF (MSP_CIC_INTBASE + 4)
+ /* CPU interface interrupt */
+#define MSP_INT_EXT4 (MSP_CIC_INTBASE + 5)
+ /* External interrupt 4 */
+#define MSP_INT_CIC_USB (MSP_CIC_INTBASE + 6)
+ /* Cascaded IRQ for USB */
+#define MSP_INT_MBOX (MSP_CIC_INTBASE + 7)
+ /* Sec engine mailbox IRQ */
+#define MSP_INT_EXT5 (MSP_CIC_INTBASE + 8)
+ /* External interrupt 5 */
+#define MSP_INT_TDM (MSP_CIC_INTBASE + 9)
+ /* TDM interrupt */
+#define MSP_INT_CIC_MAC0 (MSP_CIC_INTBASE + 10)
+ /* Cascaded IRQ for MAC 0 */
+#define MSP_INT_CIC_MAC1 (MSP_CIC_INTBASE + 11)
+ /* Cascaded IRQ for MAC 1 */
+#define MSP_INT_CIC_SEC (MSP_CIC_INTBASE + 12)
+ /* Cascaded IRQ for sec engine */
+#define MSP_INT_PER (MSP_CIC_INTBASE + 13)
+ /* Peripheral interrupt */
+#define MSP_INT_TIMER0 (MSP_CIC_INTBASE + 14)
+ /* SLP timer 0 */
+#define MSP_INT_TIMER1 (MSP_CIC_INTBASE + 15)
+ /* SLP timer 1 */
+#define MSP_INT_TIMER2 (MSP_CIC_INTBASE + 16)
+ /* SLP timer 2 */
+#define MSP_INT_VPE0_TIMER (MSP_CIC_INTBASE + 17)
+ /* VPE0 MIPS timer */
+#define MSP_INT_BLKCP (MSP_CIC_INTBASE + 18)
+ /* Block Copy */
+#define MSP_INT_UART0 (MSP_CIC_INTBASE + 19)
+ /* UART 0 */
+#define MSP_INT_PCI (MSP_CIC_INTBASE + 20)
+ /* PCI subsystem */
+#define MSP_INT_EXT6 (MSP_CIC_INTBASE + 21)
+ /* External interrupt 5 */
+#define MSP_INT_PCI_MSI (MSP_CIC_INTBASE + 22)
+ /* PCI Message Signal */
+#define MSP_INT_CIC_SAR (MSP_CIC_INTBASE + 23)
+ /* Cascaded ADSL2+ SAR IRQ */
+#define MSP_INT_DSL (MSP_CIC_INTBASE + 24)
+ /* ADSL2+ IRQ */
+#define MSP_INT_CIC_ERR (MSP_CIC_INTBASE + 25)
+ /* SLP error condition */
+#define MSP_INT_VPE1_TIMER (MSP_CIC_INTBASE + 26)
+ /* VPE1 MIPS timer */
+#define MSP_INT_VPE0_PC (MSP_CIC_INTBASE + 27)
+ /* VPE0 Performance counter */
+#define MSP_INT_VPE1_PC (MSP_CIC_INTBASE + 28)
+ /* VPE1 Performance counter */
+#define MSP_INT_EXT7 (MSP_CIC_INTBASE + 29)
+ /* External interrupt 5 */
+#define MSP_INT_VPE0_SW (MSP_CIC_INTBASE + 30)
+ /* VPE0 Software interrupt */
+#define MSP_INT_VPE1_SW (MSP_CIC_INTBASE + 31)
+ /* VPE0 Software interrupt */
+
+/*
+ * IRQs cascaded on CIC PER interrupt (MSP_INT_PER)
+ */
+#define MSP_PER_INTBASE (MSP_CIC_INTBASE + 32)
+/* Reserved 0-1 */
+#define MSP_INT_UART1 (MSP_PER_INTBASE + 2)
+ /* UART 1 */
+/* Reserved 3-5 */
+#define MSP_INT_2WIRE (MSP_PER_INTBASE + 6)
+ /* 2-wire */
+#define MSP_INT_TM0 (MSP_PER_INTBASE + 7)
+ /* Peripheral timer block out 0 */
+#define MSP_INT_TM1 (MSP_PER_INTBASE + 8)
+ /* Peripheral timer block out 1 */
+/* Reserved 9 */
+#define MSP_INT_SPRX (MSP_PER_INTBASE + 10)
+ /* SPI RX complete */
+#define MSP_INT_SPTX (MSP_PER_INTBASE + 11)
+ /* SPI TX complete */
+#define MSP_INT_GPIO (MSP_PER_INTBASE + 12)
+ /* GPIO */
+#define MSP_INT_PER_ERR (MSP_PER_INTBASE + 13)
+ /* Peripheral error */
+/* Reserved 14-31 */
+
+#endif /* !_MSP_CIC_INT_H */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_int.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_int.h
new file mode 100644
index 00000000000..1d9f0547482
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_int.h
@@ -0,0 +1,43 @@
+/*
+ * Defines for the MSP interrupt handlers.
+ *
+ * Copyright (C) 2005, PMC-Sierra, Inc. All rights reserved.
+ * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ */
+
+#ifndef _MSP_INT_H
+#define _MSP_INT_H
+
+/*
+ * The PMC-Sierra MSP product line has at least two different interrupt
+ * controllers, the SLP register based scheme and the CIC interrupt
+ * controller block mechanism. This file distinguishes between them
+ * so that devices see a uniform interface.
+ */
+
+#if defined(CONFIG_IRQ_MSP_SLP)
+ #include "msp_slp_int.h"
+#elif defined(CONFIG_IRQ_MSP_CIC)
+ #include "msp_cic_int.h"
+#else
+ #error "What sort of interrupt controller does *your* MSP have?"
+#endif
+
+#endif /* !_MSP_INT_H */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_pci.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_pci.h
new file mode 100644
index 00000000000..41560690361
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_pci.h
@@ -0,0 +1,205 @@
+/*
+ * Copyright (c) 2000-2006 PMC-Sierra INC.
+ *
+ * This program is free software; you can redistribute it
+ * and/or modify it under the terms of the GNU General
+ * Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be
+ * useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ * PURPOSE. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA
+ * 02139, USA.
+ *
+ * PMC-SIERRA INC. DISCLAIMS ANY LIABILITY OF ANY KIND
+ * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS
+ * SOFTWARE.
+ */
+
+#ifndef _MSP_PCI_H_
+#define _MSP_PCI_H_
+
+#define MSP_HAS_PCI(ID) (((u32)(ID) <= 0x4236) && ((u32)(ID) >= 0x4220))
+
+/*
+ * It is convenient to program the OATRAN register so that
+ * Athena virtual address space and PCI address space are
+ * the same. This is not a requirement, just a convenience.
+ *
+ * The only hard restrictions on the value of OATRAN is that
+ * OATRAN must not be programmed to allow translated memory
+ * addresses to fall within the lowest 512MB of
+ * PCI address space. This region is hardcoded
+ * for use as Athena PCI Host Controller target
+ * access memory space to the Athena's SDRAM.
+ *
+ * Note that OATRAN applies only to memory accesses, not
+ * to I/O accesses.
+ *
+ * To program OATRAN to make Athena virtual address space
+ * and PCI address space have the same values, OATRAN
+ * is to be programmed to 0xB8000000. The top seven
+ * bits of the value mimic the seven bits clipped off
+ * by the PCI Host controller.
+ *
+ * With OATRAN at the said value, when the CPU does
+ * an access to its virtual address at, say 0xB900_5000,
+ * the address appearing on the PCI bus will be
+ * 0xB900_5000.
+ * - Michael Penner
+ */
+#define MSP_PCI_OATRAN 0xB8000000UL
+
+#define MSP_PCI_SPACE_BASE (MSP_PCI_OATRAN + 0x1002000UL)
+#define MSP_PCI_SPACE_SIZE (0x3000000UL - 0x2000)
+#define MSP_PCI_SPACE_END \
+ (MSP_PCI_SPACE_BASE + MSP_PCI_SPACE_SIZE - 1)
+#define MSP_PCI_IOSPACE_BASE (MSP_PCI_OATRAN + 0x1001000UL)
+#define MSP_PCI_IOSPACE_SIZE 0x1000
+#define MSP_PCI_IOSPACE_END \
+ (MSP_PCI_IOSPACE_BASE + MSP_PCI_IOSPACE_SIZE - 1)
+
+/* IRQ for PCI status interrupts */
+#define PCI_STAT_IRQ 20
+
+#define QFLUSH_REG_1 0xB7F40000
+
+typedef volatile unsigned int pcireg;
+typedef void * volatile ppcireg;
+
+struct pci_block_copy
+{
+ pcireg unused1; /* +0x00 */
+ pcireg unused2; /* +0x04 */
+ ppcireg unused3; /* +0x08 */
+ ppcireg unused4; /* +0x0C */
+ pcireg unused5; /* +0x10 */
+ pcireg unused6; /* +0x14 */
+ pcireg unused7; /* +0x18 */
+ ppcireg unused8; /* +0x1C */
+ ppcireg unused9; /* +0x20 */
+ pcireg unusedA; /* +0x24 */
+ ppcireg unusedB; /* +0x28 */
+ ppcireg unusedC; /* +0x2C */
+};
+
+enum
+{
+ config_device_vendor, /* 0 */
+ config_status_command, /* 1 */
+ config_class_revision, /* 2 */
+ config_BIST_header_latency_cache, /* 3 */
+ config_BAR0, /* 4 */
+ config_BAR1, /* 5 */
+ config_BAR2, /* 6 */
+ config_not_used7, /* 7 */
+ config_not_used8, /* 8 */
+ config_not_used9, /* 9 */
+ config_CIS, /* 10 */
+ config_subsystem, /* 11 */
+ config_not_used12, /* 12 */
+ config_capabilities, /* 13 */
+ config_not_used14, /* 14 */
+ config_lat_grant_irq, /* 15 */
+ config_message_control,/* 16 */
+ config_message_addr, /* 17 */
+ config_message_data, /* 18 */
+ config_VPD_addr, /* 19 */
+ config_VPD_data, /* 20 */
+ config_maxregs /* 21 - number of registers */
+};
+
+struct msp_pci_regs
+{
+ pcireg hop_unused_00; /* +0x00 */
+ pcireg hop_unused_04; /* +0x04 */
+ pcireg hop_unused_08; /* +0x08 */
+ pcireg hop_unused_0C; /* +0x0C */
+ pcireg hop_unused_10; /* +0x10 */
+ pcireg hop_unused_14; /* +0x14 */
+ pcireg hop_unused_18; /* +0x18 */
+ pcireg hop_unused_1C; /* +0x1C */
+ pcireg hop_unused_20; /* +0x20 */
+ pcireg hop_unused_24; /* +0x24 */
+ pcireg hop_unused_28; /* +0x28 */
+ pcireg hop_unused_2C; /* +0x2C */
+ pcireg hop_unused_30; /* +0x30 */
+ pcireg hop_unused_34; /* +0x34 */
+ pcireg if_control; /* +0x38 */
+ pcireg oatran; /* +0x3C */
+ pcireg reset_ctl; /* +0x40 */
+ pcireg config_addr; /* +0x44 */
+ pcireg hop_unused_48; /* +0x48 */
+ pcireg msg_signaled_int_status; /* +0x4C */
+ pcireg msg_signaled_int_mask; /* +0x50 */
+ pcireg if_status; /* +0x54 */
+ pcireg if_mask; /* +0x58 */
+ pcireg hop_unused_5C; /* +0x5C */
+ pcireg hop_unused_60; /* +0x60 */
+ pcireg hop_unused_64; /* +0x64 */
+ pcireg hop_unused_68; /* +0x68 */
+ pcireg hop_unused_6C; /* +0x6C */
+ pcireg hop_unused_70; /* +0x70 */
+
+ struct pci_block_copy pci_bc[2] __attribute__((aligned(64)));
+
+ pcireg error_hdr1; /* +0xE0 */
+ pcireg error_hdr2; /* +0xE4 */
+
+ pcireg config[config_maxregs] __attribute__((aligned(256)));
+
+};
+
+#define BPCI_CFGADDR_BUSNUM_SHF 16
+#define BPCI_CFGADDR_FUNCTNUM_SHF 8
+#define BPCI_CFGADDR_REGNUM_SHF 2
+#define BPCI_CFGADDR_ENABLE (1<<31)
+
+#define BPCI_IFCONTROL_RTO (1<<20) /* Retry timeout */
+#define BPCI_IFCONTROL_HCE (1<<16) /* Host configuration enable */
+#define BPCI_IFCONTROL_CTO_SHF 12 /* Shift count for CTO bits */
+#define BPCI_IFCONTROL_SE (1<<5) /* Enable exceptions on errors */
+#define BPCI_IFCONTROL_BIST (1<<4) /* Use BIST in per. mode */
+#define BPCI_IFCONTROL_CAP (1<<3) /* Enable capabilities */
+#define BPCI_IFCONTROL_MMC_SHF 0 /* Shift count for MMC bits */
+
+#define BPCI_IFSTATUS_MGT (1<<8) /* Master Grant timeout */
+#define BPCI_IFSTATUS_MTT (1<<9) /* Master TRDY timeout */
+#define BPCI_IFSTATUS_MRT (1<<10) /* Master retry timeout */
+#define BPCI_IFSTATUS_BC0F (1<<13) /* Block copy 0 fault */
+#define BPCI_IFSTATUS_BC1F (1<<14) /* Block copy 1 fault */
+#define BPCI_IFSTATUS_PCIU (1<<15) /* PCI unable to respond */
+#define BPCI_IFSTATUS_BSIZ (1<<16) /* PCI access with illegal size */
+#define BPCI_IFSTATUS_BADD (1<<17) /* PCI access with illegal addr */
+#define BPCI_IFSTATUS_RTO (1<<18) /* Retry time out */
+#define BPCI_IFSTATUS_SER (1<<19) /* System error */
+#define BPCI_IFSTATUS_PER (1<<20) /* Parity error */
+#define BPCI_IFSTATUS_LCA (1<<21) /* Local CPU abort */
+#define BPCI_IFSTATUS_MEM (1<<22) /* Memory prot. violation */
+#define BPCI_IFSTATUS_ARB (1<<23) /* Arbiter timed out */
+#define BPCI_IFSTATUS_STA (1<<27) /* Signaled target abort */
+#define BPCI_IFSTATUS_TA (1<<28) /* Target abort */
+#define BPCI_IFSTATUS_MA (1<<29) /* Master abort */
+#define BPCI_IFSTATUS_PEI (1<<30) /* Parity error as initiator */
+#define BPCI_IFSTATUS_PET (1<<31) /* Parity error as target */
+
+#define BPCI_RESETCTL_PR (1<<0) /* True if reset asserted */
+#define BPCI_RESETCTL_RT (1<<4) /* Release time */
+#define BPCI_RESETCTL_CT (1<<8) /* Config time */
+#define BPCI_RESETCTL_PE (1<<12) /* PCI enabled */
+#define BPCI_RESETCTL_HM (1<<13) /* PCI host mode */
+#define BPCI_RESETCTL_RI (1<<14) /* PCI reset in */
+
+extern struct msp_pci_regs msp_pci_regs
+ __attribute__((section(".register")));
+extern unsigned long msp_pci_config_space
+ __attribute__((section(".register")));
+
+#endif /* !_MSP_PCI_H_ */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h
new file mode 100644
index 00000000000..14ca7dc382a
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h
@@ -0,0 +1,176 @@
+/*
+ * MIPS boards bootprom interface for the Linux kernel.
+ *
+ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
+ * Author: Carsten Langgaard, carstenl@mips.com
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ */
+
+#ifndef _ASM_MSP_PROM_H
+#define _ASM_MSP_PROM_H
+
+#include <linux/types.h>
+
+#define DEVICEID "deviceid"
+#define FEATURES "features"
+#define PROM_ENV "prom_env"
+#define PROM_ENV_FILE "/proc/"PROM_ENV
+#define PROM_ENV_SIZE 256
+
+#define CPU_DEVID_FAMILY 0x0000ff00
+#define CPU_DEVID_REVISION 0x000000ff
+
+#define FPGA_IS_POLO(revision) \
+ (((revision >= 0xb0) && (revision < 0xd0)))
+#define FPGA_IS_5000(revision) \
+ ((revision >= 0x80) && (revision <= 0x90))
+#define FPGA_IS_ZEUS(revision) ((revision < 0x7f))
+#define FPGA_IS_DUET(revision) \
+ (((revision >= 0xa0) && (revision < 0xb0)))
+#define FPGA_IS_MSP4200(revision) ((revision >= 0xd0))
+#define FPGA_IS_MSP7100(revision) ((revision >= 0xd0))
+
+#define MACHINE_TYPE_POLO "POLO"
+#define MACHINE_TYPE_DUET "DUET"
+#define MACHINE_TYPE_ZEUS "ZEUS"
+#define MACHINE_TYPE_MSP2000REVB "MSP2000REVB"
+#define MACHINE_TYPE_MSP5000 "MSP5000"
+#define MACHINE_TYPE_MSP4200 "MSP4200"
+#define MACHINE_TYPE_MSP7120 "MSP7120"
+#define MACHINE_TYPE_MSP7130 "MSP7130"
+#define MACHINE_TYPE_OTHER "OTHER"
+
+#define MACHINE_TYPE_POLO_FPGA "POLO-FPGA"
+#define MACHINE_TYPE_DUET_FPGA "DUET-FPGA"
+#define MACHINE_TYPE_ZEUS_FPGA "ZEUS_FPGA"
+#define MACHINE_TYPE_MSP2000REVB_FPGA "MSP2000REVB-FPGA"
+#define MACHINE_TYPE_MSP5000_FPGA "MSP5000-FPGA"
+#define MACHINE_TYPE_MSP4200_FPGA "MSP4200-FPGA"
+#define MACHINE_TYPE_MSP7100_FPGA "MSP7100-FPGA"
+#define MACHINE_TYPE_OTHER_FPGA "OTHER-FPGA"
+
+/* Device Family definitions */
+#define FAMILY_FPGA 0x0000
+#define FAMILY_ZEUS 0x1000
+#define FAMILY_POLO 0x2000
+#define FAMILY_DUET 0x4000
+#define FAMILY_TRIAD 0x5000
+#define FAMILY_MSP4200 0x4200
+#define FAMILY_MSP4200_FPGA 0x4f00
+#define FAMILY_MSP7100 0x7100
+#define FAMILY_MSP7100_FPGA 0x7f00
+
+/* Device Type definitions */
+#define TYPE_MSP7120 0x7120
+#define TYPE_MSP7130 0x7130
+
+#define ENET_KEY 'E'
+#define ENETTXD_KEY 'e'
+#define PCI_KEY 'P'
+#define PCIMUX_KEY 'p'
+#define SEC_KEY 'S'
+#define SPAD_KEY 'D'
+#define TDM_KEY 'T'
+#define ZSP_KEY 'Z'
+
+#define FEATURE_NOEXIST '-'
+#define FEATURE_EXIST '+'
+
+#define ENET_MII 'M'
+#define ENET_RMII 'R'
+
+#define ENETTXD_FALLING 'F'
+#define ENETTXD_RISING 'R'
+
+#define PCI_HOST 'H'
+#define PCI_PERIPHERAL 'P'
+
+#define PCIMUX_FULL 'F'
+#define PCIMUX_SINGLE 'S'
+
+#define SEC_DUET 'D'
+#define SEC_POLO 'P'
+#define SEC_SLOW 'S'
+#define SEC_TRIAD 'T'
+
+#define SPAD_POLO 'P'
+
+#define TDM_DUET 'D' /* DUET TDMs might exist */
+#define TDM_POLO 'P' /* POLO TDMs might exist */
+#define TDM_TRIAD 'T' /* TRIAD TDMs might exist */
+
+#define ZSP_DUET 'D' /* one DUET zsp engine */
+#define ZSP_TRIAD 'T' /* two TRIAD zsp engines */
+
+extern char *prom_getcmdline(void);
+extern char *prom_getenv(char *name);
+extern void prom_init_cmdline(void);
+extern void prom_meminit(void);
+extern void prom_fixup_mem_map(unsigned long start_mem,
+ unsigned long end_mem);
+
+#ifdef CONFIG_MTD_PMC_MSP_RAMROOT
+extern bool get_ramroot(void **start, unsigned long *size);
+#endif
+
+extern int get_ethernet_addr(char *ethaddr_name, char *ethernet_addr);
+extern unsigned long get_deviceid(void);
+extern char identify_enet(unsigned long interface_num);
+extern char identify_enetTxD(unsigned long interface_num);
+extern char identify_pci(void);
+extern char identify_sec(void);
+extern char identify_spad(void);
+extern char identify_sec(void);
+extern char identify_tdm(void);
+extern char identify_zsp(void);
+extern unsigned long identify_family(void);
+extern unsigned long identify_revision(void);
+
+/*
+ * The following macro calls prom_printf and puts the format string
+ * into an init section so it can be reclaimed.
+ */
+#define ppfinit(f, x...) \
+ do { \
+ static char _f[] __initdata = KERN_INFO f; \
+ printk(_f, ## x); \
+ } while (0)
+
+/* Memory descriptor management. */
+#define PROM_MAX_PMEMBLOCKS 7 /* 6 used */
+
+enum yamon_memtypes {
+ yamon_dontuse,
+ yamon_prom,
+ yamon_free,
+};
+
+struct prom_pmemblock {
+ unsigned long base; /* Within KSEG0. */
+ unsigned int size; /* In bytes. */
+ unsigned int type; /* free or prom memory */
+};
+
+extern int prom_argc;
+extern char **prom_argv;
+extern char **prom_envp;
+extern int *prom_vec;
+extern struct prom_pmemblock *prom_getmdesc(void);
+
+#endif /* !_ASM_MSP_PROM_H */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h
new file mode 100644
index 00000000000..60a5a38dd5b
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regops.h
@@ -0,0 +1,236 @@
+/*
+ * SMP/VPE-safe functions to access "registers" (see note).
+ *
+ * NOTES:
+* - These macros use ll/sc instructions, so it is your responsibility to
+ * ensure these are available on your platform before including this file.
+ * - The MIPS32 spec states that ll/sc results are undefined for uncached
+ * accesses. This means they can't be used on HW registers accessed
+ * through kseg1. Code which requires these macros for this purpose must
+ * front-end the registers with cached memory "registers" and have a single
+ * thread update the actual HW registers.
+ * - A maximum of 2k of code can be inserted between ll and sc. Every
+ * memory accesses between the instructions will increase the chance of
+ * sc failing and having to loop.
+ * - When using custom_read_reg32/custom_write_reg32 only perform the
+ * necessary logical operations on the register value in between these
+ * two calls. All other logic should be performed before the first call.
+ * - There is a bug on the R10000 chips which has a workaround. If you
+ * are affected by this bug, make sure to define the symbol 'R10000_LLSC_WAR'
+ * to be non-zero. If you are using this header from within linux, you may
+ * include <asm/war.h> before including this file to have this defined
+ * appropriately for you.
+ *
+ * Copyright 2005-2007 PMC-Sierra, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+ * EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc., 675
+ * Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_REGOPS_H__
+#define __ASM_REGOPS_H__
+
+#include <linux/types.h>
+
+#include <asm/war.h>
+
+#ifndef R10000_LLSC_WAR
+#define R10000_LLSC_WAR 0
+#endif
+
+#if R10000_LLSC_WAR == 1
+#define __beqz "beqzl "
+#else
+#define __beqz "beqz "
+#endif
+
+#ifndef _LINUX_TYPES_H
+typedef unsigned int u32;
+#endif
+
+/*
+ * Sets all the masked bits to the corresponding value bits
+ */
+static inline void set_value_reg32(volatile u32 *const addr,
+ u32 const mask,
+ u32 const value)
+{
+ u32 temp;
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set mips3 \n"
+ "1: ll %0, %1 # set_value_reg32 \n"
+ " and %0, %2 \n"
+ " or %0, %3 \n"
+ " sc %0, %1 \n"
+ " "__beqz"%0, 1b \n"
+ " nop \n"
+ " .set pop \n"
+ : "=&r" (temp), "=m" (*addr)
+ : "ir" (~mask), "ir" (value), "m" (*addr));
+}
+
+/*
+ * Sets all the masked bits to '1'
+ */
+static inline void set_reg32(volatile u32 *const addr,
+ u32 const mask)
+{
+ u32 temp;
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set mips3 \n"
+ "1: ll %0, %1 # set_reg32 \n"
+ " or %0, %2 \n"
+ " sc %0, %1 \n"
+ " "__beqz"%0, 1b \n"
+ " nop \n"
+ " .set pop \n"
+ : "=&r" (temp), "=m" (*addr)
+ : "ir" (mask), "m" (*addr));
+}
+
+/*
+ * Sets all the masked bits to '0'
+ */
+static inline void clear_reg32(volatile u32 *const addr,
+ u32 const mask)
+{
+ u32 temp;
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set mips3 \n"
+ "1: ll %0, %1 # clear_reg32 \n"
+ " and %0, %2 \n"
+ " sc %0, %1 \n"
+ " "__beqz"%0, 1b \n"
+ " nop \n"
+ " .set pop \n"
+ : "=&r" (temp), "=m" (*addr)
+ : "ir" (~mask), "m" (*addr));
+}
+
+/*
+ * Toggles all masked bits from '0' to '1' and '1' to '0'
+ */
+static inline void toggle_reg32(volatile u32 *const addr,
+ u32 const mask)
+{
+ u32 temp;
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set mips3 \n"
+ "1: ll %0, %1 # toggle_reg32 \n"
+ " xor %0, %2 \n"
+ " sc %0, %1 \n"
+ " "__beqz"%0, 1b \n"
+ " nop \n"
+ " .set pop \n"
+ : "=&r" (temp), "=m" (*addr)
+ : "ir" (mask), "m" (*addr));
+}
+
+/*
+ * Read all masked bits others are returned as '0'
+ */
+static inline u32 read_reg32(volatile u32 *const addr,
+ u32 const mask)
+{
+ u32 temp;
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " lw %0, %1 # read \n"
+ " and %0, %2 # mask \n"
+ " .set pop \n"
+ : "=&r" (temp)
+ : "m" (*addr), "ir" (mask));
+
+ return temp;
+}
+
+/*
+ * blocking_read_reg32 - Read address with blocking load
+ *
+ * Uncached writes need to be read back to ensure they reach RAM.
+ * The returned value must be 'used' to prevent from becoming a
+ * non-blocking load.
+ */
+static inline u32 blocking_read_reg32(volatile u32 *const addr)
+{
+ u32 temp;
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " lw %0, %1 # read \n"
+ " move %0, %0 # block \n"
+ " .set pop \n"
+ : "=&r" (temp)
+ : "m" (*addr));
+
+ return temp;
+}
+
+/*
+ * For special strange cases only:
+ *
+ * If you need custom processing within a ll/sc loop, use the following macros
+ * VERY CAREFULLY:
+ *
+ * u32 tmp; <-- Define a variable to hold the data
+ *
+ * custom_read_reg32(address, tmp); <-- Reads the address and put the value
+ * in the 'tmp' variable given
+ *
+ * From here on out, you are (basicly) atomic, so don't do anything too
+ * fancy!
+ * Also, this code may loop if the end of this block fails to write
+ * everything back safely due do the other CPU, so do NOT do anything
+ * with side-effects!
+ *
+ * custom_write_reg32(address, tmp); <-- Writes back 'tmp' safely.
+ */
+#define custom_read_reg32(address, tmp) \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set mips3 \n" \
+ "1: ll %0, %1 #custom_read_reg32 \n" \
+ " .set pop \n" \
+ : "=r" (tmp), "=m" (*address) \
+ : "m" (*address))
+
+#define custom_write_reg32(address, tmp) \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set mips3 \n" \
+ " sc %0, %1 #custom_write_reg32 \n" \
+ " "__beqz"%0, 1b \n" \
+ " nop \n" \
+ " .set pop \n" \
+ : "=&r" (tmp), "=m" (*address) \
+ : "0" (tmp), "m" (*address))
+
+#endif /* __ASM_REGOPS_H__ */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regs.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regs.h
new file mode 100644
index 00000000000..603eb737b4a
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_regs.h
@@ -0,0 +1,663 @@
+/*
+ * Defines for the address space, registers and register configuration
+ * (bit masks, access macros etc) for the PMC-Sierra line of MSP products.
+ * This file contains addess maps for all the devices in the line of
+ * products but only has register definitions and configuration masks for
+ * registers which aren't definitely associated with any device. Things
+ * like clock settings, reset access, the ELB etc. Individual device
+ * drivers will reference the appropriate XXX_BASE value defined here
+ * and have individual registers offset from that.
+ *
+ * Copyright (C) 2005-2007 PMC-Sierra, Inc. All rights reserved.
+ * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ */
+
+#include <asm/addrspace.h>
+#include <linux/types.h>
+
+#ifndef _ASM_MSP_REGS_H
+#define _ASM_MSP_REGS_H
+
+/*
+ ########################################################################
+ # Address space and device base definitions #
+ ########################################################################
+ */
+
+/*
+ ***************************************************************************
+ * System Logic and Peripherals (ELB, UART0, etc) device address space *
+ ***************************************************************************
+ */
+#define MSP_SLP_BASE 0x1c000000
+ /* System Logic and Peripherals */
+#define MSP_RST_BASE (MSP_SLP_BASE + 0x10)
+ /* System reset register base */
+#define MSP_RST_SIZE 0x0C /* System reset register space */
+
+#define MSP_WTIMER_BASE (MSP_SLP_BASE + 0x04C)
+ /* watchdog timer base */
+#define MSP_ITIMER_BASE (MSP_SLP_BASE + 0x054)
+ /* internal timer base */
+#define MSP_UART0_BASE (MSP_SLP_BASE + 0x100)
+ /* UART0 controller base */
+#define MSP_BCPY_CTRL_BASE (MSP_SLP_BASE + 0x120)
+ /* Block Copy controller base */
+#define MSP_BCPY_DESC_BASE (MSP_SLP_BASE + 0x160)
+ /* Block Copy descriptor base */
+
+/*
+ ***************************************************************************
+ * PCI address space *
+ ***************************************************************************
+ */
+#define MSP_PCI_BASE 0x19000000
+
+/*
+ ***************************************************************************
+ * MSbus device address space *
+ ***************************************************************************
+ */
+#define MSP_MSB_BASE 0x18000000
+ /* MSbus address start */
+#define MSP_PER_BASE (MSP_MSB_BASE + 0x400000)
+ /* Peripheral device registers */
+#define MSP_MAC0_BASE (MSP_MSB_BASE + 0x600000)
+ /* MAC A device registers */
+#define MSP_MAC1_BASE (MSP_MSB_BASE + 0x700000)
+ /* MAC B device registers */
+#define MSP_MAC_SIZE 0xE0 /* MAC register space */
+
+#define MSP_SEC_BASE (MSP_MSB_BASE + 0x800000)
+ /* Security Engine registers */
+#define MSP_MAC2_BASE (MSP_MSB_BASE + 0x900000)
+ /* MAC C device registers */
+#define MSP_ADSL2_BASE (MSP_MSB_BASE + 0xA80000)
+ /* ADSL2 device registers */
+#define MSP_USB_BASE (MSP_MSB_BASE + 0xB40000)
+ /* USB device registers */
+#define MSP_USB_BASE_START (MSP_MSB_BASE + 0xB40100)
+ /* USB device registers */
+#define MSP_USB_BASE_END (MSP_MSB_BASE + 0xB401FF)
+ /* USB device registers */
+#define MSP_CPUIF_BASE (MSP_MSB_BASE + 0xC00000)
+ /* CPU interface registers */
+
+/* Devices within the MSbus peripheral block */
+#define MSP_UART1_BASE (MSP_PER_BASE + 0x030)
+ /* UART1 controller base */
+#define MSP_SPI_BASE (MSP_PER_BASE + 0x058)
+ /* SPI/MPI control registers */
+#define MSP_TWI_BASE (MSP_PER_BASE + 0x090)
+ /* Two-wire control registers */
+#define MSP_PTIMER_BASE (MSP_PER_BASE + 0x0F0)
+ /* Programmable timer control */
+
+/*
+ ***************************************************************************
+ * Physical Memory configuration address space *
+ ***************************************************************************
+ */
+#define MSP_MEM_CFG_BASE 0x17f00000
+
+#define MSP_MEM_INDIRECT_CTL_10 0x10
+
+/*
+ * Notes:
+ * 1) The SPI registers are split into two blocks, one offset from the
+ * MSP_SPI_BASE by 0x00 and the other offset from the MSP_SPI_BASE by
+ * 0x68. The SPI driver definitions for the register must be aware
+ * of this.
+ * 2) The block copy engine register are divided into two regions, one
+ * for the control/configuration of the engine proper and one for the
+ * values of the descriptors used in the copy process. These have
+ * different base defines (CTRL_BASE vs DESC_BASE)
+ * 3) These constants are for physical addresses which means that they
+ * work correctly with "ioremap" and friends. This means that device
+ * drivers will need to remap these addresses using ioremap and perhaps
+ * the readw/writew macros. Or they could use the regptr() macro
+ * defined below, but the readw/writew calls are the correct thing.
+ * 4) The UARTs have an additional status register offset from the base
+ * address. This register isn't used in the standard 8250 driver but
+ * may be used in other software. Consult the hardware datasheet for
+ * offset details.
+ * 5) For some unknown reason the security engine (MSP_SEC_BASE) registers
+ * start at an offset of 0x84 from the base address but the block of
+ * registers before this is reserved for the security engine. The
+ * driver will have to be aware of this but it makes the register
+ * definitions line up better with the documentation.
+ */
+
+/*
+ ########################################################################
+ # System register definitions. Not associated with a specific device #
+ ########################################################################
+ */
+
+/*
+ * This macro maps the physical register number into uncached space
+ * and (for C code) casts it into a u32 pointer so it can be dereferenced
+ * Normally these would be accessed with ioremap and readX/writeX, but
+ * these are convenient for a lot of internal kernel code.
+ */
+#ifdef __ASSEMBLER__
+ #define regptr(addr) (KSEG1ADDR(addr))
+#else
+ #define regptr(addr) ((volatile u32 *const)(KSEG1ADDR(addr)))
+#endif
+
+/*
+ ***************************************************************************
+ * System Logic and Peripherals (RESET, ELB, etc) registers *
+ ***************************************************************************
+ */
+
+/* System Control register definitions */
+#define DEV_ID_REG regptr(MSP_SLP_BASE + 0x00)
+ /* Device-ID RO */
+#define FWR_ID_REG regptr(MSP_SLP_BASE + 0x04)
+ /* Firmware-ID Register RW */
+#define SYS_ID_REG0 regptr(MSP_SLP_BASE + 0x08)
+ /* System-ID Register-0 RW */
+#define SYS_ID_REG1 regptr(MSP_SLP_BASE + 0x0C)
+ /* System-ID Register-1 RW */
+
+/* System Reset register definitions */
+#define RST_STS_REG regptr(MSP_SLP_BASE + 0x10)
+ /* System Reset Status RO */
+#define RST_SET_REG regptr(MSP_SLP_BASE + 0x14)
+ /* System Set Reset WO */
+#define RST_CLR_REG regptr(MSP_SLP_BASE + 0x18)
+ /* System Clear Reset WO */
+
+/* System Clock Registers */
+#define PCI_SLP_REG regptr(MSP_SLP_BASE + 0x1C)
+ /* PCI clock generator RW */
+#define URT_SLP_REG regptr(MSP_SLP_BASE + 0x20)
+ /* UART clock generator RW */
+/* reserved (MSP_SLP_BASE + 0x24) */
+/* reserved (MSP_SLP_BASE + 0x28) */
+#define PLL1_SLP_REG regptr(MSP_SLP_BASE + 0x2C)
+ /* PLL1 clock generator RW */
+#define PLL0_SLP_REG regptr(MSP_SLP_BASE + 0x30)
+ /* PLL0 clock generator RW */
+#define MIPS_SLP_REG regptr(MSP_SLP_BASE + 0x34)
+ /* MIPS clock generator RW */
+#define VE_SLP_REG regptr(MSP_SLP_BASE + 0x38)
+ /* Voice Eng clock generator RW */
+/* reserved (MSP_SLP_BASE + 0x3C) */
+#define MSB_SLP_REG regptr(MSP_SLP_BASE + 0x40)
+ /* MS-Bus clock generator RW */
+#define SMAC_SLP_REG regptr(MSP_SLP_BASE + 0x44)
+ /* Sec & MAC clock generator RW */
+#define PERF_SLP_REG regptr(MSP_SLP_BASE + 0x48)
+ /* Per & TDM clock generator RW */
+
+/* Interrupt Controller Registers */
+#define SLP_INT_STS_REG regptr(MSP_SLP_BASE + 0x70)
+ /* Interrupt status register RW */
+#define SLP_INT_MSK_REG regptr(MSP_SLP_BASE + 0x74)
+ /* Interrupt enable/mask RW */
+#define SE_MBOX_REG regptr(MSP_SLP_BASE + 0x78)
+ /* Security Engine mailbox RW */
+#define VE_MBOX_REG regptr(MSP_SLP_BASE + 0x7C)
+ /* Voice Engine mailbox RW */
+
+/* ELB Controller Registers */
+#define CS0_CNFG_REG regptr(MSP_SLP_BASE + 0x80)
+ /* ELB CS0 Configuration Reg */
+#define CS0_ADDR_REG regptr(MSP_SLP_BASE + 0x84)
+ /* ELB CS0 Base Address Reg */
+#define CS0_MASK_REG regptr(MSP_SLP_BASE + 0x88)
+ /* ELB CS0 Mask Register */
+#define CS0_ACCESS_REG regptr(MSP_SLP_BASE + 0x8C)
+ /* ELB CS0 access register */
+
+#define CS1_CNFG_REG regptr(MSP_SLP_BASE + 0x90)
+ /* ELB CS1 Configuration Reg */
+#define CS1_ADDR_REG regptr(MSP_SLP_BASE + 0x94)
+ /* ELB CS1 Base Address Reg */
+#define CS1_MASK_REG regptr(MSP_SLP_BASE + 0x98)
+ /* ELB CS1 Mask Register */
+#define CS1_ACCESS_REG regptr(MSP_SLP_BASE + 0x9C)
+ /* ELB CS1 access register */
+
+#define CS2_CNFG_REG regptr(MSP_SLP_BASE + 0xA0)
+ /* ELB CS2 Configuration Reg */
+#define CS2_ADDR_REG regptr(MSP_SLP_BASE + 0xA4)
+ /* ELB CS2 Base Address Reg */
+#define CS2_MASK_REG regptr(MSP_SLP_BASE + 0xA8)
+ /* ELB CS2 Mask Register */
+#define CS2_ACCESS_REG regptr(MSP_SLP_BASE + 0xAC)
+ /* ELB CS2 access register */
+
+#define CS3_CNFG_REG regptr(MSP_SLP_BASE + 0xB0)
+ /* ELB CS3 Configuration Reg */
+#define CS3_ADDR_REG regptr(MSP_SLP_BASE + 0xB4)
+ /* ELB CS3 Base Address Reg */
+#define CS3_MASK_REG regptr(MSP_SLP_BASE + 0xB8)
+ /* ELB CS3 Mask Register */
+#define CS3_ACCESS_REG regptr(MSP_SLP_BASE + 0xBC)
+ /* ELB CS3 access register */
+
+#define CS4_CNFG_REG regptr(MSP_SLP_BASE + 0xC0)
+ /* ELB CS4 Configuration Reg */
+#define CS4_ADDR_REG regptr(MSP_SLP_BASE + 0xC4)
+ /* ELB CS4 Base Address Reg */
+#define CS4_MASK_REG regptr(MSP_SLP_BASE + 0xC8)
+ /* ELB CS4 Mask Register */
+#define CS4_ACCESS_REG regptr(MSP_SLP_BASE + 0xCC)
+ /* ELB CS4 access register */
+
+#define CS5_CNFG_REG regptr(MSP_SLP_BASE + 0xD0)
+ /* ELB CS5 Configuration Reg */
+#define CS5_ADDR_REG regptr(MSP_SLP_BASE + 0xD4)
+ /* ELB CS5 Base Address Reg */
+#define CS5_MASK_REG regptr(MSP_SLP_BASE + 0xD8)
+ /* ELB CS5 Mask Register */
+#define CS5_ACCESS_REG regptr(MSP_SLP_BASE + 0xDC)
+ /* ELB CS5 access register */
+
+/* reserved 0xE0 - 0xE8 */
+#define ELB_1PC_EN_REG regptr(MSP_SLP_BASE + 0xEC)
+ /* ELB single PC card detect */
+
+/* reserved 0xF0 - 0xF8 */
+#define ELB_CLK_CFG_REG regptr(MSP_SLP_BASE + 0xFC)
+ /* SDRAM read/ELB timing Reg */
+
+/* Extended UART status registers */
+#define UART0_STATUS_REG regptr(MSP_UART0_BASE + 0x0c0)
+ /* UART Status Register 0 */
+#define UART1_STATUS_REG regptr(MSP_UART1_BASE + 0x170)
+ /* UART Status Register 1 */
+
+/* Performance monitoring registers */
+#define PERF_MON_CTRL_REG regptr(MSP_SLP_BASE + 0x140)
+ /* Performance monitor control */
+#define PERF_MON_CLR_REG regptr(MSP_SLP_BASE + 0x144)
+ /* Performance monitor clear */
+#define PERF_MON_CNTH_REG regptr(MSP_SLP_BASE + 0x148)
+ /* Perf monitor counter high */
+#define PERF_MON_CNTL_REG regptr(MSP_SLP_BASE + 0x14C)
+ /* Perf monitor counter low */
+
+/* System control registers */
+#define SYS_CTRL_REG regptr(MSP_SLP_BASE + 0x150)
+ /* System control register */
+#define SYS_ERR1_REG regptr(MSP_SLP_BASE + 0x154)
+ /* System Error status 1 */
+#define SYS_ERR2_REG regptr(MSP_SLP_BASE + 0x158)
+ /* System Error status 2 */
+#define SYS_INT_CFG_REG regptr(MSP_SLP_BASE + 0x15C)
+ /* System Interrupt config */
+
+/* Voice Engine Memory configuration */
+#define VE_MEM_REG regptr(MSP_SLP_BASE + 0x17C)
+ /* Voice engine memory config */
+
+/* CPU/SLP Error Status registers */
+#define CPU_ERR1_REG regptr(MSP_SLP_BASE + 0x180)
+ /* CPU/SLP Error status 1 */
+#define CPU_ERR2_REG regptr(MSP_SLP_BASE + 0x184)
+ /* CPU/SLP Error status 1 */
+
+#define EXTENDED_GPIO_REG regptr(MSP_SLP_BASE + 0x188)
+ /* Extended GPIO register */
+
+/* System Error registers */
+#define SLP_ERR_STS_REG regptr(MSP_SLP_BASE + 0x190)
+ /* Int status for SLP errors */
+#define SLP_ERR_MSK_REG regptr(MSP_SLP_BASE + 0x194)
+ /* Int mask for SLP errors */
+#define SLP_ELB_ERST_REG regptr(MSP_SLP_BASE + 0x198)
+ /* External ELB reset */
+#define SLP_BOOT_STS_REG regptr(MSP_SLP_BASE + 0x19C)
+ /* Boot Status */
+
+/* Extended ELB addressing */
+#define CS0_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A0)
+ /* CS0 Extended address */
+#define CS1_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A4)
+ /* CS1 Extended address */
+#define CS2_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A8)
+ /* CS2 Extended address */
+#define CS3_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1AC)
+ /* CS3 Extended address */
+/* reserved 0x1B0 */
+#define CS5_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1B4)
+ /* CS5 Extended address */
+
+/* PLL Adjustment registers */
+#define PLL_LOCK_REG regptr(MSP_SLP_BASE + 0x200)
+ /* PLL0 lock status */
+#define PLL_ARST_REG regptr(MSP_SLP_BASE + 0x204)
+ /* PLL Analog reset status */
+#define PLL0_ADJ_REG regptr(MSP_SLP_BASE + 0x208)
+ /* PLL0 Adjustment value */
+#define PLL1_ADJ_REG regptr(MSP_SLP_BASE + 0x20C)
+ /* PLL1 Adjustment value */
+
+/*
+ ***************************************************************************
+ * Peripheral Register definitions *
+ ***************************************************************************
+ */
+
+/* Peripheral status */
+#define PER_CTRL_REG regptr(MSP_PER_BASE + 0x50)
+ /* Peripheral control register */
+#define PER_STS_REG regptr(MSP_PER_BASE + 0x54)
+ /* Peripheral status register */
+
+/* SPI/MPI Registers */
+#define SMPI_TX_SZ_REG regptr(MSP_PER_BASE + 0x58)
+ /* SPI/MPI Tx Size register */
+#define SMPI_RX_SZ_REG regptr(MSP_PER_BASE + 0x5C)
+ /* SPI/MPI Rx Size register */
+#define SMPI_CTL_REG regptr(MSP_PER_BASE + 0x60)
+ /* SPI/MPI Control register */
+#define SMPI_MS_REG regptr(MSP_PER_BASE + 0x64)
+ /* SPI/MPI Chip Select reg */
+#define SMPI_CORE_DATA_REG regptr(MSP_PER_BASE + 0xC0)
+ /* SPI/MPI Core Data reg */
+#define SMPI_CORE_CTRL_REG regptr(MSP_PER_BASE + 0xC4)
+ /* SPI/MPI Core Control reg */
+#define SMPI_CORE_STAT_REG regptr(MSP_PER_BASE + 0xC8)
+ /* SPI/MPI Core Status reg */
+#define SMPI_CORE_SSEL_REG regptr(MSP_PER_BASE + 0xCC)
+ /* SPI/MPI Core Ssel reg */
+#define SMPI_FIFO_REG regptr(MSP_PER_BASE + 0xD0)
+ /* SPI/MPI Data FIFO reg */
+
+/* Peripheral Block Error Registers */
+#define PER_ERR_STS_REG regptr(MSP_PER_BASE + 0x70)
+ /* Error Bit Status Register */
+#define PER_ERR_MSK_REG regptr(MSP_PER_BASE + 0x74)
+ /* Error Bit Mask Register */
+#define PER_HDR1_REG regptr(MSP_PER_BASE + 0x78)
+ /* Error Header 1 Register */
+#define PER_HDR2_REG regptr(MSP_PER_BASE + 0x7C)
+ /* Error Header 2 Register */
+
+/* Peripheral Block Interrupt Registers */
+#define PER_INT_STS_REG regptr(MSP_PER_BASE + 0x80)
+ /* Interrupt status register */
+#define PER_INT_MSK_REG regptr(MSP_PER_BASE + 0x84)
+ /* Interrupt Mask Register */
+#define GPIO_INT_STS_REG regptr(MSP_PER_BASE + 0x88)
+ /* GPIO interrupt status reg */
+#define GPIO_INT_MSK_REG regptr(MSP_PER_BASE + 0x8C)
+ /* GPIO interrupt MASK Reg */
+
+/* POLO GPIO registers */
+#define POLO_GPIO_DAT1_REG regptr(MSP_PER_BASE + 0x0E0)
+ /* Polo GPIO[8:0] data reg */
+#define POLO_GPIO_CFG1_REG regptr(MSP_PER_BASE + 0x0E4)
+ /* Polo GPIO[7:0] config reg */
+#define POLO_GPIO_CFG2_REG regptr(MSP_PER_BASE + 0x0E8)
+ /* Polo GPIO[15:8] config reg */
+#define POLO_GPIO_OD1_REG regptr(MSP_PER_BASE + 0x0EC)
+ /* Polo GPIO[31:0] output drive */
+#define POLO_GPIO_CFG3_REG regptr(MSP_PER_BASE + 0x170)
+ /* Polo GPIO[23:16] config reg */
+#define POLO_GPIO_DAT2_REG regptr(MSP_PER_BASE + 0x174)
+ /* Polo GPIO[15:9] data reg */
+#define POLO_GPIO_DAT3_REG regptr(MSP_PER_BASE + 0x178)
+ /* Polo GPIO[23:16] data reg */
+#define POLO_GPIO_DAT4_REG regptr(MSP_PER_BASE + 0x17C)
+ /* Polo GPIO[31:24] data reg */
+#define POLO_GPIO_DAT5_REG regptr(MSP_PER_BASE + 0x180)
+ /* Polo GPIO[39:32] data reg */
+#define POLO_GPIO_DAT6_REG regptr(MSP_PER_BASE + 0x184)
+ /* Polo GPIO[47:40] data reg */
+#define POLO_GPIO_DAT7_REG regptr(MSP_PER_BASE + 0x188)
+ /* Polo GPIO[54:48] data reg */
+#define POLO_GPIO_CFG4_REG regptr(MSP_PER_BASE + 0x18C)
+ /* Polo GPIO[31:24] config reg */
+#define POLO_GPIO_CFG5_REG regptr(MSP_PER_BASE + 0x190)
+ /* Polo GPIO[39:32] config reg */
+#define POLO_GPIO_CFG6_REG regptr(MSP_PER_BASE + 0x194)
+ /* Polo GPIO[47:40] config reg */
+#define POLO_GPIO_CFG7_REG regptr(MSP_PER_BASE + 0x198)
+ /* Polo GPIO[54:48] config reg */
+#define POLO_GPIO_OD2_REG regptr(MSP_PER_BASE + 0x19C)
+ /* Polo GPIO[54:32] output drive */
+
+/* Generic GPIO registers */
+#define GPIO_DATA1_REG regptr(MSP_PER_BASE + 0x170)
+ /* GPIO[1:0] data register */
+#define GPIO_DATA2_REG regptr(MSP_PER_BASE + 0x174)
+ /* GPIO[5:2] data register */
+#define GPIO_DATA3_REG regptr(MSP_PER_BASE + 0x178)
+ /* GPIO[9:6] data register */
+#define GPIO_DATA4_REG regptr(MSP_PER_BASE + 0x17C)
+ /* GPIO[15:10] data register */
+#define GPIO_CFG1_REG regptr(MSP_PER_BASE + 0x180)
+ /* GPIO[1:0] config register */
+#define GPIO_CFG2_REG regptr(MSP_PER_BASE + 0x184)
+ /* GPIO[5:2] config register */
+#define GPIO_CFG3_REG regptr(MSP_PER_BASE + 0x188)
+ /* GPIO[9:6] config register */
+#define GPIO_CFG4_REG regptr(MSP_PER_BASE + 0x18C)
+ /* GPIO[15:10] config register */
+#define GPIO_OD_REG regptr(MSP_PER_BASE + 0x190)
+ /* GPIO[15:0] output drive */
+
+/*
+ ***************************************************************************
+ * CPU Interface register definitions *
+ ***************************************************************************
+ */
+#define PCI_FLUSH_REG regptr(MSP_CPUIF_BASE + 0x00)
+ /* PCI-SDRAM queue flush trigger */
+#define OCP_ERR1_REG regptr(MSP_CPUIF_BASE + 0x04)
+ /* OCP Error Attribute 1 */
+#define OCP_ERR2_REG regptr(MSP_CPUIF_BASE + 0x08)
+ /* OCP Error Attribute 2 */
+#define OCP_STS_REG regptr(MSP_CPUIF_BASE + 0x0C)
+ /* OCP Error Status */
+#define CPUIF_PM_REG regptr(MSP_CPUIF_BASE + 0x10)
+ /* CPU policy configuration */
+#define CPUIF_CFG_REG regptr(MSP_CPUIF_BASE + 0x10)
+ /* Misc configuration options */
+
+/* Central Interrupt Controller Registers */
+#define MSP_CIC_BASE (MSP_CPUIF_BASE + 0x8000)
+ /* Central Interrupt registers */
+#define CIC_EXT_CFG_REG regptr(MSP_CIC_BASE + 0x00)
+ /* External interrupt config */
+#define CIC_STS_REG regptr(MSP_CIC_BASE + 0x04)
+ /* CIC Interrupt Status */
+#define CIC_VPE0_MSK_REG regptr(MSP_CIC_BASE + 0x08)
+ /* VPE0 Interrupt Mask */
+#define CIC_VPE1_MSK_REG regptr(MSP_CIC_BASE + 0x0C)
+ /* VPE1 Interrupt Mask */
+#define CIC_TC0_MSK_REG regptr(MSP_CIC_BASE + 0x10)
+ /* Thread Context 0 Int Mask */
+#define CIC_TC1_MSK_REG regptr(MSP_CIC_BASE + 0x14)
+ /* Thread Context 1 Int Mask */
+#define CIC_TC2_MSK_REG regptr(MSP_CIC_BASE + 0x18)
+ /* Thread Context 2 Int Mask */
+#define CIC_TC3_MSK_REG regptr(MSP_CIC_BASE + 0x18)
+ /* Thread Context 3 Int Mask */
+#define CIC_TC4_MSK_REG regptr(MSP_CIC_BASE + 0x18)
+ /* Thread Context 4 Int Mask */
+#define CIC_PCIMSI_STS_REG regptr(MSP_CIC_BASE + 0x18)
+#define CIC_PCIMSI_MSK_REG regptr(MSP_CIC_BASE + 0x18)
+#define CIC_PCIFLSH_REG regptr(MSP_CIC_BASE + 0x18)
+#define CIC_VPE0_SWINT_REG regptr(MSP_CIC_BASE + 0x08)
+
+
+/*
+ ***************************************************************************
+ * Memory controller registers *
+ ***************************************************************************
+ */
+#define MEM_CFG1_REG regptr(MSP_MEM_CFG_BASE + 0x00)
+#define MEM_SS_ADDR regptr(MSP_MEM_CFG_BASE + 0x00)
+#define MEM_SS_DATA regptr(MSP_MEM_CFG_BASE + 0x04)
+#define MEM_SS_WRITE regptr(MSP_MEM_CFG_BASE + 0x08)
+
+/*
+ ***************************************************************************
+ * PCI controller registers *
+ ***************************************************************************
+ */
+#define PCI_BASE_REG regptr(MSP_PCI_BASE + 0x00)
+#define PCI_CONFIG_SPACE_REG regptr(MSP_PCI_BASE + 0x800)
+#define PCI_JTAG_DEVID_REG regptr(MSP_SLP_BASE + 0x13c)
+
+/*
+ ########################################################################
+ # Register content & macro definitions #
+ ########################################################################
+ */
+
+/*
+ ***************************************************************************
+ * DEV_ID defines *
+ ***************************************************************************
+ */
+#define DEV_ID_PCI_DIS (1 << 26) /* Set if PCI disabled */
+#define DEV_ID_PCI_HOST (1 << 20) /* Set if PCI host */
+#define DEV_ID_SINGLE_PC (1 << 19) /* Set if single PC Card */
+#define DEV_ID_FAMILY (0xff << 8) /* family ID code */
+#define POLO_ZEUS_SUB_FAMILY (0x7 << 16) /* sub family for Polo/Zeus */
+
+#define MSPFPGA_ID (0x00 << 8) /* you are on your own here */
+#define MSP5000_ID (0x50 << 8)
+#define MSP4F00_ID (0x4f << 8) /* FPGA version of MSP4200 */
+#define MSP4E00_ID (0x4f << 8) /* FPGA version of MSP7120 */
+#define MSP4200_ID (0x42 << 8)
+#define MSP4000_ID (0x40 << 8)
+#define MSP2XXX_ID (0x20 << 8)
+#define MSPZEUS_ID (0x10 << 8)
+
+#define MSP2004_SUB_ID (0x0 << 16)
+#define MSP2005_SUB_ID (0x1 << 16)
+#define MSP2006_SUB_ID (0x1 << 16)
+#define MSP2007_SUB_ID (0x2 << 16)
+#define MSP2010_SUB_ID (0x3 << 16)
+#define MSP2015_SUB_ID (0x4 << 16)
+#define MSP2020_SUB_ID (0x5 << 16)
+#define MSP2100_SUB_ID (0x6 << 16)
+
+/*
+ ***************************************************************************
+ * RESET defines *
+ ***************************************************************************
+ */
+#define MSP_GR_RST (0x01 << 0) /* Global reset bit */
+#define MSP_MR_RST (0x01 << 1) /* MIPS reset bit */
+#define MSP_PD_RST (0x01 << 2) /* PVC DMA reset bit */
+#define MSP_PP_RST (0x01 << 3) /* PVC reset bit */
+/* reserved */
+#define MSP_EA_RST (0x01 << 6) /* Mac A reset bit */
+#define MSP_EB_RST (0x01 << 7) /* Mac B reset bit */
+#define MSP_SE_RST (0x01 << 8) /* Security Eng reset bit */
+#define MSP_PB_RST (0x01 << 9) /* Per block reset bit */
+#define MSP_EC_RST (0x01 << 10) /* Mac C reset bit */
+#define MSP_TW_RST (0x01 << 11) /* TWI reset bit */
+#define MSP_SPI_RST (0x01 << 12) /* SPI/MPI reset bit */
+#define MSP_U1_RST (0x01 << 13) /* UART1 reset bit */
+#define MSP_U0_RST (0x01 << 14) /* UART0 reset bit */
+
+/*
+ ***************************************************************************
+ * UART defines *
+ ***************************************************************************
+ */
+#define MSP_BASE_BAUD 25000000
+#define MSP_UART_REG_LEN 0x20
+
+/*
+ ***************************************************************************
+ * ELB defines *
+ ***************************************************************************
+ */
+#define PCCARD_32 0x02 /* Set if is PCCARD 32 (Cardbus) */
+#define SINGLE_PCCARD 0x01 /* Set to enable single PC card */
+
+/*
+ ***************************************************************************
+ * CIC defines *
+ ***************************************************************************
+ */
+
+/* CIC_EXT_CFG_REG */
+#define EXT_INT_POL(eirq) (1 << (eirq + 8))
+#define EXT_INT_EDGE(eirq) (1 << eirq)
+
+#define CIC_EXT_SET_TRIGGER_LEVEL(reg, eirq) (reg &= ~EXT_INT_EDGE(eirq))
+#define CIC_EXT_SET_TRIGGER_EDGE(reg, eirq) (reg |= EXT_INT_EDGE(eirq))
+#define CIC_EXT_SET_ACTIVE_HI(reg, eirq) (reg |= EXT_INT_POL(eirq))
+#define CIC_EXT_SET_ACTIVE_LO(reg, eirq) (reg &= ~EXT_INT_POL(eirq))
+#define CIC_EXT_SET_ACTIVE_RISING CIC_EXT_SET_ACTIVE_HI
+#define CIC_EXT_SET_ACTIVE_FALLING CIC_EXT_SET_ACTIVE_LO
+
+#define CIC_EXT_IS_TRIGGER_LEVEL(reg, eirq) \
+ ((reg & EXT_INT_EDGE(eirq)) == 0)
+#define CIC_EXT_IS_TRIGGER_EDGE(reg, eirq) (reg & EXT_INT_EDGE(eirq))
+#define CIC_EXT_IS_ACTIVE_HI(reg, eirq) (reg & EXT_INT_POL(eirq))
+#define CIC_EXT_IS_ACTIVE_LO(reg, eirq) \
+ ((reg & EXT_INT_POL(eirq)) == 0)
+#define CIC_EXT_IS_ACTIVE_RISING CIC_EXT_IS_ACTIVE_HI
+#define CIC_EXT_IS_ACTIVE_FALLING CIC_EXT_IS_ACTIVE_LO
+
+/*
+ ***************************************************************************
+ * Memory Controller defines *
+ ***************************************************************************
+ */
+
+/* Indirect memory controller registers */
+#define DDRC_CFG(n) (n)
+#define DDRC_DEBUG(n) (0x04 + n)
+#define DDRC_CTL(n) (0x40 + n)
+
+/* Macro to perform DDRC indirect write */
+#define DDRC_INDIRECT_WRITE(reg, mask, value) \
+({ \
+ *MEM_SS_ADDR = (((mask) & 0xf) << 8) | ((reg) & 0xff); \
+ *MEM_SS_DATA = (value); \
+ *MEM_SS_WRITE = 1; \
+})
+
+/*
+ ***************************************************************************
+ * SPI/MPI Mode *
+ ***************************************************************************
+ */
+#define SPI_MPI_RX_BUSY 0x00008000 /* SPI/MPI Receive Busy */
+#define SPI_MPI_FIFO_EMPTY 0x00004000 /* SPI/MPI Fifo Empty */
+#define SPI_MPI_TX_BUSY 0x00002000 /* SPI/MPI Transmit Busy */
+#define SPI_MPI_FIFO_FULL 0x00001000 /* SPI/MPU FIFO full */
+
+/*
+ ***************************************************************************
+ * SPI/MPI Control Register *
+ ***************************************************************************
+ */
+#define SPI_MPI_RX_START 0x00000004 /* Start receive command */
+#define SPI_MPI_FLUSH_Q 0x00000002 /* Flush SPI/MPI Queue */
+#define SPI_MPI_TX_START 0x00000001 /* Start Transmit Command */
+
+#endif /* !_ASM_MSP_REGS_H */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_slp_int.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_slp_int.h
new file mode 100644
index 00000000000..96d4c8ce8c8
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_slp_int.h
@@ -0,0 +1,141 @@
+/*
+ * Defines for the MSP interrupt controller.
+ *
+ * Copyright (C) 1999 MIPS Technologies, Inc. All rights reserved.
+ * Author: Carsten Langgaard, carstenl@mips.com
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ */
+
+#ifndef _MSP_SLP_INT_H
+#define _MSP_SLP_INT_H
+
+/*
+ * The PMC-Sierra SLP interrupts are arranged in a 3 level cascaded
+ * hierarchical system. The first level are the direct MIPS interrupts
+ * and are assigned the interrupt range 0-7. The second level is the SLM
+ * interrupt controller and is assigned the range 8-39. The third level
+ * comprises the Peripherial block, the PCI block, the PCI MSI block and
+ * the SLP. The PCI interrupts and the SLP errors are handled by the
+ * relevant subsystems so the core interrupt code needs only concern
+ * itself with the Peripheral block. These are assigned interrupts in
+ * the range 40-71.
+ */
+
+/*
+ * IRQs directly connected to CPU
+ */
+#define MSP_MIPS_INTBASE 0
+#define MSP_INT_SW0 0 /* IRQ for swint0, C_SW0 */
+#define MSP_INT_SW1 1 /* IRQ for swint1, C_SW1 */
+#define MSP_INT_MAC0 2 /* IRQ for MAC 0, C_IRQ0 */
+#define MSP_INT_MAC1 3 /* IRQ for MAC 1, C_IRQ1 */
+#define MSP_INT_C_IRQ2 4 /* Wired off, C_IRQ2 */
+#define MSP_INT_VE 5 /* IRQ for Voice Engine, C_IRQ3 */
+#define MSP_INT_SLP 6 /* IRQ for SLM block, C_IRQ4 */
+#define MSP_INT_TIMER 7 /* IRQ for the MIPS timer, C_IRQ5 */
+
+/*
+ * IRQs cascaded on CPU interrupt 4 (CAUSE bit 12, C_IRQ4)
+ * These defines should be tied to the register definition for the SLM
+ * interrupt routine. For now, just use hard-coded values.
+ */
+#define MSP_SLP_INTBASE (MSP_MIPS_INTBASE + 8)
+#define MSP_INT_EXT0 (MSP_SLP_INTBASE + 0)
+ /* External interrupt 0 */
+#define MSP_INT_EXT1 (MSP_SLP_INTBASE + 1)
+ /* External interrupt 1 */
+#define MSP_INT_EXT2 (MSP_SLP_INTBASE + 2)
+ /* External interrupt 2 */
+#define MSP_INT_EXT3 (MSP_SLP_INTBASE + 3)
+ /* External interrupt 3 */
+/* Reserved 4-7 */
+
+/*
+ *************************************************************************
+ * DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER *
+ * Some MSP produces have this interrupt labelled as Voice and some are *
+ * SEC mbox ... *
+ *************************************************************************
+ */
+#define MSP_INT_SLP_VE (MSP_SLP_INTBASE + 8)
+ /* Cascaded IRQ for Voice Engine*/
+#define MSP_INT_SLP_TDM (MSP_SLP_INTBASE + 9)
+ /* TDM interrupt */
+#define MSP_INT_SLP_MAC0 (MSP_SLP_INTBASE + 10)
+ /* Cascaded IRQ for MAC 0 */
+#define MSP_INT_SLP_MAC1 (MSP_SLP_INTBASE + 11)
+ /* Cascaded IRQ for MAC 1 */
+#define MSP_INT_SEC (MSP_SLP_INTBASE + 12)
+ /* IRQ for security engine */
+#define MSP_INT_PER (MSP_SLP_INTBASE + 13)
+ /* Peripheral interrupt */
+#define MSP_INT_TIMER0 (MSP_SLP_INTBASE + 14)
+ /* SLP timer 0 */
+#define MSP_INT_TIMER1 (MSP_SLP_INTBASE + 15)
+ /* SLP timer 1 */
+#define MSP_INT_TIMER2 (MSP_SLP_INTBASE + 16)
+ /* SLP timer 2 */
+#define MSP_INT_SLP_TIMER (MSP_SLP_INTBASE + 17)
+ /* Cascaded MIPS timer */
+#define MSP_INT_BLKCP (MSP_SLP_INTBASE + 18)
+ /* Block Copy */
+#define MSP_INT_UART0 (MSP_SLP_INTBASE + 19)
+ /* UART 0 */
+#define MSP_INT_PCI (MSP_SLP_INTBASE + 20)
+ /* PCI subsystem */
+#define MSP_INT_PCI_DBELL (MSP_SLP_INTBASE + 21)
+ /* PCI doorbell */
+#define MSP_INT_PCI_MSI (MSP_SLP_INTBASE + 22)
+ /* PCI Message Signal */
+#define MSP_INT_PCI_BC0 (MSP_SLP_INTBASE + 23)
+ /* PCI Block Copy 0 */
+#define MSP_INT_PCI_BC1 (MSP_SLP_INTBASE + 24)
+ /* PCI Block Copy 1 */
+#define MSP_INT_SLP_ERR (MSP_SLP_INTBASE + 25)
+ /* SLP error condition */
+#define MSP_INT_MAC2 (MSP_SLP_INTBASE + 26)
+ /* IRQ for MAC2 */
+/* Reserved 26-31 */
+
+/*
+ * IRQs cascaded on SLP PER interrupt (MSP_INT_PER)
+ */
+#define MSP_PER_INTBASE (MSP_SLP_INTBASE + 32)
+/* Reserved 0-1 */
+#define MSP_INT_UART1 (MSP_PER_INTBASE + 2)
+ /* UART 1 */
+/* Reserved 3-5 */
+#define MSP_INT_2WIRE (MSP_PER_INTBASE + 6)
+ /* 2-wire */
+#define MSP_INT_TM0 (MSP_PER_INTBASE + 7)
+ /* Peripheral timer block out 0 */
+#define MSP_INT_TM1 (MSP_PER_INTBASE + 8)
+ /* Peripheral timer block out 1 */
+/* Reserved 9 */
+#define MSP_INT_SPRX (MSP_PER_INTBASE + 10)
+ /* SPI RX complete */
+#define MSP_INT_SPTX (MSP_PER_INTBASE + 11)
+ /* SPI TX complete */
+#define MSP_INT_GPIO (MSP_PER_INTBASE + 12)
+ /* GPIO */
+#define MSP_INT_PER_ERR (MSP_PER_INTBASE + 13)
+ /* Peripheral error */
+/* Reserved 14-31 */
+
+#endif /* !_MSP_SLP_INT_H */
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/war.h b/arch/mips/include/asm/pmc-sierra/msp71xx/war.h
new file mode 100644
index 00000000000..0bf48fc1892
--- /dev/null
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/war.h
@@ -0,0 +1,28 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_PMC_SIERRA_WAR_H
+#define __ASM_MIPS_PMC_SIERRA_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#if defined(CONFIG_PMC_MSP7120_EVAL) || defined(CONFIG_PMC_MSP7120_GW) || \
+ defined(CONFIG_PMC_MSP7120_FPGA)
+#define MIPS34K_MISSED_ITLB_WAR 1
+#endif
+
+#endif /* __ASM_MIPS_PMC_SIERRA_WAR_H */
diff --git a/arch/mips/include/asm/pmon.h b/arch/mips/include/asm/pmon.h
new file mode 100644
index 00000000000..6ad519189ce
--- /dev/null
+++ b/arch/mips/include/asm/pmon.h
@@ -0,0 +1,46 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004 by Ralf Baechle
+ *
+ * The cpustart method is a PMC-Sierra's function to start the secondary CPU.
+ * Stock PMON 2000 has the smpfork, semlock and semunlock methods instead.
+ */
+#ifndef _ASM_PMON_H
+#define _ASM_PMON_H
+
+struct callvectors {
+ int (*open) (char*, int, int);
+ int (*close) (int);
+ int (*read) (int, void*, int);
+ int (*write) (int, void*, int);
+ off_t (*lseek) (int, off_t, int);
+ int (*printf) (const char*, ...);
+ void (*cacheflush) (void);
+ char* (*gets) (char*);
+ union {
+ int (*smpfork) (unsigned long cp, char *sp);
+ int (*cpustart) (long, void (*)(void), void *, long);
+ } _s;
+ int (*semlock) (int sem);
+ void (*semunlock) (int sem);
+};
+
+extern struct callvectors *debug_vectors;
+
+#define pmon_open(name, flags, mode) debug_vectors->open(name, flage, mode)
+#define pmon_close(fd) debug_vectors->close(fd)
+#define pmon_read(fd, buf, count) debug_vectors->read(fd, buf, count)
+#define pmon_write(fd, buf, count) debug_vectors->write(fd, buf, count)
+#define pmon_lseek(fd, off, whence) debug_vectors->lseek(fd, off, whence)
+#define pmon_printf(fmt...) debug_vectors->printf(fmt)
+#define pmon_cacheflush() debug_vectors->cacheflush()
+#define pmon_gets(s) debug_vectors->gets(s)
+#define pmon_cpustart(n, f, sp, gp) debug_vectors->_s.cpustart(n, f, sp, gp)
+#define pmon_smpfork(cp, sp) debug_vectors->_s.smpfork(cp, sp)
+#define pmon_semlock(sem) debug_vectors->semlock(sem)
+#define pmon_semunlock(sem) debug_vectors->semunlock(sem)
+
+#endif /* _ASM_PMON_H */
diff --git a/arch/mips/include/asm/poll.h b/arch/mips/include/asm/poll.h
new file mode 100644
index 00000000000..47b95208043
--- /dev/null
+++ b/arch/mips/include/asm/poll.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_POLL_H
+#define __ASM_POLL_H
+
+#define POLLWRNORM POLLOUT
+#define POLLWRBAND 0x0100
+
+#include <asm-generic/poll.h>
+
+#endif /* __ASM_POLL_H */
diff --git a/arch/mips/include/asm/posix_types.h b/arch/mips/include/asm/posix_types.h
new file mode 100644
index 00000000000..c200102c858
--- /dev/null
+++ b/arch/mips/include/asm/posix_types.h
@@ -0,0 +1,144 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 97, 98, 99, 2000 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_POSIX_TYPES_H
+#define _ASM_POSIX_TYPES_H
+
+#include <asm/sgidefs.h>
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc. Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long __kernel_ino_t;
+typedef unsigned int __kernel_mode_t;
+#if (_MIPS_SZLONG == 32)
+typedef unsigned long __kernel_nlink_t;
+#endif
+#if (_MIPS_SZLONG == 64)
+typedef unsigned int __kernel_nlink_t;
+#endif
+typedef long __kernel_off_t;
+typedef int __kernel_pid_t;
+typedef int __kernel_ipc_pid_t;
+typedef unsigned int __kernel_uid_t;
+typedef unsigned int __kernel_gid_t;
+#if (_MIPS_SZLONG == 32)
+typedef unsigned int __kernel_size_t;
+typedef int __kernel_ssize_t;
+typedef int __kernel_ptrdiff_t;
+#endif
+#if (_MIPS_SZLONG == 64)
+typedef unsigned long __kernel_size_t;
+typedef long __kernel_ssize_t;
+typedef long __kernel_ptrdiff_t;
+#endif
+typedef long __kernel_time_t;
+typedef long __kernel_suseconds_t;
+typedef long __kernel_clock_t;
+typedef int __kernel_timer_t;
+typedef int __kernel_clockid_t;
+typedef long __kernel_daddr_t;
+typedef char * __kernel_caddr_t;
+
+typedef unsigned short __kernel_uid16_t;
+typedef unsigned short __kernel_gid16_t;
+typedef unsigned int __kernel_uid32_t;
+typedef unsigned int __kernel_gid32_t;
+typedef __kernel_uid_t __kernel_old_uid_t;
+typedef __kernel_gid_t __kernel_old_gid_t;
+typedef unsigned int __kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long __kernel_loff_t;
+#endif
+
+typedef struct {
+#if (_MIPS_SZLONG == 32)
+ long val[2];
+#endif
+#if (_MIPS_SZLONG == 64)
+ int val[2];
+#endif
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__)
+
+#undef __FD_SET
+static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+ unsigned long __tmp = __fd / __NFDBITS;
+ unsigned long __rem = __fd % __NFDBITS;
+ __fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
+}
+
+#undef __FD_CLR
+static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+ unsigned long __tmp = __fd / __NFDBITS;
+ unsigned long __rem = __fd % __NFDBITS;
+ __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
+}
+
+#undef __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
+{
+ unsigned long __tmp = __fd / __NFDBITS;
+ unsigned long __rem = __fd % __NFDBITS;
+ return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *__p)
+{
+ unsigned long *__tmp = __p->fds_bits;
+ int __i;
+
+ if (__builtin_constant_p(__FDSET_LONGS)) {
+ switch (__FDSET_LONGS) {
+ case 16:
+ __tmp[ 0] = 0; __tmp[ 1] = 0;
+ __tmp[ 2] = 0; __tmp[ 3] = 0;
+ __tmp[ 4] = 0; __tmp[ 5] = 0;
+ __tmp[ 6] = 0; __tmp[ 7] = 0;
+ __tmp[ 8] = 0; __tmp[ 9] = 0;
+ __tmp[10] = 0; __tmp[11] = 0;
+ __tmp[12] = 0; __tmp[13] = 0;
+ __tmp[14] = 0; __tmp[15] = 0;
+ return;
+
+ case 8:
+ __tmp[ 0] = 0; __tmp[ 1] = 0;
+ __tmp[ 2] = 0; __tmp[ 3] = 0;
+ __tmp[ 4] = 0; __tmp[ 5] = 0;
+ __tmp[ 6] = 0; __tmp[ 7] = 0;
+ return;
+
+ case 4:
+ __tmp[ 0] = 0; __tmp[ 1] = 0;
+ __tmp[ 2] = 0; __tmp[ 3] = 0;
+ return;
+ }
+ }
+ __i = __FDSET_LONGS;
+ while (__i) {
+ __i--;
+ *__tmp = 0;
+ __tmp++;
+ }
+}
+
+#endif /* defined(__KERNEL__) */
+
+#endif /* _ASM_POSIX_TYPES_H */
diff --git a/arch/mips/include/asm/prefetch.h b/arch/mips/include/asm/prefetch.h
new file mode 100644
index 00000000000..17850834ccb
--- /dev/null
+++ b/arch/mips/include/asm/prefetch.h
@@ -0,0 +1,87 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 by Ralf Baechle
+ */
+#ifndef __ASM_PREFETCH_H
+#define __ASM_PREFETCH_H
+
+
+/*
+ * R5000 and RM5200 implements pref and prefx instructions but they're nops, so
+ * rather than wasting time we pretend these processors don't support
+ * prefetching at all.
+ *
+ * R5432 implements Load, Store, LoadStreamed, StoreStreamed, LoadRetained,
+ * StoreRetained and WriteBackInvalidate but not Pref_PrepareForStore.
+ *
+ * Hell (and the book on my shelf I can't open ...) know what the R8000 does.
+ *
+ * RM7000 version 1.0 interprets all hints as Pref_Load; version 2.0 implements
+ * Pref_PrepareForStore also.
+ *
+ * RM9000 is MIPS IV but implements prefetching like MIPS32/MIPS64; it's
+ * Pref_WriteBackInvalidate is a nop and Pref_PrepareForStore is broken in
+ * current versions due to erratum G105.
+ *
+ * VR7701 only implements the Load prefetch.
+ *
+ * Finally MIPS32 and MIPS64 implement all of the following hints.
+ */
+
+#define Pref_Load 0
+#define Pref_Store 1
+ /* 2 and 3 are reserved */
+#define Pref_LoadStreamed 4
+#define Pref_StoreStreamed 5
+#define Pref_LoadRetained 6
+#define Pref_StoreRetained 7
+ /* 8 ... 24 are reserved */
+#define Pref_WriteBackInvalidate 25
+#define Pref_PrepareForStore 30
+
+#ifdef __ASSEMBLY__
+
+ .macro __pref hint addr
+#ifdef CONFIG_CPU_HAS_PREFETCH
+ pref \hint, \addr
+#endif
+ .endm
+
+ .macro pref_load addr
+ __pref Pref_Load, \addr
+ .endm
+
+ .macro pref_store addr
+ __pref Pref_Store, \addr
+ .endm
+
+ .macro pref_load_streamed addr
+ __pref Pref_LoadStreamed, \addr
+ .endm
+
+ .macro pref_store_streamed addr
+ __pref Pref_StoreStreamed, \addr
+ .endm
+
+ .macro pref_load_retained addr
+ __pref Pref_LoadRetained, \addr
+ .endm
+
+ .macro pref_store_retained addr
+ __pref Pref_StoreRetained, \addr
+ .endm
+
+ .macro pref_wback_inv addr
+ __pref Pref_WriteBackInvalidate, \addr
+ .endm
+
+ .macro pref_prepare_for_store addr
+ __pref Pref_PrepareForStore, \addr
+ .endm
+
+#endif
+
+#endif /* __ASM_PREFETCH_H */
diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h
new file mode 100644
index 00000000000..18ee58e3944
--- /dev/null
+++ b/arch/mips/include/asm/processor.h
@@ -0,0 +1,283 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 Waldorf GMBH
+ * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2001, 2002, 2003 Ralf Baechle
+ * Copyright (C) 1996 Paul M. Antoine
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_PROCESSOR_H
+#define _ASM_PROCESSOR_H
+
+#include <linux/cpumask.h>
+#include <linux/threads.h>
+
+#include <asm/cachectl.h>
+#include <asm/cpu.h>
+#include <asm/cpu-info.h>
+#include <asm/mipsregs.h>
+#include <asm/prefetch.h>
+#include <asm/system.h>
+
+/*
+ * Return current * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+/*
+ * System setup and hardware flags..
+ */
+extern void (*cpu_wait)(void);
+
+extern unsigned int vced_count, vcei_count;
+
+#ifdef CONFIG_32BIT
+/*
+ * User space process size: 2GB. This is hardcoded into a few places,
+ * so don't change it unless you know what you are doing.
+ */
+#define TASK_SIZE 0x7fff8000UL
+#define STACK_TOP TASK_SIZE
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE ((TASK_SIZE / 3) & ~(PAGE_SIZE))
+#endif
+
+#ifdef CONFIG_64BIT
+/*
+ * User space process size: 1TB. This is hardcoded into a few places,
+ * so don't change it unless you know what you are doing. TASK_SIZE
+ * is limited to 1TB by the R4000 architecture; R10000 and better can
+ * support 16TB; the architectural reserve for future expansion is
+ * 8192EB ...
+ */
+#define TASK_SIZE32 0x7fff8000UL
+#define TASK_SIZE 0x10000000000UL
+#define STACK_TOP \
+ (test_thread_flag(TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE \
+ (test_thread_flag(TIF_32BIT_ADDR) ? \
+ PAGE_ALIGN(TASK_SIZE32 / 3) : PAGE_ALIGN(TASK_SIZE / 3))
+#define TASK_SIZE_OF(tsk) \
+ (test_tsk_thread_flag(tsk, TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE)
+#endif
+
+#ifdef __KERNEL__
+#define STACK_TOP_MAX TASK_SIZE
+#endif
+
+#define NUM_FPU_REGS 32
+
+typedef __u64 fpureg_t;
+
+/*
+ * It would be nice to add some more fields for emulator statistics, but there
+ * are a number of fixed offsets in offset.h and elsewhere that would have to
+ * be recalculated by hand. So the additional information will be private to
+ * the FPU emulator for now. See asm-mips/fpu_emulator.h.
+ */
+
+struct mips_fpu_struct {
+ fpureg_t fpr[NUM_FPU_REGS];
+ unsigned int fcr31;
+};
+
+#define NUM_DSP_REGS 6
+
+typedef __u32 dspreg_t;
+
+struct mips_dsp_state {
+ dspreg_t dspr[NUM_DSP_REGS];
+ unsigned int dspcontrol;
+};
+
+#define INIT_CPUMASK { \
+ {0,} \
+}
+
+struct mips3264_watch_reg_state {
+ /* The width of watchlo is 32 in a 32 bit kernel and 64 in a
+ 64 bit kernel. We use unsigned long as it has the same
+ property. */
+ unsigned long watchlo[NUM_WATCH_REGS];
+ /* Only the mask and IRW bits from watchhi. */
+ u16 watchhi[NUM_WATCH_REGS];
+};
+
+union mips_watch_reg_state {
+ struct mips3264_watch_reg_state mips3264;
+};
+
+typedef struct {
+ unsigned long seg;
+} mm_segment_t;
+
+#define ARCH_MIN_TASKALIGN 8
+
+struct mips_abi;
+
+/*
+ * If you change thread_struct remember to change the #defines below too!
+ */
+struct thread_struct {
+ /* Saved main processor registers. */
+ unsigned long reg16;
+ unsigned long reg17, reg18, reg19, reg20, reg21, reg22, reg23;
+ unsigned long reg29, reg30, reg31;
+
+ /* Saved cp0 stuff. */
+ unsigned long cp0_status;
+
+ /* Saved fpu/fpu emulator stuff. */
+ struct mips_fpu_struct fpu;
+#ifdef CONFIG_MIPS_MT_FPAFF
+ /* Emulated instruction count */
+ unsigned long emulated_fp;
+ /* Saved per-thread scheduler affinity mask */
+ cpumask_t user_cpus_allowed;
+#endif /* CONFIG_MIPS_MT_FPAFF */
+
+ /* Saved state of the DSP ASE, if available. */
+ struct mips_dsp_state dsp;
+
+ /* Saved watch register state, if available. */
+ union mips_watch_reg_state watch;
+
+ /* Other stuff associated with the thread. */
+ unsigned long cp0_badvaddr; /* Last user fault */
+ unsigned long cp0_baduaddr; /* Last kernel fault accessing USEG */
+ unsigned long error_code;
+ unsigned long trap_no;
+ unsigned long irix_trampoline; /* Wheee... */
+ unsigned long irix_oldctx;
+ struct mips_abi *abi;
+};
+
+#ifdef CONFIG_MIPS_MT_FPAFF
+#define FPAFF_INIT \
+ .emulated_fp = 0, \
+ .user_cpus_allowed = INIT_CPUMASK,
+#else
+#define FPAFF_INIT
+#endif /* CONFIG_MIPS_MT_FPAFF */
+
+#define INIT_THREAD { \
+ /* \
+ * Saved main processor registers \
+ */ \
+ .reg16 = 0, \
+ .reg17 = 0, \
+ .reg18 = 0, \
+ .reg19 = 0, \
+ .reg20 = 0, \
+ .reg21 = 0, \
+ .reg22 = 0, \
+ .reg23 = 0, \
+ .reg29 = 0, \
+ .reg30 = 0, \
+ .reg31 = 0, \
+ /* \
+ * Saved cp0 stuff \
+ */ \
+ .cp0_status = 0, \
+ /* \
+ * Saved FPU/FPU emulator stuff \
+ */ \
+ .fpu = { \
+ .fpr = {0,}, \
+ .fcr31 = 0, \
+ }, \
+ /* \
+ * FPU affinity state (null if not FPAFF) \
+ */ \
+ FPAFF_INIT \
+ /* \
+ * Saved DSP stuff \
+ */ \
+ .dsp = { \
+ .dspr = {0, }, \
+ .dspcontrol = 0, \
+ }, \
+ /* \
+ * saved watch register stuff \
+ */ \
+ .watch = {{{0,},},}, \
+ /* \
+ * Other stuff associated with the process \
+ */ \
+ .cp0_badvaddr = 0, \
+ .cp0_baduaddr = 0, \
+ .error_code = 0, \
+ .trap_no = 0, \
+ .irix_trampoline = 0, \
+ .irix_oldctx = 0, \
+}
+
+struct task_struct;
+
+/* Free all resources held by a thread. */
+#define release_thread(thread) do { } while(0)
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk) do { } while (0)
+
+extern long kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+extern unsigned long thread_saved_pc(struct task_struct *tsk);
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ */
+extern void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp);
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define __KSTK_TOS(tsk) ((unsigned long)task_stack_page(tsk) + THREAD_SIZE - 32)
+#define task_pt_regs(tsk) ((struct pt_regs *)__KSTK_TOS(tsk) - 1)
+#define KSTK_EIP(tsk) (task_pt_regs(tsk)->cp0_epc)
+#define KSTK_ESP(tsk) (task_pt_regs(tsk)->regs[29])
+#define KSTK_STATUS(tsk) (task_pt_regs(tsk)->cp0_status)
+
+#define cpu_relax() barrier()
+
+/*
+ * Return_address is a replacement for __builtin_return_address(count)
+ * which on certain architectures cannot reasonably be implemented in GCC
+ * (MIPS, Alpha) or is unuseable with -fomit-frame-pointer (i386).
+ * Note that __builtin_return_address(x>=1) is forbidden because GCC
+ * aborts compilation on some CPUs. It's simply not possible to unwind
+ * some CPU's stackframes.
+ *
+ * __builtin_return_address works only for non-leaf functions. We avoid the
+ * overhead of a function call by forcing the compiler to save the return
+ * address register on the stack.
+ */
+#define return_address() ({__asm__ __volatile__("":::"$31");__builtin_return_address(0);})
+
+#ifdef CONFIG_CPU_HAS_PREFETCH
+
+#define ARCH_HAS_PREFETCH
+
+static inline void prefetch(const void *addr)
+{
+ __asm__ __volatile__(
+ " .set mips4 \n"
+ " pref %0, (%1) \n"
+ " .set mips0 \n"
+ :
+ : "i" (Pref_Load), "r" (addr));
+}
+
+#endif
+
+#endif /* _ASM_PROCESSOR_H */
diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h
new file mode 100644
index 00000000000..9c22571b160
--- /dev/null
+++ b/arch/mips/include/asm/ptrace.h
@@ -0,0 +1,154 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_PTRACE_H
+#define _ASM_PTRACE_H
+
+#ifdef CONFIG_64BIT
+#define __ARCH_WANT_COMPAT_SYS_PTRACE
+#endif
+
+/* 0 - 31 are integer registers, 32 - 63 are fp registers. */
+#define FPR_BASE 32
+#define PC 64
+#define CAUSE 65
+#define BADVADDR 66
+#define MMHI 67
+#define MMLO 68
+#define FPC_CSR 69
+#define FPC_EIR 70
+#define DSP_BASE 71 /* 3 more hi / lo register pairs */
+#define DSP_CONTROL 77
+#define ACX 78
+
+/*
+ * This struct defines the way the registers are stored on the stack during a
+ * system call/exception. As usual the registers k0/k1 aren't being saved.
+ */
+struct pt_regs {
+#ifdef CONFIG_32BIT
+ /* Pad bytes for argument save space on the stack. */
+ unsigned long pad0[6];
+#endif
+
+ /* Saved main processor registers. */
+ unsigned long regs[32];
+
+ /* Saved special registers. */
+ unsigned long cp0_status;
+ unsigned long hi;
+ unsigned long lo;
+#ifdef CONFIG_CPU_HAS_SMARTMIPS
+ unsigned long acx;
+#endif
+ unsigned long cp0_badvaddr;
+ unsigned long cp0_cause;
+ unsigned long cp0_epc;
+#ifdef CONFIG_MIPS_MT_SMTC
+ unsigned long cp0_tcstatus;
+#endif /* CONFIG_MIPS_MT_SMTC */
+} __attribute__ ((aligned (8)));
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS 12
+#define PTRACE_SETREGS 13
+#define PTRACE_GETFPREGS 14
+#define PTRACE_SETFPREGS 15
+/* #define PTRACE_GETFPXREGS 18 */
+/* #define PTRACE_SETFPXREGS 19 */
+
+#define PTRACE_OLDSETOPTIONS 21
+
+#define PTRACE_GET_THREAD_AREA 25
+#define PTRACE_SET_THREAD_AREA 26
+
+/* Calls to trace a 64bit program from a 32bit program. */
+#define PTRACE_PEEKTEXT_3264 0xc0
+#define PTRACE_PEEKDATA_3264 0xc1
+#define PTRACE_POKETEXT_3264 0xc2
+#define PTRACE_POKEDATA_3264 0xc3
+#define PTRACE_GET_THREAD_AREA_3264 0xc4
+
+/* Read and write watchpoint registers. */
+enum pt_watch_style {
+ pt_watch_style_mips32,
+ pt_watch_style_mips64
+};
+struct mips32_watch_regs {
+ uint32_t watchlo[8];
+ /* Lower 16 bits of watchhi. */
+ uint16_t watchhi[8];
+ /* Valid mask and I R W bits.
+ * bit 0 -- 1 if W bit is usable.
+ * bit 1 -- 1 if R bit is usable.
+ * bit 2 -- 1 if I bit is usable.
+ * bits 3 - 11 -- Valid watchhi mask bits.
+ */
+ uint16_t watch_masks[8];
+ /* The number of valid watch register pairs. */
+ uint32_t num_valid;
+} __attribute__((aligned(8)));
+
+struct mips64_watch_regs {
+ uint64_t watchlo[8];
+ uint16_t watchhi[8];
+ uint16_t watch_masks[8];
+ uint32_t num_valid;
+} __attribute__((aligned(8)));
+
+struct pt_watch_regs {
+ enum pt_watch_style style;
+ union {
+ struct mips32_watch_regs mips32;
+ struct mips32_watch_regs mips64;
+ };
+};
+
+#define PTRACE_GET_WATCH_REGS 0xd0
+#define PTRACE_SET_WATCH_REGS 0xd1
+
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <asm/isadep.h>
+
+struct task_struct;
+
+extern int ptrace_getregs(struct task_struct *child, __s64 __user *data);
+extern int ptrace_setregs(struct task_struct *child, __s64 __user *data);
+
+extern int ptrace_getfpregs(struct task_struct *child, __u32 __user *data);
+extern int ptrace_setfpregs(struct task_struct *child, __u32 __user *data);
+
+extern int ptrace_get_watch_regs(struct task_struct *child,
+ struct pt_watch_regs __user *addr);
+extern int ptrace_set_watch_regs(struct task_struct *child,
+ struct pt_watch_regs __user *addr);
+
+/*
+ * Does the process account for user or for system time?
+ */
+#define user_mode(regs) (((regs)->cp0_status & KU_MASK) == KU_USER)
+
+#define instruction_pointer(regs) ((regs)->cp0_epc)
+#define profile_pc(regs) instruction_pointer(regs)
+
+extern asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit);
+
+extern NORET_TYPE void die(const char *, const struct pt_regs *) ATTRIB_NORET;
+
+static inline void die_if_kernel(const char *str, const struct pt_regs *regs)
+{
+ if (unlikely(!user_mode(regs)))
+ die(str, regs);
+}
+
+#endif
+
+#endif /* _ASM_PTRACE_H */
diff --git a/arch/mips/include/asm/r4k-timer.h b/arch/mips/include/asm/r4k-timer.h
new file mode 100644
index 00000000000..a37d12b3b61
--- /dev/null
+++ b/arch/mips/include/asm/r4k-timer.h
@@ -0,0 +1,30 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 by Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef __ASM_R4K_TYPES_H
+#define __ASM_R4K_TYPES_H
+
+#include <linux/compiler.h>
+
+#ifdef CONFIG_SYNC_R4K
+
+extern void synchronise_count_master(void);
+extern void synchronise_count_slave(void);
+
+#else
+
+static inline void synchronise_count_master(void)
+{
+}
+
+static inline void synchronise_count_slave(void)
+{
+}
+
+#endif
+
+#endif /* __ASM_R4K_TYPES_H */
diff --git a/arch/mips/include/asm/r4kcache.h b/arch/mips/include/asm/r4kcache.h
new file mode 100644
index 00000000000..4c140db3678
--- /dev/null
+++ b/arch/mips/include/asm/r4kcache.h
@@ -0,0 +1,443 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Inline assembly cache operations.
+ *
+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 1997 - 2002 Ralf Baechle (ralf@gnu.org)
+ * Copyright (C) 2004 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef _ASM_R4KCACHE_H
+#define _ASM_R4KCACHE_H
+
+#include <asm/asm.h>
+#include <asm/cacheops.h>
+#include <asm/cpu-features.h>
+#include <asm/mipsmtregs.h>
+
+/*
+ * This macro return a properly sign-extended address suitable as base address
+ * for indexed cache operations. Two issues here:
+ *
+ * - The MIPS32 and MIPS64 specs permit an implementation to directly derive
+ * the index bits from the virtual address. This breaks with tradition
+ * set by the R4000. To keep unpleasant surprises from happening we pick
+ * an address in KSEG0 / CKSEG0.
+ * - We need a properly sign extended address for 64-bit code. To get away
+ * without ifdefs we let the compiler do it by a type cast.
+ */
+#define INDEX_BASE CKSEG0
+
+#define cache_op(op,addr) \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noreorder \n" \
+ " .set mips3\n\t \n" \
+ " cache %0, %1 \n" \
+ " .set pop \n" \
+ : \
+ : "i" (op), "R" (*(unsigned char *)(addr)))
+
+#ifdef CONFIG_MIPS_MT
+/*
+ * Temporary hacks for SMTC debug. Optionally force single-threaded
+ * execution during I-cache flushes.
+ */
+
+#define PROTECT_CACHE_FLUSHES 1
+
+#ifdef PROTECT_CACHE_FLUSHES
+
+extern int mt_protiflush;
+extern int mt_protdflush;
+extern void mt_cflush_lockdown(void);
+extern void mt_cflush_release(void);
+
+#define BEGIN_MT_IPROT \
+ unsigned long flags = 0; \
+ unsigned long mtflags = 0; \
+ if(mt_protiflush) { \
+ local_irq_save(flags); \
+ ehb(); \
+ mtflags = dvpe(); \
+ mt_cflush_lockdown(); \
+ }
+
+#define END_MT_IPROT \
+ if(mt_protiflush) { \
+ mt_cflush_release(); \
+ evpe(mtflags); \
+ local_irq_restore(flags); \
+ }
+
+#define BEGIN_MT_DPROT \
+ unsigned long flags = 0; \
+ unsigned long mtflags = 0; \
+ if(mt_protdflush) { \
+ local_irq_save(flags); \
+ ehb(); \
+ mtflags = dvpe(); \
+ mt_cflush_lockdown(); \
+ }
+
+#define END_MT_DPROT \
+ if(mt_protdflush) { \
+ mt_cflush_release(); \
+ evpe(mtflags); \
+ local_irq_restore(flags); \
+ }
+
+#else
+
+#define BEGIN_MT_IPROT
+#define BEGIN_MT_DPROT
+#define END_MT_IPROT
+#define END_MT_DPROT
+
+#endif /* PROTECT_CACHE_FLUSHES */
+
+#define __iflush_prologue \
+ unsigned long redundance; \
+ extern int mt_n_iflushes; \
+ BEGIN_MT_IPROT \
+ for (redundance = 0; redundance < mt_n_iflushes; redundance++) {
+
+#define __iflush_epilogue \
+ END_MT_IPROT \
+ }
+
+#define __dflush_prologue \
+ unsigned long redundance; \
+ extern int mt_n_dflushes; \
+ BEGIN_MT_DPROT \
+ for (redundance = 0; redundance < mt_n_dflushes; redundance++) {
+
+#define __dflush_epilogue \
+ END_MT_DPROT \
+ }
+
+#define __inv_dflush_prologue __dflush_prologue
+#define __inv_dflush_epilogue __dflush_epilogue
+#define __sflush_prologue {
+#define __sflush_epilogue }
+#define __inv_sflush_prologue __sflush_prologue
+#define __inv_sflush_epilogue __sflush_epilogue
+
+#else /* CONFIG_MIPS_MT */
+
+#define __iflush_prologue {
+#define __iflush_epilogue }
+#define __dflush_prologue {
+#define __dflush_epilogue }
+#define __inv_dflush_prologue {
+#define __inv_dflush_epilogue }
+#define __sflush_prologue {
+#define __sflush_epilogue }
+#define __inv_sflush_prologue {
+#define __inv_sflush_epilogue }
+
+#endif /* CONFIG_MIPS_MT */
+
+static inline void flush_icache_line_indexed(unsigned long addr)
+{
+ __iflush_prologue
+ cache_op(Index_Invalidate_I, addr);
+ __iflush_epilogue
+}
+
+static inline void flush_dcache_line_indexed(unsigned long addr)
+{
+ __dflush_prologue
+ cache_op(Index_Writeback_Inv_D, addr);
+ __dflush_epilogue
+}
+
+static inline void flush_scache_line_indexed(unsigned long addr)
+{
+ cache_op(Index_Writeback_Inv_SD, addr);
+}
+
+static inline void flush_icache_line(unsigned long addr)
+{
+ __iflush_prologue
+ cache_op(Hit_Invalidate_I, addr);
+ __iflush_epilogue
+}
+
+static inline void flush_dcache_line(unsigned long addr)
+{
+ __dflush_prologue
+ cache_op(Hit_Writeback_Inv_D, addr);
+ __dflush_epilogue
+}
+
+static inline void invalidate_dcache_line(unsigned long addr)
+{
+ __dflush_prologue
+ cache_op(Hit_Invalidate_D, addr);
+ __dflush_epilogue
+}
+
+static inline void invalidate_scache_line(unsigned long addr)
+{
+ cache_op(Hit_Invalidate_SD, addr);
+}
+
+static inline void flush_scache_line(unsigned long addr)
+{
+ cache_op(Hit_Writeback_Inv_SD, addr);
+}
+
+#define protected_cache_op(op,addr) \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noreorder \n" \
+ " .set mips3 \n" \
+ "1: cache %0, (%1) \n" \
+ "2: .set pop \n" \
+ " .section __ex_table,\"a\" \n" \
+ " "STR(PTR)" 1b, 2b \n" \
+ " .previous" \
+ : \
+ : "i" (op), "r" (addr))
+
+/*
+ * The next two are for badland addresses like signal trampolines.
+ */
+static inline void protected_flush_icache_line(unsigned long addr)
+{
+ protected_cache_op(Hit_Invalidate_I, addr);
+}
+
+/*
+ * R10000 / R12000 hazard - these processors don't support the Hit_Writeback_D
+ * cacheop so we use Hit_Writeback_Inv_D which is supported by all R4000-style
+ * caches. We're talking about one cacheline unnecessarily getting invalidated
+ * here so the penalty isn't overly hard.
+ */
+static inline void protected_writeback_dcache_line(unsigned long addr)
+{
+ protected_cache_op(Hit_Writeback_Inv_D, addr);
+}
+
+static inline void protected_writeback_scache_line(unsigned long addr)
+{
+ protected_cache_op(Hit_Writeback_Inv_SD, addr);
+}
+
+/*
+ * This one is RM7000-specific
+ */
+static inline void invalidate_tcache_page(unsigned long addr)
+{
+ cache_op(Page_Invalidate_T, addr);
+}
+
+#define cache16_unroll32(base,op) \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noreorder \n" \
+ " .set mips3 \n" \
+ " cache %1, 0x000(%0); cache %1, 0x010(%0) \n" \
+ " cache %1, 0x020(%0); cache %1, 0x030(%0) \n" \
+ " cache %1, 0x040(%0); cache %1, 0x050(%0) \n" \
+ " cache %1, 0x060(%0); cache %1, 0x070(%0) \n" \
+ " cache %1, 0x080(%0); cache %1, 0x090(%0) \n" \
+ " cache %1, 0x0a0(%0); cache %1, 0x0b0(%0) \n" \
+ " cache %1, 0x0c0(%0); cache %1, 0x0d0(%0) \n" \
+ " cache %1, 0x0e0(%0); cache %1, 0x0f0(%0) \n" \
+ " cache %1, 0x100(%0); cache %1, 0x110(%0) \n" \
+ " cache %1, 0x120(%0); cache %1, 0x130(%0) \n" \
+ " cache %1, 0x140(%0); cache %1, 0x150(%0) \n" \
+ " cache %1, 0x160(%0); cache %1, 0x170(%0) \n" \
+ " cache %1, 0x180(%0); cache %1, 0x190(%0) \n" \
+ " cache %1, 0x1a0(%0); cache %1, 0x1b0(%0) \n" \
+ " cache %1, 0x1c0(%0); cache %1, 0x1d0(%0) \n" \
+ " cache %1, 0x1e0(%0); cache %1, 0x1f0(%0) \n" \
+ " .set pop \n" \
+ : \
+ : "r" (base), \
+ "i" (op));
+
+#define cache32_unroll32(base,op) \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noreorder \n" \
+ " .set mips3 \n" \
+ " cache %1, 0x000(%0); cache %1, 0x020(%0) \n" \
+ " cache %1, 0x040(%0); cache %1, 0x060(%0) \n" \
+ " cache %1, 0x080(%0); cache %1, 0x0a0(%0) \n" \
+ " cache %1, 0x0c0(%0); cache %1, 0x0e0(%0) \n" \
+ " cache %1, 0x100(%0); cache %1, 0x120(%0) \n" \
+ " cache %1, 0x140(%0); cache %1, 0x160(%0) \n" \
+ " cache %1, 0x180(%0); cache %1, 0x1a0(%0) \n" \
+ " cache %1, 0x1c0(%0); cache %1, 0x1e0(%0) \n" \
+ " cache %1, 0x200(%0); cache %1, 0x220(%0) \n" \
+ " cache %1, 0x240(%0); cache %1, 0x260(%0) \n" \
+ " cache %1, 0x280(%0); cache %1, 0x2a0(%0) \n" \
+ " cache %1, 0x2c0(%0); cache %1, 0x2e0(%0) \n" \
+ " cache %1, 0x300(%0); cache %1, 0x320(%0) \n" \
+ " cache %1, 0x340(%0); cache %1, 0x360(%0) \n" \
+ " cache %1, 0x380(%0); cache %1, 0x3a0(%0) \n" \
+ " cache %1, 0x3c0(%0); cache %1, 0x3e0(%0) \n" \
+ " .set pop \n" \
+ : \
+ : "r" (base), \
+ "i" (op));
+
+#define cache64_unroll32(base,op) \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noreorder \n" \
+ " .set mips3 \n" \
+ " cache %1, 0x000(%0); cache %1, 0x040(%0) \n" \
+ " cache %1, 0x080(%0); cache %1, 0x0c0(%0) \n" \
+ " cache %1, 0x100(%0); cache %1, 0x140(%0) \n" \
+ " cache %1, 0x180(%0); cache %1, 0x1c0(%0) \n" \
+ " cache %1, 0x200(%0); cache %1, 0x240(%0) \n" \
+ " cache %1, 0x280(%0); cache %1, 0x2c0(%0) \n" \
+ " cache %1, 0x300(%0); cache %1, 0x340(%0) \n" \
+ " cache %1, 0x380(%0); cache %1, 0x3c0(%0) \n" \
+ " cache %1, 0x400(%0); cache %1, 0x440(%0) \n" \
+ " cache %1, 0x480(%0); cache %1, 0x4c0(%0) \n" \
+ " cache %1, 0x500(%0); cache %1, 0x540(%0) \n" \
+ " cache %1, 0x580(%0); cache %1, 0x5c0(%0) \n" \
+ " cache %1, 0x600(%0); cache %1, 0x640(%0) \n" \
+ " cache %1, 0x680(%0); cache %1, 0x6c0(%0) \n" \
+ " cache %1, 0x700(%0); cache %1, 0x740(%0) \n" \
+ " cache %1, 0x780(%0); cache %1, 0x7c0(%0) \n" \
+ " .set pop \n" \
+ : \
+ : "r" (base), \
+ "i" (op));
+
+#define cache128_unroll32(base,op) \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noreorder \n" \
+ " .set mips3 \n" \
+ " cache %1, 0x000(%0); cache %1, 0x080(%0) \n" \
+ " cache %1, 0x100(%0); cache %1, 0x180(%0) \n" \
+ " cache %1, 0x200(%0); cache %1, 0x280(%0) \n" \
+ " cache %1, 0x300(%0); cache %1, 0x380(%0) \n" \
+ " cache %1, 0x400(%0); cache %1, 0x480(%0) \n" \
+ " cache %1, 0x500(%0); cache %1, 0x580(%0) \n" \
+ " cache %1, 0x600(%0); cache %1, 0x680(%0) \n" \
+ " cache %1, 0x700(%0); cache %1, 0x780(%0) \n" \
+ " cache %1, 0x800(%0); cache %1, 0x880(%0) \n" \
+ " cache %1, 0x900(%0); cache %1, 0x980(%0) \n" \
+ " cache %1, 0xa00(%0); cache %1, 0xa80(%0) \n" \
+ " cache %1, 0xb00(%0); cache %1, 0xb80(%0) \n" \
+ " cache %1, 0xc00(%0); cache %1, 0xc80(%0) \n" \
+ " cache %1, 0xd00(%0); cache %1, 0xd80(%0) \n" \
+ " cache %1, 0xe00(%0); cache %1, 0xe80(%0) \n" \
+ " cache %1, 0xf00(%0); cache %1, 0xf80(%0) \n" \
+ " .set pop \n" \
+ : \
+ : "r" (base), \
+ "i" (op));
+
+/* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */
+#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize) \
+static inline void blast_##pfx##cache##lsize(void) \
+{ \
+ unsigned long start = INDEX_BASE; \
+ unsigned long end = start + current_cpu_data.desc.waysize; \
+ unsigned long ws_inc = 1UL << current_cpu_data.desc.waybit; \
+ unsigned long ws_end = current_cpu_data.desc.ways << \
+ current_cpu_data.desc.waybit; \
+ unsigned long ws, addr; \
+ \
+ __##pfx##flush_prologue \
+ \
+ for (ws = 0; ws < ws_end; ws += ws_inc) \
+ for (addr = start; addr < end; addr += lsize * 32) \
+ cache##lsize##_unroll32(addr|ws, indexop); \
+ \
+ __##pfx##flush_epilogue \
+} \
+ \
+static inline void blast_##pfx##cache##lsize##_page(unsigned long page) \
+{ \
+ unsigned long start = page; \
+ unsigned long end = page + PAGE_SIZE; \
+ \
+ __##pfx##flush_prologue \
+ \
+ do { \
+ cache##lsize##_unroll32(start, hitop); \
+ start += lsize * 32; \
+ } while (start < end); \
+ \
+ __##pfx##flush_epilogue \
+} \
+ \
+static inline void blast_##pfx##cache##lsize##_page_indexed(unsigned long page) \
+{ \
+ unsigned long indexmask = current_cpu_data.desc.waysize - 1; \
+ unsigned long start = INDEX_BASE + (page & indexmask); \
+ unsigned long end = start + PAGE_SIZE; \
+ unsigned long ws_inc = 1UL << current_cpu_data.desc.waybit; \
+ unsigned long ws_end = current_cpu_data.desc.ways << \
+ current_cpu_data.desc.waybit; \
+ unsigned long ws, addr; \
+ \
+ __##pfx##flush_prologue \
+ \
+ for (ws = 0; ws < ws_end; ws += ws_inc) \
+ for (addr = start; addr < end; addr += lsize * 32) \
+ cache##lsize##_unroll32(addr|ws, indexop); \
+ \
+ __##pfx##flush_epilogue \
+}
+
+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16)
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16)
+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32)
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32)
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128)
+
+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16)
+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32)
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16)
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32)
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64)
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128)
+
+/* build blast_xxx_range, protected_blast_xxx_range */
+#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \
+static inline void prot##blast_##pfx##cache##_range(unsigned long start, \
+ unsigned long end) \
+{ \
+ unsigned long lsize = cpu_##desc##_line_size(); \
+ unsigned long addr = start & ~(lsize - 1); \
+ unsigned long aend = (end - 1) & ~(lsize - 1); \
+ \
+ __##pfx##flush_prologue \
+ \
+ while (1) { \
+ prot##cache_op(hitop, addr); \
+ if (addr == aend) \
+ break; \
+ addr += lsize; \
+ } \
+ \
+ __##pfx##flush_epilogue \
+}
+
+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_)
+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_)
+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_)
+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, )
+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, )
+/* blast_inv_dcache_range */
+__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, )
+__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, )
+
+#endif /* _ASM_R4KCACHE_H */
diff --git a/arch/mips/include/asm/reboot.h b/arch/mips/include/asm/reboot.h
new file mode 100644
index 00000000000..e48c0bfab25
--- /dev/null
+++ b/arch/mips/include/asm/reboot.h
@@ -0,0 +1,15 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997, 1999, 2001, 06 by Ralf Baechle
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_REBOOT_H
+#define _ASM_REBOOT_H
+
+extern void (*_machine_restart)(char *command);
+extern void (*_machine_halt)(void);
+
+#endif /* _ASM_REBOOT_H */
diff --git a/arch/mips/include/asm/reg.h b/arch/mips/include/asm/reg.h
new file mode 100644
index 00000000000..634b55d7e7f
--- /dev/null
+++ b/arch/mips/include/asm/reg.h
@@ -0,0 +1,128 @@
+/*
+ * Various register offset definitions for debuggers, core file
+ * examiners and whatnot.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1999 Ralf Baechle
+ * Copyright (C) 1995, 1999 Silicon Graphics
+ */
+#ifndef __ASM_MIPS_REG_H
+#define __ASM_MIPS_REG_H
+
+
+#if defined(CONFIG_32BIT) || defined(WANT_COMPAT_REG_H)
+
+#define EF_R0 6
+#define EF_R1 7
+#define EF_R2 8
+#define EF_R3 9
+#define EF_R4 10
+#define EF_R5 11
+#define EF_R6 12
+#define EF_R7 13
+#define EF_R8 14
+#define EF_R9 15
+#define EF_R10 16
+#define EF_R11 17
+#define EF_R12 18
+#define EF_R13 19
+#define EF_R14 20
+#define EF_R15 21
+#define EF_R16 22
+#define EF_R17 23
+#define EF_R18 24
+#define EF_R19 25
+#define EF_R20 26
+#define EF_R21 27
+#define EF_R22 28
+#define EF_R23 29
+#define EF_R24 30
+#define EF_R25 31
+
+/*
+ * k0/k1 unsaved
+ */
+#define EF_R26 32
+#define EF_R27 33
+
+#define EF_R28 34
+#define EF_R29 35
+#define EF_R30 36
+#define EF_R31 37
+
+/*
+ * Saved special registers
+ */
+#define EF_LO 38
+#define EF_HI 39
+
+#define EF_CP0_EPC 40
+#define EF_CP0_BADVADDR 41
+#define EF_CP0_STATUS 42
+#define EF_CP0_CAUSE 43
+#define EF_UNUSED0 44
+
+#define EF_SIZE 180
+
+#endif
+
+#ifdef CONFIG_64BIT
+
+#define EF_R0 0
+#define EF_R1 1
+#define EF_R2 2
+#define EF_R3 3
+#define EF_R4 4
+#define EF_R5 5
+#define EF_R6 6
+#define EF_R7 7
+#define EF_R8 8
+#define EF_R9 9
+#define EF_R10 10
+#define EF_R11 11
+#define EF_R12 12
+#define EF_R13 13
+#define EF_R14 14
+#define EF_R15 15
+#define EF_R16 16
+#define EF_R17 17
+#define EF_R18 18
+#define EF_R19 19
+#define EF_R20 20
+#define EF_R21 21
+#define EF_R22 22
+#define EF_R23 23
+#define EF_R24 24
+#define EF_R25 25
+
+/*
+ * k0/k1 unsaved
+ */
+#define EF_R26 26
+#define EF_R27 27
+
+
+#define EF_R28 28
+#define EF_R29 29
+#define EF_R30 30
+#define EF_R31 31
+
+/*
+ * Saved special registers
+ */
+#define EF_LO 32
+#define EF_HI 33
+
+#define EF_CP0_EPC 34
+#define EF_CP0_BADVADDR 35
+#define EF_CP0_STATUS 36
+#define EF_CP0_CAUSE 37
+
+#define EF_SIZE 304 /* size in bytes */
+
+#endif /* CONFIG_64BIT */
+
+#endif /* __ASM_MIPS_REG_H */
diff --git a/arch/mips/include/asm/regdef.h b/arch/mips/include/asm/regdef.h
new file mode 100644
index 00000000000..7c8ecb6b9c4
--- /dev/null
+++ b/arch/mips/include/asm/regdef.h
@@ -0,0 +1,100 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1985 MIPS Computer Systems, Inc.
+ * Copyright (C) 1994, 95, 99, 2003 by Ralf Baechle
+ * Copyright (C) 1990 - 1992, 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_REGDEF_H
+#define _ASM_REGDEF_H
+
+#include <asm/sgidefs.h>
+
+#if _MIPS_SIM == _MIPS_SIM_ABI32
+
+/*
+ * Symbolic register names for 32 bit ABI
+ */
+#define zero $0 /* wired zero */
+#define AT $1 /* assembler temp - uppercase because of ".set at" */
+#define v0 $2 /* return value */
+#define v1 $3
+#define a0 $4 /* argument registers */
+#define a1 $5
+#define a2 $6
+#define a3 $7
+#define t0 $8 /* caller saved */
+#define t1 $9
+#define t2 $10
+#define t3 $11
+#define t4 $12
+#define t5 $13
+#define t6 $14
+#define t7 $15
+#define s0 $16 /* callee saved */
+#define s1 $17
+#define s2 $18
+#define s3 $19
+#define s4 $20
+#define s5 $21
+#define s6 $22
+#define s7 $23
+#define t8 $24 /* caller saved */
+#define t9 $25
+#define jp $25 /* PIC jump register */
+#define k0 $26 /* kernel scratch */
+#define k1 $27
+#define gp $28 /* global pointer */
+#define sp $29 /* stack pointer */
+#define fp $30 /* frame pointer */
+#define s8 $30 /* same like fp! */
+#define ra $31 /* return address */
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
+
+#if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32
+
+#define zero $0 /* wired zero */
+#define AT $at /* assembler temp - uppercase because of ".set at" */
+#define v0 $2 /* return value - caller saved */
+#define v1 $3
+#define a0 $4 /* argument registers */
+#define a1 $5
+#define a2 $6
+#define a3 $7
+#define a4 $8 /* arg reg 64 bit; caller saved in 32 bit */
+#define ta0 $8
+#define a5 $9
+#define ta1 $9
+#define a6 $10
+#define ta2 $10
+#define a7 $11
+#define ta3 $11
+#define t0 $12 /* caller saved */
+#define t1 $13
+#define t2 $14
+#define t3 $15
+#define s0 $16 /* callee saved */
+#define s1 $17
+#define s2 $18
+#define s3 $19
+#define s4 $20
+#define s5 $21
+#define s6 $22
+#define s7 $23
+#define t8 $24 /* caller saved */
+#define t9 $25 /* callee address for PIC/temp */
+#define jp $25 /* PIC jump register */
+#define k0 $26 /* kernel temporary */
+#define k1 $27
+#define gp $28 /* global pointer - caller saved for PIC */
+#define sp $29 /* stack pointer */
+#define fp $30 /* frame pointer */
+#define s8 $30 /* callee saved */
+#define ra $31 /* return address */
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 */
+
+#endif /* _ASM_REGDEF_H */
diff --git a/arch/mips/include/asm/resource.h b/arch/mips/include/asm/resource.h
new file mode 100644
index 00000000000..87cb3085269
--- /dev/null
+++ b/arch/mips/include/asm/resource.h
@@ -0,0 +1,35 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 96, 98, 99, 2000 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_RESOURCE_H
+#define _ASM_RESOURCE_H
+
+
+/*
+ * These five resource limit IDs have a MIPS/Linux-specific ordering,
+ * the rest comes from the generic header:
+ */
+#define RLIMIT_NOFILE 5 /* max number of open files */
+#define RLIMIT_AS 6 /* address space limit */
+#define RLIMIT_RSS 7 /* max resident set size */
+#define RLIMIT_NPROC 8 /* max number of processes */
+#define RLIMIT_MEMLOCK 9 /* max locked-in-memory address space */
+
+/*
+ * SuS says limits have to be unsigned.
+ * Which makes a ton more sense anyway,
+ * but we keep the old value on MIPS32,
+ * for compatibility:
+ */
+#ifdef CONFIG_32BIT
+# define RLIM_INFINITY 0x7fffffffUL
+#endif
+
+#include <asm-generic/resource.h>
+
+#endif /* _ASM_RESOURCE_H */
diff --git a/arch/mips/include/asm/rm9k-ocd.h b/arch/mips/include/asm/rm9k-ocd.h
new file mode 100644
index 00000000000..b0b80d9ecf9
--- /dev/null
+++ b/arch/mips/include/asm/rm9k-ocd.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2004 by Basler Vision Technologies AG
+ * Author: Thomas Koeller <thomas.koeller@baslerweb.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#if !defined(_ASM_RM9K_OCD_H)
+#define _ASM_RM9K_OCD_H
+
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+
+extern volatile void __iomem * const ocd_base;
+extern volatile void __iomem * const titan_base;
+
+#define ocd_addr(__x__) (ocd_base + (__x__))
+#define titan_addr(__x__) (titan_base + (__x__))
+#define scram_addr(__x__) (scram_base + (__x__))
+
+/* OCD register access */
+#define ocd_readl(__offs__) __raw_readl(ocd_addr(__offs__))
+#define ocd_readw(__offs__) __raw_readw(ocd_addr(__offs__))
+#define ocd_readb(__offs__) __raw_readb(ocd_addr(__offs__))
+#define ocd_writel(__val__, __offs__) \
+ __raw_writel((__val__), ocd_addr(__offs__))
+#define ocd_writew(__val__, __offs__) \
+ __raw_writew((__val__), ocd_addr(__offs__))
+#define ocd_writeb(__val__, __offs__) \
+ __raw_writeb((__val__), ocd_addr(__offs__))
+
+/* TITAN register access - 32 bit-wide only */
+#define titan_readl(__offs__) __raw_readl(titan_addr(__offs__))
+#define titan_writel(__val__, __offs__) \
+ __raw_writel((__val__), titan_addr(__offs__))
+
+/* Protect access to shared TITAN registers */
+extern spinlock_t titan_lock;
+extern int titan_irqflags;
+#define lock_titan_regs() spin_lock_irqsave(&titan_lock, titan_irqflags)
+#define unlock_titan_regs() spin_unlock_irqrestore(&titan_lock, titan_irqflags)
+
+#endif /* !defined(_ASM_RM9K_OCD_H) */
diff --git a/arch/mips/include/asm/rtlx.h b/arch/mips/include/asm/rtlx.h
new file mode 100644
index 00000000000..4ca3063ed2c
--- /dev/null
+++ b/arch/mips/include/asm/rtlx.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
+ *
+ */
+
+#ifndef __ASM_RTLX_H_
+#define __ASM_RTLX_H_
+
+#include <irq.h>
+
+#define LX_NODE_BASE 10
+
+#define MIPS_CPU_RTLX_IRQ 0
+
+#define RTLX_VERSION 2
+#define RTLX_xID 0x12345600
+#define RTLX_ID (RTLX_xID | RTLX_VERSION)
+#define RTLX_CHANNELS 8
+
+#define RTLX_CHANNEL_STDIO 0
+#define RTLX_CHANNEL_DBG 1
+#define RTLX_CHANNEL_SYSIO 2
+
+extern int rtlx_open(int index, int can_sleep);
+extern int rtlx_release(int index);
+extern ssize_t rtlx_read(int index, void __user *buff, size_t count);
+extern ssize_t rtlx_write(int index, const void __user *buffer, size_t count);
+extern unsigned int rtlx_read_poll(int index, int can_sleep);
+extern unsigned int rtlx_write_poll(int index);
+
+enum rtlx_state {
+ RTLX_STATE_UNUSED = 0,
+ RTLX_STATE_INITIALISED,
+ RTLX_STATE_REMOTE_READY,
+ RTLX_STATE_OPENED
+};
+
+#define RTLX_BUFFER_SIZE 2048
+
+/* each channel supports read and write.
+ linux (vpe0) reads lx_buffer and writes rt_buffer
+ SP (vpe1) reads rt_buffer and writes lx_buffer
+*/
+struct rtlx_channel {
+ enum rtlx_state rt_state;
+ enum rtlx_state lx_state;
+
+ int buffer_size;
+
+ /* read and write indexes per buffer */
+ int rt_write, rt_read;
+ char *rt_buffer;
+
+ int lx_write, lx_read;
+ char *lx_buffer;
+};
+
+struct rtlx_info {
+ unsigned long id;
+ enum rtlx_state state;
+
+ struct rtlx_channel channel[RTLX_CHANNELS];
+};
+
+#endif /* __ASM_RTLX_H_ */
diff --git a/arch/mips/include/asm/scatterlist.h b/arch/mips/include/asm/scatterlist.h
new file mode 100644
index 00000000000..83d69fe17c9
--- /dev/null
+++ b/arch/mips/include/asm/scatterlist.h
@@ -0,0 +1,28 @@
+#ifndef __ASM_SCATTERLIST_H
+#define __ASM_SCATTERLIST_H
+
+#include <asm/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+ unsigned long sg_magic;
+#endif
+ unsigned long page_link;
+ unsigned int offset;
+ dma_addr_t dma_address;
+ unsigned int length;
+};
+
+/*
+ * These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
+ */
+#define sg_dma_address(sg) ((sg)->dma_address)
+#define sg_dma_len(sg) ((sg)->length)
+
+#define ISA_DMA_THRESHOLD (0x00ffffffUL)
+
+#endif /* __ASM_SCATTERLIST_H */
diff --git a/arch/mips/include/asm/seccomp.h b/arch/mips/include/asm/seccomp.h
new file mode 100644
index 00000000000..36ed4407025
--- /dev/null
+++ b/arch/mips/include/asm/seccomp.h
@@ -0,0 +1,37 @@
+#ifndef __ASM_SECCOMP_H
+
+#include <linux/thread_info.h>
+#include <linux/unistd.h>
+
+#define __NR_seccomp_read __NR_read
+#define __NR_seccomp_write __NR_write
+#define __NR_seccomp_exit __NR_exit
+#define __NR_seccomp_sigreturn __NR_rt_sigreturn
+
+/*
+ * Kludge alert:
+ *
+ * The generic seccomp code currently allows only a single compat ABI. Until
+ * this is fixed we priorize O32 as the compat ABI over N32.
+ */
+#ifdef CONFIG_MIPS32_O32
+
+#define TIF_32BIT TIF_32BIT_REGS
+
+#define __NR_seccomp_read_32 4003
+#define __NR_seccomp_write_32 4004
+#define __NR_seccomp_exit_32 4001
+#define __NR_seccomp_sigreturn_32 4193 /* rt_sigreturn */
+
+#elif defined(CONFIG_MIPS32_N32)
+
+#define TIF_32BIT _TIF_32BIT_ADDR
+
+#define __NR_seccomp_read_32 6000
+#define __NR_seccomp_write_32 6001
+#define __NR_seccomp_exit_32 6058
+#define __NR_seccomp_sigreturn_32 6211 /* rt_sigreturn */
+
+#endif /* CONFIG_MIPS32_O32 */
+
+#endif /* __ASM_SECCOMP_H */
diff --git a/arch/mips/include/asm/sections.h b/arch/mips/include/asm/sections.h
new file mode 100644
index 00000000000..b7e37262c24
--- /dev/null
+++ b/arch/mips/include/asm/sections.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SECTIONS_H
+#define _ASM_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+#endif /* _ASM_SECTIONS_H */
diff --git a/arch/mips/include/asm/segment.h b/arch/mips/include/asm/segment.h
new file mode 100644
index 00000000000..92ac001fc48
--- /dev/null
+++ b/arch/mips/include/asm/segment.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SEGMENT_H
+#define _ASM_SEGMENT_H
+
+/* Only here because we have some old header files that expect it.. */
+
+#endif /* _ASM_SEGMENT_H */
diff --git a/arch/mips/include/asm/sembuf.h b/arch/mips/include/asm/sembuf.h
new file mode 100644
index 00000000000..7281a4decaa
--- /dev/null
+++ b/arch/mips/include/asm/sembuf.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_SEMBUF_H
+#define _ASM_SEMBUF_H
+
+/*
+ * The semid64_ds structure for the MIPS architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct semid64_ds {
+ struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
+ __kernel_time_t sem_otime; /* last semop time */
+ __kernel_time_t sem_ctime; /* last change time */
+ unsigned long sem_nsems; /* no. of semaphores in array */
+ unsigned long __unused1;
+ unsigned long __unused2;
+};
+
+#endif /* _ASM_SEMBUF_H */
diff --git a/arch/mips/include/asm/serial.h b/arch/mips/include/asm/serial.h
new file mode 100644
index 00000000000..c07ebd8eb9e
--- /dev/null
+++ b/arch/mips/include/asm/serial.h
@@ -0,0 +1,22 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SERIAL_H
+#define _ASM_SERIAL_H
+
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD (1843200 / 16)
+
+#endif /* _ASM_SERIAL_H */
diff --git a/arch/mips/include/asm/setup.h b/arch/mips/include/asm/setup.h
new file mode 100644
index 00000000000..e600cedda97
--- /dev/null
+++ b/arch/mips/include/asm/setup.h
@@ -0,0 +1,10 @@
+#ifndef _MIPS_SETUP_H
+#define _MIPS_SETUP_H
+
+#define COMMAND_LINE_SIZE 256
+
+#ifdef __KERNEL__
+extern void setup_early_printk(void);
+#endif /* __KERNEL__ */
+
+#endif /* __SETUP_H */
diff --git a/arch/mips/include/asm/sgi/gio.h b/arch/mips/include/asm/sgi/gio.h
new file mode 100644
index 00000000000..889cf028c95
--- /dev/null
+++ b/arch/mips/include/asm/sgi/gio.h
@@ -0,0 +1,86 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * gio.h: Definitions for SGI GIO bus
+ *
+ * Copyright (C) 2002 Ladislav Michl
+ */
+
+#ifndef _SGI_GIO_H
+#define _SGI_GIO_H
+
+/*
+ * GIO bus addresses
+ *
+ * The Indigo and Indy have two GIO bus connectors. Indigo2 (all models) have
+ * three physical connectors, but only two slots, GFX and EXP0.
+ *
+ * There is 10MB of GIO address space for GIO64 slot devices
+ * slot# slot type address range size
+ * ----- --------- ----------------------- -----
+ * 0 GFX 0x1f000000 - 0x1f3fffff 4MB
+ * 1 EXP0 0x1f400000 - 0x1f5fffff 2MB
+ * 2 EXP1 0x1f600000 - 0x1f9fffff 4MB
+ *
+ * There are un-slotted devices, HPC, I/O and misc devices, which are grouped
+ * into the HPC address space.
+ * - MISC 0x1fb00000 - 0x1fbfffff 1MB
+ *
+ * Following space is reserved and unused
+ * - RESERVED 0x18000000 - 0x1effffff 112MB
+ *
+ * GIO bus IDs
+ *
+ * Each GIO bus device identifies itself to the system by answering a
+ * read with an "ID" value. IDs are either 8 or 32 bits long. IDs less
+ * than 128 are 8 bits long, with the most significant 24 bits read from
+ * the slot undefined.
+ *
+ * 32-bit IDs are divided into
+ * bits 0:6 the product ID; ranges from 0x00 to 0x7F.
+ * bit 7 0=GIO Product ID is 8 bits wide
+ * 1=GIO Product ID is 32 bits wide.
+ * bits 8:15 manufacturer version for the product.
+ * bit 16 0=GIO32 and GIO32-bis, 1=GIO64.
+ * bit 17 0=no ROM present
+ * 1=ROM present on this board AND next three words
+ * space define the ROM.
+ * bits 18:31 up to manufacturer.
+ *
+ * IDs above 0x50/0xd0 are of 3rd party boards.
+ *
+ * 8-bit IDs
+ * 0x01 XPI low cost FDDI
+ * 0x02 GTR TokenRing
+ * 0x04 Synchronous ISDN
+ * 0x05 ATM board [*]
+ * 0x06 Canon Interface
+ * 0x07 16 bit SCSI Card [*]
+ * 0x08 JPEG (Double Wide)
+ * 0x09 JPEG (Single Wide)
+ * 0x0a XPI mez. FDDI device 0
+ * 0x0b XPI mez. FDDI device 1
+ * 0x0c SMPTE 259M Video [*]
+ * 0x0d Babblefish Compression [*]
+ * 0x0e E-Plex 8-port Ethernet
+ * 0x30 Lyon Lamb IVAS
+ * 0xb8 GIO 100BaseTX Fast Ethernet (gfe)
+ *
+ * [*] Device provide 32-bit ID.
+ *
+ */
+
+#define GIO_ID(x) (x & 0x7f)
+#define GIO_32BIT_ID 0x80
+#define GIO_REV(x) ((x >> 8) & 0xff)
+#define GIO_64BIT_IFACE 0x10000
+#define GIO_ROM_PRESENT 0x20000
+#define GIO_VENDOR_CODE(x) ((x >> 18) & 0x3fff)
+
+#define GIO_SLOT_GFX_BASE 0x1f000000
+#define GIO_SLOT_EXP0_BASE 0x1f400000
+#define GIO_SLOT_EXP1_BASE 0x1f600000
+
+#endif /* _SGI_GIO_H */
diff --git a/arch/mips/include/asm/sgi/hpc3.h b/arch/mips/include/asm/sgi/hpc3.h
new file mode 100644
index 00000000000..c4729f53191
--- /dev/null
+++ b/arch/mips/include/asm/sgi/hpc3.h
@@ -0,0 +1,317 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * hpc3.h: Definitions for SGI HPC3 controller
+ *
+ * Copyright (C) 1996 David S. Miller
+ * Copyright (C) 1998 Ralf Baechle
+ */
+
+#ifndef _SGI_HPC3_H
+#define _SGI_HPC3_H
+
+#include <linux/types.h>
+#include <asm/page.h>
+
+/* An HPC DMA descriptor. */
+struct hpc_dma_desc {
+ u32 pbuf; /* physical address of data buffer */
+ u32 cntinfo; /* counter and info bits */
+#define HPCDMA_EOX 0x80000000 /* last desc in chain for tx */
+#define HPCDMA_EOR 0x80000000 /* last desc in chain for rx */
+#define HPCDMA_EOXP 0x40000000 /* end of packet for tx */
+#define HPCDMA_EORP 0x40000000 /* end of packet for rx */
+#define HPCDMA_XIE 0x20000000 /* irq generated when at end of this desc */
+#define HPCDMA_XIU 0x01000000 /* Tx buffer in use by CPU. */
+#define HPCDMA_EIPC 0x00ff0000 /* SEEQ ethernet special xternal bytecount */
+#define HPCDMA_ETXD 0x00008000 /* set to one by HPC when packet tx'd */
+#define HPCDMA_OWN 0x00004000 /* Denotes ring buffer ownership on rx */
+#define HPCDMA_BCNT 0x00003fff /* size in bytes of this dma buffer */
+
+ u32 pnext; /* paddr of next hpc_dma_desc if any */
+};
+
+/* The set of regs for each HPC3 PBUS DMA channel. */
+struct hpc3_pbus_dmacregs {
+ volatile u32 pbdma_bptr; /* pbus dma channel buffer ptr */
+ volatile u32 pbdma_dptr; /* pbus dma channel desc ptr */
+ u32 _unused0[0x1000/4 - 2]; /* padding */
+ volatile u32 pbdma_ctrl; /* pbus dma channel control register has
+ * copletely different meaning for read
+ * compared with write */
+ /* read */
+#define HPC3_PDMACTRL_INT 0x00000001 /* interrupt (cleared after read) */
+#define HPC3_PDMACTRL_ISACT 0x00000002 /* channel active */
+ /* write */
+#define HPC3_PDMACTRL_SEL 0x00000002 /* little endian transfer */
+#define HPC3_PDMACTRL_RCV 0x00000004 /* direction is receive */
+#define HPC3_PDMACTRL_FLSH 0x00000008 /* enable flush for receive DMA */
+#define HPC3_PDMACTRL_ACT 0x00000010 /* start dma transfer */
+#define HPC3_PDMACTRL_LD 0x00000020 /* load enable for ACT */
+#define HPC3_PDMACTRL_RT 0x00000040 /* Use realtime GIO bus servicing */
+#define HPC3_PDMACTRL_HW 0x0000ff00 /* DMA High-water mark */
+#define HPC3_PDMACTRL_FB 0x003f0000 /* Ptr to beginning of fifo */
+#define HPC3_PDMACTRL_FE 0x3f000000 /* Ptr to end of fifo */
+
+ u32 _unused1[0x1000/4 - 1]; /* padding */
+};
+
+/* The HPC3 SCSI registers, this does not include external ones. */
+struct hpc3_scsiregs {
+ volatile u32 cbptr; /* current dma buffer ptr, diagnostic use only */
+ volatile u32 ndptr; /* next dma descriptor ptr */
+ u32 _unused0[0x1000/4 - 2]; /* padding */
+ volatile u32 bcd; /* byte count info */
+#define HPC3_SBCD_BCNTMSK 0x00003fff /* bytes to transfer from/to memory */
+#define HPC3_SBCD_XIE 0x00004000 /* Send IRQ when done with cur buf */
+#define HPC3_SBCD_EOX 0x00008000 /* Indicates this is last buf in chain */
+
+ volatile u32 ctrl; /* control register */
+#define HPC3_SCTRL_IRQ 0x01 /* IRQ asserted, either dma done or parity */
+#define HPC3_SCTRL_ENDIAN 0x02 /* DMA endian mode, 0=big 1=little */
+#define HPC3_SCTRL_DIR 0x04 /* DMA direction, 1=dev2mem 0=mem2dev */
+#define HPC3_SCTRL_FLUSH 0x08 /* Tells HPC3 to flush scsi fifos */
+#define HPC3_SCTRL_ACTIVE 0x10 /* SCSI DMA channel is active */
+#define HPC3_SCTRL_AMASK 0x20 /* DMA active inhibits PIO */
+#define HPC3_SCTRL_CRESET 0x40 /* Resets dma channel and external controller */
+#define HPC3_SCTRL_PERR 0x80 /* Bad parity on HPC3 iface to scsi controller */
+
+ volatile u32 gfptr; /* current GIO fifo ptr */
+ volatile u32 dfptr; /* current device fifo ptr */
+ volatile u32 dconfig; /* DMA configuration register */
+#define HPC3_SDCFG_HCLK 0x00001 /* Enable DMA half clock mode */
+#define HPC3_SDCFG_D1 0x00006 /* Cycles to spend in D1 state */
+#define HPC3_SDCFG_D2 0x00038 /* Cycles to spend in D2 state */
+#define HPC3_SDCFG_D3 0x001c0 /* Cycles to spend in D3 state */
+#define HPC3_SDCFG_HWAT 0x00e00 /* DMA high water mark */
+#define HPC3_SDCFG_HW 0x01000 /* Enable 16-bit halfword DMA accesses to scsi */
+#define HPC3_SDCFG_SWAP 0x02000 /* Byte swap all DMA accesses */
+#define HPC3_SDCFG_EPAR 0x04000 /* Enable parity checking for DMA */
+#define HPC3_SDCFG_POLL 0x08000 /* hd_dreq polarity control */
+#define HPC3_SDCFG_ERLY 0x30000 /* hd_dreq behavior control bits */
+
+ volatile u32 pconfig; /* PIO configuration register */
+#define HPC3_SPCFG_P3 0x0003 /* Cycles to spend in P3 state */
+#define HPC3_SPCFG_P2W 0x001c /* Cycles to spend in P2 state for writes */
+#define HPC3_SPCFG_P2R 0x01e0 /* Cycles to spend in P2 state for reads */
+#define HPC3_SPCFG_P1 0x0e00 /* Cycles to spend in P1 state */
+#define HPC3_SPCFG_HW 0x1000 /* Enable 16-bit halfword PIO accesses to scsi */
+#define HPC3_SPCFG_SWAP 0x2000 /* Byte swap all PIO accesses */
+#define HPC3_SPCFG_EPAR 0x4000 /* Enable parity checking for PIO */
+#define HPC3_SPCFG_FUJI 0x8000 /* Fujitsu scsi controller mode for faster dma/pio */
+
+ u32 _unused1[0x1000/4 - 6]; /* padding */
+};
+
+/* SEEQ ethernet HPC3 registers, only one seeq per HPC3. */
+struct hpc3_ethregs {
+ /* Receiver registers. */
+ volatile u32 rx_cbptr; /* current dma buffer ptr, diagnostic use only */
+ volatile u32 rx_ndptr; /* next dma descriptor ptr */
+ u32 _unused0[0x1000/4 - 2]; /* padding */
+ volatile u32 rx_bcd; /* byte count info */
+#define HPC3_ERXBCD_BCNTMSK 0x00003fff /* bytes to be sent to memory */
+#define HPC3_ERXBCD_XIE 0x20000000 /* HPC3 interrupts cpu at end of this buf */
+#define HPC3_ERXBCD_EOX 0x80000000 /* flags this as end of descriptor chain */
+
+ volatile u32 rx_ctrl; /* control register */
+#define HPC3_ERXCTRL_STAT50 0x0000003f /* Receive status reg bits of Seeq8003 */
+#define HPC3_ERXCTRL_STAT6 0x00000040 /* Rdonly irq status */
+#define HPC3_ERXCTRL_STAT7 0x00000080 /* Rdonlt old/new status bit from Seeq */
+#define HPC3_ERXCTRL_ENDIAN 0x00000100 /* Endian for dma channel, little=1 big=0 */
+#define HPC3_ERXCTRL_ACTIVE 0x00000200 /* Tells if DMA transfer is in progress */
+#define HPC3_ERXCTRL_AMASK 0x00000400 /* Tells if ACTIVE inhibits PIO's to hpc3 */
+#define HPC3_ERXCTRL_RBO 0x00000800 /* Receive buffer overflow if set to 1 */
+
+ volatile u32 rx_gfptr; /* current GIO fifo ptr */
+ volatile u32 rx_dfptr; /* current device fifo ptr */
+ u32 _unused1; /* padding */
+ volatile u32 reset; /* reset register */
+#define HPC3_ERST_CRESET 0x1 /* Reset dma channel and external controller */
+#define HPC3_ERST_CLRIRQ 0x2 /* Clear channel interrupt */
+#define HPC3_ERST_LBACK 0x4 /* Enable diagnostic loopback mode of Seeq8003 */
+
+ volatile u32 dconfig; /* DMA configuration register */
+#define HPC3_EDCFG_D1 0x0000f /* Cycles to spend in D1 state for PIO */
+#define HPC3_EDCFG_D2 0x000f0 /* Cycles to spend in D2 state for PIO */
+#define HPC3_EDCFG_D3 0x00f00 /* Cycles to spend in D3 state for PIO */
+#define HPC3_EDCFG_WCTRL 0x01000 /* Enable writes of desc into ex ctrl port */
+#define HPC3_EDCFG_FRXDC 0x02000 /* Clear eop stat bits upon rxdc, hw seeq fix */
+#define HPC3_EDCFG_FEOP 0x04000 /* Bad packet marker timeout enable */
+#define HPC3_EDCFG_FIRQ 0x08000 /* Another bad packet timeout enable */
+#define HPC3_EDCFG_PTO 0x30000 /* Programmed timeout value for above two */
+
+ volatile u32 pconfig; /* PIO configuration register */
+#define HPC3_EPCFG_P1 0x000f /* Cycles to spend in P1 state for PIO */
+#define HPC3_EPCFG_P2 0x00f0 /* Cycles to spend in P2 state for PIO */
+#define HPC3_EPCFG_P3 0x0f00 /* Cycles to spend in P3 state for PIO */
+#define HPC3_EPCFG_TST 0x1000 /* Diagnistic ram test feature bit */
+
+ u32 _unused2[0x1000/4 - 8]; /* padding */
+
+ /* Transmitter registers. */
+ volatile u32 tx_cbptr; /* current dma buffer ptr, diagnostic use only */
+ volatile u32 tx_ndptr; /* next dma descriptor ptr */
+ u32 _unused3[0x1000/4 - 2]; /* padding */
+ volatile u32 tx_bcd; /* byte count info */
+#define HPC3_ETXBCD_BCNTMSK 0x00003fff /* bytes to be read from memory */
+#define HPC3_ETXBCD_ESAMP 0x10000000 /* if set, too late to add descriptor */
+#define HPC3_ETXBCD_XIE 0x20000000 /* Interrupt cpu at end of cur desc */
+#define HPC3_ETXBCD_EOP 0x40000000 /* Last byte of cur buf is end of packet */
+#define HPC3_ETXBCD_EOX 0x80000000 /* This buf is the end of desc chain */
+
+ volatile u32 tx_ctrl; /* control register */
+#define HPC3_ETXCTRL_STAT30 0x0000000f /* Rdonly copy of seeq tx stat reg */
+#define HPC3_ETXCTRL_STAT4 0x00000010 /* Indicate late collision occurred */
+#define HPC3_ETXCTRL_STAT75 0x000000e0 /* Rdonly irq status from seeq */
+#define HPC3_ETXCTRL_ENDIAN 0x00000100 /* DMA channel endian mode, 1=little 0=big */
+#define HPC3_ETXCTRL_ACTIVE 0x00000200 /* DMA tx channel is active */
+#define HPC3_ETXCTRL_AMASK 0x00000400 /* Indicates ACTIVE inhibits PIO's */
+
+ volatile u32 tx_gfptr; /* current GIO fifo ptr */
+ volatile u32 tx_dfptr; /* current device fifo ptr */
+ u32 _unused4[0x1000/4 - 4]; /* padding */
+};
+
+struct hpc3_regs {
+ /* First regs for the PBUS 8 dma channels. */
+ struct hpc3_pbus_dmacregs pbdma[8];
+
+ /* Now the HPC scsi registers, we get two scsi reg sets. */
+ struct hpc3_scsiregs scsi_chan0, scsi_chan1;
+
+ /* The SEEQ hpc3 ethernet dma/control registers. */
+ struct hpc3_ethregs ethregs;
+
+ /* Here are where the hpc3 fifo's can be directly accessed
+ * via PIO accesses. Under normal operation we never stick
+ * our grubby paws in here so it's just padding. */
+ u32 _unused0[0x18000/4];
+
+ /* HPC3 irq status regs. Due to a peculiar bug you need to
+ * look at two different register addresses to get at all of
+ * the status bits. The first reg can only reliably report
+ * bits 4:0 of the status, and the second reg can only
+ * reliably report bits 9:5 of the hpc3 irq status. I told
+ * you it was a peculiar bug. ;-)
+ */
+ volatile u32 istat0; /* Irq status, only bits <4:0> reliable. */
+#define HPC3_ISTAT_PBIMASK 0x0ff /* irq bits for pbus devs 0 --> 7 */
+#define HPC3_ISTAT_SC0MASK 0x100 /* irq bit for scsi channel 0 */
+#define HPC3_ISTAT_SC1MASK 0x200 /* irq bit for scsi channel 1 */
+
+ volatile u32 gio_misc; /* GIO misc control bits. */
+#define HPC3_GIOMISC_ERTIME 0x1 /* Enable external timer real time. */
+#define HPC3_GIOMISC_DENDIAN 0x2 /* dma descriptor endian, 1=lit 0=big */
+
+ u32 eeprom; /* EEPROM data reg. */
+#define HPC3_EEPROM_EPROT 0x01 /* Protect register enable */
+#define HPC3_EEPROM_CSEL 0x02 /* Chip select */
+#define HPC3_EEPROM_ECLK 0x04 /* EEPROM clock */
+#define HPC3_EEPROM_DATO 0x08 /* Data out */
+#define HPC3_EEPROM_DATI 0x10 /* Data in */
+
+ volatile u32 istat1; /* Irq status, only bits <9:5> reliable. */
+ volatile u32 bestat; /* Bus error interrupt status reg. */
+#define HPC3_BESTAT_BLMASK 0x000ff /* Bus lane where bad parity occurred */
+#define HPC3_BESTAT_CTYPE 0x00100 /* Bus cycle type, 0=PIO 1=DMA */
+#define HPC3_BESTAT_PIDSHIFT 9
+#define HPC3_BESTAT_PIDMASK 0x3f700 /* DMA channel parity identifier */
+
+ u32 _unused1[0x14000/4 - 5]; /* padding */
+
+ /* Now direct PIO per-HPC3 peripheral access to external regs. */
+ volatile u32 scsi0_ext[256]; /* SCSI channel 0 external regs */
+ u32 _unused2[0x7c00/4];
+ volatile u32 scsi1_ext[256]; /* SCSI channel 1 external regs */
+ u32 _unused3[0x7c00/4];
+ volatile u32 eth_ext[320]; /* Ethernet external registers */
+ u32 _unused4[0x3b00/4];
+
+ /* Per-peripheral device external registers and DMA/PIO control. */
+ volatile u32 pbus_extregs[16][256];
+ volatile u32 pbus_dmacfg[8][128];
+ /* Cycles to spend in D3 for reads */
+#define HPC3_DMACFG_D3R_MASK 0x00000001
+#define HPC3_DMACFG_D3R_SHIFT 0
+ /* Cycles to spend in D4 for reads */
+#define HPC3_DMACFG_D4R_MASK 0x0000001e
+#define HPC3_DMACFG_D4R_SHIFT 1
+ /* Cycles to spend in D5 for reads */
+#define HPC3_DMACFG_D5R_MASK 0x000001e0
+#define HPC3_DMACFG_D5R_SHIFT 5
+ /* Cycles to spend in D3 for writes */
+#define HPC3_DMACFG_D3W_MASK 0x00000200
+#define HPC3_DMACFG_D3W_SHIFT 9
+ /* Cycles to spend in D4 for writes */
+#define HPC3_DMACFG_D4W_MASK 0x00003c00
+#define HPC3_DMACFG_D4W_SHIFT 10
+ /* Cycles to spend in D5 for writes */
+#define HPC3_DMACFG_D5W_MASK 0x0003c000
+#define HPC3_DMACFG_D5W_SHIFT 14
+ /* Enable 16-bit DMA access mode */
+#define HPC3_DMACFG_DS16 0x00040000
+ /* Places halfwords on high 16 bits of bus */
+#define HPC3_DMACFG_EVENHI 0x00080000
+ /* Make this device real time */
+#define HPC3_DMACFG_RTIME 0x00200000
+ /* 5 bit burst count for DMA device */
+#define HPC3_DMACFG_BURST_MASK 0x07c00000
+#define HPC3_DMACFG_BURST_SHIFT 22
+ /* Use live pbus_dreq unsynchronized signal */
+#define HPC3_DMACFG_DRQLIVE 0x08000000
+ volatile u32 pbus_piocfg[16][64];
+ /* Cycles to spend in P2 state for reads */
+#define HPC3_PIOCFG_P2R_MASK 0x00001
+#define HPC3_PIOCFG_P2R_SHIFT 0
+ /* Cycles to spend in P3 state for reads */
+#define HPC3_PIOCFG_P3R_MASK 0x0001e
+#define HPC3_PIOCFG_P3R_SHIFT 1
+ /* Cycles to spend in P4 state for reads */
+#define HPC3_PIOCFG_P4R_MASK 0x001e0
+#define HPC3_PIOCFG_P4R_SHIFT 5
+ /* Cycles to spend in P2 state for writes */
+#define HPC3_PIOCFG_P2W_MASK 0x00200
+#define HPC3_PIOCFG_P2W_SHIFT 9
+ /* Cycles to spend in P3 state for writes */
+#define HPC3_PIOCFG_P3W_MASK 0x03c00
+#define HPC3_PIOCFG_P3W_SHIFT 10
+ /* Cycles to spend in P4 state for writes */
+#define HPC3_PIOCFG_P4W_MASK 0x3c000
+#define HPC3_PIOCFG_P4W_SHIFT 14
+ /* Enable 16-bit PIO accesses */
+#define HPC3_PIOCFG_DS16 0x40000
+ /* Place even address bits in bits <15:8> */
+#define HPC3_PIOCFG_EVENHI 0x80000
+
+ /* PBUS PROM control regs. */
+ volatile u32 pbus_promwe; /* PROM write enable register */
+#define HPC3_PROM_WENAB 0x1 /* Enable writes to the PROM */
+
+ u32 _unused5[0x0800/4 - 1];
+ volatile u32 pbus_promswap; /* Chip select swap reg */
+#define HPC3_PROM_SWAP 0x1 /* invert GIO addr bit to select prom0 or prom1 */
+
+ u32 _unused6[0x0800/4 - 1];
+ volatile u32 pbus_gout; /* PROM general purpose output reg */
+#define HPC3_PROM_STAT 0x1 /* General purpose status bit in gout */
+
+ u32 _unused7[0x1000/4 - 1];
+ volatile u32 rtcregs[14]; /* Dallas clock registers */
+ u32 _unused8[50];
+ volatile u32 bbram[8192-50-14]; /* Battery backed ram */
+};
+
+/*
+ * It is possible to have two HPC3's within the address space on
+ * one machine, though only having one is more likely on an Indy.
+ */
+extern struct hpc3_regs *hpc3c0, *hpc3c1;
+#define HPC3_CHIP0_BASE 0x1fb80000 /* physical */
+#define HPC3_CHIP1_BASE 0x1fb00000 /* physical */
+
+extern void sgihpc_init(void);
+
+#endif /* _SGI_HPC3_H */
diff --git a/arch/mips/include/asm/sgi/ioc.h b/arch/mips/include/asm/sgi/ioc.h
new file mode 100644
index 00000000000..343ed15f8dc
--- /dev/null
+++ b/arch/mips/include/asm/sgi/ioc.h
@@ -0,0 +1,200 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * ioc.h: Definitions for SGI I/O Controller
+ *
+ * Copyright (C) 1996 David S. Miller
+ * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle
+ * Copyright (C) 2001, 2003 Ladislav Michl
+ */
+
+#ifndef _SGI_IOC_H
+#define _SGI_IOC_H
+
+#include <linux/types.h>
+#include <asm/sgi/pi1.h>
+
+/*
+ * All registers are 8-bit wide alligned on 32-bit boundary. Bad things
+ * happen if you try word access them. You have been warned.
+ */
+
+struct sgioc_uart_regs {
+ u8 _ctrl1[3];
+ volatile u8 ctrl1;
+ u8 _data1[3];
+ volatile u8 data1;
+ u8 _ctrl2[3];
+ volatile u8 ctrl2;
+ u8 _data2[3];
+ volatile u8 data2;
+};
+
+struct sgioc_keyb_regs {
+ u8 _data[3];
+ volatile u8 data;
+ u8 _command[3];
+ volatile u8 command;
+};
+
+struct sgint_regs {
+ u8 _istat0[3];
+ volatile u8 istat0; /* Interrupt status zero */
+#define SGINT_ISTAT0_FFULL 0x01
+#define SGINT_ISTAT0_SCSI0 0x02
+#define SGINT_ISTAT0_SCSI1 0x04
+#define SGINT_ISTAT0_ENET 0x08
+#define SGINT_ISTAT0_GFXDMA 0x10
+#define SGINT_ISTAT0_PPORT 0x20
+#define SGINT_ISTAT0_HPC2 0x40
+#define SGINT_ISTAT0_LIO2 0x80
+ u8 _imask0[3];
+ volatile u8 imask0; /* Interrupt mask zero */
+ u8 _istat1[3];
+ volatile u8 istat1; /* Interrupt status one */
+#define SGINT_ISTAT1_ISDNI 0x01
+#define SGINT_ISTAT1_PWR 0x02
+#define SGINT_ISTAT1_ISDNH 0x04
+#define SGINT_ISTAT1_LIO3 0x08
+#define SGINT_ISTAT1_HPC3 0x10
+#define SGINT_ISTAT1_AFAIL 0x20
+#define SGINT_ISTAT1_VIDEO 0x40
+#define SGINT_ISTAT1_GIO2 0x80
+ u8 _imask1[3];
+ volatile u8 imask1; /* Interrupt mask one */
+ u8 _vmeistat[3];
+ volatile u8 vmeistat; /* VME interrupt status */
+ u8 _cmeimask0[3];
+ volatile u8 cmeimask0; /* VME interrupt mask zero */
+ u8 _cmeimask1[3];
+ volatile u8 cmeimask1; /* VME interrupt mask one */
+ u8 _cmepol[3];
+ volatile u8 cmepol; /* VME polarity */
+ u8 _tclear[3];
+ volatile u8 tclear;
+ u8 _errstat[3];
+ volatile u8 errstat; /* Error status reg, reserved on INT2 */
+ u32 _unused0[2];
+ u8 _tcnt0[3];
+ volatile u8 tcnt0; /* counter 0 */
+ u8 _tcnt1[3];
+ volatile u8 tcnt1; /* counter 1 */
+ u8 _tcnt2[3];
+ volatile u8 tcnt2; /* counter 2 */
+ u8 _tcword[3];
+ volatile u8 tcword; /* control word */
+#define SGINT_TCWORD_BCD 0x01 /* Use BCD mode for counters */
+#define SGINT_TCWORD_MMASK 0x0e /* Mode bitmask. */
+#define SGINT_TCWORD_MITC 0x00 /* IRQ on terminal count (doesn't work) */
+#define SGINT_TCWORD_MOS 0x02 /* One-shot IRQ mode. */
+#define SGINT_TCWORD_MRGEN 0x04 /* Normal rate generation */
+#define SGINT_TCWORD_MSWGEN 0x06 /* Square wave generator mode */
+#define SGINT_TCWORD_MSWST 0x08 /* Software strobe */
+#define SGINT_TCWORD_MHWST 0x0a /* Hardware strobe */
+#define SGINT_TCWORD_CMASK 0x30 /* Command mask */
+#define SGINT_TCWORD_CLAT 0x00 /* Latch command */
+#define SGINT_TCWORD_CLSB 0x10 /* LSB read/write */
+#define SGINT_TCWORD_CMSB 0x20 /* MSB read/write */
+#define SGINT_TCWORD_CALL 0x30 /* Full counter read/write */
+#define SGINT_TCWORD_CNT0 0x00 /* Select counter zero */
+#define SGINT_TCWORD_CNT1 0x40 /* Select counter one */
+#define SGINT_TCWORD_CNT2 0x80 /* Select counter two */
+#define SGINT_TCWORD_CRBCK 0xc0 /* Readback command */
+};
+
+/*
+ * The timer is the good old 8254. Unlike in PCs it's clocked at exactly 1MHz
+ */
+#define SGINT_TIMER_CLOCK 1000000
+
+/*
+ * This is the constant we're using for calibrating the counter.
+ */
+#define SGINT_TCSAMP_COUNTER ((SGINT_TIMER_CLOCK / HZ) + 255)
+
+/* We need software copies of these because they are write only. */
+extern u8 sgi_ioc_reset, sgi_ioc_write;
+
+struct sgioc_regs {
+ struct pi1_regs pport;
+ u32 _unused0[2];
+ struct sgioc_uart_regs uart;
+ struct sgioc_keyb_regs kbdmouse;
+ u8 _gcsel[3];
+ volatile u8 gcsel;
+ u8 _genctrl[3];
+ volatile u8 genctrl;
+ u8 _panel[3];
+ volatile u8 panel;
+#define SGIOC_PANEL_POWERON 0x01
+#define SGIOC_PANEL_POWERINTR 0x02
+#define SGIOC_PANEL_VOLDNINTR 0x10
+#define SGIOC_PANEL_VOLDNHOLD 0x20
+#define SGIOC_PANEL_VOLUPINTR 0x40
+#define SGIOC_PANEL_VOLUPHOLD 0x80
+ u32 _unused1;
+ u8 _sysid[3];
+ volatile u8 sysid;
+#define SGIOC_SYSID_FULLHOUSE 0x01
+#define SGIOC_SYSID_BOARDREV(x) (((x) & 0x1e) >> 1)
+#define SGIOC_SYSID_CHIPREV(x) (((x) & 0xe0) >> 5)
+ u32 _unused2;
+ u8 _read[3];
+ volatile u8 read;
+ u32 _unused3;
+ u8 _dmasel[3];
+ volatile u8 dmasel;
+#define SGIOC_DMASEL_SCLK10MHZ 0x00 /* use 10MHZ serial clock */
+#define SGIOC_DMASEL_ISDNB 0x01 /* enable isdn B */
+#define SGIOC_DMASEL_ISDNA 0x02 /* enable isdn A */
+#define SGIOC_DMASEL_PPORT 0x04 /* use parallel DMA */
+#define SGIOC_DMASEL_SCLK667MHZ 0x10 /* use 6.67MHZ serial clock */
+#define SGIOC_DMASEL_SCLKEXT 0x20 /* use external serial clock */
+ u32 _unused4;
+ u8 _reset[3];
+ volatile u8 reset;
+#define SGIOC_RESET_PPORT 0x01 /* 0=parport reset, 1=nornal */
+#define SGIOC_RESET_KBDMOUSE 0x02 /* 0=kbdmouse reset, 1=normal */
+#define SGIOC_RESET_EISA 0x04 /* 0=eisa reset, 1=normal */
+#define SGIOC_RESET_ISDN 0x08 /* 0=isdn reset, 1=normal */
+#define SGIOC_RESET_LC0OFF 0x10 /* guiness: turn led off (red, else green) */
+#define SGIOC_RESET_LC1OFF 0x20 /* guiness: turn led off (green, else amber) */
+ u32 _unused5;
+ u8 _write[3];
+ volatile u8 write;
+#define SGIOC_WRITE_NTHRESH 0x01 /* use 4.5db threshhold */
+#define SGIOC_WRITE_TPSPEED 0x02 /* use 100ohm TP speed */
+#define SGIOC_WRITE_EPSEL 0x04 /* force cable mode: 1=AUI 0=TP */
+#define SGIOC_WRITE_EASEL 0x08 /* 1=autoselect 0=manual cable selection */
+#define SGIOC_WRITE_U1AMODE 0x10 /* 1=PC 0=MAC UART mode */
+#define SGIOC_WRITE_U0AMODE 0x20 /* 1=PC 0=MAC UART mode */
+#define SGIOC_WRITE_MLO 0x40 /* 1=4.75V 0=+5V */
+#define SGIOC_WRITE_MHI 0x80 /* 1=5.25V 0=+5V */
+ u32 _unused6;
+ struct sgint_regs int3;
+ u32 _unused7[16];
+ volatile u32 extio; /* FullHouse only */
+#define EXTIO_S0_IRQ_3 0x8000 /* S0: vid.vsync */
+#define EXTIO_S0_IRQ_2 0x4000 /* S0: gfx.fifofull */
+#define EXTIO_S0_IRQ_1 0x2000 /* S0: gfx.int */
+#define EXTIO_S0_RETRACE 0x1000
+#define EXTIO_SG_IRQ_3 0x0800 /* SG: vid.vsync */
+#define EXTIO_SG_IRQ_2 0x0400 /* SG: gfx.fifofull */
+#define EXTIO_SG_IRQ_1 0x0200 /* SG: gfx.int */
+#define EXTIO_SG_RETRACE 0x0100
+#define EXTIO_GIO_33MHZ 0x0080
+#define EXTIO_EISA_BUSERR 0x0040
+#define EXTIO_MC_BUSERR 0x0020
+#define EXTIO_HPC3_BUSERR 0x0010
+#define EXTIO_S0_STAT_1 0x0008
+#define EXTIO_S0_STAT_0 0x0004
+#define EXTIO_SG_STAT_1 0x0002
+#define EXTIO_SG_STAT_0 0x0001
+};
+
+extern struct sgioc_regs *sgioc;
+extern struct sgint_regs *sgint;
+
+#endif
diff --git a/arch/mips/include/asm/sgi/ip22.h b/arch/mips/include/asm/sgi/ip22.h
new file mode 100644
index 00000000000..c0501f91719
--- /dev/null
+++ b/arch/mips/include/asm/sgi/ip22.h
@@ -0,0 +1,78 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * ip22.h: Definitions for SGI IP22 machines
+ *
+ * Copyright (C) 1996 David S. Miller
+ * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle
+ */
+
+#ifndef _SGI_IP22_H
+#define _SGI_IP22_H
+
+/*
+ * These are the virtual IRQ numbers, we divide all IRQ's into
+ * 'spaces', the 'space' determines where and how to enable/disable
+ * that particular IRQ on an SGI machine. HPC DMA and MC DMA interrupts
+ * are not supported this way. Driver is supposed to allocate HPC/MC
+ * interrupt as shareable and then look to proper status bit (see
+ * HAL2 driver). This will prevent many complications, trust me ;-)
+ */
+
+#include <irq.h>
+#include <asm/sgi/ioc.h>
+
+#define SGINT_EISA 0 /* 16 EISA irq levels (Indigo2) */
+#define SGINT_CPU MIPS_CPU_IRQ_BASE /* MIPS CPU define 8 interrupt sources */
+#define SGINT_LOCAL0 (SGINT_CPU+8) /* 8 local0 irq levels */
+#define SGINT_LOCAL1 (SGINT_CPU+16) /* 8 local1 irq levels */
+#define SGINT_LOCAL2 (SGINT_CPU+24) /* 8 local2 vectored irq levels */
+#define SGINT_LOCAL3 (SGINT_CPU+32) /* 8 local3 vectored irq levels */
+#define SGINT_END (SGINT_CPU+40) /* End of 'spaces' */
+
+/*
+ * Individual interrupt definitions for the Indy and Indigo2
+ */
+
+#define SGI_SOFT_0_IRQ SGINT_CPU + 0
+#define SGI_SOFT_1_IRQ SGINT_CPU + 1
+#define SGI_LOCAL_0_IRQ SGINT_CPU + 2
+#define SGI_LOCAL_1_IRQ SGINT_CPU + 3
+#define SGI_8254_0_IRQ SGINT_CPU + 4
+#define SGI_8254_1_IRQ SGINT_CPU + 5
+#define SGI_BUSERR_IRQ SGINT_CPU + 6
+#define SGI_TIMER_IRQ SGINT_CPU + 7
+
+#define SGI_FIFO_IRQ SGINT_LOCAL0 + 0 /* FIFO full */
+#define SGI_GIO_0_IRQ SGI_FIFO_IRQ /* GIO-0 */
+#define SGI_WD93_0_IRQ SGINT_LOCAL0 + 1 /* 1st onboard WD93 */
+#define SGI_WD93_1_IRQ SGINT_LOCAL0 + 2 /* 2nd onboard WD93 */
+#define SGI_ENET_IRQ SGINT_LOCAL0 + 3 /* onboard ethernet */
+#define SGI_MCDMA_IRQ SGINT_LOCAL0 + 4 /* MC DMA done */
+#define SGI_PARPORT_IRQ SGINT_LOCAL0 + 5 /* Parallel port */
+#define SGI_GIO_1_IRQ SGINT_LOCAL0 + 6 /* GE / GIO-1 / 2nd-HPC */
+#define SGI_MAP_0_IRQ SGINT_LOCAL0 + 7 /* Mappable interrupt 0 */
+
+#define SGI_GPL0_IRQ SGINT_LOCAL1 + 0 /* General Purpose LOCAL1_N<0> */
+#define SGI_PANEL_IRQ SGINT_LOCAL1 + 1 /* front panel */
+#define SGI_GPL2_IRQ SGINT_LOCAL1 + 2 /* General Purpose LOCAL1_N<2> */
+#define SGI_MAP_1_IRQ SGINT_LOCAL1 + 3 /* Mappable interrupt 1 */
+#define SGI_HPCDMA_IRQ SGINT_LOCAL1 + 4 /* HPC DMA done */
+#define SGI_ACFAIL_IRQ SGINT_LOCAL1 + 5 /* AC fail */
+#define SGI_VINO_IRQ SGINT_LOCAL1 + 6 /* Indy VINO */
+#define SGI_GIO_2_IRQ SGINT_LOCAL1 + 7 /* Vert retrace / GIO-2 */
+
+/* Mapped interrupts. These interrupts may be mapped to either 0, or 1 */
+#define SGI_VERT_IRQ SGINT_LOCAL2 + 0 /* INT3: newport vertical status */
+#define SGI_EISA_IRQ SGINT_LOCAL2 + 3 /* EISA interrupts */
+#define SGI_KEYBD_IRQ SGINT_LOCAL2 + 4 /* keyboard */
+#define SGI_SERIAL_IRQ SGINT_LOCAL2 + 5 /* onboard serial */
+
+#define ip22_is_fullhouse() (sgioc->sysid & SGIOC_SYSID_FULLHOUSE)
+
+extern unsigned short ip22_eeprom_read(unsigned int *ctrl, int reg);
+extern unsigned short ip22_nvram_read(int reg);
+
+#endif
diff --git a/arch/mips/include/asm/sgi/mc.h b/arch/mips/include/asm/sgi/mc.h
new file mode 100644
index 00000000000..1576c2394de
--- /dev/null
+++ b/arch/mips/include/asm/sgi/mc.h
@@ -0,0 +1,231 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * mc.h: Definitions for SGI Memory Controller
+ *
+ * Copyright (C) 1996 David S. Miller
+ * Copyright (C) 1999 Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+
+#ifndef _SGI_MC_H
+#define _SGI_MC_H
+
+struct sgimc_regs {
+ u32 _unused0;
+ volatile u32 cpuctrl0; /* CPU control register 0, readwrite */
+#define SGIMC_CCTRL0_REFS 0x0000000f /* REFS mask */
+#define SGIMC_CCTRL0_EREFRESH 0x00000010 /* Memory refresh enable */
+#define SGIMC_CCTRL0_EPERRGIO 0x00000020 /* GIO parity error enable */
+#define SGIMC_CCTRL0_EPERRMEM 0x00000040 /* Main mem parity error enable */
+#define SGIMC_CCTRL0_EPERRCPU 0x00000080 /* CPU bus parity error enable */
+#define SGIMC_CCTRL0_WDOG 0x00000100 /* Watchdog timer enable */
+#define SGIMC_CCTRL0_SYSINIT 0x00000200 /* System init bit */
+#define SGIMC_CCTRL0_GFXRESET 0x00000400 /* Graphics interface reset */
+#define SGIMC_CCTRL0_EISALOCK 0x00000800 /* Lock CPU from memory for EISA */
+#define SGIMC_CCTRL0_EPERRSCMD 0x00001000 /* SysCMD bus parity error enable */
+#define SGIMC_CCTRL0_IENAB 0x00002000 /* Allow interrupts from MC */
+#define SGIMC_CCTRL0_ESNOOP 0x00004000 /* Snooping I/O enable */
+#define SGIMC_CCTRL0_EPROMWR 0x00008000 /* Prom writes from cpu enable */
+#define SGIMC_CCTRL0_WRESETPMEM 0x00010000 /* Perform warm reset, preserves mem */
+#define SGIMC_CCTRL0_LENDIAN 0x00020000 /* Put MC in little-endian mode */
+#define SGIMC_CCTRL0_WRESETDMEM 0x00040000 /* Warm reset, destroys mem contents */
+#define SGIMC_CCTRL0_CMEMBADPAR 0x02000000 /* Generate bad perr from cpu to mem */
+#define SGIMC_CCTRL0_R4KNOCHKPARR 0x04000000 /* Don't chk parity on mem data reads */
+#define SGIMC_CCTRL0_GIOBTOB 0x08000000 /* Allow GIO back to back writes */
+ u32 _unused1;
+ volatile u32 cpuctrl1; /* CPU control register 1, readwrite */
+#define SGIMC_CCTRL1_EGIOTIMEO 0x00000010 /* GIO bus timeout enable */
+#define SGIMC_CCTRL1_FIXEDEHPC 0x00001000 /* Fixed HPC endianness */
+#define SGIMC_CCTRL1_LITTLEHPC 0x00002000 /* Little endian HPC */
+#define SGIMC_CCTRL1_FIXEDEEXP0 0x00004000 /* Fixed EXP0 endianness */
+#define SGIMC_CCTRL1_LITTLEEXP0 0x00008000 /* Little endian EXP0 */
+#define SGIMC_CCTRL1_FIXEDEEXP1 0x00010000 /* Fixed EXP1 endianness */
+#define SGIMC_CCTRL1_LITTLEEXP1 0x00020000 /* Little endian EXP1 */
+
+ u32 _unused2;
+ volatile u32 watchdogt; /* Watchdog reg rdonly, write clears */
+
+ u32 _unused3;
+ volatile u32 systemid; /* MC system ID register, readonly */
+#define SGIMC_SYSID_MASKREV 0x0000000f /* Revision of MC controller */
+#define SGIMC_SYSID_EPRESENT 0x00000010 /* Indicates presence of EISA bus */
+
+ u32 _unused4[3];
+ volatile u32 divider; /* Divider reg for RPSS */
+
+ u32 _unused5;
+ u32 eeprom; /* EEPROM byte reg for r4k */
+#define SGIMC_EEPROM_PRE 0x00000001 /* eeprom chip PRE pin assertion */
+#define SGIMC_EEPROM_CSEL 0x00000002 /* Active high, eeprom chip select */
+#define SGIMC_EEPROM_SECLOCK 0x00000004 /* EEPROM serial clock */
+#define SGIMC_EEPROM_SDATAO 0x00000008 /* Serial EEPROM data-out */
+#define SGIMC_EEPROM_SDATAI 0x00000010 /* Serial EEPROM data-in */
+
+ u32 _unused6[3];
+ volatile u32 rcntpre; /* Preload refresh counter */
+
+ u32 _unused7;
+ volatile u32 rcounter; /* Readonly refresh counter */
+
+ u32 _unused8[13];
+ volatile u32 giopar; /* Parameter word for GIO64 */
+#define SGIMC_GIOPAR_HPC64 0x00000001 /* HPC talks to GIO using 64-bits */
+#define SGIMC_GIOPAR_GFX64 0x00000002 /* GFX talks to GIO using 64-bits */
+#define SGIMC_GIOPAR_EXP064 0x00000004 /* EXP(slot0) talks using 64-bits */
+#define SGIMC_GIOPAR_EXP164 0x00000008 /* EXP(slot1) talks using 64-bits */
+#define SGIMC_GIOPAR_EISA64 0x00000010 /* EISA bus talks 64-bits to GIO */
+#define SGIMC_GIOPAR_HPC264 0x00000020 /* 2nd HPX talks 64-bits to GIO */
+#define SGIMC_GIOPAR_RTIMEGFX 0x00000040 /* GFX device has realtime attr */
+#define SGIMC_GIOPAR_RTIMEEXP0 0x00000080 /* EXP(slot0) has realtime attr */
+#define SGIMC_GIOPAR_RTIMEEXP1 0x00000100 /* EXP(slot1) has realtime attr */
+#define SGIMC_GIOPAR_MASTEREISA 0x00000200 /* EISA bus can act as bus master */
+#define SGIMC_GIOPAR_ONEBUS 0x00000400 /* Exists one GIO64 pipelined bus */
+#define SGIMC_GIOPAR_MASTERGFX 0x00000800 /* GFX can act as a bus master */
+#define SGIMC_GIOPAR_MASTEREXP0 0x00001000 /* EXP(slot0) can bus master */
+#define SGIMC_GIOPAR_MASTEREXP1 0x00002000 /* EXP(slot1) can bus master */
+#define SGIMC_GIOPAR_PLINEEXP0 0x00004000 /* EXP(slot0) has pipeline attr */
+#define SGIMC_GIOPAR_PLINEEXP1 0x00008000 /* EXP(slot1) has pipeline attr */
+
+ u32 _unused9;
+ volatile u32 cputp; /* CPU bus arb time period */
+
+ u32 _unused10[3];
+ volatile u32 lbursttp; /* Time period for long bursts */
+
+ /* MC chip can drive up to 4 bank 4 SIMMs each. All SIMMs in bank must
+ * be the same size. The size encoding for supported SIMMs is bellow */
+ u32 _unused11[9];
+ volatile u32 mconfig0; /* Memory config register zero */
+ u32 _unused12;
+ volatile u32 mconfig1; /* Memory config register one */
+#define SGIMC_MCONFIG_BASEADDR 0x000000ff /* Base address of bank*/
+#define SGIMC_MCONFIG_RMASK 0x00001f00 /* Ram config bitmask */
+#define SGIMC_MCONFIG_BVALID 0x00002000 /* Bank is valid */
+#define SGIMC_MCONFIG_SBANKS 0x00004000 /* Number of subbanks */
+
+ u32 _unused13;
+ volatile u32 cmacc; /* Mem access config for CPU */
+ u32 _unused14;
+ volatile u32 gmacc; /* Mem access config for GIO */
+
+ /* This define applies to both cmacc and gmacc registers above. */
+#define SGIMC_MACC_ALIASBIG 0x20000000 /* 512MB home for alias */
+
+ /* Error address/status regs from GIO and CPU perspectives. */
+ u32 _unused15;
+ volatile u32 cerr; /* Error address reg for CPU */
+ u32 _unused16;
+ volatile u32 cstat; /* Status reg for CPU */
+#define SGIMC_CSTAT_RD 0x00000100 /* read parity error */
+#define SGIMC_CSTAT_PAR 0x00000200 /* CPU parity error */
+#define SGIMC_CSTAT_ADDR 0x00000400 /* memory bus error bad addr */
+#define SGIMC_CSTAT_SYSAD_PAR 0x00000800 /* sysad parity error */
+#define SGIMC_CSTAT_SYSCMD_PAR 0x00001000 /* syscmd parity error */
+#define SGIMC_CSTAT_BAD_DATA 0x00002000 /* bad data identifier */
+#define SGIMC_CSTAT_PAR_MASK 0x00001f00 /* parity error mask */
+#define SGIMC_CSTAT_RD_PAR (SGIMC_CSTAT_RD | SGIMC_CSTAT_PAR)
+
+ u32 _unused17;
+ volatile u32 gerr; /* Error address reg for GIO */
+ u32 _unused18;
+ volatile u32 gstat; /* Status reg for GIO */
+#define SGIMC_GSTAT_RD 0x00000100 /* read parity error */
+#define SGIMC_GSTAT_WR 0x00000200 /* write parity error */
+#define SGIMC_GSTAT_TIME 0x00000400 /* GIO bus timed out */
+#define SGIMC_GSTAT_PROM 0x00000800 /* write to PROM when PROM_EN not set */
+#define SGIMC_GSTAT_ADDR 0x00001000 /* parity error on addr cycle */
+#define SGIMC_GSTAT_BC 0x00002000 /* parity error on byte count cycle */
+#define SGIMC_GSTAT_PIO_RD 0x00004000 /* read data parity on pio */
+#define SGIMC_GSTAT_PIO_WR 0x00008000 /* write data parity on pio */
+
+ /* Special hard bus locking registers. */
+ u32 _unused19;
+ volatile u32 syssembit; /* Uni-bit system semaphore */
+ u32 _unused20;
+ volatile u32 mlock; /* Global GIO memory access lock */
+ u32 _unused21;
+ volatile u32 elock; /* Locks EISA from GIO accesses */
+
+ /* GIO dma control registers. */
+ u32 _unused22[15];
+ volatile u32 gio_dma_trans; /* DMA mask to translation GIO addrs */
+ u32 _unused23;
+ volatile u32 gio_dma_sbits; /* DMA GIO addr substitution bits */
+ u32 _unused24;
+ volatile u32 dma_intr_cause; /* DMA IRQ cause indicator bits */
+ u32 _unused25;
+ volatile u32 dma_ctrl; /* Main DMA control reg */
+
+ /* DMA TLB entry 0 */
+ u32 _unused26[5];
+ volatile u32 dtlb_hi0;
+ u32 _unused27;
+ volatile u32 dtlb_lo0;
+
+ /* DMA TLB entry 1 */
+ u32 _unused28;
+ volatile u32 dtlb_hi1;
+ u32 _unused29;
+ volatile u32 dtlb_lo1;
+
+ /* DMA TLB entry 2 */
+ u32 _unused30;
+ volatile u32 dtlb_hi2;
+ u32 _unused31;
+ volatile u32 dtlb_lo2;
+
+ /* DMA TLB entry 3 */
+ u32 _unused32;
+ volatile u32 dtlb_hi3;
+ u32 _unused33;
+ volatile u32 dtlb_lo3;
+
+ u32 _unused34[0x0392];
+
+ u32 _unused35;
+ volatile u32 rpsscounter; /* Chirps at 100ns */
+
+ u32 _unused36[0x1000/4-2*4];
+
+ u32 _unused37;
+ volatile u32 maddronly; /* Address DMA goes at */
+ u32 _unused38;
+ volatile u32 maddrpdeflts; /* Same as above, plus set defaults */
+ u32 _unused39;
+ volatile u32 dmasz; /* DMA count */
+ u32 _unused40;
+ volatile u32 ssize; /* DMA stride size */
+ u32 _unused41;
+ volatile u32 gmaddronly; /* Set GIO DMA but don't start trans */
+ u32 _unused42;
+ volatile u32 dmaddnpgo; /* Set GIO DMA addr + start transfer */
+ u32 _unused43;
+ volatile u32 dmamode; /* DMA mode config bit settings */
+ u32 _unused44;
+ volatile u32 dmaccount; /* Zoom and byte count for DMA */
+ u32 _unused45;
+ volatile u32 dmastart; /* Pedal to the metal. */
+ u32 _unused46;
+ volatile u32 dmarunning; /* DMA op is in progress */
+ u32 _unused47;
+ volatile u32 maddrdefstart; /* Set dma addr, defaults, and kick it */
+};
+
+extern struct sgimc_regs *sgimc;
+#define SGIMC_BASE 0x1fa00000 /* physical */
+
+/* Base location of the two ram banks found in IP2[0268] machines. */
+#define SGIMC_SEG0_BADDR 0x08000000
+#define SGIMC_SEG1_BADDR 0x20000000
+
+/* Maximum size of the above banks are per machine. */
+#define SGIMC_SEG0_SIZE_ALL 0x10000000 /* 256MB */
+#define SGIMC_SEG1_SIZE_IP20_IP22 0x08000000 /* 128MB */
+#define SGIMC_SEG1_SIZE_IP26_IP28 0x20000000 /* 512MB */
+
+extern void sgimc_init(void);
+
+#endif /* _SGI_MC_H */
diff --git a/arch/mips/include/asm/sgi/pi1.h b/arch/mips/include/asm/sgi/pi1.h
new file mode 100644
index 00000000000..c9506915dc5
--- /dev/null
+++ b/arch/mips/include/asm/sgi/pi1.h
@@ -0,0 +1,71 @@
+/*
+ * pi1.h: Definitions for SGI PI1 parallel port
+ */
+
+#ifndef _SGI_PI1_H
+#define _SGI_PI1_H
+
+struct pi1_regs {
+ u8 _data[3];
+ volatile u8 data;
+ u8 _ctrl[3];
+ volatile u8 ctrl;
+#define PI1_CTRL_STROBE_N 0x01
+#define PI1_CTRL_AFD_N 0x02
+#define PI1_CTRL_INIT_N 0x04
+#define PI1_CTRL_SLIN_N 0x08
+#define PI1_CTRL_IRQ_ENA 0x10
+#define PI1_CTRL_DIR 0x20
+#define PI1_CTRL_SEL 0x40
+ u8 _status[3];
+ volatile u8 status;
+#define PI1_STAT_DEVID 0x03 /* bits 0-1 */
+#define PI1_STAT_NOINK 0x04 /* SGI MODE only */
+#define PI1_STAT_ERROR 0x08
+#define PI1_STAT_ONLINE 0x10
+#define PI1_STAT_PE 0x20
+#define PI1_STAT_ACK 0x40
+#define PI1_STAT_BUSY 0x80
+ u8 _dmactrl[3];
+ volatile u8 dmactrl;
+#define PI1_DMACTRL_FIFO_EMPTY 0x01 /* fifo empty R/O */
+#define PI1_DMACTRL_ABORT 0x02 /* reset DMA and internal fifo W/O */
+#define PI1_DMACTRL_STDMODE 0x00 /* bits 2-3 */
+#define PI1_DMACTRL_SGIMODE 0x04 /* bits 2-3 */
+#define PI1_DMACTRL_RICOHMODE 0x08 /* bits 2-3 */
+#define PI1_DMACTRL_HPMODE 0x0c /* bits 2-3 */
+#define PI1_DMACTRL_BLKMODE 0x10 /* block mode */
+#define PI1_DMACTRL_FIFO_CLEAR 0x20 /* clear fifo W/O */
+#define PI1_DMACTRL_READ 0x40 /* read */
+#define PI1_DMACTRL_RUN 0x80 /* pedal to the metal */
+ u8 _intstat[3];
+ volatile u8 intstat;
+#define PI1_INTSTAT_ACK 0x04
+#define PI1_INTSTAT_FEMPTY 0x08
+#define PI1_INTSTAT_NOINK 0x10
+#define PI1_INTSTAT_ONLINE 0x20
+#define PI1_INTSTAT_ERR 0x40
+#define PI1_INTSTAT_PE 0x80
+ u8 _intmask[3];
+ volatile u8 intmask; /* enabled low, reset high*/
+#define PI1_INTMASK_ACK 0x04
+#define PI1_INTMASK_FIFO_EMPTY 0x08
+#define PI1_INTMASK_NOINK 0x10
+#define PI1_INTMASK_ONLINE 0x20
+#define PI1_INTMASK_ERR 0x40
+#define PI1_INTMASK_PE 0x80
+ u8 _timer1[3];
+ volatile u8 timer1;
+#define PI1_TIME1 0x27
+ u8 _timer2[3];
+ volatile u8 timer2;
+#define PI1_TIME2 0x13
+ u8 _timer3[3];
+ volatile u8 timer3;
+#define PI1_TIME3 0x10
+ u8 _timer4[3];
+ volatile u8 timer4;
+#define PI1_TIME4 0x00
+};
+
+#endif
diff --git a/arch/mips/include/asm/sgi/seeq.h b/arch/mips/include/asm/sgi/seeq.h
new file mode 100644
index 00000000000..af0ffd76899
--- /dev/null
+++ b/arch/mips/include/asm/sgi/seeq.h
@@ -0,0 +1,21 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 by Ralf Baechle
+ */
+#ifndef __ASM_SGI_SEEQ_H
+#define __ASM_SGI_SEEQ_H
+
+#include <linux/if_ether.h>
+
+#include <asm/sgi/hpc3.h>
+
+struct sgiseeq_platform_data {
+ struct hpc3_regs *hpc;
+ unsigned int irq;
+ unsigned char mac[ETH_ALEN];
+};
+
+#endif /* __ASM_SGI_SEEQ_H */
diff --git a/arch/mips/include/asm/sgi/sgi.h b/arch/mips/include/asm/sgi/sgi.h
new file mode 100644
index 00000000000..645cea7c0f8
--- /dev/null
+++ b/arch/mips/include/asm/sgi/sgi.h
@@ -0,0 +1,47 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * sgi.h: Definitions specific to SGI machines.
+ *
+ * Copyright (C) 1996 David S. Miller (dm@sgi.com)
+ */
+#ifndef _ASM_SGI_SGI_H
+#define _ASM_SGI_SGI_H
+
+/* UP=UniProcessor MP=MultiProcessor(capable) */
+enum sgi_mach {
+ ip4, /* R2k UP */
+ ip5, /* R2k MP */
+ ip6, /* R3k UP */
+ ip7, /* R3k MP */
+ ip9, /* R3k UP */
+ ip12, /* R3kA UP, Indigo */
+ ip15, /* R3kA MP */
+ ip17, /* R4K UP */
+ ip19, /* R4K MP */
+ ip20, /* R4K UP, Indigo */
+ ip21, /* TFP MP */
+ ip22, /* R4x00 UP, Indigo2 */
+ ip25, /* R10k MP */
+ ip26, /* TFP UP, Indigo2 */
+ ip27, /* R10k MP, R12k MP, Origin */
+ ip28, /* R10k UP, Indigo2 */
+ ip30, /* Octane */
+ ip32, /* O2 */
+};
+
+extern enum sgi_mach sgimach;
+extern void sgi_sysinit(void);
+
+/* Many I/O space registers are byte sized and are contained within
+ * one byte per word, specifically the MSB, this macro helps out.
+ */
+#ifdef __MIPSEL__
+#define SGI_MSB(regaddr) (regaddr)
+#else
+#define SGI_MSB(regaddr) ((regaddr) | 0x3)
+#endif
+
+#endif /* _ASM_SGI_SGI_H */
diff --git a/arch/mips/include/asm/sgi/wd.h b/arch/mips/include/asm/sgi/wd.h
new file mode 100644
index 00000000000..0d6c3a4da89
--- /dev/null
+++ b/arch/mips/include/asm/sgi/wd.h
@@ -0,0 +1,20 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 by Ralf Baechle
+ */
+#ifndef __ASM_SGI_WD_H
+#define __ASM_SGI_WD_H
+
+#include <asm/sgi/hpc3.h>
+
+struct sgiwd93_platform_data {
+ unsigned int unit;
+ unsigned int irq;
+ struct hpc3_scsiregs *hregs;
+ unsigned char *wdregs;
+};
+
+#endif /* __ASM_SGI_WD_H */
diff --git a/arch/mips/include/asm/sgialib.h b/arch/mips/include/asm/sgialib.h
new file mode 100644
index 00000000000..bfce5c786f1
--- /dev/null
+++ b/arch/mips/include/asm/sgialib.h
@@ -0,0 +1,124 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI ARCS firmware interface library for the Linux kernel.
+ *
+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 2001, 2002 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_SGIALIB_H
+#define _ASM_SGIALIB_H
+
+#include <asm/sgiarcs.h>
+
+extern struct linux_romvec *romvec;
+extern int prom_argc;
+
+extern LONG *_prom_argv, *_prom_envp;
+
+/* A 32-bit ARC PROM pass arguments and environment as 32-bit pointer.
+ These macros take care of sign extension. */
+#define prom_argv(index) ((char *) (long) _prom_argv[(index)])
+#define prom_argc(index) ((char *) (long) _prom_argc[(index)])
+
+extern int prom_flags;
+
+#define PROM_FLAG_ARCS 1
+#define PROM_FLAG_USE_AS_CONSOLE 2
+#define PROM_FLAG_DONT_FREE_TEMP 4
+
+/* Simple char-by-char console I/O. */
+extern void prom_putchar(char c);
+extern char prom_getchar(void);
+
+/* Memory descriptor management. */
+#define PROM_MAX_PMEMBLOCKS 32
+struct prom_pmemblock {
+ LONG base; /* Within KSEG0 or XKPHYS. */
+ ULONG size; /* In bytes. */
+ ULONG type; /* free or prom memory */
+};
+
+/* Get next memory descriptor after CURR, returns first descriptor
+ * in chain is CURR is NULL.
+ */
+extern struct linux_mdesc *prom_getmdesc(struct linux_mdesc *curr);
+#define PROM_NULL_MDESC ((struct linux_mdesc *) 0)
+
+/* Called by prom_init to setup the physical memory pmemblock
+ * array.
+ */
+extern void prom_meminit(void);
+extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem);
+
+/* PROM device tree library routines. */
+#define PROM_NULL_COMPONENT ((pcomponent *) 0)
+
+/* Get sibling component of THIS. */
+extern pcomponent *ArcGetPeer(pcomponent *this);
+
+/* Get child component of THIS. */
+extern pcomponent *ArcGetChild(pcomponent *this);
+
+/* Get parent component of CHILD. */
+extern pcomponent *prom_getparent(pcomponent *child);
+
+/* Copy component opaque data of component THIS into BUFFER
+ * if component THIS has opaque data. Returns success or
+ * failure status.
+ */
+extern long prom_getcdata(void *buffer, pcomponent *this);
+
+/* Other misc. component routines. */
+extern pcomponent *prom_childadd(pcomponent *this, pcomponent *tmp, void *data);
+extern long prom_delcomponent(pcomponent *this);
+extern pcomponent *prom_componentbypath(char *path);
+
+/* This is called at prom_init time to identify the
+ * ARC architecture we are running on
+ */
+extern void prom_identify_arch(void);
+
+/* Environment variable routines. */
+extern PCHAR ArcGetEnvironmentVariable(PCHAR name);
+extern LONG ArcSetEnvironmentVariable(PCHAR name, PCHAR value);
+
+/* ARCS command line acquisition and parsing. */
+extern char *prom_getcmdline(void);
+extern void prom_init_cmdline(void);
+
+/* Acquiring info about the current time, etc. */
+extern struct linux_tinfo *prom_gettinfo(void);
+extern unsigned long prom_getrtime(void);
+
+/* File operations. */
+extern long prom_getvdirent(unsigned long fd, struct linux_vdirent *ent, unsigned long num, unsigned long *cnt);
+extern long prom_open(char *name, enum linux_omode md, unsigned long *fd);
+extern long prom_close(unsigned long fd);
+extern LONG ArcRead(ULONG fd, PVOID buf, ULONG num, PULONG cnt);
+extern long prom_getrstatus(unsigned long fd);
+extern LONG ArcWrite(ULONG fd, PVOID buf, ULONG num, PULONG cnt);
+extern long prom_seek(unsigned long fd, struct linux_bigint *off, enum linux_seekmode sm);
+extern long prom_mount(char *name, enum linux_mountops op);
+extern long prom_getfinfo(unsigned long fd, struct linux_finfo *buf);
+extern long prom_setfinfo(unsigned long fd, unsigned long flags, unsigned long msk);
+
+/* Running stand-along programs. */
+extern long prom_load(char *name, unsigned long end, unsigned long *pc, unsigned long *eaddr);
+extern long prom_invoke(unsigned long pc, unsigned long sp, long argc, char **argv, char **envp);
+extern long prom_exec(char *name, long argc, char **argv, char **envp);
+
+/* Misc. routines. */
+extern VOID prom_halt(VOID) __attribute__((noreturn));
+extern VOID prom_powerdown(VOID) __attribute__((noreturn));
+extern VOID prom_restart(VOID) __attribute__((noreturn));
+extern VOID ArcReboot(VOID) __attribute__((noreturn));
+extern VOID ArcEnterInteractiveMode(VOID) __attribute__((noreturn));
+extern long prom_cfgsave(VOID);
+extern struct linux_sysid *prom_getsysid(VOID);
+extern VOID ArcFlushAllCaches(VOID);
+extern DISPLAY_STATUS *ArcGetDisplayStatus(ULONG FileID);
+
+#endif /* _ASM_SGIALIB_H */
diff --git a/arch/mips/include/asm/sgiarcs.h b/arch/mips/include/asm/sgiarcs.h
new file mode 100644
index 00000000000..721327f8860
--- /dev/null
+++ b/arch/mips/include/asm/sgiarcs.h
@@ -0,0 +1,548 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * ARC firmware interface defines.
+ *
+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 1999, 2001 Ralf Baechle (ralf@gnu.org)
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SGIARCS_H
+#define _ASM_SGIARCS_H
+
+#include <asm/types.h>
+#include <asm/fw/arc/types.h>
+
+/* Various ARCS error codes. */
+#define PROM_ESUCCESS 0x00
+#define PROM_E2BIG 0x01
+#define PROM_EACCESS 0x02
+#define PROM_EAGAIN 0x03
+#define PROM_EBADF 0x04
+#define PROM_EBUSY 0x05
+#define PROM_EFAULT 0x06
+#define PROM_EINVAL 0x07
+#define PROM_EIO 0x08
+#define PROM_EISDIR 0x09
+#define PROM_EMFILE 0x0a
+#define PROM_EMLINK 0x0b
+#define PROM_ENAMETOOLONG 0x0c
+#define PROM_ENODEV 0x0d
+#define PROM_ENOENT 0x0e
+#define PROM_ENOEXEC 0x0f
+#define PROM_ENOMEM 0x10
+#define PROM_ENOSPC 0x11
+#define PROM_ENOTDIR 0x12
+#define PROM_ENOTTY 0x13
+#define PROM_ENXIO 0x14
+#define PROM_EROFS 0x15
+/* SGI ARCS specific errno's. */
+#define PROM_EADDRNOTAVAIL 0x1f
+#define PROM_ETIMEDOUT 0x20
+#define PROM_ECONNABORTED 0x21
+#define PROM_ENOCONNECT 0x22
+
+/* Device classes, types, and identifiers for prom
+ * device inventory queries.
+ */
+enum linux_devclass {
+ system, processor, cache, adapter, controller, peripheral, memory
+};
+
+enum linux_devtypes {
+ /* Generic stuff. */
+ Arc, Cpu, Fpu,
+
+ /* Primary insn and data caches. */
+ picache, pdcache,
+
+ /* Secondary insn, data, and combined caches. */
+ sicache, sdcache, sccache,
+
+ memdev, eisa_adapter, tc_adapter, scsi_adapter, dti_adapter,
+ multifunc_adapter, dsk_controller, tp_controller, cdrom_controller,
+ worm_controller, serial_controller, net_controller, disp_controller,
+ parallel_controller, ptr_controller, kbd_controller, audio_controller,
+ misc_controller, disk_peripheral, flpy_peripheral, tp_peripheral,
+ modem_peripheral, monitor_peripheral, printer_peripheral,
+ ptr_peripheral, kbd_peripheral, term_peripheral, line_peripheral,
+ net_peripheral, misc_peripheral, anon
+};
+
+enum linux_identifier {
+ bogus, ronly, removable, consin, consout, input, output
+};
+
+/* A prom device tree component. */
+struct linux_component {
+ enum linux_devclass class; /* node class */
+ enum linux_devtypes type; /* node type */
+ enum linux_identifier iflags; /* node flags */
+ USHORT vers; /* node version */
+ USHORT rev; /* node revision */
+ ULONG key; /* completely magic */
+ ULONG amask; /* XXX affinity mask??? */
+ ULONG cdsize; /* size of configuration data */
+ ULONG ilen; /* length of string identifier */
+ _PULONG iname; /* string identifier */
+};
+typedef struct linux_component pcomponent;
+
+struct linux_sysid {
+ char vend[8], prod[8];
+};
+
+/* ARCS prom memory descriptors. */
+enum arcs_memtypes {
+ arcs_eblock, /* exception block */
+ arcs_rvpage, /* ARCS romvec page */
+ arcs_fcontig, /* Contiguous and free */
+ arcs_free, /* Generic free memory */
+ arcs_bmem, /* Borken memory, don't use */
+ arcs_prog, /* A loaded program resides here */
+ arcs_atmp, /* ARCS temporary storage area, wish Sparc OpenBoot told this */
+ arcs_aperm, /* ARCS permanent storage... */
+};
+
+/* ARC has slightly different types than ARCS */
+enum arc_memtypes {
+ arc_eblock, /* exception block */
+ arc_rvpage, /* romvec page */
+ arc_free, /* Generic free memory */
+ arc_bmem, /* Borken memory, don't use */
+ arc_prog, /* A loaded program resides here */
+ arc_atmp, /* temporary storage area */
+ arc_aperm, /* permanent storage */
+ arc_fcontig, /* Contiguous and free */
+};
+
+union linux_memtypes {
+ enum arcs_memtypes arcs;
+ enum arc_memtypes arc;
+};
+
+struct linux_mdesc {
+ union linux_memtypes type;
+ ULONG base;
+ ULONG pages;
+};
+
+/* Time of day descriptor. */
+struct linux_tinfo {
+ unsigned short yr;
+ unsigned short mnth;
+ unsigned short day;
+ unsigned short hr;
+ unsigned short min;
+ unsigned short sec;
+ unsigned short msec;
+};
+
+/* ARCS virtual dirents. */
+struct linux_vdirent {
+ ULONG namelen;
+ unsigned char attr;
+ char fname[32]; /* XXX imperical, should be a define */
+};
+
+/* Other stuff for files. */
+enum linux_omode {
+ rdonly, wronly, rdwr, wronly_creat, rdwr_creat,
+ wronly_ssede, rdwr_ssede, dirent, dirent_creat
+};
+
+enum linux_seekmode {
+ absolute, relative
+};
+
+enum linux_mountops {
+ media_load, media_unload
+};
+
+/* This prom has a bolixed design. */
+struct linux_bigint {
+#ifdef __MIPSEL__
+ u32 lo;
+ s32 hi;
+#else /* !(__MIPSEL__) */
+ s32 hi;
+ u32 lo;
+#endif
+};
+
+struct linux_finfo {
+ struct linux_bigint begin;
+ struct linux_bigint end;
+ struct linux_bigint cur;
+ enum linux_devtypes dtype;
+ unsigned long namelen;
+ unsigned char attr;
+ char name[32]; /* XXX imperical, should be define */
+};
+
+/* This describes the vector containing function pointers to the ARC
+ firmware functions. */
+struct linux_romvec {
+ LONG load; /* Load an executable image. */
+ LONG invoke; /* Invoke a standalong image. */
+ LONG exec; /* Load and begin execution of a
+ standalone image. */
+ LONG halt; /* Halt the machine. */
+ LONG pdown; /* Power down the machine. */
+ LONG restart; /* XXX soft reset??? */
+ LONG reboot; /* Reboot the machine. */
+ LONG imode; /* Enter PROM interactive mode. */
+ LONG _unused1; /* Was ReturnFromMain(). */
+
+ /* PROM device tree interface. */
+ LONG next_component;
+ LONG child_component;
+ LONG parent_component;
+ LONG component_data;
+ LONG child_add;
+ LONG comp_del;
+ LONG component_by_path;
+
+ /* Misc. stuff. */
+ LONG cfg_save;
+ LONG get_sysid;
+
+ /* Probing for memory. */
+ LONG get_mdesc;
+ LONG _unused2; /* was Signal() */
+
+ LONG get_tinfo;
+ LONG get_rtime;
+
+ /* File type operations. */
+ LONG get_vdirent;
+ LONG open;
+ LONG close;
+ LONG read;
+ LONG get_rstatus;
+ LONG write;
+ LONG seek;
+ LONG mount;
+
+ /* Dealing with firmware environment variables. */
+ LONG get_evar;
+ LONG set_evar;
+
+ LONG get_finfo;
+ LONG set_finfo;
+
+ /* Miscellaneous. */
+ LONG cache_flush;
+ LONG TestUnicodeCharacter; /* ARC; not sure if ARCS too */
+ LONG GetDisplayStatus;
+};
+
+/* The SGI ARCS parameter block is in a fixed location for standalone
+ * programs to access PROM facilities easily.
+ */
+typedef struct _SYSTEM_PARAMETER_BLOCK {
+ ULONG magic; /* magic cookie */
+#define PROMBLOCK_MAGIC 0x53435241
+
+ ULONG len; /* length of parm block */
+ USHORT ver; /* ARCS firmware version */
+ USHORT rev; /* ARCS firmware revision */
+ _PLONG rs_block; /* Restart block. */
+ _PLONG dbg_block; /* Debug block. */
+ _PLONG gevect; /* XXX General vector??? */
+ _PLONG utlbvect; /* XXX UTLB vector??? */
+ ULONG rveclen; /* Size of romvec struct. */
+ _PVOID romvec; /* Function interface. */
+ ULONG pveclen; /* Length of private vector. */
+ _PVOID pvector; /* Private vector. */
+ ULONG adap_cnt; /* Adapter count. */
+ ULONG adap_typ0; /* First adapter type. */
+ ULONG adap_vcnt0; /* Adapter 0 vector count. */
+ _PVOID adap_vector; /* Adapter 0 vector ptr. */
+ ULONG adap_typ1; /* Second adapter type. */
+ ULONG adap_vcnt1; /* Adapter 1 vector count. */
+ _PVOID adap_vector1; /* Adapter 1 vector ptr. */
+ /* More adapter vectors go here... */
+} SYSTEM_PARAMETER_BLOCK, *PSYSTEM_PARAMETER_BLOCK;
+
+#define PROMBLOCK ((PSYSTEM_PARAMETER_BLOCK) (int)0xA0001000)
+#define ROMVECTOR ((struct linux_romvec *) (long)(PROMBLOCK)->romvec)
+
+/* Cache layout parameter block. */
+union linux_cache_key {
+ struct param {
+#ifdef __MIPSEL__
+ unsigned short size;
+ unsigned char lsize;
+ unsigned char bsize;
+#else /* !(__MIPSEL__) */
+ unsigned char bsize;
+ unsigned char lsize;
+ unsigned short size;
+#endif
+ } info;
+ unsigned long allinfo;
+};
+
+/* Configuration data. */
+struct linux_cdata {
+ char *name;
+ int mlen;
+ enum linux_devtypes type;
+};
+
+/* Common SGI ARCS firmware file descriptors. */
+#define SGIPROM_STDIN 0
+#define SGIPROM_STDOUT 1
+
+/* Common SGI ARCS firmware file types. */
+#define SGIPROM_ROFILE 0x01 /* read-only file */
+#define SGIPROM_HFILE 0x02 /* hidden file */
+#define SGIPROM_SFILE 0x04 /* System file */
+#define SGIPROM_AFILE 0x08 /* Archive file */
+#define SGIPROM_DFILE 0x10 /* Directory file */
+#define SGIPROM_DELFILE 0x20 /* Deleted file */
+
+/* SGI ARCS boot record information. */
+struct sgi_partition {
+ unsigned char flag;
+#define SGIPART_UNUSED 0x00
+#define SGIPART_ACTIVE 0x80
+
+ unsigned char shead, ssect, scyl; /* unused */
+ unsigned char systype; /* OS type, Irix or NT */
+ unsigned char ehead, esect, ecyl; /* unused */
+ unsigned char rsect0, rsect1, rsect2, rsect3;
+ unsigned char tsect0, tsect1, tsect2, tsect3;
+};
+
+#define SGIBBLOCK_MAGIC 0xaa55
+#define SGIBBLOCK_MAXPART 0x0004
+
+struct sgi_bootblock {
+ unsigned char _unused[446];
+ struct sgi_partition partitions[SGIBBLOCK_MAXPART];
+ unsigned short magic;
+};
+
+/* BIOS parameter block. */
+struct sgi_bparm_block {
+ unsigned short bytes_sect; /* bytes per sector */
+ unsigned char sect_clust; /* sectors per cluster */
+ unsigned short sect_resv; /* reserved sectors */
+ unsigned char nfats; /* # of allocation tables */
+ unsigned short nroot_dirents; /* # of root directory entries */
+ unsigned short sect_volume; /* sectors in volume */
+ unsigned char media_type; /* media descriptor */
+ unsigned short sect_fat; /* sectors per allocation table */
+ unsigned short sect_track; /* sectors per track */
+ unsigned short nheads; /* # of heads */
+ unsigned short nhsects; /* # of hidden sectors */
+};
+
+struct sgi_bsector {
+ unsigned char jmpinfo[3];
+ unsigned char manuf_name[8];
+ struct sgi_bparm_block info;
+};
+
+/* Debugging block used with SGI symmon symbolic debugger. */
+#define SMB_DEBUG_MAGIC 0xfeeddead
+struct linux_smonblock {
+ unsigned long magic;
+ void (*handler)(void); /* Breakpoint routine. */
+ unsigned long dtable_base; /* Base addr of dbg table. */
+ int (*printf)(const char *fmt, ...);
+ unsigned long btable_base; /* Breakpoint table. */
+ unsigned long mpflushreqs; /* SMP cache flush request list. */
+ unsigned long ntab; /* Name table. */
+ unsigned long stab; /* Symbol table. */
+ int smax; /* Max # of symbols. */
+};
+
+/*
+ * Macros for calling a 32-bit ARC implementation from 64-bit code
+ */
+
+#if defined(CONFIG_64BIT) && defined(CONFIG_ARC32)
+
+#define __arc_clobbers \
+ "$2", "$3" /* ... */, "$8", "$9", "$10", "$11", \
+ "$12", "$13", "$14", "$15", "$16", "$24", "$25", "$31"
+
+#define ARC_CALL0(dest) \
+({ long __res; \
+ long __vec = (long) romvec->dest; \
+ __asm__ __volatile__( \
+ "dsubu\t$29, 32\n\t" \
+ "jalr\t%1\n\t" \
+ "daddu\t$29, 32\n\t" \
+ "move\t%0, $2" \
+ : "=r" (__res), "=r" (__vec) \
+ : "1" (__vec) \
+ : __arc_clobbers, "$4", "$5", "$6", "$7"); \
+ (unsigned long) __res; \
+})
+
+#define ARC_CALL1(dest, a1) \
+({ long __res; \
+ register signed int __a1 __asm__("$4") = (int) (long) (a1); \
+ long __vec = (long) romvec->dest; \
+ __asm__ __volatile__( \
+ "dsubu\t$29, 32\n\t" \
+ "jalr\t%1\n\t" \
+ "daddu\t$29, 32\n\t" \
+ "move\t%0, $2" \
+ : "=r" (__res), "=r" (__vec) \
+ : "1" (__vec), "r" (__a1) \
+ : __arc_clobbers, "$5", "$6", "$7"); \
+ (unsigned long) __res; \
+})
+
+#define ARC_CALL2(dest, a1, a2) \
+({ long __res; \
+ register signed int __a1 __asm__("$4") = (int) (long) (a1); \
+ register signed int __a2 __asm__("$5") = (int) (long) (a2); \
+ long __vec = (long) romvec->dest; \
+ __asm__ __volatile__( \
+ "dsubu\t$29, 32\n\t" \
+ "jalr\t%1\n\t" \
+ "daddu\t$29, 32\n\t" \
+ "move\t%0, $2" \
+ : "=r" (__res), "=r" (__vec) \
+ : "1" (__vec), "r" (__a1), "r" (__a2) \
+ : __arc_clobbers, "$6", "$7"); \
+ __res; \
+})
+
+#define ARC_CALL3(dest, a1, a2, a3) \
+({ long __res; \
+ register signed int __a1 __asm__("$4") = (int) (long) (a1); \
+ register signed int __a2 __asm__("$5") = (int) (long) (a2); \
+ register signed int __a3 __asm__("$6") = (int) (long) (a3); \
+ long __vec = (long) romvec->dest; \
+ __asm__ __volatile__( \
+ "dsubu\t$29, 32\n\t" \
+ "jalr\t%1\n\t" \
+ "daddu\t$29, 32\n\t" \
+ "move\t%0, $2" \
+ : "=r" (__res), "=r" (__vec) \
+ : "1" (__vec), "r" (__a1), "r" (__a2), "r" (__a3) \
+ : __arc_clobbers, "$7"); \
+ __res; \
+})
+
+#define ARC_CALL4(dest, a1, a2, a3, a4) \
+({ long __res; \
+ register signed int __a1 __asm__("$4") = (int) (long) (a1); \
+ register signed int __a2 __asm__("$5") = (int) (long) (a2); \
+ register signed int __a3 __asm__("$6") = (int) (long) (a3); \
+ register signed int __a4 __asm__("$7") = (int) (long) (a4); \
+ long __vec = (long) romvec->dest; \
+ __asm__ __volatile__( \
+ "dsubu\t$29, 32\n\t" \
+ "jalr\t%1\n\t" \
+ "daddu\t$29, 32\n\t" \
+ "move\t%0, $2" \
+ : "=r" (__res), "=r" (__vec) \
+ : "1" (__vec), "r" (__a1), "r" (__a2), "r" (__a3), \
+ "r" (__a4) \
+ : __arc_clobbers); \
+ __res; \
+})
+
+#define ARC_CALL5(dest, a1, a2, a3, a4, a5) \
+({ long __res; \
+ register signed int __a1 __asm__("$4") = (int) (long) (a1); \
+ register signed int __a2 __asm__("$5") = (int) (long) (a2); \
+ register signed int __a3 __asm__("$6") = (int) (long) (a3); \
+ register signed int __a4 __asm__("$7") = (int) (long) (a4); \
+ register signed int __a5 = (int) (long) (a5); \
+ long __vec = (long) romvec->dest; \
+ __asm__ __volatile__( \
+ "dsubu\t$29, 32\n\t" \
+ "sw\t%7, 16($29)\n\t" \
+ "jalr\t%1\n\t" \
+ "daddu\t$29, 32\n\t" \
+ "move\t%0, $2" \
+ : "=r" (__res), "=r" (__vec) \
+ : "1" (__vec), \
+ "r" (__a1), "r" (__a2), "r" (__a3), "r" (__a4), \
+ "r" (__a5) \
+ : __arc_clobbers); \
+ __res; \
+})
+
+#endif /* defined(CONFIG_64BIT) && defined(CONFIG_ARC32) */
+
+#if (defined(CONFIG_32BIT) && defined(CONFIG_ARC32)) || \
+ (defined(CONFIG_64BIT) && defined(CONFIG_ARC64))
+
+#define ARC_CALL0(dest) \
+({ long __res; \
+ long (*__vec)(void) = (void *) romvec->dest; \
+ \
+ __res = __vec(); \
+ __res; \
+})
+
+#define ARC_CALL1(dest, a1) \
+({ long __res; \
+ long __a1 = (long) (a1); \
+ long (*__vec)(long) = (void *) romvec->dest; \
+ \
+ __res = __vec(__a1); \
+ __res; \
+})
+
+#define ARC_CALL2(dest, a1, a2) \
+({ long __res; \
+ long __a1 = (long) (a1); \
+ long __a2 = (long) (a2); \
+ long (*__vec)(long, long) = (void *) romvec->dest; \
+ \
+ __res = __vec(__a1, __a2); \
+ __res; \
+})
+
+#define ARC_CALL3(dest, a1, a2, a3) \
+({ long __res; \
+ long __a1 = (long) (a1); \
+ long __a2 = (long) (a2); \
+ long __a3 = (long) (a3); \
+ long (*__vec)(long, long, long) = (void *) romvec->dest; \
+ \
+ __res = __vec(__a1, __a2, __a3); \
+ __res; \
+})
+
+#define ARC_CALL4(dest, a1, a2, a3, a4) \
+({ long __res; \
+ long __a1 = (long) (a1); \
+ long __a2 = (long) (a2); \
+ long __a3 = (long) (a3); \
+ long __a4 = (long) (a4); \
+ long (*__vec)(long, long, long, long) = (void *) romvec->dest; \
+ \
+ __res = __vec(__a1, __a2, __a3, __a4); \
+ __res; \
+})
+
+#define ARC_CALL5(dest, a1, a2, a3, a4, a5) \
+({ long __res; \
+ long __a1 = (long) (a1); \
+ long __a2 = (long) (a2); \
+ long __a3 = (long) (a3); \
+ long __a4 = (long) (a4); \
+ long __a5 = (long) (a5); \
+ long (*__vec)(long, long, long, long, long); \
+ __vec = (void *) romvec->dest; \
+ \
+ __res = __vec(__a1, __a2, __a3, __a4, __a5); \
+ __res; \
+})
+#endif /* both kernel and ARC either 32-bit or 64-bit */
+
+#endif /* _ASM_SGIARCS_H */
diff --git a/arch/mips/include/asm/sgidefs.h b/arch/mips/include/asm/sgidefs.h
new file mode 100644
index 00000000000..876442fcfb3
--- /dev/null
+++ b/arch/mips/include/asm/sgidefs.h
@@ -0,0 +1,44 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1999, 2001 Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ */
+#ifndef __ASM_SGIDEFS_H
+#define __ASM_SGIDEFS_H
+
+/*
+ * Using a Linux compiler for building Linux seems logic but not to
+ * everybody.
+ */
+#ifndef __linux__
+#error Use a Linux compiler or give up.
+#endif
+
+/*
+ * Definitions for the ISA levels
+ *
+ * With the introduction of MIPS32 / MIPS64 instruction sets definitions
+ * MIPS ISAs are no longer subsets of each other. Therefore comparisons
+ * on these symbols except with == may result in unexpected results and
+ * are forbidden!
+ */
+#define _MIPS_ISA_MIPS1 1
+#define _MIPS_ISA_MIPS2 2
+#define _MIPS_ISA_MIPS3 3
+#define _MIPS_ISA_MIPS4 4
+#define _MIPS_ISA_MIPS5 5
+#define _MIPS_ISA_MIPS32 6
+#define _MIPS_ISA_MIPS64 7
+
+/*
+ * Subprogram calling convention
+ */
+#define _MIPS_SIM_ABI32 1
+#define _MIPS_SIM_NABI32 2
+#define _MIPS_SIM_ABI64 3
+
+#endif /* __ASM_SGIDEFS_H */
diff --git a/arch/mips/include/asm/shmbuf.h b/arch/mips/include/asm/shmbuf.h
new file mode 100644
index 00000000000..f994438277b
--- /dev/null
+++ b/arch/mips/include/asm/shmbuf.h
@@ -0,0 +1,38 @@
+#ifndef _ASM_SHMBUF_H
+#define _ASM_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for the MIPS architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 32-bit rsp. 64-bit values
+ */
+
+struct shmid64_ds {
+ struct ipc64_perm shm_perm; /* operation perms */
+ size_t shm_segsz; /* size of segment (bytes) */
+ __kernel_time_t shm_atime; /* last attach time */
+ __kernel_time_t shm_dtime; /* last detach time */
+ __kernel_time_t shm_ctime; /* last change time */
+ __kernel_pid_t shm_cpid; /* pid of creator */
+ __kernel_pid_t shm_lpid; /* pid of last operator */
+ unsigned long shm_nattch; /* no. of current attaches */
+ unsigned long __unused1;
+ unsigned long __unused2;
+};
+
+struct shminfo64 {
+ unsigned long shmmax;
+ unsigned long shmmin;
+ unsigned long shmmni;
+ unsigned long shmseg;
+ unsigned long shmall;
+ unsigned long __unused1;
+ unsigned long __unused2;
+ unsigned long __unused3;
+ unsigned long __unused4;
+};
+
+#endif /* _ASM_SHMBUF_H */
diff --git a/arch/mips/include/asm/shmparam.h b/arch/mips/include/asm/shmparam.h
new file mode 100644
index 00000000000..09290720751
--- /dev/null
+++ b/arch/mips/include/asm/shmparam.h
@@ -0,0 +1,13 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef _ASM_SHMPARAM_H
+#define _ASM_SHMPARAM_H
+
+#define __ARCH_FORCE_SHMLBA 1
+
+#define SHMLBA 0x40000 /* attach addr a multiple of this */
+
+#endif /* _ASM_SHMPARAM_H */
diff --git a/arch/mips/include/asm/sibyte/bcm1480_int.h b/arch/mips/include/asm/sibyte/bcm1480_int.h
new file mode 100644
index 00000000000..6109557c14e
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/bcm1480_int.h
@@ -0,0 +1,312 @@
+/* *********************************************************************
+ * BCM1280/BCM1480 Board Support Package
+ *
+ * Interrupt Mapper definitions File: bcm1480_int.h
+ *
+ * This module contains constants for manipulating the
+ * BCM1255/BCM1280/BCM1455/BCM1480's interrupt mapper and
+ * definitions for the interrupt sources.
+ *
+ * BCM1480 specification level: 1X55_1X80-UM100-D4 (11/24/03)
+ *
+ *********************************************************************
+ *
+ * Copyright 2000,2001,2002,2003
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+
+#ifndef _BCM1480_INT_H
+#define _BCM1480_INT_H
+
+#include "sb1250_defs.h"
+
+/* *********************************************************************
+ * Interrupt Mapper Constants
+ ********************************************************************* */
+
+/*
+ * The interrupt mapper deals with 128-bit logical registers that are
+ * implemented as pairs of 64-bit registers, with the "low" 64 bits in
+ * a register that has an address 0x1000 higher(!) than the
+ * corresponding "high" register.
+ *
+ * For appropriate registers, bit 0 of the "high" register is a
+ * cascade bit that summarizes (as a bit-OR) the 64 bits of the "low"
+ * register.
+ */
+
+/*
+ * This entire file uses _BCM1480_ in all the symbols because it is
+ * entirely BCM1480 specific.
+ */
+
+/*
+ * Interrupt sources (Table 22)
+ */
+
+#define K_BCM1480_INT_SOURCES 128
+
+#define _BCM1480_INT_HIGH(k) (k)
+#define _BCM1480_INT_LOW(k) ((k)+64)
+
+#define K_BCM1480_INT_ADDR_TRAP _BCM1480_INT_HIGH(1)
+#define K_BCM1480_INT_GPIO_0 _BCM1480_INT_HIGH(4)
+#define K_BCM1480_INT_GPIO_1 _BCM1480_INT_HIGH(5)
+#define K_BCM1480_INT_GPIO_2 _BCM1480_INT_HIGH(6)
+#define K_BCM1480_INT_GPIO_3 _BCM1480_INT_HIGH(7)
+#define K_BCM1480_INT_PCI_INTA _BCM1480_INT_HIGH(8)
+#define K_BCM1480_INT_PCI_INTB _BCM1480_INT_HIGH(9)
+#define K_BCM1480_INT_PCI_INTC _BCM1480_INT_HIGH(10)
+#define K_BCM1480_INT_PCI_INTD _BCM1480_INT_HIGH(11)
+#define K_BCM1480_INT_CYCLE_CP0 _BCM1480_INT_HIGH(12)
+#define K_BCM1480_INT_CYCLE_CP1 _BCM1480_INT_HIGH(13)
+#define K_BCM1480_INT_CYCLE_CP2 _BCM1480_INT_HIGH(14)
+#define K_BCM1480_INT_CYCLE_CP3 _BCM1480_INT_HIGH(15)
+#define K_BCM1480_INT_TIMER_0 _BCM1480_INT_HIGH(20)
+#define K_BCM1480_INT_TIMER_1 _BCM1480_INT_HIGH(21)
+#define K_BCM1480_INT_TIMER_2 _BCM1480_INT_HIGH(22)
+#define K_BCM1480_INT_TIMER_3 _BCM1480_INT_HIGH(23)
+#define K_BCM1480_INT_DM_CH_0 _BCM1480_INT_HIGH(28)
+#define K_BCM1480_INT_DM_CH_1 _BCM1480_INT_HIGH(29)
+#define K_BCM1480_INT_DM_CH_2 _BCM1480_INT_HIGH(30)
+#define K_BCM1480_INT_DM_CH_3 _BCM1480_INT_HIGH(31)
+#define K_BCM1480_INT_MAC_0 _BCM1480_INT_HIGH(36)
+#define K_BCM1480_INT_MAC_0_CH1 _BCM1480_INT_HIGH(37)
+#define K_BCM1480_INT_MAC_1 _BCM1480_INT_HIGH(38)
+#define K_BCM1480_INT_MAC_1_CH1 _BCM1480_INT_HIGH(39)
+#define K_BCM1480_INT_MAC_2 _BCM1480_INT_HIGH(40)
+#define K_BCM1480_INT_MAC_2_CH1 _BCM1480_INT_HIGH(41)
+#define K_BCM1480_INT_MAC_3 _BCM1480_INT_HIGH(42)
+#define K_BCM1480_INT_MAC_3_CH1 _BCM1480_INT_HIGH(43)
+#define K_BCM1480_INT_PMI_LOW _BCM1480_INT_HIGH(52)
+#define K_BCM1480_INT_PMI_HIGH _BCM1480_INT_HIGH(53)
+#define K_BCM1480_INT_PMO_LOW _BCM1480_INT_HIGH(54)
+#define K_BCM1480_INT_PMO_HIGH _BCM1480_INT_HIGH(55)
+#define K_BCM1480_INT_MBOX_0_0 _BCM1480_INT_HIGH(56)
+#define K_BCM1480_INT_MBOX_0_1 _BCM1480_INT_HIGH(57)
+#define K_BCM1480_INT_MBOX_0_2 _BCM1480_INT_HIGH(58)
+#define K_BCM1480_INT_MBOX_0_3 _BCM1480_INT_HIGH(59)
+#define K_BCM1480_INT_MBOX_1_0 _BCM1480_INT_HIGH(60)
+#define K_BCM1480_INT_MBOX_1_1 _BCM1480_INT_HIGH(61)
+#define K_BCM1480_INT_MBOX_1_2 _BCM1480_INT_HIGH(62)
+#define K_BCM1480_INT_MBOX_1_3 _BCM1480_INT_HIGH(63)
+
+#define K_BCM1480_INT_BAD_ECC _BCM1480_INT_LOW(1)
+#define K_BCM1480_INT_COR_ECC _BCM1480_INT_LOW(2)
+#define K_BCM1480_INT_IO_BUS _BCM1480_INT_LOW(3)
+#define K_BCM1480_INT_PERF_CNT _BCM1480_INT_LOW(4)
+#define K_BCM1480_INT_SW_PERF_CNT _BCM1480_INT_LOW(5)
+#define K_BCM1480_INT_TRACE_FREEZE _BCM1480_INT_LOW(6)
+#define K_BCM1480_INT_SW_TRACE_FREEZE _BCM1480_INT_LOW(7)
+#define K_BCM1480_INT_WATCHDOG_TIMER_0 _BCM1480_INT_LOW(8)
+#define K_BCM1480_INT_WATCHDOG_TIMER_1 _BCM1480_INT_LOW(9)
+#define K_BCM1480_INT_WATCHDOG_TIMER_2 _BCM1480_INT_LOW(10)
+#define K_BCM1480_INT_WATCHDOG_TIMER_3 _BCM1480_INT_LOW(11)
+#define K_BCM1480_INT_PCI_ERROR _BCM1480_INT_LOW(16)
+#define K_BCM1480_INT_PCI_RESET _BCM1480_INT_LOW(17)
+#define K_BCM1480_INT_NODE_CONTROLLER _BCM1480_INT_LOW(18)
+#define K_BCM1480_INT_HOST_BRIDGE _BCM1480_INT_LOW(19)
+#define K_BCM1480_INT_PORT_0_FATAL _BCM1480_INT_LOW(20)
+#define K_BCM1480_INT_PORT_0_NONFATAL _BCM1480_INT_LOW(21)
+#define K_BCM1480_INT_PORT_1_FATAL _BCM1480_INT_LOW(22)
+#define K_BCM1480_INT_PORT_1_NONFATAL _BCM1480_INT_LOW(23)
+#define K_BCM1480_INT_PORT_2_FATAL _BCM1480_INT_LOW(24)
+#define K_BCM1480_INT_PORT_2_NONFATAL _BCM1480_INT_LOW(25)
+#define K_BCM1480_INT_LDT_SMI _BCM1480_INT_LOW(32)
+#define K_BCM1480_INT_LDT_NMI _BCM1480_INT_LOW(33)
+#define K_BCM1480_INT_LDT_INIT _BCM1480_INT_LOW(34)
+#define K_BCM1480_INT_LDT_STARTUP _BCM1480_INT_LOW(35)
+#define K_BCM1480_INT_LDT_EXT _BCM1480_INT_LOW(36)
+#define K_BCM1480_INT_SMB_0 _BCM1480_INT_LOW(40)
+#define K_BCM1480_INT_SMB_1 _BCM1480_INT_LOW(41)
+#define K_BCM1480_INT_PCMCIA _BCM1480_INT_LOW(42)
+#define K_BCM1480_INT_UART_0 _BCM1480_INT_LOW(44)
+#define K_BCM1480_INT_UART_1 _BCM1480_INT_LOW(45)
+#define K_BCM1480_INT_UART_2 _BCM1480_INT_LOW(46)
+#define K_BCM1480_INT_UART_3 _BCM1480_INT_LOW(47)
+#define K_BCM1480_INT_GPIO_4 _BCM1480_INT_LOW(52)
+#define K_BCM1480_INT_GPIO_5 _BCM1480_INT_LOW(53)
+#define K_BCM1480_INT_GPIO_6 _BCM1480_INT_LOW(54)
+#define K_BCM1480_INT_GPIO_7 _BCM1480_INT_LOW(55)
+#define K_BCM1480_INT_GPIO_8 _BCM1480_INT_LOW(56)
+#define K_BCM1480_INT_GPIO_9 _BCM1480_INT_LOW(57)
+#define K_BCM1480_INT_GPIO_10 _BCM1480_INT_LOW(58)
+#define K_BCM1480_INT_GPIO_11 _BCM1480_INT_LOW(59)
+#define K_BCM1480_INT_GPIO_12 _BCM1480_INT_LOW(60)
+#define K_BCM1480_INT_GPIO_13 _BCM1480_INT_LOW(61)
+#define K_BCM1480_INT_GPIO_14 _BCM1480_INT_LOW(62)
+#define K_BCM1480_INT_GPIO_15 _BCM1480_INT_LOW(63)
+
+/*
+ * Mask values for each interrupt
+ */
+
+#define _BCM1480_INT_MASK(w, n) _SB_MAKEMASK(w, ((n) & 0x3F))
+#define _BCM1480_INT_MASK1(n) _SB_MAKEMASK1(((n) & 0x3F))
+#define _BCM1480_INT_OFFSET(n) (((n) & 0x40) << 6)
+
+#define M_BCM1480_INT_CASCADE _BCM1480_INT_MASK1(_BCM1480_INT_HIGH(0))
+
+#define M_BCM1480_INT_ADDR_TRAP _BCM1480_INT_MASK1(K_BCM1480_INT_ADDR_TRAP)
+#define M_BCM1480_INT_GPIO_0 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_0)
+#define M_BCM1480_INT_GPIO_1 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_1)
+#define M_BCM1480_INT_GPIO_2 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_2)
+#define M_BCM1480_INT_GPIO_3 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_3)
+#define M_BCM1480_INT_PCI_INTA _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTA)
+#define M_BCM1480_INT_PCI_INTB _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTB)
+#define M_BCM1480_INT_PCI_INTC _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTC)
+#define M_BCM1480_INT_PCI_INTD _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTD)
+#define M_BCM1480_INT_CYCLE_CP0 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP0)
+#define M_BCM1480_INT_CYCLE_CP1 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP1)
+#define M_BCM1480_INT_CYCLE_CP2 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP2)
+#define M_BCM1480_INT_CYCLE_CP3 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP3)
+#define M_BCM1480_INT_TIMER_0 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_0)
+#define M_BCM1480_INT_TIMER_1 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_1)
+#define M_BCM1480_INT_TIMER_2 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_2)
+#define M_BCM1480_INT_TIMER_3 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_3)
+#define M_BCM1480_INT_DM_CH_0 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_0)
+#define M_BCM1480_INT_DM_CH_1 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_1)
+#define M_BCM1480_INT_DM_CH_2 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_2)
+#define M_BCM1480_INT_DM_CH_3 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_3)
+#define M_BCM1480_INT_MAC_0 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_0)
+#define M_BCM1480_INT_MAC_0_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_0_CH1)
+#define M_BCM1480_INT_MAC_1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_1)
+#define M_BCM1480_INT_MAC_1_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_1_CH1)
+#define M_BCM1480_INT_MAC_2 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_2)
+#define M_BCM1480_INT_MAC_2_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_2_CH1)
+#define M_BCM1480_INT_MAC_3 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_3)
+#define M_BCM1480_INT_MAC_3_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_3_CH1)
+#define M_BCM1480_INT_PMI_LOW _BCM1480_INT_MASK1(K_BCM1480_INT_PMI_LOW)
+#define M_BCM1480_INT_PMI_HIGH _BCM1480_INT_MASK1(K_BCM1480_INT_PMI_HIGH)
+#define M_BCM1480_INT_PMO_LOW _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_LOW)
+#define M_BCM1480_INT_PMO_HIGH _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_HIGH)
+#define M_BCM1480_INT_MBOX_ALL _BCM1480_INT_MASK(8, K_BCM1480_INT_MBOX_0_0)
+#define M_BCM1480_INT_MBOX_0_0 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_0)
+#define M_BCM1480_INT_MBOX_0_1 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_1)
+#define M_BCM1480_INT_MBOX_0_2 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_2)
+#define M_BCM1480_INT_MBOX_0_3 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_3)
+#define M_BCM1480_INT_MBOX_1_0 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_0)
+#define M_BCM1480_INT_MBOX_1_1 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_1)
+#define M_BCM1480_INT_MBOX_1_2 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_2)
+#define M_BCM1480_INT_MBOX_1_3 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_3)
+#define M_BCM1480_INT_BAD_ECC _BCM1480_INT_MASK1(K_BCM1480_INT_BAD_ECC)
+#define M_BCM1480_INT_COR_ECC _BCM1480_INT_MASK1(K_BCM1480_INT_COR_ECC)
+#define M_BCM1480_INT_IO_BUS _BCM1480_INT_MASK1(K_BCM1480_INT_IO_BUS)
+#define M_BCM1480_INT_PERF_CNT _BCM1480_INT_MASK1(K_BCM1480_INT_PERF_CNT)
+#define M_BCM1480_INT_SW_PERF_CNT _BCM1480_INT_MASK1(K_BCM1480_INT_SW_PERF_CNT)
+#define M_BCM1480_INT_TRACE_FREEZE _BCM1480_INT_MASK1(K_BCM1480_INT_TRACE_FREEZE)
+#define M_BCM1480_INT_SW_TRACE_FREEZE _BCM1480_INT_MASK1(K_BCM1480_INT_SW_TRACE_FREEZE)
+#define M_BCM1480_INT_WATCHDOG_TIMER_0 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_0)
+#define M_BCM1480_INT_WATCHDOG_TIMER_1 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_1)
+#define M_BCM1480_INT_WATCHDOG_TIMER_2 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_2)
+#define M_BCM1480_INT_WATCHDOG_TIMER_3 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_3)
+#define M_BCM1480_INT_PCI_ERROR _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_ERROR)
+#define M_BCM1480_INT_PCI_RESET _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_RESET)
+#define M_BCM1480_INT_NODE_CONTROLLER _BCM1480_INT_MASK1(K_BCM1480_INT_NODE_CONTROLLER)
+#define M_BCM1480_INT_HOST_BRIDGE _BCM1480_INT_MASK1(K_BCM1480_INT_HOST_BRIDGE)
+#define M_BCM1480_INT_PORT_0_FATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_0_FATAL)
+#define M_BCM1480_INT_PORT_0_NONFATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_0_NONFATAL)
+#define M_BCM1480_INT_PORT_1_FATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_1_FATAL)
+#define M_BCM1480_INT_PORT_1_NONFATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_1_NONFATAL)
+#define M_BCM1480_INT_PORT_2_FATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_2_FATAL)
+#define M_BCM1480_INT_PORT_2_NONFATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_2_NONFATAL)
+#define M_BCM1480_INT_LDT_SMI _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_SMI)
+#define M_BCM1480_INT_LDT_NMI _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_NMI)
+#define M_BCM1480_INT_LDT_INIT _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_INIT)
+#define M_BCM1480_INT_LDT_STARTUP _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_STARTUP)
+#define M_BCM1480_INT_LDT_EXT _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_EXT)
+#define M_BCM1480_INT_SMB_0 _BCM1480_INT_MASK1(K_BCM1480_INT_SMB_0)
+#define M_BCM1480_INT_SMB_1 _BCM1480_INT_MASK1(K_BCM1480_INT_SMB_1)
+#define M_BCM1480_INT_PCMCIA _BCM1480_INT_MASK1(K_BCM1480_INT_PCMCIA)
+#define M_BCM1480_INT_UART_0 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_0)
+#define M_BCM1480_INT_UART_1 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_1)
+#define M_BCM1480_INT_UART_2 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_2)
+#define M_BCM1480_INT_UART_3 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_3)
+#define M_BCM1480_INT_GPIO_4 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_4)
+#define M_BCM1480_INT_GPIO_5 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_5)
+#define M_BCM1480_INT_GPIO_6 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_6)
+#define M_BCM1480_INT_GPIO_7 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_7)
+#define M_BCM1480_INT_GPIO_8 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_8)
+#define M_BCM1480_INT_GPIO_9 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_9)
+#define M_BCM1480_INT_GPIO_10 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_10)
+#define M_BCM1480_INT_GPIO_11 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_11)
+#define M_BCM1480_INT_GPIO_12 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_12)
+#define M_BCM1480_INT_GPIO_13 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_13)
+#define M_BCM1480_INT_GPIO_14 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_14)
+#define M_BCM1480_INT_GPIO_15 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_15)
+
+/*
+ * Interrupt mappings (Table 18)
+ */
+
+#define K_BCM1480_INT_MAP_I0 0 /* interrupt pins on processor */
+#define K_BCM1480_INT_MAP_I1 1
+#define K_BCM1480_INT_MAP_I2 2
+#define K_BCM1480_INT_MAP_I3 3
+#define K_BCM1480_INT_MAP_I4 4
+#define K_BCM1480_INT_MAP_I5 5
+#define K_BCM1480_INT_MAP_NMI 6 /* nonmaskable */
+#define K_BCM1480_INT_MAP_DINT 7 /* debug interrupt */
+
+/*
+ * Interrupt LDT Set Register (Table 19)
+ */
+
+#define S_BCM1480_INT_HT_INTMSG 0
+#define M_BCM1480_INT_HT_INTMSG _SB_MAKEMASK(3, S_BCM1480_INT_HT_INTMSG)
+#define V_BCM1480_INT_HT_INTMSG(x) _SB_MAKEVALUE(x, S_BCM1480_INT_HT_INTMSG)
+#define G_BCM1480_INT_HT_INTMSG(x) _SB_GETVALUE(x, S_BCM1480_INT_HT_INTMSG, M_BCM1480_INT_HT_INTMSG)
+
+#define K_BCM1480_INT_HT_INTMSG_FIXED 0
+#define K_BCM1480_INT_HT_INTMSG_ARBITRATED 1
+#define K_BCM1480_INT_HT_INTMSG_SMI 2
+#define K_BCM1480_INT_HT_INTMSG_NMI 3
+#define K_BCM1480_INT_HT_INTMSG_INIT 4
+#define K_BCM1480_INT_HT_INTMSG_STARTUP 5
+#define K_BCM1480_INT_HT_INTMSG_EXTINT 6
+#define K_BCM1480_INT_HT_INTMSG_RESERVED 7
+
+#define M_BCM1480_INT_HT_TRIGGERMODE _SB_MAKEMASK1(3)
+#define V_BCM1480_INT_HT_EDGETRIGGER 0
+#define V_BCM1480_INT_HT_LEVELTRIGGER M_BCM1480_INT_HT_TRIGGERMODE
+
+#define M_BCM1480_INT_HT_DESTMODE _SB_MAKEMASK1(4)
+#define V_BCM1480_INT_HT_PHYSICALDEST 0
+#define V_BCM1480_INT_HT_LOGICALDEST M_BCM1480_INT_HT_DESTMODE
+
+#define S_BCM1480_INT_HT_INTDEST 5
+#define M_BCM1480_INT_HT_INTDEST _SB_MAKEMASK(8, S_BCM1480_INT_HT_INTDEST)
+#define V_BCM1480_INT_HT_INTDEST(x) _SB_MAKEVALUE(x, S_BCM1480_INT_HT_INTDEST)
+#define G_BCM1480_INT_HT_INTDEST(x) _SB_GETVALUE(x, S_BCM1480_INT_HT_INTDEST, M_BCM1480_INT_HT_INTDEST)
+
+#define S_BCM1480_INT_HT_VECTOR 13
+#define M_BCM1480_INT_HT_VECTOR _SB_MAKEMASK(8, S_BCM1480_INT_HT_VECTOR)
+#define V_BCM1480_INT_HT_VECTOR(x) _SB_MAKEVALUE(x, S_BCM1480_INT_HT_VECTOR)
+#define G_BCM1480_INT_HT_VECTOR(x) _SB_GETVALUE(x, S_BCM1480_INT_HT_VECTOR, M_BCM1480_INT_HT_VECTOR)
+
+/*
+ * Vector prefix (Table 4-7)
+ */
+
+#define M_BCM1480_HTVECT_RAISE_INTLDT_HIGH 0x00
+#define M_BCM1480_HTVECT_RAISE_MBOX_0 0x40
+#define M_BCM1480_HTVECT_RAISE_INTLDT_LO 0x80
+#define M_BCM1480_HTVECT_RAISE_MBOX_1 0xC0
+
+#endif /* _BCM1480_INT_H */
diff --git a/arch/mips/include/asm/sibyte/bcm1480_l2c.h b/arch/mips/include/asm/sibyte/bcm1480_l2c.h
new file mode 100644
index 00000000000..fd75817f7ac
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/bcm1480_l2c.h
@@ -0,0 +1,176 @@
+/* *********************************************************************
+ * BCM1280/BCM1480 Board Support Package
+ *
+ * L2 Cache constants and macros File: bcm1480_l2c.h
+ *
+ * This module contains constants useful for manipulating the
+ * level 2 cache.
+ *
+ * BCM1400 specification level: 1280-UM100-D2 (11/14/03)
+ *
+ *********************************************************************
+ *
+ * Copyright 2000,2001,2002,2003
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+
+#ifndef _BCM1480_L2C_H
+#define _BCM1480_L2C_H
+
+#include "sb1250_defs.h"
+
+/*
+ * Format of level 2 cache management address (Table 55)
+ */
+
+#define S_BCM1480_L2C_MGMT_INDEX 5
+#define M_BCM1480_L2C_MGMT_INDEX _SB_MAKEMASK(12, S_BCM1480_L2C_MGMT_INDEX)
+#define V_BCM1480_L2C_MGMT_INDEX(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_MGMT_INDEX)
+#define G_BCM1480_L2C_MGMT_INDEX(x) _SB_GETVALUE(x, S_BCM1480_L2C_MGMT_INDEX, M_BCM1480_L2C_MGMT_INDEX)
+
+#define S_BCM1480_L2C_MGMT_WAY 17
+#define M_BCM1480_L2C_MGMT_WAY _SB_MAKEMASK(3, S_BCM1480_L2C_MGMT_WAY)
+#define V_BCM1480_L2C_MGMT_WAY(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_MGMT_WAY)
+#define G_BCM1480_L2C_MGMT_WAY(x) _SB_GETVALUE(x, S_BCM1480_L2C_MGMT_WAY, M_BCM1480_L2C_MGMT_WAY)
+
+#define M_BCM1480_L2C_MGMT_DIRTY _SB_MAKEMASK1(20)
+#define M_BCM1480_L2C_MGMT_VALID _SB_MAKEMASK1(21)
+
+#define S_BCM1480_L2C_MGMT_ECC_DIAG 22
+#define M_BCM1480_L2C_MGMT_ECC_DIAG _SB_MAKEMASK(2, S_BCM1480_L2C_MGMT_ECC_DIAG)
+#define V_BCM1480_L2C_MGMT_ECC_DIAG(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_MGMT_ECC_DIAG)
+#define G_BCM1480_L2C_MGMT_ECC_DIAG(x) _SB_GETVALUE(x, S_BCM1480_L2C_MGMT_ECC_DIAG, M_BCM1480_L2C_MGMT_ECC_DIAG)
+
+#define A_BCM1480_L2C_MGMT_TAG_BASE 0x00D0000000
+
+#define BCM1480_L2C_ENTRIES_PER_WAY 4096
+#define BCM1480_L2C_NUM_WAYS 8
+
+
+/*
+ * Level 2 Cache Tag register (Table 59)
+ */
+
+#define S_BCM1480_L2C_TAG_MBZ 0
+#define M_BCM1480_L2C_TAG_MBZ _SB_MAKEMASK(5, S_BCM1480_L2C_TAG_MBZ)
+
+#define S_BCM1480_L2C_TAG_INDEX 5
+#define M_BCM1480_L2C_TAG_INDEX _SB_MAKEMASK(12, S_BCM1480_L2C_TAG_INDEX)
+#define V_BCM1480_L2C_TAG_INDEX(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_INDEX)
+#define G_BCM1480_L2C_TAG_INDEX(x) _SB_GETVALUE(x, S_BCM1480_L2C_TAG_INDEX, M_BCM1480_L2C_TAG_INDEX)
+
+/* Note that index bit 16 is also tag bit 40 */
+#define S_BCM1480_L2C_TAG_TAG 17
+#define M_BCM1480_L2C_TAG_TAG _SB_MAKEMASK(23, S_BCM1480_L2C_TAG_TAG)
+#define V_BCM1480_L2C_TAG_TAG(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_TAG)
+#define G_BCM1480_L2C_TAG_TAG(x) _SB_GETVALUE(x, S_BCM1480_L2C_TAG_TAG, M_BCM1480_L2C_TAG_TAG)
+
+#define S_BCM1480_L2C_TAG_ECC 40
+#define M_BCM1480_L2C_TAG_ECC _SB_MAKEMASK(6, S_BCM1480_L2C_TAG_ECC)
+#define V_BCM1480_L2C_TAG_ECC(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_ECC)
+#define G_BCM1480_L2C_TAG_ECC(x) _SB_GETVALUE(x, S_BCM1480_L2C_TAG_ECC, M_BCM1480_L2C_TAG_ECC)
+
+#define S_BCM1480_L2C_TAG_WAY 46
+#define M_BCM1480_L2C_TAG_WAY _SB_MAKEMASK(3, S_BCM1480_L2C_TAG_WAY)
+#define V_BCM1480_L2C_TAG_WAY(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_TAG_WAY)
+#define G_BCM1480_L2C_TAG_WAY(x) _SB_GETVALUE(x, S_BCM1480_L2C_TAG_WAY, M_BCM1480_L2C_TAG_WAY)
+
+#define M_BCM1480_L2C_TAG_DIRTY _SB_MAKEMASK1(49)
+#define M_BCM1480_L2C_TAG_VALID _SB_MAKEMASK1(50)
+
+#define S_BCM1480_L2C_DATA_ECC 51
+#define M_BCM1480_L2C_DATA_ECC _SB_MAKEMASK(10, S_BCM1480_L2C_DATA_ECC)
+#define V_BCM1480_L2C_DATA_ECC(x) _SB_MAKEVALUE(x, S_BCM1480_L2C_DATA_ECC)
+#define G_BCM1480_L2C_DATA_ECC(x) _SB_GETVALUE(x, S_BCM1480_L2C_DATA_ECC, M_BCM1480_L2C_DATA_ECC)
+
+
+/*
+ * L2 Misc0 Value Register (Table 60)
+ */
+
+#define S_BCM1480_L2C_MISC0_WAY_REMOTE 0
+#define M_BCM1480_L2C_MISC0_WAY_REMOTE _SB_MAKEMASK(8, S_BCM1480_L2C_MISC0_WAY_REMOTE)
+#define G_BCM1480_L2C_MISC0_WAY_REMOTE(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_WAY_REMOTE, M_BCM1480_L2C_MISC0_WAY_REMOTE)
+
+#define S_BCM1480_L2C_MISC0_WAY_LOCAL 8
+#define M_BCM1480_L2C_MISC0_WAY_LOCAL _SB_MAKEMASK(8, S_BCM1480_L2C_MISC0_WAY_LOCAL)
+#define G_BCM1480_L2C_MISC0_WAY_LOCAL(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_WAY_LOCAL, M_BCM1480_L2C_MISC0_WAY_LOCAL)
+
+#define S_BCM1480_L2C_MISC0_WAY_ENABLE 16
+#define M_BCM1480_L2C_MISC0_WAY_ENABLE _SB_MAKEMASK(8, S_BCM1480_L2C_MISC0_WAY_ENABLE)
+#define G_BCM1480_L2C_MISC0_WAY_ENABLE(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_WAY_ENABLE, M_BCM1480_L2C_MISC0_WAY_ENABLE)
+
+#define S_BCM1480_L2C_MISC0_CACHE_DISABLE 24
+#define M_BCM1480_L2C_MISC0_CACHE_DISABLE _SB_MAKEMASK(2, S_BCM1480_L2C_MISC0_CACHE_DISABLE)
+#define G_BCM1480_L2C_MISC0_CACHE_DISABLE(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_CACHE_DISABLE, M_BCM1480_L2C_MISC0_CACHE_DISABLE)
+
+#define S_BCM1480_L2C_MISC0_CACHE_QUAD 26
+#define M_BCM1480_L2C_MISC0_CACHE_QUAD _SB_MAKEMASK(2, S_BCM1480_L2C_MISC0_CACHE_QUAD)
+#define G_BCM1480_L2C_MISC0_CACHE_QUAD(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC0_CACHE_QUAD, M_BCM1480_L2C_MISC0_CACHE_QUAD)
+
+#define S_BCM1480_L2C_MISC0_MC_PRIORITY 30
+#define M_BCM1480_L2C_MISC0_MC_PRIORITY _SB_MAKEMASK1(S_BCM1480_L2C_MISC0_MC_PRIORITY)
+
+#define S_BCM1480_L2C_MISC0_ECC_CLEANUP 31
+#define M_BCM1480_L2C_MISC0_ECC_CLEANUP _SB_MAKEMASK1(S_BCM1480_L2C_MISC0_ECC_CLEANUP)
+
+
+/*
+ * L2 Misc1 Value Register (Table 60)
+ */
+
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_0 0
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_0 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_0)
+#define G_BCM1480_L2C_MISC1_WAY_AGENT_0(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_0, M_BCM1480_L2C_MISC1_WAY_AGENT_0)
+
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_1 8
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_1 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_1)
+#define G_BCM1480_L2C_MISC1_WAY_AGENT_1(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_1, M_BCM1480_L2C_MISC1_WAY_AGENT_1)
+
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_2 16
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_2 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_2)
+#define G_BCM1480_L2C_MISC1_WAY_AGENT_2(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_2, M_BCM1480_L2C_MISC1_WAY_AGENT_2)
+
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_3 24
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_3 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_3)
+#define G_BCM1480_L2C_MISC1_WAY_AGENT_3(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_3, M_BCM1480_L2C_MISC1_WAY_AGENT_3)
+
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_4 32
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_4 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC1_WAY_AGENT_4)
+#define G_BCM1480_L2C_MISC1_WAY_AGENT_4(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC1_WAY_AGENT_4, M_BCM1480_L2C_MISC1_WAY_AGENT_4)
+
+
+/*
+ * L2 Misc2 Value Register (Table 60)
+ */
+
+#define S_BCM1480_L2C_MISC2_WAY_AGENT_8 0
+#define M_BCM1480_L2C_MISC2_WAY_AGENT_8 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC2_WAY_AGENT_8)
+#define G_BCM1480_L2C_MISC2_WAY_AGENT_8(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC2_WAY_AGENT_8, M_BCM1480_L2C_MISC2_WAY_AGENT_8)
+
+#define S_BCM1480_L2C_MISC2_WAY_AGENT_9 8
+#define M_BCM1480_L2C_MISC2_WAY_AGENT_9 _SB_MAKEMASK(8, S_BCM1480_L2C_MISC2_WAY_AGENT_9)
+#define G_BCM1480_L2C_MISC2_WAY_AGENT_9(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC2_WAY_AGENT_9, M_BCM1480_L2C_MISC2_WAY_AGENT_9)
+
+#define S_BCM1480_L2C_MISC2_WAY_AGENT_A 16
+#define M_BCM1480_L2C_MISC2_WAY_AGENT_A _SB_MAKEMASK(8, S_BCM1480_L2C_MISC2_WAY_AGENT_A)
+#define G_BCM1480_L2C_MISC2_WAY_AGENT_A(x) _SB_GETVALUE(x, S_BCM1480_L2C_MISC2_WAY_AGENT_A, M_BCM1480_L2C_MISC2_WAY_AGENT_A)
+
+
+#endif /* _BCM1480_L2C_H */
diff --git a/arch/mips/include/asm/sibyte/bcm1480_mc.h b/arch/mips/include/asm/sibyte/bcm1480_mc.h
new file mode 100644
index 00000000000..f26a41a82b5
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/bcm1480_mc.h
@@ -0,0 +1,984 @@
+/* *********************************************************************
+ * BCM1280/BCM1480 Board Support Package
+ *
+ * Memory Controller constants File: bcm1480_mc.h
+ *
+ * This module contains constants and macros useful for
+ * programming the memory controller.
+ *
+ * BCM1400 specification level: 1280-UM100-D1 (11/14/03 Review Copy)
+ *
+ *********************************************************************
+ *
+ * Copyright 2000,2001,2002,2003
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+
+#ifndef _BCM1480_MC_H
+#define _BCM1480_MC_H
+
+#include "sb1250_defs.h"
+
+/*
+ * Memory Channel Configuration Register (Table 81)
+ */
+
+#define S_BCM1480_MC_INTLV0 0
+#define M_BCM1480_MC_INTLV0 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV0)
+#define V_BCM1480_MC_INTLV0(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV0)
+#define G_BCM1480_MC_INTLV0(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV0, M_BCM1480_MC_INTLV0)
+#define V_BCM1480_MC_INTLV0_DEFAULT V_BCM1480_MC_INTLV0(0)
+
+#define S_BCM1480_MC_INTLV1 8
+#define M_BCM1480_MC_INTLV1 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV1)
+#define V_BCM1480_MC_INTLV1(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV1)
+#define G_BCM1480_MC_INTLV1(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV1, M_BCM1480_MC_INTLV1)
+#define V_BCM1480_MC_INTLV1_DEFAULT V_BCM1480_MC_INTLV1(0)
+
+#define S_BCM1480_MC_INTLV2 16
+#define M_BCM1480_MC_INTLV2 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV2)
+#define V_BCM1480_MC_INTLV2(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV2)
+#define G_BCM1480_MC_INTLV2(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV2, M_BCM1480_MC_INTLV2)
+#define V_BCM1480_MC_INTLV2_DEFAULT V_BCM1480_MC_INTLV2(0)
+
+#define S_BCM1480_MC_CS_MODE 32
+#define M_BCM1480_MC_CS_MODE _SB_MAKEMASK(8, S_BCM1480_MC_CS_MODE)
+#define V_BCM1480_MC_CS_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS_MODE)
+#define G_BCM1480_MC_CS_MODE(x) _SB_GETVALUE(x, S_BCM1480_MC_CS_MODE, M_BCM1480_MC_CS_MODE)
+#define V_BCM1480_MC_CS_MODE_DEFAULT V_BCM1480_MC_CS_MODE(0)
+
+#define V_BCM1480_MC_CONFIG_DEFAULT (V_BCM1480_MC_INTLV0_DEFAULT | \
+ V_BCM1480_MC_INTLV1_DEFAULT | \
+ V_BCM1480_MC_INTLV2_DEFAULT | \
+ V_BCM1480_MC_CS_MODE_DEFAULT)
+
+#define K_BCM1480_MC_CS01_MODE 0x03
+#define K_BCM1480_MC_CS02_MODE 0x05
+#define K_BCM1480_MC_CS0123_MODE 0x0F
+#define K_BCM1480_MC_CS0246_MODE 0x55
+#define K_BCM1480_MC_CS0145_MODE 0x33
+#define K_BCM1480_MC_CS0167_MODE 0xC3
+#define K_BCM1480_MC_CSFULL_MODE 0xFF
+
+/*
+ * Chip Select Start Address Register (Table 82)
+ */
+
+#define S_BCM1480_MC_CS0_START 0
+#define M_BCM1480_MC_CS0_START _SB_MAKEMASK(12, S_BCM1480_MC_CS0_START)
+#define V_BCM1480_MC_CS0_START(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS0_START)
+#define G_BCM1480_MC_CS0_START(x) _SB_GETVALUE(x, S_BCM1480_MC_CS0_START, M_BCM1480_MC_CS0_START)
+
+#define S_BCM1480_MC_CS1_START 16
+#define M_BCM1480_MC_CS1_START _SB_MAKEMASK(12, S_BCM1480_MC_CS1_START)
+#define V_BCM1480_MC_CS1_START(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS1_START)
+#define G_BCM1480_MC_CS1_START(x) _SB_GETVALUE(x, S_BCM1480_MC_CS1_START, M_BCM1480_MC_CS1_START)
+
+#define S_BCM1480_MC_CS2_START 32
+#define M_BCM1480_MC_CS2_START _SB_MAKEMASK(12, S_BCM1480_MC_CS2_START)
+#define V_BCM1480_MC_CS2_START(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS2_START)
+#define G_BCM1480_MC_CS2_START(x) _SB_GETVALUE(x, S_BCM1480_MC_CS2_START, M_BCM1480_MC_CS2_START)
+
+#define S_BCM1480_MC_CS3_START 48
+#define M_BCM1480_MC_CS3_START _SB_MAKEMASK(12, S_BCM1480_MC_CS3_START)
+#define V_BCM1480_MC_CS3_START(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS3_START)
+#define G_BCM1480_MC_CS3_START(x) _SB_GETVALUE(x, S_BCM1480_MC_CS3_START, M_BCM1480_MC_CS3_START)
+
+/*
+ * Chip Select End Address Register (Table 83)
+ */
+
+#define S_BCM1480_MC_CS0_END 0
+#define M_BCM1480_MC_CS0_END _SB_MAKEMASK(12, S_BCM1480_MC_CS0_END)
+#define V_BCM1480_MC_CS0_END(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS0_END)
+#define G_BCM1480_MC_CS0_END(x) _SB_GETVALUE(x, S_BCM1480_MC_CS0_END, M_BCM1480_MC_CS0_END)
+
+#define S_BCM1480_MC_CS1_END 16
+#define M_BCM1480_MC_CS1_END _SB_MAKEMASK(12, S_BCM1480_MC_CS1_END)
+#define V_BCM1480_MC_CS1_END(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS1_END)
+#define G_BCM1480_MC_CS1_END(x) _SB_GETVALUE(x, S_BCM1480_MC_CS1_END, M_BCM1480_MC_CS1_END)
+
+#define S_BCM1480_MC_CS2_END 32
+#define M_BCM1480_MC_CS2_END _SB_MAKEMASK(12, S_BCM1480_MC_CS2_END)
+#define V_BCM1480_MC_CS2_END(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS2_END)
+#define G_BCM1480_MC_CS2_END(x) _SB_GETVALUE(x, S_BCM1480_MC_CS2_END, M_BCM1480_MC_CS2_END)
+
+#define S_BCM1480_MC_CS3_END 48
+#define M_BCM1480_MC_CS3_END _SB_MAKEMASK(12, S_BCM1480_MC_CS3_END)
+#define V_BCM1480_MC_CS3_END(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS3_END)
+#define G_BCM1480_MC_CS3_END(x) _SB_GETVALUE(x, S_BCM1480_MC_CS3_END, M_BCM1480_MC_CS3_END)
+
+/*
+ * Row Address Bit Select Register 0 (Table 84)
+ */
+
+#define S_BCM1480_MC_ROW00 0
+#define M_BCM1480_MC_ROW00 _SB_MAKEMASK(6, S_BCM1480_MC_ROW00)
+#define V_BCM1480_MC_ROW00(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW00)
+#define G_BCM1480_MC_ROW00(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW00, M_BCM1480_MC_ROW00)
+
+#define S_BCM1480_MC_ROW01 8
+#define M_BCM1480_MC_ROW01 _SB_MAKEMASK(6, S_BCM1480_MC_ROW01)
+#define V_BCM1480_MC_ROW01(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW01)
+#define G_BCM1480_MC_ROW01(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW01, M_BCM1480_MC_ROW01)
+
+#define S_BCM1480_MC_ROW02 16
+#define M_BCM1480_MC_ROW02 _SB_MAKEMASK(6, S_BCM1480_MC_ROW02)
+#define V_BCM1480_MC_ROW02(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW02)
+#define G_BCM1480_MC_ROW02(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW02, M_BCM1480_MC_ROW02)
+
+#define S_BCM1480_MC_ROW03 24
+#define M_BCM1480_MC_ROW03 _SB_MAKEMASK(6, S_BCM1480_MC_ROW03)
+#define V_BCM1480_MC_ROW03(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW03)
+#define G_BCM1480_MC_ROW03(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW03, M_BCM1480_MC_ROW03)
+
+#define S_BCM1480_MC_ROW04 32
+#define M_BCM1480_MC_ROW04 _SB_MAKEMASK(6, S_BCM1480_MC_ROW04)
+#define V_BCM1480_MC_ROW04(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW04)
+#define G_BCM1480_MC_ROW04(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW04, M_BCM1480_MC_ROW04)
+
+#define S_BCM1480_MC_ROW05 40
+#define M_BCM1480_MC_ROW05 _SB_MAKEMASK(6, S_BCM1480_MC_ROW05)
+#define V_BCM1480_MC_ROW05(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW05)
+#define G_BCM1480_MC_ROW05(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW05, M_BCM1480_MC_ROW05)
+
+#define S_BCM1480_MC_ROW06 48
+#define M_BCM1480_MC_ROW06 _SB_MAKEMASK(6, S_BCM1480_MC_ROW06)
+#define V_BCM1480_MC_ROW06(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW06)
+#define G_BCM1480_MC_ROW06(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW06, M_BCM1480_MC_ROW06)
+
+#define S_BCM1480_MC_ROW07 56
+#define M_BCM1480_MC_ROW07 _SB_MAKEMASK(6, S_BCM1480_MC_ROW07)
+#define V_BCM1480_MC_ROW07(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW07)
+#define G_BCM1480_MC_ROW07(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW07, M_BCM1480_MC_ROW07)
+
+/*
+ * Row Address Bit Select Register 1 (Table 85)
+ */
+
+#define S_BCM1480_MC_ROW08 0
+#define M_BCM1480_MC_ROW08 _SB_MAKEMASK(6, S_BCM1480_MC_ROW08)
+#define V_BCM1480_MC_ROW08(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW08)
+#define G_BCM1480_MC_ROW08(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW08, M_BCM1480_MC_ROW08)
+
+#define S_BCM1480_MC_ROW09 8
+#define M_BCM1480_MC_ROW09 _SB_MAKEMASK(6, S_BCM1480_MC_ROW09)
+#define V_BCM1480_MC_ROW09(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW09)
+#define G_BCM1480_MC_ROW09(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW09, M_BCM1480_MC_ROW09)
+
+#define S_BCM1480_MC_ROW10 16
+#define M_BCM1480_MC_ROW10 _SB_MAKEMASK(6, S_BCM1480_MC_ROW10)
+#define V_BCM1480_MC_ROW10(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW10)
+#define G_BCM1480_MC_ROW10(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW10, M_BCM1480_MC_ROW10)
+
+#define S_BCM1480_MC_ROW11 24
+#define M_BCM1480_MC_ROW11 _SB_MAKEMASK(6, S_BCM1480_MC_ROW11)
+#define V_BCM1480_MC_ROW11(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW11)
+#define G_BCM1480_MC_ROW11(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW11, M_BCM1480_MC_ROW11)
+
+#define S_BCM1480_MC_ROW12 32
+#define M_BCM1480_MC_ROW12 _SB_MAKEMASK(6, S_BCM1480_MC_ROW12)
+#define V_BCM1480_MC_ROW12(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW12)
+#define G_BCM1480_MC_ROW12(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW12, M_BCM1480_MC_ROW12)
+
+#define S_BCM1480_MC_ROW13 40
+#define M_BCM1480_MC_ROW13 _SB_MAKEMASK(6, S_BCM1480_MC_ROW13)
+#define V_BCM1480_MC_ROW13(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW13)
+#define G_BCM1480_MC_ROW13(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW13, M_BCM1480_MC_ROW13)
+
+#define S_BCM1480_MC_ROW14 48
+#define M_BCM1480_MC_ROW14 _SB_MAKEMASK(6, S_BCM1480_MC_ROW14)
+#define V_BCM1480_MC_ROW14(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ROW14)
+#define G_BCM1480_MC_ROW14(x) _SB_GETVALUE(x, S_BCM1480_MC_ROW14, M_BCM1480_MC_ROW14)
+
+#define K_BCM1480_MC_ROWX_BIT_SPACING 8
+
+/*
+ * Column Address Bit Select Register 0 (Table 86)
+ */
+
+#define S_BCM1480_MC_COL00 0
+#define M_BCM1480_MC_COL00 _SB_MAKEMASK(6, S_BCM1480_MC_COL00)
+#define V_BCM1480_MC_COL00(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL00)
+#define G_BCM1480_MC_COL00(x) _SB_GETVALUE(x, S_BCM1480_MC_COL00, M_BCM1480_MC_COL00)
+
+#define S_BCM1480_MC_COL01 8
+#define M_BCM1480_MC_COL01 _SB_MAKEMASK(6, S_BCM1480_MC_COL01)
+#define V_BCM1480_MC_COL01(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL01)
+#define G_BCM1480_MC_COL01(x) _SB_GETVALUE(x, S_BCM1480_MC_COL01, M_BCM1480_MC_COL01)
+
+#define S_BCM1480_MC_COL02 16
+#define M_BCM1480_MC_COL02 _SB_MAKEMASK(6, S_BCM1480_MC_COL02)
+#define V_BCM1480_MC_COL02(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL02)
+#define G_BCM1480_MC_COL02(x) _SB_GETVALUE(x, S_BCM1480_MC_COL02, M_BCM1480_MC_COL02)
+
+#define S_BCM1480_MC_COL03 24
+#define M_BCM1480_MC_COL03 _SB_MAKEMASK(6, S_BCM1480_MC_COL03)
+#define V_BCM1480_MC_COL03(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL03)
+#define G_BCM1480_MC_COL03(x) _SB_GETVALUE(x, S_BCM1480_MC_COL03, M_BCM1480_MC_COL03)
+
+#define S_BCM1480_MC_COL04 32
+#define M_BCM1480_MC_COL04 _SB_MAKEMASK(6, S_BCM1480_MC_COL04)
+#define V_BCM1480_MC_COL04(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL04)
+#define G_BCM1480_MC_COL04(x) _SB_GETVALUE(x, S_BCM1480_MC_COL04, M_BCM1480_MC_COL04)
+
+#define S_BCM1480_MC_COL05 40
+#define M_BCM1480_MC_COL05 _SB_MAKEMASK(6, S_BCM1480_MC_COL05)
+#define V_BCM1480_MC_COL05(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL05)
+#define G_BCM1480_MC_COL05(x) _SB_GETVALUE(x, S_BCM1480_MC_COL05, M_BCM1480_MC_COL05)
+
+#define S_BCM1480_MC_COL06 48
+#define M_BCM1480_MC_COL06 _SB_MAKEMASK(6, S_BCM1480_MC_COL06)
+#define V_BCM1480_MC_COL06(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL06)
+#define G_BCM1480_MC_COL06(x) _SB_GETVALUE(x, S_BCM1480_MC_COL06, M_BCM1480_MC_COL06)
+
+#define S_BCM1480_MC_COL07 56
+#define M_BCM1480_MC_COL07 _SB_MAKEMASK(6, S_BCM1480_MC_COL07)
+#define V_BCM1480_MC_COL07(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL07)
+#define G_BCM1480_MC_COL07(x) _SB_GETVALUE(x, S_BCM1480_MC_COL07, M_BCM1480_MC_COL07)
+
+/*
+ * Column Address Bit Select Register 1 (Table 87)
+ */
+
+#define S_BCM1480_MC_COL08 0
+#define M_BCM1480_MC_COL08 _SB_MAKEMASK(6, S_BCM1480_MC_COL08)
+#define V_BCM1480_MC_COL08(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL08)
+#define G_BCM1480_MC_COL08(x) _SB_GETVALUE(x, S_BCM1480_MC_COL08, M_BCM1480_MC_COL08)
+
+#define S_BCM1480_MC_COL09 8
+#define M_BCM1480_MC_COL09 _SB_MAKEMASK(6, S_BCM1480_MC_COL09)
+#define V_BCM1480_MC_COL09(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL09)
+#define G_BCM1480_MC_COL09(x) _SB_GETVALUE(x, S_BCM1480_MC_COL09, M_BCM1480_MC_COL09)
+
+#define S_BCM1480_MC_COL10 16 /* not a valid position, must be prog as 0 */
+
+#define S_BCM1480_MC_COL11 24
+#define M_BCM1480_MC_COL11 _SB_MAKEMASK(6, S_BCM1480_MC_COL11)
+#define V_BCM1480_MC_COL11(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL11)
+#define G_BCM1480_MC_COL11(x) _SB_GETVALUE(x, S_BCM1480_MC_COL11, M_BCM1480_MC_COL11)
+
+#define S_BCM1480_MC_COL12 32
+#define M_BCM1480_MC_COL12 _SB_MAKEMASK(6, S_BCM1480_MC_COL12)
+#define V_BCM1480_MC_COL12(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL12)
+#define G_BCM1480_MC_COL12(x) _SB_GETVALUE(x, S_BCM1480_MC_COL12, M_BCM1480_MC_COL12)
+
+#define S_BCM1480_MC_COL13 40
+#define M_BCM1480_MC_COL13 _SB_MAKEMASK(6, S_BCM1480_MC_COL13)
+#define V_BCM1480_MC_COL13(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL13)
+#define G_BCM1480_MC_COL13(x) _SB_GETVALUE(x, S_BCM1480_MC_COL13, M_BCM1480_MC_COL13)
+
+#define S_BCM1480_MC_COL14 48
+#define M_BCM1480_MC_COL14 _SB_MAKEMASK(6, S_BCM1480_MC_COL14)
+#define V_BCM1480_MC_COL14(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COL14)
+#define G_BCM1480_MC_COL14(x) _SB_GETVALUE(x, S_BCM1480_MC_COL14, M_BCM1480_MC_COL14)
+
+#define K_BCM1480_MC_COLX_BIT_SPACING 8
+
+/*
+ * CS0 and CS1 Bank Address Bit Select Register (Table 88)
+ */
+
+#define S_BCM1480_MC_CS01_BANK0 0
+#define M_BCM1480_MC_CS01_BANK0 _SB_MAKEMASK(6, S_BCM1480_MC_CS01_BANK0)
+#define V_BCM1480_MC_CS01_BANK0(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS01_BANK0)
+#define G_BCM1480_MC_CS01_BANK0(x) _SB_GETVALUE(x, S_BCM1480_MC_CS01_BANK0, M_BCM1480_MC_CS01_BANK0)
+
+#define S_BCM1480_MC_CS01_BANK1 8
+#define M_BCM1480_MC_CS01_BANK1 _SB_MAKEMASK(6, S_BCM1480_MC_CS01_BANK1)
+#define V_BCM1480_MC_CS01_BANK1(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS01_BANK1)
+#define G_BCM1480_MC_CS01_BANK1(x) _SB_GETVALUE(x, S_BCM1480_MC_CS01_BANK1, M_BCM1480_MC_CS01_BANK1)
+
+#define S_BCM1480_MC_CS01_BANK2 16
+#define M_BCM1480_MC_CS01_BANK2 _SB_MAKEMASK(6, S_BCM1480_MC_CS01_BANK2)
+#define V_BCM1480_MC_CS01_BANK2(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS01_BANK2)
+#define G_BCM1480_MC_CS01_BANK2(x) _SB_GETVALUE(x, S_BCM1480_MC_CS01_BANK2, M_BCM1480_MC_CS01_BANK2)
+
+/*
+ * CS2 and CS3 Bank Address Bit Select Register (Table 89)
+ */
+
+#define S_BCM1480_MC_CS23_BANK0 0
+#define M_BCM1480_MC_CS23_BANK0 _SB_MAKEMASK(6, S_BCM1480_MC_CS23_BANK0)
+#define V_BCM1480_MC_CS23_BANK0(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS23_BANK0)
+#define G_BCM1480_MC_CS23_BANK0(x) _SB_GETVALUE(x, S_BCM1480_MC_CS23_BANK0, M_BCM1480_MC_CS23_BANK0)
+
+#define S_BCM1480_MC_CS23_BANK1 8
+#define M_BCM1480_MC_CS23_BANK1 _SB_MAKEMASK(6, S_BCM1480_MC_CS23_BANK1)
+#define V_BCM1480_MC_CS23_BANK1(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS23_BANK1)
+#define G_BCM1480_MC_CS23_BANK1(x) _SB_GETVALUE(x, S_BCM1480_MC_CS23_BANK1, M_BCM1480_MC_CS23_BANK1)
+
+#define S_BCM1480_MC_CS23_BANK2 16
+#define M_BCM1480_MC_CS23_BANK2 _SB_MAKEMASK(6, S_BCM1480_MC_CS23_BANK2)
+#define V_BCM1480_MC_CS23_BANK2(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS23_BANK2)
+#define G_BCM1480_MC_CS23_BANK2(x) _SB_GETVALUE(x, S_BCM1480_MC_CS23_BANK2, M_BCM1480_MC_CS23_BANK2)
+
+#define K_BCM1480_MC_CSXX_BANKX_BIT_SPACING 8
+
+/*
+ * DRAM Command Register (Table 90)
+ */
+
+#define S_BCM1480_MC_COMMAND 0
+#define M_BCM1480_MC_COMMAND _SB_MAKEMASK(4, S_BCM1480_MC_COMMAND)
+#define V_BCM1480_MC_COMMAND(x) _SB_MAKEVALUE(x, S_BCM1480_MC_COMMAND)
+#define G_BCM1480_MC_COMMAND(x) _SB_GETVALUE(x, S_BCM1480_MC_COMMAND, M_BCM1480_MC_COMMAND)
+
+#define K_BCM1480_MC_COMMAND_EMRS 0
+#define K_BCM1480_MC_COMMAND_MRS 1
+#define K_BCM1480_MC_COMMAND_PRE 2
+#define K_BCM1480_MC_COMMAND_AR 3
+#define K_BCM1480_MC_COMMAND_SETRFSH 4
+#define K_BCM1480_MC_COMMAND_CLRRFSH 5
+#define K_BCM1480_MC_COMMAND_SETPWRDN 6
+#define K_BCM1480_MC_COMMAND_CLRPWRDN 7
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define K_BCM1480_MC_COMMAND_EMRS2 8
+#define K_BCM1480_MC_COMMAND_EMRS3 9
+#define K_BCM1480_MC_COMMAND_ENABLE_MCLK 10
+#define K_BCM1480_MC_COMMAND_DISABLE_MCLK 11
+#endif
+
+#define V_BCM1480_MC_COMMAND_EMRS V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS)
+#define V_BCM1480_MC_COMMAND_MRS V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_MRS)
+#define V_BCM1480_MC_COMMAND_PRE V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_PRE)
+#define V_BCM1480_MC_COMMAND_AR V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_AR)
+#define V_BCM1480_MC_COMMAND_SETRFSH V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_SETRFSH)
+#define V_BCM1480_MC_COMMAND_CLRRFSH V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_CLRRFSH)
+#define V_BCM1480_MC_COMMAND_SETPWRDN V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_SETPWRDN)
+#define V_BCM1480_MC_COMMAND_CLRPWRDN V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_CLRPWRDN)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define V_BCM1480_MC_COMMAND_EMRS2 V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS2)
+#define V_BCM1480_MC_COMMAND_EMRS3 V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS3)
+#define V_BCM1480_MC_COMMAND_ENABLE_MCLK V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_ENABLE_MCLK)
+#define V_BCM1480_MC_COMMAND_DISABLE_MCLK V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_DISABLE_MCLK)
+#endif
+
+#define S_BCM1480_MC_CS0 4
+#define M_BCM1480_MC_CS0 _SB_MAKEMASK1(4)
+#define M_BCM1480_MC_CS1 _SB_MAKEMASK1(5)
+#define M_BCM1480_MC_CS2 _SB_MAKEMASK1(6)
+#define M_BCM1480_MC_CS3 _SB_MAKEMASK1(7)
+#define M_BCM1480_MC_CS4 _SB_MAKEMASK1(8)
+#define M_BCM1480_MC_CS5 _SB_MAKEMASK1(9)
+#define M_BCM1480_MC_CS6 _SB_MAKEMASK1(10)
+#define M_BCM1480_MC_CS7 _SB_MAKEMASK1(11)
+
+#define M_BCM1480_MC_CS _SB_MAKEMASK(8, S_BCM1480_MC_CS0)
+#define V_BCM1480_MC_CS(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CS0)
+#define G_BCM1480_MC_CS(x) _SB_GETVALUE(x, S_BCM1480_MC_CS0, M_BCM1480_MC_CS0)
+
+#define M_BCM1480_MC_CMD_ACTIVE _SB_MAKEMASK1(16)
+
+/*
+ * DRAM Mode Register (Table 91)
+ */
+
+#define S_BCM1480_MC_EMODE 0
+#define M_BCM1480_MC_EMODE _SB_MAKEMASK(15, S_BCM1480_MC_EMODE)
+#define V_BCM1480_MC_EMODE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_EMODE)
+#define G_BCM1480_MC_EMODE(x) _SB_GETVALUE(x, S_BCM1480_MC_EMODE, M_BCM1480_MC_EMODE)
+#define V_BCM1480_MC_EMODE_DEFAULT V_BCM1480_MC_EMODE(0)
+
+#define S_BCM1480_MC_MODE 16
+#define M_BCM1480_MC_MODE _SB_MAKEMASK(15, S_BCM1480_MC_MODE)
+#define V_BCM1480_MC_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_MODE)
+#define G_BCM1480_MC_MODE(x) _SB_GETVALUE(x, S_BCM1480_MC_MODE, M_BCM1480_MC_MODE)
+#define V_BCM1480_MC_MODE_DEFAULT V_BCM1480_MC_MODE(0)
+
+#define S_BCM1480_MC_DRAM_TYPE 32
+#define M_BCM1480_MC_DRAM_TYPE _SB_MAKEMASK(4, S_BCM1480_MC_DRAM_TYPE)
+#define V_BCM1480_MC_DRAM_TYPE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DRAM_TYPE)
+#define G_BCM1480_MC_DRAM_TYPE(x) _SB_GETVALUE(x, S_BCM1480_MC_DRAM_TYPE, M_BCM1480_MC_DRAM_TYPE)
+
+#define K_BCM1480_MC_DRAM_TYPE_JEDEC 0
+#define K_BCM1480_MC_DRAM_TYPE_FCRAM 1
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define K_BCM1480_MC_DRAM_TYPE_DDR2 2
+#endif
+
+#define K_BCM1480_MC_DRAM_TYPE_DDR2_PASS1 0
+
+#define V_BCM1480_MC_DRAM_TYPE_JEDEC V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_JEDEC)
+#define V_BCM1480_MC_DRAM_TYPE_FCRAM V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_FCRAM)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define V_BCM1480_MC_DRAM_TYPE_DDR2 V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_DDR2)
+#endif
+
+#define M_BCM1480_MC_GANGED _SB_MAKEMASK1(36)
+#define M_BCM1480_MC_BY9_INTF _SB_MAKEMASK1(37)
+#define M_BCM1480_MC_FORCE_ECC64 _SB_MAKEMASK1(38)
+#define M_BCM1480_MC_ECC_DISABLE _SB_MAKEMASK1(39)
+
+#define S_BCM1480_MC_PG_POLICY 40
+#define M_BCM1480_MC_PG_POLICY _SB_MAKEMASK(2, S_BCM1480_MC_PG_POLICY)
+#define V_BCM1480_MC_PG_POLICY(x) _SB_MAKEVALUE(x, S_BCM1480_MC_PG_POLICY)
+#define G_BCM1480_MC_PG_POLICY(x) _SB_GETVALUE(x, S_BCM1480_MC_PG_POLICY, M_BCM1480_MC_PG_POLICY)
+
+#define K_BCM1480_MC_PG_POLICY_CLOSED 0
+#define K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK 1
+
+#define V_BCM1480_MC_PG_POLICY_CLOSED V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CLOSED)
+#define V_BCM1480_MC_PG_POLICY_CAS_TIME_CHK V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define M_BCM1480_MC_2T_CMD _SB_MAKEMASK1(42)
+#define M_BCM1480_MC_ECC_COR_DIS _SB_MAKEMASK1(43)
+#endif
+
+#define V_BCM1480_MC_DRAMMODE_DEFAULT V_BCM1480_MC_EMODE_DEFAULT | V_BCM1480_MC_MODE_DEFAULT | V_BCM1480_MC_DRAM_TYPE_JEDEC | \
+ V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK)
+
+/*
+ * Memory Clock Configuration Register (Table 92)
+ */
+
+#define S_BCM1480_MC_CLK_RATIO 0
+#define M_BCM1480_MC_CLK_RATIO _SB_MAKEMASK(6, S_BCM1480_MC_CLK_RATIO)
+#define V_BCM1480_MC_CLK_RATIO(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CLK_RATIO)
+#define G_BCM1480_MC_CLK_RATIO(x) _SB_GETVALUE(x, S_BCM1480_MC_CLK_RATIO, M_BCM1480_MC_CLK_RATIO)
+
+#define V_BCM1480_MC_CLK_RATIO_DEFAULT V_BCM1480_MC_CLK_RATIO(10)
+
+#define S_BCM1480_MC_REF_RATE 8
+#define M_BCM1480_MC_REF_RATE _SB_MAKEMASK(8, S_BCM1480_MC_REF_RATE)
+#define V_BCM1480_MC_REF_RATE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_REF_RATE)
+#define G_BCM1480_MC_REF_RATE(x) _SB_GETVALUE(x, S_BCM1480_MC_REF_RATE, M_BCM1480_MC_REF_RATE)
+
+#define K_BCM1480_MC_REF_RATE_100MHz 0x31
+#define K_BCM1480_MC_REF_RATE_200MHz 0x62
+#define K_BCM1480_MC_REF_RATE_400MHz 0xC4
+
+#define V_BCM1480_MC_REF_RATE_100MHz V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_100MHz)
+#define V_BCM1480_MC_REF_RATE_200MHz V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_200MHz)
+#define V_BCM1480_MC_REF_RATE_400MHz V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_400MHz)
+#define V_BCM1480_MC_REF_RATE_DEFAULT V_BCM1480_MC_REF_RATE_400MHz
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define M_BCM1480_MC_AUTO_REF_DIS _SB_MAKEMASK1(16)
+#endif
+
+/*
+ * ODT Register (Table 99)
+ */
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define M_BCM1480_MC_RD_ODT0_CS0 _SB_MAKEMASK1(0)
+#define M_BCM1480_MC_RD_ODT0_CS2 _SB_MAKEMASK1(1)
+#define M_BCM1480_MC_RD_ODT0_CS4 _SB_MAKEMASK1(2)
+#define M_BCM1480_MC_RD_ODT0_CS6 _SB_MAKEMASK1(3)
+#define M_BCM1480_MC_WR_ODT0_CS0 _SB_MAKEMASK1(4)
+#define M_BCM1480_MC_WR_ODT0_CS2 _SB_MAKEMASK1(5)
+#define M_BCM1480_MC_WR_ODT0_CS4 _SB_MAKEMASK1(6)
+#define M_BCM1480_MC_WR_ODT0_CS6 _SB_MAKEMASK1(7)
+#define M_BCM1480_MC_RD_ODT2_CS0 _SB_MAKEMASK1(8)
+#define M_BCM1480_MC_RD_ODT2_CS2 _SB_MAKEMASK1(9)
+#define M_BCM1480_MC_RD_ODT2_CS4 _SB_MAKEMASK1(10)
+#define M_BCM1480_MC_RD_ODT2_CS6 _SB_MAKEMASK1(11)
+#define M_BCM1480_MC_WR_ODT2_CS0 _SB_MAKEMASK1(12)
+#define M_BCM1480_MC_WR_ODT2_CS2 _SB_MAKEMASK1(13)
+#define M_BCM1480_MC_WR_ODT2_CS4 _SB_MAKEMASK1(14)
+#define M_BCM1480_MC_WR_ODT2_CS6 _SB_MAKEMASK1(15)
+#define M_BCM1480_MC_RD_ODT4_CS0 _SB_MAKEMASK1(16)
+#define M_BCM1480_MC_RD_ODT4_CS2 _SB_MAKEMASK1(17)
+#define M_BCM1480_MC_RD_ODT4_CS4 _SB_MAKEMASK1(18)
+#define M_BCM1480_MC_RD_ODT4_CS6 _SB_MAKEMASK1(19)
+#define M_BCM1480_MC_WR_ODT4_CS0 _SB_MAKEMASK1(20)
+#define M_BCM1480_MC_WR_ODT4_CS2 _SB_MAKEMASK1(21)
+#define M_BCM1480_MC_WR_ODT4_CS4 _SB_MAKEMASK1(22)
+#define M_BCM1480_MC_WR_ODT4_CS6 _SB_MAKEMASK1(23)
+#define M_BCM1480_MC_RD_ODT6_CS0 _SB_MAKEMASK1(24)
+#define M_BCM1480_MC_RD_ODT6_CS2 _SB_MAKEMASK1(25)
+#define M_BCM1480_MC_RD_ODT6_CS4 _SB_MAKEMASK1(26)
+#define M_BCM1480_MC_RD_ODT6_CS6 _SB_MAKEMASK1(27)
+#define M_BCM1480_MC_WR_ODT6_CS0 _SB_MAKEMASK1(28)
+#define M_BCM1480_MC_WR_ODT6_CS2 _SB_MAKEMASK1(29)
+#define M_BCM1480_MC_WR_ODT6_CS4 _SB_MAKEMASK1(30)
+#define M_BCM1480_MC_WR_ODT6_CS6 _SB_MAKEMASK1(31)
+
+#define M_BCM1480_MC_CS_ODD_ODT_EN _SB_MAKEMASK1(32)
+
+#define S_BCM1480_MC_ODT0 0
+#define M_BCM1480_MC_ODT0 _SB_MAKEMASK(8, S_BCM1480_MC_ODT0)
+#define V_BCM1480_MC_ODT0(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ODT0)
+
+#define S_BCM1480_MC_ODT2 8
+#define M_BCM1480_MC_ODT2 _SB_MAKEMASK(8, S_BCM1480_MC_ODT2)
+#define V_BCM1480_MC_ODT2(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ODT2)
+
+#define S_BCM1480_MC_ODT4 16
+#define M_BCM1480_MC_ODT4 _SB_MAKEMASK(8, S_BCM1480_MC_ODT4)
+#define V_BCM1480_MC_ODT4(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ODT4)
+
+#define S_BCM1480_MC_ODT6 24
+#define M_BCM1480_MC_ODT6 _SB_MAKEMASK(8, S_BCM1480_MC_ODT6)
+#define V_BCM1480_MC_ODT6(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ODT6)
+#endif
+
+/*
+ * Memory DLL Configuration Register (Table 93)
+ */
+
+#define S_BCM1480_MC_ADDR_COARSE_ADJ 0
+#define M_BCM1480_MC_ADDR_COARSE_ADJ _SB_MAKEMASK(6, S_BCM1480_MC_ADDR_COARSE_ADJ)
+#define V_BCM1480_MC_ADDR_COARSE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ADDR_COARSE_ADJ)
+#define G_BCM1480_MC_ADDR_COARSE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_ADDR_COARSE_ADJ, M_BCM1480_MC_ADDR_COARSE_ADJ)
+#define V_BCM1480_MC_ADDR_COARSE_ADJ_DEFAULT V_BCM1480_MC_ADDR_COARSE_ADJ(0x0)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_ADDR_FREQ_RANGE 8
+#define M_BCM1480_MC_ADDR_FREQ_RANGE _SB_MAKEMASK(4, S_BCM1480_MC_ADDR_FREQ_RANGE)
+#define V_BCM1480_MC_ADDR_FREQ_RANGE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ADDR_FREQ_RANGE)
+#define G_BCM1480_MC_ADDR_FREQ_RANGE(x) _SB_GETVALUE(x, S_BCM1480_MC_ADDR_FREQ_RANGE, M_BCM1480_MC_ADDR_FREQ_RANGE)
+#define V_BCM1480_MC_ADDR_FREQ_RANGE_DEFAULT V_BCM1480_MC_ADDR_FREQ_RANGE(0x4)
+#endif
+
+#define S_BCM1480_MC_ADDR_FINE_ADJ 8
+#define M_BCM1480_MC_ADDR_FINE_ADJ _SB_MAKEMASK(4, S_BCM1480_MC_ADDR_FINE_ADJ)
+#define V_BCM1480_MC_ADDR_FINE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ADDR_FINE_ADJ)
+#define G_BCM1480_MC_ADDR_FINE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_ADDR_FINE_ADJ, M_BCM1480_MC_ADDR_FINE_ADJ)
+#define V_BCM1480_MC_ADDR_FINE_ADJ_DEFAULT V_BCM1480_MC_ADDR_FINE_ADJ(0x8)
+
+#define S_BCM1480_MC_DQI_COARSE_ADJ 16
+#define M_BCM1480_MC_DQI_COARSE_ADJ _SB_MAKEMASK(6, S_BCM1480_MC_DQI_COARSE_ADJ)
+#define V_BCM1480_MC_DQI_COARSE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQI_COARSE_ADJ)
+#define G_BCM1480_MC_DQI_COARSE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_DQI_COARSE_ADJ, M_BCM1480_MC_DQI_COARSE_ADJ)
+#define V_BCM1480_MC_DQI_COARSE_ADJ_DEFAULT V_BCM1480_MC_DQI_COARSE_ADJ(0x0)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DQI_FREQ_RANGE 24
+#define M_BCM1480_MC_DQI_FREQ_RANGE _SB_MAKEMASK(4, S_BCM1480_MC_DQI_FREQ_RANGE)
+#define V_BCM1480_MC_DQI_FREQ_RANGE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQI_FREQ_RANGE)
+#define G_BCM1480_MC_DQI_FREQ_RANGE(x) _SB_GETVALUE(x, S_BCM1480_MC_DQI_FREQ_RANGE, M_BCM1480_MC_DQI_FREQ_RANGE)
+#define V_BCM1480_MC_DQI_FREQ_RANGE_DEFAULT V_BCM1480_MC_DQI_FREQ_RANGE(0x4)
+#endif
+
+#define S_BCM1480_MC_DQI_FINE_ADJ 24
+#define M_BCM1480_MC_DQI_FINE_ADJ _SB_MAKEMASK(4, S_BCM1480_MC_DQI_FINE_ADJ)
+#define V_BCM1480_MC_DQI_FINE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQI_FINE_ADJ)
+#define G_BCM1480_MC_DQI_FINE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_DQI_FINE_ADJ, M_BCM1480_MC_DQI_FINE_ADJ)
+#define V_BCM1480_MC_DQI_FINE_ADJ_DEFAULT V_BCM1480_MC_DQI_FINE_ADJ(0x8)
+
+#define S_BCM1480_MC_DQO_COARSE_ADJ 32
+#define M_BCM1480_MC_DQO_COARSE_ADJ _SB_MAKEMASK(6, S_BCM1480_MC_DQO_COARSE_ADJ)
+#define V_BCM1480_MC_DQO_COARSE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQO_COARSE_ADJ)
+#define G_BCM1480_MC_DQO_COARSE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_DQO_COARSE_ADJ, M_BCM1480_MC_DQO_COARSE_ADJ)
+#define V_BCM1480_MC_DQO_COARSE_ADJ_DEFAULT V_BCM1480_MC_DQO_COARSE_ADJ(0x0)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DQO_FREQ_RANGE 40
+#define M_BCM1480_MC_DQO_FREQ_RANGE _SB_MAKEMASK(4, S_BCM1480_MC_DQO_FREQ_RANGE)
+#define V_BCM1480_MC_DQO_FREQ_RANGE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQO_FREQ_RANGE)
+#define G_BCM1480_MC_DQO_FREQ_RANGE(x) _SB_GETVALUE(x, S_BCM1480_MC_DQO_FREQ_RANGE, M_BCM1480_MC_DQO_FREQ_RANGE)
+#define V_BCM1480_MC_DQO_FREQ_RANGE_DEFAULT V_BCM1480_MC_DQO_FREQ_RANGE(0x4)
+#endif
+
+#define S_BCM1480_MC_DQO_FINE_ADJ 40
+#define M_BCM1480_MC_DQO_FINE_ADJ _SB_MAKEMASK(4, S_BCM1480_MC_DQO_FINE_ADJ)
+#define V_BCM1480_MC_DQO_FINE_ADJ(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DQO_FINE_ADJ)
+#define G_BCM1480_MC_DQO_FINE_ADJ(x) _SB_GETVALUE(x, S_BCM1480_MC_DQO_FINE_ADJ, M_BCM1480_MC_DQO_FINE_ADJ)
+#define V_BCM1480_MC_DQO_FINE_ADJ_DEFAULT V_BCM1480_MC_DQO_FINE_ADJ(0x8)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DLL_PDSEL 44
+#define M_BCM1480_MC_DLL_PDSEL _SB_MAKEMASK(2, S_BCM1480_MC_DLL_PDSEL)
+#define V_BCM1480_MC_DLL_PDSEL(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_PDSEL)
+#define G_BCM1480_MC_DLL_PDSEL(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_PDSEL, M_BCM1480_MC_DLL_PDSEL)
+#define V_BCM1480_MC_DLL_DEFAULT_PDSEL V_BCM1480_MC_DLL_PDSEL(0x0)
+
+#define M_BCM1480_MC_DLL_REGBYPASS _SB_MAKEMASK1(46)
+#define M_BCM1480_MC_DQO_SHIFT _SB_MAKEMASK1(47)
+#endif
+
+#define S_BCM1480_MC_DLL_DEFAULT 48
+#define M_BCM1480_MC_DLL_DEFAULT _SB_MAKEMASK(6, S_BCM1480_MC_DLL_DEFAULT)
+#define V_BCM1480_MC_DLL_DEFAULT(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_DEFAULT)
+#define G_BCM1480_MC_DLL_DEFAULT(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_DEFAULT, M_BCM1480_MC_DLL_DEFAULT)
+#define V_BCM1480_MC_DLL_DEFAULT_DEFAULT V_BCM1480_MC_DLL_DEFAULT(0x10)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DLL_REGCTRL 54
+#define M_BCM1480_MC_DLL_REGCTRL _SB_MAKEMASK(2, S_BCM1480_MC_DLL_REGCTRL)
+#define V_BCM1480_MC_DLL_REGCTRL(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_REGCTRL)
+#define G_BCM1480_MC_DLL_REGCTRL(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_REGCTRL, M_BCM1480_MC_DLL_REGCTRL)
+#define V_BCM1480_MC_DLL_DEFAULT_REGCTRL V_BCM1480_MC_DLL_REGCTRL(0x0)
+#endif
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DLL_FREQ_RANGE 56
+#define M_BCM1480_MC_DLL_FREQ_RANGE _SB_MAKEMASK(4, S_BCM1480_MC_DLL_FREQ_RANGE)
+#define V_BCM1480_MC_DLL_FREQ_RANGE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_FREQ_RANGE)
+#define G_BCM1480_MC_DLL_FREQ_RANGE(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_FREQ_RANGE, M_BCM1480_MC_DLL_FREQ_RANGE)
+#define V_BCM1480_MC_DLL_FREQ_RANGE_DEFAULT V_BCM1480_MC_DLL_FREQ_RANGE(0x4)
+#endif
+
+#define S_BCM1480_MC_DLL_STEP_SIZE 56
+#define M_BCM1480_MC_DLL_STEP_SIZE _SB_MAKEMASK(4, S_BCM1480_MC_DLL_STEP_SIZE)
+#define V_BCM1480_MC_DLL_STEP_SIZE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_STEP_SIZE)
+#define G_BCM1480_MC_DLL_STEP_SIZE(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_STEP_SIZE, M_BCM1480_MC_DLL_STEP_SIZE)
+#define V_BCM1480_MC_DLL_STEP_SIZE_DEFAULT V_BCM1480_MC_DLL_STEP_SIZE(0x8)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DLL_BGCTRL 60
+#define M_BCM1480_MC_DLL_BGCTRL _SB_MAKEMASK(2, S_BCM1480_MC_DLL_BGCTRL)
+#define V_BCM1480_MC_DLL_BGCTRL(x) _SB_MAKEVALUE(x, S_BCM1480_MC_DLL_BGCTRL)
+#define G_BCM1480_MC_DLL_BGCTRL(x) _SB_GETVALUE(x, S_BCM1480_MC_DLL_BGCTRL, M_BCM1480_MC_DLL_BGCTRL)
+#define V_BCM1480_MC_DLL_DEFAULT_BGCTRL V_BCM1480_MC_DLL_BGCTRL(0x0)
+#endif
+
+#define M_BCM1480_MC_DLL_BYPASS _SB_MAKEMASK1(63)
+
+/*
+ * Memory Drive Configuration Register (Table 94)
+ */
+
+#define S_BCM1480_MC_RTT_BYP_PULLDOWN 0
+#define M_BCM1480_MC_RTT_BYP_PULLDOWN _SB_MAKEMASK(3, S_BCM1480_MC_RTT_BYP_PULLDOWN)
+#define V_BCM1480_MC_RTT_BYP_PULLDOWN(x) _SB_MAKEVALUE(x, S_BCM1480_MC_RTT_BYP_PULLDOWN)
+#define G_BCM1480_MC_RTT_BYP_PULLDOWN(x) _SB_GETVALUE(x, S_BCM1480_MC_RTT_BYP_PULLDOWN, M_BCM1480_MC_RTT_BYP_PULLDOWN)
+
+#define S_BCM1480_MC_RTT_BYP_PULLUP 6
+#define M_BCM1480_MC_RTT_BYP_PULLUP _SB_MAKEMASK(3, S_BCM1480_MC_RTT_BYP_PULLUP)
+#define V_BCM1480_MC_RTT_BYP_PULLUP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_RTT_BYP_PULLUP)
+#define G_BCM1480_MC_RTT_BYP_PULLUP(x) _SB_GETVALUE(x, S_BCM1480_MC_RTT_BYP_PULLUP, M_BCM1480_MC_RTT_BYP_PULLUP)
+
+#define M_BCM1480_MC_RTT_BYPASS _SB_MAKEMASK1(8)
+#define M_BCM1480_MC_RTT_COMP_MOV_AVG _SB_MAKEMASK1(9)
+
+#define S_BCM1480_MC_PVT_BYP_C1_PULLDOWN 10
+#define M_BCM1480_MC_PVT_BYP_C1_PULLDOWN _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C1_PULLDOWN)
+#define V_BCM1480_MC_PVT_BYP_C1_PULLDOWN(x) _SB_MAKEVALUE(x, S_BCM1480_MC_PVT_BYP_C1_PULLDOWN)
+#define G_BCM1480_MC_PVT_BYP_C1_PULLDOWN(x) _SB_GETVALUE(x, S_BCM1480_MC_PVT_BYP_C1_PULLDOWN, M_BCM1480_MC_PVT_BYP_C1_PULLDOWN)
+
+#define S_BCM1480_MC_PVT_BYP_C1_PULLUP 15
+#define M_BCM1480_MC_PVT_BYP_C1_PULLUP _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C1_PULLUP)
+#define V_BCM1480_MC_PVT_BYP_C1_PULLUP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_PVT_BYP_C1_PULLUP)
+#define G_BCM1480_MC_PVT_BYP_C1_PULLUP(x) _SB_GETVALUE(x, S_BCM1480_MC_PVT_BYP_C1_PULLUP, M_BCM1480_MC_PVT_BYP_C1_PULLUP)
+
+#define S_BCM1480_MC_PVT_BYP_C2_PULLDOWN 20
+#define M_BCM1480_MC_PVT_BYP_C2_PULLDOWN _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C2_PULLDOWN)
+#define V_BCM1480_MC_PVT_BYP_C2_PULLDOWN(x) _SB_MAKEVALUE(x, S_BCM1480_MC_PVT_BYP_C2_PULLDOWN)
+#define G_BCM1480_MC_PVT_BYP_C2_PULLDOWN(x) _SB_GETVALUE(x, S_BCM1480_MC_PVT_BYP_C2_PULLDOWN, M_BCM1480_MC_PVT_BYP_C2_PULLDOWN)
+
+#define S_BCM1480_MC_PVT_BYP_C2_PULLUP 25
+#define M_BCM1480_MC_PVT_BYP_C2_PULLUP _SB_MAKEMASK(4, S_BCM1480_MC_PVT_BYP_C2_PULLUP)
+#define V_BCM1480_MC_PVT_BYP_C2_PULLUP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_PVT_BYP_C2_PULLUP)
+#define G_BCM1480_MC_PVT_BYP_C2_PULLUP(x) _SB_GETVALUE(x, S_BCM1480_MC_PVT_BYP_C2_PULLUP, M_BCM1480_MC_PVT_BYP_C2_PULLUP)
+
+#define M_BCM1480_MC_PVT_BYPASS _SB_MAKEMASK1(30)
+#define M_BCM1480_MC_PVT_COMP_MOV_AVG _SB_MAKEMASK1(31)
+
+#define M_BCM1480_MC_CLK_CLASS _SB_MAKEMASK1(34)
+#define M_BCM1480_MC_DATA_CLASS _SB_MAKEMASK1(35)
+#define M_BCM1480_MC_ADDR_CLASS _SB_MAKEMASK1(36)
+
+#define M_BCM1480_MC_DQ_ODT_75 _SB_MAKEMASK1(37)
+#define M_BCM1480_MC_DQ_ODT_150 _SB_MAKEMASK1(38)
+#define M_BCM1480_MC_DQS_ODT_75 _SB_MAKEMASK1(39)
+#define M_BCM1480_MC_DQS_ODT_150 _SB_MAKEMASK1(40)
+#define M_BCM1480_MC_DQS_DIFF _SB_MAKEMASK1(41)
+
+/*
+ * ECC Test Data Register (Table 95)
+ */
+
+#define S_BCM1480_MC_DATA_INVERT 0
+#define M_DATA_ECC_INVERT _SB_MAKEMASK(64, S_BCM1480_MC_ECC_INVERT)
+
+/*
+ * ECC Test ECC Register (Table 96)
+ */
+
+#define S_BCM1480_MC_ECC_INVERT 0
+#define M_BCM1480_MC_ECC_INVERT _SB_MAKEMASK(8, S_BCM1480_MC_ECC_INVERT)
+
+/*
+ * SDRAM Timing Register (Table 97)
+ */
+
+#define S_BCM1480_MC_tRCD 0
+#define M_BCM1480_MC_tRCD _SB_MAKEMASK(4, S_BCM1480_MC_tRCD)
+#define V_BCM1480_MC_tRCD(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRCD)
+#define G_BCM1480_MC_tRCD(x) _SB_GETVALUE(x, S_BCM1480_MC_tRCD, M_BCM1480_MC_tRCD)
+#define K_BCM1480_MC_tRCD_DEFAULT 3
+#define V_BCM1480_MC_tRCD_DEFAULT V_BCM1480_MC_tRCD(K_BCM1480_MC_tRCD_DEFAULT)
+
+#define S_BCM1480_MC_tCL 4
+#define M_BCM1480_MC_tCL _SB_MAKEMASK(4, S_BCM1480_MC_tCL)
+#define V_BCM1480_MC_tCL(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tCL)
+#define G_BCM1480_MC_tCL(x) _SB_GETVALUE(x, S_BCM1480_MC_tCL, M_BCM1480_MC_tCL)
+#define K_BCM1480_MC_tCL_DEFAULT 2
+#define V_BCM1480_MC_tCL_DEFAULT V_BCM1480_MC_tCL(K_BCM1480_MC_tCL_DEFAULT)
+
+#define M_BCM1480_MC_tCrDh _SB_MAKEMASK1(8)
+
+#define S_BCM1480_MC_tWR 9
+#define M_BCM1480_MC_tWR _SB_MAKEMASK(3, S_BCM1480_MC_tWR)
+#define V_BCM1480_MC_tWR(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tWR)
+#define G_BCM1480_MC_tWR(x) _SB_GETVALUE(x, S_BCM1480_MC_tWR, M_BCM1480_MC_tWR)
+#define K_BCM1480_MC_tWR_DEFAULT 2
+#define V_BCM1480_MC_tWR_DEFAULT V_BCM1480_MC_tWR(K_BCM1480_MC_tWR_DEFAULT)
+
+#define S_BCM1480_MC_tCwD 12
+#define M_BCM1480_MC_tCwD _SB_MAKEMASK(4, S_BCM1480_MC_tCwD)
+#define V_BCM1480_MC_tCwD(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tCwD)
+#define G_BCM1480_MC_tCwD(x) _SB_GETVALUE(x, S_BCM1480_MC_tCwD, M_BCM1480_MC_tCwD)
+#define K_BCM1480_MC_tCwD_DEFAULT 1
+#define V_BCM1480_MC_tCwD_DEFAULT V_BCM1480_MC_tCwD(K_BCM1480_MC_tCwD_DEFAULT)
+
+#define S_BCM1480_MC_tRP 16
+#define M_BCM1480_MC_tRP _SB_MAKEMASK(4, S_BCM1480_MC_tRP)
+#define V_BCM1480_MC_tRP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRP)
+#define G_BCM1480_MC_tRP(x) _SB_GETVALUE(x, S_BCM1480_MC_tRP, M_BCM1480_MC_tRP)
+#define K_BCM1480_MC_tRP_DEFAULT 4
+#define V_BCM1480_MC_tRP_DEFAULT V_BCM1480_MC_tRP(K_BCM1480_MC_tRP_DEFAULT)
+
+#define S_BCM1480_MC_tRRD 20
+#define M_BCM1480_MC_tRRD _SB_MAKEMASK(4, S_BCM1480_MC_tRRD)
+#define V_BCM1480_MC_tRRD(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRRD)
+#define G_BCM1480_MC_tRRD(x) _SB_GETVALUE(x, S_BCM1480_MC_tRRD, M_BCM1480_MC_tRRD)
+#define K_BCM1480_MC_tRRD_DEFAULT 2
+#define V_BCM1480_MC_tRRD_DEFAULT V_BCM1480_MC_tRRD(K_BCM1480_MC_tRRD_DEFAULT)
+
+#define S_BCM1480_MC_tRCw 24
+#define M_BCM1480_MC_tRCw _SB_MAKEMASK(5, S_BCM1480_MC_tRCw)
+#define V_BCM1480_MC_tRCw(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRCw)
+#define G_BCM1480_MC_tRCw(x) _SB_GETVALUE(x, S_BCM1480_MC_tRCw, M_BCM1480_MC_tRCw)
+#define K_BCM1480_MC_tRCw_DEFAULT 10
+#define V_BCM1480_MC_tRCw_DEFAULT V_BCM1480_MC_tRCw(K_BCM1480_MC_tRCw_DEFAULT)
+
+#define S_BCM1480_MC_tRCr 32
+#define M_BCM1480_MC_tRCr _SB_MAKEMASK(5, S_BCM1480_MC_tRCr)
+#define V_BCM1480_MC_tRCr(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRCr)
+#define G_BCM1480_MC_tRCr(x) _SB_GETVALUE(x, S_BCM1480_MC_tRCr, M_BCM1480_MC_tRCr)
+#define K_BCM1480_MC_tRCr_DEFAULT 9
+#define V_BCM1480_MC_tRCr_DEFAULT V_BCM1480_MC_tRCr(K_BCM1480_MC_tRCr_DEFAULT)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_tFAW 40
+#define M_BCM1480_MC_tFAW _SB_MAKEMASK(6, S_BCM1480_MC_tFAW)
+#define V_BCM1480_MC_tFAW(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tFAW)
+#define G_BCM1480_MC_tFAW(x) _SB_GETVALUE(x, S_BCM1480_MC_tFAW, M_BCM1480_MC_tFAW)
+#define K_BCM1480_MC_tFAW_DEFAULT 0
+#define V_BCM1480_MC_tFAW_DEFAULT V_BCM1480_MC_tFAW(K_BCM1480_MC_tFAW_DEFAULT)
+#endif
+
+#define S_BCM1480_MC_tRFC 48
+#define M_BCM1480_MC_tRFC _SB_MAKEMASK(7, S_BCM1480_MC_tRFC)
+#define V_BCM1480_MC_tRFC(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRFC)
+#define G_BCM1480_MC_tRFC(x) _SB_GETVALUE(x, S_BCM1480_MC_tRFC, M_BCM1480_MC_tRFC)
+#define K_BCM1480_MC_tRFC_DEFAULT 12
+#define V_BCM1480_MC_tRFC_DEFAULT V_BCM1480_MC_tRFC(K_BCM1480_MC_tRFC_DEFAULT)
+
+#define S_BCM1480_MC_tFIFO 56
+#define M_BCM1480_MC_tFIFO _SB_MAKEMASK(2, S_BCM1480_MC_tFIFO)
+#define V_BCM1480_MC_tFIFO(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tFIFO)
+#define G_BCM1480_MC_tFIFO(x) _SB_GETVALUE(x, S_BCM1480_MC_tFIFO, M_BCM1480_MC_tFIFO)
+#define K_BCM1480_MC_tFIFO_DEFAULT 0
+#define V_BCM1480_MC_tFIFO_DEFAULT V_BCM1480_MC_tFIFO(K_BCM1480_MC_tFIFO_DEFAULT)
+
+#define S_BCM1480_MC_tW2R 58
+#define M_BCM1480_MC_tW2R _SB_MAKEMASK(2, S_BCM1480_MC_tW2R)
+#define V_BCM1480_MC_tW2R(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tW2R)
+#define G_BCM1480_MC_tW2R(x) _SB_GETVALUE(x, S_BCM1480_MC_tW2R, M_BCM1480_MC_tW2R)
+#define K_BCM1480_MC_tW2R_DEFAULT 1
+#define V_BCM1480_MC_tW2R_DEFAULT V_BCM1480_MC_tW2R(K_BCM1480_MC_tW2R_DEFAULT)
+
+#define S_BCM1480_MC_tR2W 60
+#define M_BCM1480_MC_tR2W _SB_MAKEMASK(2, S_BCM1480_MC_tR2W)
+#define V_BCM1480_MC_tR2W(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tR2W)
+#define G_BCM1480_MC_tR2W(x) _SB_GETVALUE(x, S_BCM1480_MC_tR2W, M_BCM1480_MC_tR2W)
+#define K_BCM1480_MC_tR2W_DEFAULT 0
+#define V_BCM1480_MC_tR2W_DEFAULT V_BCM1480_MC_tR2W(K_BCM1480_MC_tR2W_DEFAULT)
+
+#define M_BCM1480_MC_tR2R _SB_MAKEMASK1(62)
+
+#define V_BCM1480_MC_TIMING_DEFAULT (M_BCM1480_MC_tR2R | \
+ V_BCM1480_MC_tFIFO_DEFAULT | \
+ V_BCM1480_MC_tR2W_DEFAULT | \
+ V_BCM1480_MC_tW2R_DEFAULT | \
+ V_BCM1480_MC_tRFC_DEFAULT | \
+ V_BCM1480_MC_tRCr_DEFAULT | \
+ V_BCM1480_MC_tRCw_DEFAULT | \
+ V_BCM1480_MC_tRRD_DEFAULT | \
+ V_BCM1480_MC_tRP_DEFAULT | \
+ V_BCM1480_MC_tCwD_DEFAULT | \
+ V_BCM1480_MC_tWR_DEFAULT | \
+ M_BCM1480_MC_tCrDh | \
+ V_BCM1480_MC_tCL_DEFAULT | \
+ V_BCM1480_MC_tRCD_DEFAULT)
+
+/*
+ * SDRAM Timing Register 2
+ */
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+
+#define S_BCM1480_MC_tAL 0
+#define M_BCM1480_MC_tAL _SB_MAKEMASK(4, S_BCM1480_MC_tAL)
+#define V_BCM1480_MC_tAL(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tAL)
+#define G_BCM1480_MC_tAL(x) _SB_GETVALUE(x, S_BCM1480_MC_tAL, M_BCM1480_MC_tAL)
+#define K_BCM1480_MC_tAL_DEFAULT 0
+#define V_BCM1480_MC_tAL_DEFAULT V_BCM1480_MC_tAL(K_BCM1480_MC_tAL_DEFAULT)
+
+#define S_BCM1480_MC_tRTP 4
+#define M_BCM1480_MC_tRTP _SB_MAKEMASK(3, S_BCM1480_MC_tRTP)
+#define V_BCM1480_MC_tRTP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRTP)
+#define G_BCM1480_MC_tRTP(x) _SB_GETVALUE(x, S_BCM1480_MC_tRTP, M_BCM1480_MC_tRTP)
+#define K_BCM1480_MC_tRTP_DEFAULT 2
+#define V_BCM1480_MC_tRTP_DEFAULT V_BCM1480_MC_tRTP(K_BCM1480_MC_tRTP_DEFAULT)
+
+#define S_BCM1480_MC_tW2W 8
+#define M_BCM1480_MC_tW2W _SB_MAKEMASK(2, S_BCM1480_MC_tW2W)
+#define V_BCM1480_MC_tW2W(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tW2W)
+#define G_BCM1480_MC_tW2W(x) _SB_GETVALUE(x, S_BCM1480_MC_tW2W, M_BCM1480_MC_tW2W)
+#define K_BCM1480_MC_tW2W_DEFAULT 0
+#define V_BCM1480_MC_tW2W_DEFAULT V_BCM1480_MC_tW2W(K_BCM1480_MC_tW2W_DEFAULT)
+
+#define S_BCM1480_MC_tRAP 12
+#define M_BCM1480_MC_tRAP _SB_MAKEMASK(4, S_BCM1480_MC_tRAP)
+#define V_BCM1480_MC_tRAP(x) _SB_MAKEVALUE(x, S_BCM1480_MC_tRAP)
+#define G_BCM1480_MC_tRAP(x) _SB_GETVALUE(x, S_BCM1480_MC_tRAP, M_BCM1480_MC_tRAP)
+#define K_BCM1480_MC_tRAP_DEFAULT 0
+#define V_BCM1480_MC_tRAP_DEFAULT V_BCM1480_MC_tRAP(K_BCM1480_MC_tRAP_DEFAULT)
+
+#endif
+
+
+
+/*
+ * Global Registers: single instances per BCM1480
+ */
+
+/*
+ * Global Configuration Register (Table 99)
+ */
+
+#define S_BCM1480_MC_BLK_SET_MARK 8
+#define M_BCM1480_MC_BLK_SET_MARK _SB_MAKEMASK(4, S_BCM1480_MC_BLK_SET_MARK)
+#define V_BCM1480_MC_BLK_SET_MARK(x) _SB_MAKEVALUE(x, S_BCM1480_MC_BLK_SET_MARK)
+#define G_BCM1480_MC_BLK_SET_MARK(x) _SB_GETVALUE(x, S_BCM1480_MC_BLK_SET_MARK, M_BCM1480_MC_BLK_SET_MARK)
+
+#define S_BCM1480_MC_BLK_CLR_MARK 12
+#define M_BCM1480_MC_BLK_CLR_MARK _SB_MAKEMASK(4, S_BCM1480_MC_BLK_CLR_MARK)
+#define V_BCM1480_MC_BLK_CLR_MARK(x) _SB_MAKEVALUE(x, S_BCM1480_MC_BLK_CLR_MARK)
+#define G_BCM1480_MC_BLK_CLR_MARK(x) _SB_GETVALUE(x, S_BCM1480_MC_BLK_CLR_MARK, M_BCM1480_MC_BLK_CLR_MARK)
+
+#define M_BCM1480_MC_PKT_PRIORITY _SB_MAKEMASK1(16)
+
+#define S_BCM1480_MC_MAX_AGE 20
+#define M_BCM1480_MC_MAX_AGE _SB_MAKEMASK(4, S_BCM1480_MC_MAX_AGE)
+#define V_BCM1480_MC_MAX_AGE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_MAX_AGE)
+#define G_BCM1480_MC_MAX_AGE(x) _SB_GETVALUE(x, S_BCM1480_MC_MAX_AGE, M_BCM1480_MC_MAX_AGE)
+
+#define M_BCM1480_MC_BERR_DISABLE _SB_MAKEMASK1(29)
+#define M_BCM1480_MC_FORCE_SEQ _SB_MAKEMASK1(30)
+#define M_BCM1480_MC_VGEN _SB_MAKEMASK1(32)
+
+#define S_BCM1480_MC_SLEW 33
+#define M_BCM1480_MC_SLEW _SB_MAKEMASK(2, S_BCM1480_MC_SLEW)
+#define V_BCM1480_MC_SLEW(x) _SB_MAKEVALUE(x, S_BCM1480_MC_SLEW)
+#define G_BCM1480_MC_SLEW(x) _SB_GETVALUE(x, S_BCM1480_MC_SLEW, M_BCM1480_MC_SLEW)
+
+#define M_BCM1480_MC_SSTL_VOLTAGE _SB_MAKEMASK1(35)
+
+/*
+ * Global Channel Interleave Register (Table 100)
+ */
+
+#define S_BCM1480_MC_INTLV0 0
+#define M_BCM1480_MC_INTLV0 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV0)
+#define V_BCM1480_MC_INTLV0(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV0)
+#define G_BCM1480_MC_INTLV0(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV0, M_BCM1480_MC_INTLV0)
+
+#define S_BCM1480_MC_INTLV1 8
+#define M_BCM1480_MC_INTLV1 _SB_MAKEMASK(6, S_BCM1480_MC_INTLV1)
+#define V_BCM1480_MC_INTLV1(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV1)
+#define G_BCM1480_MC_INTLV1(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV1, M_BCM1480_MC_INTLV1)
+
+#define S_BCM1480_MC_INTLV_MODE 16
+#define M_BCM1480_MC_INTLV_MODE _SB_MAKEMASK(3, S_BCM1480_MC_INTLV_MODE)
+#define V_BCM1480_MC_INTLV_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_MC_INTLV_MODE)
+#define G_BCM1480_MC_INTLV_MODE(x) _SB_GETVALUE(x, S_BCM1480_MC_INTLV_MODE, M_BCM1480_MC_INTLV_MODE)
+
+#define K_BCM1480_MC_INTLV_MODE_NONE 0x0
+#define K_BCM1480_MC_INTLV_MODE_01 0x1
+#define K_BCM1480_MC_INTLV_MODE_23 0x2
+#define K_BCM1480_MC_INTLV_MODE_01_23 0x3
+#define K_BCM1480_MC_INTLV_MODE_0123 0x4
+
+#define V_BCM1480_MC_INTLV_MODE_NONE V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_NONE)
+#define V_BCM1480_MC_INTLV_MODE_01 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_01)
+#define V_BCM1480_MC_INTLV_MODE_23 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_23)
+#define V_BCM1480_MC_INTLV_MODE_01_23 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_01_23)
+#define V_BCM1480_MC_INTLV_MODE_0123 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_0123)
+
+/*
+ * ECC Status Register
+ */
+
+#define S_BCM1480_MC_ECC_ERR_ADDR 0
+#define M_BCM1480_MC_ECC_ERR_ADDR _SB_MAKEMASK(37, S_BCM1480_MC_ECC_ERR_ADDR)
+#define V_BCM1480_MC_ECC_ERR_ADDR(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ECC_ERR_ADDR)
+#define G_BCM1480_MC_ECC_ERR_ADDR(x) _SB_GETVALUE(x, S_BCM1480_MC_ECC_ERR_ADDR, M_BCM1480_MC_ECC_ERR_ADDR)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define M_BCM1480_MC_ECC_ERR_RMW _SB_MAKEMASK1(60)
+#endif
+
+#define M_BCM1480_MC_ECC_MULT_ERR_DET _SB_MAKEMASK1(61)
+#define M_BCM1480_MC_ECC_UERR_DET _SB_MAKEMASK1(62)
+#define M_BCM1480_MC_ECC_CERR_DET _SB_MAKEMASK1(63)
+
+/*
+ * Global ECC Address Register (Table 102)
+ */
+
+#define S_BCM1480_MC_ECC_CORR_ADDR 0
+#define M_BCM1480_MC_ECC_CORR_ADDR _SB_MAKEMASK(37, S_BCM1480_MC_ECC_CORR_ADDR)
+#define V_BCM1480_MC_ECC_CORR_ADDR(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ECC_CORR_ADDR)
+#define G_BCM1480_MC_ECC_CORR_ADDR(x) _SB_GETVALUE(x, S_BCM1480_MC_ECC_CORR_ADDR, M_BCM1480_MC_ECC_CORR_ADDR)
+
+/*
+ * Global ECC Correction Register (Table 103)
+ */
+
+#define S_BCM1480_MC_ECC_CORRECT 0
+#define M_BCM1480_MC_ECC_CORRECT _SB_MAKEMASK(64, S_BCM1480_MC_ECC_CORRECT)
+#define V_BCM1480_MC_ECC_CORRECT(x) _SB_MAKEVALUE(x, S_BCM1480_MC_ECC_CORRECT)
+#define G_BCM1480_MC_ECC_CORRECT(x) _SB_GETVALUE(x, S_BCM1480_MC_ECC_CORRECT, M_BCM1480_MC_ECC_CORRECT)
+
+/*
+ * Global ECC Performance Counters Control Register (Table 104)
+ */
+
+#define S_BCM1480_MC_CHANNEL_SELECT 0
+#define M_BCM1480_MC_CHANNEL_SELECT _SB_MAKEMASK(4, S_BCM1480_MC_CHANNEL_SELECT)
+#define V_BCM1480_MC_CHANNEL_SELECT(x) _SB_MAKEVALUE(x, S_BCM1480_MC_CHANNEL_SELECT)
+#define G_BCM1480_MC_CHANNEL_SELECT(x) _SB_GETVALUE(x, S_BCM1480_MC_CHANNEL_SELECT, M_BCM1480_MC_CHANNEL_SELECT)
+#define K_BCM1480_MC_CHANNEL_SELECT_0 0x1
+#define K_BCM1480_MC_CHANNEL_SELECT_1 0x2
+#define K_BCM1480_MC_CHANNEL_SELECT_2 0x4
+#define K_BCM1480_MC_CHANNEL_SELECT_3 0x8
+
+#endif /* _BCM1480_MC_H */
diff --git a/arch/mips/include/asm/sibyte/bcm1480_regs.h b/arch/mips/include/asm/sibyte/bcm1480_regs.h
new file mode 100644
index 00000000000..b4077bb7261
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/bcm1480_regs.h
@@ -0,0 +1,902 @@
+/* *********************************************************************
+ * BCM1255/BCM1280/BCM1455/BCM1480 Board Support Package
+ *
+ * Register Definitions File: bcm1480_regs.h
+ *
+ * This module contains the addresses of the on-chip peripherals
+ * on the BCM1280 and BCM1480.
+ *
+ * BCM1480 specification level: 1X55_1X80-UM100-D4 (11/24/03)
+ *
+ *********************************************************************
+ *
+ * Copyright 2000,2001,2002,2003
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+#ifndef _BCM1480_REGS_H
+#define _BCM1480_REGS_H
+
+#include "sb1250_defs.h"
+
+/* *********************************************************************
+ * Pull in the BCM1250's registers since a great deal of the 1480's
+ * functions are the same as the BCM1250.
+ ********************************************************************* */
+
+#include "sb1250_regs.h"
+
+
+/* *********************************************************************
+ * Some general notes:
+ *
+ * Register addresses are grouped by function and follow the order
+ * of the User Manual.
+ *
+ * For the most part, when there is more than one peripheral
+ * of the same type on the SOC, the constants below will be
+ * offsets from the base of each peripheral. For example,
+ * the MAC registers are described as offsets from the first
+ * MAC register, and there will be a MAC_REGISTER() macro
+ * to calculate the base address of a given MAC.
+ *
+ * The information in this file is based on the BCM1X55/BCM1X80
+ * User Manual, Document 1X55_1X80-UM100-R, 22/12/03.
+ *
+ * This file is basically a "what's new" header file. Since the
+ * BCM1250 and the new BCM1480 (and derivatives) share many common
+ * features, this file contains only what's new or changed from
+ * the 1250. (above, you can see that we include the 1250 symbols
+ * to get the base functionality).
+ *
+ * In software, be sure to use the correct symbols, particularly
+ * for blocks that are different between the two chip families.
+ * All BCM1480-specific symbols have _BCM1480_ in their names,
+ * and all BCM1250-specific and "base" functions that are common in
+ * both chips have no special names (this is for compatibility with
+ * older include files). Therefore, if you're working with the
+ * SCD, which is very different on each chip, A_SCD_xxx implies
+ * the BCM1250 version and A_BCM1480_SCD_xxx implies the BCM1480
+ * version.
+ ********************************************************************* */
+
+
+/* *********************************************************************
+ * Memory Controller Registers (Section 6)
+ ********************************************************************* */
+
+#define A_BCM1480_MC_BASE_0 0x0010050000
+#define A_BCM1480_MC_BASE_1 0x0010051000
+#define A_BCM1480_MC_BASE_2 0x0010052000
+#define A_BCM1480_MC_BASE_3 0x0010053000
+#define BCM1480_MC_REGISTER_SPACING 0x1000
+
+#define A_BCM1480_MC_BASE(ctlid) (A_BCM1480_MC_BASE_0+(ctlid)*BCM1480_MC_REGISTER_SPACING)
+#define A_BCM1480_MC_REGISTER(ctlid, reg) (A_BCM1480_MC_BASE(ctlid)+(reg))
+
+#define R_BCM1480_MC_CONFIG 0x0000000100
+#define R_BCM1480_MC_CS_START 0x0000000120
+#define R_BCM1480_MC_CS_END 0x0000000140
+#define S_BCM1480_MC_CS_STARTEND 24
+
+#define R_BCM1480_MC_CS01_ROW0 0x0000000180
+#define R_BCM1480_MC_CS01_ROW1 0x00000001A0
+#define R_BCM1480_MC_CS23_ROW0 0x0000000200
+#define R_BCM1480_MC_CS23_ROW1 0x0000000220
+#define R_BCM1480_MC_CS01_COL0 0x0000000280
+#define R_BCM1480_MC_CS01_COL1 0x00000002A0
+#define R_BCM1480_MC_CS23_COL0 0x0000000300
+#define R_BCM1480_MC_CS23_COL1 0x0000000320
+
+#define R_BCM1480_MC_CSX_BASE 0x0000000180
+#define R_BCM1480_MC_CSX_ROW0 0x0000000000 /* relative to CSX_BASE */
+#define R_BCM1480_MC_CSX_ROW1 0x0000000020 /* relative to CSX_BASE */
+#define R_BCM1480_MC_CSX_COL0 0x0000000100 /* relative to CSX_BASE */
+#define R_BCM1480_MC_CSX_COL1 0x0000000120 /* relative to CSX_BASE */
+#define BCM1480_MC_CSX_SPACING 0x0000000080 /* CS23 relative to CS01 */
+
+#define R_BCM1480_MC_CS01_BA 0x0000000380
+#define R_BCM1480_MC_CS23_BA 0x00000003A0
+#define R_BCM1480_MC_DRAMCMD 0x0000000400
+#define R_BCM1480_MC_DRAMMODE 0x0000000420
+#define R_BCM1480_MC_CLOCK_CFG 0x0000000440
+#define R_BCM1480_MC_MCLK_CFG R_BCM1480_MC_CLOCK_CFG
+#define R_BCM1480_MC_TEST_DATA 0x0000000480
+#define R_BCM1480_MC_TEST_ECC 0x00000004A0
+#define R_BCM1480_MC_TIMING1 0x00000004C0
+#define R_BCM1480_MC_TIMING2 0x00000004E0
+#define R_BCM1480_MC_DLL_CFG 0x0000000500
+#define R_BCM1480_MC_DRIVE_CFG 0x0000000520
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define R_BCM1480_MC_ODT 0x0000000460
+#define R_BCM1480_MC_ECC_STATUS 0x0000000540
+#endif
+
+/* Global registers (single instance) */
+#define A_BCM1480_MC_GLB_CONFIG 0x0010054100
+#define A_BCM1480_MC_GLB_INTLV 0x0010054120
+#define A_BCM1480_MC_GLB_ECC_STATUS 0x0010054140
+#define A_BCM1480_MC_GLB_ECC_ADDR 0x0010054160
+#define A_BCM1480_MC_GLB_ECC_CORRECT 0x0010054180
+#define A_BCM1480_MC_GLB_PERF_CNT_CONTROL 0x00100541A0
+
+/* *********************************************************************
+ * L2 Cache Control Registers (Section 5)
+ ********************************************************************* */
+
+#define A_BCM1480_L2_BASE 0x0010040000
+
+#define A_BCM1480_L2_READ_TAG 0x0010040018
+#define A_BCM1480_L2_ECC_TAG 0x0010040038
+#define A_BCM1480_L2_MISC0_VALUE 0x0010040058
+#define A_BCM1480_L2_MISC1_VALUE 0x0010040078
+#define A_BCM1480_L2_MISC2_VALUE 0x0010040098
+#define A_BCM1480_L2_MISC_CONFIG 0x0010040040 /* x040 */
+#define A_BCM1480_L2_CACHE_DISABLE 0x0010040060 /* x060 */
+#define A_BCM1480_L2_MAKECACHEDISABLE(x) (A_BCM1480_L2_CACHE_DISABLE | (((x)&0xF) << 12))
+#define A_BCM1480_L2_WAY_ENABLE_3_0 0x0010040080 /* x080 */
+#define A_BCM1480_L2_WAY_ENABLE_7_4 0x00100400A0 /* x0A0 */
+#define A_BCM1480_L2_MAKE_WAY_ENABLE_LO(x) (A_BCM1480_L2_WAY_ENABLE_3_0 | (((x)&0xF) << 12))
+#define A_BCM1480_L2_MAKE_WAY_ENABLE_HI(x) (A_BCM1480_L2_WAY_ENABLE_7_4 | (((x)&0xF) << 12))
+#define A_BCM1480_L2_MAKE_WAY_DISABLE_LO(x) (A_BCM1480_L2_WAY_ENABLE_3_0 | (((~x)&0xF) << 12))
+#define A_BCM1480_L2_MAKE_WAY_DISABLE_HI(x) (A_BCM1480_L2_WAY_ENABLE_7_4 | (((~x)&0xF) << 12))
+#define A_BCM1480_L2_WAY_LOCAL_3_0 0x0010040100 /* x100 */
+#define A_BCM1480_L2_WAY_LOCAL_7_4 0x0010040120 /* x120 */
+#define A_BCM1480_L2_WAY_REMOTE_3_0 0x0010040140 /* x140 */
+#define A_BCM1480_L2_WAY_REMOTE_7_4 0x0010040160 /* x160 */
+#define A_BCM1480_L2_WAY_AGENT_3_0 0x00100400C0 /* xxC0 */
+#define A_BCM1480_L2_WAY_AGENT_7_4 0x00100400E0 /* xxE0 */
+#define A_BCM1480_L2_WAY_ENABLE(A, banks) (A | (((~(banks))&0x0F) << 8))
+#define A_BCM1480_L2_BANK_BASE 0x00D0300000
+#define A_BCM1480_L2_BANK_ADDRESS(b) (A_BCM1480_L2_BANK_BASE | (((b)&0x7)<<17))
+#define A_BCM1480_L2_MGMT_TAG_BASE 0x00D0000000
+
+
+/* *********************************************************************
+ * PCI-X Interface Registers (Section 7)
+ ********************************************************************* */
+
+#define A_BCM1480_PCI_BASE 0x0010061400
+
+#define A_BCM1480_PCI_RESET 0x0010061400
+#define A_BCM1480_PCI_DLL 0x0010061500
+
+#define A_BCM1480_PCI_TYPE00_HEADER 0x002E000000
+
+/* *********************************************************************
+ * Ethernet MAC Registers (Section 11) and DMA Registers (Section 10.6)
+ ********************************************************************* */
+
+/* No register changes with Rev.C BCM1250, but one additional MAC */
+
+#define A_BCM1480_MAC_BASE_2 0x0010066000
+
+#ifndef A_MAC_BASE_2
+#define A_MAC_BASE_2 A_BCM1480_MAC_BASE_2
+#endif
+
+#define A_BCM1480_MAC_BASE_3 0x0010067000
+#define A_MAC_BASE_3 A_BCM1480_MAC_BASE_3
+
+#define R_BCM1480_MAC_DMA_OODPKTLOST 0x00000038
+
+#ifndef R_MAC_DMA_OODPKTLOST
+#define R_MAC_DMA_OODPKTLOST R_BCM1480_MAC_DMA_OODPKTLOST
+#endif
+
+
+/* *********************************************************************
+ * DUART Registers (Section 14)
+ ********************************************************************* */
+
+/* No significant differences from BCM1250, two DUARTs */
+
+/* Conventions, per user manual:
+ * DUART generic, channels A,B,C,D
+ * DUART0 implementing channels A,B
+ * DUART1 inplementing channels C,D
+ */
+
+#define BCM1480_DUART_NUM_PORTS 4
+
+#define A_BCM1480_DUART0 0x0010060000
+#define A_BCM1480_DUART1 0x0010060400
+#define A_BCM1480_DUART(chan) ((((chan)&2) == 0)? A_BCM1480_DUART0 : A_BCM1480_DUART1)
+
+#define BCM1480_DUART_CHANREG_SPACING 0x100
+#define A_BCM1480_DUART_CHANREG(chan, reg) \
+ (A_BCM1480_DUART(chan) + \
+ BCM1480_DUART_CHANREG_SPACING * (((chan) & 1) + 1) + (reg))
+#define A_BCM1480_DUART_CTRLREG(chan, reg) \
+ (A_BCM1480_DUART(chan) + \
+ BCM1480_DUART_CHANREG_SPACING * 3 + (reg))
+
+#define DUART_IMRISR_SPACING 0x20
+#define DUART_INCHNG_SPACING 0x10
+
+#define R_BCM1480_DUART_IMRREG(chan) \
+ (R_DUART_IMR_A + ((chan) & 1) * DUART_IMRISR_SPACING)
+#define R_BCM1480_DUART_ISRREG(chan) \
+ (R_DUART_ISR_A + ((chan) & 1) * DUART_IMRISR_SPACING)
+#define R_BCM1480_DUART_INCHREG(chan) \
+ (R_DUART_IN_CHNG_A + ((chan) & 1) * DUART_INCHNG_SPACING)
+
+#define A_BCM1480_DUART_IMRREG(chan) \
+ (A_BCM1480_DUART_CTRLREG((chan), R_BCM1480_DUART_IMRREG(chan)))
+#define A_BCM1480_DUART_ISRREG(chan) \
+ (A_BCM1480_DUART_CTRLREG((chan), R_BCM1480_DUART_ISRREG(chan)))
+
+#define A_BCM1480_DUART_IN_PORT(chan) \
+ (A_BCM1480_DUART_CTRLREG((chan), R_DUART_IN_PORT))
+
+/*
+ * These constants are the absolute addresses.
+ */
+
+#define A_BCM1480_DUART_MODE_REG_1_C 0x0010060400
+#define A_BCM1480_DUART_MODE_REG_2_C 0x0010060410
+#define A_BCM1480_DUART_STATUS_C 0x0010060420
+#define A_BCM1480_DUART_CLK_SEL_C 0x0010060430
+#define A_BCM1480_DUART_FULL_CTL_C 0x0010060440
+#define A_BCM1480_DUART_CMD_C 0x0010060450
+#define A_BCM1480_DUART_RX_HOLD_C 0x0010060460
+#define A_BCM1480_DUART_TX_HOLD_C 0x0010060470
+#define A_BCM1480_DUART_OPCR_C 0x0010060480
+#define A_BCM1480_DUART_AUX_CTRL_C 0x0010060490
+
+#define A_BCM1480_DUART_MODE_REG_1_D 0x0010060500
+#define A_BCM1480_DUART_MODE_REG_2_D 0x0010060510
+#define A_BCM1480_DUART_STATUS_D 0x0010060520
+#define A_BCM1480_DUART_CLK_SEL_D 0x0010060530
+#define A_BCM1480_DUART_FULL_CTL_D 0x0010060540
+#define A_BCM1480_DUART_CMD_D 0x0010060550
+#define A_BCM1480_DUART_RX_HOLD_D 0x0010060560
+#define A_BCM1480_DUART_TX_HOLD_D 0x0010060570
+#define A_BCM1480_DUART_OPCR_D 0x0010060580
+#define A_BCM1480_DUART_AUX_CTRL_D 0x0010060590
+
+#define A_BCM1480_DUART_INPORT_CHNG_CD 0x0010060600
+#define A_BCM1480_DUART_AUX_CTRL_CD 0x0010060610
+#define A_BCM1480_DUART_ISR_C 0x0010060620
+#define A_BCM1480_DUART_IMR_C 0x0010060630
+#define A_BCM1480_DUART_ISR_D 0x0010060640
+#define A_BCM1480_DUART_IMR_D 0x0010060650
+#define A_BCM1480_DUART_OUT_PORT_CD 0x0010060660
+#define A_BCM1480_DUART_OPCR_CD 0x0010060670
+#define A_BCM1480_DUART_IN_PORT_CD 0x0010060680
+#define A_BCM1480_DUART_ISR_CD 0x0010060690
+#define A_BCM1480_DUART_IMR_CD 0x00100606A0
+#define A_BCM1480_DUART_SET_OPR_CD 0x00100606B0
+#define A_BCM1480_DUART_CLEAR_OPR_CD 0x00100606C0
+#define A_BCM1480_DUART_INPORT_CHNG_C 0x00100606D0
+#define A_BCM1480_DUART_INPORT_CHNG_D 0x00100606E0
+
+
+/* *********************************************************************
+ * Generic Bus Registers (Section 15) and PCMCIA Registers (Section 16)
+ ********************************************************************* */
+
+#define A_BCM1480_IO_PCMCIA_CFG_B 0x0010061A58
+#define A_BCM1480_IO_PCMCIA_STATUS_B 0x0010061A68
+
+/* *********************************************************************
+ * GPIO Registers (Section 17)
+ ********************************************************************* */
+
+/* One additional GPIO register, placed _before_ the BCM1250's GPIO block base */
+
+#define A_BCM1480_GPIO_INT_ADD_TYPE 0x0010061A78
+#define R_BCM1480_GPIO_INT_ADD_TYPE (-8)
+
+#define A_GPIO_INT_ADD_TYPE A_BCM1480_GPIO_INT_ADD_TYPE
+#define R_GPIO_INT_ADD_TYPE R_BCM1480_GPIO_INT_ADD_TYPE
+
+/* *********************************************************************
+ * SMBus Registers (Section 18)
+ ********************************************************************* */
+
+/* No changes from BCM1250 */
+
+/* *********************************************************************
+ * Timer Registers (Sections 4.6)
+ ********************************************************************* */
+
+/* BCM1480 has two additional watchdogs */
+
+/* Watchdog timers */
+
+#define A_BCM1480_SCD_WDOG_2 0x0010022050
+#define A_BCM1480_SCD_WDOG_3 0x0010022150
+
+#define BCM1480_SCD_NUM_WDOGS 4
+
+#define A_BCM1480_SCD_WDOG_BASE(w) (A_BCM1480_SCD_WDOG_0+((w)&2)*0x1000 + ((w)&1)*0x100)
+#define A_BCM1480_SCD_WDOG_REGISTER(w, r) (A_BCM1480_SCD_WDOG_BASE(w) + (r))
+
+#define A_BCM1480_SCD_WDOG_INIT_2 0x0010022050
+#define A_BCM1480_SCD_WDOG_CNT_2 0x0010022058
+#define A_BCM1480_SCD_WDOG_CFG_2 0x0010022060
+
+#define A_BCM1480_SCD_WDOG_INIT_3 0x0010022150
+#define A_BCM1480_SCD_WDOG_CNT_3 0x0010022158
+#define A_BCM1480_SCD_WDOG_CFG_3 0x0010022160
+
+/* BCM1480 has two additional compare registers */
+
+#define A_BCM1480_SCD_ZBBUS_CYCLE_COUNT A_SCD_ZBBUS_CYCLE_COUNT
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP_BASE 0x0010020C00
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP0 A_SCD_ZBBUS_CYCLE_CP0
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP1 A_SCD_ZBBUS_CYCLE_CP1
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP2 0x0010020C10
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP3 0x0010020C18
+
+/* *********************************************************************
+ * System Control Registers (Section 4.2)
+ ********************************************************************* */
+
+/* Scratch register in different place */
+
+#define A_BCM1480_SCD_SCRATCH 0x100200A0
+
+/* *********************************************************************
+ * System Address Trap Registers (Section 4.9)
+ ********************************************************************* */
+
+/* No changes from BCM1250 */
+
+/* *********************************************************************
+ * System Interrupt Mapper Registers (Sections 4.3-4.5)
+ ********************************************************************* */
+
+#define A_BCM1480_IMR_CPU0_BASE 0x0010020000
+#define A_BCM1480_IMR_CPU1_BASE 0x0010022000
+#define A_BCM1480_IMR_CPU2_BASE 0x0010024000
+#define A_BCM1480_IMR_CPU3_BASE 0x0010026000
+#define BCM1480_IMR_REGISTER_SPACING 0x2000
+#define BCM1480_IMR_REGISTER_SPACING_SHIFT 13
+
+#define A_BCM1480_IMR_MAPPER(cpu) (A_BCM1480_IMR_CPU0_BASE+(cpu)*BCM1480_IMR_REGISTER_SPACING)
+#define A_BCM1480_IMR_REGISTER(cpu, reg) (A_BCM1480_IMR_MAPPER(cpu)+(reg))
+
+/* Most IMR registers are 128 bits, implemented as non-contiguous
+ 64-bit registers high (_H) and low (_L) */
+#define BCM1480_IMR_HL_SPACING 0x1000
+
+#define R_BCM1480_IMR_INTERRUPT_DIAG_H 0x0010
+#define R_BCM1480_IMR_LDT_INTERRUPT_H 0x0018
+#define R_BCM1480_IMR_LDT_INTERRUPT_CLR_H 0x0020
+#define R_BCM1480_IMR_INTERRUPT_MASK_H 0x0028
+#define R_BCM1480_IMR_INTERRUPT_TRACE_H 0x0038
+#define R_BCM1480_IMR_INTERRUPT_SOURCE_STATUS_H 0x0040
+#define R_BCM1480_IMR_LDT_INTERRUPT_SET 0x0048
+#define R_BCM1480_IMR_MAILBOX_0_CPU 0x00C0
+#define R_BCM1480_IMR_MAILBOX_0_SET_CPU 0x00C8
+#define R_BCM1480_IMR_MAILBOX_0_CLR_CPU 0x00D0
+#define R_BCM1480_IMR_MAILBOX_1_CPU 0x00E0
+#define R_BCM1480_IMR_MAILBOX_1_SET_CPU 0x00E8
+#define R_BCM1480_IMR_MAILBOX_1_CLR_CPU 0x00F0
+#define R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H 0x0100
+#define BCM1480_IMR_INTERRUPT_STATUS_COUNT 8
+#define R_BCM1480_IMR_INTERRUPT_MAP_BASE_H 0x0200
+#define BCM1480_IMR_INTERRUPT_MAP_COUNT 64
+
+#define R_BCM1480_IMR_INTERRUPT_DIAG_L 0x1010
+#define R_BCM1480_IMR_LDT_INTERRUPT_L 0x1018
+#define R_BCM1480_IMR_LDT_INTERRUPT_CLR_L 0x1020
+#define R_BCM1480_IMR_INTERRUPT_MASK_L 0x1028
+#define R_BCM1480_IMR_INTERRUPT_TRACE_L 0x1038
+#define R_BCM1480_IMR_INTERRUPT_SOURCE_STATUS_L 0x1040
+#define R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L 0x1100
+#define R_BCM1480_IMR_INTERRUPT_MAP_BASE_L 0x1200
+
+#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU0_BASE 0x0010028000
+#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU1_BASE 0x0010028100
+#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU2_BASE 0x0010028200
+#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU3_BASE 0x0010028300
+#define BCM1480_IMR_ALIAS_MAILBOX_SPACING 0100
+
+#define A_BCM1480_IMR_ALIAS_MAILBOX(cpu) (A_BCM1480_IMR_ALIAS_MAILBOX_CPU0_BASE + \
+ (cpu)*BCM1480_IMR_ALIAS_MAILBOX_SPACING)
+#define A_BCM1480_IMR_ALIAS_MAILBOX_REGISTER(cpu, reg) (A_BCM1480_IMR_ALIAS_MAILBOX(cpu)+(reg))
+
+#define R_BCM1480_IMR_ALIAS_MAILBOX_0 0x0000 /* 0x0x0 */
+#define R_BCM1480_IMR_ALIAS_MAILBOX_0_SET 0x0008 /* 0x0x8 */
+
+/*
+ * these macros work together to build the address of a mailbox
+ * register, e.g., A_BCM1480_MAILBOX_REGISTER(0,R_BCM1480_IMR_MAILBOX_SET,2)
+ * for mbox_0_set_cpu2 returns 0x00100240C8
+ */
+#define R_BCM1480_IMR_MAILBOX_CPU 0x00
+#define R_BCM1480_IMR_MAILBOX_SET 0x08
+#define R_BCM1480_IMR_MAILBOX_CLR 0x10
+#define R_BCM1480_IMR_MAILBOX_NUM_SPACING 0x20
+#define A_BCM1480_MAILBOX_REGISTER(num, reg, cpu) \
+ (A_BCM1480_IMR_CPU0_BASE + \
+ (num * R_BCM1480_IMR_MAILBOX_NUM_SPACING) + \
+ (cpu * BCM1480_IMR_REGISTER_SPACING) + \
+ (R_BCM1480_IMR_MAILBOX_0_CPU + reg))
+
+/* *********************************************************************
+ * System Performance Counter Registers (Section 4.7)
+ ********************************************************************* */
+
+/* BCM1480 has four more performance counter registers, and two control
+ registers. */
+
+#define A_BCM1480_SCD_PERF_CNT_BASE 0x00100204C0
+
+#define A_BCM1480_SCD_PERF_CNT_CFG0 0x00100204C0
+#define A_BCM1480_SCD_PERF_CNT_CFG_0 A_BCM1480_SCD_PERF_CNT_CFG0
+#define A_BCM1480_SCD_PERF_CNT_CFG1 0x00100204C8
+#define A_BCM1480_SCD_PERF_CNT_CFG_1 A_BCM1480_SCD_PERF_CNT_CFG1
+
+#define A_BCM1480_SCD_PERF_CNT_0 A_SCD_PERF_CNT_0
+#define A_BCM1480_SCD_PERF_CNT_1 A_SCD_PERF_CNT_1
+#define A_BCM1480_SCD_PERF_CNT_2 A_SCD_PERF_CNT_2
+#define A_BCM1480_SCD_PERF_CNT_3 A_SCD_PERF_CNT_3
+
+#define A_BCM1480_SCD_PERF_CNT_4 0x00100204F0
+#define A_BCM1480_SCD_PERF_CNT_5 0x00100204F8
+#define A_BCM1480_SCD_PERF_CNT_6 0x0010020500
+#define A_BCM1480_SCD_PERF_CNT_7 0x0010020508
+
+#define BCM1480_SCD_NUM_PERF_CNT 8
+#define BCM1480_SCD_PERF_CNT_SPACING 8
+#define A_BCM1480_SCD_PERF_CNT(n) (A_SCD_PERF_CNT_0+(n*BCM1480_SCD_PERF_CNT_SPACING))
+
+/* *********************************************************************
+ * System Bus Watcher Registers (Section 4.8)
+ ********************************************************************* */
+
+
+/* Same as 1250 except BUS_ERR_STATUS_DEBUG is in a different place. */
+
+#define A_BCM1480_BUS_ERR_STATUS_DEBUG 0x00100208D8
+
+/* *********************************************************************
+ * System Debug Controller Registers (Section 19)
+ ********************************************************************* */
+
+/* Same as 1250 */
+
+/* *********************************************************************
+ * System Trace Unit Registers (Sections 4.10)
+ ********************************************************************* */
+
+/* Same as 1250 */
+
+/* *********************************************************************
+ * Data Mover DMA Registers (Section 10.7)
+ ********************************************************************* */
+
+/* Same as 1250 */
+
+
+/* *********************************************************************
+ * HyperTransport Interface Registers (Section 8)
+ ********************************************************************* */
+
+#define BCM1480_HT_NUM_PORTS 3
+#define BCM1480_HT_PORT_SPACING 0x800
+#define A_BCM1480_HT_PORT_HEADER(x) (A_BCM1480_HT_PORT0_HEADER + ((x)*BCM1480_HT_PORT_SPACING))
+
+#define A_BCM1480_HT_PORT0_HEADER 0x00FE000000
+#define A_BCM1480_HT_PORT1_HEADER 0x00FE000800
+#define A_BCM1480_HT_PORT2_HEADER 0x00FE001000
+#define A_BCM1480_HT_TYPE00_HEADER 0x00FE002000
+
+
+/* *********************************************************************
+ * Node Controller Registers (Section 9)
+ ********************************************************************* */
+
+#define A_BCM1480_NC_BASE 0x00DFBD0000
+
+#define A_BCM1480_NC_RLD_FIELD 0x00DFBD0000
+#define A_BCM1480_NC_RLD_TRIGGER 0x00DFBD0020
+#define A_BCM1480_NC_RLD_BAD_ERROR 0x00DFBD0040
+#define A_BCM1480_NC_RLD_COR_ERROR 0x00DFBD0060
+#define A_BCM1480_NC_RLD_ECC_STATUS 0x00DFBD0080
+#define A_BCM1480_NC_RLD_WAY_ENABLE 0x00DFBD00A0
+#define A_BCM1480_NC_RLD_RANDOM_LFSR 0x00DFBD00C0
+
+#define A_BCM1480_NC_INTERRUPT_STATUS 0x00DFBD00E0
+#define A_BCM1480_NC_INTERRUPT_ENABLE 0x00DFBD0100
+#define A_BCM1480_NC_TIMEOUT_COUNTER 0x00DFBD0120
+#define A_BCM1480_NC_TIMEOUT_COUNTER_SEL 0x00DFBD0140
+
+#define A_BCM1480_NC_CREDIT_STATUS_REG0 0x00DFBD0200
+#define A_BCM1480_NC_CREDIT_STATUS_REG1 0x00DFBD0220
+#define A_BCM1480_NC_CREDIT_STATUS_REG2 0x00DFBD0240
+#define A_BCM1480_NC_CREDIT_STATUS_REG3 0x00DFBD0260
+#define A_BCM1480_NC_CREDIT_STATUS_REG4 0x00DFBD0280
+#define A_BCM1480_NC_CREDIT_STATUS_REG5 0x00DFBD02A0
+#define A_BCM1480_NC_CREDIT_STATUS_REG6 0x00DFBD02C0
+#define A_BCM1480_NC_CREDIT_STATUS_REG7 0x00DFBD02E0
+#define A_BCM1480_NC_CREDIT_STATUS_REG8 0x00DFBD0300
+#define A_BCM1480_NC_CREDIT_STATUS_REG9 0x00DFBD0320
+#define A_BCM1480_NC_CREDIT_STATUS_REG10 0x00DFBE0000
+#define A_BCM1480_NC_CREDIT_STATUS_REG11 0x00DFBE0020
+#define A_BCM1480_NC_CREDIT_STATUS_REG12 0x00DFBE0040
+
+#define A_BCM1480_NC_SR_TIMEOUT_COUNTER 0x00DFBE0060
+#define A_BCM1480_NC_SR_TIMEOUT_COUNTER_SEL 0x00DFBE0080
+
+
+/* *********************************************************************
+ * H&R Block Configuration Registers (Section 12.4)
+ ********************************************************************* */
+
+#define A_BCM1480_HR_BASE_0 0x00DF820000
+#define A_BCM1480_HR_BASE_1 0x00DF8A0000
+#define A_BCM1480_HR_BASE_2 0x00DF920000
+#define BCM1480_HR_REGISTER_SPACING 0x80000
+
+#define A_BCM1480_HR_BASE(idx) (A_BCM1480_HR_BASE_0 + ((idx)*BCM1480_HR_REGISTER_SPACING))
+#define A_BCM1480_HR_REGISTER(idx, reg) (A_BCM1480_HR_BASE(idx) + (reg))
+
+#define R_BCM1480_HR_CFG 0x0000000000
+
+#define R_BCM1480_HR_MAPPING 0x0000010010
+
+#define BCM1480_HR_RULE_SPACING 0x0000000010
+#define BCM1480_HR_NUM_RULES 16
+#define BCM1480_HR_OP_OFFSET 0x0000000100
+#define BCM1480_HR_TYPE_OFFSET 0x0000000108
+#define R_BCM1480_HR_RULE_OP(idx) (BCM1480_HR_OP_OFFSET + ((idx)*BCM1480_HR_RULE_SPACING))
+#define R_BCM1480_HR_RULE_TYPE(idx) (BCM1480_HR_TYPE_OFFSET + ((idx)*BCM1480_HR_RULE_SPACING))
+
+#define BCM1480_HR_LEAF_SPACING 0x0000000010
+#define BCM1480_HR_NUM_LEAVES 10
+#define BCM1480_HR_LEAF_OFFSET 0x0000000300
+#define R_BCM1480_HR_HA_LEAF0(idx) (BCM1480_HR_LEAF_OFFSET + ((idx)*BCM1480_HR_LEAF_SPACING))
+
+#define R_BCM1480_HR_EX_LEAF0 0x00000003A0
+
+#define BCM1480_HR_PATH_SPACING 0x0000000010
+#define BCM1480_HR_NUM_PATHS 16
+#define BCM1480_HR_PATH_OFFSET 0x0000000600
+#define R_BCM1480_HR_PATH(idx) (BCM1480_HR_PATH_OFFSET + ((idx)*BCM1480_HR_PATH_SPACING))
+
+#define R_BCM1480_HR_PATH_DEFAULT 0x0000000700
+
+#define BCM1480_HR_ROUTE_SPACING 8
+#define BCM1480_HR_NUM_ROUTES 512
+#define BCM1480_HR_ROUTE_OFFSET 0x0000001000
+#define R_BCM1480_HR_RT_WORD(idx) (BCM1480_HR_ROUTE_OFFSET + ((idx)*BCM1480_HR_ROUTE_SPACING))
+
+
+/* checked to here - ehs */
+/* *********************************************************************
+ * Packet Manager DMA Registers (Section 12.5)
+ ********************************************************************* */
+
+#define A_BCM1480_PM_BASE 0x0010056000
+
+#define A_BCM1480_PMI_LCL_0 0x0010058000
+#define A_BCM1480_PMO_LCL_0 0x001005C000
+#define A_BCM1480_PMI_OFFSET_0 (A_BCM1480_PMI_LCL_0 - A_BCM1480_PM_BASE)
+#define A_BCM1480_PMO_OFFSET_0 (A_BCM1480_PMO_LCL_0 - A_BCM1480_PM_BASE)
+
+#define BCM1480_PM_LCL_REGISTER_SPACING 0x100
+#define BCM1480_PM_NUM_CHANNELS 32
+
+#define A_BCM1480_PMI_LCL_BASE(idx) (A_BCM1480_PMI_LCL_0 + ((idx)*BCM1480_PM_LCL_REGISTER_SPACING))
+#define A_BCM1480_PMI_LCL_REGISTER(idx, reg) (A_BCM1480_PMI_LCL_BASE(idx) + (reg))
+#define A_BCM1480_PMO_LCL_BASE(idx) (A_BCM1480_PMO_LCL_0 + ((idx)*BCM1480_PM_LCL_REGISTER_SPACING))
+#define A_BCM1480_PMO_LCL_REGISTER(idx, reg) (A_BCM1480_PMO_LCL_BASE(idx) + (reg))
+
+#define BCM1480_PM_INT_PACKING 8
+#define BCM1480_PM_INT_FUNCTION_SPACING 0x40
+#define BCM1480_PM_INT_NUM_FUNCTIONS 3
+
+/*
+ * DMA channel registers relative to A_BCM1480_PMI_LCL_BASE(n) and A_BCM1480_PMO_LCL_BASE(n)
+ */
+
+#define R_BCM1480_PM_BASE_SIZE 0x0000000000
+#define R_BCM1480_PM_CNT 0x0000000008
+#define R_BCM1480_PM_PFCNT 0x0000000010
+#define R_BCM1480_PM_LAST 0x0000000018
+#define R_BCM1480_PM_PFINDX 0x0000000020
+#define R_BCM1480_PM_INT_WMK 0x0000000028
+#define R_BCM1480_PM_CONFIG0 0x0000000030
+#define R_BCM1480_PM_LOCALDEBUG 0x0000000078
+#define R_BCM1480_PM_CACHEABILITY 0x0000000080 /* PMI only */
+#define R_BCM1480_PM_INT_CNFG 0x0000000088
+#define R_BCM1480_PM_DESC_MERGE_TIMER 0x0000000090
+#define R_BCM1480_PM_LOCALDEBUG_PIB 0x00000000F8 /* PMI only */
+#define R_BCM1480_PM_LOCALDEBUG_POB 0x00000000F8 /* PMO only */
+
+/*
+ * Global Registers (Not Channelized)
+ */
+
+#define A_BCM1480_PMI_GLB_0 0x0010056000
+#define A_BCM1480_PMO_GLB_0 0x0010057000
+
+/*
+ * PM to TX Mapping Register relative to A_BCM1480_PMI_GLB_0 and A_BCM1480_PMO_GLB_0
+ */
+
+#define R_BCM1480_PM_PMO_MAPPING 0x00000008C8 /* PMO only */
+
+#define A_BCM1480_PM_PMO_MAPPING (A_BCM1480_PMO_GLB_0 + R_BCM1480_PM_PMO_MAPPING)
+
+/*
+ * Interrupt mapping registers
+ */
+
+
+#define A_BCM1480_PMI_INT_0 0x0010056800
+#define A_BCM1480_PMI_INT(q) (A_BCM1480_PMI_INT_0 + ((q>>8)<<8))
+#define A_BCM1480_PMI_INT_OFFSET_0 (A_BCM1480_PMI_INT_0 - A_BCM1480_PM_BASE)
+#define A_BCM1480_PMO_INT_0 0x0010057800
+#define A_BCM1480_PMO_INT(q) (A_BCM1480_PMO_INT_0 + ((q>>8)<<8))
+#define A_BCM1480_PMO_INT_OFFSET_0 (A_BCM1480_PMO_INT_0 - A_BCM1480_PM_BASE)
+
+/*
+ * Interrupt registers relative to A_BCM1480_PMI_INT_0 and A_BCM1480_PMO_INT_0
+ */
+
+#define R_BCM1480_PM_INT_ST 0x0000000000
+#define R_BCM1480_PM_INT_MSK 0x0000000040
+#define R_BCM1480_PM_INT_CLR 0x0000000080
+#define R_BCM1480_PM_MRGD_INT 0x00000000C0
+
+/*
+ * Debug registers (global)
+ */
+
+#define A_BCM1480_PM_GLOBALDEBUGMODE_PMI 0x0010056000
+#define A_BCM1480_PM_GLOBALDEBUG_PID 0x00100567F8
+#define A_BCM1480_PM_GLOBALDEBUG_PIB 0x0010056FF8
+#define A_BCM1480_PM_GLOBALDEBUGMODE_PMO 0x0010057000
+#define A_BCM1480_PM_GLOBALDEBUG_POD 0x00100577F8
+#define A_BCM1480_PM_GLOBALDEBUG_POB 0x0010057FF8
+
+/* *********************************************************************
+ * Switch performance counters
+ ********************************************************************* */
+
+#define A_BCM1480_SWPERF_CFG 0xdfb91800
+#define A_BCM1480_SWPERF_CNT0 0xdfb91880
+#define A_BCM1480_SWPERF_CNT1 0xdfb91888
+#define A_BCM1480_SWPERF_CNT2 0xdfb91890
+#define A_BCM1480_SWPERF_CNT3 0xdfb91898
+
+
+/* *********************************************************************
+ * Switch Trace Unit
+ ********************************************************************* */
+
+#define A_BCM1480_SWTRC_MATCH_CONTROL_0 0xDFB91000
+#define A_BCM1480_SWTRC_MATCH_DATA_VALUE_0 0xDFB91100
+#define A_BCM1480_SWTRC_MATCH_DATA_MASK_0 0xDFB91108
+#define A_BCM1480_SWTRC_MATCH_TAG_VALUE_0 0xDFB91200
+#define A_BCM1480_SWTRC_MATCH_TAG_MAKS_0 0xDFB91208
+#define A_BCM1480_SWTRC_EVENT_0 0xDFB91300
+#define A_BCM1480_SWTRC_SEQUENCE_0 0xDFB91400
+
+#define A_BCM1480_SWTRC_CFG 0xDFB91500
+#define A_BCM1480_SWTRC_READ 0xDFB91508
+
+#define A_BCM1480_SWDEBUG_SCHEDSTOP 0xDFB92000
+
+#define A_BCM1480_SWTRC_MATCH_CONTROL(x) (A_BCM1480_SWTRC_MATCH_CONTROL_0 + ((x)*8))
+#define A_BCM1480_SWTRC_EVENT(x) (A_BCM1480_SWTRC_EVENT_0 + ((x)*8))
+#define A_BCM1480_SWTRC_SEQUENCE(x) (A_BCM1480_SWTRC_SEQUENCE_0 + ((x)*8))
+
+#define A_BCM1480_SWTRC_MATCH_DATA_VALUE(x) (A_BCM1480_SWTRC_MATCH_DATA_VALUE_0 + ((x)*16))
+#define A_BCM1480_SWTRC_MATCH_DATA_MASK(x) (A_BCM1480_SWTRC_MATCH_DATA_MASK_0 + ((x)*16))
+#define A_BCM1480_SWTRC_MATCH_TAG_VALUE(x) (A_BCM1480_SWTRC_MATCH_TAG_VALUE_0 + ((x)*16))
+#define A_BCM1480_SWTRC_MATCH_TAG_MASK(x) (A_BCM1480_SWTRC_MATCH_TAG_MASK_0 + ((x)*16))
+
+
+
+/* *********************************************************************
+ * High-Speed Port Registers (Section 13)
+ ********************************************************************* */
+
+#define A_BCM1480_HSP_BASE_0 0x00DF810000
+#define A_BCM1480_HSP_BASE_1 0x00DF890000
+#define A_BCM1480_HSP_BASE_2 0x00DF910000
+#define BCM1480_HSP_REGISTER_SPACING 0x80000
+
+#define A_BCM1480_HSP_BASE(idx) (A_BCM1480_HSP_BASE_0 + ((idx)*BCM1480_HSP_REGISTER_SPACING))
+#define A_BCM1480_HSP_REGISTER(idx, reg) (A_BCM1480_HSP_BASE(idx) + (reg))
+
+#define R_BCM1480_HSP_RX_SPI4_CFG_0 0x0000000000
+#define R_BCM1480_HSP_RX_SPI4_CFG_1 0x0000000008
+#define R_BCM1480_HSP_RX_SPI4_DESKEW_OVERRIDE 0x0000000010
+#define R_BCM1480_HSP_RX_SPI4_DESKEW_DATAPATH 0x0000000018
+#define R_BCM1480_HSP_RX_SPI4_PORT_INT_EN 0x0000000020
+#define R_BCM1480_HSP_RX_SPI4_PORT_INT_STATUS 0x0000000028
+
+#define R_BCM1480_HSP_RX_SPI4_CALENDAR_0 0x0000000200
+#define R_BCM1480_HSP_RX_SPI4_CALENDAR_1 0x0000000208
+
+#define R_BCM1480_HSP_RX_PLL_CNFG 0x0000000800
+#define R_BCM1480_HSP_RX_CALIBRATION 0x0000000808
+#define R_BCM1480_HSP_RX_TEST 0x0000000810
+#define R_BCM1480_HSP_RX_DIAG_DETAILS 0x0000000818
+#define R_BCM1480_HSP_RX_DIAG_CRC_0 0x0000000820
+#define R_BCM1480_HSP_RX_DIAG_CRC_1 0x0000000828
+#define R_BCM1480_HSP_RX_DIAG_HTCMD 0x0000000830
+#define R_BCM1480_HSP_RX_DIAG_PKTCTL 0x0000000838
+
+#define R_BCM1480_HSP_RX_VIS_FLCTRL_COUNTER 0x0000000870
+
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_0 0x0000020020
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_1 0x0000020028
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_2 0x0000020030
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_3 0x0000020038
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_4 0x0000020040
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_5 0x0000020048
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_6 0x0000020050
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_7 0x0000020058
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC(idx) (R_BCM1480_HSP_RX_PKT_RAMALLOC_0 + 8*(idx))
+
+/* XXX Following registers were shuffled. Renamed/renumbered per errata. */
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_0 0x0000020078
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_1 0x0000020080
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_2 0x0000020088
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_3 0x0000020090
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_4 0x0000020098
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_5 0x00000200A0
+
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_0 0x00000200B0
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_1 0x00000200B8
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_2 0x00000200C0
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_3 0x00000200C8
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_4 0x00000200D0
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_5 0x00000200D8
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_6 0x00000200E0
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_7 0x00000200E8
+#define R_BCM1480_HSP_RX_SPI_WATERMARK(idx) (R_BCM1480_HSP_RX_SPI_WATERMARK_0 + 8*(idx))
+
+#define R_BCM1480_HSP_RX_VIS_CMDQ_0 0x00000200F0
+#define R_BCM1480_HSP_RX_VIS_CMDQ_1 0x00000200F8
+#define R_BCM1480_HSP_RX_VIS_CMDQ_2 0x0000020100
+#define R_BCM1480_HSP_RX_RAM_READCTL 0x0000020108
+#define R_BCM1480_HSP_RX_RAM_READWINDOW 0x0000020110
+#define R_BCM1480_HSP_RX_RF_READCTL 0x0000020118
+#define R_BCM1480_HSP_RX_RF_READWINDOW 0x0000020120
+
+#define R_BCM1480_HSP_TX_SPI4_CFG_0 0x0000040000
+#define R_BCM1480_HSP_TX_SPI4_CFG_1 0x0000040008
+#define R_BCM1480_HSP_TX_SPI4_TRAINING_FMT 0x0000040010
+
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_0 0x0000040020
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_1 0x0000040028
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_2 0x0000040030
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_3 0x0000040038
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_4 0x0000040040
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_5 0x0000040048
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_6 0x0000040050
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_7 0x0000040058
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC(idx) (R_BCM1480_HSP_TX_PKT_RAMALLOC_0 + 8*(idx))
+#define R_BCM1480_HSP_TX_NPC_RAMALLOC 0x0000040078
+#define R_BCM1480_HSP_TX_RSP_RAMALLOC 0x0000040080
+#define R_BCM1480_HSP_TX_PC_RAMALLOC 0x0000040088
+#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_0 0x0000040090
+#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_1 0x0000040098
+#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_2 0x00000400A0
+
+#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_0 0x00000400B0
+#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_1 0x00000400B8
+#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_2 0x00000400C0
+#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_3 0x00000400C8
+#define R_BCM1480_HSP_TX_PKT_RXPHITCNT(idx) (R_BCM1480_HSP_TX_PKT_RXPHITCNT_0 + 8*(idx))
+#define R_BCM1480_HSP_TX_HTIO_RXPHITCNT 0x00000400D0
+#define R_BCM1480_HSP_TX_HTCC_RXPHITCNT 0x00000400D8
+
+#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_0 0x00000400E0
+#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_1 0x00000400E8
+#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_2 0x00000400F0
+#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_3 0x00000400F8
+#define R_BCM1480_HSP_TX_PKT_TXPHITCNT(idx) (R_BCM1480_HSP_TX_PKT_TXPHITCNT_0 + 8*(idx))
+#define R_BCM1480_HSP_TX_HTIO_TXPHITCNT 0x0000040100
+#define R_BCM1480_HSP_TX_HTCC_TXPHITCNT 0x0000040108
+
+#define R_BCM1480_HSP_TX_SPI4_CALENDAR_0 0x0000040200
+#define R_BCM1480_HSP_TX_SPI4_CALENDAR_1 0x0000040208
+
+#define R_BCM1480_HSP_TX_PLL_CNFG 0x0000040800
+#define R_BCM1480_HSP_TX_CALIBRATION 0x0000040808
+#define R_BCM1480_HSP_TX_TEST 0x0000040810
+
+#define R_BCM1480_HSP_TX_VIS_CMDQ_0 0x0000040840
+#define R_BCM1480_HSP_TX_VIS_CMDQ_1 0x0000040848
+#define R_BCM1480_HSP_TX_VIS_CMDQ_2 0x0000040850
+#define R_BCM1480_HSP_TX_RAM_READCTL 0x0000040860
+#define R_BCM1480_HSP_TX_RAM_READWINDOW 0x0000040868
+#define R_BCM1480_HSP_TX_RF_READCTL 0x0000040870
+#define R_BCM1480_HSP_TX_RF_READWINDOW 0x0000040878
+
+#define R_BCM1480_HSP_TX_SPI4_PORT_INT_STATUS 0x0000040880
+#define R_BCM1480_HSP_TX_SPI4_PORT_INT_EN 0x0000040888
+
+#define R_BCM1480_HSP_TX_NEXT_ADDR_BASE 0x000040400
+#define R_BCM1480_HSP_TX_NEXT_ADDR_REGISTER(x) (R_BCM1480_HSP_TX_NEXT_ADDR_BASE+ 8*(x))
+
+
+
+/* *********************************************************************
+ * Physical Address Map (Table 10 and Figure 7)
+ ********************************************************************* */
+
+#define A_BCM1480_PHYS_MEMORY_0 _SB_MAKE64(0x0000000000)
+#define A_BCM1480_PHYS_MEMORY_SIZE _SB_MAKE64((256*1024*1024))
+#define A_BCM1480_PHYS_SYSTEM_CTL _SB_MAKE64(0x0010000000)
+#define A_BCM1480_PHYS_IO_SYSTEM _SB_MAKE64(0x0010060000)
+#define A_BCM1480_PHYS_GENBUS _SB_MAKE64(0x0010090000)
+#define A_BCM1480_PHYS_GENBUS_END _SB_MAKE64(0x0028000000)
+#define A_BCM1480_PHYS_PCI_MISC_MATCH_BYTES _SB_MAKE64(0x0028000000)
+#define A_BCM1480_PHYS_PCI_IACK_MATCH_BYTES _SB_MAKE64(0x0029000000)
+#define A_BCM1480_PHYS_PCI_IO_MATCH_BYTES _SB_MAKE64(0x002C000000)
+#define A_BCM1480_PHYS_PCI_CFG_MATCH_BYTES _SB_MAKE64(0x002E000000)
+#define A_BCM1480_PHYS_PCI_OMAP_MATCH_BYTES _SB_MAKE64(0x002F000000)
+#define A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES _SB_MAKE64(0x0030000000)
+#define A_BCM1480_PHYS_HT_MEM_MATCH_BYTES _SB_MAKE64(0x0040000000)
+#define A_BCM1480_PHYS_HT_MEM_MATCH_BITS _SB_MAKE64(0x0060000000)
+#define A_BCM1480_PHYS_MEMORY_1 _SB_MAKE64(0x0080000000)
+#define A_BCM1480_PHYS_MEMORY_2 _SB_MAKE64(0x0090000000)
+#define A_BCM1480_PHYS_PCI_MISC_MATCH_BITS _SB_MAKE64(0x00A8000000)
+#define A_BCM1480_PHYS_PCI_IACK_MATCH_BITS _SB_MAKE64(0x00A9000000)
+#define A_BCM1480_PHYS_PCI_IO_MATCH_BITS _SB_MAKE64(0x00AC000000)
+#define A_BCM1480_PHYS_PCI_CFG_MATCH_BITS _SB_MAKE64(0x00AE000000)
+#define A_BCM1480_PHYS_PCI_OMAP_MATCH_BITS _SB_MAKE64(0x00AF000000)
+#define A_BCM1480_PHYS_PCI_MEM_MATCH_BITS _SB_MAKE64(0x00B0000000)
+#define A_BCM1480_PHYS_MEMORY_3 _SB_MAKE64(0x00C0000000)
+#define A_BCM1480_PHYS_L2_CACHE_TEST _SB_MAKE64(0x00D0000000)
+#define A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES _SB_MAKE64(0x00D8000000)
+#define A_BCM1480_PHYS_HT_IO_MATCH_BYTES _SB_MAKE64(0x00DC000000)
+#define A_BCM1480_PHYS_HT_CFG_MATCH_BYTES _SB_MAKE64(0x00DE000000)
+#define A_BCM1480_PHYS_HS_SUBSYS _SB_MAKE64(0x00DF000000)
+#define A_BCM1480_PHYS_HT_SPECIAL_MATCH_BITS _SB_MAKE64(0x00F8000000)
+#define A_BCM1480_PHYS_HT_IO_MATCH_BITS _SB_MAKE64(0x00FC000000)
+#define A_BCM1480_PHYS_HT_CFG_MATCH_BITS _SB_MAKE64(0x00FE000000)
+#define A_BCM1480_PHYS_MEMORY_EXP _SB_MAKE64(0x0100000000)
+#define A_BCM1480_PHYS_MEMORY_EXP_SIZE _SB_MAKE64((508*1024*1024*1024))
+#define A_BCM1480_PHYS_PCI_UPPER _SB_MAKE64(0x1000000000)
+#define A_BCM1480_PHYS_HT_UPPER_MATCH_BYTES _SB_MAKE64(0x2000000000)
+#define A_BCM1480_PHYS_HT_UPPER_MATCH_BITS _SB_MAKE64(0x3000000000)
+#define A_BCM1480_PHYS_HT_NODE_ALIAS _SB_MAKE64(0x4000000000)
+#define A_BCM1480_PHYS_HT_FULLACCESS _SB_MAKE64(0xF000000000)
+
+
+/* *********************************************************************
+ * L2 Cache as RAM (Table 54)
+ ********************************************************************* */
+
+#define A_BCM1480_PHYS_L2CACHE_WAY_SIZE _SB_MAKE64(0x0000020000)
+#define BCM1480_PHYS_L2CACHE_NUM_WAYS 8
+#define A_BCM1480_PHYS_L2CACHE_TOTAL_SIZE _SB_MAKE64(0x0000100000)
+#define A_BCM1480_PHYS_L2CACHE_WAY0 _SB_MAKE64(0x00D0300000)
+#define A_BCM1480_PHYS_L2CACHE_WAY1 _SB_MAKE64(0x00D0320000)
+#define A_BCM1480_PHYS_L2CACHE_WAY2 _SB_MAKE64(0x00D0340000)
+#define A_BCM1480_PHYS_L2CACHE_WAY3 _SB_MAKE64(0x00D0360000)
+#define A_BCM1480_PHYS_L2CACHE_WAY4 _SB_MAKE64(0x00D0380000)
+#define A_BCM1480_PHYS_L2CACHE_WAY5 _SB_MAKE64(0x00D03A0000)
+#define A_BCM1480_PHYS_L2CACHE_WAY6 _SB_MAKE64(0x00D03C0000)
+#define A_BCM1480_PHYS_L2CACHE_WAY7 _SB_MAKE64(0x00D03E0000)
+
+#endif /* _BCM1480_REGS_H */
diff --git a/arch/mips/include/asm/sibyte/bcm1480_scd.h b/arch/mips/include/asm/sibyte/bcm1480_scd.h
new file mode 100644
index 00000000000..25ef24cbb92
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/bcm1480_scd.h
@@ -0,0 +1,406 @@
+/* *********************************************************************
+ * BCM1280/BCM1400 Board Support Package
+ *
+ * SCD Constants and Macros File: bcm1480_scd.h
+ *
+ * This module contains constants and macros useful for
+ * manipulating the System Control and Debug module.
+ *
+ * BCM1400 specification level: 1X55_1X80-UM100-R (12/18/03)
+ *
+ *********************************************************************
+ *
+ * Copyright 2000,2001,2002,2003,2004,2005
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+#ifndef _BCM1480_SCD_H
+#define _BCM1480_SCD_H
+
+#include "sb1250_defs.h"
+
+/* *********************************************************************
+ * Pull in the BCM1250's SCD since lots of stuff is the same.
+ ********************************************************************* */
+
+#include "sb1250_scd.h"
+
+/* *********************************************************************
+ * Some general notes:
+ *
+ * This file is basically a "what's new" header file. Since the
+ * BCM1250 and the new BCM1480 (and derivatives) share many common
+ * features, this file contains only what's new or changed from
+ * the 1250. (above, you can see that we include the 1250 symbols
+ * to get the base functionality).
+ *
+ * In software, be sure to use the correct symbols, particularly
+ * for blocks that are different between the two chip families.
+ * All BCM1480-specific symbols have _BCM1480_ in their names,
+ * and all BCM1250-specific and "base" functions that are common in
+ * both chips have no special names (this is for compatibility with
+ * older include files). Therefore, if you're working with the
+ * SCD, which is very different on each chip, A_SCD_xxx implies
+ * the BCM1250 version and A_BCM1480_SCD_xxx implies the BCM1480
+ * version.
+ ********************************************************************* */
+
+/* *********************************************************************
+ * System control/debug registers
+ ********************************************************************* */
+
+/*
+ * System Identification and Revision Register (Table 12)
+ * Register: SCD_SYSTEM_REVISION
+ * This register is field compatible with the 1250.
+ */
+
+/*
+ * New part definitions
+ */
+
+#define K_SYS_PART_BCM1480 0x1406
+#define K_SYS_PART_BCM1280 0x1206
+#define K_SYS_PART_BCM1455 0x1407
+#define K_SYS_PART_BCM1255 0x1257
+#define K_SYS_PART_BCM1158 0x1156
+
+/*
+ * Manufacturing Information Register (Table 14)
+ * Register: SCD_SYSTEM_MANUF
+ */
+
+/*
+ * System Configuration Register (Table 15)
+ * Register: SCD_SYSTEM_CFG
+ * Entire register is different from 1250, all new constants below
+ */
+
+#define M_BCM1480_SYS_RESERVED0 _SB_MAKEMASK1(0)
+#define M_BCM1480_SYS_HT_MINRSTCNT _SB_MAKEMASK1(1)
+#define M_BCM1480_SYS_RESERVED2 _SB_MAKEMASK1(2)
+#define M_BCM1480_SYS_RESERVED3 _SB_MAKEMASK1(3)
+#define M_BCM1480_SYS_RESERVED4 _SB_MAKEMASK1(4)
+#define M_BCM1480_SYS_IOB_DIV _SB_MAKEMASK1(5)
+
+#define S_BCM1480_SYS_PLL_DIV _SB_MAKE64(6)
+#define M_BCM1480_SYS_PLL_DIV _SB_MAKEMASK(5, S_BCM1480_SYS_PLL_DIV)
+#define V_BCM1480_SYS_PLL_DIV(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_PLL_DIV)
+#define G_BCM1480_SYS_PLL_DIV(x) _SB_GETVALUE(x, S_BCM1480_SYS_PLL_DIV, M_BCM1480_SYS_PLL_DIV)
+
+#define S_BCM1480_SYS_SW_DIV _SB_MAKE64(11)
+#define M_BCM1480_SYS_SW_DIV _SB_MAKEMASK(5, S_BCM1480_SYS_SW_DIV)
+#define V_BCM1480_SYS_SW_DIV(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_SW_DIV)
+#define G_BCM1480_SYS_SW_DIV(x) _SB_GETVALUE(x, S_BCM1480_SYS_SW_DIV, M_BCM1480_SYS_SW_DIV)
+
+#define M_BCM1480_SYS_PCMCIA_ENABLE _SB_MAKEMASK1(16)
+#define M_BCM1480_SYS_DUART1_ENABLE _SB_MAKEMASK1(17)
+
+#define S_BCM1480_SYS_BOOT_MODE _SB_MAKE64(18)
+#define M_BCM1480_SYS_BOOT_MODE _SB_MAKEMASK(2, S_BCM1480_SYS_BOOT_MODE)
+#define V_BCM1480_SYS_BOOT_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_BOOT_MODE)
+#define G_BCM1480_SYS_BOOT_MODE(x) _SB_GETVALUE(x, S_BCM1480_SYS_BOOT_MODE, M_BCM1480_SYS_BOOT_MODE)
+#define K_BCM1480_SYS_BOOT_MODE_ROM32 0
+#define K_BCM1480_SYS_BOOT_MODE_ROM8 1
+#define K_BCM1480_SYS_BOOT_MODE_SMBUS_SMALL 2
+#define K_BCM1480_SYS_BOOT_MODE_SMBUS_BIG 3
+#define M_BCM1480_SYS_BOOT_MODE_SMBUS _SB_MAKEMASK1(19)
+
+#define M_BCM1480_SYS_PCI_HOST _SB_MAKEMASK1(20)
+#define M_BCM1480_SYS_PCI_ARBITER _SB_MAKEMASK1(21)
+#define M_BCM1480_SYS_BIG_ENDIAN _SB_MAKEMASK1(22)
+#define M_BCM1480_SYS_GENCLK_EN _SB_MAKEMASK1(23)
+#define M_BCM1480_SYS_GEN_PARITY_EN _SB_MAKEMASK1(24)
+#define M_BCM1480_SYS_RESERVED25 _SB_MAKEMASK1(25)
+
+#define S_BCM1480_SYS_CONFIG 26
+#define M_BCM1480_SYS_CONFIG _SB_MAKEMASK(6, S_BCM1480_SYS_CONFIG)
+#define V_BCM1480_SYS_CONFIG(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_CONFIG)
+#define G_BCM1480_SYS_CONFIG(x) _SB_GETVALUE(x, S_BCM1480_SYS_CONFIG, M_BCM1480_SYS_CONFIG)
+
+#define M_BCM1480_SYS_RESERVED32 _SB_MAKEMASK(32, 15)
+
+#define S_BCM1480_SYS_NODEID 47
+#define M_BCM1480_SYS_NODEID _SB_MAKEMASK(4, S_BCM1480_SYS_NODEID)
+#define V_BCM1480_SYS_NODEID(x) _SB_MAKEVALUE(x, S_BCM1480_SYS_NODEID)
+#define G_BCM1480_SYS_NODEID(x) _SB_GETVALUE(x, S_BCM1480_SYS_NODEID, M_BCM1480_SYS_NODEID)
+
+#define M_BCM1480_SYS_CCNUMA_EN _SB_MAKEMASK1(51)
+#define M_BCM1480_SYS_CPU_RESET_0 _SB_MAKEMASK1(52)
+#define M_BCM1480_SYS_CPU_RESET_1 _SB_MAKEMASK1(53)
+#define M_BCM1480_SYS_CPU_RESET_2 _SB_MAKEMASK1(54)
+#define M_BCM1480_SYS_CPU_RESET_3 _SB_MAKEMASK1(55)
+#define S_BCM1480_SYS_DISABLECPU0 56
+#define M_BCM1480_SYS_DISABLECPU0 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU0)
+#define S_BCM1480_SYS_DISABLECPU1 57
+#define M_BCM1480_SYS_DISABLECPU1 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU1)
+#define S_BCM1480_SYS_DISABLECPU2 58
+#define M_BCM1480_SYS_DISABLECPU2 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU2)
+#define S_BCM1480_SYS_DISABLECPU3 59
+#define M_BCM1480_SYS_DISABLECPU3 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU3)
+
+#define M_BCM1480_SYS_SB_SOFTRES _SB_MAKEMASK1(60)
+#define M_BCM1480_SYS_EXT_RESET _SB_MAKEMASK1(61)
+#define M_BCM1480_SYS_SYSTEM_RESET _SB_MAKEMASK1(62)
+#define M_BCM1480_SYS_SW_FLAG _SB_MAKEMASK1(63)
+
+/*
+ * Scratch Register (Table 16)
+ * Register: SCD_SYSTEM_SCRATCH
+ * Same as BCM1250
+ */
+
+
+/*
+ * Mailbox Registers (Table 17)
+ * Registers: SCD_MBOX_{0,1}_CPU_x
+ * Same as BCM1250
+ */
+
+
+/*
+ * See bcm1480_int.h for interrupt mapper registers.
+ */
+
+
+/*
+ * Watchdog Timer Initial Count Registers (Table 23)
+ * Registers: SCD_WDOG_INIT_CNT_x
+ *
+ * The watchdogs are almost the same as the 1250, except
+ * the configuration register has more bits to control the
+ * other CPUs.
+ */
+
+
+/*
+ * Watchdog Timer Configuration Registers (Table 25)
+ * Registers: SCD_WDOG_CFG_x
+ */
+
+#define M_BCM1480_SCD_WDOG_ENABLE _SB_MAKEMASK1(0)
+
+#define S_BCM1480_SCD_WDOG_RESET_TYPE 2
+#define M_BCM1480_SCD_WDOG_RESET_TYPE _SB_MAKEMASK(5, S_BCM1480_SCD_WDOG_RESET_TYPE)
+#define V_BCM1480_SCD_WDOG_RESET_TYPE(x) _SB_MAKEVALUE(x, S_BCM1480_SCD_WDOG_RESET_TYPE)
+#define G_BCM1480_SCD_WDOG_RESET_TYPE(x) _SB_GETVALUE(x, S_BCM1480_SCD_WDOG_RESET_TYPE, M_BCM1480_SCD_WDOG_RESET_TYPE)
+
+#define K_BCM1480_SCD_WDOG_RESET_FULL 0 /* actually, (x & 1) == 0 */
+#define K_BCM1480_SCD_WDOG_RESET_SOFT 1
+#define K_BCM1480_SCD_WDOG_RESET_CPU0 3
+#define K_BCM1480_SCD_WDOG_RESET_CPU1 5
+#define K_BCM1480_SCD_WDOG_RESET_CPU2 9
+#define K_BCM1480_SCD_WDOG_RESET_CPU3 17
+#define K_BCM1480_SCD_WDOG_RESET_ALL_CPUS 31
+
+
+#define M_BCM1480_SCD_WDOG_HAS_RESET _SB_MAKEMASK1(8)
+
+/*
+ * General Timer Initial Count Registers (Table 26)
+ * Registers: SCD_TIMER_INIT_x
+ *
+ * The timer registers are the same as the BCM1250
+ */
+
+
+/*
+ * ZBbus Count Register (Table 29)
+ * Register: ZBBUS_CYCLE_COUNT
+ *
+ * Same as BCM1250
+ */
+
+/*
+ * ZBbus Compare Registers (Table 30)
+ * Registers: ZBBUS_CYCLE_CPx
+ *
+ * Same as BCM1250
+ */
+
+
+/*
+ * System Performance Counter Configuration Register (Table 31)
+ * Register: PERF_CNT_CFG_0
+ *
+ * SPC_CFG_SRC[0-3] is the same as the 1250.
+ * SPC_CFG_SRC[4-7] only exist on the 1480
+ * The clear/enable bits are in different locations on the 1250 and 1480.
+ */
+
+#define S_SPC_CFG_SRC4 32
+#define M_SPC_CFG_SRC4 _SB_MAKEMASK(8, S_SPC_CFG_SRC4)
+#define V_SPC_CFG_SRC4(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC4)
+#define G_SPC_CFG_SRC4(x) _SB_GETVALUE(x, S_SPC_CFG_SRC4, M_SPC_CFG_SRC4)
+
+#define S_SPC_CFG_SRC5 40
+#define M_SPC_CFG_SRC5 _SB_MAKEMASK(8, S_SPC_CFG_SRC5)
+#define V_SPC_CFG_SRC5(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC5)
+#define G_SPC_CFG_SRC5(x) _SB_GETVALUE(x, S_SPC_CFG_SRC5, M_SPC_CFG_SRC5)
+
+#define S_SPC_CFG_SRC6 48
+#define M_SPC_CFG_SRC6 _SB_MAKEMASK(8, S_SPC_CFG_SRC6)
+#define V_SPC_CFG_SRC6(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC6)
+#define G_SPC_CFG_SRC6(x) _SB_GETVALUE(x, S_SPC_CFG_SRC6, M_SPC_CFG_SRC6)
+
+#define S_SPC_CFG_SRC7 56
+#define M_SPC_CFG_SRC7 _SB_MAKEMASK(8, S_SPC_CFG_SRC7)
+#define V_SPC_CFG_SRC7(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC7)
+#define G_SPC_CFG_SRC7(x) _SB_GETVALUE(x, S_SPC_CFG_SRC7, M_SPC_CFG_SRC7)
+
+/*
+ * System Performance Counter Control Register (Table 32)
+ * Register: PERF_CNT_CFG_1
+ * BCM1480 specific
+ */
+#define M_BCM1480_SPC_CFG_CLEAR _SB_MAKEMASK1(0)
+#define M_BCM1480_SPC_CFG_ENABLE _SB_MAKEMASK1(1)
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_SPC_CFG_CLEAR M_BCM1480_SPC_CFG_CLEAR
+#define M_SPC_CFG_ENABLE M_BCM1480_SPC_CFG_ENABLE
+#endif
+
+/*
+ * System Performance Counters (Table 33)
+ * Registers: PERF_CNT_x
+ */
+
+#define S_BCM1480_SPC_CNT_COUNT 0
+#define M_BCM1480_SPC_CNT_COUNT _SB_MAKEMASK(40, S_BCM1480_SPC_CNT_COUNT)
+#define V_BCM1480_SPC_CNT_COUNT(x) _SB_MAKEVALUE(x, S_BCM1480_SPC_CNT_COUNT)
+#define G_BCM1480_SPC_CNT_COUNT(x) _SB_GETVALUE(x, S_BCM1480_SPC_CNT_COUNT, M_BCM1480_SPC_CNT_COUNT)
+
+#define M_BCM1480_SPC_CNT_OFLOW _SB_MAKEMASK1(40)
+
+
+/*
+ * Bus Watcher Error Status Register (Tables 36, 37)
+ * Registers: BUS_ERR_STATUS, BUS_ERR_STATUS_DEBUG
+ * Same as BCM1250.
+ */
+
+/*
+ * Bus Watcher Error Data Registers (Table 38)
+ * Registers: BUS_ERR_DATA_x
+ * Same as BCM1250.
+ */
+
+/*
+ * Bus Watcher L2 ECC Counter Register (Table 39)
+ * Register: BUS_L2_ERRORS
+ * Same as BCM1250.
+ */
+
+
+/*
+ * Bus Watcher Memory and I/O Error Counter Register (Table 40)
+ * Register: BUS_MEM_IO_ERRORS
+ * Same as BCM1250.
+ */
+
+
+/*
+ * Address Trap Registers
+ *
+ * Register layout same as BCM1250, almost. The bus agents
+ * are different, and the address trap configuration bits are
+ * slightly different.
+ */
+
+#define M_BCM1480_ATRAP_INDEX _SB_MAKEMASK(4, 0)
+#define M_BCM1480_ATRAP_ADDRESS _SB_MAKEMASK(40, 0)
+
+#define S_BCM1480_ATRAP_CFG_CNT 0
+#define M_BCM1480_ATRAP_CFG_CNT _SB_MAKEMASK(3, S_BCM1480_ATRAP_CFG_CNT)
+#define V_BCM1480_ATRAP_CFG_CNT(x) _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_CNT)
+#define G_BCM1480_ATRAP_CFG_CNT(x) _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_CNT, M_BCM1480_ATRAP_CFG_CNT)
+
+#define M_BCM1480_ATRAP_CFG_WRITE _SB_MAKEMASK1(3)
+#define M_BCM1480_ATRAP_CFG_ALL _SB_MAKEMASK1(4)
+#define M_BCM1480_ATRAP_CFG_INV _SB_MAKEMASK1(5)
+#define M_BCM1480_ATRAP_CFG_USESRC _SB_MAKEMASK1(6)
+#define M_BCM1480_ATRAP_CFG_SRCINV _SB_MAKEMASK1(7)
+
+#define S_BCM1480_ATRAP_CFG_AGENTID 8
+#define M_BCM1480_ATRAP_CFG_AGENTID _SB_MAKEMASK(4, S_BCM1480_ATRAP_CFG_AGENTID)
+#define V_BCM1480_ATRAP_CFG_AGENTID(x) _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_AGENTID)
+#define G_BCM1480_ATRAP_CFG_AGENTID(x) _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_AGENTID, M_BCM1480_ATRAP_CFG_AGENTID)
+
+
+#define K_BCM1480_BUS_AGENT_CPU0 0
+#define K_BCM1480_BUS_AGENT_CPU1 1
+#define K_BCM1480_BUS_AGENT_NC 2
+#define K_BCM1480_BUS_AGENT_IOB 3
+#define K_BCM1480_BUS_AGENT_SCD 4
+#define K_BCM1480_BUS_AGENT_L2C 6
+#define K_BCM1480_BUS_AGENT_MC 7
+#define K_BCM1480_BUS_AGENT_CPU2 8
+#define K_BCM1480_BUS_AGENT_CPU3 9
+#define K_BCM1480_BUS_AGENT_PM 10
+
+#define S_BCM1480_ATRAP_CFG_CATTR 12
+#define M_BCM1480_ATRAP_CFG_CATTR _SB_MAKEMASK(2, S_BCM1480_ATRAP_CFG_CATTR)
+#define V_BCM1480_ATRAP_CFG_CATTR(x) _SB_MAKEVALUE(x, S_BCM1480_ATRAP_CFG_CATTR)
+#define G_BCM1480_ATRAP_CFG_CATTR(x) _SB_GETVALUE(x, S_BCM1480_ATRAP_CFG_CATTR, M_BCM1480_ATRAP_CFG_CATTR)
+
+#define K_BCM1480_ATRAP_CFG_CATTR_IGNORE 0
+#define K_BCM1480_ATRAP_CFG_CATTR_UNC 1
+#define K_BCM1480_ATRAP_CFG_CATTR_NONCOH 2
+#define K_BCM1480_ATRAP_CFG_CATTR_COHERENT 3
+
+#define M_BCM1480_ATRAP_CFG_CATTRINV _SB_MAKEMASK1(14)
+
+
+/*
+ * Trace Event Registers (Table 47)
+ * Same as BCM1250.
+ */
+
+/*
+ * Trace Sequence Control Registers (Table 48)
+ * Registers: TRACE_SEQUENCE_x
+ *
+ * Same as BCM1250 except for two new fields.
+ */
+
+
+#define M_BCM1480_SCD_TRSEQ_TID_MATCH_EN _SB_MAKEMASK1(25)
+
+#define S_BCM1480_SCD_TRSEQ_SWFUNC 26
+#define M_BCM1480_SCD_TRSEQ_SWFUNC _SB_MAKEMASK(2, S_BCM1480_SCD_TRSEQ_SWFUNC)
+#define V_BCM1480_SCD_TRSEQ_SWFUNC(x) _SB_MAKEVALUE(x, S_BCM1480_SCD_TRSEQ_SWFUNC)
+#define G_BCM1480_SCD_TRSEQ_SWFUNC(x) _SB_GETVALUE(x, S_BCM1480_SCD_TRSEQ_SWFUNC, M_BCM1480_SCD_TRSEQ_SWFUNC)
+
+/*
+ * Trace Control Register (Table 49)
+ * Register: TRACE_CFG
+ *
+ * BCM1480 changes to this register (other than location of the CUR_ADDR field)
+ * are defined below.
+ */
+
+#define S_BCM1480_SCD_TRACE_CFG_MODE 16
+#define M_BCM1480_SCD_TRACE_CFG_MODE _SB_MAKEMASK(2, S_BCM1480_SCD_TRACE_CFG_MODE)
+#define V_BCM1480_SCD_TRACE_CFG_MODE(x) _SB_MAKEVALUE(x, S_BCM1480_SCD_TRACE_CFG_MODE)
+#define G_BCM1480_SCD_TRACE_CFG_MODE(x) _SB_GETVALUE(x, S_BCM1480_SCD_TRACE_CFG_MODE, M_BCM1480_SCD_TRACE_CFG_MODE)
+
+#define K_BCM1480_SCD_TRACE_CFG_MODE_BLOCKERS 0
+#define K_BCM1480_SCD_TRACE_CFG_MODE_BYTEEN_INT 1
+#define K_BCM1480_SCD_TRACE_CFG_MODE_FLOW_ID 2
+
+#endif /* _BCM1480_SCD_H */
diff --git a/arch/mips/include/asm/sibyte/bigsur.h b/arch/mips/include/asm/sibyte/bigsur.h
new file mode 100644
index 00000000000..ebefe797fc1
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/bigsur.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#ifndef __ASM_SIBYTE_BIGSUR_H
+#define __ASM_SIBYTE_BIGSUR_H
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/bcm1480_int.h>
+
+#ifdef CONFIG_SIBYTE_BIGSUR
+#define SIBYTE_BOARD_NAME "BCM91x80A/B (BigSur)"
+#define SIBYTE_HAVE_PCMCIA 1
+#define SIBYTE_HAVE_IDE 1
+#endif
+
+/* Generic bus chip selects */
+#define LEDS_CS 3
+#define LEDS_PHYS 0x100a0000
+
+#ifdef SIBYTE_HAVE_IDE
+#define IDE_CS 4
+#define IDE_PHYS 0x100b0000
+#define K_GPIO_GB_IDE 4
+#define K_INT_GB_IDE (K_INT_GPIO_0 + K_GPIO_GB_IDE)
+#endif
+
+#ifdef SIBYTE_HAVE_PCMCIA
+#define PCMCIA_CS 6
+#define PCMCIA_PHYS 0x11000000
+#define K_GPIO_PC_READY 9
+#define K_INT_PC_READY (K_INT_GPIO_0 + K_GPIO_PC_READY)
+#endif
+
+#endif /* __ASM_SIBYTE_BIGSUR_H */
+
diff --git a/arch/mips/include/asm/sibyte/board.h b/arch/mips/include/asm/sibyte/board.h
new file mode 100644
index 00000000000..25372ae0e81
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/board.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _SIBYTE_BOARD_H
+#define _SIBYTE_BOARD_H
+
+#if defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_CRHONE) || \
+ defined(CONFIG_SIBYTE_CRHINE) || defined(CONFIG_SIBYTE_LITTLESUR)
+#include <asm/sibyte/swarm.h>
+#endif
+
+#if defined(CONFIG_SIBYTE_SENTOSA) || defined(CONFIG_SIBYTE_RHONE)
+#include <asm/sibyte/sentosa.h>
+#endif
+
+#ifdef CONFIG_SIBYTE_CARMEL
+#include <asm/sibyte/carmel.h>
+#endif
+
+#ifdef CONFIG_SIBYTE_BIGSUR
+#include <asm/sibyte/bigsur.h>
+#endif
+
+#ifdef __ASSEMBLY__
+
+#ifdef LEDS_PHYS
+#define setleds(t0, t1, c0, c1, c2, c3) \
+ li t0, (LEDS_PHYS|0xa0000000); \
+ li t1, c0; \
+ sb t1, 0x18(t0); \
+ li t1, c1; \
+ sb t1, 0x10(t0); \
+ li t1, c2; \
+ sb t1, 0x08(t0); \
+ li t1, c3; \
+ sb t1, 0x00(t0)
+#else
+#define setleds(t0, t1, c0, c1, c2, c3)
+#endif /* LEDS_PHYS */
+
+#else
+
+void swarm_setup(void);
+
+#ifdef LEDS_PHYS
+extern void setleds(char *str);
+#else
+#define setleds(s) do { } while (0)
+#endif /* LEDS_PHYS */
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _SIBYTE_BOARD_H */
diff --git a/arch/mips/include/asm/sibyte/carmel.h b/arch/mips/include/asm/sibyte/carmel.h
new file mode 100644
index 00000000000..11cad71323e
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/carmel.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2002 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#ifndef __ASM_SIBYTE_CARMEL_H
+#define __ASM_SIBYTE_CARMEL_H
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_int.h>
+
+#define SIBYTE_BOARD_NAME "Carmel"
+
+#define GPIO_PHY_INTERRUPT 2
+#define GPIO_NONMASKABLE_INT 3
+#define GPIO_CF_INSERTED 6
+#define GPIO_MONTEREY_RESET 7
+#define GPIO_QUADUART_INT 8
+#define GPIO_CF_INT 9
+#define GPIO_FPGA_CCLK 10
+#define GPIO_FPGA_DOUT 11
+#define GPIO_FPGA_DIN 12
+#define GPIO_FPGA_PGM 13
+#define GPIO_FPGA_DONE 14
+#define GPIO_FPGA_INIT 15
+
+#define LEDS_CS 2
+#define LEDS_PHYS 0x100C0000
+#define MLEDS_CS 3
+#define MLEDS_PHYS 0x100A0000
+#define UART_CS 4
+#define UART_PHYS 0x100D0000
+#define ARAVALI_CS 5
+#define ARAVALI_PHYS 0x11000000
+#define IDE_CS 6
+#define IDE_PHYS 0x100B0000
+#define ARAVALI2_CS 7
+#define ARAVALI2_PHYS 0x100E0000
+
+#if defined(CONFIG_SIBYTE_CARMEL)
+#define K_GPIO_GB_IDE 9
+#define K_INT_GB_IDE (K_INT_GPIO_0 + K_GPIO_GB_IDE)
+#endif
+
+
+#endif /* __ASM_SIBYTE_CARMEL_H */
diff --git a/arch/mips/include/asm/sibyte/sb1250.h b/arch/mips/include/asm/sibyte/sb1250.h
new file mode 100644
index 00000000000..80c1a052662
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _ASM_SIBYTE_SB1250_H
+#define _ASM_SIBYTE_SB1250_H
+
+/*
+ * yymmddpp: year, month, day, patch.
+ * should sync with Makefile EXTRAVERSION
+ */
+#define SIBYTE_RELEASE 0x02111403
+
+#define SB1250_NR_IRQS 64
+
+#define BCM1480_NR_IRQS 128
+#define BCM1480_NR_IRQS_HALF 64
+
+#define SB1250_DUART_MINOR_BASE 64
+
+#ifndef __ASSEMBLY__
+
+#include <asm/addrspace.h>
+
+/* For revision/pass information */
+#include <asm/sibyte/sb1250_scd.h>
+#include <asm/sibyte/bcm1480_scd.h>
+extern unsigned int sb1_pass;
+extern unsigned int soc_pass;
+extern unsigned int soc_type;
+extern unsigned int periph_rev;
+extern unsigned int zbbus_mhz;
+
+extern void sb1250_time_init(void);
+extern void sb1250_mask_irq(int cpu, int irq);
+extern void sb1250_unmask_irq(int cpu, int irq);
+
+extern void bcm1480_time_init(void);
+extern void bcm1480_mask_irq(int cpu, int irq);
+extern void bcm1480_unmask_irq(int cpu, int irq);
+
+#define AT_spin \
+ __asm__ __volatile__ ( \
+ ".set noat\n" \
+ "li $at, 0\n" \
+ "1: beqz $at, 1b\n" \
+ ".set at\n" \
+ )
+
+#endif
+
+#define IOADDR(a) ((void __iomem *)(IO_BASE + (a)))
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_defs.h b/arch/mips/include/asm/sibyte/sb1250_defs.h
new file mode 100644
index 00000000000..09365f9111f
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_defs.h
@@ -0,0 +1,259 @@
+/* *********************************************************************
+ * SB1250 Board Support Package
+ *
+ * Global constants and macros File: sb1250_defs.h
+ *
+ * This file contains macros and definitions used by the other
+ * include files.
+ *
+ * SB1250 specification level: User's manual 1/02/02
+ *
+ *********************************************************************
+ *
+ * Copyright 2000,2001,2002,2003
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+#ifndef _SB1250_DEFS_H
+#define _SB1250_DEFS_H
+
+/*
+ * These headers require ANSI C89 string concatenation, and GCC or other
+ * 'long long' (64-bit integer) support.
+ */
+#if !defined(__STDC__) && !defined(_MSC_VER)
+#error SiByte headers require ANSI C89 support
+#endif
+
+
+/* *********************************************************************
+ * Macros for feature tests, used to enable include file features
+ * for chip features only present in certain chip revisions.
+ *
+ * SIBYTE_HDR_FEATURES may be defined to be the mask value chip/revision
+ * which is to be exposed by the headers. If undefined, it defaults to
+ * "all features."
+ *
+ * Use like:
+ *
+ * #define SIBYTE_HDR_FEATURES SIBYTE_HDR_FMASK_112x_PASS1
+ *
+ * Generate defines only for that revision of chip.
+ *
+ * #if SIBYTE_HDR_FEATURE(chip,pass)
+ *
+ * True if header features for that revision or later of
+ * that particular chip type are enabled in SIBYTE_HDR_FEATURES.
+ * (Use this to bracket #defines for features present in a given
+ * revision and later.)
+ *
+ * Note that there is no implied ordering between chip types.
+ *
+ * Note also that 'chip' and 'pass' must textually exactly
+ * match the defines below. So, for example,
+ * SIBYTE_HDR_FEATURE(112x, PASS1) is OK, but
+ * SIBYTE_HDR_FEATURE(1120, pass1) is not (for two reasons).
+ *
+ * #if SIBYTE_HDR_FEATURE_UP_TO(chip,pass)
+ *
+ * Same as SIBYTE_HDR_FEATURE, but true for the named revision
+ * and earlier revisions of the named chip type.
+ *
+ * #if SIBYTE_HDR_FEATURE_EXACT(chip,pass)
+ *
+ * Same as SIBYTE_HDR_FEATURE, but only true for the named
+ * revision of the named chip type. (Note that this CANNOT
+ * be used to verify that you're compiling only for that
+ * particular chip/revision. It will be true any time this
+ * chip/revision is included in SIBYTE_HDR_FEATURES.)
+ *
+ * #if SIBYTE_HDR_FEATURE_CHIP(chip)
+ *
+ * True if header features for (any revision of) that chip type
+ * are enabled in SIBYTE_HDR_FEATURES. (Use this to bracket
+ * #defines for features specific to a given chip type.)
+ *
+ * Mask values currently include room for additional revisions of each
+ * chip type, but can be renumbered at will. Note that they MUST fit
+ * into 31 bits and may not include C type constructs, for safe use in
+ * CPP conditionals. Bit positions within chip types DO indicate
+ * ordering, so be careful when adding support for new minor revs.
+ ********************************************************************* */
+
+#define SIBYTE_HDR_FMASK_1250_ALL 0x000000ff
+#define SIBYTE_HDR_FMASK_1250_PASS1 0x00000001
+#define SIBYTE_HDR_FMASK_1250_PASS2 0x00000002
+#define SIBYTE_HDR_FMASK_1250_PASS3 0x00000004
+
+#define SIBYTE_HDR_FMASK_112x_ALL 0x00000f00
+#define SIBYTE_HDR_FMASK_112x_PASS1 0x00000100
+
+#define SIBYTE_HDR_FMASK_1480_ALL 0x0000f000
+#define SIBYTE_HDR_FMASK_1480_PASS1 0x00001000
+#define SIBYTE_HDR_FMASK_1480_PASS2 0x00002000
+
+/* Bit mask for chip/revision. (use _ALL for all revisions of a chip). */
+#define SIBYTE_HDR_FMASK(chip, pass) \
+ (SIBYTE_HDR_FMASK_ ## chip ## _ ## pass)
+#define SIBYTE_HDR_FMASK_ALLREVS(chip) \
+ (SIBYTE_HDR_FMASK_ ## chip ## _ALL)
+
+/* Default constant value for all chips, all revisions */
+#define SIBYTE_HDR_FMASK_ALL \
+ (SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL \
+ | SIBYTE_HDR_FMASK_1480_ALL)
+
+/* This one is used for the "original" BCM1250/BCM112x chips. We use this
+ to weed out constants and macros that do not exist on later chips like
+ the BCM1480 */
+#define SIBYTE_HDR_FMASK_1250_112x_ALL \
+ (SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL)
+#define SIBYTE_HDR_FMASK_1250_112x SIBYTE_HDR_FMASK_1250_112x_ALL
+
+#ifndef SIBYTE_HDR_FEATURES
+#define SIBYTE_HDR_FEATURES SIBYTE_HDR_FMASK_ALL
+#endif
+
+
+/* Bit mask for revisions of chip exclusively before the named revision. */
+#define SIBYTE_HDR_FMASK_BEFORE(chip, pass) \
+ ((SIBYTE_HDR_FMASK(chip, pass) - 1) & SIBYTE_HDR_FMASK_ALLREVS(chip))
+
+/* Bit mask for revisions of chip exclusively after the named revision. */
+#define SIBYTE_HDR_FMASK_AFTER(chip, pass) \
+ (~(SIBYTE_HDR_FMASK(chip, pass) \
+ | (SIBYTE_HDR_FMASK(chip, pass) - 1)) & SIBYTE_HDR_FMASK_ALLREVS(chip))
+
+
+/* True if header features enabled for (any revision of) that chip type. */
+#define SIBYTE_HDR_FEATURE_CHIP(chip) \
+ (!! (SIBYTE_HDR_FMASK_ALLREVS(chip) & SIBYTE_HDR_FEATURES))
+
+/* True for all versions of the BCM1250 and BCM1125, but not true for
+ anything else */
+#define SIBYTE_HDR_FEATURE_1250_112x \
+ (SIBYTE_HDR_FEATURE_CHIP(1250) || SIBYTE_HDR_FEATURE_CHIP(112x))
+/* (!! (SIBYTE_HDR_FEATURES & SIBYHTE_HDR_FMASK_1250_112x)) */
+
+/* True if header features enabled for that rev or later, inclusive. */
+#define SIBYTE_HDR_FEATURE(chip, pass) \
+ (!! ((SIBYTE_HDR_FMASK(chip, pass) \
+ | SIBYTE_HDR_FMASK_AFTER(chip, pass)) & SIBYTE_HDR_FEATURES))
+
+/* True if header features enabled for exactly that rev. */
+#define SIBYTE_HDR_FEATURE_EXACT(chip, pass) \
+ (!! (SIBYTE_HDR_FMASK(chip, pass) & SIBYTE_HDR_FEATURES))
+
+/* True if header features enabled for that rev or before, inclusive. */
+#define SIBYTE_HDR_FEATURE_UP_TO(chip, pass) \
+ (!! ((SIBYTE_HDR_FMASK(chip, pass) \
+ | SIBYTE_HDR_FMASK_BEFORE(chip, pass)) & SIBYTE_HDR_FEATURES))
+
+
+/* *********************************************************************
+ * Naming schemes for constants in these files:
+ *
+ * M_xxx MASK constant (identifies bits in a register).
+ * For multi-bit fields, all bits in the field will
+ * be set.
+ *
+ * K_xxx "Code" constant (value for data in a multi-bit
+ * field). The value is right justified.
+ *
+ * V_xxx "Value" constant. This is the same as the
+ * corresponding "K_xxx" constant, except it is
+ * shifted to the correct position in the register.
+ *
+ * S_xxx SHIFT constant. This is the number of bits that
+ * a field value (code) needs to be shifted
+ * (towards the left) to put the value in the right
+ * position for the register.
+ *
+ * A_xxx ADDRESS constant. This will be a physical
+ * address. Use the PHYS_TO_K1 macro to generate
+ * a K1SEG address.
+ *
+ * R_xxx RELATIVE offset constant. This is an offset from
+ * an A_xxx constant (usually the first register in
+ * a group).
+ *
+ * G_xxx(X) GET value. This macro obtains a multi-bit field
+ * from a register, masks it, and shifts it to
+ * the bottom of the register (retrieving a K_xxx
+ * value, for example).
+ *
+ * V_xxx(X) VALUE. This macro computes the value of a
+ * K_xxx constant shifted to the correct position
+ * in the register.
+ ********************************************************************* */
+
+
+
+
+/*
+ * Cast to 64-bit number. Presumably the syntax is different in
+ * assembly language.
+ *
+ * Note: you'll need to define uint32_t and uint64_t in your headers.
+ */
+
+#if !defined(__ASSEMBLY__)
+#define _SB_MAKE64(x) ((uint64_t)(x))
+#define _SB_MAKE32(x) ((uint32_t)(x))
+#else
+#define _SB_MAKE64(x) (x)
+#define _SB_MAKE32(x) (x)
+#endif
+
+
+/*
+ * Make a mask for 1 bit at position 'n'
+ */
+
+#define _SB_MAKEMASK1(n) (_SB_MAKE64(1) << _SB_MAKE64(n))
+#define _SB_MAKEMASK1_32(n) (_SB_MAKE32(1) << _SB_MAKE32(n))
+
+/*
+ * Make a mask for 'v' bits at position 'n'
+ */
+
+#define _SB_MAKEMASK(v, n) (_SB_MAKE64((_SB_MAKE64(1)<<(v))-1) << _SB_MAKE64(n))
+#define _SB_MAKEMASK_32(v, n) (_SB_MAKE32((_SB_MAKE32(1)<<(v))-1) << _SB_MAKE32(n))
+
+/*
+ * Make a value at 'v' at bit position 'n'
+ */
+
+#define _SB_MAKEVALUE(v, n) (_SB_MAKE64(v) << _SB_MAKE64(n))
+#define _SB_MAKEVALUE_32(v, n) (_SB_MAKE32(v) << _SB_MAKE32(n))
+
+#define _SB_GETVALUE(v, n, m) ((_SB_MAKE64(v) & _SB_MAKE64(m)) >> _SB_MAKE64(n))
+#define _SB_GETVALUE_32(v, n, m) ((_SB_MAKE32(v) & _SB_MAKE32(m)) >> _SB_MAKE32(n))
+
+/*
+ * Macros to read/write on-chip registers
+ * XXX should we do the PHYS_TO_K1 here?
+ */
+
+
+#if defined(__mips64) && !defined(__ASSEMBLY__)
+#define SBWRITECSR(csr, val) *((volatile uint64_t *) PHYS_TO_K1(csr)) = (val)
+#define SBREADCSR(csr) (*((volatile uint64_t *) PHYS_TO_K1(csr)))
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_dma.h b/arch/mips/include/asm/sibyte/sb1250_dma.h
new file mode 100644
index 00000000000..bad56171d74
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_dma.h
@@ -0,0 +1,594 @@
+/* *********************************************************************
+ * SB1250 Board Support Package
+ *
+ * DMA definitions File: sb1250_dma.h
+ *
+ * This module contains constants and macros useful for
+ * programming the SB1250's DMA controllers, both the data mover
+ * and the Ethernet DMA.
+ *
+ * SB1250 specification level: User's manual 10/21/02
+ * BCM1280 specification level: User's manual 11/24/03
+ *
+ *********************************************************************
+ *
+ * Copyright 2000,2001,2002,2003
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+
+#ifndef _SB1250_DMA_H
+#define _SB1250_DMA_H
+
+
+#include "sb1250_defs.h"
+
+/* *********************************************************************
+ * DMA Registers
+ ********************************************************************* */
+
+/*
+ * Ethernet and Serial DMA Configuration Register 0 (Table 7-4)
+ * Registers: DMA_CONFIG0_MAC_x_RX_CH_0
+ * Registers: DMA_CONFIG0_MAC_x_TX_CH_0
+ * Registers: DMA_CONFIG0_SER_x_RX
+ * Registers: DMA_CONFIG0_SER_x_TX
+ */
+
+
+#define M_DMA_DROP _SB_MAKEMASK1(0)
+
+#define M_DMA_CHAIN_SEL _SB_MAKEMASK1(1)
+#define M_DMA_RESERVED1 _SB_MAKEMASK1(2)
+
+#define S_DMA_DESC_TYPE _SB_MAKE64(1)
+#define M_DMA_DESC_TYPE _SB_MAKEMASK(2, S_DMA_DESC_TYPE)
+#define V_DMA_DESC_TYPE(x) _SB_MAKEVALUE(x, S_DMA_DESC_TYPE)
+#define G_DMA_DESC_TYPE(x) _SB_GETVALUE(x, S_DMA_DESC_TYPE, M_DMA_DESC_TYPE)
+
+#define K_DMA_DESC_TYPE_RING_AL 0
+#define K_DMA_DESC_TYPE_CHAIN_AL 1
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define K_DMA_DESC_TYPE_RING_UAL_WI 2
+#define K_DMA_DESC_TYPE_RING_UAL_RMW 3
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define M_DMA_EOP_INT_EN _SB_MAKEMASK1(3)
+#define M_DMA_HWM_INT_EN _SB_MAKEMASK1(4)
+#define M_DMA_LWM_INT_EN _SB_MAKEMASK1(5)
+#define M_DMA_TBX_EN _SB_MAKEMASK1(6)
+#define M_DMA_TDX_EN _SB_MAKEMASK1(7)
+
+#define S_DMA_INT_PKTCNT _SB_MAKE64(8)
+#define M_DMA_INT_PKTCNT _SB_MAKEMASK(8, S_DMA_INT_PKTCNT)
+#define V_DMA_INT_PKTCNT(x) _SB_MAKEVALUE(x, S_DMA_INT_PKTCNT)
+#define G_DMA_INT_PKTCNT(x) _SB_GETVALUE(x, S_DMA_INT_PKTCNT, M_DMA_INT_PKTCNT)
+
+#define S_DMA_RINGSZ _SB_MAKE64(16)
+#define M_DMA_RINGSZ _SB_MAKEMASK(16, S_DMA_RINGSZ)
+#define V_DMA_RINGSZ(x) _SB_MAKEVALUE(x, S_DMA_RINGSZ)
+#define G_DMA_RINGSZ(x) _SB_GETVALUE(x, S_DMA_RINGSZ, M_DMA_RINGSZ)
+
+#define S_DMA_HIGH_WATERMARK _SB_MAKE64(32)
+#define M_DMA_HIGH_WATERMARK _SB_MAKEMASK(16, S_DMA_HIGH_WATERMARK)
+#define V_DMA_HIGH_WATERMARK(x) _SB_MAKEVALUE(x, S_DMA_HIGH_WATERMARK)
+#define G_DMA_HIGH_WATERMARK(x) _SB_GETVALUE(x, S_DMA_HIGH_WATERMARK, M_DMA_HIGH_WATERMARK)
+
+#define S_DMA_LOW_WATERMARK _SB_MAKE64(48)
+#define M_DMA_LOW_WATERMARK _SB_MAKEMASK(16, S_DMA_LOW_WATERMARK)
+#define V_DMA_LOW_WATERMARK(x) _SB_MAKEVALUE(x, S_DMA_LOW_WATERMARK)
+#define G_DMA_LOW_WATERMARK(x) _SB_GETVALUE(x, S_DMA_LOW_WATERMARK, M_DMA_LOW_WATERMARK)
+
+/*
+ * Ethernet and Serial DMA Configuration Register 1 (Table 7-5)
+ * Registers: DMA_CONFIG1_MAC_x_RX_CH_0
+ * Registers: DMA_CONFIG1_DMA_x_TX_CH_0
+ * Registers: DMA_CONFIG1_SER_x_RX
+ * Registers: DMA_CONFIG1_SER_x_TX
+ */
+
+#define M_DMA_HDR_CF_EN _SB_MAKEMASK1(0)
+#define M_DMA_ASIC_XFR_EN _SB_MAKEMASK1(1)
+#define M_DMA_PRE_ADDR_EN _SB_MAKEMASK1(2)
+#define M_DMA_FLOW_CTL_EN _SB_MAKEMASK1(3)
+#define M_DMA_NO_DSCR_UPDT _SB_MAKEMASK1(4)
+#define M_DMA_L2CA _SB_MAKEMASK1(5)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_DMA_RX_XTRA_STATUS _SB_MAKEMASK1(6)
+#define M_DMA_TX_CPU_PAUSE _SB_MAKEMASK1(6)
+#define M_DMA_TX_FC_PAUSE_EN _SB_MAKEMASK1(7)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define M_DMA_MBZ1 _SB_MAKEMASK(6, 15)
+
+#define S_DMA_HDR_SIZE _SB_MAKE64(21)
+#define M_DMA_HDR_SIZE _SB_MAKEMASK(9, S_DMA_HDR_SIZE)
+#define V_DMA_HDR_SIZE(x) _SB_MAKEVALUE(x, S_DMA_HDR_SIZE)
+#define G_DMA_HDR_SIZE(x) _SB_GETVALUE(x, S_DMA_HDR_SIZE, M_DMA_HDR_SIZE)
+
+#define M_DMA_MBZ2 _SB_MAKEMASK(5, 32)
+
+#define S_DMA_ASICXFR_SIZE _SB_MAKE64(37)
+#define M_DMA_ASICXFR_SIZE _SB_MAKEMASK(9, S_DMA_ASICXFR_SIZE)
+#define V_DMA_ASICXFR_SIZE(x) _SB_MAKEVALUE(x, S_DMA_ASICXFR_SIZE)
+#define G_DMA_ASICXFR_SIZE(x) _SB_GETVALUE(x, S_DMA_ASICXFR_SIZE, M_DMA_ASICXFR_SIZE)
+
+#define S_DMA_INT_TIMEOUT _SB_MAKE64(48)
+#define M_DMA_INT_TIMEOUT _SB_MAKEMASK(16, S_DMA_INT_TIMEOUT)
+#define V_DMA_INT_TIMEOUT(x) _SB_MAKEVALUE(x, S_DMA_INT_TIMEOUT)
+#define G_DMA_INT_TIMEOUT(x) _SB_GETVALUE(x, S_DMA_INT_TIMEOUT, M_DMA_INT_TIMEOUT)
+
+/*
+ * Ethernet and Serial DMA Descriptor base address (Table 7-6)
+ */
+
+#define M_DMA_DSCRBASE_MBZ _SB_MAKEMASK(4, 0)
+
+
+/*
+ * ASIC Mode Base Address (Table 7-7)
+ */
+
+#define M_DMA_ASIC_BASE_MBZ _SB_MAKEMASK(20, 0)
+
+/*
+ * DMA Descriptor Count Registers (Table 7-8)
+ */
+
+/* No bitfields */
+
+
+/*
+ * Current Descriptor Address Register (Table 7-11)
+ */
+
+#define S_DMA_CURDSCR_ADDR _SB_MAKE64(0)
+#define M_DMA_CURDSCR_ADDR _SB_MAKEMASK(40, S_DMA_CURDSCR_ADDR)
+#define S_DMA_CURDSCR_COUNT _SB_MAKE64(40)
+#define M_DMA_CURDSCR_COUNT _SB_MAKEMASK(16, S_DMA_CURDSCR_COUNT)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_DMA_TX_CH_PAUSE_ON _SB_MAKEMASK1(56)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+/*
+ * Receive Packet Drop Registers
+ */
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_DMA_OODLOST_RX _SB_MAKE64(0)
+#define M_DMA_OODLOST_RX _SB_MAKEMASK(16, S_DMA_OODLOST_RX)
+#define G_DMA_OODLOST_RX(x) _SB_GETVALUE(x, S_DMA_OODLOST_RX, M_DMA_OODLOST_RX)
+
+#define S_DMA_EOP_COUNT_RX _SB_MAKE64(16)
+#define M_DMA_EOP_COUNT_RX _SB_MAKEMASK(8, S_DMA_EOP_COUNT_RX)
+#define G_DMA_EOP_COUNT_RX(x) _SB_GETVALUE(x, S_DMA_EOP_COUNT_RX, M_DMA_EOP_COUNT_RX)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+/* *********************************************************************
+ * DMA Descriptors
+ ********************************************************************* */
+
+/*
+ * Descriptor doubleword "A" (Table 7-12)
+ */
+
+#define S_DMA_DSCRA_OFFSET _SB_MAKE64(0)
+#define M_DMA_DSCRA_OFFSET _SB_MAKEMASK(5, S_DMA_DSCRA_OFFSET)
+#define V_DMA_DSCRA_OFFSET(x) _SB_MAKEVALUE(x, S_DMA_DSCRA_OFFSET)
+#define G_DMA_DSCRA_OFFSET(x) _SB_GETVALUE(x, S_DMA_DSCRA_OFFSET, M_DMA_DSCRA_OFFSET)
+
+/* Note: Don't shift the address over, just mask it with the mask below */
+#define S_DMA_DSCRA_A_ADDR _SB_MAKE64(5)
+#define M_DMA_DSCRA_A_ADDR _SB_MAKEMASK(35, S_DMA_DSCRA_A_ADDR)
+
+#define M_DMA_DSCRA_A_ADDR_OFFSET (M_DMA_DSCRA_OFFSET | M_DMA_DSCRA_A_ADDR)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_DMA_DSCRA_A_ADDR_UA _SB_MAKE64(0)
+#define M_DMA_DSCRA_A_ADDR_UA _SB_MAKEMASK(40, S_DMA_DSCRA_A_ADDR_UA)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define S_DMA_DSCRA_A_SIZE _SB_MAKE64(40)
+#define M_DMA_DSCRA_A_SIZE _SB_MAKEMASK(9, S_DMA_DSCRA_A_SIZE)
+#define V_DMA_DSCRA_A_SIZE(x) _SB_MAKEVALUE(x, S_DMA_DSCRA_A_SIZE)
+#define G_DMA_DSCRA_A_SIZE(x) _SB_GETVALUE(x, S_DMA_DSCRA_A_SIZE, M_DMA_DSCRA_A_SIZE)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_DMA_DSCRA_DSCR_CNT _SB_MAKE64(40)
+#define M_DMA_DSCRA_DSCR_CNT _SB_MAKEMASK(8, S_DMA_DSCRA_DSCR_CNT)
+#define G_DMA_DSCRA_DSCR_CNT(x) _SB_GETVALUE(x, S_DMA_DSCRA_DSCR_CNT, M_DMA_DSCRA_DSCR_CNT)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define M_DMA_DSCRA_INTERRUPT _SB_MAKEMASK1(49)
+#define M_DMA_DSCRA_OFFSETB _SB_MAKEMASK1(50)
+
+#define S_DMA_DSCRA_STATUS _SB_MAKE64(51)
+#define M_DMA_DSCRA_STATUS _SB_MAKEMASK(13, S_DMA_DSCRA_STATUS)
+#define V_DMA_DSCRA_STATUS(x) _SB_MAKEVALUE(x, S_DMA_DSCRA_STATUS)
+#define G_DMA_DSCRA_STATUS(x) _SB_GETVALUE(x, S_DMA_DSCRA_STATUS, M_DMA_DSCRA_STATUS)
+
+/*
+ * Descriptor doubleword "B" (Table 7-13)
+ */
+
+
+#define S_DMA_DSCRB_OPTIONS _SB_MAKE64(0)
+#define M_DMA_DSCRB_OPTIONS _SB_MAKEMASK(4, S_DMA_DSCRB_OPTIONS)
+#define V_DMA_DSCRB_OPTIONS(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_OPTIONS)
+#define G_DMA_DSCRB_OPTIONS(x) _SB_GETVALUE(x, S_DMA_DSCRB_OPTIONS, M_DMA_DSCRB_OPTIONS)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_DMA_DSCRB_A_SIZE _SB_MAKE64(8)
+#define M_DMA_DSCRB_A_SIZE _SB_MAKEMASK(14, S_DMA_DSCRB_A_SIZE)
+#define V_DMA_DSCRB_A_SIZE(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_A_SIZE)
+#define G_DMA_DSCRB_A_SIZE(x) _SB_GETVALUE(x, S_DMA_DSCRB_A_SIZE, M_DMA_DSCRB_A_SIZE)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define R_DMA_DSCRB_ADDR _SB_MAKE64(0x10)
+
+/* Note: Don't shift the address over, just mask it with the mask below */
+#define S_DMA_DSCRB_B_ADDR _SB_MAKE64(5)
+#define M_DMA_DSCRB_B_ADDR _SB_MAKEMASK(35, S_DMA_DSCRB_B_ADDR)
+
+#define S_DMA_DSCRB_B_SIZE _SB_MAKE64(40)
+#define M_DMA_DSCRB_B_SIZE _SB_MAKEMASK(9, S_DMA_DSCRB_B_SIZE)
+#define V_DMA_DSCRB_B_SIZE(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_B_SIZE)
+#define G_DMA_DSCRB_B_SIZE(x) _SB_GETVALUE(x, S_DMA_DSCRB_B_SIZE, M_DMA_DSCRB_B_SIZE)
+
+#define M_DMA_DSCRB_B_VALID _SB_MAKEMASK1(49)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_DMA_DSCRB_PKT_SIZE_MSB _SB_MAKE64(48)
+#define M_DMA_DSCRB_PKT_SIZE_MSB _SB_MAKEMASK(2, S_DMA_DSCRB_PKT_SIZE_MSB)
+#define V_DMA_DSCRB_PKT_SIZE_MSB(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_PKT_SIZE_MSB)
+#define G_DMA_DSCRB_PKT_SIZE_MSB(x) _SB_GETVALUE(x, S_DMA_DSCRB_PKT_SIZE_MSB, M_DMA_DSCRB_PKT_SIZE_MSB)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define S_DMA_DSCRB_PKT_SIZE _SB_MAKE64(50)
+#define M_DMA_DSCRB_PKT_SIZE _SB_MAKEMASK(14, S_DMA_DSCRB_PKT_SIZE)
+#define V_DMA_DSCRB_PKT_SIZE(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_PKT_SIZE)
+#define G_DMA_DSCRB_PKT_SIZE(x) _SB_GETVALUE(x, S_DMA_DSCRB_PKT_SIZE, M_DMA_DSCRB_PKT_SIZE)
+
+/*
+ * from pass2 some bits in dscr_b are also used for rx status
+ */
+#define S_DMA_DSCRB_STATUS _SB_MAKE64(0)
+#define M_DMA_DSCRB_STATUS _SB_MAKEMASK(1, S_DMA_DSCRB_STATUS)
+#define V_DMA_DSCRB_STATUS(x) _SB_MAKEVALUE(x, S_DMA_DSCRB_STATUS)
+#define G_DMA_DSCRB_STATUS(x) _SB_GETVALUE(x, S_DMA_DSCRB_STATUS, M_DMA_DSCRB_STATUS)
+
+/*
+ * Ethernet Descriptor Status Bits (Table 7-15)
+ */
+
+#define M_DMA_ETHRX_BADIP4CS _SB_MAKEMASK1(51)
+#define M_DMA_ETHRX_DSCRERR _SB_MAKEMASK1(52)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+/* Note: This bit is in the DSCR_B options field */
+#define M_DMA_ETHRX_BADTCPCS _SB_MAKEMASK1(0)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+/* Note: These bits are in the DSCR_B options field */
+#define M_DMA_ETH_VLAN_FLAG _SB_MAKEMASK1(1)
+#define M_DMA_ETH_CRC_FLAG _SB_MAKEMASK1(2)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define S_DMA_ETHRX_RXCH 53
+#define M_DMA_ETHRX_RXCH _SB_MAKEMASK(2, S_DMA_ETHRX_RXCH)
+#define V_DMA_ETHRX_RXCH(x) _SB_MAKEVALUE(x, S_DMA_ETHRX_RXCH)
+#define G_DMA_ETHRX_RXCH(x) _SB_GETVALUE(x, S_DMA_ETHRX_RXCH, M_DMA_ETHRX_RXCH)
+
+#define S_DMA_ETHRX_PKTTYPE 55
+#define M_DMA_ETHRX_PKTTYPE _SB_MAKEMASK(3, S_DMA_ETHRX_PKTTYPE)
+#define V_DMA_ETHRX_PKTTYPE(x) _SB_MAKEVALUE(x, S_DMA_ETHRX_PKTTYPE)
+#define G_DMA_ETHRX_PKTTYPE(x) _SB_GETVALUE(x, S_DMA_ETHRX_PKTTYPE, M_DMA_ETHRX_PKTTYPE)
+
+#define K_DMA_ETHRX_PKTTYPE_IPV4 0
+#define K_DMA_ETHRX_PKTTYPE_ARPV4 1
+#define K_DMA_ETHRX_PKTTYPE_802 2
+#define K_DMA_ETHRX_PKTTYPE_OTHER 3
+#define K_DMA_ETHRX_PKTTYPE_USER0 4
+#define K_DMA_ETHRX_PKTTYPE_USER1 5
+#define K_DMA_ETHRX_PKTTYPE_USER2 6
+#define K_DMA_ETHRX_PKTTYPE_USER3 7
+
+#define M_DMA_ETHRX_MATCH_HASH _SB_MAKEMASK1(58)
+#define M_DMA_ETHRX_MATCH_EXACT _SB_MAKEMASK1(59)
+#define M_DMA_ETHRX_BCAST _SB_MAKEMASK1(60)
+#define M_DMA_ETHRX_MCAST _SB_MAKEMASK1(61)
+#define M_DMA_ETHRX_BAD _SB_MAKEMASK1(62)
+#define M_DMA_ETHRX_SOP _SB_MAKEMASK1(63)
+
+/*
+ * Ethernet Transmit Status Bits (Table 7-16)
+ */
+
+#define M_DMA_ETHTX_SOP _SB_MAKEMASK1(63)
+
+/*
+ * Ethernet Transmit Options (Table 7-17)
+ */
+
+#define K_DMA_ETHTX_NOTSOP _SB_MAKE64(0x00)
+#define K_DMA_ETHTX_APPENDCRC _SB_MAKE64(0x01)
+#define K_DMA_ETHTX_REPLACECRC _SB_MAKE64(0x02)
+#define K_DMA_ETHTX_APPENDCRC_APPENDPAD _SB_MAKE64(0x03)
+#define K_DMA_ETHTX_APPENDVLAN_REPLACECRC _SB_MAKE64(0x04)
+#define K_DMA_ETHTX_REMOVEVLAN_REPLACECRC _SB_MAKE64(0x05)
+#define K_DMA_ETHTX_REPLACEVLAN_REPLACECRC _SB_MAKE64(0x6)
+#define K_DMA_ETHTX_NOMODS _SB_MAKE64(0x07)
+#define K_DMA_ETHTX_RESERVED1 _SB_MAKE64(0x08)
+#define K_DMA_ETHTX_REPLACESADDR_APPENDCRC _SB_MAKE64(0x09)
+#define K_DMA_ETHTX_REPLACESADDR_REPLACECRC _SB_MAKE64(0x0A)
+#define K_DMA_ETHTX_REPLACESADDR_APPENDCRC_APPENDPAD _SB_MAKE64(0x0B)
+#define K_DMA_ETHTX_REPLACESADDR_APPENDVLAN_REPLACECRC _SB_MAKE64(0x0C)
+#define K_DMA_ETHTX_REPLACESADDR_REMOVEVLAN_REPLACECRC _SB_MAKE64(0x0D)
+#define K_DMA_ETHTX_REPLACESADDR_REPLACEVLAN_REPLACECRC _SB_MAKE64(0x0E)
+#define K_DMA_ETHTX_RESERVED2 _SB_MAKE64(0x0F)
+
+/*
+ * Serial Receive Options (Table 7-18)
+ */
+#define M_DMA_SERRX_CRC_ERROR _SB_MAKEMASK1(56)
+#define M_DMA_SERRX_ABORT _SB_MAKEMASK1(57)
+#define M_DMA_SERRX_OCTET_ERROR _SB_MAKEMASK1(58)
+#define M_DMA_SERRX_LONGFRAME_ERROR _SB_MAKEMASK1(59)
+#define M_DMA_SERRX_SHORTFRAME_ERROR _SB_MAKEMASK1(60)
+#define M_DMA_SERRX_OVERRUN_ERROR _SB_MAKEMASK1(61)
+#define M_DMA_SERRX_GOOD _SB_MAKEMASK1(62)
+#define M_DMA_SERRX_SOP _SB_MAKEMASK1(63)
+
+/*
+ * Serial Transmit Status Bits (Table 7-20)
+ */
+
+#define M_DMA_SERTX_FLAG _SB_MAKEMASK1(63)
+
+/*
+ * Serial Transmit Options (Table 7-21)
+ */
+
+#define K_DMA_SERTX_RESERVED _SB_MAKEMASK1(0)
+#define K_DMA_SERTX_APPENDCRC _SB_MAKEMASK1(1)
+#define K_DMA_SERTX_APPENDPAD _SB_MAKEMASK1(2)
+#define K_DMA_SERTX_ABORT _SB_MAKEMASK1(3)
+
+
+/* *********************************************************************
+ * Data Mover Registers
+ ********************************************************************* */
+
+/*
+ * Data Mover Descriptor Base Address Register (Table 7-22)
+ * Register: DM_DSCR_BASE_0
+ * Register: DM_DSCR_BASE_1
+ * Register: DM_DSCR_BASE_2
+ * Register: DM_DSCR_BASE_3
+ */
+
+#define M_DM_DSCR_BASE_MBZ _SB_MAKEMASK(4, 0)
+
+/* Note: Just mask the base address and then OR it in. */
+#define S_DM_DSCR_BASE_ADDR _SB_MAKE64(4)
+#define M_DM_DSCR_BASE_ADDR _SB_MAKEMASK(36, S_DM_DSCR_BASE_ADDR)
+
+#define S_DM_DSCR_BASE_RINGSZ _SB_MAKE64(40)
+#define M_DM_DSCR_BASE_RINGSZ _SB_MAKEMASK(16, S_DM_DSCR_BASE_RINGSZ)
+#define V_DM_DSCR_BASE_RINGSZ(x) _SB_MAKEVALUE(x, S_DM_DSCR_BASE_RINGSZ)
+#define G_DM_DSCR_BASE_RINGSZ(x) _SB_GETVALUE(x, S_DM_DSCR_BASE_RINGSZ, M_DM_DSCR_BASE_RINGSZ)
+
+#define S_DM_DSCR_BASE_PRIORITY _SB_MAKE64(56)
+#define M_DM_DSCR_BASE_PRIORITY _SB_MAKEMASK(3, S_DM_DSCR_BASE_PRIORITY)
+#define V_DM_DSCR_BASE_PRIORITY(x) _SB_MAKEVALUE(x, S_DM_DSCR_BASE_PRIORITY)
+#define G_DM_DSCR_BASE_PRIORITY(x) _SB_GETVALUE(x, S_DM_DSCR_BASE_PRIORITY, M_DM_DSCR_BASE_PRIORITY)
+
+#define K_DM_DSCR_BASE_PRIORITY_1 0
+#define K_DM_DSCR_BASE_PRIORITY_2 1
+#define K_DM_DSCR_BASE_PRIORITY_4 2
+#define K_DM_DSCR_BASE_PRIORITY_8 3
+#define K_DM_DSCR_BASE_PRIORITY_16 4
+
+#define M_DM_DSCR_BASE_ACTIVE _SB_MAKEMASK1(59)
+#define M_DM_DSCR_BASE_INTERRUPT _SB_MAKEMASK1(60)
+#define M_DM_DSCR_BASE_RESET _SB_MAKEMASK1(61) /* write register */
+#define M_DM_DSCR_BASE_ERROR _SB_MAKEMASK1(61) /* read register */
+#define M_DM_DSCR_BASE_ABORT _SB_MAKEMASK1(62)
+#define M_DM_DSCR_BASE_ENABL _SB_MAKEMASK1(63)
+
+/*
+ * Data Mover Descriptor Count Register (Table 7-25)
+ */
+
+/* no bitfields */
+
+/*
+ * Data Mover Current Descriptor Address (Table 7-24)
+ * Register: DM_CUR_DSCR_ADDR_0
+ * Register: DM_CUR_DSCR_ADDR_1
+ * Register: DM_CUR_DSCR_ADDR_2
+ * Register: DM_CUR_DSCR_ADDR_3
+ */
+
+#define S_DM_CUR_DSCR_DSCR_ADDR _SB_MAKE64(0)
+#define M_DM_CUR_DSCR_DSCR_ADDR _SB_MAKEMASK(40, S_DM_CUR_DSCR_DSCR_ADDR)
+
+#define S_DM_CUR_DSCR_DSCR_COUNT _SB_MAKE64(48)
+#define M_DM_CUR_DSCR_DSCR_COUNT _SB_MAKEMASK(16, S_DM_CUR_DSCR_DSCR_COUNT)
+#define V_DM_CUR_DSCR_DSCR_COUNT(r) _SB_MAKEVALUE(r, S_DM_CUR_DSCR_DSCR_COUNT)
+#define G_DM_CUR_DSCR_DSCR_COUNT(r) _SB_GETVALUE(r, S_DM_CUR_DSCR_DSCR_COUNT,\
+ M_DM_CUR_DSCR_DSCR_COUNT)
+
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+/*
+ * Data Mover Channel Partial Result Registers
+ * Register: DM_PARTIAL_0
+ * Register: DM_PARTIAL_1
+ * Register: DM_PARTIAL_2
+ * Register: DM_PARTIAL_3
+ */
+#define S_DM_PARTIAL_CRC_PARTIAL _SB_MAKE64(0)
+#define M_DM_PARTIAL_CRC_PARTIAL _SB_MAKEMASK(32, S_DM_PARTIAL_CRC_PARTIAL)
+#define V_DM_PARTIAL_CRC_PARTIAL(r) _SB_MAKEVALUE(r, S_DM_PARTIAL_CRC_PARTIAL)
+#define G_DM_PARTIAL_CRC_PARTIAL(r) _SB_GETVALUE(r, S_DM_PARTIAL_CRC_PARTIAL,\
+ M_DM_PARTIAL_CRC_PARTIAL)
+
+#define S_DM_PARTIAL_TCPCS_PARTIAL _SB_MAKE64(32)
+#define M_DM_PARTIAL_TCPCS_PARTIAL _SB_MAKEMASK(16, S_DM_PARTIAL_TCPCS_PARTIAL)
+#define V_DM_PARTIAL_TCPCS_PARTIAL(r) _SB_MAKEVALUE(r, S_DM_PARTIAL_TCPCS_PARTIAL)
+#define G_DM_PARTIAL_TCPCS_PARTIAL(r) _SB_GETVALUE(r, S_DM_PARTIAL_TCPCS_PARTIAL,\
+ M_DM_PARTIAL_TCPCS_PARTIAL)
+
+#define M_DM_PARTIAL_ODD_BYTE _SB_MAKEMASK1(48)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+/*
+ * Data Mover CRC Definition Registers
+ * Register: CRC_DEF_0
+ * Register: CRC_DEF_1
+ */
+#define S_CRC_DEF_CRC_INIT _SB_MAKE64(0)
+#define M_CRC_DEF_CRC_INIT _SB_MAKEMASK(32, S_CRC_DEF_CRC_INIT)
+#define V_CRC_DEF_CRC_INIT(r) _SB_MAKEVALUE(r, S_CRC_DEF_CRC_INIT)
+#define G_CRC_DEF_CRC_INIT(r) _SB_GETVALUE(r, S_CRC_DEF_CRC_INIT,\
+ M_CRC_DEF_CRC_INIT)
+
+#define S_CRC_DEF_CRC_POLY _SB_MAKE64(32)
+#define M_CRC_DEF_CRC_POLY _SB_MAKEMASK(32, S_CRC_DEF_CRC_POLY)
+#define V_CRC_DEF_CRC_POLY(r) _SB_MAKEVALUE(r, S_CRC_DEF_CRC_POLY)
+#define G_CRC_DEF_CRC_POLY(r) _SB_GETVALUE(r, S_CRC_DEF_CRC_POLY,\
+ M_CRC_DEF_CRC_POLY)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+/*
+ * Data Mover CRC/Checksum Definition Registers
+ * Register: CTCP_DEF_0
+ * Register: CTCP_DEF_1
+ */
+#define S_CTCP_DEF_CRC_TXOR _SB_MAKE64(0)
+#define M_CTCP_DEF_CRC_TXOR _SB_MAKEMASK(32, S_CTCP_DEF_CRC_TXOR)
+#define V_CTCP_DEF_CRC_TXOR(r) _SB_MAKEVALUE(r, S_CTCP_DEF_CRC_TXOR)
+#define G_CTCP_DEF_CRC_TXOR(r) _SB_GETVALUE(r, S_CTCP_DEF_CRC_TXOR,\
+ M_CTCP_DEF_CRC_TXOR)
+
+#define S_CTCP_DEF_TCPCS_INIT _SB_MAKE64(32)
+#define M_CTCP_DEF_TCPCS_INIT _SB_MAKEMASK(16, S_CTCP_DEF_TCPCS_INIT)
+#define V_CTCP_DEF_TCPCS_INIT(r) _SB_MAKEVALUE(r, S_CTCP_DEF_TCPCS_INIT)
+#define G_CTCP_DEF_TCPCS_INIT(r) _SB_GETVALUE(r, S_CTCP_DEF_TCPCS_INIT,\
+ M_CTCP_DEF_TCPCS_INIT)
+
+#define S_CTCP_DEF_CRC_WIDTH _SB_MAKE64(48)
+#define M_CTCP_DEF_CRC_WIDTH _SB_MAKEMASK(2, S_CTCP_DEF_CRC_WIDTH)
+#define V_CTCP_DEF_CRC_WIDTH(r) _SB_MAKEVALUE(r, S_CTCP_DEF_CRC_WIDTH)
+#define G_CTCP_DEF_CRC_WIDTH(r) _SB_GETVALUE(r, S_CTCP_DEF_CRC_WIDTH,\
+ M_CTCP_DEF_CRC_WIDTH)
+
+#define K_CTCP_DEF_CRC_WIDTH_4 0
+#define K_CTCP_DEF_CRC_WIDTH_2 1
+#define K_CTCP_DEF_CRC_WIDTH_1 2
+
+#define M_CTCP_DEF_CRC_BIT_ORDER _SB_MAKEMASK1(50)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+
+/*
+ * Data Mover Descriptor Doubleword "A" (Table 7-26)
+ */
+
+#define S_DM_DSCRA_DST_ADDR _SB_MAKE64(0)
+#define M_DM_DSCRA_DST_ADDR _SB_MAKEMASK(40, S_DM_DSCRA_DST_ADDR)
+
+#define M_DM_DSCRA_UN_DEST _SB_MAKEMASK1(40)
+#define M_DM_DSCRA_UN_SRC _SB_MAKEMASK1(41)
+#define M_DM_DSCRA_INTERRUPT _SB_MAKEMASK1(42)
+#if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1)
+#define M_DM_DSCRA_THROTTLE _SB_MAKEMASK1(43)
+#endif /* up to 1250 PASS1 */
+
+#define S_DM_DSCRA_DIR_DEST _SB_MAKE64(44)
+#define M_DM_DSCRA_DIR_DEST _SB_MAKEMASK(2, S_DM_DSCRA_DIR_DEST)
+#define V_DM_DSCRA_DIR_DEST(x) _SB_MAKEVALUE(x, S_DM_DSCRA_DIR_DEST)
+#define G_DM_DSCRA_DIR_DEST(x) _SB_GETVALUE(x, S_DM_DSCRA_DIR_DEST, M_DM_DSCRA_DIR_DEST)
+
+#define K_DM_DSCRA_DIR_DEST_INCR 0
+#define K_DM_DSCRA_DIR_DEST_DECR 1
+#define K_DM_DSCRA_DIR_DEST_CONST 2
+
+#define V_DM_DSCRA_DIR_DEST_INCR _SB_MAKEVALUE(K_DM_DSCRA_DIR_DEST_INCR, S_DM_DSCRA_DIR_DEST)
+#define V_DM_DSCRA_DIR_DEST_DECR _SB_MAKEVALUE(K_DM_DSCRA_DIR_DEST_DECR, S_DM_DSCRA_DIR_DEST)
+#define V_DM_DSCRA_DIR_DEST_CONST _SB_MAKEVALUE(K_DM_DSCRA_DIR_DEST_CONST, S_DM_DSCRA_DIR_DEST)
+
+#define S_DM_DSCRA_DIR_SRC _SB_MAKE64(46)
+#define M_DM_DSCRA_DIR_SRC _SB_MAKEMASK(2, S_DM_DSCRA_DIR_SRC)
+#define V_DM_DSCRA_DIR_SRC(x) _SB_MAKEVALUE(x, S_DM_DSCRA_DIR_SRC)
+#define G_DM_DSCRA_DIR_SRC(x) _SB_GETVALUE(x, S_DM_DSCRA_DIR_SRC, M_DM_DSCRA_DIR_SRC)
+
+#define K_DM_DSCRA_DIR_SRC_INCR 0
+#define K_DM_DSCRA_DIR_SRC_DECR 1
+#define K_DM_DSCRA_DIR_SRC_CONST 2
+
+#define V_DM_DSCRA_DIR_SRC_INCR _SB_MAKEVALUE(K_DM_DSCRA_DIR_SRC_INCR, S_DM_DSCRA_DIR_SRC)
+#define V_DM_DSCRA_DIR_SRC_DECR _SB_MAKEVALUE(K_DM_DSCRA_DIR_SRC_DECR, S_DM_DSCRA_DIR_SRC)
+#define V_DM_DSCRA_DIR_SRC_CONST _SB_MAKEVALUE(K_DM_DSCRA_DIR_SRC_CONST, S_DM_DSCRA_DIR_SRC)
+
+
+#define M_DM_DSCRA_ZERO_MEM _SB_MAKEMASK1(48)
+#define M_DM_DSCRA_PREFETCH _SB_MAKEMASK1(49)
+#define M_DM_DSCRA_L2C_DEST _SB_MAKEMASK1(50)
+#define M_DM_DSCRA_L2C_SRC _SB_MAKEMASK1(51)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_DM_DSCRA_RD_BKOFF _SB_MAKEMASK1(52)
+#define M_DM_DSCRA_WR_BKOFF _SB_MAKEMASK1(53)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_DM_DSCRA_TCPCS_EN _SB_MAKEMASK1(54)
+#define M_DM_DSCRA_TCPCS_RES _SB_MAKEMASK1(55)
+#define M_DM_DSCRA_TCPCS_AP _SB_MAKEMASK1(56)
+#define M_DM_DSCRA_CRC_EN _SB_MAKEMASK1(57)
+#define M_DM_DSCRA_CRC_RES _SB_MAKEMASK1(58)
+#define M_DM_DSCRA_CRC_AP _SB_MAKEMASK1(59)
+#define M_DM_DSCRA_CRC_DFN _SB_MAKEMASK1(60)
+#define M_DM_DSCRA_CRC_XBIT _SB_MAKEMASK1(61)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define M_DM_DSCRA_RESERVED2 _SB_MAKEMASK(3, 61)
+
+/*
+ * Data Mover Descriptor Doubleword "B" (Table 7-25)
+ */
+
+#define S_DM_DSCRB_SRC_ADDR _SB_MAKE64(0)
+#define M_DM_DSCRB_SRC_ADDR _SB_MAKEMASK(40, S_DM_DSCRB_SRC_ADDR)
+
+#define S_DM_DSCRB_SRC_LENGTH _SB_MAKE64(40)
+#define M_DM_DSCRB_SRC_LENGTH _SB_MAKEMASK(20, S_DM_DSCRB_SRC_LENGTH)
+#define V_DM_DSCRB_SRC_LENGTH(x) _SB_MAKEVALUE(x, S_DM_DSCRB_SRC_LENGTH)
+#define G_DM_DSCRB_SRC_LENGTH(x) _SB_GETVALUE(x, S_DM_DSCRB_SRC_LENGTH, M_DM_DSCRB_SRC_LENGTH)
+
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_genbus.h b/arch/mips/include/asm/sibyte/sb1250_genbus.h
new file mode 100644
index 00000000000..94e9c7c8e78
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_genbus.h
@@ -0,0 +1,474 @@
+/* *********************************************************************
+ * SB1250 Board Support Package
+ *
+ * Generic Bus Constants File: sb1250_genbus.h
+ *
+ * This module contains constants and macros useful for
+ * manipulating the SB1250's Generic Bus interface
+ *
+ * SB1250 specification level: User's manual 10/21/02
+ * BCM1280 specification level: User's Manual 11/14/03
+ *
+ *********************************************************************
+ *
+ * Copyright 2000, 2001, 2002, 2003
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+
+#ifndef _SB1250_GENBUS_H
+#define _SB1250_GENBUS_H
+
+#include "sb1250_defs.h"
+
+/*
+ * Generic Bus Region Configuration Registers (Table 11-4)
+ */
+
+#define S_IO_RDY_ACTIVE 0
+#define M_IO_RDY_ACTIVE _SB_MAKEMASK1(S_IO_RDY_ACTIVE)
+
+#define S_IO_ENA_RDY 1
+#define M_IO_ENA_RDY _SB_MAKEMASK1(S_IO_ENA_RDY)
+
+#define S_IO_WIDTH_SEL 2
+#define M_IO_WIDTH_SEL _SB_MAKEMASK(2, S_IO_WIDTH_SEL)
+#define K_IO_WIDTH_SEL_1 0
+#define K_IO_WIDTH_SEL_2 1
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
+ || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define K_IO_WIDTH_SEL_1L 2
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+#define K_IO_WIDTH_SEL_4 3
+#define V_IO_WIDTH_SEL(x) _SB_MAKEVALUE(x, S_IO_WIDTH_SEL)
+#define G_IO_WIDTH_SEL(x) _SB_GETVALUE(x, S_IO_WIDTH_SEL, M_IO_WIDTH_SEL)
+
+#define S_IO_PARITY_ENA 4
+#define M_IO_PARITY_ENA _SB_MAKEMASK1(S_IO_PARITY_ENA)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
+ || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_IO_BURST_EN 5
+#define M_IO_BURST_EN _SB_MAKEMASK1(S_IO_BURST_EN)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+#define S_IO_PARITY_ODD 6
+#define M_IO_PARITY_ODD _SB_MAKEMASK1(S_IO_PARITY_ODD)
+#define S_IO_NONMUX 7
+#define M_IO_NONMUX _SB_MAKEMASK1(S_IO_NONMUX)
+
+#define S_IO_TIMEOUT 8
+#define M_IO_TIMEOUT _SB_MAKEMASK(8, S_IO_TIMEOUT)
+#define V_IO_TIMEOUT(x) _SB_MAKEVALUE(x, S_IO_TIMEOUT)
+#define G_IO_TIMEOUT(x) _SB_GETVALUE(x, S_IO_TIMEOUT, M_IO_TIMEOUT)
+
+/*
+ * Generic Bus Region Size register (Table 11-5)
+ */
+
+#define S_IO_MULT_SIZE 0
+#define M_IO_MULT_SIZE _SB_MAKEMASK(12, S_IO_MULT_SIZE)
+#define V_IO_MULT_SIZE(x) _SB_MAKEVALUE(x, S_IO_MULT_SIZE)
+#define G_IO_MULT_SIZE(x) _SB_GETVALUE(x, S_IO_MULT_SIZE, M_IO_MULT_SIZE)
+
+#define S_IO_REGSIZE 16 /* # bits to shift size for this reg */
+
+/*
+ * Generic Bus Region Address (Table 11-6)
+ */
+
+#define S_IO_START_ADDR 0
+#define M_IO_START_ADDR _SB_MAKEMASK(14, S_IO_START_ADDR)
+#define V_IO_START_ADDR(x) _SB_MAKEVALUE(x, S_IO_START_ADDR)
+#define G_IO_START_ADDR(x) _SB_GETVALUE(x, S_IO_START_ADDR, M_IO_START_ADDR)
+
+#define S_IO_ADDRBASE 16 /* # bits to shift addr for this reg */
+
+#define M_IO_BLK_CACHE _SB_MAKEMASK1(15)
+
+
+/*
+ * Generic Bus Timing 0 Registers (Table 11-7)
+ */
+
+#define S_IO_ALE_WIDTH 0
+#define M_IO_ALE_WIDTH _SB_MAKEMASK(3, S_IO_ALE_WIDTH)
+#define V_IO_ALE_WIDTH(x) _SB_MAKEVALUE(x, S_IO_ALE_WIDTH)
+#define G_IO_ALE_WIDTH(x) _SB_GETVALUE(x, S_IO_ALE_WIDTH, M_IO_ALE_WIDTH)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
+ || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_IO_EARLY_CS _SB_MAKEMASK1(3)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+#define S_IO_ALE_TO_CS 4
+#define M_IO_ALE_TO_CS _SB_MAKEMASK(2, S_IO_ALE_TO_CS)
+#define V_IO_ALE_TO_CS(x) _SB_MAKEVALUE(x, S_IO_ALE_TO_CS)
+#define G_IO_ALE_TO_CS(x) _SB_GETVALUE(x, S_IO_ALE_TO_CS, M_IO_ALE_TO_CS)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
+ || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_IO_BURST_WIDTH _SB_MAKE64(6)
+#define M_IO_BURST_WIDTH _SB_MAKEMASK(2, S_IO_BURST_WIDTH)
+#define V_IO_BURST_WIDTH(x) _SB_MAKEVALUE(x, S_IO_BURST_WIDTH)
+#define G_IO_BURST_WIDTH(x) _SB_GETVALUE(x, S_IO_BURST_WIDTH, M_IO_BURST_WIDTH)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+#define S_IO_CS_WIDTH 8
+#define M_IO_CS_WIDTH _SB_MAKEMASK(5, S_IO_CS_WIDTH)
+#define V_IO_CS_WIDTH(x) _SB_MAKEVALUE(x, S_IO_CS_WIDTH)
+#define G_IO_CS_WIDTH(x) _SB_GETVALUE(x, S_IO_CS_WIDTH, M_IO_CS_WIDTH)
+
+#define S_IO_RDY_SMPLE 13
+#define M_IO_RDY_SMPLE _SB_MAKEMASK(3, S_IO_RDY_SMPLE)
+#define V_IO_RDY_SMPLE(x) _SB_MAKEVALUE(x, S_IO_RDY_SMPLE)
+#define G_IO_RDY_SMPLE(x) _SB_GETVALUE(x, S_IO_RDY_SMPLE, M_IO_RDY_SMPLE)
+
+
+/*
+ * Generic Bus Timing 1 Registers (Table 11-8)
+ */
+
+#define S_IO_ALE_TO_WRITE 0
+#define M_IO_ALE_TO_WRITE _SB_MAKEMASK(3, S_IO_ALE_TO_WRITE)
+#define V_IO_ALE_TO_WRITE(x) _SB_MAKEVALUE(x, S_IO_ALE_TO_WRITE)
+#define G_IO_ALE_TO_WRITE(x) _SB_GETVALUE(x, S_IO_ALE_TO_WRITE, M_IO_ALE_TO_WRITE)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
+ || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_IO_RDY_SYNC _SB_MAKEMASK1(3)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+#define S_IO_WRITE_WIDTH 4
+#define M_IO_WRITE_WIDTH _SB_MAKEMASK(4, S_IO_WRITE_WIDTH)
+#define V_IO_WRITE_WIDTH(x) _SB_MAKEVALUE(x, S_IO_WRITE_WIDTH)
+#define G_IO_WRITE_WIDTH(x) _SB_GETVALUE(x, S_IO_WRITE_WIDTH, M_IO_WRITE_WIDTH)
+
+#define S_IO_IDLE_CYCLE 8
+#define M_IO_IDLE_CYCLE _SB_MAKEMASK(4, S_IO_IDLE_CYCLE)
+#define V_IO_IDLE_CYCLE(x) _SB_MAKEVALUE(x, S_IO_IDLE_CYCLE)
+#define G_IO_IDLE_CYCLE(x) _SB_GETVALUE(x, S_IO_IDLE_CYCLE, M_IO_IDLE_CYCLE)
+
+#define S_IO_OE_TO_CS 12
+#define M_IO_OE_TO_CS _SB_MAKEMASK(2, S_IO_OE_TO_CS)
+#define V_IO_OE_TO_CS(x) _SB_MAKEVALUE(x, S_IO_OE_TO_CS)
+#define G_IO_OE_TO_CS(x) _SB_GETVALUE(x, S_IO_OE_TO_CS, M_IO_OE_TO_CS)
+
+#define S_IO_CS_TO_OE 14
+#define M_IO_CS_TO_OE _SB_MAKEMASK(2, S_IO_CS_TO_OE)
+#define V_IO_CS_TO_OE(x) _SB_MAKEVALUE(x, S_IO_CS_TO_OE)
+#define G_IO_CS_TO_OE(x) _SB_GETVALUE(x, S_IO_CS_TO_OE, M_IO_CS_TO_OE)
+
+/*
+ * Generic Bus Interrupt Status Register (Table 11-9)
+ */
+
+#define M_IO_CS_ERR_INT _SB_MAKEMASK(0, 8)
+#define M_IO_CS0_ERR_INT _SB_MAKEMASK1(0)
+#define M_IO_CS1_ERR_INT _SB_MAKEMASK1(1)
+#define M_IO_CS2_ERR_INT _SB_MAKEMASK1(2)
+#define M_IO_CS3_ERR_INT _SB_MAKEMASK1(3)
+#define M_IO_CS4_ERR_INT _SB_MAKEMASK1(4)
+#define M_IO_CS5_ERR_INT _SB_MAKEMASK1(5)
+#define M_IO_CS6_ERR_INT _SB_MAKEMASK1(6)
+#define M_IO_CS7_ERR_INT _SB_MAKEMASK1(7)
+
+#define M_IO_RD_PAR_INT _SB_MAKEMASK1(9)
+#define M_IO_TIMEOUT_INT _SB_MAKEMASK1(10)
+#define M_IO_ILL_ADDR_INT _SB_MAKEMASK1(11)
+#define M_IO_MULT_CS_INT _SB_MAKEMASK1(12)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_IO_COH_ERR _SB_MAKEMASK1(14)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+
+/*
+ * Generic Bus Output Drive Control Register 0 (Table 14-18)
+ */
+
+#define S_IO_SLEW0 0
+#define M_IO_SLEW0 _SB_MAKEMASK(2, S_IO_SLEW0)
+#define V_IO_SLEW0(x) _SB_MAKEVALUE(x, S_IO_SLEW0)
+#define G_IO_SLEW0(x) _SB_GETVALUE(x, S_IO_SLEW0, M_IO_SLEW0)
+
+#define S_IO_DRV_A 2
+#define M_IO_DRV_A _SB_MAKEMASK(2, S_IO_DRV_A)
+#define V_IO_DRV_A(x) _SB_MAKEVALUE(x, S_IO_DRV_A)
+#define G_IO_DRV_A(x) _SB_GETVALUE(x, S_IO_DRV_A, M_IO_DRV_A)
+
+#define S_IO_DRV_B 6
+#define M_IO_DRV_B _SB_MAKEMASK(2, S_IO_DRV_B)
+#define V_IO_DRV_B(x) _SB_MAKEVALUE(x, S_IO_DRV_B)
+#define G_IO_DRV_B(x) _SB_GETVALUE(x, S_IO_DRV_B, M_IO_DRV_B)
+
+#define S_IO_DRV_C 10
+#define M_IO_DRV_C _SB_MAKEMASK(2, S_IO_DRV_C)
+#define V_IO_DRV_C(x) _SB_MAKEVALUE(x, S_IO_DRV_C)
+#define G_IO_DRV_C(x) _SB_GETVALUE(x, S_IO_DRV_C, M_IO_DRV_C)
+
+#define S_IO_DRV_D 14
+#define M_IO_DRV_D _SB_MAKEMASK(2, S_IO_DRV_D)
+#define V_IO_DRV_D(x) _SB_MAKEVALUE(x, S_IO_DRV_D)
+#define G_IO_DRV_D(x) _SB_GETVALUE(x, S_IO_DRV_D, M_IO_DRV_D)
+
+/*
+ * Generic Bus Output Drive Control Register 1 (Table 14-19)
+ */
+
+#define S_IO_DRV_E 2
+#define M_IO_DRV_E _SB_MAKEMASK(2, S_IO_DRV_E)
+#define V_IO_DRV_E(x) _SB_MAKEVALUE(x, S_IO_DRV_E)
+#define G_IO_DRV_E(x) _SB_GETVALUE(x, S_IO_DRV_E, M_IO_DRV_E)
+
+#define S_IO_DRV_F 6
+#define M_IO_DRV_F _SB_MAKEMASK(2, S_IO_DRV_F)
+#define V_IO_DRV_F(x) _SB_MAKEVALUE(x, S_IO_DRV_F)
+#define G_IO_DRV_F(x) _SB_GETVALUE(x, S_IO_DRV_F, M_IO_DRV_F)
+
+#define S_IO_SLEW1 8
+#define M_IO_SLEW1 _SB_MAKEMASK(2, S_IO_SLEW1)
+#define V_IO_SLEW1(x) _SB_MAKEVALUE(x, S_IO_SLEW1)
+#define G_IO_SLEW1(x) _SB_GETVALUE(x, S_IO_SLEW1, M_IO_SLEW1)
+
+#define S_IO_DRV_G 10
+#define M_IO_DRV_G _SB_MAKEMASK(2, S_IO_DRV_G)
+#define V_IO_DRV_G(x) _SB_MAKEVALUE(x, S_IO_DRV_G)
+#define G_IO_DRV_G(x) _SB_GETVALUE(x, S_IO_DRV_G, M_IO_DRV_G)
+
+#define S_IO_SLEW2 12
+#define M_IO_SLEW2 _SB_MAKEMASK(2, S_IO_SLEW2)
+#define V_IO_SLEW2(x) _SB_MAKEVALUE(x, S_IO_SLEW2)
+#define G_IO_SLEW2(x) _SB_GETVALUE(x, S_IO_SLEW2, M_IO_SLEW2)
+
+#define S_IO_DRV_H 14
+#define M_IO_DRV_H _SB_MAKEMASK(2, S_IO_DRV_H)
+#define V_IO_DRV_H(x) _SB_MAKEVALUE(x, S_IO_DRV_H)
+#define G_IO_DRV_H(x) _SB_GETVALUE(x, S_IO_DRV_H, M_IO_DRV_H)
+
+/*
+ * Generic Bus Output Drive Control Register 2 (Table 14-20)
+ */
+
+#define S_IO_DRV_J 2
+#define M_IO_DRV_J _SB_MAKEMASK(2, S_IO_DRV_J)
+#define V_IO_DRV_J(x) _SB_MAKEVALUE(x, S_IO_DRV_J)
+#define G_IO_DRV_J(x) _SB_GETVALUE(x, S_IO_DRV_J, M_IO_DRV_J)
+
+#define S_IO_DRV_K 6
+#define M_IO_DRV_K _SB_MAKEMASK(2, S_IO_DRV_K)
+#define V_IO_DRV_K(x) _SB_MAKEVALUE(x, S_IO_DRV_K)
+#define G_IO_DRV_K(x) _SB_GETVALUE(x, S_IO_DRV_K, M_IO_DRV_K)
+
+#define S_IO_DRV_L 10
+#define M_IO_DRV_L _SB_MAKEMASK(2, S_IO_DRV_L)
+#define V_IO_DRV_L(x) _SB_MAKEVALUE(x, S_IO_DRV_L)
+#define G_IO_DRV_L(x) _SB_GETVALUE(x, S_IO_DRV_L, M_IO_DRV_L)
+
+#define S_IO_DRV_M 14
+#define M_IO_DRV_M _SB_MAKEMASK(2, S_IO_DRV_M)
+#define V_IO_DRV_M(x) _SB_MAKEVALUE(x, S_IO_DRV_M)
+#define G_IO_DRV_M(x) _SB_GETVALUE(x, S_IO_DRV_M, M_IO_DRV_M)
+
+/*
+ * Generic Bus Output Drive Control Register 3 (Table 14-21)
+ */
+
+#define S_IO_SLEW3 0
+#define M_IO_SLEW3 _SB_MAKEMASK(2, S_IO_SLEW3)
+#define V_IO_SLEW3(x) _SB_MAKEVALUE(x, S_IO_SLEW3)
+#define G_IO_SLEW3(x) _SB_GETVALUE(x, S_IO_SLEW3, M_IO_SLEW3)
+
+#define S_IO_DRV_N 2
+#define M_IO_DRV_N _SB_MAKEMASK(2, S_IO_DRV_N)
+#define V_IO_DRV_N(x) _SB_MAKEVALUE(x, S_IO_DRV_N)
+#define G_IO_DRV_N(x) _SB_GETVALUE(x, S_IO_DRV_N, M_IO_DRV_N)
+
+#define S_IO_DRV_P 6
+#define M_IO_DRV_P _SB_MAKEMASK(2, S_IO_DRV_P)
+#define V_IO_DRV_P(x) _SB_MAKEVALUE(x, S_IO_DRV_P)
+#define G_IO_DRV_P(x) _SB_GETVALUE(x, S_IO_DRV_P, M_IO_DRV_P)
+
+#define S_IO_DRV_Q 10
+#define M_IO_DRV_Q _SB_MAKEMASK(2, S_IO_DRV_Q)
+#define V_IO_DRV_Q(x) _SB_MAKEVALUE(x, S_IO_DRV_Q)
+#define G_IO_DRV_Q(x) _SB_GETVALUE(x, S_IO_DRV_Q, M_IO_DRV_Q)
+
+#define S_IO_DRV_R 14
+#define M_IO_DRV_R _SB_MAKEMASK(2, S_IO_DRV_R)
+#define V_IO_DRV_R(x) _SB_MAKEVALUE(x, S_IO_DRV_R)
+#define G_IO_DRV_R(x) _SB_GETVALUE(x, S_IO_DRV_R, M_IO_DRV_R)
+
+
+/*
+ * PCMCIA configuration register (Table 12-6)
+ */
+
+#define M_PCMCIA_CFG_ATTRMEM _SB_MAKEMASK1(0)
+#define M_PCMCIA_CFG_3VEN _SB_MAKEMASK1(1)
+#define M_PCMCIA_CFG_5VEN _SB_MAKEMASK1(2)
+#define M_PCMCIA_CFG_VPPEN _SB_MAKEMASK1(3)
+#define M_PCMCIA_CFG_RESET _SB_MAKEMASK1(4)
+#define M_PCMCIA_CFG_APWRONEN _SB_MAKEMASK1(5)
+#define M_PCMCIA_CFG_CDMASK _SB_MAKEMASK1(6)
+#define M_PCMCIA_CFG_WPMASK _SB_MAKEMASK1(7)
+#define M_PCMCIA_CFG_RDYMASK _SB_MAKEMASK1(8)
+#define M_PCMCIA_CFG_PWRCTL _SB_MAKEMASK1(9)
+
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_PCMCIA_MODE 16
+#define M_PCMCIA_MODE _SB_MAKEMASK(3, S_PCMCIA_MODE)
+#define V_PCMCIA_MODE(x) _SB_MAKEVALUE(x, S_PCMCIA_MODE)
+#define G_PCMCIA_MODE(x) _SB_GETVALUE(x, S_PCMCIA_MODE, M_PCMCIA_MODE)
+
+#define K_PCMCIA_MODE_PCMA_NOB 0 /* standard PCMCIA "A", no "B" */
+#define K_PCMCIA_MODE_IDEA_NOB 1 /* IDE "A", no "B" */
+#define K_PCMCIA_MODE_PCMIOA_NOB 2 /* PCMCIA with I/O "A", no "B" */
+#define K_PCMCIA_MODE_PCMA_PCMB 4 /* standard PCMCIA "A", standard PCMCIA "B" */
+#define K_PCMCIA_MODE_IDEA_PCMB 5 /* IDE "A", standard PCMCIA "B" */
+#define K_PCMCIA_MODE_PCMA_IDEB 6 /* standard PCMCIA "A", IDE "B" */
+#define K_PCMCIA_MODE_IDEA_IDEB 7 /* IDE "A", IDE "B" */
+#endif
+
+
+/*
+ * PCMCIA status register (Table 12-7)
+ */
+
+#define M_PCMCIA_STATUS_CD1 _SB_MAKEMASK1(0)
+#define M_PCMCIA_STATUS_CD2 _SB_MAKEMASK1(1)
+#define M_PCMCIA_STATUS_VS1 _SB_MAKEMASK1(2)
+#define M_PCMCIA_STATUS_VS2 _SB_MAKEMASK1(3)
+#define M_PCMCIA_STATUS_WP _SB_MAKEMASK1(4)
+#define M_PCMCIA_STATUS_RDY _SB_MAKEMASK1(5)
+#define M_PCMCIA_STATUS_3VEN _SB_MAKEMASK1(6)
+#define M_PCMCIA_STATUS_5VEN _SB_MAKEMASK1(7)
+#define M_PCMCIA_STATUS_CDCHG _SB_MAKEMASK1(8)
+#define M_PCMCIA_STATUS_WPCHG _SB_MAKEMASK1(9)
+#define M_PCMCIA_STATUS_RDYCHG _SB_MAKEMASK1(10)
+
+/*
+ * GPIO Interrupt Type Register (table 13-3)
+ */
+
+#define K_GPIO_INTR_DISABLE 0
+#define K_GPIO_INTR_EDGE 1
+#define K_GPIO_INTR_LEVEL 2
+#define K_GPIO_INTR_SPLIT 3
+
+#define S_GPIO_INTR_TYPEX(n) (((n)/2)*2)
+#define M_GPIO_INTR_TYPEX(n) _SB_MAKEMASK(2, S_GPIO_INTR_TYPEX(n))
+#define V_GPIO_INTR_TYPEX(n, x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPEX(n))
+#define G_GPIO_INTR_TYPEX(n, x) _SB_GETVALUE(x, S_GPIO_INTR_TYPEX(n), M_GPIO_INTR_TYPEX(n))
+
+#define S_GPIO_INTR_TYPE0 0
+#define M_GPIO_INTR_TYPE0 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE0)
+#define V_GPIO_INTR_TYPE0(x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPE0)
+#define G_GPIO_INTR_TYPE0(x) _SB_GETVALUE(x, S_GPIO_INTR_TYPE0, M_GPIO_INTR_TYPE0)
+
+#define S_GPIO_INTR_TYPE2 2
+#define M_GPIO_INTR_TYPE2 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE2)
+#define V_GPIO_INTR_TYPE2(x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPE2)
+#define G_GPIO_INTR_TYPE2(x) _SB_GETVALUE(x, S_GPIO_INTR_TYPE2, M_GPIO_INTR_TYPE2)
+
+#define S_GPIO_INTR_TYPE4 4
+#define M_GPIO_INTR_TYPE4 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE4)
+#define V_GPIO_INTR_TYPE4(x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPE4)
+#define G_GPIO_INTR_TYPE4(x) _SB_GETVALUE(x, S_GPIO_INTR_TYPE4, M_GPIO_INTR_TYPE4)
+
+#define S_GPIO_INTR_TYPE6 6
+#define M_GPIO_INTR_TYPE6 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE6)
+#define V_GPIO_INTR_TYPE6(x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPE6)
+#define G_GPIO_INTR_TYPE6(x) _SB_GETVALUE(x, S_GPIO_INTR_TYPE6, M_GPIO_INTR_TYPE6)
+
+#define S_GPIO_INTR_TYPE8 8
+#define M_GPIO_INTR_TYPE8 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE8)
+#define V_GPIO_INTR_TYPE8(x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPE8)
+#define G_GPIO_INTR_TYPE8(x) _SB_GETVALUE(x, S_GPIO_INTR_TYPE8, M_GPIO_INTR_TYPE8)
+
+#define S_GPIO_INTR_TYPE10 10
+#define M_GPIO_INTR_TYPE10 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE10)
+#define V_GPIO_INTR_TYPE10(x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPE10)
+#define G_GPIO_INTR_TYPE10(x) _SB_GETVALUE(x, S_GPIO_INTR_TYPE10, M_GPIO_INTR_TYPE10)
+
+#define S_GPIO_INTR_TYPE12 12
+#define M_GPIO_INTR_TYPE12 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE12)
+#define V_GPIO_INTR_TYPE12(x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPE12)
+#define G_GPIO_INTR_TYPE12(x) _SB_GETVALUE(x, S_GPIO_INTR_TYPE12, M_GPIO_INTR_TYPE12)
+
+#define S_GPIO_INTR_TYPE14 14
+#define M_GPIO_INTR_TYPE14 _SB_MAKEMASK(2, S_GPIO_INTR_TYPE14)
+#define V_GPIO_INTR_TYPE14(x) _SB_MAKEVALUE(x, S_GPIO_INTR_TYPE14)
+#define G_GPIO_INTR_TYPE14(x) _SB_GETVALUE(x, S_GPIO_INTR_TYPE14, M_GPIO_INTR_TYPE14)
+
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+
+/*
+ * GPIO Interrupt Additional Type Register
+ */
+
+#define K_GPIO_INTR_BOTHEDGE 0
+#define K_GPIO_INTR_RISEEDGE 1
+#define K_GPIO_INTR_UNPRED1 2
+#define K_GPIO_INTR_UNPRED2 3
+
+#define S_GPIO_INTR_ATYPEX(n) (((n)/2)*2)
+#define M_GPIO_INTR_ATYPEX(n) _SB_MAKEMASK(2, S_GPIO_INTR_ATYPEX(n))
+#define V_GPIO_INTR_ATYPEX(n, x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPEX(n))
+#define G_GPIO_INTR_ATYPEX(n, x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPEX(n), M_GPIO_INTR_ATYPEX(n))
+
+#define S_GPIO_INTR_ATYPE0 0
+#define M_GPIO_INTR_ATYPE0 _SB_MAKEMASK(2, S_GPIO_INTR_ATYPE0)
+#define V_GPIO_INTR_ATYPE0(x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE0)
+#define G_GPIO_INTR_ATYPE0(x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPE0, M_GPIO_INTR_ATYPE0)
+
+#define S_GPIO_INTR_ATYPE2 2
+#define M_GPIO_INTR_ATYPE2 _SB_MAKEMASK(2, S_GPIO_INTR_ATYPE2)
+#define V_GPIO_INTR_ATYPE2(x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE2)
+#define G_GPIO_INTR_ATYPE2(x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPE2, M_GPIO_INTR_ATYPE2)
+
+#define S_GPIO_INTR_ATYPE4 4
+#define M_GPIO_INTR_ATYPE4 _SB_MAKEMASK(2, S_GPIO_INTR_ATYPE4)
+#define V_GPIO_INTR_ATYPE4(x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE4)
+#define G_GPIO_INTR_ATYPE4(x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPE4, M_GPIO_INTR_ATYPE4)
+
+#define S_GPIO_INTR_ATYPE6 6
+#define M_GPIO_INTR_ATYPE6 _SB_MAKEMASK(2, S_GPIO_INTR_ATYPE6)
+#define V_GPIO_INTR_ATYPE6(x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE6)
+#define G_GPIO_INTR_ATYPE6(x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPE6, M_GPIO_INTR_ATYPE6)
+
+#define S_GPIO_INTR_ATYPE8 8
+#define M_GPIO_INTR_ATYPE8 _SB_MAKEMASK(2, S_GPIO_INTR_ATYPE8)
+#define V_GPIO_INTR_ATYPE8(x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE8)
+#define G_GPIO_INTR_ATYPE8(x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPE8, M_GPIO_INTR_ATYPE8)
+
+#define S_GPIO_INTR_ATYPE10 10
+#define M_GPIO_INTR_ATYPE10 _SB_MAKEMASK(2, S_GPIO_INTR_ATYPE10)
+#define V_GPIO_INTR_ATYPE10(x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE10)
+#define G_GPIO_INTR_ATYPE10(x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPE10, M_GPIO_INTR_ATYPE10)
+
+#define S_GPIO_INTR_ATYPE12 12
+#define M_GPIO_INTR_ATYPE12 _SB_MAKEMASK(2, S_GPIO_INTR_ATYPE12)
+#define V_GPIO_INTR_ATYPE12(x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE12)
+#define G_GPIO_INTR_ATYPE12(x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPE12, M_GPIO_INTR_ATYPE12)
+
+#define S_GPIO_INTR_ATYPE14 14
+#define M_GPIO_INTR_ATYPE14 _SB_MAKEMASK(2, S_GPIO_INTR_ATYPE14)
+#define V_GPIO_INTR_ATYPE14(x) _SB_MAKEVALUE(x, S_GPIO_INTR_ATYPE14)
+#define G_GPIO_INTR_ATYPE14(x) _SB_GETVALUE(x, S_GPIO_INTR_ATYPE14, M_GPIO_INTR_ATYPE14)
+#endif
+
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_int.h b/arch/mips/include/asm/sibyte/sb1250_int.h
new file mode 100644
index 00000000000..f2850b4bcfd
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_int.h
@@ -0,0 +1,248 @@
+/* *********************************************************************
+ * SB1250 Board Support Package
+ *
+ * Interrupt Mapper definitions File: sb1250_int.h
+ *
+ * This module contains constants for manipulating the SB1250's
+ * interrupt mapper and definitions for the interrupt sources.
+ *
+ * SB1250 specification level: User's manual 1/02/02
+ *
+ *********************************************************************
+ *
+ * Copyright 2000, 2001, 2002, 2003
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+
+#ifndef _SB1250_INT_H
+#define _SB1250_INT_H
+
+#include "sb1250_defs.h"
+
+/* *********************************************************************
+ * Interrupt Mapper Constants
+ ********************************************************************* */
+
+/*
+ * Interrupt sources (Table 4-8, UM 0.2)
+ *
+ * First, the interrupt numbers.
+ */
+
+#define K_INT_SOURCES 64
+
+#define K_INT_WATCHDOG_TIMER_0 0
+#define K_INT_WATCHDOG_TIMER_1 1
+#define K_INT_TIMER_0 2
+#define K_INT_TIMER_1 3
+#define K_INT_TIMER_2 4
+#define K_INT_TIMER_3 5
+#define K_INT_SMB_0 6
+#define K_INT_SMB_1 7
+#define K_INT_UART_0 8
+#define K_INT_UART_1 9
+#define K_INT_SER_0 10
+#define K_INT_SER_1 11
+#define K_INT_PCMCIA 12
+#define K_INT_ADDR_TRAP 13
+#define K_INT_PERF_CNT 14
+#define K_INT_TRACE_FREEZE 15
+#define K_INT_BAD_ECC 16
+#define K_INT_COR_ECC 17
+#define K_INT_IO_BUS 18
+#define K_INT_MAC_0 19
+#define K_INT_MAC_1 20
+#define K_INT_MAC_2 21
+#define K_INT_DM_CH_0 22
+#define K_INT_DM_CH_1 23
+#define K_INT_DM_CH_2 24
+#define K_INT_DM_CH_3 25
+#define K_INT_MBOX_0 26
+#define K_INT_MBOX_1 27
+#define K_INT_MBOX_2 28
+#define K_INT_MBOX_3 29
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define K_INT_CYCLE_CP0_INT 30
+#define K_INT_CYCLE_CP1_INT 31
+#endif /* 1250 PASS2 || 112x PASS1 */
+#define K_INT_GPIO_0 32
+#define K_INT_GPIO_1 33
+#define K_INT_GPIO_2 34
+#define K_INT_GPIO_3 35
+#define K_INT_GPIO_4 36
+#define K_INT_GPIO_5 37
+#define K_INT_GPIO_6 38
+#define K_INT_GPIO_7 39
+#define K_INT_GPIO_8 40
+#define K_INT_GPIO_9 41
+#define K_INT_GPIO_10 42
+#define K_INT_GPIO_11 43
+#define K_INT_GPIO_12 44
+#define K_INT_GPIO_13 45
+#define K_INT_GPIO_14 46
+#define K_INT_GPIO_15 47
+#define K_INT_LDT_FATAL 48
+#define K_INT_LDT_NONFATAL 49
+#define K_INT_LDT_SMI 50
+#define K_INT_LDT_NMI 51
+#define K_INT_LDT_INIT 52
+#define K_INT_LDT_STARTUP 53
+#define K_INT_LDT_EXT 54
+#define K_INT_PCI_ERROR 55
+#define K_INT_PCI_INTA 56
+#define K_INT_PCI_INTB 57
+#define K_INT_PCI_INTC 58
+#define K_INT_PCI_INTD 59
+#define K_INT_SPARE_2 60
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define K_INT_MAC_0_CH1 61
+#define K_INT_MAC_1_CH1 62
+#define K_INT_MAC_2_CH1 63
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+/*
+ * Mask values for each interrupt
+ */
+
+#define M_INT_WATCHDOG_TIMER_0 _SB_MAKEMASK1(K_INT_WATCHDOG_TIMER_0)
+#define M_INT_WATCHDOG_TIMER_1 _SB_MAKEMASK1(K_INT_WATCHDOG_TIMER_1)
+#define M_INT_TIMER_0 _SB_MAKEMASK1(K_INT_TIMER_0)
+#define M_INT_TIMER_1 _SB_MAKEMASK1(K_INT_TIMER_1)
+#define M_INT_TIMER_2 _SB_MAKEMASK1(K_INT_TIMER_2)
+#define M_INT_TIMER_3 _SB_MAKEMASK1(K_INT_TIMER_3)
+#define M_INT_SMB_0 _SB_MAKEMASK1(K_INT_SMB_0)
+#define M_INT_SMB_1 _SB_MAKEMASK1(K_INT_SMB_1)
+#define M_INT_UART_0 _SB_MAKEMASK1(K_INT_UART_0)
+#define M_INT_UART_1 _SB_MAKEMASK1(K_INT_UART_1)
+#define M_INT_SER_0 _SB_MAKEMASK1(K_INT_SER_0)
+#define M_INT_SER_1 _SB_MAKEMASK1(K_INT_SER_1)
+#define M_INT_PCMCIA _SB_MAKEMASK1(K_INT_PCMCIA)
+#define M_INT_ADDR_TRAP _SB_MAKEMASK1(K_INT_ADDR_TRAP)
+#define M_INT_PERF_CNT _SB_MAKEMASK1(K_INT_PERF_CNT)
+#define M_INT_TRACE_FREEZE _SB_MAKEMASK1(K_INT_TRACE_FREEZE)
+#define M_INT_BAD_ECC _SB_MAKEMASK1(K_INT_BAD_ECC)
+#define M_INT_COR_ECC _SB_MAKEMASK1(K_INT_COR_ECC)
+#define M_INT_IO_BUS _SB_MAKEMASK1(K_INT_IO_BUS)
+#define M_INT_MAC_0 _SB_MAKEMASK1(K_INT_MAC_0)
+#define M_INT_MAC_1 _SB_MAKEMASK1(K_INT_MAC_1)
+#define M_INT_MAC_2 _SB_MAKEMASK1(K_INT_MAC_2)
+#define M_INT_DM_CH_0 _SB_MAKEMASK1(K_INT_DM_CH_0)
+#define M_INT_DM_CH_1 _SB_MAKEMASK1(K_INT_DM_CH_1)
+#define M_INT_DM_CH_2 _SB_MAKEMASK1(K_INT_DM_CH_2)
+#define M_INT_DM_CH_3 _SB_MAKEMASK1(K_INT_DM_CH_3)
+#define M_INT_MBOX_0 _SB_MAKEMASK1(K_INT_MBOX_0)
+#define M_INT_MBOX_1 _SB_MAKEMASK1(K_INT_MBOX_1)
+#define M_INT_MBOX_2 _SB_MAKEMASK1(K_INT_MBOX_2)
+#define M_INT_MBOX_3 _SB_MAKEMASK1(K_INT_MBOX_3)
+#define M_INT_MBOX_ALL _SB_MAKEMASK(4, K_INT_MBOX_0)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_INT_CYCLE_CP0_INT _SB_MAKEMASK1(K_INT_CYCLE_CP0_INT)
+#define M_INT_CYCLE_CP1_INT _SB_MAKEMASK1(K_INT_CYCLE_CP1_INT)
+#endif /* 1250 PASS2 || 112x PASS1 */
+#define M_INT_GPIO_0 _SB_MAKEMASK1(K_INT_GPIO_0)
+#define M_INT_GPIO_1 _SB_MAKEMASK1(K_INT_GPIO_1)
+#define M_INT_GPIO_2 _SB_MAKEMASK1(K_INT_GPIO_2)
+#define M_INT_GPIO_3 _SB_MAKEMASK1(K_INT_GPIO_3)
+#define M_INT_GPIO_4 _SB_MAKEMASK1(K_INT_GPIO_4)
+#define M_INT_GPIO_5 _SB_MAKEMASK1(K_INT_GPIO_5)
+#define M_INT_GPIO_6 _SB_MAKEMASK1(K_INT_GPIO_6)
+#define M_INT_GPIO_7 _SB_MAKEMASK1(K_INT_GPIO_7)
+#define M_INT_GPIO_8 _SB_MAKEMASK1(K_INT_GPIO_8)
+#define M_INT_GPIO_9 _SB_MAKEMASK1(K_INT_GPIO_9)
+#define M_INT_GPIO_10 _SB_MAKEMASK1(K_INT_GPIO_10)
+#define M_INT_GPIO_11 _SB_MAKEMASK1(K_INT_GPIO_11)
+#define M_INT_GPIO_12 _SB_MAKEMASK1(K_INT_GPIO_12)
+#define M_INT_GPIO_13 _SB_MAKEMASK1(K_INT_GPIO_13)
+#define M_INT_GPIO_14 _SB_MAKEMASK1(K_INT_GPIO_14)
+#define M_INT_GPIO_15 _SB_MAKEMASK1(K_INT_GPIO_15)
+#define M_INT_LDT_FATAL _SB_MAKEMASK1(K_INT_LDT_FATAL)
+#define M_INT_LDT_NONFATAL _SB_MAKEMASK1(K_INT_LDT_NONFATAL)
+#define M_INT_LDT_SMI _SB_MAKEMASK1(K_INT_LDT_SMI)
+#define M_INT_LDT_NMI _SB_MAKEMASK1(K_INT_LDT_NMI)
+#define M_INT_LDT_INIT _SB_MAKEMASK1(K_INT_LDT_INIT)
+#define M_INT_LDT_STARTUP _SB_MAKEMASK1(K_INT_LDT_STARTUP)
+#define M_INT_LDT_EXT _SB_MAKEMASK1(K_INT_LDT_EXT)
+#define M_INT_PCI_ERROR _SB_MAKEMASK1(K_INT_PCI_ERROR)
+#define M_INT_PCI_INTA _SB_MAKEMASK1(K_INT_PCI_INTA)
+#define M_INT_PCI_INTB _SB_MAKEMASK1(K_INT_PCI_INTB)
+#define M_INT_PCI_INTC _SB_MAKEMASK1(K_INT_PCI_INTC)
+#define M_INT_PCI_INTD _SB_MAKEMASK1(K_INT_PCI_INTD)
+#define M_INT_SPARE_2 _SB_MAKEMASK1(K_INT_SPARE_2)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_INT_MAC_0_CH1 _SB_MAKEMASK1(K_INT_MAC_0_CH1)
+#define M_INT_MAC_1_CH1 _SB_MAKEMASK1(K_INT_MAC_1_CH1)
+#define M_INT_MAC_2_CH1 _SB_MAKEMASK1(K_INT_MAC_2_CH1)
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+/*
+ * Interrupt mappings
+ */
+
+#define K_INT_MAP_I0 0 /* interrupt pins on processor */
+#define K_INT_MAP_I1 1
+#define K_INT_MAP_I2 2
+#define K_INT_MAP_I3 3
+#define K_INT_MAP_I4 4
+#define K_INT_MAP_I5 5
+#define K_INT_MAP_NMI 6 /* nonmaskable */
+#define K_INT_MAP_DINT 7 /* debug interrupt */
+
+/*
+ * LDT Interrupt Set Register (table 4-5)
+ */
+
+#define S_INT_LDT_INTMSG 0
+#define M_INT_LDT_INTMSG _SB_MAKEMASK(3, S_INT_LDT_INTMSG)
+#define V_INT_LDT_INTMSG(x) _SB_MAKEVALUE(x, S_INT_LDT_INTMSG)
+#define G_INT_LDT_INTMSG(x) _SB_GETVALUE(x, S_INT_LDT_INTMSG, M_INT_LDT_INTMSG)
+
+#define K_INT_LDT_INTMSG_FIXED 0
+#define K_INT_LDT_INTMSG_ARBITRATED 1
+#define K_INT_LDT_INTMSG_SMI 2
+#define K_INT_LDT_INTMSG_NMI 3
+#define K_INT_LDT_INTMSG_INIT 4
+#define K_INT_LDT_INTMSG_STARTUP 5
+#define K_INT_LDT_INTMSG_EXTINT 6
+#define K_INT_LDT_INTMSG_RESERVED 7
+
+#define M_INT_LDT_EDGETRIGGER 0
+#define M_INT_LDT_LEVELTRIGGER _SB_MAKEMASK1(3)
+
+#define M_INT_LDT_PHYSICALDEST 0
+#define M_INT_LDT_LOGICALDEST _SB_MAKEMASK1(4)
+
+#define S_INT_LDT_INTDEST 5
+#define M_INT_LDT_INTDEST _SB_MAKEMASK(10, S_INT_LDT_INTDEST)
+#define V_INT_LDT_INTDEST(x) _SB_MAKEVALUE(x, S_INT_LDT_INTDEST)
+#define G_INT_LDT_INTDEST(x) _SB_GETVALUE(x, S_INT_LDT_INTDEST, M_INT_LDT_INTDEST)
+
+#define S_INT_LDT_VECTOR 13
+#define M_INT_LDT_VECTOR _SB_MAKEMASK(8, S_INT_LDT_VECTOR)
+#define V_INT_LDT_VECTOR(x) _SB_MAKEVALUE(x, S_INT_LDT_VECTOR)
+#define G_INT_LDT_VECTOR(x) _SB_GETVALUE(x, S_INT_LDT_VECTOR, M_INT_LDT_VECTOR)
+
+/*
+ * Vector format (Table 4-6)
+ */
+
+#define M_LDTVECT_RAISEINT 0x00
+#define M_LDTVECT_RAISEMBOX 0x40
+
+
+#endif /* 1250/112x */
diff --git a/arch/mips/include/asm/sibyte/sb1250_l2c.h b/arch/mips/include/asm/sibyte/sb1250_l2c.h
new file mode 100644
index 00000000000..6554dcf05cf
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_l2c.h
@@ -0,0 +1,131 @@
+/* *********************************************************************
+ * SB1250 Board Support Package
+ *
+ * L2 Cache constants and macros File: sb1250_l2c.h
+ *
+ * This module contains constants useful for manipulating the
+ * level 2 cache.
+ *
+ * SB1250 specification level: User's manual 1/02/02
+ *
+ *********************************************************************
+ *
+ * Copyright 2000,2001,2002,2003
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+
+#ifndef _SB1250_L2C_H
+#define _SB1250_L2C_H
+
+#include "sb1250_defs.h"
+
+/*
+ * Level 2 Cache Tag register (Table 5-3)
+ */
+
+#define S_L2C_TAG_MBZ 0
+#define M_L2C_TAG_MBZ _SB_MAKEMASK(5, S_L2C_TAG_MBZ)
+
+#define S_L2C_TAG_INDEX 5
+#define M_L2C_TAG_INDEX _SB_MAKEMASK(12, S_L2C_TAG_INDEX)
+#define V_L2C_TAG_INDEX(x) _SB_MAKEVALUE(x, S_L2C_TAG_INDEX)
+#define G_L2C_TAG_INDEX(x) _SB_GETVALUE(x, S_L2C_TAG_INDEX, M_L2C_TAG_INDEX)
+
+#define S_L2C_TAG_TAG 17
+#define M_L2C_TAG_TAG _SB_MAKEMASK(23, S_L2C_TAG_TAG)
+#define V_L2C_TAG_TAG(x) _SB_MAKEVALUE(x, S_L2C_TAG_TAG)
+#define G_L2C_TAG_TAG(x) _SB_GETVALUE(x, S_L2C_TAG_TAG, M_L2C_TAG_TAG)
+
+#define S_L2C_TAG_ECC 40
+#define M_L2C_TAG_ECC _SB_MAKEMASK(6, S_L2C_TAG_ECC)
+#define V_L2C_TAG_ECC(x) _SB_MAKEVALUE(x, S_L2C_TAG_ECC)
+#define G_L2C_TAG_ECC(x) _SB_GETVALUE(x, S_L2C_TAG_ECC, M_L2C_TAG_ECC)
+
+#define S_L2C_TAG_WAY 46
+#define M_L2C_TAG_WAY _SB_MAKEMASK(2, S_L2C_TAG_WAY)
+#define V_L2C_TAG_WAY(x) _SB_MAKEVALUE(x, S_L2C_TAG_WAY)
+#define G_L2C_TAG_WAY(x) _SB_GETVALUE(x, S_L2C_TAG_WAY, M_L2C_TAG_WAY)
+
+#define M_L2C_TAG_DIRTY _SB_MAKEMASK1(48)
+#define M_L2C_TAG_VALID _SB_MAKEMASK1(49)
+
+/*
+ * Format of level 2 cache management address (table 5-2)
+ */
+
+#define S_L2C_MGMT_INDEX 5
+#define M_L2C_MGMT_INDEX _SB_MAKEMASK(12, S_L2C_MGMT_INDEX)
+#define V_L2C_MGMT_INDEX(x) _SB_MAKEVALUE(x, S_L2C_MGMT_INDEX)
+#define G_L2C_MGMT_INDEX(x) _SB_GETVALUE(x, S_L2C_MGMT_INDEX, M_L2C_MGMT_INDEX)
+
+#define S_L2C_MGMT_QUADRANT 15
+#define M_L2C_MGMT_QUADRANT _SB_MAKEMASK(2, S_L2C_MGMT_QUADRANT)
+#define V_L2C_MGMT_QUADRANT(x) _SB_MAKEVALUE(x, S_L2C_MGMT_QUADRANT)
+#define G_L2C_MGMT_QUADRANT(x) _SB_GETVALUE(x, S_L2C_MGMT_QUADRANT, M_L2C_MGMT_QUADRANT)
+
+#define S_L2C_MGMT_HALF 16
+#define M_L2C_MGMT_HALF _SB_MAKEMASK(1, S_L2C_MGMT_HALF)
+
+#define S_L2C_MGMT_WAY 17
+#define M_L2C_MGMT_WAY _SB_MAKEMASK(2, S_L2C_MGMT_WAY)
+#define V_L2C_MGMT_WAY(x) _SB_MAKEVALUE(x, S_L2C_MGMT_WAY)
+#define G_L2C_MGMT_WAY(x) _SB_GETVALUE(x, S_L2C_MGMT_WAY, M_L2C_MGMT_WAY)
+
+#define S_L2C_MGMT_ECC_DIAG 21
+#define M_L2C_MGMT_ECC_DIAG _SB_MAKEMASK(2, S_L2C_MGMT_ECC_DIAG)
+#define V_L2C_MGMT_ECC_DIAG(x) _SB_MAKEVALUE(x, S_L2C_MGMT_ECC_DIAG)
+#define G_L2C_MGMT_ECC_DIAG(x) _SB_GETVALUE(x, S_L2C_MGMT_ECC_DIAG, M_L2C_MGMT_ECC_DIAG)
+
+#define S_L2C_MGMT_TAG 23
+#define M_L2C_MGMT_TAG _SB_MAKEMASK(4, S_L2C_MGMT_TAG)
+#define V_L2C_MGMT_TAG(x) _SB_MAKEVALUE(x, S_L2C_MGMT_TAG)
+#define G_L2C_MGMT_TAG(x) _SB_GETVALUE(x, S_L2C_MGMT_TAG, M_L2C_MGMT_TAG)
+
+#define M_L2C_MGMT_DIRTY _SB_MAKEMASK1(19)
+#define M_L2C_MGMT_VALID _SB_MAKEMASK1(20)
+
+#define A_L2C_MGMT_TAG_BASE 0x00D0000000
+
+#define L2C_ENTRIES_PER_WAY 4096
+#define L2C_NUM_WAYS 4
+
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+/*
+ * L2 Read Misc. register (A_L2_READ_MISC)
+ */
+#define S_L2C_MISC_NO_WAY 10
+#define M_L2C_MISC_NO_WAY _SB_MAKEMASK(4, S_L2C_MISC_NO_WAY)
+#define V_L2C_MISC_NO_WAY(x) _SB_MAKEVALUE(x, S_L2C_MISC_NO_WAY)
+#define G_L2C_MISC_NO_WAY(x) _SB_GETVALUE(x, S_L2C_MISC_NO_WAY, M_L2C_MISC_NO_WAY)
+
+#define M_L2C_MISC_ECC_CLEANUP_DIS _SB_MAKEMASK1(9)
+#define M_L2C_MISC_MC_PRIO_LOW _SB_MAKEMASK1(8)
+#define M_L2C_MISC_SOFT_DISABLE_T _SB_MAKEMASK1(7)
+#define M_L2C_MISC_SOFT_DISABLE_B _SB_MAKEMASK1(6)
+#define M_L2C_MISC_SOFT_DISABLE_R _SB_MAKEMASK1(5)
+#define M_L2C_MISC_SOFT_DISABLE_L _SB_MAKEMASK1(4)
+#define M_L2C_MISC_SCACHE_DISABLE_T _SB_MAKEMASK1(3)
+#define M_L2C_MISC_SCACHE_DISABLE_B _SB_MAKEMASK1(2)
+#define M_L2C_MISC_SCACHE_DISABLE_R _SB_MAKEMASK1(1)
+#define M_L2C_MISC_SCACHE_DISABLE_L _SB_MAKEMASK1(0)
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_ldt.h b/arch/mips/include/asm/sibyte/sb1250_ldt.h
new file mode 100644
index 00000000000..081e8b1c4ad
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_ldt.h
@@ -0,0 +1,423 @@
+/* *********************************************************************
+ * SB1250 Board Support Package
+ *
+ * LDT constants File: sb1250_ldt.h
+ *
+ * This module contains constants and macros to describe
+ * the LDT interface on the SB1250.
+ *
+ * SB1250 specification level: User's manual 1/02/02
+ *
+ *********************************************************************
+ *
+ * Copyright 2000, 2001, 2002, 2003
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+
+#ifndef _SB1250_LDT_H
+#define _SB1250_LDT_H
+
+#include "sb1250_defs.h"
+
+#define K_LDT_VENDOR_SIBYTE 0x166D
+#define K_LDT_DEVICE_SB1250 0x0002
+
+/*
+ * LDT Interface Type 1 (bridge) configuration header
+ */
+
+#define R_LDT_TYPE1_DEVICEID 0x0000
+#define R_LDT_TYPE1_CMDSTATUS 0x0004
+#define R_LDT_TYPE1_CLASSREV 0x0008
+#define R_LDT_TYPE1_DEVHDR 0x000C
+#define R_LDT_TYPE1_BAR0 0x0010 /* not used */
+#define R_LDT_TYPE1_BAR1 0x0014 /* not used */
+
+#define R_LDT_TYPE1_BUSID 0x0018 /* bus ID register */
+#define R_LDT_TYPE1_SECSTATUS 0x001C /* secondary status / I/O base/limit */
+#define R_LDT_TYPE1_MEMLIMIT 0x0020
+#define R_LDT_TYPE1_PREFETCH 0x0024
+#define R_LDT_TYPE1_PREF_BASE 0x0028
+#define R_LDT_TYPE1_PREF_LIMIT 0x002C
+#define R_LDT_TYPE1_IOLIMIT 0x0030
+#define R_LDT_TYPE1_CAPPTR 0x0034
+#define R_LDT_TYPE1_ROMADDR 0x0038
+#define R_LDT_TYPE1_BRCTL 0x003C
+#define R_LDT_TYPE1_CMD 0x0040
+#define R_LDT_TYPE1_LINKCTRL 0x0044
+#define R_LDT_TYPE1_LINKFREQ 0x0048
+#define R_LDT_TYPE1_RESERVED1 0x004C
+#define R_LDT_TYPE1_SRICMD 0x0050
+#define R_LDT_TYPE1_SRITXNUM 0x0054
+#define R_LDT_TYPE1_SRIRXNUM 0x0058
+#define R_LDT_TYPE1_ERRSTATUS 0x0068
+#define R_LDT_TYPE1_SRICTRL 0x006C
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define R_LDT_TYPE1_ADDSTATUS 0x0070
+#endif /* 1250 PASS2 || 112x PASS1 */
+#define R_LDT_TYPE1_TXBUFCNT 0x00C8
+#define R_LDT_TYPE1_EXPCRC 0x00DC
+#define R_LDT_TYPE1_RXCRC 0x00F0
+
+
+/*
+ * LDT Device ID register
+ */
+
+#define S_LDT_DEVICEID_VENDOR 0
+#define M_LDT_DEVICEID_VENDOR _SB_MAKEMASK_32(16, S_LDT_DEVICEID_VENDOR)
+#define V_LDT_DEVICEID_VENDOR(x) _SB_MAKEVALUE_32(x, S_LDT_DEVICEID_VENDOR)
+#define G_LDT_DEVICEID_VENDOR(x) _SB_GETVALUE_32(x, S_LDT_DEVICEID_VENDOR, M_LDT_DEVICEID_VENDOR)
+
+#define S_LDT_DEVICEID_DEVICEID 16
+#define M_LDT_DEVICEID_DEVICEID _SB_MAKEMASK_32(16, S_LDT_DEVICEID_DEVICEID)
+#define V_LDT_DEVICEID_DEVICEID(x) _SB_MAKEVALUE_32(x, S_LDT_DEVICEID_DEVICEID)
+#define G_LDT_DEVICEID_DEVICEID(x) _SB_GETVALUE_32(x, S_LDT_DEVICEID_DEVICEID, M_LDT_DEVICEID_DEVICEID)
+
+
+/*
+ * LDT Command Register (Table 8-13)
+ */
+
+#define M_LDT_CMD_IOSPACE_EN _SB_MAKEMASK1_32(0)
+#define M_LDT_CMD_MEMSPACE_EN _SB_MAKEMASK1_32(1)
+#define M_LDT_CMD_MASTER_EN _SB_MAKEMASK1_32(2)
+#define M_LDT_CMD_SPECCYC_EN _SB_MAKEMASK1_32(3)
+#define M_LDT_CMD_MEMWRINV_EN _SB_MAKEMASK1_32(4)
+#define M_LDT_CMD_VGAPALSNP_EN _SB_MAKEMASK1_32(5)
+#define M_LDT_CMD_PARERRRESP _SB_MAKEMASK1_32(6)
+#define M_LDT_CMD_WAITCYCCTRL _SB_MAKEMASK1_32(7)
+#define M_LDT_CMD_SERR_EN _SB_MAKEMASK1_32(8)
+#define M_LDT_CMD_FASTB2B_EN _SB_MAKEMASK1_32(9)
+
+/*
+ * LDT class and revision registers
+ */
+
+#define S_LDT_CLASSREV_REV 0
+#define M_LDT_CLASSREV_REV _SB_MAKEMASK_32(8, S_LDT_CLASSREV_REV)
+#define V_LDT_CLASSREV_REV(x) _SB_MAKEVALUE_32(x, S_LDT_CLASSREV_REV)
+#define G_LDT_CLASSREV_REV(x) _SB_GETVALUE_32(x, S_LDT_CLASSREV_REV, M_LDT_CLASSREV_REV)
+
+#define S_LDT_CLASSREV_CLASS 8
+#define M_LDT_CLASSREV_CLASS _SB_MAKEMASK_32(24, S_LDT_CLASSREV_CLASS)
+#define V_LDT_CLASSREV_CLASS(x) _SB_MAKEVALUE_32(x, S_LDT_CLASSREV_CLASS)
+#define G_LDT_CLASSREV_CLASS(x) _SB_GETVALUE_32(x, S_LDT_CLASSREV_CLASS, M_LDT_CLASSREV_CLASS)
+
+#define K_LDT_REV 0x01
+#define K_LDT_CLASS 0x060000
+
+/*
+ * Device Header (offset 0x0C)
+ */
+
+#define S_LDT_DEVHDR_CLINESZ 0
+#define M_LDT_DEVHDR_CLINESZ _SB_MAKEMASK_32(8, S_LDT_DEVHDR_CLINESZ)
+#define V_LDT_DEVHDR_CLINESZ(x) _SB_MAKEVALUE_32(x, S_LDT_DEVHDR_CLINESZ)
+#define G_LDT_DEVHDR_CLINESZ(x) _SB_GETVALUE_32(x, S_LDT_DEVHDR_CLINESZ, M_LDT_DEVHDR_CLINESZ)
+
+#define S_LDT_DEVHDR_LATTMR 8
+#define M_LDT_DEVHDR_LATTMR _SB_MAKEMASK_32(8, S_LDT_DEVHDR_LATTMR)
+#define V_LDT_DEVHDR_LATTMR(x) _SB_MAKEVALUE_32(x, S_LDT_DEVHDR_LATTMR)
+#define G_LDT_DEVHDR_LATTMR(x) _SB_GETVALUE_32(x, S_LDT_DEVHDR_LATTMR, M_LDT_DEVHDR_LATTMR)
+
+#define S_LDT_DEVHDR_HDRTYPE 16
+#define M_LDT_DEVHDR_HDRTYPE _SB_MAKEMASK_32(8, S_LDT_DEVHDR_HDRTYPE)
+#define V_LDT_DEVHDR_HDRTYPE(x) _SB_MAKEVALUE_32(x, S_LDT_DEVHDR_HDRTYPE)
+#define G_LDT_DEVHDR_HDRTYPE(x) _SB_GETVALUE_32(x, S_LDT_DEVHDR_HDRTYPE, M_LDT_DEVHDR_HDRTYPE)
+
+#define K_LDT_DEVHDR_HDRTYPE_TYPE1 1
+
+#define S_LDT_DEVHDR_BIST 24
+#define M_LDT_DEVHDR_BIST _SB_MAKEMASK_32(8, S_LDT_DEVHDR_BIST)
+#define V_LDT_DEVHDR_BIST(x) _SB_MAKEVALUE_32(x, S_LDT_DEVHDR_BIST)
+#define G_LDT_DEVHDR_BIST(x) _SB_GETVALUE_32(x, S_LDT_DEVHDR_BIST, M_LDT_DEVHDR_BIST)
+
+
+
+/*
+ * LDT Status Register (Table 8-14). Note that these constants
+ * assume you've read the command and status register
+ * together (32-bit read at offset 0x04)
+ *
+ * These bits also apply to the secondary status
+ * register (Table 8-15), offset 0x1C
+ */
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_LDT_STATUS_VGAEN _SB_MAKEMASK1_32(3)
+#endif /* 1250 PASS2 || 112x PASS1 */
+#define M_LDT_STATUS_CAPLIST _SB_MAKEMASK1_32(20)
+#define M_LDT_STATUS_66MHZCAP _SB_MAKEMASK1_32(21)
+#define M_LDT_STATUS_RESERVED2 _SB_MAKEMASK1_32(22)
+#define M_LDT_STATUS_FASTB2BCAP _SB_MAKEMASK1_32(23)
+#define M_LDT_STATUS_MSTRDPARERR _SB_MAKEMASK1_32(24)
+
+#define S_LDT_STATUS_DEVSELTIMING 25
+#define M_LDT_STATUS_DEVSELTIMING _SB_MAKEMASK_32(2, S_LDT_STATUS_DEVSELTIMING)
+#define V_LDT_STATUS_DEVSELTIMING(x) _SB_MAKEVALUE_32(x, S_LDT_STATUS_DEVSELTIMING)
+#define G_LDT_STATUS_DEVSELTIMING(x) _SB_GETVALUE_32(x, S_LDT_STATUS_DEVSELTIMING, M_LDT_STATUS_DEVSELTIMING)
+
+#define M_LDT_STATUS_SIGDTGTABORT _SB_MAKEMASK1_32(27)
+#define M_LDT_STATUS_RCVDTGTABORT _SB_MAKEMASK1_32(28)
+#define M_LDT_STATUS_RCVDMSTRABORT _SB_MAKEMASK1_32(29)
+#define M_LDT_STATUS_SIGDSERR _SB_MAKEMASK1_32(30)
+#define M_LDT_STATUS_DETPARERR _SB_MAKEMASK1_32(31)
+
+/*
+ * Bridge Control Register (Table 8-16). Note that these
+ * constants assume you've read the register as a 32-bit
+ * read (offset 0x3C)
+ */
+
+#define M_LDT_BRCTL_PARERRRESP_EN _SB_MAKEMASK1_32(16)
+#define M_LDT_BRCTL_SERR_EN _SB_MAKEMASK1_32(17)
+#define M_LDT_BRCTL_ISA_EN _SB_MAKEMASK1_32(18)
+#define M_LDT_BRCTL_VGA_EN _SB_MAKEMASK1_32(19)
+#define M_LDT_BRCTL_MSTRABORTMODE _SB_MAKEMASK1_32(21)
+#define M_LDT_BRCTL_SECBUSRESET _SB_MAKEMASK1_32(22)
+#define M_LDT_BRCTL_FASTB2B_EN _SB_MAKEMASK1_32(23)
+#define M_LDT_BRCTL_PRIDISCARD _SB_MAKEMASK1_32(24)
+#define M_LDT_BRCTL_SECDISCARD _SB_MAKEMASK1_32(25)
+#define M_LDT_BRCTL_DISCARDSTAT _SB_MAKEMASK1_32(26)
+#define M_LDT_BRCTL_DISCARDSERR_EN _SB_MAKEMASK1_32(27)
+
+/*
+ * LDT Command Register (Table 8-17). Note that these constants
+ * assume you've read the command and status register together
+ * 32-bit read at offset 0x40
+ */
+
+#define M_LDT_CMD_WARMRESET _SB_MAKEMASK1_32(16)
+#define M_LDT_CMD_DOUBLEENDED _SB_MAKEMASK1_32(17)
+
+#define S_LDT_CMD_CAPTYPE 29
+#define M_LDT_CMD_CAPTYPE _SB_MAKEMASK_32(3, S_LDT_CMD_CAPTYPE)
+#define V_LDT_CMD_CAPTYPE(x) _SB_MAKEVALUE_32(x, S_LDT_CMD_CAPTYPE)
+#define G_LDT_CMD_CAPTYPE(x) _SB_GETVALUE_32(x, S_LDT_CMD_CAPTYPE, M_LDT_CMD_CAPTYPE)
+
+/*
+ * LDT link control register (Table 8-18), and (Table 8-19)
+ */
+
+#define M_LDT_LINKCTRL_CAPSYNCFLOOD_EN _SB_MAKEMASK1_32(1)
+#define M_LDT_LINKCTRL_CRCSTARTTEST _SB_MAKEMASK1_32(2)
+#define M_LDT_LINKCTRL_CRCFORCEERR _SB_MAKEMASK1_32(3)
+#define M_LDT_LINKCTRL_LINKFAIL _SB_MAKEMASK1_32(4)
+#define M_LDT_LINKCTRL_INITDONE _SB_MAKEMASK1_32(5)
+#define M_LDT_LINKCTRL_EOC _SB_MAKEMASK1_32(6)
+#define M_LDT_LINKCTRL_XMITOFF _SB_MAKEMASK1_32(7)
+
+#define S_LDT_LINKCTRL_CRCERR 8
+#define M_LDT_LINKCTRL_CRCERR _SB_MAKEMASK_32(4, S_LDT_LINKCTRL_CRCERR)
+#define V_LDT_LINKCTRL_CRCERR(x) _SB_MAKEVALUE_32(x, S_LDT_LINKCTRL_CRCERR)
+#define G_LDT_LINKCTRL_CRCERR(x) _SB_GETVALUE_32(x, S_LDT_LINKCTRL_CRCERR, M_LDT_LINKCTRL_CRCERR)
+
+#define S_LDT_LINKCTRL_MAXIN 16
+#define M_LDT_LINKCTRL_MAXIN _SB_MAKEMASK_32(3, S_LDT_LINKCTRL_MAXIN)
+#define V_LDT_LINKCTRL_MAXIN(x) _SB_MAKEVALUE_32(x, S_LDT_LINKCTRL_MAXIN)
+#define G_LDT_LINKCTRL_MAXIN(x) _SB_GETVALUE_32(x, S_LDT_LINKCTRL_MAXIN, M_LDT_LINKCTRL_MAXIN)
+
+#define M_LDT_LINKCTRL_DWFCLN _SB_MAKEMASK1_32(19)
+
+#define S_LDT_LINKCTRL_MAXOUT 20
+#define M_LDT_LINKCTRL_MAXOUT _SB_MAKEMASK_32(3, S_LDT_LINKCTRL_MAXOUT)
+#define V_LDT_LINKCTRL_MAXOUT(x) _SB_MAKEVALUE_32(x, S_LDT_LINKCTRL_MAXOUT)
+#define G_LDT_LINKCTRL_MAXOUT(x) _SB_GETVALUE_32(x, S_LDT_LINKCTRL_MAXOUT, M_LDT_LINKCTRL_MAXOUT)
+
+#define M_LDT_LINKCTRL_DWFCOUT _SB_MAKEMASK1_32(23)
+
+#define S_LDT_LINKCTRL_WIDTHIN 24
+#define M_LDT_LINKCTRL_WIDTHIN _SB_MAKEMASK_32(3, S_LDT_LINKCTRL_WIDTHIN)
+#define V_LDT_LINKCTRL_WIDTHIN(x) _SB_MAKEVALUE_32(x, S_LDT_LINKCTRL_WIDTHIN)
+#define G_LDT_LINKCTRL_WIDTHIN(x) _SB_GETVALUE_32(x, S_LDT_LINKCTRL_WIDTHIN, M_LDT_LINKCTRL_WIDTHIN)
+
+#define M_LDT_LINKCTRL_DWFCLIN_EN _SB_MAKEMASK1_32(27)
+
+#define S_LDT_LINKCTRL_WIDTHOUT 28
+#define M_LDT_LINKCTRL_WIDTHOUT _SB_MAKEMASK_32(3, S_LDT_LINKCTRL_WIDTHOUT)
+#define V_LDT_LINKCTRL_WIDTHOUT(x) _SB_MAKEVALUE_32(x, S_LDT_LINKCTRL_WIDTHOUT)
+#define G_LDT_LINKCTRL_WIDTHOUT(x) _SB_GETVALUE_32(x, S_LDT_LINKCTRL_WIDTHOUT, M_LDT_LINKCTRL_WIDTHOUT)
+
+#define M_LDT_LINKCTRL_DWFCOUT_EN _SB_MAKEMASK1_32(31)
+
+/*
+ * LDT Link frequency register (Table 8-20) offset 0x48
+ */
+
+#define S_LDT_LINKFREQ_FREQ 8
+#define M_LDT_LINKFREQ_FREQ _SB_MAKEMASK_32(4, S_LDT_LINKFREQ_FREQ)
+#define V_LDT_LINKFREQ_FREQ(x) _SB_MAKEVALUE_32(x, S_LDT_LINKFREQ_FREQ)
+#define G_LDT_LINKFREQ_FREQ(x) _SB_GETVALUE_32(x, S_LDT_LINKFREQ_FREQ, M_LDT_LINKFREQ_FREQ)
+
+#define K_LDT_LINKFREQ_200MHZ 0
+#define K_LDT_LINKFREQ_300MHZ 1
+#define K_LDT_LINKFREQ_400MHZ 2
+#define K_LDT_LINKFREQ_500MHZ 3
+#define K_LDT_LINKFREQ_600MHZ 4
+#define K_LDT_LINKFREQ_800MHZ 5
+#define K_LDT_LINKFREQ_1000MHZ 6
+
+/*
+ * LDT SRI Command Register (Table 8-21). Note that these constants
+ * assume you've read the command and status register together
+ * 32-bit read at offset 0x50
+ */
+
+#define M_LDT_SRICMD_SIPREADY _SB_MAKEMASK1_32(16)
+#define M_LDT_SRICMD_SYNCPTRCTL _SB_MAKEMASK1_32(17)
+#define M_LDT_SRICMD_REDUCESYNCZERO _SB_MAKEMASK1_32(18)
+#if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1)
+#define M_LDT_SRICMD_DISSTARVATIONCNT _SB_MAKEMASK1_32(19) /* PASS1 */
+#endif /* up to 1250 PASS1 */
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_LDT_SRICMD_DISMULTTXVLD _SB_MAKEMASK1_32(19)
+#define M_LDT_SRICMD_EXPENDIAN _SB_MAKEMASK1_32(26)
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+
+#define S_LDT_SRICMD_RXMARGIN 20
+#define M_LDT_SRICMD_RXMARGIN _SB_MAKEMASK_32(5, S_LDT_SRICMD_RXMARGIN)
+#define V_LDT_SRICMD_RXMARGIN(x) _SB_MAKEVALUE_32(x, S_LDT_SRICMD_RXMARGIN)
+#define G_LDT_SRICMD_RXMARGIN(x) _SB_GETVALUE_32(x, S_LDT_SRICMD_RXMARGIN, M_LDT_SRICMD_RXMARGIN)
+
+#define M_LDT_SRICMD_LDTPLLCOMPAT _SB_MAKEMASK1_32(25)
+
+#define S_LDT_SRICMD_TXINITIALOFFSET 28
+#define M_LDT_SRICMD_TXINITIALOFFSET _SB_MAKEMASK_32(3, S_LDT_SRICMD_TXINITIALOFFSET)
+#define V_LDT_SRICMD_TXINITIALOFFSET(x) _SB_MAKEVALUE_32(x, S_LDT_SRICMD_TXINITIALOFFSET)
+#define G_LDT_SRICMD_TXINITIALOFFSET(x) _SB_GETVALUE_32(x, S_LDT_SRICMD_TXINITIALOFFSET, M_LDT_SRICMD_TXINITIALOFFSET)
+
+#define M_LDT_SRICMD_LINKFREQDIRECT _SB_MAKEMASK1_32(31)
+
+/*
+ * LDT Error control and status register (Table 8-22) (Table 8-23)
+ */
+
+#define M_LDT_ERRCTL_PROTFATAL_EN _SB_MAKEMASK1_32(0)
+#define M_LDT_ERRCTL_PROTNONFATAL_EN _SB_MAKEMASK1_32(1)
+#define M_LDT_ERRCTL_PROTSYNCFLOOD_EN _SB_MAKEMASK1_32(2)
+#define M_LDT_ERRCTL_OVFFATAL_EN _SB_MAKEMASK1_32(3)
+#define M_LDT_ERRCTL_OVFNONFATAL_EN _SB_MAKEMASK1_32(4)
+#define M_LDT_ERRCTL_OVFSYNCFLOOD_EN _SB_MAKEMASK1_32(5)
+#define M_LDT_ERRCTL_EOCNXAFATAL_EN _SB_MAKEMASK1_32(6)
+#define M_LDT_ERRCTL_EOCNXANONFATAL_EN _SB_MAKEMASK1_32(7)
+#define M_LDT_ERRCTL_EOCNXASYNCFLOOD_EN _SB_MAKEMASK1_32(8)
+#define M_LDT_ERRCTL_CRCFATAL_EN _SB_MAKEMASK1_32(9)
+#define M_LDT_ERRCTL_CRCNONFATAL_EN _SB_MAKEMASK1_32(10)
+#define M_LDT_ERRCTL_SERRFATAL_EN _SB_MAKEMASK1_32(11)
+#define M_LDT_ERRCTL_SRCTAGFATAL_EN _SB_MAKEMASK1_32(12)
+#define M_LDT_ERRCTL_SRCTAGNONFATAL_EN _SB_MAKEMASK1_32(13)
+#define M_LDT_ERRCTL_SRCTAGSYNCFLOOD_EN _SB_MAKEMASK1_32(14)
+#define M_LDT_ERRCTL_MAPNXAFATAL_EN _SB_MAKEMASK1_32(15)
+#define M_LDT_ERRCTL_MAPNXANONFATAL_EN _SB_MAKEMASK1_32(16)
+#define M_LDT_ERRCTL_MAPNXASYNCFLOOD_EN _SB_MAKEMASK1_32(17)
+
+#define M_LDT_ERRCTL_PROTOERR _SB_MAKEMASK1_32(24)
+#define M_LDT_ERRCTL_OVFERR _SB_MAKEMASK1_32(25)
+#define M_LDT_ERRCTL_EOCNXAERR _SB_MAKEMASK1_32(26)
+#define M_LDT_ERRCTL_SRCTAGERR _SB_MAKEMASK1_32(27)
+#define M_LDT_ERRCTL_MAPNXAERR _SB_MAKEMASK1_32(28)
+
+/*
+ * SRI Control register (Table 8-24, 8-25) Offset 0x6C
+ */
+
+#define S_LDT_SRICTRL_NEEDRESP 0
+#define M_LDT_SRICTRL_NEEDRESP _SB_MAKEMASK_32(2, S_LDT_SRICTRL_NEEDRESP)
+#define V_LDT_SRICTRL_NEEDRESP(x) _SB_MAKEVALUE_32(x, S_LDT_SRICTRL_NEEDRESP)
+#define G_LDT_SRICTRL_NEEDRESP(x) _SB_GETVALUE_32(x, S_LDT_SRICTRL_NEEDRESP, M_LDT_SRICTRL_NEEDRESP)
+
+#define S_LDT_SRICTRL_NEEDNPREQ 2
+#define M_LDT_SRICTRL_NEEDNPREQ _SB_MAKEMASK_32(2, S_LDT_SRICTRL_NEEDNPREQ)
+#define V_LDT_SRICTRL_NEEDNPREQ(x) _SB_MAKEVALUE_32(x, S_LDT_SRICTRL_NEEDNPREQ)
+#define G_LDT_SRICTRL_NEEDNPREQ(x) _SB_GETVALUE_32(x, S_LDT_SRICTRL_NEEDNPREQ, M_LDT_SRICTRL_NEEDNPREQ)
+
+#define S_LDT_SRICTRL_NEEDPREQ 4
+#define M_LDT_SRICTRL_NEEDPREQ _SB_MAKEMASK_32(2, S_LDT_SRICTRL_NEEDPREQ)
+#define V_LDT_SRICTRL_NEEDPREQ(x) _SB_MAKEVALUE_32(x, S_LDT_SRICTRL_NEEDPREQ)
+#define G_LDT_SRICTRL_NEEDPREQ(x) _SB_GETVALUE_32(x, S_LDT_SRICTRL_NEEDPREQ, M_LDT_SRICTRL_NEEDPREQ)
+
+#define S_LDT_SRICTRL_WANTRESP 8
+#define M_LDT_SRICTRL_WANTRESP _SB_MAKEMASK_32(2, S_LDT_SRICTRL_WANTRESP)
+#define V_LDT_SRICTRL_WANTRESP(x) _SB_MAKEVALUE_32(x, S_LDT_SRICTRL_WANTRESP)
+#define G_LDT_SRICTRL_WANTRESP(x) _SB_GETVALUE_32(x, S_LDT_SRICTRL_WANTRESP, M_LDT_SRICTRL_WANTRESP)
+
+#define S_LDT_SRICTRL_WANTNPREQ 10
+#define M_LDT_SRICTRL_WANTNPREQ _SB_MAKEMASK_32(2, S_LDT_SRICTRL_WANTNPREQ)
+#define V_LDT_SRICTRL_WANTNPREQ(x) _SB_MAKEVALUE_32(x, S_LDT_SRICTRL_WANTNPREQ)
+#define G_LDT_SRICTRL_WANTNPREQ(x) _SB_GETVALUE_32(x, S_LDT_SRICTRL_WANTNPREQ, M_LDT_SRICTRL_WANTNPREQ)
+
+#define S_LDT_SRICTRL_WANTPREQ 12
+#define M_LDT_SRICTRL_WANTPREQ _SB_MAKEMASK_32(2, S_LDT_SRICTRL_WANTPREQ)
+#define V_LDT_SRICTRL_WANTPREQ(x) _SB_MAKEVALUE_32(x, S_LDT_SRICTRL_WANTPREQ)
+#define G_LDT_SRICTRL_WANTPREQ(x) _SB_GETVALUE_32(x, S_LDT_SRICTRL_WANTPREQ, M_LDT_SRICTRL_WANTPREQ)
+
+#define S_LDT_SRICTRL_BUFRELSPACE 16
+#define M_LDT_SRICTRL_BUFRELSPACE _SB_MAKEMASK_32(4, S_LDT_SRICTRL_BUFRELSPACE)
+#define V_LDT_SRICTRL_BUFRELSPACE(x) _SB_MAKEVALUE_32(x, S_LDT_SRICTRL_BUFRELSPACE)
+#define G_LDT_SRICTRL_BUFRELSPACE(x) _SB_GETVALUE_32(x, S_LDT_SRICTRL_BUFRELSPACE, M_LDT_SRICTRL_BUFRELSPACE)
+
+/*
+ * LDT SRI Transmit Buffer Count register (Table 8-26)
+ */
+
+#define S_LDT_TXBUFCNT_PCMD 0
+#define M_LDT_TXBUFCNT_PCMD _SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_PCMD)
+#define V_LDT_TXBUFCNT_PCMD(x) _SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_PCMD)
+#define G_LDT_TXBUFCNT_PCMD(x) _SB_GETVALUE_32(x, S_LDT_TXBUFCNT_PCMD, M_LDT_TXBUFCNT_PCMD)
+
+#define S_LDT_TXBUFCNT_PDATA 4
+#define M_LDT_TXBUFCNT_PDATA _SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_PDATA)
+#define V_LDT_TXBUFCNT_PDATA(x) _SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_PDATA)
+#define G_LDT_TXBUFCNT_PDATA(x) _SB_GETVALUE_32(x, S_LDT_TXBUFCNT_PDATA, M_LDT_TXBUFCNT_PDATA)
+
+#define S_LDT_TXBUFCNT_NPCMD 8
+#define M_LDT_TXBUFCNT_NPCMD _SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_NPCMD)
+#define V_LDT_TXBUFCNT_NPCMD(x) _SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_NPCMD)
+#define G_LDT_TXBUFCNT_NPCMD(x) _SB_GETVALUE_32(x, S_LDT_TXBUFCNT_NPCMD, M_LDT_TXBUFCNT_NPCMD)
+
+#define S_LDT_TXBUFCNT_NPDATA 12
+#define M_LDT_TXBUFCNT_NPDATA _SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_NPDATA)
+#define V_LDT_TXBUFCNT_NPDATA(x) _SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_NPDATA)
+#define G_LDT_TXBUFCNT_NPDATA(x) _SB_GETVALUE_32(x, S_LDT_TXBUFCNT_NPDATA, M_LDT_TXBUFCNT_NPDATA)
+
+#define S_LDT_TXBUFCNT_RCMD 16
+#define M_LDT_TXBUFCNT_RCMD _SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_RCMD)
+#define V_LDT_TXBUFCNT_RCMD(x) _SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_RCMD)
+#define G_LDT_TXBUFCNT_RCMD(x) _SB_GETVALUE_32(x, S_LDT_TXBUFCNT_RCMD, M_LDT_TXBUFCNT_RCMD)
+
+#define S_LDT_TXBUFCNT_RDATA 20
+#define M_LDT_TXBUFCNT_RDATA _SB_MAKEMASK_32(4, S_LDT_TXBUFCNT_RDATA)
+#define V_LDT_TXBUFCNT_RDATA(x) _SB_MAKEVALUE_32(x, S_LDT_TXBUFCNT_RDATA)
+#define G_LDT_TXBUFCNT_RDATA(x) _SB_GETVALUE_32(x, S_LDT_TXBUFCNT_RDATA, M_LDT_TXBUFCNT_RDATA)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+/*
+ * Additional Status Register
+ */
+
+#define S_LDT_ADDSTATUS_TGTDONE 0
+#define M_LDT_ADDSTATUS_TGTDONE _SB_MAKEMASK_32(8, S_LDT_ADDSTATUS_TGTDONE)
+#define V_LDT_ADDSTATUS_TGTDONE(x) _SB_MAKEVALUE_32(x, S_LDT_ADDSTATUS_TGTDONE)
+#define G_LDT_ADDSTATUS_TGTDONE(x) _SB_GETVALUE_32(x, S_LDT_ADDSTATUS_TGTDONE, M_LDT_ADDSTATUS_TGTDONE)
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+#endif
+
diff --git a/arch/mips/include/asm/sibyte/sb1250_mac.h b/arch/mips/include/asm/sibyte/sb1250_mac.h
new file mode 100644
index 00000000000..b6faf08ca81
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_mac.h
@@ -0,0 +1,656 @@
+/* *********************************************************************
+ * SB1250 Board Support Package
+ *
+ * MAC constants and macros File: sb1250_mac.h
+ *
+ * This module contains constants and macros for the SB1250's
+ * ethernet controllers.
+ *
+ * SB1250 specification level: User's manual 1/02/02
+ *
+ *********************************************************************
+ *
+ * Copyright 2000,2001,2002,2003
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+
+#ifndef _SB1250_MAC_H
+#define _SB1250_MAC_H
+
+#include "sb1250_defs.h"
+
+/* *********************************************************************
+ * Ethernet MAC Registers
+ ********************************************************************* */
+
+/*
+ * MAC Configuration Register (Table 9-13)
+ * Register: MAC_CFG_0
+ * Register: MAC_CFG_1
+ * Register: MAC_CFG_2
+ */
+
+
+#define M_MAC_RESERVED0 _SB_MAKEMASK1(0)
+#define M_MAC_TX_HOLD_SOP_EN _SB_MAKEMASK1(1)
+#define M_MAC_RETRY_EN _SB_MAKEMASK1(2)
+#define M_MAC_RET_DRPREQ_EN _SB_MAKEMASK1(3)
+#define M_MAC_RET_UFL_EN _SB_MAKEMASK1(4)
+#define M_MAC_BURST_EN _SB_MAKEMASK1(5)
+
+#define S_MAC_TX_PAUSE _SB_MAKE64(6)
+#define M_MAC_TX_PAUSE_CNT _SB_MAKEMASK(3, S_MAC_TX_PAUSE)
+#define V_MAC_TX_PAUSE_CNT(x) _SB_MAKEVALUE(x, S_MAC_TX_PAUSE)
+
+#define K_MAC_TX_PAUSE_CNT_512 0
+#define K_MAC_TX_PAUSE_CNT_1K 1
+#define K_MAC_TX_PAUSE_CNT_2K 2
+#define K_MAC_TX_PAUSE_CNT_4K 3
+#define K_MAC_TX_PAUSE_CNT_8K 4
+#define K_MAC_TX_PAUSE_CNT_16K 5
+#define K_MAC_TX_PAUSE_CNT_32K 6
+#define K_MAC_TX_PAUSE_CNT_64K 7
+
+#define V_MAC_TX_PAUSE_CNT_512 V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_512)
+#define V_MAC_TX_PAUSE_CNT_1K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_1K)
+#define V_MAC_TX_PAUSE_CNT_2K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_2K)
+#define V_MAC_TX_PAUSE_CNT_4K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_4K)
+#define V_MAC_TX_PAUSE_CNT_8K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_8K)
+#define V_MAC_TX_PAUSE_CNT_16K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_16K)
+#define V_MAC_TX_PAUSE_CNT_32K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_32K)
+#define V_MAC_TX_PAUSE_CNT_64K V_MAC_TX_PAUSE_CNT(K_MAC_TX_PAUSE_CNT_64K)
+
+#define M_MAC_RESERVED1 _SB_MAKEMASK(8, 9)
+
+#define M_MAC_AP_STAT_EN _SB_MAKEMASK1(17)
+
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_TIMESTAMP _SB_MAKEMASK1(18)
+#endif
+#define M_MAC_DRP_ERRPKT_EN _SB_MAKEMASK1(19)
+#define M_MAC_DRP_FCSERRPKT_EN _SB_MAKEMASK1(20)
+#define M_MAC_DRP_CODEERRPKT_EN _SB_MAKEMASK1(21)
+#define M_MAC_DRP_DRBLERRPKT_EN _SB_MAKEMASK1(22)
+#define M_MAC_DRP_RNTPKT_EN _SB_MAKEMASK1(23)
+#define M_MAC_DRP_OSZPKT_EN _SB_MAKEMASK1(24)
+#define M_MAC_DRP_LENERRPKT_EN _SB_MAKEMASK1(25)
+
+#define M_MAC_RESERVED3 _SB_MAKEMASK(6, 26)
+
+#define M_MAC_BYPASS_SEL _SB_MAKEMASK1(32)
+#define M_MAC_HDX_EN _SB_MAKEMASK1(33)
+
+#define S_MAC_SPEED_SEL _SB_MAKE64(34)
+#define M_MAC_SPEED_SEL _SB_MAKEMASK(2, S_MAC_SPEED_SEL)
+#define V_MAC_SPEED_SEL(x) _SB_MAKEVALUE(x, S_MAC_SPEED_SEL)
+#define G_MAC_SPEED_SEL(x) _SB_GETVALUE(x, S_MAC_SPEED_SEL, M_MAC_SPEED_SEL)
+
+#define K_MAC_SPEED_SEL_10MBPS 0
+#define K_MAC_SPEED_SEL_100MBPS 1
+#define K_MAC_SPEED_SEL_1000MBPS 2
+#define K_MAC_SPEED_SEL_RESERVED 3
+
+#define V_MAC_SPEED_SEL_10MBPS V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_10MBPS)
+#define V_MAC_SPEED_SEL_100MBPS V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_100MBPS)
+#define V_MAC_SPEED_SEL_1000MBPS V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_1000MBPS)
+#define V_MAC_SPEED_SEL_RESERVED V_MAC_SPEED_SEL(K_MAC_SPEED_SEL_RESERVED)
+
+#define M_MAC_TX_CLK_EDGE_SEL _SB_MAKEMASK1(36)
+#define M_MAC_LOOPBACK_SEL _SB_MAKEMASK1(37)
+#define M_MAC_FAST_SYNC _SB_MAKEMASK1(38)
+#define M_MAC_SS_EN _SB_MAKEMASK1(39)
+
+#define S_MAC_BYPASS_CFG _SB_MAKE64(40)
+#define M_MAC_BYPASS_CFG _SB_MAKEMASK(2, S_MAC_BYPASS_CFG)
+#define V_MAC_BYPASS_CFG(x) _SB_MAKEVALUE(x, S_MAC_BYPASS_CFG)
+#define G_MAC_BYPASS_CFG(x) _SB_GETVALUE(x, S_MAC_BYPASS_CFG, M_MAC_BYPASS_CFG)
+
+#define K_MAC_BYPASS_GMII 0
+#define K_MAC_BYPASS_ENCODED 1
+#define K_MAC_BYPASS_SOP 2
+#define K_MAC_BYPASS_EOP 3
+
+#define M_MAC_BYPASS_16 _SB_MAKEMASK1(42)
+#define M_MAC_BYPASS_FCS_CHK _SB_MAKEMASK1(43)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_RX_CH_SEL_MSB _SB_MAKEMASK1(44)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480*/
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_SPLIT_CH_SEL _SB_MAKEMASK1(45)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define S_MAC_BYPASS_IFG _SB_MAKE64(46)
+#define M_MAC_BYPASS_IFG _SB_MAKEMASK(8, S_MAC_BYPASS_IFG)
+#define V_MAC_BYPASS_IFG(x) _SB_MAKEVALUE(x, S_MAC_BYPASS_IFG)
+#define G_MAC_BYPASS_IFG(x) _SB_GETVALUE(x, S_MAC_BYPASS_IFG, M_MAC_BYPASS_IFG)
+
+#define K_MAC_FC_CMD_DISABLED 0
+#define K_MAC_FC_CMD_ENABLED 1
+#define K_MAC_FC_CMD_ENAB_FALSECARR 2
+
+#define V_MAC_FC_CMD_DISABLED V_MAC_FC_CMD(K_MAC_FC_CMD_DISABLED)
+#define V_MAC_FC_CMD_ENABLED V_MAC_FC_CMD(K_MAC_FC_CMD_ENABLED)
+#define V_MAC_FC_CMD_ENAB_FALSECARR V_MAC_FC_CMD(K_MAC_FC_CMD_ENAB_FALSECARR)
+
+#define M_MAC_FC_SEL _SB_MAKEMASK1(54)
+
+#define S_MAC_FC_CMD _SB_MAKE64(55)
+#define M_MAC_FC_CMD _SB_MAKEMASK(2, S_MAC_FC_CMD)
+#define V_MAC_FC_CMD(x) _SB_MAKEVALUE(x, S_MAC_FC_CMD)
+#define G_MAC_FC_CMD(x) _SB_GETVALUE(x, S_MAC_FC_CMD, M_MAC_FC_CMD)
+
+#define S_MAC_RX_CH_SEL _SB_MAKE64(57)
+#define M_MAC_RX_CH_SEL _SB_MAKEMASK(7, S_MAC_RX_CH_SEL)
+#define V_MAC_RX_CH_SEL(x) _SB_MAKEVALUE(x, S_MAC_RX_CH_SEL)
+#define G_MAC_RX_CH_SEL(x) _SB_GETVALUE(x, S_MAC_RX_CH_SEL, M_MAC_RX_CH_SEL)
+
+
+/*
+ * MAC Enable Registers
+ * Register: MAC_ENABLE_0
+ * Register: MAC_ENABLE_1
+ * Register: MAC_ENABLE_2
+ */
+
+#define M_MAC_RXDMA_EN0 _SB_MAKEMASK1(0)
+#define M_MAC_RXDMA_EN1 _SB_MAKEMASK1(1)
+#define M_MAC_TXDMA_EN0 _SB_MAKEMASK1(4)
+#define M_MAC_TXDMA_EN1 _SB_MAKEMASK1(5)
+
+#define M_MAC_PORT_RESET _SB_MAKEMASK1(8)
+
+#if (SIBYTE_HDR_FEATURE_CHIP(1250) || SIBYTE_HDR_FEATURE_CHIP(112x))
+#define M_MAC_RX_ENABLE _SB_MAKEMASK1(10)
+#define M_MAC_TX_ENABLE _SB_MAKEMASK1(11)
+#define M_MAC_BYP_RX_ENABLE _SB_MAKEMASK1(12)
+#define M_MAC_BYP_TX_ENABLE _SB_MAKEMASK1(13)
+#endif
+
+/*
+ * MAC reset information register (1280/1255)
+ */
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_RX_CH0_PAUSE_ON _SB_MAKEMASK1(8)
+#define M_MAC_RX_CH1_PAUSE_ON _SB_MAKEMASK1(16)
+#define M_MAC_TX_CH0_PAUSE_ON _SB_MAKEMASK1(24)
+#define M_MAC_TX_CH1_PAUSE_ON _SB_MAKEMASK1(32)
+#endif
+
+/*
+ * MAC DMA Control Register
+ * Register: MAC_TXD_CTL_0
+ * Register: MAC_TXD_CTL_1
+ * Register: MAC_TXD_CTL_2
+ */
+
+#define S_MAC_TXD_WEIGHT0 _SB_MAKE64(0)
+#define M_MAC_TXD_WEIGHT0 _SB_MAKEMASK(4, S_MAC_TXD_WEIGHT0)
+#define V_MAC_TXD_WEIGHT0(x) _SB_MAKEVALUE(x, S_MAC_TXD_WEIGHT0)
+#define G_MAC_TXD_WEIGHT0(x) _SB_GETVALUE(x, S_MAC_TXD_WEIGHT0, M_MAC_TXD_WEIGHT0)
+
+#define S_MAC_TXD_WEIGHT1 _SB_MAKE64(4)
+#define M_MAC_TXD_WEIGHT1 _SB_MAKEMASK(4, S_MAC_TXD_WEIGHT1)
+#define V_MAC_TXD_WEIGHT1(x) _SB_MAKEVALUE(x, S_MAC_TXD_WEIGHT1)
+#define G_MAC_TXD_WEIGHT1(x) _SB_GETVALUE(x, S_MAC_TXD_WEIGHT1, M_MAC_TXD_WEIGHT1)
+
+/*
+ * MAC Fifo Threshhold registers (Table 9-14)
+ * Register: MAC_THRSH_CFG_0
+ * Register: MAC_THRSH_CFG_1
+ * Register: MAC_THRSH_CFG_2
+ */
+
+#define S_MAC_TX_WR_THRSH _SB_MAKE64(0)
+#if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1)
+/* XXX: Can't enable, as it has the same name as a pass2+ define below. */
+/* #define M_MAC_TX_WR_THRSH _SB_MAKEMASK(6, S_MAC_TX_WR_THRSH) */
+#endif /* up to 1250 PASS1 */
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_TX_WR_THRSH _SB_MAKEMASK(7, S_MAC_TX_WR_THRSH)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+#define V_MAC_TX_WR_THRSH(x) _SB_MAKEVALUE(x, S_MAC_TX_WR_THRSH)
+#define G_MAC_TX_WR_THRSH(x) _SB_GETVALUE(x, S_MAC_TX_WR_THRSH, M_MAC_TX_WR_THRSH)
+
+#define S_MAC_TX_RD_THRSH _SB_MAKE64(8)
+#if SIBYTE_HDR_FEATURE_UP_TO(1250, PASS1)
+/* XXX: Can't enable, as it has the same name as a pass2+ define below. */
+/* #define M_MAC_TX_RD_THRSH _SB_MAKEMASK(6, S_MAC_TX_RD_THRSH) */
+#endif /* up to 1250 PASS1 */
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_TX_RD_THRSH _SB_MAKEMASK(7, S_MAC_TX_RD_THRSH)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+#define V_MAC_TX_RD_THRSH(x) _SB_MAKEVALUE(x, S_MAC_TX_RD_THRSH)
+#define G_MAC_TX_RD_THRSH(x) _SB_GETVALUE(x, S_MAC_TX_RD_THRSH, M_MAC_TX_RD_THRSH)
+
+#define S_MAC_TX_RL_THRSH _SB_MAKE64(16)
+#define M_MAC_TX_RL_THRSH _SB_MAKEMASK(4, S_MAC_TX_RL_THRSH)
+#define V_MAC_TX_RL_THRSH(x) _SB_MAKEVALUE(x, S_MAC_TX_RL_THRSH)
+#define G_MAC_TX_RL_THRSH(x) _SB_GETVALUE(x, S_MAC_TX_RL_THRSH, M_MAC_TX_RL_THRSH)
+
+#define S_MAC_RX_PL_THRSH _SB_MAKE64(24)
+#define M_MAC_RX_PL_THRSH _SB_MAKEMASK(6, S_MAC_RX_PL_THRSH)
+#define V_MAC_RX_PL_THRSH(x) _SB_MAKEVALUE(x, S_MAC_RX_PL_THRSH)
+#define G_MAC_RX_PL_THRSH(x) _SB_GETVALUE(x, S_MAC_RX_PL_THRSH, M_MAC_RX_PL_THRSH)
+
+#define S_MAC_RX_RD_THRSH _SB_MAKE64(32)
+#define M_MAC_RX_RD_THRSH _SB_MAKEMASK(6, S_MAC_RX_RD_THRSH)
+#define V_MAC_RX_RD_THRSH(x) _SB_MAKEVALUE(x, S_MAC_RX_RD_THRSH)
+#define G_MAC_RX_RD_THRSH(x) _SB_GETVALUE(x, S_MAC_RX_RD_THRSH, M_MAC_RX_RD_THRSH)
+
+#define S_MAC_RX_RL_THRSH _SB_MAKE64(40)
+#define M_MAC_RX_RL_THRSH _SB_MAKEMASK(6, S_MAC_RX_RL_THRSH)
+#define V_MAC_RX_RL_THRSH(x) _SB_MAKEVALUE(x, S_MAC_RX_RL_THRSH)
+#define G_MAC_RX_RL_THRSH(x) _SB_GETVALUE(x, S_MAC_RX_RL_THRSH, M_MAC_RX_RL_THRSH)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_MAC_ENC_FC_THRSH _SB_MAKE64(56)
+#define M_MAC_ENC_FC_THRSH _SB_MAKEMASK(6, S_MAC_ENC_FC_THRSH)
+#define V_MAC_ENC_FC_THRSH(x) _SB_MAKEVALUE(x, S_MAC_ENC_FC_THRSH)
+#define G_MAC_ENC_FC_THRSH(x) _SB_GETVALUE(x, S_MAC_ENC_FC_THRSH, M_MAC_ENC_FC_THRSH)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+/*
+ * MAC Frame Configuration Registers (Table 9-15)
+ * Register: MAC_FRAME_CFG_0
+ * Register: MAC_FRAME_CFG_1
+ * Register: MAC_FRAME_CFG_2
+ */
+
+/* XXXCGD: ??? Unused in pass2? */
+#define S_MAC_IFG_RX _SB_MAKE64(0)
+#define M_MAC_IFG_RX _SB_MAKEMASK(6, S_MAC_IFG_RX)
+#define V_MAC_IFG_RX(x) _SB_MAKEVALUE(x, S_MAC_IFG_RX)
+#define G_MAC_IFG_RX(x) _SB_GETVALUE(x, S_MAC_IFG_RX, M_MAC_IFG_RX)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_MAC_PRE_LEN _SB_MAKE64(0)
+#define M_MAC_PRE_LEN _SB_MAKEMASK(6, S_MAC_PRE_LEN)
+#define V_MAC_PRE_LEN(x) _SB_MAKEVALUE(x, S_MAC_PRE_LEN)
+#define G_MAC_PRE_LEN(x) _SB_GETVALUE(x, S_MAC_PRE_LEN, M_MAC_PRE_LEN)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define S_MAC_IFG_TX _SB_MAKE64(6)
+#define M_MAC_IFG_TX _SB_MAKEMASK(6, S_MAC_IFG_TX)
+#define V_MAC_IFG_TX(x) _SB_MAKEVALUE(x, S_MAC_IFG_TX)
+#define G_MAC_IFG_TX(x) _SB_GETVALUE(x, S_MAC_IFG_TX, M_MAC_IFG_TX)
+
+#define S_MAC_IFG_THRSH _SB_MAKE64(12)
+#define M_MAC_IFG_THRSH _SB_MAKEMASK(6, S_MAC_IFG_THRSH)
+#define V_MAC_IFG_THRSH(x) _SB_MAKEVALUE(x, S_MAC_IFG_THRSH)
+#define G_MAC_IFG_THRSH(x) _SB_GETVALUE(x, S_MAC_IFG_THRSH, M_MAC_IFG_THRSH)
+
+#define S_MAC_BACKOFF_SEL _SB_MAKE64(18)
+#define M_MAC_BACKOFF_SEL _SB_MAKEMASK(4, S_MAC_BACKOFF_SEL)
+#define V_MAC_BACKOFF_SEL(x) _SB_MAKEVALUE(x, S_MAC_BACKOFF_SEL)
+#define G_MAC_BACKOFF_SEL(x) _SB_GETVALUE(x, S_MAC_BACKOFF_SEL, M_MAC_BACKOFF_SEL)
+
+#define S_MAC_LFSR_SEED _SB_MAKE64(22)
+#define M_MAC_LFSR_SEED _SB_MAKEMASK(8, S_MAC_LFSR_SEED)
+#define V_MAC_LFSR_SEED(x) _SB_MAKEVALUE(x, S_MAC_LFSR_SEED)
+#define G_MAC_LFSR_SEED(x) _SB_GETVALUE(x, S_MAC_LFSR_SEED, M_MAC_LFSR_SEED)
+
+#define S_MAC_SLOT_SIZE _SB_MAKE64(30)
+#define M_MAC_SLOT_SIZE _SB_MAKEMASK(10, S_MAC_SLOT_SIZE)
+#define V_MAC_SLOT_SIZE(x) _SB_MAKEVALUE(x, S_MAC_SLOT_SIZE)
+#define G_MAC_SLOT_SIZE(x) _SB_GETVALUE(x, S_MAC_SLOT_SIZE, M_MAC_SLOT_SIZE)
+
+#define S_MAC_MIN_FRAMESZ _SB_MAKE64(40)
+#define M_MAC_MIN_FRAMESZ _SB_MAKEMASK(8, S_MAC_MIN_FRAMESZ)
+#define V_MAC_MIN_FRAMESZ(x) _SB_MAKEVALUE(x, S_MAC_MIN_FRAMESZ)
+#define G_MAC_MIN_FRAMESZ(x) _SB_GETVALUE(x, S_MAC_MIN_FRAMESZ, M_MAC_MIN_FRAMESZ)
+
+#define S_MAC_MAX_FRAMESZ _SB_MAKE64(48)
+#define M_MAC_MAX_FRAMESZ _SB_MAKEMASK(16, S_MAC_MAX_FRAMESZ)
+#define V_MAC_MAX_FRAMESZ(x) _SB_MAKEVALUE(x, S_MAC_MAX_FRAMESZ)
+#define G_MAC_MAX_FRAMESZ(x) _SB_GETVALUE(x, S_MAC_MAX_FRAMESZ, M_MAC_MAX_FRAMESZ)
+
+/*
+ * These constants are used to configure the fields within the Frame
+ * Configuration Register.
+ */
+
+#define K_MAC_IFG_RX_10 _SB_MAKE64(0) /* See table 176, not used */
+#define K_MAC_IFG_RX_100 _SB_MAKE64(0)
+#define K_MAC_IFG_RX_1000 _SB_MAKE64(0)
+
+#define K_MAC_IFG_TX_10 _SB_MAKE64(20)
+#define K_MAC_IFG_TX_100 _SB_MAKE64(20)
+#define K_MAC_IFG_TX_1000 _SB_MAKE64(8)
+
+#define K_MAC_IFG_THRSH_10 _SB_MAKE64(4)
+#define K_MAC_IFG_THRSH_100 _SB_MAKE64(4)
+#define K_MAC_IFG_THRSH_1000 _SB_MAKE64(0)
+
+#define K_MAC_SLOT_SIZE_10 _SB_MAKE64(0)
+#define K_MAC_SLOT_SIZE_100 _SB_MAKE64(0)
+#define K_MAC_SLOT_SIZE_1000 _SB_MAKE64(0)
+
+#define V_MAC_IFG_RX_10 V_MAC_IFG_RX(K_MAC_IFG_RX_10)
+#define V_MAC_IFG_RX_100 V_MAC_IFG_RX(K_MAC_IFG_RX_100)
+#define V_MAC_IFG_RX_1000 V_MAC_IFG_RX(K_MAC_IFG_RX_1000)
+
+#define V_MAC_IFG_TX_10 V_MAC_IFG_TX(K_MAC_IFG_TX_10)
+#define V_MAC_IFG_TX_100 V_MAC_IFG_TX(K_MAC_IFG_TX_100)
+#define V_MAC_IFG_TX_1000 V_MAC_IFG_TX(K_MAC_IFG_TX_1000)
+
+#define V_MAC_IFG_THRSH_10 V_MAC_IFG_THRSH(K_MAC_IFG_THRSH_10)
+#define V_MAC_IFG_THRSH_100 V_MAC_IFG_THRSH(K_MAC_IFG_THRSH_100)
+#define V_MAC_IFG_THRSH_1000 V_MAC_IFG_THRSH(K_MAC_IFG_THRSH_1000)
+
+#define V_MAC_SLOT_SIZE_10 V_MAC_SLOT_SIZE(K_MAC_SLOT_SIZE_10)
+#define V_MAC_SLOT_SIZE_100 V_MAC_SLOT_SIZE(K_MAC_SLOT_SIZE_100)
+#define V_MAC_SLOT_SIZE_1000 V_MAC_SLOT_SIZE(K_MAC_SLOT_SIZE_1000)
+
+#define K_MAC_MIN_FRAMESZ_FIFO _SB_MAKE64(9)
+#define K_MAC_MIN_FRAMESZ_DEFAULT _SB_MAKE64(64)
+#define K_MAC_MAX_FRAMESZ_DEFAULT _SB_MAKE64(1518)
+#define K_MAC_MAX_FRAMESZ_JUMBO _SB_MAKE64(9216)
+
+#define V_MAC_MIN_FRAMESZ_FIFO V_MAC_MIN_FRAMESZ(K_MAC_MIN_FRAMESZ_FIFO)
+#define V_MAC_MIN_FRAMESZ_DEFAULT V_MAC_MIN_FRAMESZ(K_MAC_MIN_FRAMESZ_DEFAULT)
+#define V_MAC_MAX_FRAMESZ_DEFAULT V_MAC_MAX_FRAMESZ(K_MAC_MAX_FRAMESZ_DEFAULT)
+#define V_MAC_MAX_FRAMESZ_JUMBO V_MAC_MAX_FRAMESZ(K_MAC_MAX_FRAMESZ_JUMBO)
+
+/*
+ * MAC VLAN Tag Registers (Table 9-16)
+ * Register: MAC_VLANTAG_0
+ * Register: MAC_VLANTAG_1
+ * Register: MAC_VLANTAG_2
+ */
+
+#define S_MAC_VLAN_TAG _SB_MAKE64(0)
+#define M_MAC_VLAN_TAG _SB_MAKEMASK(32, S_MAC_VLAN_TAG)
+#define V_MAC_VLAN_TAG(x) _SB_MAKEVALUE(x, S_MAC_VLAN_TAG)
+#define G_MAC_VLAN_TAG(x) _SB_GETVALUE(x, S_MAC_VLAN_TAG, M_MAC_VLAN_TAG)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define S_MAC_TX_PKT_OFFSET _SB_MAKE64(32)
+#define M_MAC_TX_PKT_OFFSET _SB_MAKEMASK(8, S_MAC_TX_PKT_OFFSET)
+#define V_MAC_TX_PKT_OFFSET(x) _SB_MAKEVALUE(x, S_MAC_TX_PKT_OFFSET)
+#define G_MAC_TX_PKT_OFFSET(x) _SB_GETVALUE(x, S_MAC_TX_PKT_OFFSET, M_MAC_TX_PKT_OFFSET)
+
+#define S_MAC_TX_CRC_OFFSET _SB_MAKE64(40)
+#define M_MAC_TX_CRC_OFFSET _SB_MAKEMASK(8, S_MAC_TX_CRC_OFFSET)
+#define V_MAC_TX_CRC_OFFSET(x) _SB_MAKEVALUE(x, S_MAC_TX_CRC_OFFSET)
+#define G_MAC_TX_CRC_OFFSET(x) _SB_GETVALUE(x, S_MAC_TX_CRC_OFFSET, M_MAC_TX_CRC_OFFSET)
+
+#define M_MAC_CH_BASE_FC_EN _SB_MAKEMASK1(48)
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+/*
+ * MAC Status Registers (Table 9-17)
+ * Also used for the MAC Interrupt Mask Register (Table 9-18)
+ * Register: MAC_STATUS_0
+ * Register: MAC_STATUS_1
+ * Register: MAC_STATUS_2
+ * Register: MAC_INT_MASK_0
+ * Register: MAC_INT_MASK_1
+ * Register: MAC_INT_MASK_2
+ */
+
+/*
+ * Use these constants to shift the appropriate channel
+ * into the CH0 position so the same tests can be used
+ * on each channel.
+ */
+
+#define S_MAC_RX_CH0 _SB_MAKE64(0)
+#define S_MAC_RX_CH1 _SB_MAKE64(8)
+#define S_MAC_TX_CH0 _SB_MAKE64(16)
+#define S_MAC_TX_CH1 _SB_MAKE64(24)
+
+#define S_MAC_TXCHANNELS _SB_MAKE64(16) /* this is 1st TX chan */
+#define S_MAC_CHANWIDTH _SB_MAKE64(8) /* bits between channels */
+
+/*
+ * These are the same as RX channel 0. The idea here
+ * is that you'll use one of the "S_" things above
+ * and pass just the six bits to a DMA-channel-specific ISR
+ */
+#define M_MAC_INT_CHANNEL _SB_MAKEMASK(8, 0)
+#define M_MAC_INT_EOP_COUNT _SB_MAKEMASK1(0)
+#define M_MAC_INT_EOP_TIMER _SB_MAKEMASK1(1)
+#define M_MAC_INT_EOP_SEEN _SB_MAKEMASK1(2)
+#define M_MAC_INT_HWM _SB_MAKEMASK1(3)
+#define M_MAC_INT_LWM _SB_MAKEMASK1(4)
+#define M_MAC_INT_DSCR _SB_MAKEMASK1(5)
+#define M_MAC_INT_ERR _SB_MAKEMASK1(6)
+#define M_MAC_INT_DZERO _SB_MAKEMASK1(7) /* only for TX channels */
+#define M_MAC_INT_DROP _SB_MAKEMASK1(7) /* only for RX channels */
+
+/*
+ * In the following definitions we use ch (0/1) and txrx (TX=1, RX=0, see
+ * also DMA_TX/DMA_RX in sb_regs.h).
+ */
+#define S_MAC_STATUS_CH_OFFSET(ch, txrx) _SB_MAKE64(((ch) + 2 * (txrx)) * S_MAC_CHANWIDTH)
+
+#define M_MAC_STATUS_CHANNEL(ch, txrx) _SB_MAKEVALUE(_SB_MAKEMASK(8, 0), S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_EOP_COUNT(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_EOP_COUNT, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_EOP_TIMER(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_EOP_TIMER, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_EOP_SEEN(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_EOP_SEEN, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_HWM(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_HWM, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_LWM(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_LWM, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_DSCR(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_DSCR, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_ERR(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_ERR, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_DZERO(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_DZERO, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_DROP(ch, txrx) _SB_MAKEVALUE(M_MAC_INT_DROP, S_MAC_STATUS_CH_OFFSET(ch, txrx))
+#define M_MAC_STATUS_OTHER_ERR _SB_MAKEVALUE(_SB_MAKEMASK(7, 0), 40)
+
+
+#define M_MAC_RX_UNDRFL _SB_MAKEMASK1(40)
+#define M_MAC_RX_OVRFL _SB_MAKEMASK1(41)
+#define M_MAC_TX_UNDRFL _SB_MAKEMASK1(42)
+#define M_MAC_TX_OVRFL _SB_MAKEMASK1(43)
+#define M_MAC_LTCOL_ERR _SB_MAKEMASK1(44)
+#define M_MAC_EXCOL_ERR _SB_MAKEMASK1(45)
+#define M_MAC_CNTR_OVRFL_ERR _SB_MAKEMASK1(46)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_SPLIT_EN _SB_MAKEMASK1(47) /* interrupt mask only */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+#define S_MAC_COUNTER_ADDR _SB_MAKE64(47)
+#define M_MAC_COUNTER_ADDR _SB_MAKEMASK(5, S_MAC_COUNTER_ADDR)
+#define V_MAC_COUNTER_ADDR(x) _SB_MAKEVALUE(x, S_MAC_COUNTER_ADDR)
+#define G_MAC_COUNTER_ADDR(x) _SB_GETVALUE(x, S_MAC_COUNTER_ADDR, M_MAC_COUNTER_ADDR)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_TX_PAUSE_ON _SB_MAKEMASK1(52)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+/*
+ * MAC Fifo Pointer Registers (Table 9-19) [Debug register]
+ * Register: MAC_FIFO_PTRS_0
+ * Register: MAC_FIFO_PTRS_1
+ * Register: MAC_FIFO_PTRS_2
+ */
+
+#define S_MAC_TX_WRPTR _SB_MAKE64(0)
+#define M_MAC_TX_WRPTR _SB_MAKEMASK(6, S_MAC_TX_WRPTR)
+#define V_MAC_TX_WRPTR(x) _SB_MAKEVALUE(x, S_MAC_TX_WRPTR)
+#define G_MAC_TX_WRPTR(x) _SB_GETVALUE(x, S_MAC_TX_WRPTR, M_MAC_TX_WRPTR)
+
+#define S_MAC_TX_RDPTR _SB_MAKE64(8)
+#define M_MAC_TX_RDPTR _SB_MAKEMASK(6, S_MAC_TX_RDPTR)
+#define V_MAC_TX_RDPTR(x) _SB_MAKEVALUE(x, S_MAC_TX_RDPTR)
+#define G_MAC_TX_RDPTR(x) _SB_GETVALUE(x, S_MAC_TX_RDPTR, M_MAC_TX_RDPTR)
+
+#define S_MAC_RX_WRPTR _SB_MAKE64(16)
+#define M_MAC_RX_WRPTR _SB_MAKEMASK(6, S_MAC_RX_WRPTR)
+#define V_MAC_RX_WRPTR(x) _SB_MAKEVALUE(x, S_MAC_RX_WRPTR)
+#define G_MAC_RX_WRPTR(x) _SB_GETVALUE(x, S_MAC_RX_WRPTR, M_MAC_TX_WRPTR)
+
+#define S_MAC_RX_RDPTR _SB_MAKE64(24)
+#define M_MAC_RX_RDPTR _SB_MAKEMASK(6, S_MAC_RX_RDPTR)
+#define V_MAC_RX_RDPTR(x) _SB_MAKEVALUE(x, S_MAC_RX_RDPTR)
+#define G_MAC_RX_RDPTR(x) _SB_GETVALUE(x, S_MAC_RX_RDPTR, M_MAC_TX_RDPTR)
+
+/*
+ * MAC Fifo End Of Packet Count Registers (Table 9-20) [Debug register]
+ * Register: MAC_EOPCNT_0
+ * Register: MAC_EOPCNT_1
+ * Register: MAC_EOPCNT_2
+ */
+
+#define S_MAC_TX_EOP_COUNTER _SB_MAKE64(0)
+#define M_MAC_TX_EOP_COUNTER _SB_MAKEMASK(6, S_MAC_TX_EOP_COUNTER)
+#define V_MAC_TX_EOP_COUNTER(x) _SB_MAKEVALUE(x, S_MAC_TX_EOP_COUNTER)
+#define G_MAC_TX_EOP_COUNTER(x) _SB_GETVALUE(x, S_MAC_TX_EOP_COUNTER, M_MAC_TX_EOP_COUNTER)
+
+#define S_MAC_RX_EOP_COUNTER _SB_MAKE64(8)
+#define M_MAC_RX_EOP_COUNTER _SB_MAKEMASK(6, S_MAC_RX_EOP_COUNTER)
+#define V_MAC_RX_EOP_COUNTER(x) _SB_MAKEVALUE(x, S_MAC_RX_EOP_COUNTER)
+#define G_MAC_RX_EOP_COUNTER(x) _SB_GETVALUE(x, S_MAC_RX_EOP_COUNTER, M_MAC_RX_EOP_COUNTER)
+
+/*
+ * MAC Recieve Address Filter Exact Match Registers (Table 9-21)
+ * Registers: MAC_ADDR0_0 through MAC_ADDR7_0
+ * Registers: MAC_ADDR0_1 through MAC_ADDR7_1
+ * Registers: MAC_ADDR0_2 through MAC_ADDR7_2
+ */
+
+/* No bitfields */
+
+/*
+ * MAC Receive Address Filter Mask Registers
+ * Registers: MAC_ADDRMASK0_0 and MAC_ADDRMASK0_1
+ * Registers: MAC_ADDRMASK1_0 and MAC_ADDRMASK1_1
+ * Registers: MAC_ADDRMASK2_0 and MAC_ADDRMASK2_1
+ */
+
+/* No bitfields */
+
+/*
+ * MAC Recieve Address Filter Hash Match Registers (Table 9-22)
+ * Registers: MAC_HASH0_0 through MAC_HASH7_0
+ * Registers: MAC_HASH0_1 through MAC_HASH7_1
+ * Registers: MAC_HASH0_2 through MAC_HASH7_2
+ */
+
+/* No bitfields */
+
+/*
+ * MAC Transmit Source Address Registers (Table 9-23)
+ * Register: MAC_ETHERNET_ADDR_0
+ * Register: MAC_ETHERNET_ADDR_1
+ * Register: MAC_ETHERNET_ADDR_2
+ */
+
+/* No bitfields */
+
+/*
+ * MAC Packet Type Configuration Register
+ * Register: MAC_TYPE_CFG_0
+ * Register: MAC_TYPE_CFG_1
+ * Register: MAC_TYPE_CFG_2
+ */
+
+#define S_TYPECFG_TYPESIZE _SB_MAKE64(16)
+
+#define S_TYPECFG_TYPE0 _SB_MAKE64(0)
+#define M_TYPECFG_TYPE0 _SB_MAKEMASK(16, S_TYPECFG_TYPE0)
+#define V_TYPECFG_TYPE0(x) _SB_MAKEVALUE(x, S_TYPECFG_TYPE0)
+#define G_TYPECFG_TYPE0(x) _SB_GETVALUE(x, S_TYPECFG_TYPE0, M_TYPECFG_TYPE0)
+
+#define S_TYPECFG_TYPE1 _SB_MAKE64(0)
+#define M_TYPECFG_TYPE1 _SB_MAKEMASK(16, S_TYPECFG_TYPE1)
+#define V_TYPECFG_TYPE1(x) _SB_MAKEVALUE(x, S_TYPECFG_TYPE1)
+#define G_TYPECFG_TYPE1(x) _SB_GETVALUE(x, S_TYPECFG_TYPE1, M_TYPECFG_TYPE1)
+
+#define S_TYPECFG_TYPE2 _SB_MAKE64(0)
+#define M_TYPECFG_TYPE2 _SB_MAKEMASK(16, S_TYPECFG_TYPE2)
+#define V_TYPECFG_TYPE2(x) _SB_MAKEVALUE(x, S_TYPECFG_TYPE2)
+#define G_TYPECFG_TYPE2(x) _SB_GETVALUE(x, S_TYPECFG_TYPE2, M_TYPECFG_TYPE2)
+
+#define S_TYPECFG_TYPE3 _SB_MAKE64(0)
+#define M_TYPECFG_TYPE3 _SB_MAKEMASK(16, S_TYPECFG_TYPE3)
+#define V_TYPECFG_TYPE3(x) _SB_MAKEVALUE(x, S_TYPECFG_TYPE3)
+#define G_TYPECFG_TYPE3(x) _SB_GETVALUE(x, S_TYPECFG_TYPE3, M_TYPECFG_TYPE3)
+
+/*
+ * MAC Receive Address Filter Control Registers (Table 9-24)
+ * Register: MAC_ADFILTER_CFG_0
+ * Register: MAC_ADFILTER_CFG_1
+ * Register: MAC_ADFILTER_CFG_2
+ */
+
+#define M_MAC_ALLPKT_EN _SB_MAKEMASK1(0)
+#define M_MAC_UCAST_EN _SB_MAKEMASK1(1)
+#define M_MAC_UCAST_INV _SB_MAKEMASK1(2)
+#define M_MAC_MCAST_EN _SB_MAKEMASK1(3)
+#define M_MAC_MCAST_INV _SB_MAKEMASK1(4)
+#define M_MAC_BCAST_EN _SB_MAKEMASK1(5)
+#define M_MAC_DIRECT_INV _SB_MAKEMASK1(6)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_ALLMCAST_EN _SB_MAKEMASK1(7)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+#define S_MAC_IPHDR_OFFSET _SB_MAKE64(8)
+#define M_MAC_IPHDR_OFFSET _SB_MAKEMASK(8, S_MAC_IPHDR_OFFSET)
+#define V_MAC_IPHDR_OFFSET(x) _SB_MAKEVALUE(x, S_MAC_IPHDR_OFFSET)
+#define G_MAC_IPHDR_OFFSET(x) _SB_GETVALUE(x, S_MAC_IPHDR_OFFSET, M_MAC_IPHDR_OFFSET)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_MAC_RX_CRC_OFFSET _SB_MAKE64(16)
+#define M_MAC_RX_CRC_OFFSET _SB_MAKEMASK(8, S_MAC_RX_CRC_OFFSET)
+#define V_MAC_RX_CRC_OFFSET(x) _SB_MAKEVALUE(x, S_MAC_RX_CRC_OFFSET)
+#define G_MAC_RX_CRC_OFFSET(x) _SB_GETVALUE(x, S_MAC_RX_CRC_OFFSET, M_MAC_RX_CRC_OFFSET)
+
+#define S_MAC_RX_PKT_OFFSET _SB_MAKE64(24)
+#define M_MAC_RX_PKT_OFFSET _SB_MAKEMASK(8, S_MAC_RX_PKT_OFFSET)
+#define V_MAC_RX_PKT_OFFSET(x) _SB_MAKEVALUE(x, S_MAC_RX_PKT_OFFSET)
+#define G_MAC_RX_PKT_OFFSET(x) _SB_GETVALUE(x, S_MAC_RX_PKT_OFFSET, M_MAC_RX_PKT_OFFSET)
+
+#define M_MAC_FWDPAUSE_EN _SB_MAKEMASK1(32)
+#define M_MAC_VLAN_DET_EN _SB_MAKEMASK1(33)
+
+#define S_MAC_RX_CH_MSN_SEL _SB_MAKE64(34)
+#define M_MAC_RX_CH_MSN_SEL _SB_MAKEMASK(8, S_MAC_RX_CH_MSN_SEL)
+#define V_MAC_RX_CH_MSN_SEL(x) _SB_MAKEVALUE(x, S_MAC_RX_CH_MSN_SEL)
+#define G_MAC_RX_CH_MSN_SEL(x) _SB_GETVALUE(x, S_MAC_RX_CH_MSN_SEL, M_MAC_RX_CH_MSN_SEL)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+/*
+ * MAC Receive Channel Select Registers (Table 9-25)
+ */
+
+/* no bitfields */
+
+/*
+ * MAC MII Management Interface Registers (Table 9-26)
+ * Register: MAC_MDIO_0
+ * Register: MAC_MDIO_1
+ * Register: MAC_MDIO_2
+ */
+
+#define S_MAC_MDC 0
+#define S_MAC_MDIO_DIR 1
+#define S_MAC_MDIO_OUT 2
+#define S_MAC_GENC 3
+#define S_MAC_MDIO_IN 4
+
+#define M_MAC_MDC _SB_MAKEMASK1(S_MAC_MDC)
+#define M_MAC_MDIO_DIR _SB_MAKEMASK1(S_MAC_MDIO_DIR)
+#define M_MAC_MDIO_DIR_INPUT _SB_MAKEMASK1(S_MAC_MDIO_DIR)
+#define M_MAC_MDIO_OUT _SB_MAKEMASK1(S_MAC_MDIO_OUT)
+#define M_MAC_GENC _SB_MAKEMASK1(S_MAC_GENC)
+#define M_MAC_MDIO_IN _SB_MAKEMASK1(S_MAC_MDIO_IN)
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_mc.h b/arch/mips/include/asm/sibyte/sb1250_mc.h
new file mode 100644
index 00000000000..1eb1b5a8873
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_mc.h
@@ -0,0 +1,550 @@
+/* *********************************************************************
+ * SB1250 Board Support Package
+ *
+ * Memory Controller constants File: sb1250_mc.h
+ *
+ * This module contains constants and macros useful for
+ * programming the memory controller.
+ *
+ * SB1250 specification level: User's manual 1/02/02
+ *
+ *********************************************************************
+ *
+ * Copyright 2000, 2001, 2002, 2003
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+
+#ifndef _SB1250_MC_H
+#define _SB1250_MC_H
+
+#include "sb1250_defs.h"
+
+/*
+ * Memory Channel Config Register (table 6-14)
+ */
+
+#define S_MC_RESERVED0 0
+#define M_MC_RESERVED0 _SB_MAKEMASK(8, S_MC_RESERVED0)
+
+#define S_MC_CHANNEL_SEL 8
+#define M_MC_CHANNEL_SEL _SB_MAKEMASK(8, S_MC_CHANNEL_SEL)
+#define V_MC_CHANNEL_SEL(x) _SB_MAKEVALUE(x, S_MC_CHANNEL_SEL)
+#define G_MC_CHANNEL_SEL(x) _SB_GETVALUE(x, S_MC_CHANNEL_SEL, M_MC_CHANNEL_SEL)
+
+#define S_MC_BANK0_MAP 16
+#define M_MC_BANK0_MAP _SB_MAKEMASK(4, S_MC_BANK0_MAP)
+#define V_MC_BANK0_MAP(x) _SB_MAKEVALUE(x, S_MC_BANK0_MAP)
+#define G_MC_BANK0_MAP(x) _SB_GETVALUE(x, S_MC_BANK0_MAP, M_MC_BANK0_MAP)
+
+#define K_MC_BANK0_MAP_DEFAULT 0x00
+#define V_MC_BANK0_MAP_DEFAULT V_MC_BANK0_MAP(K_MC_BANK0_MAP_DEFAULT)
+
+#define S_MC_BANK1_MAP 20
+#define M_MC_BANK1_MAP _SB_MAKEMASK(4, S_MC_BANK1_MAP)
+#define V_MC_BANK1_MAP(x) _SB_MAKEVALUE(x, S_MC_BANK1_MAP)
+#define G_MC_BANK1_MAP(x) _SB_GETVALUE(x, S_MC_BANK1_MAP, M_MC_BANK1_MAP)
+
+#define K_MC_BANK1_MAP_DEFAULT 0x08
+#define V_MC_BANK1_MAP_DEFAULT V_MC_BANK1_MAP(K_MC_BANK1_MAP_DEFAULT)
+
+#define S_MC_BANK2_MAP 24
+#define M_MC_BANK2_MAP _SB_MAKEMASK(4, S_MC_BANK2_MAP)
+#define V_MC_BANK2_MAP(x) _SB_MAKEVALUE(x, S_MC_BANK2_MAP)
+#define G_MC_BANK2_MAP(x) _SB_GETVALUE(x, S_MC_BANK2_MAP, M_MC_BANK2_MAP)
+
+#define K_MC_BANK2_MAP_DEFAULT 0x09
+#define V_MC_BANK2_MAP_DEFAULT V_MC_BANK2_MAP(K_MC_BANK2_MAP_DEFAULT)
+
+#define S_MC_BANK3_MAP 28
+#define M_MC_BANK3_MAP _SB_MAKEMASK(4, S_MC_BANK3_MAP)
+#define V_MC_BANK3_MAP(x) _SB_MAKEVALUE(x, S_MC_BANK3_MAP)
+#define G_MC_BANK3_MAP(x) _SB_GETVALUE(x, S_MC_BANK3_MAP, M_MC_BANK3_MAP)
+
+#define K_MC_BANK3_MAP_DEFAULT 0x0C
+#define V_MC_BANK3_MAP_DEFAULT V_MC_BANK3_MAP(K_MC_BANK3_MAP_DEFAULT)
+
+#define M_MC_RESERVED1 _SB_MAKEMASK(8, 32)
+
+#define S_MC_QUEUE_SIZE 40
+#define M_MC_QUEUE_SIZE _SB_MAKEMASK(4, S_MC_QUEUE_SIZE)
+#define V_MC_QUEUE_SIZE(x) _SB_MAKEVALUE(x, S_MC_QUEUE_SIZE)
+#define G_MC_QUEUE_SIZE(x) _SB_GETVALUE(x, S_MC_QUEUE_SIZE, M_MC_QUEUE_SIZE)
+#define V_MC_QUEUE_SIZE_DEFAULT V_MC_QUEUE_SIZE(0x0A)
+
+#define S_MC_AGE_LIMIT 44
+#define M_MC_AGE_LIMIT _SB_MAKEMASK(4, S_MC_AGE_LIMIT)
+#define V_MC_AGE_LIMIT(x) _SB_MAKEVALUE(x, S_MC_AGE_LIMIT)
+#define G_MC_AGE_LIMIT(x) _SB_GETVALUE(x, S_MC_AGE_LIMIT, M_MC_AGE_LIMIT)
+#define V_MC_AGE_LIMIT_DEFAULT V_MC_AGE_LIMIT(8)
+
+#define S_MC_WR_LIMIT 48
+#define M_MC_WR_LIMIT _SB_MAKEMASK(4, S_MC_WR_LIMIT)
+#define V_MC_WR_LIMIT(x) _SB_MAKEVALUE(x, S_MC_WR_LIMIT)
+#define G_MC_WR_LIMIT(x) _SB_GETVALUE(x, S_MC_WR_LIMIT, M_MC_WR_LIMIT)
+#define V_MC_WR_LIMIT_DEFAULT V_MC_WR_LIMIT(5)
+
+#define M_MC_IOB1HIGHPRIORITY _SB_MAKEMASK1(52)
+
+#define M_MC_RESERVED2 _SB_MAKEMASK(3, 53)
+
+#define S_MC_CS_MODE 56
+#define M_MC_CS_MODE _SB_MAKEMASK(4, S_MC_CS_MODE)
+#define V_MC_CS_MODE(x) _SB_MAKEVALUE(x, S_MC_CS_MODE)
+#define G_MC_CS_MODE(x) _SB_GETVALUE(x, S_MC_CS_MODE, M_MC_CS_MODE)
+
+#define K_MC_CS_MODE_MSB_CS 0
+#define K_MC_CS_MODE_INTLV_CS 15
+#define K_MC_CS_MODE_MIXED_CS_10 12
+#define K_MC_CS_MODE_MIXED_CS_30 6
+#define K_MC_CS_MODE_MIXED_CS_32 3
+
+#define V_MC_CS_MODE_MSB_CS V_MC_CS_MODE(K_MC_CS_MODE_MSB_CS)
+#define V_MC_CS_MODE_INTLV_CS V_MC_CS_MODE(K_MC_CS_MODE_INTLV_CS)
+#define V_MC_CS_MODE_MIXED_CS_10 V_MC_CS_MODE(K_MC_CS_MODE_MIXED_CS_10)
+#define V_MC_CS_MODE_MIXED_CS_30 V_MC_CS_MODE(K_MC_CS_MODE_MIXED_CS_30)
+#define V_MC_CS_MODE_MIXED_CS_32 V_MC_CS_MODE(K_MC_CS_MODE_MIXED_CS_32)
+
+#define M_MC_ECC_DISABLE _SB_MAKEMASK1(60)
+#define M_MC_BERR_DISABLE _SB_MAKEMASK1(61)
+#define M_MC_FORCE_SEQ _SB_MAKEMASK1(62)
+#define M_MC_DEBUG _SB_MAKEMASK1(63)
+
+#define V_MC_CONFIG_DEFAULT V_MC_WR_LIMIT_DEFAULT | V_MC_AGE_LIMIT_DEFAULT | \
+ V_MC_BANK0_MAP_DEFAULT | V_MC_BANK1_MAP_DEFAULT | \
+ V_MC_BANK2_MAP_DEFAULT | V_MC_BANK3_MAP_DEFAULT | V_MC_CHANNEL_SEL(0) | \
+ M_MC_IOB1HIGHPRIORITY | V_MC_QUEUE_SIZE_DEFAULT
+
+
+/*
+ * Memory clock config register (Table 6-15)
+ *
+ * Note: this field has been updated to be consistent with the errata to 0.2
+ */
+
+#define S_MC_CLK_RATIO 0
+#define M_MC_CLK_RATIO _SB_MAKEMASK(4, S_MC_CLK_RATIO)
+#define V_MC_CLK_RATIO(x) _SB_MAKEVALUE(x, S_MC_CLK_RATIO)
+#define G_MC_CLK_RATIO(x) _SB_GETVALUE(x, S_MC_CLK_RATIO, M_MC_CLK_RATIO)
+
+#define K_MC_CLK_RATIO_2X 4
+#define K_MC_CLK_RATIO_25X 5
+#define K_MC_CLK_RATIO_3X 6
+#define K_MC_CLK_RATIO_35X 7
+#define K_MC_CLK_RATIO_4X 8
+#define K_MC_CLK_RATIO_45X 9
+
+#define V_MC_CLK_RATIO_2X V_MC_CLK_RATIO(K_MC_CLK_RATIO_2X)
+#define V_MC_CLK_RATIO_25X V_MC_CLK_RATIO(K_MC_CLK_RATIO_25X)
+#define V_MC_CLK_RATIO_3X V_MC_CLK_RATIO(K_MC_CLK_RATIO_3X)
+#define V_MC_CLK_RATIO_35X V_MC_CLK_RATIO(K_MC_CLK_RATIO_35X)
+#define V_MC_CLK_RATIO_4X V_MC_CLK_RATIO(K_MC_CLK_RATIO_4X)
+#define V_MC_CLK_RATIO_45X V_MC_CLK_RATIO(K_MC_CLK_RATIO_45X)
+#define V_MC_CLK_RATIO_DEFAULT V_MC_CLK_RATIO_25X
+
+#define S_MC_REF_RATE 8
+#define M_MC_REF_RATE _SB_MAKEMASK(8, S_MC_REF_RATE)
+#define V_MC_REF_RATE(x) _SB_MAKEVALUE(x, S_MC_REF_RATE)
+#define G_MC_REF_RATE(x) _SB_GETVALUE(x, S_MC_REF_RATE, M_MC_REF_RATE)
+
+#define K_MC_REF_RATE_100MHz 0x62
+#define K_MC_REF_RATE_133MHz 0x81
+#define K_MC_REF_RATE_200MHz 0xC4
+
+#define V_MC_REF_RATE_100MHz V_MC_REF_RATE(K_MC_REF_RATE_100MHz)
+#define V_MC_REF_RATE_133MHz V_MC_REF_RATE(K_MC_REF_RATE_133MHz)
+#define V_MC_REF_RATE_200MHz V_MC_REF_RATE(K_MC_REF_RATE_200MHz)
+#define V_MC_REF_RATE_DEFAULT V_MC_REF_RATE_100MHz
+
+#define S_MC_CLOCK_DRIVE 16
+#define M_MC_CLOCK_DRIVE _SB_MAKEMASK(4, S_MC_CLOCK_DRIVE)
+#define V_MC_CLOCK_DRIVE(x) _SB_MAKEVALUE(x, S_MC_CLOCK_DRIVE)
+#define G_MC_CLOCK_DRIVE(x) _SB_GETVALUE(x, S_MC_CLOCK_DRIVE, M_MC_CLOCK_DRIVE)
+#define V_MC_CLOCK_DRIVE_DEFAULT V_MC_CLOCK_DRIVE(0xF)
+
+#define S_MC_DATA_DRIVE 20
+#define M_MC_DATA_DRIVE _SB_MAKEMASK(4, S_MC_DATA_DRIVE)
+#define V_MC_DATA_DRIVE(x) _SB_MAKEVALUE(x, S_MC_DATA_DRIVE)
+#define G_MC_DATA_DRIVE(x) _SB_GETVALUE(x, S_MC_DATA_DRIVE, M_MC_DATA_DRIVE)
+#define V_MC_DATA_DRIVE_DEFAULT V_MC_DATA_DRIVE(0x0)
+
+#define S_MC_ADDR_DRIVE 24
+#define M_MC_ADDR_DRIVE _SB_MAKEMASK(4, S_MC_ADDR_DRIVE)
+#define V_MC_ADDR_DRIVE(x) _SB_MAKEVALUE(x, S_MC_ADDR_DRIVE)
+#define G_MC_ADDR_DRIVE(x) _SB_GETVALUE(x, S_MC_ADDR_DRIVE, M_MC_ADDR_DRIVE)
+#define V_MC_ADDR_DRIVE_DEFAULT V_MC_ADDR_DRIVE(0x0)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_MC_REF_DISABLE _SB_MAKEMASK1(30)
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+#define M_MC_DLL_BYPASS _SB_MAKEMASK1(31)
+
+#define S_MC_DQI_SKEW 32
+#define M_MC_DQI_SKEW _SB_MAKEMASK(8, S_MC_DQI_SKEW)
+#define V_MC_DQI_SKEW(x) _SB_MAKEVALUE(x, S_MC_DQI_SKEW)
+#define G_MC_DQI_SKEW(x) _SB_GETVALUE(x, S_MC_DQI_SKEW, M_MC_DQI_SKEW)
+#define V_MC_DQI_SKEW_DEFAULT V_MC_DQI_SKEW(0)
+
+#define S_MC_DQO_SKEW 40
+#define M_MC_DQO_SKEW _SB_MAKEMASK(8, S_MC_DQO_SKEW)
+#define V_MC_DQO_SKEW(x) _SB_MAKEVALUE(x, S_MC_DQO_SKEW)
+#define G_MC_DQO_SKEW(x) _SB_GETVALUE(x, S_MC_DQO_SKEW, M_MC_DQO_SKEW)
+#define V_MC_DQO_SKEW_DEFAULT V_MC_DQO_SKEW(0)
+
+#define S_MC_ADDR_SKEW 48
+#define M_MC_ADDR_SKEW _SB_MAKEMASK(8, S_MC_ADDR_SKEW)
+#define V_MC_ADDR_SKEW(x) _SB_MAKEVALUE(x, S_MC_ADDR_SKEW)
+#define G_MC_ADDR_SKEW(x) _SB_GETVALUE(x, S_MC_ADDR_SKEW, M_MC_ADDR_SKEW)
+#define V_MC_ADDR_SKEW_DEFAULT V_MC_ADDR_SKEW(0x0F)
+
+#define S_MC_DLL_DEFAULT 56
+#define M_MC_DLL_DEFAULT _SB_MAKEMASK(8, S_MC_DLL_DEFAULT)
+#define V_MC_DLL_DEFAULT(x) _SB_MAKEVALUE(x, S_MC_DLL_DEFAULT)
+#define G_MC_DLL_DEFAULT(x) _SB_GETVALUE(x, S_MC_DLL_DEFAULT, M_MC_DLL_DEFAULT)
+#define V_MC_DLL_DEFAULT_DEFAULT V_MC_DLL_DEFAULT(0x10)
+
+#define V_MC_CLKCONFIG_DEFAULT V_MC_DLL_DEFAULT_DEFAULT | \
+ V_MC_ADDR_SKEW_DEFAULT | \
+ V_MC_DQO_SKEW_DEFAULT | \
+ V_MC_DQI_SKEW_DEFAULT | \
+ V_MC_ADDR_DRIVE_DEFAULT | \
+ V_MC_DATA_DRIVE_DEFAULT | \
+ V_MC_CLOCK_DRIVE_DEFAULT | \
+ V_MC_REF_RATE_DEFAULT
+
+
+
+/*
+ * DRAM Command Register (Table 6-13)
+ */
+
+#define S_MC_COMMAND 0
+#define M_MC_COMMAND _SB_MAKEMASK(4, S_MC_COMMAND)
+#define V_MC_COMMAND(x) _SB_MAKEVALUE(x, S_MC_COMMAND)
+#define G_MC_COMMAND(x) _SB_GETVALUE(x, S_MC_COMMAND, M_MC_COMMAND)
+
+#define K_MC_COMMAND_EMRS 0
+#define K_MC_COMMAND_MRS 1
+#define K_MC_COMMAND_PRE 2
+#define K_MC_COMMAND_AR 3
+#define K_MC_COMMAND_SETRFSH 4
+#define K_MC_COMMAND_CLRRFSH 5
+#define K_MC_COMMAND_SETPWRDN 6
+#define K_MC_COMMAND_CLRPWRDN 7
+
+#define V_MC_COMMAND_EMRS V_MC_COMMAND(K_MC_COMMAND_EMRS)
+#define V_MC_COMMAND_MRS V_MC_COMMAND(K_MC_COMMAND_MRS)
+#define V_MC_COMMAND_PRE V_MC_COMMAND(K_MC_COMMAND_PRE)
+#define V_MC_COMMAND_AR V_MC_COMMAND(K_MC_COMMAND_AR)
+#define V_MC_COMMAND_SETRFSH V_MC_COMMAND(K_MC_COMMAND_SETRFSH)
+#define V_MC_COMMAND_CLRRFSH V_MC_COMMAND(K_MC_COMMAND_CLRRFSH)
+#define V_MC_COMMAND_SETPWRDN V_MC_COMMAND(K_MC_COMMAND_SETPWRDN)
+#define V_MC_COMMAND_CLRPWRDN V_MC_COMMAND(K_MC_COMMAND_CLRPWRDN)
+
+#define M_MC_CS0 _SB_MAKEMASK1(4)
+#define M_MC_CS1 _SB_MAKEMASK1(5)
+#define M_MC_CS2 _SB_MAKEMASK1(6)
+#define M_MC_CS3 _SB_MAKEMASK1(7)
+
+/*
+ * DRAM Mode Register (Table 6-14)
+ */
+
+#define S_MC_EMODE 0
+#define M_MC_EMODE _SB_MAKEMASK(15, S_MC_EMODE)
+#define V_MC_EMODE(x) _SB_MAKEVALUE(x, S_MC_EMODE)
+#define G_MC_EMODE(x) _SB_GETVALUE(x, S_MC_EMODE, M_MC_EMODE)
+#define V_MC_EMODE_DEFAULT V_MC_EMODE(0)
+
+#define S_MC_MODE 16
+#define M_MC_MODE _SB_MAKEMASK(15, S_MC_MODE)
+#define V_MC_MODE(x) _SB_MAKEVALUE(x, S_MC_MODE)
+#define G_MC_MODE(x) _SB_GETVALUE(x, S_MC_MODE, M_MC_MODE)
+#define V_MC_MODE_DEFAULT V_MC_MODE(0x22)
+
+#define S_MC_DRAM_TYPE 32
+#define M_MC_DRAM_TYPE _SB_MAKEMASK(3, S_MC_DRAM_TYPE)
+#define V_MC_DRAM_TYPE(x) _SB_MAKEVALUE(x, S_MC_DRAM_TYPE)
+#define G_MC_DRAM_TYPE(x) _SB_GETVALUE(x, S_MC_DRAM_TYPE, M_MC_DRAM_TYPE)
+
+#define K_MC_DRAM_TYPE_JEDEC 0
+#define K_MC_DRAM_TYPE_FCRAM 1
+#define K_MC_DRAM_TYPE_SGRAM 2
+
+#define V_MC_DRAM_TYPE_JEDEC V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_JEDEC)
+#define V_MC_DRAM_TYPE_FCRAM V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_FCRAM)
+#define V_MC_DRAM_TYPE_SGRAM V_MC_DRAM_TYPE(K_MC_DRAM_TYPE_SGRAM)
+
+#define M_MC_EXTERNALDECODE _SB_MAKEMASK1(35)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_MC_PRE_ON_A8 _SB_MAKEMASK1(36)
+#define M_MC_RAM_WITH_A13 _SB_MAKEMASK1(37)
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+
+
+/*
+ * SDRAM Timing Register (Table 6-15)
+ */
+
+#define M_MC_w2rIDLE_TWOCYCLES _SB_MAKEMASK1(60)
+#define M_MC_r2wIDLE_TWOCYCLES _SB_MAKEMASK1(61)
+#define M_MC_r2rIDLE_TWOCYCLES _SB_MAKEMASK1(62)
+
+#define S_MC_tFIFO 56
+#define M_MC_tFIFO _SB_MAKEMASK(4, S_MC_tFIFO)
+#define V_MC_tFIFO(x) _SB_MAKEVALUE(x, S_MC_tFIFO)
+#define G_MC_tFIFO(x) _SB_GETVALUE(x, S_MC_tFIFO, M_MC_tFIFO)
+#define K_MC_tFIFO_DEFAULT 1
+#define V_MC_tFIFO_DEFAULT V_MC_tFIFO(K_MC_tFIFO_DEFAULT)
+
+#define S_MC_tRFC 52
+#define M_MC_tRFC _SB_MAKEMASK(4, S_MC_tRFC)
+#define V_MC_tRFC(x) _SB_MAKEVALUE(x, S_MC_tRFC)
+#define G_MC_tRFC(x) _SB_GETVALUE(x, S_MC_tRFC, M_MC_tRFC)
+#define K_MC_tRFC_DEFAULT 12
+#define V_MC_tRFC_DEFAULT V_MC_tRFC(K_MC_tRFC_DEFAULT)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3)
+#define M_MC_tRFC_PLUS16 _SB_MAKEMASK1(51) /* 1250C3 and later. */
+#endif
+
+#define S_MC_tCwCr 40
+#define M_MC_tCwCr _SB_MAKEMASK(4, S_MC_tCwCr)
+#define V_MC_tCwCr(x) _SB_MAKEVALUE(x, S_MC_tCwCr)
+#define G_MC_tCwCr(x) _SB_GETVALUE(x, S_MC_tCwCr, M_MC_tCwCr)
+#define K_MC_tCwCr_DEFAULT 4
+#define V_MC_tCwCr_DEFAULT V_MC_tCwCr(K_MC_tCwCr_DEFAULT)
+
+#define S_MC_tRCr 28
+#define M_MC_tRCr _SB_MAKEMASK(4, S_MC_tRCr)
+#define V_MC_tRCr(x) _SB_MAKEVALUE(x, S_MC_tRCr)
+#define G_MC_tRCr(x) _SB_GETVALUE(x, S_MC_tRCr, M_MC_tRCr)
+#define K_MC_tRCr_DEFAULT 9
+#define V_MC_tRCr_DEFAULT V_MC_tRCr(K_MC_tRCr_DEFAULT)
+
+#define S_MC_tRCw 24
+#define M_MC_tRCw _SB_MAKEMASK(4, S_MC_tRCw)
+#define V_MC_tRCw(x) _SB_MAKEVALUE(x, S_MC_tRCw)
+#define G_MC_tRCw(x) _SB_GETVALUE(x, S_MC_tRCw, M_MC_tRCw)
+#define K_MC_tRCw_DEFAULT 10
+#define V_MC_tRCw_DEFAULT V_MC_tRCw(K_MC_tRCw_DEFAULT)
+
+#define S_MC_tRRD 20
+#define M_MC_tRRD _SB_MAKEMASK(4, S_MC_tRRD)
+#define V_MC_tRRD(x) _SB_MAKEVALUE(x, S_MC_tRRD)
+#define G_MC_tRRD(x) _SB_GETVALUE(x, S_MC_tRRD, M_MC_tRRD)
+#define K_MC_tRRD_DEFAULT 2
+#define V_MC_tRRD_DEFAULT V_MC_tRRD(K_MC_tRRD_DEFAULT)
+
+#define S_MC_tRP 16
+#define M_MC_tRP _SB_MAKEMASK(4, S_MC_tRP)
+#define V_MC_tRP(x) _SB_MAKEVALUE(x, S_MC_tRP)
+#define G_MC_tRP(x) _SB_GETVALUE(x, S_MC_tRP, M_MC_tRP)
+#define K_MC_tRP_DEFAULT 4
+#define V_MC_tRP_DEFAULT V_MC_tRP(K_MC_tRP_DEFAULT)
+
+#define S_MC_tCwD 8
+#define M_MC_tCwD _SB_MAKEMASK(4, S_MC_tCwD)
+#define V_MC_tCwD(x) _SB_MAKEVALUE(x, S_MC_tCwD)
+#define G_MC_tCwD(x) _SB_GETVALUE(x, S_MC_tCwD, M_MC_tCwD)
+#define K_MC_tCwD_DEFAULT 1
+#define V_MC_tCwD_DEFAULT V_MC_tCwD(K_MC_tCwD_DEFAULT)
+
+#define M_tCrDh _SB_MAKEMASK1(7)
+#define M_MC_tCrDh M_tCrDh
+
+#define S_MC_tCrD 4
+#define M_MC_tCrD _SB_MAKEMASK(3, S_MC_tCrD)
+#define V_MC_tCrD(x) _SB_MAKEVALUE(x, S_MC_tCrD)
+#define G_MC_tCrD(x) _SB_GETVALUE(x, S_MC_tCrD, M_MC_tCrD)
+#define K_MC_tCrD_DEFAULT 2
+#define V_MC_tCrD_DEFAULT V_MC_tCrD(K_MC_tCrD_DEFAULT)
+
+#define S_MC_tRCD 0
+#define M_MC_tRCD _SB_MAKEMASK(4, S_MC_tRCD)
+#define V_MC_tRCD(x) _SB_MAKEVALUE(x, S_MC_tRCD)
+#define G_MC_tRCD(x) _SB_GETVALUE(x, S_MC_tRCD, M_MC_tRCD)
+#define K_MC_tRCD_DEFAULT 3
+#define V_MC_tRCD_DEFAULT V_MC_tRCD(K_MC_tRCD_DEFAULT)
+
+#define V_MC_TIMING_DEFAULT V_MC_tFIFO(K_MC_tFIFO_DEFAULT) | \
+ V_MC_tRFC(K_MC_tRFC_DEFAULT) | \
+ V_MC_tCwCr(K_MC_tCwCr_DEFAULT) | \
+ V_MC_tRCr(K_MC_tRCr_DEFAULT) | \
+ V_MC_tRCw(K_MC_tRCw_DEFAULT) | \
+ V_MC_tRRD(K_MC_tRRD_DEFAULT) | \
+ V_MC_tRP(K_MC_tRP_DEFAULT) | \
+ V_MC_tCwD(K_MC_tCwD_DEFAULT) | \
+ V_MC_tCrD(K_MC_tCrD_DEFAULT) | \
+ V_MC_tRCD(K_MC_tRCD_DEFAULT) | \
+ M_MC_r2rIDLE_TWOCYCLES
+
+/*
+ * Errata says these are not the default
+ * M_MC_w2rIDLE_TWOCYCLES | \
+ * M_MC_r2wIDLE_TWOCYCLES | \
+ */
+
+
+/*
+ * Chip Select Start Address Register (Table 6-17)
+ */
+
+#define S_MC_CS0_START 0
+#define M_MC_CS0_START _SB_MAKEMASK(16, S_MC_CS0_START)
+#define V_MC_CS0_START(x) _SB_MAKEVALUE(x, S_MC_CS0_START)
+#define G_MC_CS0_START(x) _SB_GETVALUE(x, S_MC_CS0_START, M_MC_CS0_START)
+
+#define S_MC_CS1_START 16
+#define M_MC_CS1_START _SB_MAKEMASK(16, S_MC_CS1_START)
+#define V_MC_CS1_START(x) _SB_MAKEVALUE(x, S_MC_CS1_START)
+#define G_MC_CS1_START(x) _SB_GETVALUE(x, S_MC_CS1_START, M_MC_CS1_START)
+
+#define S_MC_CS2_START 32
+#define M_MC_CS2_START _SB_MAKEMASK(16, S_MC_CS2_START)
+#define V_MC_CS2_START(x) _SB_MAKEVALUE(x, S_MC_CS2_START)
+#define G_MC_CS2_START(x) _SB_GETVALUE(x, S_MC_CS2_START, M_MC_CS2_START)
+
+#define S_MC_CS3_START 48
+#define M_MC_CS3_START _SB_MAKEMASK(16, S_MC_CS3_START)
+#define V_MC_CS3_START(x) _SB_MAKEVALUE(x, S_MC_CS3_START)
+#define G_MC_CS3_START(x) _SB_GETVALUE(x, S_MC_CS3_START, M_MC_CS3_START)
+
+/*
+ * Chip Select End Address Register (Table 6-18)
+ */
+
+#define S_MC_CS0_END 0
+#define M_MC_CS0_END _SB_MAKEMASK(16, S_MC_CS0_END)
+#define V_MC_CS0_END(x) _SB_MAKEVALUE(x, S_MC_CS0_END)
+#define G_MC_CS0_END(x) _SB_GETVALUE(x, S_MC_CS0_END, M_MC_CS0_END)
+
+#define S_MC_CS1_END 16
+#define M_MC_CS1_END _SB_MAKEMASK(16, S_MC_CS1_END)
+#define V_MC_CS1_END(x) _SB_MAKEVALUE(x, S_MC_CS1_END)
+#define G_MC_CS1_END(x) _SB_GETVALUE(x, S_MC_CS1_END, M_MC_CS1_END)
+
+#define S_MC_CS2_END 32
+#define M_MC_CS2_END _SB_MAKEMASK(16, S_MC_CS2_END)
+#define V_MC_CS2_END(x) _SB_MAKEVALUE(x, S_MC_CS2_END)
+#define G_MC_CS2_END(x) _SB_GETVALUE(x, S_MC_CS2_END, M_MC_CS2_END)
+
+#define S_MC_CS3_END 48
+#define M_MC_CS3_END _SB_MAKEMASK(16, S_MC_CS3_END)
+#define V_MC_CS3_END(x) _SB_MAKEVALUE(x, S_MC_CS3_END)
+#define G_MC_CS3_END(x) _SB_GETVALUE(x, S_MC_CS3_END, M_MC_CS3_END)
+
+/*
+ * Chip Select Interleave Register (Table 6-19)
+ */
+
+#define S_MC_INTLV_RESERVED 0
+#define M_MC_INTLV_RESERVED _SB_MAKEMASK(5, S_MC_INTLV_RESERVED)
+
+#define S_MC_INTERLEAVE 7
+#define M_MC_INTERLEAVE _SB_MAKEMASK(18, S_MC_INTERLEAVE)
+#define V_MC_INTERLEAVE(x) _SB_MAKEVALUE(x, S_MC_INTERLEAVE)
+
+#define S_MC_INTLV_MBZ 25
+#define M_MC_INTLV_MBZ _SB_MAKEMASK(39, S_MC_INTLV_MBZ)
+
+/*
+ * Row Address Bits Register (Table 6-20)
+ */
+
+#define S_MC_RAS_RESERVED 0
+#define M_MC_RAS_RESERVED _SB_MAKEMASK(5, S_MC_RAS_RESERVED)
+
+#define S_MC_RAS_SELECT 12
+#define M_MC_RAS_SELECT _SB_MAKEMASK(25, S_MC_RAS_SELECT)
+#define V_MC_RAS_SELECT(x) _SB_MAKEVALUE(x, S_MC_RAS_SELECT)
+
+#define S_MC_RAS_MBZ 37
+#define M_MC_RAS_MBZ _SB_MAKEMASK(27, S_MC_RAS_MBZ)
+
+
+/*
+ * Column Address Bits Register (Table 6-21)
+ */
+
+#define S_MC_CAS_RESERVED 0
+#define M_MC_CAS_RESERVED _SB_MAKEMASK(5, S_MC_CAS_RESERVED)
+
+#define S_MC_CAS_SELECT 5
+#define M_MC_CAS_SELECT _SB_MAKEMASK(18, S_MC_CAS_SELECT)
+#define V_MC_CAS_SELECT(x) _SB_MAKEVALUE(x, S_MC_CAS_SELECT)
+
+#define S_MC_CAS_MBZ 23
+#define M_MC_CAS_MBZ _SB_MAKEMASK(41, S_MC_CAS_MBZ)
+
+
+/*
+ * Bank Address Address Bits Register (Table 6-22)
+ */
+
+#define S_MC_BA_RESERVED 0
+#define M_MC_BA_RESERVED _SB_MAKEMASK(5, S_MC_BA_RESERVED)
+
+#define S_MC_BA_SELECT 5
+#define M_MC_BA_SELECT _SB_MAKEMASK(20, S_MC_BA_SELECT)
+#define V_MC_BA_SELECT(x) _SB_MAKEVALUE(x, S_MC_BA_SELECT)
+
+#define S_MC_BA_MBZ 25
+#define M_MC_BA_MBZ _SB_MAKEMASK(39, S_MC_BA_MBZ)
+
+/*
+ * Chip Select Attribute Register (Table 6-23)
+ */
+
+#define K_MC_CS_ATTR_CLOSED 0
+#define K_MC_CS_ATTR_CASCHECK 1
+#define K_MC_CS_ATTR_HINT 2
+#define K_MC_CS_ATTR_OPEN 3
+
+#define S_MC_CS0_PAGE 0
+#define M_MC_CS0_PAGE _SB_MAKEMASK(2, S_MC_CS0_PAGE)
+#define V_MC_CS0_PAGE(x) _SB_MAKEVALUE(x, S_MC_CS0_PAGE)
+#define G_MC_CS0_PAGE(x) _SB_GETVALUE(x, S_MC_CS0_PAGE, M_MC_CS0_PAGE)
+
+#define S_MC_CS1_PAGE 16
+#define M_MC_CS1_PAGE _SB_MAKEMASK(2, S_MC_CS1_PAGE)
+#define V_MC_CS1_PAGE(x) _SB_MAKEVALUE(x, S_MC_CS1_PAGE)
+#define G_MC_CS1_PAGE(x) _SB_GETVALUE(x, S_MC_CS1_PAGE, M_MC_CS1_PAGE)
+
+#define S_MC_CS2_PAGE 32
+#define M_MC_CS2_PAGE _SB_MAKEMASK(2, S_MC_CS2_PAGE)
+#define V_MC_CS2_PAGE(x) _SB_MAKEVALUE(x, S_MC_CS2_PAGE)
+#define G_MC_CS2_PAGE(x) _SB_GETVALUE(x, S_MC_CS2_PAGE, M_MC_CS2_PAGE)
+
+#define S_MC_CS3_PAGE 48
+#define M_MC_CS3_PAGE _SB_MAKEMASK(2, S_MC_CS3_PAGE)
+#define V_MC_CS3_PAGE(x) _SB_MAKEVALUE(x, S_MC_CS3_PAGE)
+#define G_MC_CS3_PAGE(x) _SB_GETVALUE(x, S_MC_CS3_PAGE, M_MC_CS3_PAGE)
+
+/*
+ * ECC Test ECC Register (Table 6-25)
+ */
+
+#define S_MC_ECC_INVERT 0
+#define M_MC_ECC_INVERT _SB_MAKEMASK(8, S_MC_ECC_INVERT)
+
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_regs.h b/arch/mips/include/asm/sibyte/sb1250_regs.h
new file mode 100644
index 00000000000..8f53ec817a5
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_regs.h
@@ -0,0 +1,893 @@
+/* *********************************************************************
+ * SB1250 Board Support Package
+ *
+ * Register Definitions File: sb1250_regs.h
+ *
+ * This module contains the addresses of the on-chip peripherals
+ * on the SB1250.
+ *
+ * SB1250 specification level: 01/02/2002
+ *
+ *********************************************************************
+ *
+ * Copyright 2000,2001,2002,2003
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+
+#ifndef _SB1250_REGS_H
+#define _SB1250_REGS_H
+
+#include "sb1250_defs.h"
+
+
+/* *********************************************************************
+ * Some general notes:
+ *
+ * For the most part, when there is more than one peripheral
+ * of the same type on the SOC, the constants below will be
+ * offsets from the base of each peripheral. For example,
+ * the MAC registers are described as offsets from the first
+ * MAC register, and there will be a MAC_REGISTER() macro
+ * to calculate the base address of a given MAC.
+ *
+ * The information in this file is based on the SB1250 SOC
+ * manual version 0.2, July 2000.
+ ********************************************************************* */
+
+
+/* *********************************************************************
+ * Memory Controller Registers
+ ********************************************************************* */
+
+/*
+ * XXX: can't remove MC base 0 if 112x, since it's used by other macros,
+ * since there is one reg there (but it could get its addr/offset constant).
+ */
+
+#if SIBYTE_HDR_FEATURE_1250_112x /* This MC only on 1250 & 112x */
+#define A_MC_BASE_0 0x0010051000
+#define A_MC_BASE_1 0x0010052000
+#define MC_REGISTER_SPACING 0x1000
+
+#define A_MC_BASE(ctlid) ((ctlid)*MC_REGISTER_SPACING+A_MC_BASE_0)
+#define A_MC_REGISTER(ctlid, reg) (A_MC_BASE(ctlid)+(reg))
+
+#define R_MC_CONFIG 0x0000000100
+#define R_MC_DRAMCMD 0x0000000120
+#define R_MC_DRAMMODE 0x0000000140
+#define R_MC_TIMING1 0x0000000160
+#define R_MC_TIMING2 0x0000000180
+#define R_MC_CS_START 0x00000001A0
+#define R_MC_CS_END 0x00000001C0
+#define R_MC_CS_INTERLEAVE 0x00000001E0
+#define S_MC_CS_STARTEND 16
+
+#define R_MC_CSX_BASE 0x0000000200
+#define R_MC_CSX_ROW 0x0000000000 /* relative to CSX_BASE, above */
+#define R_MC_CSX_COL 0x0000000020 /* relative to CSX_BASE, above */
+#define R_MC_CSX_BA 0x0000000040 /* relative to CSX_BASE, above */
+#define MC_CSX_SPACING 0x0000000060 /* relative to CSX_BASE, above */
+
+#define R_MC_CS0_ROW 0x0000000200
+#define R_MC_CS0_COL 0x0000000220
+#define R_MC_CS0_BA 0x0000000240
+#define R_MC_CS1_ROW 0x0000000260
+#define R_MC_CS1_COL 0x0000000280
+#define R_MC_CS1_BA 0x00000002A0
+#define R_MC_CS2_ROW 0x00000002C0
+#define R_MC_CS2_COL 0x00000002E0
+#define R_MC_CS2_BA 0x0000000300
+#define R_MC_CS3_ROW 0x0000000320
+#define R_MC_CS3_COL 0x0000000340
+#define R_MC_CS3_BA 0x0000000360
+#define R_MC_CS_ATTR 0x0000000380
+#define R_MC_TEST_DATA 0x0000000400
+#define R_MC_TEST_ECC 0x0000000420
+#define R_MC_MCLK_CFG 0x0000000500
+
+#endif /* 1250 & 112x */
+
+/* *********************************************************************
+ * L2 Cache Control Registers
+ ********************************************************************* */
+
+#if SIBYTE_HDR_FEATURE_1250_112x /* This L2C only on 1250/112x */
+
+#define A_L2_READ_TAG 0x0010040018
+#define A_L2_ECC_TAG 0x0010040038
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define A_L2_READ_MISC 0x0010040058
+#endif /* 1250 PASS3 || 112x PASS1 */
+#define A_L2_WAY_DISABLE 0x0010041000
+#define A_L2_MAKEDISABLE(x) (A_L2_WAY_DISABLE | (((~(x))&0x0F) << 8))
+#define A_L2_MGMT_TAG_BASE 0x00D0000000
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define A_L2_CACHE_DISABLE 0x0010042000
+#define A_L2_MAKECACHEDISABLE(x) (A_L2_CACHE_DISABLE | (((x)&0x0F) << 8))
+#define A_L2_MISC_CONFIG 0x0010043000
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+/* Backward-compatibility definitions. */
+/* XXX: discourage people from using these constants. */
+#define A_L2_READ_ADDRESS A_L2_READ_TAG
+#define A_L2_EEC_ADDRESS A_L2_ECC_TAG
+
+#endif
+
+
+/* *********************************************************************
+ * PCI Interface Registers
+ ********************************************************************* */
+
+#if SIBYTE_HDR_FEATURE_1250_112x /* This PCI/HT only on 1250/112x */
+#define A_PCI_TYPE00_HEADER 0x00DE000000
+#define A_PCI_TYPE01_HEADER 0x00DE000800
+#endif
+
+
+/* *********************************************************************
+ * Ethernet DMA and MACs
+ ********************************************************************* */
+
+#define A_MAC_BASE_0 0x0010064000
+#define A_MAC_BASE_1 0x0010065000
+#if SIBYTE_HDR_FEATURE_CHIP(1250)
+#define A_MAC_BASE_2 0x0010066000
+#endif /* 1250 */
+
+#define MAC_SPACING 0x1000
+#define MAC_DMA_TXRX_SPACING 0x0400
+#define MAC_DMA_CHANNEL_SPACING 0x0100
+#define DMA_RX 0
+#define DMA_TX 1
+#define MAC_NUM_DMACHAN 2 /* channels per direction */
+
+/* XXX: not correct; depends on SOC type. */
+#define MAC_NUM_PORTS 3
+
+#define A_MAC_CHANNEL_BASE(macnum) \
+ (A_MAC_BASE_0 + \
+ MAC_SPACING*(macnum))
+
+#define A_MAC_REGISTER(macnum,reg) \
+ (A_MAC_BASE_0 + \
+ MAC_SPACING*(macnum) + (reg))
+
+
+#define R_MAC_DMA_CHANNELS 0x800 /* Relative to A_MAC_CHANNEL_BASE */
+
+#define A_MAC_DMA_CHANNEL_BASE(macnum, txrx, chan) \
+ ((A_MAC_CHANNEL_BASE(macnum)) + \
+ R_MAC_DMA_CHANNELS + \
+ (MAC_DMA_TXRX_SPACING*(txrx)) + \
+ (MAC_DMA_CHANNEL_SPACING*(chan)))
+
+#define R_MAC_DMA_CHANNEL_BASE(txrx, chan) \
+ (R_MAC_DMA_CHANNELS + \
+ (MAC_DMA_TXRX_SPACING*(txrx)) + \
+ (MAC_DMA_CHANNEL_SPACING*(chan)))
+
+#define A_MAC_DMA_REGISTER(macnum, txrx, chan, reg) \
+ (A_MAC_DMA_CHANNEL_BASE(macnum, txrx, chan) + \
+ (reg))
+
+#define R_MAC_DMA_REGISTER(txrx, chan, reg) \
+ (R_MAC_DMA_CHANNEL_BASE(txrx, chan) + \
+ (reg))
+
+/*
+ * DMA channel registers, relative to A_MAC_DMA_CHANNEL_BASE
+ */
+
+#define R_MAC_DMA_CONFIG0 0x00000000
+#define R_MAC_DMA_CONFIG1 0x00000008
+#define R_MAC_DMA_DSCR_BASE 0x00000010
+#define R_MAC_DMA_DSCR_CNT 0x00000018
+#define R_MAC_DMA_CUR_DSCRA 0x00000020
+#define R_MAC_DMA_CUR_DSCRB 0x00000028
+#define R_MAC_DMA_CUR_DSCRADDR 0x00000030
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define R_MAC_DMA_OODPKTLOST_RX 0x00000038 /* rx only */
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+/*
+ * RMON Counters
+ */
+
+#define R_MAC_RMON_TX_BYTES 0x00000000
+#define R_MAC_RMON_COLLISIONS 0x00000008
+#define R_MAC_RMON_LATE_COL 0x00000010
+#define R_MAC_RMON_EX_COL 0x00000018
+#define R_MAC_RMON_FCS_ERROR 0x00000020
+#define R_MAC_RMON_TX_ABORT 0x00000028
+/* Counter #6 (0x30) now reserved */
+#define R_MAC_RMON_TX_BAD 0x00000038
+#define R_MAC_RMON_TX_GOOD 0x00000040
+#define R_MAC_RMON_TX_RUNT 0x00000048
+#define R_MAC_RMON_TX_OVERSIZE 0x00000050
+#define R_MAC_RMON_RX_BYTES 0x00000080
+#define R_MAC_RMON_RX_MCAST 0x00000088
+#define R_MAC_RMON_RX_BCAST 0x00000090
+#define R_MAC_RMON_RX_BAD 0x00000098
+#define R_MAC_RMON_RX_GOOD 0x000000A0
+#define R_MAC_RMON_RX_RUNT 0x000000A8
+#define R_MAC_RMON_RX_OVERSIZE 0x000000B0
+#define R_MAC_RMON_RX_FCS_ERROR 0x000000B8
+#define R_MAC_RMON_RX_LENGTH_ERROR 0x000000C0
+#define R_MAC_RMON_RX_CODE_ERROR 0x000000C8
+#define R_MAC_RMON_RX_ALIGN_ERROR 0x000000D0
+
+/* Updated to spec 0.2 */
+#define R_MAC_CFG 0x00000100
+#define R_MAC_THRSH_CFG 0x00000108
+#define R_MAC_VLANTAG 0x00000110
+#define R_MAC_FRAMECFG 0x00000118
+#define R_MAC_EOPCNT 0x00000120
+#define R_MAC_FIFO_PTRS 0x00000128
+#define R_MAC_ADFILTER_CFG 0x00000200
+#define R_MAC_ETHERNET_ADDR 0x00000208
+#define R_MAC_PKT_TYPE 0x00000210
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define R_MAC_ADMASK0 0x00000218
+#define R_MAC_ADMASK1 0x00000220
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+#define R_MAC_HASH_BASE 0x00000240
+#define R_MAC_ADDR_BASE 0x00000280
+#define R_MAC_CHLO0_BASE 0x00000300
+#define R_MAC_CHUP0_BASE 0x00000320
+#define R_MAC_ENABLE 0x00000400
+#define R_MAC_STATUS 0x00000408
+#define R_MAC_INT_MASK 0x00000410
+#define R_MAC_TXD_CTL 0x00000420
+#define R_MAC_MDIO 0x00000428
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define R_MAC_STATUS1 0x00000430
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+#define R_MAC_DEBUG_STATUS 0x00000448
+
+#define MAC_HASH_COUNT 8
+#define MAC_ADDR_COUNT 8
+#define MAC_CHMAP_COUNT 4
+
+
+/* *********************************************************************
+ * DUART Registers
+ ********************************************************************* */
+
+
+#if SIBYTE_HDR_FEATURE_1250_112x /* This MC only on 1250 & 112x */
+#define R_DUART_NUM_PORTS 2
+
+#define A_DUART 0x0010060000
+
+#define DUART_CHANREG_SPACING 0x100
+
+#define A_DUART_CHANREG(chan, reg) \
+ (A_DUART + DUART_CHANREG_SPACING * ((chan) + 1) + (reg))
+#endif /* 1250 & 112x */
+
+#define R_DUART_MODE_REG_1 0x000
+#define R_DUART_MODE_REG_2 0x010
+#define R_DUART_STATUS 0x020
+#define R_DUART_CLK_SEL 0x030
+#define R_DUART_CMD 0x050
+#define R_DUART_RX_HOLD 0x060
+#define R_DUART_TX_HOLD 0x070
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define R_DUART_FULL_CTL 0x040
+#define R_DUART_OPCR_X 0x080
+#define R_DUART_AUXCTL_X 0x090
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+
+/*
+ * The IMR and ISR can't be addressed with A_DUART_CHANREG,
+ * so use these macros instead.
+ */
+
+#if SIBYTE_HDR_FEATURE_1250_112x /* This MC only on 1250 & 112x */
+#define DUART_IMRISR_SPACING 0x20
+#define DUART_INCHNG_SPACING 0x10
+
+#define A_DUART_CTRLREG(reg) \
+ (A_DUART + DUART_CHANREG_SPACING * 3 + (reg))
+
+#define R_DUART_IMRREG(chan) \
+ (R_DUART_IMR_A + (chan) * DUART_IMRISR_SPACING)
+#define R_DUART_ISRREG(chan) \
+ (R_DUART_ISR_A + (chan) * DUART_IMRISR_SPACING)
+#define R_DUART_INCHREG(chan) \
+ (R_DUART_IN_CHNG_A + (chan) * DUART_INCHNG_SPACING)
+
+#define A_DUART_IMRREG(chan) A_DUART_CTRLREG(R_DUART_IMRREG(chan))
+#define A_DUART_ISRREG(chan) A_DUART_CTRLREG(R_DUART_ISRREG(chan))
+#define A_DUART_INCHREG(chan) A_DUART_CTRLREG(R_DUART_INCHREG(chan))
+#endif /* 1250 & 112x */
+
+#define R_DUART_AUX_CTRL 0x010
+#define R_DUART_ISR_A 0x020
+#define R_DUART_IMR_A 0x030
+#define R_DUART_ISR_B 0x040
+#define R_DUART_IMR_B 0x050
+#define R_DUART_OUT_PORT 0x060
+#define R_DUART_OPCR 0x070
+#define R_DUART_IN_PORT 0x080
+
+#define R_DUART_SET_OPR 0x0B0
+#define R_DUART_CLEAR_OPR 0x0C0
+#define R_DUART_IN_CHNG_A 0x0D0
+#define R_DUART_IN_CHNG_B 0x0E0
+
+
+/*
+ * These constants are the absolute addresses.
+ */
+
+#define A_DUART_MODE_REG_1_A 0x0010060100
+#define A_DUART_MODE_REG_2_A 0x0010060110
+#define A_DUART_STATUS_A 0x0010060120
+#define A_DUART_CLK_SEL_A 0x0010060130
+#define A_DUART_CMD_A 0x0010060150
+#define A_DUART_RX_HOLD_A 0x0010060160
+#define A_DUART_TX_HOLD_A 0x0010060170
+
+#define A_DUART_MODE_REG_1_B 0x0010060200
+#define A_DUART_MODE_REG_2_B 0x0010060210
+#define A_DUART_STATUS_B 0x0010060220
+#define A_DUART_CLK_SEL_B 0x0010060230
+#define A_DUART_CMD_B 0x0010060250
+#define A_DUART_RX_HOLD_B 0x0010060260
+#define A_DUART_TX_HOLD_B 0x0010060270
+
+#define A_DUART_INPORT_CHNG 0x0010060300
+#define A_DUART_AUX_CTRL 0x0010060310
+#define A_DUART_ISR_A 0x0010060320
+#define A_DUART_IMR_A 0x0010060330
+#define A_DUART_ISR_B 0x0010060340
+#define A_DUART_IMR_B 0x0010060350
+#define A_DUART_OUT_PORT 0x0010060360
+#define A_DUART_OPCR 0x0010060370
+#define A_DUART_IN_PORT 0x0010060380
+#define A_DUART_ISR 0x0010060390
+#define A_DUART_IMR 0x00100603A0
+#define A_DUART_SET_OPR 0x00100603B0
+#define A_DUART_CLEAR_OPR 0x00100603C0
+#define A_DUART_INPORT_CHNG_A 0x00100603D0
+#define A_DUART_INPORT_CHNG_B 0x00100603E0
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define A_DUART_FULL_CTL_A 0x0010060140
+#define A_DUART_FULL_CTL_B 0x0010060240
+
+#define A_DUART_OPCR_A 0x0010060180
+#define A_DUART_OPCR_B 0x0010060280
+
+#define A_DUART_INPORT_CHNG_DEBUG 0x00100603F0
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+
+/* *********************************************************************
+ * Synchronous Serial Registers
+ ********************************************************************* */
+
+
+#if SIBYTE_HDR_FEATURE_1250_112x /* sync serial only on 1250/112x */
+
+#define A_SER_BASE_0 0x0010060400
+#define A_SER_BASE_1 0x0010060800
+#define SER_SPACING 0x400
+
+#define SER_DMA_TXRX_SPACING 0x80
+
+#define SER_NUM_PORTS 2
+
+#define A_SER_CHANNEL_BASE(sernum) \
+ (A_SER_BASE_0 + \
+ SER_SPACING*(sernum))
+
+#define A_SER_REGISTER(sernum,reg) \
+ (A_SER_BASE_0 + \
+ SER_SPACING*(sernum) + (reg))
+
+
+#define R_SER_DMA_CHANNELS 0 /* Relative to A_SER_BASE_x */
+
+#define A_SER_DMA_CHANNEL_BASE(sernum,txrx) \
+ ((A_SER_CHANNEL_BASE(sernum)) + \
+ R_SER_DMA_CHANNELS + \
+ (SER_DMA_TXRX_SPACING*(txrx)))
+
+#define A_SER_DMA_REGISTER(sernum, txrx, reg) \
+ (A_SER_DMA_CHANNEL_BASE(sernum, txrx) + \
+ (reg))
+
+
+/*
+ * DMA channel registers, relative to A_SER_DMA_CHANNEL_BASE
+ */
+
+#define R_SER_DMA_CONFIG0 0x00000000
+#define R_SER_DMA_CONFIG1 0x00000008
+#define R_SER_DMA_DSCR_BASE 0x00000010
+#define R_SER_DMA_DSCR_CNT 0x00000018
+#define R_SER_DMA_CUR_DSCRA 0x00000020
+#define R_SER_DMA_CUR_DSCRB 0x00000028
+#define R_SER_DMA_CUR_DSCRADDR 0x00000030
+
+#define R_SER_DMA_CONFIG0_RX 0x00000000
+#define R_SER_DMA_CONFIG1_RX 0x00000008
+#define R_SER_DMA_DSCR_BASE_RX 0x00000010
+#define R_SER_DMA_DSCR_COUNT_RX 0x00000018
+#define R_SER_DMA_CUR_DSCR_A_RX 0x00000020
+#define R_SER_DMA_CUR_DSCR_B_RX 0x00000028
+#define R_SER_DMA_CUR_DSCR_ADDR_RX 0x00000030
+
+#define R_SER_DMA_CONFIG0_TX 0x00000080
+#define R_SER_DMA_CONFIG1_TX 0x00000088
+#define R_SER_DMA_DSCR_BASE_TX 0x00000090
+#define R_SER_DMA_DSCR_COUNT_TX 0x00000098
+#define R_SER_DMA_CUR_DSCR_A_TX 0x000000A0
+#define R_SER_DMA_CUR_DSCR_B_TX 0x000000A8
+#define R_SER_DMA_CUR_DSCR_ADDR_TX 0x000000B0
+
+#define R_SER_MODE 0x00000100
+#define R_SER_MINFRM_SZ 0x00000108
+#define R_SER_MAXFRM_SZ 0x00000110
+#define R_SER_ADDR 0x00000118
+#define R_SER_USR0_ADDR 0x00000120
+#define R_SER_USR1_ADDR 0x00000128
+#define R_SER_USR2_ADDR 0x00000130
+#define R_SER_USR3_ADDR 0x00000138
+#define R_SER_CMD 0x00000140
+#define R_SER_TX_RD_THRSH 0x00000160
+#define R_SER_TX_WR_THRSH 0x00000168
+#define R_SER_RX_RD_THRSH 0x00000170
+#define R_SER_LINE_MODE 0x00000178
+#define R_SER_DMA_ENABLE 0x00000180
+#define R_SER_INT_MASK 0x00000190
+#define R_SER_STATUS 0x00000188
+#define R_SER_STATUS_DEBUG 0x000001A8
+#define R_SER_RX_TABLE_BASE 0x00000200
+#define SER_RX_TABLE_COUNT 16
+#define R_SER_TX_TABLE_BASE 0x00000300
+#define SER_TX_TABLE_COUNT 16
+
+/* RMON Counters */
+#define R_SER_RMON_TX_BYTE_LO 0x000001C0
+#define R_SER_RMON_TX_BYTE_HI 0x000001C8
+#define R_SER_RMON_RX_BYTE_LO 0x000001D0
+#define R_SER_RMON_RX_BYTE_HI 0x000001D8
+#define R_SER_RMON_TX_UNDERRUN 0x000001E0
+#define R_SER_RMON_RX_OVERFLOW 0x000001E8
+#define R_SER_RMON_RX_ERRORS 0x000001F0
+#define R_SER_RMON_RX_BADADDR 0x000001F8
+
+#endif /* 1250/112x */
+
+/* *********************************************************************
+ * Generic Bus Registers
+ ********************************************************************* */
+
+#define IO_EXT_CFG_COUNT 8
+
+#define A_IO_EXT_BASE 0x0010061000
+#define A_IO_EXT_REG(r) (A_IO_EXT_BASE + (r))
+
+#define A_IO_EXT_CFG_BASE 0x0010061000
+#define A_IO_EXT_MULT_SIZE_BASE 0x0010061100
+#define A_IO_EXT_START_ADDR_BASE 0x0010061200
+#define A_IO_EXT_TIME_CFG0_BASE 0x0010061600
+#define A_IO_EXT_TIME_CFG1_BASE 0x0010061700
+
+#define IO_EXT_REGISTER_SPACING 8
+#define A_IO_EXT_CS_BASE(cs) (A_IO_EXT_CFG_BASE+IO_EXT_REGISTER_SPACING*(cs))
+#define R_IO_EXT_REG(reg, cs) ((cs)*IO_EXT_REGISTER_SPACING + (reg))
+
+#define R_IO_EXT_CFG 0x0000
+#define R_IO_EXT_MULT_SIZE 0x0100
+#define R_IO_EXT_START_ADDR 0x0200
+#define R_IO_EXT_TIME_CFG0 0x0600
+#define R_IO_EXT_TIME_CFG1 0x0700
+
+
+#define A_IO_INTERRUPT_STATUS 0x0010061A00
+#define A_IO_INTERRUPT_DATA0 0x0010061A10
+#define A_IO_INTERRUPT_DATA1 0x0010061A18
+#define A_IO_INTERRUPT_DATA2 0x0010061A20
+#define A_IO_INTERRUPT_DATA3 0x0010061A28
+#define A_IO_INTERRUPT_ADDR0 0x0010061A30
+#define A_IO_INTERRUPT_ADDR1 0x0010061A40
+#define A_IO_INTERRUPT_PARITY 0x0010061A50
+#define A_IO_PCMCIA_CFG 0x0010061A60
+#define A_IO_PCMCIA_STATUS 0x0010061A70
+#define A_IO_DRIVE_0 0x0010061300
+#define A_IO_DRIVE_1 0x0010061308
+#define A_IO_DRIVE_2 0x0010061310
+#define A_IO_DRIVE_3 0x0010061318
+#define A_IO_DRIVE_BASE A_IO_DRIVE_0
+#define IO_DRIVE_REGISTER_SPACING 8
+#define R_IO_DRIVE(x) ((x)*IO_DRIVE_REGISTER_SPACING)
+#define A_IO_DRIVE(x) (A_IO_DRIVE_BASE + R_IO_DRIVE(x))
+
+#define R_IO_INTERRUPT_STATUS 0x0A00
+#define R_IO_INTERRUPT_DATA0 0x0A10
+#define R_IO_INTERRUPT_DATA1 0x0A18
+#define R_IO_INTERRUPT_DATA2 0x0A20
+#define R_IO_INTERRUPT_DATA3 0x0A28
+#define R_IO_INTERRUPT_ADDR0 0x0A30
+#define R_IO_INTERRUPT_ADDR1 0x0A40
+#define R_IO_INTERRUPT_PARITY 0x0A50
+#define R_IO_PCMCIA_CFG 0x0A60
+#define R_IO_PCMCIA_STATUS 0x0A70
+
+/* *********************************************************************
+ * GPIO Registers
+ ********************************************************************* */
+
+#define A_GPIO_CLR_EDGE 0x0010061A80
+#define A_GPIO_INT_TYPE 0x0010061A88
+#define A_GPIO_INPUT_INVERT 0x0010061A90
+#define A_GPIO_GLITCH 0x0010061A98
+#define A_GPIO_READ 0x0010061AA0
+#define A_GPIO_DIRECTION 0x0010061AA8
+#define A_GPIO_PIN_CLR 0x0010061AB0
+#define A_GPIO_PIN_SET 0x0010061AB8
+
+#define A_GPIO_BASE 0x0010061A80
+
+#define R_GPIO_CLR_EDGE 0x00
+#define R_GPIO_INT_TYPE 0x08
+#define R_GPIO_INPUT_INVERT 0x10
+#define R_GPIO_GLITCH 0x18
+#define R_GPIO_READ 0x20
+#define R_GPIO_DIRECTION 0x28
+#define R_GPIO_PIN_CLR 0x30
+#define R_GPIO_PIN_SET 0x38
+
+/* *********************************************************************
+ * SMBus Registers
+ ********************************************************************* */
+
+#define A_SMB_XTRA_0 0x0010060000
+#define A_SMB_XTRA_1 0x0010060008
+#define A_SMB_FREQ_0 0x0010060010
+#define A_SMB_FREQ_1 0x0010060018
+#define A_SMB_STATUS_0 0x0010060020
+#define A_SMB_STATUS_1 0x0010060028
+#define A_SMB_CMD_0 0x0010060030
+#define A_SMB_CMD_1 0x0010060038
+#define A_SMB_START_0 0x0010060040
+#define A_SMB_START_1 0x0010060048
+#define A_SMB_DATA_0 0x0010060050
+#define A_SMB_DATA_1 0x0010060058
+#define A_SMB_CONTROL_0 0x0010060060
+#define A_SMB_CONTROL_1 0x0010060068
+#define A_SMB_PEC_0 0x0010060070
+#define A_SMB_PEC_1 0x0010060078
+
+#define A_SMB_0 0x0010060000
+#define A_SMB_1 0x0010060008
+#define SMB_REGISTER_SPACING 0x8
+#define A_SMB_BASE(idx) (A_SMB_0+(idx)*SMB_REGISTER_SPACING)
+#define A_SMB_REGISTER(idx, reg) (A_SMB_BASE(idx)+(reg))
+
+#define R_SMB_XTRA 0x0000000000
+#define R_SMB_FREQ 0x0000000010
+#define R_SMB_STATUS 0x0000000020
+#define R_SMB_CMD 0x0000000030
+#define R_SMB_START 0x0000000040
+#define R_SMB_DATA 0x0000000050
+#define R_SMB_CONTROL 0x0000000060
+#define R_SMB_PEC 0x0000000070
+
+/* *********************************************************************
+ * Timer Registers
+ ********************************************************************* */
+
+/*
+ * Watchdog timers
+ */
+
+#define A_SCD_WDOG_0 0x0010020050
+#define A_SCD_WDOG_1 0x0010020150
+#define SCD_WDOG_SPACING 0x100
+#define SCD_NUM_WDOGS 2
+#define A_SCD_WDOG_BASE(w) (A_SCD_WDOG_0+SCD_WDOG_SPACING*(w))
+#define A_SCD_WDOG_REGISTER(w, r) (A_SCD_WDOG_BASE(w) + (r))
+
+#define R_SCD_WDOG_INIT 0x0000000000
+#define R_SCD_WDOG_CNT 0x0000000008
+#define R_SCD_WDOG_CFG 0x0000000010
+
+#define A_SCD_WDOG_INIT_0 0x0010020050
+#define A_SCD_WDOG_CNT_0 0x0010020058
+#define A_SCD_WDOG_CFG_0 0x0010020060
+
+#define A_SCD_WDOG_INIT_1 0x0010020150
+#define A_SCD_WDOG_CNT_1 0x0010020158
+#define A_SCD_WDOG_CFG_1 0x0010020160
+
+/*
+ * Generic timers
+ */
+
+#define A_SCD_TIMER_0 0x0010020070
+#define A_SCD_TIMER_1 0x0010020078
+#define A_SCD_TIMER_2 0x0010020170
+#define A_SCD_TIMER_3 0x0010020178
+#define SCD_NUM_TIMERS 4
+#define A_SCD_TIMER_BASE(w) (A_SCD_TIMER_0+0x08*((w)&1)+0x100*(((w)&2)>>1))
+#define A_SCD_TIMER_REGISTER(w, r) (A_SCD_TIMER_BASE(w) + (r))
+
+#define R_SCD_TIMER_INIT 0x0000000000
+#define R_SCD_TIMER_CNT 0x0000000010
+#define R_SCD_TIMER_CFG 0x0000000020
+
+#define A_SCD_TIMER_INIT_0 0x0010020070
+#define A_SCD_TIMER_CNT_0 0x0010020080
+#define A_SCD_TIMER_CFG_0 0x0010020090
+
+#define A_SCD_TIMER_INIT_1 0x0010020078
+#define A_SCD_TIMER_CNT_1 0x0010020088
+#define A_SCD_TIMER_CFG_1 0x0010020098
+
+#define A_SCD_TIMER_INIT_2 0x0010020170
+#define A_SCD_TIMER_CNT_2 0x0010020180
+#define A_SCD_TIMER_CFG_2 0x0010020190
+
+#define A_SCD_TIMER_INIT_3 0x0010020178
+#define A_SCD_TIMER_CNT_3 0x0010020188
+#define A_SCD_TIMER_CFG_3 0x0010020198
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define A_SCD_SCRATCH 0x0010020C10
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define A_SCD_ZBBUS_CYCLE_COUNT 0x0010030000
+#define A_SCD_ZBBUS_CYCLE_CP0 0x0010020C00
+#define A_SCD_ZBBUS_CYCLE_CP1 0x0010020C08
+#endif
+
+/* *********************************************************************
+ * System Control Registers
+ ********************************************************************* */
+
+#define A_SCD_SYSTEM_REVISION 0x0010020000
+#define A_SCD_SYSTEM_CFG 0x0010020008
+#define A_SCD_SYSTEM_MANUF 0x0010038000
+
+/* *********************************************************************
+ * System Address Trap Registers
+ ********************************************************************* */
+
+#define A_ADDR_TRAP_INDEX 0x00100200B0
+#define A_ADDR_TRAP_REG 0x00100200B8
+#define A_ADDR_TRAP_UP_0 0x0010020400
+#define A_ADDR_TRAP_UP_1 0x0010020408
+#define A_ADDR_TRAP_UP_2 0x0010020410
+#define A_ADDR_TRAP_UP_3 0x0010020418
+#define A_ADDR_TRAP_DOWN_0 0x0010020420
+#define A_ADDR_TRAP_DOWN_1 0x0010020428
+#define A_ADDR_TRAP_DOWN_2 0x0010020430
+#define A_ADDR_TRAP_DOWN_3 0x0010020438
+#define A_ADDR_TRAP_CFG_0 0x0010020440
+#define A_ADDR_TRAP_CFG_1 0x0010020448
+#define A_ADDR_TRAP_CFG_2 0x0010020450
+#define A_ADDR_TRAP_CFG_3 0x0010020458
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define A_ADDR_TRAP_REG_DEBUG 0x0010020460
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+#define ADDR_TRAP_SPACING 8
+#define NUM_ADDR_TRAP 4
+#define A_ADDR_TRAP_UP(n) (A_ADDR_TRAP_UP_0 + ((n) * ADDR_TRAP_SPACING))
+#define A_ADDR_TRAP_DOWN(n) (A_ADDR_TRAP_DOWN_0 + ((n) * ADDR_TRAP_SPACING))
+#define A_ADDR_TRAP_CFG(n) (A_ADDR_TRAP_CFG_0 + ((n) * ADDR_TRAP_SPACING))
+
+
+/* *********************************************************************
+ * System Interrupt Mapper Registers
+ ********************************************************************* */
+
+#define A_IMR_CPU0_BASE 0x0010020000
+#define A_IMR_CPU1_BASE 0x0010022000
+#define IMR_REGISTER_SPACING 0x2000
+#define IMR_REGISTER_SPACING_SHIFT 13
+
+#define A_IMR_MAPPER(cpu) (A_IMR_CPU0_BASE+(cpu)*IMR_REGISTER_SPACING)
+#define A_IMR_REGISTER(cpu, reg) (A_IMR_MAPPER(cpu)+(reg))
+
+#define R_IMR_INTERRUPT_DIAG 0x0010
+#define R_IMR_INTERRUPT_LDT 0x0018
+#define R_IMR_INTERRUPT_MASK 0x0028
+#define R_IMR_INTERRUPT_TRACE 0x0038
+#define R_IMR_INTERRUPT_SOURCE_STATUS 0x0040
+#define R_IMR_LDT_INTERRUPT_SET 0x0048
+#define R_IMR_LDT_INTERRUPT 0x0018
+#define R_IMR_LDT_INTERRUPT_CLR 0x0020
+#define R_IMR_MAILBOX_CPU 0x00c0
+#define R_IMR_ALIAS_MAILBOX_CPU 0x1000
+#define R_IMR_MAILBOX_SET_CPU 0x00C8
+#define R_IMR_ALIAS_MAILBOX_SET_CPU 0x1008
+#define R_IMR_MAILBOX_CLR_CPU 0x00D0
+#define R_IMR_INTERRUPT_STATUS_BASE 0x0100
+#define R_IMR_INTERRUPT_STATUS_COUNT 7
+#define R_IMR_INTERRUPT_MAP_BASE 0x0200
+#define R_IMR_INTERRUPT_MAP_COUNT 64
+
+/*
+ * these macros work together to build the address of a mailbox
+ * register, e.g., A_MAILBOX_REGISTER(R_IMR_MAILBOX_SET_CPU,1)
+ * for mbox_0_set_cpu2 returns 0x00100240C8
+ */
+#define A_MAILBOX_REGISTER(reg,cpu) \
+ (A_IMR_CPU0_BASE + (cpu * IMR_REGISTER_SPACING) + reg)
+
+/* *********************************************************************
+ * System Performance Counter Registers
+ ********************************************************************* */
+
+#define A_SCD_PERF_CNT_CFG 0x00100204C0
+#define A_SCD_PERF_CNT_0 0x00100204D0
+#define A_SCD_PERF_CNT_1 0x00100204D8
+#define A_SCD_PERF_CNT_2 0x00100204E0
+#define A_SCD_PERF_CNT_3 0x00100204E8
+
+#define SCD_NUM_PERF_CNT 4
+#define SCD_PERF_CNT_SPACING 8
+#define A_SCD_PERF_CNT(n) (A_SCD_PERF_CNT_0+(n*SCD_PERF_CNT_SPACING))
+
+/* *********************************************************************
+ * System Bus Watcher Registers
+ ********************************************************************* */
+
+#define A_SCD_BUS_ERR_STATUS 0x0010020880
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define A_SCD_BUS_ERR_STATUS_DEBUG 0x00100208D0
+#define A_BUS_ERR_STATUS_DEBUG 0x00100208D0
+#endif /* 1250 PASS2 || 112x PASS1 */
+#define A_BUS_ERR_DATA_0 0x00100208A0
+#define A_BUS_ERR_DATA_1 0x00100208A8
+#define A_BUS_ERR_DATA_2 0x00100208B0
+#define A_BUS_ERR_DATA_3 0x00100208B8
+#define A_BUS_L2_ERRORS 0x00100208C0
+#define A_BUS_MEM_IO_ERRORS 0x00100208C8
+
+/* *********************************************************************
+ * System Debug Controller Registers
+ ********************************************************************* */
+
+#define A_SCD_JTAG_BASE 0x0010000000
+
+/* *********************************************************************
+ * System Trace Buffer Registers
+ ********************************************************************* */
+
+#define A_SCD_TRACE_CFG 0x0010020A00
+#define A_SCD_TRACE_READ 0x0010020A08
+#define A_SCD_TRACE_EVENT_0 0x0010020A20
+#define A_SCD_TRACE_EVENT_1 0x0010020A28
+#define A_SCD_TRACE_EVENT_2 0x0010020A30
+#define A_SCD_TRACE_EVENT_3 0x0010020A38
+#define A_SCD_TRACE_SEQUENCE_0 0x0010020A40
+#define A_SCD_TRACE_SEQUENCE_1 0x0010020A48
+#define A_SCD_TRACE_SEQUENCE_2 0x0010020A50
+#define A_SCD_TRACE_SEQUENCE_3 0x0010020A58
+#define A_SCD_TRACE_EVENT_4 0x0010020A60
+#define A_SCD_TRACE_EVENT_5 0x0010020A68
+#define A_SCD_TRACE_EVENT_6 0x0010020A70
+#define A_SCD_TRACE_EVENT_7 0x0010020A78
+#define A_SCD_TRACE_SEQUENCE_4 0x0010020A80
+#define A_SCD_TRACE_SEQUENCE_5 0x0010020A88
+#define A_SCD_TRACE_SEQUENCE_6 0x0010020A90
+#define A_SCD_TRACE_SEQUENCE_7 0x0010020A98
+
+#define TRACE_REGISTER_SPACING 8
+#define TRACE_NUM_REGISTERS 8
+#define A_SCD_TRACE_EVENT(n) (((n) & 4) ? \
+ (A_SCD_TRACE_EVENT_4 + (((n) & 3) * TRACE_REGISTER_SPACING)) : \
+ (A_SCD_TRACE_EVENT_0 + ((n) * TRACE_REGISTER_SPACING)))
+#define A_SCD_TRACE_SEQUENCE(n) (((n) & 4) ? \
+ (A_SCD_TRACE_SEQUENCE_4 + (((n) & 3) * TRACE_REGISTER_SPACING)) : \
+ (A_SCD_TRACE_SEQUENCE_0 + ((n) * TRACE_REGISTER_SPACING)))
+
+/* *********************************************************************
+ * System Generic DMA Registers
+ ********************************************************************* */
+
+#define A_DM_0 0x0010020B00
+#define A_DM_1 0x0010020B20
+#define A_DM_2 0x0010020B40
+#define A_DM_3 0x0010020B60
+#define DM_REGISTER_SPACING 0x20
+#define DM_NUM_CHANNELS 4
+#define A_DM_BASE(idx) (A_DM_0 + ((idx) * DM_REGISTER_SPACING))
+#define A_DM_REGISTER(idx, reg) (A_DM_BASE(idx) + (reg))
+
+#define R_DM_DSCR_BASE 0x0000000000
+#define R_DM_DSCR_COUNT 0x0000000008
+#define R_DM_CUR_DSCR_ADDR 0x0000000010
+#define R_DM_DSCR_BASE_DEBUG 0x0000000018
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define A_DM_PARTIAL_0 0x0010020ba0
+#define A_DM_PARTIAL_1 0x0010020ba8
+#define A_DM_PARTIAL_2 0x0010020bb0
+#define A_DM_PARTIAL_3 0x0010020bb8
+#define DM_PARTIAL_REGISTER_SPACING 0x8
+#define A_DM_PARTIAL(idx) (A_DM_PARTIAL_0 + ((idx) * DM_PARTIAL_REGISTER_SPACING))
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define A_DM_CRC_0 0x0010020b80
+#define A_DM_CRC_1 0x0010020b90
+#define DM_CRC_REGISTER_SPACING 0x10
+#define DM_CRC_NUM_CHANNELS 2
+#define A_DM_CRC_BASE(idx) (A_DM_CRC_0 + ((idx) * DM_CRC_REGISTER_SPACING))
+#define A_DM_CRC_REGISTER(idx, reg) (A_DM_CRC_BASE(idx) + (reg))
+
+#define R_CRC_DEF_0 0x00
+#define R_CTCP_DEF_0 0x08
+#endif /* 1250 PASS3 || 112x PASS1 */
+
+/* *********************************************************************
+ * Physical Address Map
+ ********************************************************************* */
+
+#if SIBYTE_HDR_FEATURE_1250_112x
+#define A_PHYS_MEMORY_0 _SB_MAKE64(0x0000000000)
+#define A_PHYS_MEMORY_SIZE _SB_MAKE64((256*1024*1024))
+#define A_PHYS_SYSTEM_CTL _SB_MAKE64(0x0010000000)
+#define A_PHYS_IO_SYSTEM _SB_MAKE64(0x0010060000)
+#define A_PHYS_GENBUS _SB_MAKE64(0x0010090000)
+#define A_PHYS_GENBUS_END _SB_MAKE64(0x0040000000)
+#define A_PHYS_LDTPCI_IO_MATCH_BYTES_32 _SB_MAKE64(0x0040000000)
+#define A_PHYS_LDTPCI_IO_MATCH_BITS_32 _SB_MAKE64(0x0060000000)
+#define A_PHYS_MEMORY_1 _SB_MAKE64(0x0080000000)
+#define A_PHYS_MEMORY_2 _SB_MAKE64(0x0090000000)
+#define A_PHYS_MEMORY_3 _SB_MAKE64(0x00C0000000)
+#define A_PHYS_L2_CACHE_TEST _SB_MAKE64(0x00D0000000)
+#define A_PHYS_LDT_SPECIAL_MATCH_BYTES _SB_MAKE64(0x00D8000000)
+#define A_PHYS_LDTPCI_IO_MATCH_BYTES _SB_MAKE64(0x00DC000000)
+#define A_PHYS_LDTPCI_CFG_MATCH_BYTES _SB_MAKE64(0x00DE000000)
+#define A_PHYS_LDT_SPECIAL_MATCH_BITS _SB_MAKE64(0x00F8000000)
+#define A_PHYS_LDTPCI_IO_MATCH_BITS _SB_MAKE64(0x00FC000000)
+#define A_PHYS_LDTPCI_CFG_MATCH_BITS _SB_MAKE64(0x00FE000000)
+#define A_PHYS_MEMORY_EXP _SB_MAKE64(0x0100000000)
+#define A_PHYS_MEMORY_EXP_SIZE _SB_MAKE64((508*1024*1024*1024))
+#define A_PHYS_LDT_EXP _SB_MAKE64(0x8000000000)
+#define A_PHYS_PCI_FULLACCESS_BYTES _SB_MAKE64(0xF000000000)
+#define A_PHYS_PCI_FULLACCESS_BITS _SB_MAKE64(0xF100000000)
+#define A_PHYS_RESERVED _SB_MAKE64(0xF200000000)
+#define A_PHYS_RESERVED_SPECIAL_LDT _SB_MAKE64(0xFD00000000)
+
+#define A_PHYS_L2CACHE_WAY_SIZE _SB_MAKE64(0x0000020000)
+#define PHYS_L2CACHE_NUM_WAYS 4
+#define A_PHYS_L2CACHE_TOTAL_SIZE _SB_MAKE64(0x0000080000)
+#define A_PHYS_L2CACHE_WAY0 _SB_MAKE64(0x00D0180000)
+#define A_PHYS_L2CACHE_WAY1 _SB_MAKE64(0x00D01A0000)
+#define A_PHYS_L2CACHE_WAY2 _SB_MAKE64(0x00D01C0000)
+#define A_PHYS_L2CACHE_WAY3 _SB_MAKE64(0x00D01E0000)
+#endif
+
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_scd.h b/arch/mips/include/asm/sibyte/sb1250_scd.h
new file mode 100644
index 00000000000..e49c3e89b5e
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_scd.h
@@ -0,0 +1,654 @@
+/* *********************************************************************
+ * SB1250 Board Support Package
+ *
+ * SCD Constants and Macros File: sb1250_scd.h
+ *
+ * This module contains constants and macros useful for
+ * manipulating the System Control and Debug module on the 1250.
+ *
+ * SB1250 specification level: User's manual 1/02/02
+ *
+ *********************************************************************
+ *
+ * Copyright 2000,2001,2002,2003,2004,2005
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+#ifndef _SB1250_SCD_H
+#define _SB1250_SCD_H
+
+#include "sb1250_defs.h"
+
+/* *********************************************************************
+ * System control/debug registers
+ ********************************************************************* */
+
+/*
+ * System Revision Register (Table 4-1)
+ */
+
+#define M_SYS_RESERVED _SB_MAKEMASK(8, 0)
+
+#define S_SYS_REVISION _SB_MAKE64(8)
+#define M_SYS_REVISION _SB_MAKEMASK(8, S_SYS_REVISION)
+#define V_SYS_REVISION(x) _SB_MAKEVALUE(x, S_SYS_REVISION)
+#define G_SYS_REVISION(x) _SB_GETVALUE(x, S_SYS_REVISION, M_SYS_REVISION)
+
+#define K_SYS_REVISION_BCM1250_PASS1 0x01
+
+#define K_SYS_REVISION_BCM1250_PASS2 0x03
+#define K_SYS_REVISION_BCM1250_A1 0x03 /* Pass 2.0 WB */
+#define K_SYS_REVISION_BCM1250_A2 0x04 /* Pass 2.0 FC */
+#define K_SYS_REVISION_BCM1250_A3 0x05 /* Pass 2.1 FC */
+#define K_SYS_REVISION_BCM1250_A4 0x06 /* Pass 2.1 WB */
+#define K_SYS_REVISION_BCM1250_A6 0x07 /* OR 0x04 (A2) w/WID != 0 */
+#define K_SYS_REVISION_BCM1250_A8 0x0b /* A8/A10 */
+#define K_SYS_REVISION_BCM1250_A9 0x08
+#define K_SYS_REVISION_BCM1250_A10 K_SYS_REVISION_BCM1250_A8
+
+#define K_SYS_REVISION_BCM1250_PASS2_2 0x10
+#define K_SYS_REVISION_BCM1250_B0 K_SYS_REVISION_BCM1250_B1
+#define K_SYS_REVISION_BCM1250_B1 0x10
+#define K_SYS_REVISION_BCM1250_B2 0x11
+
+#define K_SYS_REVISION_BCM1250_C0 0x20
+#define K_SYS_REVISION_BCM1250_C1 0x21
+#define K_SYS_REVISION_BCM1250_C2 0x22
+#define K_SYS_REVISION_BCM1250_C3 0x23
+
+#if SIBYTE_HDR_FEATURE_CHIP(1250)
+/* XXX: discourage people from using these constants. */
+#define K_SYS_REVISION_PASS1 K_SYS_REVISION_BCM1250_PASS1
+#define K_SYS_REVISION_PASS2 K_SYS_REVISION_BCM1250_PASS2
+#define K_SYS_REVISION_PASS2_2 K_SYS_REVISION_BCM1250_PASS2_2
+#define K_SYS_REVISION_PASS3 K_SYS_REVISION_BCM1250_PASS3
+#define K_SYS_REVISION_BCM1250_PASS3 K_SYS_REVISION_BCM1250_C0
+#endif /* 1250 */
+
+#define K_SYS_REVISION_BCM112x_A1 0x20
+#define K_SYS_REVISION_BCM112x_A2 0x21
+#define K_SYS_REVISION_BCM112x_A3 0x22
+#define K_SYS_REVISION_BCM112x_A4 0x23
+#define K_SYS_REVISION_BCM112x_B0 0x30
+
+#define K_SYS_REVISION_BCM1480_S0 0x01
+#define K_SYS_REVISION_BCM1480_A1 0x02
+#define K_SYS_REVISION_BCM1480_A2 0x03
+#define K_SYS_REVISION_BCM1480_A3 0x04
+#define K_SYS_REVISION_BCM1480_B0 0x11
+
+/*Cache size - 23:20 of revision register*/
+#define S_SYS_L2C_SIZE _SB_MAKE64(20)
+#define M_SYS_L2C_SIZE _SB_MAKEMASK(4, S_SYS_L2C_SIZE)
+#define V_SYS_L2C_SIZE(x) _SB_MAKEVALUE(x, S_SYS_L2C_SIZE)
+#define G_SYS_L2C_SIZE(x) _SB_GETVALUE(x, S_SYS_L2C_SIZE, M_SYS_L2C_SIZE)
+
+#define K_SYS_L2C_SIZE_1MB 0
+#define K_SYS_L2C_SIZE_512KB 5
+#define K_SYS_L2C_SIZE_256KB 2
+#define K_SYS_L2C_SIZE_128KB 1
+
+#define K_SYS_L2C_SIZE_BCM1250 K_SYS_L2C_SIZE_512KB
+#define K_SYS_L2C_SIZE_BCM1125 K_SYS_L2C_SIZE_256KB
+#define K_SYS_L2C_SIZE_BCM1122 K_SYS_L2C_SIZE_128KB
+
+
+/* Number of CPU cores, bits 27:24 of revision register*/
+#define S_SYS_NUM_CPUS _SB_MAKE64(24)
+#define M_SYS_NUM_CPUS _SB_MAKEMASK(4, S_SYS_NUM_CPUS)
+#define V_SYS_NUM_CPUS(x) _SB_MAKEVALUE(x, S_SYS_NUM_CPUS)
+#define G_SYS_NUM_CPUS(x) _SB_GETVALUE(x, S_SYS_NUM_CPUS, M_SYS_NUM_CPUS)
+
+
+/* XXX: discourage people from using these constants. */
+#define S_SYS_PART _SB_MAKE64(16)
+#define M_SYS_PART _SB_MAKEMASK(16, S_SYS_PART)
+#define V_SYS_PART(x) _SB_MAKEVALUE(x, S_SYS_PART)
+#define G_SYS_PART(x) _SB_GETVALUE(x, S_SYS_PART, M_SYS_PART)
+
+/* XXX: discourage people from using these constants. */
+#define K_SYS_PART_SB1250 0x1250
+#define K_SYS_PART_BCM1120 0x1121
+#define K_SYS_PART_BCM1125 0x1123
+#define K_SYS_PART_BCM1125H 0x1124
+#define K_SYS_PART_BCM1122 0x1113
+
+
+/* The "peripheral set" (SOC type) is the low 4 bits of the "part" field. */
+#define S_SYS_SOC_TYPE _SB_MAKE64(16)
+#define M_SYS_SOC_TYPE _SB_MAKEMASK(4, S_SYS_SOC_TYPE)
+#define V_SYS_SOC_TYPE(x) _SB_MAKEVALUE(x, S_SYS_SOC_TYPE)
+#define G_SYS_SOC_TYPE(x) _SB_GETVALUE(x, S_SYS_SOC_TYPE, M_SYS_SOC_TYPE)
+
+#define K_SYS_SOC_TYPE_BCM1250 0x0
+#define K_SYS_SOC_TYPE_BCM1120 0x1
+#define K_SYS_SOC_TYPE_BCM1250_ALT 0x2 /* 1250pass2 w/ 1/4 L2. */
+#define K_SYS_SOC_TYPE_BCM1125 0x3
+#define K_SYS_SOC_TYPE_BCM1125H 0x4
+#define K_SYS_SOC_TYPE_BCM1250_ALT2 0x5 /* 1250pass2 w/ 1/2 L2. */
+#define K_SYS_SOC_TYPE_BCM1x80 0x6
+#define K_SYS_SOC_TYPE_BCM1x55 0x7
+
+/*
+ * Calculate correct SOC type given a copy of system revision register.
+ *
+ * (For the assembler version, sysrev and dest may be the same register.
+ * Also, it clobbers AT.)
+ */
+#ifdef __ASSEMBLER__
+#define SYS_SOC_TYPE(dest, sysrev) \
+ .set push ; \
+ .set reorder ; \
+ dsrl dest, sysrev, S_SYS_SOC_TYPE ; \
+ andi dest, dest, (M_SYS_SOC_TYPE >> S_SYS_SOC_TYPE); \
+ beq dest, K_SYS_SOC_TYPE_BCM1250_ALT, 991f ; \
+ beq dest, K_SYS_SOC_TYPE_BCM1250_ALT2, 991f ; \
+ b 992f ; \
+991: li dest, K_SYS_SOC_TYPE_BCM1250 ; \
+992: \
+ .set pop
+#else
+#define SYS_SOC_TYPE(sysrev) \
+ ((G_SYS_SOC_TYPE(sysrev) == K_SYS_SOC_TYPE_BCM1250_ALT \
+ || G_SYS_SOC_TYPE(sysrev) == K_SYS_SOC_TYPE_BCM1250_ALT2) \
+ ? K_SYS_SOC_TYPE_BCM1250 : G_SYS_SOC_TYPE(sysrev))
+#endif
+
+#define S_SYS_WID _SB_MAKE64(32)
+#define M_SYS_WID _SB_MAKEMASK(32, S_SYS_WID)
+#define V_SYS_WID(x) _SB_MAKEVALUE(x, S_SYS_WID)
+#define G_SYS_WID(x) _SB_GETVALUE(x, S_SYS_WID, M_SYS_WID)
+
+/*
+ * System Manufacturing Register
+ * Register: SCD_SYSTEM_MANUF
+ */
+
+#if SIBYTE_HDR_FEATURE_1250_112x
+/* Wafer ID: bits 31:0 */
+#define S_SYS_WAFERID1_200 _SB_MAKE64(0)
+#define M_SYS_WAFERID1_200 _SB_MAKEMASK(32, S_SYS_WAFERID1_200)
+#define V_SYS_WAFERID1_200(x) _SB_MAKEVALUE(x, S_SYS_WAFERID1_200)
+#define G_SYS_WAFERID1_200(x) _SB_GETVALUE(x, S_SYS_WAFERID1_200, M_SYS_WAFERID1_200)
+
+#define S_SYS_BIN _SB_MAKE64(32)
+#define M_SYS_BIN _SB_MAKEMASK(4, S_SYS_BIN)
+#define V_SYS_BIN(x) _SB_MAKEVALUE(x, S_SYS_BIN)
+#define G_SYS_BIN(x) _SB_GETVALUE(x, S_SYS_BIN, M_SYS_BIN)
+
+/* Wafer ID: bits 39:36 */
+#define S_SYS_WAFERID2_200 _SB_MAKE64(36)
+#define M_SYS_WAFERID2_200 _SB_MAKEMASK(4, S_SYS_WAFERID2_200)
+#define V_SYS_WAFERID2_200(x) _SB_MAKEVALUE(x, S_SYS_WAFERID2_200)
+#define G_SYS_WAFERID2_200(x) _SB_GETVALUE(x, S_SYS_WAFERID2_200, M_SYS_WAFERID2_200)
+
+/* Wafer ID: bits 39:0 */
+#define S_SYS_WAFERID_300 _SB_MAKE64(0)
+#define M_SYS_WAFERID_300 _SB_MAKEMASK(40, S_SYS_WAFERID_300)
+#define V_SYS_WAFERID_300(x) _SB_MAKEVALUE(x, S_SYS_WAFERID_300)
+#define G_SYS_WAFERID_300(x) _SB_GETVALUE(x, S_SYS_WAFERID_300, M_SYS_WAFERID_300)
+
+#define S_SYS_XPOS _SB_MAKE64(40)
+#define M_SYS_XPOS _SB_MAKEMASK(6, S_SYS_XPOS)
+#define V_SYS_XPOS(x) _SB_MAKEVALUE(x, S_SYS_XPOS)
+#define G_SYS_XPOS(x) _SB_GETVALUE(x, S_SYS_XPOS, M_SYS_XPOS)
+
+#define S_SYS_YPOS _SB_MAKE64(46)
+#define M_SYS_YPOS _SB_MAKEMASK(6, S_SYS_YPOS)
+#define V_SYS_YPOS(x) _SB_MAKEVALUE(x, S_SYS_YPOS)
+#define G_SYS_YPOS(x) _SB_GETVALUE(x, S_SYS_YPOS, M_SYS_YPOS)
+#endif
+
+
+/*
+ * System Config Register (Table 4-2)
+ * Register: SCD_SYSTEM_CFG
+ */
+
+#if SIBYTE_HDR_FEATURE_1250_112x
+#define M_SYS_LDT_PLL_BYP _SB_MAKEMASK1(3)
+#define M_SYS_PCI_SYNC_TEST_MODE _SB_MAKEMASK1(4)
+#define M_SYS_IOB0_DIV _SB_MAKEMASK1(5)
+#define M_SYS_IOB1_DIV _SB_MAKEMASK1(6)
+
+#define S_SYS_PLL_DIV _SB_MAKE64(7)
+#define M_SYS_PLL_DIV _SB_MAKEMASK(5, S_SYS_PLL_DIV)
+#define V_SYS_PLL_DIV(x) _SB_MAKEVALUE(x, S_SYS_PLL_DIV)
+#define G_SYS_PLL_DIV(x) _SB_GETVALUE(x, S_SYS_PLL_DIV, M_SYS_PLL_DIV)
+
+#define M_SYS_SER0_ENABLE _SB_MAKEMASK1(12)
+#define M_SYS_SER0_RSTB_EN _SB_MAKEMASK1(13)
+#define M_SYS_SER1_ENABLE _SB_MAKEMASK1(14)
+#define M_SYS_SER1_RSTB_EN _SB_MAKEMASK1(15)
+#define M_SYS_PCMCIA_ENABLE _SB_MAKEMASK1(16)
+
+#define S_SYS_BOOT_MODE _SB_MAKE64(17)
+#define M_SYS_BOOT_MODE _SB_MAKEMASK(2, S_SYS_BOOT_MODE)
+#define V_SYS_BOOT_MODE(x) _SB_MAKEVALUE(x, S_SYS_BOOT_MODE)
+#define G_SYS_BOOT_MODE(x) _SB_GETVALUE(x, S_SYS_BOOT_MODE, M_SYS_BOOT_MODE)
+#define K_SYS_BOOT_MODE_ROM32 0
+#define K_SYS_BOOT_MODE_ROM8 1
+#define K_SYS_BOOT_MODE_SMBUS_SMALL 2
+#define K_SYS_BOOT_MODE_SMBUS_BIG 3
+
+#define M_SYS_PCI_HOST _SB_MAKEMASK1(19)
+#define M_SYS_PCI_ARBITER _SB_MAKEMASK1(20)
+#define M_SYS_SOUTH_ON_LDT _SB_MAKEMASK1(21)
+#define M_SYS_BIG_ENDIAN _SB_MAKEMASK1(22)
+#define M_SYS_GENCLK_EN _SB_MAKEMASK1(23)
+#define M_SYS_LDT_TEST_EN _SB_MAKEMASK1(24)
+#define M_SYS_GEN_PARITY_EN _SB_MAKEMASK1(25)
+
+#define S_SYS_CONFIG 26
+#define M_SYS_CONFIG _SB_MAKEMASK(6, S_SYS_CONFIG)
+#define V_SYS_CONFIG(x) _SB_MAKEVALUE(x, S_SYS_CONFIG)
+#define G_SYS_CONFIG(x) _SB_GETVALUE(x, S_SYS_CONFIG, M_SYS_CONFIG)
+
+/* The following bits are writeable by JTAG only. */
+
+#define M_SYS_CLKSTOP _SB_MAKEMASK1(32)
+#define M_SYS_CLKSTEP _SB_MAKEMASK1(33)
+
+#define S_SYS_CLKCOUNT 34
+#define M_SYS_CLKCOUNT _SB_MAKEMASK(8, S_SYS_CLKCOUNT)
+#define V_SYS_CLKCOUNT(x) _SB_MAKEVALUE(x, S_SYS_CLKCOUNT)
+#define G_SYS_CLKCOUNT(x) _SB_GETVALUE(x, S_SYS_CLKCOUNT, M_SYS_CLKCOUNT)
+
+#define M_SYS_PLL_BYPASS _SB_MAKEMASK1(42)
+
+#define S_SYS_PLL_IREF 43
+#define M_SYS_PLL_IREF _SB_MAKEMASK(2, S_SYS_PLL_IREF)
+
+#define S_SYS_PLL_VCO 45
+#define M_SYS_PLL_VCO _SB_MAKEMASK(2, S_SYS_PLL_VCO)
+
+#define S_SYS_PLL_VREG 47
+#define M_SYS_PLL_VREG _SB_MAKEMASK(2, S_SYS_PLL_VREG)
+
+#define M_SYS_MEM_RESET _SB_MAKEMASK1(49)
+#define M_SYS_L2C_RESET _SB_MAKEMASK1(50)
+#define M_SYS_IO_RESET_0 _SB_MAKEMASK1(51)
+#define M_SYS_IO_RESET_1 _SB_MAKEMASK1(52)
+#define M_SYS_SCD_RESET _SB_MAKEMASK1(53)
+
+/* End of bits writable by JTAG only. */
+
+#define M_SYS_CPU_RESET_0 _SB_MAKEMASK1(54)
+#define M_SYS_CPU_RESET_1 _SB_MAKEMASK1(55)
+
+#define M_SYS_UNICPU0 _SB_MAKEMASK1(56)
+#define M_SYS_UNICPU1 _SB_MAKEMASK1(57)
+
+#define M_SYS_SB_SOFTRES _SB_MAKEMASK1(58)
+#define M_SYS_EXT_RESET _SB_MAKEMASK1(59)
+#define M_SYS_SYSTEM_RESET _SB_MAKEMASK1(60)
+
+#define M_SYS_MISR_MODE _SB_MAKEMASK1(61)
+#define M_SYS_MISR_RESET _SB_MAKEMASK1(62)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#define M_SYS_SW_FLAG _SB_MAKEMASK1(63)
+#endif /* 1250 PASS2 || 112x PASS1 */
+
+#endif
+
+
+/*
+ * Mailbox Registers (Table 4-3)
+ * Registers: SCD_MBOX_CPU_x
+ */
+
+#define S_MBOX_INT_3 0
+#define M_MBOX_INT_3 _SB_MAKEMASK(16, S_MBOX_INT_3)
+#define S_MBOX_INT_2 16
+#define M_MBOX_INT_2 _SB_MAKEMASK(16, S_MBOX_INT_2)
+#define S_MBOX_INT_1 32
+#define M_MBOX_INT_1 _SB_MAKEMASK(16, S_MBOX_INT_1)
+#define S_MBOX_INT_0 48
+#define M_MBOX_INT_0 _SB_MAKEMASK(16, S_MBOX_INT_0)
+
+/*
+ * Watchdog Registers (Table 4-8) (Table 4-9) (Table 4-10)
+ * Registers: SCD_WDOG_INIT_CNT_x
+ */
+
+#define V_SCD_WDOG_FREQ 1000000
+
+#define S_SCD_WDOG_INIT 0
+#define M_SCD_WDOG_INIT _SB_MAKEMASK(23, S_SCD_WDOG_INIT)
+
+#define S_SCD_WDOG_CNT 0
+#define M_SCD_WDOG_CNT _SB_MAKEMASK(23, S_SCD_WDOG_CNT)
+
+#define S_SCD_WDOG_ENABLE 0
+#define M_SCD_WDOG_ENABLE _SB_MAKEMASK1(S_SCD_WDOG_ENABLE)
+
+#define S_SCD_WDOG_RESET_TYPE 2
+#define M_SCD_WDOG_RESET_TYPE _SB_MAKEMASK(3, S_SCD_WDOG_RESET_TYPE)
+#define V_SCD_WDOG_RESET_TYPE(x) _SB_MAKEVALUE(x, S_SCD_WDOG_RESET_TYPE)
+#define G_SCD_WDOG_RESET_TYPE(x) _SB_GETVALUE(x, S_SCD_WDOG_RESET_TYPE, M_SCD_WDOG_RESET_TYPE)
+
+#define K_SCD_WDOG_RESET_FULL 0 /* actually, (x & 1) == 0 */
+#define K_SCD_WDOG_RESET_SOFT 1
+#define K_SCD_WDOG_RESET_CPU0 3
+#define K_SCD_WDOG_RESET_CPU1 5
+#define K_SCD_WDOG_RESET_BOTH_CPUS 7
+
+/* This feature is present in 1250 C0 and later, but *not* in 112x A revs. */
+#if SIBYTE_HDR_FEATURE(1250, PASS3)
+#define S_SCD_WDOG_HAS_RESET 8
+#define M_SCD_WDOG_HAS_RESET _SB_MAKEMASK1(S_SCD_WDOG_HAS_RESET)
+#endif
+
+
+/*
+ * Timer Registers (Table 4-11) (Table 4-12) (Table 4-13)
+ */
+
+#define V_SCD_TIMER_FREQ 1000000
+
+#define S_SCD_TIMER_INIT 0
+#define M_SCD_TIMER_INIT _SB_MAKEMASK(23, S_SCD_TIMER_INIT)
+#define V_SCD_TIMER_INIT(x) _SB_MAKEVALUE(x, S_SCD_TIMER_INIT)
+#define G_SCD_TIMER_INIT(x) _SB_GETVALUE(x, S_SCD_TIMER_INIT, M_SCD_TIMER_INIT)
+
+#define V_SCD_TIMER_WIDTH 23
+#define S_SCD_TIMER_CNT 0
+#define M_SCD_TIMER_CNT _SB_MAKEMASK(V_SCD_TIMER_WIDTH, S_SCD_TIMER_CNT)
+#define V_SCD_TIMER_CNT(x) _SB_MAKEVALUE(x, S_SCD_TIMER_CNT)
+#define G_SCD_TIMER_CNT(x) _SB_GETVALUE(x, S_SCD_TIMER_CNT, M_SCD_TIMER_CNT)
+
+#define M_SCD_TIMER_ENABLE _SB_MAKEMASK1(0)
+#define M_SCD_TIMER_MODE _SB_MAKEMASK1(1)
+#define M_SCD_TIMER_MODE_CONTINUOUS M_SCD_TIMER_MODE
+
+/*
+ * System Performance Counters
+ */
+
+#define S_SPC_CFG_SRC0 0
+#define M_SPC_CFG_SRC0 _SB_MAKEMASK(8, S_SPC_CFG_SRC0)
+#define V_SPC_CFG_SRC0(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC0)
+#define G_SPC_CFG_SRC0(x) _SB_GETVALUE(x, S_SPC_CFG_SRC0, M_SPC_CFG_SRC0)
+
+#define S_SPC_CFG_SRC1 8
+#define M_SPC_CFG_SRC1 _SB_MAKEMASK(8, S_SPC_CFG_SRC1)
+#define V_SPC_CFG_SRC1(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC1)
+#define G_SPC_CFG_SRC1(x) _SB_GETVALUE(x, S_SPC_CFG_SRC1, M_SPC_CFG_SRC1)
+
+#define S_SPC_CFG_SRC2 16
+#define M_SPC_CFG_SRC2 _SB_MAKEMASK(8, S_SPC_CFG_SRC2)
+#define V_SPC_CFG_SRC2(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC2)
+#define G_SPC_CFG_SRC2(x) _SB_GETVALUE(x, S_SPC_CFG_SRC2, M_SPC_CFG_SRC2)
+
+#define S_SPC_CFG_SRC3 24
+#define M_SPC_CFG_SRC3 _SB_MAKEMASK(8, S_SPC_CFG_SRC3)
+#define V_SPC_CFG_SRC3(x) _SB_MAKEVALUE(x, S_SPC_CFG_SRC3)
+#define G_SPC_CFG_SRC3(x) _SB_GETVALUE(x, S_SPC_CFG_SRC3, M_SPC_CFG_SRC3)
+
+#if SIBYTE_HDR_FEATURE_1250_112x
+#define M_SPC_CFG_CLEAR _SB_MAKEMASK1(32)
+#define M_SPC_CFG_ENABLE _SB_MAKEMASK1(33)
+#endif
+
+
+/*
+ * Bus Watcher
+ */
+
+#define S_SCD_BERR_TID 8
+#define M_SCD_BERR_TID _SB_MAKEMASK(10, S_SCD_BERR_TID)
+#define V_SCD_BERR_TID(x) _SB_MAKEVALUE(x, S_SCD_BERR_TID)
+#define G_SCD_BERR_TID(x) _SB_GETVALUE(x, S_SCD_BERR_TID, M_SCD_BERR_TID)
+
+#define S_SCD_BERR_RID 18
+#define M_SCD_BERR_RID _SB_MAKEMASK(4, S_SCD_BERR_RID)
+#define V_SCD_BERR_RID(x) _SB_MAKEVALUE(x, S_SCD_BERR_RID)
+#define G_SCD_BERR_RID(x) _SB_GETVALUE(x, S_SCD_BERR_RID, M_SCD_BERR_RID)
+
+#define S_SCD_BERR_DCODE 22
+#define M_SCD_BERR_DCODE _SB_MAKEMASK(3, S_SCD_BERR_DCODE)
+#define V_SCD_BERR_DCODE(x) _SB_MAKEVALUE(x, S_SCD_BERR_DCODE)
+#define G_SCD_BERR_DCODE(x) _SB_GETVALUE(x, S_SCD_BERR_DCODE, M_SCD_BERR_DCODE)
+
+#define M_SCD_BERR_MULTERRS _SB_MAKEMASK1(30)
+
+
+#define S_SCD_L2ECC_CORR_D 0
+#define M_SCD_L2ECC_CORR_D _SB_MAKEMASK(8, S_SCD_L2ECC_CORR_D)
+#define V_SCD_L2ECC_CORR_D(x) _SB_MAKEVALUE(x, S_SCD_L2ECC_CORR_D)
+#define G_SCD_L2ECC_CORR_D(x) _SB_GETVALUE(x, S_SCD_L2ECC_CORR_D, M_SCD_L2ECC_CORR_D)
+
+#define S_SCD_L2ECC_BAD_D 8
+#define M_SCD_L2ECC_BAD_D _SB_MAKEMASK(8, S_SCD_L2ECC_BAD_D)
+#define V_SCD_L2ECC_BAD_D(x) _SB_MAKEVALUE(x, S_SCD_L2ECC_BAD_D)
+#define G_SCD_L2ECC_BAD_D(x) _SB_GETVALUE(x, S_SCD_L2ECC_BAD_D, M_SCD_L2ECC_BAD_D)
+
+#define S_SCD_L2ECC_CORR_T 16
+#define M_SCD_L2ECC_CORR_T _SB_MAKEMASK(8, S_SCD_L2ECC_CORR_T)
+#define V_SCD_L2ECC_CORR_T(x) _SB_MAKEVALUE(x, S_SCD_L2ECC_CORR_T)
+#define G_SCD_L2ECC_CORR_T(x) _SB_GETVALUE(x, S_SCD_L2ECC_CORR_T, M_SCD_L2ECC_CORR_T)
+
+#define S_SCD_L2ECC_BAD_T 24
+#define M_SCD_L2ECC_BAD_T _SB_MAKEMASK(8, S_SCD_L2ECC_BAD_T)
+#define V_SCD_L2ECC_BAD_T(x) _SB_MAKEVALUE(x, S_SCD_L2ECC_BAD_T)
+#define G_SCD_L2ECC_BAD_T(x) _SB_GETVALUE(x, S_SCD_L2ECC_BAD_T, M_SCD_L2ECC_BAD_T)
+
+#define S_SCD_MEM_ECC_CORR 0
+#define M_SCD_MEM_ECC_CORR _SB_MAKEMASK(8, S_SCD_MEM_ECC_CORR)
+#define V_SCD_MEM_ECC_CORR(x) _SB_MAKEVALUE(x, S_SCD_MEM_ECC_CORR)
+#define G_SCD_MEM_ECC_CORR(x) _SB_GETVALUE(x, S_SCD_MEM_ECC_CORR, M_SCD_MEM_ECC_CORR)
+
+#define S_SCD_MEM_ECC_BAD 8
+#define M_SCD_MEM_ECC_BAD _SB_MAKEMASK(8, S_SCD_MEM_ECC_BAD)
+#define V_SCD_MEM_ECC_BAD(x) _SB_MAKEVALUE(x, S_SCD_MEM_ECC_BAD)
+#define G_SCD_MEM_ECC_BAD(x) _SB_GETVALUE(x, S_SCD_MEM_ECC_BAD, M_SCD_MEM_ECC_BAD)
+
+#define S_SCD_MEM_BUSERR 16
+#define M_SCD_MEM_BUSERR _SB_MAKEMASK(8, S_SCD_MEM_BUSERR)
+#define V_SCD_MEM_BUSERR(x) _SB_MAKEVALUE(x, S_SCD_MEM_BUSERR)
+#define G_SCD_MEM_BUSERR(x) _SB_GETVALUE(x, S_SCD_MEM_BUSERR, M_SCD_MEM_BUSERR)
+
+
+/*
+ * Address Trap Registers
+ */
+
+#if SIBYTE_HDR_FEATURE_1250_112x
+#define M_ATRAP_INDEX _SB_MAKEMASK(4, 0)
+#define M_ATRAP_ADDRESS _SB_MAKEMASK(40, 0)
+
+#define S_ATRAP_CFG_CNT 0
+#define M_ATRAP_CFG_CNT _SB_MAKEMASK(3, S_ATRAP_CFG_CNT)
+#define V_ATRAP_CFG_CNT(x) _SB_MAKEVALUE(x, S_ATRAP_CFG_CNT)
+#define G_ATRAP_CFG_CNT(x) _SB_GETVALUE(x, S_ATRAP_CFG_CNT, M_ATRAP_CFG_CNT)
+
+#define M_ATRAP_CFG_WRITE _SB_MAKEMASK1(3)
+#define M_ATRAP_CFG_ALL _SB_MAKEMASK1(4)
+#define M_ATRAP_CFG_INV _SB_MAKEMASK1(5)
+#define M_ATRAP_CFG_USESRC _SB_MAKEMASK1(6)
+#define M_ATRAP_CFG_SRCINV _SB_MAKEMASK1(7)
+
+#define S_ATRAP_CFG_AGENTID 8
+#define M_ATRAP_CFG_AGENTID _SB_MAKEMASK(4, S_ATRAP_CFG_AGENTID)
+#define V_ATRAP_CFG_AGENTID(x) _SB_MAKEVALUE(x, S_ATRAP_CFG_AGENTID)
+#define G_ATRAP_CFG_AGENTID(x) _SB_GETVALUE(x, S_ATRAP_CFG_AGENTID, M_ATRAP_CFG_AGENTID)
+
+#define K_BUS_AGENT_CPU0 0
+#define K_BUS_AGENT_CPU1 1
+#define K_BUS_AGENT_IOB0 2
+#define K_BUS_AGENT_IOB1 3
+#define K_BUS_AGENT_SCD 4
+#define K_BUS_AGENT_L2C 6
+#define K_BUS_AGENT_MC 7
+
+#define S_ATRAP_CFG_CATTR 12
+#define M_ATRAP_CFG_CATTR _SB_MAKEMASK(3, S_ATRAP_CFG_CATTR)
+#define V_ATRAP_CFG_CATTR(x) _SB_MAKEVALUE(x, S_ATRAP_CFG_CATTR)
+#define G_ATRAP_CFG_CATTR(x) _SB_GETVALUE(x, S_ATRAP_CFG_CATTR, M_ATRAP_CFG_CATTR)
+
+#define K_ATRAP_CFG_CATTR_IGNORE 0
+#define K_ATRAP_CFG_CATTR_UNC 1
+#define K_ATRAP_CFG_CATTR_CACHEABLE 2
+#define K_ATRAP_CFG_CATTR_NONCOH 3
+#define K_ATRAP_CFG_CATTR_COHERENT 4
+#define K_ATRAP_CFG_CATTR_NOTUNC 5
+#define K_ATRAP_CFG_CATTR_NOTNONCOH 6
+#define K_ATRAP_CFG_CATTR_NOTCOHERENT 7
+
+#endif /* 1250/112x */
+
+/*
+ * Trace Buffer Config register
+ */
+
+#define M_SCD_TRACE_CFG_RESET _SB_MAKEMASK1(0)
+#define M_SCD_TRACE_CFG_START_READ _SB_MAKEMASK1(1)
+#define M_SCD_TRACE_CFG_START _SB_MAKEMASK1(2)
+#define M_SCD_TRACE_CFG_STOP _SB_MAKEMASK1(3)
+#define M_SCD_TRACE_CFG_FREEZE _SB_MAKEMASK1(4)
+#define M_SCD_TRACE_CFG_FREEZE_FULL _SB_MAKEMASK1(5)
+#define M_SCD_TRACE_CFG_DEBUG_FULL _SB_MAKEMASK1(6)
+#define M_SCD_TRACE_CFG_FULL _SB_MAKEMASK1(7)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_SCD_TRACE_CFG_FORCECNT _SB_MAKEMASK1(8)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+/*
+ * This field is the same on the 1250/112x and 1480, just located in
+ * a slightly different place in the register.
+ */
+#if SIBYTE_HDR_FEATURE_1250_112x
+#define S_SCD_TRACE_CFG_CUR_ADDR 10
+#else
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_SCD_TRACE_CFG_CUR_ADDR 24
+#endif /* 1480 */
+#endif /* 1250/112x */
+
+#define M_SCD_TRACE_CFG_CUR_ADDR _SB_MAKEMASK(8, S_SCD_TRACE_CFG_CUR_ADDR)
+#define V_SCD_TRACE_CFG_CUR_ADDR(x) _SB_MAKEVALUE(x, S_SCD_TRACE_CFG_CUR_ADDR)
+#define G_SCD_TRACE_CFG_CUR_ADDR(x) _SB_GETVALUE(x, S_SCD_TRACE_CFG_CUR_ADDR, M_SCD_TRACE_CFG_CUR_ADDR)
+
+/*
+ * Trace Event registers
+ */
+
+#define S_SCD_TREVT_ADDR_MATCH 0
+#define M_SCD_TREVT_ADDR_MATCH _SB_MAKEMASK(4, S_SCD_TREVT_ADDR_MATCH)
+#define V_SCD_TREVT_ADDR_MATCH(x) _SB_MAKEVALUE(x, S_SCD_TREVT_ADDR_MATCH)
+#define G_SCD_TREVT_ADDR_MATCH(x) _SB_GETVALUE(x, S_SCD_TREVT_ADDR_MATCH, M_SCD_TREVT_ADDR_MATCH)
+
+#define M_SCD_TREVT_REQID_MATCH _SB_MAKEMASK1(4)
+#define M_SCD_TREVT_DATAID_MATCH _SB_MAKEMASK1(5)
+#define M_SCD_TREVT_RESPID_MATCH _SB_MAKEMASK1(6)
+#define M_SCD_TREVT_INTERRUPT _SB_MAKEMASK1(7)
+#define M_SCD_TREVT_DEBUG_PIN _SB_MAKEMASK1(9)
+#define M_SCD_TREVT_WRITE _SB_MAKEMASK1(10)
+#define M_SCD_TREVT_READ _SB_MAKEMASK1(11)
+
+#define S_SCD_TREVT_REQID 12
+#define M_SCD_TREVT_REQID _SB_MAKEMASK(4, S_SCD_TREVT_REQID)
+#define V_SCD_TREVT_REQID(x) _SB_MAKEVALUE(x, S_SCD_TREVT_REQID)
+#define G_SCD_TREVT_REQID(x) _SB_GETVALUE(x, S_SCD_TREVT_REQID, M_SCD_TREVT_REQID)
+
+#define S_SCD_TREVT_RESPID 16
+#define M_SCD_TREVT_RESPID _SB_MAKEMASK(4, S_SCD_TREVT_RESPID)
+#define V_SCD_TREVT_RESPID(x) _SB_MAKEVALUE(x, S_SCD_TREVT_RESPID)
+#define G_SCD_TREVT_RESPID(x) _SB_GETVALUE(x, S_SCD_TREVT_RESPID, M_SCD_TREVT_RESPID)
+
+#define S_SCD_TREVT_DATAID 20
+#define M_SCD_TREVT_DATAID _SB_MAKEMASK(4, S_SCD_TREVT_DATAID)
+#define V_SCD_TREVT_DATAID(x) _SB_MAKEVALUE(x, S_SCD_TREVT_DATAID)
+#define G_SCD_TREVT_DATAID(x) _SB_GETVALUE(x, S_SCD_TREVT_DATAID, M_SCD_TREVT_DATID)
+
+#define S_SCD_TREVT_COUNT 24
+#define M_SCD_TREVT_COUNT _SB_MAKEMASK(8, S_SCD_TREVT_COUNT)
+#define V_SCD_TREVT_COUNT(x) _SB_MAKEVALUE(x, S_SCD_TREVT_COUNT)
+#define G_SCD_TREVT_COUNT(x) _SB_GETVALUE(x, S_SCD_TREVT_COUNT, M_SCD_TREVT_COUNT)
+
+/*
+ * Trace Sequence registers
+ */
+
+#define S_SCD_TRSEQ_EVENT4 0
+#define M_SCD_TRSEQ_EVENT4 _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT4)
+#define V_SCD_TRSEQ_EVENT4(x) _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT4)
+#define G_SCD_TRSEQ_EVENT4(x) _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT4, M_SCD_TRSEQ_EVENT4)
+
+#define S_SCD_TRSEQ_EVENT3 4
+#define M_SCD_TRSEQ_EVENT3 _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT3)
+#define V_SCD_TRSEQ_EVENT3(x) _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT3)
+#define G_SCD_TRSEQ_EVENT3(x) _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT3, M_SCD_TRSEQ_EVENT3)
+
+#define S_SCD_TRSEQ_EVENT2 8
+#define M_SCD_TRSEQ_EVENT2 _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT2)
+#define V_SCD_TRSEQ_EVENT2(x) _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT2)
+#define G_SCD_TRSEQ_EVENT2(x) _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT2, M_SCD_TRSEQ_EVENT2)
+
+#define S_SCD_TRSEQ_EVENT1 12
+#define M_SCD_TRSEQ_EVENT1 _SB_MAKEMASK(4, S_SCD_TRSEQ_EVENT1)
+#define V_SCD_TRSEQ_EVENT1(x) _SB_MAKEVALUE(x, S_SCD_TRSEQ_EVENT1)
+#define G_SCD_TRSEQ_EVENT1(x) _SB_GETVALUE(x, S_SCD_TRSEQ_EVENT1, M_SCD_TRSEQ_EVENT1)
+
+#define K_SCD_TRSEQ_E0 0
+#define K_SCD_TRSEQ_E1 1
+#define K_SCD_TRSEQ_E2 2
+#define K_SCD_TRSEQ_E3 3
+#define K_SCD_TRSEQ_E0_E1 4
+#define K_SCD_TRSEQ_E1_E2 5
+#define K_SCD_TRSEQ_E2_E3 6
+#define K_SCD_TRSEQ_E0_E1_E2 7
+#define K_SCD_TRSEQ_E0_E1_E2_E3 8
+#define K_SCD_TRSEQ_E0E1 9
+#define K_SCD_TRSEQ_E0E1E2 10
+#define K_SCD_TRSEQ_E0E1E2E3 11
+#define K_SCD_TRSEQ_E0E1_E2 12
+#define K_SCD_TRSEQ_E0E1_E2E3 13
+#define K_SCD_TRSEQ_E0E1_E2_E3 14
+#define K_SCD_TRSEQ_IGNORED 15
+
+#define K_SCD_TRSEQ_TRIGGER_ALL (V_SCD_TRSEQ_EVENT1(K_SCD_TRSEQ_IGNORED) | \
+ V_SCD_TRSEQ_EVENT2(K_SCD_TRSEQ_IGNORED) | \
+ V_SCD_TRSEQ_EVENT3(K_SCD_TRSEQ_IGNORED) | \
+ V_SCD_TRSEQ_EVENT4(K_SCD_TRSEQ_IGNORED))
+
+#define S_SCD_TRSEQ_FUNCTION 16
+#define M_SCD_TRSEQ_FUNCTION _SB_MAKEMASK(4, S_SCD_TRSEQ_FUNCTION)
+#define V_SCD_TRSEQ_FUNCTION(x) _SB_MAKEVALUE(x, S_SCD_TRSEQ_FUNCTION)
+#define G_SCD_TRSEQ_FUNCTION(x) _SB_GETVALUE(x, S_SCD_TRSEQ_FUNCTION, M_SCD_TRSEQ_FUNCTION)
+
+#define K_SCD_TRSEQ_FUNC_NOP 0
+#define K_SCD_TRSEQ_FUNC_START 1
+#define K_SCD_TRSEQ_FUNC_STOP 2
+#define K_SCD_TRSEQ_FUNC_FREEZE 3
+
+#define V_SCD_TRSEQ_FUNC_NOP V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_NOP)
+#define V_SCD_TRSEQ_FUNC_START V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_START)
+#define V_SCD_TRSEQ_FUNC_STOP V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_STOP)
+#define V_SCD_TRSEQ_FUNC_FREEZE V_SCD_TRSEQ_FUNCTION(K_SCD_TRSEQ_FUNC_FREEZE)
+
+#define M_SCD_TRSEQ_ASAMPLE _SB_MAKEMASK1(18)
+#define M_SCD_TRSEQ_DSAMPLE _SB_MAKEMASK1(19)
+#define M_SCD_TRSEQ_DEBUGPIN _SB_MAKEMASK1(20)
+#define M_SCD_TRSEQ_DEBUGCPU _SB_MAKEMASK1(21)
+#define M_SCD_TRSEQ_CLEARUSE _SB_MAKEMASK1(22)
+#define M_SCD_TRSEQ_ALLD_A _SB_MAKEMASK1(23)
+#define M_SCD_TRSEQ_ALL_A _SB_MAKEMASK1(24)
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_smbus.h b/arch/mips/include/asm/sibyte/sb1250_smbus.h
new file mode 100644
index 00000000000..04769923cf1
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_smbus.h
@@ -0,0 +1,204 @@
+/* *********************************************************************
+ * SB1250 Board Support Package
+ *
+ * SMBUS Constants File: sb1250_smbus.h
+ *
+ * This module contains constants and macros useful for
+ * manipulating the SB1250's SMbus devices.
+ *
+ * SB1250 specification level: 10/21/02
+ * BCM1280 specification level: 11/24/03
+ *
+ *********************************************************************
+ *
+ * Copyright 2000,2001,2002,2003
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+
+#ifndef _SB1250_SMBUS_H
+#define _SB1250_SMBUS_H
+
+#include "sb1250_defs.h"
+
+/*
+ * SMBus Clock Frequency Register (Table 14-2)
+ */
+
+#define S_SMB_FREQ_DIV 0
+#define M_SMB_FREQ_DIV _SB_MAKEMASK(13, S_SMB_FREQ_DIV)
+#define V_SMB_FREQ_DIV(x) _SB_MAKEVALUE(x, S_SMB_FREQ_DIV)
+
+#define K_SMB_FREQ_400KHZ 0x1F
+#define K_SMB_FREQ_100KHZ 0x7D
+#define K_SMB_FREQ_10KHZ 1250
+
+#define S_SMB_CMD 0
+#define M_SMB_CMD _SB_MAKEMASK(8, S_SMB_CMD)
+#define V_SMB_CMD(x) _SB_MAKEVALUE(x, S_SMB_CMD)
+
+/*
+ * SMBus control register (Table 14-4)
+ */
+
+#define M_SMB_ERR_INTR _SB_MAKEMASK1(0)
+#define M_SMB_FINISH_INTR _SB_MAKEMASK1(1)
+
+#define S_SMB_DATA_OUT 4
+#define M_SMB_DATA_OUT _SB_MAKEMASK1(S_SMB_DATA_OUT)
+#define V_SMB_DATA_OUT(x) _SB_MAKEVALUE(x, S_SMB_DATA_OUT)
+
+#define M_SMB_DATA_DIR _SB_MAKEMASK1(5)
+#define M_SMB_DATA_DIR_OUTPUT M_SMB_DATA_DIR
+#define M_SMB_CLK_OUT _SB_MAKEMASK1(6)
+#define M_SMB_DIRECT_ENABLE _SB_MAKEMASK1(7)
+
+/*
+ * SMBus status registers (Table 14-5)
+ */
+
+#define M_SMB_BUSY _SB_MAKEMASK1(0)
+#define M_SMB_ERROR _SB_MAKEMASK1(1)
+#define M_SMB_ERROR_TYPE _SB_MAKEMASK1(2)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_SMB_SCL_IN 5
+#define M_SMB_SCL_IN _SB_MAKEMASK1(S_SMB_SCL_IN)
+#define V_SMB_SCL_IN(x) _SB_MAKEVALUE(x, S_SMB_SCL_IN)
+#define G_SMB_SCL_IN(x) _SB_GETVALUE(x, S_SMB_SCL_IN, M_SMB_SCL_IN)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define S_SMB_REF 6
+#define M_SMB_REF _SB_MAKEMASK1(S_SMB_REF)
+#define V_SMB_REF(x) _SB_MAKEVALUE(x, S_SMB_REF)
+#define G_SMB_REF(x) _SB_GETVALUE(x, S_SMB_REF, M_SMB_REF)
+
+#define S_SMB_DATA_IN 7
+#define M_SMB_DATA_IN _SB_MAKEMASK1(S_SMB_DATA_IN)
+#define V_SMB_DATA_IN(x) _SB_MAKEVALUE(x, S_SMB_DATA_IN)
+#define G_SMB_DATA_IN(x) _SB_GETVALUE(x, S_SMB_DATA_IN, M_SMB_DATA_IN)
+
+/*
+ * SMBus Start/Command registers (Table 14-9)
+ */
+
+#define S_SMB_ADDR 0
+#define M_SMB_ADDR _SB_MAKEMASK(7, S_SMB_ADDR)
+#define V_SMB_ADDR(x) _SB_MAKEVALUE(x, S_SMB_ADDR)
+#define G_SMB_ADDR(x) _SB_GETVALUE(x, S_SMB_ADDR, M_SMB_ADDR)
+
+#define M_SMB_QDATA _SB_MAKEMASK1(7)
+
+#define S_SMB_TT 8
+#define M_SMB_TT _SB_MAKEMASK(3, S_SMB_TT)
+#define V_SMB_TT(x) _SB_MAKEVALUE(x, S_SMB_TT)
+#define G_SMB_TT(x) _SB_GETVALUE(x, S_SMB_TT, M_SMB_TT)
+
+#define K_SMB_TT_WR1BYTE 0
+#define K_SMB_TT_WR2BYTE 1
+#define K_SMB_TT_WR3BYTE 2
+#define K_SMB_TT_CMD_RD1BYTE 3
+#define K_SMB_TT_CMD_RD2BYTE 4
+#define K_SMB_TT_RD1BYTE 5
+#define K_SMB_TT_QUICKCMD 6
+#define K_SMB_TT_EEPROMREAD 7
+
+#define V_SMB_TT_WR1BYTE V_SMB_TT(K_SMB_TT_WR1BYTE)
+#define V_SMB_TT_WR2BYTE V_SMB_TT(K_SMB_TT_WR2BYTE)
+#define V_SMB_TT_WR3BYTE V_SMB_TT(K_SMB_TT_WR3BYTE)
+#define V_SMB_TT_CMD_RD1BYTE V_SMB_TT(K_SMB_TT_CMD_RD1BYTE)
+#define V_SMB_TT_CMD_RD2BYTE V_SMB_TT(K_SMB_TT_CMD_RD2BYTE)
+#define V_SMB_TT_RD1BYTE V_SMB_TT(K_SMB_TT_RD1BYTE)
+#define V_SMB_TT_QUICKCMD V_SMB_TT(K_SMB_TT_QUICKCMD)
+#define V_SMB_TT_EEPROMREAD V_SMB_TT(K_SMB_TT_EEPROMREAD)
+
+#define M_SMB_PEC _SB_MAKEMASK1(15)
+
+/*
+ * SMBus Data Register (Table 14-6) and SMBus Extra Register (Table 14-7)
+ */
+
+#define S_SMB_LB 0
+#define M_SMB_LB _SB_MAKEMASK(8, S_SMB_LB)
+#define V_SMB_LB(x) _SB_MAKEVALUE(x, S_SMB_LB)
+
+#define S_SMB_MB 8
+#define M_SMB_MB _SB_MAKEMASK(8, S_SMB_MB)
+#define V_SMB_MB(x) _SB_MAKEVALUE(x, S_SMB_MB)
+
+
+/*
+ * SMBus Packet Error Check register (Table 14-8)
+ */
+
+#define S_SPEC_PEC 0
+#define M_SPEC_PEC _SB_MAKEMASK(8, S_SPEC_PEC)
+#define V_SPEC_MB(x) _SB_MAKEVALUE(x, S_SPEC_PEC)
+
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+
+#define S_SMB_CMDH 8
+#define M_SMB_CMDH _SB_MAKEMASK(8, S_SMB_CMDH)
+#define V_SMB_CMDH(x) _SB_MAKEVALUE(x, S_SMB_CMDH)
+
+#define M_SMB_EXTEND _SB_MAKEMASK1(14)
+
+#define S_SMB_DFMT 8
+#define M_SMB_DFMT _SB_MAKEMASK(3, S_SMB_DFMT)
+#define V_SMB_DFMT(x) _SB_MAKEVALUE(x, S_SMB_DFMT)
+#define G_SMB_DFMT(x) _SB_GETVALUE(x, S_SMB_DFMT, M_SMB_DFMT)
+
+#define K_SMB_DFMT_1BYTE 0
+#define K_SMB_DFMT_2BYTE 1
+#define K_SMB_DFMT_3BYTE 2
+#define K_SMB_DFMT_4BYTE 3
+#define K_SMB_DFMT_NODATA 4
+#define K_SMB_DFMT_CMD4BYTE 5
+#define K_SMB_DFMT_CMD5BYTE 6
+#define K_SMB_DFMT_RESERVED 7
+
+#define V_SMB_DFMT_1BYTE V_SMB_DFMT(K_SMB_DFMT_1BYTE)
+#define V_SMB_DFMT_2BYTE V_SMB_DFMT(K_SMB_DFMT_2BYTE)
+#define V_SMB_DFMT_3BYTE V_SMB_DFMT(K_SMB_DFMT_3BYTE)
+#define V_SMB_DFMT_4BYTE V_SMB_DFMT(K_SMB_DFMT_4BYTE)
+#define V_SMB_DFMT_NODATA V_SMB_DFMT(K_SMB_DFMT_NODATA)
+#define V_SMB_DFMT_CMD4BYTE V_SMB_DFMT(K_SMB_DFMT_CMD4BYTE)
+#define V_SMB_DFMT_CMD5BYTE V_SMB_DFMT(K_SMB_DFMT_CMD5BYTE)
+#define V_SMB_DFMT_RESERVED V_SMB_DFMT(K_SMB_DFMT_RESERVED)
+
+#define S_SMB_AFMT 11
+#define M_SMB_AFMT _SB_MAKEMASK(2, S_SMB_AFMT)
+#define V_SMB_AFMT(x) _SB_MAKEVALUE(x, S_SMB_AFMT)
+#define G_SMB_AFMT(x) _SB_GETVALUE(x, S_SMB_AFMT, M_SMB_AFMT)
+
+#define K_SMB_AFMT_NONE 0
+#define K_SMB_AFMT_ADDR 1
+#define K_SMB_AFMT_ADDR_CMD1BYTE 2
+#define K_SMB_AFMT_ADDR_CMD2BYTE 3
+
+#define V_SMB_AFMT_NONE V_SMB_AFMT(K_SMB_AFMT_NONE)
+#define V_SMB_AFMT_ADDR V_SMB_AFMT(K_SMB_AFMT_ADDR)
+#define V_SMB_AFMT_ADDR_CMD1BYTE V_SMB_AFMT(K_SMB_AFMT_ADDR_CMD1BYTE)
+#define V_SMB_AFMT_ADDR_CMD2BYTE V_SMB_AFMT(K_SMB_AFMT_ADDR_CMD2BYTE)
+
+#define M_SMB_DIR _SB_MAKEMASK1(13)
+
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_syncser.h b/arch/mips/include/asm/sibyte/sb1250_syncser.h
new file mode 100644
index 00000000000..d4b8558e0bf
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_syncser.h
@@ -0,0 +1,146 @@
+/* *********************************************************************
+ * SB1250 Board Support Package
+ *
+ * Synchronous Serial Constants File: sb1250_syncser.h
+ *
+ * This module contains constants and macros useful for
+ * manipulating the SB1250's Synchronous Serial
+ *
+ * SB1250 specification level: User's manual 1/02/02
+ *
+ *********************************************************************
+ *
+ * Copyright 2000,2001,2002,2003
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+
+#ifndef _SB1250_SYNCSER_H
+#define _SB1250_SYNCSER_H
+
+#include "sb1250_defs.h"
+
+/*
+ * Serial Mode Configuration Register
+ */
+
+#define M_SYNCSER_CRC_MODE _SB_MAKEMASK1(0)
+#define M_SYNCSER_MSB_FIRST _SB_MAKEMASK1(1)
+
+#define S_SYNCSER_FLAG_NUM 2
+#define M_SYNCSER_FLAG_NUM _SB_MAKEMASK(4, S_SYNCSER_FLAG_NUM)
+#define V_SYNCSER_FLAG_NUM _SB_MAKEVALUE(x, S_SYNCSER_FLAG_NUM)
+
+#define M_SYNCSER_FLAG_EN _SB_MAKEMASK1(6)
+#define M_SYNCSER_HDLC_EN _SB_MAKEMASK1(7)
+#define M_SYNCSER_LOOP_MODE _SB_MAKEMASK1(8)
+#define M_SYNCSER_LOOPBACK _SB_MAKEMASK1(9)
+
+/*
+ * Serial Clock Source and Line Interface Mode Register
+ */
+
+#define M_SYNCSER_RXCLK_INV _SB_MAKEMASK1(0)
+#define M_SYNCSER_RXCLK_EXT _SB_MAKEMASK1(1)
+
+#define S_SYNCSER_RXSYNC_DLY 2
+#define M_SYNCSER_RXSYNC_DLY _SB_MAKEMASK(2, S_SYNCSER_RXSYNC_DLY)
+#define V_SYNCSER_RXSYNC_DLY(x) _SB_MAKEVALUE(x, S_SYNCSER_RXSYNC_DLY)
+
+#define M_SYNCSER_RXSYNC_LOW _SB_MAKEMASK1(4)
+#define M_SYNCSER_RXSTRB_LOW _SB_MAKEMASK1(5)
+
+#define M_SYNCSER_RXSYNC_EDGE _SB_MAKEMASK1(6)
+#define M_SYNCSER_RXSYNC_INT _SB_MAKEMASK1(7)
+
+#define M_SYNCSER_TXCLK_INV _SB_MAKEMASK1(8)
+#define M_SYNCSER_TXCLK_EXT _SB_MAKEMASK1(9)
+
+#define S_SYNCSER_TXSYNC_DLY 10
+#define M_SYNCSER_TXSYNC_DLY _SB_MAKEMASK(2, S_SYNCSER_TXSYNC_DLY)
+#define V_SYNCSER_TXSYNC_DLY(x) _SB_MAKEVALUE(x, S_SYNCSER_TXSYNC_DLY)
+
+#define M_SYNCSER_TXSYNC_LOW _SB_MAKEMASK1(12)
+#define M_SYNCSER_TXSTRB_LOW _SB_MAKEMASK1(13)
+
+#define M_SYNCSER_TXSYNC_EDGE _SB_MAKEMASK1(14)
+#define M_SYNCSER_TXSYNC_INT _SB_MAKEMASK1(15)
+
+/*
+ * Serial Command Register
+ */
+
+#define M_SYNCSER_CMD_RX_EN _SB_MAKEMASK1(0)
+#define M_SYNCSER_CMD_TX_EN _SB_MAKEMASK1(1)
+#define M_SYNCSER_CMD_RX_RESET _SB_MAKEMASK1(2)
+#define M_SYNCSER_CMD_TX_RESET _SB_MAKEMASK1(3)
+#define M_SYNCSER_CMD_TX_PAUSE _SB_MAKEMASK1(5)
+
+/*
+ * Serial DMA Enable Register
+ */
+
+#define M_SYNCSER_DMA_RX_EN _SB_MAKEMASK1(0)
+#define M_SYNCSER_DMA_TX_EN _SB_MAKEMASK1(4)
+
+/*
+ * Serial Status Register
+ */
+
+#define M_SYNCSER_RX_CRCERR _SB_MAKEMASK1(0)
+#define M_SYNCSER_RX_ABORT _SB_MAKEMASK1(1)
+#define M_SYNCSER_RX_OCTET _SB_MAKEMASK1(2)
+#define M_SYNCSER_RX_LONGFRM _SB_MAKEMASK1(3)
+#define M_SYNCSER_RX_SHORTFRM _SB_MAKEMASK1(4)
+#define M_SYNCSER_RX_OVERRUN _SB_MAKEMASK1(5)
+#define M_SYNCSER_RX_SYNC_ERR _SB_MAKEMASK1(6)
+#define M_SYNCSER_TX_CRCERR _SB_MAKEMASK1(8)
+#define M_SYNCSER_TX_UNDERRUN _SB_MAKEMASK1(9)
+#define M_SYNCSER_TX_SYNC_ERR _SB_MAKEMASK1(10)
+#define M_SYNCSER_TX_PAUSE_COMPLETE _SB_MAKEMASK1(11)
+#define M_SYNCSER_RX_EOP_COUNT _SB_MAKEMASK1(16)
+#define M_SYNCSER_RX_EOP_TIMER _SB_MAKEMASK1(17)
+#define M_SYNCSER_RX_EOP_SEEN _SB_MAKEMASK1(18)
+#define M_SYNCSER_RX_HWM _SB_MAKEMASK1(19)
+#define M_SYNCSER_RX_LWM _SB_MAKEMASK1(20)
+#define M_SYNCSER_RX_DSCR _SB_MAKEMASK1(21)
+#define M_SYNCSER_RX_DERR _SB_MAKEMASK1(22)
+#define M_SYNCSER_TX_EOP_COUNT _SB_MAKEMASK1(24)
+#define M_SYNCSER_TX_EOP_TIMER _SB_MAKEMASK1(25)
+#define M_SYNCSER_TX_EOP_SEEN _SB_MAKEMASK1(26)
+#define M_SYNCSER_TX_HWM _SB_MAKEMASK1(27)
+#define M_SYNCSER_TX_LWM _SB_MAKEMASK1(28)
+#define M_SYNCSER_TX_DSCR _SB_MAKEMASK1(29)
+#define M_SYNCSER_TX_DERR _SB_MAKEMASK1(30)
+#define M_SYNCSER_TX_DZERO _SB_MAKEMASK1(31)
+
+/*
+ * Sequencer Table Entry format
+ */
+
+#define M_SYNCSER_SEQ_LAST _SB_MAKEMASK1(0)
+#define M_SYNCSER_SEQ_BYTE _SB_MAKEMASK1(1)
+
+#define S_SYNCSER_SEQ_COUNT 2
+#define M_SYNCSER_SEQ_COUNT _SB_MAKEMASK(4, S_SYNCSER_SEQ_COUNT)
+#define V_SYNCSER_SEQ_COUNT(x) _SB_MAKEVALUE(x, S_SYNCSER_SEQ_COUNT)
+
+#define M_SYNCSER_SEQ_ENABLE _SB_MAKEMASK1(6)
+#define M_SYNCSER_SEQ_STROBE _SB_MAKEMASK1(7)
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sb1250_uart.h b/arch/mips/include/asm/sibyte/sb1250_uart.h
new file mode 100644
index 00000000000..d835bf28014
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sb1250_uart.h
@@ -0,0 +1,362 @@
+/* *********************************************************************
+ * SB1250 Board Support Package
+ *
+ * UART Constants File: sb1250_uart.h
+ *
+ * This module contains constants and macros useful for
+ * manipulating the SB1250's UARTs
+ *
+ * SB1250 specification level: User's manual 1/02/02
+ *
+ *********************************************************************
+ *
+ * Copyright 2000,2001,2002,2003
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+
+#ifndef _SB1250_UART_H
+#define _SB1250_UART_H
+
+#include "sb1250_defs.h"
+
+/* **********************************************************************
+ * DUART Registers
+ ********************************************************************** */
+
+/*
+ * DUART Mode Register #1 (Table 10-3)
+ * Register: DUART_MODE_REG_1_A
+ * Register: DUART_MODE_REG_1_B
+ */
+
+#define S_DUART_BITS_PER_CHAR 0
+#define M_DUART_BITS_PER_CHAR _SB_MAKEMASK(2, S_DUART_BITS_PER_CHAR)
+#define V_DUART_BITS_PER_CHAR(x) _SB_MAKEVALUE(x, S_DUART_BITS_PER_CHAR)
+
+#define K_DUART_BITS_PER_CHAR_RSV0 0
+#define K_DUART_BITS_PER_CHAR_RSV1 1
+#define K_DUART_BITS_PER_CHAR_7 2
+#define K_DUART_BITS_PER_CHAR_8 3
+
+#define V_DUART_BITS_PER_CHAR_RSV0 V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_RSV0)
+#define V_DUART_BITS_PER_CHAR_RSV1 V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_RSV1)
+#define V_DUART_BITS_PER_CHAR_7 V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_7)
+#define V_DUART_BITS_PER_CHAR_8 V_DUART_BITS_PER_CHAR(K_DUART_BITS_PER_CHAR_8)
+
+
+#define M_DUART_PARITY_TYPE_EVEN 0x00
+#define M_DUART_PARITY_TYPE_ODD _SB_MAKEMASK1(2)
+
+#define S_DUART_PARITY_MODE 3
+#define M_DUART_PARITY_MODE _SB_MAKEMASK(2, S_DUART_PARITY_MODE)
+#define V_DUART_PARITY_MODE(x) _SB_MAKEVALUE(x, S_DUART_PARITY_MODE)
+
+#define K_DUART_PARITY_MODE_ADD 0
+#define K_DUART_PARITY_MODE_ADD_FIXED 1
+#define K_DUART_PARITY_MODE_NONE 2
+
+#define V_DUART_PARITY_MODE_ADD V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_ADD)
+#define V_DUART_PARITY_MODE_ADD_FIXED V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_ADD_FIXED)
+#define V_DUART_PARITY_MODE_NONE V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_NONE)
+
+#define M_DUART_TX_IRQ_SEL_TXRDY 0
+#define M_DUART_TX_IRQ_SEL_TXEMPT _SB_MAKEMASK1(5)
+
+#define M_DUART_RX_IRQ_SEL_RXRDY 0
+#define M_DUART_RX_IRQ_SEL_RXFULL _SB_MAKEMASK1(6)
+
+#define M_DUART_RX_RTS_ENA _SB_MAKEMASK1(7)
+
+/*
+ * DUART Mode Register #2 (Table 10-4)
+ * Register: DUART_MODE_REG_2_A
+ * Register: DUART_MODE_REG_2_B
+ */
+
+#define M_DUART_MODE_RESERVED1 _SB_MAKEMASK(3, 0) /* ignored */
+
+#define M_DUART_STOP_BIT_LEN_2 _SB_MAKEMASK1(3)
+#define M_DUART_STOP_BIT_LEN_1 0
+
+#define M_DUART_TX_CTS_ENA _SB_MAKEMASK1(4)
+
+
+#define M_DUART_MODE_RESERVED2 _SB_MAKEMASK1(5) /* must be zero */
+
+#define S_DUART_CHAN_MODE 6
+#define M_DUART_CHAN_MODE _SB_MAKEMASK(2, S_DUART_CHAN_MODE)
+#define V_DUART_CHAN_MODE(x) _SB_MAKEVALUE(x, S_DUART_CHAN_MODE)
+
+#define K_DUART_CHAN_MODE_NORMAL 0
+#define K_DUART_CHAN_MODE_LCL_LOOP 2
+#define K_DUART_CHAN_MODE_REM_LOOP 3
+
+#define V_DUART_CHAN_MODE_NORMAL V_DUART_CHAN_MODE(K_DUART_CHAN_MODE_NORMAL)
+#define V_DUART_CHAN_MODE_LCL_LOOP V_DUART_CHAN_MODE(K_DUART_CHAN_MODE_LCL_LOOP)
+#define V_DUART_CHAN_MODE_REM_LOOP V_DUART_CHAN_MODE(K_DUART_CHAN_MODE_REM_LOOP)
+
+/*
+ * DUART Command Register (Table 10-5)
+ * Register: DUART_CMD_A
+ * Register: DUART_CMD_B
+ */
+
+#define M_DUART_RX_EN _SB_MAKEMASK1(0)
+#define M_DUART_RX_DIS _SB_MAKEMASK1(1)
+#define M_DUART_TX_EN _SB_MAKEMASK1(2)
+#define M_DUART_TX_DIS _SB_MAKEMASK1(3)
+
+#define S_DUART_MISC_CMD 4
+#define M_DUART_MISC_CMD _SB_MAKEMASK(3, S_DUART_MISC_CMD)
+#define V_DUART_MISC_CMD(x) _SB_MAKEVALUE(x, S_DUART_MISC_CMD)
+
+#define K_DUART_MISC_CMD_NOACTION0 0
+#define K_DUART_MISC_CMD_NOACTION1 1
+#define K_DUART_MISC_CMD_RESET_RX 2
+#define K_DUART_MISC_CMD_RESET_TX 3
+#define K_DUART_MISC_CMD_NOACTION4 4
+#define K_DUART_MISC_CMD_RESET_BREAK_INT 5
+#define K_DUART_MISC_CMD_START_BREAK 6
+#define K_DUART_MISC_CMD_STOP_BREAK 7
+
+#define V_DUART_MISC_CMD_NOACTION0 V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION0)
+#define V_DUART_MISC_CMD_NOACTION1 V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION1)
+#define V_DUART_MISC_CMD_RESET_RX V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_RX)
+#define V_DUART_MISC_CMD_RESET_TX V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_TX)
+#define V_DUART_MISC_CMD_NOACTION4 V_DUART_MISC_CMD(K_DUART_MISC_CMD_NOACTION4)
+#define V_DUART_MISC_CMD_RESET_BREAK_INT V_DUART_MISC_CMD(K_DUART_MISC_CMD_RESET_BREAK_INT)
+#define V_DUART_MISC_CMD_START_BREAK V_DUART_MISC_CMD(K_DUART_MISC_CMD_START_BREAK)
+#define V_DUART_MISC_CMD_STOP_BREAK V_DUART_MISC_CMD(K_DUART_MISC_CMD_STOP_BREAK)
+
+#define M_DUART_CMD_RESERVED _SB_MAKEMASK1(7)
+
+/*
+ * DUART Status Register (Table 10-6)
+ * Register: DUART_STATUS_A
+ * Register: DUART_STATUS_B
+ * READ-ONLY
+ */
+
+#define M_DUART_RX_RDY _SB_MAKEMASK1(0)
+#define M_DUART_RX_FFUL _SB_MAKEMASK1(1)
+#define M_DUART_TX_RDY _SB_MAKEMASK1(2)
+#define M_DUART_TX_EMT _SB_MAKEMASK1(3)
+#define M_DUART_OVRUN_ERR _SB_MAKEMASK1(4)
+#define M_DUART_PARITY_ERR _SB_MAKEMASK1(5)
+#define M_DUART_FRM_ERR _SB_MAKEMASK1(6)
+#define M_DUART_RCVD_BRK _SB_MAKEMASK1(7)
+
+/*
+ * DUART Baud Rate Register (Table 10-7)
+ * Register: DUART_CLK_SEL_A
+ * Register: DUART_CLK_SEL_B
+ */
+
+#define M_DUART_CLK_COUNTER _SB_MAKEMASK(12, 0)
+#define V_DUART_BAUD_RATE(x) (100000000/((x)*20)-1)
+
+/*
+ * DUART Data Registers (Table 10-8 and 10-9)
+ * Register: DUART_RX_HOLD_A
+ * Register: DUART_RX_HOLD_B
+ * Register: DUART_TX_HOLD_A
+ * Register: DUART_TX_HOLD_B
+ */
+
+#define M_DUART_RX_DATA _SB_MAKEMASK(8, 0)
+#define M_DUART_TX_DATA _SB_MAKEMASK(8, 0)
+
+/*
+ * DUART Input Port Register (Table 10-10)
+ * Register: DUART_IN_PORT
+ */
+
+#define M_DUART_IN_PIN0_VAL _SB_MAKEMASK1(0)
+#define M_DUART_IN_PIN1_VAL _SB_MAKEMASK1(1)
+#define M_DUART_IN_PIN2_VAL _SB_MAKEMASK1(2)
+#define M_DUART_IN_PIN3_VAL _SB_MAKEMASK1(3)
+#define M_DUART_IN_PIN4_VAL _SB_MAKEMASK1(4)
+#define M_DUART_IN_PIN5_VAL _SB_MAKEMASK1(5)
+#define M_DUART_RIN0_PIN _SB_MAKEMASK1(6)
+#define M_DUART_RIN1_PIN _SB_MAKEMASK1(7)
+
+/*
+ * DUART Input Port Change Status Register (Tables 10-11, 10-12, and 10-13)
+ * Register: DUART_INPORT_CHNG
+ */
+
+#define S_DUART_IN_PIN_VAL 0
+#define M_DUART_IN_PIN_VAL _SB_MAKEMASK(4, S_DUART_IN_PIN_VAL)
+
+#define S_DUART_IN_PIN_CHNG 4
+#define M_DUART_IN_PIN_CHNG _SB_MAKEMASK(4, S_DUART_IN_PIN_CHNG)
+
+
+/*
+ * DUART Output port control register (Table 10-14)
+ * Register: DUART_OPCR
+ */
+
+#define M_DUART_OPCR_RESERVED0 _SB_MAKEMASK1(0) /* must be zero */
+#define M_DUART_OPC2_SEL _SB_MAKEMASK1(1)
+#define M_DUART_OPCR_RESERVED1 _SB_MAKEMASK1(2) /* must be zero */
+#define M_DUART_OPC3_SEL _SB_MAKEMASK1(3)
+#define M_DUART_OPCR_RESERVED2 _SB_MAKEMASK(4, 4) /* must be zero */
+
+/*
+ * DUART Aux Control Register (Table 10-15)
+ * Register: DUART_AUX_CTRL
+ */
+
+#define M_DUART_IP0_CHNG_ENA _SB_MAKEMASK1(0)
+#define M_DUART_IP1_CHNG_ENA _SB_MAKEMASK1(1)
+#define M_DUART_IP2_CHNG_ENA _SB_MAKEMASK1(2)
+#define M_DUART_IP3_CHNG_ENA _SB_MAKEMASK1(3)
+#define M_DUART_ACR_RESERVED _SB_MAKEMASK(4, 4)
+
+#define M_DUART_CTS_CHNG_ENA _SB_MAKEMASK1(0)
+#define M_DUART_CIN_CHNG_ENA _SB_MAKEMASK1(2)
+
+/*
+ * DUART Interrupt Status Register (Table 10-16)
+ * Register: DUART_ISR
+ */
+
+#define M_DUART_ISR_TX_A _SB_MAKEMASK1(0)
+
+#define S_DUART_ISR_RX_A 1
+#define M_DUART_ISR_RX_A _SB_MAKEMASK1(S_DUART_ISR_RX_A)
+#define V_DUART_ISR_RX_A(x) _SB_MAKEVALUE(x, S_DUART_ISR_RX_A)
+#define G_DUART_ISR_RX_A(x) _SB_GETVALUE(x, S_DUART_ISR_RX_A, M_DUART_ISR_RX_A)
+
+#define M_DUART_ISR_BRK_A _SB_MAKEMASK1(2)
+#define M_DUART_ISR_IN_A _SB_MAKEMASK1(3)
+#define M_DUART_ISR_ALL_A _SB_MAKEMASK(4, 0)
+
+#define M_DUART_ISR_TX_B _SB_MAKEMASK1(4)
+#define M_DUART_ISR_RX_B _SB_MAKEMASK1(5)
+#define M_DUART_ISR_BRK_B _SB_MAKEMASK1(6)
+#define M_DUART_ISR_IN_B _SB_MAKEMASK1(7)
+#define M_DUART_ISR_ALL_B _SB_MAKEMASK(4, 4)
+
+/*
+ * DUART Channel A Interrupt Status Register (Table 10-17)
+ * DUART Channel B Interrupt Status Register (Table 10-18)
+ * Register: DUART_ISR_A
+ * Register: DUART_ISR_B
+ */
+
+#define M_DUART_ISR_TX _SB_MAKEMASK1(0)
+#define M_DUART_ISR_RX _SB_MAKEMASK1(1)
+#define M_DUART_ISR_BRK _SB_MAKEMASK1(2)
+#define M_DUART_ISR_IN _SB_MAKEMASK1(3)
+#define M_DUART_ISR_ALL _SB_MAKEMASK(4, 0)
+#define M_DUART_ISR_RESERVED _SB_MAKEMASK(4, 4)
+
+/*
+ * DUART Interrupt Mask Register (Table 10-19)
+ * Register: DUART_IMR
+ */
+
+#define M_DUART_IMR_TX_A _SB_MAKEMASK1(0)
+#define M_DUART_IMR_RX_A _SB_MAKEMASK1(1)
+#define M_DUART_IMR_BRK_A _SB_MAKEMASK1(2)
+#define M_DUART_IMR_IN_A _SB_MAKEMASK1(3)
+#define M_DUART_IMR_ALL_A _SB_MAKEMASK(4, 0)
+
+#define M_DUART_IMR_TX_B _SB_MAKEMASK1(4)
+#define M_DUART_IMR_RX_B _SB_MAKEMASK1(5)
+#define M_DUART_IMR_BRK_B _SB_MAKEMASK1(6)
+#define M_DUART_IMR_IN_B _SB_MAKEMASK1(7)
+#define M_DUART_IMR_ALL_B _SB_MAKEMASK(4, 4)
+
+/*
+ * DUART Channel A Interrupt Mask Register (Table 10-20)
+ * DUART Channel B Interrupt Mask Register (Table 10-21)
+ * Register: DUART_IMR_A
+ * Register: DUART_IMR_B
+ */
+
+#define M_DUART_IMR_TX _SB_MAKEMASK1(0)
+#define M_DUART_IMR_RX _SB_MAKEMASK1(1)
+#define M_DUART_IMR_BRK _SB_MAKEMASK1(2)
+#define M_DUART_IMR_IN _SB_MAKEMASK1(3)
+#define M_DUART_IMR_ALL _SB_MAKEMASK(4, 0)
+#define M_DUART_IMR_RESERVED _SB_MAKEMASK(4, 4)
+
+
+/*
+ * DUART Output Port Set Register (Table 10-22)
+ * Register: DUART_SET_OPR
+ */
+
+#define M_DUART_SET_OPR0 _SB_MAKEMASK1(0)
+#define M_DUART_SET_OPR1 _SB_MAKEMASK1(1)
+#define M_DUART_SET_OPR2 _SB_MAKEMASK1(2)
+#define M_DUART_SET_OPR3 _SB_MAKEMASK1(3)
+#define M_DUART_OPSR_RESERVED _SB_MAKEMASK(4, 4)
+
+/*
+ * DUART Output Port Clear Register (Table 10-23)
+ * Register: DUART_CLEAR_OPR
+ */
+
+#define M_DUART_CLR_OPR0 _SB_MAKEMASK1(0)
+#define M_DUART_CLR_OPR1 _SB_MAKEMASK1(1)
+#define M_DUART_CLR_OPR2 _SB_MAKEMASK1(2)
+#define M_DUART_CLR_OPR3 _SB_MAKEMASK1(3)
+#define M_DUART_OPCR_RESERVED _SB_MAKEMASK(4, 4)
+
+/*
+ * DUART Output Port RTS Register (Table 10-24)
+ * Register: DUART_OUT_PORT
+ */
+
+#define M_DUART_OUT_PIN_SET0 _SB_MAKEMASK1(0)
+#define M_DUART_OUT_PIN_SET1 _SB_MAKEMASK1(1)
+#define M_DUART_OUT_PIN_CLR0 _SB_MAKEMASK1(2)
+#define M_DUART_OUT_PIN_CLR1 _SB_MAKEMASK1(3)
+#define M_DUART_OPRR_RESERVED _SB_MAKEMASK(4, 4)
+
+#define M_DUART_OUT_PIN_SET(chan) \
+ (chan == 0 ? M_DUART_OUT_PIN_SET0 : M_DUART_OUT_PIN_SET1)
+#define M_DUART_OUT_PIN_CLR(chan) \
+ (chan == 0 ? M_DUART_OUT_PIN_CLR0 : M_DUART_OUT_PIN_CLR1)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+/*
+ * Full Interrupt Control Register
+ */
+
+#define S_DUART_SIG_FULL _SB_MAKE64(0)
+#define M_DUART_SIG_FULL _SB_MAKEMASK(4, S_DUART_SIG_FULL)
+#define V_DUART_SIG_FULL(x) _SB_MAKEVALUE(x, S_DUART_SIG_FULL)
+#define G_DUART_SIG_FULL(x) _SB_GETVALUE(x, S_DUART_SIG_FULL, M_DUART_SIG_FULL)
+
+#define S_DUART_INT_TIME _SB_MAKE64(4)
+#define M_DUART_INT_TIME _SB_MAKEMASK(4, S_DUART_INT_TIME)
+#define V_DUART_INT_TIME(x) _SB_MAKEVALUE(x, S_DUART_INT_TIME)
+#define G_DUART_INT_TIME(x) _SB_GETVALUE(x, S_DUART_INT_TIME, M_DUART_INT_TIME)
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+
+/* ********************************************************************** */
+
+
+#endif
diff --git a/arch/mips/include/asm/sibyte/sentosa.h b/arch/mips/include/asm/sibyte/sentosa.h
new file mode 100644
index 00000000000..64c47874f32
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/sentosa.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#ifndef __ASM_SIBYTE_SENTOSA_H
+#define __ASM_SIBYTE_SENTOSA_H
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_int.h>
+
+#ifdef CONFIG_SIBYTE_SENTOSA
+#define SIBYTE_BOARD_NAME "BCM91250E (Sentosa)"
+#endif
+#ifdef CONFIG_SIBYTE_RHONE
+#define SIBYTE_BOARD_NAME "BCM91125E (Rhone)"
+#endif
+
+/* Generic bus chip selects */
+#ifdef CONFIG_SIBYTE_RHONE
+#define LEDS_CS 6
+#define LEDS_PHYS 0x1d0a0000
+#endif
+
+/* GPIOs */
+#define K_GPIO_DBG_LED 0
+
+#endif /* __ASM_SIBYTE_SENTOSA_H */
diff --git a/arch/mips/include/asm/sibyte/swarm.h b/arch/mips/include/asm/sibyte/swarm.h
new file mode 100644
index 00000000000..114d9d29ca9
--- /dev/null
+++ b/arch/mips/include/asm/sibyte/swarm.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#ifndef __ASM_SIBYTE_SWARM_H
+#define __ASM_SIBYTE_SWARM_H
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_int.h>
+
+#ifdef CONFIG_SIBYTE_SWARM
+#define SIBYTE_BOARD_NAME "BCM91250A (SWARM)"
+#define SIBYTE_HAVE_PCMCIA 1
+#define SIBYTE_HAVE_IDE 1
+#endif
+#ifdef CONFIG_SIBYTE_LITTLESUR
+#define SIBYTE_BOARD_NAME "BCM91250C2 (LittleSur)"
+#define SIBYTE_HAVE_PCMCIA 0
+#define SIBYTE_HAVE_IDE 1
+#define SIBYTE_DEFAULT_CONSOLE "cfe0"
+#endif
+#ifdef CONFIG_SIBYTE_CRHONE
+#define SIBYTE_BOARD_NAME "BCM91125C (CRhone)"
+#define SIBYTE_HAVE_PCMCIA 0
+#define SIBYTE_HAVE_IDE 0
+#endif
+#ifdef CONFIG_SIBYTE_CRHINE
+#define SIBYTE_BOARD_NAME "BCM91120C (CRhine)"
+#define SIBYTE_HAVE_PCMCIA 0
+#define SIBYTE_HAVE_IDE 0
+#endif
+
+/* Generic bus chip selects */
+#define LEDS_CS 3
+#define LEDS_PHYS 0x100a0000
+
+#ifdef SIBYTE_HAVE_IDE
+#define IDE_CS 4
+#define IDE_PHYS 0x100b0000
+#define K_GPIO_GB_IDE 4
+#define K_INT_GB_IDE (K_INT_GPIO_0 + K_GPIO_GB_IDE)
+#endif
+
+#ifdef SIBYTE_HAVE_PCMCIA
+#define PCMCIA_CS 6
+#define PCMCIA_PHYS 0x11000000
+#define K_GPIO_PC_READY 9
+#define K_INT_PC_READY (K_INT_GPIO_0 + K_GPIO_PC_READY)
+#endif
+
+#endif /* __ASM_SIBYTE_SWARM_H */
diff --git a/arch/mips/include/asm/sigcontext.h b/arch/mips/include/asm/sigcontext.h
new file mode 100644
index 00000000000..9ce0607d7a4
--- /dev/null
+++ b/arch/mips/include/asm/sigcontext.h
@@ -0,0 +1,100 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1997, 1999 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SIGCONTEXT_H
+#define _ASM_SIGCONTEXT_H
+
+#include <asm/sgidefs.h>
+
+#if _MIPS_SIM == _MIPS_SIM_ABI32
+
+/*
+ * Keep this struct definition in sync with the sigcontext fragment
+ * in arch/mips/tools/offset.c
+ */
+struct sigcontext {
+ unsigned int sc_regmask; /* Unused */
+ unsigned int sc_status; /* Unused */
+ unsigned long long sc_pc;
+ unsigned long long sc_regs[32];
+ unsigned long long sc_fpregs[32];
+ unsigned int sc_acx; /* Was sc_ownedfp */
+ unsigned int sc_fpc_csr;
+ unsigned int sc_fpc_eir; /* Unused */
+ unsigned int sc_used_math;
+ unsigned int sc_dsp; /* dsp status, was sc_ssflags */
+ unsigned long long sc_mdhi;
+ unsigned long long sc_mdlo;
+ unsigned long sc_hi1; /* Was sc_cause */
+ unsigned long sc_lo1; /* Was sc_badvaddr */
+ unsigned long sc_hi2; /* Was sc_sigset[4] */
+ unsigned long sc_lo2;
+ unsigned long sc_hi3;
+ unsigned long sc_lo3;
+};
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
+
+#if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32
+
+#include <linux/posix_types.h>
+/*
+ * Keep this struct definition in sync with the sigcontext fragment
+ * in arch/mips/tools/offset.c
+ *
+ * Warning: this structure illdefined with sc_badvaddr being just an unsigned
+ * int so it was changed to unsigned long in 2.6.0-test1. This may break
+ * binary compatibility - no prisoners.
+ * DSP ASE in 2.6.12-rc4. Turn sc_mdhi and sc_mdlo into an array of four
+ * entries, add sc_dsp and sc_reserved for padding. No prisoners.
+ */
+struct sigcontext {
+ __u64 sc_regs[32];
+ __u64 sc_fpregs[32];
+ __u64 sc_mdhi;
+ __u64 sc_hi1;
+ __u64 sc_hi2;
+ __u64 sc_hi3;
+ __u64 sc_mdlo;
+ __u64 sc_lo1;
+ __u64 sc_lo2;
+ __u64 sc_lo3;
+ __u64 sc_pc;
+ __u32 sc_fpc_csr;
+ __u32 sc_used_math;
+ __u32 sc_dsp;
+ __u32 sc_reserved;
+};
+
+#ifdef __KERNEL__
+
+struct sigcontext32 {
+ __u32 sc_regmask; /* Unused */
+ __u32 sc_status; /* Unused */
+ __u64 sc_pc;
+ __u64 sc_regs[32];
+ __u64 sc_fpregs[32];
+ __u32 sc_acx; /* Only MIPS32; was sc_ownedfp */
+ __u32 sc_fpc_csr;
+ __u32 sc_fpc_eir; /* Unused */
+ __u32 sc_used_math;
+ __u32 sc_dsp; /* dsp status, was sc_ssflags */
+ __u64 sc_mdhi;
+ __u64 sc_mdlo;
+ __u32 sc_hi1; /* Was sc_cause */
+ __u32 sc_lo1; /* Was sc_badvaddr */
+ __u32 sc_hi2; /* Was sc_sigset[4] */
+ __u32 sc_lo2;
+ __u32 sc_hi3;
+ __u32 sc_lo3;
+};
+#endif /* __KERNEL__ */
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 */
+
+#endif /* _ASM_SIGCONTEXT_H */
diff --git a/arch/mips/include/asm/siginfo.h b/arch/mips/include/asm/siginfo.h
new file mode 100644
index 00000000000..96e28f18dad
--- /dev/null
+++ b/arch/mips/include/asm/siginfo.h
@@ -0,0 +1,130 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 1999, 2001, 2003 Ralf Baechle
+ * Copyright (C) 2000, 2001 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SIGINFO_H
+#define _ASM_SIGINFO_H
+
+
+#define __ARCH_SIGEV_PREAMBLE_SIZE (sizeof(long) + 2*sizeof(int))
+#undef __ARCH_SI_TRAPNO /* exception code needs to fill this ... */
+
+#define HAVE_ARCH_SIGINFO_T
+
+/*
+ * We duplicate the generic versions - <asm-generic/siginfo.h> is just borked
+ * by design ...
+ */
+#define HAVE_ARCH_COPY_SIGINFO
+struct siginfo;
+
+/*
+ * Careful to keep union _sifields from shifting ...
+ */
+#ifdef CONFIG_32BIT
+#define __ARCH_SI_PREAMBLE_SIZE (3 * sizeof(int))
+#endif
+#ifdef CONFIG_64BIT
+#define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int))
+#endif
+
+#include <asm-generic/siginfo.h>
+
+typedef struct siginfo {
+ int si_signo;
+ int si_code;
+ int si_errno;
+ int __pad0[SI_MAX_SIZE / sizeof(int) - SI_PAD_SIZE - 3];
+
+ union {
+ int _pad[SI_PAD_SIZE];
+
+ /* kill() */
+ struct {
+ pid_t _pid; /* sender's pid */
+ __ARCH_SI_UID_T _uid; /* sender's uid */
+ } _kill;
+
+ /* POSIX.1b timers */
+ struct {
+ timer_t _tid; /* timer id */
+ int _overrun; /* overrun count */
+ char _pad[sizeof( __ARCH_SI_UID_T) - sizeof(int)];
+ sigval_t _sigval; /* same as below */
+ int _sys_private; /* not to be passed to user */
+ } _timer;
+
+ /* POSIX.1b signals */
+ struct {
+ pid_t _pid; /* sender's pid */
+ __ARCH_SI_UID_T _uid; /* sender's uid */
+ sigval_t _sigval;
+ } _rt;
+
+ /* SIGCHLD */
+ struct {
+ pid_t _pid; /* which child */
+ __ARCH_SI_UID_T _uid; /* sender's uid */
+ int _status; /* exit code */
+ clock_t _utime;
+ clock_t _stime;
+ } _sigchld;
+
+ /* IRIX SIGCHLD */
+ struct {
+ pid_t _pid; /* which child */
+ clock_t _utime;
+ int _status; /* exit code */
+ clock_t _stime;
+ } _irix_sigchld;
+
+ /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+ struct {
+ void __user *_addr; /* faulting insn/memory ref. */
+#ifdef __ARCH_SI_TRAPNO
+ int _trapno; /* TRAP # which caused the signal */
+#endif
+ } _sigfault;
+
+ /* SIGPOLL, SIGXFSZ (To do ...) */
+ struct {
+ __ARCH_SI_BAND_T _band; /* POLL_IN, POLL_OUT, POLL_MSG */
+ int _fd;
+ } _sigpoll;
+ } _sifields;
+} siginfo_t;
+
+/*
+ * si_code values
+ * Again these have been choosen to be IRIX compatible.
+ */
+#undef SI_ASYNCIO
+#undef SI_TIMER
+#undef SI_MESGQ
+#define SI_ASYNCIO -2 /* sent by AIO completion */
+#define SI_TIMER __SI_CODE(__SI_TIMER, -3) /* sent by timer expiration */
+#define SI_MESGQ __SI_CODE(__SI_MESGQ, -4) /* sent by real time mesq state change */
+
+#ifdef __KERNEL__
+
+/*
+ * Duplicated here because of <asm-generic/siginfo.h> braindamage ...
+ */
+#include <linux/string.h>
+
+static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
+{
+ if (from->si_code < 0)
+ memcpy(to, from, sizeof(*to));
+ else
+ /* _sigchld is currently the largest know union member */
+ memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
+}
+
+#endif
+
+#endif /* _ASM_SIGINFO_H */
diff --git a/arch/mips/include/asm/signal.h b/arch/mips/include/asm/signal.h
new file mode 100644
index 00000000000..bee5153aca4
--- /dev/null
+++ b/arch/mips/include/asm/signal.h
@@ -0,0 +1,139 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 96, 97, 98, 99, 2003 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SIGNAL_H
+#define _ASM_SIGNAL_H
+
+#include <linux/types.h>
+
+#define _NSIG 128
+#define _NSIG_BPW (sizeof(unsigned long) * 8)
+#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
+
+typedef struct {
+ unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+typedef unsigned long old_sigset_t; /* at least 32 bits */
+
+#define SIGHUP 1 /* Hangup (POSIX). */
+#define SIGINT 2 /* Interrupt (ANSI). */
+#define SIGQUIT 3 /* Quit (POSIX). */
+#define SIGILL 4 /* Illegal instruction (ANSI). */
+#define SIGTRAP 5 /* Trace trap (POSIX). */
+#define SIGIOT 6 /* IOT trap (4.2 BSD). */
+#define SIGABRT SIGIOT /* Abort (ANSI). */
+#define SIGEMT 7
+#define SIGFPE 8 /* Floating-point exception (ANSI). */
+#define SIGKILL 9 /* Kill, unblockable (POSIX). */
+#define SIGBUS 10 /* BUS error (4.2 BSD). */
+#define SIGSEGV 11 /* Segmentation violation (ANSI). */
+#define SIGSYS 12
+#define SIGPIPE 13 /* Broken pipe (POSIX). */
+#define SIGALRM 14 /* Alarm clock (POSIX). */
+#define SIGTERM 15 /* Termination (ANSI). */
+#define SIGUSR1 16 /* User-defined signal 1 (POSIX). */
+#define SIGUSR2 17 /* User-defined signal 2 (POSIX). */
+#define SIGCHLD 18 /* Child status has changed (POSIX). */
+#define SIGCLD SIGCHLD /* Same as SIGCHLD (System V). */
+#define SIGPWR 19 /* Power failure restart (System V). */
+#define SIGWINCH 20 /* Window size change (4.3 BSD, Sun). */
+#define SIGURG 21 /* Urgent condition on socket (4.2 BSD). */
+#define SIGIO 22 /* I/O now possible (4.2 BSD). */
+#define SIGPOLL SIGIO /* Pollable event occurred (System V). */
+#define SIGSTOP 23 /* Stop, unblockable (POSIX). */
+#define SIGTSTP 24 /* Keyboard stop (POSIX). */
+#define SIGCONT 25 /* Continue (POSIX). */
+#define SIGTTIN 26 /* Background read from tty (POSIX). */
+#define SIGTTOU 27 /* Background write to tty (POSIX). */
+#define SIGVTALRM 28 /* Virtual alarm clock (4.2 BSD). */
+#define SIGPROF 29 /* Profiling alarm clock (4.2 BSD). */
+#define SIGXCPU 30 /* CPU limit exceeded (4.2 BSD). */
+#define SIGXFSZ 31 /* File size limit exceeded (4.2 BSD). */
+
+/* These should not be considered constants from userland. */
+#define SIGRTMIN 32
+#define SIGRTMAX _NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_ONSTACK 0x08000000
+#define SA_RESETHAND 0x80000000
+#define SA_RESTART 0x10000000
+#define SA_SIGINFO 0x00000008
+#define SA_NODEFER 0x40000000
+#define SA_NOCLDWAIT 0x00010000
+#define SA_NOCLDSTOP 0x00000001
+
+#define SA_NOMASK SA_NODEFER
+#define SA_ONESHOT SA_RESETHAND
+
+#define SA_RESTORER 0x04000000 /* Only for o32 */
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK 1
+#define SS_DISABLE 2
+
+#define MINSIGSTKSZ 2048
+#define SIGSTKSZ 8192
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_TRAD_SIGNALS
+#define sig_uses_siginfo(ka) ((ka)->sa.sa_flags & SA_SIGINFO)
+#else
+#define sig_uses_siginfo(ka) (1)
+#endif
+
+#endif /* __KERNEL__ */
+
+#define SIG_BLOCK 1 /* for blocking signals */
+#define SIG_UNBLOCK 2 /* for unblocking signals */
+#define SIG_SETMASK 3 /* for setting the signal mask */
+
+#include <asm-generic/signal.h>
+
+struct sigaction {
+ unsigned int sa_flags;
+ __sighandler_t sa_handler;
+ sigset_t sa_mask;
+};
+
+struct k_sigaction {
+ struct sigaction sa;
+};
+
+/* IRIX compatible stack_t */
+typedef struct sigaltstack {
+ void __user *ss_sp;
+ size_t ss_size;
+ int ss_flags;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+#include <asm/siginfo.h>
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_SIGNAL_H */
diff --git a/arch/mips/include/asm/sim.h b/arch/mips/include/asm/sim.h
new file mode 100644
index 00000000000..0cd719fabb5
--- /dev/null
+++ b/arch/mips/include/asm/sim.h
@@ -0,0 +1,82 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999, 2000, 2003 Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SIM_H
+#define _ASM_SIM_H
+
+
+#include <asm/asm-offsets.h>
+
+#define __str2(x) #x
+#define __str(x) __str2(x)
+
+#ifdef CONFIG_32BIT
+
+#define save_static_function(symbol) \
+__asm__( \
+ ".text\n\t" \
+ ".globl\t" #symbol "\n\t" \
+ ".align\t2\n\t" \
+ ".type\t" #symbol ", @function\n\t" \
+ ".ent\t" #symbol ", 0\n" \
+ #symbol":\n\t" \
+ ".frame\t$29, 0, $31\n\t" \
+ "sw\t$16,"__str(PT_R16)"($29)\t\t\t# save_static_function\n\t" \
+ "sw\t$17,"__str(PT_R17)"($29)\n\t" \
+ "sw\t$18,"__str(PT_R18)"($29)\n\t" \
+ "sw\t$19,"__str(PT_R19)"($29)\n\t" \
+ "sw\t$20,"__str(PT_R20)"($29)\n\t" \
+ "sw\t$21,"__str(PT_R21)"($29)\n\t" \
+ "sw\t$22,"__str(PT_R22)"($29)\n\t" \
+ "sw\t$23,"__str(PT_R23)"($29)\n\t" \
+ "sw\t$30,"__str(PT_R30)"($29)\n\t" \
+ "j\t_" #symbol "\n\t" \
+ ".end\t" #symbol "\n\t" \
+ ".size\t" #symbol",. - " #symbol)
+
+#define nabi_no_regargs
+
+#endif /* CONFIG_32BIT */
+
+#ifdef CONFIG_64BIT
+
+#define save_static_function(symbol) \
+__asm__( \
+ ".text\n\t" \
+ ".globl\t" #symbol "\n\t" \
+ ".align\t2\n\t" \
+ ".type\t" #symbol ", @function\n\t" \
+ ".ent\t" #symbol ", 0\n" \
+ #symbol":\n\t" \
+ ".frame\t$29, 0, $31\n\t" \
+ "sd\t$16,"__str(PT_R16)"($29)\t\t\t# save_static_function\n\t" \
+ "sd\t$17,"__str(PT_R17)"($29)\n\t" \
+ "sd\t$18,"__str(PT_R18)"($29)\n\t" \
+ "sd\t$19,"__str(PT_R19)"($29)\n\t" \
+ "sd\t$20,"__str(PT_R20)"($29)\n\t" \
+ "sd\t$21,"__str(PT_R21)"($29)\n\t" \
+ "sd\t$22,"__str(PT_R22)"($29)\n\t" \
+ "sd\t$23,"__str(PT_R23)"($29)\n\t" \
+ "sd\t$30,"__str(PT_R30)"($29)\n\t" \
+ "j\t_" #symbol "\n\t" \
+ ".end\t" #symbol "\n\t" \
+ ".size\t" #symbol",. - " #symbol)
+
+#define nabi_no_regargs \
+ unsigned long __dummy0, \
+ unsigned long __dummy1, \
+ unsigned long __dummy2, \
+ unsigned long __dummy3, \
+ unsigned long __dummy4, \
+ unsigned long __dummy5, \
+ unsigned long __dummy6, \
+ unsigned long __dummy7,
+
+#endif /* CONFIG_64BIT */
+
+#endif /* _ASM_SIM_H */
diff --git a/arch/mips/include/asm/smp-ops.h b/arch/mips/include/asm/smp-ops.h
new file mode 100644
index 00000000000..43c207e72a6
--- /dev/null
+++ b/arch/mips/include/asm/smp-ops.h
@@ -0,0 +1,57 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * Copyright (C) 2000 - 2001 by Kanoj Sarcar (kanoj@sgi.com)
+ * Copyright (C) 2000 - 2001 by Silicon Graphics, Inc.
+ * Copyright (C) 2000, 2001, 2002 Ralf Baechle
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ */
+#ifndef __ASM_SMP_OPS_H
+#define __ASM_SMP_OPS_H
+
+#ifdef CONFIG_SMP
+
+#include <linux/cpumask.h>
+
+struct plat_smp_ops {
+ void (*send_ipi_single)(int cpu, unsigned int action);
+ void (*send_ipi_mask)(cpumask_t mask, unsigned int action);
+ void (*init_secondary)(void);
+ void (*smp_finish)(void);
+ void (*cpus_done)(void);
+ void (*boot_secondary)(int cpu, struct task_struct *idle);
+ void (*smp_setup)(void);
+ void (*prepare_cpus)(unsigned int max_cpus);
+};
+
+extern void register_smp_ops(struct plat_smp_ops *ops);
+
+static inline void plat_smp_setup(void)
+{
+ extern struct plat_smp_ops *mp_ops; /* private */
+
+ mp_ops->smp_setup();
+}
+
+#else /* !CONFIG_SMP */
+
+struct plat_smp_ops;
+
+static inline void plat_smp_setup(void)
+{
+ /* UP, nothing to do ... */
+}
+
+static inline void register_smp_ops(struct plat_smp_ops *ops)
+{
+}
+
+#endif /* !CONFIG_SMP */
+
+extern struct plat_smp_ops up_smp_ops;
+extern struct plat_smp_ops cmp_smp_ops;
+extern struct plat_smp_ops vsmp_smp_ops;
+
+#endif /* __ASM_SMP_OPS_H */
diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h
new file mode 100644
index 00000000000..0ff5b523ea7
--- /dev/null
+++ b/arch/mips/include/asm/smp.h
@@ -0,0 +1,63 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * Copyright (C) 2000 - 2001 by Kanoj Sarcar (kanoj@sgi.com)
+ * Copyright (C) 2000 - 2001 by Silicon Graphics, Inc.
+ * Copyright (C) 2000, 2001, 2002 Ralf Baechle
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ */
+#ifndef __ASM_SMP_H
+#define __ASM_SMP_H
+
+#include <linux/bitops.h>
+#include <linux/linkage.h>
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+
+#include <asm/atomic.h>
+#include <asm/smp-ops.h>
+
+extern int smp_num_siblings;
+extern cpumask_t cpu_sibling_map[];
+
+#define raw_smp_processor_id() (current_thread_info()->cpu)
+
+/* Map from cpu id to sequential logical cpu number. This will only
+ not be idempotent when cpus failed to come on-line. */
+extern int __cpu_number_map[NR_CPUS];
+#define cpu_number_map(cpu) __cpu_number_map[cpu]
+
+/* The reverse map from sequential logical cpu number to cpu id. */
+extern int __cpu_logical_map[NR_CPUS];
+#define cpu_logical_map(cpu) __cpu_logical_map[cpu]
+
+#define NO_PROC_ID (-1)
+
+#define SMP_RESCHEDULE_YOURSELF 0x1 /* XXX braindead */
+#define SMP_CALL_FUNCTION 0x2
+
+extern cpumask_t phys_cpu_present_map;
+#define cpu_possible_map phys_cpu_present_map
+
+extern void asmlinkage smp_bootstrap(void);
+
+/*
+ * this function sends a 'reschedule' IPI to another CPU.
+ * it goes straight through and wastes no time serializing
+ * anything. Worst case is that we lose a reschedule ...
+ */
+static inline void smp_send_reschedule(int cpu)
+{
+ extern struct plat_smp_ops *mp_ops; /* private */
+
+ mp_ops->send_ipi_single(cpu, SMP_RESCHEDULE_YOURSELF);
+}
+
+extern asmlinkage void smp_call_function_interrupt(void);
+
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi(cpumask_t mask);
+
+#endif /* __ASM_SMP_H */
diff --git a/arch/mips/include/asm/smtc.h b/arch/mips/include/asm/smtc.h
new file mode 100644
index 00000000000..ea60bf08dcb
--- /dev/null
+++ b/arch/mips/include/asm/smtc.h
@@ -0,0 +1,71 @@
+#ifndef _ASM_SMTC_MT_H
+#define _ASM_SMTC_MT_H
+
+/*
+ * Definitions for SMTC multitasking on MIPS MT cores
+ */
+
+#include <asm/mips_mt.h>
+#include <asm/smtc_ipi.h>
+
+/*
+ * System-wide SMTC status information
+ */
+
+extern unsigned int smtc_status;
+
+#define SMTC_TLB_SHARED 0x00000001
+#define SMTC_MTC_ACTIVE 0x00000002
+
+/*
+ * TLB/ASID Management information
+ */
+
+#define MAX_SMTC_TLBS 2
+#define MAX_SMTC_ASIDS 256
+#if NR_CPUS <= 8
+typedef char asiduse;
+#else
+#if NR_CPUS <= 16
+typedef short asiduse;
+#else
+typedef long asiduse;
+#endif
+#endif
+
+extern asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS];
+
+struct mm_struct;
+struct task_struct;
+
+void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu);
+void self_ipi(struct smtc_ipi *);
+void smtc_flush_tlb_asid(unsigned long asid);
+extern int smtc_build_cpu_map(int startslot);
+extern void smtc_prepare_cpus(int cpus);
+extern void smtc_smp_finish(void);
+extern void smtc_boot_secondary(int cpu, struct task_struct *t);
+extern void smtc_cpus_done(void);
+
+
+/*
+ * Sharing the TLB between multiple VPEs means that the
+ * "random" index selection function is not allowed to
+ * select the current value of the Index register. To
+ * avoid additional TLB pressure, the Index registers
+ * are "parked" with an non-Valid value.
+ */
+
+#define PARKED_INDEX ((unsigned int)0x80000000)
+
+/*
+ * Define low-level interrupt mask for IPIs, if necessary.
+ * By default, use SW interrupt 1, which requires no external
+ * hardware support, but which works only for single-core
+ * MIPS MT systems.
+ */
+#ifndef MIPS_CPU_IPI_IRQ
+#define MIPS_CPU_IPI_IRQ 1
+#endif
+
+#endif /* _ASM_SMTC_MT_H */
diff --git a/arch/mips/include/asm/smtc_ipi.h b/arch/mips/include/asm/smtc_ipi.h
new file mode 100644
index 00000000000..8ce51757434
--- /dev/null
+++ b/arch/mips/include/asm/smtc_ipi.h
@@ -0,0 +1,128 @@
+/*
+ * Definitions used in MIPS MT SMTC "Interprocessor Interrupt" code.
+ */
+#ifndef __ASM_SMTC_IPI_H
+#define __ASM_SMTC_IPI_H
+
+#include <linux/spinlock.h>
+
+//#define SMTC_IPI_DEBUG
+
+#ifdef SMTC_IPI_DEBUG
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#endif /* SMTC_IPI_DEBUG */
+
+/*
+ * An IPI "message"
+ */
+
+struct smtc_ipi {
+ struct smtc_ipi *flink;
+ int type;
+ void *arg;
+ int dest;
+#ifdef SMTC_IPI_DEBUG
+ int sender;
+ long stamp;
+#endif /* SMTC_IPI_DEBUG */
+};
+
+/*
+ * Defined IPI Types
+ */
+
+#define LINUX_SMP_IPI 1
+#define SMTC_CLOCK_TICK 2
+#define IRQ_AFFINITY_IPI 3
+
+/*
+ * A queue of IPI messages
+ */
+
+struct smtc_ipi_q {
+ struct smtc_ipi *head;
+ spinlock_t lock;
+ struct smtc_ipi *tail;
+ int depth;
+};
+
+static inline void smtc_ipi_nq(struct smtc_ipi_q *q, struct smtc_ipi *p)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&q->lock, flags);
+ if (q->head == NULL)
+ q->head = q->tail = p;
+ else
+ q->tail->flink = p;
+ p->flink = NULL;
+ q->tail = p;
+ q->depth++;
+#ifdef SMTC_IPI_DEBUG
+ p->sender = read_c0_tcbind();
+ p->stamp = read_c0_count();
+#endif /* SMTC_IPI_DEBUG */
+ spin_unlock_irqrestore(&q->lock, flags);
+}
+
+static inline struct smtc_ipi *__smtc_ipi_dq(struct smtc_ipi_q *q)
+{
+ struct smtc_ipi *p;
+
+ if (q->head == NULL)
+ p = NULL;
+ else {
+ p = q->head;
+ q->head = q->head->flink;
+ q->depth--;
+ /* Arguably unnecessary, but leaves queue cleaner */
+ if (q->head == NULL)
+ q->tail = NULL;
+ }
+
+ return p;
+}
+
+static inline struct smtc_ipi *smtc_ipi_dq(struct smtc_ipi_q *q)
+{
+ unsigned long flags;
+ struct smtc_ipi *p;
+
+ spin_lock_irqsave(&q->lock, flags);
+ p = __smtc_ipi_dq(q);
+ spin_unlock_irqrestore(&q->lock, flags);
+
+ return p;
+}
+
+static inline void smtc_ipi_req(struct smtc_ipi_q *q, struct smtc_ipi *p)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&q->lock, flags);
+ if (q->head == NULL) {
+ q->head = q->tail = p;
+ p->flink = NULL;
+ } else {
+ p->flink = q->head;
+ q->head = p;
+ }
+ q->depth++;
+ spin_unlock_irqrestore(&q->lock, flags);
+}
+
+static inline int smtc_ipi_qdepth(struct smtc_ipi_q *q)
+{
+ unsigned long flags;
+ int retval;
+
+ spin_lock_irqsave(&q->lock, flags);
+ retval = q->depth;
+ spin_unlock_irqrestore(&q->lock, flags);
+ return retval;
+}
+
+extern void smtc_send_ipi(int cpu, int type, unsigned int action);
+
+#endif /* __ASM_SMTC_IPI_H */
diff --git a/arch/mips/include/asm/smtc_proc.h b/arch/mips/include/asm/smtc_proc.h
new file mode 100644
index 00000000000..25da651f1f5
--- /dev/null
+++ b/arch/mips/include/asm/smtc_proc.h
@@ -0,0 +1,23 @@
+/*
+ * Definitions for SMTC /proc entries
+ * Copyright(C) 2005 MIPS Technologies Inc.
+ */
+#ifndef __ASM_SMTC_PROC_H
+#define __ASM_SMTC_PROC_H
+
+/*
+ * per-"CPU" statistics
+ */
+
+struct smtc_cpu_proc {
+ unsigned long timerints;
+ unsigned long selfipis;
+};
+
+extern struct smtc_cpu_proc smtc_cpu_stats[NR_CPUS];
+
+/* Count of number of recoveries of "stolen" FPU access rights on 34K */
+
+extern atomic_t smtc_fpu_recoveries;
+
+#endif /* __ASM_SMTC_PROC_H */
diff --git a/arch/mips/include/asm/smvp.h b/arch/mips/include/asm/smvp.h
new file mode 100644
index 00000000000..0d0e80a39e8
--- /dev/null
+++ b/arch/mips/include/asm/smvp.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_SMVP_H
+#define _ASM_SMVP_H
+
+/*
+ * Definitions for SMVP multitasking on MIPS MT cores
+ */
+struct task_struct;
+
+extern void smvp_smp_setup(void);
+extern void smvp_smp_finish(void);
+extern void smvp_boot_secondary(int cpu, struct task_struct *t);
+extern void smvp_init_secondary(void);
+extern void smvp_smp_finish(void);
+extern void smvp_cpus_done(void);
+extern void smvp_prepare_cpus(unsigned int max_cpus);
+
+/* This is platform specific */
+extern void smvp_send_ipi(int cpu, unsigned int action);
+#endif /* _ASM_SMVP_H */
diff --git a/arch/mips/include/asm/sn/addrs.h b/arch/mips/include/asm/sn/addrs.h
new file mode 100644
index 00000000000..fec9bdd3491
--- /dev/null
+++ b/arch/mips/include/asm/sn/addrs.h
@@ -0,0 +1,430 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 1999, 2000 by Ralf Baechle
+ */
+#ifndef _ASM_SN_ADDRS_H
+#define _ASM_SN_ADDRS_H
+
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#endif /* !__ASSEMBLY__ */
+
+#include <asm/addrspace.h>
+#include <asm/sn/kldir.h>
+
+#if defined(CONFIG_SGI_IP27)
+#include <asm/sn/sn0/addrs.h>
+#elif defined(CONFIG_SGI_IP35)
+#include <asm/sn/sn1/addrs.h>
+#endif
+
+
+#ifndef __ASSEMBLY__
+
+#define PS_UINT_CAST (unsigned long)
+#define UINT64_CAST (unsigned long)
+
+#define HUBREG_CAST (volatile hubreg_t *)
+
+#else /* __ASSEMBLY__ */
+
+#define PS_UINT_CAST
+#define UINT64_CAST
+#define HUBREG_CAST
+
+#endif /* __ASSEMBLY__ */
+
+
+#define NASID_GET_META(_n) ((_n) >> NASID_LOCAL_BITS)
+#ifdef CONFIG_SGI_IP27
+#define NASID_GET_LOCAL(_n) ((_n) & 0xf)
+#endif
+#define NASID_MAKE(_m, _l) (((_m) << NASID_LOCAL_BITS) | (_l))
+
+#define NODE_ADDRSPACE_MASK (NODE_ADDRSPACE_SIZE - 1)
+#define TO_NODE_ADDRSPACE(_pa) (UINT64_CAST (_pa) & NODE_ADDRSPACE_MASK)
+
+#define CHANGE_ADDR_NASID(_pa, _nasid) \
+ ((UINT64_CAST(_pa) & ~NASID_MASK) | \
+ (UINT64_CAST(_nasid) << NASID_SHFT))
+
+
+/*
+ * The following macros are used to index to the beginning of a specific
+ * node's address space.
+ */
+
+#define NODE_OFFSET(_n) (UINT64_CAST (_n) << NODE_SIZE_BITS)
+
+#define NODE_CAC_BASE(_n) (CAC_BASE + NODE_OFFSET(_n))
+#define NODE_HSPEC_BASE(_n) (HSPEC_BASE + NODE_OFFSET(_n))
+#define NODE_IO_BASE(_n) (IO_BASE + NODE_OFFSET(_n))
+#define NODE_MSPEC_BASE(_n) (MSPEC_BASE + NODE_OFFSET(_n))
+#define NODE_UNCAC_BASE(_n) (UNCAC_BASE + NODE_OFFSET(_n))
+
+#define TO_NODE(_n, _x) (NODE_OFFSET(_n) | ((_x) ))
+#define TO_NODE_CAC(_n, _x) (NODE_CAC_BASE(_n) | ((_x) & TO_PHYS_MASK))
+#define TO_NODE_UNCAC(_n, _x) (NODE_UNCAC_BASE(_n) | ((_x) & TO_PHYS_MASK))
+#define TO_NODE_MSPEC(_n, _x) (NODE_MSPEC_BASE(_n) | ((_x) & TO_PHYS_MASK))
+#define TO_NODE_HSPEC(_n, _x) (NODE_HSPEC_BASE(_n) | ((_x) & TO_PHYS_MASK))
+
+
+#define RAW_NODE_SWIN_BASE(nasid, widget) \
+ (NODE_IO_BASE(nasid) + (UINT64_CAST(widget) << SWIN_SIZE_BITS))
+
+#define WIDGETID_GET(addr) ((unsigned char)((addr >> SWIN_SIZE_BITS) & 0xff))
+
+/*
+ * The following definitions pertain to the IO special address
+ * space. They define the location of the big and little windows
+ * of any given node.
+ */
+
+#define SWIN_SIZE_BITS 24
+#define SWIN_SIZE (UINT64_CAST 1 << 24)
+#define SWIN_SIZEMASK (SWIN_SIZE - 1)
+#define SWIN_WIDGET_MASK 0xF
+
+/*
+ * Convert smallwindow address to xtalk address.
+ *
+ * 'addr' can be physical or virtual address, but will be converted
+ * to Xtalk address in the range 0 -> SWINZ_SIZEMASK
+ */
+#define SWIN_WIDGETADDR(addr) ((addr) & SWIN_SIZEMASK)
+#define SWIN_WIDGETNUM(addr) (((addr) >> SWIN_SIZE_BITS) & SWIN_WIDGET_MASK)
+/*
+ * Verify if addr belongs to small window address on node with "nasid"
+ *
+ *
+ * NOTE: "addr" is expected to be XKPHYS address, and NOT physical
+ * address
+ *
+ *
+ */
+#define NODE_SWIN_ADDR(nasid, addr) \
+ (((addr) >= NODE_SWIN_BASE(nasid, 0)) && \
+ ((addr) < (NODE_SWIN_BASE(nasid, HUB_NUM_WIDGET) + SWIN_SIZE)\
+ ))
+
+/*
+ * The following define the major position-independent aliases used
+ * in SN.
+ * UALIAS -- 256MB in size, reads in the UALIAS result in
+ * uncached references to the memory of the reader's node.
+ * CPU_UALIAS -- 128kb in size, the bottom part of UALIAS is flipped
+ * depending on which CPU does the access to provide
+ * all CPUs with unique uncached memory at low addresses.
+ * LBOOT -- 256MB in size, reads in the LBOOT area result in
+ * uncached references to the local hub's boot prom and
+ * other directory-bus connected devices.
+ * IALIAS -- 8MB in size, reads in the IALIAS result in uncached
+ * references to the local hub's registers.
+ */
+
+#define UALIAS_BASE HSPEC_BASE
+#define UALIAS_SIZE 0x10000000 /* 256 Megabytes */
+#define UALIAS_LIMIT (UALIAS_BASE + UALIAS_SIZE)
+
+/*
+ * The bottom of ualias space is flipped depending on whether you're
+ * processor 0 or 1 within a node.
+ */
+#ifdef CONFIG_SGI_IP27
+#define UALIAS_FLIP_BASE UALIAS_BASE
+#define UALIAS_FLIP_SIZE 0x20000
+#define UALIAS_FLIP_BIT 0x10000
+#define UALIAS_FLIP_ADDR(_x) (cputoslice(smp_processor_id()) ? \
+ (_x) ^ UALIAS_FLIP_BIT : (_x))
+
+#define LBOOT_BASE (HSPEC_BASE + 0x10000000)
+#define LBOOT_SIZE 0x10000000
+#define LBOOT_LIMIT (LBOOT_BASE + LBOOT_SIZE)
+#define LBOOT_STRIDE 0 /* IP27 has only one CPU PROM */
+
+#endif
+
+#define HUB_REGISTER_WIDGET 1
+#define IALIAS_BASE NODE_SWIN_BASE(0, HUB_REGISTER_WIDGET)
+#define IALIAS_SIZE 0x800000 /* 8 Megabytes */
+#define IS_IALIAS(_a) (((_a) >= IALIAS_BASE) && \
+ ((_a) < (IALIAS_BASE + IALIAS_SIZE)))
+
+/*
+ * Macro for referring to Hub's RBOOT space
+ */
+
+#ifdef CONFIG_SGI_IP27
+#define RBOOT_SIZE 0x10000000 /* 256 Megabytes */
+#define NODE_RBOOT_BASE(_n) (NODE_HSPEC_BASE(_n) + 0x30000000)
+#define NODE_RBOOT_LIMIT(_n) (NODE_RBOOT_BASE(_n) + RBOOT_SIZE)
+
+#endif
+
+/*
+ * Macros for referring the Hub's back door space
+ *
+ * These macros correctly process addresses in any node's space.
+ * WARNING: They won't work in assembler.
+ *
+ * BDDIR_ENTRY_LO returns the address of the low double-word of the dir
+ * entry corresponding to a physical (Cac or Uncac) address.
+ * BDDIR_ENTRY_HI returns the address of the high double-word of the entry.
+ * BDPRT_ENTRY returns the address of the double-word protection entry
+ * corresponding to the page containing the physical address.
+ * BDPRT_ENTRY_S Stores the value into the protection entry.
+ * BDPRT_ENTRY_L Load the value from the protection entry.
+ * BDECC_ENTRY returns the address of the ECC byte corresponding to a
+ * double-word at a specified physical address.
+ * BDECC_ENTRY_H returns the address of the two ECC bytes corresponding to a
+ * quad-word at a specified physical address.
+ */
+#define NODE_BDOOR_BASE(_n) (NODE_HSPEC_BASE(_n) + (NODE_ADDRSPACE_SIZE/2))
+
+#define NODE_BDECC_BASE(_n) (NODE_BDOOR_BASE(_n))
+#define NODE_BDDIR_BASE(_n) (NODE_BDOOR_BASE(_n) + (NODE_ADDRSPACE_SIZE/4))
+#ifdef CONFIG_SGI_IP27
+#define BDDIR_ENTRY_LO(_pa) ((HSPEC_BASE + \
+ NODE_ADDRSPACE_SIZE * 3 / 4 + \
+ 0x200) | \
+ UINT64_CAST(_pa) & NASID_MASK | \
+ UINT64_CAST(_pa) >> 2 & BDDIR_UPPER_MASK | \
+ UINT64_CAST(_pa) >> 3 & 0x1f << 4)
+
+#define BDDIR_ENTRY_HI(_pa) ((HSPEC_BASE + \
+ NODE_ADDRSPACE_SIZE * 3 / 4 + \
+ 0x208) | \
+ UINT64_CAST(_pa) & NASID_MASK | \
+ UINT64_CAST(_pa) >> 2 & BDDIR_UPPER_MASK | \
+ UINT64_CAST(_pa) >> 3 & 0x1f << 4)
+
+#define BDPRT_ENTRY(_pa, _rgn) ((HSPEC_BASE + \
+ NODE_ADDRSPACE_SIZE * 3 / 4) | \
+ UINT64_CAST(_pa) & NASID_MASK | \
+ UINT64_CAST(_pa) >> 2 & BDDIR_UPPER_MASK | \
+ (_rgn) << 3)
+#define BDPRT_ENTRY_ADDR(_pa, _rgn) (BDPRT_ENTRY((_pa), (_rgn)))
+#define BDPRT_ENTRY_S(_pa, _rgn, _val) (*(__psunsigned_t *)BDPRT_ENTRY((_pa), (_rgn))=(_val))
+#define BDPRT_ENTRY_L(_pa, _rgn) (*(__psunsigned_t *)BDPRT_ENTRY((_pa), (_rgn)))
+
+#define BDECC_ENTRY(_pa) ((HSPEC_BASE + \
+ NODE_ADDRSPACE_SIZE / 2) | \
+ UINT64_CAST(_pa) & NASID_MASK | \
+ UINT64_CAST(_pa) >> 2 & BDECC_UPPER_MASK | \
+ UINT64_CAST(_pa) >> 3 & 3)
+
+/*
+ * Macro to convert a back door directory or protection address into the
+ * raw physical address of the associated cache line or protection page.
+ */
+#define BDADDR_IS_DIR(_ba) ((UINT64_CAST (_ba) & 0x200) != 0)
+#define BDADDR_IS_PRT(_ba) ((UINT64_CAST (_ba) & 0x200) == 0)
+
+#define BDDIR_TO_MEM(_ba) (UINT64_CAST (_ba) & NASID_MASK | \
+ (UINT64_CAST(_ba) & BDDIR_UPPER_MASK)<<2 | \
+ (UINT64_CAST(_ba) & 0x1f << 4) << 3)
+
+#define BDPRT_TO_MEM(_ba) (UINT64_CAST (_ba) & NASID_MASK | \
+ (UINT64_CAST(_ba) & BDDIR_UPPER_MASK)<<2)
+
+#define BDECC_TO_MEM(_ba) (UINT64_CAST (_ba) & NASID_MASK | \
+ (UINT64_CAST(_ba) & BDECC_UPPER_MASK)<<2 | \
+ (UINT64_CAST(_ba) & 3) << 3)
+#endif /* CONFIG_SGI_IP27 */
+
+
+/*
+ * The following macros produce the correct base virtual address for
+ * the hub registers. The LOCAL_HUB_* macros produce the appropriate
+ * address for the local registers. The REMOTE_HUB_* macro produce
+ * the address for the specified hub's registers. The intent is
+ * that the appropriate PI, MD, NI, or II register would be substituted
+ * for _x.
+ */
+
+/*
+ * WARNING:
+ * When certain Hub chip workaround are defined, it's not sufficient
+ * to dereference the *_HUB_ADDR() macros. You should instead use
+ * HUB_L() and HUB_S() if you must deal with pointers to hub registers.
+ * Otherwise, the recommended approach is to use *_HUB_L() and *_HUB_S().
+ * They're always safe.
+ */
+#define LOCAL_HUB_ADDR(_x) (HUBREG_CAST (IALIAS_BASE + (_x)))
+#define REMOTE_HUB_ADDR(_n, _x) (HUBREG_CAST (NODE_SWIN_BASE(_n, 1) + \
+ 0x800000 + (_x)))
+#ifdef CONFIG_SGI_IP27
+#define REMOTE_HUB_PI_ADDR(_n, _sn, _x) (HUBREG_CAST (NODE_SWIN_BASE(_n, 1) + \
+ 0x800000 + (_x)))
+#endif /* CONFIG_SGI_IP27 */
+
+#ifndef __ASSEMBLY__
+
+#define HUB_L(_a) *(_a)
+#define HUB_S(_a, _d) *(_a) = (_d)
+
+#define LOCAL_HUB_L(_r) HUB_L(LOCAL_HUB_ADDR(_r))
+#define LOCAL_HUB_S(_r, _d) HUB_S(LOCAL_HUB_ADDR(_r), (_d))
+#define REMOTE_HUB_L(_n, _r) HUB_L(REMOTE_HUB_ADDR((_n), (_r)))
+#define REMOTE_HUB_S(_n, _r, _d) HUB_S(REMOTE_HUB_ADDR((_n), (_r)), (_d))
+#define REMOTE_HUB_PI_L(_n, _sn, _r) HUB_L(REMOTE_HUB_PI_ADDR((_n), (_sn), (_r)))
+#define REMOTE_HUB_PI_S(_n, _sn, _r, _d) HUB_S(REMOTE_HUB_PI_ADDR((_n), (_sn), (_r)), (_d))
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * The following macros are used to get to a hub/bridge register, given
+ * the base of the register space.
+ */
+#define HUB_REG_PTR(_base, _off) \
+ (HUBREG_CAST((__psunsigned_t)(_base) + (__psunsigned_t)(_off)))
+
+#define HUB_REG_PTR_L(_base, _off) \
+ HUB_L(HUB_REG_PTR((_base), (_off)))
+
+#define HUB_REG_PTR_S(_base, _off, _data) \
+ HUB_S(HUB_REG_PTR((_base), (_off)), (_data))
+
+/*
+ * Software structure locations -- permanently fixed
+ * See diagram in kldir.h
+ */
+
+#define PHYS_RAMBASE 0x0
+#define K0_RAMBASE PHYS_TO_K0(PHYS_RAMBASE)
+
+#define EX_HANDLER_OFFSET(slice) ((slice) << 16)
+#define EX_HANDLER_ADDR(nasid, slice) \
+ PHYS_TO_K0(NODE_OFFSET(nasid) | EX_HANDLER_OFFSET(slice))
+#define EX_HANDLER_SIZE 0x0400
+
+#define EX_FRAME_OFFSET(slice) ((slice) << 16 | 0x400)
+#define EX_FRAME_ADDR(nasid, slice) \
+ PHYS_TO_K0(NODE_OFFSET(nasid) | EX_FRAME_OFFSET(slice))
+#define EX_FRAME_SIZE 0x0c00
+
+#define ARCS_SPB_OFFSET 0x1000
+#define ARCS_SPB_ADDR(nasid) \
+ PHYS_TO_K0(NODE_OFFSET(nasid) | ARCS_SPB_OFFSET)
+#define ARCS_SPB_SIZE 0x0400
+
+#define KLDIR_OFFSET 0x2000
+#define KLDIR_ADDR(nasid) \
+ TO_NODE_UNCAC((nasid), KLDIR_OFFSET)
+#define KLDIR_SIZE 0x0400
+
+
+/*
+ * Software structure locations -- indirected through KLDIR
+ * See diagram in kldir.h
+ *
+ * Important: All low memory structures must only be accessed
+ * uncached, except for the symmon stacks.
+ */
+
+#define KLI_LAUNCH 0 /* Dir. entries */
+#define KLI_KLCONFIG 1
+#define KLI_NMI 2
+#define KLI_GDA 3
+#define KLI_FREEMEM 4
+#define KLI_SYMMON_STK 5
+#define KLI_PI_ERROR 6
+#define KLI_KERN_VARS 7
+#define KLI_KERN_XP 8
+#define KLI_KERN_PARTID 9
+
+#ifndef __ASSEMBLY__
+
+#define KLD_BASE(nasid) ((kldir_ent_t *) KLDIR_ADDR(nasid))
+#define KLD_LAUNCH(nasid) (KLD_BASE(nasid) + KLI_LAUNCH)
+#define KLD_NMI(nasid) (KLD_BASE(nasid) + KLI_NMI)
+#define KLD_KLCONFIG(nasid) (KLD_BASE(nasid) + KLI_KLCONFIG)
+#define KLD_PI_ERROR(nasid) (KLD_BASE(nasid) + KLI_PI_ERROR)
+#define KLD_GDA(nasid) (KLD_BASE(nasid) + KLI_GDA)
+#define KLD_SYMMON_STK(nasid) (KLD_BASE(nasid) + KLI_SYMMON_STK)
+#define KLD_FREEMEM(nasid) (KLD_BASE(nasid) + KLI_FREEMEM)
+#define KLD_KERN_VARS(nasid) (KLD_BASE(nasid) + KLI_KERN_VARS)
+#define KLD_KERN_XP(nasid) (KLD_BASE(nasid) + KLI_KERN_XP)
+#define KLD_KERN_PARTID(nasid) (KLD_BASE(nasid) + KLI_KERN_PARTID)
+
+#define LAUNCH_OFFSET(nasid, slice) \
+ (KLD_LAUNCH(nasid)->offset + \
+ KLD_LAUNCH(nasid)->stride * (slice))
+#define LAUNCH_ADDR(nasid, slice) \
+ TO_NODE_UNCAC((nasid), LAUNCH_OFFSET(nasid, slice))
+#define LAUNCH_SIZE(nasid) KLD_LAUNCH(nasid)->size
+
+#define NMI_OFFSET(nasid, slice) \
+ (KLD_NMI(nasid)->offset + \
+ KLD_NMI(nasid)->stride * (slice))
+#define NMI_ADDR(nasid, slice) \
+ TO_NODE_UNCAC((nasid), NMI_OFFSET(nasid, slice))
+#define NMI_SIZE(nasid) KLD_NMI(nasid)->size
+
+#define KLCONFIG_OFFSET(nasid) KLD_KLCONFIG(nasid)->offset
+#define KLCONFIG_ADDR(nasid) \
+ TO_NODE_UNCAC((nasid), KLCONFIG_OFFSET(nasid))
+#define KLCONFIG_SIZE(nasid) KLD_KLCONFIG(nasid)->size
+
+#define GDA_ADDR(nasid) KLD_GDA(nasid)->pointer
+#define GDA_SIZE(nasid) KLD_GDA(nasid)->size
+
+#define SYMMON_STK_OFFSET(nasid, slice) \
+ (KLD_SYMMON_STK(nasid)->offset + \
+ KLD_SYMMON_STK(nasid)->stride * (slice))
+#define SYMMON_STK_STRIDE(nasid) KLD_SYMMON_STK(nasid)->stride
+
+#define SYMMON_STK_ADDR(nasid, slice) \
+ TO_NODE_CAC((nasid), SYMMON_STK_OFFSET(nasid, slice))
+
+#define SYMMON_STK_SIZE(nasid) KLD_SYMMON_STK(nasid)->stride
+
+#define SYMMON_STK_END(nasid) (SYMMON_STK_ADDR(nasid, 0) + KLD_SYMMON_STK(nasid)->size)
+
+/* loading symmon 4k below UNIX. the arcs loader needs the topaddr for a
+ * relocatable program
+ */
+#define UNIX_DEBUG_LOADADDR 0x300000
+#define SYMMON_LOADADDR(nasid) \
+ TO_NODE(nasid, PHYS_TO_K0(UNIX_DEBUG_LOADADDR - 0x1000))
+
+#define FREEMEM_OFFSET(nasid) KLD_FREEMEM(nasid)->offset
+#define FREEMEM_ADDR(nasid) SYMMON_STK_END(nasid)
+/*
+ * XXX
+ * Fix this. FREEMEM_ADDR should be aware of if symmon is loaded.
+ * Also, it should take into account what prom thinks to be a safe
+ * address
+ PHYS_TO_K0(NODE_OFFSET(nasid) + FREEMEM_OFFSET(nasid))
+ */
+#define FREEMEM_SIZE(nasid) KLD_FREEMEM(nasid)->size
+
+#define PI_ERROR_OFFSET(nasid) KLD_PI_ERROR(nasid)->offset
+#define PI_ERROR_ADDR(nasid) \
+ TO_NODE_UNCAC((nasid), PI_ERROR_OFFSET(nasid))
+#define PI_ERROR_SIZE(nasid) KLD_PI_ERROR(nasid)->size
+
+#define NODE_OFFSET_TO_K0(_nasid, _off) \
+ PHYS_TO_K0((NODE_OFFSET(_nasid) + (_off)) | CAC_BASE)
+#define NODE_OFFSET_TO_K1(_nasid, _off) \
+ TO_UNCAC((NODE_OFFSET(_nasid) + (_off)) | UNCAC_BASE)
+#define K0_TO_NODE_OFFSET(_k0addr) \
+ ((__psunsigned_t)(_k0addr) & NODE_ADDRSPACE_MASK)
+
+#define KERN_VARS_ADDR(nasid) KLD_KERN_VARS(nasid)->pointer
+#define KERN_VARS_SIZE(nasid) KLD_KERN_VARS(nasid)->size
+
+#define KERN_XP_ADDR(nasid) KLD_KERN_XP(nasid)->pointer
+#define KERN_XP_SIZE(nasid) KLD_KERN_XP(nasid)->size
+
+#define GPDA_ADDR(nasid) TO_NODE_CAC(nasid, GPDA_OFFSET)
+
+#endif /* !__ASSEMBLY__ */
+
+
+#endif /* _ASM_SN_ADDRS_H */
diff --git a/arch/mips/include/asm/sn/agent.h b/arch/mips/include/asm/sn/agent.h
new file mode 100644
index 00000000000..ac4ea85c3a5
--- /dev/null
+++ b/arch/mips/include/asm/sn/agent.h
@@ -0,0 +1,46 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * This file has definitions for the hub and snac interfaces.
+ *
+ * Copyright (C) 1992 - 1997, 1999, 2000 Silcon Graphics, Inc.
+ * Copyright (C) 1999, 2000 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_SGI_SN_AGENT_H
+#define _ASM_SGI_SN_AGENT_H
+
+#include <linux/topology.h>
+#include <asm/sn/addrs.h>
+#include <asm/sn/arch.h>
+
+#if defined(CONFIG_SGI_IP27)
+#include <asm/sn/sn0/hub.h>
+#elif defined(CONFIG_SGI_IP35)
+#include <asm/sn/sn1/hub.h>
+#endif /* !CONFIG_SGI_IP27 && !CONFIG_SGI_IP35 */
+
+/*
+ * NIC register macros
+ */
+
+#if defined(CONFIG_SGI_IP27)
+#define HUB_NIC_ADDR(_cpuid) \
+ REMOTE_HUB_ADDR(COMPACT_TO_NASID_NODEID(cpu_to_node(_cpuid)), \
+ MD_MLAN_CTL)
+#endif
+
+#define SET_HUB_NIC(_my_cpuid, _val) \
+ (HUB_S(HUB_NIC_ADDR(_my_cpuid), (_val)))
+
+#define SET_MY_HUB_NIC(_v) \
+ SET_HUB_NIC(cpuid(), (_v))
+
+#define GET_HUB_NIC(_my_cpuid) \
+ (HUB_L(HUB_NIC_ADDR(_my_cpuid)))
+
+#define GET_MY_HUB_NIC() \
+ GET_HUB_NIC(cpuid())
+
+#endif /* _ASM_SGI_SN_AGENT_H */
diff --git a/arch/mips/include/asm/sn/arch.h b/arch/mips/include/asm/sn/arch.h
new file mode 100644
index 00000000000..bd75945e10f
--- /dev/null
+++ b/arch/mips/include/asm/sn/arch.h
@@ -0,0 +1,64 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI specific setup.
+ *
+ * Copyright (C) 1995 - 1997, 1999 Silcon Graphics, Inc.
+ * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_SN_ARCH_H
+#define _ASM_SN_ARCH_H
+
+#include <linux/types.h>
+#include <asm/sn/types.h>
+#ifdef CONFIG_SGI_IP27
+#include <asm/sn/sn0/arch.h>
+#endif
+
+typedef u64 hubreg_t;
+
+#define cputonasid(cpu) (sn_cpu_info[(cpu)].p_nasid)
+#define cputoslice(cpu) (sn_cpu_info[(cpu)].p_slice)
+#define makespnum(_nasid, _slice) \
+ (((_nasid) << CPUS_PER_NODE_SHFT) | (_slice))
+
+#define INVALID_NASID (nasid_t)-1
+#define INVALID_CNODEID (cnodeid_t)-1
+#define INVALID_PNODEID (pnodeid_t)-1
+#define INVALID_MODULE (moduleid_t)-1
+#define INVALID_PARTID (partid_t)-1
+
+extern nasid_t get_nasid(void);
+extern cnodeid_t get_cpu_cnode(cpuid_t);
+extern int get_cpu_slice(cpuid_t);
+
+/*
+ * NO ONE should access these arrays directly. The only reason we refer to
+ * them here is to avoid the procedure call that would be required in the
+ * macros below. (Really want private data members here :-)
+ */
+extern cnodeid_t nasid_to_compact_node[MAX_NASIDS];
+extern nasid_t compact_to_nasid_node[MAX_COMPACT_NODES];
+
+/*
+ * These macros are used by various parts of the kernel to convert
+ * between the three different kinds of node numbering. At least some
+ * of them may change to procedure calls in the future, but the macros
+ * will continue to work. Don't use the arrays above directly.
+ */
+
+#define NASID_TO_REGION(nnode) \
+ ((nnode) >> \
+ (is_fine_dirmode() ? NASID_TO_FINEREG_SHFT : NASID_TO_COARSEREG_SHFT))
+
+extern cnodeid_t nasid_to_compact_node[MAX_NASIDS];
+extern nasid_t compact_to_nasid_node[MAX_COMPACT_NODES];
+extern cnodeid_t cpuid_to_compact_node[MAXCPUS];
+
+#define NASID_TO_COMPACT_NODEID(nnode) (nasid_to_compact_node[nnode])
+#define COMPACT_TO_NASID_NODEID(cnode) (compact_to_nasid_node[cnode])
+#define CPUID_TO_COMPACT_NODEID(cpu) (cpuid_to_compact_node[(cpu)])
+
+#endif /* _ASM_SN_ARCH_H */
diff --git a/arch/mips/include/asm/sn/fru.h b/arch/mips/include/asm/sn/fru.h
new file mode 100644
index 00000000000..b3e3606723b
--- /dev/null
+++ b/arch/mips/include/asm/sn/fru.h
@@ -0,0 +1,44 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/sn0_fru.h>
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silcon Graphics, Inc.
+ * Copyright (C) 1999, 2006 Ralf Baechle (ralf@linux-mips)
+ */
+#ifndef __ASM_SN_FRU_H
+#define __ASM_SN_FRU_H
+
+#define MAX_DIMMS 8 /* max # of dimm banks */
+#define MAX_PCIDEV 8 /* max # of pci devices on a pci bus */
+
+typedef unsigned char confidence_t;
+
+typedef struct kf_mem_s {
+ confidence_t km_confidence; /* confidence level that the memory is bad
+ * is this necessary ?
+ */
+ confidence_t km_dimm[MAX_DIMMS];
+ /* confidence level that dimm[i] is bad
+ *I think this is the right number
+ */
+
+} kf_mem_t;
+
+typedef struct kf_cpu_s {
+ confidence_t kc_confidence; /* confidence level that cpu is bad */
+ confidence_t kc_icache; /* confidence level that instr. cache is bad */
+ confidence_t kc_dcache; /* confidence level that data cache is bad */
+ confidence_t kc_scache; /* confidence level that sec. cache is bad */
+ confidence_t kc_sysbus; /* confidence level that sysad/cmd/state bus is bad */
+} kf_cpu_t;
+
+typedef struct kf_pci_bus_s {
+ confidence_t kpb_belief; /* confidence level that the pci bus is bad */
+ confidence_t kpb_pcidev_belief[MAX_PCIDEV];
+ /* confidence level that the pci dev is bad */
+} kf_pci_bus_t;
+
+#endif /* __ASM_SN_FRU_H */
diff --git a/arch/mips/include/asm/sn/gda.h b/arch/mips/include/asm/sn/gda.h
new file mode 100644
index 00000000000..9cb6ff77091
--- /dev/null
+++ b/arch/mips/include/asm/sn/gda.h
@@ -0,0 +1,107 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/gda.h>.
+ *
+ * Copyright (C) 1992 - 1997, 2000 Silicon Graphics, Inc.
+ *
+ * gda.h -- Contains the data structure for the global data area,
+ * The GDA contains information communicated between the
+ * PROM, SYMMON, and the kernel.
+ */
+#ifndef _ASM_SN_GDA_H
+#define _ASM_SN_GDA_H
+
+#include <asm/sn/addrs.h>
+
+#define GDA_MAGIC 0x58464552
+
+/*
+ * GDA Version History
+ *
+ * Version # | Change
+ * -------------+-------------------------------------------------------
+ * 1 | Initial SN0 version
+ * 2 | Prom sets g_partid field to the partition number. 0 IS
+ * | a valid partition #.
+ */
+
+#define GDA_VERSION 2 /* Current GDA version # */
+
+#define G_MAGICOFF 0
+#define G_VERSIONOFF 4
+#define G_PROMOPOFF 6
+#define G_MASTEROFF 8
+#define G_VDSOFF 12
+#define G_HKDNORMOFF 16
+#define G_HKDUTLBOFF 24
+#define G_HKDXUTLBOFF 32
+#define G_PARTIDOFF 40
+#define G_TABLEOFF 128
+
+#ifndef __ASSEMBLY__
+
+typedef struct gda {
+ u32 g_magic; /* GDA magic number */
+ u16 g_version; /* Version of this structure */
+ u16 g_masterid; /* The NASID:CPUNUM of the master cpu */
+ u32 g_promop; /* Passes requests from the kernel to prom */
+ u32 g_vds; /* Store the virtual dipswitches here */
+ void **g_hooked_norm;/* ptr to pda loc for norm hndlr */
+ void **g_hooked_utlb;/* ptr to pda loc for utlb hndlr */
+ void **g_hooked_xtlb;/* ptr to pda loc for xtlb hndlr */
+ int g_partid; /* partition id */
+ int g_symmax; /* Max symbols in name table. */
+ void *g_dbstab; /* Address of idbg symbol table */
+ char *g_nametab; /* Address of idbg name table */
+ void *g_ktext_repmask;
+ /* Pointer to a mask of nodes with copies
+ * of the kernel. */
+ char g_padding[56]; /* pad out to 128 bytes */
+ nasid_t g_nasidtable[MAX_COMPACT_NODES]; /* NASID of each node,
+ * indexed by cnodeid.
+ */
+} gda_t;
+
+#define GDA ((gda_t*) GDA_ADDR(get_nasid()))
+
+#endif /* !__ASSEMBLY__ */
+/*
+ * Define: PART_GDA_VERSION
+ * Purpose: Define the minimum version of the GDA required, lower
+ * revisions assume GDA is NOT set up, and read partition
+ * information from the board info.
+ */
+#define PART_GDA_VERSION 2
+
+/*
+ * The following requests can be sent to the PROM during startup.
+ */
+
+#define PROMOP_MAGIC 0x0ead0000
+#define PROMOP_MAGIC_MASK 0x0fff0000
+
+#define PROMOP_BIST_SHIFT 11
+#define PROMOP_BIST_MASK (0x3 << 11)
+
+#define PROMOP_REG PI_ERR_STACK_ADDR_A
+
+#define PROMOP_INVALID (PROMOP_MAGIC | 0x00)
+#define PROMOP_HALT (PROMOP_MAGIC | 0x10)
+#define PROMOP_POWERDOWN (PROMOP_MAGIC | 0x20)
+#define PROMOP_RESTART (PROMOP_MAGIC | 0x30)
+#define PROMOP_REBOOT (PROMOP_MAGIC | 0x40)
+#define PROMOP_IMODE (PROMOP_MAGIC | 0x50)
+
+#define PROMOP_CMD_MASK 0x00f0
+#define PROMOP_OPTIONS_MASK 0xfff0
+
+#define PROMOP_SKIP_DIAGS 0x0100 /* don't bother running diags */
+#define PROMOP_SKIP_MEMINIT 0x0200 /* don't bother initing memory */
+#define PROMOP_SKIP_DEVINIT 0x0400 /* don't bother initing devices */
+#define PROMOP_BIST1 0x0800 /* keep track of which BIST ran */
+#define PROMOP_BIST2 0x1000 /* keep track of which BIST ran */
+
+#endif /* _ASM_SN_GDA_H */
diff --git a/arch/mips/include/asm/sn/hub.h b/arch/mips/include/asm/sn/hub.h
new file mode 100644
index 00000000000..1992d9254a0
--- /dev/null
+++ b/arch/mips/include/asm/sn/hub.h
@@ -0,0 +1,16 @@
+#ifndef __ASM_SN_HUB_H
+#define __ASM_SN_HUB_H
+
+#include <linux/types.h>
+#include <linux/cpumask.h>
+#include <asm/sn/types.h>
+#include <asm/sn/io.h>
+#include <asm/sn/klkernvars.h>
+#include <asm/xtalk/xtalk.h>
+
+/* ip27-hubio.c */
+extern unsigned long hub_pio_map(cnodeid_t cnode, xwidgetnum_t widget,
+ unsigned long xtalk_addr, size_t size);
+extern void hub_pio_init(cnodeid_t cnode);
+
+#endif /* __ASM_SN_HUB_H */
diff --git a/arch/mips/include/asm/sn/intr.h b/arch/mips/include/asm/sn/intr.h
new file mode 100644
index 00000000000..6718b644b97
--- /dev/null
+++ b/arch/mips/include/asm/sn/intr.h
@@ -0,0 +1,129 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997 Silicon Graphics, Inc.
+ */
+#ifndef __ASM_SN_INTR_H
+#define __ASM_SN_INTR_H
+
+/* Number of interrupt levels associated with each interrupt register. */
+#define N_INTPEND_BITS 64
+
+#define INT_PEND0_BASELVL 0
+#define INT_PEND1_BASELVL 64
+
+#define N_INTPENDJUNK_BITS 8
+#define INTPENDJUNK_CLRBIT 0x80
+
+/*
+ * Macros to manipulate the interrupt register on the calling hub chip.
+ */
+
+#define LOCAL_HUB_SEND_INTR(level) \
+ LOCAL_HUB_S(PI_INT_PEND_MOD, (0x100 | (level)))
+#define REMOTE_HUB_SEND_INTR(hub, level) \
+ REMOTE_HUB_S((hub), PI_INT_PEND_MOD, (0x100 | (level)))
+
+/*
+ * When clearing the interrupt, make sure this clear does make it
+ * to the hub. Otherwise we could end up losing interrupts.
+ * We do an uncached load of the int_pend0 register to ensure this.
+ */
+
+#define LOCAL_HUB_CLR_INTR(level) \
+do { \
+ LOCAL_HUB_S(PI_INT_PEND_MOD, (level)); \
+ LOCAL_HUB_L(PI_INT_PEND0); \
+} while (0);
+
+#define REMOTE_HUB_CLR_INTR(hub, level) \
+do { \
+ nasid_t __hub = (hub); \
+ \
+ REMOTE_HUB_S(__hub, PI_INT_PEND_MOD, (level)); \
+ REMOTE_HUB_L(__hub, PI_INT_PEND0); \
+} while (0);
+
+/*
+ * Hard-coded interrupt levels:
+ */
+
+/*
+ * L0 = SW1
+ * L1 = SW2
+ * L2 = INT_PEND0
+ * L3 = INT_PEND1
+ * L4 = RTC
+ * L5 = Profiling Timer
+ * L6 = Hub Errors
+ * L7 = Count/Compare (T5 counters)
+ */
+
+
+/*
+ * INT_PEND0 hard-coded bits.
+ */
+
+/*
+ * INT_PEND0 bits determined by hardware:
+ */
+#define RESERVED_INTR 0 /* What is this bit? */
+#define GFX_INTR_A 1
+#define GFX_INTR_B 2
+#define PG_MIG_INTR 3
+#define UART_INTR 4
+#define CC_PEND_A 5
+#define CC_PEND_B 6
+
+/*
+ * INT_PEND0 used by the kernel for itself ...
+ */
+#define CPU_RESCHED_A_IRQ 7
+#define CPU_RESCHED_B_IRQ 8
+#define CPU_CALL_A_IRQ 9
+#define CPU_CALL_B_IRQ 10
+#define MSC_MESG_INTR 11
+#define BASE_PCI_IRQ 12
+
+/*
+ * INT_PEND0 again, bits determined by hardware / hardcoded:
+ */
+#define SDISK_INTR 63 /* SABLE name */
+#define IP_PEND0_6_63 63 /* What is this bit? */
+
+/*
+ * INT_PEND1 hard-coded bits:
+ */
+#define NI_BRDCAST_ERR_A 39
+#define NI_BRDCAST_ERR_B 40
+
+#define LLP_PFAIL_INTR_A 41 /* see ml/SN/SN0/sysctlr.c */
+#define LLP_PFAIL_INTR_B 42
+
+#define TLB_INTR_A 43 /* used for tlb flush random */
+#define TLB_INTR_B 44
+
+#define IP27_INTR_0 45 /* Reserved for PROM use */
+#define IP27_INTR_1 46 /* do not use in Kernel */
+#define IP27_INTR_2 47
+#define IP27_INTR_3 48
+#define IP27_INTR_4 49
+#define IP27_INTR_5 50
+#define IP27_INTR_6 51
+#define IP27_INTR_7 52
+
+#define BRIDGE_ERROR_INTR 53 /* Setup by PROM to catch */
+ /* Bridge Errors */
+#define DEBUG_INTR_A 54
+#define DEBUG_INTR_B 55 /* Used by symmon to stop all cpus */
+#define IO_ERROR_INTR 57 /* Setup by PROM */
+#define CLK_ERR_INTR 58
+#define COR_ERR_INTR_A 59
+#define COR_ERR_INTR_B 60
+#define MD_COR_ERR_INTR 61
+#define NI_ERROR_INTR 62
+#define MSC_PANIC_INTR 63
+
+#endif /* __ASM_SN_INTR_H */
diff --git a/arch/mips/include/asm/sn/io.h b/arch/mips/include/asm/sn/io.h
new file mode 100644
index 00000000000..24c6775fbb0
--- /dev/null
+++ b/arch/mips/include/asm/sn/io.h
@@ -0,0 +1,59 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000, 2003 Ralf Baechle
+ * Copyright (C) 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SN_IO_H
+#define _ASM_SN_IO_H
+
+#if defined(CONFIG_SGI_IP27)
+#include <asm/sn/sn0/hubio.h>
+#endif
+
+
+#define IIO_ITTE_BASE 0x400160 /* base of translation table entries */
+#define IIO_ITTE(bigwin) (IIO_ITTE_BASE + 8*(bigwin))
+
+#define IIO_ITTE_OFFSET_BITS 5 /* size of offset field */
+#define IIO_ITTE_OFFSET_MASK ((1<<IIO_ITTE_OFFSET_BITS)-1)
+#define IIO_ITTE_OFFSET_SHIFT 0
+
+#define IIO_ITTE_WIDGET_BITS 4 /* size of widget field */
+#define IIO_ITTE_WIDGET_MASK ((1<<IIO_ITTE_WIDGET_BITS)-1)
+#define IIO_ITTE_WIDGET_SHIFT 8
+
+#define IIO_ITTE_IOSP 1 /* I/O Space bit */
+#define IIO_ITTE_IOSP_MASK 1
+#define IIO_ITTE_IOSP_SHIFT 12
+#define HUB_PIO_MAP_TO_MEM 0
+#define HUB_PIO_MAP_TO_IO 1
+
+#define IIO_ITTE_INVALID_WIDGET 3 /* an invalid widget */
+
+#define IIO_ITTE_PUT(nasid, bigwin, io_or_mem, widget, addr) \
+ REMOTE_HUB_S((nasid), IIO_ITTE(bigwin), \
+ (((((addr) >> BWIN_SIZE_BITS) & \
+ IIO_ITTE_OFFSET_MASK) << IIO_ITTE_OFFSET_SHIFT) | \
+ (io_or_mem << IIO_ITTE_IOSP_SHIFT) | \
+ (((widget) & IIO_ITTE_WIDGET_MASK) << IIO_ITTE_WIDGET_SHIFT)))
+
+#define IIO_ITTE_DISABLE(nasid, bigwin) \
+ IIO_ITTE_PUT((nasid), HUB_PIO_MAP_TO_MEM, \
+ (bigwin), IIO_ITTE_INVALID_WIDGET, 0)
+
+#define IIO_ITTE_GET(nasid, bigwin) REMOTE_HUB_ADDR((nasid), IIO_ITTE(bigwin))
+
+/*
+ * Macro which takes the widget number, and returns the
+ * IO PRB address of that widget.
+ * value _x is expected to be a widget number in the range
+ * 0, 8 - 0xF
+ */
+#define IIO_IOPRB(_x) (IIO_IOPRB_0 + ( ( (_x) < HUB_WIDGET_ID_MIN ? \
+ (_x) : \
+ (_x) - (HUB_WIDGET_ID_MIN-1)) << 3) )
+
+#endif /* _ASM_SN_IO_H */
diff --git a/arch/mips/include/asm/sn/ioc3.h b/arch/mips/include/asm/sn/ioc3.h
new file mode 100644
index 00000000000..099677774d7
--- /dev/null
+++ b/arch/mips/include/asm/sn/ioc3.h
@@ -0,0 +1,663 @@
+/*
+ * Copyright (C) 1999, 2000 Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _IOC3_H
+#define _IOC3_H
+
+#include <linux/types.h>
+
+/* SUPERIO uart register map */
+typedef volatile struct ioc3_uartregs {
+ union {
+ volatile u8 rbr; /* read only, DLAB == 0 */
+ volatile u8 thr; /* write only, DLAB == 0 */
+ volatile u8 dll; /* DLAB == 1 */
+ } u1;
+ union {
+ volatile u8 ier; /* DLAB == 0 */
+ volatile u8 dlm; /* DLAB == 1 */
+ } u2;
+ union {
+ volatile u8 iir; /* read only */
+ volatile u8 fcr; /* write only */
+ } u3;
+ volatile u8 iu_lcr;
+ volatile u8 iu_mcr;
+ volatile u8 iu_lsr;
+ volatile u8 iu_msr;
+ volatile u8 iu_scr;
+} ioc3_uregs_t;
+
+#define iu_rbr u1.rbr
+#define iu_thr u1.thr
+#define iu_dll u1.dll
+#define iu_ier u2.ier
+#define iu_dlm u2.dlm
+#define iu_iir u3.iir
+#define iu_fcr u3.fcr
+
+struct ioc3_sioregs {
+ volatile u8 fill[0x141]; /* starts at 0x141 */
+
+ volatile u8 uartc;
+ volatile u8 kbdcg;
+
+ volatile u8 fill0[0x150 - 0x142 - 1];
+
+ volatile u8 pp_data;
+ volatile u8 pp_dsr;
+ volatile u8 pp_dcr;
+
+ volatile u8 fill1[0x158 - 0x152 - 1];
+
+ volatile u8 pp_fifa;
+ volatile u8 pp_cfgb;
+ volatile u8 pp_ecr;
+
+ volatile u8 fill2[0x168 - 0x15a - 1];
+
+ volatile u8 rtcad;
+ volatile u8 rtcdat;
+
+ volatile u8 fill3[0x170 - 0x169 - 1];
+
+ struct ioc3_uartregs uartb; /* 0x20170 */
+ struct ioc3_uartregs uarta; /* 0x20178 */
+};
+
+/* Register layout of IOC3 in configuration space. */
+struct ioc3 {
+ volatile u32 pad0[7]; /* 0x00000 */
+ volatile u32 sio_ir; /* 0x0001c */
+ volatile u32 sio_ies; /* 0x00020 */
+ volatile u32 sio_iec; /* 0x00024 */
+ volatile u32 sio_cr; /* 0x00028 */
+ volatile u32 int_out; /* 0x0002c */
+ volatile u32 mcr; /* 0x00030 */
+
+ /* General Purpose I/O registers */
+ volatile u32 gpcr_s; /* 0x00034 */
+ volatile u32 gpcr_c; /* 0x00038 */
+ volatile u32 gpdr; /* 0x0003c */
+ volatile u32 gppr_0; /* 0x00040 */
+ volatile u32 gppr_1; /* 0x00044 */
+ volatile u32 gppr_2; /* 0x00048 */
+ volatile u32 gppr_3; /* 0x0004c */
+ volatile u32 gppr_4; /* 0x00050 */
+ volatile u32 gppr_5; /* 0x00054 */
+ volatile u32 gppr_6; /* 0x00058 */
+ volatile u32 gppr_7; /* 0x0005c */
+ volatile u32 gppr_8; /* 0x00060 */
+ volatile u32 gppr_9; /* 0x00064 */
+ volatile u32 gppr_10; /* 0x00068 */
+ volatile u32 gppr_11; /* 0x0006c */
+ volatile u32 gppr_12; /* 0x00070 */
+ volatile u32 gppr_13; /* 0x00074 */
+ volatile u32 gppr_14; /* 0x00078 */
+ volatile u32 gppr_15; /* 0x0007c */
+
+ /* Parallel Port Registers */
+ volatile u32 ppbr_h_a; /* 0x00080 */
+ volatile u32 ppbr_l_a; /* 0x00084 */
+ volatile u32 ppcr_a; /* 0x00088 */
+ volatile u32 ppcr; /* 0x0008c */
+ volatile u32 ppbr_h_b; /* 0x00090 */
+ volatile u32 ppbr_l_b; /* 0x00094 */
+ volatile u32 ppcr_b; /* 0x00098 */
+
+ /* Keyboard and Mouse Registers */
+ volatile u32 km_csr; /* 0x0009c */
+ volatile u32 k_rd; /* 0x000a0 */
+ volatile u32 m_rd; /* 0x000a4 */
+ volatile u32 k_wd; /* 0x000a8 */
+ volatile u32 m_wd; /* 0x000ac */
+
+ /* Serial Port Registers */
+ volatile u32 sbbr_h; /* 0x000b0 */
+ volatile u32 sbbr_l; /* 0x000b4 */
+ volatile u32 sscr_a; /* 0x000b8 */
+ volatile u32 stpir_a; /* 0x000bc */
+ volatile u32 stcir_a; /* 0x000c0 */
+ volatile u32 srpir_a; /* 0x000c4 */
+ volatile u32 srcir_a; /* 0x000c8 */
+ volatile u32 srtr_a; /* 0x000cc */
+ volatile u32 shadow_a; /* 0x000d0 */
+ volatile u32 sscr_b; /* 0x000d4 */
+ volatile u32 stpir_b; /* 0x000d8 */
+ volatile u32 stcir_b; /* 0x000dc */
+ volatile u32 srpir_b; /* 0x000e0 */
+ volatile u32 srcir_b; /* 0x000e4 */
+ volatile u32 srtr_b; /* 0x000e8 */
+ volatile u32 shadow_b; /* 0x000ec */
+
+ /* Ethernet Registers */
+ volatile u32 emcr; /* 0x000f0 */
+ volatile u32 eisr; /* 0x000f4 */
+ volatile u32 eier; /* 0x000f8 */
+ volatile u32 ercsr; /* 0x000fc */
+ volatile u32 erbr_h; /* 0x00100 */
+ volatile u32 erbr_l; /* 0x00104 */
+ volatile u32 erbar; /* 0x00108 */
+ volatile u32 ercir; /* 0x0010c */
+ volatile u32 erpir; /* 0x00110 */
+ volatile u32 ertr; /* 0x00114 */
+ volatile u32 etcsr; /* 0x00118 */
+ volatile u32 ersr; /* 0x0011c */
+ volatile u32 etcdc; /* 0x00120 */
+ volatile u32 ebir; /* 0x00124 */
+ volatile u32 etbr_h; /* 0x00128 */
+ volatile u32 etbr_l; /* 0x0012c */
+ volatile u32 etcir; /* 0x00130 */
+ volatile u32 etpir; /* 0x00134 */
+ volatile u32 emar_h; /* 0x00138 */
+ volatile u32 emar_l; /* 0x0013c */
+ volatile u32 ehar_h; /* 0x00140 */
+ volatile u32 ehar_l; /* 0x00144 */
+ volatile u32 micr; /* 0x00148 */
+ volatile u32 midr_r; /* 0x0014c */
+ volatile u32 midr_w; /* 0x00150 */
+ volatile u32 pad1[(0x20000 - 0x00154) / 4];
+
+ /* SuperIO Registers XXX */
+ struct ioc3_sioregs sregs; /* 0x20000 */
+ volatile u32 pad2[(0x40000 - 0x20180) / 4];
+
+ /* SSRAM Diagnostic Access */
+ volatile u32 ssram[(0x80000 - 0x40000) / 4];
+
+ /* Bytebus device offsets
+ 0x80000 - Access to the generic devices selected with DEV0
+ 0x9FFFF bytebus DEV_SEL_0
+ 0xA0000 - Access to the generic devices selected with DEV1
+ 0xBFFFF bytebus DEV_SEL_1
+ 0xC0000 - Access to the generic devices selected with DEV2
+ 0xDFFFF bytebus DEV_SEL_2
+ 0xE0000 - Access to the generic devices selected with DEV3
+ 0xFFFFF bytebus DEV_SEL_3 */
+};
+
+/*
+ * Ethernet RX Buffer
+ */
+struct ioc3_erxbuf {
+ u32 w0; /* first word (valid,bcnt,cksum) */
+ u32 err; /* second word various errors */
+ /* next comes n bytes of padding */
+ /* then the received ethernet frame itself */
+};
+
+#define ERXBUF_IPCKSUM_MASK 0x0000ffff
+#define ERXBUF_BYTECNT_MASK 0x07ff0000
+#define ERXBUF_BYTECNT_SHIFT 16
+#define ERXBUF_V 0x80000000
+
+#define ERXBUF_CRCERR 0x00000001 /* aka RSV15 */
+#define ERXBUF_FRAMERR 0x00000002 /* aka RSV14 */
+#define ERXBUF_CODERR 0x00000004 /* aka RSV13 */
+#define ERXBUF_INVPREAMB 0x00000008 /* aka RSV18 */
+#define ERXBUF_LOLEN 0x00007000 /* aka RSV2_0 */
+#define ERXBUF_HILEN 0x03ff0000 /* aka RSV12_3 */
+#define ERXBUF_MULTICAST 0x04000000 /* aka RSV16 */
+#define ERXBUF_BROADCAST 0x08000000 /* aka RSV17 */
+#define ERXBUF_LONGEVENT 0x10000000 /* aka RSV19 */
+#define ERXBUF_BADPKT 0x20000000 /* aka RSV20 */
+#define ERXBUF_GOODPKT 0x40000000 /* aka RSV21 */
+#define ERXBUF_CARRIER 0x80000000 /* aka RSV22 */
+
+/*
+ * Ethernet TX Descriptor
+ */
+#define ETXD_DATALEN 104
+struct ioc3_etxd {
+ u32 cmd; /* command field */
+ u32 bufcnt; /* buffer counts field */
+ u64 p1; /* buffer pointer 1 */
+ u64 p2; /* buffer pointer 2 */
+ u8 data[ETXD_DATALEN]; /* opt. tx data */
+};
+
+#define ETXD_BYTECNT_MASK 0x000007ff /* total byte count */
+#define ETXD_INTWHENDONE 0x00001000 /* intr when done */
+#define ETXD_D0V 0x00010000 /* data 0 valid */
+#define ETXD_B1V 0x00020000 /* buf 1 valid */
+#define ETXD_B2V 0x00040000 /* buf 2 valid */
+#define ETXD_DOCHECKSUM 0x00080000 /* insert ip cksum */
+#define ETXD_CHKOFF_MASK 0x07f00000 /* cksum byte offset */
+#define ETXD_CHKOFF_SHIFT 20
+
+#define ETXD_D0CNT_MASK 0x0000007f
+#define ETXD_B1CNT_MASK 0x0007ff00
+#define ETXD_B1CNT_SHIFT 8
+#define ETXD_B2CNT_MASK 0x7ff00000
+#define ETXD_B2CNT_SHIFT 20
+
+/*
+ * Bytebus device space
+ */
+#define IOC3_BYTEBUS_DEV0 0x80000L
+#define IOC3_BYTEBUS_DEV1 0xa0000L
+#define IOC3_BYTEBUS_DEV2 0xc0000L
+#define IOC3_BYTEBUS_DEV3 0xe0000L
+
+/* ------------------------------------------------------------------------- */
+
+/* Superio Registers (PIO Access) */
+#define IOC3_SIO_BASE 0x20000
+#define IOC3_SIO_UARTC (IOC3_SIO_BASE+0x141) /* UART Config */
+#define IOC3_SIO_KBDCG (IOC3_SIO_BASE+0x142) /* KBD Config */
+#define IOC3_SIO_PP_BASE (IOC3_SIO_BASE+PP_BASE) /* Parallel Port */
+#define IOC3_SIO_RTC_BASE (IOC3_SIO_BASE+0x168) /* Real Time Clock */
+#define IOC3_SIO_UB_BASE (IOC3_SIO_BASE+UARTB_BASE) /* UART B */
+#define IOC3_SIO_UA_BASE (IOC3_SIO_BASE+UARTA_BASE) /* UART A */
+
+/* SSRAM Diagnostic Access */
+#define IOC3_SSRAM IOC3_RAM_OFF /* base of SSRAM diagnostic access */
+#define IOC3_SSRAM_LEN 0x40000 /* 256kb (address space size, may not be fully populated) */
+#define IOC3_SSRAM_DM 0x0000ffff /* data mask */
+#define IOC3_SSRAM_PM 0x00010000 /* parity mask */
+
+/* bitmasks for PCI_SCR */
+#define PCI_SCR_PAR_RESP_EN 0x00000040 /* enb PCI parity checking */
+#define PCI_SCR_SERR_EN 0x00000100 /* enable the SERR# driver */
+#define PCI_SCR_DROP_MODE_EN 0x00008000 /* drop pios on parity err */
+#define PCI_SCR_RX_SERR (0x1 << 16)
+#define PCI_SCR_DROP_MODE (0x1 << 17)
+#define PCI_SCR_SIG_PAR_ERR (0x1 << 24)
+#define PCI_SCR_SIG_TAR_ABRT (0x1 << 27)
+#define PCI_SCR_RX_TAR_ABRT (0x1 << 28)
+#define PCI_SCR_SIG_MST_ABRT (0x1 << 29)
+#define PCI_SCR_SIG_SERR (0x1 << 30)
+#define PCI_SCR_PAR_ERR (0x1 << 31)
+
+/* bitmasks for IOC3_KM_CSR */
+#define KM_CSR_K_WRT_PEND 0x00000001 /* kbd port xmitting or resetting */
+#define KM_CSR_M_WRT_PEND 0x00000002 /* mouse port xmitting or resetting */
+#define KM_CSR_K_LCB 0x00000004 /* Line Cntrl Bit for last KBD write */
+#define KM_CSR_M_LCB 0x00000008 /* same for mouse */
+#define KM_CSR_K_DATA 0x00000010 /* state of kbd data line */
+#define KM_CSR_K_CLK 0x00000020 /* state of kbd clock line */
+#define KM_CSR_K_PULL_DATA 0x00000040 /* pull kbd data line low */
+#define KM_CSR_K_PULL_CLK 0x00000080 /* pull kbd clock line low */
+#define KM_CSR_M_DATA 0x00000100 /* state of ms data line */
+#define KM_CSR_M_CLK 0x00000200 /* state of ms clock line */
+#define KM_CSR_M_PULL_DATA 0x00000400 /* pull ms data line low */
+#define KM_CSR_M_PULL_CLK 0x00000800 /* pull ms clock line low */
+#define KM_CSR_EMM_MODE 0x00001000 /* emulation mode */
+#define KM_CSR_SIM_MODE 0x00002000 /* clock X8 */
+#define KM_CSR_K_SM_IDLE 0x00004000 /* Keyboard is idle */
+#define KM_CSR_M_SM_IDLE 0x00008000 /* Mouse is idle */
+#define KM_CSR_K_TO 0x00010000 /* Keyboard trying to send/receive */
+#define KM_CSR_M_TO 0x00020000 /* Mouse trying to send/receive */
+#define KM_CSR_K_TO_EN 0x00040000 /* KM_CSR_K_TO + KM_CSR_K_TO_EN = cause
+ SIO_IR to assert */
+#define KM_CSR_M_TO_EN 0x00080000 /* KM_CSR_M_TO + KM_CSR_M_TO_EN = cause
+ SIO_IR to assert */
+#define KM_CSR_K_CLAMP_ONE 0x00100000 /* Pull K_CLK low after rec. one char */
+#define KM_CSR_M_CLAMP_ONE 0x00200000 /* Pull M_CLK low after rec. one char */
+#define KM_CSR_K_CLAMP_THREE 0x00400000 /* Pull K_CLK low after rec. three chars */
+#define KM_CSR_M_CLAMP_THREE 0x00800000 /* Pull M_CLK low after rec. three char */
+
+/* bitmasks for IOC3_K_RD and IOC3_M_RD */
+#define KM_RD_DATA_2 0x000000ff /* 3rd char recvd since last read */
+#define KM_RD_DATA_2_SHIFT 0
+#define KM_RD_DATA_1 0x0000ff00 /* 2nd char recvd since last read */
+#define KM_RD_DATA_1_SHIFT 8
+#define KM_RD_DATA_0 0x00ff0000 /* 1st char recvd since last read */
+#define KM_RD_DATA_0_SHIFT 16
+#define KM_RD_FRAME_ERR_2 0x01000000 /* framing or parity error in byte 2 */
+#define KM_RD_FRAME_ERR_1 0x02000000 /* same for byte 1 */
+#define KM_RD_FRAME_ERR_0 0x04000000 /* same for byte 0 */
+
+#define KM_RD_KBD_MSE 0x08000000 /* 0 if from kbd, 1 if from mouse */
+#define KM_RD_OFLO 0x10000000 /* 4th char recvd before this read */
+#define KM_RD_VALID_2 0x20000000 /* DATA_2 valid */
+#define KM_RD_VALID_1 0x40000000 /* DATA_1 valid */
+#define KM_RD_VALID_0 0x80000000 /* DATA_0 valid */
+#define KM_RD_VALID_ALL (KM_RD_VALID_0|KM_RD_VALID_1|KM_RD_VALID_2)
+
+/* bitmasks for IOC3_K_WD & IOC3_M_WD */
+#define KM_WD_WRT_DATA 0x000000ff /* write to keyboard/mouse port */
+#define KM_WD_WRT_DATA_SHIFT 0
+
+/* bitmasks for serial RX status byte */
+#define RXSB_OVERRUN 0x01 /* char(s) lost */
+#define RXSB_PAR_ERR 0x02 /* parity error */
+#define RXSB_FRAME_ERR 0x04 /* framing error */
+#define RXSB_BREAK 0x08 /* break character */
+#define RXSB_CTS 0x10 /* state of CTS */
+#define RXSB_DCD 0x20 /* state of DCD */
+#define RXSB_MODEM_VALID 0x40 /* DCD, CTS and OVERRUN are valid */
+#define RXSB_DATA_VALID 0x80 /* data byte, FRAME_ERR PAR_ERR & BREAK valid */
+
+/* bitmasks for serial TX control byte */
+#define TXCB_INT_WHEN_DONE 0x20 /* interrupt after this byte is sent */
+#define TXCB_INVALID 0x00 /* byte is invalid */
+#define TXCB_VALID 0x40 /* byte is valid */
+#define TXCB_MCR 0x80 /* data<7:0> to modem control register */
+#define TXCB_DELAY 0xc0 /* delay data<7:0> mSec */
+
+/* bitmasks for IOC3_SBBR_L */
+#define SBBR_L_SIZE 0x00000001 /* 0 == 1KB rings, 1 == 4KB rings */
+#define SBBR_L_BASE 0xfffff000 /* lower serial ring base addr */
+
+/* bitmasks for IOC3_SSCR_<A:B> */
+#define SSCR_RX_THRESHOLD 0x000001ff /* hiwater mark */
+#define SSCR_TX_TIMER_BUSY 0x00010000 /* TX timer in progress */
+#define SSCR_HFC_EN 0x00020000 /* hardware flow control enabled */
+#define SSCR_RX_RING_DCD 0x00040000 /* post RX record on delta-DCD */
+#define SSCR_RX_RING_CTS 0x00080000 /* post RX record on delta-CTS */
+#define SSCR_HIGH_SPD 0x00100000 /* 4X speed */
+#define SSCR_DIAG 0x00200000 /* bypass clock divider for sim */
+#define SSCR_RX_DRAIN 0x08000000 /* drain RX buffer to memory */
+#define SSCR_DMA_EN 0x10000000 /* enable ring buffer DMA */
+#define SSCR_DMA_PAUSE 0x20000000 /* pause DMA */
+#define SSCR_PAUSE_STATE 0x40000000 /* sets when PAUSE takes effect */
+#define SSCR_RESET 0x80000000 /* reset DMA channels */
+
+/* all producer/comsumer pointers are the same bitfield */
+#define PROD_CONS_PTR_4K 0x00000ff8 /* for 4K buffers */
+#define PROD_CONS_PTR_1K 0x000003f8 /* for 1K buffers */
+#define PROD_CONS_PTR_OFF 3
+
+/* bitmasks for IOC3_SRCIR_<A:B> */
+#define SRCIR_ARM 0x80000000 /* arm RX timer */
+
+/* bitmasks for IOC3_SRPIR_<A:B> */
+#define SRPIR_BYTE_CNT 0x07000000 /* bytes in packer */
+#define SRPIR_BYTE_CNT_SHIFT 24
+
+/* bitmasks for IOC3_STCIR_<A:B> */
+#define STCIR_BYTE_CNT 0x0f000000 /* bytes in unpacker */
+#define STCIR_BYTE_CNT_SHIFT 24
+
+/* bitmasks for IOC3_SHADOW_<A:B> */
+#define SHADOW_DR 0x00000001 /* data ready */
+#define SHADOW_OE 0x00000002 /* overrun error */
+#define SHADOW_PE 0x00000004 /* parity error */
+#define SHADOW_FE 0x00000008 /* framing error */
+#define SHADOW_BI 0x00000010 /* break interrupt */
+#define SHADOW_THRE 0x00000020 /* transmit holding register empty */
+#define SHADOW_TEMT 0x00000040 /* transmit shift register empty */
+#define SHADOW_RFCE 0x00000080 /* char in RX fifo has an error */
+#define SHADOW_DCTS 0x00010000 /* delta clear to send */
+#define SHADOW_DDCD 0x00080000 /* delta data carrier detect */
+#define SHADOW_CTS 0x00100000 /* clear to send */
+#define SHADOW_DCD 0x00800000 /* data carrier detect */
+#define SHADOW_DTR 0x01000000 /* data terminal ready */
+#define SHADOW_RTS 0x02000000 /* request to send */
+#define SHADOW_OUT1 0x04000000 /* 16550 OUT1 bit */
+#define SHADOW_OUT2 0x08000000 /* 16550 OUT2 bit */
+#define SHADOW_LOOP 0x10000000 /* loopback enabled */
+
+/* bitmasks for IOC3_SRTR_<A:B> */
+#define SRTR_CNT 0x00000fff /* reload value for RX timer */
+#define SRTR_CNT_VAL 0x0fff0000 /* current value of RX timer */
+#define SRTR_CNT_VAL_SHIFT 16
+#define SRTR_HZ 16000 /* SRTR clock frequency */
+
+/* bitmasks for IOC3_SIO_IR, IOC3_SIO_IEC and IOC3_SIO_IES */
+#define SIO_IR_SA_TX_MT 0x00000001 /* Serial port A TX empty */
+#define SIO_IR_SA_RX_FULL 0x00000002 /* port A RX buf full */
+#define SIO_IR_SA_RX_HIGH 0x00000004 /* port A RX hiwat */
+#define SIO_IR_SA_RX_TIMER 0x00000008 /* port A RX timeout */
+#define SIO_IR_SA_DELTA_DCD 0x00000010 /* port A delta DCD */
+#define SIO_IR_SA_DELTA_CTS 0x00000020 /* port A delta CTS */
+#define SIO_IR_SA_INT 0x00000040 /* port A pass-thru intr */
+#define SIO_IR_SA_TX_EXPLICIT 0x00000080 /* port A explicit TX thru */
+#define SIO_IR_SA_MEMERR 0x00000100 /* port A PCI error */
+#define SIO_IR_SB_TX_MT 0x00000200 /* */
+#define SIO_IR_SB_RX_FULL 0x00000400 /* */
+#define SIO_IR_SB_RX_HIGH 0x00000800 /* */
+#define SIO_IR_SB_RX_TIMER 0x00001000 /* */
+#define SIO_IR_SB_DELTA_DCD 0x00002000 /* */
+#define SIO_IR_SB_DELTA_CTS 0x00004000 /* */
+#define SIO_IR_SB_INT 0x00008000 /* */
+#define SIO_IR_SB_TX_EXPLICIT 0x00010000 /* */
+#define SIO_IR_SB_MEMERR 0x00020000 /* */
+#define SIO_IR_PP_INT 0x00040000 /* P port pass-thru intr */
+#define SIO_IR_PP_INTA 0x00080000 /* PP context A thru */
+#define SIO_IR_PP_INTB 0x00100000 /* PP context B thru */
+#define SIO_IR_PP_MEMERR 0x00200000 /* PP PCI error */
+#define SIO_IR_KBD_INT 0x00400000 /* kbd/mouse intr */
+#define SIO_IR_RT_INT 0x08000000 /* RT output pulse */
+#define SIO_IR_GEN_INT1 0x10000000 /* RT input pulse */
+#define SIO_IR_GEN_INT_SHIFT 28
+
+/* per device interrupt masks */
+#define SIO_IR_SA (SIO_IR_SA_TX_MT | SIO_IR_SA_RX_FULL | \
+ SIO_IR_SA_RX_HIGH | SIO_IR_SA_RX_TIMER | \
+ SIO_IR_SA_DELTA_DCD | SIO_IR_SA_DELTA_CTS | \
+ SIO_IR_SA_INT | SIO_IR_SA_TX_EXPLICIT | \
+ SIO_IR_SA_MEMERR)
+#define SIO_IR_SB (SIO_IR_SB_TX_MT | SIO_IR_SB_RX_FULL | \
+ SIO_IR_SB_RX_HIGH | SIO_IR_SB_RX_TIMER | \
+ SIO_IR_SB_DELTA_DCD | SIO_IR_SB_DELTA_CTS | \
+ SIO_IR_SB_INT | SIO_IR_SB_TX_EXPLICIT | \
+ SIO_IR_SB_MEMERR)
+#define SIO_IR_PP (SIO_IR_PP_INT | SIO_IR_PP_INTA | \
+ SIO_IR_PP_INTB | SIO_IR_PP_MEMERR)
+#define SIO_IR_RT (SIO_IR_RT_INT | SIO_IR_GEN_INT1)
+
+/* macro to load pending interrupts */
+#define IOC3_PENDING_INTRS(mem) (PCI_INW(&((mem)->sio_ir)) & \
+ PCI_INW(&((mem)->sio_ies_ro)))
+
+/* bitmasks for SIO_CR */
+#define SIO_CR_SIO_RESET 0x00000001 /* reset the SIO */
+#define SIO_CR_SER_A_BASE 0x000000fe /* DMA poll addr port A */
+#define SIO_CR_SER_A_BASE_SHIFT 1
+#define SIO_CR_SER_B_BASE 0x00007f00 /* DMA poll addr port B */
+#define SIO_CR_SER_B_BASE_SHIFT 8
+#define SIO_SR_CMD_PULSE 0x00078000 /* byte bus strobe length */
+#define SIO_CR_CMD_PULSE_SHIFT 15
+#define SIO_CR_ARB_DIAG 0x00380000 /* cur !enet PCI requet (ro) */
+#define SIO_CR_ARB_DIAG_TXA 0x00000000
+#define SIO_CR_ARB_DIAG_RXA 0x00080000
+#define SIO_CR_ARB_DIAG_TXB 0x00100000
+#define SIO_CR_ARB_DIAG_RXB 0x00180000
+#define SIO_CR_ARB_DIAG_PP 0x00200000
+#define SIO_CR_ARB_DIAG_IDLE 0x00400000 /* 0 -> active request (ro) */
+
+/* bitmasks for INT_OUT */
+#define INT_OUT_COUNT 0x0000ffff /* pulse interval timer */
+#define INT_OUT_MODE 0x00070000 /* mode mask */
+#define INT_OUT_MODE_0 0x00000000 /* set output to 0 */
+#define INT_OUT_MODE_1 0x00040000 /* set output to 1 */
+#define INT_OUT_MODE_1PULSE 0x00050000 /* send 1 pulse */
+#define INT_OUT_MODE_PULSES 0x00060000 /* send 1 pulse every interval */
+#define INT_OUT_MODE_SQW 0x00070000 /* toggle output every interval */
+#define INT_OUT_DIAG 0x40000000 /* diag mode */
+#define INT_OUT_INT_OUT 0x80000000 /* current state of INT_OUT */
+
+/* time constants for INT_OUT */
+#define INT_OUT_NS_PER_TICK (30 * 260) /* 30 ns PCI clock, divisor=260 */
+#define INT_OUT_TICKS_PER_PULSE 3 /* outgoing pulse lasts 3 ticks */
+#define INT_OUT_US_TO_COUNT(x) /* convert uS to a count value */ \
+ (((x) * 10 + INT_OUT_NS_PER_TICK / 200) * \
+ 100 / INT_OUT_NS_PER_TICK - 1)
+#define INT_OUT_COUNT_TO_US(x) /* convert count value to uS */ \
+ (((x) + 1) * INT_OUT_NS_PER_TICK / 1000)
+#define INT_OUT_MIN_TICKS 3 /* min period is width of pulse in "ticks" */
+#define INT_OUT_MAX_TICKS INT_OUT_COUNT /* largest possible count */
+
+/* bitmasks for GPCR */
+#define GPCR_DIR 0x000000ff /* tristate pin input or output */
+#define GPCR_DIR_PIN(x) (1<<(x)) /* access one of the DIR bits */
+#define GPCR_EDGE 0x000f0000 /* extint edge or level sensitive */
+#define GPCR_EDGE_PIN(x) (1<<((x)+15)) /* access one of the EDGE bits */
+
+/* values for GPCR */
+#define GPCR_INT_OUT_EN 0x00100000 /* enable INT_OUT to pin 0 */
+#define GPCR_MLAN_EN 0x00200000 /* enable MCR to pin 8 */
+#define GPCR_DIR_SERA_XCVR 0x00000080 /* Port A Transceiver select enable */
+#define GPCR_DIR_SERB_XCVR 0x00000040 /* Port B Transceiver select enable */
+#define GPCR_DIR_PHY_RST 0x00000020 /* ethernet PHY reset enable */
+
+/* defs for some of the generic I/O pins */
+#define GPCR_PHY_RESET 0x20 /* pin is output to PHY reset */
+#define GPCR_UARTB_MODESEL 0x40 /* pin is output to port B mode sel */
+#define GPCR_UARTA_MODESEL 0x80 /* pin is output to port A mode sel */
+
+#define GPPR_PHY_RESET_PIN 5 /* GIO pin controlling phy reset */
+#define GPPR_UARTB_MODESEL_PIN 6 /* GIO pin controlling uart b mode select */
+#define GPPR_UARTA_MODESEL_PIN 7 /* GIO pin controlling uart a mode select */
+
+#define EMCR_DUPLEX 0x00000001
+#define EMCR_PROMISC 0x00000002
+#define EMCR_PADEN 0x00000004
+#define EMCR_RXOFF_MASK 0x000001f8
+#define EMCR_RXOFF_SHIFT 3
+#define EMCR_RAMPAR 0x00000200
+#define EMCR_BADPAR 0x00000800
+#define EMCR_BUFSIZ 0x00001000
+#define EMCR_TXDMAEN 0x00002000
+#define EMCR_TXEN 0x00004000
+#define EMCR_RXDMAEN 0x00008000
+#define EMCR_RXEN 0x00010000
+#define EMCR_LOOPBACK 0x00020000
+#define EMCR_ARB_DIAG 0x001c0000
+#define EMCR_ARB_DIAG_IDLE 0x00200000
+#define EMCR_RST 0x80000000
+
+#define EISR_RXTIMERINT 0x00000001
+#define EISR_RXTHRESHINT 0x00000002
+#define EISR_RXOFLO 0x00000004
+#define EISR_RXBUFOFLO 0x00000008
+#define EISR_RXMEMERR 0x00000010
+#define EISR_RXPARERR 0x00000020
+#define EISR_TXEMPTY 0x00010000
+#define EISR_TXRTRY 0x00020000
+#define EISR_TXEXDEF 0x00040000
+#define EISR_TXLCOL 0x00080000
+#define EISR_TXGIANT 0x00100000
+#define EISR_TXBUFUFLO 0x00200000
+#define EISR_TXEXPLICIT 0x00400000
+#define EISR_TXCOLLWRAP 0x00800000
+#define EISR_TXDEFERWRAP 0x01000000
+#define EISR_TXMEMERR 0x02000000
+#define EISR_TXPARERR 0x04000000
+
+#define ERCSR_THRESH_MASK 0x000001ff /* enet RX threshold */
+#define ERCSR_RX_TMR 0x40000000 /* simulation only */
+#define ERCSR_DIAG_OFLO 0x80000000 /* simulation only */
+
+#define ERBR_ALIGNMENT 4096
+#define ERBR_L_RXRINGBASE_MASK 0xfffff000
+
+#define ERBAR_BARRIER_BIT 0x0100
+#define ERBAR_RXBARR_MASK 0xffff0000
+#define ERBAR_RXBARR_SHIFT 16
+
+#define ERCIR_RXCONSUME_MASK 0x00000fff
+
+#define ERPIR_RXPRODUCE_MASK 0x00000fff
+#define ERPIR_ARM 0x80000000
+
+#define ERTR_CNT_MASK 0x000007ff
+
+#define ETCSR_IPGT_MASK 0x0000007f
+#define ETCSR_IPGR1_MASK 0x00007f00
+#define ETCSR_IPGR1_SHIFT 8
+#define ETCSR_IPGR2_MASK 0x007f0000
+#define ETCSR_IPGR2_SHIFT 16
+#define ETCSR_NOTXCLK 0x80000000
+
+#define ETCDC_COLLCNT_MASK 0x0000ffff
+#define ETCDC_DEFERCNT_MASK 0xffff0000
+#define ETCDC_DEFERCNT_SHIFT 16
+
+#define ETBR_ALIGNMENT (64*1024)
+#define ETBR_L_RINGSZ_MASK 0x00000001
+#define ETBR_L_RINGSZ128 0
+#define ETBR_L_RINGSZ512 1
+#define ETBR_L_TXRINGBASE_MASK 0xffffc000
+
+#define ETCIR_TXCONSUME_MASK 0x0000ffff
+#define ETCIR_IDLE 0x80000000
+
+#define ETPIR_TXPRODUCE_MASK 0x0000ffff
+
+#define EBIR_TXBUFPROD_MASK 0x0000001f
+#define EBIR_TXBUFCONS_MASK 0x00001f00
+#define EBIR_TXBUFCONS_SHIFT 8
+#define EBIR_RXBUFPROD_MASK 0x007fc000
+#define EBIR_RXBUFPROD_SHIFT 14
+#define EBIR_RXBUFCONS_MASK 0xff800000
+#define EBIR_RXBUFCONS_SHIFT 23
+
+#define MICR_REGADDR_MASK 0x0000001f
+#define MICR_PHYADDR_MASK 0x000003e0
+#define MICR_PHYADDR_SHIFT 5
+#define MICR_READTRIG 0x00000400
+#define MICR_BUSY 0x00000800
+
+#define MIDR_DATA_MASK 0x0000ffff
+
+#define ERXBUF_IPCKSUM_MASK 0x0000ffff
+#define ERXBUF_BYTECNT_MASK 0x07ff0000
+#define ERXBUF_BYTECNT_SHIFT 16
+#define ERXBUF_V 0x80000000
+
+#define ERXBUF_CRCERR 0x00000001 /* aka RSV15 */
+#define ERXBUF_FRAMERR 0x00000002 /* aka RSV14 */
+#define ERXBUF_CODERR 0x00000004 /* aka RSV13 */
+#define ERXBUF_INVPREAMB 0x00000008 /* aka RSV18 */
+#define ERXBUF_LOLEN 0x00007000 /* aka RSV2_0 */
+#define ERXBUF_HILEN 0x03ff0000 /* aka RSV12_3 */
+#define ERXBUF_MULTICAST 0x04000000 /* aka RSV16 */
+#define ERXBUF_BROADCAST 0x08000000 /* aka RSV17 */
+#define ERXBUF_LONGEVENT 0x10000000 /* aka RSV19 */
+#define ERXBUF_BADPKT 0x20000000 /* aka RSV20 */
+#define ERXBUF_GOODPKT 0x40000000 /* aka RSV21 */
+#define ERXBUF_CARRIER 0x80000000 /* aka RSV22 */
+
+#define ETXD_BYTECNT_MASK 0x000007ff /* total byte count */
+#define ETXD_INTWHENDONE 0x00001000 /* intr when done */
+#define ETXD_D0V 0x00010000 /* data 0 valid */
+#define ETXD_B1V 0x00020000 /* buf 1 valid */
+#define ETXD_B2V 0x00040000 /* buf 2 valid */
+#define ETXD_DOCHECKSUM 0x00080000 /* insert ip cksum */
+#define ETXD_CHKOFF_MASK 0x07f00000 /* cksum byte offset */
+#define ETXD_CHKOFF_SHIFT 20
+
+#define ETXD_D0CNT_MASK 0x0000007f
+#define ETXD_B1CNT_MASK 0x0007ff00
+#define ETXD_B1CNT_SHIFT 8
+#define ETXD_B2CNT_MASK 0x7ff00000
+#define ETXD_B2CNT_SHIFT 20
+
+typedef enum ioc3_subdevs_e {
+ ioc3_subdev_ether,
+ ioc3_subdev_generic,
+ ioc3_subdev_nic,
+ ioc3_subdev_kbms,
+ ioc3_subdev_ttya,
+ ioc3_subdev_ttyb,
+ ioc3_subdev_ecpp,
+ ioc3_subdev_rt,
+ ioc3_nsubdevs
+} ioc3_subdev_t;
+
+/* subdevice disable bits,
+ * from the standard INFO_LBL_SUBDEVS
+ */
+#define IOC3_SDB_ETHER (1<<ioc3_subdev_ether)
+#define IOC3_SDB_GENERIC (1<<ioc3_subdev_generic)
+#define IOC3_SDB_NIC (1<<ioc3_subdev_nic)
+#define IOC3_SDB_KBMS (1<<ioc3_subdev_kbms)
+#define IOC3_SDB_TTYA (1<<ioc3_subdev_ttya)
+#define IOC3_SDB_TTYB (1<<ioc3_subdev_ttyb)
+#define IOC3_SDB_ECPP (1<<ioc3_subdev_ecpp)
+#define IOC3_SDB_RT (1<<ioc3_subdev_rt)
+
+#define IOC3_ALL_SUBDEVS ((1<<ioc3_nsubdevs)-1)
+
+#define IOC3_SDB_SERIAL (IOC3_SDB_TTYA|IOC3_SDB_TTYB)
+
+#define IOC3_STD_SUBDEVS IOC3_ALL_SUBDEVS
+
+#define IOC3_INTA_SUBDEVS IOC3_SDB_ETHER
+#define IOC3_INTB_SUBDEVS (IOC3_SDB_GENERIC|IOC3_SDB_KBMS|IOC3_SDB_SERIAL|IOC3_SDB_ECPP|IOC3_SDB_RT)
+
+#endif /* _IOC3_H */
diff --git a/arch/mips/include/asm/sn/klconfig.h b/arch/mips/include/asm/sn/klconfig.h
new file mode 100644
index 00000000000..09e590daca1
--- /dev/null
+++ b/arch/mips/include/asm/sn/klconfig.h
@@ -0,0 +1,898 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/klconfig.h>.
+ *
+ * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 1999, 2000 by Ralf Baechle
+ */
+#ifndef _ASM_SN_KLCONFIG_H
+#define _ASM_SN_KLCONFIG_H
+
+/*
+ * The KLCONFIG structures store info about the various BOARDs found
+ * during Hardware Discovery. In addition, it stores info about the
+ * components found on the BOARDs.
+ */
+
+/*
+ * WARNING:
+ * Certain assembly language routines (notably xxxxx.s) in the IP27PROM
+ * will depend on the format of the data structures in this file. In
+ * most cases, rearranging the fields can seriously break things.
+ * Adding fields in the beginning or middle can also break things.
+ * Add fields if necessary, to the end of a struct in such a way
+ * that offsets of existing fields do not change.
+ */
+
+#include <linux/types.h>
+#include <asm/sn/types.h>
+
+#if defined(CONFIG_SGI_IP27)
+
+#include <asm/sn/sn0/addrs.h>
+//#include <sys/SN/router.h>
+// XXX Stolen from <sys/SN/router.h>:
+#define MAX_ROUTER_PORTS (6) /* Max. number of ports on a router */
+#include <asm/sn/fru.h>
+//#include <sys/graph.h>
+//#include <sys/xtalk/xbow.h>
+
+#elif defined(CONFIG_SGI_IP35)
+
+#include <asm/sn/sn1/addrs.h>
+#include <sys/sn/router.h>
+#include <sys/graph.h>
+#include <asm/xtalk/xbow.h>
+
+#endif /* !CONFIG_SGI_IP27 && !CONFIG_SGI_IP35 */
+
+#if defined(CONFIG_SGI_IP27) || defined(CONFIG_SGI_IP35)
+#include <asm/sn/agent.h>
+#include <asm/fw/arc/types.h>
+#include <asm/fw/arc/hinv.h>
+#if defined(CONFIG_SGI_IP35)
+// The hack file has to be before vector and after sn0_fru....
+#include <asm/hack.h>
+#include <asm/sn/vector.h>
+#include <asm/xtalk/xtalk.h>
+#endif /* CONFIG_SGI_IP35 */
+#endif /* CONFIG_SGI_IP27 || CONFIG_SGI_IP35 */
+
+typedef u64 nic_t;
+
+#define KLCFGINFO_MAGIC 0xbeedbabe
+
+typedef s32 klconf_off_t;
+
+/*
+ * Some IMPORTANT OFFSETS. These are the offsets on all NODES.
+ */
+#define MAX_MODULE_ID 255
+#define SIZE_PAD 4096 /* 4k padding for structures */
+/*
+ * 1 NODE brd, 2 Router brd (1 8p, 1 meta), 6 Widgets,
+ * 2 Midplanes assuming no pci card cages
+ */
+#define MAX_SLOTS_PER_NODE (1 + 2 + 6 + 2)
+
+/* XXX if each node is guranteed to have some memory */
+
+#define MAX_PCI_DEVS 8
+
+/* lboard_t->brd_flags fields */
+/* All bits in this field are currently used. Try the pad fields if
+ you need more flag bits */
+
+#define ENABLE_BOARD 0x01
+#define FAILED_BOARD 0x02
+#define DUPLICATE_BOARD 0x04 /* Boards like midplanes/routers which
+ are discovered twice. Use one of them */
+#define VISITED_BOARD 0x08 /* Used for compact hub numbering. */
+#define LOCAL_MASTER_IO6 0x10 /* master io6 for that node */
+#define GLOBAL_MASTER_IO6 0x20
+#define THIRD_NIC_PRESENT 0x40 /* for future use */
+#define SECOND_NIC_PRESENT 0x80 /* addons like MIO are present */
+
+/* klinfo->flags fields */
+
+#define KLINFO_ENABLE 0x01 /* This component is enabled */
+#define KLINFO_FAILED 0x02 /* This component failed */
+#define KLINFO_DEVICE 0x04 /* This component is a device */
+#define KLINFO_VISITED 0x08 /* This component has been visited */
+#define KLINFO_CONTROLLER 0x10 /* This component is a device controller */
+#define KLINFO_INSTALL 0x20 /* Install a driver */
+#define KLINFO_HEADLESS 0x40 /* Headless (or hubless) component */
+#define IS_CONSOLE_IOC3(i) ((((klinfo_t *)i)->flags) & KLINFO_INSTALL)
+
+#define GB2 0x80000000
+
+#define MAX_RSV_PTRS 32
+
+/* Structures to manage various data storage areas */
+/* The numbers must be contiguous since the array index i
+ is used in the code to allocate various areas.
+*/
+
+#define BOARD_STRUCT 0
+#define COMPONENT_STRUCT 1
+#define ERRINFO_STRUCT 2
+#define KLMALLOC_TYPE_MAX (ERRINFO_STRUCT + 1)
+#define DEVICE_STRUCT 3
+
+
+typedef struct console_s {
+ unsigned long uart_base;
+ unsigned long config_base;
+ unsigned long memory_base;
+ short baud;
+ short flag;
+ int type;
+ nasid_t nasid;
+ char wid;
+ char npci;
+ nic_t baseio_nic;
+} console_t;
+
+typedef struct klc_malloc_hdr {
+ klconf_off_t km_base;
+ klconf_off_t km_limit;
+ klconf_off_t km_current;
+} klc_malloc_hdr_t;
+
+/* Functions/macros needed to use this structure */
+
+typedef struct kl_config_hdr {
+ u64 ch_magic; /* set this to KLCFGINFO_MAGIC */
+ u32 ch_version; /* structure version number */
+ klconf_off_t ch_malloc_hdr_off; /* offset of ch_malloc_hdr */
+ klconf_off_t ch_cons_off; /* offset of ch_cons */
+ klconf_off_t ch_board_info; /* the link list of boards */
+ console_t ch_cons_info; /* address info of the console */
+ klc_malloc_hdr_t ch_malloc_hdr[KLMALLOC_TYPE_MAX];
+ confidence_t ch_sw_belief; /* confidence that software is bad*/
+ confidence_t ch_sn0net_belief; /* confidence that sn0net is bad */
+} kl_config_hdr_t;
+
+
+#define KL_CONFIG_HDR(_nasid) ((kl_config_hdr_t *)(KLCONFIG_ADDR(_nasid)))
+#define KL_CONFIG_INFO_OFFSET(_nasid) \
+ (KL_CONFIG_HDR(_nasid)->ch_board_info)
+#define KL_CONFIG_INFO_SET_OFFSET(_nasid, _off) \
+ (KL_CONFIG_HDR(_nasid)->ch_board_info = (_off))
+
+#define KL_CONFIG_INFO(_nasid) \
+ (lboard_t *)((KL_CONFIG_HDR(_nasid)->ch_board_info) ? \
+ NODE_OFFSET_TO_K1((_nasid), KL_CONFIG_HDR(_nasid)->ch_board_info) : \
+ 0)
+#define KL_CONFIG_MAGIC(_nasid) (KL_CONFIG_HDR(_nasid)->ch_magic)
+
+#define KL_CONFIG_CHECK_MAGIC(_nasid) \
+ (KL_CONFIG_HDR(_nasid)->ch_magic == KLCFGINFO_MAGIC)
+
+#define KL_CONFIG_HDR_INIT_MAGIC(_nasid) \
+ (KL_CONFIG_HDR(_nasid)->ch_magic = KLCFGINFO_MAGIC)
+
+/* --- New Macros for the changed kl_config_hdr_t structure --- */
+
+#define PTR_CH_MALLOC_HDR(_k) ((klc_malloc_hdr_t *)\
+ ((unsigned long)_k + (_k->ch_malloc_hdr_off)))
+
+#define KL_CONFIG_CH_MALLOC_HDR(_n) PTR_CH_MALLOC_HDR(KL_CONFIG_HDR(_n))
+
+#define PTR_CH_CONS_INFO(_k) ((console_t *)\
+ ((unsigned long)_k + (_k->ch_cons_off)))
+
+#define KL_CONFIG_CH_CONS_INFO(_n) PTR_CH_CONS_INFO(KL_CONFIG_HDR(_n))
+
+/* ------------------------------------------------------------- */
+
+#define KL_CONFIG_INFO_START(_nasid) \
+ (klconf_off_t)(KLCONFIG_OFFSET(_nasid) + sizeof(kl_config_hdr_t))
+
+#define KL_CONFIG_BOARD_NASID(_brd) ((_brd)->brd_nasid)
+#define KL_CONFIG_BOARD_SET_NEXT(_brd, _off) ((_brd)->brd_next = (_off))
+
+#define KL_CONFIG_DUPLICATE_BOARD(_brd) ((_brd)->brd_flags & DUPLICATE_BOARD)
+
+#define XBOW_PORT_TYPE_HUB(_xbowp, _link) \
+ ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_HUB)
+#define XBOW_PORT_TYPE_IO(_xbowp, _link) \
+ ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_IO)
+
+#define XBOW_PORT_IS_ENABLED(_xbowp, _link) \
+ ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_ENABLE)
+#define XBOW_PORT_NASID(_xbowp, _link) \
+ ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_nasid)
+
+#define XBOW_PORT_IO 0x1
+#define XBOW_PORT_HUB 0x2
+#define XBOW_PORT_ENABLE 0x4
+
+#define SN0_PORT_FENCE_SHFT 0
+#define SN0_PORT_FENCE_MASK (1 << SN0_PORT_FENCE_SHFT)
+
+/*
+ * The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD
+ * can be either 'LOCAL' or 'REMOTE'. LOCAL means it is attached to
+ * the LOCAL/current NODE. REMOTE means it is attached to a different
+ * node.(TBD - Need a way to treat ROUTER boards.)
+ *
+ * There are 2 different structures to represent these boards -
+ * lboard - Local board, rboard - remote board. These 2 structures
+ * can be arbitrarily mixed in the LINKED LIST of BOARDs. (Refer
+ * Figure below). The first byte of the rboard or lboard structure
+ * is used to find out its type - no unions are used.
+ * If it is a lboard, then the config info of this board will be found
+ * on the local node. (LOCAL NODE BASE + offset value gives pointer to
+ * the structure.
+ * If it is a rboard, the local structure contains the node number
+ * and the offset of the beginning of the LINKED LIST on the remote node.
+ * The details of the hardware on a remote node can be built locally,
+ * if required, by reading the LINKED LIST on the remote node and
+ * ignoring all the rboards on that node.
+ *
+ * The local node uses the REMOTE NODE NUMBER + OFFSET to point to the
+ * First board info on the remote node. The remote node list is
+ * traversed as the local list, using the REMOTE BASE ADDRESS and not
+ * the local base address and ignoring all rboard values.
+ *
+ *
+ KLCONFIG
+
+ +------------+ +------------+ +------------+ +------------+
+ | lboard | +-->| lboard | +-->| rboard | +-->| lboard |
+ +------------+ | +------------+ | +------------+ | +------------+
+ | board info | | | board info | | |errinfo,bptr| | | board info |
+ +------------+ | +------------+ | +------------+ | +------------+
+ | offset |--+ | offset |--+ | offset |--+ |offset=NULL |
+ +------------+ +------------+ +------------+ +------------+
+
+
+ +------------+
+ | board info |
+ +------------+ +--------------------------------+
+ | compt 1 |------>| type, rev, diaginfo, size ... | (CPU)
+ +------------+ +--------------------------------+
+ | compt 2 |--+
+ +------------+ | +--------------------------------+
+ | ... | +--->| type, rev, diaginfo, size ... | (MEM_BANK)
+ +------------+ +--------------------------------+
+ | errinfo |--+
+ +------------+ | +--------------------------------+
+ +--->|r/l brd errinfo,compt err flags |
+ +--------------------------------+
+
+ *
+ * Each BOARD consists of COMPONENTs and the BOARD structure has
+ * pointers (offsets) to its COMPONENT structure.
+ * The COMPONENT structure has version info, size and speed info, revision,
+ * error info and the NIC info. This structure can accommodate any
+ * BOARD with arbitrary COMPONENT composition.
+ *
+ * The ERRORINFO part of each BOARD has error information
+ * that describes errors about the BOARD itself. It also has flags to
+ * indicate the COMPONENT(s) on the board that have errors. The error
+ * information specific to the COMPONENT is present in the respective
+ * COMPONENT structure.
+ *
+ * The ERRORINFO structure is also treated like a COMPONENT, ie. the
+ * BOARD has pointers(offset) to the ERRORINFO structure. The rboard
+ * structure also has a pointer to the ERRORINFO structure. This is
+ * the place to store ERRORINFO about a REMOTE NODE, if the HUB on
+ * that NODE is not working or if the REMOTE MEMORY is BAD. In cases where
+ * only the CPU of the REMOTE NODE is disabled, the ERRORINFO pointer can
+ * be a NODE NUMBER, REMOTE OFFSET combination, pointing to error info
+ * which is present on the REMOTE NODE.(TBD)
+ * REMOTE ERRINFO can be stored on any of the nearest nodes
+ * or on all the nearest nodes.(TBD)
+ * Like BOARD structures, REMOTE ERRINFO structures can be built locally
+ * using the rboard errinfo pointer.
+ *
+ * In order to get useful information from this Data organization, a set of
+ * interface routines are provided (TBD). The important thing to remember while
+ * manipulating the structures, is that, the NODE number information should
+ * be used. If the NODE is non-zero (remote) then each offset should
+ * be added to the REMOTE BASE ADDR else it should be added to the LOCAL BASE ADDR.
+ * This includes offsets for BOARDS, COMPONENTS and ERRORINFO.
+ *
+ * Note that these structures do not provide much info about connectivity.
+ * That info will be part of HWGRAPH, which is an extension of the cfg_t
+ * data structure. (ref IP27prom/cfg.h) It has to be extended to include
+ * the IO part of the Network(TBD).
+ *
+ * The data structures below define the above concepts.
+ */
+
+/*
+ * Values for CPU types
+ */
+#define KL_CPU_R4000 0x1 /* Standard R4000 */
+#define KL_CPU_TFP 0x2 /* TFP processor */
+#define KL_CPU_R10000 0x3 /* R10000 (T5) */
+#define KL_CPU_NONE (-1) /* no cpu present in slot */
+
+/*
+ * IP27 BOARD classes
+ */
+
+#define KLCLASS_MASK 0xf0
+#define KLCLASS_NONE 0x00
+#define KLCLASS_NODE 0x10 /* CPU, Memory and HUB board */
+#define KLCLASS_CPU KLCLASS_NODE
+#define KLCLASS_IO 0x20 /* BaseIO, 4 ch SCSI, ethernet, FDDI
+ and the non-graphics widget boards */
+#define KLCLASS_ROUTER 0x30 /* Router board */
+#define KLCLASS_MIDPLANE 0x40 /* We need to treat this as a board
+ so that we can record error info */
+#define KLCLASS_GFX 0x50 /* graphics boards */
+
+#define KLCLASS_PSEUDO_GFX 0x60 /* HDTV type cards that use a gfx
+ * hw ifc to xtalk and are not gfx
+ * class for sw purposes */
+
+#define KLCLASS_MAX 7 /* Bump this if a new CLASS is added */
+#define KLTYPE_MAX 10 /* Bump this if a new CLASS is added */
+
+#define KLCLASS_UNKNOWN 0xf0
+
+#define KLCLASS(_x) ((_x) & KLCLASS_MASK)
+
+/*
+ * IP27 board types
+ */
+
+#define KLTYPE_MASK 0x0f
+#define KLTYPE_NONE 0x00
+#define KLTYPE_EMPTY 0x00
+
+#define KLTYPE_WEIRDCPU (KLCLASS_CPU | 0x0)
+#define KLTYPE_IP27 (KLCLASS_CPU | 0x1) /* 2 CPUs(R10K) per board */
+
+#define KLTYPE_WEIRDIO (KLCLASS_IO | 0x0)
+#define KLTYPE_BASEIO (KLCLASS_IO | 0x1) /* IOC3, SuperIO, Bridge, SCSI */
+#define KLTYPE_IO6 KLTYPE_BASEIO /* Additional name */
+#define KLTYPE_4CHSCSI (KLCLASS_IO | 0x2)
+#define KLTYPE_MSCSI KLTYPE_4CHSCSI /* Additional name */
+#define KLTYPE_ETHERNET (KLCLASS_IO | 0x3)
+#define KLTYPE_MENET KLTYPE_ETHERNET /* Additional name */
+#define KLTYPE_FDDI (KLCLASS_IO | 0x4)
+#define KLTYPE_UNUSED (KLCLASS_IO | 0x5) /* XXX UNUSED */
+#define KLTYPE_HAROLD (KLCLASS_IO | 0x6) /* PCI SHOE BOX */
+#define KLTYPE_PCI KLTYPE_HAROLD
+#define KLTYPE_VME (KLCLASS_IO | 0x7) /* Any 3rd party VME card */
+#define KLTYPE_MIO (KLCLASS_IO | 0x8)
+#define KLTYPE_FC (KLCLASS_IO | 0x9)
+#define KLTYPE_LINC (KLCLASS_IO | 0xA)
+#define KLTYPE_TPU (KLCLASS_IO | 0xB) /* Tensor Processing Unit */
+#define KLTYPE_GSN_A (KLCLASS_IO | 0xC) /* Main GSN board */
+#define KLTYPE_GSN_B (KLCLASS_IO | 0xD) /* Auxiliary GSN board */
+
+#define KLTYPE_GFX (KLCLASS_GFX | 0x0) /* unknown graphics type */
+#define KLTYPE_GFX_KONA (KLCLASS_GFX | 0x1) /* KONA graphics on IP27 */
+#define KLTYPE_GFX_MGRA (KLCLASS_GFX | 0x3) /* MGRAS graphics on IP27 */
+
+#define KLTYPE_WEIRDROUTER (KLCLASS_ROUTER | 0x0)
+#define KLTYPE_ROUTER (KLCLASS_ROUTER | 0x1)
+#define KLTYPE_ROUTER2 KLTYPE_ROUTER /* Obsolete! */
+#define KLTYPE_NULL_ROUTER (KLCLASS_ROUTER | 0x2)
+#define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3)
+
+#define KLTYPE_WEIRDMIDPLANE (KLCLASS_MIDPLANE | 0x0)
+#define KLTYPE_MIDPLANE8 (KLCLASS_MIDPLANE | 0x1) /* 8 slot backplane */
+#define KLTYPE_MIDPLANE KLTYPE_MIDPLANE8
+#define KLTYPE_PBRICK_XBOW (KLCLASS_MIDPLANE | 0x2)
+
+#define KLTYPE_IOBRICK (KLCLASS_IOBRICK | 0x0)
+#define KLTYPE_IBRICK (KLCLASS_IOBRICK | 0x1)
+#define KLTYPE_PBRICK (KLCLASS_IOBRICK | 0x2)
+#define KLTYPE_XBRICK (KLCLASS_IOBRICK | 0x3)
+
+#define KLTYPE_PBRICK_BRIDGE KLTYPE_PBRICK
+
+/* The value of type should be more than 8 so that hinv prints
+ * out the board name from the NIC string. For values less than
+ * 8 the name of the board needs to be hard coded in a few places.
+ * When bringup started nic names had not standardized and so we
+ * had to hard code. (For people interested in history.)
+ */
+#define KLTYPE_XTHD (KLCLASS_PSEUDO_GFX | 0x9)
+
+#define KLTYPE_UNKNOWN (KLCLASS_UNKNOWN | 0xf)
+
+#define KLTYPE(_x) ((_x) & KLTYPE_MASK)
+#define IS_MIO_PRESENT(l) ((l->brd_type == KLTYPE_BASEIO) && \
+ (l->brd_flags & SECOND_NIC_PRESENT))
+#define IS_MIO_IOC3(l, n) (IS_MIO_PRESENT(l) && (n > 2))
+
+/*
+ * board structures
+ */
+
+#define MAX_COMPTS_PER_BRD 24
+
+#define LOCAL_BOARD 1
+#define REMOTE_BOARD 2
+
+#define LBOARD_STRUCT_VERSION 2
+
+typedef struct lboard_s {
+ klconf_off_t brd_next; /* Next BOARD */
+ unsigned char struct_type; /* type of structure, local or remote */
+ unsigned char brd_type; /* type+class */
+ unsigned char brd_sversion; /* version of this structure */
+ unsigned char brd_brevision; /* board revision */
+ unsigned char brd_promver; /* board prom version, if any */
+ unsigned char brd_flags; /* Enabled, Disabled etc */
+ unsigned char brd_slot; /* slot number */
+ unsigned short brd_debugsw; /* Debug switches */
+ moduleid_t brd_module; /* module to which it belongs */
+ partid_t brd_partition; /* Partition number */
+ unsigned short brd_diagval; /* diagnostic value */
+ unsigned short brd_diagparm; /* diagnostic parameter */
+ unsigned char brd_inventory; /* inventory history */
+ unsigned char brd_numcompts; /* Number of components */
+ nic_t brd_nic; /* Number in CAN */
+ nasid_t brd_nasid; /* passed parameter */
+ klconf_off_t brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */
+ klconf_off_t brd_errinfo; /* Board's error information */
+ struct lboard_s *brd_parent; /* Logical parent for this brd */
+ vertex_hdl_t brd_graph_link; /* vertex hdl to connect extern compts */
+ confidence_t brd_confidence; /* confidence that the board is bad */
+ nasid_t brd_owner; /* who owns this board */
+ unsigned char brd_nic_flags; /* To handle 8 more NICs */
+ char brd_name[32];
+} lboard_t;
+
+
+/*
+ * Make sure we pass back the calias space address for local boards.
+ * klconfig board traversal and error structure extraction defines.
+ */
+
+#define BOARD_SLOT(_brd) ((_brd)->brd_slot)
+
+#define KLCF_CLASS(_brd) KLCLASS((_brd)->brd_type)
+#define KLCF_TYPE(_brd) KLTYPE((_brd)->brd_type)
+#define KLCF_REMOTE(_brd) (((_brd)->struct_type & LOCAL_BOARD) ? 0 : 1)
+#define KLCF_NUM_COMPS(_brd) ((_brd)->brd_numcompts)
+#define KLCF_MODULE_ID(_brd) ((_brd)->brd_module)
+
+#define KLCF_NEXT(_brd) \
+ ((_brd)->brd_next ? \
+ (lboard_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), (_brd)->brd_next)):\
+ NULL)
+#define KLCF_COMP(_brd, _ndx) \
+ (klinfo_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), \
+ (_brd)->brd_compts[(_ndx)]))
+
+#define KLCF_COMP_ERROR(_brd, _comp) \
+ (NODE_OFFSET_TO_K1(NASID_GET(_brd), (_comp)->errinfo))
+
+#define KLCF_COMP_TYPE(_comp) ((_comp)->struct_type)
+#define KLCF_BRIDGE_W_ID(_comp) ((_comp)->physid) /* Widget ID */
+
+
+
+/*
+ * Generic info structure. This stores common info about a
+ * component.
+ */
+
+typedef struct klinfo_s { /* Generic info */
+ unsigned char struct_type; /* type of this structure */
+ unsigned char struct_version; /* version of this structure */
+ unsigned char flags; /* Enabled, disabled etc */
+ unsigned char revision; /* component revision */
+ unsigned short diagval; /* result of diagnostics */
+ unsigned short diagparm; /* diagnostic parameter */
+ unsigned char inventory; /* previous inventory status */
+ nic_t nic; /* MUst be aligned properly */
+ unsigned char physid; /* physical id of component */
+ unsigned int virtid; /* virtual id as seen by system */
+ unsigned char widid; /* Widget id - if applicable */
+ nasid_t nasid; /* node number - from parent */
+ char pad1; /* pad out structure. */
+ char pad2; /* pad out structure. */
+ COMPONENT *arcs_compt; /* ptr to the arcs struct for ease*/
+ klconf_off_t errinfo; /* component specific errors */
+ unsigned short pad3; /* pci fields have moved over to */
+ unsigned short pad4; /* klbri_t */
+} klinfo_t ;
+
+#define KLCONFIG_INFO_ENABLED(_i) ((_i)->flags & KLINFO_ENABLE)
+/*
+ * Component structures.
+ * Following are the currently identified components:
+ * CPU, HUB, MEM_BANK,
+ * XBOW(consists of 16 WIDGETs, each of which can be HUB or GRAPHICS or BRIDGE)
+ * BRIDGE, IOC3, SuperIO, SCSI, FDDI
+ * ROUTER
+ * GRAPHICS
+ */
+#define KLSTRUCT_UNKNOWN 0
+#define KLSTRUCT_CPU 1
+#define KLSTRUCT_HUB 2
+#define KLSTRUCT_MEMBNK 3
+#define KLSTRUCT_XBOW 4
+#define KLSTRUCT_BRI 5
+#define KLSTRUCT_IOC3 6
+#define KLSTRUCT_PCI 7
+#define KLSTRUCT_VME 8
+#define KLSTRUCT_ROU 9
+#define KLSTRUCT_GFX 10
+#define KLSTRUCT_SCSI 11
+#define KLSTRUCT_FDDI 12
+#define KLSTRUCT_MIO 13
+#define KLSTRUCT_DISK 14
+#define KLSTRUCT_TAPE 15
+#define KLSTRUCT_CDROM 16
+#define KLSTRUCT_HUB_UART 17
+#define KLSTRUCT_IOC3ENET 18
+#define KLSTRUCT_IOC3UART 19
+#define KLSTRUCT_UNUSED 20 /* XXX UNUSED */
+#define KLSTRUCT_IOC3PCKM 21
+#define KLSTRUCT_RAD 22
+#define KLSTRUCT_HUB_TTY 23
+#define KLSTRUCT_IOC3_TTY 24
+
+/* Early Access IO proms are compatible
+ only with KLSTRUCT values upto 24. */
+
+#define KLSTRUCT_FIBERCHANNEL 25
+#define KLSTRUCT_MOD_SERIAL_NUM 26
+#define KLSTRUCT_IOC3MS 27
+#define KLSTRUCT_TPU 28
+#define KLSTRUCT_GSN_A 29
+#define KLSTRUCT_GSN_B 30
+#define KLSTRUCT_XTHD 31
+
+/*
+ * These are the indices of various components within a lboard structure.
+ */
+
+#define IP27_CPU0_INDEX 0
+#define IP27_CPU1_INDEX 1
+#define IP27_HUB_INDEX 2
+#define IP27_MEM_INDEX 3
+
+#define BASEIO_BRIDGE_INDEX 0
+#define BASEIO_IOC3_INDEX 1
+#define BASEIO_SCSI1_INDEX 2
+#define BASEIO_SCSI2_INDEX 3
+
+#define MIDPLANE_XBOW_INDEX 0
+#define ROUTER_COMPONENT_INDEX 0
+
+#define CH4SCSI_BRIDGE_INDEX 0
+
+/* Info holders for various hardware components */
+
+typedef u64 *pci_t;
+typedef u64 *vmeb_t;
+typedef u64 *vmed_t;
+typedef u64 *fddi_t;
+typedef u64 *scsi_t;
+typedef u64 *mio_t;
+typedef u64 *graphics_t;
+typedef u64 *router_t;
+
+/*
+ * The port info in ip27_cfg area translates to a lboart_t in the
+ * KLCONFIG area. But since KLCONFIG does not use pointers, lboart_t
+ * is stored in terms of a nasid and a offset from start of KLCONFIG
+ * area on that nasid.
+ */
+typedef struct klport_s {
+ nasid_t port_nasid;
+ unsigned char port_flag;
+ klconf_off_t port_offset;
+} klport_t;
+
+typedef struct klcpu_s { /* CPU */
+ klinfo_t cpu_info;
+ unsigned short cpu_prid; /* Processor PRID value */
+ unsigned short cpu_fpirr; /* FPU IRR value */
+ unsigned short cpu_speed; /* Speed in MHZ */
+ unsigned short cpu_scachesz; /* secondary cache size in MB */
+ unsigned short cpu_scachespeed;/* secondary cache speed in MHz */
+} klcpu_t ;
+
+#define CPU_STRUCT_VERSION 2
+
+typedef struct klhub_s { /* HUB */
+ klinfo_t hub_info;
+ unsigned int hub_flags; /* PCFG_HUB_xxx flags */
+ klport_t hub_port; /* hub is connected to this */
+ nic_t hub_box_nic; /* nic of containing box */
+ klconf_off_t hub_mfg_nic; /* MFG NIC string */
+ u64 hub_speed; /* Speed of hub in HZ */
+} klhub_t ;
+
+typedef struct klhub_uart_s { /* HUB */
+ klinfo_t hubuart_info;
+ unsigned int hubuart_flags; /* PCFG_HUB_xxx flags */
+ nic_t hubuart_box_nic; /* nic of containing box */
+} klhub_uart_t ;
+
+#define MEMORY_STRUCT_VERSION 2
+
+typedef struct klmembnk_s { /* MEMORY BANK */
+ klinfo_t membnk_info;
+ short membnk_memsz; /* Total memory in megabytes */
+ short membnk_dimm_select; /* bank to physical addr mapping*/
+ short membnk_bnksz[MD_MEM_BANKS]; /* Memory bank sizes */
+ short membnk_attr;
+} klmembnk_t ;
+
+#define KLCONFIG_MEMBNK_SIZE(_info, _bank) \
+ ((_info)->membnk_bnksz[(_bank)])
+
+
+#define MEMBNK_PREMIUM 1
+#define KLCONFIG_MEMBNK_PREMIUM(_info, _bank) \
+ ((_info)->membnk_attr & (MEMBNK_PREMIUM << (_bank)))
+
+#define MAX_SERIAL_NUM_SIZE 10
+
+typedef struct klmod_serial_num_s {
+ klinfo_t snum_info;
+ union {
+ char snum_str[MAX_SERIAL_NUM_SIZE];
+ unsigned long long snum_int;
+ } snum;
+} klmod_serial_num_t;
+
+/* Macros needed to access serial number structure in lboard_t.
+ Hard coded values are necessary since we cannot treat
+ serial number struct as a component without losing compatibility
+ between prom versions. */
+
+#define GET_SNUM_COMP(_l) ((klmod_serial_num_t *)\
+ KLCF_COMP(_l, _l->brd_numcompts))
+
+#define MAX_XBOW_LINKS 16
+
+typedef struct klxbow_s { /* XBOW */
+ klinfo_t xbow_info ;
+ klport_t xbow_port_info[MAX_XBOW_LINKS] ; /* Module number */
+ int xbow_master_hub_link;
+ /* type of brd connected+component struct ptr+flags */
+} klxbow_t ;
+
+#define MAX_PCI_SLOTS 8
+
+typedef struct klpci_device_s {
+ s32 pci_device_id; /* 32 bits of vendor/device ID. */
+ s32 pci_device_pad; /* 32 bits of padding. */
+} klpci_device_t;
+
+#define BRIDGE_STRUCT_VERSION 2
+
+typedef struct klbri_s { /* BRIDGE */
+ klinfo_t bri_info ;
+ unsigned char bri_eprominfo ; /* IO6prom connected to bridge */
+ unsigned char bri_bustype ; /* PCI/VME BUS bridge/GIO */
+ pci_t pci_specific ; /* PCI Board config info */
+ klpci_device_t bri_devices[MAX_PCI_DEVS] ; /* PCI IDs */
+ klconf_off_t bri_mfg_nic ;
+} klbri_t ;
+
+#define MAX_IOC3_TTY 2
+
+typedef struct klioc3_s { /* IOC3 */
+ klinfo_t ioc3_info ;
+ unsigned char ioc3_ssram ; /* Info about ssram */
+ unsigned char ioc3_nvram ; /* Info about nvram */
+ klinfo_t ioc3_superio ; /* Info about superio */
+ klconf_off_t ioc3_tty_off ;
+ klinfo_t ioc3_enet ;
+ klconf_off_t ioc3_enet_off ;
+ klconf_off_t ioc3_kbd_off ;
+} klioc3_t ;
+
+#define MAX_VME_SLOTS 8
+
+typedef struct klvmeb_s { /* VME BRIDGE - PCI CTLR */
+ klinfo_t vmeb_info ;
+ vmeb_t vmeb_specific ;
+ klconf_off_t vmeb_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */
+} klvmeb_t ;
+
+typedef struct klvmed_s { /* VME DEVICE - VME BOARD */
+ klinfo_t vmed_info ;
+ vmed_t vmed_specific ;
+ klconf_off_t vmed_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */
+} klvmed_t ;
+
+#define ROUTER_VECTOR_VERS 2
+
+/* XXX - Don't we need the number of ports here?!? */
+typedef struct klrou_s { /* ROUTER */
+ klinfo_t rou_info ;
+ unsigned int rou_flags ; /* PCFG_ROUTER_xxx flags */
+ nic_t rou_box_nic ; /* nic of the containing module */
+ klport_t rou_port[MAX_ROUTER_PORTS + 1] ; /* array index 1 to 6 */
+ klconf_off_t rou_mfg_nic ; /* MFG NIC string */
+ u64 rou_vector; /* vector from master node */
+} klrou_t ;
+
+/*
+ * Graphics Controller/Device
+ *
+ * (IP27/IO6) Prom versions 6.13 (and 6.5.1 kernels) and earlier
+ * used a couple different structures to store graphics information.
+ * For compatibility reasons, the newer data structure preserves some
+ * of the layout so that fields that are used in the old versions remain
+ * in the same place (with the same info). Determination of what version
+ * of this structure we have is done by checking the cookie field.
+ */
+#define KLGFX_COOKIE 0x0c0de000
+
+typedef struct klgfx_s { /* GRAPHICS Device */
+ klinfo_t gfx_info;
+ klconf_off_t old_gndevs; /* for compatibility with older proms */
+ klconf_off_t old_gdoff0; /* for compatibility with older proms */
+ unsigned int cookie; /* for compatibility with older proms */
+ unsigned int moduleslot;
+ struct klgfx_s *gfx_next_pipe;
+ graphics_t gfx_specific;
+ klconf_off_t pad0; /* for compatibility with older proms */
+ klconf_off_t gfx_mfg_nic;
+} klgfx_t;
+
+typedef struct klxthd_s {
+ klinfo_t xthd_info ;
+ klconf_off_t xthd_mfg_nic ; /* MFG NIC string */
+} klxthd_t ;
+
+typedef struct kltpu_s { /* TPU board */
+ klinfo_t tpu_info ;
+ klconf_off_t tpu_mfg_nic ; /* MFG NIC string */
+} kltpu_t ;
+
+typedef struct klgsn_s { /* GSN board */
+ klinfo_t gsn_info ;
+ klconf_off_t gsn_mfg_nic ; /* MFG NIC string */
+} klgsn_t ;
+
+#define MAX_SCSI_DEVS 16
+
+/*
+ * NOTE: THis is the max sized kl* structure and is used in klmalloc.c
+ * to allocate space of type COMPONENT. Make sure that if the size of
+ * any other component struct becomes more than this, then redefine
+ * that as the size to be klmalloced.
+ */
+
+typedef struct klscsi_s { /* SCSI Controller */
+ klinfo_t scsi_info ;
+ scsi_t scsi_specific ;
+ unsigned char scsi_numdevs ;
+ klconf_off_t scsi_devinfo[MAX_SCSI_DEVS] ;
+} klscsi_t ;
+
+typedef struct klscdev_s { /* SCSI device */
+ klinfo_t scdev_info ;
+ struct scsidisk_data *scdev_cfg ; /* driver fills up this */
+} klscdev_t ;
+
+typedef struct klttydev_s { /* TTY device */
+ klinfo_t ttydev_info ;
+ struct terminal_data *ttydev_cfg ; /* driver fills up this */
+} klttydev_t ;
+
+typedef struct klenetdev_s { /* ENET device */
+ klinfo_t enetdev_info ;
+ struct net_data *enetdev_cfg ; /* driver fills up this */
+} klenetdev_t ;
+
+typedef struct klkbddev_s { /* KBD device */
+ klinfo_t kbddev_info ;
+ struct keyboard_data *kbddev_cfg ; /* driver fills up this */
+} klkbddev_t ;
+
+typedef struct klmsdev_s { /* mouse device */
+ klinfo_t msdev_info ;
+ void *msdev_cfg ;
+} klmsdev_t ;
+
+#define MAX_FDDI_DEVS 10 /* XXX Is this true */
+
+typedef struct klfddi_s { /* FDDI */
+ klinfo_t fddi_info ;
+ fddi_t fddi_specific ;
+ klconf_off_t fddi_devinfo[MAX_FDDI_DEVS] ;
+} klfddi_t ;
+
+typedef struct klmio_s { /* MIO */
+ klinfo_t mio_info ;
+ mio_t mio_specific ;
+} klmio_t ;
+
+
+typedef union klcomp_s {
+ klcpu_t kc_cpu;
+ klhub_t kc_hub;
+ klmembnk_t kc_mem;
+ klxbow_t kc_xbow;
+ klbri_t kc_bri;
+ klioc3_t kc_ioc3;
+ klvmeb_t kc_vmeb;
+ klvmed_t kc_vmed;
+ klrou_t kc_rou;
+ klgfx_t kc_gfx;
+ klscsi_t kc_scsi;
+ klscdev_t kc_scsi_dev;
+ klfddi_t kc_fddi;
+ klmio_t kc_mio;
+ klmod_serial_num_t kc_snum ;
+} klcomp_t;
+
+typedef union kldev_s { /* for device structure allocation */
+ klscdev_t kc_scsi_dev ;
+ klttydev_t kc_tty_dev ;
+ klenetdev_t kc_enet_dev ;
+ klkbddev_t kc_kbd_dev ;
+} kldev_t ;
+
+/* Data structure interface routines. TBD */
+
+/* Include launch info in this file itself? TBD */
+
+/*
+ * TBD - Can the ARCS and device driver related info also be included in the
+ * KLCONFIG area. On the IO4PROM, prom device driver info is part of cfgnode_t
+ * structure, viz private to the IO4prom.
+ */
+
+/*
+ * TBD - Allocation issues.
+ *
+ * Do we need to Mark off sepatate heaps for lboard_t, rboard_t, component,
+ * errinfo and allocate from them, or have a single heap and allocate all
+ * structures from it. Debug is easier in the former method since we can
+ * dump all similar structs in one command, but there will be lots of holes,
+ * in memory and max limits are needed for number of structures.
+ * Another way to make it organized, is to have a union of all components
+ * and allocate a aligned chunk of memory greater than the biggest
+ * component.
+ */
+
+typedef union {
+ lboard_t *lbinfo ;
+} biptr_t ;
+
+
+#define BRI_PER_XBOW 6
+#define PCI_PER_BRI 8
+#define DEV_PER_PCI 16
+
+
+/* Virtual dipswitch values (starting from switch "7"): */
+
+#define VDS_NOGFX 0x8000 /* Don't enable gfx and autoboot */
+#define VDS_NOMP 0x100 /* Don't start slave processors */
+#define VDS_MANUMODE 0x80 /* Manufacturing mode */
+#define VDS_NOARB 0x40 /* No bootmaster arbitration */
+#define VDS_PODMODE 0x20 /* Go straight to POD mode */
+#define VDS_NO_DIAGS 0x10 /* Don't run any diags after BM arb */
+#define VDS_DEFAULTS 0x08 /* Use default environment values */
+#define VDS_NOMEMCLEAR 0x04 /* Don't run mem cfg code */
+#define VDS_2ND_IO4 0x02 /* Boot from the second IO4 */
+#define VDS_DEBUG_PROM 0x01 /* Print PROM debugging messages */
+
+/* external declarations of Linux kernel functions. */
+
+extern lboard_t *find_lboard(lboard_t *start, unsigned char type);
+extern klinfo_t *find_component(lboard_t *brd, klinfo_t *kli, unsigned char type);
+extern klinfo_t *find_first_component(lboard_t *brd, unsigned char type);
+extern klcpu_t *nasid_slice_to_cpuinfo(nasid_t, int);
+extern lboard_t *find_lboard_class(lboard_t *start, unsigned char brd_class);
+
+
+extern klcpu_t *sn_get_cpuinfo(cpuid_t cpu);
+
+#endif /* _ASM_SN_KLCONFIG_H */
diff --git a/arch/mips/include/asm/sn/kldir.h b/arch/mips/include/asm/sn/kldir.h
new file mode 100644
index 00000000000..1327e12e964
--- /dev/null
+++ b/arch/mips/include/asm/sn/kldir.h
@@ -0,0 +1,217 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/kldir.h>, revision 1.21.
+ *
+ * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 1999, 2000 by Ralf Baechle
+ */
+#ifndef _ASM_SN_KLDIR_H
+#define _ASM_SN_KLDIR_H
+
+
+/*
+ * The kldir memory area resides at a fixed place in each node's memory and
+ * provides pointers to most other IP27 memory areas. This allows us to
+ * resize and/or relocate memory areas at a later time without breaking all
+ * firmware and kernels that use them. Indices in the array are
+ * permanently dedicated to areas listed below. Some memory areas (marked
+ * below) reside at a permanently fixed location, but are included in the
+ * directory for completeness.
+ */
+
+#define KLDIR_MAGIC 0x434d5f53505f5357
+
+/*
+ * The upper portion of the memory map applies during boot
+ * only and is overwritten by IRIX/SYMMON.
+ *
+ * MEMORY MAP PER NODE
+ *
+ * 0x2000000 (32M) +-----------------------------------------+
+ * | IO6 BUFFERS FOR FLASH ENET IOC3 |
+ * 0x1F80000 (31.5M) +-----------------------------------------+
+ * | IO6 TEXT/DATA/BSS/stack |
+ * 0x1C00000 (30M) +-----------------------------------------+
+ * | IO6 PROM DEBUG TEXT/DATA/BSS/stack |
+ * 0x0800000 (28M) +-----------------------------------------+
+ * | IP27 PROM TEXT/DATA/BSS/stack |
+ * 0x1B00000 (27M) +-----------------------------------------+
+ * | IP27 CFG |
+ * 0x1A00000 (26M) +-----------------------------------------+
+ * | Graphics PROM |
+ * 0x1800000 (24M) +-----------------------------------------+
+ * | 3rd Party PROM drivers |
+ * 0x1600000 (22M) +-----------------------------------------+
+ * | |
+ * | Free |
+ * | |
+ * +-----------------------------------------+
+ * | UNIX DEBUG Version |
+ * 0x190000 (2M--) +-----------------------------------------+
+ * | SYMMON |
+ * | (For UNIX Debug only) |
+ * 0x34000 (208K) +-----------------------------------------+
+ * | SYMMON STACK [NUM_CPU_PER_NODE] |
+ * | (For UNIX Debug only) |
+ * 0x25000 (148K) +-----------------------------------------+
+ * | KLCONFIG - II (temp) |
+ * | |
+ * | ---------------------------- |
+ * | |
+ * | UNIX NON-DEBUG Version |
+ * 0x19000 (100K) +-----------------------------------------+
+ *
+ *
+ * The lower portion of the memory map contains information that is
+ * permanent and is used by the IP27PROM, IO6PROM and IRIX.
+ *
+ * 0x19000 (100K) +-----------------------------------------+
+ * | |
+ * | PI Error Spools (32K) |
+ * | |
+ * 0x12000 (72K) +-----------------------------------------+
+ * | Unused |
+ * 0x11c00 (71K) +-----------------------------------------+
+ * | CPU 1 NMI Eframe area |
+ * 0x11a00 (70.5K) +-----------------------------------------+
+ * | CPU 0 NMI Eframe area |
+ * 0x11800 (70K) +-----------------------------------------+
+ * | CPU 1 NMI Register save area |
+ * 0x11600 (69.5K) +-----------------------------------------+
+ * | CPU 0 NMI Register save area |
+ * 0x11400 (69K) +-----------------------------------------+
+ * | GDA (1k) |
+ * 0x11000 (68K) +-----------------------------------------+
+ * | Early cache Exception stack |
+ * | and/or |
+ * | kernel/io6prom nmi registers |
+ * 0x10800 (66k) +-----------------------------------------+
+ * | cache error eframe |
+ * 0x10400 (65K) +-----------------------------------------+
+ * | Exception Handlers (UALIAS copy) |
+ * 0x10000 (64K) +-----------------------------------------+
+ * | |
+ * | |
+ * | KLCONFIG - I (permanent) (48K) |
+ * | |
+ * | |
+ * | |
+ * 0x4000 (16K) +-----------------------------------------+
+ * | NMI Handler (Protected Page) |
+ * 0x3000 (12K) +-----------------------------------------+
+ * | ARCS PVECTORS (master node only) |
+ * 0x2c00 (11K) +-----------------------------------------+
+ * | ARCS TVECTORS (master node only) |
+ * 0x2800 (10K) +-----------------------------------------+
+ * | LAUNCH [NUM_CPU] |
+ * 0x2400 (9K) +-----------------------------------------+
+ * | Low memory directory (KLDIR) |
+ * 0x2000 (8K) +-----------------------------------------+
+ * | ARCS SPB (1K) |
+ * 0x1000 (4K) +-----------------------------------------+
+ * | Early cache Exception stack |
+ * | and/or |
+ * | kernel/io6prom nmi registers |
+ * 0x800 (2k) +-----------------------------------------+
+ * | cache error eframe |
+ * 0x400 (1K) +-----------------------------------------+
+ * | Exception Handlers |
+ * 0x0 (0K) +-----------------------------------------+
+ */
+
+#ifdef __ASSEMBLY__
+#define KLDIR_OFF_MAGIC 0x00
+#define KLDIR_OFF_OFFSET 0x08
+#define KLDIR_OFF_POINTER 0x10
+#define KLDIR_OFF_SIZE 0x18
+#define KLDIR_OFF_COUNT 0x20
+#define KLDIR_OFF_STRIDE 0x28
+#endif /* __ASSEMBLY__ */
+
+/*
+ * This is defined here because IP27_SYMMON_STK_SIZE must be at least what
+ * we define here. Since it's set up in the prom. We can't redefine it later
+ * and expect more space to be allocated. The way to find out the true size
+ * of the symmon stacks is to divide SYMMON_STK_SIZE by SYMMON_STK_STRIDE
+ * for a particular node.
+ */
+#define SYMMON_STACK_SIZE 0x8000
+
+#if defined(PROM)
+
+/*
+ * These defines are prom version dependent. No code other than the IP27
+ * prom should attempt to use these values.
+ */
+#define IP27_LAUNCH_OFFSET 0x2400
+#define IP27_LAUNCH_SIZE 0x400
+#define IP27_LAUNCH_COUNT 2
+#define IP27_LAUNCH_STRIDE 0x200
+
+#define IP27_KLCONFIG_OFFSET 0x4000
+#define IP27_KLCONFIG_SIZE 0xc000
+#define IP27_KLCONFIG_COUNT 1
+#define IP27_KLCONFIG_STRIDE 0
+
+#define IP27_NMI_OFFSET 0x3000
+#define IP27_NMI_SIZE 0x40
+#define IP27_NMI_COUNT 2
+#define IP27_NMI_STRIDE 0x40
+
+#define IP27_PI_ERROR_OFFSET 0x12000
+#define IP27_PI_ERROR_SIZE 0x4000
+#define IP27_PI_ERROR_COUNT 1
+#define IP27_PI_ERROR_STRIDE 0
+
+#define IP27_SYMMON_STK_OFFSET 0x25000
+#define IP27_SYMMON_STK_SIZE 0xe000
+#define IP27_SYMMON_STK_COUNT 2
+/* IP27_SYMMON_STK_STRIDE must be >= SYMMON_STACK_SIZE */
+#define IP27_SYMMON_STK_STRIDE 0x7000
+
+#define IP27_FREEMEM_OFFSET 0x19000
+#define IP27_FREEMEM_SIZE -1
+#define IP27_FREEMEM_COUNT 1
+#define IP27_FREEMEM_STRIDE 0
+
+#endif /* PROM */
+/*
+ * There will be only one of these in a partition so the IO6 must set it up.
+ */
+#define IO6_GDA_OFFSET 0x11000
+#define IO6_GDA_SIZE 0x400
+#define IO6_GDA_COUNT 1
+#define IO6_GDA_STRIDE 0
+
+/*
+ * save area of kernel nmi regs in the prom format
+ */
+#define IP27_NMI_KREGS_OFFSET 0x11400
+#define IP27_NMI_KREGS_CPU_SIZE 0x200
+/*
+ * save area of kernel nmi regs in eframe format
+ */
+#define IP27_NMI_EFRAME_OFFSET 0x11800
+#define IP27_NMI_EFRAME_SIZE 0x200
+
+#define KLDIR_ENT_SIZE 0x40
+#define KLDIR_MAX_ENTRIES (0x400 / 0x40)
+
+#ifndef __ASSEMBLY__
+typedef struct kldir_ent_s {
+ u64 magic; /* Indicates validity of entry */
+ off_t offset; /* Offset from start of node space */
+ unsigned long pointer; /* Pointer to area in some cases */
+ size_t size; /* Size in bytes */
+ u64 count; /* Repeat count if array, 1 if not */
+ size_t stride; /* Stride if array, 0 if not */
+ char rsvd[16]; /* Pad entry to 0x40 bytes */
+ /* NOTE: These 16 bytes are used in the Partition KLDIR
+ entry to store partition info. Refer to klpart.h for this. */
+} kldir_ent_t;
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_SN_KLDIR_H */
diff --git a/arch/mips/include/asm/sn/klkernvars.h b/arch/mips/include/asm/sn/klkernvars.h
new file mode 100644
index 00000000000..5de4c5e8ab3
--- /dev/null
+++ b/arch/mips/include/asm/sn/klkernvars.h
@@ -0,0 +1,29 @@
+/*
+ * File ported from IRIX to Linux by Kanoj Sarcar, 06/08/00.
+ * Copyright 2000 Silicon Graphics, Inc.
+ */
+#ifndef __ASM_SN_KLKERNVARS_H
+#define __ASM_SN_KLKERNVARS_H
+
+#define KV_MAGIC_OFFSET 0x0
+#define KV_RO_NASID_OFFSET 0x4
+#define KV_RW_NASID_OFFSET 0x6
+
+#define KV_MAGIC 0x5f4b565f
+
+#ifndef __ASSEMBLY__
+
+#include <asm/sn/types.h>
+
+typedef struct kern_vars_s {
+ int kv_magic;
+ nasid_t kv_ro_nasid;
+ nasid_t kv_rw_nasid;
+ unsigned long kv_ro_baseaddr;
+ unsigned long kv_rw_baseaddr;
+} kern_vars_t;
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __ASM_SN_KLKERNVARS_H */
+
diff --git a/arch/mips/include/asm/sn/launch.h b/arch/mips/include/asm/sn/launch.h
new file mode 100644
index 00000000000..b7c2226312c
--- /dev/null
+++ b/arch/mips/include/asm/sn/launch.h
@@ -0,0 +1,106 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2000 by Colin Ngam
+ */
+#ifndef _ASM_SN_LAUNCH_H
+#define _ASM_SN_LAUNCH_H
+
+#include <asm/sn/types.h>
+#include <asm/sn/addrs.h>
+
+/*
+ * The launch data structure resides at a fixed place in each node's memory
+ * and is used to communicate between the master processor and the slave
+ * processors.
+ *
+ * The master stores launch parameters in the launch structure
+ * corresponding to a target processor that is in a slave loop, then sends
+ * an interrupt to the slave processor. The slave calls the desired
+ * function, then returns to the slave loop. The master may poll or wait
+ * for the slaves to finish.
+ *
+ * There is an array of launch structures, one per CPU on the node. One
+ * interrupt level is used per local CPU.
+ */
+
+#define LAUNCH_MAGIC 0xaddbead2addbead3
+#ifdef CONFIG_SGI_IP27
+#define LAUNCH_SIZEOF 0x100
+#define LAUNCH_PADSZ 0xa0
+#endif
+
+#define LAUNCH_OFF_MAGIC 0x00 /* Struct offsets for assembly */
+#define LAUNCH_OFF_BUSY 0x08
+#define LAUNCH_OFF_CALL 0x10
+#define LAUNCH_OFF_CALLC 0x18
+#define LAUNCH_OFF_CALLPARM 0x20
+#define LAUNCH_OFF_STACK 0x28
+#define LAUNCH_OFF_GP 0x30
+#define LAUNCH_OFF_BEVUTLB 0x38
+#define LAUNCH_OFF_BEVNORMAL 0x40
+#define LAUNCH_OFF_BEVECC 0x48
+
+#define LAUNCH_STATE_DONE 0 /* Return value of LAUNCH_POLL */
+#define LAUNCH_STATE_SENT 1
+#define LAUNCH_STATE_RECD 2
+
+/*
+ * The launch routine is called only if the complement address is correct.
+ *
+ * Before control is transferred to a routine, the complement address
+ * is zeroed (invalidated) to prevent an accidental call from a spurious
+ * interrupt.
+ *
+ * The slave_launch routine turns on the BUSY flag, and the slave loop
+ * clears the BUSY flag after control is returned to it.
+ */
+
+#ifndef __ASSEMBLY__
+
+typedef int launch_state_t;
+typedef void (*launch_proc_t)(u64 call_parm);
+
+typedef struct launch_s {
+ volatile u64 magic; /* Magic number */
+ volatile u64 busy; /* Slave currently active */
+ volatile launch_proc_t call_addr; /* Func. for slave to call */
+ volatile u64 call_addr_c; /* 1's complement of call_addr*/
+ volatile u64 call_parm; /* Single parm passed to call*/
+ volatile void *stack_addr; /* Stack pointer for slave function */
+ volatile void *gp_addr; /* Global pointer for slave func. */
+ volatile char *bevutlb;/* Address of bev utlb ex handler */
+ volatile char *bevnormal;/*Address of bev normal ex handler */
+ volatile char *bevecc;/* Address of bev cache err handler */
+ volatile char pad[160]; /* Pad to LAUNCH_SIZEOF */
+} launch_t;
+
+/*
+ * PROM entry points for launch routines are determined by IPxxprom/start.s
+ */
+
+#define LAUNCH_SLAVE (*(void (*)(int nasid, int cpu, \
+ launch_proc_t call_addr, \
+ u64 call_parm, \
+ void *stack_addr, \
+ void *gp_addr)) \
+ IP27PROM_LAUNCHSLAVE)
+
+#define LAUNCH_WAIT (*(void (*)(int nasid, int cpu, int timeout_msec)) \
+ IP27PROM_WAITSLAVE)
+
+#define LAUNCH_POLL (*(launch_state_t (*)(int nasid, int cpu)) \
+ IP27PROM_POLLSLAVE)
+
+#define LAUNCH_LOOP (*(void (*)(void)) \
+ IP27PROM_SLAVELOOP)
+
+#define LAUNCH_FLASH (*(void (*)(void)) \
+ IP27PROM_FLASHLEDS)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_SN_LAUNCH_H */
diff --git a/arch/mips/include/asm/sn/mapped_kernel.h b/arch/mips/include/asm/sn/mapped_kernel.h
new file mode 100644
index 00000000000..721496a0bb9
--- /dev/null
+++ b/arch/mips/include/asm/sn/mapped_kernel.h
@@ -0,0 +1,54 @@
+/*
+ * File created by Kanoj Sarcar 06/06/00.
+ * Copyright 2000 Silicon Graphics, Inc.
+ */
+#ifndef __ASM_SN_MAPPED_KERNEL_H
+#define __ASM_SN_MAPPED_KERNEL_H
+
+#include <linux/mmzone.h>
+
+/*
+ * Note on how mapped kernels work: the text and data section is
+ * compiled at cksseg segment (LOADADDR = 0xc001c000), and the
+ * init/setup/data section gets a 16M virtual address bump in the
+ * ld.script file (so that tlblo0 and tlblo1 maps the sections).
+ * The vmlinux.64 section addresses are put in the xkseg range
+ * using the change-addresses makefile option. Use elfdump -of
+ * on IRIX to see where the sections go. The Origin loader loads
+ * the two sections contiguously in physical memory. The loader
+ * sets the entry point into kernel_entry using a xkphys address,
+ * but instead of using 0xa800000001160000, it uses the address
+ * 0xa800000000160000, which is where it physically loaded that
+ * code. So no jumps can be done before we have switched to using
+ * cksseg addresses.
+ */
+#include <asm/addrspace.h>
+
+#define REP_BASE CAC_BASE
+
+#ifdef CONFIG_MAPPED_KERNEL
+
+#define MAPPED_ADDR_RO_TO_PHYS(x) (x - REP_BASE)
+#define MAPPED_ADDR_RW_TO_PHYS(x) (x - REP_BASE - 16777216)
+
+#define MAPPED_KERN_RO_PHYSBASE(n) (hub_data(n)->kern_vars.kv_ro_baseaddr)
+#define MAPPED_KERN_RW_PHYSBASE(n) (hub_data(n)->kern_vars.kv_rw_baseaddr)
+
+#define MAPPED_KERN_RO_TO_PHYS(x) \
+ ((unsigned long)MAPPED_ADDR_RO_TO_PHYS(x) | \
+ MAPPED_KERN_RO_PHYSBASE(get_compact_nodeid()))
+#define MAPPED_KERN_RW_TO_PHYS(x) \
+ ((unsigned long)MAPPED_ADDR_RW_TO_PHYS(x) | \
+ MAPPED_KERN_RW_PHYSBASE(get_compact_nodeid()))
+
+#else /* CONFIG_MAPPED_KERNEL */
+
+#define MAPPED_KERN_RO_TO_PHYS(x) (x - REP_BASE)
+#define MAPPED_KERN_RW_TO_PHYS(x) (x - REP_BASE)
+
+#endif /* CONFIG_MAPPED_KERNEL */
+
+#define MAPPED_KERN_RO_TO_K0(x) PHYS_TO_K0(MAPPED_KERN_RO_TO_PHYS(x))
+#define MAPPED_KERN_RW_TO_K0(x) PHYS_TO_K0(MAPPED_KERN_RW_TO_PHYS(x))
+
+#endif /* __ASM_SN_MAPPED_KERNEL_H */
diff --git a/arch/mips/include/asm/sn/nmi.h b/arch/mips/include/asm/sn/nmi.h
new file mode 100644
index 00000000000..6b7b0b5f372
--- /dev/null
+++ b/arch/mips/include/asm/sn/nmi.h
@@ -0,0 +1,125 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997 Silicon Graphics, Inc.
+ */
+#ifndef __ASM_SN_NMI_H
+#define __ASM_SN_NMI_H
+
+#ident "$Revision: 1.5 $"
+
+#include <asm/sn/addrs.h>
+
+/*
+ * The launch data structure resides at a fixed place in each node's memory
+ * and is used to communicate between the master processor and the slave
+ * processors.
+ *
+ * The master stores launch parameters in the launch structure
+ * corresponding to a target processor that is in a slave loop, then sends
+ * an interrupt to the slave processor. The slave calls the desired
+ * function, followed by an optional rendezvous function, then returns to
+ * the slave loop. The master does not wait for the slaves before
+ * returning.
+ *
+ * There is an array of launch structures, one per CPU on the node. One
+ * interrupt level is used per CPU.
+ */
+
+#define NMI_MAGIC 0x48414d4d455201
+#define NMI_SIZEOF 0x40
+
+#define NMI_OFF_MAGIC 0x00 /* Struct offsets for assembly */
+#define NMI_OFF_FLAGS 0x08
+#define NMI_OFF_CALL 0x10
+#define NMI_OFF_CALLC 0x18
+#define NMI_OFF_CALLPARM 0x20
+#define NMI_OFF_GMASTER 0x28
+
+/*
+ * The NMI routine is called only if the complement address is
+ * correct.
+ *
+ * Before control is transferred to a routine, the complement address
+ * is zeroed (invalidated) to prevent an accidental call from a spurious
+ * interrupt.
+ *
+ */
+
+#ifndef __ASSEMBLY__
+
+typedef struct nmi_s {
+ volatile unsigned long magic; /* Magic number */
+ volatile unsigned long flags; /* Combination of flags above */
+ volatile void *call_addr; /* Routine for slave to call */
+ volatile void *call_addr_c; /* 1's complement of address */
+ volatile void *call_parm; /* Single parm passed to call */
+ volatile unsigned long gmaster; /* Flag true only on global master*/
+} nmi_t;
+
+#endif /* !__ASSEMBLY__ */
+
+/* Following definitions are needed both in the prom & the kernel
+ * to identify the format of the nmi cpu register save area in the
+ * low memory on each node.
+ */
+#ifndef __ASSEMBLY__
+
+struct reg_struct {
+ unsigned long gpr[32];
+ unsigned long sr;
+ unsigned long cause;
+ unsigned long epc;
+ unsigned long badva;
+ unsigned long error_epc;
+ unsigned long cache_err;
+ unsigned long nmi_sr;
+};
+
+#endif /* !__ASSEMBLY__ */
+
+/* These are the assembly language offsets into the reg_struct structure */
+
+#define R0_OFF 0x0
+#define R1_OFF 0x8
+#define R2_OFF 0x10
+#define R3_OFF 0x18
+#define R4_OFF 0x20
+#define R5_OFF 0x28
+#define R6_OFF 0x30
+#define R7_OFF 0x38
+#define R8_OFF 0x40
+#define R9_OFF 0x48
+#define R10_OFF 0x50
+#define R11_OFF 0x58
+#define R12_OFF 0x60
+#define R13_OFF 0x68
+#define R14_OFF 0x70
+#define R15_OFF 0x78
+#define R16_OFF 0x80
+#define R17_OFF 0x88
+#define R18_OFF 0x90
+#define R19_OFF 0x98
+#define R20_OFF 0xa0
+#define R21_OFF 0xa8
+#define R22_OFF 0xb0
+#define R23_OFF 0xb8
+#define R24_OFF 0xc0
+#define R25_OFF 0xc8
+#define R26_OFF 0xd0
+#define R27_OFF 0xd8
+#define R28_OFF 0xe0
+#define R29_OFF 0xe8
+#define R30_OFF 0xf0
+#define R31_OFF 0xf8
+#define SR_OFF 0x100
+#define CAUSE_OFF 0x108
+#define EPC_OFF 0x110
+#define BADVA_OFF 0x118
+#define ERROR_EPC_OFF 0x120
+#define CACHE_ERR_OFF 0x128
+#define NMISR_OFF 0x130
+
+#endif /* __ASM_SN_NMI_H */
diff --git a/arch/mips/include/asm/sn/sn0/addrs.h b/arch/mips/include/asm/sn/sn0/addrs.h
new file mode 100644
index 00000000000..b06190093bb
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/addrs.h
@@ -0,0 +1,288 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/addrs.h>, revision 1.126.
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_SN_SN0_ADDRS_H
+#define _ASM_SN_SN0_ADDRS_H
+
+
+/*
+ * SN0 (on a T5) Address map
+ *
+ * This file contains a set of definitions and macros which are used
+ * to reference into the major address spaces (CAC, HSPEC, IO, MSPEC,
+ * and UNCAC) used by the SN0 architecture. It also contains addresses
+ * for "major" statically locatable PROM/Kernel data structures, such as
+ * the partition table, the configuration data structure, etc.
+ * We make an implicit assumption that the processor using this file
+ * follows the R10K's provisions for specifying uncached attributes;
+ * should this change, the base registers may very well become processor-
+ * dependent.
+ *
+ * For more information on the address spaces, see the "Local Resources"
+ * chapter of the Hub specification.
+ *
+ * NOTE: This header file is included both by C and by assembler source
+ * files. Please bracket any language-dependent definitions
+ * appropriately.
+ */
+
+/*
+ * Some of the macros here need to be casted to appropriate types when used
+ * from C. They definitely must not be casted from assembly language so we
+ * use some new ANSI preprocessor stuff to paste these on where needed.
+ */
+
+/*
+ * The following couple of definitions will eventually need to be variables,
+ * since the amount of address space assigned to each node depends on
+ * whether the system is running in N-mode (more nodes with less memory)
+ * or M-mode (fewer nodes with more memory). We expect that it will
+ * be a while before we need to make this decision dynamically, though,
+ * so for now we just use defines bracketed by an ifdef.
+ */
+
+#ifdef CONFIG_SGI_SN_N_MODE
+
+#define NODE_SIZE_BITS 31
+#define BWIN_SIZE_BITS 28
+
+#define NASID_BITS 9
+#define NASID_BITMASK (0x1ffLL)
+#define NASID_SHFT 31
+#define NASID_META_BITS 5
+#define NASID_LOCAL_BITS 4
+
+#define BDDIR_UPPER_MASK (UINT64_CAST 0x7ffff << 10)
+#define BDECC_UPPER_MASK (UINT64_CAST 0x3ffffff << 3)
+
+#else /* !defined(CONFIG_SGI_SN_N_MODE), assume that M-mode is desired */
+
+#define NODE_SIZE_BITS 32
+#define BWIN_SIZE_BITS 29
+
+#define NASID_BITMASK (0xffLL)
+#define NASID_BITS 8
+#define NASID_SHFT 32
+#define NASID_META_BITS 4
+#define NASID_LOCAL_BITS 4
+
+#define BDDIR_UPPER_MASK (UINT64_CAST 0xfffff << 10)
+#define BDECC_UPPER_MASK (UINT64_CAST 0x7ffffff << 3)
+
+#endif /* !defined(CONFIG_SGI_SN_N_MODE) */
+
+#define NODE_ADDRSPACE_SIZE (UINT64_CAST 1 << NODE_SIZE_BITS)
+
+#define NASID_MASK (UINT64_CAST NASID_BITMASK << NASID_SHFT)
+#define NASID_GET(_pa) (int) ((UINT64_CAST (_pa) >> \
+ NASID_SHFT) & NASID_BITMASK)
+
+#if !defined(__ASSEMBLY__)
+
+#define NODE_SWIN_BASE(nasid, widget) \
+ ((widget == 0) ? NODE_BWIN_BASE((nasid), SWIN0_BIGWIN) \
+ : RAW_NODE_SWIN_BASE(nasid, widget))
+#else /* __ASSEMBLY__ */
+#define NODE_SWIN_BASE(nasid, widget) \
+ (NODE_IO_BASE(nasid) + (UINT64_CAST(widget) << SWIN_SIZE_BITS))
+#endif /* __ASSEMBLY__ */
+
+/*
+ * The following definitions pertain to the IO special address
+ * space. They define the location of the big and little windows
+ * of any given node.
+ */
+
+#define BWIN_INDEX_BITS 3
+#define BWIN_SIZE (UINT64_CAST 1 << BWIN_SIZE_BITS)
+#define BWIN_SIZEMASK (BWIN_SIZE - 1)
+#define BWIN_WIDGET_MASK 0x7
+#define NODE_BWIN_BASE0(nasid) (NODE_IO_BASE(nasid) + BWIN_SIZE)
+#define NODE_BWIN_BASE(nasid, bigwin) (NODE_BWIN_BASE0(nasid) + \
+ (UINT64_CAST(bigwin) << BWIN_SIZE_BITS))
+
+#define BWIN_WIDGETADDR(addr) ((addr) & BWIN_SIZEMASK)
+#define BWIN_WINDOWNUM(addr) (((addr) >> BWIN_SIZE_BITS) & BWIN_WIDGET_MASK)
+/*
+ * Verify if addr belongs to large window address of node with "nasid"
+ *
+ *
+ * NOTE: "addr" is expected to be XKPHYS address, and NOT physical
+ * address
+ *
+ *
+ */
+
+#define NODE_BWIN_ADDR(nasid, addr) \
+ (((addr) >= NODE_BWIN_BASE0(nasid)) && \
+ ((addr) < (NODE_BWIN_BASE(nasid, HUB_NUM_BIG_WINDOW) + \
+ BWIN_SIZE)))
+
+/*
+ * The following define the major position-independent aliases used
+ * in SN0.
+ * CALIAS -- Varies in size, points to the first n bytes of memory
+ * on the reader's node.
+ */
+
+#define CALIAS_BASE CAC_BASE
+
+
+
+#define BRIDGE_REG_PTR(_base, _off) ((volatile bridgereg_t *) \
+ ((__psunsigned_t)(_base) + (__psunsigned_t)(_off)))
+
+#define SN0_WIDGET_BASE(_nasid, _wid) (NODE_SWIN_BASE((_nasid), (_wid)))
+
+/* Turn on sable logging for the processors whose bits are set. */
+#define SABLE_LOG_TRIGGER(_map)
+
+#ifndef __ASSEMBLY__
+#define KERN_NMI_ADDR(nasid, slice) \
+ TO_NODE_UNCAC((nasid), IP27_NMI_KREGS_OFFSET + \
+ (IP27_NMI_KREGS_CPU_SIZE * (slice)))
+#endif /* !__ASSEMBLY__ */
+
+#ifdef PROM
+
+#define MISC_PROM_BASE PHYS_TO_K0(0x01300000)
+#define MISC_PROM_SIZE 0x200000
+
+#define DIAG_BASE PHYS_TO_K0(0x01500000)
+#define DIAG_SIZE 0x300000
+
+#define ROUTE_BASE PHYS_TO_K0(0x01800000)
+#define ROUTE_SIZE 0x200000
+
+#define IP27PROM_FLASH_HDR PHYS_TO_K0(0x01300000)
+#define IP27PROM_FLASH_DATA PHYS_TO_K0(0x01301000)
+#define IP27PROM_CORP_MAX 32
+#define IP27PROM_CORP PHYS_TO_K0(0x01800000)
+#define IP27PROM_CORP_SIZE 0x10000
+#define IP27PROM_CORP_STK PHYS_TO_K0(0x01810000)
+#define IP27PROM_CORP_STKSIZE 0x2000
+#define IP27PROM_DECOMP_BUF PHYS_TO_K0(0x01900000)
+#define IP27PROM_DECOMP_SIZE 0xfff00
+
+#define IP27PROM_BASE PHYS_TO_K0(0x01a00000)
+#define IP27PROM_BASE_MAPPED (UNCAC_BASE | 0x1fc00000)
+#define IP27PROM_SIZE_MAX 0x100000
+
+#define IP27PROM_PCFG PHYS_TO_K0(0x01b00000)
+#define IP27PROM_PCFG_SIZE 0xd0000
+#define IP27PROM_ERRDMP PHYS_TO_K1(0x01bd0000)
+#define IP27PROM_ERRDMP_SIZE 0xf000
+
+#define IP27PROM_INIT_START PHYS_TO_K1(0x01bd0000)
+#define IP27PROM_CONSOLE PHYS_TO_K1(0x01bdf000)
+#define IP27PROM_CONSOLE_SIZE 0x200
+#define IP27PROM_NETUART PHYS_TO_K1(0x01bdf200)
+#define IP27PROM_NETUART_SIZE 0x100
+#define IP27PROM_UNUSED1 PHYS_TO_K1(0x01bdf300)
+#define IP27PROM_UNUSED1_SIZE 0x500
+#define IP27PROM_ELSC_BASE_A PHYS_TO_K0(0x01bdf800)
+#define IP27PROM_ELSC_BASE_B PHYS_TO_K0(0x01bdfc00)
+#define IP27PROM_STACK_A PHYS_TO_K0(0x01be0000)
+#define IP27PROM_STACK_B PHYS_TO_K0(0x01bf0000)
+#define IP27PROM_STACK_SHFT 16
+#define IP27PROM_STACK_SIZE (1 << IP27PROM_STACK_SHFT)
+#define IP27PROM_INIT_END PHYS_TO_K0(0x01c00000)
+
+#define SLAVESTACK_BASE PHYS_TO_K0(0x01580000)
+#define SLAVESTACK_SIZE 0x40000
+
+#define ENETBUFS_BASE PHYS_TO_K0(0x01f80000)
+#define ENETBUFS_SIZE 0x20000
+
+#define IO6PROM_BASE PHYS_TO_K0(0x01c00000)
+#define IO6PROM_SIZE 0x400000
+#define IO6PROM_BASE_MAPPED (UNCAC_BASE | 0x11c00000)
+#define IO6DPROM_BASE PHYS_TO_K0(0x01c00000)
+#define IO6DPROM_SIZE 0x200000
+
+#define NODEBUGUNIX_ADDR PHYS_TO_K0(0x00019000)
+#define DEBUGUNIX_ADDR PHYS_TO_K0(0x00100000)
+
+#define IP27PROM_INT_LAUNCH 10 /* and 11 */
+#define IP27PROM_INT_NETUART 12 /* through 17 */
+
+#endif /* PROM */
+
+/*
+ * needed by symmon so it needs to be outside #if PROM
+ */
+#define IP27PROM_ELSC_SHFT 10
+#define IP27PROM_ELSC_SIZE (1 << IP27PROM_ELSC_SHFT)
+
+/*
+ * This address is used by IO6PROM to build MemoryDescriptors of
+ * free memory. This address is important since unix gets loaded
+ * at this address, and this memory has to be FREE if unix is to
+ * be loaded.
+ */
+
+#define FREEMEM_BASE PHYS_TO_K0(0x2000000)
+
+#define IO6PROM_STACK_SHFT 14 /* stack per cpu */
+#define IO6PROM_STACK_SIZE (1 << IO6PROM_STACK_SHFT)
+
+/*
+ * IP27 PROM vectors
+ */
+
+#define IP27PROM_ENTRY PHYS_TO_COMPATK1(0x1fc00000)
+#define IP27PROM_RESTART PHYS_TO_COMPATK1(0x1fc00008)
+#define IP27PROM_SLAVELOOP PHYS_TO_COMPATK1(0x1fc00010)
+#define IP27PROM_PODMODE PHYS_TO_COMPATK1(0x1fc00018)
+#define IP27PROM_IOC3UARTPOD PHYS_TO_COMPATK1(0x1fc00020)
+#define IP27PROM_FLASHLEDS PHYS_TO_COMPATK1(0x1fc00028)
+#define IP27PROM_REPOD PHYS_TO_COMPATK1(0x1fc00030)
+#define IP27PROM_LAUNCHSLAVE PHYS_TO_COMPATK1(0x1fc00038)
+#define IP27PROM_WAITSLAVE PHYS_TO_COMPATK1(0x1fc00040)
+#define IP27PROM_POLLSLAVE PHYS_TO_COMPATK1(0x1fc00048)
+
+#define KL_UART_BASE LOCAL_HUB_ADDR(MD_UREG0_0) /* base of UART regs */
+#define KL_UART_CMD LOCAL_HUB_ADDR(MD_UREG0_0) /* UART command reg */
+#define KL_UART_DATA LOCAL_HUB_ADDR(MD_UREG0_1) /* UART data reg */
+#define KL_I2C_REG MD_UREG0_0 /* I2C reg */
+
+#ifndef __ASSEMBLY__
+
+/* Address 0x400 to 0x1000 ualias points to cache error eframe + misc
+ * CACHE_ERR_SP_PTR could either contain an address to the stack, or
+ * the stack could start at CACHE_ERR_SP_PTR
+ */
+#if defined(HUB_ERR_STS_WAR)
+#define CACHE_ERR_EFRAME 0x480
+#else /* HUB_ERR_STS_WAR */
+#define CACHE_ERR_EFRAME 0x400
+#endif /* HUB_ERR_STS_WAR */
+
+#define CACHE_ERR_ECCFRAME (CACHE_ERR_EFRAME + EF_SIZE)
+#define CACHE_ERR_SP_PTR (0x1000 - 32) /* why -32? TBD */
+#define CACHE_ERR_IBASE_PTR (0x1000 - 40)
+#define CACHE_ERR_SP (CACHE_ERR_SP_PTR - 16)
+#define CACHE_ERR_AREA_SIZE (ARCS_SPB_OFFSET - CACHE_ERR_EFRAME)
+
+#endif /* !__ASSEMBLY__ */
+
+#define _ARCSPROM
+
+#if defined(HUB_ERR_STS_WAR)
+
+#define ERR_STS_WAR_REGISTER IIO_IIBUSERR
+#define ERR_STS_WAR_ADDR LOCAL_HUB_ADDR(IIO_IIBUSERR)
+#define ERR_STS_WAR_PHYSADDR TO_PHYS((__psunsigned_t)ERR_STS_WAR_ADDR)
+ /* Used to match addr in error reg. */
+#define OLD_ERR_STS_WAR_OFFSET ((MD_MEM_BANKS * MD_BANK_SIZE) - 0x100)
+
+#endif /* HUB_ERR_STS_WAR */
+
+#endif /* _ASM_SN_SN0_ADDRS_H */
diff --git a/arch/mips/include/asm/sn/sn0/arch.h b/arch/mips/include/asm/sn/sn0/arch.h
new file mode 100644
index 00000000000..f734f2007f2
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/arch.h
@@ -0,0 +1,72 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI IP27 specific setup.
+ *
+ * Copyright (C) 1995 - 1997, 1999 Silcon Graphics, Inc.
+ * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_SN_SN0_ARCH_H
+#define _ASM_SN_SN0_ARCH_H
+
+
+#ifndef SN0XXL /* 128 cpu SMP max */
+/*
+ * This is the maximum number of nodes that can be part of a kernel.
+ * Effectively, it's the maximum number of compact node ids (cnodeid_t).
+ */
+#define MAX_COMPACT_NODES 64
+
+/*
+ * MAXCPUS refers to the maximum number of CPUs in a single kernel.
+ * This is not necessarily the same as MAXNODES * CPUS_PER_NODE
+ */
+#define MAXCPUS 128
+
+#else /* SN0XXL system */
+
+#define MAX_COMPACT_NODES 128
+#define MAXCPUS 256
+
+#endif /* SN0XXL */
+
+/*
+ * This is the maximum number of NASIDS that can be present in a system.
+ * (Highest NASID plus one.)
+ */
+#define MAX_NASIDS 256
+
+/*
+ * MAX_REGIONS refers to the maximum number of hardware partitioned regions.
+ */
+#define MAX_REGIONS 64
+#define MAX_NONPREMIUM_REGIONS 16
+#define MAX_PREMIUM_REGIONS MAX_REGIONS
+
+/*
+ * MAX_PARITIONS refers to the maximum number of logically defined
+ * partitions the system can support.
+ */
+#define MAX_PARTITIONS MAX_REGIONS
+
+#define NASID_MASK_BYTES ((MAX_NASIDS + 7) / 8)
+
+/*
+ * Slot constants for SN0
+ */
+#ifdef CONFIG_SGI_SN_N_MODE
+#define MAX_MEM_SLOTS 16 /* max slots per node */
+#else /* !CONFIG_SGI_SN_N_MODE, assume CONFIG_SGI_SN_M_MODE */
+#define MAX_MEM_SLOTS 32 /* max slots per node */
+#endif /* CONFIG_SGI_SN_M_MODE */
+
+#define SLOT_SHIFT (27)
+#define SLOT_MIN_MEM_SIZE (32*1024*1024)
+
+#define CPUS_PER_NODE 2 /* CPUs on a single hub */
+#define CPUS_PER_NODE_SHFT 1 /* Bits to shift in the node number */
+#define CPUS_PER_SUBNODE 2 /* CPUs on a single hub PI */
+
+#endif /* _ASM_SN_SN0_ARCH_H */
diff --git a/arch/mips/include/asm/sn/sn0/hub.h b/arch/mips/include/asm/sn/sn0/hub.h
new file mode 100644
index 00000000000..3e228f8e796
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/hub.h
@@ -0,0 +1,40 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_SN_SN0_HUB_H
+#define _ASM_SN_SN0_HUB_H
+
+/* The secret password; used to release protection */
+#define HUB_PASSWORD 0x53474972756c6573ull
+
+#define CHIPID_HUB 0
+#define CHIPID_ROUTER 1
+
+#define HUB_REV_1_0 1
+#define HUB_REV_2_0 2
+#define HUB_REV_2_1 3
+#define HUB_REV_2_2 4
+#define HUB_REV_2_3 5
+#define HUB_REV_2_4 6
+
+#define MAX_HUB_PATH 80
+
+#include <asm/sn/sn0/addrs.h>
+#include <asm/sn/sn0/hubpi.h>
+#include <asm/sn/sn0/hubmd.h>
+#include <asm/sn/sn0/hubio.h>
+#include <asm/sn/sn0/hubni.h>
+//#include <asm/sn/sn0/hubcore.h>
+
+/* Translation of uncached attributes */
+#define UATTR_HSPEC 0
+#define UATTR_IO 1
+#define UATTR_MSPEC 2
+#define UATTR_UNCAC 3
+
+#endif /* _ASM_SN_SN0_HUB_H */
diff --git a/arch/mips/include/asm/sn/sn0/hubio.h b/arch/mips/include/asm/sn/sn0/hubio.h
new file mode 100644
index 00000000000..d0c29d4de08
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/hubio.h
@@ -0,0 +1,972 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/hubio.h>, Revision 1.80.
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_SGI_SN_SN0_HUBIO_H
+#define _ASM_SGI_SN_SN0_HUBIO_H
+
+/*
+ * Hub I/O interface registers
+ *
+ * All registers in this file are subject to change until Hub chip tapeout.
+ * In general, the longer software name should be used when available.
+ */
+
+/*
+ * Slightly friendlier names for some common registers.
+ * The hardware definitions follow.
+ */
+#define IIO_WIDGET IIO_WID /* Widget identification */
+#define IIO_WIDGET_STAT IIO_WSTAT /* Widget status register */
+#define IIO_WIDGET_CTRL IIO_WCR /* Widget control register */
+#define IIO_WIDGET_TOUT IIO_WRTO /* Widget request timeout */
+#define IIO_WIDGET_FLUSH IIO_WTFR /* Widget target flush */
+#define IIO_PROTECT IIO_ILAPR /* IO interface protection */
+#define IIO_PROTECT_OVRRD IIO_ILAPO /* IO protect override */
+#define IIO_OUTWIDGET_ACCESS IIO_IOWA /* Outbound widget access */
+#define IIO_INWIDGET_ACCESS IIO_IIWA /* Inbound widget access */
+#define IIO_INDEV_ERR_MASK IIO_IIDEM /* Inbound device error mask */
+#define IIO_LLP_CSR IIO_ILCSR /* LLP control and status */
+#define IIO_LLP_LOG IIO_ILLR /* LLP log */
+#define IIO_XTALKCC_TOUT IIO_IXCC /* Xtalk credit count timeout*/
+#define IIO_XTALKTT_TOUT IIO_IXTT /* Xtalk tail timeout */
+#define IIO_IO_ERR_CLR IIO_IECLR /* IO error clear */
+#define IIO_BTE_CRB_CNT IIO_IBCN /* IO BTE CRB count */
+
+#define IIO_LLP_CSR_IS_UP 0x00002000
+#define IIO_LLP_CSR_LLP_STAT_MASK 0x00003000
+#define IIO_LLP_CSR_LLP_STAT_SHFT 12
+
+/* key to IIO_PROTECT_OVRRD */
+#define IIO_PROTECT_OVRRD_KEY 0x53474972756c6573ull /* "SGIrules" */
+
+/* BTE register names */
+#define IIO_BTE_STAT_0 IIO_IBLS_0 /* Also BTE length/status 0 */
+#define IIO_BTE_SRC_0 IIO_IBSA_0 /* Also BTE source address 0 */
+#define IIO_BTE_DEST_0 IIO_IBDA_0 /* Also BTE dest. address 0 */
+#define IIO_BTE_CTRL_0 IIO_IBCT_0 /* Also BTE control/terminate 0 */
+#define IIO_BTE_NOTIFY_0 IIO_IBNA_0 /* Also BTE notification 0 */
+#define IIO_BTE_INT_0 IIO_IBIA_0 /* Also BTE interrupt 0 */
+#define IIO_BTE_OFF_0 0 /* Base offset from BTE 0 regs. */
+#define IIO_BTE_OFF_1 IIO_IBLS_1 - IIO_IBLS_0 /* Offset from base to BTE 1 */
+
+/* BTE register offsets from base */
+#define BTEOFF_STAT 0
+#define BTEOFF_SRC (IIO_BTE_SRC_0 - IIO_BTE_STAT_0)
+#define BTEOFF_DEST (IIO_BTE_DEST_0 - IIO_BTE_STAT_0)
+#define BTEOFF_CTRL (IIO_BTE_CTRL_0 - IIO_BTE_STAT_0)
+#define BTEOFF_NOTIFY (IIO_BTE_NOTIFY_0 - IIO_BTE_STAT_0)
+#define BTEOFF_INT (IIO_BTE_INT_0 - IIO_BTE_STAT_0)
+
+
+/*
+ * The following definitions use the names defined in the IO interface
+ * document for ease of reference. When possible, software should
+ * generally use the longer but clearer names defined above.
+ */
+
+#define IIO_BASE 0x400000
+#define IIO_BASE_BTE0 0x410000
+#define IIO_BASE_BTE1 0x420000
+#define IIO_BASE_PERF 0x430000
+#define IIO_PERF_CNT 0x430008
+
+#define IO_PERF_SETS 32
+
+#define IIO_WID 0x400000 /* Widget identification */
+#define IIO_WSTAT 0x400008 /* Widget status */
+#define IIO_WCR 0x400020 /* Widget control */
+
+#define IIO_WSTAT_ECRAZY (1ULL << 32) /* Hub gone crazy */
+#define IIO_WSTAT_TXRETRY (1ULL << 9) /* Hub Tx Retry timeout */
+#define IIO_WSTAT_TXRETRY_MASK (0x7F)
+#define IIO_WSTAT_TXRETRY_SHFT (16)
+#define IIO_WSTAT_TXRETRY_CNT(w) (((w) >> IIO_WSTAT_TXRETRY_SHFT) & \
+ IIO_WSTAT_TXRETRY_MASK)
+
+#define IIO_ILAPR 0x400100 /* Local Access Protection */
+#define IIO_ILAPO 0x400108 /* Protection override */
+#define IIO_IOWA 0x400110 /* outbound widget access */
+#define IIO_IIWA 0x400118 /* inbound widget access */
+#define IIO_IIDEM 0x400120 /* Inbound Device Error Mask */
+#define IIO_ILCSR 0x400128 /* LLP control and status */
+#define IIO_ILLR 0x400130 /* LLP Log */
+#define IIO_IIDSR 0x400138 /* Interrupt destination */
+
+#define IIO_IIBUSERR 0x1400208 /* Reads here cause a bus error. */
+
+/* IO Interrupt Destination Register */
+#define IIO_IIDSR_SENT_SHIFT 28
+#define IIO_IIDSR_SENT_MASK 0x10000000
+#define IIO_IIDSR_ENB_SHIFT 24
+#define IIO_IIDSR_ENB_MASK 0x01000000
+#define IIO_IIDSR_NODE_SHIFT 8
+#define IIO_IIDSR_NODE_MASK 0x0000ff00
+#define IIO_IIDSR_LVL_SHIFT 0
+#define IIO_IIDSR_LVL_MASK 0x0000003f
+
+
+/* GFX Flow Control Node/Widget Register */
+#define IIO_IGFX_0 0x400140 /* gfx node/widget register 0 */
+#define IIO_IGFX_1 0x400148 /* gfx node/widget register 1 */
+#define IIO_IGFX_W_NUM_BITS 4 /* size of widget num field */
+#define IIO_IGFX_W_NUM_MASK ((1<<IIO_IGFX_W_NUM_BITS)-1)
+#define IIO_IGFX_W_NUM_SHIFT 0
+#define IIO_IGFX_N_NUM_BITS 9 /* size of node num field */
+#define IIO_IGFX_N_NUM_MASK ((1<<IIO_IGFX_N_NUM_BITS)-1)
+#define IIO_IGFX_N_NUM_SHIFT 4
+#define IIO_IGFX_P_NUM_BITS 1 /* size of processor num field */
+#define IIO_IGFX_P_NUM_MASK ((1<<IIO_IGFX_P_NUM_BITS)-1)
+#define IIO_IGFX_P_NUM_SHIFT 16
+#define IIO_IGFX_VLD_BITS 1 /* size of valid field */
+#define IIO_IGFX_VLD_MASK ((1<<IIO_IGFX_VLD_BITS)-1)
+#define IIO_IGFX_VLD_SHIFT 20
+#define IIO_IGFX_INIT(widget, node, cpu, valid) (\
+ (((widget) & IIO_IGFX_W_NUM_MASK) << IIO_IGFX_W_NUM_SHIFT) | \
+ (((node) & IIO_IGFX_N_NUM_MASK) << IIO_IGFX_N_NUM_SHIFT) | \
+ (((cpu) & IIO_IGFX_P_NUM_MASK) << IIO_IGFX_P_NUM_SHIFT) | \
+ (((valid) & IIO_IGFX_VLD_MASK) << IIO_IGFX_VLD_SHIFT) )
+
+/* Scratch registers (not all bits available) */
+#define IIO_SCRATCH_REG0 0x400150
+#define IIO_SCRATCH_REG1 0x400158
+#define IIO_SCRATCH_MASK 0x0000000f00f11fff
+
+#define IIO_SCRATCH_BIT0_0 0x0000000800000000
+#define IIO_SCRATCH_BIT0_1 0x0000000400000000
+#define IIO_SCRATCH_BIT0_2 0x0000000200000000
+#define IIO_SCRATCH_BIT0_3 0x0000000100000000
+#define IIO_SCRATCH_BIT0_4 0x0000000000800000
+#define IIO_SCRATCH_BIT0_5 0x0000000000400000
+#define IIO_SCRATCH_BIT0_6 0x0000000000200000
+#define IIO_SCRATCH_BIT0_7 0x0000000000100000
+#define IIO_SCRATCH_BIT0_8 0x0000000000010000
+#define IIO_SCRATCH_BIT0_9 0x0000000000001000
+#define IIO_SCRATCH_BIT0_R 0x0000000000000fff
+
+/* IO Translation Table Entries */
+#define IIO_NUM_ITTES 7 /* ITTEs numbered 0..6 */
+ /* Hw manuals number them 1..7! */
+
+/*
+ * As a permanent workaround for a bug in the PI side of the hub, we've
+ * redefined big window 7 as small window 0.
+ */
+#define HUB_NUM_BIG_WINDOW IIO_NUM_ITTES - 1
+
+/*
+ * Use the top big window as a surrogate for the first small window
+ */
+#define SWIN0_BIGWIN HUB_NUM_BIG_WINDOW
+
+#define ILCSR_WARM_RESET 0x100
+/*
+ * The IO LLP control status register and widget control register
+ */
+#ifndef __ASSEMBLY__
+
+typedef union hubii_wid_u {
+ u64 wid_reg_value;
+ struct {
+ u64 wid_rsvd: 32, /* unused */
+ wid_rev_num: 4, /* revision number */
+ wid_part_num: 16, /* the widget type: hub=c101 */
+ wid_mfg_num: 11, /* Manufacturer id (IBM) */
+ wid_rsvd1: 1; /* Reserved */
+ } wid_fields_s;
+} hubii_wid_t;
+
+
+typedef union hubii_wcr_u {
+ u64 wcr_reg_value;
+ struct {
+ u64 wcr_rsvd: 41, /* unused */
+ wcr_e_thresh: 5, /* elasticity threshold */
+ wcr_dir_con: 1, /* widget direct connect */
+ wcr_f_bad_pkt: 1, /* Force bad llp pkt enable */
+ wcr_xbar_crd: 3, /* LLP crossbar credit */
+ wcr_rsvd1: 8, /* Reserved */
+ wcr_tag_mode: 1, /* Tag mode */
+ wcr_widget_id: 4; /* LLP crossbar credit */
+ } wcr_fields_s;
+} hubii_wcr_t;
+
+#define iwcr_dir_con wcr_fields_s.wcr_dir_con
+
+typedef union hubii_wstat_u {
+ u64 reg_value;
+ struct {
+ u64 rsvd1: 31,
+ crazy: 1, /* Crazy bit */
+ rsvd2: 8,
+ llp_tx_cnt: 8, /* LLP Xmit retry counter */
+ rsvd3: 6,
+ tx_max_rtry: 1, /* LLP Retry Timeout Signal */
+ rsvd4: 2,
+ xt_tail_to: 1, /* Xtalk Tail Timeout */
+ xt_crd_to: 1, /* Xtalk Credit Timeout */
+ pending: 4; /* Pending Requests */
+ } wstat_fields_s;
+} hubii_wstat_t;
+
+
+typedef union hubii_ilcsr_u {
+ u64 icsr_reg_value;
+ struct {
+ u64 icsr_rsvd: 22, /* unused */
+ icsr_max_burst: 10, /* max burst */
+ icsr_rsvd4: 6, /* reserved */
+ icsr_max_retry: 10, /* max retry */
+ icsr_rsvd3: 2, /* reserved */
+ icsr_lnk_stat: 2, /* link status */
+ icsr_bm8: 1, /* Bit mode 8 */
+ icsr_llp_en: 1, /* LLP enable bit */
+ icsr_rsvd2: 1, /* reserver */
+ icsr_wrm_reset: 1, /* Warm reset bit */
+ icsr_rsvd1: 2, /* Data ready offset */
+ icsr_null_to: 6; /* Null timeout */
+
+ } icsr_fields_s;
+} hubii_ilcsr_t;
+
+
+typedef union hubii_iowa_u {
+ u64 iowa_reg_value;
+ struct {
+ u64 iowa_rsvd: 48, /* unused */
+ iowa_wxoac: 8, /* xtalk widget access bits */
+ iowa_rsvd1: 7, /* xtalk widget access bits */
+ iowa_w0oac: 1; /* xtalk widget access bits */
+ } iowa_fields_s;
+} hubii_iowa_t;
+
+typedef union hubii_iiwa_u {
+ u64 iiwa_reg_value;
+ struct {
+ u64 iiwa_rsvd: 48, /* unused */
+ iiwa_wxiac: 8, /* hub wid access bits */
+ iiwa_rsvd1: 7, /* reserved */
+ iiwa_w0iac: 1; /* hub wid0 access */
+ } iiwa_fields_s;
+} hubii_iiwa_t;
+
+typedef union hubii_illr_u {
+ u64 illr_reg_value;
+ struct {
+ u64 illr_rsvd: 32, /* unused */
+ illr_cb_cnt: 16, /* checkbit error count */
+ illr_sn_cnt: 16; /* sequence number count */
+ } illr_fields_s;
+} hubii_illr_t;
+
+/* The structures below are defined to extract and modify the ii
+performance registers */
+
+/* io_perf_sel allows the caller to specify what tests will be
+ performed */
+typedef union io_perf_sel {
+ u64 perf_sel_reg;
+ struct {
+ u64 perf_rsvd : 48,
+ perf_icct : 8,
+ perf_ippr1 : 4,
+ perf_ippr0 : 4;
+ } perf_sel_bits;
+} io_perf_sel_t;
+
+/* io_perf_cnt is to extract the count from the hub registers. Due to
+ hardware problems there is only one counter, not two. */
+
+typedef union io_perf_cnt {
+ u64 perf_cnt;
+ struct {
+ u64 perf_rsvd1 : 32,
+ perf_rsvd2 : 12,
+ perf_cnt : 20;
+ } perf_cnt_bits;
+} io_perf_cnt_t;
+
+#endif /* !__ASSEMBLY__ */
+
+
+#define LNK_STAT_WORKING 0x2
+
+#define IIO_LLP_CB_MAX 0xffff
+#define IIO_LLP_SN_MAX 0xffff
+
+/* IO PRB Entries */
+#define IIO_NUM_IPRBS (9)
+#define IIO_IOPRB_0 0x400198 /* PRB entry 0 */
+#define IIO_IOPRB_8 0x4001a0 /* PRB entry 8 */
+#define IIO_IOPRB_9 0x4001a8 /* PRB entry 9 */
+#define IIO_IOPRB_A 0x4001b0 /* PRB entry a */
+#define IIO_IOPRB_B 0x4001b8 /* PRB entry b */
+#define IIO_IOPRB_C 0x4001c0 /* PRB entry c */
+#define IIO_IOPRB_D 0x4001c8 /* PRB entry d */
+#define IIO_IOPRB_E 0x4001d0 /* PRB entry e */
+#define IIO_IOPRB_F 0x4001d8 /* PRB entry f */
+
+
+#define IIO_IXCC 0x4001e0 /* Crosstalk credit count timeout */
+#define IIO_IXTCC IIO_IXCC
+#define IIO_IMEM 0x4001e8 /* Miscellaneous Enable Mask */
+#define IIO_IXTT 0x4001f0 /* Crosstalk tail timeout */
+#define IIO_IECLR 0x4001f8 /* IO error clear */
+#define IIO_IBCN 0x400200 /* IO BTE CRB count */
+
+/*
+ * IIO_IMEM Register fields.
+ */
+#define IIO_IMEM_W0ESD 0x1 /* Widget 0 shut down due to error */
+#define IIO_IMEM_B0ESD (1 << 4) /* BTE 0 shut down due to error */
+#define IIO_IMEM_B1ESD (1 << 8) /* BTE 1 Shut down due to error */
+
+/* PIO Read address Table Entries */
+#define IIO_IPCA 0x400300 /* PRB Counter adjust */
+#define IIO_NUM_PRTES 8 /* Total number of PRB table entries */
+#define IIO_PRTE_0 0x400308 /* PIO Read address table entry 0 */
+#define IIO_PRTE(_x) (IIO_PRTE_0 + (8 * (_x)))
+#define IIO_WIDPRTE(x) IIO_PRTE(((x) - 8)) /* widget ID to its PRTE num */
+#define IIO_IPDR 0x400388 /* PIO table entry deallocation */
+#define IIO_ICDR 0x400390 /* CRB Entry Deallocation */
+#define IIO_IFDR 0x400398 /* IOQ FIFO Depth */
+#define IIO_IIAP 0x4003a0 /* IIQ Arbitration Parameters */
+#define IIO_IMMR IIO_IIAP
+#define IIO_ICMR 0x4003a8 /* CRB Management Register */
+#define IIO_ICCR 0x4003b0 /* CRB Control Register */
+#define IIO_ICTO 0x4003b8 /* CRB Time Out Register */
+#define IIO_ICTP 0x4003c0 /* CRB Time Out Prescalar */
+
+
+/*
+ * ICMR register fields
+ */
+#define IIO_ICMR_PC_VLD_SHFT 36
+#define IIO_ICMR_PC_VLD_MASK (0x7fffUL << IIO_ICMR_PC_VLD_SHFT)
+
+#define IIO_ICMR_CRB_VLD_SHFT 20
+#define IIO_ICMR_CRB_VLD_MASK (0x7fffUL << IIO_ICMR_CRB_VLD_SHFT)
+
+#define IIO_ICMR_FC_CNT_SHFT 16
+#define IIO_ICMR_FC_CNT_MASK (0xf << IIO_ICMR_FC_CNT_SHFT)
+
+#define IIO_ICMR_C_CNT_SHFT 4
+#define IIO_ICMR_C_CNT_MASK (0xf << IIO_ICMR_C_CNT_SHFT)
+
+#define IIO_ICMR_P_CNT_SHFT 0
+#define IIO_ICMR_P_CNT_MASK (0xf << IIO_ICMR_P_CNT_SHFT)
+
+#define IIO_ICMR_PRECISE (1UL << 52)
+#define IIO_ICMR_CLR_RPPD (1UL << 13)
+#define IIO_ICMR_CLR_RQPD (1UL << 12)
+
+/*
+ * IIO PIO Deallocation register field masks : (IIO_IPDR)
+ */
+#define IIO_IPDR_PND (1 << 4)
+
+/*
+ * IIO CRB deallocation register field masks: (IIO_ICDR)
+ */
+#define IIO_ICDR_PND (1 << 4)
+
+/*
+ * IIO CRB control register Fields: IIO_ICCR
+ */
+#define IIO_ICCR_PENDING (0x10000)
+#define IIO_ICCR_CMD_MASK (0xFF)
+#define IIO_ICCR_CMD_SHFT (7)
+#define IIO_ICCR_CMD_NOP (0x0) /* No Op */
+#define IIO_ICCR_CMD_WAKE (0x100) /* Reactivate CRB entry and process */
+#define IIO_ICCR_CMD_TIMEOUT (0x200) /* Make CRB timeout & mark invalid */
+#define IIO_ICCR_CMD_EJECT (0x400) /* Contents of entry written to memory
+ * via a WB
+ */
+#define IIO_ICCR_CMD_FLUSH (0x800)
+
+/*
+ * CRB manipulation macros
+ * The CRB macros are slightly complicated, since there are up to
+ * four registers associated with each CRB entry.
+ */
+#define IIO_NUM_CRBS 15 /* Number of CRBs */
+#define IIO_NUM_NORMAL_CRBS 12 /* Number of regular CRB entries */
+#define IIO_NUM_PC_CRBS 4 /* Number of partial cache CRBs */
+#define IIO_ICRB_OFFSET 8
+#define IIO_ICRB_0 0x400400
+/* XXX - This is now tuneable:
+ #define IIO_FIRST_PC_ENTRY 12
+ */
+
+#define IIO_ICRB_A(_x) (IIO_ICRB_0 + (4 * IIO_ICRB_OFFSET * (_x)))
+#define IIO_ICRB_B(_x) (IIO_ICRB_A(_x) + 1*IIO_ICRB_OFFSET)
+#define IIO_ICRB_C(_x) (IIO_ICRB_A(_x) + 2*IIO_ICRB_OFFSET)
+#define IIO_ICRB_D(_x) (IIO_ICRB_A(_x) + 3*IIO_ICRB_OFFSET)
+
+/* XXX - IBUE register coming for Hub 2 */
+
+/*
+ *
+ * CRB Register description.
+ *
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ *
+ * Many of the fields in CRB are status bits used by hardware
+ * for implementation of the protocol. It's very dangerous to
+ * mess around with the CRB registers.
+ *
+ * It's OK to read the CRB registers and try to make sense out of the
+ * fields in CRB.
+ *
+ * Updating CRB requires all activities in Hub IIO to be quiesced.
+ * otherwise, a write to CRB could corrupt other CRB entries.
+ * CRBs are here only as a back door peek to hub IIO's status.
+ * Quiescing implies no dmas no PIOs
+ * either directly from the cpu or from sn0net.
+ * this is not something that can be done easily. So, AVOID updating
+ * CRBs.
+ */
+
+/*
+ * Fields in CRB Register A
+ */
+#ifndef __ASSEMBLY__
+typedef union icrba_u {
+ u64 reg_value;
+ struct {
+ u64 resvd: 6,
+ stall_bte0: 1, /* Stall BTE 0 */
+ stall_bte1: 1, /* Stall BTE 1 */
+ error: 1, /* CRB has an error */
+ ecode: 3, /* Error Code */
+ lnetuce: 1, /* SN0net Uncorrectable error */
+ mark: 1, /* CRB Has been marked */
+ xerr: 1, /* Error bit set in xtalk header */
+ sidn: 4, /* SIDN field from xtalk */
+ tnum: 5, /* TNUM field in xtalk */
+ addr: 38, /* Address of request */
+ valid: 1, /* Valid status */
+ iow: 1; /* IO Write operation */
+ } icrba_fields_s;
+} icrba_t;
+
+/* This is an alternate typedef for the HUB1 CRB A in order to allow
+ runtime selection of the format based on the REV_ID field of the
+ NI_STATUS_REV_ID register. */
+typedef union h1_icrba_u {
+ u64 reg_value;
+
+ struct {
+ u64 resvd: 6,
+ unused: 1, /* Unused but RW!! */
+ error: 1, /* CRB has an error */
+ ecode: 4, /* Error Code */
+ lnetuce: 1, /* SN0net Uncorrectable error */
+ mark: 1, /* CRB Has been marked */
+ xerr: 1, /* Error bit set in xtalk header */
+ sidn: 4, /* SIDN field from xtalk */
+ tnum: 5, /* TNUM field in xtalk */
+ addr: 38, /* Address of request */
+ valid: 1, /* Valid status */
+ iow: 1; /* IO Write operation */
+ } h1_icrba_fields_s;
+} h1_icrba_t;
+
+/* XXX - Is this still right? Check the spec. */
+#define ICRBN_A_CERR_SHFT 54
+#define ICRBN_A_ERR_MASK 0x3ff
+
+#endif /* !__ASSEMBLY__ */
+
+#define IIO_ICRB_ADDR_SHFT 2 /* Shift to get proper address */
+
+/*
+ * values for "ecode" field
+ */
+#define IIO_ICRB_ECODE_DERR 0 /* Directory error due to IIO access */
+#define IIO_ICRB_ECODE_PERR 1 /* Poison error on IO access */
+#define IIO_ICRB_ECODE_WERR 2 /* Write error by IIO access
+ * e.g. WINV to a Read only line.
+ */
+#define IIO_ICRB_ECODE_AERR 3 /* Access error caused by IIO access */
+#define IIO_ICRB_ECODE_PWERR 4 /* Error on partial write */
+#define IIO_ICRB_ECODE_PRERR 5 /* Error on partial read */
+#define IIO_ICRB_ECODE_TOUT 6 /* CRB timeout before deallocating */
+#define IIO_ICRB_ECODE_XTERR 7 /* Incoming xtalk pkt had error bit */
+
+
+
+/*
+ * Fields in CRB Register B
+ */
+#ifndef __ASSEMBLY__
+typedef union icrbb_u {
+ u64 reg_value;
+ struct {
+ u64 rsvd1: 5,
+ btenum: 1, /* BTE to which entry belongs to */
+ cohtrans: 1, /* Coherent transaction */
+ xtsize: 2, /* Xtalk operation size
+ * 0: Double Word
+ * 1: 32 Bytes.
+ * 2: 128 Bytes,
+ * 3: Reserved.
+ */
+ srcnode: 9, /* Source Node ID */
+ srcinit: 2, /* Source Initiator:
+ * See below for field values.
+ */
+ useold: 1, /* Use OLD command for processing */
+ imsgtype: 2, /* Incoming message type
+ * see below for field values
+ */
+ imsg: 8, /* Incoming message */
+ initator: 3, /* Initiator of original request
+ * See below for field values.
+ */
+ reqtype: 5, /* Identifies type of request
+ * See below for field values.
+ */
+ rsvd2: 7,
+ ackcnt: 11, /* Invalidate ack count */
+ resp: 1, /* data response given to processor */
+ ack: 1, /* indicates data ack received */
+ hold: 1, /* entry is gathering inval acks */
+ wb_pend:1, /* waiting for writeback to complete */
+ intvn: 1, /* Intervention */
+ stall_ib: 1, /* Stall Ibuf (from crosstalk) */
+ stall_intr: 1; /* Stall internal interrupts */
+ } icrbb_field_s;
+} icrbb_t;
+
+/* This is an alternate typedef for the HUB1 CRB B in order to allow
+ runtime selection of the format based on the REV_ID field of the
+ NI_STATUS_REV_ID register. */
+typedef union h1_icrbb_u {
+ u64 reg_value;
+ struct {
+ u64 rsvd1: 5,
+ btenum: 1, /* BTE to which entry belongs to */
+ cohtrans: 1, /* Coherent transaction */
+ xtsize: 2, /* Xtalk operation size
+ * 0: Double Word
+ * 1: 32 Bytes.
+ * 2: 128 Bytes,
+ * 3: Reserved.
+ */
+ srcnode: 9, /* Source Node ID */
+ srcinit: 2, /* Source Initiator:
+ * See below for field values.
+ */
+ useold: 1, /* Use OLD command for processing */
+ imsgtype: 2, /* Incoming message type
+ * see below for field values
+ */
+ imsg: 8, /* Incoming message */
+ initator: 3, /* Initiator of original request
+ * See below for field values.
+ */
+ rsvd2: 1,
+ pcache: 1, /* entry belongs to partial cache */
+ reqtype: 5, /* Identifies type of request
+ * See below for field values.
+ */
+ stl_ib: 1, /* stall Ibus coming from xtalk */
+ stl_intr: 1, /* Stall internal interrupts */
+ stl_bte0: 1, /* Stall BTE 0 */
+ stl_bte1: 1, /* Stall BTE 1 */
+ intrvn: 1, /* Req was target of intervention */
+ ackcnt: 11, /* Invalidate ack count */
+ resp: 1, /* data response given to processor */
+ ack: 1, /* indicates data ack received */
+ hold: 1, /* entry is gathering inval acks */
+ wb_pend:1, /* waiting for writeback to complete */
+ sleep: 1, /* xtalk req sleeping till IO-sync */
+ pnd_reply: 1, /* replies not issed due to IOQ full */
+ pnd_req: 1; /* reqs not issued due to IOQ full */
+ } h1_icrbb_field_s;
+} h1_icrbb_t;
+
+
+#define b_imsgtype icrbb_field_s.imsgtype
+#define b_btenum icrbb_field_s.btenum
+#define b_cohtrans icrbb_field_s.cohtrans
+#define b_xtsize icrbb_field_s.xtsize
+#define b_srcnode icrbb_field_s.srcnode
+#define b_srcinit icrbb_field_s.srcinit
+#define b_imsgtype icrbb_field_s.imsgtype
+#define b_imsg icrbb_field_s.imsg
+#define b_initiator icrbb_field_s.initiator
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * values for field xtsize
+ */
+#define IIO_ICRB_XTSIZE_DW 0 /* Xtalk operation size is 8 bytes */
+#define IIO_ICRB_XTSIZE_32 1 /* Xtalk operation size is 32 bytes */
+#define IIO_ICRB_XTSIZE_128 2 /* Xtalk operation size is 128 bytes */
+
+/*
+ * values for field srcinit
+ */
+#define IIO_ICRB_PROC0 0 /* Source of request is Proc 0 */
+#define IIO_ICRB_PROC1 1 /* Source of request is Proc 1 */
+#define IIO_ICRB_GB_REQ 2 /* Source is Guranteed BW request */
+#define IIO_ICRB_IO_REQ 3 /* Source is Normal IO request */
+
+/*
+ * Values for field imsgtype
+ */
+#define IIO_ICRB_IMSGT_XTALK 0 /* Incoming Meessage from Xtalk */
+#define IIO_ICRB_IMSGT_BTE 1 /* Incoming message from BTE */
+#define IIO_ICRB_IMSGT_SN0NET 2 /* Incoming message from SN0 net */
+#define IIO_ICRB_IMSGT_CRB 3 /* Incoming message from CRB ??? */
+
+/*
+ * values for field initiator.
+ */
+#define IIO_ICRB_INIT_XTALK 0 /* Message originated in xtalk */
+#define IIO_ICRB_INIT_BTE0 0x1 /* Message originated in BTE 0 */
+#define IIO_ICRB_INIT_SN0NET 0x2 /* Message originated in SN0net */
+#define IIO_ICRB_INIT_CRB 0x3 /* Message originated in CRB ? */
+#define IIO_ICRB_INIT_BTE1 0x5 /* MEssage originated in BTE 1 */
+
+/*
+ * Values for field reqtype.
+ */
+/* XXX - Need to fix this for Hub 2 */
+#define IIO_ICRB_REQ_DWRD 0 /* Request type double word */
+#define IIO_ICRB_REQ_QCLRD 1 /* Request is Qrtr Caceh line Rd */
+#define IIO_ICRB_REQ_BLKRD 2 /* Request is block read */
+#define IIO_ICRB_REQ_RSHU 6 /* Request is BTE block read */
+#define IIO_ICRB_REQ_REXU 7 /* request is BTE Excl Read */
+#define IIO_ICRB_REQ_RDEX 8 /* Request is Read Exclusive */
+#define IIO_ICRB_REQ_WINC 9 /* Request is Write Invalidate */
+#define IIO_ICRB_REQ_BWINV 10 /* Request is BTE Winv */
+#define IIO_ICRB_REQ_PIORD 11 /* Request is PIO read */
+#define IIO_ICRB_REQ_PIOWR 12 /* Request is PIO Write */
+#define IIO_ICRB_REQ_PRDM 13 /* Request is Fetch&Op */
+#define IIO_ICRB_REQ_PWRM 14 /* Request is Store &Op */
+#define IIO_ICRB_REQ_PTPWR 15 /* Request is Peer to peer */
+#define IIO_ICRB_REQ_WB 16 /* Request is Write back */
+#define IIO_ICRB_REQ_DEX 17 /* Retained DEX Cache line */
+
+/*
+ * Fields in CRB Register C
+ */
+
+#ifndef __ASSEMBLY__
+
+typedef union icrbc_s {
+ u64 reg_value;
+ struct {
+ u64 rsvd: 6,
+ sleep: 1,
+ pricnt: 4, /* Priority count sent with Read req */
+ pripsc: 4, /* Priority Pre scalar */
+ bteop: 1, /* BTE Operation */
+ push_be: 34, /* Push address Byte enable
+ * Holds push addr, if CRB is for BTE
+ * If CRB belongs to Partial cache,
+ * this contains byte enables bits
+ * ([47:46] = 0)
+ */
+ suppl: 11, /* Supplemental field */
+ barrop: 1, /* Barrier Op bit set in xtalk req */
+ doresp: 1, /* Xtalk req needs a response */
+ gbr: 1; /* GBR bit set in xtalk packet */
+ } icrbc_field_s;
+} icrbc_t;
+
+#define c_pricnt icrbc_field_s.pricnt
+#define c_pripsc icrbc_field_s.pripsc
+#define c_bteop icrbc_field_s.bteop
+#define c_bteaddr icrbc_field_s.push_be /* push_be field has 2 names */
+#define c_benable icrbc_field_s.push_be /* push_be field has 2 names */
+#define c_suppl icrbc_field_s.suppl
+#define c_barrop icrbc_field_s.barrop
+#define c_doresp icrbc_field_s.doresp
+#define c_gbr icrbc_field_s.gbr
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Fields in CRB Register D
+ */
+
+#ifndef __ASSEMBLY__
+typedef union icrbd_s {
+ u64 reg_value;
+ struct {
+ u64 rsvd: 38,
+ toutvld: 1, /* Timeout in progress for this CRB */
+ ctxtvld: 1, /* Context field below is valid */
+ rsvd2: 1,
+ context: 15, /* Bit vector:
+ * Has a bit set for each CRB entry
+ * which needs to be deallocated
+ * before this CRB entry is processed.
+ * Set only for barrier operations.
+ */
+ timeout: 8; /* Timeout Upper 8 bits */
+ } icrbd_field_s;
+} icrbd_t;
+
+#define icrbd_toutvld icrbd_field_s.toutvld
+#define icrbd_ctxtvld icrbd_field_s.ctxtvld
+#define icrbd_context icrbd_field_s.context
+
+
+typedef union hubii_ifdr_u {
+ u64 hi_ifdr_value;
+ struct {
+ u64 ifdr_rsvd: 49,
+ ifdr_maxrp: 7,
+ ifdr_rsvd1: 1,
+ ifdr_maxrq: 7;
+ } hi_ifdr_fields;
+} hubii_ifdr_t;
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Hardware designed names for the BTE control registers.
+ */
+#define IIO_IBLS_0 0x410000 /* BTE length/status 0 */
+#define IIO_IBSA_0 0x410008 /* BTE source address 0 */
+#define IIO_IBDA_0 0x410010 /* BTE destination address 0 */
+#define IIO_IBCT_0 0x410018 /* BTE control/terminate 0 */
+#define IIO_IBNA_0 0x410020 /* BTE notification address 0 */
+#define IIO_IBNR_0 IIO_IBNA_0
+#define IIO_IBIA_0 0x410028 /* BTE interrupt address 0 */
+
+#define IIO_IBLS_1 0x420000 /* BTE length/status 1 */
+#define IIO_IBSA_1 0x420008 /* BTE source address 1 */
+#define IIO_IBDA_1 0x420010 /* BTE destination address 1 */
+#define IIO_IBCT_1 0x420018 /* BTE control/terminate 1 */
+#define IIO_IBNA_1 0x420020 /* BTE notification address 1 */
+#define IIO_IBNR_1 IIO_IBNA_1
+#define IIO_IBIA_1 0x420028 /* BTE interrupt address 1 */
+
+/*
+ * More miscellaneous registers
+ */
+#define IIO_IPCR 0x430000 /* Performance Control */
+#define IIO_IPPR 0x430008 /* Performance Profiling */
+
+/*
+ * IO Error Clear register bit field definitions
+ */
+#define IECLR_BTE1 (1 << 18) /* clear bte error 1 ??? */
+#define IECLR_BTE0 (1 << 17) /* clear bte error 0 ??? */
+#define IECLR_CRAZY (1 << 16) /* clear crazy bit in wstat reg */
+#define IECLR_PRB_F (1 << 15) /* clear err bit in PRB_F reg */
+#define IECLR_PRB_E (1 << 14) /* clear err bit in PRB_E reg */
+#define IECLR_PRB_D (1 << 13) /* clear err bit in PRB_D reg */
+#define IECLR_PRB_C (1 << 12) /* clear err bit in PRB_C reg */
+#define IECLR_PRB_B (1 << 11) /* clear err bit in PRB_B reg */
+#define IECLR_PRB_A (1 << 10) /* clear err bit in PRB_A reg */
+#define IECLR_PRB_9 (1 << 9) /* clear err bit in PRB_9 reg */
+#define IECLR_PRB_8 (1 << 8) /* clear err bit in PRB_8 reg */
+#define IECLR_PRB_0 (1 << 0) /* clear err bit in PRB_0 reg */
+
+/*
+ * IO PIO Read Table Entry format
+ */
+
+#ifndef __ASSEMBLY__
+
+typedef union iprte_a {
+ u64 entry;
+ struct {
+ u64 rsvd1 : 7, /* Reserved field */
+ valid : 1, /* Maps to a timeout entry */
+ rsvd2 : 1,
+ srcnode : 9, /* Node which did this PIO */
+ initiator : 2, /* If T5A or T5B or IO */
+ rsvd3 : 3,
+ addr : 38, /* Physical address of PIO */
+ rsvd4 : 3;
+ } iprte_fields;
+} iprte_a_t;
+
+#define iprte_valid iprte_fields.valid
+#define iprte_timeout iprte_fields.timeout
+#define iprte_srcnode iprte_fields.srcnode
+#define iprte_init iprte_fields.initiator
+#define iprte_addr iprte_fields.addr
+
+#endif /* !__ASSEMBLY__ */
+
+#define IPRTE_ADDRSHFT 3
+
+/*
+ * Hub IIO PRB Register format.
+ */
+
+#ifndef __ASSEMBLY__
+/*
+ * Note: Fields bnakctr, anakctr, xtalkctrmode, ovflow fields are
+ * "Status" fields, and should only be used in case of clean up after errors.
+ */
+
+typedef union iprb_u {
+ u64 reg_value;
+ struct {
+ u64 rsvd1: 15,
+ error: 1, /* Widget rcvd wr resp pkt w/ error */
+ ovflow: 5, /* Over flow count. perf measurement */
+ fire_and_forget: 1, /* Launch Write without response */
+ mode: 2, /* Widget operation Mode */
+ rsvd2: 2,
+ bnakctr: 14,
+ rsvd3: 2,
+ anakctr: 14,
+ xtalkctr: 8;
+ } iprb_fields_s;
+} iprb_t;
+
+#define iprb_regval reg_value
+
+#define iprb_error iprb_fields_s.error
+#define iprb_ovflow iprb_fields_s.ovflow
+#define iprb_ff iprb_fields_s.fire_and_forget
+#define iprb_mode iprb_fields_s.mode
+#define iprb_bnakctr iprb_fields_s.bnakctr
+#define iprb_anakctr iprb_fields_s.anakctr
+#define iprb_xtalkctr iprb_fields_s.xtalkctr
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * values for mode field in iprb_t.
+ * For details of the meanings of NAK and Accept, refer the PIO flow
+ * document
+ */
+#define IPRB_MODE_NORMAL (0)
+#define IPRB_MODE_COLLECT_A (1) /* PRB in collect A mode */
+#define IPRB_MODE_SERVICE_A (2) /* NAK B and Accept A */
+#define IPRB_MODE_SERVICE_B (3) /* NAK A and Accept B */
+
+/*
+ * IO CRB entry C_A to E_A : Partial (cache) CRBS
+ */
+#ifndef __ASSEMBLY__
+typedef union icrbp_a {
+ u64 ip_reg; /* the entire register value */
+ struct {
+ u64 error: 1, /* 63, error occurred */
+ ln_uce: 1, /* 62: uncorrectable memory */
+ ln_ae: 1, /* 61: protection violation */
+ ln_werr:1, /* 60: write access error */
+ ln_aerr:1, /* 59: sn0net: Address error */
+ ln_perr:1, /* 58: sn0net: poison error */
+ timeout:1, /* 57: CRB timed out */
+ l_bdpkt:1, /* 56: truncated pkt on sn0net */
+ c_bdpkt:1, /* 55: truncated pkt on xtalk */
+ c_err: 1, /* 54: incoming xtalk req, err set*/
+ rsvd1: 12, /* 53-42: reserved */
+ valid: 1, /* 41: Valid status */
+ sidn: 4, /* 40-37: SIDN field of xtalk rqst */
+ tnum: 5, /* 36-32: TNUM of xtalk request */
+ bo: 1, /* 31: barrier op set in xtalk rqst*/
+ resprqd:1, /* 30: xtalk rqst requires response*/
+ gbr: 1, /* 29: gbr bit set in xtalk rqst */
+ size: 2, /* 28-27: size of xtalk request */
+ excl: 4, /* 26-23: exclusive bit(s) */
+ stall: 3, /* 22-20: stall (xtalk, bte 0/1) */
+ intvn: 1, /* 19: rqst target of intervention*/
+ resp: 1, /* 18: Data response given to t5 */
+ ack: 1, /* 17: Data ack received. */
+ hold: 1, /* 16: crb gathering invalidate acks*/
+ wb: 1, /* 15: writeback pending. */
+ ack_cnt:11, /* 14-04: counter of invalidate acks*/
+ tscaler:4; /* 03-00: Timeout prescaler */
+ } ip_fmt;
+} icrbp_a_t;
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * A couple of defines to go with the above structure.
+ */
+#define ICRBP_A_CERR_SHFT 54
+#define ICRBP_A_ERR_MASK 0x3ff
+
+#ifndef __ASSEMBLY__
+typedef union hubii_idsr {
+ u64 iin_reg;
+ struct {
+ u64 rsvd1 : 35,
+ isent : 1,
+ rsvd2 : 3,
+ ienable: 1,
+ rsvd : 7,
+ node : 9,
+ rsvd4 : 1,
+ level : 7;
+ } iin_fmt;
+} hubii_idsr_t;
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * IO BTE Length/Status (IIO_IBLS) register bit field definitions
+ */
+#define IBLS_BUSY (0x1 << 20)
+#define IBLS_ERROR_SHFT 16
+#define IBLS_ERROR (0x1 << IBLS_ERROR_SHFT)
+#define IBLS_LENGTH_MASK 0xffff
+
+/*
+ * IO BTE Control/Terminate register (IBCT) register bit field definitions
+ */
+#define IBCT_POISON (0x1 << 8)
+#define IBCT_NOTIFY (0x1 << 4)
+#define IBCT_ZFIL_MODE (0x1 << 0)
+
+/*
+ * IO BTE Interrupt Address Register (IBIA) register bit field definitions
+ */
+#define IBIA_LEVEL_SHFT 16
+#define IBIA_LEVEL_MASK (0x7f << IBIA_LEVEL_SHFT)
+#define IBIA_NODE_ID_SHFT 0
+#define IBIA_NODE_ID_MASK (0x1ff)
+
+/*
+ * Miscellaneous hub constants
+ */
+
+/* Number of widgets supported by hub */
+#define HUB_NUM_WIDGET 9
+#define HUB_WIDGET_ID_MIN 0x8
+#define HUB_WIDGET_ID_MAX 0xf
+
+#define HUB_WIDGET_PART_NUM 0xc101
+#define MAX_HUBS_PER_XBOW 2
+
+/*
+ * Get a hub's widget id from widget control register
+ */
+#define IIO_WCR_WID_GET(nasid) (REMOTE_HUB_L(nasid, III_WCR) & 0xf)
+#define IIO_WST_ERROR_MASK (UINT64_CAST 1 << 32) /* Widget status error */
+
+/*
+ * Number of credits Hub widget has while sending req/response to
+ * xbow.
+ * Value of 3 is required by Xbow 1.1
+ * We may be able to increase this to 4 with Xbow 1.2.
+ */
+#define HUBII_XBOW_CREDIT 3
+#define HUBII_XBOW_REV2_CREDIT 4
+
+#endif /* _ASM_SGI_SN_SN0_HUBIO_H */
diff --git a/arch/mips/include/asm/sn/sn0/hubmd.h b/arch/mips/include/asm/sn/sn0/hubmd.h
new file mode 100644
index 00000000000..14c225d8066
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/hubmd.h
@@ -0,0 +1,789 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/hubmd.h>, revision 1.59.
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_SN_SN0_HUBMD_H
+#define _ASM_SN_SN0_HUBMD_H
+
+
+/*
+ * Hub Memory/Directory interface registers
+ */
+#define CACHE_SLINE_SIZE 128 /* Secondary cache line size on SN0 */
+
+#define MAX_REGIONS 64
+
+/* Hardware page size and shift */
+
+#define MD_PAGE_SIZE 4096 /* Page size in bytes */
+#define MD_PAGE_NUM_SHFT 12 /* Address to page number shift */
+
+/* Register offsets from LOCAL_HUB or REMOTE_HUB */
+
+#define MD_BASE 0x200000
+#define MD_BASE_PERF 0x210000
+#define MD_BASE_JUNK 0x220000
+
+#define MD_IO_PROTECT 0x200000 /* MD and core register protection */
+#define MD_IO_PROT_OVRRD 0x200008 /* Clear my bit in MD_IO_PROTECT */
+#define MD_HSPEC_PROTECT 0x200010 /* BDDIR, LBOOT, RBOOT protection */
+#define MD_MEMORY_CONFIG 0x200018 /* Memory/Directory DIMM control */
+#define MD_REFRESH_CONTROL 0x200020 /* Memory/Directory refresh ctrl */
+#define MD_FANDOP_CAC_STAT 0x200028 /* Fetch-and-op cache status */
+#define MD_MIG_DIFF_THRESH 0x200030 /* Page migr. count diff thresh. */
+#define MD_MIG_VALUE_THRESH 0x200038 /* Page migr. count abs. thresh. */
+#define MD_MIG_CANDIDATE 0x200040 /* Latest page migration candidate */
+#define MD_MIG_CANDIDATE_CLR 0x200048 /* Clear page migration candidate */
+#define MD_DIR_ERROR 0x200050 /* Directory DIMM error */
+#define MD_DIR_ERROR_CLR 0x200058 /* Directory DIMM error clear */
+#define MD_PROTOCOL_ERROR 0x200060 /* Directory protocol error */
+#define MD_PROTOCOL_ERROR_CLR 0x200068 /* Directory protocol error clear */
+#define MD_MEM_ERROR 0x200070 /* Memory DIMM error */
+#define MD_MEM_ERROR_CLR 0x200078 /* Memory DIMM error clear */
+#define MD_MISC_ERROR 0x200080 /* Miscellaneous MD error */
+#define MD_MISC_ERROR_CLR 0x200088 /* Miscellaneous MD error clear */
+#define MD_MEM_DIMM_INIT 0x200090 /* Memory DIMM mode initization. */
+#define MD_DIR_DIMM_INIT 0x200098 /* Directory DIMM mode init. */
+#define MD_MOQ_SIZE 0x2000a0 /* MD outgoing queue size */
+#define MD_MLAN_CTL 0x2000a8 /* NIC (Microlan) control register */
+
+#define MD_PERF_SEL 0x210000 /* Select perf monitor events */
+#define MD_PERF_CNT0 0x210010 /* Performance counter 0 */
+#define MD_PERF_CNT1 0x210018 /* Performance counter 1 */
+#define MD_PERF_CNT2 0x210020 /* Performance counter 2 */
+#define MD_PERF_CNT3 0x210028 /* Performance counter 3 */
+#define MD_PERF_CNT4 0x210030 /* Performance counter 4 */
+#define MD_PERF_CNT5 0x210038 /* Performance counter 5 */
+
+#define MD_UREG0_0 0x220000 /* uController/UART 0 register */
+#define MD_UREG0_1 0x220008 /* uController/UART 0 register */
+#define MD_UREG0_2 0x220010 /* uController/UART 0 register */
+#define MD_UREG0_3 0x220018 /* uController/UART 0 register */
+#define MD_UREG0_4 0x220020 /* uController/UART 0 register */
+#define MD_UREG0_5 0x220028 /* uController/UART 0 register */
+#define MD_UREG0_6 0x220030 /* uController/UART 0 register */
+#define MD_UREG0_7 0x220038 /* uController/UART 0 register */
+
+#define MD_SLOTID_USTAT 0x220048 /* Hub slot ID & UART/uCtlr status */
+#define MD_LED0 0x220050 /* Eight-bit LED for CPU A */
+#define MD_LED1 0x220058 /* Eight-bit LED for CPU B */
+
+#define MD_UREG1_0 0x220080 /* uController/UART 1 register */
+#define MD_UREG1_1 0x220088 /* uController/UART 1 register */
+#define MD_UREG1_2 0x220090 /* uController/UART 1 register */
+#define MD_UREG1_3 0x220098 /* uController/UART 1 register */
+#define MD_UREG1_4 0x2200a0 /* uController/UART 1 register */
+#define MD_UREG1_5 0x2200a8 /* uController/UART 1 register */
+#define MD_UREG1_6 0x2200b0 /* uController/UART 1 register */
+#define MD_UREG1_7 0x2200b8 /* uController/UART 1 register */
+#define MD_UREG1_8 0x2200c0 /* uController/UART 1 register */
+#define MD_UREG1_9 0x2200c8 /* uController/UART 1 register */
+#define MD_UREG1_10 0x2200d0 /* uController/UART 1 register */
+#define MD_UREG1_11 0x2200d8 /* uController/UART 1 register */
+#define MD_UREG1_12 0x2200e0 /* uController/UART 1 register */
+#define MD_UREG1_13 0x2200e8 /* uController/UART 1 register */
+#define MD_UREG1_14 0x2200f0 /* uController/UART 1 register */
+#define MD_UREG1_15 0x2200f8 /* uController/UART 1 register */
+
+#ifdef CONFIG_SGI_SN_N_MODE
+#define MD_MEM_BANKS 4 /* 4 banks of memory max in N mode */
+#else
+#define MD_MEM_BANKS 8 /* 8 banks of memory max in M mode */
+#endif
+
+/*
+ * MD_MEMORY_CONFIG fields
+ *
+ * MD_SIZE_xxx are useful for representing the size of a SIMM or bank
+ * (SIMM pair). They correspond to the values needed for the bit
+ * triplets (MMC_BANK_MASK) in the MD_MEMORY_CONFIG register for bank size.
+ * Bits not used by the MD are used by software.
+ */
+
+#define MD_SIZE_EMPTY 0 /* Valid in MEMORY_CONFIG */
+#define MD_SIZE_8MB 1
+#define MD_SIZE_16MB 2
+#define MD_SIZE_32MB 3 /* Broken in Hub 1 */
+#define MD_SIZE_64MB 4 /* Valid in MEMORY_CONFIG */
+#define MD_SIZE_128MB 5 /* Valid in MEMORY_CONFIG */
+#define MD_SIZE_256MB 6
+#define MD_SIZE_512MB 7 /* Valid in MEMORY_CONFIG */
+#define MD_SIZE_1GB 8
+#define MD_SIZE_2GB 9
+#define MD_SIZE_4GB 10
+
+#define MD_SIZE_BYTES(size) ((size) == 0 ? 0 : 0x400000L << (size))
+#define MD_SIZE_MBYTES(size) ((size) == 0 ? 0 : 4 << (size))
+
+#define MMC_FPROM_CYC_SHFT 49 /* Have to use UINT64_CAST, instead */
+#define MMC_FPROM_CYC_MASK (UINT64_CAST 31 << 49) /* of 'L' suffix, */
+#define MMC_FPROM_WR_SHFT 44 /* for assembler */
+#define MMC_FPROM_WR_MASK (UINT64_CAST 31 << 44)
+#define MMC_UCTLR_CYC_SHFT 39
+#define MMC_UCTLR_CYC_MASK (UINT64_CAST 31 << 39)
+#define MMC_UCTLR_WR_SHFT 34
+#define MMC_UCTLR_WR_MASK (UINT64_CAST 31 << 34)
+#define MMC_DIMM0_SEL_SHFT 32
+#define MMC_DIMM0_SEL_MASK (UINT64_CAST 3 << 32)
+#define MMC_IO_PROT_EN_SHFT 31
+#define MMC_IO_PROT_EN_MASK (UINT64_CAST 1 << 31)
+#define MMC_IO_PROT (UINT64_CAST 1 << 31)
+#define MMC_ARB_MLSS_SHFT 30
+#define MMC_ARB_MLSS_MASK (UINT64_CAST 1 << 30)
+#define MMC_ARB_MLSS (UINT64_CAST 1 << 30)
+#define MMC_IGNORE_ECC_SHFT 29
+#define MMC_IGNORE_ECC_MASK (UINT64_CAST 1 << 29)
+#define MMC_IGNORE_ECC (UINT64_CAST 1 << 29)
+#define MMC_DIR_PREMIUM_SHFT 28
+#define MMC_DIR_PREMIUM_MASK (UINT64_CAST 1 << 28)
+#define MMC_DIR_PREMIUM (UINT64_CAST 1 << 28)
+#define MMC_REPLY_GUAR_SHFT 24
+#define MMC_REPLY_GUAR_MASK (UINT64_CAST 15 << 24)
+#define MMC_BANK_SHFT(_b) ((_b) * 3)
+#define MMC_BANK_MASK(_b) (UINT64_CAST 7 << MMC_BANK_SHFT(_b))
+#define MMC_BANK_ALL_MASK 0xffffff
+#define MMC_RESET_DEFAULTS (UINT64_CAST 0x0f << MMC_FPROM_CYC_SHFT | \
+ UINT64_CAST 0x07 << MMC_FPROM_WR_SHFT | \
+ UINT64_CAST 0x1f << MMC_UCTLR_CYC_SHFT | \
+ UINT64_CAST 0x0f << MMC_UCTLR_WR_SHFT | \
+ MMC_IGNORE_ECC | MMC_DIR_PREMIUM | \
+ UINT64_CAST 0x0f << MMC_REPLY_GUAR_SHFT | \
+ MMC_BANK_ALL_MASK)
+
+/* MD_REFRESH_CONTROL fields */
+
+#define MRC_ENABLE_SHFT 63
+#define MRC_ENABLE_MASK (UINT64_CAST 1 << 63)
+#define MRC_ENABLE (UINT64_CAST 1 << 63)
+#define MRC_COUNTER_SHFT 12
+#define MRC_COUNTER_MASK (UINT64_CAST 0xfff << 12)
+#define MRC_CNT_THRESH_MASK 0xfff
+#define MRC_RESET_DEFAULTS (UINT64_CAST 0x400)
+
+/* MD_MEM_DIMM_INIT and MD_DIR_DIMM_INIT fields */
+
+#define MDI_SELECT_SHFT 32
+#define MDI_SELECT_MASK (UINT64_CAST 0x0f << 32)
+#define MDI_DIMM_MODE_MASK (UINT64_CAST 0xfff)
+
+/* MD_MOQ_SIZE fields */
+
+#define MMS_RP_SIZE_SHFT 8
+#define MMS_RP_SIZE_MASK (UINT64_CAST 0x3f << 8)
+#define MMS_RQ_SIZE_SHFT 0
+#define MMS_RQ_SIZE_MASK (UINT64_CAST 0x1f)
+#define MMS_RESET_DEFAULTS (0x32 << 8 | 0x12)
+
+/* MD_FANDOP_CAC_STAT fields */
+
+#define MFC_VALID_SHFT 63
+#define MFC_VALID_MASK (UINT64_CAST 1 << 63)
+#define MFC_VALID (UINT64_CAST 1 << 63)
+#define MFC_ADDR_SHFT 6
+#define MFC_ADDR_MASK (UINT64_CAST 0x3ffffff)
+
+/* MD_MLAN_CTL fields */
+
+#define MLAN_PHI1_SHFT 27
+#define MLAN_PHI1_MASK (UINT64_CAST 0x7f << 27)
+#define MLAN_PHI0_SHFT 20
+#define MLAN_PHI0_MASK (UINT64_CAST 0x7f << 27)
+#define MLAN_PULSE_SHFT 10
+#define MLAN_PULSE_MASK (UINT64_CAST 0x3ff << 10)
+#define MLAN_SAMPLE_SHFT 2
+#define MLAN_SAMPLE_MASK (UINT64_CAST 0xff << 2)
+#define MLAN_DONE_SHFT 1
+#define MLAN_DONE_MASK 2
+#define MLAN_DONE (UINT64_CAST 0x02)
+#define MLAN_RD_DATA (UINT64_CAST 0x01)
+#define MLAN_RESET_DEFAULTS (UINT64_CAST 0x31 << MLAN_PHI1_SHFT | \
+ UINT64_CAST 0x31 << MLAN_PHI0_SHFT)
+
+/* MD_SLOTID_USTAT bit definitions */
+
+#define MSU_CORECLK_TST_SHFT 7 /* You don't wanna know */
+#define MSU_CORECLK_TST_MASK (UINT64_CAST 1 << 7)
+#define MSU_CORECLK_TST (UINT64_CAST 1 << 7)
+#define MSU_CORECLK_SHFT 6 /* You don't wanna know */
+#define MSU_CORECLK_MASK (UINT64_CAST 1 << 6)
+#define MSU_CORECLK (UINT64_CAST 1 << 6)
+#define MSU_NETSYNC_SHFT 5 /* You don't wanna know */
+#define MSU_NETSYNC_MASK (UINT64_CAST 1 << 5)
+#define MSU_NETSYNC (UINT64_CAST 1 << 5)
+#define MSU_FPROMRDY_SHFT 4 /* Flash PROM ready bit */
+#define MSU_FPROMRDY_MASK (UINT64_CAST 1 << 4)
+#define MSU_FPROMRDY (UINT64_CAST 1 << 4)
+#define MSU_I2CINTR_SHFT 3 /* I2C interrupt bit */
+#define MSU_I2CINTR_MASK (UINT64_CAST 1 << 3)
+#define MSU_I2CINTR (UINT64_CAST 1 << 3)
+#define MSU_SLOTID_MASK 0xff
+#define MSU_SN0_SLOTID_SHFT 0 /* Slot ID */
+#define MSU_SN0_SLOTID_MASK (UINT64_CAST 7)
+#define MSU_SN00_SLOTID_SHFT 7
+#define MSU_SN00_SLOTID_MASK (UINT64_CAST 0x80)
+
+#define MSU_PIMM_PSC_SHFT 4
+#define MSU_PIMM_PSC_MASK (0xf << MSU_PIMM_PSC_SHFT)
+
+/* MD_MIG_DIFF_THRESH bit definitions */
+
+#define MD_MIG_DIFF_THRES_VALID_MASK (UINT64_CAST 0x1 << 63)
+#define MD_MIG_DIFF_THRES_VALID_SHFT 63
+#define MD_MIG_DIFF_THRES_VALUE_MASK (UINT64_CAST 0xfffff)
+
+/* MD_MIG_VALUE_THRESH bit definitions */
+
+#define MD_MIG_VALUE_THRES_VALID_MASK (UINT64_CAST 0x1 << 63)
+#define MD_MIG_VALUE_THRES_VALID_SHFT 63
+#define MD_MIG_VALUE_THRES_VALUE_MASK (UINT64_CAST 0xfffff)
+
+/* MD_MIG_CANDIDATE bit definitions */
+
+#define MD_MIG_CANDIDATE_VALID_MASK (UINT64_CAST 0x1 << 63)
+#define MD_MIG_CANDIDATE_VALID_SHFT 63
+#define MD_MIG_CANDIDATE_TYPE_MASK (UINT64_CAST 0x1 << 30)
+#define MD_MIG_CANDIDATE_TYPE_SHFT 30
+#define MD_MIG_CANDIDATE_OVERRUN_MASK (UINT64_CAST 0x1 << 29)
+#define MD_MIG_CANDIDATE_OVERRUN_SHFT 29
+#define MD_MIG_CANDIDATE_INITIATOR_MASK (UINT64_CAST 0x7ff << 18)
+#define MD_MIG_CANDIDATE_INITIATOR_SHFT 18
+#define MD_MIG_CANDIDATE_NODEID_MASK (UINT64_CAST 0x1ff << 20)
+#define MD_MIG_CANDIDATE_NODEID_SHFT 20
+#define MD_MIG_CANDIDATE_ADDR_MASK (UINT64_CAST 0x3ffff)
+#define MD_MIG_CANDIDATE_ADDR_SHFT 14 /* The address starts at bit 14 */
+
+/* Other MD definitions */
+
+#define MD_BANK_SHFT 29 /* log2(512 MB) */
+#define MD_BANK_MASK (UINT64_CAST 7 << 29)
+#define MD_BANK_SIZE (UINT64_CAST 1 << MD_BANK_SHFT) /* 512 MB */
+#define MD_BANK_OFFSET(_b) (UINT64_CAST (_b) << MD_BANK_SHFT)
+
+/*
+ * The following definitions cover the bit field definitions for the
+ * various MD registers. For multi-bit registers, we define both
+ * a shift amount and a mask value. By convention, if you want to
+ * isolate a field, you should mask the field and then shift it down,
+ * since this makes the masks useful without a shift.
+ */
+
+/* Directory entry states for both premium and standard SIMMs. */
+
+#define MD_DIR_SHARED (UINT64_CAST 0x0) /* 000 */
+#define MD_DIR_POISONED (UINT64_CAST 0x1) /* 001 */
+#define MD_DIR_EXCLUSIVE (UINT64_CAST 0x2) /* 010 */
+#define MD_DIR_BUSY_SHARED (UINT64_CAST 0x3) /* 011 */
+#define MD_DIR_BUSY_EXCL (UINT64_CAST 0x4) /* 100 */
+#define MD_DIR_WAIT (UINT64_CAST 0x5) /* 101 */
+#define MD_DIR_UNOWNED (UINT64_CAST 0x7) /* 111 */
+
+/*
+ * The MD_DIR_FORCE_ECC bit can be added directory entry write data
+ * to forcing the ECC to be written as-is instead of recalculated.
+ */
+
+#define MD_DIR_FORCE_ECC (UINT64_CAST 1 << 63)
+
+/*
+ * Premium SIMM directory entry shifts and masks. Each is valid only in the
+ * context(s) indicated, where A, B, and C indicate the directory entry format
+ * as shown, and low and/or high indicates which double-word of the entry.
+ *
+ * Format A: STATE = shared, FINE = 1
+ * Format B: STATE = shared, FINE = 0
+ * Format C: STATE != shared (FINE must be 0)
+ */
+
+#define MD_PDIR_MASK 0xffffffffffff /* Whole entry */
+#define MD_PDIR_ECC_SHFT 0 /* ABC low or high */
+#define MD_PDIR_ECC_MASK 0x7f
+#define MD_PDIR_PRIO_SHFT 8 /* ABC low */
+#define MD_PDIR_PRIO_MASK (0xf << 8)
+#define MD_PDIR_AX_SHFT 7 /* ABC low */
+#define MD_PDIR_AX_MASK (1 << 7)
+#define MD_PDIR_AX (1 << 7)
+#define MD_PDIR_FINE_SHFT 12 /* ABC low */
+#define MD_PDIR_FINE_MASK (1 << 12)
+#define MD_PDIR_FINE (1 << 12)
+#define MD_PDIR_OCT_SHFT 13 /* A low */
+#define MD_PDIR_OCT_MASK (7 << 13)
+#define MD_PDIR_STATE_SHFT 13 /* BC low */
+#define MD_PDIR_STATE_MASK (7 << 13)
+#define MD_PDIR_ONECNT_SHFT 16 /* BC low */
+#define MD_PDIR_ONECNT_MASK (0x3f << 16)
+#define MD_PDIR_PTR_SHFT 22 /* C low */
+#define MD_PDIR_PTR_MASK (UINT64_CAST 0x7ff << 22)
+#define MD_PDIR_VECMSB_SHFT 22 /* AB low */
+#define MD_PDIR_VECMSB_BITMASK 0x3ffffff
+#define MD_PDIR_VECMSB_BITSHFT 27
+#define MD_PDIR_VECMSB_MASK (UINT64_CAST MD_PDIR_VECMSB_BITMASK << 22)
+#define MD_PDIR_CWOFF_SHFT 7 /* C high */
+#define MD_PDIR_CWOFF_MASK (7 << 7)
+#define MD_PDIR_VECLSB_SHFT 10 /* AB high */
+#define MD_PDIR_VECLSB_BITMASK (UINT64_CAST 0x3fffffffff)
+#define MD_PDIR_VECLSB_BITSHFT 0
+#define MD_PDIR_VECLSB_MASK (MD_PDIR_VECLSB_BITMASK << 10)
+
+/*
+ * Directory initialization values
+ */
+
+#define MD_PDIR_INIT_LO (MD_DIR_UNOWNED << MD_PDIR_STATE_SHFT | \
+ MD_PDIR_AX)
+#define MD_PDIR_INIT_HI 0
+#define MD_PDIR_INIT_PROT (MD_PROT_RW << MD_PPROT_IO_SHFT | \
+ MD_PROT_RW << MD_PPROT_SHFT)
+
+/*
+ * Standard SIMM directory entry shifts and masks. Each is valid only in the
+ * context(s) indicated, where A and C indicate the directory entry format
+ * as shown, and low and/or high indicates which double-word of the entry.
+ *
+ * Format A: STATE == shared
+ * Format C: STATE != shared
+ */
+
+#define MD_SDIR_MASK 0xffff /* Whole entry */
+#define MD_SDIR_ECC_SHFT 0 /* AC low or high */
+#define MD_SDIR_ECC_MASK 0x1f
+#define MD_SDIR_PRIO_SHFT 6 /* AC low */
+#define MD_SDIR_PRIO_MASK (1 << 6)
+#define MD_SDIR_AX_SHFT 5 /* AC low */
+#define MD_SDIR_AX_MASK (1 << 5)
+#define MD_SDIR_AX (1 << 5)
+#define MD_SDIR_STATE_SHFT 7 /* AC low */
+#define MD_SDIR_STATE_MASK (7 << 7)
+#define MD_SDIR_PTR_SHFT 10 /* C low */
+#define MD_SDIR_PTR_MASK (0x3f << 10)
+#define MD_SDIR_CWOFF_SHFT 5 /* C high */
+#define MD_SDIR_CWOFF_MASK (7 << 5)
+#define MD_SDIR_VECMSB_SHFT 11 /* A low */
+#define MD_SDIR_VECMSB_BITMASK 0x1f
+#define MD_SDIR_VECMSB_BITSHFT 7
+#define MD_SDIR_VECMSB_MASK (MD_SDIR_VECMSB_BITMASK << 11)
+#define MD_SDIR_VECLSB_SHFT 5 /* A high */
+#define MD_SDIR_VECLSB_BITMASK 0x7ff
+#define MD_SDIR_VECLSB_BITSHFT 0
+#define MD_SDIR_VECLSB_MASK (MD_SDIR_VECLSB_BITMASK << 5)
+
+/*
+ * Directory initialization values
+ */
+
+#define MD_SDIR_INIT_LO (MD_DIR_UNOWNED << MD_SDIR_STATE_SHFT | \
+ MD_SDIR_AX)
+#define MD_SDIR_INIT_HI 0
+#define MD_SDIR_INIT_PROT (MD_PROT_RW << MD_SPROT_SHFT)
+
+/* Protection and migration field values */
+
+#define MD_PROT_RW (UINT64_CAST 0x6)
+#define MD_PROT_RO (UINT64_CAST 0x3)
+#define MD_PROT_NO (UINT64_CAST 0x0)
+#define MD_PROT_BAD (UINT64_CAST 0x5)
+
+/* Premium SIMM protection entry shifts and masks. */
+
+#define MD_PPROT_SHFT 0 /* Prot. field */
+#define MD_PPROT_MASK 7
+#define MD_PPROT_MIGMD_SHFT 3 /* Migration mode */
+#define MD_PPROT_MIGMD_MASK (3 << 3)
+#define MD_PPROT_REFCNT_SHFT 5 /* Reference count */
+#define MD_PPROT_REFCNT_WIDTH 0x7ffff
+#define MD_PPROT_REFCNT_MASK (MD_PPROT_REFCNT_WIDTH << 5)
+
+#define MD_PPROT_IO_SHFT 45 /* I/O Prot field */
+#define MD_PPROT_IO_MASK (UINT64_CAST 7 << 45)
+
+/* Standard SIMM protection entry shifts and masks. */
+
+#define MD_SPROT_SHFT 0 /* Prot. field */
+#define MD_SPROT_MASK 7
+#define MD_SPROT_MIGMD_SHFT 3 /* Migration mode */
+#define MD_SPROT_MIGMD_MASK (3 << 3)
+#define MD_SPROT_REFCNT_SHFT 5 /* Reference count */
+#define MD_SPROT_REFCNT_WIDTH 0x7ff
+#define MD_SPROT_REFCNT_MASK (MD_SPROT_REFCNT_WIDTH << 5)
+
+/* Migration modes used in protection entries */
+
+#define MD_PROT_MIGMD_IREL (UINT64_CAST 0x3 << 3)
+#define MD_PROT_MIGMD_IABS (UINT64_CAST 0x2 << 3)
+#define MD_PROT_MIGMD_PREL (UINT64_CAST 0x1 << 3)
+#define MD_PROT_MIGMD_OFF (UINT64_CAST 0x0 << 3)
+
+
+/*
+ * Operations on page migration threshold register
+ */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * LED register macros
+ */
+
+#define CPU_LED_ADDR(_nasid, _slice) \
+ (private.p_sn00 ? \
+ REMOTE_HUB_ADDR((_nasid), MD_UREG1_0 + ((_slice) << 5)) : \
+ REMOTE_HUB_ADDR((_nasid), MD_LED0 + ((_slice) << 3)))
+
+#define SET_CPU_LEDS(_nasid, _slice, _val) \
+ (HUB_S(CPU_LED_ADDR(_nasid, _slice), (_val)))
+
+#define SET_MY_LEDS(_v) \
+ SET_CPU_LEDS(get_nasid(), get_slice(), (_v))
+
+/*
+ * Operations on Memory/Directory DIMM control register
+ */
+
+#define DIRTYPE_PREMIUM 1
+#define DIRTYPE_STANDARD 0
+#define MD_MEMORY_CONFIG_DIR_TYPE_GET(region) (\
+ (REMOTE_HUB_L(region, MD_MEMORY_CONFIG) & MMC_DIR_PREMIUM_MASK) >> \
+ MMC_DIR_PREMIUM_SHFT)
+
+
+/*
+ * Operations on page migration count difference and absolute threshold
+ * registers
+ */
+
+#define MD_MIG_DIFF_THRESH_GET(region) ( \
+ REMOTE_HUB_L((region), MD_MIG_DIFF_THRESH) & \
+ MD_MIG_DIFF_THRES_VALUE_MASK)
+
+#define MD_MIG_DIFF_THRESH_SET(region, value) ( \
+ REMOTE_HUB_S((region), MD_MIG_DIFF_THRESH, \
+ MD_MIG_DIFF_THRES_VALID_MASK | (value)))
+
+#define MD_MIG_DIFF_THRESH_DISABLE(region) ( \
+ REMOTE_HUB_S((region), MD_MIG_DIFF_THRESH, \
+ REMOTE_HUB_L((region), MD_MIG_DIFF_THRESH) \
+ & ~MD_MIG_DIFF_THRES_VALID_MASK))
+
+#define MD_MIG_DIFF_THRESH_ENABLE(region) ( \
+ REMOTE_HUB_S((region), MD_MIG_DIFF_THRESH, \
+ REMOTE_HUB_L((region), MD_MIG_DIFF_THRESH) \
+ | MD_MIG_DIFF_THRES_VALID_MASK))
+
+#define MD_MIG_DIFF_THRESH_IS_ENABLED(region) ( \
+ REMOTE_HUB_L((region), MD_MIG_DIFF_THRESH) & \
+ MD_MIG_DIFF_THRES_VALID_MASK)
+
+#define MD_MIG_VALUE_THRESH_GET(region) ( \
+ REMOTE_HUB_L((region), MD_MIG_VALUE_THRESH) & \
+ MD_MIG_VALUE_THRES_VALUE_MASK)
+
+#define MD_MIG_VALUE_THRESH_SET(region, value) ( \
+ REMOTE_HUB_S((region), MD_MIG_VALUE_THRESH, \
+ MD_MIG_VALUE_THRES_VALID_MASK | (value)))
+
+#define MD_MIG_VALUE_THRESH_DISABLE(region) ( \
+ REMOTE_HUB_S((region), MD_MIG_VALUE_THRESH, \
+ REMOTE_HUB_L(region, MD_MIG_VALUE_THRESH) \
+ & ~MD_MIG_VALUE_THRES_VALID_MASK))
+
+#define MD_MIG_VALUE_THRESH_ENABLE(region) ( \
+ REMOTE_HUB_S((region), MD_MIG_VALUE_THRESH, \
+ REMOTE_HUB_L((region), MD_MIG_VALUE_THRESH) \
+ | MD_MIG_VALUE_THRES_VALID_MASK))
+
+#define MD_MIG_VALUE_THRESH_IS_ENABLED(region) ( \
+ REMOTE_HUB_L((region), MD_MIG_VALUE_THRESH) & \
+ MD_MIG_VALUE_THRES_VALID_MASK)
+
+/*
+ * Operations on page migration candidate register
+ */
+
+#define MD_MIG_CANDIDATE_GET(my_region_id) ( \
+ REMOTE_HUB_L((my_region_id), MD_MIG_CANDIDATE_CLR))
+
+#define MD_MIG_CANDIDATE_HWPFN(value) ((value) & MD_MIG_CANDIDATE_ADDR_MASK)
+
+#define MD_MIG_CANDIDATE_NODEID(value) ( \
+ ((value) & MD_MIG_CANDIDATE_NODEID_MASK) >> MD_MIG_CANDIDATE_NODEID_SHFT)
+
+#define MD_MIG_CANDIDATE_TYPE(value) ( \
+ ((value) & MD_MIG_CANDIDATE_TYPE_MASK) >> MD_MIG_CANDIDATE_TYPE_SHFT)
+
+#define MD_MIG_CANDIDATE_VALID(value) ( \
+ ((value) & MD_MIG_CANDIDATE_VALID_MASK) >> MD_MIG_CANDIDATE_VALID_SHFT)
+
+/*
+ * Macros to retrieve fields in the protection entry
+ */
+
+/* for Premium SIMM */
+#define MD_PPROT_REFCNT_GET(value) ( \
+ ((value) & MD_PPROT_REFCNT_MASK) >> MD_PPROT_REFCNT_SHFT)
+
+#define MD_PPROT_MIGMD_GET(value) ( \
+ ((value) & MD_PPROT_MIGMD_MASK) >> MD_PPROT_MIGMD_SHFT)
+
+/* for Standard SIMM */
+#define MD_SPROT_REFCNT_GET(value) ( \
+ ((value) & MD_SPROT_REFCNT_MASK) >> MD_SPROT_REFCNT_SHFT)
+
+#define MD_SPROT_MIGMD_GET(value) ( \
+ ((value) & MD_SPROT_MIGMD_MASK) >> MD_SPROT_MIGMD_SHFT)
+
+/*
+ * Format of dir_error, mem_error, protocol_error and misc_error registers
+ */
+
+struct dir_error_reg {
+ u64 uce_vld: 1, /* 63: valid directory uce */
+ ae_vld: 1, /* 62: valid dir prot ecc error */
+ ce_vld: 1, /* 61: valid correctable ECC err*/
+ rsvd1: 19, /* 60-42: reserved */
+ bad_prot: 3, /* 41-39: encoding, bad access rights*/
+ bad_syn: 7, /* 38-32: bad dir syndrome */
+ rsvd2: 2, /* 31-30: reserved */
+ hspec_addr:27, /* 29-03: bddir space bad entry */
+ uce_ovr: 1, /* 2: multiple dir uce's */
+ ae_ovr: 1, /* 1: multiple prot ecc errs*/
+ ce_ovr: 1; /* 0: multiple correctable errs */
+};
+
+typedef union md_dir_error {
+ u64 derr_reg; /* the entire register */
+ struct dir_error_reg derr_fmt; /* the register format */
+} md_dir_error_t;
+
+
+struct mem_error_reg {
+ u64 uce_vld: 1, /* 63: valid memory uce */
+ ce_vld: 1, /* 62: valid correctable ECC err*/
+ rsvd1: 22, /* 61-40: reserved */
+ bad_syn: 8, /* 39-32: bad mem ecc syndrome */
+ address: 29, /* 31-03: bad entry pointer */
+ rsvd2: 1, /* 2: reserved */
+ uce_ovr: 1, /* 1: multiple mem uce's */
+ ce_ovr: 1; /* 0: multiple correctable errs */
+};
+
+
+typedef union md_mem_error {
+ u64 merr_reg; /* the entire register */
+ struct mem_error_reg merr_fmt; /* format of the mem_error reg */
+} md_mem_error_t;
+
+
+struct proto_error_reg {
+ u64 valid: 1, /* 63: valid protocol error */
+ rsvd1: 2, /* 62-61: reserved */
+ initiator:11, /* 60-50: id of request initiator*/
+ backoff: 2, /* 49-48: backoff control */
+ msg_type: 8, /* 47-40: type of request */
+ access: 2, /* 39-38: access rights of initiator*/
+ priority: 1, /* 37: priority level of requestor*/
+ dir_state: 4, /* 36-33: state of directory */
+ pointer_me:1, /* 32: initiator same as dir ptr */
+ address: 29, /* 31-03: request address */
+ rsvd2: 2, /* 02-01: reserved */
+ overrun: 1; /* 0: multiple protocol errs */
+};
+
+typedef union md_proto_error {
+ u64 perr_reg; /* the entire register */
+ struct proto_error_reg perr_fmt; /* format of the register */
+} md_proto_error_t;
+
+
+struct md_sdir_high_fmt {
+ unsigned short sd_hi_bvec : 11,
+ sd_hi_ecc : 5;
+};
+
+
+typedef union md_sdir_high {
+ /* The 16 bits of standard directory, upper word */
+ unsigned short sd_hi_val;
+ struct md_sdir_high_fmt sd_hi_fmt;
+}md_sdir_high_t;
+
+
+struct md_sdir_low_shared_fmt {
+ /* The meaning of lower directory, shared */
+ unsigned short sds_lo_bvec : 5,
+ sds_lo_unused: 1,
+ sds_lo_state : 3,
+ sds_lo_prio : 1,
+ sds_lo_ax : 1,
+ sds_lo_ecc : 5;
+};
+
+struct md_sdir_low_exclusive_fmt {
+ /* The meaning of lower directory, exclusive */
+ unsigned short sde_lo_ptr : 6,
+ sde_lo_state : 3,
+ sde_lo_prio : 1,
+ sde_lo_ax : 1,
+ sde_lo_ecc : 5;
+};
+
+
+typedef union md_sdir_low {
+ /* The 16 bits of standard directory, lower word */
+ unsigned short sd_lo_val;
+ struct md_sdir_low_exclusive_fmt sde_lo_fmt;
+ struct md_sdir_low_shared_fmt sds_lo_fmt;
+}md_sdir_low_t;
+
+
+
+struct md_pdir_high_fmt {
+ u64 pd_hi_unused : 16,
+ pd_hi_bvec : 38,
+ pd_hi_unused1 : 3,
+ pd_hi_ecc : 7;
+};
+
+
+typedef union md_pdir_high {
+ /* The 48 bits of standard directory, upper word */
+ u64 pd_hi_val;
+ struct md_pdir_high_fmt pd_hi_fmt;
+}md_pdir_high_t;
+
+
+struct md_pdir_low_shared_fmt {
+ /* The meaning of lower directory, shared */
+ u64 pds_lo_unused : 16,
+ pds_lo_bvec : 26,
+ pds_lo_cnt : 6,
+ pds_lo_state : 3,
+ pds_lo_ste : 1,
+ pds_lo_prio : 4,
+ pds_lo_ax : 1,
+ pds_lo_ecc : 7;
+};
+
+struct md_pdir_low_exclusive_fmt {
+ /* The meaning of lower directory, exclusive */
+ u64 pde_lo_unused : 31,
+ pde_lo_ptr : 11,
+ pde_lo_unused1 : 6,
+ pde_lo_state : 3,
+ pde_lo_ste : 1,
+ pde_lo_prio : 4,
+ pde_lo_ax : 1,
+ pde_lo_ecc : 7;
+};
+
+
+typedef union md_pdir_loent {
+ /* The 48 bits of premium directory, lower word */
+ u64 pd_lo_val;
+ struct md_pdir_low_exclusive_fmt pde_lo_fmt;
+ struct md_pdir_low_shared_fmt pds_lo_fmt;
+}md_pdir_low_t;
+
+
+/*
+ * the following two "union" definitions and two
+ * "struct" definitions are used in vmdump.c to
+ * represent directory memory information.
+ */
+
+typedef union md_dir_high {
+ md_sdir_high_t md_sdir_high;
+ md_pdir_high_t md_pdir_high;
+} md_dir_high_t;
+
+typedef union md_dir_low {
+ md_sdir_low_t md_sdir_low;
+ md_pdir_low_t md_pdir_low;
+} md_dir_low_t;
+
+typedef struct bddir_entry {
+ md_dir_low_t md_dir_low;
+ md_dir_high_t md_dir_high;
+} bddir_entry_t;
+
+typedef struct dir_mem_entry {
+ u64 prcpf[MAX_REGIONS];
+ bddir_entry_t directory_words[MD_PAGE_SIZE/CACHE_SLINE_SIZE];
+} dir_mem_entry_t;
+
+
+
+typedef union md_perf_sel {
+ u64 perf_sel_reg;
+ struct {
+ u64 perf_rsvd : 60,
+ perf_en : 1,
+ perf_sel : 3;
+ } perf_sel_bits;
+} md_perf_sel_t;
+
+typedef union md_perf_cnt {
+ u64 perf_cnt;
+ struct {
+ u64 perf_rsvd : 44,
+ perf_cnt : 20;
+ } perf_cnt_bits;
+} md_perf_cnt_t;
+
+
+#endif /* !__ASSEMBLY__ */
+
+
+#define DIR_ERROR_VALID_MASK 0xe000000000000000
+#define DIR_ERROR_VALID_SHFT 61
+#define DIR_ERROR_VALID_UCE 0x8000000000000000
+#define DIR_ERROR_VALID_AE 0x4000000000000000
+#define DIR_ERROR_VALID_CE 0x2000000000000000
+
+#define MEM_ERROR_VALID_MASK 0xc000000000000000
+#define MEM_ERROR_VALID_SHFT 62
+#define MEM_ERROR_VALID_UCE 0x8000000000000000
+#define MEM_ERROR_VALID_CE 0x4000000000000000
+
+#define PROTO_ERROR_VALID_MASK 0x8000000000000000
+
+#define MISC_ERROR_VALID_MASK 0x3ff
+
+/*
+ * Mask for hspec address that is stored in the dir error register.
+ * This represents bits 29 through 3.
+ */
+#define DIR_ERR_HSPEC_MASK 0x3ffffff8
+#define ERROR_HSPEC_MASK 0x3ffffff8
+#define ERROR_HSPEC_SHFT 3
+#define ERROR_ADDR_MASK 0xfffffff8
+#define ERROR_ADDR_SHFT 3
+
+/*
+ * MD_MISC_ERROR register defines.
+ */
+
+#define MMCE_VALID_MASK 0x3ff
+#define MMCE_ILL_MSG_SHFT 8
+#define MMCE_ILL_MSG_MASK (UINT64_CAST 0x03 << MMCE_ILL_MSG_SHFT)
+#define MMCE_ILL_REV_SHFT 6
+#define MMCE_ILL_REV_MASK (UINT64_CAST 0x03 << MMCE_ILL_REV_SHFT)
+#define MMCE_LONG_PACK_SHFT 4
+#define MMCE_LONG_PACK_MASK (UINT64_CAST 0x03 << MMCE_lONG_PACK_SHFT)
+#define MMCE_SHORT_PACK_SHFT 2
+#define MMCE_SHORT_PACK_MASK (UINT64_CAST 0x03 << MMCE_SHORT_PACK_SHFT)
+#define MMCE_BAD_DATA_SHFT 0
+#define MMCE_BAD_DATA_MASK (UINT64_CAST 0x03 << MMCE_BAD_DATA_SHFT)
+
+
+#define MD_PERF_COUNTERS 6
+#define MD_PERF_SETS 6
+
+#define MEM_DIMM_MASK 0xe0000000
+#define MEM_DIMM_SHFT 29
+
+#endif /* _ASM_SN_SN0_HUBMD_H */
diff --git a/arch/mips/include/asm/sn/sn0/hubni.h b/arch/mips/include/asm/sn/sn0/hubni.h
new file mode 100644
index 00000000000..b40d3ef97a1
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/hubni.h
@@ -0,0 +1,255 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/hubni.h>, Revision 1.27.
+ *
+ * Copyright (C) 1992-1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_SGI_SN0_HUBNI_H
+#define _ASM_SGI_SN0_HUBNI_H
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#endif
+
+/*
+ * Hub Network Interface registers
+ *
+ * All registers in this file are subject to change until Hub chip tapeout.
+ */
+
+#define NI_BASE 0x600000
+#define NI_BASE_TABLES 0x630000
+
+#define NI_STATUS_REV_ID 0x600000 /* Hub network status, rev, and ID */
+#define NI_PORT_RESET 0x600008 /* Reset the network interface */
+#define NI_PROTECTION 0x600010 /* NI register access permissions */
+#define NI_GLOBAL_PARMS 0x600018 /* LLP parameters */
+#define NI_SCRATCH_REG0 0x600100 /* Scratch register 0 (64 bits) */
+#define NI_SCRATCH_REG1 0x600108 /* Scratch register 1 (64 bits) */
+#define NI_DIAG_PARMS 0x600110 /* Parameters for diags */
+
+#define NI_VECTOR_PARMS 0x600200 /* Vector PIO routing parameters */
+#define NI_VECTOR 0x600208 /* Vector PIO route */
+#define NI_VECTOR_DATA 0x600210 /* Vector PIO data */
+#define NI_VECTOR_STATUS 0x600300 /* Vector PIO return status */
+#define NI_RETURN_VECTOR 0x600308 /* Vector PIO return vector */
+#define NI_VECTOR_READ_DATA 0x600310 /* Vector PIO read data */
+#define NI_VECTOR_CLEAR 0x600380 /* Vector PIO read & clear status */
+
+#define NI_IO_PROTECT 0x600400 /* PIO protection bits */
+#define NI_IO_PROT_OVRRD 0x600408 /* PIO protection bit override */
+
+#define NI_AGE_CPU0_MEMORY 0x600500 /* CPU 0 memory age control */
+#define NI_AGE_CPU0_PIO 0x600508 /* CPU 0 PIO age control */
+#define NI_AGE_CPU1_MEMORY 0x600510 /* CPU 1 memory age control */
+#define NI_AGE_CPU1_PIO 0x600518 /* CPU 1 PIO age control */
+#define NI_AGE_GBR_MEMORY 0x600520 /* GBR memory age control */
+#define NI_AGE_GBR_PIO 0x600528 /* GBR PIO age control */
+#define NI_AGE_IO_MEMORY 0x600530 /* IO memory age control */
+#define NI_AGE_IO_PIO 0x600538 /* IO PIO age control */
+#define NI_AGE_REG_MIN NI_AGE_CPU0_MEMORY
+#define NI_AGE_REG_MAX NI_AGE_IO_PIO
+
+#define NI_PORT_PARMS 0x608000 /* LLP Parameters */
+#define NI_PORT_ERROR 0x608008 /* LLP Errors */
+#define NI_PORT_ERROR_CLEAR 0x608088 /* Clear the error bits */
+
+#define NI_META_TABLE0 0x638000 /* First meta routing table entry */
+#define NI_META_TABLE(_x) (NI_META_TABLE0 + (8 * (_x)))
+#define NI_META_ENTRIES 32
+
+#define NI_LOCAL_TABLE0 0x638100 /* First local routing table entry */
+#define NI_LOCAL_TABLE(_x) (NI_LOCAL_TABLE0 + (8 * (_x)))
+#define NI_LOCAL_ENTRIES 16
+
+/*
+ * NI_STATUS_REV_ID mask and shift definitions
+ * Have to use UINT64_CAST instead of 'L' suffix, for assembler.
+ */
+
+#define NSRI_8BITMODE_SHFT 30
+#define NSRI_8BITMODE_MASK (UINT64_CAST 0x1 << 30)
+#define NSRI_LINKUP_SHFT 29
+#define NSRI_LINKUP_MASK (UINT64_CAST 0x1 << 29)
+#define NSRI_DOWNREASON_SHFT 28 /* 0=failed, 1=never came */
+#define NSRI_DOWNREASON_MASK (UINT64_CAST 0x1 << 28) /* out of reset. */
+#define NSRI_MORENODES_SHFT 18
+#define NSRI_MORENODES_MASK (UINT64_CAST 1 << 18) /* Max. # of nodes */
+#define MORE_MEMORY 0
+#define MORE_NODES 1
+#define NSRI_REGIONSIZE_SHFT 17
+#define NSRI_REGIONSIZE_MASK (UINT64_CAST 1 << 17) /* Granularity */
+#define REGIONSIZE_FINE 1
+#define REGIONSIZE_COARSE 0
+#define NSRI_NODEID_SHFT 8
+#define NSRI_NODEID_MASK (UINT64_CAST 0x1ff << 8)/* Node (Hub) ID */
+#define NSRI_REV_SHFT 4
+#define NSRI_REV_MASK (UINT64_CAST 0xf << 4) /* Chip Revision */
+#define NSRI_CHIPID_SHFT 0
+#define NSRI_CHIPID_MASK (UINT64_CAST 0xf) /* Chip type ID */
+
+/*
+ * In fine mode, each node is a region. In coarse mode, there are
+ * eight nodes per region.
+ */
+#define NASID_TO_FINEREG_SHFT 0
+#define NASID_TO_COARSEREG_SHFT 3
+
+/* NI_PORT_RESET mask definitions */
+
+#define NPR_PORTRESET (UINT64_CAST 1 << 7) /* Send warm reset */
+#define NPR_LINKRESET (UINT64_CAST 1 << 1) /* Send link reset */
+#define NPR_LOCALRESET (UINT64_CAST 1) /* Reset entire hub */
+
+/* NI_PROTECTION mask and shift definitions */
+
+#define NPROT_RESETOK (UINT64_CAST 1)
+
+/* NI_GLOBAL_PARMS mask and shift definitions */
+
+#define NGP_MAXRETRY_SHFT 48 /* Maximum retries */
+#define NGP_MAXRETRY_MASK (UINT64_CAST 0x3ff << 48)
+#define NGP_TAILTOWRAP_SHFT 32 /* Tail timeout wrap */
+#define NGP_TAILTOWRAP_MASK (UINT64_CAST 0xffff << 32)
+
+#define NGP_CREDITTOVAL_SHFT 16 /* Tail timeout wrap */
+#define NGP_CREDITTOVAL_MASK (UINT64_CAST 0xf << 16)
+#define NGP_TAILTOVAL_SHFT 4 /* Tail timeout value */
+#define NGP_TAILTOVAL_MASK (UINT64_CAST 0xf << 4)
+
+/* NI_DIAG_PARMS mask and shift definitions */
+
+#define NDP_PORTTORESET (UINT64_CAST 1 << 18) /* Port tmout reset */
+#define NDP_LLP8BITMODE (UINT64_CAST 1 << 12) /* LLP 8-bit mode */
+#define NDP_PORTDISABLE (UINT64_CAST 1 << 6) /* Port disable */
+#define NDP_SENDERROR (UINT64_CAST 1) /* Send data error */
+
+/*
+ * NI_VECTOR_PARMS mask and shift definitions.
+ * TYPE may be any of the first four PIOTYPEs defined under NI_VECTOR_STATUS.
+ */
+
+#define NVP_PIOID_SHFT 40
+#define NVP_PIOID_MASK (UINT64_CAST 0x3ff << 40)
+#define NVP_WRITEID_SHFT 32
+#define NVP_WRITEID_MASK (UINT64_CAST 0xff << 32)
+#define NVP_ADDRESS_MASK (UINT64_CAST 0xffff8) /* Bits 19:3 */
+#define NVP_TYPE_SHFT 0
+#define NVP_TYPE_MASK (UINT64_CAST 0x3)
+
+/* NI_VECTOR_STATUS mask and shift definitions */
+
+#define NVS_VALID (UINT64_CAST 1 << 63)
+#define NVS_OVERRUN (UINT64_CAST 1 << 62)
+#define NVS_TARGET_SHFT 51
+#define NVS_TARGET_MASK (UINT64_CAST 0x3ff << 51)
+#define NVS_PIOID_SHFT 40
+#define NVS_PIOID_MASK (UINT64_CAST 0x3ff << 40)
+#define NVS_WRITEID_SHFT 32
+#define NVS_WRITEID_MASK (UINT64_CAST 0xff << 32)
+#define NVS_ADDRESS_MASK (UINT64_CAST 0xfffffff8) /* Bits 31:3 */
+#define NVS_TYPE_SHFT 0
+#define NVS_TYPE_MASK (UINT64_CAST 0x7)
+#define NVS_ERROR_MASK (UINT64_CAST 0x4) /* bit set means error */
+
+
+#define PIOTYPE_READ 0 /* VECTOR_PARMS and VECTOR_STATUS */
+#define PIOTYPE_WRITE 1 /* VECTOR_PARMS and VECTOR_STATUS */
+#define PIOTYPE_UNDEFINED 2 /* VECTOR_PARMS and VECTOR_STATUS */
+#define PIOTYPE_EXCHANGE 3 /* VECTOR_PARMS and VECTOR_STATUS */
+#define PIOTYPE_ADDR_ERR 4 /* VECTOR_STATUS only */
+#define PIOTYPE_CMD_ERR 5 /* VECTOR_STATUS only */
+#define PIOTYPE_PROT_ERR 6 /* VECTOR_STATUS only */
+#define PIOTYPE_UNKNOWN 7 /* VECTOR_STATUS only */
+
+/* NI_AGE_XXX mask and shift definitions */
+
+#define NAGE_VCH_SHFT 10
+#define NAGE_VCH_MASK (UINT64_CAST 3 << 10)
+#define NAGE_CC_SHFT 8
+#define NAGE_CC_MASK (UINT64_CAST 3 << 8)
+#define NAGE_AGE_SHFT 0
+#define NAGE_AGE_MASK (UINT64_CAST 0xff)
+#define NAGE_MASK (NAGE_VCH_MASK | NAGE_CC_MASK | NAGE_AGE_MASK)
+
+#define VCHANNEL_A 0
+#define VCHANNEL_B 1
+#define VCHANNEL_ANY 2
+
+/* NI_PORT_PARMS mask and shift definitions */
+
+#define NPP_NULLTO_SHFT 10
+#define NPP_NULLTO_MASK (UINT64_CAST 0x3f << 16)
+#define NPP_MAXBURST_SHFT 0
+#define NPP_MAXBURST_MASK (UINT64_CAST 0x3ff)
+#define NPP_RESET_DFLT_HUB20 ((UINT64_CAST 1 << NPP_NULLTO_SHFT) | \
+ (UINT64_CAST 0x3f0 << NPP_MAXBURST_SHFT))
+#define NPP_RESET_DEFAULTS ((UINT64_CAST 6 << NPP_NULLTO_SHFT) | \
+ (UINT64_CAST 0x3f0 << NPP_MAXBURST_SHFT))
+
+
+/* NI_PORT_ERROR mask and shift definitions */
+
+#define NPE_LINKRESET (UINT64_CAST 1 << 37)
+#define NPE_INTERNALERROR (UINT64_CAST 1 << 36)
+#define NPE_BADMESSAGE (UINT64_CAST 1 << 35)
+#define NPE_BADDEST (UINT64_CAST 1 << 34)
+#define NPE_FIFOOVERFLOW (UINT64_CAST 1 << 33)
+#define NPE_CREDITTO_SHFT 28
+#define NPE_CREDITTO_MASK (UINT64_CAST 0xf << 28)
+#define NPE_TAILTO_SHFT 24
+#define NPE_TAILTO_MASK (UINT64_CAST 0xf << 24)
+#define NPE_RETRYCOUNT_SHFT 16
+#define NPE_RETRYCOUNT_MASK (UINT64_CAST 0xff << 16)
+#define NPE_CBERRCOUNT_SHFT 8
+#define NPE_CBERRCOUNT_MASK (UINT64_CAST 0xff << 8)
+#define NPE_SNERRCOUNT_SHFT 0
+#define NPE_SNERRCOUNT_MASK (UINT64_CAST 0xff << 0)
+#define NPE_MASK 0x3effffffff
+
+#define NPE_COUNT_MAX 0xff
+
+#define NPE_FATAL_ERRORS (NPE_LINKRESET | NPE_INTERNALERROR | \
+ NPE_BADMESSAGE | NPE_BADDEST | \
+ NPE_FIFOOVERFLOW | NPE_CREDITTO_MASK | \
+ NPE_TAILTO_MASK)
+
+/* NI_META_TABLE mask and shift definitions */
+
+#define NMT_EXIT_PORT_MASK (UINT64_CAST 0xf)
+
+/* NI_LOCAL_TABLE mask and shift definitions */
+
+#define NLT_EXIT_PORT_MASK (UINT64_CAST 0xf)
+
+#ifndef __ASSEMBLY__
+
+typedef union hubni_port_error_u {
+ u64 nipe_reg_value;
+ struct {
+ u64 nipe_rsvd: 26, /* unused */
+ nipe_lnk_reset: 1, /* link reset */
+ nipe_intl_err: 1, /* internal error */
+ nipe_bad_msg: 1, /* bad message */
+ nipe_bad_dest: 1, /* bad dest */
+ nipe_fifo_ovfl: 1, /* fifo overflow */
+ nipe_rsvd1: 1, /* unused */
+ nipe_credit_to: 4, /* credit timeout */
+ nipe_tail_to: 4, /* tail timeout */
+ nipe_retry_cnt: 8, /* retry error count */
+ nipe_cb_cnt: 8, /* checkbit error count */
+ nipe_sn_cnt: 8; /* sequence number count */
+ } nipe_fields_s;
+} hubni_port_error_t;
+
+#define NI_LLP_RETRY_MAX 0xff
+#define NI_LLP_CB_MAX 0xff
+#define NI_LLP_SN_MAX 0xff
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_SGI_SN0_HUBNI_H */
diff --git a/arch/mips/include/asm/sn/sn0/hubpi.h b/arch/mips/include/asm/sn/sn0/hubpi.h
new file mode 100644
index 00000000000..e39f5f9da04
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/hubpi.h
@@ -0,0 +1,409 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/hubpi.h>, revision 1.28.
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_SN_SN0_HUBPI_H
+#define _ASM_SN_SN0_HUBPI_H
+
+#include <linux/types.h>
+
+/*
+ * Hub I/O interface registers
+ *
+ * All registers in this file are subject to change until Hub chip tapeout.
+ * All register "addresses" are actually offsets. Use the LOCAL_HUB
+ * or REMOTE_HUB macros to synthesize an actual address
+ */
+
+#define PI_BASE 0x000000
+
+/* General protection and control registers */
+
+#define PI_CPU_PROTECT 0x000000 /* CPU Protection */
+#define PI_PROT_OVERRD 0x000008 /* Clear CPU Protection bit */
+#define PI_IO_PROTECT 0x000010 /* Interrupt Pending Protection */
+#define PI_REGION_PRESENT 0x000018 /* Indicates whether region exists */
+#define PI_CPU_NUM 0x000020 /* CPU Number ID */
+#define PI_CALIAS_SIZE 0x000028 /* Cached Alias Size */
+#define PI_MAX_CRB_TIMEOUT 0x000030 /* Maximum Timeout for CRB */
+#define PI_CRB_SFACTOR 0x000038 /* Scale factor for CRB timeout */
+
+/* CALIAS values */
+#define PI_CALIAS_SIZE_0 0
+#define PI_CALIAS_SIZE_4K 1
+#define PI_CALIAS_SIZE_8K 2
+#define PI_CALIAS_SIZE_16K 3
+#define PI_CALIAS_SIZE_32K 4
+#define PI_CALIAS_SIZE_64K 5
+#define PI_CALIAS_SIZE_128K 6
+#define PI_CALIAS_SIZE_256K 7
+#define PI_CALIAS_SIZE_512K 8
+#define PI_CALIAS_SIZE_1M 9
+#define PI_CALIAS_SIZE_2M 10
+#define PI_CALIAS_SIZE_4M 11
+#define PI_CALIAS_SIZE_8M 12
+#define PI_CALIAS_SIZE_16M 13
+#define PI_CALIAS_SIZE_32M 14
+#define PI_CALIAS_SIZE_64M 15
+
+/* Processor control and status checking */
+
+#define PI_CPU_PRESENT_A 0x000040 /* CPU Present A */
+#define PI_CPU_PRESENT_B 0x000048 /* CPU Present B */
+#define PI_CPU_ENABLE_A 0x000050 /* CPU Enable A */
+#define PI_CPU_ENABLE_B 0x000058 /* CPU Enable B */
+#define PI_REPLY_LEVEL 0x000060 /* Reply Level */
+#define PI_HARDRESET_BIT 0x020068 /* Bit cleared by s/w on SR */
+#define PI_NMI_A 0x000070 /* NMI to CPU A */
+#define PI_NMI_B 0x000078 /* NMI to CPU B */
+#define PI_NMI_OFFSET (PI_NMI_B - PI_NMI_A)
+#define PI_SOFTRESET 0x000080 /* Softreset (to both CPUs) */
+
+/* Regular Interrupt register checking. */
+
+#define PI_INT_PEND_MOD 0x000090 /* Write to set pending ints */
+#define PI_INT_PEND0 0x000098 /* Read to get pending ints */
+#define PI_INT_PEND1 0x0000a0 /* Read to get pending ints */
+#define PI_INT_MASK0_A 0x0000a8 /* Interrupt Mask 0 for CPU A */
+#define PI_INT_MASK1_A 0x0000b0 /* Interrupt Mask 1 for CPU A */
+#define PI_INT_MASK0_B 0x0000b8 /* Interrupt Mask 0 for CPU B */
+#define PI_INT_MASK1_B 0x0000c0 /* Interrupt Mask 1 for CPU B */
+
+#define PI_INT_MASK_OFFSET 0x10 /* Offset from A to B */
+
+/* Crosscall interrupts */
+
+#define PI_CC_PEND_SET_A 0x0000c8 /* CC Interrupt Pending Set, CPU A */
+#define PI_CC_PEND_SET_B 0x0000d0 /* CC Interrupt Pending Set, CPU B */
+#define PI_CC_PEND_CLR_A 0x0000d8 /* CC Interrupt Pending Clr, CPU A */
+#define PI_CC_PEND_CLR_B 0x0000e0 /* CC Interrupt Pending Clr, CPU B */
+#define PI_CC_MASK 0x0000e8 /* CC Interrupt mask */
+
+#define PI_INT_SET_OFFSET 0x08 /* Offset from A to B */
+
+/* Realtime Counter and Profiler control registers */
+
+#define PI_RT_COUNT 0x030100 /* Real Time Counter */
+#define PI_RT_COMPARE_A 0x000108 /* Real Time Compare A */
+#define PI_RT_COMPARE_B 0x000110 /* Real Time Compare B */
+#define PI_PROFILE_COMPARE 0x000118 /* L5 int to both cpus when == RTC */
+#define PI_RT_PEND_A 0x000120 /* Set if RT int for A pending */
+#define PI_RT_PEND_B 0x000128 /* Set if RT int for B pending */
+#define PI_PROF_PEND_A 0x000130 /* Set if Prof int for A pending */
+#define PI_PROF_PEND_B 0x000138 /* Set if Prof int for B pending */
+#define PI_RT_EN_A 0x000140 /* RT int for CPU A enable */
+#define PI_RT_EN_B 0x000148 /* RT int for CPU B enable */
+#define PI_PROF_EN_A 0x000150 /* PROF int for CPU A enable */
+#define PI_PROF_EN_B 0x000158 /* PROF int for CPU B enable */
+#define PI_RT_LOCAL_CTRL 0x000160 /* RT control register */
+#define PI_RT_FILTER_CTRL 0x000168 /* GCLK Filter control register */
+
+#define PI_COUNT_OFFSET 0x08 /* A to B offset for all counts */
+
+/* Built-In Self Test support */
+
+#define PI_BIST_WRITE_DATA 0x000200 /* BIST write data */
+#define PI_BIST_READ_DATA 0x000208 /* BIST read data */
+#define PI_BIST_COUNT_TARG 0x000210 /* BIST Count and Target */
+#define PI_BIST_READY 0x000218 /* BIST Ready indicator */
+#define PI_BIST_SHIFT_LOAD 0x000220 /* BIST control */
+#define PI_BIST_SHIFT_UNLOAD 0x000228 /* BIST control */
+#define PI_BIST_ENTER_RUN 0x000230 /* BIST control */
+
+/* Graphics control registers */
+
+#define PI_GFX_PAGE_A 0x000300 /* Graphics page A */
+#define PI_GFX_CREDIT_CNTR_A 0x000308 /* Graphics credit counter A */
+#define PI_GFX_BIAS_A 0x000310 /* Graphics bias A */
+#define PI_GFX_INT_CNTR_A 0x000318 /* Graphics interrupt counter A */
+#define PI_GFX_INT_CMP_A 0x000320 /* Graphics interrupt comparator A */
+#define PI_GFX_PAGE_B 0x000328 /* Graphics page B */
+#define PI_GFX_CREDIT_CNTR_B 0x000330 /* Graphics credit counter B */
+#define PI_GFX_BIAS_B 0x000338 /* Graphics bias B */
+#define PI_GFX_INT_CNTR_B 0x000340 /* Graphics interrupt counter B */
+#define PI_GFX_INT_CMP_B 0x000348 /* Graphics interrupt comparator B */
+
+#define PI_GFX_OFFSET (PI_GFX_PAGE_B - PI_GFX_PAGE_A)
+#define PI_GFX_PAGE_ENABLE 0x0000010000000000LL
+
+/* Error and timeout registers */
+#define PI_ERR_INT_PEND 0x000400 /* Error Interrupt Pending */
+#define PI_ERR_INT_MASK_A 0x000408 /* Error Interrupt mask for CPU A */
+#define PI_ERR_INT_MASK_B 0x000410 /* Error Interrupt mask for CPU B */
+#define PI_ERR_STACK_ADDR_A 0x000418 /* Error stack address for CPU A */
+#define PI_ERR_STACK_ADDR_B 0x000420 /* Error stack address for CPU B */
+#define PI_ERR_STACK_SIZE 0x000428 /* Error Stack Size */
+#define PI_ERR_STATUS0_A 0x000430 /* Error Status 0A */
+#define PI_ERR_STATUS0_A_RCLR 0x000438 /* Error Status 0A clear on read */
+#define PI_ERR_STATUS1_A 0x000440 /* Error Status 1A */
+#define PI_ERR_STATUS1_A_RCLR 0x000448 /* Error Status 1A clear on read */
+#define PI_ERR_STATUS0_B 0x000450 /* Error Status 0B */
+#define PI_ERR_STATUS0_B_RCLR 0x000458 /* Error Status 0B clear on read */
+#define PI_ERR_STATUS1_B 0x000460 /* Error Status 1B */
+#define PI_ERR_STATUS1_B_RCLR 0x000468 /* Error Status 1B clear on read */
+#define PI_SPOOL_CMP_A 0x000470 /* Spool compare for CPU A */
+#define PI_SPOOL_CMP_B 0x000478 /* Spool compare for CPU B */
+#define PI_CRB_TIMEOUT_A 0x000480 /* Timed out CRB entries for A */
+#define PI_CRB_TIMEOUT_B 0x000488 /* Timed out CRB entries for B */
+#define PI_SYSAD_ERRCHK_EN 0x000490 /* Enables SYSAD error checking */
+#define PI_BAD_CHECK_BIT_A 0x000498 /* Force SYSAD check bit error */
+#define PI_BAD_CHECK_BIT_B 0x0004a0 /* Force SYSAD check bit error */
+#define PI_NACK_CNT_A 0x0004a8 /* Consecutive NACK counter */
+#define PI_NACK_CNT_B 0x0004b0 /* " " for CPU B */
+#define PI_NACK_CMP 0x0004b8 /* NACK count compare */
+#define PI_STACKADDR_OFFSET (PI_ERR_STACK_ADDR_B - PI_ERR_STACK_ADDR_A)
+#define PI_ERRSTAT_OFFSET (PI_ERR_STATUS0_B - PI_ERR_STATUS0_A)
+#define PI_RDCLR_OFFSET (PI_ERR_STATUS0_A_RCLR - PI_ERR_STATUS0_A)
+
+/* Bits in PI_ERR_INT_PEND */
+#define PI_ERR_SPOOL_CMP_B 0x00000001 /* Spool end hit high water */
+#define PI_ERR_SPOOL_CMP_A 0x00000002
+#define PI_ERR_SPUR_MSG_B 0x00000004 /* Spurious message intr. */
+#define PI_ERR_SPUR_MSG_A 0x00000008
+#define PI_ERR_WRB_TERR_B 0x00000010 /* WRB TERR */
+#define PI_ERR_WRB_TERR_A 0x00000020
+#define PI_ERR_WRB_WERR_B 0x00000040 /* WRB WERR */
+#define PI_ERR_WRB_WERR_A 0x00000080
+#define PI_ERR_SYSSTATE_B 0x00000100 /* SysState parity error */
+#define PI_ERR_SYSSTATE_A 0x00000200
+#define PI_ERR_SYSAD_DATA_B 0x00000400 /* SysAD data parity error */
+#define PI_ERR_SYSAD_DATA_A 0x00000800
+#define PI_ERR_SYSAD_ADDR_B 0x00001000 /* SysAD addr parity error */
+#define PI_ERR_SYSAD_ADDR_A 0x00002000
+#define PI_ERR_SYSCMD_DATA_B 0x00004000 /* SysCmd data parity error */
+#define PI_ERR_SYSCMD_DATA_A 0x00008000
+#define PI_ERR_SYSCMD_ADDR_B 0x00010000 /* SysCmd addr parity error */
+#define PI_ERR_SYSCMD_ADDR_A 0x00020000
+#define PI_ERR_BAD_SPOOL_B 0x00040000 /* Error spooling to memory */
+#define PI_ERR_BAD_SPOOL_A 0x00080000
+#define PI_ERR_UNCAC_UNCORR_B 0x00100000 /* Uncached uncorrectable */
+#define PI_ERR_UNCAC_UNCORR_A 0x00200000
+#define PI_ERR_SYSSTATE_TAG_B 0x00400000 /* SysState tag parity error */
+#define PI_ERR_SYSSTATE_TAG_A 0x00800000
+#define PI_ERR_MD_UNCORR 0x01000000 /* Must be cleared in MD */
+
+#define PI_ERR_CLEAR_ALL_A 0x00aaaaaa
+#define PI_ERR_CLEAR_ALL_B 0x00555555
+
+
+/*
+ * The following three macros define all possible error int pends.
+ */
+
+#define PI_FATAL_ERR_CPU_A (PI_ERR_SYSSTATE_TAG_A | \
+ PI_ERR_BAD_SPOOL_A | \
+ PI_ERR_SYSCMD_ADDR_A | \
+ PI_ERR_SYSCMD_DATA_A | \
+ PI_ERR_SYSAD_ADDR_A | \
+ PI_ERR_SYSAD_DATA_A | \
+ PI_ERR_SYSSTATE_A)
+
+#define PI_MISC_ERR_CPU_A (PI_ERR_UNCAC_UNCORR_A | \
+ PI_ERR_WRB_WERR_A | \
+ PI_ERR_WRB_TERR_A | \
+ PI_ERR_SPUR_MSG_A | \
+ PI_ERR_SPOOL_CMP_A)
+
+#define PI_FATAL_ERR_CPU_B (PI_ERR_SYSSTATE_TAG_B | \
+ PI_ERR_BAD_SPOOL_B | \
+ PI_ERR_SYSCMD_ADDR_B | \
+ PI_ERR_SYSCMD_DATA_B | \
+ PI_ERR_SYSAD_ADDR_B | \
+ PI_ERR_SYSAD_DATA_B | \
+ PI_ERR_SYSSTATE_B)
+
+#define PI_MISC_ERR_CPU_B (PI_ERR_UNCAC_UNCORR_B | \
+ PI_ERR_WRB_WERR_B | \
+ PI_ERR_WRB_TERR_B | \
+ PI_ERR_SPUR_MSG_B | \
+ PI_ERR_SPOOL_CMP_B)
+
+#define PI_ERR_GENERIC (PI_ERR_MD_UNCORR)
+
+/*
+ * Error types for PI_ERR_STATUS0_[AB] and error stack:
+ * Use the write types if WRBRRB is 1 else use the read types
+ */
+
+/* Fields in PI_ERR_STATUS0_[AB] */
+#define PI_ERR_ST0_TYPE_MASK 0x0000000000000007
+#define PI_ERR_ST0_TYPE_SHFT 0
+#define PI_ERR_ST0_REQNUM_MASK 0x0000000000000038
+#define PI_ERR_ST0_REQNUM_SHFT 3
+#define PI_ERR_ST0_SUPPL_MASK 0x000000000001ffc0
+#define PI_ERR_ST0_SUPPL_SHFT 6
+#define PI_ERR_ST0_CMD_MASK 0x0000000001fe0000
+#define PI_ERR_ST0_CMD_SHFT 17
+#define PI_ERR_ST0_ADDR_MASK 0x3ffffffffe000000
+#define PI_ERR_ST0_ADDR_SHFT 25
+#define PI_ERR_ST0_OVERRUN_MASK 0x4000000000000000
+#define PI_ERR_ST0_OVERRUN_SHFT 62
+#define PI_ERR_ST0_VALID_MASK 0x8000000000000000
+#define PI_ERR_ST0_VALID_SHFT 63
+
+/* Fields in PI_ERR_STATUS1_[AB] */
+#define PI_ERR_ST1_SPOOL_MASK 0x00000000001fffff
+#define PI_ERR_ST1_SPOOL_SHFT 0
+#define PI_ERR_ST1_TOUTCNT_MASK 0x000000001fe00000
+#define PI_ERR_ST1_TOUTCNT_SHFT 21
+#define PI_ERR_ST1_INVCNT_MASK 0x0000007fe0000000
+#define PI_ERR_ST1_INVCNT_SHFT 29
+#define PI_ERR_ST1_CRBNUM_MASK 0x0000038000000000
+#define PI_ERR_ST1_CRBNUM_SHFT 39
+#define PI_ERR_ST1_WRBRRB_MASK 0x0000040000000000
+#define PI_ERR_ST1_WRBRRB_SHFT 42
+#define PI_ERR_ST1_CRBSTAT_MASK 0x001ff80000000000
+#define PI_ERR_ST1_CRBSTAT_SHFT 43
+#define PI_ERR_ST1_MSGSRC_MASK 0xffe0000000000000
+#define PI_ERR_ST1_MSGSRC_SHFT 53
+
+/* Fields in the error stack */
+#define PI_ERR_STK_TYPE_MASK 0x0000000000000003
+#define PI_ERR_STK_TYPE_SHFT 0
+#define PI_ERR_STK_SUPPL_MASK 0x0000000000000038
+#define PI_ERR_STK_SUPPL_SHFT 3
+#define PI_ERR_STK_REQNUM_MASK 0x00000000000001c0
+#define PI_ERR_STK_REQNUM_SHFT 6
+#define PI_ERR_STK_CRBNUM_MASK 0x0000000000000e00
+#define PI_ERR_STK_CRBNUM_SHFT 9
+#define PI_ERR_STK_WRBRRB_MASK 0x0000000000001000
+#define PI_ERR_STK_WRBRRB_SHFT 12
+#define PI_ERR_STK_CRBSTAT_MASK 0x00000000007fe000
+#define PI_ERR_STK_CRBSTAT_SHFT 13
+#define PI_ERR_STK_CMD_MASK 0x000000007f800000
+#define PI_ERR_STK_CMD_SHFT 23
+#define PI_ERR_STK_ADDR_MASK 0xffffffff80000000
+#define PI_ERR_STK_ADDR_SHFT 31
+
+/* Error type in the error status or stack on Read CRBs */
+#define PI_ERR_RD_PRERR 1
+#define PI_ERR_RD_DERR 2
+#define PI_ERR_RD_TERR 3
+
+/* Error type in the error status or stack on Write CRBs */
+#define PI_ERR_WR_WERR 0
+#define PI_ERR_WR_PWERR 1
+#define PI_ERR_WR_TERR 3
+
+/* Read or Write CRB in error status or stack */
+#define PI_ERR_RRB 0
+#define PI_ERR_WRB 1
+#define PI_ERR_ANY_CRB 2
+
+/* Address masks in the error status and error stack are not the same */
+#define ERR_STK_ADDR_SHFT 7
+#define ERR_STAT0_ADDR_SHFT 3
+
+#define PI_MIN_STACK_SIZE 4096 /* For figuring out the size to set */
+#define PI_STACK_SIZE_SHFT 12 /* 4k */
+
+#define ERR_STACK_SIZE_BYTES(_sz) \
+ ((_sz) ? (PI_MIN_STACK_SIZE << ((_sz) - 1)) : 0)
+
+#ifndef __ASSEMBLY__
+/*
+ * format of error stack and error status registers.
+ */
+
+struct err_stack_format {
+ u64 sk_addr : 33, /* address */
+ sk_cmd : 8, /* message command */
+ sk_crb_sts : 10, /* status from RRB or WRB */
+ sk_rw_rb : 1, /* RRB == 0, WRB == 1 */
+ sk_crb_num : 3, /* WRB (0 to 7) or RRB (0 to 4) */
+ sk_t5_req : 3, /* RRB T5 request number */
+ sk_suppl : 3, /* lowest 3 bit of supplemental */
+ sk_err_type: 3; /* error type */
+};
+
+typedef union pi_err_stack {
+ u64 pi_stk_word;
+ struct err_stack_format pi_stk_fmt;
+} pi_err_stack_t;
+
+struct err_status0_format {
+ u64 s0_valid : 1, /* Valid */
+ s0_ovr_run : 1, /* Overrun, spooled to memory */
+ s0_addr : 37, /* address */
+ s0_cmd : 8, /* message command */
+ s0_supl : 11, /* message supplemental field */
+ s0_t5_req : 3, /* RRB T5 request number */
+ s0_err_type: 3; /* error type */
+};
+
+typedef union pi_err_stat0 {
+ u64 pi_stat0_word;
+ struct err_status0_format pi_stat0_fmt;
+} pi_err_stat0_t;
+
+struct err_status1_format {
+ u64 s1_src : 11, /* message source */
+ s1_crb_sts : 10, /* status from RRB or WRB */
+ s1_rw_rb : 1, /* RRB == 0, WRB == 1 */
+ s1_crb_num : 3, /* WRB (0 to 7) or RRB (0 to 4) */
+ s1_inval_cnt:10, /* signed invalidate counter RRB */
+ s1_to_cnt : 8, /* crb timeout counter */
+ s1_spl_cnt : 21; /* number spooled to memory */
+};
+
+typedef union pi_err_stat1 {
+ u64 pi_stat1_word;
+ struct err_status1_format pi_stat1_fmt;
+} pi_err_stat1_t;
+
+typedef u64 rtc_time_t;
+
+#endif /* !__ASSEMBLY__ */
+
+
+/* Bits in PI_SYSAD_ERRCHK_EN */
+#define PI_SYSAD_ERRCHK_ECCGEN 0x01 /* Enable ECC generation */
+#define PI_SYSAD_ERRCHK_QUALGEN 0x02 /* Enable data quality signal gen. */
+#define PI_SYSAD_ERRCHK_SADP 0x04 /* Enable SysAD parity checking */
+#define PI_SYSAD_ERRCHK_CMDP 0x08 /* Enable SysCmd parity checking */
+#define PI_SYSAD_ERRCHK_STATE 0x10 /* Enable SysState parity checking */
+#define PI_SYSAD_ERRCHK_QUAL 0x20 /* Enable data quality checking */
+#define PI_SYSAD_CHECK_ALL 0x3f /* Generate and check all signals. */
+
+/* Interrupt pending bits on R10000 */
+
+#define HUB_IP_PEND0 0x0400
+#define HUB_IP_PEND1_CC 0x0800
+#define HUB_IP_RT 0x1000
+#define HUB_IP_PROF 0x2000
+#define HUB_IP_ERROR 0x4000
+#define HUB_IP_MASK 0x7c00
+
+/* PI_RT_LOCAL_CTRL mask and shift definitions */
+
+#define PRLC_USE_INT_SHFT 16
+#define PRLC_USE_INT_MASK (UINT64_CAST 1 << 16)
+#define PRLC_USE_INT (UINT64_CAST 1 << 16)
+#define PRLC_GCLK_SHFT 15
+#define PRLC_GCLK_MASK (UINT64_CAST 1 << 15)
+#define PRLC_GCLK (UINT64_CAST 1 << 15)
+#define PRLC_GCLK_COUNT_SHFT 8
+#define PRLC_GCLK_COUNT_MASK (UINT64_CAST 0x7f << 8)
+#define PRLC_MAX_COUNT_SHFT 1
+#define PRLC_MAX_COUNT_MASK (UINT64_CAST 0x7f << 1)
+#define PRLC_GCLK_EN_SHFT 0
+#define PRLC_GCLK_EN_MASK (UINT64_CAST 1)
+#define PRLC_GCLK_EN (UINT64_CAST 1)
+
+/* PI_RT_FILTER_CTRL mask and shift definitions */
+
+/*
+ * Bits for NACK_CNT_A/B and NACK_CMP
+ */
+#define PI_NACK_CNT_EN_SHFT 20
+#define PI_NACK_CNT_EN_MASK 0x100000
+#define PI_NACK_CNT_MASK 0x0fffff
+#define PI_NACK_CNT_MAX 0x0fffff
+
+#endif /* _ASM_SN_SN0_HUBPI_H */
diff --git a/arch/mips/include/asm/sn/sn0/ip27.h b/arch/mips/include/asm/sn/sn0/ip27.h
new file mode 100644
index 00000000000..3c97e0855c8
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/ip27.h
@@ -0,0 +1,85 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/IP27.h>.
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999, 2006 by Ralf Baechle
+ */
+#ifndef _ASM_SN_SN0_IP27_H
+#define _ASM_SN_SN0_IP27_H
+
+#include <asm/mipsregs.h>
+
+/*
+ * Simple definitions for the masks which remove SW bits from pte.
+ */
+
+#define TLBLO_HWBITSHIFT 0 /* Shift value, for masking */
+
+#ifndef __ASSEMBLY__
+
+#define CAUSE_BERRINTR IE_IRQ5
+
+#define ECCF_CACHE_ERR 0
+#define ECCF_TAGLO 1
+#define ECCF_ECC 2
+#define ECCF_ERROREPC 3
+#define ECCF_PADDR 4
+#define ECCF_SIZE (5 * sizeof(long))
+
+#endif /* !__ASSEMBLY__ */
+
+#ifdef __ASSEMBLY__
+
+/*
+ * KL_GET_CPUNUM (similar to EV_GET_SPNUM for EVEREST platform) reads
+ * the processor number of the calling processor. The proc parameters
+ * must be a register.
+ */
+#define KL_GET_CPUNUM(proc) \
+ dli proc, LOCAL_HUB(0); \
+ ld proc, PI_CPU_NUM(proc)
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * R10000 status register interrupt bit mask usage for IP27.
+ */
+#define SRB_SWTIMO IE_SW0 /* 0x0100 */
+#define SRB_NET IE_SW1 /* 0x0200 */
+#define SRB_DEV0 IE_IRQ0 /* 0x0400 */
+#define SRB_DEV1 IE_IRQ1 /* 0x0800 */
+#define SRB_TIMOCLK IE_IRQ2 /* 0x1000 */
+#define SRB_PROFCLK IE_IRQ3 /* 0x2000 */
+#define SRB_ERR IE_IRQ4 /* 0x4000 */
+#define SRB_SCHEDCLK IE_IRQ5 /* 0x8000 */
+
+#define SR_IBIT_HI SRB_DEV0
+#define SR_IBIT_PROF SRB_PROFCLK
+
+#define SRB_SWTIMO_IDX 0
+#define SRB_NET_IDX 1
+#define SRB_DEV0_IDX 2
+#define SRB_DEV1_IDX 3
+#define SRB_TIMOCLK_IDX 4
+#define SRB_PROFCLK_IDX 5
+#define SRB_ERR_IDX 6
+#define SRB_SCHEDCLK_IDX 7
+
+#define NUM_CAUSE_INTRS 8
+
+#define SCACHE_LINESIZE 128
+#define SCACHE_LINEMASK (SCACHE_LINESIZE - 1)
+
+#include <asm/sn/addrs.h>
+
+#define LED_CYCLE_MASK 0x0f
+#define LED_CYCLE_SHFT 4
+
+#define SEND_NMI(_nasid, _slice) \
+ REMOTE_HUB_S((_nasid), (PI_NMI_A + ((_slice) * PI_NMI_OFFSET)), 1)
+
+#endif /* _ASM_SN_SN0_IP27_H */
diff --git a/arch/mips/include/asm/sn/sn_private.h b/arch/mips/include/asm/sn/sn_private.h
new file mode 100644
index 00000000000..1a2c3025bf2
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn_private.h
@@ -0,0 +1,19 @@
+#ifndef __ASM_SN_SN_PRIVATE_H
+#define __ASM_SN_SN_PRIVATE_H
+
+#include <asm/sn/types.h>
+
+extern nasid_t master_nasid;
+
+extern void cpu_node_probe(void);
+extern cnodeid_t get_compact_nodeid(void);
+extern void hub_rtc_init(cnodeid_t);
+extern void cpu_time_init(void);
+extern void per_cpu_init(void);
+extern void install_cpu_nmi_handler(int slice);
+extern void install_ipi(void);
+extern void setup_replication_mask(void);
+extern void replicate_kernel_text(void);
+extern pfn_t node_getfirstfree(cnodeid_t);
+
+#endif /* __ASM_SN_SN_PRIVATE_H */
diff --git a/arch/mips/include/asm/sn/types.h b/arch/mips/include/asm/sn/types.h
new file mode 100644
index 00000000000..74d0bb260b8
--- /dev/null
+++ b/arch/mips/include/asm/sn/types.h
@@ -0,0 +1,26 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_SN_TYPES_H
+#define _ASM_SN_TYPES_H
+
+#include <linux/types.h>
+
+typedef unsigned long cpuid_t;
+typedef unsigned long cnodemask_t;
+typedef signed short nasid_t; /* node id in numa-as-id space */
+typedef signed short cnodeid_t; /* node id in compact-id space */
+typedef signed char partid_t; /* partition ID type */
+typedef signed short moduleid_t; /* user-visible module number type */
+typedef signed short cmoduleid_t; /* kernel compact module id type */
+typedef unsigned char clusterid_t; /* Clusterid of the cell */
+typedef unsigned long pfn_t;
+
+typedef dev_t vertex_hdl_t; /* hardware graph vertex handle */
+
+#endif /* _ASM_SN_TYPES_H */
diff --git a/arch/mips/include/asm/sni.h b/arch/mips/include/asm/sni.h
new file mode 100644
index 00000000000..8c1eb02c6d1
--- /dev/null
+++ b/arch/mips/include/asm/sni.h
@@ -0,0 +1,244 @@
+/*
+ * SNI specific definitions
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997, 1998 by Ralf Baechle
+ * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
+ */
+#ifndef __ASM_SNI_H
+#define __ASM_SNI_H
+
+extern unsigned int sni_brd_type;
+
+#define SNI_BRD_10 2
+#define SNI_BRD_10NEW 3
+#define SNI_BRD_TOWER_OASIC 4
+#define SNI_BRD_MINITOWER 5
+#define SNI_BRD_PCI_TOWER 6
+#define SNI_BRD_RM200 7
+#define SNI_BRD_PCI_MTOWER 8
+#define SNI_BRD_PCI_DESKTOP 9
+#define SNI_BRD_PCI_TOWER_CPLUS 10
+#define SNI_BRD_PCI_MTOWER_CPLUS 11
+
+/* RM400 cpu types */
+#define SNI_CPU_M8021 0x01
+#define SNI_CPU_M8030 0x04
+#define SNI_CPU_M8031 0x06
+#define SNI_CPU_M8034 0x0f
+#define SNI_CPU_M8037 0x07
+#define SNI_CPU_M8040 0x05
+#define SNI_CPU_M8043 0x09
+#define SNI_CPU_M8050 0x0b
+#define SNI_CPU_M8053 0x0d
+
+#define SNI_PORT_BASE CKSEG1ADDR(0xb4000000)
+
+#ifndef __MIPSEL__
+/*
+ * ASIC PCI registers for big endian configuration.
+ */
+#define PCIMT_UCONF CKSEG1ADDR(0xbfff0004)
+#define PCIMT_IOADTIMEOUT2 CKSEG1ADDR(0xbfff000c)
+#define PCIMT_IOMEMCONF CKSEG1ADDR(0xbfff0014)
+#define PCIMT_IOMMU CKSEG1ADDR(0xbfff001c)
+#define PCIMT_IOADTIMEOUT1 CKSEG1ADDR(0xbfff0024)
+#define PCIMT_DMAACCESS CKSEG1ADDR(0xbfff002c)
+#define PCIMT_DMAHIT CKSEG1ADDR(0xbfff0034)
+#define PCIMT_ERRSTATUS CKSEG1ADDR(0xbfff003c)
+#define PCIMT_ERRADDR CKSEG1ADDR(0xbfff0044)
+#define PCIMT_SYNDROME CKSEG1ADDR(0xbfff004c)
+#define PCIMT_ITPEND CKSEG1ADDR(0xbfff0054)
+#define IT_INT2 0x01
+#define IT_INTD 0x02
+#define IT_INTC 0x04
+#define IT_INTB 0x08
+#define IT_INTA 0x10
+#define IT_EISA 0x20
+#define IT_SCSI 0x40
+#define IT_ETH 0x80
+#define PCIMT_IRQSEL CKSEG1ADDR(0xbfff005c)
+#define PCIMT_TESTMEM CKSEG1ADDR(0xbfff0064)
+#define PCIMT_ECCREG CKSEG1ADDR(0xbfff006c)
+#define PCIMT_CONFIG_ADDRESS CKSEG1ADDR(0xbfff0074)
+#define PCIMT_ASIC_ID CKSEG1ADDR(0xbfff007c) /* read */
+#define PCIMT_SOFT_RESET CKSEG1ADDR(0xbfff007c) /* write */
+#define PCIMT_PIA_OE CKSEG1ADDR(0xbfff0084)
+#define PCIMT_PIA_DATAOUT CKSEG1ADDR(0xbfff008c)
+#define PCIMT_PIA_DATAIN CKSEG1ADDR(0xbfff0094)
+#define PCIMT_CACHECONF CKSEG1ADDR(0xbfff009c)
+#define PCIMT_INVSPACE CKSEG1ADDR(0xbfff00a4)
+#else
+/*
+ * ASIC PCI registers for little endian configuration.
+ */
+#define PCIMT_UCONF CKSEG1ADDR(0xbfff0000)
+#define PCIMT_IOADTIMEOUT2 CKSEG1ADDR(0xbfff0008)
+#define PCIMT_IOMEMCONF CKSEG1ADDR(0xbfff0010)
+#define PCIMT_IOMMU CKSEG1ADDR(0xbfff0018)
+#define PCIMT_IOADTIMEOUT1 CKSEG1ADDR(0xbfff0020)
+#define PCIMT_DMAACCESS CKSEG1ADDR(0xbfff0028)
+#define PCIMT_DMAHIT CKSEG1ADDR(0xbfff0030)
+#define PCIMT_ERRSTATUS CKSEG1ADDR(0xbfff0038)
+#define PCIMT_ERRADDR CKSEG1ADDR(0xbfff0040)
+#define PCIMT_SYNDROME CKSEG1ADDR(0xbfff0048)
+#define PCIMT_ITPEND CKSEG1ADDR(0xbfff0050)
+#define IT_INT2 0x01
+#define IT_INTD 0x02
+#define IT_INTC 0x04
+#define IT_INTB 0x08
+#define IT_INTA 0x10
+#define IT_EISA 0x20
+#define IT_SCSI 0x40
+#define IT_ETH 0x80
+#define PCIMT_IRQSEL CKSEG1ADDR(0xbfff0058)
+#define PCIMT_TESTMEM CKSEG1ADDR(0xbfff0060)
+#define PCIMT_ECCREG CKSEG1ADDR(0xbfff0068)
+#define PCIMT_CONFIG_ADDRESS CKSEG1ADDR(0xbfff0070)
+#define PCIMT_ASIC_ID CKSEG1ADDR(0xbfff0078) /* read */
+#define PCIMT_SOFT_RESET CKSEG1ADDR(0xbfff0078) /* write */
+#define PCIMT_PIA_OE CKSEG1ADDR(0xbfff0080)
+#define PCIMT_PIA_DATAOUT CKSEG1ADDR(0xbfff0088)
+#define PCIMT_PIA_DATAIN CKSEG1ADDR(0xbfff0090)
+#define PCIMT_CACHECONF CKSEG1ADDR(0xbfff0098)
+#define PCIMT_INVSPACE CKSEG1ADDR(0xbfff00a0)
+#endif
+
+#define PCIMT_PCI_CONF CKSEG1ADDR(0xbfff0100)
+
+/*
+ * Data port for the PCI bus in IO space
+ */
+#define PCIMT_CONFIG_DATA 0x0cfc
+
+/*
+ * Board specific registers
+ */
+#define PCIMT_CSMSR CKSEG1ADDR(0xbfd00000)
+#define PCIMT_CSSWITCH CKSEG1ADDR(0xbfd10000)
+#define PCIMT_CSITPEND CKSEG1ADDR(0xbfd20000)
+#define PCIMT_AUTO_PO_EN CKSEG1ADDR(0xbfd30000)
+#define PCIMT_CLR_TEMP CKSEG1ADDR(0xbfd40000)
+#define PCIMT_AUTO_PO_DIS CKSEG1ADDR(0xbfd50000)
+#define PCIMT_EXMSR CKSEG1ADDR(0xbfd60000)
+#define PCIMT_UNUSED1 CKSEG1ADDR(0xbfd70000)
+#define PCIMT_CSWCSM CKSEG1ADDR(0xbfd80000)
+#define PCIMT_UNUSED2 CKSEG1ADDR(0xbfd90000)
+#define PCIMT_CSLED CKSEG1ADDR(0xbfda0000)
+#define PCIMT_CSMAPISA CKSEG1ADDR(0xbfdb0000)
+#define PCIMT_CSRSTBP CKSEG1ADDR(0xbfdc0000)
+#define PCIMT_CLRPOFF CKSEG1ADDR(0xbfdd0000)
+#define PCIMT_CSTIMER CKSEG1ADDR(0xbfde0000)
+#define PCIMT_PWDN CKSEG1ADDR(0xbfdf0000)
+
+/*
+ * A20R based boards
+ */
+#define A20R_PT_CLOCK_BASE CKSEG1ADDR(0xbc040000)
+#define A20R_PT_TIM0_ACK CKSEG1ADDR(0xbc050000)
+#define A20R_PT_TIM1_ACK CKSEG1ADDR(0xbc060000)
+
+#define SNI_A20R_IRQ_BASE MIPS_CPU_IRQ_BASE
+#define SNI_A20R_IRQ_TIMER (SNI_A20R_IRQ_BASE+5)
+
+#define SNI_PCIT_INT_REG CKSEG1ADDR(0xbfff000c)
+
+#define SNI_PCIT_INT_START 24
+#define SNI_PCIT_INT_END 30
+
+#define PCIT_IRQ_ETHERNET (MIPS_CPU_IRQ_BASE + 5)
+#define PCIT_IRQ_INTA (SNI_PCIT_INT_START + 0)
+#define PCIT_IRQ_INTB (SNI_PCIT_INT_START + 1)
+#define PCIT_IRQ_INTC (SNI_PCIT_INT_START + 2)
+#define PCIT_IRQ_INTD (SNI_PCIT_INT_START + 3)
+#define PCIT_IRQ_SCSI0 (SNI_PCIT_INT_START + 4)
+#define PCIT_IRQ_SCSI1 (SNI_PCIT_INT_START + 5)
+
+
+/*
+ * Interrupt 0-16 are EISA interrupts. Interrupts from 16 on are assigned
+ * to the other interrupts generated by ASIC PCI.
+ *
+ * INT2 is a wired-or of the push button interrupt, high temperature interrupt
+ * ASIC PCI interrupt.
+ */
+#define PCIMT_KEYBOARD_IRQ 1
+#define PCIMT_IRQ_INT2 24
+#define PCIMT_IRQ_INTD 25
+#define PCIMT_IRQ_INTC 26
+#define PCIMT_IRQ_INTB 27
+#define PCIMT_IRQ_INTA 28
+#define PCIMT_IRQ_EISA 29
+#define PCIMT_IRQ_SCSI 30
+
+#define PCIMT_IRQ_ETHERNET (MIPS_CPU_IRQ_BASE+6)
+
+#if 0
+#define PCIMT_IRQ_TEMPERATURE 24
+#define PCIMT_IRQ_EISA_NMI 25
+#define PCIMT_IRQ_POWER_OFF 26
+#define PCIMT_IRQ_BUTTON 27
+#endif
+
+/*
+ * Base address for the mapped 16mb EISA bus segment.
+ */
+#define PCIMT_EISA_BASE CKSEG1ADDR(0xb0000000)
+
+/* PCI EISA Interrupt acknowledge */
+#define PCIMT_INT_ACKNOWLEDGE CKSEG1ADDR(0xba000000)
+
+/*
+ * SNI ID PROM
+ *
+ * SNI_IDPROM_MEMSIZE Memsize in 16MB quantities
+ * SNI_IDPROM_BRDTYPE Board Type
+ * SNI_IDPROM_CPUTYPE CPU Type on RM400
+ */
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define __SNI_END 0
+#endif
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+#define __SNI_END 3
+#endif
+#define SNI_IDPROM_BASE CKSEG1ADDR(0x1ff00000)
+#define SNI_IDPROM_MEMSIZE (SNI_IDPROM_BASE + (0x28 ^ __SNI_END))
+#define SNI_IDPROM_BRDTYPE (SNI_IDPROM_BASE + (0x29 ^ __SNI_END))
+#define SNI_IDPROM_CPUTYPE (SNI_IDPROM_BASE + (0x30 ^ __SNI_END))
+
+#define SNI_IDPROM_SIZE 0x1000
+
+/* board specific init functions */
+extern void sni_a20r_init(void);
+extern void sni_pcit_init(void);
+extern void sni_rm200_init(void);
+extern void sni_pcimt_init(void);
+
+/* board specific irq init functions */
+extern void sni_a20r_irq_init(void);
+extern void sni_pcit_irq_init(void);
+extern void sni_pcit_cplus_irq_init(void);
+extern void sni_rm200_irq_init(void);
+extern void sni_pcimt_irq_init(void);
+
+/* timer inits */
+extern void sni_cpu_time_init(void);
+
+/* eisa init for RM200/400 */
+#ifdef CONFIG_EISA
+extern int sni_eisa_root_init(void);
+#else
+static inline int sni_eisa_root_init(void)
+{
+ return 0;
+}
+#endif
+
+/* common irq stuff */
+extern void (*sni_hwint)(void);
+extern struct irqaction sni_isa_irq;
+
+#endif /* __ASM_SNI_H */
diff --git a/arch/mips/include/asm/socket.h b/arch/mips/include/asm/socket.h
new file mode 100644
index 00000000000..facc2d7a87c
--- /dev/null
+++ b/arch/mips/include/asm/socket.h
@@ -0,0 +1,117 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997, 1999, 2000, 2001 Ralf Baechle
+ * Copyright (C) 2000, 2001 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/*
+ * For setsockopt(2)
+ *
+ * This defines are ABI conformant as far as Linux supports these ...
+ */
+#define SOL_SOCKET 0xffff
+
+#define SO_DEBUG 0x0001 /* Record debugging information. */
+#define SO_REUSEADDR 0x0004 /* Allow reuse of local addresses. */
+#define SO_KEEPALIVE 0x0008 /* Keep connections alive and send
+ SIGPIPE when they die. */
+#define SO_DONTROUTE 0x0010 /* Don't do local routing. */
+#define SO_BROADCAST 0x0020 /* Allow transmission of
+ broadcast messages. */
+#define SO_LINGER 0x0080 /* Block on close of a reliable
+ socket to transmit pending data. */
+#define SO_OOBINLINE 0x0100 /* Receive out-of-band data in-band. */
+#if 0
+To add: #define SO_REUSEPORT 0x0200 /* Allow local address and port reuse. */
+#endif
+
+#define SO_TYPE 0x1008 /* Compatible name for SO_STYLE. */
+#define SO_STYLE SO_TYPE /* Synonym */
+#define SO_ERROR 0x1007 /* get error status and clear */
+#define SO_SNDBUF 0x1001 /* Send buffer size. */
+#define SO_RCVBUF 0x1002 /* Receive buffer. */
+#define SO_SNDLOWAT 0x1003 /* send low-water mark */
+#define SO_RCVLOWAT 0x1004 /* receive low-water mark */
+#define SO_SNDTIMEO 0x1005 /* send timeout */
+#define SO_RCVTIMEO 0x1006 /* receive timeout */
+#define SO_ACCEPTCONN 0x1009
+
+/* linux-specific, might as well be the same as on i386 */
+#define SO_NO_CHECK 11
+#define SO_PRIORITY 12
+#define SO_BSDCOMPAT 14
+
+#define SO_PASSCRED 17
+#define SO_PEERCRED 18
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION 22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT 23
+#define SO_SECURITY_ENCRYPTION_NETWORK 24
+
+#define SO_BINDTODEVICE 25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER 26
+#define SO_DETACH_FILTER 27
+
+#define SO_PEERNAME 28
+#define SO_TIMESTAMP 29
+#define SCM_TIMESTAMP SO_TIMESTAMP
+
+#define SO_PEERSEC 30
+#define SO_SNDBUFFORCE 31
+#define SO_RCVBUFFORCE 33
+#define SO_PASSSEC 34
+#define SO_TIMESTAMPNS 35
+#define SCM_TIMESTAMPNS SO_TIMESTAMPNS
+
+#define SO_MARK 36
+
+#ifdef __KERNEL__
+
+/** sock_type - Socket types
+ *
+ * Please notice that for binary compat reasons MIPS has to
+ * override the enum sock_type in include/linux/net.h, so
+ * we define ARCH_HAS_SOCKET_TYPES here.
+ *
+ * @SOCK_DGRAM - datagram (conn.less) socket
+ * @SOCK_STREAM - stream (connection) socket
+ * @SOCK_RAW - raw socket
+ * @SOCK_RDM - reliably-delivered message
+ * @SOCK_SEQPACKET - sequential packet socket
+ * @SOCK_PACKET - linux specific way of getting packets at the dev level.
+ * For writing rarp and other similar things on the user level.
+ */
+enum sock_type {
+ SOCK_DGRAM = 1,
+ SOCK_STREAM = 2,
+ SOCK_RAW = 3,
+ SOCK_RDM = 4,
+ SOCK_SEQPACKET = 5,
+ SOCK_DCCP = 6,
+ SOCK_PACKET = 10,
+};
+
+#define SOCK_MAX (SOCK_PACKET + 1)
+/* Mask which covers at least up to SOCK_MASK-1. The
+ * * remaining bits are used as flags. */
+#define SOCK_TYPE_MASK 0xf
+
+/* Flags for socket, socketpair, paccept */
+#define SOCK_CLOEXEC O_CLOEXEC
+#define SOCK_NONBLOCK O_NONBLOCK
+
+#define ARCH_HAS_SOCKET_TYPES 1
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_SOCKET_H */
diff --git a/arch/mips/include/asm/sockios.h b/arch/mips/include/asm/sockios.h
new file mode 100644
index 00000000000..ed1a5f78d22
--- /dev/null
+++ b/arch/mips/include/asm/sockios.h
@@ -0,0 +1,26 @@
+/*
+ * Socket-level I/O control calls.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995 by Ralf Baechle
+ */
+#ifndef _ASM_SOCKIOS_H
+#define _ASM_SOCKIOS_H
+
+#include <asm/ioctl.h>
+
+/* Socket-level I/O control calls. */
+#define FIOGETOWN _IOR('f', 123, int)
+#define FIOSETOWN _IOW('f', 124, int)
+
+#define SIOCATMARK _IOR('s', 7, int)
+#define SIOCSPGRP _IOW('s', 8, pid_t)
+#define SIOCGPGRP _IOR('s', 9, pid_t)
+
+#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */
+#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */
+
+#endif /* _ASM_SOCKIOS_H */
diff --git a/arch/mips/include/asm/sparsemem.h b/arch/mips/include/asm/sparsemem.h
new file mode 100644
index 00000000000..795ac6c2320
--- /dev/null
+++ b/arch/mips/include/asm/sparsemem.h
@@ -0,0 +1,14 @@
+#ifndef _MIPS_SPARSEMEM_H
+#define _MIPS_SPARSEMEM_H
+#ifdef CONFIG_SPARSEMEM
+
+/*
+ * SECTION_SIZE_BITS 2^N: how big each section will be
+ * MAX_PHYSMEM_BITS 2^N: how much memory we can have in that space
+ */
+#define SECTION_SIZE_BITS 28
+#define MAX_PHYSMEM_BITS 35
+
+#endif /* CONFIG_SPARSEMEM */
+#endif /* _MIPS_SPARSEMEM_H */
+
diff --git a/arch/mips/include/asm/spinlock.h b/arch/mips/include/asm/spinlock.h
new file mode 100644
index 00000000000..1a1f320c30d
--- /dev/null
+++ b/arch/mips/include/asm/spinlock.h
@@ -0,0 +1,487 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999, 2000, 06 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_SPINLOCK_H
+#define _ASM_SPINLOCK_H
+
+#include <linux/compiler.h>
+
+#include <asm/barrier.h>
+#include <asm/war.h>
+
+/*
+ * Your basic SMP spinlocks, allowing only a single CPU anywhere
+ *
+ * Simple spin lock operations. There are two variants, one clears IRQ's
+ * on the local processor, one does not.
+ *
+ * These are fair FIFO ticket locks
+ *
+ * (the type definitions are in asm/spinlock_types.h)
+ */
+
+
+/*
+ * Ticket locks are conceptually two parts, one indicating the current head of
+ * the queue, and the other indicating the current tail. The lock is acquired
+ * by atomically noting the tail and incrementing it by one (thus adding
+ * ourself to the queue and noting our position), then waiting until the head
+ * becomes equal to the the initial value of the tail.
+ */
+
+static inline int __raw_spin_is_locked(raw_spinlock_t *lock)
+{
+ unsigned int counters = ACCESS_ONCE(lock->lock);
+
+ return ((counters >> 14) ^ counters) & 0x1fff;
+}
+
+#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
+#define __raw_spin_unlock_wait(x) \
+ while (__raw_spin_is_locked(x)) { cpu_relax(); }
+
+static inline int __raw_spin_is_contended(raw_spinlock_t *lock)
+{
+ unsigned int counters = ACCESS_ONCE(lock->lock);
+
+ return (((counters >> 14) - counters) & 0x1fff) > 1;
+}
+
+static inline void __raw_spin_lock(raw_spinlock_t *lock)
+{
+ int my_ticket;
+ int tmp;
+
+ if (R10000_LLSC_WAR) {
+ __asm__ __volatile__ (
+ " .set push # __raw_spin_lock \n"
+ " .set noreorder \n"
+ " \n"
+ "1: ll %[ticket], %[ticket_ptr] \n"
+ " addiu %[my_ticket], %[ticket], 0x4000 \n"
+ " sc %[my_ticket], %[ticket_ptr] \n"
+ " beqzl %[my_ticket], 1b \n"
+ " nop \n"
+ " srl %[my_ticket], %[ticket], 14 \n"
+ " andi %[my_ticket], %[my_ticket], 0x1fff \n"
+ " andi %[ticket], %[ticket], 0x1fff \n"
+ " bne %[ticket], %[my_ticket], 4f \n"
+ " subu %[ticket], %[my_ticket], %[ticket] \n"
+ "2: \n"
+ " .subsection 2 \n"
+ "4: andi %[ticket], %[ticket], 0x1fff \n"
+ "5: sll %[ticket], 5 \n"
+ " \n"
+ "6: bnez %[ticket], 6b \n"
+ " subu %[ticket], 1 \n"
+ " \n"
+ " lw %[ticket], %[ticket_ptr] \n"
+ " andi %[ticket], %[ticket], 0x1fff \n"
+ " beq %[ticket], %[my_ticket], 2b \n"
+ " subu %[ticket], %[my_ticket], %[ticket] \n"
+ " b 5b \n"
+ " subu %[ticket], %[ticket], 1 \n"
+ " .previous \n"
+ " .set pop \n"
+ : [ticket_ptr] "+m" (lock->lock),
+ [ticket] "=&r" (tmp),
+ [my_ticket] "=&r" (my_ticket));
+ } else {
+ __asm__ __volatile__ (
+ " .set push # __raw_spin_lock \n"
+ " .set noreorder \n"
+ " \n"
+ " ll %[ticket], %[ticket_ptr] \n"
+ "1: addiu %[my_ticket], %[ticket], 0x4000 \n"
+ " sc %[my_ticket], %[ticket_ptr] \n"
+ " beqz %[my_ticket], 3f \n"
+ " nop \n"
+ " srl %[my_ticket], %[ticket], 14 \n"
+ " andi %[my_ticket], %[my_ticket], 0x1fff \n"
+ " andi %[ticket], %[ticket], 0x1fff \n"
+ " bne %[ticket], %[my_ticket], 4f \n"
+ " subu %[ticket], %[my_ticket], %[ticket] \n"
+ "2: \n"
+ " .subsection 2 \n"
+ "3: b 1b \n"
+ " ll %[ticket], %[ticket_ptr] \n"
+ " \n"
+ "4: andi %[ticket], %[ticket], 0x1fff \n"
+ "5: sll %[ticket], 5 \n"
+ " \n"
+ "6: bnez %[ticket], 6b \n"
+ " subu %[ticket], 1 \n"
+ " \n"
+ " lw %[ticket], %[ticket_ptr] \n"
+ " andi %[ticket], %[ticket], 0x1fff \n"
+ " beq %[ticket], %[my_ticket], 2b \n"
+ " subu %[ticket], %[my_ticket], %[ticket] \n"
+ " b 5b \n"
+ " subu %[ticket], %[ticket], 1 \n"
+ " .previous \n"
+ " .set pop \n"
+ : [ticket_ptr] "+m" (lock->lock),
+ [ticket] "=&r" (tmp),
+ [my_ticket] "=&r" (my_ticket));
+ }
+
+ smp_llsc_mb();
+}
+
+static inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+ int tmp;
+
+ smp_llsc_mb();
+
+ if (R10000_LLSC_WAR) {
+ __asm__ __volatile__ (
+ " # __raw_spin_unlock \n"
+ "1: ll %[ticket], %[ticket_ptr] \n"
+ " addiu %[ticket], %[ticket], 1 \n"
+ " ori %[ticket], %[ticket], 0x2000 \n"
+ " xori %[ticket], %[ticket], 0x2000 \n"
+ " sc %[ticket], %[ticket_ptr] \n"
+ " beqzl %[ticket], 1b \n"
+ : [ticket_ptr] "+m" (lock->lock),
+ [ticket] "=&r" (tmp));
+ } else {
+ __asm__ __volatile__ (
+ " .set push # __raw_spin_unlock \n"
+ " .set noreorder \n"
+ " \n"
+ " ll %[ticket], %[ticket_ptr] \n"
+ "1: addiu %[ticket], %[ticket], 1 \n"
+ " ori %[ticket], %[ticket], 0x2000 \n"
+ " xori %[ticket], %[ticket], 0x2000 \n"
+ " sc %[ticket], %[ticket_ptr] \n"
+ " beqz %[ticket], 2f \n"
+ " nop \n"
+ " \n"
+ " .subsection 2 \n"
+ "2: b 1b \n"
+ " ll %[ticket], %[ticket_ptr] \n"
+ " .previous \n"
+ " .set pop \n"
+ : [ticket_ptr] "+m" (lock->lock),
+ [ticket] "=&r" (tmp));
+ }
+}
+
+static inline unsigned int __raw_spin_trylock(raw_spinlock_t *lock)
+{
+ int tmp, tmp2, tmp3;
+
+ if (R10000_LLSC_WAR) {
+ __asm__ __volatile__ (
+ " .set push # __raw_spin_trylock \n"
+ " .set noreorder \n"
+ " \n"
+ "1: ll %[ticket], %[ticket_ptr] \n"
+ " srl %[my_ticket], %[ticket], 14 \n"
+ " andi %[my_ticket], %[my_ticket], 0x1fff \n"
+ " andi %[now_serving], %[ticket], 0x1fff \n"
+ " bne %[my_ticket], %[now_serving], 3f \n"
+ " addiu %[ticket], %[ticket], 0x4000 \n"
+ " sc %[ticket], %[ticket_ptr] \n"
+ " beqzl %[ticket], 1b \n"
+ " li %[ticket], 1 \n"
+ "2: \n"
+ " .subsection 2 \n"
+ "3: b 2b \n"
+ " li %[ticket], 0 \n"
+ " .previous \n"
+ " .set pop \n"
+ : [ticket_ptr] "+m" (lock->lock),
+ [ticket] "=&r" (tmp),
+ [my_ticket] "=&r" (tmp2),
+ [now_serving] "=&r" (tmp3));
+ } else {
+ __asm__ __volatile__ (
+ " .set push # __raw_spin_trylock \n"
+ " .set noreorder \n"
+ " \n"
+ " ll %[ticket], %[ticket_ptr] \n"
+ "1: srl %[my_ticket], %[ticket], 14 \n"
+ " andi %[my_ticket], %[my_ticket], 0x1fff \n"
+ " andi %[now_serving], %[ticket], 0x1fff \n"
+ " bne %[my_ticket], %[now_serving], 3f \n"
+ " addiu %[ticket], %[ticket], 0x4000 \n"
+ " sc %[ticket], %[ticket_ptr] \n"
+ " beqz %[ticket], 4f \n"
+ " li %[ticket], 1 \n"
+ "2: \n"
+ " .subsection 2 \n"
+ "3: b 2b \n"
+ " li %[ticket], 0 \n"
+ "4: b 1b \n"
+ " ll %[ticket], %[ticket_ptr] \n"
+ " .previous \n"
+ " .set pop \n"
+ : [ticket_ptr] "+m" (lock->lock),
+ [ticket] "=&r" (tmp),
+ [my_ticket] "=&r" (tmp2),
+ [now_serving] "=&r" (tmp3));
+ }
+
+ smp_llsc_mb();
+
+ return tmp;
+}
+
+/*
+ * Read-write spinlocks, allowing multiple readers but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts but no interrupt
+ * writers. For those circumstances we can "mix" irq-safe locks - any writer
+ * needs to get a irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ */
+
+/*
+ * read_can_lock - would read_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define __raw_read_can_lock(rw) ((rw)->lock >= 0)
+
+/*
+ * write_can_lock - would write_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define __raw_write_can_lock(rw) (!(rw)->lock)
+
+static inline void __raw_read_lock(raw_rwlock_t *rw)
+{
+ unsigned int tmp;
+
+ if (R10000_LLSC_WAR) {
+ __asm__ __volatile__(
+ " .set noreorder # __raw_read_lock \n"
+ "1: ll %1, %2 \n"
+ " bltz %1, 1b \n"
+ " addu %1, 1 \n"
+ " sc %1, %0 \n"
+ " beqzl %1, 1b \n"
+ " nop \n"
+ " .set reorder \n"
+ : "=m" (rw->lock), "=&r" (tmp)
+ : "m" (rw->lock)
+ : "memory");
+ } else {
+ __asm__ __volatile__(
+ " .set noreorder # __raw_read_lock \n"
+ "1: ll %1, %2 \n"
+ " bltz %1, 2f \n"
+ " addu %1, 1 \n"
+ " sc %1, %0 \n"
+ " beqz %1, 1b \n"
+ " nop \n"
+ " .subsection 2 \n"
+ "2: ll %1, %2 \n"
+ " bltz %1, 2b \n"
+ " addu %1, 1 \n"
+ " b 1b \n"
+ " nop \n"
+ " .previous \n"
+ " .set reorder \n"
+ : "=m" (rw->lock), "=&r" (tmp)
+ : "m" (rw->lock)
+ : "memory");
+ }
+
+ smp_llsc_mb();
+}
+
+/* Note the use of sub, not subu which will make the kernel die with an
+ overflow exception if we ever try to unlock an rwlock that is already
+ unlocked or is being held by a writer. */
+static inline void __raw_read_unlock(raw_rwlock_t *rw)
+{
+ unsigned int tmp;
+
+ smp_llsc_mb();
+
+ if (R10000_LLSC_WAR) {
+ __asm__ __volatile__(
+ "1: ll %1, %2 # __raw_read_unlock \n"
+ " sub %1, 1 \n"
+ " sc %1, %0 \n"
+ " beqzl %1, 1b \n"
+ : "=m" (rw->lock), "=&r" (tmp)
+ : "m" (rw->lock)
+ : "memory");
+ } else {
+ __asm__ __volatile__(
+ " .set noreorder # __raw_read_unlock \n"
+ "1: ll %1, %2 \n"
+ " sub %1, 1 \n"
+ " sc %1, %0 \n"
+ " beqz %1, 2f \n"
+ " nop \n"
+ " .subsection 2 \n"
+ "2: b 1b \n"
+ " nop \n"
+ " .previous \n"
+ " .set reorder \n"
+ : "=m" (rw->lock), "=&r" (tmp)
+ : "m" (rw->lock)
+ : "memory");
+ }
+}
+
+static inline void __raw_write_lock(raw_rwlock_t *rw)
+{
+ unsigned int tmp;
+
+ if (R10000_LLSC_WAR) {
+ __asm__ __volatile__(
+ " .set noreorder # __raw_write_lock \n"
+ "1: ll %1, %2 \n"
+ " bnez %1, 1b \n"
+ " lui %1, 0x8000 \n"
+ " sc %1, %0 \n"
+ " beqzl %1, 1b \n"
+ " nop \n"
+ " .set reorder \n"
+ : "=m" (rw->lock), "=&r" (tmp)
+ : "m" (rw->lock)
+ : "memory");
+ } else {
+ __asm__ __volatile__(
+ " .set noreorder # __raw_write_lock \n"
+ "1: ll %1, %2 \n"
+ " bnez %1, 2f \n"
+ " lui %1, 0x8000 \n"
+ " sc %1, %0 \n"
+ " beqz %1, 2f \n"
+ " nop \n"
+ " .subsection 2 \n"
+ "2: ll %1, %2 \n"
+ " bnez %1, 2b \n"
+ " lui %1, 0x8000 \n"
+ " b 1b \n"
+ " nop \n"
+ " .previous \n"
+ " .set reorder \n"
+ : "=m" (rw->lock), "=&r" (tmp)
+ : "m" (rw->lock)
+ : "memory");
+ }
+
+ smp_llsc_mb();
+}
+
+static inline void __raw_write_unlock(raw_rwlock_t *rw)
+{
+ smp_mb();
+
+ __asm__ __volatile__(
+ " # __raw_write_unlock \n"
+ " sw $0, %0 \n"
+ : "=m" (rw->lock)
+ : "m" (rw->lock)
+ : "memory");
+}
+
+static inline int __raw_read_trylock(raw_rwlock_t *rw)
+{
+ unsigned int tmp;
+ int ret;
+
+ if (R10000_LLSC_WAR) {
+ __asm__ __volatile__(
+ " .set noreorder # __raw_read_trylock \n"
+ " li %2, 0 \n"
+ "1: ll %1, %3 \n"
+ " bltz %1, 2f \n"
+ " addu %1, 1 \n"
+ " sc %1, %0 \n"
+ " .set reorder \n"
+ " beqzl %1, 1b \n"
+ " nop \n"
+ __WEAK_LLSC_MB
+ " li %2, 1 \n"
+ "2: \n"
+ : "=m" (rw->lock), "=&r" (tmp), "=&r" (ret)
+ : "m" (rw->lock)
+ : "memory");
+ } else {
+ __asm__ __volatile__(
+ " .set noreorder # __raw_read_trylock \n"
+ " li %2, 0 \n"
+ "1: ll %1, %3 \n"
+ " bltz %1, 2f \n"
+ " addu %1, 1 \n"
+ " sc %1, %0 \n"
+ " beqz %1, 1b \n"
+ " nop \n"
+ " .set reorder \n"
+ __WEAK_LLSC_MB
+ " li %2, 1 \n"
+ "2: \n"
+ : "=m" (rw->lock), "=&r" (tmp), "=&r" (ret)
+ : "m" (rw->lock)
+ : "memory");
+ }
+
+ return ret;
+}
+
+static inline int __raw_write_trylock(raw_rwlock_t *rw)
+{
+ unsigned int tmp;
+ int ret;
+
+ if (R10000_LLSC_WAR) {
+ __asm__ __volatile__(
+ " .set noreorder # __raw_write_trylock \n"
+ " li %2, 0 \n"
+ "1: ll %1, %3 \n"
+ " bnez %1, 2f \n"
+ " lui %1, 0x8000 \n"
+ " sc %1, %0 \n"
+ " beqzl %1, 1b \n"
+ " nop \n"
+ __WEAK_LLSC_MB
+ " li %2, 1 \n"
+ " .set reorder \n"
+ "2: \n"
+ : "=m" (rw->lock), "=&r" (tmp), "=&r" (ret)
+ : "m" (rw->lock)
+ : "memory");
+ } else {
+ __asm__ __volatile__(
+ " .set noreorder # __raw_write_trylock \n"
+ " li %2, 0 \n"
+ "1: ll %1, %3 \n"
+ " bnez %1, 2f \n"
+ " lui %1, 0x8000 \n"
+ " sc %1, %0 \n"
+ " beqz %1, 3f \n"
+ " li %2, 1 \n"
+ "2: \n"
+ __WEAK_LLSC_MB
+ " .subsection 2 \n"
+ "3: b 1b \n"
+ " li %2, 0 \n"
+ " .previous \n"
+ " .set reorder \n"
+ : "=m" (rw->lock), "=&r" (tmp), "=&r" (ret)
+ : "m" (rw->lock)
+ : "memory");
+ }
+
+ return ret;
+}
+
+
+#define _raw_spin_relax(lock) cpu_relax()
+#define _raw_read_relax(lock) cpu_relax()
+#define _raw_write_relax(lock) cpu_relax()
+
+#endif /* _ASM_SPINLOCK_H */
diff --git a/arch/mips/include/asm/spinlock_types.h b/arch/mips/include/asm/spinlock_types.h
new file mode 100644
index 00000000000..adeedaa116c
--- /dev/null
+++ b/arch/mips/include/asm/spinlock_types.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_SPINLOCK_TYPES_H
+#define _ASM_SPINLOCK_TYPES_H
+
+#ifndef __LINUX_SPINLOCK_TYPES_H
+# error "please don't include this file directly"
+#endif
+
+typedef struct {
+ /*
+ * bits 0..13: serving_now
+ * bits 14 : junk data
+ * bits 15..28: ticket
+ */
+ unsigned int lock;
+} raw_spinlock_t;
+
+#define __RAW_SPIN_LOCK_UNLOCKED { 0 }
+
+typedef struct {
+ volatile unsigned int lock;
+} raw_rwlock_t;
+
+#define __RAW_RW_LOCK_UNLOCKED { 0 }
+
+#endif
diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h
new file mode 100644
index 00000000000..4c37c4e5f72
--- /dev/null
+++ b/arch/mips/include/asm/stackframe.h
@@ -0,0 +1,574 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 99, 2001 Ralf Baechle
+ * Copyright (C) 1994, 1995, 1996 Paul M. Antoine.
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) 2007 Maciej W. Rozycki
+ */
+#ifndef _ASM_STACKFRAME_H
+#define _ASM_STACKFRAME_H
+
+#include <linux/threads.h>
+
+#include <asm/asm.h>
+#include <asm/asmmacro.h>
+#include <asm/mipsregs.h>
+#include <asm/asm-offsets.h>
+
+/*
+ * For SMTC kernel, global IE should be left set, and interrupts
+ * controlled exclusively via IXMT.
+ */
+#ifdef CONFIG_MIPS_MT_SMTC
+#define STATMASK 0x1e
+#elif defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+#define STATMASK 0x3f
+#else
+#define STATMASK 0x1f
+#endif
+
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/mipsmtregs.h>
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+ .macro SAVE_AT
+ .set push
+ .set noat
+ LONG_S $1, PT_R1(sp)
+ .set pop
+ .endm
+
+ .macro SAVE_TEMP
+#ifdef CONFIG_CPU_HAS_SMARTMIPS
+ mflhxu v1
+ LONG_S v1, PT_LO(sp)
+ mflhxu v1
+ LONG_S v1, PT_HI(sp)
+ mflhxu v1
+ LONG_S v1, PT_ACX(sp)
+#else
+ mfhi v1
+ LONG_S v1, PT_HI(sp)
+ mflo v1
+ LONG_S v1, PT_LO(sp)
+#endif
+#ifdef CONFIG_32BIT
+ LONG_S $8, PT_R8(sp)
+ LONG_S $9, PT_R9(sp)
+#endif
+ LONG_S $10, PT_R10(sp)
+ LONG_S $11, PT_R11(sp)
+ LONG_S $12, PT_R12(sp)
+ LONG_S $13, PT_R13(sp)
+ LONG_S $14, PT_R14(sp)
+ LONG_S $15, PT_R15(sp)
+ LONG_S $24, PT_R24(sp)
+ .endm
+
+ .macro SAVE_STATIC
+ LONG_S $16, PT_R16(sp)
+ LONG_S $17, PT_R17(sp)
+ LONG_S $18, PT_R18(sp)
+ LONG_S $19, PT_R19(sp)
+ LONG_S $20, PT_R20(sp)
+ LONG_S $21, PT_R21(sp)
+ LONG_S $22, PT_R22(sp)
+ LONG_S $23, PT_R23(sp)
+ LONG_S $30, PT_R30(sp)
+ .endm
+
+#ifdef CONFIG_SMP
+#ifdef CONFIG_MIPS_MT_SMTC
+#define PTEBASE_SHIFT 19 /* TCBIND */
+#else
+#define PTEBASE_SHIFT 23 /* CONTEXT */
+#endif
+ .macro get_saved_sp /* SMP variation */
+#ifdef CONFIG_MIPS_MT_SMTC
+ mfc0 k0, CP0_TCBIND
+#else
+ MFC0 k0, CP0_CONTEXT
+#endif
+#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
+ lui k1, %hi(kernelsp)
+#else
+ lui k1, %highest(kernelsp)
+ daddiu k1, %higher(kernelsp)
+ dsll k1, 16
+ daddiu k1, %hi(kernelsp)
+ dsll k1, 16
+#endif
+ LONG_SRL k0, PTEBASE_SHIFT
+ LONG_ADDU k1, k0
+ LONG_L k1, %lo(kernelsp)(k1)
+ .endm
+
+ .macro set_saved_sp stackp temp temp2
+#ifdef CONFIG_MIPS_MT_SMTC
+ mfc0 \temp, CP0_TCBIND
+#else
+ MFC0 \temp, CP0_CONTEXT
+#endif
+ LONG_SRL \temp, PTEBASE_SHIFT
+ LONG_S \stackp, kernelsp(\temp)
+ .endm
+#else
+ .macro get_saved_sp /* Uniprocessor variation */
+#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
+ lui k1, %hi(kernelsp)
+#else
+ lui k1, %highest(kernelsp)
+ daddiu k1, %higher(kernelsp)
+ dsll k1, k1, 16
+ daddiu k1, %hi(kernelsp)
+ dsll k1, k1, 16
+#endif
+ LONG_L k1, %lo(kernelsp)(k1)
+ .endm
+
+ .macro set_saved_sp stackp temp temp2
+ LONG_S \stackp, kernelsp
+ .endm
+#endif
+
+ .macro SAVE_SOME
+ .set push
+ .set noat
+ .set reorder
+ mfc0 k0, CP0_STATUS
+ sll k0, 3 /* extract cu0 bit */
+ .set noreorder
+ bltz k0, 8f
+ move k1, sp
+ .set reorder
+ /* Called from user mode, new stack. */
+ get_saved_sp
+#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
+8: move k0, sp
+ PTR_SUBU sp, k1, PT_SIZE
+#else
+ .set at=k0
+8: PTR_SUBU k1, PT_SIZE
+ .set noat
+ move k0, sp
+ move sp, k1
+#endif
+ LONG_S k0, PT_R29(sp)
+ LONG_S $3, PT_R3(sp)
+ /*
+ * You might think that you don't need to save $0,
+ * but the FPU emulator and gdb remote debug stub
+ * need it to operate correctly
+ */
+ LONG_S $0, PT_R0(sp)
+ mfc0 v1, CP0_STATUS
+ LONG_S $2, PT_R2(sp)
+ LONG_S v1, PT_STATUS(sp)
+#ifdef CONFIG_MIPS_MT_SMTC
+ /*
+ * Ideally, these instructions would be shuffled in
+ * to cover the pipeline delay.
+ */
+ .set mips32
+ mfc0 v1, CP0_TCSTATUS
+ .set mips0
+ LONG_S v1, PT_TCSTATUS(sp)
+#endif /* CONFIG_MIPS_MT_SMTC */
+ LONG_S $4, PT_R4(sp)
+ mfc0 v1, CP0_CAUSE
+ LONG_S $5, PT_R5(sp)
+ LONG_S v1, PT_CAUSE(sp)
+ LONG_S $6, PT_R6(sp)
+ MFC0 v1, CP0_EPC
+ LONG_S $7, PT_R7(sp)
+#ifdef CONFIG_64BIT
+ LONG_S $8, PT_R8(sp)
+ LONG_S $9, PT_R9(sp)
+#endif
+ LONG_S v1, PT_EPC(sp)
+ LONG_S $25, PT_R25(sp)
+ LONG_S $28, PT_R28(sp)
+ LONG_S $31, PT_R31(sp)
+ ori $28, sp, _THREAD_MASK
+ xori $28, _THREAD_MASK
+ .set pop
+ .endm
+
+ .macro SAVE_ALL
+ SAVE_SOME
+ SAVE_AT
+ SAVE_TEMP
+ SAVE_STATIC
+ .endm
+
+ .macro RESTORE_AT
+ .set push
+ .set noat
+ LONG_L $1, PT_R1(sp)
+ .set pop
+ .endm
+
+ .macro RESTORE_TEMP
+#ifdef CONFIG_CPU_HAS_SMARTMIPS
+ LONG_L $24, PT_ACX(sp)
+ mtlhx $24
+ LONG_L $24, PT_HI(sp)
+ mtlhx $24
+ LONG_L $24, PT_LO(sp)
+ mtlhx $24
+#else
+ LONG_L $24, PT_LO(sp)
+ mtlo $24
+ LONG_L $24, PT_HI(sp)
+ mthi $24
+#endif
+#ifdef CONFIG_32BIT
+ LONG_L $8, PT_R8(sp)
+ LONG_L $9, PT_R9(sp)
+#endif
+ LONG_L $10, PT_R10(sp)
+ LONG_L $11, PT_R11(sp)
+ LONG_L $12, PT_R12(sp)
+ LONG_L $13, PT_R13(sp)
+ LONG_L $14, PT_R14(sp)
+ LONG_L $15, PT_R15(sp)
+ LONG_L $24, PT_R24(sp)
+ .endm
+
+ .macro RESTORE_STATIC
+ LONG_L $16, PT_R16(sp)
+ LONG_L $17, PT_R17(sp)
+ LONG_L $18, PT_R18(sp)
+ LONG_L $19, PT_R19(sp)
+ LONG_L $20, PT_R20(sp)
+ LONG_L $21, PT_R21(sp)
+ LONG_L $22, PT_R22(sp)
+ LONG_L $23, PT_R23(sp)
+ LONG_L $30, PT_R30(sp)
+ .endm
+
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+
+ .macro RESTORE_SOME
+ .set push
+ .set reorder
+ .set noat
+ mfc0 a0, CP0_STATUS
+ li v1, 0xff00
+ ori a0, STATMASK
+ xori a0, STATMASK
+ mtc0 a0, CP0_STATUS
+ and a0, v1
+ LONG_L v0, PT_STATUS(sp)
+ nor v1, $0, v1
+ and v0, v1
+ or v0, a0
+ mtc0 v0, CP0_STATUS
+ LONG_L $31, PT_R31(sp)
+ LONG_L $28, PT_R28(sp)
+ LONG_L $25, PT_R25(sp)
+ LONG_L $7, PT_R7(sp)
+ LONG_L $6, PT_R6(sp)
+ LONG_L $5, PT_R5(sp)
+ LONG_L $4, PT_R4(sp)
+ LONG_L $3, PT_R3(sp)
+ LONG_L $2, PT_R2(sp)
+ .set pop
+ .endm
+
+ .macro RESTORE_SP_AND_RET
+ .set push
+ .set noreorder
+ LONG_L k0, PT_EPC(sp)
+ LONG_L sp, PT_R29(sp)
+ jr k0
+ rfe
+ .set pop
+ .endm
+
+#else
+ .macro RESTORE_SOME
+ .set push
+ .set reorder
+ .set noat
+#ifdef CONFIG_MIPS_MT_SMTC
+ .set mips32r2
+ /*
+ * We need to make sure the read-modify-write
+ * of Status below isn't perturbed by an interrupt
+ * or cross-TC access, so we need to do at least a DMT,
+ * protected by an interrupt-inhibit. But setting IXMT
+ * also creates a few-cycle window where an IPI could
+ * be queued and not be detected before potentially
+ * returning to a WAIT or user-mode loop. It must be
+ * replayed.
+ *
+ * We're in the middle of a context switch, and
+ * we can't dispatch it directly without trashing
+ * some registers, so we'll try to detect this unlikely
+ * case and program a software interrupt in the VPE,
+ * as would be done for a cross-VPE IPI. To accomodate
+ * the handling of that case, we're doing a DVPE instead
+ * of just a DMT here to protect against other threads.
+ * This is a lot of cruft to cover a tiny window.
+ * If you can find a better design, implement it!
+ *
+ */
+ mfc0 v0, CP0_TCSTATUS
+ ori v0, TCSTATUS_IXMT
+ mtc0 v0, CP0_TCSTATUS
+ _ehb
+ DVPE 5 # dvpe a1
+ jal mips_ihb
+#endif /* CONFIG_MIPS_MT_SMTC */
+ mfc0 a0, CP0_STATUS
+ ori a0, STATMASK
+ xori a0, STATMASK
+ mtc0 a0, CP0_STATUS
+ li v1, 0xff00
+ and a0, v1
+ LONG_L v0, PT_STATUS(sp)
+ nor v1, $0, v1
+ and v0, v1
+ or v0, a0
+ mtc0 v0, CP0_STATUS
+#ifdef CONFIG_MIPS_MT_SMTC
+/*
+ * Only after EXL/ERL have been restored to status can we
+ * restore TCStatus.IXMT.
+ */
+ LONG_L v1, PT_TCSTATUS(sp)
+ _ehb
+ mfc0 a0, CP0_TCSTATUS
+ andi v1, TCSTATUS_IXMT
+ bnez v1, 0f
+
+/*
+ * We'd like to detect any IPIs queued in the tiny window
+ * above and request an software interrupt to service them
+ * when we ERET.
+ *
+ * Computing the offset into the IPIQ array of the executing
+ * TC's IPI queue in-line would be tedious. We use part of
+ * the TCContext register to hold 16 bits of offset that we
+ * can add in-line to find the queue head.
+ */
+ mfc0 v0, CP0_TCCONTEXT
+ la a2, IPIQ
+ srl v0, v0, 16
+ addu a2, a2, v0
+ LONG_L v0, 0(a2)
+ beqz v0, 0f
+/*
+ * If we have a queue, provoke dispatch within the VPE by setting C_SW1
+ */
+ mfc0 v0, CP0_CAUSE
+ ori v0, v0, C_SW1
+ mtc0 v0, CP0_CAUSE
+0:
+ /*
+ * This test should really never branch but
+ * let's be prudent here. Having atomized
+ * the shared register modifications, we can
+ * now EVPE, and must do so before interrupts
+ * are potentially re-enabled.
+ */
+ andi a1, a1, MVPCONTROL_EVP
+ beqz a1, 1f
+ evpe
+1:
+ /* We know that TCStatua.IXMT should be set from above */
+ xori a0, a0, TCSTATUS_IXMT
+ or a0, a0, v1
+ mtc0 a0, CP0_TCSTATUS
+ _ehb
+
+ .set mips0
+#endif /* CONFIG_MIPS_MT_SMTC */
+ LONG_L v1, PT_EPC(sp)
+ MTC0 v1, CP0_EPC
+ LONG_L $31, PT_R31(sp)
+ LONG_L $28, PT_R28(sp)
+ LONG_L $25, PT_R25(sp)
+#ifdef CONFIG_64BIT
+ LONG_L $8, PT_R8(sp)
+ LONG_L $9, PT_R9(sp)
+#endif
+ LONG_L $7, PT_R7(sp)
+ LONG_L $6, PT_R6(sp)
+ LONG_L $5, PT_R5(sp)
+ LONG_L $4, PT_R4(sp)
+ LONG_L $3, PT_R3(sp)
+ LONG_L $2, PT_R2(sp)
+ .set pop
+ .endm
+
+ .macro RESTORE_SP_AND_RET
+ LONG_L sp, PT_R29(sp)
+ .set mips3
+ eret
+ .set mips0
+ .endm
+
+#endif
+
+ .macro RESTORE_SP
+ LONG_L sp, PT_R29(sp)
+ .endm
+
+ .macro RESTORE_ALL
+ RESTORE_TEMP
+ RESTORE_STATIC
+ RESTORE_AT
+ RESTORE_SOME
+ RESTORE_SP
+ .endm
+
+ .macro RESTORE_ALL_AND_RET
+ RESTORE_TEMP
+ RESTORE_STATIC
+ RESTORE_AT
+ RESTORE_SOME
+ RESTORE_SP_AND_RET
+ .endm
+
+/*
+ * Move to kernel mode and disable interrupts.
+ * Set cp0 enable bit as sign that we're running on the kernel stack
+ */
+ .macro CLI
+#if !defined(CONFIG_MIPS_MT_SMTC)
+ mfc0 t0, CP0_STATUS
+ li t1, ST0_CU0 | STATMASK
+ or t0, t1
+ xori t0, STATMASK
+ mtc0 t0, CP0_STATUS
+#else /* CONFIG_MIPS_MT_SMTC */
+ /*
+ * For SMTC, we need to set privilege
+ * and disable interrupts only for the
+ * current TC, using the TCStatus register.
+ */
+ mfc0 t0, CP0_TCSTATUS
+ /* Fortunately CU 0 is in the same place in both registers */
+ /* Set TCU0, TMX, TKSU (for later inversion) and IXMT */
+ li t1, ST0_CU0 | 0x08001c00
+ or t0, t1
+ /* Clear TKSU, leave IXMT */
+ xori t0, 0x00001800
+ mtc0 t0, CP0_TCSTATUS
+ _ehb
+ /* We need to leave the global IE bit set, but clear EXL...*/
+ mfc0 t0, CP0_STATUS
+ ori t0, ST0_EXL | ST0_ERL
+ xori t0, ST0_EXL | ST0_ERL
+ mtc0 t0, CP0_STATUS
+#endif /* CONFIG_MIPS_MT_SMTC */
+ irq_disable_hazard
+ .endm
+
+/*
+ * Move to kernel mode and enable interrupts.
+ * Set cp0 enable bit as sign that we're running on the kernel stack
+ */
+ .macro STI
+#if !defined(CONFIG_MIPS_MT_SMTC)
+ mfc0 t0, CP0_STATUS
+ li t1, ST0_CU0 | STATMASK
+ or t0, t1
+ xori t0, STATMASK & ~1
+ mtc0 t0, CP0_STATUS
+#else /* CONFIG_MIPS_MT_SMTC */
+ /*
+ * For SMTC, we need to set privilege
+ * and enable interrupts only for the
+ * current TC, using the TCStatus register.
+ */
+ _ehb
+ mfc0 t0, CP0_TCSTATUS
+ /* Fortunately CU 0 is in the same place in both registers */
+ /* Set TCU0, TKSU (for later inversion) and IXMT */
+ li t1, ST0_CU0 | 0x08001c00
+ or t0, t1
+ /* Clear TKSU *and* IXMT */
+ xori t0, 0x00001c00
+ mtc0 t0, CP0_TCSTATUS
+ _ehb
+ /* We need to leave the global IE bit set, but clear EXL...*/
+ mfc0 t0, CP0_STATUS
+ ori t0, ST0_EXL
+ xori t0, ST0_EXL
+ mtc0 t0, CP0_STATUS
+ /* irq_enable_hazard below should expand to EHB for 24K/34K cpus */
+#endif /* CONFIG_MIPS_MT_SMTC */
+ irq_enable_hazard
+ .endm
+
+/*
+ * Just move to kernel mode and leave interrupts as they are. Note
+ * for the R3000 this means copying the previous enable from IEp.
+ * Set cp0 enable bit as sign that we're running on the kernel stack
+ */
+ .macro KMODE
+#ifdef CONFIG_MIPS_MT_SMTC
+ /*
+ * This gets baroque in SMTC. We want to
+ * protect the non-atomic clearing of EXL
+ * with DMT/EMT, but we don't want to take
+ * an interrupt while DMT is still in effect.
+ */
+
+ /* KMODE gets invoked from both reorder and noreorder code */
+ .set push
+ .set mips32r2
+ .set noreorder
+ mfc0 v0, CP0_TCSTATUS
+ andi v1, v0, TCSTATUS_IXMT
+ ori v0, TCSTATUS_IXMT
+ mtc0 v0, CP0_TCSTATUS
+ _ehb
+ DMT 2 # dmt v0
+ /*
+ * We don't know a priori if ra is "live"
+ */
+ move t0, ra
+ jal mips_ihb
+ nop /* delay slot */
+ move ra, t0
+#endif /* CONFIG_MIPS_MT_SMTC */
+ mfc0 t0, CP0_STATUS
+ li t1, ST0_CU0 | (STATMASK & ~1)
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+ andi t2, t0, ST0_IEP
+ srl t2, 2
+ or t0, t2
+#endif
+ or t0, t1
+ xori t0, STATMASK & ~1
+ mtc0 t0, CP0_STATUS
+#ifdef CONFIG_MIPS_MT_SMTC
+ _ehb
+ andi v0, v0, VPECONTROL_TE
+ beqz v0, 2f
+ nop /* delay slot */
+ emt
+2:
+ mfc0 v0, CP0_TCSTATUS
+ /* Clear IXMT, then OR in previous value */
+ ori v0, TCSTATUS_IXMT
+ xori v0, TCSTATUS_IXMT
+ or v0, v1, v0
+ mtc0 v0, CP0_TCSTATUS
+ /*
+ * irq_disable_hazard below should expand to EHB
+ * on 24K/34K CPUS
+ */
+ .set pop
+#endif /* CONFIG_MIPS_MT_SMTC */
+ irq_disable_hazard
+ .endm
+
+#endif /* _ASM_STACKFRAME_H */
diff --git a/arch/mips/include/asm/stacktrace.h b/arch/mips/include/asm/stacktrace.h
new file mode 100644
index 00000000000..0bf82818aa5
--- /dev/null
+++ b/arch/mips/include/asm/stacktrace.h
@@ -0,0 +1,48 @@
+#ifndef _ASM_STACKTRACE_H
+#define _ASM_STACKTRACE_H
+
+#include <asm/ptrace.h>
+
+#ifdef CONFIG_KALLSYMS
+extern int raw_show_trace;
+extern unsigned long unwind_stack(struct task_struct *task, unsigned long *sp,
+ unsigned long pc, unsigned long *ra);
+#else
+#define raw_show_trace 1
+static inline unsigned long unwind_stack(struct task_struct *task,
+ unsigned long *sp, unsigned long pc, unsigned long *ra)
+{
+ return 0;
+}
+#endif
+
+static __always_inline void prepare_frametrace(struct pt_regs *regs)
+{
+#ifndef CONFIG_KALLSYMS
+ /*
+ * Remove any garbage that may be in regs (specially func
+ * addresses) to avoid show_raw_backtrace() to report them
+ */
+ memset(regs, 0, sizeof(*regs));
+#endif
+ __asm__ __volatile__(
+ ".set push\n\t"
+ ".set noat\n\t"
+#ifdef CONFIG_64BIT
+ "1: dla $1, 1b\n\t"
+ "sd $1, %0\n\t"
+ "sd $29, %1\n\t"
+ "sd $31, %2\n\t"
+#else
+ "1: la $1, 1b\n\t"
+ "sw $1, %0\n\t"
+ "sw $29, %1\n\t"
+ "sw $31, %2\n\t"
+#endif
+ ".set pop\n\t"
+ : "=m" (regs->cp0_epc),
+ "=m" (regs->regs[29]), "=m" (regs->regs[31])
+ : : "memory");
+}
+
+#endif /* _ASM_STACKTRACE_H */
diff --git a/arch/mips/include/asm/stat.h b/arch/mips/include/asm/stat.h
new file mode 100644
index 00000000000..6e00f751ab6
--- /dev/null
+++ b/arch/mips/include/asm/stat.h
@@ -0,0 +1,132 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1999, 2000 Ralf Baechle
+ * Copyright (C) 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_STAT_H
+#define _ASM_STAT_H
+
+#include <linux/types.h>
+
+#include <asm/sgidefs.h>
+
+#if (_MIPS_SIM == _MIPS_SIM_ABI32) || (_MIPS_SIM == _MIPS_SIM_NABI32)
+
+struct stat {
+ unsigned st_dev;
+ long st_pad1[3]; /* Reserved for network id */
+ ino_t st_ino;
+ mode_t st_mode;
+ nlink_t st_nlink;
+ uid_t st_uid;
+ gid_t st_gid;
+ unsigned st_rdev;
+ long st_pad2[2];
+ off_t st_size;
+ long st_pad3;
+ /*
+ * Actually this should be timestruc_t st_atime, st_mtime and st_ctime
+ * but we don't have it under Linux.
+ */
+ time_t st_atime;
+ long st_atime_nsec;
+ time_t st_mtime;
+ long st_mtime_nsec;
+ time_t st_ctime;
+ long st_ctime_nsec;
+ long st_blksize;
+ long st_blocks;
+ long st_pad4[14];
+};
+
+/*
+ * This matches struct stat64 in glibc2.1, hence the absolutely insane
+ * amounts of padding around dev_t's. The memory layout is the same as of
+ * struct stat of the 64-bit kernel.
+ */
+
+struct stat64 {
+ unsigned long st_dev;
+ unsigned long st_pad0[3]; /* Reserved for st_dev expansion */
+
+ unsigned long long st_ino;
+
+ mode_t st_mode;
+ nlink_t st_nlink;
+
+ uid_t st_uid;
+ gid_t st_gid;
+
+ unsigned long st_rdev;
+ unsigned long st_pad1[3]; /* Reserved for st_rdev expansion */
+
+ long long st_size;
+
+ /*
+ * Actually this should be timestruc_t st_atime, st_mtime and st_ctime
+ * but we don't have it under Linux.
+ */
+ time_t st_atime;
+ unsigned long st_atime_nsec; /* Reserved for st_atime expansion */
+
+ time_t st_mtime;
+ unsigned long st_mtime_nsec; /* Reserved for st_mtime expansion */
+
+ time_t st_ctime;
+ unsigned long st_ctime_nsec; /* Reserved for st_ctime expansion */
+
+ unsigned long st_blksize;
+ unsigned long st_pad2;
+
+ long long st_blocks;
+};
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
+
+#if _MIPS_SIM == _MIPS_SIM_ABI64
+
+/* The memory layout is the same as of struct stat64 of the 32-bit kernel. */
+struct stat {
+ unsigned int st_dev;
+ unsigned int st_pad0[3]; /* Reserved for st_dev expansion */
+
+ unsigned long st_ino;
+
+ mode_t st_mode;
+ nlink_t st_nlink;
+
+ uid_t st_uid;
+ gid_t st_gid;
+
+ unsigned int st_rdev;
+ unsigned int st_pad1[3]; /* Reserved for st_rdev expansion */
+
+ off_t st_size;
+
+ /*
+ * Actually this should be timestruc_t st_atime, st_mtime and st_ctime
+ * but we don't have it under Linux.
+ */
+ unsigned int st_atime;
+ unsigned int st_atime_nsec;
+
+ unsigned int st_mtime;
+ unsigned int st_mtime_nsec;
+
+ unsigned int st_ctime;
+ unsigned int st_ctime_nsec;
+
+ unsigned int st_blksize;
+ unsigned int st_pad2;
+
+ unsigned long st_blocks;
+};
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
+
+#define STAT_HAVE_NSEC 1
+
+#endif /* _ASM_STAT_H */
diff --git a/arch/mips/include/asm/statfs.h b/arch/mips/include/asm/statfs.h
new file mode 100644
index 00000000000..c3ddf973c1c
--- /dev/null
+++ b/arch/mips/include/asm/statfs.h
@@ -0,0 +1,96 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1999 by Ralf Baechle
+ */
+#ifndef _ASM_STATFS_H
+#define _ASM_STATFS_H
+
+#include <linux/posix_types.h>
+#include <asm/sgidefs.h>
+
+#ifndef __KERNEL_STRICT_NAMES
+
+#include <linux/types.h>
+
+typedef __kernel_fsid_t fsid_t;
+
+#endif
+
+struct statfs {
+ long f_type;
+#define f_fstyp f_type
+ long f_bsize;
+ long f_frsize; /* Fragment size - unsupported */
+ long f_blocks;
+ long f_bfree;
+ long f_files;
+ long f_ffree;
+ long f_bavail;
+
+ /* Linux specials */
+ __kernel_fsid_t f_fsid;
+ long f_namelen;
+ long f_spare[6];
+};
+
+#if (_MIPS_SIM == _MIPS_SIM_ABI32) || (_MIPS_SIM == _MIPS_SIM_NABI32)
+
+/*
+ * Unlike the traditional version the LFAPI version has none of the ABI junk
+ */
+struct statfs64 {
+ __u32 f_type;
+ __u32 f_bsize;
+ __u32 f_frsize; /* Fragment size - unsupported */
+ __u32 __pad;
+ __u64 f_blocks;
+ __u64 f_bfree;
+ __u64 f_files;
+ __u64 f_ffree;
+ __u64 f_bavail;
+ __kernel_fsid_t f_fsid;
+ __u32 f_namelen;
+ __u32 f_spare[6];
+};
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
+
+#if _MIPS_SIM == _MIPS_SIM_ABI64
+
+struct statfs64 { /* Same as struct statfs */
+ long f_type;
+ long f_bsize;
+ long f_frsize; /* Fragment size - unsupported */
+ long f_blocks;
+ long f_bfree;
+ long f_files;
+ long f_ffree;
+ long f_bavail;
+
+ /* Linux specials */
+ __kernel_fsid_t f_fsid;
+ long f_namelen;
+ long f_spare[6];
+};
+
+struct compat_statfs64 {
+ __u32 f_type;
+ __u32 f_bsize;
+ __u32 f_frsize; /* Fragment size - unsupported */
+ __u32 __pad;
+ __u64 f_blocks;
+ __u64 f_bfree;
+ __u64 f_files;
+ __u64 f_ffree;
+ __u64 f_bavail;
+ __kernel_fsid_t f_fsid;
+ __u32 f_namelen;
+ __u32 f_spare[6];
+};
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
+
+#endif /* _ASM_STATFS_H */
diff --git a/arch/mips/include/asm/string.h b/arch/mips/include/asm/string.h
new file mode 100644
index 00000000000..436e3ad352d
--- /dev/null
+++ b/arch/mips/include/asm/string.h
@@ -0,0 +1,143 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1994, 95, 96, 97, 98, 2000, 01 Ralf Baechle
+ * Copyright (c) 2000 by Silicon Graphics, Inc.
+ * Copyright (c) 2001 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_STRING_H
+#define _ASM_STRING_H
+
+
+/*
+ * Most of the inline functions are rather naive implementations so I just
+ * didn't bother updating them for 64-bit ...
+ */
+#ifdef CONFIG_32BIT
+
+#ifndef IN_STRING_C
+
+#define __HAVE_ARCH_STRCPY
+static __inline__ char *strcpy(char *__dest, __const__ char *__src)
+{
+ char *__xdest = __dest;
+
+ __asm__ __volatile__(
+ ".set\tnoreorder\n\t"
+ ".set\tnoat\n"
+ "1:\tlbu\t$1,(%1)\n\t"
+ "addiu\t%1,1\n\t"
+ "sb\t$1,(%0)\n\t"
+ "bnez\t$1,1b\n\t"
+ "addiu\t%0,1\n\t"
+ ".set\tat\n\t"
+ ".set\treorder"
+ : "=r" (__dest), "=r" (__src)
+ : "0" (__dest), "1" (__src)
+ : "memory");
+
+ return __xdest;
+}
+
+#define __HAVE_ARCH_STRNCPY
+static __inline__ char *strncpy(char *__dest, __const__ char *__src, size_t __n)
+{
+ char *__xdest = __dest;
+
+ if (__n == 0)
+ return __xdest;
+
+ __asm__ __volatile__(
+ ".set\tnoreorder\n\t"
+ ".set\tnoat\n"
+ "1:\tlbu\t$1,(%1)\n\t"
+ "subu\t%2,1\n\t"
+ "sb\t$1,(%0)\n\t"
+ "beqz\t$1,2f\n\t"
+ "addiu\t%0,1\n\t"
+ "bnez\t%2,1b\n\t"
+ "addiu\t%1,1\n"
+ "2:\n\t"
+ ".set\tat\n\t"
+ ".set\treorder"
+ : "=r" (__dest), "=r" (__src), "=r" (__n)
+ : "0" (__dest), "1" (__src), "2" (__n)
+ : "memory");
+
+ return __xdest;
+}
+
+#define __HAVE_ARCH_STRCMP
+static __inline__ int strcmp(__const__ char *__cs, __const__ char *__ct)
+{
+ int __res;
+
+ __asm__ __volatile__(
+ ".set\tnoreorder\n\t"
+ ".set\tnoat\n\t"
+ "lbu\t%2,(%0)\n"
+ "1:\tlbu\t$1,(%1)\n\t"
+ "addiu\t%0,1\n\t"
+ "bne\t$1,%2,2f\n\t"
+ "addiu\t%1,1\n\t"
+ "bnez\t%2,1b\n\t"
+ "lbu\t%2,(%0)\n\t"
+#if defined(CONFIG_CPU_R3000)
+ "nop\n\t"
+#endif
+ "move\t%2,$1\n"
+ "2:\tsubu\t%2,$1\n"
+ "3:\t.set\tat\n\t"
+ ".set\treorder"
+ : "=r" (__cs), "=r" (__ct), "=r" (__res)
+ : "0" (__cs), "1" (__ct));
+
+ return __res;
+}
+
+#endif /* !defined(IN_STRING_C) */
+
+#define __HAVE_ARCH_STRNCMP
+static __inline__ int
+strncmp(__const__ char *__cs, __const__ char *__ct, size_t __count)
+{
+ int __res;
+
+ __asm__ __volatile__(
+ ".set\tnoreorder\n\t"
+ ".set\tnoat\n"
+ "1:\tlbu\t%3,(%0)\n\t"
+ "beqz\t%2,2f\n\t"
+ "lbu\t$1,(%1)\n\t"
+ "subu\t%2,1\n\t"
+ "bne\t$1,%3,3f\n\t"
+ "addiu\t%0,1\n\t"
+ "bnez\t%3,1b\n\t"
+ "addiu\t%1,1\n"
+ "2:\n\t"
+#if defined(CONFIG_CPU_R3000)
+ "nop\n\t"
+#endif
+ "move\t%3,$1\n"
+ "3:\tsubu\t%3,$1\n\t"
+ ".set\tat\n\t"
+ ".set\treorder"
+ : "=r" (__cs), "=r" (__ct), "=r" (__count), "=r" (__res)
+ : "0" (__cs), "1" (__ct), "2" (__count));
+
+ return __res;
+}
+#endif /* CONFIG_32BIT */
+
+#define __HAVE_ARCH_MEMSET
+extern void *memset(void *__s, int __c, size_t __count);
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
+
+#define __HAVE_ARCH_MEMMOVE
+extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
+
+#endif /* _ASM_STRING_H */
diff --git a/arch/mips/include/asm/suspend.h b/arch/mips/include/asm/suspend.h
new file mode 100644
index 00000000000..2562f8f9be0
--- /dev/null
+++ b/arch/mips/include/asm/suspend.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SUSPEND_H
+#define __ASM_SUSPEND_H
+
+/* Somewhen... Maybe :-) */
+
+#endif /* __ASM_SUSPEND_H */
diff --git a/arch/mips/include/asm/sysmips.h b/arch/mips/include/asm/sysmips.h
new file mode 100644
index 00000000000..4f47b7d6a5f
--- /dev/null
+++ b/arch/mips/include/asm/sysmips.h
@@ -0,0 +1,25 @@
+/*
+ * Definitions for the MIPS sysmips(2) call
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995 by Ralf Baechle
+ */
+#ifndef _ASM_SYSMIPS_H
+#define _ASM_SYSMIPS_H
+
+/*
+ * Commands for the sysmips(2) call
+ *
+ * sysmips(2) is deprecated - though some existing software uses it.
+ * We only support the following commands.
+ */
+#define SETNAME 1 /* set hostname */
+#define FLUSH_CACHE 3 /* writeback and invalidate caches */
+#define MIPS_FIXADE 7 /* control address error fixing */
+#define MIPS_RDNVRAM 10 /* read NVRAM */
+#define MIPS_ATOMIC_SET 2001 /* atomically set variable */
+
+#endif /* _ASM_SYSMIPS_H */
diff --git a/arch/mips/include/asm/system.h b/arch/mips/include/asm/system.h
new file mode 100644
index 00000000000..cd30f83235b
--- /dev/null
+++ b/arch/mips/include/asm/system.h
@@ -0,0 +1,222 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003, 06 by Ralf Baechle
+ * Copyright (C) 1996 by Paul M. Antoine
+ * Copyright (C) 1999 Silicon Graphics
+ * Kevin D. Kissell, kevink@mips.org and Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_SYSTEM_H
+#define _ASM_SYSTEM_H
+
+#include <linux/types.h>
+#include <linux/irqflags.h>
+
+#include <asm/addrspace.h>
+#include <asm/barrier.h>
+#include <asm/cmpxchg.h>
+#include <asm/cpu-features.h>
+#include <asm/dsp.h>
+#include <asm/watch.h>
+#include <asm/war.h>
+
+
+/*
+ * switch_to(n) should switch tasks to task nr n, first
+ * checking that n isn't the current task, in which case it does nothing.
+ */
+extern asmlinkage void *resume(void *last, void *next, void *next_ti);
+
+struct task_struct;
+
+#ifdef CONFIG_MIPS_MT_FPAFF
+
+/*
+ * Handle the scheduler resume end of FPU affinity management. We do this
+ * inline to try to keep the overhead down. If we have been forced to run on
+ * a "CPU" with an FPU because of a previous high level of FP computation,
+ * but did not actually use the FPU during the most recent time-slice (CU1
+ * isn't set), we undo the restriction on cpus_allowed.
+ *
+ * We're not calling set_cpus_allowed() here, because we have no need to
+ * force prompt migration - we're already switching the current CPU to a
+ * different thread.
+ */
+
+#define __mips_mt_fpaff_switch_to(prev) \
+do { \
+ struct thread_info *__prev_ti = task_thread_info(prev); \
+ \
+ if (cpu_has_fpu && \
+ test_ti_thread_flag(__prev_ti, TIF_FPUBOUND) && \
+ (!(KSTK_STATUS(prev) & ST0_CU1))) { \
+ clear_ti_thread_flag(__prev_ti, TIF_FPUBOUND); \
+ prev->cpus_allowed = prev->thread.user_cpus_allowed; \
+ } \
+ next->thread.emulated_fp = 0; \
+} while(0)
+
+#else
+#define __mips_mt_fpaff_switch_to(prev) do { (void) (prev); } while (0)
+#endif
+
+#define switch_to(prev, next, last) \
+do { \
+ __mips_mt_fpaff_switch_to(prev); \
+ if (cpu_has_dsp) \
+ __save_dsp(prev); \
+ (last) = resume(prev, next, task_thread_info(next)); \
+} while (0)
+
+#define finish_arch_switch(prev) \
+do { \
+ if (cpu_has_dsp) \
+ __restore_dsp(current); \
+ if (cpu_has_userlocal) \
+ write_c0_userlocal(current_thread_info()->tp_value); \
+ __restore_watch(); \
+} while (0)
+
+static inline unsigned long __xchg_u32(volatile int * m, unsigned int val)
+{
+ __u32 retval;
+
+ if (cpu_has_llsc && R10000_LLSC_WAR) {
+ unsigned long dummy;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: ll %0, %3 # xchg_u32 \n"
+ " .set mips0 \n"
+ " move %2, %z4 \n"
+ " .set mips3 \n"
+ " sc %2, %1 \n"
+ " beqzl %2, 1b \n"
+ " .set mips0 \n"
+ : "=&r" (retval), "=m" (*m), "=&r" (dummy)
+ : "R" (*m), "Jr" (val)
+ : "memory");
+ } else if (cpu_has_llsc) {
+ unsigned long dummy;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: ll %0, %3 # xchg_u32 \n"
+ " .set mips0 \n"
+ " move %2, %z4 \n"
+ " .set mips3 \n"
+ " sc %2, %1 \n"
+ " beqz %2, 2f \n"
+ " .subsection 2 \n"
+ "2: b 1b \n"
+ " .previous \n"
+ " .set mips0 \n"
+ : "=&r" (retval), "=m" (*m), "=&r" (dummy)
+ : "R" (*m), "Jr" (val)
+ : "memory");
+ } else {
+ unsigned long flags;
+
+ raw_local_irq_save(flags);
+ retval = *m;
+ *m = val;
+ raw_local_irq_restore(flags); /* implies memory barrier */
+ }
+
+ smp_llsc_mb();
+
+ return retval;
+}
+
+#ifdef CONFIG_64BIT
+static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val)
+{
+ __u64 retval;
+
+ if (cpu_has_llsc && R10000_LLSC_WAR) {
+ unsigned long dummy;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: lld %0, %3 # xchg_u64 \n"
+ " move %2, %z4 \n"
+ " scd %2, %1 \n"
+ " beqzl %2, 1b \n"
+ " .set mips0 \n"
+ : "=&r" (retval), "=m" (*m), "=&r" (dummy)
+ : "R" (*m), "Jr" (val)
+ : "memory");
+ } else if (cpu_has_llsc) {
+ unsigned long dummy;
+
+ __asm__ __volatile__(
+ " .set mips3 \n"
+ "1: lld %0, %3 # xchg_u64 \n"
+ " move %2, %z4 \n"
+ " scd %2, %1 \n"
+ " beqz %2, 2f \n"
+ " .subsection 2 \n"
+ "2: b 1b \n"
+ " .previous \n"
+ " .set mips0 \n"
+ : "=&r" (retval), "=m" (*m), "=&r" (dummy)
+ : "R" (*m), "Jr" (val)
+ : "memory");
+ } else {
+ unsigned long flags;
+
+ raw_local_irq_save(flags);
+ retval = *m;
+ *m = val;
+ raw_local_irq_restore(flags); /* implies memory barrier */
+ }
+
+ smp_llsc_mb();
+
+ return retval;
+}
+#else
+extern __u64 __xchg_u64_unsupported_on_32bit_kernels(volatile __u64 * m, __u64 val);
+#define __xchg_u64 __xchg_u64_unsupported_on_32bit_kernels
+#endif
+
+/* This function doesn't exist, so you'll get a linker error
+ if something tries to do an invalid xchg(). */
+extern void __xchg_called_with_bad_pointer(void);
+
+static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+{
+ switch (size) {
+ case 4:
+ return __xchg_u32(ptr, x);
+ case 8:
+ return __xchg_u64(ptr, x);
+ }
+ __xchg_called_with_bad_pointer();
+ return x;
+}
+
+#define xchg(ptr, x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
+
+extern void set_handler(unsigned long offset, void *addr, unsigned long len);
+extern void set_uncached_handler(unsigned long offset, void *addr, unsigned long len);
+
+typedef void (*vi_handler_t)(void);
+extern void *set_vi_handler(int n, vi_handler_t addr);
+
+extern void *set_except_vector(int n, void *addr);
+extern unsigned long ebase;
+extern void per_cpu_trap_init(void);
+
+/*
+ * See include/asm-ia64/system.h; prevents deadlock on SMP
+ * systems.
+ */
+#define __ARCH_WANT_UNLOCKED_CTXSW
+
+extern unsigned long arch_align_stack(unsigned long sp);
+
+#endif /* _ASM_SYSTEM_H */
diff --git a/arch/mips/include/asm/termbits.h b/arch/mips/include/asm/termbits.h
new file mode 100644
index 00000000000..c83c68444e8
--- /dev/null
+++ b/arch/mips/include/asm/termbits.h
@@ -0,0 +1,226 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 96, 99, 2001, 06 Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ */
+#ifndef _ASM_TERMBITS_H
+#define _ASM_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char cc_t;
+typedef unsigned int speed_t;
+typedef unsigned int tcflag_t;
+
+/*
+ * The ABI says nothing about NCC but seems to use NCCS as
+ * replacement for it in struct termio
+ */
+#define NCCS 23
+struct termios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+};
+
+struct termios2 {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0 /* Interrupt character [ISIG]. */
+#define VQUIT 1 /* Quit character [ISIG]. */
+#define VERASE 2 /* Erase character [ICANON]. */
+#define VKILL 3 /* Kill-line character [ICANON]. */
+#define VMIN 4 /* Minimum number of bytes read at once [!ICANON]. */
+#define VTIME 5 /* Time-out value (tenths of a second) [!ICANON]. */
+#define VEOL2 6 /* Second EOL character [ICANON]. */
+#define VSWTC 7 /* ??? */
+#define VSWTCH VSWTC
+#define VSTART 8 /* Start (X-ON) character [IXON, IXOFF]. */
+#define VSTOP 9 /* Stop (X-OFF) character [IXON, IXOFF]. */
+#define VSUSP 10 /* Suspend character [ISIG]. */
+#if 0
+/*
+ * VDSUSP is not supported
+ */
+#define VDSUSP 11 /* Delayed suspend character [ISIG]. */
+#endif
+#define VREPRINT 12 /* Reprint-line character [ICANON]. */
+#define VDISCARD 13 /* Discard character [IEXTEN]. */
+#define VWERASE 14 /* Word-erase character [ICANON]. */
+#define VLNEXT 15 /* Literal-next character [IEXTEN]. */
+#define VEOF 16 /* End-of-file character [ICANON]. */
+#define VEOL 17 /* End-of-line character [ICANON]. */
+
+/* c_iflag bits */
+#define IGNBRK 0000001 /* Ignore break condition. */
+#define BRKINT 0000002 /* Signal interrupt on break. */
+#define IGNPAR 0000004 /* Ignore characters with parity errors. */
+#define PARMRK 0000010 /* Mark parity and framing errors. */
+#define INPCK 0000020 /* Enable input parity check. */
+#define ISTRIP 0000040 /* Strip 8th bit off characters. */
+#define INLCR 0000100 /* Map NL to CR on input. */
+#define IGNCR 0000200 /* Ignore CR. */
+#define ICRNL 0000400 /* Map CR to NL on input. */
+#define IUCLC 0001000 /* Map upper case to lower case on input. */
+#define IXON 0002000 /* Enable start/stop output control. */
+#define IXANY 0004000 /* Any character will restart after stop. */
+#define IXOFF 0010000 /* Enable start/stop input control. */
+#define IMAXBEL 0020000 /* Ring bell when input queue is full. */
+#define IUTF8 0040000 /* Input is UTF-8 */
+
+/* c_oflag bits */
+#define OPOST 0000001 /* Perform output processing. */
+#define OLCUC 0000002 /* Map lower case to upper case on output. */
+#define ONLCR 0000004 /* Map NL to CR-NL on output. */
+#define OCRNL 0000010
+#define ONOCR 0000020
+#define ONLRET 0000040
+#define OFILL 0000100
+#define OFDEL 0000200
+#define NLDLY 0000400
+#define NL0 0000000
+#define NL1 0000400
+#define CRDLY 0003000
+#define CR0 0000000
+#define CR1 0001000
+#define CR2 0002000
+#define CR3 0003000
+#define TABDLY 0014000
+#define TAB0 0000000
+#define TAB1 0004000
+#define TAB2 0010000
+#define TAB3 0014000
+#define XTABS 0014000
+#define BSDLY 0020000
+#define BS0 0000000
+#define BS1 0020000
+#define VTDLY 0040000
+#define VT0 0000000
+#define VT1 0040000
+#define FFDLY 0100000
+#define FF0 0000000
+#define FF1 0100000
+/*
+#define PAGEOUT ???
+#define WRAP ???
+ */
+
+/* c_cflag bit meaning */
+#define CBAUD 0010017
+#define B0 0000000 /* hang up */
+#define B50 0000001
+#define B75 0000002
+#define B110 0000003
+#define B134 0000004
+#define B150 0000005
+#define B200 0000006
+#define B300 0000007
+#define B600 0000010
+#define B1200 0000011
+#define B1800 0000012
+#define B2400 0000013
+#define B4800 0000014
+#define B9600 0000015
+#define B19200 0000016
+#define B38400 0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE 0000060 /* Number of bits per byte (mask). */
+#define CS5 0000000 /* 5 bits per byte. */
+#define CS6 0000020 /* 6 bits per byte. */
+#define CS7 0000040 /* 7 bits per byte. */
+#define CS8 0000060 /* 8 bits per byte. */
+#define CSTOPB 0000100 /* Two stop bits instead of one. */
+#define CREAD 0000200 /* Enable receiver. */
+#define PARENB 0000400 /* Parity enable. */
+#define PARODD 0001000 /* Odd parity instead of even. */
+#define HUPCL 0002000 /* Hang up on last close. */
+#define CLOCAL 0004000 /* Ignore modem status lines. */
+#define CBAUDEX 0010000
+#define BOTHER 0010000
+#define B57600 0010001
+#define B115200 0010002
+#define B230400 0010003
+#define B460800 0010004
+#define B500000 0010005
+#define B576000 0010006
+#define B921600 0010007
+#define B1000000 0010010
+#define B1152000 0010011
+#define B1500000 0010012
+#define B2000000 0010013
+#define B2500000 0010014
+#define B3000000 0010015
+#define B3500000 0010016
+#define B4000000 0010017
+#define CIBAUD 002003600000 /* input baud rate */
+#define CMSPAR 010000000000 /* mark or space (stick) parity */
+#define CRTSCTS 020000000000 /* flow control */
+
+#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG 0000001 /* Enable signals. */
+#define ICANON 0000002 /* Do erase and kill processing. */
+#define XCASE 0000004
+#define ECHO 0000010 /* Enable echo. */
+#define ECHOE 0000020 /* Visual erase for ERASE. */
+#define ECHOK 0000040 /* Echo NL after KILL. */
+#define ECHONL 0000100 /* Echo NL even if ECHO is off. */
+#define NOFLSH 0000200 /* Disable flush after interrupt. */
+#define IEXTEN 0000400 /* Enable DISCARD and LNEXT. */
+#define ECHOCTL 0001000 /* Echo control characters as ^X. */
+#define ECHOPRT 0002000 /* Hardcopy visual erase. */
+#define ECHOKE 0004000 /* Visual erase for KILL. */
+#define FLUSHO 0020000
+#define PENDIN 0040000 /* Retype pending input (state). */
+#define TOSTOP 0100000 /* Send SIGTTOU for background output. */
+#define ITOSTOP TOSTOP
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
+
+/* tcflow() and TCXONC use these */
+#define TCOOFF 0 /* Suspend output. */
+#define TCOON 1 /* Restart suspended output. */
+#define TCIOFF 2 /* Send a STOP character. */
+#define TCION 3 /* Send a START character. */
+
+/* tcflush() and TCFLSH use these */
+#define TCIFLUSH 0 /* Discard data received but not yet read. */
+#define TCOFLUSH 1 /* Discard data written but not yet sent. */
+#define TCIOFLUSH 2 /* Discard all pending data. */
+
+/* tcsetattr uses these */
+#define TCSANOW TCSETS /* Change immediately. */
+#define TCSADRAIN TCSETSW /* Change when pending output is written. */
+#define TCSAFLUSH TCSETSF /* Flush pending input before changing. */
+
+#endif /* _ASM_TERMBITS_H */
diff --git a/arch/mips/include/asm/termios.h b/arch/mips/include/asm/termios.h
new file mode 100644
index 00000000000..a275661fa7e
--- /dev/null
+++ b/arch/mips/include/asm/termios.h
@@ -0,0 +1,132 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 1996, 2000, 2001 by Ralf Baechle
+ * Copyright (C) 2000, 2001 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_TERMIOS_H
+#define _ASM_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct sgttyb {
+ char sg_ispeed;
+ char sg_ospeed;
+ char sg_erase;
+ char sg_kill;
+ int sg_flags; /* SGI special - int, not short */
+};
+
+struct tchars {
+ char t_intrc;
+ char t_quitc;
+ char t_startc;
+ char t_stopc;
+ char t_eofc;
+ char t_brkc;
+};
+
+struct ltchars {
+ char t_suspc; /* stop process signal */
+ char t_dsuspc; /* delayed stop process signal */
+ char t_rprntc; /* reprint line */
+ char t_flushc; /* flush output (toggles) */
+ char t_werasc; /* word erase */
+ char t_lnextc; /* literal next character */
+};
+
+/* TIOCGSIZE, TIOCSSIZE not defined yet. Only needed for SunOS source
+ compatibility anyway ... */
+
+struct winsize {
+ unsigned short ws_row;
+ unsigned short ws_col;
+ unsigned short ws_xpixel;
+ unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+ unsigned short c_iflag; /* input mode flags */
+ unsigned short c_oflag; /* output mode flags */
+ unsigned short c_cflag; /* control mode flags */
+ unsigned short c_lflag; /* local mode flags */
+ char c_line; /* line discipline */
+ unsigned char c_cc[NCCS]; /* control characters */
+};
+
+#ifdef __KERNEL__
+#include <linux/module.h>
+
+/*
+ * intr=^C quit=^\ erase=del kill=^U
+ * vmin=\1 vtime=\0 eol2=\0 swtc=\0
+ * start=^Q stop=^S susp=^Z vdsusp=
+ * reprint=^R discard=^U werase=^W lnext=^V
+ * eof=^D eol=\0
+ */
+#define INIT_C_CC "\003\034\177\025\1\0\0\0\021\023\032\0\022\017\027\026\004\0"
+#endif
+
+/* modem lines */
+#define TIOCM_LE 0x001 /* line enable */
+#define TIOCM_DTR 0x002 /* data terminal ready */
+#define TIOCM_RTS 0x004 /* request to send */
+#define TIOCM_ST 0x010 /* secondary transmit */
+#define TIOCM_SR 0x020 /* secondary receive */
+#define TIOCM_CTS 0x040 /* clear to send */
+#define TIOCM_CAR 0x100 /* carrier detect */
+#define TIOCM_CD TIOCM_CAR
+#define TIOCM_RNG 0x200 /* ring */
+#define TIOCM_RI TIOCM_RNG
+#define TIOCM_DSR 0x400 /* data set ready */
+#define TIOCM_OUT1 0x2000
+#define TIOCM_OUT2 0x4000
+#define TIOCM_LOOP 0x8000
+
+#ifdef __KERNEL__
+
+#include <linux/string.h>
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+ unsigned short tmp; \
+ get_user(tmp, &(termio)->c_iflag); \
+ (termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \
+ get_user(tmp, &(termio)->c_oflag); \
+ (termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \
+ get_user(tmp, &(termio)->c_cflag); \
+ (termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \
+ get_user(tmp, &(termio)->c_lflag); \
+ (termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \
+ get_user((termios)->c_line, &(termio)->c_line); \
+ copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+ put_user((termios)->c_iflag, &(termio)->c_iflag); \
+ put_user((termios)->c_oflag, &(termio)->c_oflag); \
+ put_user((termios)->c_cflag, &(termio)->c_cflag); \
+ put_user((termios)->c_lflag, &(termio)->c_lflag); \
+ put_user((termios)->c_line, &(termio)->c_line); \
+ copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif /* defined(__KERNEL__) */
+
+#endif /* _ASM_TERMIOS_H */
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
new file mode 100644
index 00000000000..3f76de73c94
--- /dev/null
+++ b/arch/mips/include/asm/thread_info.h
@@ -0,0 +1,153 @@
+/* thread_info.h: MIPS low-level thread information
+ *
+ * Copyright (C) 2002 David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+
+#ifndef __ASSEMBLY__
+
+#include <asm/processor.h>
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants
+ * must also be changed
+ */
+struct thread_info {
+ struct task_struct *task; /* main task structure */
+ struct exec_domain *exec_domain; /* execution domain */
+ unsigned long flags; /* low level flags */
+ unsigned long tp_value; /* thread pointer */
+ __u32 cpu; /* current CPU */
+ int preempt_count; /* 0 => preemptable, <0 => BUG */
+
+ mm_segment_t addr_limit; /* thread address space:
+ 0-0xBFFFFFFF for user-thead
+ 0-0xFFFFFFFF for kernel-thread
+ */
+ struct restart_block restart_block;
+ struct pt_regs *regs;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#define INIT_THREAD_INFO(tsk) \
+{ \
+ .task = &tsk, \
+ .exec_domain = &default_exec_domain, \
+ .flags = _TIF_FIXADE, \
+ .cpu = 0, \
+ .preempt_count = 1, \
+ .addr_limit = KERNEL_DS, \
+ .restart_block = { \
+ .fn = do_no_restart_syscall, \
+ }, \
+}
+
+#define init_thread_info (init_thread_union.thread_info)
+#define init_stack (init_thread_union.stack)
+
+/* How to get the thread information struct from C. */
+register struct thread_info *__current_thread_info __asm__("$28");
+#define current_thread_info() __current_thread_info
+
+/* thread information allocation */
+#if defined(CONFIG_PAGE_SIZE_4KB) && defined(CONFIG_32BIT)
+#define THREAD_SIZE_ORDER (1)
+#endif
+#if defined(CONFIG_PAGE_SIZE_4KB) && defined(CONFIG_64BIT)
+#define THREAD_SIZE_ORDER (2)
+#endif
+#ifdef CONFIG_PAGE_SIZE_8KB
+#define THREAD_SIZE_ORDER (1)
+#endif
+#ifdef CONFIG_PAGE_SIZE_16KB
+#define THREAD_SIZE_ORDER (0)
+#endif
+#ifdef CONFIG_PAGE_SIZE_64KB
+#define THREAD_SIZE_ORDER (0)
+#endif
+
+#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER)
+#define THREAD_MASK (THREAD_SIZE - 1UL)
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define alloc_thread_info(tsk) \
+({ \
+ struct thread_info *ret; \
+ \
+ ret = kzalloc(THREAD_SIZE, GFP_KERNEL); \
+ \
+ ret; \
+})
+#else
+#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL)
+#endif
+
+#define free_thread_info(info) kfree(info)
+
+#endif /* !__ASSEMBLY__ */
+
+#define PREEMPT_ACTIVE 0x10000000
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to
+ * access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SIGPENDING 1 /* signal pending */
+#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
+#define TIF_SYSCALL_AUDIT 3 /* syscall auditing active */
+#define TIF_SECCOMP 4 /* secure computing */
+#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal() */
+#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */
+#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE 18
+#define TIF_FREEZE 19
+#define TIF_FIXADE 20 /* Fix address errors in software */
+#define TIF_LOGADE 21 /* Log address errors to syslog */
+#define TIF_32BIT_REGS 22 /* also implies 16/32 fprs */
+#define TIF_32BIT_ADDR 23 /* 32-bit address space (o32/n32) */
+#define TIF_FPUBOUND 24 /* thread bound to FPU-full CPU set */
+#define TIF_LOAD_WATCH 25 /* If set, load watch registers */
+#define TIF_SYSCALL_TRACE 31 /* syscall trace active */
+
+#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
+#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT)
+#define _TIF_SECCOMP (1<<TIF_SECCOMP)
+#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
+#define _TIF_USEDFPU (1<<TIF_USEDFPU)
+#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
+#define _TIF_FREEZE (1<<TIF_FREEZE)
+#define _TIF_FIXADE (1<<TIF_FIXADE)
+#define _TIF_LOGADE (1<<TIF_LOGADE)
+#define _TIF_32BIT_REGS (1<<TIF_32BIT_REGS)
+#define _TIF_32BIT_ADDR (1<<TIF_32BIT_ADDR)
+#define _TIF_FPUBOUND (1<<TIF_FPUBOUND)
+#define _TIF_LOAD_WATCH (1<<TIF_LOAD_WATCH)
+
+/* work to do on interrupt/exception return */
+#define _TIF_WORK_MASK (0x0000ffef & ~_TIF_SECCOMP)
+/* work to do on any return to u-space */
+#define _TIF_ALLWORK_MASK (0x8000ffff & ~_TIF_SECCOMP)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h
new file mode 100644
index 00000000000..d3bd5c5aa2e
--- /dev/null
+++ b/arch/mips/include/asm/time.h
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2001, 2002, MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ * Copyright (c) 2003 Maciej W. Rozycki
+ *
+ * include/asm-mips/time.h
+ * header file for the new style time.c file and time services.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_TIME_H
+#define _ASM_TIME_H
+
+#include <linux/rtc.h>
+#include <linux/spinlock.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+
+extern spinlock_t rtc_lock;
+
+/*
+ * RTC ops. By default, they point to weak no-op RTC functions.
+ * rtc_mips_set_time - reverse the above translation and set time to RTC.
+ * rtc_mips_set_mmss - similar to rtc_set_time, but only min and sec need
+ * to be set. Used by RTC sync-up.
+ */
+extern int rtc_mips_set_time(unsigned long);
+extern int rtc_mips_set_mmss(unsigned long);
+
+/*
+ * board specific routines required by time_init().
+ */
+extern void plat_time_init(void);
+
+/*
+ * mips_hpt_frequency - must be set if you intend to use an R4k-compatible
+ * counter as a timer interrupt source.
+ */
+extern unsigned int mips_hpt_frequency;
+
+/*
+ * The performance counter IRQ on MIPS is a close relative to the timer IRQ
+ * so it lives here.
+ */
+extern int (*perf_irq)(void);
+
+/*
+ * Initialize the calling CPU's compare interrupt as clockevent device
+ */
+#ifdef CONFIG_CEVT_R4K
+extern int mips_clockevent_init(void);
+extern unsigned int __weak get_c0_compare_int(void);
+#else
+static inline int mips_clockevent_init(void)
+{
+ return -ENXIO;
+}
+#endif
+
+/*
+ * Initialize the count register as a clocksource
+ */
+#ifdef CONFIG_CEVT_R4K
+extern int init_mips_clocksource(void);
+#else
+static inline int init_mips_clocksource(void)
+{
+ return 0;
+}
+#endif
+
+extern void clocksource_set_clock(struct clocksource *cs, unsigned int clock);
+extern void clockevent_set_clock(struct clock_event_device *cd,
+ unsigned int clock);
+
+#endif /* _ASM_TIME_H */
diff --git a/arch/mips/include/asm/timex.h b/arch/mips/include/asm/timex.h
new file mode 100644
index 00000000000..6529704aa73
--- /dev/null
+++ b/arch/mips/include/asm/timex.h
@@ -0,0 +1,43 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 1999, 2003 by Ralf Baechle
+ */
+#ifndef _ASM_TIMEX_H
+#define _ASM_TIMEX_H
+
+#ifdef __KERNEL__
+
+#include <asm/mipsregs.h>
+
+/*
+ * This is the clock rate of the i8253 PIT. A MIPS system may not have
+ * a PIT by the symbol is used all over the kernel including some APIs.
+ * So keeping it defined to the number for the PIT is the only sane thing
+ * for now.
+ */
+#define CLOCK_TICK_RATE 1193182
+
+/*
+ * Standard way to access the cycle counter.
+ * Currently only used on SMP for scheduling.
+ *
+ * Only the low 32 bits are available as a continuously counting entity.
+ * But this only means we'll force a reschedule every 8 seconds or so,
+ * which isn't an evil thing.
+ *
+ * We know that all SMP capable CPUs have cycle counters.
+ */
+
+typedef unsigned int cycles_t;
+
+static inline cycles_t get_cycles(void)
+{
+ return 0;
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_TIMEX_H */
diff --git a/arch/mips/include/asm/titan_dep.h b/arch/mips/include/asm/titan_dep.h
new file mode 100644
index 00000000000..fee1908c65d
--- /dev/null
+++ b/arch/mips/include/asm/titan_dep.h
@@ -0,0 +1,231 @@
+/*
+ * Copyright 2003 PMC-Sierra
+ * Author: Manish Lachwani (lachwani@pmc-sierra.com)
+ *
+ * Board specific definititions for the PMC-Sierra Yosemite
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __TITAN_DEP_H__
+#define __TITAN_DEP_H__
+
+#include <asm/addrspace.h> /* for KSEG1ADDR() */
+#include <asm/byteorder.h> /* for cpu_to_le32() */
+
+#define TITAN_READ(ofs) \
+ (*(volatile u32 *)(ocd_base+(ofs)))
+#define TITAN_READ_16(ofs) \
+ (*(volatile u16 *)(ocd_base+(ofs)))
+#define TITAN_READ_8(ofs) \
+ (*(volatile u8 *)(ocd_base+(ofs)))
+
+#define TITAN_WRITE(ofs, data) \
+ do { *(volatile u32 *)(ocd_base+(ofs)) = (data); } while (0)
+#define TITAN_WRITE_16(ofs, data) \
+ do { *(volatile u16 *)(ocd_base+(ofs)) = (data); } while (0)
+#define TITAN_WRITE_8(ofs, data) \
+ do { *(volatile u8 *)(ocd_base+(ofs)) = (data); } while (0)
+
+/*
+ * PCI specific defines
+ */
+#define TITAN_PCI_0_CONFIG_ADDRESS 0x780
+#define TITAN_PCI_0_CONFIG_DATA 0x784
+
+/*
+ * HT specific defines
+ */
+#define RM9000x2_HTLINK_REG 0xbb000644
+#define RM9000x2_BASE_ADDR 0xbb000000
+
+#define OCD_BASE 0xfb000000UL
+#define OCD_SIZE 0x3000UL
+
+extern unsigned long ocd_base;
+
+/*
+ * OCD Registers
+ */
+#define RM9000x2_OCD_LKB5 0x0128 /* Ethernet */
+#define RM9000x2_OCD_LKM5 0x012c
+
+#define RM9000x2_OCD_LKB7 0x0138 /* HT Region 0 */
+#define RM9000x2_OCD_LKM7 0x013c
+#define RM9000x2_OCD_LKB8 0x0140 /* HT Region 1 */
+#define RM9000x2_OCD_LKM8 0x0144
+
+#define RM9000x2_OCD_LKB9 0x0148 /* Local Bus */
+#define RM9000x2_OCD_LKM9 0x014c
+#define RM9000x2_OCD_LKB10 0x0150
+#define RM9000x2_OCD_LKM10 0x0154
+#define RM9000x2_OCD_LKB11 0x0158
+#define RM9000x2_OCD_LKM11 0x015c
+#define RM9000x2_OCD_LKB12 0x0160
+#define RM9000x2_OCD_LKM12 0x0164
+
+#define RM9000x2_OCD_LKB13 0x0168 /* Scratch RAM */
+#define RM9000x2_OCD_LKM13 0x016c
+
+#define RM9000x2_OCD_LPD0 0x0200 /* Local Bus */
+#define RM9000x2_OCD_LPD1 0x0210
+#define RM9000x2_OCD_LPD2 0x0220
+#define RM9000x2_OCD_LPD3 0x0230
+
+#define RM9000x2_OCD_HTDVID 0x0600 /* HT Device Header */
+#define RM9000x2_OCD_HTSC 0x0604
+#define RM9000x2_OCD_HTCCR 0x0608
+#define RM9000x2_OCD_HTBHL 0x060c
+#define RM9000x2_OCD_HTBAR0 0x0610
+#define RM9000x2_OCD_HTBAR1 0x0614
+#define RM9000x2_OCD_HTBAR2 0x0618
+#define RM9000x2_OCD_HTBAR3 0x061c
+#define RM9000x2_OCD_HTBAR4 0x0620
+#define RM9000x2_OCD_HTBAR5 0x0624
+#define RM9000x2_OCD_HTCBCPT 0x0628
+#define RM9000x2_OCD_HTSDVID 0x062c
+#define RM9000x2_OCD_HTXRA 0x0630
+#define RM9000x2_OCD_HTCAP1 0x0634
+#define RM9000x2_OCD_HTIL 0x063c
+
+#define RM9000x2_OCD_HTLCC 0x0640 /* HT Capability Block */
+#define RM9000x2_OCD_HTLINK 0x0644
+#define RM9000x2_OCD_HTFQREV 0x0648
+
+#define RM9000x2_OCD_HTERCTL 0x0668 /* HT Controller */
+#define RM9000x2_OCD_HTRXDB 0x066c
+#define RM9000x2_OCD_HTIMPED 0x0670
+#define RM9000x2_OCD_HTSWIMP 0x0674
+#define RM9000x2_OCD_HTCAL 0x0678
+
+#define RM9000x2_OCD_HTBAA30 0x0680
+#define RM9000x2_OCD_HTBAA54 0x0684
+#define RM9000x2_OCD_HTMASK0 0x0688
+#define RM9000x2_OCD_HTMASK1 0x068c
+#define RM9000x2_OCD_HTMASK2 0x0690
+#define RM9000x2_OCD_HTMASK3 0x0694
+#define RM9000x2_OCD_HTMASK4 0x0698
+#define RM9000x2_OCD_HTMASK5 0x069c
+
+#define RM9000x2_OCD_HTIFCTL 0x06a0
+#define RM9000x2_OCD_HTPLL 0x06a4
+
+#define RM9000x2_OCD_HTSRI 0x06b0
+#define RM9000x2_OCD_HTRXNUM 0x06b4
+#define RM9000x2_OCD_HTTXNUM 0x06b8
+
+#define RM9000x2_OCD_HTTXCNT 0x06c8
+
+#define RM9000x2_OCD_HTERROR 0x06d8
+#define RM9000x2_OCD_HTRCRCE 0x06dc
+#define RM9000x2_OCD_HTEOI 0x06e0
+
+#define RM9000x2_OCD_CRCR 0x06f0
+
+#define RM9000x2_OCD_HTCFGA 0x06f8
+#define RM9000x2_OCD_HTCFGD 0x06fc
+
+#define RM9000x2_OCD_INTMSG 0x0a00
+
+#define RM9000x2_OCD_INTPIN0 0x0a40
+#define RM9000x2_OCD_INTPIN1 0x0a44
+#define RM9000x2_OCD_INTPIN2 0x0a48
+#define RM9000x2_OCD_INTPIN3 0x0a4c
+#define RM9000x2_OCD_INTPIN4 0x0a50
+#define RM9000x2_OCD_INTPIN5 0x0a54
+#define RM9000x2_OCD_INTPIN6 0x0a58
+#define RM9000x2_OCD_INTPIN7 0x0a5c
+#define RM9000x2_OCD_SEM 0x0a60
+#define RM9000x2_OCD_SEMSET 0x0a64
+#define RM9000x2_OCD_SEMCLR 0x0a68
+
+#define RM9000x2_OCD_TKT 0x0a70
+#define RM9000x2_OCD_TKTINC 0x0a74
+
+#define RM9000x2_OCD_NMICONFIG 0x0ac0 /* Interrupts */
+#define RM9000x2_OCD_INTP0PRI 0x1a80
+#define RM9000x2_OCD_INTP1PRI 0x1a80
+#define RM9000x2_OCD_INTP0STATUS0 0x1b00
+#define RM9000x2_OCD_INTP0MASK0 0x1b04
+#define RM9000x2_OCD_INTP0SET0 0x1b08
+#define RM9000x2_OCD_INTP0CLEAR0 0x1b0c
+#define RM9000x2_OCD_INTP0STATUS1 0x1b10
+#define RM9000x2_OCD_INTP0MASK1 0x1b14
+#define RM9000x2_OCD_INTP0SET1 0x1b18
+#define RM9000x2_OCD_INTP0CLEAR1 0x1b1c
+#define RM9000x2_OCD_INTP0STATUS2 0x1b20
+#define RM9000x2_OCD_INTP0MASK2 0x1b24
+#define RM9000x2_OCD_INTP0SET2 0x1b28
+#define RM9000x2_OCD_INTP0CLEAR2 0x1b2c
+#define RM9000x2_OCD_INTP0STATUS3 0x1b30
+#define RM9000x2_OCD_INTP0MASK3 0x1b34
+#define RM9000x2_OCD_INTP0SET3 0x1b38
+#define RM9000x2_OCD_INTP0CLEAR3 0x1b3c
+#define RM9000x2_OCD_INTP0STATUS4 0x1b40
+#define RM9000x2_OCD_INTP0MASK4 0x1b44
+#define RM9000x2_OCD_INTP0SET4 0x1b48
+#define RM9000x2_OCD_INTP0CLEAR4 0x1b4c
+#define RM9000x2_OCD_INTP0STATUS5 0x1b50
+#define RM9000x2_OCD_INTP0MASK5 0x1b54
+#define RM9000x2_OCD_INTP0SET5 0x1b58
+#define RM9000x2_OCD_INTP0CLEAR5 0x1b5c
+#define RM9000x2_OCD_INTP0STATUS6 0x1b60
+#define RM9000x2_OCD_INTP0MASK6 0x1b64
+#define RM9000x2_OCD_INTP0SET6 0x1b68
+#define RM9000x2_OCD_INTP0CLEAR6 0x1b6c
+#define RM9000x2_OCD_INTP0STATUS7 0x1b70
+#define RM9000x2_OCD_INTP0MASK7 0x1b74
+#define RM9000x2_OCD_INTP0SET7 0x1b78
+#define RM9000x2_OCD_INTP0CLEAR7 0x1b7c
+#define RM9000x2_OCD_INTP1STATUS0 0x2b00
+#define RM9000x2_OCD_INTP1MASK0 0x2b04
+#define RM9000x2_OCD_INTP1SET0 0x2b08
+#define RM9000x2_OCD_INTP1CLEAR0 0x2b0c
+#define RM9000x2_OCD_INTP1STATUS1 0x2b10
+#define RM9000x2_OCD_INTP1MASK1 0x2b14
+#define RM9000x2_OCD_INTP1SET1 0x2b18
+#define RM9000x2_OCD_INTP1CLEAR1 0x2b1c
+#define RM9000x2_OCD_INTP1STATUS2 0x2b20
+#define RM9000x2_OCD_INTP1MASK2 0x2b24
+#define RM9000x2_OCD_INTP1SET2 0x2b28
+#define RM9000x2_OCD_INTP1CLEAR2 0x2b2c
+#define RM9000x2_OCD_INTP1STATUS3 0x2b30
+#define RM9000x2_OCD_INTP1MASK3 0x2b34
+#define RM9000x2_OCD_INTP1SET3 0x2b38
+#define RM9000x2_OCD_INTP1CLEAR3 0x2b3c
+#define RM9000x2_OCD_INTP1STATUS4 0x2b40
+#define RM9000x2_OCD_INTP1MASK4 0x2b44
+#define RM9000x2_OCD_INTP1SET4 0x2b48
+#define RM9000x2_OCD_INTP1CLEAR4 0x2b4c
+#define RM9000x2_OCD_INTP1STATUS5 0x2b50
+#define RM9000x2_OCD_INTP1MASK5 0x2b54
+#define RM9000x2_OCD_INTP1SET5 0x2b58
+#define RM9000x2_OCD_INTP1CLEAR5 0x2b5c
+#define RM9000x2_OCD_INTP1STATUS6 0x2b60
+#define RM9000x2_OCD_INTP1MASK6 0x2b64
+#define RM9000x2_OCD_INTP1SET6 0x2b68
+#define RM9000x2_OCD_INTP1CLEAR6 0x2b6c
+#define RM9000x2_OCD_INTP1STATUS7 0x2b70
+#define RM9000x2_OCD_INTP1MASK7 0x2b74
+#define RM9000x2_OCD_INTP1SET7 0x2b78
+#define RM9000x2_OCD_INTP1CLEAR7 0x2b7c
+
+#define OCD_READ(reg) (*(volatile unsigned int *)(ocd_base + (reg)))
+#define OCD_WRITE(reg, val) \
+ do { *(volatile unsigned int *)(ocd_base + (reg)) = (val); } while (0)
+
+/*
+ * Hypertransport specific macros
+ */
+#define RM9K_WRITE(ofs, data) *(volatile u_int32_t *)(RM9000x2_BASE_ADDR+ofs) = data
+#define RM9K_WRITE_8(ofs, data) *(volatile u8 *)(RM9000x2_BASE_ADDR+ofs) = data
+#define RM9K_WRITE_16(ofs, data) *(volatile u16 *)(RM9000x2_BASE_ADDR+ofs) = data
+
+#define RM9K_READ(ofs, val) *(val) = *(volatile u_int32_t *)(RM9000x2_BASE_ADDR+ofs)
+#define RM9K_READ_8(ofs, val) *(val) = *(volatile u8 *)(RM9000x2_BASE_ADDR+ofs)
+#define RM9K_READ_16(ofs, val) *(val) = *(volatile u16 *)(RM9000x2_BASE_ADDR+ofs)
+
+#endif
diff --git a/arch/mips/include/asm/tlb.h b/arch/mips/include/asm/tlb.h
new file mode 100644
index 00000000000..80d9dfcf1e8
--- /dev/null
+++ b/arch/mips/include/asm/tlb.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_TLB_H
+#define __ASM_TLB_H
+
+/*
+ * MIPS doesn't need any special per-pte or per-vma handling, except
+ * we need to flush cache for area to be unmapped.
+ */
+#define tlb_start_vma(tlb, vma) \
+ do { \
+ if (!tlb->fullmm) \
+ flush_cache_range(vma, vma->vm_start, vma->vm_end); \
+ } while (0)
+#define tlb_end_vma(tlb, vma) do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
+
+/*
+ * .. because we flush the whole mm when it fills up.
+ */
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+
+#include <asm-generic/tlb.h>
+
+#endif /* __ASM_TLB_H */
diff --git a/arch/mips/include/asm/tlbdebug.h b/arch/mips/include/asm/tlbdebug.h
new file mode 100644
index 00000000000..bb8f5c29c3d
--- /dev/null
+++ b/arch/mips/include/asm/tlbdebug.h
@@ -0,0 +1,16 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002 by Ralf Baechle
+ */
+#ifndef __ASM_TLBDEBUG_H
+#define __ASM_TLBDEBUG_H
+
+/*
+ * TLB debugging functions:
+ */
+extern void dump_tlb_all(void);
+
+#endif /* __ASM_TLBDEBUG_H */
diff --git a/arch/mips/include/asm/tlbflush.h b/arch/mips/include/asm/tlbflush.h
new file mode 100644
index 00000000000..86b21de12e9
--- /dev/null
+++ b/arch/mips/include/asm/tlbflush.h
@@ -0,0 +1,47 @@
+#ifndef __ASM_TLBFLUSH_H
+#define __ASM_TLBFLUSH_H
+
+#include <linux/mm.h>
+
+/*
+ * TLB flushing:
+ *
+ * - flush_tlb_all() flushes all processes TLB entries
+ * - flush_tlb_mm(mm) flushes the specified mm context TLB entries
+ * - flush_tlb_page(vma, vmaddr) flushes one page
+ * - flush_tlb_range(vma, start, end) flushes a range of pages
+ * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ */
+extern void local_flush_tlb_all(void);
+extern void local_flush_tlb_mm(struct mm_struct *mm);
+extern void local_flush_tlb_range(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end);
+extern void local_flush_tlb_kernel_range(unsigned long start,
+ unsigned long end);
+extern void local_flush_tlb_page(struct vm_area_struct *vma,
+ unsigned long page);
+extern void local_flush_tlb_one(unsigned long vaddr);
+
+#ifdef CONFIG_SMP
+
+extern void flush_tlb_all(void);
+extern void flush_tlb_mm(struct mm_struct *);
+extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long,
+ unsigned long);
+extern void flush_tlb_kernel_range(unsigned long, unsigned long);
+extern void flush_tlb_page(struct vm_area_struct *, unsigned long);
+extern void flush_tlb_one(unsigned long vaddr);
+
+#else /* CONFIG_SMP */
+
+#define flush_tlb_all() local_flush_tlb_all()
+#define flush_tlb_mm(mm) local_flush_tlb_mm(mm)
+#define flush_tlb_range(vma, vmaddr, end) local_flush_tlb_range(vma, vmaddr, end)
+#define flush_tlb_kernel_range(vmaddr,end) \
+ local_flush_tlb_kernel_range(vmaddr, end)
+#define flush_tlb_page(vma, page) local_flush_tlb_page(vma, page)
+#define flush_tlb_one(vaddr) local_flush_tlb_one(vaddr)
+
+#endif /* CONFIG_SMP */
+
+#endif /* __ASM_TLBFLUSH_H */
diff --git a/arch/mips/include/asm/topology.h b/arch/mips/include/asm/topology.h
new file mode 100644
index 00000000000..259145e07e9
--- /dev/null
+++ b/arch/mips/include/asm/topology.h
@@ -0,0 +1,17 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 by Ralf Baechle
+ */
+#ifndef __ASM_TOPOLOGY_H
+#define __ASM_TOPOLOGY_H
+
+#include <topology.h>
+
+#ifdef CONFIG_SMP
+#define smt_capable() (smp_num_siblings > 1)
+#endif
+
+#endif /* __ASM_TOPOLOGY_H */
diff --git a/arch/mips/include/asm/traps.h b/arch/mips/include/asm/traps.h
new file mode 100644
index 00000000000..90ff2f497c5
--- /dev/null
+++ b/arch/mips/include/asm/traps.h
@@ -0,0 +1,28 @@
+/*
+ * Trap handling definitions.
+ *
+ * Copyright (C) 2002, 2003 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_TRAPS_H
+#define _ASM_TRAPS_H
+
+/*
+ * Possible status responses for a board_be_handler backend.
+ */
+#define MIPS_BE_DISCARD 0 /* return with no action */
+#define MIPS_BE_FIXUP 1 /* return to the fixup code */
+#define MIPS_BE_FATAL 2 /* treat as an unrecoverable error */
+
+extern void (*board_be_init)(void);
+extern int (*board_be_handler)(struct pt_regs *regs, int is_fixup);
+
+extern void (*board_nmi_handler_setup)(void);
+extern void (*board_ejtag_handler_setup)(void);
+extern void (*board_bind_eic_interrupt)(int irq, int regset);
+
+#endif /* _ASM_TRAPS_H */
diff --git a/arch/mips/include/asm/txx9/boards.h b/arch/mips/include/asm/txx9/boards.h
new file mode 100644
index 00000000000..cbe9476d963
--- /dev/null
+++ b/arch/mips/include/asm/txx9/boards.h
@@ -0,0 +1,13 @@
+#ifdef CONFIG_TOSHIBA_JMR3927
+BOARD_VEC(jmr3927_vec)
+#endif
+#ifdef CONFIG_TOSHIBA_RBTX4927
+BOARD_VEC(rbtx4927_vec)
+BOARD_VEC(rbtx4937_vec)
+#endif
+#ifdef CONFIG_TOSHIBA_RBTX4938
+BOARD_VEC(rbtx4938_vec)
+#endif
+#ifdef CONFIG_TOSHIBA_RBTX4939
+BOARD_VEC(rbtx4939_vec)
+#endif
diff --git a/arch/mips/include/asm/txx9/generic.h b/arch/mips/include/asm/txx9/generic.h
new file mode 100644
index 00000000000..4316a3e5767
--- /dev/null
+++ b/arch/mips/include/asm/txx9/generic.h
@@ -0,0 +1,89 @@
+/*
+ * linux/include/asm-mips/txx9/generic.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_TXX9_GENERIC_H
+#define __ASM_TXX9_GENERIC_H
+
+#include <linux/init.h>
+#include <linux/ioport.h> /* for struct resource */
+
+extern struct resource txx9_ce_res[];
+#define TXX9_CE(n) (unsigned long)(txx9_ce_res[(n)].start)
+extern unsigned int txx9_pcode;
+extern char txx9_pcode_str[8];
+void txx9_reg_res_init(unsigned int pcode, unsigned long base,
+ unsigned long size);
+
+extern unsigned int txx9_master_clock;
+extern unsigned int txx9_cpu_clock;
+extern unsigned int txx9_gbus_clock;
+#define TXX9_IMCLK (txx9_gbus_clock / 2)
+
+extern int txx9_ccfg_toeon;
+struct uart_port;
+int early_serial_txx9_setup(struct uart_port *port);
+
+struct pci_dev;
+struct txx9_board_vec {
+ const char *system;
+ void (*prom_init)(void);
+ void (*mem_setup)(void);
+ void (*irq_setup)(void);
+ void (*time_init)(void);
+ void (*arch_init)(void);
+ void (*device_init)(void);
+#ifdef CONFIG_PCI
+ int (*pci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin);
+#endif
+};
+extern struct txx9_board_vec *txx9_board_vec;
+extern int (*txx9_irq_dispatch)(int pending);
+char *prom_getcmdline(void);
+const char *prom_getenv(const char *name);
+void txx9_wdt_init(unsigned long base);
+void txx9_wdt_now(unsigned long base);
+void txx9_spi_init(int busid, unsigned long base, int irq);
+void txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr);
+void txx9_sio_init(unsigned long baseaddr, int irq,
+ unsigned int line, unsigned int sclk, int nocts);
+void prom_putchar(char c);
+#ifdef CONFIG_EARLY_PRINTK
+extern void (*txx9_prom_putchar)(char c);
+void txx9_sio_putchar_init(unsigned long baseaddr);
+#else
+static inline void txx9_sio_putchar_init(unsigned long baseaddr)
+{
+}
+#endif
+
+struct physmap_flash_data;
+void txx9_physmap_flash_init(int no, unsigned long addr, unsigned long size,
+ const struct physmap_flash_data *pdata);
+
+/* 8 bit version of __fls(): find first bit set (returns 0..7) */
+static inline unsigned int __fls8(unsigned char x)
+{
+ int r = 7;
+
+ if (!(x & 0xf0)) {
+ r -= 4;
+ x <<= 4;
+ }
+ if (!(x & 0xc0)) {
+ r -= 2;
+ x <<= 2;
+ }
+ if (!(x & 0x80))
+ r -= 1;
+ return r;
+}
+
+void txx9_iocled_init(unsigned long baseaddr,
+ int basenum, unsigned int num, int lowactive,
+ const char *color, char **deftriggers);
+
+#endif /* __ASM_TXX9_GENERIC_H */
diff --git a/arch/mips/include/asm/txx9/jmr3927.h b/arch/mips/include/asm/txx9/jmr3927.h
new file mode 100644
index 00000000000..a409c446bf1
--- /dev/null
+++ b/arch/mips/include/asm/txx9/jmr3927.h
@@ -0,0 +1,180 @@
+/*
+ * Defines for the TJSYS JMR-TX3927
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ */
+#ifndef __ASM_TXX9_JMR3927_H
+#define __ASM_TXX9_JMR3927_H
+
+#include <asm/txx9/tx3927.h>
+#include <asm/addrspace.h>
+#include <asm/system.h>
+#include <asm/txx9irq.h>
+
+/* CS */
+#define JMR3927_ROMCE0 0x1fc00000 /* 4M */
+#define JMR3927_ROMCE1 0x1e000000 /* 4M */
+#define JMR3927_ROMCE2 0x14000000 /* 16M */
+#define JMR3927_ROMCE3 0x10000000 /* 64M */
+#define JMR3927_ROMCE5 0x1d000000 /* 4M */
+#define JMR3927_SDCS0 0x00000000 /* 32M */
+#define JMR3927_SDCS1 0x02000000 /* 32M */
+/* PCI Direct Mappings */
+
+#define JMR3927_PCIMEM 0x08000000
+#define JMR3927_PCIMEM_SIZE 0x08000000 /* 128M */
+#define JMR3927_PCIIO 0x15000000
+#define JMR3927_PCIIO_SIZE 0x01000000 /* 16M */
+
+#define JMR3927_SDRAM_SIZE 0x02000000 /* 32M */
+#define JMR3927_PORT_BASE KSEG1
+
+/* Address map (virtual address) */
+#define JMR3927_ROM0_BASE (KSEG1 + JMR3927_ROMCE0)
+#define JMR3927_ROM1_BASE (KSEG1 + JMR3927_ROMCE1)
+#define JMR3927_IOC_BASE (KSEG1 + JMR3927_ROMCE2)
+#define JMR3927_PCIMEM_BASE (KSEG1 + JMR3927_PCIMEM)
+#define JMR3927_PCIIO_BASE (KSEG1 + JMR3927_PCIIO)
+
+#define JMR3927_IOC_REV_ADDR (JMR3927_IOC_BASE + 0x00000000)
+#define JMR3927_IOC_NVRAMB_ADDR (JMR3927_IOC_BASE + 0x00010000)
+#define JMR3927_IOC_LED_ADDR (JMR3927_IOC_BASE + 0x00020000)
+#define JMR3927_IOC_DIPSW_ADDR (JMR3927_IOC_BASE + 0x00030000)
+#define JMR3927_IOC_BREV_ADDR (JMR3927_IOC_BASE + 0x00040000)
+#define JMR3927_IOC_DTR_ADDR (JMR3927_IOC_BASE + 0x00050000)
+#define JMR3927_IOC_INTS1_ADDR (JMR3927_IOC_BASE + 0x00080000)
+#define JMR3927_IOC_INTS2_ADDR (JMR3927_IOC_BASE + 0x00090000)
+#define JMR3927_IOC_INTM_ADDR (JMR3927_IOC_BASE + 0x000a0000)
+#define JMR3927_IOC_INTP_ADDR (JMR3927_IOC_BASE + 0x000b0000)
+#define JMR3927_IOC_RESET_ADDR (JMR3927_IOC_BASE + 0x000f0000)
+
+/* Flash ROM */
+#define JMR3927_FLASH_BASE (JMR3927_ROM0_BASE)
+#define JMR3927_FLASH_SIZE 0x00400000
+
+/* bits for IOC_REV/IOC_BREV (high byte) */
+#define JMR3927_IDT_MASK 0xfc
+#define JMR3927_REV_MASK 0x03
+#define JMR3927_IOC_IDT 0xe0
+
+/* bits for IOC_INTS1/IOC_INTS2/IOC_INTM/IOC_INTP (high byte) */
+#define JMR3927_IOC_INTB_PCIA 0
+#define JMR3927_IOC_INTB_PCIB 1
+#define JMR3927_IOC_INTB_PCIC 2
+#define JMR3927_IOC_INTB_PCID 3
+#define JMR3927_IOC_INTB_MODEM 4
+#define JMR3927_IOC_INTB_INT6 5
+#define JMR3927_IOC_INTB_INT7 6
+#define JMR3927_IOC_INTB_SOFT 7
+#define JMR3927_IOC_INTF_PCIA (1 << JMR3927_IOC_INTF_PCIA)
+#define JMR3927_IOC_INTF_PCIB (1 << JMR3927_IOC_INTB_PCIB)
+#define JMR3927_IOC_INTF_PCIC (1 << JMR3927_IOC_INTB_PCIC)
+#define JMR3927_IOC_INTF_PCID (1 << JMR3927_IOC_INTB_PCID)
+#define JMR3927_IOC_INTF_MODEM (1 << JMR3927_IOC_INTB_MODEM)
+#define JMR3927_IOC_INTF_INT6 (1 << JMR3927_IOC_INTB_INT6)
+#define JMR3927_IOC_INTF_INT7 (1 << JMR3927_IOC_INTB_INT7)
+#define JMR3927_IOC_INTF_SOFT (1 << JMR3927_IOC_INTB_SOFT)
+
+/* bits for IOC_RESET (high byte) */
+#define JMR3927_IOC_RESET_CPU 1
+#define JMR3927_IOC_RESET_PCI 2
+
+#if defined(__BIG_ENDIAN)
+#define jmr3927_ioc_reg_out(d, a) ((*(volatile unsigned char *)(a)) = (d))
+#define jmr3927_ioc_reg_in(a) (*(volatile unsigned char *)(a))
+#elif defined(__LITTLE_ENDIAN)
+#define jmr3927_ioc_reg_out(d, a) ((*(volatile unsigned char *)((a)^1)) = (d))
+#define jmr3927_ioc_reg_in(a) (*(volatile unsigned char *)((a)^1))
+#else
+#error "No Endian"
+#endif
+
+/* LED macro */
+#define jmr3927_led_set(n/*0-16*/) jmr3927_ioc_reg_out(~(n), JMR3927_IOC_LED_ADDR)
+
+#define jmr3927_led_and_set(n/*0-16*/) jmr3927_ioc_reg_out((~(n)) & jmr3927_ioc_reg_in(JMR3927_IOC_LED_ADDR), JMR3927_IOC_LED_ADDR)
+
+/* DIPSW4 macro */
+#define jmr3927_dipsw1() (gpio_get_value(11) == 0)
+#define jmr3927_dipsw2() (gpio_get_value(10) == 0)
+#define jmr3927_dipsw3() ((jmr3927_ioc_reg_in(JMR3927_IOC_DIPSW_ADDR) & 2) == 0)
+#define jmr3927_dipsw4() ((jmr3927_ioc_reg_in(JMR3927_IOC_DIPSW_ADDR) & 1) == 0)
+
+/*
+ * IRQ mappings
+ */
+
+/* These are the virtual IRQ numbers, we divide all IRQ's into
+ * 'spaces', the 'space' determines where and how to enable/disable
+ * that particular IRQ on an JMR machine. Add new 'spaces' as new
+ * IRQ hardware is supported.
+ */
+#define JMR3927_NR_IRQ_IRC 16 /* On-Chip IRC */
+#define JMR3927_NR_IRQ_IOC 8 /* PCI/MODEM/INT[6:7] */
+
+#define JMR3927_IRQ_IRC TXX9_IRQ_BASE
+#define JMR3927_IRQ_IOC (JMR3927_IRQ_IRC + JMR3927_NR_IRQ_IRC)
+#define JMR3927_IRQ_END (JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC)
+
+#define JMR3927_IRQ_IRC_INT0 (JMR3927_IRQ_IRC + TX3927_IR_INT0)
+#define JMR3927_IRQ_IRC_INT1 (JMR3927_IRQ_IRC + TX3927_IR_INT1)
+#define JMR3927_IRQ_IRC_INT2 (JMR3927_IRQ_IRC + TX3927_IR_INT2)
+#define JMR3927_IRQ_IRC_INT3 (JMR3927_IRQ_IRC + TX3927_IR_INT3)
+#define JMR3927_IRQ_IRC_INT4 (JMR3927_IRQ_IRC + TX3927_IR_INT4)
+#define JMR3927_IRQ_IRC_INT5 (JMR3927_IRQ_IRC + TX3927_IR_INT5)
+#define JMR3927_IRQ_IRC_SIO0 (JMR3927_IRQ_IRC + TX3927_IR_SIO0)
+#define JMR3927_IRQ_IRC_SIO1 (JMR3927_IRQ_IRC + TX3927_IR_SIO1)
+#define JMR3927_IRQ_IRC_SIO(ch) (JMR3927_IRQ_IRC + TX3927_IR_SIO(ch))
+#define JMR3927_IRQ_IRC_DMA (JMR3927_IRQ_IRC + TX3927_IR_DMA)
+#define JMR3927_IRQ_IRC_PIO (JMR3927_IRQ_IRC + TX3927_IR_PIO)
+#define JMR3927_IRQ_IRC_PCI (JMR3927_IRQ_IRC + TX3927_IR_PCI)
+#define JMR3927_IRQ_IRC_TMR(ch) (JMR3927_IRQ_IRC + TX3927_IR_TMR(ch))
+#define JMR3927_IRQ_IOC_PCIA (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIA)
+#define JMR3927_IRQ_IOC_PCIB (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIB)
+#define JMR3927_IRQ_IOC_PCIC (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIC)
+#define JMR3927_IRQ_IOC_PCID (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCID)
+#define JMR3927_IRQ_IOC_MODEM (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_MODEM)
+#define JMR3927_IRQ_IOC_INT6 (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_INT6)
+#define JMR3927_IRQ_IOC_INT7 (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_INT7)
+#define JMR3927_IRQ_IOC_SOFT (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_SOFT)
+
+/* IOC (PCI, MODEM) */
+#define JMR3927_IRQ_IOCINT JMR3927_IRQ_IRC_INT1
+/* TC35815 100M Ether (JMR-TX3912:JPW4:2-3 Short) */
+#define JMR3927_IRQ_ETHER0 JMR3927_IRQ_IRC_INT3
+
+/* Clocks */
+#define JMR3927_CORECLK 132710400 /* 132.7MHz */
+
+/*
+ * TX3927 Pin Configuration:
+ *
+ * PCFG bits Avail Dead
+ * SELSIO[1:0]:11 RXD[1:0], TXD[1:0] PIO[6:3]
+ * SELSIOC[0]:1 CTS[0], RTS[0] INT[5:4]
+ * SELSIOC[1]:0,SELDSF:0, GSDAO[0],GPCST[3] CTS[1], RTS[1],DSF,
+ * GDBGE* PIO[2:1]
+ * SELDMA[2]:1 DMAREQ[2],DMAACK[2] PIO[13:12]
+ * SELTMR[2:0]:000 TIMER[1:0]
+ * SELCS:0,SELDMA[1]:0 PIO[11;10] SDCS_CE[7:6],
+ * DMAREQ[1],DMAACK[1]
+ * SELDMA[0]:1 DMAREQ[0],DMAACK[0] PIO[9:8]
+ * SELDMA[3]:1 DMAREQ[3],DMAACK[3] PIO[15:14]
+ * SELDONE:1 DMADONE PIO[7]
+ *
+ * Usable pins are:
+ * RXD[1;0],TXD[1:0],CTS[0],RTS[0],
+ * DMAREQ[0,2,3],DMAACK[0,2,3],DMADONE,PIO[0,10,11]
+ * INT[3:0]
+ */
+
+void jmr3927_prom_init(void);
+void jmr3927_irq_setup(void);
+struct pci_dev;
+int jmr3927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+
+#endif /* __ASM_TXX9_JMR3927_H */
diff --git a/arch/mips/include/asm/txx9/pci.h b/arch/mips/include/asm/txx9/pci.h
new file mode 100644
index 00000000000..3d32529060a
--- /dev/null
+++ b/arch/mips/include/asm/txx9/pci.h
@@ -0,0 +1,39 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_TXX9_PCI_H
+#define __ASM_TXX9_PCI_H
+
+#include <linux/pci.h>
+
+extern struct pci_controller txx9_primary_pcic;
+struct pci_controller *
+txx9_alloc_pci_controller(struct pci_controller *pcic,
+ unsigned long mem_base, unsigned long mem_size,
+ unsigned long io_base, unsigned long io_size);
+
+int txx9_pci66_check(struct pci_controller *hose, int top_bus,
+ int current_bus);
+extern int txx9_pci_mem_high __initdata;
+
+extern int txx9_pci_option;
+#define TXX9_PCI_OPT_PICMG 0x0002
+#define TXX9_PCI_OPT_CLK_33 0x0008
+#define TXX9_PCI_OPT_CLK_66 0x0010
+#define TXX9_PCI_OPT_CLK_MASK \
+ (TXX9_PCI_OPT_CLK_33 | TXX9_PCI_OPT_CLK_66)
+#define TXX9_PCI_OPT_CLK_AUTO TXX9_PCI_OPT_CLK_MASK
+
+enum txx9_pci_err_action {
+ TXX9_PCI_ERR_REPORT,
+ TXX9_PCI_ERR_IGNORE,
+ TXX9_PCI_ERR_PANIC,
+};
+extern enum txx9_pci_err_action txx9_pci_err_action;
+
+extern char * (*txx9_board_pcibios_setup)(char *str);
+char *txx9_pcibios_setup(char *str);
+
+#endif /* __ASM_TXX9_PCI_H */
diff --git a/arch/mips/include/asm/txx9/rbtx4927.h b/arch/mips/include/asm/txx9/rbtx4927.h
new file mode 100644
index 00000000000..b2adab3d1ac
--- /dev/null
+++ b/arch/mips/include/asm/txx9/rbtx4927.h
@@ -0,0 +1,92 @@
+/*
+ * Author: MontaVista Software, Inc.
+ * source@mvista.com
+ *
+ * Copyright 2001-2002 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_TXX9_RBTX4927_H
+#define __ASM_TXX9_RBTX4927_H
+
+#include <asm/txx9/tx4927.h>
+
+#define RBTX4927_PCIMEM 0x08000000
+#define RBTX4927_PCIMEM_SIZE 0x08000000
+#define RBTX4927_PCIIO 0x16000000
+#define RBTX4927_PCIIO_SIZE 0x01000000
+
+#define RBTX4927_LED_ADDR (IO_BASE + TXX9_CE(2) + 0x00001000)
+#define RBTX4927_IMASK_ADDR (IO_BASE + TXX9_CE(2) + 0x00002000)
+#define RBTX4927_IMSTAT_ADDR (IO_BASE + TXX9_CE(2) + 0x00002006)
+#define RBTX4927_SOFTINT_ADDR (IO_BASE + TXX9_CE(2) + 0x00003000)
+#define RBTX4927_SOFTRESET_ADDR (IO_BASE + TXX9_CE(2) + 0x0000f000)
+#define RBTX4927_SOFTRESETLOCK_ADDR (IO_BASE + TXX9_CE(2) + 0x0000f002)
+#define RBTX4927_PCIRESET_ADDR (IO_BASE + TXX9_CE(2) + 0x0000f006)
+#define RBTX4927_BRAMRTC_BASE (IO_BASE + TXX9_CE(2) + 0x00010000)
+#define RBTX4927_ETHER_BASE (IO_BASE + TXX9_CE(2) + 0x00020000)
+
+/* Ethernet port address */
+#define RBTX4927_ETHER_ADDR (RBTX4927_ETHER_BASE + 0x280)
+
+#define rbtx4927_imask_addr ((__u8 __iomem *)RBTX4927_IMASK_ADDR)
+#define rbtx4927_imstat_addr ((__u8 __iomem *)RBTX4927_IMSTAT_ADDR)
+#define rbtx4927_softint_addr ((__u8 __iomem *)RBTX4927_SOFTINT_ADDR)
+#define rbtx4927_softreset_addr ((__u8 __iomem *)RBTX4927_SOFTRESET_ADDR)
+#define rbtx4927_softresetlock_addr \
+ ((__u8 __iomem *)RBTX4927_SOFTRESETLOCK_ADDR)
+#define rbtx4927_pcireset_addr ((__u8 __iomem *)RBTX4927_PCIRESET_ADDR)
+
+/* bits for ISTAT/IMASK/IMSTAT */
+#define RBTX4927_INTB_PCID 0
+#define RBTX4927_INTB_PCIC 1
+#define RBTX4927_INTB_PCIB 2
+#define RBTX4927_INTB_PCIA 3
+#define RBTX4927_INTF_PCID (1 << RBTX4927_INTB_PCID)
+#define RBTX4927_INTF_PCIC (1 << RBTX4927_INTB_PCIC)
+#define RBTX4927_INTF_PCIB (1 << RBTX4927_INTB_PCIB)
+#define RBTX4927_INTF_PCIA (1 << RBTX4927_INTB_PCIA)
+
+#define RBTX4927_NR_IRQ_IOC 8 /* IOC */
+
+#define RBTX4927_IRQ_IOC (TXX9_IRQ_BASE + TX4927_NUM_IR)
+#define RBTX4927_IRQ_IOC_PCID (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCID)
+#define RBTX4927_IRQ_IOC_PCIC (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIC)
+#define RBTX4927_IRQ_IOC_PCIB (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIB)
+#define RBTX4927_IRQ_IOC_PCIA (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIA)
+
+#define RBTX4927_IRQ_IOCINT (TXX9_IRQ_BASE + TX4927_IR_INT(1))
+
+#ifdef CONFIG_PCI
+#define RBTX4927_ISA_IO_OFFSET RBTX4927_PCIIO
+#else
+#define RBTX4927_ISA_IO_OFFSET 0
+#endif
+
+#define RBTX4927_RTL_8019_BASE (RBTX4927_ETHER_ADDR - mips_io_port_base)
+#define RBTX4927_RTL_8019_IRQ (TXX9_IRQ_BASE + TX4927_IR_INT(3))
+
+void rbtx4927_prom_init(void);
+void rbtx4927_irq_setup(void);
+struct pci_dev;
+int rbtx4927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+
+#endif /* __ASM_TXX9_RBTX4927_H */
diff --git a/arch/mips/include/asm/txx9/rbtx4938.h b/arch/mips/include/asm/txx9/rbtx4938.h
new file mode 100644
index 00000000000..9f0441a2812
--- /dev/null
+++ b/arch/mips/include/asm/txx9/rbtx4938.h
@@ -0,0 +1,145 @@
+/*
+ * Definitions for TX4937/TX4938
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#ifndef __ASM_TXX9_RBTX4938_H
+#define __ASM_TXX9_RBTX4938_H
+
+#include <asm/addrspace.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9/tx4938.h>
+
+/* Address map */
+#define RBTX4938_FPGA_REG_ADDR (IO_BASE + TXX9_CE(2) + 0x00000000)
+#define RBTX4938_FPGA_REV_ADDR (IO_BASE + TXX9_CE(2) + 0x00000002)
+#define RBTX4938_CONFIG1_ADDR (IO_BASE + TXX9_CE(2) + 0x00000004)
+#define RBTX4938_CONFIG2_ADDR (IO_BASE + TXX9_CE(2) + 0x00000006)
+#define RBTX4938_CONFIG3_ADDR (IO_BASE + TXX9_CE(2) + 0x00000008)
+#define RBTX4938_LED_ADDR (IO_BASE + TXX9_CE(2) + 0x00001000)
+#define RBTX4938_DIPSW_ADDR (IO_BASE + TXX9_CE(2) + 0x00001002)
+#define RBTX4938_BDIPSW_ADDR (IO_BASE + TXX9_CE(2) + 0x00001004)
+#define RBTX4938_IMASK_ADDR (IO_BASE + TXX9_CE(2) + 0x00002000)
+#define RBTX4938_IMASK2_ADDR (IO_BASE + TXX9_CE(2) + 0x00002002)
+#define RBTX4938_INTPOL_ADDR (IO_BASE + TXX9_CE(2) + 0x00002004)
+#define RBTX4938_ISTAT_ADDR (IO_BASE + TXX9_CE(2) + 0x00002006)
+#define RBTX4938_ISTAT2_ADDR (IO_BASE + TXX9_CE(2) + 0x00002008)
+#define RBTX4938_IMSTAT_ADDR (IO_BASE + TXX9_CE(2) + 0x0000200a)
+#define RBTX4938_IMSTAT2_ADDR (IO_BASE + TXX9_CE(2) + 0x0000200c)
+#define RBTX4938_SOFTINT_ADDR (IO_BASE + TXX9_CE(2) + 0x00003000)
+#define RBTX4938_PIOSEL_ADDR (IO_BASE + TXX9_CE(2) + 0x00005000)
+#define RBTX4938_SPICS_ADDR (IO_BASE + TXX9_CE(2) + 0x00005002)
+#define RBTX4938_SFPWR_ADDR (IO_BASE + TXX9_CE(2) + 0x00005008)
+#define RBTX4938_SFVOL_ADDR (IO_BASE + TXX9_CE(2) + 0x0000500a)
+#define RBTX4938_SOFTRESET_ADDR (IO_BASE + TXX9_CE(2) + 0x00007000)
+#define RBTX4938_SOFTRESETLOCK_ADDR (IO_BASE + TXX9_CE(2) + 0x00007002)
+#define RBTX4938_PCIRESET_ADDR (IO_BASE + TXX9_CE(2) + 0x00007004)
+#define RBTX4938_ETHER_BASE (IO_BASE + TXX9_CE(2) + 0x00020000)
+
+/* Ethernet port address (Jumperless Mode (W12:Open)) */
+#define RBTX4938_ETHER_ADDR (RBTX4938_ETHER_BASE + 0x280)
+
+/* bits for ISTAT/IMASK/IMSTAT */
+#define RBTX4938_INTB_PCID 0
+#define RBTX4938_INTB_PCIC 1
+#define RBTX4938_INTB_PCIB 2
+#define RBTX4938_INTB_PCIA 3
+#define RBTX4938_INTB_RTC 4
+#define RBTX4938_INTB_ATA 5
+#define RBTX4938_INTB_MODEM 6
+#define RBTX4938_INTB_SWINT 7
+#define RBTX4938_INTF_PCID (1 << RBTX4938_INTB_PCID)
+#define RBTX4938_INTF_PCIC (1 << RBTX4938_INTB_PCIC)
+#define RBTX4938_INTF_PCIB (1 << RBTX4938_INTB_PCIB)
+#define RBTX4938_INTF_PCIA (1 << RBTX4938_INTB_PCIA)
+#define RBTX4938_INTF_RTC (1 << RBTX4938_INTB_RTC)
+#define RBTX4938_INTF_ATA (1 << RBTX4938_INTB_ATA)
+#define RBTX4938_INTF_MODEM (1 << RBTX4938_INTB_MODEM)
+#define RBTX4938_INTF_SWINT (1 << RBTX4938_INTB_SWINT)
+
+#define rbtx4938_fpga_rev_addr ((__u8 __iomem *)RBTX4938_FPGA_REV_ADDR)
+#define rbtx4938_led_addr ((__u8 __iomem *)RBTX4938_LED_ADDR)
+#define rbtx4938_dipsw_addr ((__u8 __iomem *)RBTX4938_DIPSW_ADDR)
+#define rbtx4938_bdipsw_addr ((__u8 __iomem *)RBTX4938_BDIPSW_ADDR)
+#define rbtx4938_imask_addr ((__u8 __iomem *)RBTX4938_IMASK_ADDR)
+#define rbtx4938_imask2_addr ((__u8 __iomem *)RBTX4938_IMASK2_ADDR)
+#define rbtx4938_intpol_addr ((__u8 __iomem *)RBTX4938_INTPOL_ADDR)
+#define rbtx4938_istat_addr ((__u8 __iomem *)RBTX4938_ISTAT_ADDR)
+#define rbtx4938_istat2_addr ((__u8 __iomem *)RBTX4938_ISTAT2_ADDR)
+#define rbtx4938_imstat_addr ((__u8 __iomem *)RBTX4938_IMSTAT_ADDR)
+#define rbtx4938_imstat2_addr ((__u8 __iomem *)RBTX4938_IMSTAT2_ADDR)
+#define rbtx4938_softint_addr ((__u8 __iomem *)RBTX4938_SOFTINT_ADDR)
+#define rbtx4938_piosel_addr ((__u8 __iomem *)RBTX4938_PIOSEL_ADDR)
+#define rbtx4938_spics_addr ((__u8 __iomem *)RBTX4938_SPICS_ADDR)
+#define rbtx4938_sfpwr_addr ((__u8 __iomem *)RBTX4938_SFPWR_ADDR)
+#define rbtx4938_sfvol_addr ((__u8 __iomem *)RBTX4938_SFVOL_ADDR)
+#define rbtx4938_softreset_addr ((__u8 __iomem *)RBTX4938_SOFTRESET_ADDR)
+#define rbtx4938_softresetlock_addr \
+ ((__u8 __iomem *)RBTX4938_SOFTRESETLOCK_ADDR)
+#define rbtx4938_pcireset_addr ((__u8 __iomem *)RBTX4938_PCIRESET_ADDR)
+
+/*
+ * IRQ mappings
+ */
+
+#define RBTX4938_SOFT_INT0 0 /* not used */
+#define RBTX4938_SOFT_INT1 1 /* not used */
+#define RBTX4938_IRC_INT 2
+#define RBTX4938_TIMER_INT 7
+
+/* These are the virtual IRQ numbers, we divide all IRQ's into
+ * 'spaces', the 'space' determines where and how to enable/disable
+ * that particular IRQ on an RBTX4938 machine. Add new 'spaces' as new
+ * IRQ hardware is supported.
+ */
+#define RBTX4938_NR_IRQ_IOC 8
+
+#define RBTX4938_IRQ_IRC TXX9_IRQ_BASE
+#define RBTX4938_IRQ_IOC (TXX9_IRQ_BASE + TX4938_NUM_IR)
+#define RBTX4938_IRQ_END (RBTX4938_IRQ_IOC + RBTX4938_NR_IRQ_IOC)
+
+#define RBTX4938_IRQ_IRC_ECCERR (RBTX4938_IRQ_IRC + TX4938_IR_ECCERR)
+#define RBTX4938_IRQ_IRC_WTOERR (RBTX4938_IRQ_IRC + TX4938_IR_WTOERR)
+#define RBTX4938_IRQ_IRC_INT(n) (RBTX4938_IRQ_IRC + TX4938_IR_INT(n))
+#define RBTX4938_IRQ_IRC_SIO(n) (RBTX4938_IRQ_IRC + TX4938_IR_SIO(n))
+#define RBTX4938_IRQ_IRC_DMA(ch, n) (RBTX4938_IRQ_IRC + TX4938_IR_DMA(ch, n))
+#define RBTX4938_IRQ_IRC_PIO (RBTX4938_IRQ_IRC + TX4938_IR_PIO)
+#define RBTX4938_IRQ_IRC_PDMAC (RBTX4938_IRQ_IRC + TX4938_IR_PDMAC)
+#define RBTX4938_IRQ_IRC_PCIC (RBTX4938_IRQ_IRC + TX4938_IR_PCIC)
+#define RBTX4938_IRQ_IRC_TMR(n) (RBTX4938_IRQ_IRC + TX4938_IR_TMR(n))
+#define RBTX4938_IRQ_IRC_NDFMC (RBTX4938_IRQ_IRC + TX4938_IR_NDFMC)
+#define RBTX4938_IRQ_IRC_PCIERR (RBTX4938_IRQ_IRC + TX4938_IR_PCIERR)
+#define RBTX4938_IRQ_IRC_PCIPME (RBTX4938_IRQ_IRC + TX4938_IR_PCIPME)
+#define RBTX4938_IRQ_IRC_ACLC (RBTX4938_IRQ_IRC + TX4938_IR_ACLC)
+#define RBTX4938_IRQ_IRC_ACLCPME (RBTX4938_IRQ_IRC + TX4938_IR_ACLCPME)
+#define RBTX4938_IRQ_IRC_PCIC1 (RBTX4938_IRQ_IRC + TX4938_IR_PCIC1)
+#define RBTX4938_IRQ_IRC_SPI (RBTX4938_IRQ_IRC + TX4938_IR_SPI)
+#define RBTX4938_IRQ_IOC_PCID (RBTX4938_IRQ_IOC + RBTX4938_INTB_PCID)
+#define RBTX4938_IRQ_IOC_PCIC (RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIC)
+#define RBTX4938_IRQ_IOC_PCIB (RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIB)
+#define RBTX4938_IRQ_IOC_PCIA (RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIA)
+#define RBTX4938_IRQ_IOC_RTC (RBTX4938_IRQ_IOC + RBTX4938_INTB_RTC)
+#define RBTX4938_IRQ_IOC_ATA (RBTX4938_IRQ_IOC + RBTX4938_INTB_ATA)
+#define RBTX4938_IRQ_IOC_MODEM (RBTX4938_IRQ_IOC + RBTX4938_INTB_MODEM)
+#define RBTX4938_IRQ_IOC_SWINT (RBTX4938_IRQ_IOC + RBTX4938_INTB_SWINT)
+
+
+/* IOC (PCI, etc) */
+#define RBTX4938_IRQ_IOCINT (TXX9_IRQ_BASE + TX4938_IR_INT(0))
+/* Onboard 10M Ether */
+#define RBTX4938_IRQ_ETHER (TXX9_IRQ_BASE + TX4938_IR_INT(1))
+
+#define RBTX4938_RTL_8019_BASE (RBTX4938_ETHER_ADDR - mips_io_port_base)
+#define RBTX4938_RTL_8019_IRQ (RBTX4938_IRQ_ETHER)
+
+void rbtx4938_prom_init(void);
+void rbtx4938_irq_setup(void);
+struct pci_dev;
+int rbtx4938_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+
+#endif /* __ASM_TXX9_RBTX4938_H */
diff --git a/arch/mips/include/asm/txx9/rbtx4939.h b/arch/mips/include/asm/txx9/rbtx4939.h
new file mode 100644
index 00000000000..1acf428c0b4
--- /dev/null
+++ b/arch/mips/include/asm/txx9/rbtx4939.h
@@ -0,0 +1,133 @@
+/*
+ * Definitions for RBTX4939
+ *
+ * (C) Copyright TOSHIBA CORPORATION 2005-2006
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_TXX9_RBTX4939_H
+#define __ASM_TXX9_RBTX4939_H
+
+#include <asm/addrspace.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/tx4939.h>
+
+/* Address map */
+#define RBTX4939_IOC_REG_ADDR (IO_BASE + TXX9_CE(1) + 0x00000000)
+#define RBTX4939_BOARD_REV_ADDR (IO_BASE + TXX9_CE(1) + 0x00000000)
+#define RBTX4939_IOC_REV_ADDR (IO_BASE + TXX9_CE(1) + 0x00000002)
+#define RBTX4939_CONFIG1_ADDR (IO_BASE + TXX9_CE(1) + 0x00000004)
+#define RBTX4939_CONFIG2_ADDR (IO_BASE + TXX9_CE(1) + 0x00000006)
+#define RBTX4939_CONFIG3_ADDR (IO_BASE + TXX9_CE(1) + 0x00000008)
+#define RBTX4939_CONFIG4_ADDR (IO_BASE + TXX9_CE(1) + 0x0000000a)
+#define RBTX4939_USTAT_ADDR (IO_BASE + TXX9_CE(1) + 0x00001000)
+#define RBTX4939_UDIPSW_ADDR (IO_BASE + TXX9_CE(1) + 0x00001002)
+#define RBTX4939_BDIPSW_ADDR (IO_BASE + TXX9_CE(1) + 0x00001004)
+#define RBTX4939_IEN_ADDR (IO_BASE + TXX9_CE(1) + 0x00002000)
+#define RBTX4939_IPOL_ADDR (IO_BASE + TXX9_CE(1) + 0x00002002)
+#define RBTX4939_IFAC1_ADDR (IO_BASE + TXX9_CE(1) + 0x00002004)
+#define RBTX4939_IFAC2_ADDR (IO_BASE + TXX9_CE(1) + 0x00002006)
+#define RBTX4939_SOFTINT_ADDR (IO_BASE + TXX9_CE(1) + 0x00003000)
+#define RBTX4939_ISASTAT_ADDR (IO_BASE + TXX9_CE(1) + 0x00004000)
+#define RBTX4939_PCISTAT_ADDR (IO_BASE + TXX9_CE(1) + 0x00004002)
+#define RBTX4939_ROME_ADDR (IO_BASE + TXX9_CE(1) + 0x00004004)
+#define RBTX4939_SPICS_ADDR (IO_BASE + TXX9_CE(1) + 0x00004006)
+#define RBTX4939_AUDI_ADDR (IO_BASE + TXX9_CE(1) + 0x00004008)
+#define RBTX4939_ISAGPIO_ADDR (IO_BASE + TXX9_CE(1) + 0x0000400a)
+#define RBTX4939_PE1_ADDR (IO_BASE + TXX9_CE(1) + 0x00005000)
+#define RBTX4939_PE2_ADDR (IO_BASE + TXX9_CE(1) + 0x00005002)
+#define RBTX4939_PE3_ADDR (IO_BASE + TXX9_CE(1) + 0x00005004)
+#define RBTX4939_VP_ADDR (IO_BASE + TXX9_CE(1) + 0x00005006)
+#define RBTX4939_VPRESET_ADDR (IO_BASE + TXX9_CE(1) + 0x00005008)
+#define RBTX4939_VPSOUT_ADDR (IO_BASE + TXX9_CE(1) + 0x0000500a)
+#define RBTX4939_VPSIN_ADDR (IO_BASE + TXX9_CE(1) + 0x0000500c)
+#define RBTX4939_7SEG_ADDR(s, ch) \
+ (IO_BASE + TXX9_CE(1) + 0x00006000 + (s) * 16 + ((ch) & 3) * 2)
+#define RBTX4939_SOFTRESET_ADDR (IO_BASE + TXX9_CE(1) + 0x00007000)
+#define RBTX4939_RESETEN_ADDR (IO_BASE + TXX9_CE(1) + 0x00007002)
+#define RBTX4939_RESETSTAT_ADDR (IO_BASE + TXX9_CE(1) + 0x00007004)
+#define RBTX4939_ETHER_BASE (IO_BASE + TXX9_CE(1) + 0x00020000)
+
+/* Ethernet port address */
+#define RBTX4939_ETHER_ADDR (RBTX4939_ETHER_BASE + 0x300)
+
+/* bits for IEN/IPOL/IFAC */
+#define RBTX4938_INTB_ISA0 0
+#define RBTX4938_INTB_ISA11 1
+#define RBTX4938_INTB_ISA12 2
+#define RBTX4938_INTB_ISA15 3
+#define RBTX4938_INTB_I2S 4
+#define RBTX4938_INTB_SW 5
+#define RBTX4938_INTF_ISA0 (1 << RBTX4938_INTB_ISA0)
+#define RBTX4938_INTF_ISA11 (1 << RBTX4938_INTB_ISA11)
+#define RBTX4938_INTF_ISA12 (1 << RBTX4938_INTB_ISA12)
+#define RBTX4938_INTF_ISA15 (1 << RBTX4938_INTB_ISA15)
+#define RBTX4938_INTF_I2S (1 << RBTX4938_INTB_I2S)
+#define RBTX4938_INTF_SW (1 << RBTX4938_INTB_SW)
+
+/* bits for PE1,PE2,PE3 */
+#define RBTX4939_PE1_ATA(ch) (0x01 << (ch))
+#define RBTX4939_PE1_RMII(ch) (0x04 << (ch))
+#define RBTX4939_PE2_SIO0 0x01
+#define RBTX4939_PE2_SIO2 0x02
+#define RBTX4939_PE2_SIO3 0x04
+#define RBTX4939_PE2_CIR 0x08
+#define RBTX4939_PE2_SPI 0x10
+#define RBTX4939_PE2_GPIO 0x20
+#define RBTX4939_PE3_VP 0x01
+#define RBTX4939_PE3_VP_P 0x02
+#define RBTX4939_PE3_VP_S 0x04
+
+#define rbtx4939_board_rev_addr ((u8 __iomem *)RBTX4939_BOARD_REV_ADDR)
+#define rbtx4939_ioc_rev_addr ((u8 __iomem *)RBTX4939_IOC_REV_ADDR)
+#define rbtx4939_config1_addr ((u8 __iomem *)RBTX4939_CONFIG1_ADDR)
+#define rbtx4939_config2_addr ((u8 __iomem *)RBTX4939_CONFIG2_ADDR)
+#define rbtx4939_config3_addr ((u8 __iomem *)RBTX4939_CONFIG3_ADDR)
+#define rbtx4939_config4_addr ((u8 __iomem *)RBTX4939_CONFIG4_ADDR)
+#define rbtx4939_ustat_addr ((u8 __iomem *)RBTX4939_USTAT_ADDR)
+#define rbtx4939_udipsw_addr ((u8 __iomem *)RBTX4939_UDIPSW_ADDR)
+#define rbtx4939_bdipsw_addr ((u8 __iomem *)RBTX4939_BDIPSW_ADDR)
+#define rbtx4939_ien_addr ((u8 __iomem *)RBTX4939_IEN_ADDR)
+#define rbtx4939_ipol_addr ((u8 __iomem *)RBTX4939_IPOL_ADDR)
+#define rbtx4939_ifac1_addr ((u8 __iomem *)RBTX4939_IFAC1_ADDR)
+#define rbtx4939_ifac2_addr ((u8 __iomem *)RBTX4939_IFAC2_ADDR)
+#define rbtx4939_softint_addr ((u8 __iomem *)RBTX4939_SOFTINT_ADDR)
+#define rbtx4939_isastat_addr ((u8 __iomem *)RBTX4939_ISASTAT_ADDR)
+#define rbtx4939_pcistat_addr ((u8 __iomem *)RBTX4939_PCISTAT_ADDR)
+#define rbtx4939_rome_addr ((u8 __iomem *)RBTX4939_ROME_ADDR)
+#define rbtx4939_spics_addr ((u8 __iomem *)RBTX4939_SPICS_ADDR)
+#define rbtx4939_audi_addr ((u8 __iomem *)RBTX4939_AUDI_ADDR)
+#define rbtx4939_isagpio_addr ((u8 __iomem *)RBTX4939_ISAGPIO_ADDR)
+#define rbtx4939_pe1_addr ((u8 __iomem *)RBTX4939_PE1_ADDR)
+#define rbtx4939_pe2_addr ((u8 __iomem *)RBTX4939_PE2_ADDR)
+#define rbtx4939_pe3_addr ((u8 __iomem *)RBTX4939_PE3_ADDR)
+#define rbtx4939_vp_addr ((u8 __iomem *)RBTX4939_VP_ADDR)
+#define rbtx4939_vpreset_addr ((u8 __iomem *)RBTX4939_VPRESET_ADDR)
+#define rbtx4939_vpsout_addr ((u8 __iomem *)RBTX4939_VPSOUT_ADDR)
+#define rbtx4939_vpsin_addr ((u8 __iomem *)RBTX4939_VPSIN_ADDR)
+#define rbtx4939_7seg_addr(s, ch) \
+ ((u8 __iomem *)RBTX4939_7SEG_ADDR(s, ch))
+#define rbtx4939_softreset_addr ((u8 __iomem *)RBTX4939_SOFTRESET_ADDR)
+#define rbtx4939_reseten_addr ((u8 __iomem *)RBTX4939_RESETEN_ADDR)
+#define rbtx4939_resetstat_addr ((u8 __iomem *)RBTX4939_RESETSTAT_ADDR)
+
+/*
+ * IRQ mappings
+ */
+#define RBTX4939_NR_IRQ_IOC 8
+
+#define RBTX4939_IRQ_IOC (TXX9_IRQ_BASE + TX4939_NUM_IR)
+#define RBTX4939_IRQ_END (RBTX4939_IRQ_IOC + RBTX4939_NR_IRQ_IOC)
+
+/* IOC (ISA, etc) */
+#define RBTX4939_IRQ_IOCINT (TXX9_IRQ_BASE + TX4939_IR_INT(0))
+/* Onboard 10M Ether */
+#define RBTX4939_IRQ_ETHER (TXX9_IRQ_BASE + TX4939_IR_INT(1))
+
+void rbtx4939_prom_init(void);
+void rbtx4939_irq_setup(void);
+
+#endif /* __ASM_TXX9_RBTX4939_H */
diff --git a/arch/mips/include/asm/txx9/smsc_fdc37m81x.h b/arch/mips/include/asm/txx9/smsc_fdc37m81x.h
new file mode 100644
index 00000000000..d1d6332b4ca
--- /dev/null
+++ b/arch/mips/include/asm/txx9/smsc_fdc37m81x.h
@@ -0,0 +1,68 @@
+/*
+ * Interface for smsc fdc48m81x Super IO chip
+ *
+ * Author: MontaVista Software, Inc. source@mvista.com
+ *
+ * 2001-2003 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Copyright (C) 2004 MontaVista Software Inc.
+ * Manish Lachwani, mlachwani@mvista.com
+ */
+
+#ifndef _SMSC_FDC37M81X_H_
+#define _SMSC_FDC37M81X_H_
+
+/* Common Registers */
+#define SMSC_FDC37M81X_CONFIG_INDEX 0x00
+#define SMSC_FDC37M81X_CONFIG_DATA 0x01
+#define SMSC_FDC37M81X_CONF 0x02
+#define SMSC_FDC37M81X_INDEX 0x03
+#define SMSC_FDC37M81X_DNUM 0x07
+#define SMSC_FDC37M81X_DID 0x20
+#define SMSC_FDC37M81X_DREV 0x21
+#define SMSC_FDC37M81X_PCNT 0x22
+#define SMSC_FDC37M81X_PMGT 0x23
+#define SMSC_FDC37M81X_OSC 0x24
+#define SMSC_FDC37M81X_CONFPA0 0x26
+#define SMSC_FDC37M81X_CONFPA1 0x27
+#define SMSC_FDC37M81X_TEST4 0x2B
+#define SMSC_FDC37M81X_TEST5 0x2C
+#define SMSC_FDC37M81X_TEST1 0x2D
+#define SMSC_FDC37M81X_TEST2 0x2E
+#define SMSC_FDC37M81X_TEST3 0x2F
+
+/* Logical device numbers */
+#define SMSC_FDC37M81X_FDD 0x00
+#define SMSC_FDC37M81X_PARALLEL 0x03
+#define SMSC_FDC37M81X_SERIAL1 0x04
+#define SMSC_FDC37M81X_SERIAL2 0x05
+#define SMSC_FDC37M81X_KBD 0x07
+#define SMSC_FDC37M81X_AUXIO 0x08
+#define SMSC_FDC37M81X_NONE 0xff
+
+/* Logical device Config Registers */
+#define SMSC_FDC37M81X_ACTIVE 0x30
+#define SMSC_FDC37M81X_BASEADDR0 0x60
+#define SMSC_FDC37M81X_BASEADDR1 0x61
+#define SMSC_FDC37M81X_INT 0x70
+#define SMSC_FDC37M81X_INT2 0x72
+#define SMSC_FDC37M81X_LDCR_F0 0xF0
+
+/* Chip Config Values */
+#define SMSC_FDC37M81X_CONFIG_ENTER 0x55
+#define SMSC_FDC37M81X_CONFIG_EXIT 0xaa
+#define SMSC_FDC37M81X_CHIP_ID 0x4d
+
+unsigned long smsc_fdc37m81x_init(unsigned long port);
+
+void smsc_fdc37m81x_config_beg(void);
+
+void smsc_fdc37m81x_config_end(void);
+
+u8 smsc_fdc37m81x_config_get(u8 reg);
+void smsc_fdc37m81x_config_set(u8 reg, u8 val);
+
+#endif
diff --git a/arch/mips/include/asm/txx9/spi.h b/arch/mips/include/asm/txx9/spi.h
new file mode 100644
index 00000000000..0d727f35455
--- /dev/null
+++ b/arch/mips/include/asm/txx9/spi.h
@@ -0,0 +1,34 @@
+/*
+ * Definitions for TX4937/TX4938 SPI
+ *
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#ifndef __ASM_TXX9_SPI_H
+#define __ASM_TXX9_SPI_H
+
+#include <linux/errno.h>
+
+#ifdef CONFIG_SPI
+int spi_eeprom_register(int busid, int chipid, int size);
+int spi_eeprom_read(int busid, int chipid,
+ int address, unsigned char *buf, int len);
+#else
+static inline int spi_eeprom_register(int busid, int chipid, int size)
+{
+ return -ENODEV;
+}
+static inline int spi_eeprom_read(int busid, int chipid,
+ int address, unsigned char *buf, int len)
+{
+ return -ENODEV;
+}
+#endif
+
+#endif /* __ASM_TXX9_SPI_H */
diff --git a/arch/mips/include/asm/txx9/tx3927.h b/arch/mips/include/asm/txx9/tx3927.h
new file mode 100644
index 00000000000..dc30c8d4206
--- /dev/null
+++ b/arch/mips/include/asm/txx9/tx3927.h
@@ -0,0 +1,341 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000 Toshiba Corporation
+ */
+#ifndef __ASM_TXX9_TX3927_H
+#define __ASM_TXX9_TX3927_H
+
+#define TX3927_REG_BASE 0xfffe0000UL
+#define TX3927_REG_SIZE 0x00010000
+#define TX3927_SDRAMC_REG (TX3927_REG_BASE + 0x8000)
+#define TX3927_ROMC_REG (TX3927_REG_BASE + 0x9000)
+#define TX3927_DMA_REG (TX3927_REG_BASE + 0xb000)
+#define TX3927_IRC_REG (TX3927_REG_BASE + 0xc000)
+#define TX3927_PCIC_REG (TX3927_REG_BASE + 0xd000)
+#define TX3927_CCFG_REG (TX3927_REG_BASE + 0xe000)
+#define TX3927_NR_TMR 3
+#define TX3927_TMR_REG(ch) (TX3927_REG_BASE + 0xf000 + (ch) * 0x100)
+#define TX3927_NR_SIO 2
+#define TX3927_SIO_REG(ch) (TX3927_REG_BASE + 0xf300 + (ch) * 0x100)
+#define TX3927_PIO_REG (TX3927_REG_BASE + 0xf500)
+
+struct tx3927_sdramc_reg {
+ volatile unsigned long cr[8];
+ volatile unsigned long tr[3];
+ volatile unsigned long cmd;
+ volatile unsigned long smrs[2];
+};
+
+struct tx3927_romc_reg {
+ volatile unsigned long cr[8];
+};
+
+struct tx3927_dma_reg {
+ struct tx3927_dma_ch_reg {
+ volatile unsigned long cha;
+ volatile unsigned long sar;
+ volatile unsigned long dar;
+ volatile unsigned long cntr;
+ volatile unsigned long sair;
+ volatile unsigned long dair;
+ volatile unsigned long ccr;
+ volatile unsigned long csr;
+ } ch[4];
+ volatile unsigned long dbr[8];
+ volatile unsigned long tdhr;
+ volatile unsigned long mcr;
+ volatile unsigned long unused0;
+};
+
+#include <asm/byteorder.h>
+
+#ifdef __BIG_ENDIAN
+#define endian_def_s2(e1, e2) \
+ volatile unsigned short e1, e2
+#define endian_def_sb2(e1, e2, e3) \
+ volatile unsigned short e1;volatile unsigned char e2, e3
+#define endian_def_b2s(e1, e2, e3) \
+ volatile unsigned char e1, e2;volatile unsigned short e3
+#define endian_def_b4(e1, e2, e3, e4) \
+ volatile unsigned char e1, e2, e3, e4
+#else
+#define endian_def_s2(e1, e2) \
+ volatile unsigned short e2, e1
+#define endian_def_sb2(e1, e2, e3) \
+ volatile unsigned char e3, e2;volatile unsigned short e1
+#define endian_def_b2s(e1, e2, e3) \
+ volatile unsigned short e3;volatile unsigned char e2, e1
+#define endian_def_b4(e1, e2, e3, e4) \
+ volatile unsigned char e4, e3, e2, e1
+#endif
+
+struct tx3927_pcic_reg {
+ endian_def_s2(did, vid);
+ endian_def_s2(pcistat, pcicmd);
+ endian_def_b4(cc, scc, rpli, rid);
+ endian_def_b4(unused0, ht, mlt, cls);
+ volatile unsigned long ioba; /* +10 */
+ volatile unsigned long mba;
+ volatile unsigned long unused1[5];
+ endian_def_s2(svid, ssvid);
+ volatile unsigned long unused2; /* +30 */
+ endian_def_sb2(unused3, unused4, capptr);
+ volatile unsigned long unused5;
+ endian_def_b4(ml, mg, ip, il);
+ volatile unsigned long unused6; /* +40 */
+ volatile unsigned long istat;
+ volatile unsigned long iim;
+ volatile unsigned long rrt;
+ volatile unsigned long unused7[3]; /* +50 */
+ volatile unsigned long ipbmma;
+ volatile unsigned long ipbioma; /* +60 */
+ volatile unsigned long ilbmma;
+ volatile unsigned long ilbioma;
+ volatile unsigned long unused8[9];
+ volatile unsigned long tc; /* +90 */
+ volatile unsigned long tstat;
+ volatile unsigned long tim;
+ volatile unsigned long tccmd;
+ volatile unsigned long pcirrt; /* +a0 */
+ volatile unsigned long pcirrt_cmd;
+ volatile unsigned long pcirrdt;
+ volatile unsigned long unused9[3];
+ volatile unsigned long tlboap;
+ volatile unsigned long tlbiap;
+ volatile unsigned long tlbmma; /* +c0 */
+ volatile unsigned long tlbioma;
+ volatile unsigned long sc_msg;
+ volatile unsigned long sc_be;
+ volatile unsigned long tbl; /* +d0 */
+ volatile unsigned long unused10[3];
+ volatile unsigned long pwmng; /* +e0 */
+ volatile unsigned long pwmngs;
+ volatile unsigned long unused11[6];
+ volatile unsigned long req_trace; /* +100 */
+ volatile unsigned long pbapmc;
+ volatile unsigned long pbapms;
+ volatile unsigned long pbapmim;
+ volatile unsigned long bm; /* +110 */
+ volatile unsigned long cpcibrs;
+ volatile unsigned long cpcibgs;
+ volatile unsigned long pbacs;
+ volatile unsigned long iobas; /* +120 */
+ volatile unsigned long mbas;
+ volatile unsigned long lbc;
+ volatile unsigned long lbstat;
+ volatile unsigned long lbim; /* +130 */
+ volatile unsigned long pcistatim;
+ volatile unsigned long ica;
+ volatile unsigned long icd;
+ volatile unsigned long iiadp; /* +140 */
+ volatile unsigned long iscdp;
+ volatile unsigned long mmas;
+ volatile unsigned long iomas;
+ volatile unsigned long ipciaddr; /* +150 */
+ volatile unsigned long ipcidata;
+ volatile unsigned long ipcibe;
+};
+
+struct tx3927_ccfg_reg {
+ volatile unsigned long ccfg;
+ volatile unsigned long crir;
+ volatile unsigned long pcfg;
+ volatile unsigned long tear;
+ volatile unsigned long pdcr;
+};
+
+/*
+ * SDRAMC
+ */
+
+/*
+ * ROMC
+ */
+
+/*
+ * DMA
+ */
+/* bits for MCR */
+#define TX3927_DMA_MCR_EIS(ch) (0x10000000<<(ch))
+#define TX3927_DMA_MCR_DIS(ch) (0x01000000<<(ch))
+#define TX3927_DMA_MCR_RSFIF 0x00000080
+#define TX3927_DMA_MCR_FIFUM(ch) (0x00000008<<(ch))
+#define TX3927_DMA_MCR_LE 0x00000004
+#define TX3927_DMA_MCR_RPRT 0x00000002
+#define TX3927_DMA_MCR_MSTEN 0x00000001
+
+/* bits for CCRn */
+#define TX3927_DMA_CCR_DBINH 0x04000000
+#define TX3927_DMA_CCR_SBINH 0x02000000
+#define TX3927_DMA_CCR_CHRST 0x01000000
+#define TX3927_DMA_CCR_RVBYTE 0x00800000
+#define TX3927_DMA_CCR_ACKPOL 0x00400000
+#define TX3927_DMA_CCR_REQPL 0x00200000
+#define TX3927_DMA_CCR_EGREQ 0x00100000
+#define TX3927_DMA_CCR_CHDN 0x00080000
+#define TX3927_DMA_CCR_DNCTL 0x00060000
+#define TX3927_DMA_CCR_EXTRQ 0x00010000
+#define TX3927_DMA_CCR_INTRQD 0x0000e000
+#define TX3927_DMA_CCR_INTENE 0x00001000
+#define TX3927_DMA_CCR_INTENC 0x00000800
+#define TX3927_DMA_CCR_INTENT 0x00000400
+#define TX3927_DMA_CCR_CHNEN 0x00000200
+#define TX3927_DMA_CCR_XFACT 0x00000100
+#define TX3927_DMA_CCR_SNOP 0x00000080
+#define TX3927_DMA_CCR_DSTINC 0x00000040
+#define TX3927_DMA_CCR_SRCINC 0x00000020
+#define TX3927_DMA_CCR_XFSZ(order) (((order) << 2) & 0x0000001c)
+#define TX3927_DMA_CCR_XFSZ_1W TX3927_DMA_CCR_XFSZ(2)
+#define TX3927_DMA_CCR_XFSZ_4W TX3927_DMA_CCR_XFSZ(4)
+#define TX3927_DMA_CCR_XFSZ_8W TX3927_DMA_CCR_XFSZ(5)
+#define TX3927_DMA_CCR_XFSZ_16W TX3927_DMA_CCR_XFSZ(6)
+#define TX3927_DMA_CCR_XFSZ_32W TX3927_DMA_CCR_XFSZ(7)
+#define TX3927_DMA_CCR_MEMIO 0x00000002
+#define TX3927_DMA_CCR_ONEAD 0x00000001
+
+/* bits for CSRn */
+#define TX3927_DMA_CSR_CHNACT 0x00000100
+#define TX3927_DMA_CSR_ABCHC 0x00000080
+#define TX3927_DMA_CSR_NCHNC 0x00000040
+#define TX3927_DMA_CSR_NTRNFC 0x00000020
+#define TX3927_DMA_CSR_EXTDN 0x00000010
+#define TX3927_DMA_CSR_CFERR 0x00000008
+#define TX3927_DMA_CSR_CHERR 0x00000004
+#define TX3927_DMA_CSR_DESERR 0x00000002
+#define TX3927_DMA_CSR_SORERR 0x00000001
+
+/*
+ * IRC
+ */
+#define TX3927_IR_INT0 0
+#define TX3927_IR_INT1 1
+#define TX3927_IR_INT2 2
+#define TX3927_IR_INT3 3
+#define TX3927_IR_INT4 4
+#define TX3927_IR_INT5 5
+#define TX3927_IR_SIO0 6
+#define TX3927_IR_SIO1 7
+#define TX3927_IR_SIO(ch) (6 + (ch))
+#define TX3927_IR_DMA 8
+#define TX3927_IR_PIO 9
+#define TX3927_IR_PCI 10
+#define TX3927_IR_TMR(ch) (13 + (ch))
+#define TX3927_NUM_IR 16
+
+/*
+ * PCIC
+ */
+/* bits for PCICMD */
+/* see PCI_COMMAND_XXX in linux/pci.h */
+
+/* bits for PCISTAT */
+/* see PCI_STATUS_XXX in linux/pci.h */
+#define PCI_STATUS_NEW_CAP 0x0010
+
+/* bits for ISTAT/IIM */
+#define TX3927_PCIC_IIM_ALL 0x00001600
+
+/* bits for TC */
+#define TX3927_PCIC_TC_OF16E 0x00000020
+#define TX3927_PCIC_TC_IF8E 0x00000010
+#define TX3927_PCIC_TC_OF8E 0x00000008
+
+/* bits for TSTAT/TIM */
+#define TX3927_PCIC_TIM_ALL 0x0003ffff
+
+/* bits for IOBA/MBA */
+/* see PCI_BASE_ADDRESS_XXX in linux/pci.h */
+
+/* bits for PBAPMC */
+#define TX3927_PCIC_PBAPMC_RPBA 0x00000004
+#define TX3927_PCIC_PBAPMC_PBAEN 0x00000002
+#define TX3927_PCIC_PBAPMC_BMCEN 0x00000001
+
+/* bits for LBSTAT/LBIM */
+#define TX3927_PCIC_LBIM_ALL 0x0000003e
+
+/* bits for PCISTATIM (see also PCI_STATUS_XXX in linux/pci.h */
+#define TX3927_PCIC_PCISTATIM_ALL 0x0000f900
+
+/* bits for LBC */
+#define TX3927_PCIC_LBC_IBSE 0x00004000
+#define TX3927_PCIC_LBC_TIBSE 0x00002000
+#define TX3927_PCIC_LBC_TMFBSE 0x00001000
+#define TX3927_PCIC_LBC_HRST 0x00000800
+#define TX3927_PCIC_LBC_SRST 0x00000400
+#define TX3927_PCIC_LBC_EPCAD 0x00000200
+#define TX3927_PCIC_LBC_MSDSE 0x00000100
+#define TX3927_PCIC_LBC_CRR 0x00000080
+#define TX3927_PCIC_LBC_ILMDE 0x00000040
+#define TX3927_PCIC_LBC_ILIDE 0x00000020
+
+#define TX3927_PCIC_IDSEL_AD_TO_SLOT(ad) ((ad) - 11)
+#define TX3927_PCIC_MAX_DEVNU TX3927_PCIC_IDSEL_AD_TO_SLOT(32)
+
+/*
+ * CCFG
+ */
+/* CCFG : Chip Configuration */
+#define TX3927_CCFG_TLBOFF 0x00020000
+#define TX3927_CCFG_BEOW 0x00010000
+#define TX3927_CCFG_WR 0x00008000
+#define TX3927_CCFG_TOE 0x00004000
+#define TX3927_CCFG_PCIXARB 0x00002000
+#define TX3927_CCFG_PCI3 0x00001000
+#define TX3927_CCFG_PSNP 0x00000800
+#define TX3927_CCFG_PPRI 0x00000400
+#define TX3927_CCFG_PLLM 0x00000030
+#define TX3927_CCFG_ENDIAN 0x00000004
+#define TX3927_CCFG_HALT 0x00000002
+#define TX3927_CCFG_ACEHOLD 0x00000001
+
+/* PCFG : Pin Configuration */
+#define TX3927_PCFG_SYSCLKEN 0x08000000
+#define TX3927_PCFG_SDRCLKEN_ALL 0x07c00000
+#define TX3927_PCFG_SDRCLKEN(ch) (0x00400000<<(ch))
+#define TX3927_PCFG_PCICLKEN_ALL 0x003c0000
+#define TX3927_PCFG_PCICLKEN(ch) (0x00040000<<(ch))
+#define TX3927_PCFG_SELALL 0x0003ffff
+#define TX3927_PCFG_SELCS 0x00020000
+#define TX3927_PCFG_SELDSF 0x00010000
+#define TX3927_PCFG_SELSIOC_ALL 0x0000c000
+#define TX3927_PCFG_SELSIOC(ch) (0x00004000<<(ch))
+#define TX3927_PCFG_SELSIO_ALL 0x00003000
+#define TX3927_PCFG_SELSIO(ch) (0x00001000<<(ch))
+#define TX3927_PCFG_SELTMR_ALL 0x00000e00
+#define TX3927_PCFG_SELTMR(ch) (0x00000200<<(ch))
+#define TX3927_PCFG_SELDONE 0x00000100
+#define TX3927_PCFG_INTDMA_ALL 0x000000f0
+#define TX3927_PCFG_INTDMA(ch) (0x00000010<<(ch))
+#define TX3927_PCFG_SELDMA_ALL 0x0000000f
+#define TX3927_PCFG_SELDMA(ch) (0x00000001<<(ch))
+
+#define tx3927_sdramcptr ((struct tx3927_sdramc_reg *)TX3927_SDRAMC_REG)
+#define tx3927_romcptr ((struct tx3927_romc_reg *)TX3927_ROMC_REG)
+#define tx3927_dmaptr ((struct tx3927_dma_reg *)TX3927_DMA_REG)
+#define tx3927_pcicptr ((struct tx3927_pcic_reg *)TX3927_PCIC_REG)
+#define tx3927_ccfgptr ((struct tx3927_ccfg_reg *)TX3927_CCFG_REG)
+#define tx3927_sioptr(ch) ((struct txx927_sio_reg *)TX3927_SIO_REG(ch))
+#define tx3927_pioptr ((struct txx9_pio_reg __iomem *)TX3927_PIO_REG)
+
+#define TX3927_REV_PCODE() (tx3927_ccfgptr->crir >> 16)
+#define TX3927_ROMC_BA(ch) (tx3927_romcptr->cr[(ch)] & 0xfff00000)
+#define TX3927_ROMC_SIZE(ch) \
+ (0x00100000 << ((tx3927_romcptr->cr[(ch)] >> 8) & 0xf))
+#define TX3927_ROMC_WIDTH(ch) (32 >> ((tx3927_romcptr->cr[(ch)] >> 7) & 0x1))
+
+void tx3927_wdt_init(void);
+void tx3927_setup(void);
+void tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr);
+void tx3927_sio_init(unsigned int sclk, unsigned int cts_mask);
+struct pci_controller;
+void tx3927_pcic_setup(struct pci_controller *channel,
+ unsigned long sdram_size, int extarb);
+void tx3927_setup_pcierr_irq(void);
+void tx3927_irq_init(void);
+void tx3927_mtd_init(int ch);
+
+#endif /* __ASM_TXX9_TX3927_H */
diff --git a/arch/mips/include/asm/txx9/tx4927.h b/arch/mips/include/asm/txx9/tx4927.h
new file mode 100644
index 00000000000..7d813f1cb98
--- /dev/null
+++ b/arch/mips/include/asm/txx9/tx4927.h
@@ -0,0 +1,269 @@
+/*
+ * Author: MontaVista Software, Inc.
+ * source@mvista.com
+ *
+ * Copyright 2001-2006 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_TXX9_TX4927_H
+#define __ASM_TXX9_TX4927_H
+
+#include <linux/types.h>
+#include <linux/io.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9/tx4927pcic.h>
+
+#ifdef CONFIG_64BIT
+#define TX4927_REG_BASE 0xffffffffff1f0000UL
+#else
+#define TX4927_REG_BASE 0xff1f0000UL
+#endif
+#define TX4927_REG_SIZE 0x00010000
+
+#define TX4927_SDRAMC_REG (TX4927_REG_BASE + 0x8000)
+#define TX4927_EBUSC_REG (TX4927_REG_BASE + 0x9000)
+#define TX4927_PCIC_REG (TX4927_REG_BASE + 0xd000)
+#define TX4927_CCFG_REG (TX4927_REG_BASE + 0xe000)
+#define TX4927_IRC_REG (TX4927_REG_BASE + 0xf600)
+#define TX4927_NR_TMR 3
+#define TX4927_TMR_REG(ch) (TX4927_REG_BASE + 0xf000 + (ch) * 0x100)
+#define TX4927_NR_SIO 2
+#define TX4927_SIO_REG(ch) (TX4927_REG_BASE + 0xf300 + (ch) * 0x100)
+#define TX4927_PIO_REG (TX4927_REG_BASE + 0xf500)
+
+#define TX4927_IR_ECCERR 0
+#define TX4927_IR_WTOERR 1
+#define TX4927_NUM_IR_INT 6
+#define TX4927_IR_INT(n) (2 + (n))
+#define TX4927_NUM_IR_SIO 2
+#define TX4927_IR_SIO(n) (8 + (n))
+#define TX4927_NUM_IR_DMA 4
+#define TX4927_IR_DMA(n) (10 + (n))
+#define TX4927_IR_PIO 14
+#define TX4927_IR_PDMAC 15
+#define TX4927_IR_PCIC 16
+#define TX4927_NUM_IR_TMR 3
+#define TX4927_IR_TMR(n) (17 + (n))
+#define TX4927_IR_PCIERR 22
+#define TX4927_IR_PCIPME 23
+#define TX4927_IR_ACLC 24
+#define TX4927_IR_ACLCPME 25
+#define TX4927_NUM_IR 32
+
+#define TX4927_IRC_INT 2 /* IP[2] in Status register */
+
+#define TX4927_NUM_PIO 16
+
+struct tx4927_sdramc_reg {
+ u64 cr[4];
+ u64 unused0[4];
+ u64 tr;
+ u64 unused1[2];
+ u64 cmd;
+};
+
+struct tx4927_ebusc_reg {
+ u64 cr[8];
+};
+
+struct tx4927_ccfg_reg {
+ u64 ccfg;
+ u64 crir;
+ u64 pcfg;
+ u64 toea;
+ u64 clkctr;
+ u64 unused0;
+ u64 garbc;
+ u64 unused1;
+ u64 unused2;
+ u64 ramp;
+};
+
+/*
+ * CCFG
+ */
+/* CCFG : Chip Configuration */
+#define TX4927_CCFG_WDRST 0x0000020000000000ULL
+#define TX4927_CCFG_WDREXEN 0x0000010000000000ULL
+#define TX4927_CCFG_BCFG_MASK 0x000000ff00000000ULL
+#define TX4927_CCFG_TINTDIS 0x01000000
+#define TX4927_CCFG_PCI66 0x00800000
+#define TX4927_CCFG_PCIMODE 0x00400000
+#define TX4927_CCFG_DIVMODE_MASK 0x000e0000
+#define TX4927_CCFG_DIVMODE_8 (0x0 << 17)
+#define TX4927_CCFG_DIVMODE_12 (0x1 << 17)
+#define TX4927_CCFG_DIVMODE_16 (0x2 << 17)
+#define TX4927_CCFG_DIVMODE_10 (0x3 << 17)
+#define TX4927_CCFG_DIVMODE_2 (0x4 << 17)
+#define TX4927_CCFG_DIVMODE_3 (0x5 << 17)
+#define TX4927_CCFG_DIVMODE_4 (0x6 << 17)
+#define TX4927_CCFG_DIVMODE_2_5 (0x7 << 17)
+#define TX4927_CCFG_BEOW 0x00010000
+#define TX4927_CCFG_WR 0x00008000
+#define TX4927_CCFG_TOE 0x00004000
+#define TX4927_CCFG_PCIARB 0x00002000
+#define TX4927_CCFG_PCIDIVMODE_MASK 0x00001800
+#define TX4927_CCFG_PCIDIVMODE_2_5 0x00000000
+#define TX4927_CCFG_PCIDIVMODE_3 0x00000800
+#define TX4927_CCFG_PCIDIVMODE_5 0x00001000
+#define TX4927_CCFG_PCIDIVMODE_6 0x00001800
+#define TX4927_CCFG_SYSSP_MASK 0x000000c0
+#define TX4927_CCFG_ENDIAN 0x00000004
+#define TX4927_CCFG_HALT 0x00000002
+#define TX4927_CCFG_ACEHOLD 0x00000001
+#define TX4927_CCFG_W1CBITS (TX4927_CCFG_WDRST | TX4927_CCFG_BEOW)
+
+/* PCFG : Pin Configuration */
+#define TX4927_PCFG_SDCLKDLY_MASK 0x30000000
+#define TX4927_PCFG_SDCLKDLY(d) ((d)<<28)
+#define TX4927_PCFG_SYSCLKEN 0x08000000
+#define TX4927_PCFG_SDCLKEN_ALL 0x07800000
+#define TX4927_PCFG_SDCLKEN(ch) (0x00800000<<(ch))
+#define TX4927_PCFG_PCICLKEN_ALL 0x003f0000
+#define TX4927_PCFG_PCICLKEN(ch) (0x00010000<<(ch))
+#define TX4927_PCFG_SEL2 0x00000200
+#define TX4927_PCFG_SEL1 0x00000100
+#define TX4927_PCFG_DMASEL_ALL 0x000000ff
+#define TX4927_PCFG_DMASEL0_MASK 0x00000003
+#define TX4927_PCFG_DMASEL1_MASK 0x0000000c
+#define TX4927_PCFG_DMASEL2_MASK 0x00000030
+#define TX4927_PCFG_DMASEL3_MASK 0x000000c0
+#define TX4927_PCFG_DMASEL0_DRQ0 0x00000000
+#define TX4927_PCFG_DMASEL0_SIO1 0x00000001
+#define TX4927_PCFG_DMASEL0_ACL0 0x00000002
+#define TX4927_PCFG_DMASEL0_ACL2 0x00000003
+#define TX4927_PCFG_DMASEL1_DRQ1 0x00000000
+#define TX4927_PCFG_DMASEL1_SIO1 0x00000004
+#define TX4927_PCFG_DMASEL1_ACL1 0x00000008
+#define TX4927_PCFG_DMASEL1_ACL3 0x0000000c
+#define TX4927_PCFG_DMASEL2_DRQ2 0x00000000 /* SEL2=0 */
+#define TX4927_PCFG_DMASEL2_SIO0 0x00000010 /* SEL2=0 */
+#define TX4927_PCFG_DMASEL2_ACL1 0x00000000 /* SEL2=1 */
+#define TX4927_PCFG_DMASEL2_ACL2 0x00000020 /* SEL2=1 */
+#define TX4927_PCFG_DMASEL2_ACL0 0x00000030 /* SEL2=1 */
+#define TX4927_PCFG_DMASEL3_DRQ3 0x00000000
+#define TX4927_PCFG_DMASEL3_SIO0 0x00000040
+#define TX4927_PCFG_DMASEL3_ACL3 0x00000080
+#define TX4927_PCFG_DMASEL3_ACL1 0x000000c0
+
+/* CLKCTR : Clock Control */
+#define TX4927_CLKCTR_ACLCKD 0x02000000
+#define TX4927_CLKCTR_PIOCKD 0x01000000
+#define TX4927_CLKCTR_DMACKD 0x00800000
+#define TX4927_CLKCTR_PCICKD 0x00400000
+#define TX4927_CLKCTR_TM0CKD 0x00100000
+#define TX4927_CLKCTR_TM1CKD 0x00080000
+#define TX4927_CLKCTR_TM2CKD 0x00040000
+#define TX4927_CLKCTR_SIO0CKD 0x00020000
+#define TX4927_CLKCTR_SIO1CKD 0x00010000
+#define TX4927_CLKCTR_ACLRST 0x00000200
+#define TX4927_CLKCTR_PIORST 0x00000100
+#define TX4927_CLKCTR_DMARST 0x00000080
+#define TX4927_CLKCTR_PCIRST 0x00000040
+#define TX4927_CLKCTR_TM0RST 0x00000010
+#define TX4927_CLKCTR_TM1RST 0x00000008
+#define TX4927_CLKCTR_TM2RST 0x00000004
+#define TX4927_CLKCTR_SIO0RST 0x00000002
+#define TX4927_CLKCTR_SIO1RST 0x00000001
+
+#define tx4927_sdramcptr \
+ ((struct tx4927_sdramc_reg __iomem *)TX4927_SDRAMC_REG)
+#define tx4927_pcicptr \
+ ((struct tx4927_pcic_reg __iomem *)TX4927_PCIC_REG)
+#define tx4927_ccfgptr \
+ ((struct tx4927_ccfg_reg __iomem *)TX4927_CCFG_REG)
+#define tx4927_ebuscptr \
+ ((struct tx4927_ebusc_reg __iomem *)TX4927_EBUSC_REG)
+#define tx4927_pioptr ((struct txx9_pio_reg __iomem *)TX4927_PIO_REG)
+
+#define TX4927_REV_PCODE() \
+ ((__u32)__raw_readq(&tx4927_ccfgptr->crir) >> 16)
+
+#define TX4927_SDRAMC_CR(ch) __raw_readq(&tx4927_sdramcptr->cr[(ch)])
+#define TX4927_SDRAMC_BA(ch) ((TX4927_SDRAMC_CR(ch) >> 49) << 21)
+#define TX4927_SDRAMC_SIZE(ch) \
+ ((((TX4927_SDRAMC_CR(ch) >> 33) & 0x7fff) + 1) << 21)
+
+#define TX4927_EBUSC_CR(ch) __raw_readq(&tx4927_ebuscptr->cr[(ch)])
+#define TX4927_EBUSC_BA(ch) ((TX4927_EBUSC_CR(ch) >> 48) << 20)
+#define TX4927_EBUSC_SIZE(ch) \
+ (0x00100000 << ((unsigned long)(TX4927_EBUSC_CR(ch) >> 8) & 0xf))
+#define TX4927_EBUSC_WIDTH(ch) \
+ (64 >> ((__u32)(TX4927_EBUSC_CR(ch) >> 20) & 0x3))
+
+/* utilities */
+static inline void txx9_clear64(__u64 __iomem *adr, __u64 bits)
+{
+#ifdef CONFIG_32BIT
+ unsigned long flags;
+ local_irq_save(flags);
+#endif
+ ____raw_writeq(____raw_readq(adr) & ~bits, adr);
+#ifdef CONFIG_32BIT
+ local_irq_restore(flags);
+#endif
+}
+static inline void txx9_set64(__u64 __iomem *adr, __u64 bits)
+{
+#ifdef CONFIG_32BIT
+ unsigned long flags;
+ local_irq_save(flags);
+#endif
+ ____raw_writeq(____raw_readq(adr) | bits, adr);
+#ifdef CONFIG_32BIT
+ local_irq_restore(flags);
+#endif
+}
+
+/* These functions are not interrupt safe. */
+static inline void tx4927_ccfg_clear(__u64 bits)
+{
+ ____raw_writeq(____raw_readq(&tx4927_ccfgptr->ccfg)
+ & ~(TX4927_CCFG_W1CBITS | bits),
+ &tx4927_ccfgptr->ccfg);
+}
+static inline void tx4927_ccfg_set(__u64 bits)
+{
+ ____raw_writeq((____raw_readq(&tx4927_ccfgptr->ccfg)
+ & ~TX4927_CCFG_W1CBITS) | bits,
+ &tx4927_ccfgptr->ccfg);
+}
+static inline void tx4927_ccfg_change(__u64 change, __u64 new)
+{
+ ____raw_writeq((____raw_readq(&tx4927_ccfgptr->ccfg)
+ & ~(TX4927_CCFG_W1CBITS | change)) |
+ new,
+ &tx4927_ccfgptr->ccfg);
+}
+
+unsigned int tx4927_get_mem_size(void);
+void tx4927_wdt_init(void);
+void tx4927_setup(void);
+void tx4927_time_init(unsigned int tmrnr);
+void tx4927_sio_init(unsigned int sclk, unsigned int cts_mask);
+int tx4927_report_pciclk(void);
+int tx4927_pciclk66_setup(void);
+void tx4927_setup_pcierr_irq(void);
+void tx4927_irq_init(void);
+void tx4927_mtd_init(int ch);
+
+#endif /* __ASM_TXX9_TX4927_H */
diff --git a/arch/mips/include/asm/txx9/tx4927pcic.h b/arch/mips/include/asm/txx9/tx4927pcic.h
new file mode 100644
index 00000000000..c470b8a5fe5
--- /dev/null
+++ b/arch/mips/include/asm/txx9/tx4927pcic.h
@@ -0,0 +1,203 @@
+/*
+ * include/asm-mips/txx9/tx4927pcic.h
+ * TX4927 PCI controller definitions.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_TXX9_TX4927PCIC_H
+#define __ASM_TXX9_TX4927PCIC_H
+
+#include <linux/pci.h>
+#include <linux/irqreturn.h>
+
+struct tx4927_pcic_reg {
+ u32 pciid;
+ u32 pcistatus;
+ u32 pciccrev;
+ u32 pcicfg1;
+ u32 p2gm0plbase; /* +10 */
+ u32 p2gm0pubase;
+ u32 p2gm1plbase;
+ u32 p2gm1pubase;
+ u32 p2gm2pbase; /* +20 */
+ u32 p2giopbase;
+ u32 unused0;
+ u32 pcisid;
+ u32 unused1; /* +30 */
+ u32 pcicapptr;
+ u32 unused2;
+ u32 pcicfg2;
+ u32 g2ptocnt; /* +40 */
+ u32 unused3[15];
+ u32 g2pstatus; /* +80 */
+ u32 g2pmask;
+ u32 pcisstatus;
+ u32 pcimask;
+ u32 p2gcfg; /* +90 */
+ u32 p2gstatus;
+ u32 p2gmask;
+ u32 p2gccmd;
+ u32 unused4[24]; /* +a0 */
+ u32 pbareqport; /* +100 */
+ u32 pbacfg;
+ u32 pbastatus;
+ u32 pbamask;
+ u32 pbabm; /* +110 */
+ u32 pbacreq;
+ u32 pbacgnt;
+ u32 pbacstate;
+ u64 g2pmgbase[3]; /* +120 */
+ u64 g2piogbase;
+ u32 g2pmmask[3]; /* +140 */
+ u32 g2piomask;
+ u64 g2pmpbase[3]; /* +150 */
+ u64 g2piopbase;
+ u32 pciccfg; /* +170 */
+ u32 pcicstatus;
+ u32 pcicmask;
+ u32 unused5;
+ u64 p2gmgbase[3]; /* +180 */
+ u64 p2giogbase;
+ u32 g2pcfgadrs; /* +1a0 */
+ u32 g2pcfgdata;
+ u32 unused6[8];
+ u32 g2pintack;
+ u32 g2pspc;
+ u32 unused7[12]; /* +1d0 */
+ u64 pdmca; /* +200 */
+ u64 pdmga;
+ u64 pdmpa;
+ u64 pdmctr;
+ u64 pdmcfg; /* +220 */
+ u64 pdmsts;
+};
+
+/* bits for PCICMD */
+/* see PCI_COMMAND_XXX in linux/pci_regs.h */
+
+/* bits for PCISTAT */
+/* see PCI_STATUS_XXX in linux/pci_regs.h */
+
+/* bits for IOBA/MBA */
+/* see PCI_BASE_ADDRESS_XXX in linux/pci_regs.h */
+
+/* bits for G2PSTATUS/G2PMASK */
+#define TX4927_PCIC_G2PSTATUS_ALL 0x00000003
+#define TX4927_PCIC_G2PSTATUS_TTOE 0x00000002
+#define TX4927_PCIC_G2PSTATUS_RTOE 0x00000001
+
+/* bits for PCIMASK (see also PCI_STATUS_XXX in linux/pci_regs.h */
+#define TX4927_PCIC_PCISTATUS_ALL 0x0000f900
+
+/* bits for PBACFG */
+#define TX4927_PCIC_PBACFG_FIXPA 0x00000008
+#define TX4927_PCIC_PBACFG_RPBA 0x00000004
+#define TX4927_PCIC_PBACFG_PBAEN 0x00000002
+#define TX4927_PCIC_PBACFG_BMCEN 0x00000001
+
+/* bits for PBASTATUS/PBAMASK */
+#define TX4927_PCIC_PBASTATUS_ALL 0x00000001
+#define TX4927_PCIC_PBASTATUS_BM 0x00000001
+
+/* bits for G2PMnGBASE */
+#define TX4927_PCIC_G2PMnGBASE_BSDIS 0x0000002000000000ULL
+#define TX4927_PCIC_G2PMnGBASE_ECHG 0x0000001000000000ULL
+
+/* bits for G2PIOGBASE */
+#define TX4927_PCIC_G2PIOGBASE_BSDIS 0x0000002000000000ULL
+#define TX4927_PCIC_G2PIOGBASE_ECHG 0x0000001000000000ULL
+
+/* bits for PCICSTATUS/PCICMASK */
+#define TX4927_PCIC_PCICSTATUS_ALL 0x000007b8
+#define TX4927_PCIC_PCICSTATUS_PME 0x00000400
+#define TX4927_PCIC_PCICSTATUS_TLB 0x00000200
+#define TX4927_PCIC_PCICSTATUS_NIB 0x00000100
+#define TX4927_PCIC_PCICSTATUS_ZIB 0x00000080
+#define TX4927_PCIC_PCICSTATUS_PERR 0x00000020
+#define TX4927_PCIC_PCICSTATUS_SERR 0x00000010
+#define TX4927_PCIC_PCICSTATUS_GBE 0x00000008
+#define TX4927_PCIC_PCICSTATUS_IWB 0x00000002
+#define TX4927_PCIC_PCICSTATUS_E2PDONE 0x00000001
+
+/* bits for PCICCFG */
+#define TX4927_PCIC_PCICCFG_GBWC_MASK 0x0fff0000
+#define TX4927_PCIC_PCICCFG_HRST 0x00000800
+#define TX4927_PCIC_PCICCFG_SRST 0x00000400
+#define TX4927_PCIC_PCICCFG_IRBER 0x00000200
+#define TX4927_PCIC_PCICCFG_G2PMEN(ch) (0x00000100>>(ch))
+#define TX4927_PCIC_PCICCFG_G2PM0EN 0x00000100
+#define TX4927_PCIC_PCICCFG_G2PM1EN 0x00000080
+#define TX4927_PCIC_PCICCFG_G2PM2EN 0x00000040
+#define TX4927_PCIC_PCICCFG_G2PIOEN 0x00000020
+#define TX4927_PCIC_PCICCFG_TCAR 0x00000010
+#define TX4927_PCIC_PCICCFG_ICAEN 0x00000008
+
+/* bits for P2GMnGBASE */
+#define TX4927_PCIC_P2GMnGBASE_TMEMEN 0x0000004000000000ULL
+#define TX4927_PCIC_P2GMnGBASE_TBSDIS 0x0000002000000000ULL
+#define TX4927_PCIC_P2GMnGBASE_TECHG 0x0000001000000000ULL
+
+/* bits for P2GIOGBASE */
+#define TX4927_PCIC_P2GIOGBASE_TIOEN 0x0000004000000000ULL
+#define TX4927_PCIC_P2GIOGBASE_TBSDIS 0x0000002000000000ULL
+#define TX4927_PCIC_P2GIOGBASE_TECHG 0x0000001000000000ULL
+
+#define TX4927_PCIC_IDSEL_AD_TO_SLOT(ad) ((ad) - 11)
+#define TX4927_PCIC_MAX_DEVNU TX4927_PCIC_IDSEL_AD_TO_SLOT(32)
+
+/* bits for PDMCFG */
+#define TX4927_PCIC_PDMCFG_RSTFIFO 0x00200000
+#define TX4927_PCIC_PDMCFG_EXFER 0x00100000
+#define TX4927_PCIC_PDMCFG_REQDLY_MASK 0x00003800
+#define TX4927_PCIC_PDMCFG_REQDLY_NONE (0 << 11)
+#define TX4927_PCIC_PDMCFG_REQDLY_16 (1 << 11)
+#define TX4927_PCIC_PDMCFG_REQDLY_32 (2 << 11)
+#define TX4927_PCIC_PDMCFG_REQDLY_64 (3 << 11)
+#define TX4927_PCIC_PDMCFG_REQDLY_128 (4 << 11)
+#define TX4927_PCIC_PDMCFG_REQDLY_256 (5 << 11)
+#define TX4927_PCIC_PDMCFG_REQDLY_512 (6 << 11)
+#define TX4927_PCIC_PDMCFG_REQDLY_1024 (7 << 11)
+#define TX4927_PCIC_PDMCFG_ERRIE 0x00000400
+#define TX4927_PCIC_PDMCFG_NCCMPIE 0x00000200
+#define TX4927_PCIC_PDMCFG_NTCMPIE 0x00000100
+#define TX4927_PCIC_PDMCFG_CHNEN 0x00000080
+#define TX4927_PCIC_PDMCFG_XFRACT 0x00000040
+#define TX4927_PCIC_PDMCFG_BSWAP 0x00000020
+#define TX4927_PCIC_PDMCFG_XFRSIZE_MASK 0x0000000c
+#define TX4927_PCIC_PDMCFG_XFRSIZE_1DW 0x00000000
+#define TX4927_PCIC_PDMCFG_XFRSIZE_1QW 0x00000004
+#define TX4927_PCIC_PDMCFG_XFRSIZE_4QW 0x00000008
+#define TX4927_PCIC_PDMCFG_XFRDIRC 0x00000002
+#define TX4927_PCIC_PDMCFG_CHRST 0x00000001
+
+/* bits for PDMSTS */
+#define TX4927_PCIC_PDMSTS_REQCNT_MASK 0x3f000000
+#define TX4927_PCIC_PDMSTS_FIFOCNT_MASK 0x00f00000
+#define TX4927_PCIC_PDMSTS_FIFOWP_MASK 0x000c0000
+#define TX4927_PCIC_PDMSTS_FIFORP_MASK 0x00030000
+#define TX4927_PCIC_PDMSTS_ERRINT 0x00000800
+#define TX4927_PCIC_PDMSTS_DONEINT 0x00000400
+#define TX4927_PCIC_PDMSTS_CHNEN 0x00000200
+#define TX4927_PCIC_PDMSTS_XFRACT 0x00000100
+#define TX4927_PCIC_PDMSTS_ACCMP 0x00000080
+#define TX4927_PCIC_PDMSTS_NCCMP 0x00000040
+#define TX4927_PCIC_PDMSTS_NTCMP 0x00000020
+#define TX4927_PCIC_PDMSTS_CFGERR 0x00000008
+#define TX4927_PCIC_PDMSTS_PCIERR 0x00000004
+#define TX4927_PCIC_PDMSTS_CHNERR 0x00000002
+#define TX4927_PCIC_PDMSTS_DATAERR 0x00000001
+#define TX4927_PCIC_PDMSTS_ALL_CMP 0x000000e0
+#define TX4927_PCIC_PDMSTS_ALL_ERR 0x0000000f
+
+struct tx4927_pcic_reg __iomem *get_tx4927_pcicptr(
+ struct pci_controller *channel);
+void tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
+ struct pci_controller *channel, int extarb);
+void tx4927_report_pcic_status(void);
+char *tx4927_pcibios_setup(char *str);
+void tx4927_dump_pcic_settings(void);
+irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id);
+
+#endif /* __ASM_TXX9_TX4927PCIC_H */
diff --git a/arch/mips/include/asm/txx9/tx4938.h b/arch/mips/include/asm/txx9/tx4938.h
new file mode 100644
index 00000000000..0b068154054
--- /dev/null
+++ b/arch/mips/include/asm/txx9/tx4938.h
@@ -0,0 +1,308 @@
+/*
+ * Definitions for TX4937/TX4938
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#ifndef __ASM_TXX9_TX4938_H
+#define __ASM_TXX9_TX4938_H
+
+/* some controllers are compatible with 4927 */
+#include <asm/txx9/tx4927.h>
+
+#ifdef CONFIG_64BIT
+#define TX4938_REG_BASE 0xffffffffff1f0000UL /* == TX4937_REG_BASE */
+#else
+#define TX4938_REG_BASE 0xff1f0000UL /* == TX4937_REG_BASE */
+#endif
+#define TX4938_REG_SIZE 0x00010000 /* == TX4937_REG_SIZE */
+
+/* NDFMC, SRAMC, PCIC1, SPIC: TX4938 only */
+#define TX4938_NDFMC_REG (TX4938_REG_BASE + 0x5000)
+#define TX4938_SRAMC_REG (TX4938_REG_BASE + 0x6000)
+#define TX4938_PCIC1_REG (TX4938_REG_BASE + 0x7000)
+#define TX4938_SDRAMC_REG (TX4938_REG_BASE + 0x8000)
+#define TX4938_EBUSC_REG (TX4938_REG_BASE + 0x9000)
+#define TX4938_DMA_REG(ch) (TX4938_REG_BASE + 0xb000 + (ch) * 0x800)
+#define TX4938_PCIC_REG (TX4938_REG_BASE + 0xd000)
+#define TX4938_CCFG_REG (TX4938_REG_BASE + 0xe000)
+#define TX4938_NR_TMR 3
+#define TX4938_TMR_REG(ch) ((TX4938_REG_BASE + 0xf000) + (ch) * 0x100)
+#define TX4938_NR_SIO 2
+#define TX4938_SIO_REG(ch) ((TX4938_REG_BASE + 0xf300) + (ch) * 0x100)
+#define TX4938_PIO_REG (TX4938_REG_BASE + 0xf500)
+#define TX4938_IRC_REG (TX4938_REG_BASE + 0xf600)
+#define TX4938_ACLC_REG (TX4938_REG_BASE + 0xf700)
+#define TX4938_SPI_REG (TX4938_REG_BASE + 0xf800)
+
+struct tx4938_sramc_reg {
+ u64 cr;
+};
+
+struct tx4938_ccfg_reg {
+ u64 ccfg;
+ u64 crir;
+ u64 pcfg;
+ u64 toea;
+ u64 clkctr;
+ u64 unused0;
+ u64 garbc;
+ u64 unused1;
+ u64 unused2;
+ u64 ramp;
+ u64 unused3;
+ u64 jmpadr;
+};
+
+/*
+ * IRC
+ */
+
+#define TX4938_IR_ECCERR 0
+#define TX4938_IR_WTOERR 1
+#define TX4938_NUM_IR_INT 6
+#define TX4938_IR_INT(n) (2 + (n))
+#define TX4938_NUM_IR_SIO 2
+#define TX4938_IR_SIO(n) (8 + (n))
+#define TX4938_NUM_IR_DMA 4
+#define TX4938_IR_DMA(ch, n) ((ch ? 27 : 10) + (n)) /* 10-13, 27-30 */
+#define TX4938_IR_PIO 14
+#define TX4938_IR_PDMAC 15
+#define TX4938_IR_PCIC 16
+#define TX4938_NUM_IR_TMR 3
+#define TX4938_IR_TMR(n) (17 + (n))
+#define TX4938_IR_NDFMC 21
+#define TX4938_IR_PCIERR 22
+#define TX4938_IR_PCIPME 23
+#define TX4938_IR_ACLC 24
+#define TX4938_IR_ACLCPME 25
+#define TX4938_IR_PCIC1 26
+#define TX4938_IR_SPI 31
+#define TX4938_NUM_IR 32
+/* multiplex */
+#define TX4938_IR_ETH0 TX4938_IR_INT(4)
+#define TX4938_IR_ETH1 TX4938_IR_INT(3)
+
+#define TX4938_IRC_INT 2 /* IP[2] in Status register */
+
+#define TX4938_NUM_PIO 16
+
+/*
+ * CCFG
+ */
+/* CCFG : Chip Configuration */
+#define TX4938_CCFG_WDRST 0x0000020000000000ULL
+#define TX4938_CCFG_WDREXEN 0x0000010000000000ULL
+#define TX4938_CCFG_BCFG_MASK 0x000000ff00000000ULL
+#define TX4938_CCFG_TINTDIS 0x01000000
+#define TX4938_CCFG_PCI66 0x00800000
+#define TX4938_CCFG_PCIMODE 0x00400000
+#define TX4938_CCFG_PCI1_66 0x00200000
+#define TX4938_CCFG_DIVMODE_MASK 0x001e0000
+#define TX4938_CCFG_DIVMODE_2 (0x4 << 17)
+#define TX4938_CCFG_DIVMODE_2_5 (0xf << 17)
+#define TX4938_CCFG_DIVMODE_3 (0x5 << 17)
+#define TX4938_CCFG_DIVMODE_4 (0x6 << 17)
+#define TX4938_CCFG_DIVMODE_4_5 (0xd << 17)
+#define TX4938_CCFG_DIVMODE_8 (0x0 << 17)
+#define TX4938_CCFG_DIVMODE_10 (0xb << 17)
+#define TX4938_CCFG_DIVMODE_12 (0x1 << 17)
+#define TX4938_CCFG_DIVMODE_16 (0x2 << 17)
+#define TX4938_CCFG_DIVMODE_18 (0x9 << 17)
+#define TX4938_CCFG_BEOW 0x00010000
+#define TX4938_CCFG_WR 0x00008000
+#define TX4938_CCFG_TOE 0x00004000
+#define TX4938_CCFG_PCIARB 0x00002000
+#define TX4938_CCFG_PCIDIVMODE_MASK 0x00001c00
+#define TX4938_CCFG_PCIDIVMODE_4 (0x1 << 10)
+#define TX4938_CCFG_PCIDIVMODE_4_5 (0x3 << 10)
+#define TX4938_CCFG_PCIDIVMODE_5 (0x5 << 10)
+#define TX4938_CCFG_PCIDIVMODE_5_5 (0x7 << 10)
+#define TX4938_CCFG_PCIDIVMODE_8 (0x0 << 10)
+#define TX4938_CCFG_PCIDIVMODE_9 (0x2 << 10)
+#define TX4938_CCFG_PCIDIVMODE_10 (0x4 << 10)
+#define TX4938_CCFG_PCIDIVMODE_11 (0x6 << 10)
+#define TX4938_CCFG_PCI1DMD 0x00000100
+#define TX4938_CCFG_SYSSP_MASK 0x000000c0
+#define TX4938_CCFG_ENDIAN 0x00000004
+#define TX4938_CCFG_HALT 0x00000002
+#define TX4938_CCFG_ACEHOLD 0x00000001
+
+/* PCFG : Pin Configuration */
+#define TX4938_PCFG_ETH0_SEL 0x8000000000000000ULL
+#define TX4938_PCFG_ETH1_SEL 0x4000000000000000ULL
+#define TX4938_PCFG_ATA_SEL 0x2000000000000000ULL
+#define TX4938_PCFG_ISA_SEL 0x1000000000000000ULL
+#define TX4938_PCFG_SPI_SEL 0x0800000000000000ULL
+#define TX4938_PCFG_NDF_SEL 0x0400000000000000ULL
+#define TX4938_PCFG_SDCLKDLY_MASK 0x30000000
+#define TX4938_PCFG_SDCLKDLY(d) ((d)<<28)
+#define TX4938_PCFG_SYSCLKEN 0x08000000
+#define TX4938_PCFG_SDCLKEN_ALL 0x07800000
+#define TX4938_PCFG_SDCLKEN(ch) (0x00800000<<(ch))
+#define TX4938_PCFG_PCICLKEN_ALL 0x003f0000
+#define TX4938_PCFG_PCICLKEN(ch) (0x00010000<<(ch))
+#define TX4938_PCFG_SEL2 0x00000200
+#define TX4938_PCFG_SEL1 0x00000100
+#define TX4938_PCFG_DMASEL_ALL 0x0000000f
+#define TX4938_PCFG_DMASEL0_DRQ0 0x00000000
+#define TX4938_PCFG_DMASEL0_SIO1 0x00000001
+#define TX4938_PCFG_DMASEL1_DRQ1 0x00000000
+#define TX4938_PCFG_DMASEL1_SIO1 0x00000002
+#define TX4938_PCFG_DMASEL2_DRQ2 0x00000000
+#define TX4938_PCFG_DMASEL2_SIO0 0x00000004
+#define TX4938_PCFG_DMASEL3_DRQ3 0x00000000
+#define TX4938_PCFG_DMASEL3_SIO0 0x00000008
+
+/* CLKCTR : Clock Control */
+#define TX4938_CLKCTR_NDFCKD 0x0001000000000000ULL
+#define TX4938_CLKCTR_NDFRST 0x0000000100000000ULL
+#define TX4938_CLKCTR_ETH1CKD 0x80000000
+#define TX4938_CLKCTR_ETH0CKD 0x40000000
+#define TX4938_CLKCTR_SPICKD 0x20000000
+#define TX4938_CLKCTR_SRAMCKD 0x10000000
+#define TX4938_CLKCTR_PCIC1CKD 0x08000000
+#define TX4938_CLKCTR_DMA1CKD 0x04000000
+#define TX4938_CLKCTR_ACLCKD 0x02000000
+#define TX4938_CLKCTR_PIOCKD 0x01000000
+#define TX4938_CLKCTR_DMACKD 0x00800000
+#define TX4938_CLKCTR_PCICKD 0x00400000
+#define TX4938_CLKCTR_TM0CKD 0x00100000
+#define TX4938_CLKCTR_TM1CKD 0x00080000
+#define TX4938_CLKCTR_TM2CKD 0x00040000
+#define TX4938_CLKCTR_SIO0CKD 0x00020000
+#define TX4938_CLKCTR_SIO1CKD 0x00010000
+#define TX4938_CLKCTR_ETH1RST 0x00008000
+#define TX4938_CLKCTR_ETH0RST 0x00004000
+#define TX4938_CLKCTR_SPIRST 0x00002000
+#define TX4938_CLKCTR_SRAMRST 0x00001000
+#define TX4938_CLKCTR_PCIC1RST 0x00000800
+#define TX4938_CLKCTR_DMA1RST 0x00000400
+#define TX4938_CLKCTR_ACLRST 0x00000200
+#define TX4938_CLKCTR_PIORST 0x00000100
+#define TX4938_CLKCTR_DMARST 0x00000080
+#define TX4938_CLKCTR_PCIRST 0x00000040
+#define TX4938_CLKCTR_TM0RST 0x00000010
+#define TX4938_CLKCTR_TM1RST 0x00000008
+#define TX4938_CLKCTR_TM2RST 0x00000004
+#define TX4938_CLKCTR_SIO0RST 0x00000002
+#define TX4938_CLKCTR_SIO1RST 0x00000001
+
+/*
+ * DMA
+ */
+/* bits for MCR */
+#define TX4938_DMA_MCR_EIS(ch) (0x10000000<<(ch))
+#define TX4938_DMA_MCR_DIS(ch) (0x01000000<<(ch))
+#define TX4938_DMA_MCR_RSFIF 0x00000080
+#define TX4938_DMA_MCR_FIFUM(ch) (0x00000008<<(ch))
+#define TX4938_DMA_MCR_RPRT 0x00000002
+#define TX4938_DMA_MCR_MSTEN 0x00000001
+
+/* bits for CCRn */
+#define TX4938_DMA_CCR_IMMCHN 0x20000000
+#define TX4938_DMA_CCR_USEXFSZ 0x10000000
+#define TX4938_DMA_CCR_LE 0x08000000
+#define TX4938_DMA_CCR_DBINH 0x04000000
+#define TX4938_DMA_CCR_SBINH 0x02000000
+#define TX4938_DMA_CCR_CHRST 0x01000000
+#define TX4938_DMA_CCR_RVBYTE 0x00800000
+#define TX4938_DMA_CCR_ACKPOL 0x00400000
+#define TX4938_DMA_CCR_REQPL 0x00200000
+#define TX4938_DMA_CCR_EGREQ 0x00100000
+#define TX4938_DMA_CCR_CHDN 0x00080000
+#define TX4938_DMA_CCR_DNCTL 0x00060000
+#define TX4938_DMA_CCR_EXTRQ 0x00010000
+#define TX4938_DMA_CCR_INTRQD 0x0000e000
+#define TX4938_DMA_CCR_INTENE 0x00001000
+#define TX4938_DMA_CCR_INTENC 0x00000800
+#define TX4938_DMA_CCR_INTENT 0x00000400
+#define TX4938_DMA_CCR_CHNEN 0x00000200
+#define TX4938_DMA_CCR_XFACT 0x00000100
+#define TX4938_DMA_CCR_SMPCHN 0x00000020
+#define TX4938_DMA_CCR_XFSZ(order) (((order) << 2) & 0x0000001c)
+#define TX4938_DMA_CCR_XFSZ_1W TX4938_DMA_CCR_XFSZ(2)
+#define TX4938_DMA_CCR_XFSZ_2W TX4938_DMA_CCR_XFSZ(3)
+#define TX4938_DMA_CCR_XFSZ_4W TX4938_DMA_CCR_XFSZ(4)
+#define TX4938_DMA_CCR_XFSZ_8W TX4938_DMA_CCR_XFSZ(5)
+#define TX4938_DMA_CCR_XFSZ_16W TX4938_DMA_CCR_XFSZ(6)
+#define TX4938_DMA_CCR_XFSZ_32W TX4938_DMA_CCR_XFSZ(7)
+#define TX4938_DMA_CCR_MEMIO 0x00000002
+#define TX4938_DMA_CCR_SNGAD 0x00000001
+
+/* bits for CSRn */
+#define TX4938_DMA_CSR_CHNEN 0x00000400
+#define TX4938_DMA_CSR_STLXFER 0x00000200
+#define TX4938_DMA_CSR_CHNACT 0x00000100
+#define TX4938_DMA_CSR_ABCHC 0x00000080
+#define TX4938_DMA_CSR_NCHNC 0x00000040
+#define TX4938_DMA_CSR_NTRNFC 0x00000020
+#define TX4938_DMA_CSR_EXTDN 0x00000010
+#define TX4938_DMA_CSR_CFERR 0x00000008
+#define TX4938_DMA_CSR_CHERR 0x00000004
+#define TX4938_DMA_CSR_DESERR 0x00000002
+#define TX4938_DMA_CSR_SORERR 0x00000001
+
+#define tx4938_sdramcptr tx4927_sdramcptr
+#define tx4938_ebuscptr tx4927_ebuscptr
+#define tx4938_pcicptr tx4927_pcicptr
+#define tx4938_pcic1ptr \
+ ((struct tx4927_pcic_reg __iomem *)TX4938_PCIC1_REG)
+#define tx4938_ccfgptr \
+ ((struct tx4938_ccfg_reg __iomem *)TX4938_CCFG_REG)
+#define tx4938_pioptr ((struct txx9_pio_reg __iomem *)TX4938_PIO_REG)
+#define tx4938_sramcptr \
+ ((struct tx4938_sramc_reg __iomem *)TX4938_SRAMC_REG)
+
+
+#define TX4938_REV_PCODE() \
+ ((__u32)__raw_readq(&tx4938_ccfgptr->crir) >> 16)
+
+#define tx4938_ccfg_clear(bits) tx4927_ccfg_clear(bits)
+#define tx4938_ccfg_set(bits) tx4927_ccfg_set(bits)
+#define tx4938_ccfg_change(change, new) tx4927_ccfg_change(change, new)
+
+#define TX4938_SDRAMC_CR(ch) TX4927_SDRAMC_CR(ch)
+#define TX4938_SDRAMC_BA(ch) TX4927_SDRAMC_BA(ch)
+#define TX4938_SDRAMC_SIZE(ch) TX4927_SDRAMC_SIZE(ch)
+
+#define TX4938_EBUSC_CR(ch) TX4927_EBUSC_CR(ch)
+#define TX4938_EBUSC_BA(ch) TX4927_EBUSC_BA(ch)
+#define TX4938_EBUSC_SIZE(ch) TX4927_EBUSC_SIZE(ch)
+#define TX4938_EBUSC_WIDTH(ch) TX4927_EBUSC_WIDTH(ch)
+
+#define tx4938_get_mem_size() tx4927_get_mem_size()
+void tx4938_wdt_init(void);
+void tx4938_setup(void);
+void tx4938_time_init(unsigned int tmrnr);
+void tx4938_sio_init(unsigned int sclk, unsigned int cts_mask);
+void tx4938_spi_init(int busid);
+void tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1);
+int tx4938_report_pciclk(void);
+void tx4938_report_pci1clk(void);
+int tx4938_pciclk66_setup(void);
+struct pci_dev;
+int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot);
+void tx4938_setup_pcierr_irq(void);
+void tx4938_irq_init(void);
+void tx4938_mtd_init(int ch);
+
+struct tx4938ide_platform_info {
+ /*
+ * I/O port shift, for platforms with ports that are
+ * constantly spaced and need larger than the 1-byte
+ * spacing used by ata_std_ports().
+ */
+ unsigned int ioport_shift;
+ unsigned int gbus_clock; /* 0 means no PIO mode tuning. */
+ unsigned int ebus_ch;
+};
+
+void tx4938_ata_init(unsigned int irq, unsigned int shift, int tune);
+
+#endif
diff --git a/arch/mips/include/asm/txx9/tx4939.h b/arch/mips/include/asm/txx9/tx4939.h
new file mode 100644
index 00000000000..88badb42301
--- /dev/null
+++ b/arch/mips/include/asm/txx9/tx4939.h
@@ -0,0 +1,545 @@
+/*
+ * Definitions for TX4939
+ *
+ * Copyright (C) 2000-2001,2005-2006 Toshiba Corporation
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_TXX9_TX4939_H
+#define __ASM_TXX9_TX4939_H
+
+/* some controllers are compatible with 4927/4938 */
+#include <asm/txx9/tx4938.h>
+
+#ifdef CONFIG_64BIT
+#define TX4939_REG_BASE 0xffffffffff1f0000UL /* == TX4938_REG_BASE */
+#else
+#define TX4939_REG_BASE 0xff1f0000UL /* == TX4938_REG_BASE */
+#endif
+#define TX4939_REG_SIZE 0x00010000 /* == TX4938_REG_SIZE */
+
+#define TX4939_ATA_REG(ch) (TX4939_REG_BASE + 0x3000 + (ch) * 0x1000)
+#define TX4939_NDFMC_REG (TX4939_REG_BASE + 0x5000)
+#define TX4939_SRAMC_REG (TX4939_REG_BASE + 0x6000)
+#define TX4939_CRYPTO_REG (TX4939_REG_BASE + 0x6800)
+#define TX4939_PCIC1_REG (TX4939_REG_BASE + 0x7000)
+#define TX4939_DDRC_REG (TX4939_REG_BASE + 0x8000)
+#define TX4939_EBUSC_REG (TX4939_REG_BASE + 0x9000)
+#define TX4939_VPC_REG (TX4939_REG_BASE + 0xa000)
+#define TX4939_DMA_REG(ch) (TX4939_REG_BASE + 0xb000 + (ch) * 0x800)
+#define TX4939_PCIC_REG (TX4939_REG_BASE + 0xd000)
+#define TX4939_CCFG_REG (TX4939_REG_BASE + 0xe000)
+#define TX4939_IRC_REG (TX4939_REG_BASE + 0xe800)
+#define TX4939_NR_TMR 6 /* 0xf000,0xf100,0xf200,0xfd00,0xfe00,0xff00 */
+#define TX4939_TMR_REG(ch) \
+ (TX4939_REG_BASE + 0xf000 + ((ch) + ((ch) >= 3) * 10) * 0x100)
+#define TX4939_NR_SIO 4 /* 0xf300, 0xf400, 0xf380, 0xf480 */
+#define TX4939_SIO_REG(ch) \
+ (TX4939_REG_BASE + 0xf300 + (((ch) & 1) << 8) + (((ch) & 2) << 6))
+#define TX4939_ACLC_REG (TX4939_REG_BASE + 0xf700)
+#define TX4939_SPI_REG (TX4939_REG_BASE + 0xf800)
+#define TX4939_I2C_REG (TX4939_REG_BASE + 0xf900)
+#define TX4939_I2S_REG (TX4939_REG_BASE + 0xfa00)
+#define TX4939_RTC_REG (TX4939_REG_BASE + 0xfb00)
+#define TX4939_CIR_REG (TX4939_REG_BASE + 0xfc00)
+
+struct tx4939_le_reg {
+ __u32 r;
+ __u32 unused;
+};
+
+struct tx4939_ddrc_reg {
+ struct tx4939_le_reg ctl[47];
+ __u64 unused0[17];
+ __u64 winen;
+ __u64 win[4];
+};
+
+struct tx4939_ccfg_reg {
+ __u64 ccfg;
+ __u64 crir;
+ __u64 pcfg;
+ __u64 toea;
+ __u64 clkctr;
+ __u64 unused0;
+ __u64 garbc;
+ __u64 unused1[2];
+ __u64 ramp;
+ __u64 unused2[2];
+ __u64 dskwctrl;
+ __u64 mclkosc;
+ __u64 mclkctl;
+ __u64 unused3[17];
+ struct {
+ __u64 mr;
+ __u64 dr;
+ } gpio[2];
+};
+
+struct tx4939_irc_reg {
+ struct tx4939_le_reg den;
+ struct tx4939_le_reg scipb;
+ struct tx4939_le_reg dm[2];
+ struct tx4939_le_reg lvl[16];
+ struct tx4939_le_reg msk;
+ struct tx4939_le_reg edc;
+ struct tx4939_le_reg pnd0;
+ struct tx4939_le_reg cs;
+ struct tx4939_le_reg pnd1;
+ struct tx4939_le_reg dm2[2];
+ struct tx4939_le_reg dbr[2];
+ struct tx4939_le_reg dben;
+ struct tx4939_le_reg unused0[2];
+ struct tx4939_le_reg flag[2];
+ struct tx4939_le_reg pol;
+ struct tx4939_le_reg cnt;
+ struct tx4939_le_reg maskint;
+ struct tx4939_le_reg maskext;
+};
+
+struct tx4939_rtc_reg {
+ __u32 ctl;
+ __u32 adr;
+ __u32 dat;
+ __u32 tbc;
+};
+
+struct tx4939_crypto_reg {
+ struct tx4939_le_reg csr;
+ struct tx4939_le_reg idesptr;
+ struct tx4939_le_reg cdesptr;
+ struct tx4939_le_reg buserr;
+ struct tx4939_le_reg cip_tout;
+ struct tx4939_le_reg cir;
+ union {
+ struct {
+ struct tx4939_le_reg data[8];
+ struct tx4939_le_reg ctrl;
+ } gen;
+ struct {
+ struct {
+ struct tx4939_le_reg l;
+ struct tx4939_le_reg u;
+ } key[3], ini;
+ struct tx4939_le_reg ctrl;
+ } des;
+ struct {
+ struct tx4939_le_reg key[4];
+ struct tx4939_le_reg ini[4];
+ struct tx4939_le_reg ctrl;
+ } aes;
+ struct {
+ struct {
+ struct tx4939_le_reg l;
+ struct tx4939_le_reg u;
+ } cnt;
+ struct tx4939_le_reg ini[5];
+ struct tx4939_le_reg unused;
+ struct tx4939_le_reg ctrl;
+ } hash;
+ } cdr;
+ struct tx4939_le_reg unused0[7];
+ struct tx4939_le_reg rcsr;
+ struct tx4939_le_reg rpr;
+ __u64 rdr;
+ __u64 ror[3];
+ struct tx4939_le_reg unused1[2];
+ struct tx4939_le_reg xorslr;
+ struct tx4939_le_reg xorsur;
+};
+
+struct tx4939_crypto_desc {
+ __u32 src;
+ __u32 dst;
+ __u32 next;
+ __u32 ctrl;
+ __u32 index;
+ __u32 xor;
+};
+
+struct tx4939_vpc_reg {
+ struct tx4939_le_reg csr;
+ struct {
+ struct tx4939_le_reg ctrlA;
+ struct tx4939_le_reg ctrlB;
+ struct tx4939_le_reg idesptr;
+ struct tx4939_le_reg cdesptr;
+ } port[3];
+ struct tx4939_le_reg buserr;
+};
+
+struct tx4939_vpc_desc {
+ __u32 src;
+ __u32 next;
+ __u32 ctrl1;
+ __u32 ctrl2;
+};
+
+/*
+ * IRC
+ */
+#define TX4939_IR_NONE 0
+#define TX4939_IR_DDR 1
+#define TX4939_IR_WTOERR 2
+#define TX4939_NUM_IR_INT 3
+#define TX4939_IR_INT(n) (3 + (n))
+#define TX4939_NUM_IR_ETH 2
+#define TX4939_IR_ETH(n) ((n) ? 43 : 6)
+#define TX4939_IR_VIDEO 7
+#define TX4939_IR_CIR 8
+#define TX4939_NUM_IR_SIO 4
+#define TX4939_IR_SIO(n) ((n) ? 43 + (n) : 9) /* 9,44-46 */
+#define TX4939_NUM_IR_DMA 4
+#define TX4939_IR_DMA(ch, n) (((ch) ? 22 : 10) + (n)) /* 10-13,22-25 */
+#define TX4939_IR_IRC 14
+#define TX4939_IR_PDMAC 15
+#define TX4939_NUM_IR_TMR 6
+#define TX4939_IR_TMR(n) (((n) >= 3 ? 45 : 16) + (n)) /* 16-18,48-50 */
+#define TX4939_NUM_IR_ATA 2
+#define TX4939_IR_ATA(n) (19 + (n))
+#define TX4939_IR_ACLC 21
+#define TX4939_IR_CIPHER 26
+#define TX4939_IR_INTA 27
+#define TX4939_IR_INTB 28
+#define TX4939_IR_INTC 29
+#define TX4939_IR_INTD 30
+#define TX4939_IR_I2C 33
+#define TX4939_IR_SPI 34
+#define TX4939_IR_PCIC 35
+#define TX4939_IR_PCIC1 36
+#define TX4939_IR_PCIERR 37
+#define TX4939_IR_PCIPME 38
+#define TX4939_IR_NDFMC 39
+#define TX4939_IR_ACLCPME 40
+#define TX4939_IR_RTC 41
+#define TX4939_IR_RND 42
+#define TX4939_IR_I2S 47
+#define TX4939_NUM_IR 64
+
+#define TX4939_IRC_INT 2 /* IP[2] in Status register */
+
+/*
+ * CCFG
+ */
+/* CCFG : Chip Configuration */
+#define TX4939_CCFG_PCIBOOT 0x0000040000000000ULL
+#define TX4939_CCFG_WDRST 0x0000020000000000ULL
+#define TX4939_CCFG_WDREXEN 0x0000010000000000ULL
+#define TX4939_CCFG_BCFG_MASK 0x000000ff00000000ULL
+#define TX4939_CCFG_GTOT_MASK 0x06000000
+#define TX4939_CCFG_GTOT_4096 0x06000000
+#define TX4939_CCFG_GTOT_2048 0x04000000
+#define TX4939_CCFG_GTOT_1024 0x02000000
+#define TX4939_CCFG_GTOT_512 0x00000000
+#define TX4939_CCFG_TINTDIS 0x01000000
+#define TX4939_CCFG_PCI66 0x00800000
+#define TX4939_CCFG_PCIMODE 0x00400000
+#define TX4939_CCFG_SSCG 0x00100000
+#define TX4939_CCFG_MULCLK_MASK 0x000e0000
+#define TX4939_CCFG_MULCLK_8 (0x7 << 17)
+#define TX4939_CCFG_MULCLK_9 (0x0 << 17)
+#define TX4939_CCFG_MULCLK_10 (0x1 << 17)
+#define TX4939_CCFG_MULCLK_11 (0x2 << 17)
+#define TX4939_CCFG_MULCLK_12 (0x3 << 17)
+#define TX4939_CCFG_MULCLK_13 (0x4 << 17)
+#define TX4939_CCFG_MULCLK_14 (0x5 << 17)
+#define TX4939_CCFG_MULCLK_15 (0x6 << 17)
+#define TX4939_CCFG_BEOW 0x00010000
+#define TX4939_CCFG_WR 0x00008000
+#define TX4939_CCFG_TOE 0x00004000
+#define TX4939_CCFG_PCIARB 0x00002000
+#define TX4939_CCFG_YDIVMODE_MASK 0x00001c00
+#define TX4939_CCFG_YDIVMODE_2 (0x0 << 10)
+#define TX4939_CCFG_YDIVMODE_3 (0x1 << 10)
+#define TX4939_CCFG_YDIVMODE_5 (0x6 << 10)
+#define TX4939_CCFG_YDIVMODE_6 (0x7 << 10)
+#define TX4939_CCFG_PTSEL 0x00000200
+#define TX4939_CCFG_BESEL 0x00000100
+#define TX4939_CCFG_SYSSP_MASK 0x000000c0
+#define TX4939_CCFG_ACKSEL 0x00000020
+#define TX4939_CCFG_ROMW 0x00000010
+#define TX4939_CCFG_ENDIAN 0x00000004
+#define TX4939_CCFG_ARMODE 0x00000002
+#define TX4939_CCFG_ACEHOLD 0x00000001
+
+/* PCFG : Pin Configuration */
+#define TX4939_PCFG_SIO2MODE_MASK 0xc000000000000000ULL
+#define TX4939_PCFG_SIO2MODE_GPIO 0x8000000000000000ULL
+#define TX4939_PCFG_SIO2MODE_SIO2 0x4000000000000000ULL
+#define TX4939_PCFG_SIO2MODE_SIO0 0x0000000000000000ULL
+#define TX4939_PCFG_SPIMODE 0x2000000000000000ULL
+#define TX4939_PCFG_I2CMODE 0x1000000000000000ULL
+#define TX4939_PCFG_I2SMODE_MASK 0x0c00000000000000ULL
+#define TX4939_PCFG_I2SMODE_GPIO 0x0c00000000000000ULL
+#define TX4939_PCFG_I2SMODE_I2S 0x0800000000000000ULL
+#define TX4939_PCFG_I2SMODE_I2S_ALT 0x0400000000000000ULL
+#define TX4939_PCFG_I2SMODE_ACLC 0x0000000000000000ULL
+#define TX4939_PCFG_SIO3MODE 0x0200000000000000ULL
+#define TX4939_PCFG_DMASEL3 0x0004000000000000ULL
+#define TX4939_PCFG_DMASEL3_SIO0 0x0004000000000000ULL
+#define TX4939_PCFG_DMASEL3_NDFC 0x0000000000000000ULL
+#define TX4939_PCFG_VSSMODE 0x0000200000000000ULL
+#define TX4939_PCFG_VPSMODE 0x0000100000000000ULL
+#define TX4939_PCFG_ET1MODE 0x0000080000000000ULL
+#define TX4939_PCFG_ET0MODE 0x0000040000000000ULL
+#define TX4939_PCFG_ATA1MODE 0x0000020000000000ULL
+#define TX4939_PCFG_ATA0MODE 0x0000010000000000ULL
+#define TX4939_PCFG_BP_PLL 0x0000000100000000ULL
+
+#define TX4939_PCFG_SYSCLKEN 0x08000000
+#define TX4939_PCFG_PCICLKEN_ALL 0x000f0000
+#define TX4939_PCFG_PCICLKEN(ch) (0x00010000<<(ch))
+#define TX4939_PCFG_SPEED1 0x00002000
+#define TX4939_PCFG_SPEED0 0x00001000
+#define TX4939_PCFG_ITMODE 0x00000300
+#define TX4939_PCFG_DMASEL_ALL (0x00000007 | TX4939_PCFG_DMASEL3)
+#define TX4939_PCFG_DMASEL2 0x00000004
+#define TX4939_PCFG_DMASEL2_DRQ2 0x00000000
+#define TX4939_PCFG_DMASEL2_SIO0 0x00000004
+#define TX4939_PCFG_DMASEL1 0x00000002
+#define TX4939_PCFG_DMASEL1_DRQ1 0x00000000
+#define TX4939_PCFG_DMASEL0 0x00000001
+#define TX4939_PCFG_DMASEL0_DRQ0 0x00000000
+
+/* CLKCTR : Clock Control */
+#define TX4939_CLKCTR_IOSCKD 0x8000000000000000ULL
+#define TX4939_CLKCTR_SYSCKD 0x4000000000000000ULL
+#define TX4939_CLKCTR_TM5CKD 0x2000000000000000ULL
+#define TX4939_CLKCTR_TM4CKD 0x1000000000000000ULL
+#define TX4939_CLKCTR_TM3CKD 0x0800000000000000ULL
+#define TX4939_CLKCTR_CIRCKD 0x0400000000000000ULL
+#define TX4939_CLKCTR_SIO3CKD 0x0200000000000000ULL
+#define TX4939_CLKCTR_SIO2CKD 0x0100000000000000ULL
+#define TX4939_CLKCTR_SIO1CKD 0x0080000000000000ULL
+#define TX4939_CLKCTR_VPCCKD 0x0040000000000000ULL
+#define TX4939_CLKCTR_EPCICKD 0x0020000000000000ULL
+#define TX4939_CLKCTR_ETH1CKD 0x0008000000000000ULL
+#define TX4939_CLKCTR_ATA1CKD 0x0004000000000000ULL
+#define TX4939_CLKCTR_BROMCKD 0x0002000000000000ULL
+#define TX4939_CLKCTR_NDCCKD 0x0001000000000000ULL
+#define TX4939_CLKCTR_I2CCKD 0x0000800000000000ULL
+#define TX4939_CLKCTR_ETH0CKD 0x0000400000000000ULL
+#define TX4939_CLKCTR_SPICKD 0x0000200000000000ULL
+#define TX4939_CLKCTR_SRAMCKD 0x0000100000000000ULL
+#define TX4939_CLKCTR_PCI1CKD 0x0000080000000000ULL
+#define TX4939_CLKCTR_DMA1CKD 0x0000040000000000ULL
+#define TX4939_CLKCTR_ACLCKD 0x0000020000000000ULL
+#define TX4939_CLKCTR_ATA0CKD 0x0000010000000000ULL
+#define TX4939_CLKCTR_DMA0CKD 0x0000008000000000ULL
+#define TX4939_CLKCTR_PCICCKD 0x0000004000000000ULL
+#define TX4939_CLKCTR_I2SCKD 0x0000002000000000ULL
+#define TX4939_CLKCTR_TM0CKD 0x0000001000000000ULL
+#define TX4939_CLKCTR_TM1CKD 0x0000000800000000ULL
+#define TX4939_CLKCTR_TM2CKD 0x0000000400000000ULL
+#define TX4939_CLKCTR_SIO0CKD 0x0000000200000000ULL
+#define TX4939_CLKCTR_CYPCKD 0x0000000100000000ULL
+#define TX4939_CLKCTR_IOSRST 0x80000000
+#define TX4939_CLKCTR_SYSRST 0x40000000
+#define TX4939_CLKCTR_TM5RST 0x20000000
+#define TX4939_CLKCTR_TM4RST 0x10000000
+#define TX4939_CLKCTR_TM3RST 0x08000000
+#define TX4939_CLKCTR_CIRRST 0x04000000
+#define TX4939_CLKCTR_SIO3RST 0x02000000
+#define TX4939_CLKCTR_SIO2RST 0x01000000
+#define TX4939_CLKCTR_SIO1RST 0x00800000
+#define TX4939_CLKCTR_VPCRST 0x00400000
+#define TX4939_CLKCTR_EPCIRST 0x00200000
+#define TX4939_CLKCTR_ETH1RST 0x00080000
+#define TX4939_CLKCTR_ATA1RST 0x00040000
+#define TX4939_CLKCTR_BROMRST 0x00020000
+#define TX4939_CLKCTR_NDCRST 0x00010000
+#define TX4939_CLKCTR_I2CRST 0x00008000
+#define TX4939_CLKCTR_ETH0RST 0x00004000
+#define TX4939_CLKCTR_SPIRST 0x00002000
+#define TX4939_CLKCTR_SRAMRST 0x00001000
+#define TX4939_CLKCTR_PCI1RST 0x00000800
+#define TX4939_CLKCTR_DMA1RST 0x00000400
+#define TX4939_CLKCTR_ACLRST 0x00000200
+#define TX4939_CLKCTR_ATA0RST 0x00000100
+#define TX4939_CLKCTR_DMA0RST 0x00000080
+#define TX4939_CLKCTR_PCICRST 0x00000040
+#define TX4939_CLKCTR_I2SRST 0x00000020
+#define TX4939_CLKCTR_TM0RST 0x00000010
+#define TX4939_CLKCTR_TM1RST 0x00000008
+#define TX4939_CLKCTR_TM2RST 0x00000004
+#define TX4939_CLKCTR_SIO0RST 0x00000002
+#define TX4939_CLKCTR_CYPRST 0x00000001
+
+/*
+ * RTC
+ */
+#define TX4939_RTCCTL_ALME 0x00000080
+#define TX4939_RTCCTL_ALMD 0x00000040
+#define TX4939_RTCCTL_BUSY 0x00000020
+
+#define TX4939_RTCCTL_COMMAND 0x00000007
+#define TX4939_RTCCTL_COMMAND_NOP 0x00000000
+#define TX4939_RTCCTL_COMMAND_GETTIME 0x00000001
+#define TX4939_RTCCTL_COMMAND_SETTIME 0x00000002
+#define TX4939_RTCCTL_COMMAND_GETALARM 0x00000003
+#define TX4939_RTCCTL_COMMAND_SETALARM 0x00000004
+
+#define TX4939_RTCTBC_PM 0x00000080
+#define TX4939_RTCTBC_COMP 0x0000007f
+
+#define TX4939_RTC_REG_RAMSIZE 0x00000100
+#define TX4939_RTC_REG_RWBSIZE 0x00000006
+
+/*
+ * CRYPTO
+ */
+#define TX4939_CRYPTO_CSR_SAESO 0x08000000
+#define TX4939_CRYPTO_CSR_SAESI 0x04000000
+#define TX4939_CRYPTO_CSR_SDESO 0x02000000
+#define TX4939_CRYPTO_CSR_SDESI 0x01000000
+#define TX4939_CRYPTO_CSR_INDXBST_MASK 0x00700000
+#define TX4939_CRYPTO_CSR_INDXBST(n) ((n) << 20)
+#define TX4939_CRYPTO_CSR_TOINT 0x00080000
+#define TX4939_CRYPTO_CSR_DCINT 0x00040000
+#define TX4939_CRYPTO_CSR_GBINT 0x00010000
+#define TX4939_CRYPTO_CSR_INDXAST_MASK 0x0000e000
+#define TX4939_CRYPTO_CSR_INDXAST(n) ((n) << 13)
+#define TX4939_CRYPTO_CSR_CSWAP_MASK 0x00001800
+#define TX4939_CRYPTO_CSR_CSWAP_NONE 0x00000000
+#define TX4939_CRYPTO_CSR_CSWAP_IN 0x00000800
+#define TX4939_CRYPTO_CSR_CSWAP_OUT 0x00001000
+#define TX4939_CRYPTO_CSR_CSWAP_BOTH 0x00001800
+#define TX4939_CRYPTO_CSR_CDIV_MASK 0x00000600
+#define TX4939_CRYPTO_CSR_CDIV_DIV2 0x00000000
+#define TX4939_CRYPTO_CSR_CDIV_DIV1 0x00000200
+#define TX4939_CRYPTO_CSR_CDIV_DIV2ALT 0x00000400
+#define TX4939_CRYPTO_CSR_CDIV_DIV1ALT 0x00000600
+#define TX4939_CRYPTO_CSR_PDINT_MASK 0x000000c0
+#define TX4939_CRYPTO_CSR_PDINT_ALL 0x00000000
+#define TX4939_CRYPTO_CSR_PDINT_END 0x00000040
+#define TX4939_CRYPTO_CSR_PDINT_NEXT 0x00000080
+#define TX4939_CRYPTO_CSR_PDINT_NONE 0x000000c0
+#define TX4939_CRYPTO_CSR_GINTE 0x00000008
+#define TX4939_CRYPTO_CSR_RSTD 0x00000004
+#define TX4939_CRYPTO_CSR_RSTC 0x00000002
+#define TX4939_CRYPTO_CSR_ENCR 0x00000001
+
+/* bits for tx4939_crypto_reg.cdr.gen.ctrl */
+#define TX4939_CRYPTO_CTX_ENGINE_MASK 0x00000003
+#define TX4939_CRYPTO_CTX_ENGINE_DES 0x00000000
+#define TX4939_CRYPTO_CTX_ENGINE_AES 0x00000001
+#define TX4939_CRYPTO_CTX_ENGINE_MD5 0x00000002
+#define TX4939_CRYPTO_CTX_ENGINE_SHA1 0x00000003
+#define TX4939_CRYPTO_CTX_TDMS 0x00000010
+#define TX4939_CRYPTO_CTX_CMS 0x00000020
+#define TX4939_CRYPTO_CTX_DMS 0x00000040
+#define TX4939_CRYPTO_CTX_UPDATE 0x00000080
+
+/* bits for tx4939_crypto_desc.ctrl */
+#define TX4939_CRYPTO_DESC_OB_CNT_MASK 0xffe00000
+#define TX4939_CRYPTO_DESC_OB_CNT(cnt) ((cnt) << 21)
+#define TX4939_CRYPTO_DESC_IB_CNT_MASK 0x001ffc00
+#define TX4939_CRYPTO_DESC_IB_CNT(cnt) ((cnt) << 10)
+#define TX4939_CRYPTO_DESC_START 0x00000200
+#define TX4939_CRYPTO_DESC_END 0x00000100
+#define TX4939_CRYPTO_DESC_XOR 0x00000010
+#define TX4939_CRYPTO_DESC_LAST 0x00000008
+#define TX4939_CRYPTO_DESC_ERR_MASK 0x00000006
+#define TX4939_CRYPTO_DESC_ERR_NONE 0x00000000
+#define TX4939_CRYPTO_DESC_ERR_TOUT 0x00000002
+#define TX4939_CRYPTO_DESC_ERR_DIGEST 0x00000004
+#define TX4939_CRYPTO_DESC_OWN 0x00000001
+
+/* bits for tx4939_crypto_desc.index */
+#define TX4939_CRYPTO_DESC_HASH_IDX_MASK 0x00000070
+#define TX4939_CRYPTO_DESC_HASH_IDX(idx) ((idx) << 4)
+#define TX4939_CRYPTO_DESC_ENCRYPT_IDX_MASK 0x00000007
+#define TX4939_CRYPTO_DESC_ENCRYPT_IDX(idx) ((idx) << 0)
+
+#define TX4939_CRYPTO_NR_SET 6
+
+#define TX4939_CRYPTO_RCSR_INTE 0x00000008
+#define TX4939_CRYPTO_RCSR_RST 0x00000004
+#define TX4939_CRYPTO_RCSR_FIN 0x00000002
+#define TX4939_CRYPTO_RCSR_ST 0x00000001
+
+/*
+ * VPC
+ */
+#define TX4939_VPC_CSR_GBINT 0x00010000
+#define TX4939_VPC_CSR_SWAPO 0x00000020
+#define TX4939_VPC_CSR_SWAPI 0x00000010
+#define TX4939_VPC_CSR_GINTE 0x00000008
+#define TX4939_VPC_CSR_RSTD 0x00000004
+#define TX4939_VPC_CSR_RSTVPC 0x00000002
+
+#define TX4939_VPC_CTRLA_VDPSN 0x00000200
+#define TX4939_VPC_CTRLA_PBUSY 0x00000100
+#define TX4939_VPC_CTRLA_DCINT 0x00000080
+#define TX4939_VPC_CTRLA_UOINT 0x00000040
+#define TX4939_VPC_CTRLA_PDINT_MASK 0x00000030
+#define TX4939_VPC_CTRLA_PDINT_ALL 0x00000000
+#define TX4939_VPC_CTRLA_PDINT_NEXT 0x00000010
+#define TX4939_VPC_CTRLA_PDINT_NONE 0x00000030
+#define TX4939_VPC_CTRLA_VDVLDP 0x00000008
+#define TX4939_VPC_CTRLA_VDMODE 0x00000004
+#define TX4939_VPC_CTRLA_VDFOR 0x00000002
+#define TX4939_VPC_CTRLA_ENVPC 0x00000001
+
+/* bits for tx4939_vpc_desc.ctrl1 */
+#define TX4939_VPC_DESC_CTRL1_ERR_MASK 0x00000006
+#define TX4939_VPC_DESC_CTRL1_OWN 0x00000001
+
+#define tx4939_ddrcptr ((struct tx4939_ddrc_reg __iomem *)TX4939_DDRC_REG)
+#define tx4939_ebuscptr tx4938_ebuscptr
+#define tx4939_ircptr \
+ ((struct tx4939_irc_reg __iomem *)TX4939_IRC_REG)
+#define tx4939_pcicptr tx4938_pcicptr
+#define tx4939_pcic1ptr tx4938_pcic1ptr
+#define tx4939_ccfgptr \
+ ((struct tx4939_ccfg_reg __iomem *)TX4939_CCFG_REG)
+#define tx4939_sramcptr tx4938_sramcptr
+#define tx4939_rtcptr \
+ ((struct tx4939_rtc_reg __iomem *)TX4939_RTC_REG)
+#define tx4939_cryptoptr \
+ ((struct tx4939_crypto_reg __iomem *)TX4939_CRYPTO_REG)
+#define tx4939_vpcptr ((struct tx4939_vpc_reg __iomem *)TX4939_VPC_REG)
+
+#define TX4939_REV_MAJ_MIN() \
+ ((__u32)__raw_readq(&tx4939_ccfgptr->crir) & 0x00ff)
+#define TX4939_REV_PCODE() \
+ ((__u32)__raw_readq(&tx4939_ccfgptr->crir) >> 16)
+#define TX4939_CCFG_BCFG() \
+ ((__u32)((__raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_BCFG_MASK) \
+ >> 32))
+
+#define tx4939_ccfg_clear(bits) tx4938_ccfg_clear(bits)
+#define tx4939_ccfg_set(bits) tx4938_ccfg_set(bits)
+#define tx4939_ccfg_change(change, new) tx4938_ccfg_change(change, new)
+
+#define TX4939_EBUSC_CR(ch) TX4927_EBUSC_CR(ch)
+#define TX4939_EBUSC_BA(ch) TX4927_EBUSC_BA(ch)
+#define TX4939_EBUSC_SIZE(ch) TX4927_EBUSC_SIZE(ch)
+#define TX4939_EBUSC_WIDTH(ch) \
+ (16 >> ((__u32)(TX4939_EBUSC_CR(ch) >> 20) & 0x1))
+
+/* SCLK0 = MSTCLK * 429/19 * 16/245 / 2 (14.745MHz for MST 20MHz) */
+#define TX4939_SCLK0(mst) \
+ ((((mst) + 245/2) / 245UL * 429 * 16 + 19) / 19 / 2)
+
+void tx4939_wdt_init(void);
+void tx4939_add_memory_regions(void);
+void tx4939_setup(void);
+void tx4939_time_init(unsigned int tmrnr);
+void tx4939_sio_init(unsigned int sclk, unsigned int cts_mask);
+void tx4939_spi_init(int busid);
+void tx4939_ethaddr_init(unsigned char *addr0, unsigned char *addr1);
+int tx4939_report_pciclk(void);
+void tx4939_report_pci1clk(void);
+struct pci_dev;
+int tx4939_pcic1_map_irq(const struct pci_dev *dev, u8 slot);
+int tx4939_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+void tx4939_setup_pcierr_irq(void);
+void tx4939_irq_init(void);
+int tx4939_irq(void);
+void tx4939_mtd_init(int ch);
+void tx4939_ata_init(void);
+
+#endif /* __ASM_TXX9_TX4939_H */
diff --git a/arch/mips/include/asm/txx9irq.h b/arch/mips/include/asm/txx9irq.h
new file mode 100644
index 00000000000..5620879be37
--- /dev/null
+++ b/arch/mips/include/asm/txx9irq.h
@@ -0,0 +1,34 @@
+/*
+ * include/asm-mips/txx9irq.h
+ * TX39/TX49 interrupt controller definitions.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_TXX9IRQ_H
+#define __ASM_TXX9IRQ_H
+
+#include <irq.h>
+
+#ifdef CONFIG_IRQ_CPU
+#define TXX9_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8)
+#else
+#ifdef CONFIG_I8259
+#define TXX9_IRQ_BASE (I8259A_IRQ_BASE + 16)
+#else
+#define TXX9_IRQ_BASE 0
+#endif
+#endif
+
+#ifdef CONFIG_CPU_TX39XX
+#define TXx9_MAX_IR 16
+#else
+#define TXx9_MAX_IR 32
+#endif
+
+void txx9_irq_init(unsigned long baseaddr);
+int txx9_irq(void);
+int txx9_irq_set_pri(int irc_irq, int new_pri);
+
+#endif /* __ASM_TXX9IRQ_H */
diff --git a/arch/mips/include/asm/txx9pio.h b/arch/mips/include/asm/txx9pio.h
new file mode 100644
index 00000000000..3d6fa9f8d51
--- /dev/null
+++ b/arch/mips/include/asm/txx9pio.h
@@ -0,0 +1,29 @@
+/*
+ * include/asm-mips/txx9pio.h
+ * TX39/TX49 PIO controller definitions.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_TXX9PIO_H
+#define __ASM_TXX9PIO_H
+
+#include <linux/types.h>
+
+struct txx9_pio_reg {
+ __u32 dout;
+ __u32 din;
+ __u32 dir;
+ __u32 od;
+ __u32 flag[2];
+ __u32 pol;
+ __u32 intc;
+ __u32 maskcpu;
+ __u32 maskext;
+};
+
+int txx9_gpio_init(unsigned long baseaddr,
+ unsigned int base, unsigned int num);
+
+#endif /* __ASM_TXX9PIO_H */
diff --git a/arch/mips/include/asm/txx9tmr.h b/arch/mips/include/asm/txx9tmr.h
new file mode 100644
index 00000000000..67f70a8f09b
--- /dev/null
+++ b/arch/mips/include/asm/txx9tmr.h
@@ -0,0 +1,67 @@
+/*
+ * include/asm-mips/txx9tmr.h
+ * TX39/TX49 timer controller definitions.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_TXX9TMR_H
+#define __ASM_TXX9TMR_H
+
+#include <linux/types.h>
+
+struct txx9_tmr_reg {
+ u32 tcr;
+ u32 tisr;
+ u32 cpra;
+ u32 cprb;
+ u32 itmr;
+ u32 unused0[3];
+ u32 ccdr;
+ u32 unused1[3];
+ u32 pgmr;
+ u32 unused2[3];
+ u32 wtmr;
+ u32 unused3[43];
+ u32 trr;
+};
+
+/* TMTCR : Timer Control */
+#define TXx9_TMTCR_TCE 0x00000080
+#define TXx9_TMTCR_CCDE 0x00000040
+#define TXx9_TMTCR_CRE 0x00000020
+#define TXx9_TMTCR_ECES 0x00000008
+#define TXx9_TMTCR_CCS 0x00000004
+#define TXx9_TMTCR_TMODE_MASK 0x00000003
+#define TXx9_TMTCR_TMODE_ITVL 0x00000000
+#define TXx9_TMTCR_TMODE_PGEN 0x00000001
+#define TXx9_TMTCR_TMODE_WDOG 0x00000002
+
+/* TMTISR : Timer Int. Status */
+#define TXx9_TMTISR_TPIBS 0x00000004
+#define TXx9_TMTISR_TPIAS 0x00000002
+#define TXx9_TMTISR_TIIS 0x00000001
+
+/* TMITMR : Interval Timer Mode */
+#define TXx9_TMITMR_TIIE 0x00008000
+#define TXx9_TMITMR_TZCE 0x00000001
+
+/* TMWTMR : Watchdog Timer Mode */
+#define TXx9_TMWTMR_TWIE 0x00008000
+#define TXx9_TMWTMR_WDIS 0x00000080
+#define TXx9_TMWTMR_TWC 0x00000001
+
+void txx9_clocksource_init(unsigned long baseaddr,
+ unsigned int imbusclk);
+void txx9_clockevent_init(unsigned long baseaddr, int irq,
+ unsigned int imbusclk);
+void txx9_tmr_init(unsigned long baseaddr);
+
+#ifdef CONFIG_CPU_TX39XX
+#define TXX9_TIMER_BITS 24
+#else
+#define TXX9_TIMER_BITS 32
+#endif
+
+#endif /* __ASM_TXX9TMR_H */
diff --git a/arch/mips/include/asm/types.h b/arch/mips/include/asm/types.h
new file mode 100644
index 00000000000..bcbb8d675af
--- /dev/null
+++ b/arch/mips/include/asm/types.h
@@ -0,0 +1,54 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995, 1996, 1999 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_TYPES_H
+#define _ASM_TYPES_H
+
+#if _MIPS_SZLONG == 64
+# include <asm-generic/int-l64.h>
+#else
+# include <asm-generic/int-ll64.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG _MIPS_SZLONG
+
+#ifndef __ASSEMBLY__
+
+#if (defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) \
+ || defined(CONFIG_64BIT)
+typedef u64 dma_addr_t;
+#else
+typedef u32 dma_addr_t;
+#endif
+typedef u64 dma64_addr_t;
+
+/*
+ * Don't use phys_t. You've been warned.
+ */
+#ifdef CONFIG_64BIT_PHYS_ADDR
+typedef unsigned long long phys_t;
+#else
+typedef unsigned long phys_t;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_TYPES_H */
diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h
new file mode 100644
index 00000000000..09ff5bb1744
--- /dev/null
+++ b/arch/mips/include/asm/uaccess.h
@@ -0,0 +1,1114 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1997, 1998, 1999, 2000, 03, 04 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2007 Maciej W. Rozycki
+ */
+#ifndef _ASM_UACCESS_H
+#define _ASM_UACCESS_H
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/thread_info.h>
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not. If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+#ifdef CONFIG_32BIT
+
+#define __UA_LIMIT 0x80000000UL
+
+#define __UA_ADDR ".word"
+#define __UA_LA "la"
+#define __UA_ADDU "addu"
+#define __UA_t0 "$8"
+#define __UA_t1 "$9"
+
+#endif /* CONFIG_32BIT */
+
+#ifdef CONFIG_64BIT
+
+#define __UA_LIMIT (- TASK_SIZE)
+
+#define __UA_ADDR ".dword"
+#define __UA_LA "dla"
+#define __UA_ADDU "daddu"
+#define __UA_t0 "$12"
+#define __UA_t1 "$13"
+
+#endif /* CONFIG_64BIT */
+
+/*
+ * USER_DS is a bitmask that has the bits set that may not be set in a valid
+ * userspace address. Note that we limit 32-bit userspace to 0x7fff8000 but
+ * the arithmetic we're doing only works if the limit is a power of two, so
+ * we use 0x80000000 here on 32-bit kernels. If a process passes an invalid
+ * address in this range it's the process's problem, not ours :-)
+ */
+
+#define KERNEL_DS ((mm_segment_t) { 0UL })
+#define USER_DS ((mm_segment_t) { __UA_LIMIT })
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+#define get_ds() (KERNEL_DS)
+#define get_fs() (current_thread_info()->addr_limit)
+#define set_fs(x) (current_thread_info()->addr_limit = (x))
+
+#define segment_eq(a, b) ((a).seg == (b).seg)
+
+
+/*
+ * Is a address valid? This does a straighforward calculation rather
+ * than tests.
+ *
+ * Address valid if:
+ * - "addr" doesn't have any high-bits set
+ * - AND "size" doesn't have any high-bits set
+ * - AND "addr+size" doesn't have any high-bits set
+ * - OR we are in kernel mode.
+ *
+ * __ua_size() is a trick to avoid runtime checking of positive constant
+ * sizes; for those we already know at compile time that the size is ok.
+ */
+#define __ua_size(size) \
+ ((__builtin_constant_p(size) && (signed long) (size) > 0) ? 0 : (size))
+
+/*
+ * access_ok: - Checks if a user space pointer is valid
+ * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE. Note that
+ * %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe
+ * to write to a block, it is always safe to read from it.
+ * @addr: User space pointer to start of block to check
+ * @size: Size of block to check
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * Checks if a pointer to a block of memory in user space is valid.
+ *
+ * Returns true (nonzero) if the memory block may be valid, false (zero)
+ * if it is definitely invalid.
+ *
+ * Note that, depending on architecture, this function probably just
+ * checks that the pointer is in the user space range - after calling
+ * this function, memory access functions may still return -EFAULT.
+ */
+
+#define __access_mask get_fs().seg
+
+#define __access_ok(addr, size, mask) \
+ (((signed long)((mask) & ((addr) | ((addr) + (size)) | __ua_size(size)))) == 0)
+
+#define access_ok(type, addr, size) \
+ likely(__access_ok((unsigned long)(addr), (size), __access_mask))
+
+/*
+ * put_user: - Write a simple value into user space.
+ * @x: Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space. It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define put_user(x,ptr) \
+ __put_user_check((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * get_user: - Get a simple variable from user space.
+ * @x: Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space. It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#define get_user(x,ptr) \
+ __get_user_check((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * __put_user: - Write a simple value into user space, with less checking.
+ * @x: Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space. It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define __put_user(x,ptr) \
+ __put_user_nocheck((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * __get_user: - Get a simple variable from user space, with less checking.
+ * @x: Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space. It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#define __get_user(x,ptr) \
+ __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct __user *)(x))
+
+/*
+ * Yuck. We need two variants, one for 64bit operation and one
+ * for 32 bit mode and old iron.
+ */
+#ifdef CONFIG_32BIT
+#define __GET_USER_DW(val, ptr) __get_user_asm_ll32(val, ptr)
+#endif
+#ifdef CONFIG_64BIT
+#define __GET_USER_DW(val, ptr) __get_user_asm(val, "ld", ptr)
+#endif
+
+extern void __get_user_unknown(void);
+
+#define __get_user_common(val, size, ptr) \
+do { \
+ switch (size) { \
+ case 1: __get_user_asm(val, "lb", ptr); break; \
+ case 2: __get_user_asm(val, "lh", ptr); break; \
+ case 4: __get_user_asm(val, "lw", ptr); break; \
+ case 8: __GET_USER_DW(val, ptr); break; \
+ default: __get_user_unknown(); break; \
+ } \
+} while (0)
+
+#define __get_user_nocheck(x, ptr, size) \
+({ \
+ int __gu_err; \
+ \
+ __get_user_common((x), size, ptr); \
+ __gu_err; \
+})
+
+#define __get_user_check(x, ptr, size) \
+({ \
+ int __gu_err = -EFAULT; \
+ const __typeof__(*(ptr)) __user * __gu_ptr = (ptr); \
+ \
+ if (likely(access_ok(VERIFY_READ, __gu_ptr, size))) \
+ __get_user_common((x), size, __gu_ptr); \
+ \
+ __gu_err; \
+})
+
+#define __get_user_asm(val, insn, addr) \
+{ \
+ long __gu_tmp; \
+ \
+ __asm__ __volatile__( \
+ "1: " insn " %1, %3 \n" \
+ "2: \n" \
+ " .section .fixup,\"ax\" \n" \
+ "3: li %0, %4 \n" \
+ " j 2b \n" \
+ " .previous \n" \
+ " .section __ex_table,\"a\" \n" \
+ " "__UA_ADDR "\t1b, 3b \n" \
+ " .previous \n" \
+ : "=r" (__gu_err), "=r" (__gu_tmp) \
+ : "0" (0), "o" (__m(addr)), "i" (-EFAULT)); \
+ \
+ (val) = (__typeof__(*(addr))) __gu_tmp; \
+}
+
+/*
+ * Get a long long 64 using 32 bit registers.
+ */
+#define __get_user_asm_ll32(val, addr) \
+{ \
+ union { \
+ unsigned long long l; \
+ __typeof__(*(addr)) t; \
+ } __gu_tmp; \
+ \
+ __asm__ __volatile__( \
+ "1: lw %1, (%3) \n" \
+ "2: lw %D1, 4(%3) \n" \
+ "3: .section .fixup,\"ax\" \n" \
+ "4: li %0, %4 \n" \
+ " move %1, $0 \n" \
+ " move %D1, $0 \n" \
+ " j 3b \n" \
+ " .previous \n" \
+ " .section __ex_table,\"a\" \n" \
+ " " __UA_ADDR " 1b, 4b \n" \
+ " " __UA_ADDR " 2b, 4b \n" \
+ " .previous \n" \
+ : "=r" (__gu_err), "=&r" (__gu_tmp.l) \
+ : "0" (0), "r" (addr), "i" (-EFAULT)); \
+ \
+ (val) = __gu_tmp.t; \
+}
+
+/*
+ * Yuck. We need two variants, one for 64bit operation and one
+ * for 32 bit mode and old iron.
+ */
+#ifdef CONFIG_32BIT
+#define __PUT_USER_DW(ptr) __put_user_asm_ll32(ptr)
+#endif
+#ifdef CONFIG_64BIT
+#define __PUT_USER_DW(ptr) __put_user_asm("sd", ptr)
+#endif
+
+#define __put_user_nocheck(x, ptr, size) \
+({ \
+ __typeof__(*(ptr)) __pu_val; \
+ int __pu_err = 0; \
+ \
+ __pu_val = (x); \
+ switch (size) { \
+ case 1: __put_user_asm("sb", ptr); break; \
+ case 2: __put_user_asm("sh", ptr); break; \
+ case 4: __put_user_asm("sw", ptr); break; \
+ case 8: __PUT_USER_DW(ptr); break; \
+ default: __put_user_unknown(); break; \
+ } \
+ __pu_err; \
+})
+
+#define __put_user_check(x, ptr, size) \
+({ \
+ __typeof__(*(ptr)) __user *__pu_addr = (ptr); \
+ __typeof__(*(ptr)) __pu_val = (x); \
+ int __pu_err = -EFAULT; \
+ \
+ if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) { \
+ switch (size) { \
+ case 1: __put_user_asm("sb", __pu_addr); break; \
+ case 2: __put_user_asm("sh", __pu_addr); break; \
+ case 4: __put_user_asm("sw", __pu_addr); break; \
+ case 8: __PUT_USER_DW(__pu_addr); break; \
+ default: __put_user_unknown(); break; \
+ } \
+ } \
+ __pu_err; \
+})
+
+#define __put_user_asm(insn, ptr) \
+{ \
+ __asm__ __volatile__( \
+ "1: " insn " %z2, %3 # __put_user_asm\n" \
+ "2: \n" \
+ " .section .fixup,\"ax\" \n" \
+ "3: li %0, %4 \n" \
+ " j 2b \n" \
+ " .previous \n" \
+ " .section __ex_table,\"a\" \n" \
+ " " __UA_ADDR " 1b, 3b \n" \
+ " .previous \n" \
+ : "=r" (__pu_err) \
+ : "0" (0), "Jr" (__pu_val), "o" (__m(ptr)), \
+ "i" (-EFAULT)); \
+}
+
+#define __put_user_asm_ll32(ptr) \
+{ \
+ __asm__ __volatile__( \
+ "1: sw %2, (%3) # __put_user_asm_ll32 \n" \
+ "2: sw %D2, 4(%3) \n" \
+ "3: \n" \
+ " .section .fixup,\"ax\" \n" \
+ "4: li %0, %4 \n" \
+ " j 3b \n" \
+ " .previous \n" \
+ " .section __ex_table,\"a\" \n" \
+ " " __UA_ADDR " 1b, 4b \n" \
+ " " __UA_ADDR " 2b, 4b \n" \
+ " .previous" \
+ : "=r" (__pu_err) \
+ : "0" (0), "r" (__pu_val), "r" (ptr), \
+ "i" (-EFAULT)); \
+}
+
+extern void __put_user_unknown(void);
+
+/*
+ * put_user_unaligned: - Write a simple value into user space.
+ * @x: Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space. It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define put_user_unaligned(x,ptr) \
+ __put_user_unaligned_check((x),(ptr),sizeof(*(ptr)))
+
+/*
+ * get_user_unaligned: - Get a simple variable from user space.
+ * @x: Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space. It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#define get_user_unaligned(x,ptr) \
+ __get_user_unaligned_check((x),(ptr),sizeof(*(ptr)))
+
+/*
+ * __put_user_unaligned: - Write a simple value into user space, with less checking.
+ * @x: Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space. It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define __put_user_unaligned(x,ptr) \
+ __put_user_unaligned_nocheck((x),(ptr),sizeof(*(ptr)))
+
+/*
+ * __get_user_unaligned: - Get a simple variable from user space, with less checking.
+ * @x: Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space. It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#define __get_user_unaligned(x,ptr) \
+ __get_user__unalignednocheck((x),(ptr),sizeof(*(ptr)))
+
+/*
+ * Yuck. We need two variants, one for 64bit operation and one
+ * for 32 bit mode and old iron.
+ */
+#ifdef CONFIG_32BIT
+#define __GET_USER_UNALIGNED_DW(val, ptr) \
+ __get_user_unaligned_asm_ll32(val, ptr)
+#endif
+#ifdef CONFIG_64BIT
+#define __GET_USER_UNALIGNED_DW(val, ptr) \
+ __get_user_unaligned_asm(val, "uld", ptr)
+#endif
+
+extern void __get_user_unaligned_unknown(void);
+
+#define __get_user_unaligned_common(val, size, ptr) \
+do { \
+ switch (size) { \
+ case 1: __get_user_asm(val, "lb", ptr); break; \
+ case 2: __get_user_unaligned_asm(val, "ulh", ptr); break; \
+ case 4: __get_user_unaligned_asm(val, "ulw", ptr); break; \
+ case 8: __GET_USER_UNALIGNED_DW(val, ptr); break; \
+ default: __get_user_unaligned_unknown(); break; \
+ } \
+} while (0)
+
+#define __get_user_unaligned_nocheck(x,ptr,size) \
+({ \
+ int __gu_err; \
+ \
+ __get_user_unaligned_common((x), size, ptr); \
+ __gu_err; \
+})
+
+#define __get_user_unaligned_check(x,ptr,size) \
+({ \
+ int __gu_err = -EFAULT; \
+ const __typeof__(*(ptr)) __user * __gu_ptr = (ptr); \
+ \
+ if (likely(access_ok(VERIFY_READ, __gu_ptr, size))) \
+ __get_user_unaligned_common((x), size, __gu_ptr); \
+ \
+ __gu_err; \
+})
+
+#define __get_user_unaligned_asm(val, insn, addr) \
+{ \
+ long __gu_tmp; \
+ \
+ __asm__ __volatile__( \
+ "1: " insn " %1, %3 \n" \
+ "2: \n" \
+ " .section .fixup,\"ax\" \n" \
+ "3: li %0, %4 \n" \
+ " j 2b \n" \
+ " .previous \n" \
+ " .section __ex_table,\"a\" \n" \
+ " "__UA_ADDR "\t1b, 3b \n" \
+ " "__UA_ADDR "\t1b + 4, 3b \n" \
+ " .previous \n" \
+ : "=r" (__gu_err), "=r" (__gu_tmp) \
+ : "0" (0), "o" (__m(addr)), "i" (-EFAULT)); \
+ \
+ (val) = (__typeof__(*(addr))) __gu_tmp; \
+}
+
+/*
+ * Get a long long 64 using 32 bit registers.
+ */
+#define __get_user_unaligned_asm_ll32(val, addr) \
+{ \
+ unsigned long long __gu_tmp; \
+ \
+ __asm__ __volatile__( \
+ "1: ulw %1, (%3) \n" \
+ "2: ulw %D1, 4(%3) \n" \
+ " move %0, $0 \n" \
+ "3: .section .fixup,\"ax\" \n" \
+ "4: li %0, %4 \n" \
+ " move %1, $0 \n" \
+ " move %D1, $0 \n" \
+ " j 3b \n" \
+ " .previous \n" \
+ " .section __ex_table,\"a\" \n" \
+ " " __UA_ADDR " 1b, 4b \n" \
+ " " __UA_ADDR " 1b + 4, 4b \n" \
+ " " __UA_ADDR " 2b, 4b \n" \
+ " " __UA_ADDR " 2b + 4, 4b \n" \
+ " .previous \n" \
+ : "=r" (__gu_err), "=&r" (__gu_tmp) \
+ : "0" (0), "r" (addr), "i" (-EFAULT)); \
+ (val) = (__typeof__(*(addr))) __gu_tmp; \
+}
+
+/*
+ * Yuck. We need two variants, one for 64bit operation and one
+ * for 32 bit mode and old iron.
+ */
+#ifdef CONFIG_32BIT
+#define __PUT_USER_UNALIGNED_DW(ptr) __put_user_unaligned_asm_ll32(ptr)
+#endif
+#ifdef CONFIG_64BIT
+#define __PUT_USER_UNALIGNED_DW(ptr) __put_user_unaligned_asm("usd", ptr)
+#endif
+
+#define __put_user_unaligned_nocheck(x,ptr,size) \
+({ \
+ __typeof__(*(ptr)) __pu_val; \
+ int __pu_err = 0; \
+ \
+ __pu_val = (x); \
+ switch (size) { \
+ case 1: __put_user_asm("sb", ptr); break; \
+ case 2: __put_user_unaligned_asm("ush", ptr); break; \
+ case 4: __put_user_unaligned_asm("usw", ptr); break; \
+ case 8: __PUT_USER_UNALIGNED_DW(ptr); break; \
+ default: __put_user_unaligned_unknown(); break; \
+ } \
+ __pu_err; \
+})
+
+#define __put_user_unaligned_check(x,ptr,size) \
+({ \
+ __typeof__(*(ptr)) __user *__pu_addr = (ptr); \
+ __typeof__(*(ptr)) __pu_val = (x); \
+ int __pu_err = -EFAULT; \
+ \
+ if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) { \
+ switch (size) { \
+ case 1: __put_user_asm("sb", __pu_addr); break; \
+ case 2: __put_user_unaligned_asm("ush", __pu_addr); break; \
+ case 4: __put_user_unaligned_asm("usw", __pu_addr); break; \
+ case 8: __PUT_USER_UNALGINED_DW(__pu_addr); break; \
+ default: __put_user_unaligned_unknown(); break; \
+ } \
+ } \
+ __pu_err; \
+})
+
+#define __put_user_unaligned_asm(insn, ptr) \
+{ \
+ __asm__ __volatile__( \
+ "1: " insn " %z2, %3 # __put_user_unaligned_asm\n" \
+ "2: \n" \
+ " .section .fixup,\"ax\" \n" \
+ "3: li %0, %4 \n" \
+ " j 2b \n" \
+ " .previous \n" \
+ " .section __ex_table,\"a\" \n" \
+ " " __UA_ADDR " 1b, 3b \n" \
+ " .previous \n" \
+ : "=r" (__pu_err) \
+ : "0" (0), "Jr" (__pu_val), "o" (__m(ptr)), \
+ "i" (-EFAULT)); \
+}
+
+#define __put_user_unaligned_asm_ll32(ptr) \
+{ \
+ __asm__ __volatile__( \
+ "1: sw %2, (%3) # __put_user_unaligned_asm_ll32 \n" \
+ "2: sw %D2, 4(%3) \n" \
+ "3: \n" \
+ " .section .fixup,\"ax\" \n" \
+ "4: li %0, %4 \n" \
+ " j 3b \n" \
+ " .previous \n" \
+ " .section __ex_table,\"a\" \n" \
+ " " __UA_ADDR " 1b, 4b \n" \
+ " " __UA_ADDR " 1b + 4, 4b \n" \
+ " " __UA_ADDR " 2b, 4b \n" \
+ " " __UA_ADDR " 2b + 4, 4b \n" \
+ " .previous" \
+ : "=r" (__pu_err) \
+ : "0" (0), "r" (__pu_val), "r" (ptr), \
+ "i" (-EFAULT)); \
+}
+
+extern void __put_user_unaligned_unknown(void);
+
+/*
+ * We're generating jump to subroutines which will be outside the range of
+ * jump instructions
+ */
+#ifdef MODULE
+#define __MODULE_JAL(destination) \
+ ".set\tnoat\n\t" \
+ __UA_LA "\t$1, " #destination "\n\t" \
+ "jalr\t$1\n\t" \
+ ".set\tat\n\t"
+#else
+#define __MODULE_JAL(destination) \
+ "jal\t" #destination "\n\t"
+#endif
+
+#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
+#define DADDI_SCRATCH "$0"
+#else
+#define DADDI_SCRATCH "$3"
+#endif
+
+extern size_t __copy_user(void *__to, const void *__from, size_t __n);
+
+#define __invoke_copy_to_user(to, from, n) \
+({ \
+ register void __user *__cu_to_r __asm__("$4"); \
+ register const void *__cu_from_r __asm__("$5"); \
+ register long __cu_len_r __asm__("$6"); \
+ \
+ __cu_to_r = (to); \
+ __cu_from_r = (from); \
+ __cu_len_r = (n); \
+ __asm__ __volatile__( \
+ __MODULE_JAL(__copy_user) \
+ : "+r" (__cu_to_r), "+r" (__cu_from_r), "+r" (__cu_len_r) \
+ : \
+ : "$8", "$9", "$10", "$11", "$12", "$15", "$24", "$31", \
+ DADDI_SCRATCH, "memory"); \
+ __cu_len_r; \
+})
+
+/*
+ * __copy_to_user: - Copy a block of data into user space, with less checking.
+ * @to: Destination address, in user space.
+ * @from: Source address, in kernel space.
+ * @n: Number of bytes to copy.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * Copy data from kernel space to user space. Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ */
+#define __copy_to_user(to, from, n) \
+({ \
+ void __user *__cu_to; \
+ const void *__cu_from; \
+ long __cu_len; \
+ \
+ might_sleep(); \
+ __cu_to = (to); \
+ __cu_from = (from); \
+ __cu_len = (n); \
+ __cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len); \
+ __cu_len; \
+})
+
+extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
+
+#define __copy_to_user_inatomic(to, from, n) \
+({ \
+ void __user *__cu_to; \
+ const void *__cu_from; \
+ long __cu_len; \
+ \
+ __cu_to = (to); \
+ __cu_from = (from); \
+ __cu_len = (n); \
+ __cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len); \
+ __cu_len; \
+})
+
+#define __copy_from_user_inatomic(to, from, n) \
+({ \
+ void *__cu_to; \
+ const void __user *__cu_from; \
+ long __cu_len; \
+ \
+ __cu_to = (to); \
+ __cu_from = (from); \
+ __cu_len = (n); \
+ __cu_len = __invoke_copy_from_user_inatomic(__cu_to, __cu_from, \
+ __cu_len); \
+ __cu_len; \
+})
+
+/*
+ * copy_to_user: - Copy a block of data into user space.
+ * @to: Destination address, in user space.
+ * @from: Source address, in kernel space.
+ * @n: Number of bytes to copy.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * Copy data from kernel space to user space.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ */
+#define copy_to_user(to, from, n) \
+({ \
+ void __user *__cu_to; \
+ const void *__cu_from; \
+ long __cu_len; \
+ \
+ might_sleep(); \
+ __cu_to = (to); \
+ __cu_from = (from); \
+ __cu_len = (n); \
+ if (access_ok(VERIFY_WRITE, __cu_to, __cu_len)) \
+ __cu_len = __invoke_copy_to_user(__cu_to, __cu_from, \
+ __cu_len); \
+ __cu_len; \
+})
+
+#define __invoke_copy_from_user(to, from, n) \
+({ \
+ register void *__cu_to_r __asm__("$4"); \
+ register const void __user *__cu_from_r __asm__("$5"); \
+ register long __cu_len_r __asm__("$6"); \
+ \
+ __cu_to_r = (to); \
+ __cu_from_r = (from); \
+ __cu_len_r = (n); \
+ __asm__ __volatile__( \
+ ".set\tnoreorder\n\t" \
+ __MODULE_JAL(__copy_user) \
+ ".set\tnoat\n\t" \
+ __UA_ADDU "\t$1, %1, %2\n\t" \
+ ".set\tat\n\t" \
+ ".set\treorder" \
+ : "+r" (__cu_to_r), "+r" (__cu_from_r), "+r" (__cu_len_r) \
+ : \
+ : "$8", "$9", "$10", "$11", "$12", "$15", "$24", "$31", \
+ DADDI_SCRATCH, "memory"); \
+ __cu_len_r; \
+})
+
+#define __invoke_copy_from_user_inatomic(to, from, n) \
+({ \
+ register void *__cu_to_r __asm__("$4"); \
+ register const void __user *__cu_from_r __asm__("$5"); \
+ register long __cu_len_r __asm__("$6"); \
+ \
+ __cu_to_r = (to); \
+ __cu_from_r = (from); \
+ __cu_len_r = (n); \
+ __asm__ __volatile__( \
+ ".set\tnoreorder\n\t" \
+ __MODULE_JAL(__copy_user_inatomic) \
+ ".set\tnoat\n\t" \
+ __UA_ADDU "\t$1, %1, %2\n\t" \
+ ".set\tat\n\t" \
+ ".set\treorder" \
+ : "+r" (__cu_to_r), "+r" (__cu_from_r), "+r" (__cu_len_r) \
+ : \
+ : "$8", "$9", "$10", "$11", "$12", "$15", "$24", "$31", \
+ DADDI_SCRATCH, "memory"); \
+ __cu_len_r; \
+})
+
+/*
+ * __copy_from_user: - Copy a block of data from user space, with less checking.
+ * @to: Destination address, in kernel space.
+ * @from: Source address, in user space.
+ * @n: Number of bytes to copy.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * Copy data from user space to kernel space. Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ *
+ * If some data could not be copied, this function will pad the copied
+ * data to the requested size using zero bytes.
+ */
+#define __copy_from_user(to, from, n) \
+({ \
+ void *__cu_to; \
+ const void __user *__cu_from; \
+ long __cu_len; \
+ \
+ might_sleep(); \
+ __cu_to = (to); \
+ __cu_from = (from); \
+ __cu_len = (n); \
+ __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \
+ __cu_len); \
+ __cu_len; \
+})
+
+/*
+ * copy_from_user: - Copy a block of data from user space.
+ * @to: Destination address, in kernel space.
+ * @from: Source address, in user space.
+ * @n: Number of bytes to copy.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * Copy data from user space to kernel space.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ *
+ * If some data could not be copied, this function will pad the copied
+ * data to the requested size using zero bytes.
+ */
+#define copy_from_user(to, from, n) \
+({ \
+ void *__cu_to; \
+ const void __user *__cu_from; \
+ long __cu_len; \
+ \
+ might_sleep(); \
+ __cu_to = (to); \
+ __cu_from = (from); \
+ __cu_len = (n); \
+ if (access_ok(VERIFY_READ, __cu_from, __cu_len)) \
+ __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \
+ __cu_len); \
+ __cu_len; \
+})
+
+#define __copy_in_user(to, from, n) __copy_from_user(to, from, n)
+
+#define copy_in_user(to, from, n) \
+({ \
+ void __user *__cu_to; \
+ const void __user *__cu_from; \
+ long __cu_len; \
+ \
+ might_sleep(); \
+ __cu_to = (to); \
+ __cu_from = (from); \
+ __cu_len = (n); \
+ if (likely(access_ok(VERIFY_READ, __cu_from, __cu_len) && \
+ access_ok(VERIFY_WRITE, __cu_to, __cu_len))) \
+ __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \
+ __cu_len); \
+ __cu_len; \
+})
+
+/*
+ * __clear_user: - Zero a block of memory in user space, with less checking.
+ * @to: Destination address, in user space.
+ * @n: Number of bytes to zero.
+ *
+ * Zero a block of memory in user space. Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be cleared.
+ * On success, this will be zero.
+ */
+static inline __kernel_size_t
+__clear_user(void __user *addr, __kernel_size_t size)
+{
+ __kernel_size_t res;
+
+ might_sleep();
+ __asm__ __volatile__(
+ "move\t$4, %1\n\t"
+ "move\t$5, $0\n\t"
+ "move\t$6, %2\n\t"
+ __MODULE_JAL(__bzero)
+ "move\t%0, $6"
+ : "=r" (res)
+ : "r" (addr), "r" (size)
+ : "$4", "$5", "$6", __UA_t0, __UA_t1, "$31");
+
+ return res;
+}
+
+#define clear_user(addr,n) \
+({ \
+ void __user * __cl_addr = (addr); \
+ unsigned long __cl_size = (n); \
+ if (__cl_size && access_ok(VERIFY_WRITE, \
+ ((unsigned long)(__cl_addr)), __cl_size)) \
+ __cl_size = __clear_user(__cl_addr, __cl_size); \
+ __cl_size; \
+})
+
+/*
+ * __strncpy_from_user: - Copy a NUL terminated string from userspace, with less checking.
+ * @dst: Destination address, in kernel space. This buffer must be at
+ * least @count bytes long.
+ * @src: Source address, in user space.
+ * @count: Maximum number of bytes to copy, including the trailing NUL.
+ *
+ * Copies a NUL-terminated string from userspace to kernel space.
+ * Caller must check the specified block with access_ok() before calling
+ * this function.
+ *
+ * On success, returns the length of the string (not including the trailing
+ * NUL).
+ *
+ * If access to userspace fails, returns -EFAULT (some data may have been
+ * copied).
+ *
+ * If @count is smaller than the length of the string, copies @count bytes
+ * and returns @count.
+ */
+static inline long
+__strncpy_from_user(char *__to, const char __user *__from, long __len)
+{
+ long res;
+
+ might_sleep();
+ __asm__ __volatile__(
+ "move\t$4, %1\n\t"
+ "move\t$5, %2\n\t"
+ "move\t$6, %3\n\t"
+ __MODULE_JAL(__strncpy_from_user_nocheck_asm)
+ "move\t%0, $2"
+ : "=r" (res)
+ : "r" (__to), "r" (__from), "r" (__len)
+ : "$2", "$3", "$4", "$5", "$6", __UA_t0, "$31", "memory");
+
+ return res;
+}
+
+/*
+ * strncpy_from_user: - Copy a NUL terminated string from userspace.
+ * @dst: Destination address, in kernel space. This buffer must be at
+ * least @count bytes long.
+ * @src: Source address, in user space.
+ * @count: Maximum number of bytes to copy, including the trailing NUL.
+ *
+ * Copies a NUL-terminated string from userspace to kernel space.
+ *
+ * On success, returns the length of the string (not including the trailing
+ * NUL).
+ *
+ * If access to userspace fails, returns -EFAULT (some data may have been
+ * copied).
+ *
+ * If @count is smaller than the length of the string, copies @count bytes
+ * and returns @count.
+ */
+static inline long
+strncpy_from_user(char *__to, const char __user *__from, long __len)
+{
+ long res;
+
+ might_sleep();
+ __asm__ __volatile__(
+ "move\t$4, %1\n\t"
+ "move\t$5, %2\n\t"
+ "move\t$6, %3\n\t"
+ __MODULE_JAL(__strncpy_from_user_asm)
+ "move\t%0, $2"
+ : "=r" (res)
+ : "r" (__to), "r" (__from), "r" (__len)
+ : "$2", "$3", "$4", "$5", "$6", __UA_t0, "$31", "memory");
+
+ return res;
+}
+
+/* Returns: 0 if bad, string length+1 (memory size) of string if ok */
+static inline long __strlen_user(const char __user *s)
+{
+ long res;
+
+ might_sleep();
+ __asm__ __volatile__(
+ "move\t$4, %1\n\t"
+ __MODULE_JAL(__strlen_user_nocheck_asm)
+ "move\t%0, $2"
+ : "=r" (res)
+ : "r" (s)
+ : "$2", "$4", __UA_t0, "$31");
+
+ return res;
+}
+
+/*
+ * strlen_user: - Get the size of a string in user space.
+ * @str: The string to measure.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ *
+ * If there is a limit on the length of a valid string, you may wish to
+ * consider using strnlen_user() instead.
+ */
+static inline long strlen_user(const char __user *s)
+{
+ long res;
+
+ might_sleep();
+ __asm__ __volatile__(
+ "move\t$4, %1\n\t"
+ __MODULE_JAL(__strlen_user_asm)
+ "move\t%0, $2"
+ : "=r" (res)
+ : "r" (s)
+ : "$2", "$4", __UA_t0, "$31");
+
+ return res;
+}
+
+/* Returns: 0 if bad, string length+1 (memory size) of string if ok */
+static inline long __strnlen_user(const char __user *s, long n)
+{
+ long res;
+
+ might_sleep();
+ __asm__ __volatile__(
+ "move\t$4, %1\n\t"
+ "move\t$5, %2\n\t"
+ __MODULE_JAL(__strnlen_user_nocheck_asm)
+ "move\t%0, $2"
+ : "=r" (res)
+ : "r" (s), "r" (n)
+ : "$2", "$4", "$5", __UA_t0, "$31");
+
+ return res;
+}
+
+/*
+ * strlen_user: - Get the size of a string in user space.
+ * @str: The string to measure.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ *
+ * If there is a limit on the length of a valid string, you may wish to
+ * consider using strnlen_user() instead.
+ */
+static inline long strnlen_user(const char __user *s, long n)
+{
+ long res;
+
+ might_sleep();
+ __asm__ __volatile__(
+ "move\t$4, %1\n\t"
+ "move\t$5, %2\n\t"
+ __MODULE_JAL(__strnlen_user_asm)
+ "move\t%0, $2"
+ : "=r" (res)
+ : "r" (s), "r" (n)
+ : "$2", "$4", "$5", __UA_t0, "$31");
+
+ return res;
+}
+
+struct exception_table_entry
+{
+ unsigned long insn;
+ unsigned long nextinsn;
+};
+
+extern int fixup_exception(struct pt_regs *regs);
+
+#endif /* _ASM_UACCESS_H */
diff --git a/arch/mips/include/asm/ucontext.h b/arch/mips/include/asm/ucontext.h
new file mode 100644
index 00000000000..8a4b20e88b8
--- /dev/null
+++ b/arch/mips/include/asm/ucontext.h
@@ -0,0 +1,21 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Low level exception handling
+ *
+ * Copyright (C) 1998, 1999 by Ralf Baechle
+ */
+#ifndef _ASM_UCONTEXT_H
+#define _ASM_UCONTEXT_H
+
+struct ucontext {
+ unsigned long uc_flags;
+ struct ucontext *uc_link;
+ stack_t uc_stack;
+ struct sigcontext uc_mcontext;
+ sigset_t uc_sigmask; /* mask last for extensibility */
+};
+
+#endif /* _ASM_UCONTEXT_H */
diff --git a/arch/mips/include/asm/unaligned.h b/arch/mips/include/asm/unaligned.h
new file mode 100644
index 00000000000..79240494857
--- /dev/null
+++ b/arch/mips/include/asm/unaligned.h
@@ -0,0 +1,28 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef _ASM_MIPS_UNALIGNED_H
+#define _ASM_MIPS_UNALIGNED_H
+
+#include <linux/compiler.h>
+#if defined(__MIPSEB__)
+# include <linux/unaligned/be_struct.h>
+# include <linux/unaligned/le_byteshift.h>
+# include <linux/unaligned/generic.h>
+# define get_unaligned __get_unaligned_be
+# define put_unaligned __put_unaligned_be
+#elif defined(__MIPSEL__)
+# include <linux/unaligned/le_struct.h>
+# include <linux/unaligned/be_byteshift.h>
+# include <linux/unaligned/generic.h>
+# define get_unaligned __get_unaligned_le
+# define put_unaligned __put_unaligned_le
+#else
+# error "MIPS, but neither __MIPSEB__, nor __MIPSEL__???"
+#endif
+
+#endif /* _ASM_MIPS_UNALIGNED_H */
diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h
new file mode 100644
index 00000000000..a73e1531e15
--- /dev/null
+++ b/arch/mips/include/asm/unistd.h
@@ -0,0 +1,1037 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995, 96, 97, 98, 99, 2000 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ *
+ * Changed system calls macros _syscall5 - _syscall7 to push args 5 to 7 onto
+ * the stack. Robin Farine for ACN S.A, Copyright (C) 1996 by ACN S.A
+ */
+#ifndef _ASM_UNISTD_H
+#define _ASM_UNISTD_H
+
+#include <asm/sgidefs.h>
+
+#if _MIPS_SIM == _MIPS_SIM_ABI32
+
+/*
+ * Linux o32 style syscalls are in the range from 4000 to 4999.
+ */
+#define __NR_Linux 4000
+#define __NR_syscall (__NR_Linux + 0)
+#define __NR_exit (__NR_Linux + 1)
+#define __NR_fork (__NR_Linux + 2)
+#define __NR_read (__NR_Linux + 3)
+#define __NR_write (__NR_Linux + 4)
+#define __NR_open (__NR_Linux + 5)
+#define __NR_close (__NR_Linux + 6)
+#define __NR_waitpid (__NR_Linux + 7)
+#define __NR_creat (__NR_Linux + 8)
+#define __NR_link (__NR_Linux + 9)
+#define __NR_unlink (__NR_Linux + 10)
+#define __NR_execve (__NR_Linux + 11)
+#define __NR_chdir (__NR_Linux + 12)
+#define __NR_time (__NR_Linux + 13)
+#define __NR_mknod (__NR_Linux + 14)
+#define __NR_chmod (__NR_Linux + 15)
+#define __NR_lchown (__NR_Linux + 16)
+#define __NR_break (__NR_Linux + 17)
+#define __NR_unused18 (__NR_Linux + 18)
+#define __NR_lseek (__NR_Linux + 19)
+#define __NR_getpid (__NR_Linux + 20)
+#define __NR_mount (__NR_Linux + 21)
+#define __NR_umount (__NR_Linux + 22)
+#define __NR_setuid (__NR_Linux + 23)
+#define __NR_getuid (__NR_Linux + 24)
+#define __NR_stime (__NR_Linux + 25)
+#define __NR_ptrace (__NR_Linux + 26)
+#define __NR_alarm (__NR_Linux + 27)
+#define __NR_unused28 (__NR_Linux + 28)
+#define __NR_pause (__NR_Linux + 29)
+#define __NR_utime (__NR_Linux + 30)
+#define __NR_stty (__NR_Linux + 31)
+#define __NR_gtty (__NR_Linux + 32)
+#define __NR_access (__NR_Linux + 33)
+#define __NR_nice (__NR_Linux + 34)
+#define __NR_ftime (__NR_Linux + 35)
+#define __NR_sync (__NR_Linux + 36)
+#define __NR_kill (__NR_Linux + 37)
+#define __NR_rename (__NR_Linux + 38)
+#define __NR_mkdir (__NR_Linux + 39)
+#define __NR_rmdir (__NR_Linux + 40)
+#define __NR_dup (__NR_Linux + 41)
+#define __NR_pipe (__NR_Linux + 42)
+#define __NR_times (__NR_Linux + 43)
+#define __NR_prof (__NR_Linux + 44)
+#define __NR_brk (__NR_Linux + 45)
+#define __NR_setgid (__NR_Linux + 46)
+#define __NR_getgid (__NR_Linux + 47)
+#define __NR_signal (__NR_Linux + 48)
+#define __NR_geteuid (__NR_Linux + 49)
+#define __NR_getegid (__NR_Linux + 50)
+#define __NR_acct (__NR_Linux + 51)
+#define __NR_umount2 (__NR_Linux + 52)
+#define __NR_lock (__NR_Linux + 53)
+#define __NR_ioctl (__NR_Linux + 54)
+#define __NR_fcntl (__NR_Linux + 55)
+#define __NR_mpx (__NR_Linux + 56)
+#define __NR_setpgid (__NR_Linux + 57)
+#define __NR_ulimit (__NR_Linux + 58)
+#define __NR_unused59 (__NR_Linux + 59)
+#define __NR_umask (__NR_Linux + 60)
+#define __NR_chroot (__NR_Linux + 61)
+#define __NR_ustat (__NR_Linux + 62)
+#define __NR_dup2 (__NR_Linux + 63)
+#define __NR_getppid (__NR_Linux + 64)
+#define __NR_getpgrp (__NR_Linux + 65)
+#define __NR_setsid (__NR_Linux + 66)
+#define __NR_sigaction (__NR_Linux + 67)
+#define __NR_sgetmask (__NR_Linux + 68)
+#define __NR_ssetmask (__NR_Linux + 69)
+#define __NR_setreuid (__NR_Linux + 70)
+#define __NR_setregid (__NR_Linux + 71)
+#define __NR_sigsuspend (__NR_Linux + 72)
+#define __NR_sigpending (__NR_Linux + 73)
+#define __NR_sethostname (__NR_Linux + 74)
+#define __NR_setrlimit (__NR_Linux + 75)
+#define __NR_getrlimit (__NR_Linux + 76)
+#define __NR_getrusage (__NR_Linux + 77)
+#define __NR_gettimeofday (__NR_Linux + 78)
+#define __NR_settimeofday (__NR_Linux + 79)
+#define __NR_getgroups (__NR_Linux + 80)
+#define __NR_setgroups (__NR_Linux + 81)
+#define __NR_reserved82 (__NR_Linux + 82)
+#define __NR_symlink (__NR_Linux + 83)
+#define __NR_unused84 (__NR_Linux + 84)
+#define __NR_readlink (__NR_Linux + 85)
+#define __NR_uselib (__NR_Linux + 86)
+#define __NR_swapon (__NR_Linux + 87)
+#define __NR_reboot (__NR_Linux + 88)
+#define __NR_readdir (__NR_Linux + 89)
+#define __NR_mmap (__NR_Linux + 90)
+#define __NR_munmap (__NR_Linux + 91)
+#define __NR_truncate (__NR_Linux + 92)
+#define __NR_ftruncate (__NR_Linux + 93)
+#define __NR_fchmod (__NR_Linux + 94)
+#define __NR_fchown (__NR_Linux + 95)
+#define __NR_getpriority (__NR_Linux + 96)
+#define __NR_setpriority (__NR_Linux + 97)
+#define __NR_profil (__NR_Linux + 98)
+#define __NR_statfs (__NR_Linux + 99)
+#define __NR_fstatfs (__NR_Linux + 100)
+#define __NR_ioperm (__NR_Linux + 101)
+#define __NR_socketcall (__NR_Linux + 102)
+#define __NR_syslog (__NR_Linux + 103)
+#define __NR_setitimer (__NR_Linux + 104)
+#define __NR_getitimer (__NR_Linux + 105)
+#define __NR_stat (__NR_Linux + 106)
+#define __NR_lstat (__NR_Linux + 107)
+#define __NR_fstat (__NR_Linux + 108)
+#define __NR_unused109 (__NR_Linux + 109)
+#define __NR_iopl (__NR_Linux + 110)
+#define __NR_vhangup (__NR_Linux + 111)
+#define __NR_idle (__NR_Linux + 112)
+#define __NR_vm86 (__NR_Linux + 113)
+#define __NR_wait4 (__NR_Linux + 114)
+#define __NR_swapoff (__NR_Linux + 115)
+#define __NR_sysinfo (__NR_Linux + 116)
+#define __NR_ipc (__NR_Linux + 117)
+#define __NR_fsync (__NR_Linux + 118)
+#define __NR_sigreturn (__NR_Linux + 119)
+#define __NR_clone (__NR_Linux + 120)
+#define __NR_setdomainname (__NR_Linux + 121)
+#define __NR_uname (__NR_Linux + 122)
+#define __NR_modify_ldt (__NR_Linux + 123)
+#define __NR_adjtimex (__NR_Linux + 124)
+#define __NR_mprotect (__NR_Linux + 125)
+#define __NR_sigprocmask (__NR_Linux + 126)
+#define __NR_create_module (__NR_Linux + 127)
+#define __NR_init_module (__NR_Linux + 128)
+#define __NR_delete_module (__NR_Linux + 129)
+#define __NR_get_kernel_syms (__NR_Linux + 130)
+#define __NR_quotactl (__NR_Linux + 131)
+#define __NR_getpgid (__NR_Linux + 132)
+#define __NR_fchdir (__NR_Linux + 133)
+#define __NR_bdflush (__NR_Linux + 134)
+#define __NR_sysfs (__NR_Linux + 135)
+#define __NR_personality (__NR_Linux + 136)
+#define __NR_afs_syscall (__NR_Linux + 137) /* Syscall for Andrew File System */
+#define __NR_setfsuid (__NR_Linux + 138)
+#define __NR_setfsgid (__NR_Linux + 139)
+#define __NR__llseek (__NR_Linux + 140)
+#define __NR_getdents (__NR_Linux + 141)
+#define __NR__newselect (__NR_Linux + 142)
+#define __NR_flock (__NR_Linux + 143)
+#define __NR_msync (__NR_Linux + 144)
+#define __NR_readv (__NR_Linux + 145)
+#define __NR_writev (__NR_Linux + 146)
+#define __NR_cacheflush (__NR_Linux + 147)
+#define __NR_cachectl (__NR_Linux + 148)
+#define __NR_sysmips (__NR_Linux + 149)
+#define __NR_unused150 (__NR_Linux + 150)
+#define __NR_getsid (__NR_Linux + 151)
+#define __NR_fdatasync (__NR_Linux + 152)
+#define __NR__sysctl (__NR_Linux + 153)
+#define __NR_mlock (__NR_Linux + 154)
+#define __NR_munlock (__NR_Linux + 155)
+#define __NR_mlockall (__NR_Linux + 156)
+#define __NR_munlockall (__NR_Linux + 157)
+#define __NR_sched_setparam (__NR_Linux + 158)
+#define __NR_sched_getparam (__NR_Linux + 159)
+#define __NR_sched_setscheduler (__NR_Linux + 160)
+#define __NR_sched_getscheduler (__NR_Linux + 161)
+#define __NR_sched_yield (__NR_Linux + 162)
+#define __NR_sched_get_priority_max (__NR_Linux + 163)
+#define __NR_sched_get_priority_min (__NR_Linux + 164)
+#define __NR_sched_rr_get_interval (__NR_Linux + 165)
+#define __NR_nanosleep (__NR_Linux + 166)
+#define __NR_mremap (__NR_Linux + 167)
+#define __NR_accept (__NR_Linux + 168)
+#define __NR_bind (__NR_Linux + 169)
+#define __NR_connect (__NR_Linux + 170)
+#define __NR_getpeername (__NR_Linux + 171)
+#define __NR_getsockname (__NR_Linux + 172)
+#define __NR_getsockopt (__NR_Linux + 173)
+#define __NR_listen (__NR_Linux + 174)
+#define __NR_recv (__NR_Linux + 175)
+#define __NR_recvfrom (__NR_Linux + 176)
+#define __NR_recvmsg (__NR_Linux + 177)
+#define __NR_send (__NR_Linux + 178)
+#define __NR_sendmsg (__NR_Linux + 179)
+#define __NR_sendto (__NR_Linux + 180)
+#define __NR_setsockopt (__NR_Linux + 181)
+#define __NR_shutdown (__NR_Linux + 182)
+#define __NR_socket (__NR_Linux + 183)
+#define __NR_socketpair (__NR_Linux + 184)
+#define __NR_setresuid (__NR_Linux + 185)
+#define __NR_getresuid (__NR_Linux + 186)
+#define __NR_query_module (__NR_Linux + 187)
+#define __NR_poll (__NR_Linux + 188)
+#define __NR_nfsservctl (__NR_Linux + 189)
+#define __NR_setresgid (__NR_Linux + 190)
+#define __NR_getresgid (__NR_Linux + 191)
+#define __NR_prctl (__NR_Linux + 192)
+#define __NR_rt_sigreturn (__NR_Linux + 193)
+#define __NR_rt_sigaction (__NR_Linux + 194)
+#define __NR_rt_sigprocmask (__NR_Linux + 195)
+#define __NR_rt_sigpending (__NR_Linux + 196)
+#define __NR_rt_sigtimedwait (__NR_Linux + 197)
+#define __NR_rt_sigqueueinfo (__NR_Linux + 198)
+#define __NR_rt_sigsuspend (__NR_Linux + 199)
+#define __NR_pread64 (__NR_Linux + 200)
+#define __NR_pwrite64 (__NR_Linux + 201)
+#define __NR_chown (__NR_Linux + 202)
+#define __NR_getcwd (__NR_Linux + 203)
+#define __NR_capget (__NR_Linux + 204)
+#define __NR_capset (__NR_Linux + 205)
+#define __NR_sigaltstack (__NR_Linux + 206)
+#define __NR_sendfile (__NR_Linux + 207)
+#define __NR_getpmsg (__NR_Linux + 208)
+#define __NR_putpmsg (__NR_Linux + 209)
+#define __NR_mmap2 (__NR_Linux + 210)
+#define __NR_truncate64 (__NR_Linux + 211)
+#define __NR_ftruncate64 (__NR_Linux + 212)
+#define __NR_stat64 (__NR_Linux + 213)
+#define __NR_lstat64 (__NR_Linux + 214)
+#define __NR_fstat64 (__NR_Linux + 215)
+#define __NR_pivot_root (__NR_Linux + 216)
+#define __NR_mincore (__NR_Linux + 217)
+#define __NR_madvise (__NR_Linux + 218)
+#define __NR_getdents64 (__NR_Linux + 219)
+#define __NR_fcntl64 (__NR_Linux + 220)
+#define __NR_reserved221 (__NR_Linux + 221)
+#define __NR_gettid (__NR_Linux + 222)
+#define __NR_readahead (__NR_Linux + 223)
+#define __NR_setxattr (__NR_Linux + 224)
+#define __NR_lsetxattr (__NR_Linux + 225)
+#define __NR_fsetxattr (__NR_Linux + 226)
+#define __NR_getxattr (__NR_Linux + 227)
+#define __NR_lgetxattr (__NR_Linux + 228)
+#define __NR_fgetxattr (__NR_Linux + 229)
+#define __NR_listxattr (__NR_Linux + 230)
+#define __NR_llistxattr (__NR_Linux + 231)
+#define __NR_flistxattr (__NR_Linux + 232)
+#define __NR_removexattr (__NR_Linux + 233)
+#define __NR_lremovexattr (__NR_Linux + 234)
+#define __NR_fremovexattr (__NR_Linux + 235)
+#define __NR_tkill (__NR_Linux + 236)
+#define __NR_sendfile64 (__NR_Linux + 237)
+#define __NR_futex (__NR_Linux + 238)
+#define __NR_sched_setaffinity (__NR_Linux + 239)
+#define __NR_sched_getaffinity (__NR_Linux + 240)
+#define __NR_io_setup (__NR_Linux + 241)
+#define __NR_io_destroy (__NR_Linux + 242)
+#define __NR_io_getevents (__NR_Linux + 243)
+#define __NR_io_submit (__NR_Linux + 244)
+#define __NR_io_cancel (__NR_Linux + 245)
+#define __NR_exit_group (__NR_Linux + 246)
+#define __NR_lookup_dcookie (__NR_Linux + 247)
+#define __NR_epoll_create (__NR_Linux + 248)
+#define __NR_epoll_ctl (__NR_Linux + 249)
+#define __NR_epoll_wait (__NR_Linux + 250)
+#define __NR_remap_file_pages (__NR_Linux + 251)
+#define __NR_set_tid_address (__NR_Linux + 252)
+#define __NR_restart_syscall (__NR_Linux + 253)
+#define __NR_fadvise64 (__NR_Linux + 254)
+#define __NR_statfs64 (__NR_Linux + 255)
+#define __NR_fstatfs64 (__NR_Linux + 256)
+#define __NR_timer_create (__NR_Linux + 257)
+#define __NR_timer_settime (__NR_Linux + 258)
+#define __NR_timer_gettime (__NR_Linux + 259)
+#define __NR_timer_getoverrun (__NR_Linux + 260)
+#define __NR_timer_delete (__NR_Linux + 261)
+#define __NR_clock_settime (__NR_Linux + 262)
+#define __NR_clock_gettime (__NR_Linux + 263)
+#define __NR_clock_getres (__NR_Linux + 264)
+#define __NR_clock_nanosleep (__NR_Linux + 265)
+#define __NR_tgkill (__NR_Linux + 266)
+#define __NR_utimes (__NR_Linux + 267)
+#define __NR_mbind (__NR_Linux + 268)
+#define __NR_get_mempolicy (__NR_Linux + 269)
+#define __NR_set_mempolicy (__NR_Linux + 270)
+#define __NR_mq_open (__NR_Linux + 271)
+#define __NR_mq_unlink (__NR_Linux + 272)
+#define __NR_mq_timedsend (__NR_Linux + 273)
+#define __NR_mq_timedreceive (__NR_Linux + 274)
+#define __NR_mq_notify (__NR_Linux + 275)
+#define __NR_mq_getsetattr (__NR_Linux + 276)
+#define __NR_vserver (__NR_Linux + 277)
+#define __NR_waitid (__NR_Linux + 278)
+/* #define __NR_sys_setaltroot (__NR_Linux + 279) */
+#define __NR_add_key (__NR_Linux + 280)
+#define __NR_request_key (__NR_Linux + 281)
+#define __NR_keyctl (__NR_Linux + 282)
+#define __NR_set_thread_area (__NR_Linux + 283)
+#define __NR_inotify_init (__NR_Linux + 284)
+#define __NR_inotify_add_watch (__NR_Linux + 285)
+#define __NR_inotify_rm_watch (__NR_Linux + 286)
+#define __NR_migrate_pages (__NR_Linux + 287)
+#define __NR_openat (__NR_Linux + 288)
+#define __NR_mkdirat (__NR_Linux + 289)
+#define __NR_mknodat (__NR_Linux + 290)
+#define __NR_fchownat (__NR_Linux + 291)
+#define __NR_futimesat (__NR_Linux + 292)
+#define __NR_fstatat64 (__NR_Linux + 293)
+#define __NR_unlinkat (__NR_Linux + 294)
+#define __NR_renameat (__NR_Linux + 295)
+#define __NR_linkat (__NR_Linux + 296)
+#define __NR_symlinkat (__NR_Linux + 297)
+#define __NR_readlinkat (__NR_Linux + 298)
+#define __NR_fchmodat (__NR_Linux + 299)
+#define __NR_faccessat (__NR_Linux + 300)
+#define __NR_pselect6 (__NR_Linux + 301)
+#define __NR_ppoll (__NR_Linux + 302)
+#define __NR_unshare (__NR_Linux + 303)
+#define __NR_splice (__NR_Linux + 304)
+#define __NR_sync_file_range (__NR_Linux + 305)
+#define __NR_tee (__NR_Linux + 306)
+#define __NR_vmsplice (__NR_Linux + 307)
+#define __NR_move_pages (__NR_Linux + 308)
+#define __NR_set_robust_list (__NR_Linux + 309)
+#define __NR_get_robust_list (__NR_Linux + 310)
+#define __NR_kexec_load (__NR_Linux + 311)
+#define __NR_getcpu (__NR_Linux + 312)
+#define __NR_epoll_pwait (__NR_Linux + 313)
+#define __NR_ioprio_set (__NR_Linux + 314)
+#define __NR_ioprio_get (__NR_Linux + 315)
+#define __NR_utimensat (__NR_Linux + 316)
+#define __NR_signalfd (__NR_Linux + 317)
+#define __NR_timerfd (__NR_Linux + 318)
+#define __NR_eventfd (__NR_Linux + 319)
+#define __NR_fallocate (__NR_Linux + 320)
+#define __NR_timerfd_create (__NR_Linux + 321)
+#define __NR_timerfd_gettime (__NR_Linux + 322)
+#define __NR_timerfd_settime (__NR_Linux + 323)
+#define __NR_signalfd4 (__NR_Linux + 324)
+#define __NR_eventfd2 (__NR_Linux + 325)
+#define __NR_epoll_create1 (__NR_Linux + 326)
+#define __NR_dup3 (__NR_Linux + 327)
+#define __NR_pipe2 (__NR_Linux + 328)
+#define __NR_inotify_init1 (__NR_Linux + 329)
+
+/*
+ * Offset of the last Linux o32 flavoured syscall
+ */
+#define __NR_Linux_syscalls 329
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
+
+#define __NR_O32_Linux 4000
+#define __NR_O32_Linux_syscalls 329
+
+#if _MIPS_SIM == _MIPS_SIM_ABI64
+
+/*
+ * Linux 64-bit syscalls are in the range from 5000 to 5999.
+ */
+#define __NR_Linux 5000
+#define __NR_read (__NR_Linux + 0)
+#define __NR_write (__NR_Linux + 1)
+#define __NR_open (__NR_Linux + 2)
+#define __NR_close (__NR_Linux + 3)
+#define __NR_stat (__NR_Linux + 4)
+#define __NR_fstat (__NR_Linux + 5)
+#define __NR_lstat (__NR_Linux + 6)
+#define __NR_poll (__NR_Linux + 7)
+#define __NR_lseek (__NR_Linux + 8)
+#define __NR_mmap (__NR_Linux + 9)
+#define __NR_mprotect (__NR_Linux + 10)
+#define __NR_munmap (__NR_Linux + 11)
+#define __NR_brk (__NR_Linux + 12)
+#define __NR_rt_sigaction (__NR_Linux + 13)
+#define __NR_rt_sigprocmask (__NR_Linux + 14)
+#define __NR_ioctl (__NR_Linux + 15)
+#define __NR_pread64 (__NR_Linux + 16)
+#define __NR_pwrite64 (__NR_Linux + 17)
+#define __NR_readv (__NR_Linux + 18)
+#define __NR_writev (__NR_Linux + 19)
+#define __NR_access (__NR_Linux + 20)
+#define __NR_pipe (__NR_Linux + 21)
+#define __NR__newselect (__NR_Linux + 22)
+#define __NR_sched_yield (__NR_Linux + 23)
+#define __NR_mremap (__NR_Linux + 24)
+#define __NR_msync (__NR_Linux + 25)
+#define __NR_mincore (__NR_Linux + 26)
+#define __NR_madvise (__NR_Linux + 27)
+#define __NR_shmget (__NR_Linux + 28)
+#define __NR_shmat (__NR_Linux + 29)
+#define __NR_shmctl (__NR_Linux + 30)
+#define __NR_dup (__NR_Linux + 31)
+#define __NR_dup2 (__NR_Linux + 32)
+#define __NR_pause (__NR_Linux + 33)
+#define __NR_nanosleep (__NR_Linux + 34)
+#define __NR_getitimer (__NR_Linux + 35)
+#define __NR_setitimer (__NR_Linux + 36)
+#define __NR_alarm (__NR_Linux + 37)
+#define __NR_getpid (__NR_Linux + 38)
+#define __NR_sendfile (__NR_Linux + 39)
+#define __NR_socket (__NR_Linux + 40)
+#define __NR_connect (__NR_Linux + 41)
+#define __NR_accept (__NR_Linux + 42)
+#define __NR_sendto (__NR_Linux + 43)
+#define __NR_recvfrom (__NR_Linux + 44)
+#define __NR_sendmsg (__NR_Linux + 45)
+#define __NR_recvmsg (__NR_Linux + 46)
+#define __NR_shutdown (__NR_Linux + 47)
+#define __NR_bind (__NR_Linux + 48)
+#define __NR_listen (__NR_Linux + 49)
+#define __NR_getsockname (__NR_Linux + 50)
+#define __NR_getpeername (__NR_Linux + 51)
+#define __NR_socketpair (__NR_Linux + 52)
+#define __NR_setsockopt (__NR_Linux + 53)
+#define __NR_getsockopt (__NR_Linux + 54)
+#define __NR_clone (__NR_Linux + 55)
+#define __NR_fork (__NR_Linux + 56)
+#define __NR_execve (__NR_Linux + 57)
+#define __NR_exit (__NR_Linux + 58)
+#define __NR_wait4 (__NR_Linux + 59)
+#define __NR_kill (__NR_Linux + 60)
+#define __NR_uname (__NR_Linux + 61)
+#define __NR_semget (__NR_Linux + 62)
+#define __NR_semop (__NR_Linux + 63)
+#define __NR_semctl (__NR_Linux + 64)
+#define __NR_shmdt (__NR_Linux + 65)
+#define __NR_msgget (__NR_Linux + 66)
+#define __NR_msgsnd (__NR_Linux + 67)
+#define __NR_msgrcv (__NR_Linux + 68)
+#define __NR_msgctl (__NR_Linux + 69)
+#define __NR_fcntl (__NR_Linux + 70)
+#define __NR_flock (__NR_Linux + 71)
+#define __NR_fsync (__NR_Linux + 72)
+#define __NR_fdatasync (__NR_Linux + 73)
+#define __NR_truncate (__NR_Linux + 74)
+#define __NR_ftruncate (__NR_Linux + 75)
+#define __NR_getdents (__NR_Linux + 76)
+#define __NR_getcwd (__NR_Linux + 77)
+#define __NR_chdir (__NR_Linux + 78)
+#define __NR_fchdir (__NR_Linux + 79)
+#define __NR_rename (__NR_Linux + 80)
+#define __NR_mkdir (__NR_Linux + 81)
+#define __NR_rmdir (__NR_Linux + 82)
+#define __NR_creat (__NR_Linux + 83)
+#define __NR_link (__NR_Linux + 84)
+#define __NR_unlink (__NR_Linux + 85)
+#define __NR_symlink (__NR_Linux + 86)
+#define __NR_readlink (__NR_Linux + 87)
+#define __NR_chmod (__NR_Linux + 88)
+#define __NR_fchmod (__NR_Linux + 89)
+#define __NR_chown (__NR_Linux + 90)
+#define __NR_fchown (__NR_Linux + 91)
+#define __NR_lchown (__NR_Linux + 92)
+#define __NR_umask (__NR_Linux + 93)
+#define __NR_gettimeofday (__NR_Linux + 94)
+#define __NR_getrlimit (__NR_Linux + 95)
+#define __NR_getrusage (__NR_Linux + 96)
+#define __NR_sysinfo (__NR_Linux + 97)
+#define __NR_times (__NR_Linux + 98)
+#define __NR_ptrace (__NR_Linux + 99)
+#define __NR_getuid (__NR_Linux + 100)
+#define __NR_syslog (__NR_Linux + 101)
+#define __NR_getgid (__NR_Linux + 102)
+#define __NR_setuid (__NR_Linux + 103)
+#define __NR_setgid (__NR_Linux + 104)
+#define __NR_geteuid (__NR_Linux + 105)
+#define __NR_getegid (__NR_Linux + 106)
+#define __NR_setpgid (__NR_Linux + 107)
+#define __NR_getppid (__NR_Linux + 108)
+#define __NR_getpgrp (__NR_Linux + 109)
+#define __NR_setsid (__NR_Linux + 110)
+#define __NR_setreuid (__NR_Linux + 111)
+#define __NR_setregid (__NR_Linux + 112)
+#define __NR_getgroups (__NR_Linux + 113)
+#define __NR_setgroups (__NR_Linux + 114)
+#define __NR_setresuid (__NR_Linux + 115)
+#define __NR_getresuid (__NR_Linux + 116)
+#define __NR_setresgid (__NR_Linux + 117)
+#define __NR_getresgid (__NR_Linux + 118)
+#define __NR_getpgid (__NR_Linux + 119)
+#define __NR_setfsuid (__NR_Linux + 120)
+#define __NR_setfsgid (__NR_Linux + 121)
+#define __NR_getsid (__NR_Linux + 122)
+#define __NR_capget (__NR_Linux + 123)
+#define __NR_capset (__NR_Linux + 124)
+#define __NR_rt_sigpending (__NR_Linux + 125)
+#define __NR_rt_sigtimedwait (__NR_Linux + 126)
+#define __NR_rt_sigqueueinfo (__NR_Linux + 127)
+#define __NR_rt_sigsuspend (__NR_Linux + 128)
+#define __NR_sigaltstack (__NR_Linux + 129)
+#define __NR_utime (__NR_Linux + 130)
+#define __NR_mknod (__NR_Linux + 131)
+#define __NR_personality (__NR_Linux + 132)
+#define __NR_ustat (__NR_Linux + 133)
+#define __NR_statfs (__NR_Linux + 134)
+#define __NR_fstatfs (__NR_Linux + 135)
+#define __NR_sysfs (__NR_Linux + 136)
+#define __NR_getpriority (__NR_Linux + 137)
+#define __NR_setpriority (__NR_Linux + 138)
+#define __NR_sched_setparam (__NR_Linux + 139)
+#define __NR_sched_getparam (__NR_Linux + 140)
+#define __NR_sched_setscheduler (__NR_Linux + 141)
+#define __NR_sched_getscheduler (__NR_Linux + 142)
+#define __NR_sched_get_priority_max (__NR_Linux + 143)
+#define __NR_sched_get_priority_min (__NR_Linux + 144)
+#define __NR_sched_rr_get_interval (__NR_Linux + 145)
+#define __NR_mlock (__NR_Linux + 146)
+#define __NR_munlock (__NR_Linux + 147)
+#define __NR_mlockall (__NR_Linux + 148)
+#define __NR_munlockall (__NR_Linux + 149)
+#define __NR_vhangup (__NR_Linux + 150)
+#define __NR_pivot_root (__NR_Linux + 151)
+#define __NR__sysctl (__NR_Linux + 152)
+#define __NR_prctl (__NR_Linux + 153)
+#define __NR_adjtimex (__NR_Linux + 154)
+#define __NR_setrlimit (__NR_Linux + 155)
+#define __NR_chroot (__NR_Linux + 156)
+#define __NR_sync (__NR_Linux + 157)
+#define __NR_acct (__NR_Linux + 158)
+#define __NR_settimeofday (__NR_Linux + 159)
+#define __NR_mount (__NR_Linux + 160)
+#define __NR_umount2 (__NR_Linux + 161)
+#define __NR_swapon (__NR_Linux + 162)
+#define __NR_swapoff (__NR_Linux + 163)
+#define __NR_reboot (__NR_Linux + 164)
+#define __NR_sethostname (__NR_Linux + 165)
+#define __NR_setdomainname (__NR_Linux + 166)
+#define __NR_create_module (__NR_Linux + 167)
+#define __NR_init_module (__NR_Linux + 168)
+#define __NR_delete_module (__NR_Linux + 169)
+#define __NR_get_kernel_syms (__NR_Linux + 170)
+#define __NR_query_module (__NR_Linux + 171)
+#define __NR_quotactl (__NR_Linux + 172)
+#define __NR_nfsservctl (__NR_Linux + 173)
+#define __NR_getpmsg (__NR_Linux + 174)
+#define __NR_putpmsg (__NR_Linux + 175)
+#define __NR_afs_syscall (__NR_Linux + 176)
+#define __NR_reserved177 (__NR_Linux + 177)
+#define __NR_gettid (__NR_Linux + 178)
+#define __NR_readahead (__NR_Linux + 179)
+#define __NR_setxattr (__NR_Linux + 180)
+#define __NR_lsetxattr (__NR_Linux + 181)
+#define __NR_fsetxattr (__NR_Linux + 182)
+#define __NR_getxattr (__NR_Linux + 183)
+#define __NR_lgetxattr (__NR_Linux + 184)
+#define __NR_fgetxattr (__NR_Linux + 185)
+#define __NR_listxattr (__NR_Linux + 186)
+#define __NR_llistxattr (__NR_Linux + 187)
+#define __NR_flistxattr (__NR_Linux + 188)
+#define __NR_removexattr (__NR_Linux + 189)
+#define __NR_lremovexattr (__NR_Linux + 190)
+#define __NR_fremovexattr (__NR_Linux + 191)
+#define __NR_tkill (__NR_Linux + 192)
+#define __NR_reserved193 (__NR_Linux + 193)
+#define __NR_futex (__NR_Linux + 194)
+#define __NR_sched_setaffinity (__NR_Linux + 195)
+#define __NR_sched_getaffinity (__NR_Linux + 196)
+#define __NR_cacheflush (__NR_Linux + 197)
+#define __NR_cachectl (__NR_Linux + 198)
+#define __NR_sysmips (__NR_Linux + 199)
+#define __NR_io_setup (__NR_Linux + 200)
+#define __NR_io_destroy (__NR_Linux + 201)
+#define __NR_io_getevents (__NR_Linux + 202)
+#define __NR_io_submit (__NR_Linux + 203)
+#define __NR_io_cancel (__NR_Linux + 204)
+#define __NR_exit_group (__NR_Linux + 205)
+#define __NR_lookup_dcookie (__NR_Linux + 206)
+#define __NR_epoll_create (__NR_Linux + 207)
+#define __NR_epoll_ctl (__NR_Linux + 208)
+#define __NR_epoll_wait (__NR_Linux + 209)
+#define __NR_remap_file_pages (__NR_Linux + 210)
+#define __NR_rt_sigreturn (__NR_Linux + 211)
+#define __NR_set_tid_address (__NR_Linux + 212)
+#define __NR_restart_syscall (__NR_Linux + 213)
+#define __NR_semtimedop (__NR_Linux + 214)
+#define __NR_fadvise64 (__NR_Linux + 215)
+#define __NR_timer_create (__NR_Linux + 216)
+#define __NR_timer_settime (__NR_Linux + 217)
+#define __NR_timer_gettime (__NR_Linux + 218)
+#define __NR_timer_getoverrun (__NR_Linux + 219)
+#define __NR_timer_delete (__NR_Linux + 220)
+#define __NR_clock_settime (__NR_Linux + 221)
+#define __NR_clock_gettime (__NR_Linux + 222)
+#define __NR_clock_getres (__NR_Linux + 223)
+#define __NR_clock_nanosleep (__NR_Linux + 224)
+#define __NR_tgkill (__NR_Linux + 225)
+#define __NR_utimes (__NR_Linux + 226)
+#define __NR_mbind (__NR_Linux + 227)
+#define __NR_get_mempolicy (__NR_Linux + 228)
+#define __NR_set_mempolicy (__NR_Linux + 229)
+#define __NR_mq_open (__NR_Linux + 230)
+#define __NR_mq_unlink (__NR_Linux + 231)
+#define __NR_mq_timedsend (__NR_Linux + 232)
+#define __NR_mq_timedreceive (__NR_Linux + 233)
+#define __NR_mq_notify (__NR_Linux + 234)
+#define __NR_mq_getsetattr (__NR_Linux + 235)
+#define __NR_vserver (__NR_Linux + 236)
+#define __NR_waitid (__NR_Linux + 237)
+/* #define __NR_sys_setaltroot (__NR_Linux + 238) */
+#define __NR_add_key (__NR_Linux + 239)
+#define __NR_request_key (__NR_Linux + 240)
+#define __NR_keyctl (__NR_Linux + 241)
+#define __NR_set_thread_area (__NR_Linux + 242)
+#define __NR_inotify_init (__NR_Linux + 243)
+#define __NR_inotify_add_watch (__NR_Linux + 244)
+#define __NR_inotify_rm_watch (__NR_Linux + 245)
+#define __NR_migrate_pages (__NR_Linux + 246)
+#define __NR_openat (__NR_Linux + 247)
+#define __NR_mkdirat (__NR_Linux + 248)
+#define __NR_mknodat (__NR_Linux + 249)
+#define __NR_fchownat (__NR_Linux + 250)
+#define __NR_futimesat (__NR_Linux + 251)
+#define __NR_newfstatat (__NR_Linux + 252)
+#define __NR_unlinkat (__NR_Linux + 253)
+#define __NR_renameat (__NR_Linux + 254)
+#define __NR_linkat (__NR_Linux + 255)
+#define __NR_symlinkat (__NR_Linux + 256)
+#define __NR_readlinkat (__NR_Linux + 257)
+#define __NR_fchmodat (__NR_Linux + 258)
+#define __NR_faccessat (__NR_Linux + 259)
+#define __NR_pselect6 (__NR_Linux + 260)
+#define __NR_ppoll (__NR_Linux + 261)
+#define __NR_unshare (__NR_Linux + 262)
+#define __NR_splice (__NR_Linux + 263)
+#define __NR_sync_file_range (__NR_Linux + 264)
+#define __NR_tee (__NR_Linux + 265)
+#define __NR_vmsplice (__NR_Linux + 266)
+#define __NR_move_pages (__NR_Linux + 267)
+#define __NR_set_robust_list (__NR_Linux + 268)
+#define __NR_get_robust_list (__NR_Linux + 269)
+#define __NR_kexec_load (__NR_Linux + 270)
+#define __NR_getcpu (__NR_Linux + 271)
+#define __NR_epoll_pwait (__NR_Linux + 272)
+#define __NR_ioprio_set (__NR_Linux + 273)
+#define __NR_ioprio_get (__NR_Linux + 274)
+#define __NR_utimensat (__NR_Linux + 275)
+#define __NR_signalfd (__NR_Linux + 276)
+#define __NR_timerfd (__NR_Linux + 277)
+#define __NR_eventfd (__NR_Linux + 278)
+#define __NR_fallocate (__NR_Linux + 279)
+#define __NR_timerfd_create (__NR_Linux + 280)
+#define __NR_timerfd_gettime (__NR_Linux + 281)
+#define __NR_timerfd_settime (__NR_Linux + 282)
+#define __NR_signalfd4 (__NR_Linux + 283)
+#define __NR_eventfd2 (__NR_Linux + 284)
+#define __NR_epoll_create1 (__NR_Linux + 285)
+#define __NR_dup3 (__NR_Linux + 286)
+#define __NR_pipe2 (__NR_Linux + 287)
+#define __NR_inotify_init1 (__NR_Linux + 288)
+
+/*
+ * Offset of the last Linux 64-bit flavoured syscall
+ */
+#define __NR_Linux_syscalls 288
+
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
+
+#define __NR_64_Linux 5000
+#define __NR_64_Linux_syscalls 288
+
+#if _MIPS_SIM == _MIPS_SIM_NABI32
+
+/*
+ * Linux N32 syscalls are in the range from 6000 to 6999.
+ */
+#define __NR_Linux 6000
+#define __NR_read (__NR_Linux + 0)
+#define __NR_write (__NR_Linux + 1)
+#define __NR_open (__NR_Linux + 2)
+#define __NR_close (__NR_Linux + 3)
+#define __NR_stat (__NR_Linux + 4)
+#define __NR_fstat (__NR_Linux + 5)
+#define __NR_lstat (__NR_Linux + 6)
+#define __NR_poll (__NR_Linux + 7)
+#define __NR_lseek (__NR_Linux + 8)
+#define __NR_mmap (__NR_Linux + 9)
+#define __NR_mprotect (__NR_Linux + 10)
+#define __NR_munmap (__NR_Linux + 11)
+#define __NR_brk (__NR_Linux + 12)
+#define __NR_rt_sigaction (__NR_Linux + 13)
+#define __NR_rt_sigprocmask (__NR_Linux + 14)
+#define __NR_ioctl (__NR_Linux + 15)
+#define __NR_pread64 (__NR_Linux + 16)
+#define __NR_pwrite64 (__NR_Linux + 17)
+#define __NR_readv (__NR_Linux + 18)
+#define __NR_writev (__NR_Linux + 19)
+#define __NR_access (__NR_Linux + 20)
+#define __NR_pipe (__NR_Linux + 21)
+#define __NR__newselect (__NR_Linux + 22)
+#define __NR_sched_yield (__NR_Linux + 23)
+#define __NR_mremap (__NR_Linux + 24)
+#define __NR_msync (__NR_Linux + 25)
+#define __NR_mincore (__NR_Linux + 26)
+#define __NR_madvise (__NR_Linux + 27)
+#define __NR_shmget (__NR_Linux + 28)
+#define __NR_shmat (__NR_Linux + 29)
+#define __NR_shmctl (__NR_Linux + 30)
+#define __NR_dup (__NR_Linux + 31)
+#define __NR_dup2 (__NR_Linux + 32)
+#define __NR_pause (__NR_Linux + 33)
+#define __NR_nanosleep (__NR_Linux + 34)
+#define __NR_getitimer (__NR_Linux + 35)
+#define __NR_setitimer (__NR_Linux + 36)
+#define __NR_alarm (__NR_Linux + 37)
+#define __NR_getpid (__NR_Linux + 38)
+#define __NR_sendfile (__NR_Linux + 39)
+#define __NR_socket (__NR_Linux + 40)
+#define __NR_connect (__NR_Linux + 41)
+#define __NR_accept (__NR_Linux + 42)
+#define __NR_sendto (__NR_Linux + 43)
+#define __NR_recvfrom (__NR_Linux + 44)
+#define __NR_sendmsg (__NR_Linux + 45)
+#define __NR_recvmsg (__NR_Linux + 46)
+#define __NR_shutdown (__NR_Linux + 47)
+#define __NR_bind (__NR_Linux + 48)
+#define __NR_listen (__NR_Linux + 49)
+#define __NR_getsockname (__NR_Linux + 50)
+#define __NR_getpeername (__NR_Linux + 51)
+#define __NR_socketpair (__NR_Linux + 52)
+#define __NR_setsockopt (__NR_Linux + 53)
+#define __NR_getsockopt (__NR_Linux + 54)
+#define __NR_clone (__NR_Linux + 55)
+#define __NR_fork (__NR_Linux + 56)
+#define __NR_execve (__NR_Linux + 57)
+#define __NR_exit (__NR_Linux + 58)
+#define __NR_wait4 (__NR_Linux + 59)
+#define __NR_kill (__NR_Linux + 60)
+#define __NR_uname (__NR_Linux + 61)
+#define __NR_semget (__NR_Linux + 62)
+#define __NR_semop (__NR_Linux + 63)
+#define __NR_semctl (__NR_Linux + 64)
+#define __NR_shmdt (__NR_Linux + 65)
+#define __NR_msgget (__NR_Linux + 66)
+#define __NR_msgsnd (__NR_Linux + 67)
+#define __NR_msgrcv (__NR_Linux + 68)
+#define __NR_msgctl (__NR_Linux + 69)
+#define __NR_fcntl (__NR_Linux + 70)
+#define __NR_flock (__NR_Linux + 71)
+#define __NR_fsync (__NR_Linux + 72)
+#define __NR_fdatasync (__NR_Linux + 73)
+#define __NR_truncate (__NR_Linux + 74)
+#define __NR_ftruncate (__NR_Linux + 75)
+#define __NR_getdents (__NR_Linux + 76)
+#define __NR_getcwd (__NR_Linux + 77)
+#define __NR_chdir (__NR_Linux + 78)
+#define __NR_fchdir (__NR_Linux + 79)
+#define __NR_rename (__NR_Linux + 80)
+#define __NR_mkdir (__NR_Linux + 81)
+#define __NR_rmdir (__NR_Linux + 82)
+#define __NR_creat (__NR_Linux + 83)
+#define __NR_link (__NR_Linux + 84)
+#define __NR_unlink (__NR_Linux + 85)
+#define __NR_symlink (__NR_Linux + 86)
+#define __NR_readlink (__NR_Linux + 87)
+#define __NR_chmod (__NR_Linux + 88)
+#define __NR_fchmod (__NR_Linux + 89)
+#define __NR_chown (__NR_Linux + 90)
+#define __NR_fchown (__NR_Linux + 91)
+#define __NR_lchown (__NR_Linux + 92)
+#define __NR_umask (__NR_Linux + 93)
+#define __NR_gettimeofday (__NR_Linux + 94)
+#define __NR_getrlimit (__NR_Linux + 95)
+#define __NR_getrusage (__NR_Linux + 96)
+#define __NR_sysinfo (__NR_Linux + 97)
+#define __NR_times (__NR_Linux + 98)
+#define __NR_ptrace (__NR_Linux + 99)
+#define __NR_getuid (__NR_Linux + 100)
+#define __NR_syslog (__NR_Linux + 101)
+#define __NR_getgid (__NR_Linux + 102)
+#define __NR_setuid (__NR_Linux + 103)
+#define __NR_setgid (__NR_Linux + 104)
+#define __NR_geteuid (__NR_Linux + 105)
+#define __NR_getegid (__NR_Linux + 106)
+#define __NR_setpgid (__NR_Linux + 107)
+#define __NR_getppid (__NR_Linux + 108)
+#define __NR_getpgrp (__NR_Linux + 109)
+#define __NR_setsid (__NR_Linux + 110)
+#define __NR_setreuid (__NR_Linux + 111)
+#define __NR_setregid (__NR_Linux + 112)
+#define __NR_getgroups (__NR_Linux + 113)
+#define __NR_setgroups (__NR_Linux + 114)
+#define __NR_setresuid (__NR_Linux + 115)
+#define __NR_getresuid (__NR_Linux + 116)
+#define __NR_setresgid (__NR_Linux + 117)
+#define __NR_getresgid (__NR_Linux + 118)
+#define __NR_getpgid (__NR_Linux + 119)
+#define __NR_setfsuid (__NR_Linux + 120)
+#define __NR_setfsgid (__NR_Linux + 121)
+#define __NR_getsid (__NR_Linux + 122)
+#define __NR_capget (__NR_Linux + 123)
+#define __NR_capset (__NR_Linux + 124)
+#define __NR_rt_sigpending (__NR_Linux + 125)
+#define __NR_rt_sigtimedwait (__NR_Linux + 126)
+#define __NR_rt_sigqueueinfo (__NR_Linux + 127)
+#define __NR_rt_sigsuspend (__NR_Linux + 128)
+#define __NR_sigaltstack (__NR_Linux + 129)
+#define __NR_utime (__NR_Linux + 130)
+#define __NR_mknod (__NR_Linux + 131)
+#define __NR_personality (__NR_Linux + 132)
+#define __NR_ustat (__NR_Linux + 133)
+#define __NR_statfs (__NR_Linux + 134)
+#define __NR_fstatfs (__NR_Linux + 135)
+#define __NR_sysfs (__NR_Linux + 136)
+#define __NR_getpriority (__NR_Linux + 137)
+#define __NR_setpriority (__NR_Linux + 138)
+#define __NR_sched_setparam (__NR_Linux + 139)
+#define __NR_sched_getparam (__NR_Linux + 140)
+#define __NR_sched_setscheduler (__NR_Linux + 141)
+#define __NR_sched_getscheduler (__NR_Linux + 142)
+#define __NR_sched_get_priority_max (__NR_Linux + 143)
+#define __NR_sched_get_priority_min (__NR_Linux + 144)
+#define __NR_sched_rr_get_interval (__NR_Linux + 145)
+#define __NR_mlock (__NR_Linux + 146)
+#define __NR_munlock (__NR_Linux + 147)
+#define __NR_mlockall (__NR_Linux + 148)
+#define __NR_munlockall (__NR_Linux + 149)
+#define __NR_vhangup (__NR_Linux + 150)
+#define __NR_pivot_root (__NR_Linux + 151)
+#define __NR__sysctl (__NR_Linux + 152)
+#define __NR_prctl (__NR_Linux + 153)
+#define __NR_adjtimex (__NR_Linux + 154)
+#define __NR_setrlimit (__NR_Linux + 155)
+#define __NR_chroot (__NR_Linux + 156)
+#define __NR_sync (__NR_Linux + 157)
+#define __NR_acct (__NR_Linux + 158)
+#define __NR_settimeofday (__NR_Linux + 159)
+#define __NR_mount (__NR_Linux + 160)
+#define __NR_umount2 (__NR_Linux + 161)
+#define __NR_swapon (__NR_Linux + 162)
+#define __NR_swapoff (__NR_Linux + 163)
+#define __NR_reboot (__NR_Linux + 164)
+#define __NR_sethostname (__NR_Linux + 165)
+#define __NR_setdomainname (__NR_Linux + 166)
+#define __NR_create_module (__NR_Linux + 167)
+#define __NR_init_module (__NR_Linux + 168)
+#define __NR_delete_module (__NR_Linux + 169)
+#define __NR_get_kernel_syms (__NR_Linux + 170)
+#define __NR_query_module (__NR_Linux + 171)
+#define __NR_quotactl (__NR_Linux + 172)
+#define __NR_nfsservctl (__NR_Linux + 173)
+#define __NR_getpmsg (__NR_Linux + 174)
+#define __NR_putpmsg (__NR_Linux + 175)
+#define __NR_afs_syscall (__NR_Linux + 176)
+#define __NR_reserved177 (__NR_Linux + 177)
+#define __NR_gettid (__NR_Linux + 178)
+#define __NR_readahead (__NR_Linux + 179)
+#define __NR_setxattr (__NR_Linux + 180)
+#define __NR_lsetxattr (__NR_Linux + 181)
+#define __NR_fsetxattr (__NR_Linux + 182)
+#define __NR_getxattr (__NR_Linux + 183)
+#define __NR_lgetxattr (__NR_Linux + 184)
+#define __NR_fgetxattr (__NR_Linux + 185)
+#define __NR_listxattr (__NR_Linux + 186)
+#define __NR_llistxattr (__NR_Linux + 187)
+#define __NR_flistxattr (__NR_Linux + 188)
+#define __NR_removexattr (__NR_Linux + 189)
+#define __NR_lremovexattr (__NR_Linux + 190)
+#define __NR_fremovexattr (__NR_Linux + 191)
+#define __NR_tkill (__NR_Linux + 192)
+#define __NR_reserved193 (__NR_Linux + 193)
+#define __NR_futex (__NR_Linux + 194)
+#define __NR_sched_setaffinity (__NR_Linux + 195)
+#define __NR_sched_getaffinity (__NR_Linux + 196)
+#define __NR_cacheflush (__NR_Linux + 197)
+#define __NR_cachectl (__NR_Linux + 198)
+#define __NR_sysmips (__NR_Linux + 199)
+#define __NR_io_setup (__NR_Linux + 200)
+#define __NR_io_destroy (__NR_Linux + 201)
+#define __NR_io_getevents (__NR_Linux + 202)
+#define __NR_io_submit (__NR_Linux + 203)
+#define __NR_io_cancel (__NR_Linux + 204)
+#define __NR_exit_group (__NR_Linux + 205)
+#define __NR_lookup_dcookie (__NR_Linux + 206)
+#define __NR_epoll_create (__NR_Linux + 207)
+#define __NR_epoll_ctl (__NR_Linux + 208)
+#define __NR_epoll_wait (__NR_Linux + 209)
+#define __NR_remap_file_pages (__NR_Linux + 210)
+#define __NR_rt_sigreturn (__NR_Linux + 211)
+#define __NR_fcntl64 (__NR_Linux + 212)
+#define __NR_set_tid_address (__NR_Linux + 213)
+#define __NR_restart_syscall (__NR_Linux + 214)
+#define __NR_semtimedop (__NR_Linux + 215)
+#define __NR_fadvise64 (__NR_Linux + 216)
+#define __NR_statfs64 (__NR_Linux + 217)
+#define __NR_fstatfs64 (__NR_Linux + 218)
+#define __NR_sendfile64 (__NR_Linux + 219)
+#define __NR_timer_create (__NR_Linux + 220)
+#define __NR_timer_settime (__NR_Linux + 221)
+#define __NR_timer_gettime (__NR_Linux + 222)
+#define __NR_timer_getoverrun (__NR_Linux + 223)
+#define __NR_timer_delete (__NR_Linux + 224)
+#define __NR_clock_settime (__NR_Linux + 225)
+#define __NR_clock_gettime (__NR_Linux + 226)
+#define __NR_clock_getres (__NR_Linux + 227)
+#define __NR_clock_nanosleep (__NR_Linux + 228)
+#define __NR_tgkill (__NR_Linux + 229)
+#define __NR_utimes (__NR_Linux + 230)
+#define __NR_mbind (__NR_Linux + 231)
+#define __NR_get_mempolicy (__NR_Linux + 232)
+#define __NR_set_mempolicy (__NR_Linux + 233)
+#define __NR_mq_open (__NR_Linux + 234)
+#define __NR_mq_unlink (__NR_Linux + 235)
+#define __NR_mq_timedsend (__NR_Linux + 236)
+#define __NR_mq_timedreceive (__NR_Linux + 237)
+#define __NR_mq_notify (__NR_Linux + 238)
+#define __NR_mq_getsetattr (__NR_Linux + 239)
+#define __NR_vserver (__NR_Linux + 240)
+#define __NR_waitid (__NR_Linux + 241)
+/* #define __NR_sys_setaltroot (__NR_Linux + 242) */
+#define __NR_add_key (__NR_Linux + 243)
+#define __NR_request_key (__NR_Linux + 244)
+#define __NR_keyctl (__NR_Linux + 245)
+#define __NR_set_thread_area (__NR_Linux + 246)
+#define __NR_inotify_init (__NR_Linux + 247)
+#define __NR_inotify_add_watch (__NR_Linux + 248)
+#define __NR_inotify_rm_watch (__NR_Linux + 249)
+#define __NR_migrate_pages (__NR_Linux + 250)
+#define __NR_openat (__NR_Linux + 251)
+#define __NR_mkdirat (__NR_Linux + 252)
+#define __NR_mknodat (__NR_Linux + 253)
+#define __NR_fchownat (__NR_Linux + 254)
+#define __NR_futimesat (__NR_Linux + 255)
+#define __NR_newfstatat (__NR_Linux + 256)
+#define __NR_unlinkat (__NR_Linux + 257)
+#define __NR_renameat (__NR_Linux + 258)
+#define __NR_linkat (__NR_Linux + 259)
+#define __NR_symlinkat (__NR_Linux + 260)
+#define __NR_readlinkat (__NR_Linux + 261)
+#define __NR_fchmodat (__NR_Linux + 262)
+#define __NR_faccessat (__NR_Linux + 263)
+#define __NR_pselect6 (__NR_Linux + 264)
+#define __NR_ppoll (__NR_Linux + 265)
+#define __NR_unshare (__NR_Linux + 266)
+#define __NR_splice (__NR_Linux + 267)
+#define __NR_sync_file_range (__NR_Linux + 268)
+#define __NR_tee (__NR_Linux + 269)
+#define __NR_vmsplice (__NR_Linux + 270)
+#define __NR_move_pages (__NR_Linux + 271)
+#define __NR_set_robust_list (__NR_Linux + 272)
+#define __NR_get_robust_list (__NR_Linux + 273)
+#define __NR_kexec_load (__NR_Linux + 274)
+#define __NR_getcpu (__NR_Linux + 275)
+#define __NR_epoll_pwait (__NR_Linux + 276)
+#define __NR_ioprio_set (__NR_Linux + 277)
+#define __NR_ioprio_get (__NR_Linux + 278)
+#define __NR_utimensat (__NR_Linux + 279)
+#define __NR_signalfd (__NR_Linux + 280)
+#define __NR_timerfd (__NR_Linux + 281)
+#define __NR_eventfd (__NR_Linux + 282)
+#define __NR_fallocate (__NR_Linux + 283)
+#define __NR_timerfd_create (__NR_Linux + 284)
+#define __NR_timerfd_gettime (__NR_Linux + 285)
+#define __NR_timerfd_settime (__NR_Linux + 286)
+#define __NR_signalfd4 (__NR_Linux + 287)
+#define __NR_eventfd2 (__NR_Linux + 288)
+#define __NR_epoll_create1 (__NR_Linux + 289)
+#define __NR_dup3 (__NR_Linux + 290)
+#define __NR_pipe2 (__NR_Linux + 291)
+#define __NR_inotify_init1 (__NR_Linux + 292)
+
+/*
+ * Offset of the last N32 flavoured syscall
+ */
+#define __NR_Linux_syscalls 292
+
+#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
+
+#define __NR_N32_Linux 6000
+#define __NR_N32_Linux_syscalls 292
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+#define __ARCH_OMIT_COMPAT_SYS_GETDENTS64
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+# ifdef CONFIG_32BIT
+# define __ARCH_WANT_STAT64
+# define __ARCH_WANT_SYS_TIME
+# endif
+# ifdef CONFIG_MIPS32_O32
+# define __ARCH_WANT_COMPAT_SYS_TIME
+# endif
+
+/* whitelists for checksyscalls */
+#define __IGNORE_select
+#define __IGNORE_vfork
+#define __IGNORE_time
+#define __IGNORE_uselib
+#define __IGNORE_fadvise64_64
+#define __IGNORE_getdents64
+#if _MIPS_SIM == _MIPS_SIM_NABI32
+#define __IGNORE_truncate64
+#define __IGNORE_ftruncate64
+#define __IGNORE_stat64
+#define __IGNORE_lstat64
+#define __IGNORE_fstat64
+#define __IGNORE_fstatat64
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n" #x "\t=\tsys_ni_syscall")
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_UNISTD_H */
diff --git a/arch/mips/include/asm/user.h b/arch/mips/include/asm/user.h
new file mode 100644
index 00000000000..afa83a4c188
--- /dev/null
+++ b/arch/mips/include/asm/user.h
@@ -0,0 +1,58 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995, 1996, 1999 by Ralf Baechle
+ */
+#ifndef _ASM_USER_H
+#define _ASM_USER_H
+
+#include <asm/page.h>
+#include <asm/reg.h>
+
+/*
+ * Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the `trad-core' bfd, NOT the irix-core). The file
+ * contents are as follows:
+ *
+ * upage: 1 page consisting of a user struct that tells gdb
+ * what is present in the file. Directly after this is a
+ * copy of the task_struct, which is currently not used by gdb,
+ * but it may come in handy at some point. All of the registers
+ * are stored as part of the upage. The upage should always be
+ * only one page long.
+ * data: The data segment follows next. We use current->end_text to
+ * current->brk to pick up all of the user variables, plus any memory
+ * that may have been sbrk'ed. No attempt is made to determine if a
+ * page is demand-zero or if a page is totally unused, we just cover
+ * the entire range. All of the addresses are rounded in such a way
+ * that an integral number of pages is written.
+ * stack: We need the stack information in order to get a meaningful
+ * backtrace. We need to write the data from usp to
+ * current->start_stack, so we round each of these in order to be able
+ * to write an integer number of pages.
+ */
+struct user {
+ unsigned long regs[EF_SIZE / /* integer and fp regs */
+ sizeof(unsigned long) + 64];
+ size_t u_tsize; /* text size (pages) */
+ size_t u_dsize; /* data size (pages) */
+ size_t u_ssize; /* stack size (pages) */
+ unsigned long start_code; /* text starting address */
+ unsigned long start_data; /* data starting address */
+ unsigned long start_stack; /* stack starting address */
+ long int signal; /* signal causing core dump */
+ unsigned long u_ar0; /* help gdb find registers */
+ unsigned long magic; /* identifies a core file */
+ char u_comm[32]; /* user command name */
+};
+
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR (u.start_code)
+#define HOST_DATA_START_ADDR (u.start_data)
+#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _ASM_USER_H */
diff --git a/arch/mips/include/asm/vga.h b/arch/mips/include/asm/vga.h
new file mode 100644
index 00000000000..f4cff7e4fa8
--- /dev/null
+++ b/arch/mips/include/asm/vga.h
@@ -0,0 +1,47 @@
+/*
+ * Access to VGA videoram
+ *
+ * (c) 1998 Martin Mares <mj@ucw.cz>
+ */
+#ifndef _ASM_VGA_H
+#define _ASM_VGA_H
+
+#include <asm/byteorder.h>
+
+/*
+ * On the PC, we can just recalculate addresses and then
+ * access the videoram directly without any black magic.
+ */
+
+#define VGA_MAP_MEM(x, s) (0xb0000000L + (unsigned long)(x))
+
+#define vga_readb(x) (*(x))
+#define vga_writeb(x, y) (*(y) = (x))
+
+#define VT_BUF_HAVE_RW
+/*
+ * These are only needed for supporting VGA or MDA text mode, which use little
+ * endian byte ordering.
+ * In other cases, we can optimize by using native byte ordering and
+ * <linux/vt_buffer.h> has already done the right job for us.
+ */
+
+#undef scr_writew
+#undef scr_readw
+
+static inline void scr_writew(u16 val, volatile u16 *addr)
+{
+ *addr = cpu_to_le16(val);
+}
+
+static inline u16 scr_readw(volatile const u16 *addr)
+{
+ return le16_to_cpu(*addr);
+}
+
+#define scr_memcpyw(d, s, c) memcpy(d, s, c)
+#define scr_memmovew(d, s, c) memmove(d, s, c)
+#define VT_BUF_HAVE_MEMCPYW
+#define VT_BUF_HAVE_MEMMOVEW
+
+#endif /* _ASM_VGA_H */
diff --git a/arch/mips/include/asm/vpe.h b/arch/mips/include/asm/vpe.h
new file mode 100644
index 00000000000..c6e1b961537
--- /dev/null
+++ b/arch/mips/include/asm/vpe.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+#ifndef _ASM_VPE_H
+#define _ASM_VPE_H
+
+struct vpe_notifications {
+ void (*start)(int vpe);
+ void (*stop)(int vpe);
+
+ struct list_head list;
+};
+
+
+extern int vpe_notify(int index, struct vpe_notifications *notify);
+
+extern void *vpe_get_shared(int index);
+extern int vpe_getuid(int index);
+extern int vpe_getgid(int index);
+extern char *vpe_getcwd(int index);
+
+#endif /* _ASM_VPE_H */
diff --git a/arch/mips/include/asm/vr41xx/capcella.h b/arch/mips/include/asm/vr41xx/capcella.h
new file mode 100644
index 00000000000..e0ee05a3dfc
--- /dev/null
+++ b/arch/mips/include/asm/vr41xx/capcella.h
@@ -0,0 +1,43 @@
+/*
+ * capcella.h, Include file for ZAO Networks Capcella.
+ *
+ * Copyright (C) 2002-2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ZAO_CAPCELLA_H
+#define __ZAO_CAPCELLA_H
+
+#include <asm/vr41xx/irq.h>
+
+/*
+ * General-Purpose I/O Pin Number
+ */
+#define PC104PLUS_INTA_PIN 2
+#define PC104PLUS_INTB_PIN 3
+#define PC104PLUS_INTC_PIN 4
+#define PC104PLUS_INTD_PIN 5
+
+/*
+ * Interrupt Number
+ */
+#define RTL8139_1_IRQ GIU_IRQ(PC104PLUS_INTC_PIN)
+#define RTL8139_2_IRQ GIU_IRQ(PC104PLUS_INTD_PIN)
+#define PC104PLUS_INTA_IRQ GIU_IRQ(PC104PLUS_INTA_PIN)
+#define PC104PLUS_INTB_IRQ GIU_IRQ(PC104PLUS_INTB_PIN)
+#define PC104PLUS_INTC_IRQ GIU_IRQ(PC104PLUS_INTC_PIN)
+#define PC104PLUS_INTD_IRQ GIU_IRQ(PC104PLUS_INTD_PIN)
+
+#endif /* __ZAO_CAPCELLA_H */
diff --git a/arch/mips/include/asm/vr41xx/giu.h b/arch/mips/include/asm/vr41xx/giu.h
new file mode 100644
index 00000000000..0bcdd3a5c25
--- /dev/null
+++ b/arch/mips/include/asm/vr41xx/giu.h
@@ -0,0 +1,78 @@
+/*
+ * Include file for NEC VR4100 series General-purpose I/O Unit.
+ *
+ * Copyright (C) 2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __NEC_VR41XX_GIU_H
+#define __NEC_VR41XX_GIU_H
+
+/*
+ * NEC VR4100 series GIU platform device IDs.
+ */
+enum {
+ GPIO_50PINS_PULLUPDOWN,
+ GPIO_36PINS,
+ GPIO_48PINS_EDGE_SELECT,
+};
+
+typedef enum {
+ IRQ_TRIGGER_LEVEL,
+ IRQ_TRIGGER_EDGE,
+ IRQ_TRIGGER_EDGE_FALLING,
+ IRQ_TRIGGER_EDGE_RISING,
+} irq_trigger_t;
+
+typedef enum {
+ IRQ_SIGNAL_THROUGH,
+ IRQ_SIGNAL_HOLD,
+} irq_signal_t;
+
+extern void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, irq_signal_t signal);
+
+typedef enum {
+ IRQ_LEVEL_LOW,
+ IRQ_LEVEL_HIGH,
+} irq_level_t;
+
+extern void vr41xx_set_irq_level(unsigned int pin, irq_level_t level);
+
+typedef enum {
+ GPIO_DATA_LOW,
+ GPIO_DATA_HIGH,
+ GPIO_DATA_INVAL,
+} gpio_data_t;
+
+extern gpio_data_t vr41xx_gpio_get_pin(unsigned int pin);
+extern int vr41xx_gpio_set_pin(unsigned int pin, gpio_data_t data);
+
+typedef enum {
+ GPIO_INPUT,
+ GPIO_OUTPUT,
+ GPIO_OUTPUT_DISABLE,
+} gpio_direction_t;
+
+extern int vr41xx_gpio_set_direction(unsigned int pin, gpio_direction_t dir);
+
+typedef enum {
+ GPIO_PULL_DOWN,
+ GPIO_PULL_UP,
+ GPIO_PULL_DISABLE,
+} gpio_pull_t;
+
+extern int vr41xx_gpio_pullupdown(unsigned int pin, gpio_pull_t pull);
+
+#endif /* __NEC_VR41XX_GIU_H */
diff --git a/arch/mips/include/asm/vr41xx/irq.h b/arch/mips/include/asm/vr41xx/irq.h
new file mode 100644
index 00000000000..d315dfbc08f
--- /dev/null
+++ b/arch/mips/include/asm/vr41xx/irq.h
@@ -0,0 +1,101 @@
+/*
+ * include/asm-mips/vr41xx/irq.h
+ *
+ * Interrupt numbers for NEC VR4100 series.
+ *
+ * Copyright (C) 1999 Michael Klar
+ * Copyright (C) 2001, 2002 Paul Mundt
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ * Copyright (C) 2002 TimeSys Corp.
+ * Copyright (C) 2003-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __NEC_VR41XX_IRQ_H
+#define __NEC_VR41XX_IRQ_H
+
+/*
+ * CPU core Interrupt Numbers
+ */
+#define MIPS_CPU_IRQ_BASE 0
+#define MIPS_CPU_IRQ(x) (MIPS_CPU_IRQ_BASE + (x))
+#define MIPS_SOFTINT0_IRQ MIPS_CPU_IRQ(0)
+#define MIPS_SOFTINT1_IRQ MIPS_CPU_IRQ(1)
+#define INT0_IRQ MIPS_CPU_IRQ(2)
+#define INT1_IRQ MIPS_CPU_IRQ(3)
+#define INT2_IRQ MIPS_CPU_IRQ(4)
+#define INT3_IRQ MIPS_CPU_IRQ(5)
+#define INT4_IRQ MIPS_CPU_IRQ(6)
+#define TIMER_IRQ MIPS_CPU_IRQ(7)
+
+/*
+ * SYINT1 Interrupt Numbers
+ */
+#define SYSINT1_IRQ_BASE 8
+#define SYSINT1_IRQ(x) (SYSINT1_IRQ_BASE + (x))
+#define BATTRY_IRQ SYSINT1_IRQ(0)
+#define POWER_IRQ SYSINT1_IRQ(1)
+#define RTCLONG1_IRQ SYSINT1_IRQ(2)
+#define ELAPSEDTIME_IRQ SYSINT1_IRQ(3)
+/* RFU */
+#define PIU_IRQ SYSINT1_IRQ(5)
+#define AIU_IRQ SYSINT1_IRQ(6)
+#define KIU_IRQ SYSINT1_IRQ(7)
+#define GIUINT_IRQ SYSINT1_IRQ(8)
+#define SIU_IRQ SYSINT1_IRQ(9)
+#define BUSERR_IRQ SYSINT1_IRQ(10)
+#define SOFTINT_IRQ SYSINT1_IRQ(11)
+#define CLKRUN_IRQ SYSINT1_IRQ(12)
+#define DOZEPIU_IRQ SYSINT1_IRQ(13)
+#define SYSINT1_IRQ_LAST DOZEPIU_IRQ
+
+/*
+ * SYSINT2 Interrupt Numbers
+ */
+#define SYSINT2_IRQ_BASE 24
+#define SYSINT2_IRQ(x) (SYSINT2_IRQ_BASE + (x))
+#define RTCLONG2_IRQ SYSINT2_IRQ(0)
+#define LED_IRQ SYSINT2_IRQ(1)
+#define HSP_IRQ SYSINT2_IRQ(2)
+#define TCLOCK_IRQ SYSINT2_IRQ(3)
+#define FIR_IRQ SYSINT2_IRQ(4)
+#define CEU_IRQ SYSINT2_IRQ(4) /* same number as FIR_IRQ */
+#define DSIU_IRQ SYSINT2_IRQ(5)
+#define PCI_IRQ SYSINT2_IRQ(6)
+#define SCU_IRQ SYSINT2_IRQ(7)
+#define CSI_IRQ SYSINT2_IRQ(8)
+#define BCU_IRQ SYSINT2_IRQ(9)
+#define ETHERNET_IRQ SYSINT2_IRQ(10)
+#define SYSINT2_IRQ_LAST ETHERNET_IRQ
+
+/*
+ * GIU Interrupt Numbers
+ */
+#define GIU_IRQ_BASE 40
+#define GIU_IRQ(x) (GIU_IRQ_BASE + (x)) /* IRQ 40-71 */
+#define GIU_IRQ_LAST GIU_IRQ(31)
+
+/*
+ * VRC4173 Interrupt Numbers
+ */
+#define VRC4173_IRQ_BASE 72
+#define VRC4173_IRQ(x) (VRC4173_IRQ_BASE + (x))
+#define VRC4173_USB_IRQ VRC4173_IRQ(0)
+#define VRC4173_PCMCIA2_IRQ VRC4173_IRQ(1)
+#define VRC4173_PCMCIA1_IRQ VRC4173_IRQ(2)
+#define VRC4173_PS2CH2_IRQ VRC4173_IRQ(3)
+#define VRC4173_PS2CH1_IRQ VRC4173_IRQ(4)
+#define VRC4173_PIU_IRQ VRC4173_IRQ(5)
+#define VRC4173_AIU_IRQ VRC4173_IRQ(6)
+#define VRC4173_KIU_IRQ VRC4173_IRQ(7)
+#define VRC4173_GIU_IRQ VRC4173_IRQ(8)
+#define VRC4173_AC97_IRQ VRC4173_IRQ(9)
+#define VRC4173_AC97INT1_IRQ VRC4173_IRQ(10)
+/* RFU */
+#define VRC4173_DOZEPIU_IRQ VRC4173_IRQ(13)
+#define VRC4173_IRQ_LAST VRC4173_DOZEPIU_IRQ
+
+#endif /* __NEC_VR41XX_IRQ_H */
diff --git a/arch/mips/include/asm/vr41xx/mpc30x.h b/arch/mips/include/asm/vr41xx/mpc30x.h
new file mode 100644
index 00000000000..1d67df843dc
--- /dev/null
+++ b/arch/mips/include/asm/vr41xx/mpc30x.h
@@ -0,0 +1,37 @@
+/*
+ * mpc30x.h, Include file for Victor MP-C303/304.
+ *
+ * Copyright (C) 2002-2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __VICTOR_MPC30X_H
+#define __VICTOR_MPC30X_H
+
+#include <asm/vr41xx/irq.h>
+
+/*
+ * General-Purpose I/O Pin Number
+ */
+#define VRC4173_PIN 1
+#define MQ200_PIN 4
+
+/*
+ * Interrupt Number
+ */
+#define VRC4173_CASCADE_IRQ GIU_IRQ(VRC4173_PIN)
+#define MQ200_IRQ GIU_IRQ(MQ200_PIN)
+
+#endif /* __VICTOR_MPC30X_H */
diff --git a/arch/mips/include/asm/vr41xx/pci.h b/arch/mips/include/asm/vr41xx/pci.h
new file mode 100644
index 00000000000..6fc01ce1977
--- /dev/null
+++ b/arch/mips/include/asm/vr41xx/pci.h
@@ -0,0 +1,90 @@
+/*
+ * Include file for NEC VR4100 series PCI Control Unit.
+ *
+ * Copyright (C) 2004-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __NEC_VR41XX_PCI_H
+#define __NEC_VR41XX_PCI_H
+
+#define PCI_MASTER_ADDRESS_MASK 0x7fffffffU
+
+struct pci_master_address_conversion {
+ uint32_t bus_base_address;
+ uint32_t address_mask;
+ uint32_t pci_base_address;
+};
+
+struct pci_target_address_conversion {
+ uint32_t address_mask;
+ uint32_t bus_base_address;
+};
+
+typedef enum {
+ CANNOT_LOCK_FROM_DEVICE,
+ CAN_LOCK_FROM_DEVICE,
+} pci_exclusive_access_t;
+
+struct pci_mailbox_address {
+ uint32_t base_address;
+};
+
+struct pci_target_address_window {
+ uint32_t base_address;
+};
+
+typedef enum {
+ PCI_ARBITRATION_MODE_FAIR,
+ PCI_ARBITRATION_MODE_ALTERNATE_0,
+ PCI_ARBITRATION_MODE_ALTERNATE_B,
+} pci_arbiter_priority_control_t;
+
+typedef enum {
+ PCI_TAKE_AWAY_GNT_DISABLE,
+ PCI_TAKE_AWAY_GNT_ENABLE,
+} pci_take_away_gnt_mode_t;
+
+struct pci_controller_unit_setup {
+ struct pci_master_address_conversion *master_memory1;
+ struct pci_master_address_conversion *master_memory2;
+
+ struct pci_target_address_conversion *target_memory1;
+ struct pci_target_address_conversion *target_memory2;
+
+ struct pci_master_address_conversion *master_io;
+
+ pci_exclusive_access_t exclusive_access;
+
+ uint32_t pci_clock_max;
+ uint8_t wait_time_limit_from_irdy_to_trdy; /* Only VR4122 is supported */
+
+ struct pci_mailbox_address *mailbox;
+ struct pci_target_address_window *target_window1;
+ struct pci_target_address_window *target_window2;
+
+ uint8_t master_latency_timer;
+ uint8_t retry_limit;
+
+ pci_arbiter_priority_control_t arbiter_priority_control;
+ pci_take_away_gnt_mode_t take_away_gnt_mode;
+
+ struct resource *mem_resource;
+ struct resource *io_resource;
+};
+
+extern void vr41xx_pciu_setup(struct pci_controller_unit_setup *setup);
+
+#endif /* __NEC_VR41XX_PCI_H */
diff --git a/arch/mips/include/asm/vr41xx/siu.h b/arch/mips/include/asm/vr41xx/siu.h
new file mode 100644
index 00000000000..da9f6e37340
--- /dev/null
+++ b/arch/mips/include/asm/vr41xx/siu.h
@@ -0,0 +1,58 @@
+/*
+ * Include file for NEC VR4100 series Serial Interface Unit.
+ *
+ * Copyright (C) 2005-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __NEC_VR41XX_SIU_H
+#define __NEC_VR41XX_SIU_H
+
+#define SIU_PORTS_MAX 2
+
+typedef enum {
+ SIU_INTERFACE_RS232C,
+ SIU_INTERFACE_IRDA,
+} siu_interface_t;
+
+extern void vr41xx_select_siu_interface(siu_interface_t interface);
+
+typedef enum {
+ SIU_USE_IRDA,
+ FIR_USE_IRDA,
+} irda_use_t;
+
+extern void vr41xx_use_irda(irda_use_t use);
+
+typedef enum {
+ SHARP_IRDA,
+ TEMIC_IRDA,
+ HP_IRDA,
+} irda_module_t;
+
+typedef enum {
+ IRDA_TX_1_5MBPS,
+ IRDA_TX_4MBPS,
+} irda_speed_t;
+
+extern void vr41xx_select_irda_module(irda_module_t module, irda_speed_t speed);
+
+#ifdef CONFIG_SERIAL_VR41XX_CONSOLE
+extern void vr41xx_siu_early_setup(struct uart_port *port);
+#else
+static inline void vr41xx_siu_early_setup(struct uart_port *port) {}
+#endif
+
+#endif /* __NEC_VR41XX_SIU_H */
diff --git a/arch/mips/include/asm/vr41xx/tb0219.h b/arch/mips/include/asm/vr41xx/tb0219.h
new file mode 100644
index 00000000000..dc981b4be0a
--- /dev/null
+++ b/arch/mips/include/asm/vr41xx/tb0219.h
@@ -0,0 +1,42 @@
+/*
+ * tb0219.h, Include file for TANBAC TB0219.
+ *
+ * Copyright (C) 2002-2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ * Modified for TANBAC TB0219:
+ * Copyright (C) 2003 Megasolution Inc. <matsu@megasolution.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __TANBAC_TB0219_H
+#define __TANBAC_TB0219_H
+
+#include <asm/vr41xx/irq.h>
+
+/*
+ * General-Purpose I/O Pin Number
+ */
+#define TB0219_PCI_SLOT1_PIN 2
+#define TB0219_PCI_SLOT2_PIN 3
+#define TB0219_PCI_SLOT3_PIN 4
+
+/*
+ * Interrupt Number
+ */
+#define TB0219_PCI_SLOT1_IRQ GIU_IRQ(TB0219_PCI_SLOT1_PIN)
+#define TB0219_PCI_SLOT2_IRQ GIU_IRQ(TB0219_PCI_SLOT2_PIN)
+#define TB0219_PCI_SLOT3_IRQ GIU_IRQ(TB0219_PCI_SLOT3_PIN)
+
+#endif /* __TANBAC_TB0219_H */
diff --git a/arch/mips/include/asm/vr41xx/tb0226.h b/arch/mips/include/asm/vr41xx/tb0226.h
new file mode 100644
index 00000000000..de527dcfa5f
--- /dev/null
+++ b/arch/mips/include/asm/vr41xx/tb0226.h
@@ -0,0 +1,43 @@
+/*
+ * tb0226.h, Include file for TANBAC TB0226.
+ *
+ * Copyright (C) 2002-2004 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __TANBAC_TB0226_H
+#define __TANBAC_TB0226_H
+
+#include <asm/vr41xx/irq.h>
+
+/*
+ * General-Purpose I/O Pin Number
+ */
+#define GD82559_1_PIN 2
+#define GD82559_2_PIN 3
+#define UPD720100_INTA_PIN 4
+#define UPD720100_INTB_PIN 8
+#define UPD720100_INTC_PIN 13
+
+/*
+ * Interrupt Number
+ */
+#define GD82559_1_IRQ GIU_IRQ(GD82559_1_PIN)
+#define GD82559_2_IRQ GIU_IRQ(GD82559_2_PIN)
+#define UPD720100_INTA_IRQ GIU_IRQ(UPD720100_INTA_PIN)
+#define UPD720100_INTB_IRQ GIU_IRQ(UPD720100_INTB_PIN)
+#define UPD720100_INTC_IRQ GIU_IRQ(UPD720100_INTC_PIN)
+
+#endif /* __TANBAC_TB0226_H */
diff --git a/arch/mips/include/asm/vr41xx/tb0287.h b/arch/mips/include/asm/vr41xx/tb0287.h
new file mode 100644
index 00000000000..61bead68abf
--- /dev/null
+++ b/arch/mips/include/asm/vr41xx/tb0287.h
@@ -0,0 +1,43 @@
+/*
+ * tb0287.h, Include file for TANBAC TB0287 mini-ITX board.
+ *
+ * Copyright (C) 2005 Media Lab Inc. <ito@mlb.co.jp>
+ *
+ * This code is largely based on tb0219.h.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __TANBAC_TB0287_H
+#define __TANBAC_TB0287_H
+
+#include <asm/vr41xx/irq.h>
+
+/*
+ * General-Purpose I/O Pin Number
+ */
+#define TB0287_PCI_SLOT_PIN 2
+#define TB0287_SM501_PIN 3
+#define TB0287_SIL680A_PIN 8
+#define TB0287_RTL8110_PIN 13
+
+/*
+ * Interrupt Number
+ */
+#define TB0287_PCI_SLOT_IRQ GIU_IRQ(TB0287_PCI_SLOT_PIN)
+#define TB0287_SM501_IRQ GIU_IRQ(TB0287_SM501_PIN)
+#define TB0287_SIL680A_IRQ GIU_IRQ(TB0287_SIL680A_PIN)
+#define TB0287_RTL8110_IRQ GIU_IRQ(TB0287_RTL8110_PIN)
+
+#endif /* __TANBAC_TB0287_H */
diff --git a/arch/mips/include/asm/vr41xx/vr41xx.h b/arch/mips/include/asm/vr41xx/vr41xx.h
new file mode 100644
index 00000000000..22be64971cc
--- /dev/null
+++ b/arch/mips/include/asm/vr41xx/vr41xx.h
@@ -0,0 +1,152 @@
+/*
+ * include/asm-mips/vr41xx/vr41xx.h
+ *
+ * Include file for NEC VR4100 series.
+ *
+ * Copyright (C) 1999 Michael Klar
+ * Copyright (C) 2001, 2002 Paul Mundt
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ * Copyright (C) 2002 TimeSys Corp.
+ * Copyright (C) 2003-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __NEC_VR41XX_H
+#define __NEC_VR41XX_H
+
+#include <linux/interrupt.h>
+
+/*
+ * CPU Revision
+ */
+/* VR4122 0x00000c70-0x00000c72 */
+#define PRID_VR4122_REV1_0 0x00000c70
+#define PRID_VR4122_REV2_0 0x00000c70
+#define PRID_VR4122_REV2_1 0x00000c70
+#define PRID_VR4122_REV3_0 0x00000c71
+#define PRID_VR4122_REV3_1 0x00000c72
+
+/* VR4181A 0x00000c73-0x00000c7f */
+#define PRID_VR4181A_REV1_0 0x00000c73
+#define PRID_VR4181A_REV1_1 0x00000c74
+
+/* VR4131 0x00000c80-0x00000c83 */
+#define PRID_VR4131_REV1_2 0x00000c80
+#define PRID_VR4131_REV2_0 0x00000c81
+#define PRID_VR4131_REV2_1 0x00000c82
+#define PRID_VR4131_REV2_2 0x00000c83
+
+/* VR4133 0x00000c84- */
+#define PRID_VR4133 0x00000c84
+
+/*
+ * Bus Control Uint
+ */
+extern unsigned long vr41xx_calculate_clock_frequency(void);
+extern unsigned long vr41xx_get_vtclock_frequency(void);
+extern unsigned long vr41xx_get_tclock_frequency(void);
+
+/*
+ * Clock Mask Unit
+ */
+typedef enum {
+ PIU_CLOCK,
+ SIU_CLOCK,
+ AIU_CLOCK,
+ KIU_CLOCK,
+ FIR_CLOCK,
+ DSIU_CLOCK,
+ CSI_CLOCK,
+ PCIU_CLOCK,
+ HSP_CLOCK,
+ PCI_CLOCK,
+ CEU_CLOCK,
+ ETHER0_CLOCK,
+ ETHER1_CLOCK
+} vr41xx_clock_t;
+
+extern void vr41xx_supply_clock(vr41xx_clock_t clock);
+extern void vr41xx_mask_clock(vr41xx_clock_t clock);
+
+/*
+ * Interrupt Control Unit
+ */
+extern int vr41xx_set_intassign(unsigned int irq, unsigned char intassign);
+extern int cascade_irq(unsigned int irq, int (*get_irq)(unsigned int));
+
+#define PIUINT_COMMAND 0x0040
+#define PIUINT_DATA 0x0020
+#define PIUINT_PAGE1 0x0010
+#define PIUINT_PAGE0 0x0008
+#define PIUINT_DATALOST 0x0004
+#define PIUINT_STATUSCHANGE 0x0001
+
+extern void vr41xx_enable_piuint(uint16_t mask);
+extern void vr41xx_disable_piuint(uint16_t mask);
+
+#define AIUINT_INPUT_DMAEND 0x0800
+#define AIUINT_INPUT_DMAHALT 0x0400
+#define AIUINT_INPUT_DATALOST 0x0200
+#define AIUINT_INPUT_DATA 0x0100
+#define AIUINT_OUTPUT_DMAEND 0x0008
+#define AIUINT_OUTPUT_DMAHALT 0x0004
+#define AIUINT_OUTPUT_NODATA 0x0002
+
+extern void vr41xx_enable_aiuint(uint16_t mask);
+extern void vr41xx_disable_aiuint(uint16_t mask);
+
+#define KIUINT_DATALOST 0x0004
+#define KIUINT_DATAREADY 0x0002
+#define KIUINT_SCAN 0x0001
+
+extern void vr41xx_enable_kiuint(uint16_t mask);
+extern void vr41xx_disable_kiuint(uint16_t mask);
+
+#define DSIUINT_CTS 0x0800
+#define DSIUINT_RXERR 0x0400
+#define DSIUINT_RX 0x0200
+#define DSIUINT_TX 0x0100
+#define DSIUINT_ALL 0x0f00
+
+extern void vr41xx_enable_dsiuint(uint16_t mask);
+extern void vr41xx_disable_dsiuint(uint16_t mask);
+
+#define FIRINT_UNIT 0x0010
+#define FIRINT_RX_DMAEND 0x0008
+#define FIRINT_RX_DMAHALT 0x0004
+#define FIRINT_TX_DMAEND 0x0002
+#define FIRINT_TX_DMAHALT 0x0001
+
+extern void vr41xx_enable_firint(uint16_t mask);
+extern void vr41xx_disable_firint(uint16_t mask);
+
+extern void vr41xx_enable_pciint(void);
+extern void vr41xx_disable_pciint(void);
+
+extern void vr41xx_enable_scuint(void);
+extern void vr41xx_disable_scuint(void);
+
+#define CSIINT_TX_DMAEND 0x0040
+#define CSIINT_TX_DMAHALT 0x0020
+#define CSIINT_TX_DATA 0x0010
+#define CSIINT_TX_FIFOEMPTY 0x0008
+#define CSIINT_RX_DMAEND 0x0004
+#define CSIINT_RX_DMAHALT 0x0002
+#define CSIINT_RX_FIFOEMPTY 0x0001
+
+extern void vr41xx_enable_csiint(uint16_t mask);
+extern void vr41xx_disable_csiint(uint16_t mask);
+
+extern void vr41xx_enable_bcuint(void);
+extern void vr41xx_disable_bcuint(void);
+
+#ifdef CONFIG_SERIAL_VR41XX_CONSOLE
+extern void vr41xx_siu_setup(void);
+#else
+static inline void vr41xx_siu_setup(void) {}
+#endif
+
+#endif /* __NEC_VR41XX_H */
diff --git a/arch/mips/include/asm/war.h b/arch/mips/include/asm/war.h
new file mode 100644
index 00000000000..22361d5e3bf
--- /dev/null
+++ b/arch/mips/include/asm/war.h
@@ -0,0 +1,244 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle
+ * Copyright (C) 2007 Maciej W. Rozycki
+ */
+#ifndef _ASM_WAR_H
+#define _ASM_WAR_H
+
+#include <war.h>
+
+/*
+ * Work around certain R4000 CPU errata (as implemented by GCC):
+ *
+ * - A double-word or a variable shift may give an incorrect result
+ * if executed immediately after starting an integer division:
+ * "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0",
+ * erratum #28
+ * "MIPS R4000MC Errata, Processor Revision 2.2 and 3.0", erratum
+ * #19
+ *
+ * - A double-word or a variable shift may give an incorrect result
+ * if executed while an integer multiplication is in progress:
+ * "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0",
+ * errata #16 & #28
+ *
+ * - An integer division may give an incorrect result if started in
+ * a delay slot of a taken branch or a jump:
+ * "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0",
+ * erratum #52
+ */
+#ifdef CONFIG_CPU_R4000_WORKAROUNDS
+#define R4000_WAR 1
+#else
+#define R4000_WAR 0
+#endif
+
+/*
+ * Work around certain R4400 CPU errata (as implemented by GCC):
+ *
+ * - A double-word or a variable shift may give an incorrect result
+ * if executed immediately after starting an integer division:
+ * "MIPS R4400MC Errata, Processor Revision 1.0", erratum #10
+ * "MIPS R4400MC Errata, Processor Revision 2.0 & 3.0", erratum #4
+ */
+#ifdef CONFIG_CPU_R4400_WORKAROUNDS
+#define R4400_WAR 1
+#else
+#define R4400_WAR 0
+#endif
+
+/*
+ * Work around the "daddi" and "daddiu" CPU errata:
+ *
+ * - The `daddi' instruction fails to trap on overflow.
+ * "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0",
+ * erratum #23
+ *
+ * - The `daddiu' instruction can produce an incorrect result.
+ * "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0",
+ * erratum #41
+ * "MIPS R4000MC Errata, Processor Revision 2.2 and 3.0", erratum
+ * #15
+ * "MIPS R4400PC/SC Errata, Processor Revision 1.0", erratum #7
+ * "MIPS R4400MC Errata, Processor Revision 1.0", erratum #5
+ */
+#ifdef CONFIG_CPU_DADDI_WORKAROUNDS
+#define DADDI_WAR 1
+#else
+#define DADDI_WAR 0
+#endif
+
+/*
+ * Another R4600 erratum. Due to the lack of errata information the exact
+ * technical details aren't known. I've experimentally found that disabling
+ * interrupts during indexed I-cache flushes seems to be sufficient to deal
+ * with the issue.
+ */
+#ifndef R4600_V1_INDEX_ICACHEOP_WAR
+#error Check setting of R4600_V1_INDEX_ICACHEOP_WAR for your platform
+#endif
+
+/*
+ * Pleasures of the R4600 V1.x. Cite from the IDT R4600 V1.7 errata:
+ *
+ * 18. The CACHE instructions Hit_Writeback_Invalidate_D, Hit_Writeback_D,
+ * Hit_Invalidate_D and Create_Dirty_Excl_D should only be
+ * executed if there is no other dcache activity. If the dcache is
+ * accessed for another instruction immeidately preceding when these
+ * cache instructions are executing, it is possible that the dcache
+ * tag match outputs used by these cache instructions will be
+ * incorrect. These cache instructions should be preceded by at least
+ * four instructions that are not any kind of load or store
+ * instruction.
+ *
+ * This is not allowed: lw
+ * nop
+ * nop
+ * nop
+ * cache Hit_Writeback_Invalidate_D
+ *
+ * This is allowed: lw
+ * nop
+ * nop
+ * nop
+ * nop
+ * cache Hit_Writeback_Invalidate_D
+ */
+#ifndef R4600_V1_HIT_CACHEOP_WAR
+#error Check setting of R4600_V1_HIT_CACHEOP_WAR for your platform
+#endif
+
+
+/*
+ * Writeback and invalidate the primary cache dcache before DMA.
+ *
+ * R4600 v2.0 bug: "The CACHE instructions Hit_Writeback_Inv_D,
+ * Hit_Writeback_D, Hit_Invalidate_D and Create_Dirty_Exclusive_D will only
+ * operate correctly if the internal data cache refill buffer is empty. These
+ * CACHE instructions should be separated from any potential data cache miss
+ * by a load instruction to an uncached address to empty the response buffer."
+ * (Revision 2.0 device errata from IDT available on http://www.idt.com/
+ * in .pdf format.)
+ */
+#ifndef R4600_V2_HIT_CACHEOP_WAR
+#error Check setting of R4600_V2_HIT_CACHEOP_WAR for your platform
+#endif
+
+/*
+ * When an interrupt happens on a CP0 register read instruction, CPU may
+ * lock up or read corrupted values of CP0 registers after it enters
+ * the exception handler.
+ *
+ * This workaround makes sure that we read a "safe" CP0 register as the
+ * first thing in the exception handler, which breaks one of the
+ * pre-conditions for this problem.
+ */
+#ifndef R5432_CP0_INTERRUPT_WAR
+#error Check setting of R5432_CP0_INTERRUPT_WAR for your platform
+#endif
+
+/*
+ * Workaround for the Sibyte M3 errata the text of which can be found at
+ *
+ * http://sibyte.broadcom.com/hw/bcm1250/docs/pass2errata.txt
+ *
+ * This will enable the use of a special TLB refill handler which does a
+ * consistency check on the information in c0_badvaddr and c0_entryhi and
+ * will just return and take the exception again if the information was
+ * found to be inconsistent.
+ */
+#ifndef BCM1250_M3_WAR
+#error Check setting of BCM1250_M3_WAR for your platform
+#endif
+
+/*
+ * This is a DUART workaround related to glitches around register accesses
+ */
+#ifndef SIBYTE_1956_WAR
+#error Check setting of SIBYTE_1956_WAR for your platform
+#endif
+
+/*
+ * Fill buffers not flushed on CACHE instructions
+ *
+ * Hit_Invalidate_I cacheops invalidate an icache line but the refill
+ * for that line can get stale data from the fill buffer instead of
+ * accessing memory if the previous icache miss was also to that line.
+ *
+ * Workaround: generate an icache refill from a different line
+ *
+ * Affects:
+ * MIPS 4K RTL revision <3.0, PRID revision <4
+ */
+#ifndef MIPS4K_ICACHE_REFILL_WAR
+#error Check setting of MIPS4K_ICACHE_REFILL_WAR for your platform
+#endif
+
+/*
+ * Missing implicit forced flush of evictions caused by CACHE
+ * instruction
+ *
+ * Evictions caused by a CACHE instructions are not forced on to the
+ * bus. The BIU gives higher priority to fetches than to the data from
+ * the eviction buffer and no collision detection is performed between
+ * fetches and pending data from the eviction buffer.
+ *
+ * Workaround: Execute a SYNC instruction after the cache instruction
+ *
+ * Affects:
+ * MIPS 5Kc,5Kf RTL revision <2.3, PRID revision <8
+ * MIPS 20Kc RTL revision <4.0, PRID revision <?
+ */
+#ifndef MIPS_CACHE_SYNC_WAR
+#error Check setting of MIPS_CACHE_SYNC_WAR for your platform
+#endif
+
+/*
+ * From TX49/H2 manual: "If the instruction (i.e. CACHE) is issued for
+ * the line which this instruction itself exists, the following
+ * operation is not guaranteed."
+ *
+ * Workaround: do two phase flushing for Index_Invalidate_I
+ */
+#ifndef TX49XX_ICACHE_INDEX_INV_WAR
+#error Check setting of TX49XX_ICACHE_INDEX_INV_WAR for your platform
+#endif
+
+/*
+ * On the RM9000 there is a problem which makes the CreateDirtyExclusive
+ * eache operation unusable on SMP systems.
+ */
+#ifndef RM9000_CDEX_SMP_WAR
+#error Check setting of RM9000_CDEX_SMP_WAR for your platform
+#endif
+
+/*
+ * The RM7000 processors and the E9000 cores have a bug (though PMC-Sierra
+ * opposes it being called that) where invalid instructions in the same
+ * I-cache line worth of instructions being fetched may case spurious
+ * exceptions.
+ */
+#ifndef ICACHE_REFILLS_WORKAROUND_WAR
+#error Check setting of ICACHE_REFILLS_WORKAROUND_WAR for your platform
+#endif
+
+/*
+ * On the R10000 upto version 2.6 (not sure about 2.7) there is a bug that
+ * may cause ll / sc and lld / scd sequences to execute non-atomically.
+ */
+#ifndef R10000_LLSC_WAR
+#error Check setting of R10000_LLSC_WAR for your platform
+#endif
+
+/*
+ * 34K core erratum: "Problems Executing the TLBR Instruction"
+ */
+#ifndef MIPS34K_MISSED_ITLB_WAR
+#error Check setting of MIPS34K_MISSED_ITLB_WAR for your platform
+#endif
+
+#endif /* _ASM_WAR_H */
diff --git a/arch/mips/include/asm/watch.h b/arch/mips/include/asm/watch.h
new file mode 100644
index 00000000000..20126ec7935
--- /dev/null
+++ b/arch/mips/include/asm/watch.h
@@ -0,0 +1,32 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 David Daney
+ */
+#ifndef _ASM_WATCH_H
+#define _ASM_WATCH_H
+
+#include <linux/bitops.h>
+
+#include <asm/mipsregs.h>
+
+void mips_install_watch_registers(void);
+void mips_read_watch_registers(void);
+void mips_clear_watch_registers(void);
+void mips_probe_watch_registers(struct cpuinfo_mips *c);
+
+#ifdef CONFIG_HARDWARE_WATCHPOINTS
+#define __restore_watch() do { \
+ if (unlikely(test_bit(TIF_LOAD_WATCH, \
+ &current_thread_info()->flags))) { \
+ mips_install_watch_registers(); \
+ } \
+} while (0)
+
+#else
+#define __restore_watch() do {} while (0)
+#endif
+
+#endif /* _ASM_WATCH_H */
diff --git a/arch/mips/include/asm/wbflush.h b/arch/mips/include/asm/wbflush.h
new file mode 100644
index 00000000000..eadc0ac47e2
--- /dev/null
+++ b/arch/mips/include/asm/wbflush.h
@@ -0,0 +1,34 @@
+/*
+ * Header file for using the wbflush routine
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1998 Harald Koerfgen
+ * Copyright (C) 2002 Maciej W. Rozycki
+ */
+#ifndef _ASM_WBFLUSH_H
+#define _ASM_WBFLUSH_H
+
+
+#ifdef CONFIG_CPU_HAS_WB
+
+extern void (*__wbflush)(void);
+extern void wbflush_setup(void);
+
+#define wbflush() \
+ do { \
+ __sync(); \
+ __wbflush(); \
+ } while (0)
+
+#else /* !CONFIG_CPU_HAS_WB */
+
+#define wbflush_setup() do { } while (0)
+
+#define wbflush() fast_iob()
+
+#endif /* !CONFIG_CPU_HAS_WB */
+
+#endif /* _ASM_WBFLUSH_H */
diff --git a/arch/mips/include/asm/xor.h b/arch/mips/include/asm/xor.h
new file mode 100644
index 00000000000..c82eb12a5b1
--- /dev/null
+++ b/arch/mips/include/asm/xor.h
@@ -0,0 +1 @@
+#include <asm-generic/xor.h>
diff --git a/arch/mips/include/asm/xtalk/xtalk.h b/arch/mips/include/asm/xtalk/xtalk.h
new file mode 100644
index 00000000000..79bac882a73
--- /dev/null
+++ b/arch/mips/include/asm/xtalk/xtalk.h
@@ -0,0 +1,52 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * xtalk.h -- platform-independent crosstalk interface, derived from
+ * IRIX <sys/PCI/bridge.h>, revision 1.38.
+ *
+ * Copyright (C) 1995 - 1997, 1999 Silcon Graphics, Inc.
+ * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_XTALK_XTALK_H
+#define _ASM_XTALK_XTALK_H
+
+#ifndef __ASSEMBLY__
+/*
+ * User-level device driver visible types
+ */
+typedef char xwidgetnum_t; /* xtalk widget number (0..15) */
+
+#define XWIDGET_NONE -1
+
+typedef int xwidget_part_num_t; /* xtalk widget part number */
+
+#define XWIDGET_PART_NUM_NONE -1
+
+typedef int xwidget_rev_num_t; /* xtalk widget revision number */
+
+#define XWIDGET_REV_NUM_NONE -1
+
+typedef int xwidget_mfg_num_t; /* xtalk widget manufacturing ID */
+
+#define XWIDGET_MFG_NUM_NONE -1
+
+typedef struct xtalk_piomap_s *xtalk_piomap_t;
+
+/* It is often convenient to fold the XIO target port
+ * number into the XIO address.
+ */
+#define XIO_NOWHERE (0xFFFFFFFFFFFFFFFFull)
+#define XIO_ADDR_BITS (0x0000FFFFFFFFFFFFull)
+#define XIO_PORT_BITS (0xF000000000000000ull)
+#define XIO_PORT_SHIFT (60)
+
+#define XIO_PACKED(x) (((x)&XIO_PORT_BITS) != 0)
+#define XIO_ADDR(x) ((x)&XIO_ADDR_BITS)
+#define XIO_PORT(x) ((xwidgetnum_t)(((x)&XIO_PORT_BITS) >> XIO_PORT_SHIFT))
+#define XIO_PACK(p, o) ((((uint64_t)(p))<<XIO_PORT_SHIFT) | ((o)&XIO_ADDR_BITS))
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_XTALK_XTALK_H */
diff --git a/arch/mips/include/asm/xtalk/xwidget.h b/arch/mips/include/asm/xtalk/xwidget.h
new file mode 100644
index 00000000000..b4a13d7405e
--- /dev/null
+++ b/arch/mips/include/asm/xtalk/xwidget.h
@@ -0,0 +1,167 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * xwidget.h - generic crosstalk widget header file, derived from IRIX
+ * <sys/xtalk/xtalkwidget.h>, revision 1.32.
+ *
+ * Copyright (C) 1996, 1999 Silcon Graphics, Inc.
+ * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_XTALK_XWIDGET_H
+#define _ASM_XTALK_XWIDGET_H
+
+#include <linux/types.h>
+#include <asm/xtalk/xtalk.h>
+
+#define WIDGET_ID 0x04
+#define WIDGET_STATUS 0x0c
+#define WIDGET_ERR_UPPER_ADDR 0x14
+#define WIDGET_ERR_LOWER_ADDR 0x1c
+#define WIDGET_CONTROL 0x24
+#define WIDGET_REQ_TIMEOUT 0x2c
+#define WIDGET_INTDEST_UPPER_ADDR 0x34
+#define WIDGET_INTDEST_LOWER_ADDR 0x3c
+#define WIDGET_ERR_CMD_WORD 0x44
+#define WIDGET_LLP_CFG 0x4c
+#define WIDGET_TFLUSH 0x54
+
+/* WIDGET_ID */
+#define WIDGET_REV_NUM 0xf0000000
+#define WIDGET_PART_NUM 0x0ffff000
+#define WIDGET_MFG_NUM 0x00000ffe
+#define WIDGET_REV_NUM_SHFT 28
+#define WIDGET_PART_NUM_SHFT 12
+#define WIDGET_MFG_NUM_SHFT 1
+
+#define XWIDGET_PART_NUM(widgetid) (((widgetid) & WIDGET_PART_NUM) >> WIDGET_PART_NUM_SHFT)
+#define XWIDGET_REV_NUM(widgetid) (((widgetid) & WIDGET_REV_NUM) >> WIDGET_REV_NUM_SHFT)
+#define XWIDGET_MFG_NUM(widgetid) (((widgetid) & WIDGET_MFG_NUM) >> WIDGET_MFG_NUM_SHFT)
+
+/* WIDGET_STATUS */
+#define WIDGET_LLP_REC_CNT 0xff000000
+#define WIDGET_LLP_TX_CNT 0x00ff0000
+#define WIDGET_PENDING 0x0000001f
+
+/* WIDGET_ERR_UPPER_ADDR */
+#define WIDGET_ERR_UPPER_ADDR_ONLY 0x0000ffff
+
+/* WIDGET_CONTROL */
+#define WIDGET_F_BAD_PKT 0x00010000
+#define WIDGET_LLP_XBAR_CRD 0x0000f000
+#define WIDGET_LLP_XBAR_CRD_SHFT 12
+#define WIDGET_CLR_RLLP_CNT 0x00000800
+#define WIDGET_CLR_TLLP_CNT 0x00000400
+#define WIDGET_SYS_END 0x00000200
+#define WIDGET_MAX_TRANS 0x000001f0
+#define WIDGET_WIDGET_ID 0x0000000f
+
+/* WIDGET_INTDEST_UPPER_ADDR */
+#define WIDGET_INT_VECTOR 0xff000000
+#define WIDGET_INT_VECTOR_SHFT 24
+#define WIDGET_TARGET_ID 0x000f0000
+#define WIDGET_TARGET_ID_SHFT 16
+#define WIDGET_UPP_ADDR 0x0000ffff
+
+/* WIDGET_ERR_CMD_WORD */
+#define WIDGET_DIDN 0xf0000000
+#define WIDGET_SIDN 0x0f000000
+#define WIDGET_PACTYP 0x00f00000
+#define WIDGET_TNUM 0x000f8000
+#define WIDGET_COHERENT 0x00004000
+#define WIDGET_DS 0x00003000
+#define WIDGET_GBR 0x00000800
+#define WIDGET_VBPM 0x00000400
+#define WIDGET_ERROR 0x00000200
+#define WIDGET_BARRIER 0x00000100
+
+/* WIDGET_LLP_CFG */
+#define WIDGET_LLP_MAXRETRY 0x03ff0000
+#define WIDGET_LLP_MAXRETRY_SHFT 16
+#define WIDGET_LLP_NULLTIMEOUT 0x0000fc00
+#define WIDGET_LLP_NULLTIMEOUT_SHFT 10
+#define WIDGET_LLP_MAXBURST 0x000003ff
+#define WIDGET_LLP_MAXBURST_SHFT 0
+
+/*
+ * according to the crosstalk spec, only 32-bits access to the widget
+ * configuration registers is allowed. some widgets may allow 64-bits
+ * access but software should not depend on it. registers beyond the
+ * widget target flush register are widget dependent thus will not be
+ * defined here
+ */
+#ifndef __ASSEMBLY__
+typedef u32 widgetreg_t;
+
+/* widget configuration registers */
+typedef volatile struct widget_cfg {
+ widgetreg_t w_pad_0; /* 0x00 */
+ widgetreg_t w_id; /* 0x04 */
+ widgetreg_t w_pad_1; /* 0x08 */
+ widgetreg_t w_status; /* 0x0c */
+ widgetreg_t w_pad_2; /* 0x10 */
+ widgetreg_t w_err_upper_addr; /* 0x14 */
+ widgetreg_t w_pad_3; /* 0x18 */
+ widgetreg_t w_err_lower_addr; /* 0x1c */
+ widgetreg_t w_pad_4; /* 0x20 */
+ widgetreg_t w_control; /* 0x24 */
+ widgetreg_t w_pad_5; /* 0x28 */
+ widgetreg_t w_req_timeout; /* 0x2c */
+ widgetreg_t w_pad_6; /* 0x30 */
+ widgetreg_t w_intdest_upper_addr; /* 0x34 */
+ widgetreg_t w_pad_7; /* 0x38 */
+ widgetreg_t w_intdest_lower_addr; /* 0x3c */
+ widgetreg_t w_pad_8; /* 0x40 */
+ widgetreg_t w_err_cmd_word; /* 0x44 */
+ widgetreg_t w_pad_9; /* 0x48 */
+ widgetreg_t w_llp_cfg; /* 0x4c */
+ widgetreg_t w_pad_10; /* 0x50 */
+ widgetreg_t w_tflush; /* 0x54 */
+} widget_cfg_t;
+
+typedef struct {
+ unsigned didn:4;
+ unsigned sidn:4;
+ unsigned pactyp:4;
+ unsigned tnum:5;
+ unsigned ct:1;
+ unsigned ds:2;
+ unsigned gbr:1;
+ unsigned vbpm:1;
+ unsigned error:1;
+ unsigned bo:1;
+ unsigned other:8;
+} w_err_cmd_word_f;
+
+typedef union {
+ widgetreg_t r;
+ w_err_cmd_word_f f;
+} w_err_cmd_word_u;
+
+typedef struct xwidget_info_s *xwidget_info_t;
+
+/*
+ * Crosstalk Widget Hardware Identification, as defined in the Crosstalk spec.
+ */
+typedef struct xwidget_hwid_s {
+ xwidget_part_num_t part_num;
+ xwidget_rev_num_t rev_num;
+ xwidget_mfg_num_t mfg_num;
+} *xwidget_hwid_t;
+
+
+/*
+ * Returns 1 if a driver that handles devices described by hwid1 is able
+ * to manage a device with hardwareid hwid2. NOTE: We don't check rev
+ * numbers at all.
+ */
+#define XWIDGET_HARDWARE_ID_MATCH(hwid1, hwid2) \
+ (((hwid1)->part_num == (hwid2)->part_num) && \
+ (((hwid1)->mfg_num == XWIDGET_MFG_NUM_NONE) || \
+ ((hwid2)->mfg_num == XWIDGET_MFG_NUM_NONE) || \
+ ((hwid1)->mfg_num == (hwid2)->mfg_num)))
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_XTALK_XWIDGET_H */
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 706f9397479..d9da7112aaf 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -6,10 +6,11 @@ extra-y := head.o init_task.o vmlinux.lds
obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \
ptrace.o reset.o setup.o signal.o syscall.o \
- time.o topology.o traps.o unaligned.o
+ time.o topology.o traps.o unaligned.o watch.o
obj-$(CONFIG_CEVT_BCM1480) += cevt-bcm1480.o
obj-$(CONFIG_CEVT_R4K) += cevt-r4k.o
+obj-$(CONFIG_MIPS_MT_SMTC) += cevt-smtc.o
obj-$(CONFIG_CEVT_DS1287) += cevt-ds1287.o
obj-$(CONFIG_CEVT_GT641XX) += cevt-gt641xx.o
obj-$(CONFIG_CEVT_SB1250) += cevt-sb1250.o
diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
index 24a2d907aa0..4a4c59f2737 100644
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@@ -12,6 +12,14 @@
#include <asm/smtc_ipi.h>
#include <asm/time.h>
+#include <asm/cevt-r4k.h>
+
+/*
+ * The SMTC Kernel for the 34K, 1004K, et. al. replaces several
+ * of these routines with SMTC-specific variants.
+ */
+
+#ifndef CONFIG_MIPS_MT_SMTC
static int mips_next_event(unsigned long delta,
struct clock_event_device *evt)
@@ -19,60 +27,27 @@ static int mips_next_event(unsigned long delta,
unsigned int cnt;
int res;
-#ifdef CONFIG_MIPS_MT_SMTC
- {
- unsigned long flags, vpflags;
- local_irq_save(flags);
- vpflags = dvpe();
-#endif
cnt = read_c0_count();
cnt += delta;
write_c0_compare(cnt);
res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
-#ifdef CONFIG_MIPS_MT_SMTC
- evpe(vpflags);
- local_irq_restore(flags);
- }
-#endif
return res;
}
-static void mips_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+void mips_set_clock_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
{
/* Nothing to do ... */
}
-static DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
-static int cp0_timer_irq_installed;
+DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
+int cp0_timer_irq_installed;
-/*
- * Timer ack for an R4k-compatible timer of a known frequency.
- */
-static void c0_timer_ack(void)
-{
- write_c0_compare(read_c0_compare());
-}
+#ifndef CONFIG_MIPS_MT_SMTC
-/*
- * Possibly handle a performance counter interrupt.
- * Return true if the timer interrupt should not be checked
- */
-static inline int handle_perf_irq(int r2)
-{
- /*
- * The performance counter overflow interrupt may be shared with the
- * timer interrupt (cp0_perfcount_irq < 0). If it is and a
- * performance counter has overflowed (perf_irq() == IRQ_HANDLED)
- * and we can't reliably determine if a counter interrupt has also
- * happened (!r2) then don't check for a timer interrupt.
- */
- return (cp0_perfcount_irq < 0) &&
- perf_irq() == IRQ_HANDLED &&
- !r2;
-}
-
-static irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
+irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
{
const int r2 = cpu_has_mips_r2;
struct clock_event_device *cd;
@@ -93,12 +68,8 @@ static irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
* interrupt. Being the paranoiacs we are we check anyway.
*/
if (!r2 || (read_c0_cause() & (1 << 30))) {
- c0_timer_ack();
-#ifdef CONFIG_MIPS_MT_SMTC
- if (cpu_data[cpu].vpe_id)
- goto out;
- cpu = 0;
-#endif
+ /* Clear Count/Compare Interrupt */
+ write_c0_compare(read_c0_compare());
cd = &per_cpu(mips_clockevent_device, cpu);
cd->event_handler(cd);
}
@@ -107,65 +78,16 @@ out:
return IRQ_HANDLED;
}
-static struct irqaction c0_compare_irqaction = {
+#endif /* Not CONFIG_MIPS_MT_SMTC */
+
+struct irqaction c0_compare_irqaction = {
.handler = c0_compare_interrupt,
-#ifdef CONFIG_MIPS_MT_SMTC
- .flags = IRQF_DISABLED,
-#else
.flags = IRQF_DISABLED | IRQF_PERCPU,
-#endif
.name = "timer",
};
-#ifdef CONFIG_MIPS_MT_SMTC
-DEFINE_PER_CPU(struct clock_event_device, smtc_dummy_clockevent_device);
-
-static void smtc_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
-}
-
-static void mips_broadcast(cpumask_t mask)
-{
- unsigned int cpu;
-
- for_each_cpu_mask(cpu, mask)
- smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0);
-}
-
-static void setup_smtc_dummy_clockevent_device(void)
-{
- //uint64_t mips_freq = mips_hpt_^frequency;
- unsigned int cpu = smp_processor_id();
- struct clock_event_device *cd;
- cd = &per_cpu(smtc_dummy_clockevent_device, cpu);
-
- cd->name = "SMTC";
- cd->features = CLOCK_EVT_FEAT_DUMMY;
-
- /* Calculate the min / max delta */
- cd->mult = 0; //div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32);
- cd->shift = 0; //32;
- cd->max_delta_ns = 0; //clockevent_delta2ns(0x7fffffff, cd);
- cd->min_delta_ns = 0; //clockevent_delta2ns(0x30, cd);
-
- cd->rating = 200;
- cd->irq = 17; //-1;
-// if (cpu)
-// cd->cpumask = CPU_MASK_ALL; // cpumask_of_cpu(cpu);
-// else
- cd->cpumask = cpumask_of_cpu(cpu);
-
- cd->set_mode = smtc_set_mode;
-
- cd->broadcast = mips_broadcast;
-
- clockevents_register_device(cd);
-}
-#endif
-
-static void mips_event_handler(struct clock_event_device *dev)
+void mips_event_handler(struct clock_event_device *dev)
{
}
@@ -177,7 +99,23 @@ static int c0_compare_int_pending(void)
return (read_c0_cause() >> cp0_compare_irq) & 0x100;
}
-static int c0_compare_int_usable(void)
+/*
+ * Compare interrupt can be routed and latched outside the core,
+ * so a single execution hazard barrier may not be enough to give
+ * it time to clear as seen in the Cause register. 4 time the
+ * pipeline depth seems reasonably conservative, and empirically
+ * works better in configurations with high CPU/bus clock ratios.
+ */
+
+#define compare_change_hazard() \
+ do { \
+ irq_disable_hazard(); \
+ irq_disable_hazard(); \
+ irq_disable_hazard(); \
+ irq_disable_hazard(); \
+ } while (0)
+
+int c0_compare_int_usable(void)
{
unsigned int delta;
unsigned int cnt;
@@ -187,7 +125,7 @@ static int c0_compare_int_usable(void)
*/
if (c0_compare_int_pending()) {
write_c0_compare(read_c0_count());
- irq_disable_hazard();
+ compare_change_hazard();
if (c0_compare_int_pending())
return 0;
}
@@ -196,7 +134,7 @@ static int c0_compare_int_usable(void)
cnt = read_c0_count();
cnt += delta;
write_c0_compare(cnt);
- irq_disable_hazard();
+ compare_change_hazard();
if ((int)(read_c0_count() - cnt) < 0)
break;
/* increase delta if the timer was already expired */
@@ -205,11 +143,12 @@ static int c0_compare_int_usable(void)
while ((int)(read_c0_count() - cnt) <= 0)
; /* Wait for expiry */
+ compare_change_hazard();
if (!c0_compare_int_pending())
return 0;
write_c0_compare(read_c0_count());
- irq_disable_hazard();
+ compare_change_hazard();
if (c0_compare_int_pending())
return 0;
@@ -219,6 +158,8 @@ static int c0_compare_int_usable(void)
return 1;
}
+#ifndef CONFIG_MIPS_MT_SMTC
+
int __cpuinit mips_clockevent_init(void)
{
uint64_t mips_freq = mips_hpt_frequency;
@@ -229,17 +170,6 @@ int __cpuinit mips_clockevent_init(void)
if (!cpu_has_counter || !mips_hpt_frequency)
return -ENXIO;
-#ifdef CONFIG_MIPS_MT_SMTC
- setup_smtc_dummy_clockevent_device();
-
- /*
- * On SMTC we only register VPE0's compare interrupt as clockevent
- * device.
- */
- if (cpu)
- return 0;
-#endif
-
if (!c0_compare_int_usable())
return -ENXIO;
@@ -265,13 +195,9 @@ int __cpuinit mips_clockevent_init(void)
cd->rating = 300;
cd->irq = irq;
-#ifdef CONFIG_MIPS_MT_SMTC
- cd->cpumask = CPU_MASK_ALL;
-#else
cd->cpumask = cpumask_of_cpu(cpu);
-#endif
cd->set_next_event = mips_next_event;
- cd->set_mode = mips_set_mode;
+ cd->set_mode = mips_set_clock_mode;
cd->event_handler = mips_event_handler;
clockevents_register_device(cd);
@@ -281,12 +207,9 @@ int __cpuinit mips_clockevent_init(void)
cp0_timer_irq_installed = 1;
-#ifdef CONFIG_MIPS_MT_SMTC
-#define CPUCTR_IMASKBIT (0x100 << cp0_compare_irq)
- setup_irq_smtc(irq, &c0_compare_irqaction, CPUCTR_IMASKBIT);
-#else
setup_irq(irq, &c0_compare_irqaction);
-#endif
return 0;
}
+
+#endif /* Not CONFIG_MIPS_MT_SMTC */
diff --git a/arch/mips/kernel/cevt-smtc.c b/arch/mips/kernel/cevt-smtc.c
new file mode 100644
index 00000000000..5162fe4b595
--- /dev/null
+++ b/arch/mips/kernel/cevt-smtc.c
@@ -0,0 +1,321 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 MIPS Technologies, Inc.
+ * Copyright (C) 2007 Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) 2008 Kevin D. Kissell, Paralogos sarl
+ */
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/percpu.h>
+
+#include <asm/smtc_ipi.h>
+#include <asm/time.h>
+#include <asm/cevt-r4k.h>
+
+/*
+ * Variant clock event timer support for SMTC on MIPS 34K, 1004K
+ * or other MIPS MT cores.
+ *
+ * Notes on SMTC Support:
+ *
+ * SMTC has multiple microthread TCs pretending to be Linux CPUs.
+ * But there's only one Count/Compare pair per VPE, and Compare
+ * interrupts are taken opportunisitically by available TCs
+ * bound to the VPE with the Count register. The new timer
+ * framework provides for global broadcasts, but we really
+ * want VPE-level multicasts for best behavior. So instead
+ * of invoking the high-level clock-event broadcast code,
+ * this version of SMTC support uses the historical SMTC
+ * multicast mechanisms "under the hood", appearing to the
+ * generic clock layer as if the interrupts are per-CPU.
+ *
+ * The approach taken here is to maintain a set of NR_CPUS
+ * virtual timers, and track which "CPU" needs to be alerted
+ * at each event.
+ *
+ * It's unlikely that we'll see a MIPS MT core with more than
+ * 2 VPEs, but we *know* that we won't need to handle more
+ * VPEs than we have "CPUs". So NCPUs arrays of NCPUs elements
+ * is always going to be overkill, but always going to be enough.
+ */
+
+unsigned long smtc_nexttime[NR_CPUS][NR_CPUS];
+static int smtc_nextinvpe[NR_CPUS];
+
+/*
+ * Timestamps stored are absolute values to be programmed
+ * into Count register. Valid timestamps will never be zero.
+ * If a Zero Count value is actually calculated, it is converted
+ * to be a 1, which will introduce 1 or two CPU cycles of error
+ * roughly once every four billion events, which at 1000 HZ means
+ * about once every 50 days. If that's actually a problem, one
+ * could alternate squashing 0 to 1 and to -1.
+ */
+
+#define MAKEVALID(x) (((x) == 0L) ? 1L : (x))
+#define ISVALID(x) ((x) != 0L)
+
+/*
+ * Time comparison is subtle, as it's really truncated
+ * modular arithmetic.
+ */
+
+#define IS_SOONER(a, b, reference) \
+ (((a) - (unsigned long)(reference)) < ((b) - (unsigned long)(reference)))
+
+/*
+ * CATCHUP_INCREMENT, used when the function falls behind the counter.
+ * Could be an increasing function instead of a constant;
+ */
+
+#define CATCHUP_INCREMENT 64
+
+static int mips_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+{
+ unsigned long flags;
+ unsigned int mtflags;
+ unsigned long timestamp, reference, previous;
+ unsigned long nextcomp = 0L;
+ int vpe = current_cpu_data.vpe_id;
+ int cpu = smp_processor_id();
+ local_irq_save(flags);
+ mtflags = dmt();
+
+ /*
+ * Maintain the per-TC virtual timer
+ * and program the per-VPE shared Count register
+ * as appropriate here...
+ */
+ reference = (unsigned long)read_c0_count();
+ timestamp = MAKEVALID(reference + delta);
+ /*
+ * To really model the clock, we have to catch the case
+ * where the current next-in-VPE timestamp is the old
+ * timestamp for the calling CPE, but the new value is
+ * in fact later. In that case, we have to do a full
+ * scan and discover the new next-in-VPE CPU id and
+ * timestamp.
+ */
+ previous = smtc_nexttime[vpe][cpu];
+ if (cpu == smtc_nextinvpe[vpe] && ISVALID(previous)
+ && IS_SOONER(previous, timestamp, reference)) {
+ int i;
+ int soonest = cpu;
+
+ /*
+ * Update timestamp array here, so that new
+ * value gets considered along with those of
+ * other virtual CPUs on the VPE.
+ */
+ smtc_nexttime[vpe][cpu] = timestamp;
+ for_each_online_cpu(i) {
+ if (ISVALID(smtc_nexttime[vpe][i])
+ && IS_SOONER(smtc_nexttime[vpe][i],
+ smtc_nexttime[vpe][soonest], reference)) {
+ soonest = i;
+ }
+ }
+ smtc_nextinvpe[vpe] = soonest;
+ nextcomp = smtc_nexttime[vpe][soonest];
+ /*
+ * Otherwise, we don't have to process the whole array rank,
+ * we just have to see if the event horizon has gotten closer.
+ */
+ } else {
+ if (!ISVALID(smtc_nexttime[vpe][smtc_nextinvpe[vpe]]) ||
+ IS_SOONER(timestamp,
+ smtc_nexttime[vpe][smtc_nextinvpe[vpe]], reference)) {
+ smtc_nextinvpe[vpe] = cpu;
+ nextcomp = timestamp;
+ }
+ /*
+ * Since next-in-VPE may me the same as the executing
+ * virtual CPU, we update the array *after* checking
+ * its value.
+ */
+ smtc_nexttime[vpe][cpu] = timestamp;
+ }
+
+ /*
+ * It may be that, in fact, we don't need to update Compare,
+ * but if we do, we want to make sure we didn't fall into
+ * a crack just behind Count.
+ */
+ if (ISVALID(nextcomp)) {
+ write_c0_compare(nextcomp);
+ ehb();
+ /*
+ * We never return an error, we just make sure
+ * that we trigger the handlers as quickly as
+ * we can if we fell behind.
+ */
+ while ((nextcomp - (unsigned long)read_c0_count())
+ > (unsigned long)LONG_MAX) {
+ nextcomp += CATCHUP_INCREMENT;
+ write_c0_compare(nextcomp);
+ ehb();
+ }
+ }
+ emt(mtflags);
+ local_irq_restore(flags);
+ return 0;
+}
+
+
+void smtc_distribute_timer(int vpe)
+{
+ unsigned long flags;
+ unsigned int mtflags;
+ int cpu;
+ struct clock_event_device *cd;
+ unsigned long nextstamp = 0L;
+ unsigned long reference;
+
+
+repeat:
+ for_each_online_cpu(cpu) {
+ /*
+ * Find virtual CPUs within the current VPE who have
+ * unserviced timer requests whose time is now past.
+ */
+ local_irq_save(flags);
+ mtflags = dmt();
+ if (cpu_data[cpu].vpe_id == vpe &&
+ ISVALID(smtc_nexttime[vpe][cpu])) {
+ reference = (unsigned long)read_c0_count();
+ if ((smtc_nexttime[vpe][cpu] - reference)
+ > (unsigned long)LONG_MAX) {
+ smtc_nexttime[vpe][cpu] = 0L;
+ emt(mtflags);
+ local_irq_restore(flags);
+ /*
+ * We don't send IPIs to ourself.
+ */
+ if (cpu != smp_processor_id()) {
+ smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0);
+ } else {
+ cd = &per_cpu(mips_clockevent_device, cpu);
+ cd->event_handler(cd);
+ }
+ } else {
+ /* Local to VPE but Valid Time not yet reached. */
+ if (!ISVALID(nextstamp) ||
+ IS_SOONER(smtc_nexttime[vpe][cpu], nextstamp,
+ reference)) {
+ smtc_nextinvpe[vpe] = cpu;
+ nextstamp = smtc_nexttime[vpe][cpu];
+ }
+ emt(mtflags);
+ local_irq_restore(flags);
+ }
+ } else {
+ emt(mtflags);
+ local_irq_restore(flags);
+
+ }
+ }
+ /* Reprogram for interrupt at next soonest timestamp for VPE */
+ if (ISVALID(nextstamp)) {
+ write_c0_compare(nextstamp);
+ ehb();
+ if ((nextstamp - (unsigned long)read_c0_count())
+ > (unsigned long)LONG_MAX)
+ goto repeat;
+ }
+}
+
+
+irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
+{
+ int cpu = smp_processor_id();
+
+ /* If we're running SMTC, we've got MIPS MT and therefore MIPS32R2 */
+ handle_perf_irq(1);
+
+ if (read_c0_cause() & (1 << 30)) {
+ /* Clear Count/Compare Interrupt */
+ write_c0_compare(read_c0_compare());
+ smtc_distribute_timer(cpu_data[cpu].vpe_id);
+ }
+ return IRQ_HANDLED;
+}
+
+
+int __cpuinit mips_clockevent_init(void)
+{
+ uint64_t mips_freq = mips_hpt_frequency;
+ unsigned int cpu = smp_processor_id();
+ struct clock_event_device *cd;
+ unsigned int irq;
+ int i;
+ int j;
+
+ if (!cpu_has_counter || !mips_hpt_frequency)
+ return -ENXIO;
+ if (cpu == 0) {
+ for (i = 0; i < num_possible_cpus(); i++) {
+ smtc_nextinvpe[i] = 0;
+ for (j = 0; j < num_possible_cpus(); j++)
+ smtc_nexttime[i][j] = 0L;
+ }
+ /*
+ * SMTC also can't have the usablility test
+ * run by secondary TCs once Compare is in use.
+ */
+ if (!c0_compare_int_usable())
+ return -ENXIO;
+ }
+
+ /*
+ * With vectored interrupts things are getting platform specific.
+ * get_c0_compare_int is a hook to allow a platform to return the
+ * interrupt number of it's liking.
+ */
+ irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
+ if (get_c0_compare_int)
+ irq = get_c0_compare_int();
+
+ cd = &per_cpu(mips_clockevent_device, cpu);
+
+ cd->name = "MIPS";
+ cd->features = CLOCK_EVT_FEAT_ONESHOT;
+
+ /* Calculate the min / max delta */
+ cd->mult = div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32);
+ cd->shift = 32;
+ cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd);
+ cd->min_delta_ns = clockevent_delta2ns(0x300, cd);
+
+ cd->rating = 300;
+ cd->irq = irq;
+ cd->cpumask = cpumask_of_cpu(cpu);
+ cd->set_next_event = mips_next_event;
+ cd->set_mode = mips_set_clock_mode;
+ cd->event_handler = mips_event_handler;
+
+ clockevents_register_device(cd);
+
+ /*
+ * On SMTC we only want to do the data structure
+ * initialization and IRQ setup once.
+ */
+ if (cpu)
+ return 0;
+ /*
+ * And we need the hwmask associated with the c0_compare
+ * vector to be initialized.
+ */
+ irq_hwmask[irq] = (0x100 << cp0_compare_irq);
+ if (cp0_timer_irq_installed)
+ return 0;
+
+ cp0_timer_irq_installed = 1;
+
+ setup_irq(irq, &c0_compare_irqaction);
+
+ return 0;
+}
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 11c92dc5379..0cf15457eca 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -21,6 +21,7 @@
#include <asm/fpu.h>
#include <asm/mipsregs.h>
#include <asm/system.h>
+#include <asm/watch.h>
/*
* Not all of the MIPS CPUs have the "wait" instruction available. Moreover,
@@ -54,14 +55,18 @@ extern void r4k_wait(void);
* interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes
* using this version a gamble.
*/
-static void r4k_wait_irqoff(void)
+void r4k_wait_irqoff(void)
{
local_irq_disable();
if (!need_resched())
- __asm__(" .set mips3 \n"
+ __asm__(" .set push \n"
+ " .set mips3 \n"
" wait \n"
- " .set mips0 \n");
+ " .set pop \n");
local_irq_enable();
+ __asm__(" .globl __pastwait \n"
+ "__pastwait: \n");
+ return;
}
/*
@@ -673,6 +678,7 @@ static inline void spram_config(void) {}
static inline void cpu_probe_mips(struct cpuinfo_mips *c)
{
decode_configs(c);
+ mips_probe_watch_registers(c);
switch (c->processor_id & 0xff00) {
case PRID_IMP_4KC:
c->cputype = CPU_4KC;
diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S
index e29598ae939..ffa331029e0 100644
--- a/arch/mips/kernel/entry.S
+++ b/arch/mips/kernel/entry.S
@@ -79,11 +79,6 @@ FEXPORT(syscall_exit)
FEXPORT(restore_all) # restore full frame
#ifdef CONFIG_MIPS_MT_SMTC
-/* Detect and execute deferred IPI "interrupts" */
- LONG_L s0, TI_REGS($28)
- LONG_S sp, TI_REGS($28)
- jal deferred_smtc_ipi
- LONG_S s0, TI_REGS($28)
#ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP
/* Re-arm any temporarily masked interrupts not explicitly "acked" */
mfc0 v0, CP0_TCSTATUS
@@ -112,6 +107,11 @@ FEXPORT(restore_all) # restore full frame
xor t0, t0, t3
mtc0 t0, CP0_TCCONTEXT
#endif /* CONFIG_MIPS_MT_SMTC_IM_BACKSTOP */
+/* Detect and execute deferred IPI "interrupts" */
+ LONG_L s0, TI_REGS($28)
+ LONG_S sp, TI_REGS($28)
+ jal deferred_smtc_ipi
+ LONG_S s0, TI_REGS($28)
#endif /* CONFIG_MIPS_MT_SMTC */
.set noat
RESTORE_TEMP
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index f886dd7f708..757d48f0d80 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -282,8 +282,8 @@ NESTED(except_vec_vi_handler, 0, sp)
and t0, a0, t1
#ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP
mfc0 t2, CP0_TCCONTEXT
- or t0, t0, t2
- mtc0 t0, CP0_TCCONTEXT
+ or t2, t0, t2
+ mtc0 t2, CP0_TCCONTEXT
#endif /* CONFIG_MIPS_MT_SMTC_IM_BACKSTOP */
xor t1, t1, t0
mtc0 t1, CP0_STATUS
@@ -453,7 +453,11 @@ NESTED(nmi_handler, PT_SIZE, sp)
BUILD_HANDLER tr tr sti silent /* #13 */
BUILD_HANDLER fpe fpe fpe silent /* #15 */
BUILD_HANDLER mdmx mdmx sti silent /* #22 */
+#ifdef CONFIG_HARDWARE_WATCHPOINTS
+ BUILD_HANDLER watch watch sti silent /* #23 */
+#else
BUILD_HANDLER watch watch sti verbose /* #23 */
+#endif
BUILD_HANDLER mcheck mcheck cli verbose /* #24 */
BUILD_HANDLER mt mt sti silent /* #25 */
BUILD_HANDLER dsp dsp sti silent /* #26 */
diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
index 361364501d3..492a0a8d70f 100644
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
@@ -22,6 +22,7 @@
#include <asm/irqflags.h>
#include <asm/regdef.h>
#include <asm/page.h>
+#include <asm/pgtable-bits.h>
#include <asm/mipsregs.h>
#include <asm/stackframe.h>
diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c
index 8f6d58ede33..6e152c80cd4 100644
--- a/arch/mips/kernel/kgdb.c
+++ b/arch/mips/kernel/kgdb.c
@@ -236,8 +236,7 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code,
atomic_set(&kgdb_cpu_doing_single_step, -1);
if (remcom_in_buffer[0] == 's')
- if (kgdb_contthread)
- atomic_set(&kgdb_cpu_doing_single_step, cpu);
+ atomic_set(&kgdb_cpu_doing_single_step, cpu);
return 0;
}
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index 2fefb14414b..aa2c55e3b55 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -63,41 +63,6 @@
#define merge_64(r1, r2) ((((r2) & 0xffffffffUL) << 32) + ((r1) & 0xffffffffUL))
#endif
-/*
- * Revalidate the inode. This is required for proper NFS attribute caching.
- */
-
-int cp_compat_stat(struct kstat *stat, struct compat_stat __user *statbuf)
-{
- struct compat_stat tmp;
-
- if (!new_valid_dev(stat->dev) || !new_valid_dev(stat->rdev))
- return -EOVERFLOW;
-
- memset(&tmp, 0, sizeof(tmp));
- tmp.st_dev = new_encode_dev(stat->dev);
- tmp.st_ino = stat->ino;
- if (sizeof(tmp.st_ino) < sizeof(stat->ino) && tmp.st_ino != stat->ino)
- return -EOVERFLOW;
- tmp.st_mode = stat->mode;
- tmp.st_nlink = stat->nlink;
- SET_UID(tmp.st_uid, stat->uid);
- SET_GID(tmp.st_gid, stat->gid);
- tmp.st_rdev = new_encode_dev(stat->rdev);
- tmp.st_size = stat->size;
- tmp.st_atime = stat->atime.tv_sec;
- tmp.st_mtime = stat->mtime.tv_sec;
- tmp.st_ctime = stat->ctime.tv_sec;
-#ifdef STAT_HAVE_NSEC
- tmp.st_atime_nsec = stat->atime.tv_nsec;
- tmp.st_mtime_nsec = stat->mtime.tv_nsec;
- tmp.st_ctime_nsec = stat->ctime.tv_nsec;
-#endif
- tmp.st_blocks = stat->blocks;
- tmp.st_blksize = stat->blksize;
- return copy_to_user(statbuf, &tmp, sizeof(tmp)) ? -EFAULT : 0;
-}
-
asmlinkage unsigned long
sys32_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
unsigned long flags, unsigned long fd, unsigned long pgoff)
@@ -168,72 +133,6 @@ asmlinkage long sys32_ftruncate64(unsigned int fd, unsigned long __dummy,
return sys_ftruncate(fd, merge_64(a2, a3));
}
-static inline long
-get_tv32(struct timeval *o, struct compat_timeval __user *i)
-{
- return (!access_ok(VERIFY_READ, i, sizeof(*i)) ||
- (__get_user(o->tv_sec, &i->tv_sec) |
- __get_user(o->tv_usec, &i->tv_usec)));
-}
-
-static inline long
-put_tv32(struct compat_timeval __user *o, struct timeval *i)
-{
- return (!access_ok(VERIFY_WRITE, o, sizeof(*o)) ||
- (__put_user(i->tv_sec, &o->tv_sec) |
- __put_user(i->tv_usec, &o->tv_usec)));
-}
-
-extern struct timezone sys_tz;
-
-asmlinkage int
-sys32_gettimeofday(struct compat_timeval __user *tv, struct timezone __user *tz)
-{
- if (tv) {
- struct timeval ktv;
- do_gettimeofday(&ktv);
- if (put_tv32(tv, &ktv))
- return -EFAULT;
- }
- if (tz) {
- if (copy_to_user(tz, &sys_tz, sizeof(sys_tz)))
- return -EFAULT;
- }
- return 0;
-}
-
-static inline long get_ts32(struct timespec *o, struct compat_timeval __user *i)
-{
- long usec;
-
- if (!access_ok(VERIFY_READ, i, sizeof(*i)))
- return -EFAULT;
- if (__get_user(o->tv_sec, &i->tv_sec))
- return -EFAULT;
- if (__get_user(usec, &i->tv_usec))
- return -EFAULT;
- o->tv_nsec = usec * 1000;
- return 0;
-}
-
-asmlinkage int
-sys32_settimeofday(struct compat_timeval __user *tv, struct timezone __user *tz)
-{
- struct timespec kts;
- struct timezone ktz;
-
- if (tv) {
- if (get_ts32(&kts, tv))
- return -EFAULT;
- }
- if (tz) {
- if (copy_from_user(&ktz, tz, sizeof(ktz)))
- return -EFAULT;
- }
-
- return do_sys_settimeofday(tv ? &kts : NULL, tz ? &ktz : NULL);
-}
-
asmlinkage int sys32_llseek(unsigned int fd, unsigned int offset_high,
unsigned int offset_low, loff_t __user * result,
unsigned int origin)
diff --git a/arch/mips/kernel/mips-mt-fpaff.c b/arch/mips/kernel/mips-mt-fpaff.c
index df4d3f2f740..dc9eb72ed9d 100644
--- a/arch/mips/kernel/mips-mt-fpaff.c
+++ b/arch/mips/kernel/mips-mt-fpaff.c
@@ -159,7 +159,7 @@ __setup("fpaff=", fpaff_thresh);
/*
* FPU Use Factor empirically derived from experiments on 34K
*/
-#define FPUSEFACTOR 333
+#define FPUSEFACTOR 2000
static __init int mt_fp_affinity_init(void)
{
diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
index 36f06539824..26760cad8b6 100644
--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@@ -23,6 +23,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
unsigned int version = cpu_data[n].processor_id;
unsigned int fp_vers = cpu_data[n].fpu_id;
char fmt [64];
+ int i;
#ifdef CONFIG_SMP
if (!cpu_isset(n, cpu_online_map))
@@ -38,7 +39,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
seq_printf(m, "processor\t\t: %ld\n", n);
sprintf(fmt, "cpu model\t\t: %%s V%%d.%%d%s\n",
cpu_data[n].options & MIPS_CPU_FPU ? " FPU V%d.%d" : "");
- seq_printf(m, fmt, __cpu_name[smp_processor_id()],
+ seq_printf(m, fmt, __cpu_name[n],
(version >> 4) & 0x0f, version & 0x0f,
(fp_vers >> 4) & 0x0f, fp_vers & 0x0f);
seq_printf(m, "BogoMIPS\t\t: %lu.%02lu\n",
@@ -50,8 +51,16 @@ static int show_cpuinfo(struct seq_file *m, void *v)
seq_printf(m, "tlb_entries\t\t: %d\n", cpu_data[n].tlbsize);
seq_printf(m, "extra interrupt vector\t: %s\n",
cpu_has_divec ? "yes" : "no");
- seq_printf(m, "hardware watchpoint\t: %s\n",
- cpu_has_watch ? "yes" : "no");
+ seq_printf(m, "hardware watchpoint\t: %s",
+ cpu_has_watch ? "yes, " : "no\n");
+ if (cpu_has_watch) {
+ seq_printf(m, "count: %d, address/irw mask: [",
+ cpu_data[n].watch_reg_count);
+ for (i = 0; i < cpu_data[n].watch_reg_count; i++)
+ seq_printf(m, "%s0x%04x", i ? ", " : "" ,
+ cpu_data[n].watch_reg_masks[i]);
+ seq_printf(m, "]\n");
+ }
seq_printf(m, "ASEs implemented\t:%s%s%s%s%s%s\n",
cpu_has_mips16 ? " mips16" : "",
cpu_has_mdmx ? " mdmx" : "",
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index ce7684335a4..ca2e4026ad2 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -22,7 +22,6 @@
#include <linux/personality.h>
#include <linux/sys.h>
#include <linux/user.h>
-#include <linux/a.out.h>
#include <linux/init.h>
#include <linux/completion.h>
#include <linux/kallsyms.h>
@@ -55,7 +54,7 @@ void __noreturn cpu_idle(void)
while (1) {
tick_nohz_stop_sched_tick(1);
while (!need_resched()) {
-#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
+#ifdef CONFIG_MIPS_MT_SMTC
extern void smtc_idle_loop_hook(void);
smtc_idle_loop_hook();
@@ -145,19 +144,18 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
*/
p->thread.cp0_status = read_c0_status() & ~(ST0_CU2|ST0_CU1);
childregs->cp0_status &= ~(ST0_CU2|ST0_CU1);
+
+#ifdef CONFIG_MIPS_MT_SMTC
+ /*
+ * SMTC restores TCStatus after Status, and the CU bits
+ * are aliased there.
+ */
+ childregs->cp0_tcstatus &= ~(ST0_CU2|ST0_CU1);
+#endif
clear_tsk_thread_flag(p, TIF_USEDFPU);
#ifdef CONFIG_MIPS_MT_FPAFF
clear_tsk_thread_flag(p, TIF_FPUBOUND);
-
- /*
- * FPU affinity support is cleaner if we track the
- * user-visible CPU affinity from the very beginning.
- * The generic cpus_allowed mask will already have
- * been copied from the parent before copy_thread
- * is invoked.
- */
- p->thread.user_cpus_allowed = p->cpus_allowed;
#endif /* CONFIG_MIPS_MT_FPAFF */
if (clone_flags & CLONE_SETTLS)
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index 35234b92b9a..054861ccb4d 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -46,7 +46,8 @@
*/
void ptrace_disable(struct task_struct *child)
{
- /* Nothing to do.. */
+ /* Don't load the watchpoint registers for the ex-child. */
+ clear_tsk_thread_flag(child, TIF_LOAD_WATCH);
}
/*
@@ -167,6 +168,93 @@ int ptrace_setfpregs(struct task_struct *child, __u32 __user *data)
return 0;
}
+int ptrace_get_watch_regs(struct task_struct *child,
+ struct pt_watch_regs __user *addr)
+{
+ enum pt_watch_style style;
+ int i;
+
+ if (!cpu_has_watch || current_cpu_data.watch_reg_use_cnt == 0)
+ return -EIO;
+ if (!access_ok(VERIFY_WRITE, addr, sizeof(struct pt_watch_regs)))
+ return -EIO;
+
+#ifdef CONFIG_32BIT
+ style = pt_watch_style_mips32;
+#define WATCH_STYLE mips32
+#else
+ style = pt_watch_style_mips64;
+#define WATCH_STYLE mips64
+#endif
+
+ __put_user(style, &addr->style);
+ __put_user(current_cpu_data.watch_reg_use_cnt,
+ &addr->WATCH_STYLE.num_valid);
+ for (i = 0; i < current_cpu_data.watch_reg_use_cnt; i++) {
+ __put_user(child->thread.watch.mips3264.watchlo[i],
+ &addr->WATCH_STYLE.watchlo[i]);
+ __put_user(child->thread.watch.mips3264.watchhi[i] & 0xfff,
+ &addr->WATCH_STYLE.watchhi[i]);
+ __put_user(current_cpu_data.watch_reg_masks[i],
+ &addr->WATCH_STYLE.watch_masks[i]);
+ }
+ for (; i < 8; i++) {
+ __put_user(0, &addr->WATCH_STYLE.watchlo[i]);
+ __put_user(0, &addr->WATCH_STYLE.watchhi[i]);
+ __put_user(0, &addr->WATCH_STYLE.watch_masks[i]);
+ }
+
+ return 0;
+}
+
+int ptrace_set_watch_regs(struct task_struct *child,
+ struct pt_watch_regs __user *addr)
+{
+ int i;
+ int watch_active = 0;
+ unsigned long lt[NUM_WATCH_REGS];
+ u16 ht[NUM_WATCH_REGS];
+
+ if (!cpu_has_watch || current_cpu_data.watch_reg_use_cnt == 0)
+ return -EIO;
+ if (!access_ok(VERIFY_READ, addr, sizeof(struct pt_watch_regs)))
+ return -EIO;
+ /* Check the values. */
+ for (i = 0; i < current_cpu_data.watch_reg_use_cnt; i++) {
+ __get_user(lt[i], &addr->WATCH_STYLE.watchlo[i]);
+#ifdef CONFIG_32BIT
+ if (lt[i] & __UA_LIMIT)
+ return -EINVAL;
+#else
+ if (test_tsk_thread_flag(child, TIF_32BIT_ADDR)) {
+ if (lt[i] & 0xffffffff80000000UL)
+ return -EINVAL;
+ } else {
+ if (lt[i] & __UA_LIMIT)
+ return -EINVAL;
+ }
+#endif
+ __get_user(ht[i], &addr->WATCH_STYLE.watchhi[i]);
+ if (ht[i] & ~0xff8)
+ return -EINVAL;
+ }
+ /* Install them. */
+ for (i = 0; i < current_cpu_data.watch_reg_use_cnt; i++) {
+ if (lt[i] & 7)
+ watch_active = 1;
+ child->thread.watch.mips3264.watchlo[i] = lt[i];
+ /* Set the G bit. */
+ child->thread.watch.mips3264.watchhi[i] = ht[i];
+ }
+
+ if (watch_active)
+ set_tsk_thread_flag(child, TIF_LOAD_WATCH);
+ else
+ clear_tsk_thread_flag(child, TIF_LOAD_WATCH);
+
+ return 0;
+}
+
long arch_ptrace(struct task_struct *child, long request, long addr, long data)
{
int ret;
@@ -238,7 +326,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
case FPC_EIR: { /* implementation / version register */
unsigned int flags;
#ifdef CONFIG_MIPS_MT_SMTC
- unsigned int irqflags;
+ unsigned long irqflags;
unsigned int mtflags;
#endif /* CONFIG_MIPS_MT_SMTC */
@@ -440,6 +528,16 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
(unsigned long __user *) data);
break;
+ case PTRACE_GET_WATCH_REGS:
+ ret = ptrace_get_watch_regs(child,
+ (struct pt_watch_regs __user *) addr);
+ break;
+
+ case PTRACE_SET_WATCH_REGS:
+ ret = ptrace_set_watch_regs(child,
+ (struct pt_watch_regs __user *) addr);
+ break;
+
default:
ret = ptrace_request(child, request, addr, data);
break;
diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c
index 76818be6ba7..1ca34104e59 100644
--- a/arch/mips/kernel/ptrace32.c
+++ b/arch/mips/kernel/ptrace32.c
@@ -15,6 +15,7 @@
* binaries.
*/
#include <linux/compiler.h>
+#include <linux/compat.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/mm.h>
@@ -36,47 +37,17 @@
#include <asm/uaccess.h>
#include <asm/bootinfo.h>
-int ptrace_getregs(struct task_struct *child, __s64 __user *data);
-int ptrace_setregs(struct task_struct *child, __s64 __user *data);
-
-int ptrace_getfpregs(struct task_struct *child, __u32 __user *data);
-int ptrace_setfpregs(struct task_struct *child, __u32 __user *data);
-
/*
* Tracing a 32-bit process with a 64-bit strace and vice versa will not
* work. I don't know how to fix this.
*/
-asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
+long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
+ compat_ulong_t caddr, compat_ulong_t cdata)
{
- struct task_struct *child;
+ int addr = caddr;
+ int data = cdata;
int ret;
-#if 0
- printk("ptrace(r=%d,pid=%d,addr=%08lx,data=%08lx)\n",
- (int) request, (int) pid, (unsigned long) addr,
- (unsigned long) data);
-#endif
- lock_kernel();
- if (request == PTRACE_TRACEME) {
- ret = ptrace_traceme();
- goto out;
- }
-
- child = ptrace_get_task_struct(pid);
- if (IS_ERR(child)) {
- ret = PTR_ERR(child);
- goto out;
- }
-
- if (request == PTRACE_ATTACH) {
- ret = ptrace_attach(child);
- goto out_tsk;
- }
-
- ret = ptrace_check_attach(child, request == PTRACE_KILL);
- if (ret < 0)
- goto out_tsk;
-
switch (request) {
/* when I and D space are separate, these will need to be fixed. */
case PTRACE_PEEKTEXT: /* read word at location addr. */
@@ -214,7 +185,7 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
if (!cpu_has_dsp) {
tmp = 0;
ret = -EIO;
- goto out_tsk;
+ goto out;
}
dregs = __get_dsp_regs(child);
tmp = (unsigned long) (dregs[addr - DSP_BASE]);
@@ -224,14 +195,14 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
if (!cpu_has_dsp) {
tmp = 0;
ret = -EIO;
- goto out_tsk;
+ goto out;
}
tmp = child->thread.dsp.dspcontrol;
break;
default:
tmp = 0;
ret = -EIO;
- goto out_tsk;
+ goto out;
}
ret = put_user(tmp, (unsigned __user *) (unsigned long) data);
break;
@@ -410,14 +381,20 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
(unsigned long __user *) (unsigned long) data);
break;
+ case PTRACE_GET_WATCH_REGS:
+ ret = ptrace_get_watch_regs(child,
+ (struct pt_watch_regs __user *) (unsigned long) addr);
+ break;
+
+ case PTRACE_SET_WATCH_REGS:
+ ret = ptrace_set_watch_regs(child,
+ (struct pt_watch_regs __user *) (unsigned long) addr);
+ break;
+
default:
ret = ptrace_request(child, request, addr, data);
break;
}
-
-out_tsk:
- put_task_struct(child);
out:
- unlock_kernel();
return ret;
}
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
index dfd868b6836..4ce93aa7b37 100644
--- a/arch/mips/kernel/rtlx.c
+++ b/arch/mips/kernel/rtlx.c
@@ -522,8 +522,8 @@ static int __init rtlx_module_init(void)
atomic_set(&channel_wqs[i].in_open, 0);
mutex_init(&channel_wqs[i].mutex);
- dev = device_create_drvdata(mt_class, NULL, MKDEV(major, i),
- NULL, "%s%d", module_name, i);
+ dev = device_create(mt_class, NULL, MKDEV(major, i), NULL,
+ "%s%d", module_name, i);
if (IS_ERR(dev)) {
err = PTR_ERR(dev);
goto out_chrdev;
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index da7f1b6ea0f..e266b3aa656 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -214,12 +214,12 @@ EXPORT(sysn32_call_table)
PTR sys_fchown
PTR sys_lchown
PTR sys_umask
- PTR sys32_gettimeofday
+ PTR compat_sys_gettimeofday
PTR compat_sys_getrlimit /* 6095 */
PTR compat_sys_getrusage
PTR compat_sys_sysinfo
PTR compat_sys_times
- PTR sys32_ptrace
+ PTR compat_sys_ptrace
PTR sys_getuid /* 6100 */
PTR sys_syslog
PTR sys_getgid
@@ -279,7 +279,7 @@ EXPORT(sysn32_call_table)
PTR sys_chroot
PTR sys_sync
PTR sys_acct
- PTR sys32_settimeofday
+ PTR compat_sys_settimeofday
PTR compat_sys_mount /* 6160 */
PTR sys_umount
PTR sys_swapon
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index d7cd1aac9ad..6c7ef8313eb 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -231,7 +231,7 @@ sys_call_table:
PTR sys_setuid
PTR sys_getuid
PTR compat_sys_stime /* 4025 */
- PTR sys32_ptrace
+ PTR compat_sys_ptrace
PTR sys_alarm
PTR sys_ni_syscall /* was sys_fstat */
PTR sys_pause
@@ -283,8 +283,8 @@ sys_call_table:
PTR compat_sys_setrlimit /* 4075 */
PTR compat_sys_getrlimit
PTR compat_sys_getrusage
- PTR sys32_gettimeofday
- PTR sys32_settimeofday
+ PTR compat_sys_gettimeofday
+ PTR compat_sys_settimeofday
PTR sys_getgroups /* 4080 */
PTR sys_setgroups
PTR sys_ni_syscall /* old_select */
diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c
index 572c610db1b..652709b353a 100644
--- a/arch/mips/kernel/signal32.c
+++ b/arch/mips/kernel/signal32.c
@@ -482,6 +482,18 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from)
return err;
}
+int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
+{
+ memset(to, 0, sizeof *to);
+
+ if (copy_from_user(to, from, 3*sizeof(int)) ||
+ copy_from_user(to->_sifields._pad,
+ from->_sifields._pad, SI_PAD_SIZE32))
+ return -EFAULT;
+
+ return 0;
+}
+
asmlinkage void sys32_sigreturn(nabi_no_regargs struct pt_regs regs)
{
struct sigframe32 __user *frame;
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 4410f172b8a..7b59cfb7e60 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -121,6 +121,8 @@ asmlinkage __cpuinit void start_secondary(void)
cpu = smp_processor_id();
cpu_data[cpu].udelay_val = loops_per_jiffy;
+ notify_cpu_starting(cpu);
+
mp_ops->smp_finish();
set_cpu_sibling_map(cpu);
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index a516286532a..897fb2b4751 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -1,4 +1,21 @@
-/* Copyright (C) 2004 Mips Technologies, Inc */
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2004 Mips Technologies, Inc
+ * Copyright (C) 2008 Kevin D. Kissell
+ */
#include <linux/clockchips.h>
#include <linux/kernel.h>
@@ -21,7 +38,6 @@
#include <asm/time.h>
#include <asm/addrspace.h>
#include <asm/smtc.h>
-#include <asm/smtc_ipi.h>
#include <asm/smtc_proc.h>
/*
@@ -58,11 +74,6 @@ unsigned long irq_hwmask[NR_IRQS];
asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS];
-/*
- * Clock interrupt "latch" buffers, per "CPU"
- */
-
-static atomic_t ipi_timer_latch[NR_CPUS];
/*
* Number of InterProcessor Interrupt (IPI) message buffers to allocate
@@ -70,7 +81,7 @@ static atomic_t ipi_timer_latch[NR_CPUS];
#define IPIBUF_PER_CPU 4
-static struct smtc_ipi_q IPIQ[NR_CPUS];
+struct smtc_ipi_q IPIQ[NR_CPUS];
static struct smtc_ipi_q freeIPIq;
@@ -282,7 +293,7 @@ static void smtc_configure_tlb(void)
* phys_cpu_present_map and the logical/physical mappings.
*/
-int __init mipsmt_build_cpu_map(int start_cpu_slot)
+int __init smtc_build_cpu_map(int start_cpu_slot)
{
int i, ntcs;
@@ -325,7 +336,12 @@ static void smtc_tc_setup(int vpe, int tc, int cpu)
write_tc_c0_tcstatus((read_tc_c0_tcstatus()
& ~(TCSTATUS_TKSU | TCSTATUS_DA | TCSTATUS_IXMT))
| TCSTATUS_A);
- write_tc_c0_tccontext(0);
+ /*
+ * TCContext gets an offset from the base of the IPIQ array
+ * to be used in low-level code to detect the presence of
+ * an active IPI queue
+ */
+ write_tc_c0_tccontext((sizeof(struct smtc_ipi_q) * cpu) << 16);
/* Bind tc to vpe */
write_tc_c0_tcbind(vpe);
/* In general, all TCs should have the same cpu_data indications */
@@ -336,10 +352,18 @@ static void smtc_tc_setup(int vpe, int tc, int cpu)
cpu_data[cpu].options &= ~MIPS_CPU_FPU;
cpu_data[cpu].vpe_id = vpe;
cpu_data[cpu].tc_id = tc;
+ /* Multi-core SMTC hasn't been tested, but be prepared */
+ cpu_data[cpu].core = (read_vpe_c0_ebase() >> 1) & 0xff;
}
+/*
+ * Tweak to get Count registes in as close a sync as possible.
+ * Value seems good for 34K-class cores.
+ */
+
+#define CP0_SKEW 8
-void mipsmt_prepare_cpus(void)
+void smtc_prepare_cpus(int cpus)
{
int i, vpe, tc, ntc, nvpe, tcpervpe[NR_CPUS], slop, cpu;
unsigned long flags;
@@ -363,13 +387,13 @@ void mipsmt_prepare_cpus(void)
IPIQ[i].head = IPIQ[i].tail = NULL;
spin_lock_init(&IPIQ[i].lock);
IPIQ[i].depth = 0;
- atomic_set(&ipi_timer_latch[i], 0);
}
/* cpu_data index starts at zero */
cpu = 0;
cpu_data[cpu].vpe_id = 0;
cpu_data[cpu].tc_id = 0;
+ cpu_data[cpu].core = (read_c0_ebase() >> 1) & 0xff;
cpu++;
/* Report on boot-time options */
@@ -484,7 +508,8 @@ void mipsmt_prepare_cpus(void)
write_vpe_c0_compare(0);
/* Propagate Config7 */
write_vpe_c0_config7(read_c0_config7());
- write_vpe_c0_count(read_c0_count());
+ write_vpe_c0_count(read_c0_count() + CP0_SKEW);
+ ehb();
}
/* enable multi-threading within VPE */
write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() | VPECONTROL_TE);
@@ -556,7 +581,7 @@ void mipsmt_prepare_cpus(void)
void __cpuinit smtc_boot_secondary(int cpu, struct task_struct *idle)
{
extern u32 kernelsp[NR_CPUS];
- long flags;
+ unsigned long flags;
int mtflags;
LOCK_MT_PRA();
@@ -585,24 +610,22 @@ void __cpuinit smtc_boot_secondary(int cpu, struct task_struct *idle)
void smtc_init_secondary(void)
{
- /*
- * Start timer on secondary VPEs if necessary.
- * plat_timer_setup has already have been invoked by init/main
- * on "boot" TC. Like per_cpu_trap_init() hack, this assumes that
- * SMTC init code assigns TCs consdecutively and in ascending order
- * to across available VPEs.
- */
- if (((read_c0_tcbind() & TCBIND_CURTC) != 0) &&
- ((read_c0_tcbind() & TCBIND_CURVPE)
- != cpu_data[smp_processor_id() - 1].vpe_id)){
- write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ);
- }
-
local_irq_enable();
}
void smtc_smp_finish(void)
{
+ int cpu = smp_processor_id();
+
+ /*
+ * Lowest-numbered CPU per VPE starts a clock tick.
+ * Like per_cpu_trap_init() hack, this assumes that
+ * SMTC init code assigns TCs consdecutively and
+ * in ascending order across available VPEs.
+ */
+ if (cpu > 0 && (cpu_data[cpu].vpe_id != cpu_data[cpu - 1].vpe_id))
+ write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ);
+
printk("TC %d going on-line as CPU %d\n",
cpu_data[smp_processor_id()].tc_id, smp_processor_id());
}
@@ -753,8 +776,10 @@ void smtc_send_ipi(int cpu, int type, unsigned int action)
{
int tcstatus;
struct smtc_ipi *pipi;
- long flags;
+ unsigned long flags;
int mtflags;
+ unsigned long tcrestart;
+ extern void r4k_wait_irqoff(void), __pastwait(void);
if (cpu == smp_processor_id()) {
printk("Cannot Send IPI to self!\n");
@@ -771,8 +796,6 @@ void smtc_send_ipi(int cpu, int type, unsigned int action)
pipi->arg = (void *)action;
pipi->dest = cpu;
if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) {
- if (type == SMTC_CLOCK_TICK)
- atomic_inc(&ipi_timer_latch[cpu]);
/* If not on same VPE, enqueue and send cross-VPE interrupt */
smtc_ipi_nq(&IPIQ[cpu], pipi);
LOCK_CORE_PRA();
@@ -800,22 +823,29 @@ void smtc_send_ipi(int cpu, int type, unsigned int action)
if ((tcstatus & TCSTATUS_IXMT) != 0) {
/*
- * Spin-waiting here can deadlock,
- * so we queue the message for the target TC.
+ * If we're in the the irq-off version of the wait
+ * loop, we need to force exit from the wait and
+ * do a direct post of the IPI.
+ */
+ if (cpu_wait == r4k_wait_irqoff) {
+ tcrestart = read_tc_c0_tcrestart();
+ if (tcrestart >= (unsigned long)r4k_wait_irqoff
+ && tcrestart < (unsigned long)__pastwait) {
+ write_tc_c0_tcrestart(__pastwait);
+ tcstatus &= ~TCSTATUS_IXMT;
+ write_tc_c0_tcstatus(tcstatus);
+ goto postdirect;
+ }
+ }
+ /*
+ * Otherwise we queue the message for the target TC
+ * to pick up when he does a local_irq_restore()
*/
write_tc_c0_tchalt(0);
UNLOCK_CORE_PRA();
- /* Try to reduce redundant timer interrupt messages */
- if (type == SMTC_CLOCK_TICK) {
- if (atomic_postincrement(&ipi_timer_latch[cpu])!=0){
- smtc_ipi_nq(&freeIPIq, pipi);
- return;
- }
- }
smtc_ipi_nq(&IPIQ[cpu], pipi);
} else {
- if (type == SMTC_CLOCK_TICK)
- atomic_inc(&ipi_timer_latch[cpu]);
+postdirect:
post_direct_ipi(cpu, pipi);
write_tc_c0_tchalt(0);
UNLOCK_CORE_PRA();
@@ -883,7 +913,7 @@ static void ipi_call_interrupt(void)
smp_call_function_interrupt();
}
-DECLARE_PER_CPU(struct clock_event_device, smtc_dummy_clockevent_device);
+DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device);
void ipi_decode(struct smtc_ipi *pipi)
{
@@ -891,20 +921,13 @@ void ipi_decode(struct smtc_ipi *pipi)
struct clock_event_device *cd;
void *arg_copy = pipi->arg;
int type_copy = pipi->type;
- int ticks;
-
smtc_ipi_nq(&freeIPIq, pipi);
switch (type_copy) {
case SMTC_CLOCK_TICK:
irq_enter();
kstat_this_cpu.irqs[MIPS_CPU_IRQ_BASE + 1]++;
- cd = &per_cpu(smtc_dummy_clockevent_device, cpu);
- ticks = atomic_read(&ipi_timer_latch[cpu]);
- atomic_sub(ticks, &ipi_timer_latch[cpu]);
- while (ticks) {
- cd->event_handler(cd);
- ticks--;
- }
+ cd = &per_cpu(mips_clockevent_device, cpu);
+ cd->event_handler(cd);
irq_exit();
break;
@@ -937,24 +960,48 @@ void ipi_decode(struct smtc_ipi *pipi)
}
}
+/*
+ * Similar to smtc_ipi_replay(), but invoked from context restore,
+ * so it reuses the current exception frame rather than set up a
+ * new one with self_ipi.
+ */
+
void deferred_smtc_ipi(void)
{
- struct smtc_ipi *pipi;
- unsigned long flags;
-/* DEBUG */
- int q = smp_processor_id();
+ int cpu = smp_processor_id();
/*
* Test is not atomic, but much faster than a dequeue,
* and the vast majority of invocations will have a null queue.
+ * If irq_disabled when this was called, then any IPIs queued
+ * after we test last will be taken on the next irq_enable/restore.
+ * If interrupts were enabled, then any IPIs added after the
+ * last test will be taken directly.
*/
- if (IPIQ[q].head != NULL) {
- while((pipi = smtc_ipi_dq(&IPIQ[q])) != NULL) {
- /* ipi_decode() should be called with interrupts off */
- local_irq_save(flags);
+
+ while (IPIQ[cpu].head != NULL) {
+ struct smtc_ipi_q *q = &IPIQ[cpu];
+ struct smtc_ipi *pipi;
+ unsigned long flags;
+
+ /*
+ * It may be possible we'll come in with interrupts
+ * already enabled.
+ */
+ local_irq_save(flags);
+
+ spin_lock(&q->lock);
+ pipi = __smtc_ipi_dq(q);
+ spin_unlock(&q->lock);
+ if (pipi != NULL)
ipi_decode(pipi);
- local_irq_restore(flags);
- }
+ /*
+ * The use of the __raw_local restore isn't
+ * as obviously necessary here as in smtc_ipi_replay(),
+ * but it's more efficient, given that we're already
+ * running down the IPI queue.
+ */
+ __raw_local_irq_restore(flags);
}
}
@@ -975,7 +1022,7 @@ static irqreturn_t ipi_interrupt(int irq, void *dev_idm)
struct smtc_ipi *pipi;
unsigned long tcstatus;
int sent;
- long flags;
+ unsigned long flags;
unsigned int mtflags;
unsigned int vpflags;
@@ -1066,55 +1113,53 @@ static void setup_cross_vpe_interrupts(unsigned int nvpe)
/*
* SMTC-specific hacks invoked from elsewhere in the kernel.
- *
- * smtc_ipi_replay is called from raw_local_irq_restore which is only ever
- * called with interrupts disabled. We do rely on interrupts being disabled
- * here because using spin_lock_irqsave()/spin_unlock_irqrestore() would
- * result in a recursive call to raw_local_irq_restore().
*/
-static void __smtc_ipi_replay(void)
+ /*
+ * smtc_ipi_replay is called from raw_local_irq_restore
+ */
+
+void smtc_ipi_replay(void)
{
unsigned int cpu = smp_processor_id();
/*
* To the extent that we've ever turned interrupts off,
* we may have accumulated deferred IPIs. This is subtle.
- * If we use the smtc_ipi_qdepth() macro, we'll get an
- * exact number - but we'll also disable interrupts
- * and create a window of failure where a new IPI gets
- * queued after we test the depth but before we re-enable
- * interrupts. So long as IXMT never gets set, however,
* we should be OK: If we pick up something and dispatch
* it here, that's great. If we see nothing, but concurrent
* with this operation, another TC sends us an IPI, IXMT
* is clear, and we'll handle it as a real pseudo-interrupt
- * and not a pseudo-pseudo interrupt.
+ * and not a pseudo-pseudo interrupt. The important thing
+ * is to do the last check for queued message *after* the
+ * re-enabling of interrupts.
*/
- if (IPIQ[cpu].depth > 0) {
- while (1) {
- struct smtc_ipi_q *q = &IPIQ[cpu];
- struct smtc_ipi *pipi;
- extern void self_ipi(struct smtc_ipi *);
-
- spin_lock(&q->lock);
- pipi = __smtc_ipi_dq(q);
- spin_unlock(&q->lock);
- if (!pipi)
- break;
+ while (IPIQ[cpu].head != NULL) {
+ struct smtc_ipi_q *q = &IPIQ[cpu];
+ struct smtc_ipi *pipi;
+ unsigned long flags;
+
+ /*
+ * It's just possible we'll come in with interrupts
+ * already enabled.
+ */
+ local_irq_save(flags);
+
+ spin_lock(&q->lock);
+ pipi = __smtc_ipi_dq(q);
+ spin_unlock(&q->lock);
+ /*
+ ** But use a raw restore here to avoid recursion.
+ */
+ __raw_local_irq_restore(flags);
+ if (pipi) {
self_ipi(pipi);
smtc_cpu_stats[cpu].selfipis++;
}
}
}
-void smtc_ipi_replay(void)
-{
- raw_local_irq_disable();
- __smtc_ipi_replay();
-}
-
EXPORT_SYMBOL(smtc_ipi_replay);
void smtc_idle_loop_hook(void)
@@ -1193,40 +1238,13 @@ void smtc_idle_loop_hook(void)
}
}
- /*
- * Now that we limit outstanding timer IPIs, check for hung TC
- */
- for (tc = 0; tc < NR_CPUS; tc++) {
- /* Don't check ourself - we'll dequeue IPIs just below */
- if ((tc != smp_processor_id()) &&
- atomic_read(&ipi_timer_latch[tc]) > timerq_limit) {
- if (clock_hang_reported[tc] == 0) {
- pdb_msg += sprintf(pdb_msg,
- "TC %d looks hung with timer latch at %d\n",
- tc, atomic_read(&ipi_timer_latch[tc]));
- clock_hang_reported[tc]++;
- }
- }
- }
emt(mtflags);
local_irq_restore(flags);
if (pdb_msg != &id_ho_db_msg[0])
printk("CPU%d: %s", smp_processor_id(), id_ho_db_msg);
#endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
- /*
- * Replay any accumulated deferred IPIs. If "Instant Replay"
- * is in use, there should never be any.
- */
-#ifndef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY
- {
- unsigned long flags;
-
- local_irq_save(flags);
- __smtc_ipi_replay();
- local_irq_restore(flags);
- }
-#endif /* CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY */
+ smtc_ipi_replay();
}
void smtc_soft_dump(void)
@@ -1242,10 +1260,6 @@ void smtc_soft_dump(void)
printk("%d: %ld\n", i, smtc_cpu_stats[i].selfipis);
}
smtc_ipi_qdump();
- printk("Timer IPI Backlogs:\n");
- for (i=0; i < NR_CPUS; i++) {
- printk("%d: %d\n", i, atomic_read(&ipi_timer_latch[i]));
- }
printk("%d Recoveries of \"stolen\" FPU\n",
atomic_read(&smtc_fpu_recoveries));
}
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index 343015a2f41..37970d9b218 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -7,7 +7,6 @@
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
* Copyright (C) 2001 MIPS Technologies, Inc.
*/
-#include <linux/a.out.h>
#include <linux/capability.h>
#include <linux/errno.h>
#include <linux/linkage.h>
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 5fd0cd020af..80b9e070c20 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -42,6 +42,7 @@
#include <asm/tlbdebug.h>
#include <asm/traps.h>
#include <asm/uaccess.h>
+#include <asm/watch.h>
#include <asm/mmu_context.h>
#include <asm/types.h>
#include <asm/stacktrace.h>
@@ -825,8 +826,10 @@ static void mt_ase_fp_affinity(void)
if (cpus_intersects(current->cpus_allowed, mt_fpu_cpumask)) {
cpumask_t tmask;
- cpus_and(tmask, current->thread.user_cpus_allowed,
- mt_fpu_cpumask);
+ current->thread.user_cpus_allowed
+ = current->cpus_allowed;
+ cpus_and(tmask, current->cpus_allowed,
+ mt_fpu_cpumask);
set_cpus_allowed(current, tmask);
set_thread_flag(TIF_FPUBOUND);
}
@@ -910,13 +913,26 @@ asmlinkage void do_mdmx(struct pt_regs *regs)
asmlinkage void do_watch(struct pt_regs *regs)
{
+ u32 cause;
+
/*
- * We use the watch exception where available to detect stack
- * overflows.
+ * Clear WP (bit 22) bit of cause register so we don't loop
+ * forever.
*/
- dump_tlb_all();
- show_regs(regs);
- panic("Caught WATCH exception - probably caused by stack overflow.");
+ cause = read_c0_cause();
+ cause &= ~(1 << 22);
+ write_c0_cause(cause);
+
+ /*
+ * If the current thread has the watch registers loaded, save
+ * their values and send SIGTRAP. Otherwise another thread
+ * left the registers set, clear them and continue.
+ */
+ if (test_tsk_thread_flag(current, TIF_LOAD_WATCH)) {
+ mips_read_watch_registers();
+ force_sig(SIGTRAP, current);
+ } else
+ mips_clear_watch_registers();
}
asmlinkage void do_mcheck(struct pt_regs *regs)
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index afb119f3568..58738c8d754 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -104,7 +104,7 @@ SECTIONS
. = ALIGN(_PAGE_SIZE);
__nosave_end = .;
- . = ALIGN(32);
+ . = ALIGN(1 << CONFIG_MIPS_L1_CACHE_SHIFT);
.data.cacheline_aligned : {
*(.data.cacheline_aligned)
}
diff --git a/arch/mips/kernel/watch.c b/arch/mips/kernel/watch.c
new file mode 100644
index 00000000000..c1540696803
--- /dev/null
+++ b/arch/mips/kernel/watch.c
@@ -0,0 +1,188 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 David Daney
+ */
+
+#include <linux/sched.h>
+
+#include <asm/processor.h>
+#include <asm/watch.h>
+
+/*
+ * Install the watch registers for the current thread. A maximum of
+ * four registers are installed although the machine may have more.
+ */
+void mips_install_watch_registers(void)
+{
+ struct mips3264_watch_reg_state *watches =
+ &current->thread.watch.mips3264;
+ switch (current_cpu_data.watch_reg_use_cnt) {
+ default:
+ BUG();
+ case 4:
+ write_c0_watchlo3(watches->watchlo[3]);
+ /* Write 1 to the I, R, and W bits to clear them, and
+ 1 to G so all ASIDs are trapped. */
+ write_c0_watchhi3(0x40000007 | watches->watchhi[3]);
+ case 3:
+ write_c0_watchlo2(watches->watchlo[2]);
+ write_c0_watchhi2(0x40000007 | watches->watchhi[2]);
+ case 2:
+ write_c0_watchlo1(watches->watchlo[1]);
+ write_c0_watchhi1(0x40000007 | watches->watchhi[1]);
+ case 1:
+ write_c0_watchlo0(watches->watchlo[0]);
+ write_c0_watchhi0(0x40000007 | watches->watchhi[0]);
+ }
+}
+
+/*
+ * Read back the watchhi registers so the user space debugger has
+ * access to the I, R, and W bits. A maximum of four registers are
+ * read although the machine may have more.
+ */
+void mips_read_watch_registers(void)
+{
+ struct mips3264_watch_reg_state *watches =
+ &current->thread.watch.mips3264;
+ switch (current_cpu_data.watch_reg_use_cnt) {
+ default:
+ BUG();
+ case 4:
+ watches->watchhi[3] = (read_c0_watchhi3() & 0x0fff);
+ case 3:
+ watches->watchhi[2] = (read_c0_watchhi2() & 0x0fff);
+ case 2:
+ watches->watchhi[1] = (read_c0_watchhi1() & 0x0fff);
+ case 1:
+ watches->watchhi[0] = (read_c0_watchhi0() & 0x0fff);
+ }
+ if (current_cpu_data.watch_reg_use_cnt == 1 &&
+ (watches->watchhi[0] & 7) == 0) {
+ /* Pathological case of release 1 architecture that
+ * doesn't set the condition bits. We assume that
+ * since we got here, the watch condition was met and
+ * signal that the conditions requested in watchlo
+ * were met. */
+ watches->watchhi[0] |= (watches->watchlo[0] & 7);
+ }
+ }
+
+/*
+ * Disable all watch registers. Although only four registers are
+ * installed, all are cleared to eliminate the possibility of endless
+ * looping in the watch handler.
+ */
+void mips_clear_watch_registers(void)
+{
+ switch (current_cpu_data.watch_reg_count) {
+ default:
+ BUG();
+ case 8:
+ write_c0_watchlo7(0);
+ case 7:
+ write_c0_watchlo6(0);
+ case 6:
+ write_c0_watchlo5(0);
+ case 5:
+ write_c0_watchlo4(0);
+ case 4:
+ write_c0_watchlo3(0);
+ case 3:
+ write_c0_watchlo2(0);
+ case 2:
+ write_c0_watchlo1(0);
+ case 1:
+ write_c0_watchlo0(0);
+ }
+}
+
+__cpuinit void mips_probe_watch_registers(struct cpuinfo_mips *c)
+{
+ unsigned int t;
+
+ if ((c->options & MIPS_CPU_WATCH) == 0)
+ return;
+ /*
+ * Check which of the I,R and W bits are supported, then
+ * disable the register.
+ */
+ write_c0_watchlo0(7);
+ t = read_c0_watchlo0();
+ write_c0_watchlo0(0);
+ c->watch_reg_masks[0] = t & 7;
+
+ /* Write the mask bits and read them back to determine which
+ * can be used. */
+ c->watch_reg_count = 1;
+ c->watch_reg_use_cnt = 1;
+ t = read_c0_watchhi0();
+ write_c0_watchhi0(t | 0xff8);
+ t = read_c0_watchhi0();
+ c->watch_reg_masks[0] |= (t & 0xff8);
+ if ((t & 0x80000000) == 0)
+ return;
+
+ write_c0_watchlo1(7);
+ t = read_c0_watchlo1();
+ write_c0_watchlo1(0);
+ c->watch_reg_masks[1] = t & 7;
+
+ c->watch_reg_count = 2;
+ c->watch_reg_use_cnt = 2;
+ t = read_c0_watchhi1();
+ write_c0_watchhi1(t | 0xff8);
+ t = read_c0_watchhi1();
+ c->watch_reg_masks[1] |= (t & 0xff8);
+ if ((t & 0x80000000) == 0)
+ return;
+
+ write_c0_watchlo2(7);
+ t = read_c0_watchlo2();
+ write_c0_watchlo2(0);
+ c->watch_reg_masks[2] = t & 7;
+
+ c->watch_reg_count = 3;
+ c->watch_reg_use_cnt = 3;
+ t = read_c0_watchhi2();
+ write_c0_watchhi2(t | 0xff8);
+ t = read_c0_watchhi2();
+ c->watch_reg_masks[2] |= (t & 0xff8);
+ if ((t & 0x80000000) == 0)
+ return;
+
+ write_c0_watchlo3(7);
+ t = read_c0_watchlo3();
+ write_c0_watchlo3(0);
+ c->watch_reg_masks[3] = t & 7;
+
+ c->watch_reg_count = 4;
+ c->watch_reg_use_cnt = 4;
+ t = read_c0_watchhi3();
+ write_c0_watchhi3(t | 0xff8);
+ t = read_c0_watchhi3();
+ c->watch_reg_masks[3] |= (t & 0xff8);
+ if ((t & 0x80000000) == 0)
+ return;
+
+ /* We use at most 4, but probe and report up to 8. */
+ c->watch_reg_count = 5;
+ t = read_c0_watchhi4();
+ if ((t & 0x80000000) == 0)
+ return;
+
+ c->watch_reg_count = 6;
+ t = read_c0_watchhi5();
+ if ((t & 0x80000000) == 0)
+ return;
+
+ c->watch_reg_count = 7;
+ t = read_c0_watchhi6();
+ if ((t & 0x80000000) == 0)
+ return;
+
+ c->watch_reg_count = 8;
+}
diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c
index 866881ec0cf..8f88886feb1 100644
--- a/arch/mips/lasat/sysctl.c
+++ b/arch/mips/lasat/sysctl.c
@@ -38,14 +38,13 @@
#endif
/* Strategy function to write EEPROM after changing string entry */
-int sysctl_lasatstring(ctl_table *table, int *name, int nlen,
+int sysctl_lasatstring(ctl_table *table,
void *oldval, size_t *oldlenp,
void *newval, size_t newlen)
{
int r;
- r = sysctl_string(table, name,
- nlen, oldval, oldlenp, newval, newlen);
+ r = sysctl_string(table, oldval, oldlenp, newval, newlen);
if (r < 0)
return r;
@@ -113,13 +112,13 @@ int proc_dolasatrtc(ctl_table *table, int write, struct file *filp,
#endif
/* Sysctl for setting the IP addresses */
-int sysctl_lasat_intvec(ctl_table *table, int *name, int nlen,
+int sysctl_lasat_intvec(ctl_table *table,
void *oldval, size_t *oldlenp,
void *newval, size_t newlen)
{
int r;
- r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen);
+ r = sysctl_intvec(table, oldval, oldlenp, newval, newlen);
if (r < 0)
return r;
@@ -131,7 +130,7 @@ int sysctl_lasat_intvec(ctl_table *table, int *name, int nlen,
#ifdef CONFIG_DS1603
/* Same for RTC */
-int sysctl_lasat_rtc(ctl_table *table, int *name, int nlen,
+int sysctl_lasat_rtc(ctl_table *table,
void *oldval, size_t *oldlenp,
void *newval, size_t newlen)
{
@@ -140,7 +139,7 @@ int sysctl_lasat_rtc(ctl_table *table, int *name, int nlen,
rtctmp = read_persistent_clock();
if (rtctmp < 0)
rtctmp = 0;
- r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen);
+ r = sysctl_intvec(table, oldval, oldlenp, newval, newlen);
if (r < 0)
return r;
if (newval && newlen)
@@ -211,13 +210,13 @@ int proc_lasat_ip(ctl_table *table, int write, struct file *filp,
}
#endif
-static int sysctl_lasat_prid(ctl_table *table, int *name, int nlen,
+static int sysctl_lasat_prid(ctl_table *table,
void *oldval, size_t *oldlenp,
void *newval, size_t newlen)
{
int r;
- r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen);
+ r = sysctl_intvec(table, oldval, oldlenp, newval, newlen);
if (r < 0)
return r;
if (newval && newlen) {
diff --git a/arch/mips/lib/csum_partial.S b/arch/mips/lib/csum_partial.S
index edac9892c51..6b876ca299e 100644
--- a/arch/mips/lib/csum_partial.S
+++ b/arch/mips/lib/csum_partial.S
@@ -55,20 +55,14 @@
#define UNIT(unit) ((unit)*NBYTES)
#define ADDC(sum,reg) \
- .set push; \
- .set noat; \
ADD sum, reg; \
sltu v1, sum, reg; \
ADD sum, v1; \
- .set pop
#define ADDC32(sum,reg) \
- .set push; \
- .set noat; \
addu sum, reg; \
sltu v1, sum, reg; \
addu sum, v1; \
- .set pop
#define CSUM_BIGCHUNK1(src, offset, sum, _t0, _t1, _t2, _t3) \
LOAD _t0, (offset + UNIT(0))(src); \
@@ -267,8 +261,6 @@ LEAF(csum_partial)
1: ADDC(sum, t1)
/* fold checksum */
- .set push
- .set noat
#ifdef USE_DOUBLE
dsll32 v1, sum, 0
daddu sum, v1
@@ -276,21 +268,22 @@ LEAF(csum_partial)
dsra32 sum, sum, 0
addu sum, v1
#endif
- sll v1, sum, 16
- addu sum, v1
- sltu v1, sum, v1
- srl sum, sum, 16
- addu sum, v1
/* odd buffer alignment? */
- beqz t7, 1f
- nop
- sll v1, sum, 8
+#ifdef CPU_MIPSR2
+ wsbh v1, sum
+ movn sum, v1, t7
+#else
+ beqz t7, 1f /* odd buffer alignment? */
+ lui v1, 0x00ff
+ addu v1, 0x00ff
+ and t0, sum, v1
+ sll t0, t0, 8
srl sum, sum, 8
- or sum, v1
- andi sum, 0xffff
- .set pop
+ and sum, sum, v1
+ or sum, sum, t0
1:
+#endif
.set reorder
/* Add the passed partial csum. */
ADDC32(sum, a2)
@@ -669,8 +662,6 @@ EXC( sb t0, NBYTES-2(dst), .Ls_exc)
ADDC(sum, t2)
.Ldone:
/* fold checksum */
- .set push
- .set noat
#ifdef USE_DOUBLE
dsll32 v1, sum, 0
daddu sum, v1
@@ -678,21 +669,21 @@ EXC( sb t0, NBYTES-2(dst), .Ls_exc)
dsra32 sum, sum, 0
addu sum, v1
#endif
- sll v1, sum, 16
- addu sum, v1
- sltu v1, sum, v1
- srl sum, sum, 16
- addu sum, v1
- /* odd buffer alignment? */
- beqz odd, 1f
- nop
- sll v1, sum, 8
+#ifdef CPU_MIPSR2
+ wsbh v1, sum
+ movn sum, v1, odd
+#else
+ beqz odd, 1f /* odd buffer alignment? */
+ lui v1, 0x00ff
+ addu v1, 0x00ff
+ and t0, sum, v1
+ sll t0, t0, 8
srl sum, sum, 8
- or sum, v1
- andi sum, 0xffff
- .set pop
+ and sum, sum, v1
+ or sum, sum, t0
1:
+#endif
.set reorder
ADDC32(sum, psum)
jr ra
diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile
index 3b7dd722c32..cef2db8d222 100644
--- a/arch/mips/mti-malta/Makefile
+++ b/arch/mips/mti-malta/Makefile
@@ -15,6 +15,6 @@ obj-$(CONFIG_EARLY_PRINTK) += malta-console.o
obj-$(CONFIG_PCI) += malta-pci.o
# FIXME FIXME FIXME
-obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o
+obj-$(CONFIG_MIPS_MT_SMTC) += malta-smtc.o
EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/mti-malta/malta-smtc.c b/arch/mips/mti-malta/malta-smtc.c
index 5ea705e4945..f84a46a8ae6 100644
--- a/arch/mips/mti-malta/malta-smtc.c
+++ b/arch/mips/mti-malta/malta-smtc.c
@@ -84,12 +84,17 @@ static void msmtc_cpus_done(void)
static void __init msmtc_smp_setup(void)
{
- mipsmt_build_cpu_map(0);
+ /*
+ * we won't get the definitive value until
+ * we've run smtc_prepare_cpus later, but
+ * we would appear to need an upper bound now.
+ */
+ smp_num_siblings = smtc_build_cpu_map(0);
}
static void __init msmtc_prepare_cpus(unsigned int max_cpus)
{
- mipsmt_prepare_cpus();
+ smtc_prepare_cpus(max_cpus);
}
struct plat_smp_ops msmtc_smp_ops = {
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
index dd2fbd6645c..3bf3354547f 100644
--- a/arch/mips/oprofile/common.c
+++ b/arch/mips/oprofile/common.c
@@ -32,7 +32,7 @@ static int op_mips_setup(void)
return 0;
}
-static int op_mips_create_files(struct super_block * sb, struct dentry * root)
+static int op_mips_create_files(struct super_block *sb, struct dentry *root)
{
int i;
diff --git a/arch/mips/oprofile/op_impl.h b/arch/mips/oprofile/op_impl.h
index 2bfc17c3010..f04b54fb37d 100644
--- a/arch/mips/oprofile/op_impl.h
+++ b/arch/mips/oprofile/op_impl.h
@@ -27,7 +27,7 @@ struct op_counter_config {
/* Per-architecture configury and hooks. */
struct op_mips_model {
void (*reg_setup) (struct op_counter_config *);
- void (*cpu_setup) (void * dummy);
+ void (*cpu_setup) (void *dummy);
int (*init)(void);
void (*exit)(void);
void (*cpu_start)(void *args);
diff --git a/arch/mips/oprofile/op_model_rm9000.c b/arch/mips/oprofile/op_model_rm9000.c
index a45d3202894..3aa81384966 100644
--- a/arch/mips/oprofile/op_model_rm9000.c
+++ b/arch/mips/oprofile/op_model_rm9000.c
@@ -80,7 +80,7 @@ static void rm9000_cpu_stop(void *args)
write_c0_perfcontrol(0);
}
-static irqreturn_t rm9000_perfcount_handler(int irq, void * dev_id)
+static irqreturn_t rm9000_perfcount_handler(int irq, void *dev_id)
{
unsigned int control = read_c0_perfcontrol();
struct pt_regs *regs = get_irq_regs();
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 15e01aec37f..b1886244ced 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_SOC_TX3927) += ops-tx3927.o
obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o
obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o
+obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o
#
# These are still pretty much in the old state, watch, go blind.
@@ -44,6 +45,7 @@ obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o
obj-$(CONFIG_TOSHIBA_JMR3927) += fixup-jmr3927.o
obj-$(CONFIG_SOC_TX4927) += pci-tx4927.o
obj-$(CONFIG_SOC_TX4938) += pci-tx4938.o
+obj-$(CONFIG_SOC_TX4939) += pci-tx4939.o
obj-$(CONFIG_TOSHIBA_RBTX4927) += fixup-rbtx4927.o
obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-rbtx4938.o
obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
diff --git a/arch/mips/pci/fixup-emma2rh.c b/arch/mips/pci/fixup-emma2rh.c
index a2705895561..846eae9cdd0 100644
--- a/arch/mips/pci/fixup-emma2rh.c
+++ b/arch/mips/pci/fixup-emma2rh.c
@@ -29,7 +29,6 @@
#include <linux/pci.h>
#include <asm/bootinfo.h>
-#include <asm/debug.h>
#include <asm/emma2rh/emma2rh.h>
diff --git a/arch/mips/pci/ops-pnx8550.c b/arch/mips/pci/ops-pnx8550.c
index 0e160d9f07c..1e6213fa7bd 100644
--- a/arch/mips/pci/ops-pnx8550.c
+++ b/arch/mips/pci/ops-pnx8550.c
@@ -29,8 +29,6 @@
#include <asm/mach-pnx8550/pci.h>
#include <asm/mach-pnx8550/glb.h>
-#include <asm/debug.h>
-
static inline void clear_status(void)
{
diff --git a/arch/mips/pci/pci-bcm47xx.c b/arch/mips/pci/pci-bcm47xx.c
new file mode 100644
index 00000000000..bea9b6cdfdb
--- /dev/null
+++ b/arch/mips/pci/pci-bcm47xx.c
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2008 Aurelien Jarno <aurelien@aurel32.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/ssb/ssb.h>
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ return 0;
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ int res;
+ u8 slot, pin;
+
+ res = ssb_pcibios_plat_dev_init(dev);
+ if (res < 0) {
+ printk(KERN_ALERT "PCI: Failed to init device %s\n",
+ pci_name(dev));
+ return res;
+ }
+
+ pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+ slot = PCI_SLOT(dev->devfn);
+ res = ssb_pcibios_map_irq(dev, slot, pin);
+
+ /* IRQ-0 and IRQ-1 are software interrupts. */
+ if (res < 2) {
+ printk(KERN_ALERT "PCI: Failed to map IRQ of device %s\n",
+ pci_name(dev));
+ return res;
+ }
+
+ dev->irq = res;
+ return 0;
+}
+
diff --git a/arch/mips/pci/pci-emma2rh.c b/arch/mips/pci/pci-emma2rh.c
index d99591a0cdf..772e283daa6 100644
--- a/arch/mips/pci/pci-emma2rh.c
+++ b/arch/mips/pci/pci-emma2rh.c
@@ -29,7 +29,6 @@
#include <linux/pci.h>
#include <asm/bootinfo.h>
-#include <asm/debug.h>
#include <asm/emma2rh/emma2rh.h>
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index bd78368c82b..f97ab146101 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -143,25 +143,47 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid)
*/
int __devinit pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
+ return 0;
+}
+
+/* Most MIPS systems have straight-forward swizzling needs. */
+static inline u8 bridge_swizzle(u8 pin, u8 slot)
+{
+ return (((pin - 1) + slot) % 4) + 1;
+}
+
+static inline struct pci_dev *bridge_root_dev(struct pci_dev *dev)
+{
+ while (dev->bus->parent) {
+ /* Move up the chain of bridges. */
+ dev = dev->bus->self;
+ }
+
+ return dev;
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
- int irq = bc->pci_int[slot];
+ struct pci_dev *rdev = bridge_root_dev(dev);
+ int slot = PCI_SLOT(rdev->devfn);
+ int irq;
+ irq = bc->pci_int[slot];
if (irq == -1) {
- irq = bc->pci_int[slot] = request_bridge_irq(bc);
+ irq = request_bridge_irq(bc);
if (irq < 0)
- panic("Can't allocate interrupt for PCI device %s\n",
- pci_name(dev));
+ return irq;
+
+ bc->pci_int[slot] = irq;
}
irq_to_bridge[irq] = bc;
irq_to_slot[irq] = slot;
- return irq;
-}
+ dev->irq = irq;
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
return 0;
}
diff --git a/arch/mips/pci/pci-tx4938.c b/arch/mips/pci/pci-tx4938.c
index 60e2c52c2c5..1ea257bc3b8 100644
--- a/arch/mips/pci/pci-tx4938.c
+++ b/arch/mips/pci/pci-tx4938.c
@@ -114,7 +114,7 @@ int __init tx4938_pciclk66_setup(void)
return pciclk;
}
-int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot)
+int __init tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot)
{
if (get_tx4927_pcicptr(dev->bus->sysdata) == tx4938_pcic1ptr) {
switch (slot) {
diff --git a/arch/mips/pci/pci-tx4939.c b/arch/mips/pci/pci-tx4939.c
new file mode 100644
index 00000000000..5fecf1cdc32
--- /dev/null
+++ b/arch/mips/pci/pci-tx4939.c
@@ -0,0 +1,109 @@
+/*
+ * linux/arch/mips/pci/pci-tx4939.c
+ *
+ * Based on linux/arch/mips/txx9/rbtx4939/setup.c,
+ * and RBTX49xx patch from CELF patch archive.
+ *
+ * Copyright 2001, 2003-2005 MontaVista Software Inc.
+ * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/tx4939.h>
+
+int __init tx4939_report_pciclk(void)
+{
+ int pciclk = 0;
+
+ pr_info("PCIC --%s PCICLK:",
+ (__raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_PCI66) ?
+ " PCI66" : "");
+ if (__raw_readq(&tx4939_ccfgptr->pcfg) & TX4939_PCFG_PCICLKEN_ALL) {
+ pciclk = txx9_master_clock * 20 / 6;
+ if (!(__raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_PCI66))
+ pciclk /= 2;
+ printk(KERN_CONT "Internal(%u.%uMHz)",
+ (pciclk + 50000) / 1000000,
+ ((pciclk + 50000) / 100000) % 10);
+ } else {
+ printk(KERN_CONT "External");
+ pciclk = -1;
+ }
+ printk(KERN_CONT "\n");
+ return pciclk;
+}
+
+void __init tx4939_report_pci1clk(void)
+{
+ unsigned int pciclk = txx9_master_clock * 20 / 6;
+
+ pr_info("PCIC1 -- PCICLK:%u.%uMHz\n",
+ (pciclk + 50000) / 1000000,
+ ((pciclk + 50000) / 100000) % 10);
+}
+
+int __init tx4939_pcic1_map_irq(const struct pci_dev *dev, u8 slot)
+{
+ if (get_tx4927_pcicptr(dev->bus->sysdata) == tx4939_pcic1ptr) {
+ switch (slot) {
+ case TX4927_PCIC_IDSEL_AD_TO_SLOT(31):
+ if (__raw_readq(&tx4939_ccfgptr->pcfg) &
+ TX4939_PCFG_ET0MODE)
+ return TXX9_IRQ_BASE + TX4939_IR_ETH(0);
+ break;
+ case TX4927_PCIC_IDSEL_AD_TO_SLOT(30):
+ if (__raw_readq(&tx4939_ccfgptr->pcfg) &
+ TX4939_PCFG_ET1MODE)
+ return TXX9_IRQ_BASE + TX4939_IR_ETH(1);
+ break;
+ }
+ return 0;
+ }
+ return -1;
+}
+
+int __init tx4939_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq = tx4939_pcic1_map_irq(dev, slot);
+
+ if (irq >= 0)
+ return irq;
+ irq = pin;
+ /* IRQ rotation */
+ irq--; /* 0-3 */
+ irq = (irq + 33 - slot) % 4;
+ irq++; /* 1-4 */
+
+ switch (irq) {
+ case 1:
+ irq = TXX9_IRQ_BASE + TX4939_IR_INTA;
+ break;
+ case 2:
+ irq = TXX9_IRQ_BASE + TX4939_IR_INTB;
+ break;
+ case 3:
+ irq = TXX9_IRQ_BASE + TX4939_IR_INTC;
+ break;
+ case 4:
+ irq = TXX9_IRQ_BASE + TX4939_IR_INTD;
+ break;
+ }
+ return irq;
+}
+
+void __init tx4939_setup_pcierr_irq(void)
+{
+ if (request_irq(TXX9_IRQ_BASE + TX4939_IR_PCIERR,
+ tx4927_pcierr_interrupt,
+ IRQF_DISABLED, "PCI error",
+ (void *)TX4939_PCIC_REG))
+ pr_warning("Failed to request irq for PCIERR\n");
+}
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index c7fe6ec621e..a377e9d2d02 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -34,6 +34,8 @@ static struct pci_controller *hose_head, **hose_tail = &hose_head;
unsigned long PCIBIOS_MIN_IO = 0x0000;
unsigned long PCIBIOS_MIN_MEM = 0;
+static int pci_initialized;
+
/*
* We need to avoid collisions with `mirrored' VGA ports
* and other strange ISA hardware, so we always want the
@@ -74,6 +76,42 @@ pcibios_align_resource(void *data, struct resource *res,
res->start = start;
}
+static void __devinit pcibios_scanbus(struct pci_controller *hose)
+{
+ static int next_busno;
+ static int need_domain_info;
+ struct pci_bus *bus;
+
+ if (!hose->iommu)
+ PCI_DMA_BUS_IS_PHYS = 1;
+
+ if (hose->get_busno && pci_probe_only)
+ next_busno = (*hose->get_busno)();
+
+ bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
+ hose->bus = bus;
+
+ need_domain_info = need_domain_info || hose->index;
+ hose->need_domain_info = need_domain_info;
+ if (bus) {
+ next_busno = bus->subordinate + 1;
+ /* Don't allow 8-bit bus number overflow inside the hose -
+ reserve some space for bridges. */
+ if (next_busno > 224) {
+ next_busno = 0;
+ need_domain_info = 1;
+ }
+
+ if (!pci_probe_only) {
+ pci_bus_size_bridges(bus);
+ pci_bus_assign_resources(bus);
+ pci_enable_bridges(bus);
+ }
+ }
+}
+
+static DEFINE_MUTEX(pci_scan_mutex);
+
void __devinit register_pci_controller(struct pci_controller *hose)
{
if (request_resource(&iomem_resource, hose->mem_resource) < 0)
@@ -93,6 +131,17 @@ void __devinit register_pci_controller(struct pci_controller *hose)
printk(KERN_WARNING
"registering PCI controller with io_map_base unset\n");
}
+
+ /*
+ * Scan the bus if it is register after the PCI subsystem
+ * initialization.
+ */
+ if (pci_initialized) {
+ mutex_lock(&pci_scan_mutex);
+ pcibios_scanbus(hose);
+ mutex_unlock(&pci_scan_mutex);
+ }
+
return;
out:
@@ -125,38 +174,15 @@ static u8 __init common_swizzle(struct pci_dev *dev, u8 *pinp)
static int __init pcibios_init(void)
{
struct pci_controller *hose;
- struct pci_bus *bus;
- int next_busno;
- int need_domain_info = 0;
/* Scan all of the recorded PCI controllers. */
- for (next_busno = 0, hose = hose_head; hose; hose = hose->next) {
-
- if (!hose->iommu)
- PCI_DMA_BUS_IS_PHYS = 1;
-
- if (hose->get_busno && pci_probe_only)
- next_busno = (*hose->get_busno)();
-
- bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
- hose->bus = bus;
- need_domain_info = need_domain_info || hose->index;
- hose->need_domain_info = need_domain_info;
- if (bus) {
- next_busno = bus->subordinate + 1;
- /* Don't allow 8-bit bus number overflow inside the hose -
- reserve some space for bridges. */
- if (next_busno > 224) {
- next_busno = 0;
- need_domain_info = 1;
- }
- }
- }
+ for (hose = hose_head; hose; hose = hose->next)
+ pcibios_scanbus(hose);
- if (!pci_probe_only)
- pci_assign_unassigned_resources();
pci_fixup_irqs(common_swizzle, pcibios_map_irq);
+ pci_initialized = 1;
+
return 0;
}
diff --git a/arch/mips/pmc-sierra/msp71xx/Makefile b/arch/mips/pmc-sierra/msp71xx/Makefile
index 4bba79c1cc7..e107f79b149 100644
--- a/arch/mips/pmc-sierra/msp71xx/Makefile
+++ b/arch/mips/pmc-sierra/msp71xx/Makefile
@@ -3,6 +3,7 @@
#
obj-y += msp_prom.o msp_setup.o msp_irq.o \
msp_time.o msp_serial.o msp_elb.o
+obj-$(CONFIG_HAVE_GPIO_LIB) += gpio.o gpio_extended.o
obj-$(CONFIG_PMC_MSP7120_GW) += msp_hwbutton.o
obj-$(CONFIG_IRQ_MSP_SLP) += msp_irq_slp.o
obj-$(CONFIG_IRQ_MSP_CIC) += msp_irq_cic.o
diff --git a/arch/mips/pmc-sierra/msp71xx/gpio.c b/arch/mips/pmc-sierra/msp71xx/gpio.c
new file mode 100644
index 00000000000..69848c5813e
--- /dev/null
+++ b/arch/mips/pmc-sierra/msp71xx/gpio.c
@@ -0,0 +1,218 @@
+/*
+ * @file /arch/mips/pmc-sierra/msp71xx/gpio.c
+ *
+ * Generic PMC MSP71xx GPIO handling. These base gpio are controlled by two
+ * types of registers. The data register sets the output level when in output
+ * mode and when in input mode will contain the value at the input. The config
+ * register sets the various modes for each gpio.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * @author Patrick Glass <patrickglass@gmail.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+
+#define MSP71XX_CFG_OFFSET(gpio) (4 * (gpio))
+#define CONF_MASK 0x0F
+#define MSP71XX_GPIO_INPUT 0x01
+#define MSP71XX_GPIO_OUTPUT 0x08
+
+#define MSP71XX_GPIO_BASE 0x0B8400000L
+
+#define to_msp71xx_gpio_chip(c) container_of(c, struct msp71xx_gpio_chip, chip)
+
+static spinlock_t gpio_lock;
+
+/*
+ * struct msp71xx_gpio_chip - container for gpio chip and registers
+ * @chip: chip structure for the specified gpio bank
+ * @data_reg: register for reading and writing the gpio pin value
+ * @config_reg: register to set the mode for the gpio pin bank
+ * @out_drive_reg: register to set the output drive mode for the gpio pin bank
+ */
+struct msp71xx_gpio_chip {
+ struct gpio_chip chip;
+ void __iomem *data_reg;
+ void __iomem *config_reg;
+ void __iomem *out_drive_reg;
+};
+
+/*
+ * msp71xx_gpio_get() - return the chip's gpio value
+ * @chip: chip structure which controls the specified gpio
+ * @offset: gpio whose value will be returned
+ *
+ * It will return 0 if gpio value is low and other if high.
+ */
+static int msp71xx_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct msp71xx_gpio_chip *msp_chip = to_msp71xx_gpio_chip(chip);
+
+ return __raw_readl(msp_chip->data_reg) & (1 << offset);
+}
+
+/*
+ * msp71xx_gpio_set() - set the output value for the gpio
+ * @chip: chip structure who controls the specified gpio
+ * @offset: gpio whose value will be assigned
+ * @value: logic level to assign to the gpio initially
+ *
+ * This will set the gpio bit specified to the desired value. It will set the
+ * gpio pin low if value is 0 otherwise it will be high.
+ */
+static void msp71xx_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct msp71xx_gpio_chip *msp_chip = to_msp71xx_gpio_chip(chip);
+ unsigned long flags;
+ u32 data;
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ data = __raw_readl(msp_chip->data_reg);
+ if (value)
+ data |= (1 << offset);
+ else
+ data &= ~(1 << offset);
+ __raw_writel(data, msp_chip->data_reg);
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+}
+
+/*
+ * msp71xx_set_gpio_mode() - declare the mode for a gpio
+ * @chip: chip structure which controls the specified gpio
+ * @offset: gpio whose value will be assigned
+ * @mode: desired configuration for the gpio (see datasheet)
+ *
+ * It will set the gpio pin config to the @mode value passed in.
+ */
+static int msp71xx_set_gpio_mode(struct gpio_chip *chip,
+ unsigned offset, int mode)
+{
+ struct msp71xx_gpio_chip *msp_chip = to_msp71xx_gpio_chip(chip);
+ const unsigned bit_offset = MSP71XX_CFG_OFFSET(offset);
+ unsigned long flags;
+ u32 cfg;
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ cfg = __raw_readl(msp_chip->config_reg);
+ cfg &= ~(CONF_MASK << bit_offset);
+ cfg |= (mode << bit_offset);
+ __raw_writel(cfg, msp_chip->config_reg);
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+
+ return 0;
+}
+
+/*
+ * msp71xx_direction_output() - declare the direction mode for a gpio
+ * @chip: chip structure which controls the specified gpio
+ * @offset: gpio whose value will be assigned
+ * @value: logic level to assign to the gpio initially
+ *
+ * This call will set the mode for the @gpio to output. It will set the
+ * gpio pin low if value is 0 otherwise it will be high.
+ */
+static int msp71xx_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ msp71xx_gpio_set(chip, offset, value);
+
+ return msp71xx_set_gpio_mode(chip, offset, MSP71XX_GPIO_OUTPUT);
+}
+
+/*
+ * msp71xx_direction_input() - declare the direction mode for a gpio
+ * @chip: chip structure which controls the specified gpio
+ * @offset: gpio whose to which the value will be assigned
+ *
+ * This call will set the mode for the @gpio to input.
+ */
+static int msp71xx_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ return msp71xx_set_gpio_mode(chip, offset, MSP71XX_GPIO_INPUT);
+}
+
+/*
+ * msp71xx_set_output_drive() - declare the output drive for the gpio line
+ * @gpio: gpio pin whose output drive you wish to modify
+ * @value: zero for active drain 1 for open drain drive
+ *
+ * This call will set the output drive mode for the @gpio to output.
+ */
+int msp71xx_set_output_drive(unsigned gpio, int value)
+{
+ unsigned long flags;
+ u32 data;
+
+ if (gpio > 15 || gpio < 0)
+ return -EINVAL;
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ data = __raw_readl((void __iomem *)(MSP71XX_GPIO_BASE + 0x190));
+ if (value)
+ data |= (1 << gpio);
+ else
+ data &= ~(1 << gpio);
+ __raw_writel(data, (void __iomem *)(MSP71XX_GPIO_BASE + 0x190));
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(msp71xx_set_output_drive);
+
+#define MSP71XX_GPIO_BANK(name, dr, cr, base_gpio, num_gpio) \
+{ \
+ .chip = { \
+ .label = name, \
+ .direction_input = msp71xx_direction_input, \
+ .direction_output = msp71xx_direction_output, \
+ .get = msp71xx_gpio_get, \
+ .set = msp71xx_gpio_set, \
+ .base = base_gpio, \
+ .ngpio = num_gpio \
+ }, \
+ .data_reg = (void __iomem *)(MSP71XX_GPIO_BASE + dr), \
+ .config_reg = (void __iomem *)(MSP71XX_GPIO_BASE + cr), \
+ .out_drive_reg = (void __iomem *)(MSP71XX_GPIO_BASE + 0x190), \
+}
+
+/*
+ * struct msp71xx_gpio_banks[] - container array of gpio banks
+ * @chip: chip structure for the specified gpio bank
+ * @data_reg: register for reading and writing the gpio pin value
+ * @config_reg: register to set the mode for the gpio pin bank
+ *
+ * This array structure defines the gpio banks for the PMC MIPS Processor.
+ * We specify the bank name, the data register, the config register, base
+ * starting gpio number, and the number of gpios exposed by the bank.
+ */
+static struct msp71xx_gpio_chip msp71xx_gpio_banks[] = {
+
+ MSP71XX_GPIO_BANK("GPIO_1_0", 0x170, 0x180, 0, 2),
+ MSP71XX_GPIO_BANK("GPIO_5_2", 0x174, 0x184, 2, 4),
+ MSP71XX_GPIO_BANK("GPIO_9_6", 0x178, 0x188, 6, 4),
+ MSP71XX_GPIO_BANK("GPIO_15_10", 0x17C, 0x18C, 10, 6),
+};
+
+void __init msp71xx_init_gpio(void)
+{
+ int i;
+
+ spin_lock_init(&gpio_lock);
+
+ for (i = 0; i < ARRAY_SIZE(msp71xx_gpio_banks); i++)
+ gpiochip_add(&msp71xx_gpio_banks[i].chip);
+}
diff --git a/arch/mips/pmc-sierra/msp71xx/gpio_extended.c b/arch/mips/pmc-sierra/msp71xx/gpio_extended.c
new file mode 100644
index 00000000000..fc6dbc6cf1c
--- /dev/null
+++ b/arch/mips/pmc-sierra/msp71xx/gpio_extended.c
@@ -0,0 +1,148 @@
+/*
+ * @file /arch/mips/pmc-sierra/msp71xx/gpio_extended.c
+ *
+ * Generic PMC MSP71xx EXTENDED (EXD) GPIO handling. The extended gpio is
+ * a set of hardware registers that have no need for explicit locking as
+ * it is handled by unique method of writing individual set/clr bits.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * @author Patrick Glass <patrickglass@gmail.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#define MSP71XX_DATA_OFFSET(gpio) (2 * (gpio))
+#define MSP71XX_READ_OFFSET(gpio) (MSP71XX_DATA_OFFSET(gpio) + 1)
+#define MSP71XX_CFG_OUT_OFFSET(gpio) (MSP71XX_DATA_OFFSET(gpio) + 16)
+#define MSP71XX_CFG_IN_OFFSET(gpio) (MSP71XX_CFG_OUT_OFFSET(gpio) + 1)
+
+#define MSP71XX_EXD_GPIO_BASE 0x0BC000000L
+
+#define to_msp71xx_exd_gpio_chip(c) \
+ container_of(c, struct msp71xx_exd_gpio_chip, chip)
+
+/*
+ * struct msp71xx_exd_gpio_chip - container for gpio chip and registers
+ * @chip: chip structure for the specified gpio bank
+ * @reg: register for control and data of gpio pin
+ */
+struct msp71xx_exd_gpio_chip {
+ struct gpio_chip chip;
+ void __iomem *reg;
+};
+
+/*
+ * msp71xx_exd_gpio_get() - return the chip's gpio value
+ * @chip: chip structure which controls the specified gpio
+ * @offset: gpio whose value will be returned
+ *
+ * It will return 0 if gpio value is low and other if high.
+ */
+static int msp71xx_exd_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct msp71xx_exd_gpio_chip *msp71xx_chip =
+ to_msp71xx_exd_gpio_chip(chip);
+ const unsigned bit = MSP71XX_READ_OFFSET(offset);
+
+ return __raw_readl(msp71xx_chip->reg) & (1 << bit);
+}
+
+/*
+ * msp71xx_exd_gpio_set() - set the output value for the gpio
+ * @chip: chip structure who controls the specified gpio
+ * @offset: gpio whose value will be assigned
+ * @value: logic level to assign to the gpio initially
+ *
+ * This will set the gpio bit specified to the desired value. It will set the
+ * gpio pin low if value is 0 otherwise it will be high.
+ */
+static void msp71xx_exd_gpio_set(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct msp71xx_exd_gpio_chip *msp71xx_chip =
+ to_msp71xx_exd_gpio_chip(chip);
+ const unsigned bit = MSP71XX_DATA_OFFSET(offset);
+
+ __raw_writel(1 << (bit + (value ? 1 : 0)), msp71xx_chip->reg);
+}
+
+/*
+ * msp71xx_exd_direction_output() - declare the direction mode for a gpio
+ * @chip: chip structure which controls the specified gpio
+ * @offset: gpio whose value will be assigned
+ * @value: logic level to assign to the gpio initially
+ *
+ * This call will set the mode for the @gpio to output. It will set the
+ * gpio pin low if value is 0 otherwise it will be high.
+ */
+static int msp71xx_exd_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct msp71xx_exd_gpio_chip *msp71xx_chip =
+ to_msp71xx_exd_gpio_chip(chip);
+
+ msp71xx_exd_gpio_set(chip, offset, value);
+ __raw_writel(1 << MSP71XX_CFG_OUT_OFFSET(offset), msp71xx_chip->reg);
+ return 0;
+}
+
+/*
+ * msp71xx_exd_direction_input() - declare the direction mode for a gpio
+ * @chip: chip structure which controls the specified gpio
+ * @offset: gpio whose to which the value will be assigned
+ *
+ * This call will set the mode for the @gpio to input.
+ */
+static int msp71xx_exd_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct msp71xx_exd_gpio_chip *msp71xx_chip =
+ to_msp71xx_exd_gpio_chip(chip);
+
+ __raw_writel(1 << MSP71XX_CFG_IN_OFFSET(offset), msp71xx_chip->reg);
+ return 0;
+}
+
+#define MSP71XX_EXD_GPIO_BANK(name, exd_reg, base_gpio, num_gpio) \
+{ \
+ .chip = { \
+ .label = name, \
+ .direction_input = msp71xx_exd_direction_input, \
+ .direction_output = msp71xx_exd_direction_output, \
+ .get = msp71xx_exd_gpio_get, \
+ .set = msp71xx_exd_gpio_set, \
+ .base = base_gpio, \
+ .ngpio = num_gpio, \
+ }, \
+ .reg = (void __iomem *)(MSP71XX_EXD_GPIO_BASE + exd_reg), \
+}
+
+/*
+ * struct msp71xx_exd_gpio_banks[] - container array of gpio banks
+ * @chip: chip structure for the specified gpio bank
+ * @reg: register for reading and writing the gpio pin value
+ *
+ * This array structure defines the extended gpio banks for the
+ * PMC MIPS Processor. We specify the bank name, the data/config
+ * register,the base starting gpio number, and the number of
+ * gpios exposed by the bank of gpios.
+ */
+static struct msp71xx_exd_gpio_chip msp71xx_exd_gpio_banks[] = {
+
+ MSP71XX_EXD_GPIO_BANK("GPIO_23_16", 0x188, 16, 8),
+ MSP71XX_EXD_GPIO_BANK("GPIO_27_24", 0x18C, 24, 4),
+};
+
+void __init msp71xx_init_gpio_extended(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(msp71xx_exd_gpio_banks); i++)
+ gpiochip_add(&msp71xx_exd_gpio_banks[i].chip);
+}
diff --git a/arch/mips/pmc-sierra/yosemite/setup.c b/arch/mips/pmc-sierra/yosemite/setup.c
index 6537d90a25b..2d3c0dca275 100644
--- a/arch/mips/pmc-sierra/yosemite/setup.c
+++ b/arch/mips/pmc-sierra/yosemite/setup.c
@@ -79,14 +79,14 @@ unsigned long read_persistent_clock(void)
/* Stop the update to the time */
m48t37_base->control = 0x40;
- year = BCD2BIN(m48t37_base->year);
- year += BCD2BIN(m48t37_base->century) * 100;
+ year = bcd2bin(m48t37_base->year);
+ year += bcd2bin(m48t37_base->century) * 100;
- month = BCD2BIN(m48t37_base->month);
- day = BCD2BIN(m48t37_base->date);
- hour = BCD2BIN(m48t37_base->hour);
- min = BCD2BIN(m48t37_base->min);
- sec = BCD2BIN(m48t37_base->sec);
+ month = bcd2bin(m48t37_base->month);
+ day = bcd2bin(m48t37_base->date);
+ hour = bcd2bin(m48t37_base->hour);
+ min = bcd2bin(m48t37_base->min);
+ sec = bcd2bin(m48t37_base->sec);
/* Start the update to the time again */
m48t37_base->control = 0x00;
@@ -113,22 +113,22 @@ int rtc_mips_set_time(unsigned long tim)
m48t37_base->control = 0x80;
/* year */
- m48t37_base->year = BIN2BCD(tm.tm_year % 100);
- m48t37_base->century = BIN2BCD(tm.tm_year / 100);
+ m48t37_base->year = bin2bcd(tm.tm_year % 100);
+ m48t37_base->century = bin2bcd(tm.tm_year / 100);
/* month */
- m48t37_base->month = BIN2BCD(tm.tm_mon);
+ m48t37_base->month = bin2bcd(tm.tm_mon);
/* day */
- m48t37_base->date = BIN2BCD(tm.tm_mday);
+ m48t37_base->date = bin2bcd(tm.tm_mday);
/* hour/min/sec */
- m48t37_base->hour = BIN2BCD(tm.tm_hour);
- m48t37_base->min = BIN2BCD(tm.tm_min);
- m48t37_base->sec = BIN2BCD(tm.tm_sec);
+ m48t37_base->hour = bin2bcd(tm.tm_hour);
+ m48t37_base->min = bin2bcd(tm.tm_min);
+ m48t37_base->sec = bin2bcd(tm.tm_sec);
/* day of week -- not really used, but let's keep it up-to-date */
- m48t37_base->day = BIN2BCD(tm.tm_wday + 1);
+ m48t37_base->day = bin2bcd(tm.tm_wday + 1);
/* disable writing */
m48t37_base->control = 0x00;
diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
index 82ab395efa3..31619c601b1 100644
--- a/arch/mips/rb532/devices.c
+++ b/arch/mips/rb532/devices.c
@@ -34,21 +34,11 @@
#include <asm/mach-rc32434/rb.h>
#include <asm/mach-rc32434/integ.h>
#include <asm/mach-rc32434/gpio.h>
-
-#define ETH0_DMA_RX_IRQ (GROUP1_IRQ_BASE + 0)
-#define ETH0_DMA_TX_IRQ (GROUP1_IRQ_BASE + 1)
-#define ETH0_RX_OVR_IRQ (GROUP3_IRQ_BASE + 9)
-#define ETH0_TX_UND_IRQ (GROUP3_IRQ_BASE + 10)
+#include <asm/mach-rc32434/irq.h>
#define ETH0_RX_DMA_ADDR (DMA0_BASE_ADDR + 0 * DMA_CHAN_OFFSET)
#define ETH0_TX_DMA_ADDR (DMA0_BASE_ADDR + 1 * DMA_CHAN_OFFSET)
-/* NAND definitions */
-#define GPIO_RDY (1 << 0x08)
-#define GPIO_WPX (1 << 0x09)
-#define GPIO_ALE (1 << 0x0a)
-#define GPIO_CLE (1 << 0x0b)
-
static struct resource korina_dev0_res[] = {
{
.name = "korina_regs",
@@ -94,15 +84,13 @@ static struct korina_device korina_dev0_data = {
};
static struct platform_device korina_dev0 = {
- .id = 0,
+ .id = -1,
.name = "korina",
.dev.platform_data = &korina_dev0_data,
.resource = korina_dev0_res,
.num_resources = ARRAY_SIZE(korina_dev0_res),
};
-#define CF_GPIO_NUM 13
-
static struct resource cf_slot0_res[] = {
{
.name = "cf_membase",
@@ -116,11 +104,11 @@ static struct resource cf_slot0_res[] = {
};
static struct cf_device cf_slot0_data = {
- .gpio_pin = 13
+ .gpio_pin = CF_GPIO_NUM
};
static struct platform_device cf_slot0 = {
- .id = 0,
+ .id = -1,
.name = "pata-rb532-cf",
.dev.platform_data = &cf_slot0_data,
.resource = cf_slot0_res,
@@ -185,7 +173,7 @@ static struct mtd_partition rb532_partition_info[] = {
static struct platform_device rb532_led = {
.name = "rb532-led",
- .id = 0,
+ .id = -1,
};
static struct gpio_keys_button rb532_gpio_btn[] = {
diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
index 00a1c7877bf..76a7fd96d56 100644
--- a/arch/mips/rb532/gpio.c
+++ b/arch/mips/rb532/gpio.c
@@ -27,28 +27,31 @@
*/
#include <linux/kernel.h>
-#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/types.h>
-#include <linux/pci.h>
#include <linux/spinlock.h>
-#include <linux/io.h>
#include <linux/platform_device.h>
-
-#include <asm/addrspace.h>
+#include <linux/gpio.h>
#include <asm/mach-rc32434/rb.h>
-
-struct rb532_gpio_reg __iomem *rb532_gpio_reg0;
-EXPORT_SYMBOL(rb532_gpio_reg0);
+#include <asm/mach-rc32434/gpio.h>
+
+struct rb532_gpio_chip {
+ struct gpio_chip chip;
+ void __iomem *regbase;
+ void (*set_int_level)(struct gpio_chip *chip, unsigned offset, int value);
+ int (*get_int_level)(struct gpio_chip *chip, unsigned offset);
+ void (*set_int_status)(struct gpio_chip *chip, unsigned offset, int value);
+ int (*get_int_status)(struct gpio_chip *chip, unsigned offset);
+};
struct mpmc_device dev3;
static struct resource rb532_gpio_reg0_res[] = {
{
.name = "gpio_reg0",
- .start = (u32)(IDT434_REG_BASE + GPIOBASE),
- .end = (u32)(IDT434_REG_BASE + GPIOBASE + sizeof(struct rb532_gpio_reg)),
+ .start = REGBASE + GPIOBASE,
+ .end = REGBASE + GPIOBASE + sizeof(struct rb532_gpio_reg) - 1,
.flags = IORESOURCE_MEM,
}
};
@@ -56,8 +59,8 @@ static struct resource rb532_gpio_reg0_res[] = {
static struct resource rb532_dev3_ctl_res[] = {
{
.name = "dev3_ctl",
- .start = (u32)(IDT434_REG_BASE + DEV3BASE),
- .end = (u32)(IDT434_REG_BASE + DEV3BASE + sizeof(struct dev_reg)),
+ .start = REGBASE + DEV3BASE,
+ .end = REGBASE + DEV3BASE + sizeof(struct dev_reg) - 1,
.flags = IORESOURCE_MEM,
}
};
@@ -70,7 +73,7 @@ void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val)
spin_lock_irqsave(&dev3.lock, flags);
- data = *(volatile unsigned *) (IDT434_REG_BASE + reg_offs);
+ data = readl(IDT434_REG_BASE + reg_offs);
for (i = 0; i != len; ++i) {
if (val & (1 << i))
data |= (1 << (i + bit));
@@ -108,108 +111,199 @@ unsigned char get_latch_u5(void)
}
EXPORT_SYMBOL(get_latch_u5);
-int rb532_gpio_get_value(unsigned gpio)
+/*
+ * Return GPIO level */
+static int rb532_gpio_get(struct gpio_chip *chip, unsigned offset)
{
- return readl(&rb532_gpio_reg0->gpiod) & (1 << gpio);
+ u32 mask = 1 << offset;
+ struct rb532_gpio_chip *gpch;
+
+ gpch = container_of(chip, struct rb532_gpio_chip, chip);
+ return readl(gpch->regbase + GPIOD) & mask;
}
-EXPORT_SYMBOL(rb532_gpio_get_value);
-void rb532_gpio_set_value(unsigned gpio, int value)
+/*
+ * Set output GPIO level
+ */
+static void rb532_gpio_set(struct gpio_chip *chip,
+ unsigned offset, int value)
{
- unsigned tmp;
+ unsigned long flags;
+ u32 mask = 1 << offset;
+ u32 tmp;
+ struct rb532_gpio_chip *gpch;
+ void __iomem *gpvr;
- tmp = readl(&rb532_gpio_reg0->gpiod) & ~(1 << gpio);
- if (value)
- tmp |= 1 << gpio;
+ gpch = container_of(chip, struct rb532_gpio_chip, chip);
+ gpvr = gpch->regbase + GPIOD;
- writel(tmp, (void *)&rb532_gpio_reg0->gpiod);
+ local_irq_save(flags);
+ tmp = readl(gpvr);
+ if (value)
+ tmp |= mask;
+ else
+ tmp &= ~mask;
+ writel(tmp, gpvr);
+ local_irq_restore(flags);
}
-EXPORT_SYMBOL(rb532_gpio_set_value);
-int rb532_gpio_direction_input(unsigned gpio)
+/*
+ * Set GPIO direction to input
+ */
+static int rb532_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
- writel(readl(&rb532_gpio_reg0->gpiocfg) & ~(1 << gpio),
- (void *)&rb532_gpio_reg0->gpiocfg);
+ unsigned long flags;
+ u32 mask = 1 << offset;
+ u32 value;
+ struct rb532_gpio_chip *gpch;
+ void __iomem *gpdr;
- return 0;
-}
-EXPORT_SYMBOL(rb532_gpio_direction_input);
+ gpch = container_of(chip, struct rb532_gpio_chip, chip);
+ gpdr = gpch->regbase + GPIOCFG;
-int rb532_gpio_direction_output(unsigned gpio, int value)
-{
- gpio_set_value(gpio, value);
- writel(readl(&rb532_gpio_reg0->gpiocfg) | (1 << gpio),
- (void *)&rb532_gpio_reg0->gpiocfg);
+ local_irq_save(flags);
+ value = readl(gpdr);
+ value &= ~mask;
+ writel(value, gpdr);
+ local_irq_restore(flags);
return 0;
}
-EXPORT_SYMBOL(rb532_gpio_direction_output);
-void rb532_gpio_set_int_level(unsigned gpio, int value)
+/*
+ * Set GPIO direction to output
+ */
+static int rb532_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
{
- unsigned tmp;
+ unsigned long flags;
+ u32 mask = 1 << offset;
+ u32 tmp;
+ struct rb532_gpio_chip *gpch;
+ void __iomem *gpdr;
+
+ gpch = container_of(chip, struct rb532_gpio_chip, chip);
+ writel(mask, gpch->regbase + GPIOD);
+ gpdr = gpch->regbase + GPIOCFG;
+
+ local_irq_save(flags);
+ tmp = readl(gpdr);
+ tmp |= mask;
+ writel(tmp, gpdr);
+ local_irq_restore(flags);
- tmp = readl(&rb532_gpio_reg0->gpioilevel) & ~(1 << gpio);
- if (value)
- tmp |= 1 << gpio;
- writel(tmp, (void *)&rb532_gpio_reg0->gpioilevel);
+ return 0;
}
-EXPORT_SYMBOL(rb532_gpio_set_int_level);
-int rb532_gpio_get_int_level(unsigned gpio)
+/*
+ * Set the GPIO interrupt level
+ */
+static void rb532_gpio_set_int_level(struct gpio_chip *chip,
+ unsigned offset, int value)
{
- return readl(&rb532_gpio_reg0->gpioilevel) & (1 << gpio);
-}
-EXPORT_SYMBOL(rb532_gpio_get_int_level);
+ unsigned long flags;
+ u32 mask = 1 << offset;
+ u32 tmp;
+ struct rb532_gpio_chip *gpch;
+ void __iomem *gpil;
-void rb532_gpio_set_int_status(unsigned gpio, int value)
-{
- unsigned tmp;
+ gpch = container_of(chip, struct rb532_gpio_chip, chip);
+ gpil = gpch->regbase + GPIOILEVEL;
- tmp = readl(&rb532_gpio_reg0->gpioistat);
+ local_irq_save(flags);
+ tmp = readl(gpil);
if (value)
- tmp |= 1 << gpio;
- writel(tmp, (void *)&rb532_gpio_reg0->gpioistat);
+ tmp |= mask;
+ else
+ tmp &= ~mask;
+ writel(tmp, gpil);
+ local_irq_restore(flags);
}
-EXPORT_SYMBOL(rb532_gpio_set_int_status);
-int rb532_gpio_get_int_status(unsigned gpio)
+/*
+ * Get the GPIO interrupt level
+ */
+static int rb532_gpio_get_int_level(struct gpio_chip *chip, unsigned offset)
{
- return readl(&rb532_gpio_reg0->gpioistat) & (1 << gpio);
+ u32 mask = 1 << offset;
+ struct rb532_gpio_chip *gpch;
+
+ gpch = container_of(chip, struct rb532_gpio_chip, chip);
+ return readl(gpch->regbase + GPIOILEVEL) & mask;
}
-EXPORT_SYMBOL(rb532_gpio_get_int_status);
-void rb532_gpio_set_func(unsigned gpio, int value)
+/*
+ * Set the GPIO interrupt status
+ */
+static void rb532_gpio_set_int_status(struct gpio_chip *chip,
+ unsigned offset, int value)
{
- unsigned tmp;
+ unsigned long flags;
+ u32 mask = 1 << offset;
+ u32 tmp;
+ struct rb532_gpio_chip *gpch;
+ void __iomem *gpis;
+
+ gpch = container_of(chip, struct rb532_gpio_chip, chip);
+ gpis = gpch->regbase + GPIOISTAT;
- tmp = readl(&rb532_gpio_reg0->gpiofunc);
+ local_irq_save(flags);
+ tmp = readl(gpis);
if (value)
- tmp |= 1 << gpio;
- writel(tmp, (void *)&rb532_gpio_reg0->gpiofunc);
+ tmp |= mask;
+ else
+ tmp &= ~mask;
+ writel(tmp, gpis);
+ local_irq_restore(flags);
}
-EXPORT_SYMBOL(rb532_gpio_set_func);
-int rb532_gpio_get_func(unsigned gpio)
+/*
+ * Get the GPIO interrupt status
+ */
+static int rb532_gpio_get_int_status(struct gpio_chip *chip, unsigned offset)
{
- return readl(&rb532_gpio_reg0->gpiofunc) & (1 << gpio);
+ u32 mask = 1 << offset;
+ struct rb532_gpio_chip *gpch;
+
+ gpch = container_of(chip, struct rb532_gpio_chip, chip);
+ return readl(gpch->regbase + GPIOISTAT) & mask;
}
-EXPORT_SYMBOL(rb532_gpio_get_func);
+
+static struct rb532_gpio_chip rb532_gpio_chip[] = {
+ [0] = {
+ .chip = {
+ .label = "gpio0",
+ .direction_input = rb532_gpio_direction_input,
+ .direction_output = rb532_gpio_direction_output,
+ .get = rb532_gpio_get,
+ .set = rb532_gpio_set,
+ .base = 0,
+ .ngpio = 32,
+ },
+ .get_int_level = rb532_gpio_get_int_level,
+ .set_int_level = rb532_gpio_set_int_level,
+ .get_int_status = rb532_gpio_get_int_status,
+ .set_int_status = rb532_gpio_set_int_status,
+ },
+};
int __init rb532_gpio_init(void)
{
- rb532_gpio_reg0 = ioremap_nocache(rb532_gpio_reg0_res[0].start,
- rb532_gpio_reg0_res[0].end -
- rb532_gpio_reg0_res[0].start);
+ struct resource *r;
- if (!rb532_gpio_reg0) {
+ r = rb532_gpio_reg0_res;
+ rb532_gpio_chip->regbase = ioremap_nocache(r->start, r->end - r->start);
+
+ if (!rb532_gpio_chip->regbase) {
printk(KERN_ERR "rb532: cannot remap GPIO register 0\n");
return -ENXIO;
}
- dev3.base = ioremap_nocache(rb532_dev3_ctl_res[0].start,
- rb532_dev3_ctl_res[0].end -
- rb532_dev3_ctl_res[0].start);
+ /* Register our GPIO chip */
+ gpiochip_add(&rb532_gpio_chip->chip);
+
+ r = rb532_dev3_ctl_res;
+ dev3.base = ioremap_nocache(r->start, r->end - r->start);
if (!dev3.base) {
printk(KERN_ERR "rb532: cannot remap device controller 3\n");
diff --git a/arch/mips/rb532/irq.c b/arch/mips/rb532/irq.c
index c0d0f950caf..549b46d2fce 100644
--- a/arch/mips/rb532/irq.c
+++ b/arch/mips/rb532/irq.c
@@ -45,7 +45,7 @@
#include <asm/mipsregs.h>
#include <asm/system.h>
-#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/irq.h>
struct intr_group {
u32 mask; /* mask of valid bits in pending/mask registers */
diff --git a/arch/mips/rb532/prom.c b/arch/mips/rb532/prom.c
index 1bc0af8febf..46ca24dbcc2 100644
--- a/arch/mips/rb532/prom.c
+++ b/arch/mips/rb532/prom.c
@@ -37,12 +37,8 @@
#include <asm/mach-rc32434/ddr.h>
#include <asm/mach-rc32434/prom.h>
-extern void __init setup_serial_port(void);
-
unsigned int idt_cpu_freq = 132000000;
EXPORT_SYMBOL(idt_cpu_freq);
-unsigned int gpio_bootup_state;
-EXPORT_SYMBOL(gpio_bootup_state);
static struct resource ddr_reg[] = {
{
@@ -108,9 +104,6 @@ void __init prom_setup_cmdline(void)
mips_machtype = MACH_MIKROTIK_RB532;
}
- if (match_tag(prom_argv[i], GPIO_TAG))
- gpio_bootup_state = tag2ul(prom_argv[i], GPIO_TAG);
-
strcpy(cp, prom_argv[i]);
cp += strlen(prom_argv[i]);
}
@@ -122,11 +115,6 @@ void __init prom_setup_cmdline(void)
strcpy(cp, arcs_cmdline);
cp += strlen(arcs_cmdline);
}
- if (gpio_bootup_state & 0x02)
- strcpy(cp, GPIO_INIT_NOBUTTON);
- else
- strcpy(cp, GPIO_INIT_BUTTON);
-
cmd_line[CL_SIZE-1] = '\0';
strcpy(arcs_cmdline, cmd_line);
diff --git a/arch/mips/rb532/serial.c b/arch/mips/rb532/serial.c
index 1a05b5ddee0..3e0d7ec3a57 100644
--- a/arch/mips/rb532/serial.c
+++ b/arch/mips/rb532/serial.c
@@ -31,16 +31,16 @@
#include <linux/serial_8250.h>
#include <asm/serial.h>
-#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/rb.h>
extern unsigned int idt_cpu_freq;
static struct uart_port rb532_uart = {
.type = PORT_16550A,
.line = 0,
- .irq = RC32434_UART0_IRQ,
+ .irq = UART0_IRQ,
.iotype = UPIO_MEM,
- .membase = (char *)KSEG1ADDR(RC32434_UART0_BASE),
+ .membase = (char *)KSEG1ADDR(REGBASE + UART0BASE),
.regshift = 2
};
diff --git a/arch/mips/rb532/setup.c b/arch/mips/rb532/setup.c
index 7aafa95ac20..50f530f5b60 100644
--- a/arch/mips/rb532/setup.c
+++ b/arch/mips/rb532/setup.c
@@ -9,7 +9,7 @@
#include <asm/time.h>
#include <linux/ioport.h>
-#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/rb.h>
#include <asm/mach-rc32434/pci.h>
struct pci_reg __iomem *pci_reg;
@@ -27,7 +27,7 @@ static struct resource pci0_res[] = {
static void rb_machine_restart(char *command)
{
/* just jump to the reset vector */
- writel(0x80000001, (void *)KSEG1ADDR(RC32434_REG_BASE + RC32434_RST));
+ writel(0x80000001, IDT434_REG_BASE + RST);
((void (*)(void)) KSEG1ADDR(0x1FC00000u))();
}
diff --git a/arch/mips/rb532/time.c b/arch/mips/rb532/time.c
index 8e7a46855b5..1377d599f0e 100644
--- a/arch/mips/rb532/time.c
+++ b/arch/mips/rb532/time.c
@@ -28,7 +28,6 @@
#include <linux/timex.h>
#include <asm/mipsregs.h>
-#include <asm/debug.h>
#include <asm/time.h>
#include <asm/mach-rc32434/rc32434.h>
diff --git a/arch/mips/sgi-ip22/ip22-platform.c b/arch/mips/sgi-ip22/ip22-platform.c
index 52486c4d2b0..deddbf0ebe5 100644
--- a/arch/mips/sgi-ip22/ip22-platform.c
+++ b/arch/mips/sgi-ip22/ip22-platform.c
@@ -192,3 +192,18 @@ static int __init sgi_button_devinit(void)
}
device_initcall(sgi_button_devinit);
+
+static int __init sgi_ds1286_devinit(void)
+{
+ struct resource res;
+
+ memset(&res, 0, sizeof(res));
+ res.start = HPC3_CHIP0_BASE + offsetof(struct hpc3_regs, rtcregs);
+ res.end = res.start + sizeof(hpc3c0->rtcregs) - 1;
+ res.flags = IORESOURCE_MEM;
+
+ return IS_ERR(platform_device_register_simple("rtc-ds1286", -1,
+ &res, 1));
+}
+
+device_initcall(sgi_ds1286_devinit);
diff --git a/arch/mips/sgi-ip22/ip22-setup.c b/arch/mips/sgi-ip22/ip22-setup.c
index 896a1ef8482..b9a931358e2 100644
--- a/arch/mips/sgi-ip22/ip22-setup.c
+++ b/arch/mips/sgi-ip22/ip22-setup.c
@@ -4,7 +4,6 @@
* Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
* Copyright (C) 1997, 1998 Ralf Baechle (ralf@gnu.org)
*/
-#include <linux/ds1286.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/kdev_t.h>
diff --git a/arch/mips/sgi-ip22/ip22-time.c b/arch/mips/sgi-ip22/ip22-time.c
index 10e50549165..3dcb27ec0c5 100644
--- a/arch/mips/sgi-ip22/ip22-time.c
+++ b/arch/mips/sgi-ip22/ip22-time.c
@@ -10,7 +10,6 @@
* Copyright (C) 2003, 06 Ralf Baechle (ralf@linux-mips.org)
*/
#include <linux/bcd.h>
-#include <linux/ds1286.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/kernel.h>
@@ -29,69 +28,6 @@
#include <asm/sgi/hpc3.h>
#include <asm/sgi/ip22.h>
-/*
- * Note that mktime uses month from 1 to 12 while rtc_time_to_tm
- * uses 0 to 11.
- */
-unsigned long read_persistent_clock(void)
-{
- unsigned int yrs, mon, day, hrs, min, sec;
- unsigned int save_control;
- unsigned long flags;
-
- spin_lock_irqsave(&rtc_lock, flags);
- save_control = hpc3c0->rtcregs[RTC_CMD] & 0xff;
- hpc3c0->rtcregs[RTC_CMD] = save_control | RTC_TE;
-
- sec = BCD2BIN(hpc3c0->rtcregs[RTC_SECONDS] & 0xff);
- min = BCD2BIN(hpc3c0->rtcregs[RTC_MINUTES] & 0xff);
- hrs = BCD2BIN(hpc3c0->rtcregs[RTC_HOURS] & 0x3f);
- day = BCD2BIN(hpc3c0->rtcregs[RTC_DATE] & 0xff);
- mon = BCD2BIN(hpc3c0->rtcregs[RTC_MONTH] & 0x1f);
- yrs = BCD2BIN(hpc3c0->rtcregs[RTC_YEAR] & 0xff);
-
- hpc3c0->rtcregs[RTC_CMD] = save_control;
- spin_unlock_irqrestore(&rtc_lock, flags);
-
- if (yrs < 45)
- yrs += 30;
- if ((yrs += 40) < 70)
- yrs += 100;
-
- return mktime(yrs + 1900, mon, day, hrs, min, sec);
-}
-
-int rtc_mips_set_time(unsigned long tim)
-{
- struct rtc_time tm;
- unsigned int save_control;
- unsigned long flags;
-
- rtc_time_to_tm(tim, &tm);
-
- tm.tm_mon += 1; /* tm_mon starts at zero */
- tm.tm_year -= 40;
- if (tm.tm_year >= 100)
- tm.tm_year -= 100;
-
- spin_lock_irqsave(&rtc_lock, flags);
- save_control = hpc3c0->rtcregs[RTC_CMD] & 0xff;
- hpc3c0->rtcregs[RTC_CMD] = save_control | RTC_TE;
-
- hpc3c0->rtcregs[RTC_YEAR] = BIN2BCD(tm.tm_year);
- hpc3c0->rtcregs[RTC_MONTH] = BIN2BCD(tm.tm_mon);
- hpc3c0->rtcregs[RTC_DATE] = BIN2BCD(tm.tm_mday);
- hpc3c0->rtcregs[RTC_HOURS] = BIN2BCD(tm.tm_hour);
- hpc3c0->rtcregs[RTC_MINUTES] = BIN2BCD(tm.tm_min);
- hpc3c0->rtcregs[RTC_SECONDS] = BIN2BCD(tm.tm_sec);
- hpc3c0->rtcregs[RTC_HUNDREDTH_SECOND] = 0;
-
- hpc3c0->rtcregs[RTC_CMD] = save_control;
- spin_unlock_irqrestore(&rtc_lock, flags);
-
- return 0;
-}
-
static unsigned long dosample(void)
{
u32 ct0, ct1;
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index 8b4e854af92..1327c2746fb 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -13,12 +13,12 @@
#include <linux/time.h>
#include <linux/timex.h>
#include <linux/mm.h>
+#include <linux/platform_device.h>
#include <asm/time.h>
#include <asm/pgtable.h>
#include <asm/sgialib.h>
#include <asm/sn/ioc3.h>
-#include <asm/m48t35.h>
#include <asm/sn/klconfig.h>
#include <asm/sn/arch.h>
#include <asm/sn/addrs.h>
@@ -28,51 +28,6 @@
#define TICK_SIZE (tick_nsec / 1000)
-#if 0
-static int set_rtc_mmss(unsigned long nowtime)
-{
- int retval = 0;
- int real_seconds, real_minutes, cmos_minutes;
- struct m48t35_rtc *rtc;
- nasid_t nid;
-
- nid = get_nasid();
- rtc = (struct m48t35_rtc *)(KL_CONFIG_CH_CONS_INFO(nid)->memory_base +
- IOC3_BYTEBUS_DEV0);
-
- rtc->control |= M48T35_RTC_READ;
- cmos_minutes = BCD2BIN(rtc->min);
- rtc->control &= ~M48T35_RTC_READ;
-
- /*
- * Since we're only adjusting minutes and seconds, don't interfere with
- * hour overflow. This avoids messing with unknown time zones but
- * requires your RTC not to be off by more than 15 minutes
- */
- real_seconds = nowtime % 60;
- real_minutes = nowtime / 60;
- if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
- real_minutes += 30; /* correct for half hour time zone */
- real_minutes %= 60;
-
- if (abs(real_minutes - cmos_minutes) < 30) {
- real_seconds = BIN2BCD(real_seconds);
- real_minutes = BIN2BCD(real_minutes);
- rtc->control |= M48T35_RTC_SET;
- rtc->sec = real_seconds;
- rtc->min = real_minutes;
- rtc->control &= ~M48T35_RTC_SET;
- } else {
- printk(KERN_WARNING
- "set_rtc_mmss: can't update from %d to %d\n",
- cmos_minutes, real_minutes);
- retval = -1;
- }
-
- return retval;
-}
-#endif
-
/* Includes for ioc3_init(). */
#include <asm/sn/types.h>
#include <asm/sn/sn0/addrs.h>
@@ -80,37 +35,6 @@ static int set_rtc_mmss(unsigned long nowtime)
#include <asm/sn/sn0/hubio.h>
#include <asm/pci/bridge.h>
-unsigned long read_persistent_clock(void)
-{
- unsigned int year, month, date, hour, min, sec;
- struct m48t35_rtc *rtc;
- nasid_t nid;
-
- nid = get_nasid();
- rtc = (struct m48t35_rtc *)(KL_CONFIG_CH_CONS_INFO(nid)->memory_base +
- IOC3_BYTEBUS_DEV0);
-
- rtc->control |= M48T35_RTC_READ;
- sec = rtc->sec;
- min = rtc->min;
- hour = rtc->hour;
- date = rtc->date;
- month = rtc->month;
- year = rtc->year;
- rtc->control &= ~M48T35_RTC_READ;
-
- sec = BCD2BIN(sec);
- min = BCD2BIN(min);
- hour = BCD2BIN(hour);
- date = BCD2BIN(date);
- month = BCD2BIN(month);
- year = BCD2BIN(year);
-
- year += 1970;
-
- return mktime(year, month, date, hour, min, sec);
-}
-
static void enable_rt_irq(unsigned int irq)
{
}
@@ -286,6 +210,7 @@ void __cpuinit cpu_time_init(void)
void __cpuinit hub_rtc_init(cnodeid_t cnode)
{
+
/*
* We only need to initialize the current node.
* If this is not the current node then it is a cpuless
@@ -301,3 +226,23 @@ void __cpuinit hub_rtc_init(cnodeid_t cnode)
LOCAL_HUB_S(PI_RT_PEND_B, 0);
}
}
+
+static int __init sgi_ip27_rtc_devinit(void)
+{
+ struct resource res;
+
+ memset(&res, 0, sizeof(res));
+ res.start = XPHYSADDR(KL_CONFIG_CH_CONS_INFO(master_nasid)->memory_base +
+ IOC3_BYTEBUS_DEV0);
+ res.end = res.start + 32767;
+ res.flags = IORESOURCE_MEM;
+
+ return IS_ERR(platform_device_register_simple("rtc-m48t35", -1,
+ &res, 1));
+}
+
+/*
+ * kludge make this a device_initcall after ioc3 resource conflicts
+ * are resolved
+ */
+late_initcall(sgi_ip27_rtc_devinit);
diff --git a/arch/mips/sgi-ip32/ip32-platform.c b/arch/mips/sgi-ip32/ip32-platform.c
index 3d63721e0e8..511e9ff2acf 100644
--- a/arch/mips/sgi-ip32/ip32-platform.c
+++ b/arch/mips/sgi-ip32/ip32-platform.c
@@ -90,6 +90,22 @@ static __init int sgio2btns_devinit(void)
device_initcall(sgio2btns_devinit);
+static struct resource sgio2_cmos_rsrc[] = {
+ {
+ .start = 0x70,
+ .end = 0x71,
+ .flags = IORESOURCE_IO
+ }
+};
+
+static __init int sgio2_cmos_devinit(void)
+{
+ return IS_ERR(platform_device_register_simple("rtc_cmos", -1,
+ sgio2_cmos_rsrc, 1));
+}
+
+device_initcall(sgio2_cmos_devinit);
+
MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("8250 UART probe driver for SGI IP32 aka O2");
diff --git a/arch/mips/sgi-ip32/ip32-setup.c b/arch/mips/sgi-ip32/ip32-setup.c
index 1024bf40bd9..c5a5d4a31b4 100644
--- a/arch/mips/sgi-ip32/ip32-setup.c
+++ b/arch/mips/sgi-ip32/ip32-setup.c
@@ -62,11 +62,6 @@ static inline void str2eaddr(unsigned char *ea, unsigned char *str)
}
#endif
-unsigned long read_persistent_clock(void)
-{
- return mc146818_get_cmos_time();
-}
-
/* An arbitrary time; this can be decreased if reliability looks good */
#define WAIT_MS 10
diff --git a/arch/mips/sibyte/common/sb_tbprof.c b/arch/mips/sibyte/common/sb_tbprof.c
index 66e3e3fb311..637a194e5cd 100644
--- a/arch/mips/sibyte/common/sb_tbprof.c
+++ b/arch/mips/sibyte/common/sb_tbprof.c
@@ -576,8 +576,7 @@ static int __init sbprof_tb_init(void)
tb_class = tbc;
- dev = device_create_drvdata(tbc, NULL, MKDEV(SBPROF_TB_MAJOR, 0),
- NULL, "tb");
+ dev = device_create(tbc, NULL, MKDEV(SBPROF_TB_MAJOR, 0), NULL, "tb");
if (IS_ERR(dev)) {
err = PTR_ERR(dev);
goto out_class;
diff --git a/arch/mips/sibyte/swarm/Makefile b/arch/mips/sibyte/swarm/Makefile
index f18ba9201bb..7b45f199d92 100644
--- a/arch/mips/sibyte/swarm/Makefile
+++ b/arch/mips/sibyte/swarm/Makefile
@@ -1,3 +1,4 @@
-obj-y := setup.o rtc_xicor1241.o rtc_m41t81.o
+obj-y := platform.o setup.o rtc_xicor1241.o \
+ rtc_m41t81.o
obj-$(CONFIG_I2C_BOARDINFO) += swarm-i2c.o
diff --git a/arch/mips/sibyte/swarm/platform.c b/arch/mips/sibyte/swarm/platform.c
new file mode 100644
index 00000000000..54847fe1e56
--- /dev/null
+++ b/arch/mips/sibyte/swarm/platform.c
@@ -0,0 +1,85 @@
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+
+#include <asm/sibyte/board.h>
+#include <asm/sibyte/sb1250_genbus.h>
+#include <asm/sibyte/sb1250_regs.h>
+
+#if defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_LITTLESUR)
+
+#define DRV_NAME "pata-swarm"
+
+#define SWARM_IDE_SHIFT 5
+#define SWARM_IDE_BASE 0x1f0
+#define SWARM_IDE_CTRL 0x3f6
+
+static struct resource swarm_pata_resource[] = {
+ {
+ .name = "Swarm GenBus IDE",
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "Swarm GenBus IDE",
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "Swarm GenBus IDE",
+ .flags = IORESOURCE_IRQ,
+ .start = K_INT_GB_IDE,
+ .end = K_INT_GB_IDE,
+ },
+};
+
+static struct pata_platform_info pata_platform_data = {
+ .ioport_shift = SWARM_IDE_SHIFT,
+};
+
+static struct platform_device swarm_pata_device = {
+ .name = "pata_platform",
+ .id = -1,
+ .resource = swarm_pata_resource,
+ .num_resources = ARRAY_SIZE(swarm_pata_resource),
+ .dev = {
+ .platform_data = &pata_platform_data,
+ .coherent_dma_mask = ~0, /* grumble */
+ },
+};
+
+static int __init swarm_pata_init(void)
+{
+ u8 __iomem *base;
+ phys_t offset, size;
+ struct resource *r;
+
+ if (!SIBYTE_HAVE_IDE)
+ return -ENODEV;
+
+ base = ioremap(A_IO_EXT_BASE, 0x800);
+ offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS));
+ size = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_MULT_SIZE, IDE_CS));
+ iounmap(base);
+
+ offset = G_IO_START_ADDR(offset) << S_IO_ADDRBASE;
+ size = (G_IO_MULT_SIZE(size) + 1) << S_IO_REGSIZE;
+ if (offset < A_PHYS_GENBUS || offset >= A_PHYS_GENBUS_END) {
+ pr_info(DRV_NAME ": PATA interface at GenBus disabled\n");
+
+ return -EBUSY;
+ }
+
+ pr_info(DRV_NAME ": PATA interface at GenBus slot %i\n", IDE_CS);
+
+ r = swarm_pata_resource;
+ r[0].start = offset + (SWARM_IDE_BASE << SWARM_IDE_SHIFT);
+ r[0].end = offset + ((SWARM_IDE_BASE + 8) << SWARM_IDE_SHIFT) - 1;
+ r[1].start = offset + (SWARM_IDE_CTRL << SWARM_IDE_SHIFT);
+ r[1].end = offset + ((SWARM_IDE_CTRL + 1) << SWARM_IDE_SHIFT) - 1;
+
+ return platform_device_register(&swarm_pata_device);
+}
+
+device_initcall(swarm_pata_init);
+
+#endif /* defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_LITTLESUR) */
diff --git a/arch/mips/sibyte/swarm/rtc_m41t81.c b/arch/mips/sibyte/swarm/rtc_m41t81.c
index 26fbff4c15b..b732600b47f 100644
--- a/arch/mips/sibyte/swarm/rtc_m41t81.c
+++ b/arch/mips/sibyte/swarm/rtc_m41t81.c
@@ -156,32 +156,32 @@ int m41t81_set_time(unsigned long t)
*/
spin_lock_irqsave(&rtc_lock, flags);
- tm.tm_sec = BIN2BCD(tm.tm_sec);
+ tm.tm_sec = bin2bcd(tm.tm_sec);
m41t81_write(M41T81REG_SC, tm.tm_sec);
- tm.tm_min = BIN2BCD(tm.tm_min);
+ tm.tm_min = bin2bcd(tm.tm_min);
m41t81_write(M41T81REG_MN, tm.tm_min);
- tm.tm_hour = BIN2BCD(tm.tm_hour);
+ tm.tm_hour = bin2bcd(tm.tm_hour);
tm.tm_hour = (tm.tm_hour & 0x3f) | (m41t81_read(M41T81REG_HR) & 0xc0);
m41t81_write(M41T81REG_HR, tm.tm_hour);
/* tm_wday starts from 0 to 6 */
if (tm.tm_wday == 0) tm.tm_wday = 7;
- tm.tm_wday = BIN2BCD(tm.tm_wday);
+ tm.tm_wday = bin2bcd(tm.tm_wday);
m41t81_write(M41T81REG_DY, tm.tm_wday);
- tm.tm_mday = BIN2BCD(tm.tm_mday);
+ tm.tm_mday = bin2bcd(tm.tm_mday);
m41t81_write(M41T81REG_DT, tm.tm_mday);
/* tm_mon starts from 0, *ick* */
tm.tm_mon ++;
- tm.tm_mon = BIN2BCD(tm.tm_mon);
+ tm.tm_mon = bin2bcd(tm.tm_mon);
m41t81_write(M41T81REG_MO, tm.tm_mon);
/* we don't do century, everything is beyond 2000 */
tm.tm_year %= 100;
- tm.tm_year = BIN2BCD(tm.tm_year);
+ tm.tm_year = bin2bcd(tm.tm_year);
m41t81_write(M41T81REG_YR, tm.tm_year);
spin_unlock_irqrestore(&rtc_lock, flags);
@@ -209,12 +209,12 @@ unsigned long m41t81_get_time(void)
year = m41t81_read(M41T81REG_YR);
spin_unlock_irqrestore(&rtc_lock, flags);
- sec = BCD2BIN(sec);
- min = BCD2BIN(min);
- hour = BCD2BIN(hour);
- day = BCD2BIN(day);
- mon = BCD2BIN(mon);
- year = BCD2BIN(year);
+ sec = bcd2bin(sec);
+ min = bcd2bin(min);
+ hour = bcd2bin(hour);
+ day = bcd2bin(day);
+ mon = bcd2bin(mon);
+ year = bcd2bin(year);
year += 2000;
diff --git a/arch/mips/sibyte/swarm/rtc_xicor1241.c b/arch/mips/sibyte/swarm/rtc_xicor1241.c
index ff3e5dabb34..4438b2195c4 100644
--- a/arch/mips/sibyte/swarm/rtc_xicor1241.c
+++ b/arch/mips/sibyte/swarm/rtc_xicor1241.c
@@ -124,18 +124,18 @@ int xicor_set_time(unsigned long t)
xicor_write(X1241REG_SR, X1241REG_SR_WEL | X1241REG_SR_RWEL);
/* trivial ones */
- tm.tm_sec = BIN2BCD(tm.tm_sec);
+ tm.tm_sec = bin2bcd(tm.tm_sec);
xicor_write(X1241REG_SC, tm.tm_sec);
- tm.tm_min = BIN2BCD(tm.tm_min);
+ tm.tm_min = bin2bcd(tm.tm_min);
xicor_write(X1241REG_MN, tm.tm_min);
- tm.tm_mday = BIN2BCD(tm.tm_mday);
+ tm.tm_mday = bin2bcd(tm.tm_mday);
xicor_write(X1241REG_DT, tm.tm_mday);
/* tm_mon starts from 0, *ick* */
tm.tm_mon ++;
- tm.tm_mon = BIN2BCD(tm.tm_mon);
+ tm.tm_mon = bin2bcd(tm.tm_mon);
xicor_write(X1241REG_MO, tm.tm_mon);
/* year is split */
@@ -148,7 +148,7 @@ int xicor_set_time(unsigned long t)
tmp = xicor_read(X1241REG_HR);
if (tmp & X1241REG_HR_MIL) {
/* 24 hour format */
- tm.tm_hour = BIN2BCD(tm.tm_hour);
+ tm.tm_hour = bin2bcd(tm.tm_hour);
tmp = (tmp & ~0x3f) | (tm.tm_hour & 0x3f);
} else {
/* 12 hour format, with 0x2 for pm */
@@ -157,7 +157,7 @@ int xicor_set_time(unsigned long t)
tmp |= 0x20;
tm.tm_hour -= 12;
}
- tm.tm_hour = BIN2BCD(tm.tm_hour);
+ tm.tm_hour = bin2bcd(tm.tm_hour);
tmp |= tm.tm_hour;
}
xicor_write(X1241REG_HR, tmp);
@@ -191,13 +191,13 @@ unsigned long xicor_get_time(void)
y2k = xicor_read(X1241REG_Y2K);
spin_unlock_irqrestore(&rtc_lock, flags);
- sec = BCD2BIN(sec);
- min = BCD2BIN(min);
- hour = BCD2BIN(hour);
- day = BCD2BIN(day);
- mon = BCD2BIN(mon);
- year = BCD2BIN(year);
- y2k = BCD2BIN(y2k);
+ sec = bcd2bin(sec);
+ min = bcd2bin(min);
+ hour = bcd2bin(hour);
+ day = bcd2bin(day);
+ mon = bcd2bin(mon);
+ year = bcd2bin(year);
+ y2k = bcd2bin(y2k);
year += (y2k * 100);
diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
index 840fe757c48..17052db4161 100644
--- a/arch/mips/txx9/Kconfig
+++ b/arch/mips/txx9/Kconfig
@@ -45,6 +45,14 @@ config TOSHIBA_RBTX4938
This Toshiba board is based on the TX4938 processor. Say Y here to
support this machine type
+config TOSHIBA_RBTX4939
+ bool "Toshiba RBTX4939 bobard"
+ depends on MACH_TX49XX
+ select SOC_TX4939
+ help
+ This Toshiba board is based on the TX4939 processor. Say Y here to
+ support this machine type
+
config SOC_TX3927
bool
select CEVT_TXX9
@@ -71,6 +79,13 @@ config SOC_TX4938
select PCI_TX4927
select GPIO_TXX9
+config SOC_TX4939
+ bool
+ select CEVT_TXX9
+ select HAS_TXX9_SERIAL
+ select HW_HAS_PCI
+ select PCI_TX4927
+
config TOSHIBA_FPCIB0
bool "FPCIB0 Backplane Support"
depends on PCI && MACH_TXX9
@@ -94,16 +109,11 @@ config TOSHIBA_RBTX4938_MPLEX_NAND
bool "NAND"
config TOSHIBA_RBTX4938_MPLEX_ATA
bool "ATA"
+config TOSHIBA_RBTX4938_MPLEX_KEEP
+ bool "Keep firmware settings"
endchoice
-config TX4938_NAND_BOOT
- depends on EXPERIMENTAL && TOSHIBA_RBTX4938_MPLEX_NAND
- bool "NAND Boot Support (EXPERIMENTAL)"
- help
- This is only for Toshiba RBTX4938 reference board, which has NAND IPL.
- Select this option if you need to use NAND boot.
-
endif
config PCI_TX4927
diff --git a/arch/mips/txx9/generic/Makefile b/arch/mips/txx9/generic/Makefile
index 9bb34af26b7..0030d23bef5 100644
--- a/arch/mips/txx9/generic/Makefile
+++ b/arch/mips/txx9/generic/Makefile
@@ -7,6 +7,8 @@ obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_SOC_TX3927) += setup_tx3927.o irq_tx3927.o
obj-$(CONFIG_SOC_TX4927) += mem_tx4927.o setup_tx4927.o irq_tx4927.o
obj-$(CONFIG_SOC_TX4938) += mem_tx4927.o setup_tx4938.o irq_tx4938.o
+obj-$(CONFIG_SOC_TX4939) += setup_tx4939.o irq_tx4939.o
obj-$(CONFIG_TOSHIBA_FPCIB0) += smsc_fdc37m81x.o
+obj-$(CONFIG_SPI) += spi_eeprom.o
EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/txx9/generic/irq_tx4927.c b/arch/mips/txx9/generic/irq_tx4927.c
index cbea1fdde82..ad2870def8f 100644
--- a/arch/mips/txx9/generic/irq_tx4927.c
+++ b/arch/mips/txx9/generic/irq_tx4927.c
@@ -30,8 +30,19 @@
void __init tx4927_irq_init(void)
{
+ int i;
+
mips_cpu_irq_init();
txx9_irq_init(TX4927_IRC_REG & 0xfffffffffULL);
set_irq_chained_handler(MIPS_CPU_IRQ_BASE + TX4927_IRC_INT,
handle_simple_irq);
+ /* raise priority for errors, timers, SIO */
+ txx9_irq_set_pri(TX4927_IR_ECCERR, 7);
+ txx9_irq_set_pri(TX4927_IR_WTOERR, 7);
+ txx9_irq_set_pri(TX4927_IR_PCIERR, 7);
+ txx9_irq_set_pri(TX4927_IR_PCIPME, 7);
+ for (i = 0; i < TX4927_NUM_IR_TMR; i++)
+ txx9_irq_set_pri(TX4927_IR_TMR(i), 6);
+ for (i = 0; i < TX4927_NUM_IR_SIO; i++)
+ txx9_irq_set_pri(TX4927_IR_SIO(i), 5);
}
diff --git a/arch/mips/txx9/generic/irq_tx4938.c b/arch/mips/txx9/generic/irq_tx4938.c
index 6eac684bf19..025ae11359a 100644
--- a/arch/mips/txx9/generic/irq_tx4938.c
+++ b/arch/mips/txx9/generic/irq_tx4938.c
@@ -18,8 +18,19 @@
void __init tx4938_irq_init(void)
{
+ int i;
+
mips_cpu_irq_init();
txx9_irq_init(TX4938_IRC_REG & 0xfffffffffULL);
set_irq_chained_handler(MIPS_CPU_IRQ_BASE + TX4938_IRC_INT,
handle_simple_irq);
+ /* raise priority for errors, timers, SIO */
+ txx9_irq_set_pri(TX4938_IR_ECCERR, 7);
+ txx9_irq_set_pri(TX4938_IR_WTOERR, 7);
+ txx9_irq_set_pri(TX4938_IR_PCIERR, 7);
+ txx9_irq_set_pri(TX4938_IR_PCIPME, 7);
+ for (i = 0; i < TX4938_NUM_IR_TMR; i++)
+ txx9_irq_set_pri(TX4938_IR_TMR(i), 6);
+ for (i = 0; i < TX4938_NUM_IR_SIO; i++)
+ txx9_irq_set_pri(TX4938_IR_SIO(i), 5);
}
diff --git a/arch/mips/txx9/generic/irq_tx4939.c b/arch/mips/txx9/generic/irq_tx4939.c
new file mode 100644
index 00000000000..013213a8706
--- /dev/null
+++ b/arch/mips/txx9/generic/irq_tx4939.c
@@ -0,0 +1,215 @@
+/*
+ * TX4939 irq routines
+ * Based on linux/arch/mips/kernel/irq_txx9.c,
+ * and RBTX49xx patch from CELF patch archive.
+ *
+ * Copyright 2001, 2003-2005 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ * ahennessy@mvista.com
+ * source@mvista.com
+ * Copyright (C) 2000-2001,2005-2007 Toshiba Corporation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+/*
+ * TX4939 defines 64 IRQs.
+ * Similer to irq_txx9.c but different register layouts.
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <asm/irq_cpu.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9/tx4939.h>
+
+/* IRCER : Int. Control Enable */
+#define TXx9_IRCER_ICE 0x00000001
+
+/* IRCR : Int. Control */
+#define TXx9_IRCR_LOW 0x00000000
+#define TXx9_IRCR_HIGH 0x00000001
+#define TXx9_IRCR_DOWN 0x00000002
+#define TXx9_IRCR_UP 0x00000003
+#define TXx9_IRCR_EDGE(cr) ((cr) & 0x00000002)
+
+/* IRSCR : Int. Status Control */
+#define TXx9_IRSCR_EIClrE 0x00000100
+#define TXx9_IRSCR_EIClr_MASK 0x0000000f
+
+/* IRCSR : Int. Current Status */
+#define TXx9_IRCSR_IF 0x00010000
+
+#define irc_dlevel 0
+#define irc_elevel 1
+
+static struct {
+ unsigned char level;
+ unsigned char mode;
+} tx4939irq[TX4939_NUM_IR] __read_mostly;
+
+static void tx4939_irq_unmask(unsigned int irq)
+{
+ unsigned int irq_nr = irq - TXX9_IRQ_BASE;
+ u32 __iomem *lvlp;
+ int ofs;
+ if (irq_nr < 32) {
+ irq_nr--;
+ lvlp = &tx4939_ircptr->lvl[(irq_nr % 16) / 2].r;
+ } else {
+ irq_nr -= 32;
+ lvlp = &tx4939_ircptr->lvl[8 + (irq_nr % 16) / 2].r;
+ }
+ ofs = (irq_nr & 16) + (irq_nr & 1) * 8;
+ __raw_writel((__raw_readl(lvlp) & ~(0xff << ofs))
+ | (tx4939irq[irq_nr].level << ofs),
+ lvlp);
+}
+
+static inline void tx4939_irq_mask(unsigned int irq)
+{
+ unsigned int irq_nr = irq - TXX9_IRQ_BASE;
+ u32 __iomem *lvlp;
+ int ofs;
+ if (irq_nr < 32) {
+ irq_nr--;
+ lvlp = &tx4939_ircptr->lvl[(irq_nr % 16) / 2].r;
+ } else {
+ irq_nr -= 32;
+ lvlp = &tx4939_ircptr->lvl[8 + (irq_nr % 16) / 2].r;
+ }
+ ofs = (irq_nr & 16) + (irq_nr & 1) * 8;
+ __raw_writel((__raw_readl(lvlp) & ~(0xff << ofs))
+ | (irc_dlevel << ofs),
+ lvlp);
+ mmiowb();
+}
+
+static void tx4939_irq_mask_ack(unsigned int irq)
+{
+ unsigned int irq_nr = irq - TXX9_IRQ_BASE;
+
+ tx4939_irq_mask(irq);
+ if (TXx9_IRCR_EDGE(tx4939irq[irq_nr].mode)) {
+ irq_nr--;
+ /* clear edge detection */
+ __raw_writel((TXx9_IRSCR_EIClrE | (irq_nr & 0xf))
+ << (irq_nr & 0x10),
+ &tx4939_ircptr->edc.r);
+ }
+}
+
+static int tx4939_irq_set_type(unsigned int irq, unsigned int flow_type)
+{
+ unsigned int irq_nr = irq - TXX9_IRQ_BASE;
+ u32 cr;
+ u32 __iomem *crp;
+ int ofs;
+ int mode;
+
+ if (flow_type & IRQF_TRIGGER_PROBE)
+ return 0;
+ switch (flow_type & IRQF_TRIGGER_MASK) {
+ case IRQF_TRIGGER_RISING:
+ mode = TXx9_IRCR_UP;
+ break;
+ case IRQF_TRIGGER_FALLING:
+ mode = TXx9_IRCR_DOWN;
+ break;
+ case IRQF_TRIGGER_HIGH:
+ mode = TXx9_IRCR_HIGH;
+ break;
+ case IRQF_TRIGGER_LOW:
+ mode = TXx9_IRCR_LOW;
+ break;
+ default:
+ return -EINVAL;
+ }
+ if (irq_nr < 32) {
+ irq_nr--;
+ crp = &tx4939_ircptr->dm[(irq_nr & 8) >> 3].r;
+ } else {
+ irq_nr -= 32;
+ crp = &tx4939_ircptr->dm2[((irq_nr & 8) >> 3)].r;
+ }
+ ofs = (((irq_nr & 16) >> 1) | (irq_nr & (8 - 1))) * 2;
+ cr = __raw_readl(crp);
+ cr &= ~(0x3 << ofs);
+ cr |= (mode & 0x3) << ofs;
+ __raw_writel(cr, crp);
+ tx4939irq[irq_nr].mode = mode;
+ return 0;
+}
+
+static struct irq_chip tx4939_irq_chip = {
+ .name = "TX4939",
+ .ack = tx4939_irq_mask_ack,
+ .mask = tx4939_irq_mask,
+ .mask_ack = tx4939_irq_mask_ack,
+ .unmask = tx4939_irq_unmask,
+ .set_type = tx4939_irq_set_type,
+};
+
+static int tx4939_irq_set_pri(int irc_irq, int new_pri)
+{
+ int old_pri;
+
+ if ((unsigned int)irc_irq >= TX4939_NUM_IR)
+ return 0;
+ old_pri = tx4939irq[irc_irq].level;
+ tx4939irq[irc_irq].level = new_pri;
+ return old_pri;
+}
+
+void __init tx4939_irq_init(void)
+{
+ int i;
+
+ mips_cpu_irq_init();
+ /* disable interrupt control */
+ __raw_writel(0, &tx4939_ircptr->den.r);
+ __raw_writel(0, &tx4939_ircptr->maskint.r);
+ __raw_writel(0, &tx4939_ircptr->maskext.r);
+ /* irq_base + 0 is not used */
+ for (i = 1; i < TX4939_NUM_IR; i++) {
+ tx4939irq[i].level = 4; /* middle level */
+ tx4939irq[i].mode = TXx9_IRCR_LOW;
+ set_irq_chip_and_handler(TXX9_IRQ_BASE + i,
+ &tx4939_irq_chip, handle_level_irq);
+ }
+
+ /* mask all IRC interrupts */
+ __raw_writel(0, &tx4939_ircptr->msk.r);
+ for (i = 0; i < 16; i++)
+ __raw_writel(0, &tx4939_ircptr->lvl[i].r);
+ /* setup IRC interrupt mode (Low Active) */
+ for (i = 0; i < 2; i++)
+ __raw_writel(0, &tx4939_ircptr->dm[i].r);
+ for (i = 0; i < 2; i++)
+ __raw_writel(0, &tx4939_ircptr->dm2[i].r);
+ /* enable interrupt control */
+ __raw_writel(TXx9_IRCER_ICE, &tx4939_ircptr->den.r);
+ __raw_writel(irc_elevel, &tx4939_ircptr->msk.r);
+
+ set_irq_chained_handler(MIPS_CPU_IRQ_BASE + TX4939_IRC_INT,
+ handle_simple_irq);
+
+ /* raise priority for errors, timers, sio */
+ tx4939_irq_set_pri(TX4939_IR_WTOERR, 7);
+ tx4939_irq_set_pri(TX4939_IR_PCIERR, 7);
+ tx4939_irq_set_pri(TX4939_IR_PCIPME, 7);
+ for (i = 0; i < TX4939_NUM_IR_TMR; i++)
+ tx4939_irq_set_pri(TX4939_IR_TMR(i), 6);
+ for (i = 0; i < TX4939_NUM_IR_SIO; i++)
+ tx4939_irq_set_pri(TX4939_IR_SIO(i), 5);
+}
+
+int tx4939_irq(void)
+{
+ u32 csr = __raw_readl(&tx4939_ircptr->cs.r);
+
+ if (likely(!(csr & TXx9_IRCSR_IF)))
+ return TXX9_IRQ_BASE + (csr & (TX4939_NUM_IR - 1));
+ return -1;
+}
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index fe6bee09cec..5526375010f 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -22,11 +22,16 @@
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
+#include <linux/mtd/physmap.h>
+#include <linux/leds.h>
#include <asm/bootinfo.h>
#include <asm/time.h>
#include <asm/reboot.h>
+#include <asm/r4kcache.h>
+#include <asm/sections.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/pci.h>
+#include <asm/txx9tmr.h>
#ifdef CONFIG_CPU_TX49XX
#include <asm/txx9/tx4938.h>
#endif
@@ -67,7 +72,12 @@ unsigned int txx9_master_clock;
unsigned int txx9_cpu_clock;
unsigned int txx9_gbus_clock;
+#ifdef CONFIG_CPU_TX39XX
+/* don't enable by default - see errata */
+int txx9_ccfg_toeon __initdata;
+#else
int txx9_ccfg_toeon __initdata = 1;
+#endif
/* Minimum CLK support */
@@ -119,39 +129,232 @@ int irq_to_gpio(unsigned irq)
EXPORT_SYMBOL(irq_to_gpio);
#endif
-extern struct txx9_board_vec jmr3927_vec;
-extern struct txx9_board_vec rbtx4927_vec;
-extern struct txx9_board_vec rbtx4937_vec;
-extern struct txx9_board_vec rbtx4938_vec;
+#define BOARD_VEC(board) extern struct txx9_board_vec board;
+#include <asm/txx9/boards.h>
+#undef BOARD_VEC
struct txx9_board_vec *txx9_board_vec __initdata;
static char txx9_system_type[32];
-void __init prom_init_cmdline(void)
+static struct txx9_board_vec *board_vecs[] __initdata = {
+#define BOARD_VEC(board) &board,
+#include <asm/txx9/boards.h>
+#undef BOARD_VEC
+};
+
+static struct txx9_board_vec *__init find_board_byname(const char *name)
+{
+ int i;
+
+ /* search board_vecs table */
+ for (i = 0; i < ARRAY_SIZE(board_vecs); i++) {
+ if (strstr(board_vecs[i]->system, name))
+ return board_vecs[i];
+ }
+ return NULL;
+}
+
+static void __init prom_init_cmdline(void)
{
int argc = (int)fw_arg0;
- char **argv = (char **)fw_arg1;
+ int *argv32 = (int *)fw_arg1;
int i; /* Always ignore the "-c" at argv[0] */
-#ifdef CONFIG_64BIT
- char *fixed_argv[32];
- for (i = 0; i < argc; i++)
- fixed_argv[i] = (char *)(long)(*((__s32 *)argv + i));
- argv = fixed_argv;
-#endif
+ char builtin[CL_SIZE];
/* ignore all built-in args if any f/w args given */
- if (argc > 1)
- *arcs_cmdline = '\0';
+ /*
+ * But if built-in strings was started with '+', append them
+ * to command line args. If built-in was started with '-',
+ * ignore all f/w args.
+ */
+ builtin[0] = '\0';
+ if (arcs_cmdline[0] == '+')
+ strcpy(builtin, arcs_cmdline + 1);
+ else if (arcs_cmdline[0] == '-') {
+ strcpy(builtin, arcs_cmdline + 1);
+ argc = 0;
+ } else if (argc <= 1)
+ strcpy(builtin, arcs_cmdline);
+ arcs_cmdline[0] = '\0';
for (i = 1; i < argc; i++) {
+ char *str = (char *)(long)argv32[i];
if (i != 1)
strcat(arcs_cmdline, " ");
- strcat(arcs_cmdline, argv[i]);
+ if (strchr(str, ' ')) {
+ strcat(arcs_cmdline, "\"");
+ strcat(arcs_cmdline, str);
+ strcat(arcs_cmdline, "\"");
+ } else
+ strcat(arcs_cmdline, str);
+ }
+ /* append saved builtin args */
+ if (builtin[0]) {
+ if (arcs_cmdline[0])
+ strcat(arcs_cmdline, " ");
+ strcat(arcs_cmdline, builtin);
}
}
-void __init prom_init(void)
+static int txx9_ic_disable __initdata;
+static int txx9_dc_disable __initdata;
+
+#if defined(CONFIG_CPU_TX49XX)
+/* flush all cache on very early stage (before 4k_cache_init) */
+static void __init early_flush_dcache(void)
{
+ unsigned int conf = read_c0_config();
+ unsigned int dc_size = 1 << (12 + ((conf & CONF_DC) >> 6));
+ unsigned int linesz = 32;
+ unsigned long addr, end;
+
+ end = INDEX_BASE + dc_size / 4;
+ /* 4way, waybit=0 */
+ for (addr = INDEX_BASE; addr < end; addr += linesz) {
+ cache_op(Index_Writeback_Inv_D, addr | 0);
+ cache_op(Index_Writeback_Inv_D, addr | 1);
+ cache_op(Index_Writeback_Inv_D, addr | 2);
+ cache_op(Index_Writeback_Inv_D, addr | 3);
+ }
+}
+
+static void __init txx9_cache_fixup(void)
+{
+ unsigned int conf;
+
+ conf = read_c0_config();
+ /* flush and disable */
+ if (txx9_ic_disable) {
+ conf |= TX49_CONF_IC;
+ write_c0_config(conf);
+ }
+ if (txx9_dc_disable) {
+ early_flush_dcache();
+ conf |= TX49_CONF_DC;
+ write_c0_config(conf);
+ }
+
+ /* enable cache */
+ conf = read_c0_config();
+ if (!txx9_ic_disable)
+ conf &= ~TX49_CONF_IC;
+ if (!txx9_dc_disable)
+ conf &= ~TX49_CONF_DC;
+ write_c0_config(conf);
+
+ if (conf & TX49_CONF_IC)
+ pr_info("TX49XX I-Cache disabled.\n");
+ if (conf & TX49_CONF_DC)
+ pr_info("TX49XX D-Cache disabled.\n");
+}
+#elif defined(CONFIG_CPU_TX39XX)
+/* flush all cache on very early stage (before tx39_cache_init) */
+static void __init early_flush_dcache(void)
+{
+ unsigned int conf = read_c0_config();
+ unsigned int dc_size = 1 << (10 + ((conf & TX39_CONF_DCS_MASK) >>
+ TX39_CONF_DCS_SHIFT));
+ unsigned int linesz = 16;
+ unsigned long addr, end;
+
+ end = INDEX_BASE + dc_size / 2;
+ /* 2way, waybit=0 */
+ for (addr = INDEX_BASE; addr < end; addr += linesz) {
+ cache_op(Index_Writeback_Inv_D, addr | 0);
+ cache_op(Index_Writeback_Inv_D, addr | 1);
+ }
+}
+
+static void __init txx9_cache_fixup(void)
+{
+ unsigned int conf;
+
+ conf = read_c0_config();
+ /* flush and disable */
+ if (txx9_ic_disable) {
+ conf &= ~TX39_CONF_ICE;
+ write_c0_config(conf);
+ }
+ if (txx9_dc_disable) {
+ early_flush_dcache();
+ conf &= ~TX39_CONF_DCE;
+ write_c0_config(conf);
+ }
+
+ /* enable cache */
+ conf = read_c0_config();
+ if (!txx9_ic_disable)
+ conf |= TX39_CONF_ICE;
+ if (!txx9_dc_disable)
+ conf |= TX39_CONF_DCE;
+ write_c0_config(conf);
+
+ if (!(conf & TX39_CONF_ICE))
+ pr_info("TX39XX I-Cache disabled.\n");
+ if (!(conf & TX39_CONF_DCE))
+ pr_info("TX39XX D-Cache disabled.\n");
+}
+#else
+static inline void txx9_cache_fixup(void)
+{
+}
+#endif
+
+static void __init preprocess_cmdline(void)
+{
+ char cmdline[CL_SIZE];
+ char *s;
+
+ strcpy(cmdline, arcs_cmdline);
+ s = cmdline;
+ arcs_cmdline[0] = '\0';
+ while (s && *s) {
+ char *str = strsep(&s, " ");
+ if (strncmp(str, "board=", 6) == 0) {
+ txx9_board_vec = find_board_byname(str + 6);
+ continue;
+ } else if (strncmp(str, "masterclk=", 10) == 0) {
+ unsigned long val;
+ if (strict_strtoul(str + 10, 10, &val) == 0)
+ txx9_master_clock = val;
+ continue;
+ } else if (strcmp(str, "icdisable") == 0) {
+ txx9_ic_disable = 1;
+ continue;
+ } else if (strcmp(str, "dcdisable") == 0) {
+ txx9_dc_disable = 1;
+ continue;
+ } else if (strcmp(str, "toeoff") == 0) {
+ txx9_ccfg_toeon = 0;
+ continue;
+ } else if (strcmp(str, "toeon") == 0) {
+ txx9_ccfg_toeon = 1;
+ continue;
+ }
+ if (arcs_cmdline[0])
+ strcat(arcs_cmdline, " ");
+ strcat(arcs_cmdline, str);
+ }
+
+ txx9_cache_fixup();
+}
+
+static void __init select_board(void)
+{
+ const char *envstr;
+
+ /* first, determine by "board=" argument in preprocess_cmdline() */
+ if (txx9_board_vec)
+ return;
+ /* next, determine by "board" envvar */
+ envstr = prom_getenv("board");
+ if (envstr) {
+ txx9_board_vec = find_board_byname(envstr);
+ if (txx9_board_vec)
+ return;
+ }
+
+ /* select "default" board */
#ifdef CONFIG_CPU_TX39XX
txx9_board_vec = &jmr3927_vec;
#endif
@@ -170,8 +373,20 @@ void __init prom_init(void)
txx9_board_vec = &rbtx4938_vec;
break;
#endif
+#ifdef CONFIG_TOSHIBA_RBTX4939
+ case 0x4939:
+ txx9_board_vec = &rbtx4939_vec;
+ break;
+#endif
}
#endif
+}
+
+void __init prom_init(void)
+{
+ prom_init_cmdline();
+ preprocess_cmdline();
+ select_board();
strcpy(txx9_system_type, txx9_board_vec->system);
@@ -180,6 +395,11 @@ void __init prom_init(void)
void __init prom_free_prom_memory(void)
{
+ unsigned long saddr = PAGE_SIZE;
+ unsigned long eaddr = __pa_symbol(&_text);
+
+ if (saddr < eaddr)
+ free_init_pages("prom memory", saddr, eaddr);
}
const char *get_system_type(void)
@@ -192,6 +412,21 @@ char * __init prom_getcmdline(void)
return &(arcs_cmdline[0]);
}
+const char *__init prom_getenv(const char *name)
+{
+ const s32 *str = (const s32 *)fw_arg2;
+
+ if (!str)
+ return NULL;
+ /* YAMON style ("name", "value" pairs) */
+ while (str[0] && str[1]) {
+ if (!strcmp((const char *)(unsigned long)str[0], name))
+ return (const char *)(unsigned long)str[1];
+ str += 2;
+ }
+ return NULL;
+}
+
static void __noreturn txx9_machine_halt(void)
{
local_irq_disable();
@@ -222,6 +457,20 @@ void __init txx9_wdt_init(unsigned long base)
platform_device_register_simple("txx9wdt", -1, &res, 1);
}
+void txx9_wdt_now(unsigned long base)
+{
+ struct txx9_tmr_reg __iomem *tmrptr =
+ ioremap(base, sizeof(struct txx9_tmr_reg));
+ /* disable watch dog timer */
+ __raw_writel(TXx9_TMWTMR_WDIS | TXx9_TMWTMR_TWC, &tmrptr->wtmr);
+ __raw_writel(0, &tmrptr->tcr);
+ /* kick watchdog */
+ __raw_writel(TXx9_TMWTMR_TWIE, &tmrptr->wtmr);
+ __raw_writel(1, &tmrptr->cpra); /* immediate */
+ __raw_writel(TXx9_TMTCR_TCE | TXx9_TMTCR_CCDE | TXx9_TMTCR_TMODE_WDOG,
+ &tmrptr->tcr);
+}
+
/* SPI support */
void __init txx9_spi_init(int busid, unsigned long base, int irq)
{
@@ -372,3 +621,153 @@ static unsigned long __swizzle_addr_none(unsigned long port)
unsigned long (*__swizzle_addr_b)(unsigned long port) = __swizzle_addr_none;
EXPORT_SYMBOL(__swizzle_addr_b);
#endif
+
+void __init txx9_physmap_flash_init(int no, unsigned long addr,
+ unsigned long size,
+ const struct physmap_flash_data *pdata)
+{
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+ struct resource res = {
+ .start = addr,
+ .end = addr + size - 1,
+ .flags = IORESOURCE_MEM,
+ };
+ struct platform_device *pdev;
+#ifdef CONFIG_MTD_PARTITIONS
+ static struct mtd_partition parts[2];
+ struct physmap_flash_data pdata_part;
+
+ /* If this area contained boot area, make separate partition */
+ if (pdata->nr_parts == 0 && !pdata->parts &&
+ addr < 0x1fc00000 && addr + size > 0x1fc00000 &&
+ !parts[0].name) {
+ parts[0].name = "boot";
+ parts[0].offset = 0x1fc00000 - addr;
+ parts[0].size = addr + size - 0x1fc00000;
+ parts[1].name = "user";
+ parts[1].offset = 0;
+ parts[1].size = 0x1fc00000 - addr;
+ pdata_part = *pdata;
+ pdata_part.nr_parts = ARRAY_SIZE(parts);
+ pdata_part.parts = parts;
+ pdata = &pdata_part;
+ }
+#endif
+ pdev = platform_device_alloc("physmap-flash", no);
+ if (!pdev ||
+ platform_device_add_resources(pdev, &res, 1) ||
+ platform_device_add_data(pdev, pdata, sizeof(*pdata)) ||
+ platform_device_add(pdev))
+ platform_device_put(pdev);
+#endif
+}
+
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static DEFINE_SPINLOCK(txx9_iocled_lock);
+
+#define TXX9_IOCLED_MAXLEDS 8
+
+struct txx9_iocled_data {
+ struct gpio_chip chip;
+ u8 cur_val;
+ void __iomem *mmioaddr;
+ struct gpio_led_platform_data pdata;
+ struct gpio_led leds[TXX9_IOCLED_MAXLEDS];
+ char names[TXX9_IOCLED_MAXLEDS][32];
+};
+
+static int txx9_iocled_get(struct gpio_chip *chip, unsigned int offset)
+{
+ struct txx9_iocled_data *data =
+ container_of(chip, struct txx9_iocled_data, chip);
+ return data->cur_val & (1 << offset);
+}
+
+static void txx9_iocled_set(struct gpio_chip *chip, unsigned int offset,
+ int value)
+{
+ struct txx9_iocled_data *data =
+ container_of(chip, struct txx9_iocled_data, chip);
+ unsigned long flags;
+ spin_lock_irqsave(&txx9_iocled_lock, flags);
+ if (value)
+ data->cur_val |= 1 << offset;
+ else
+ data->cur_val &= ~(1 << offset);
+ writeb(data->cur_val, data->mmioaddr);
+ mmiowb();
+ spin_unlock_irqrestore(&txx9_iocled_lock, flags);
+}
+
+static int txx9_iocled_dir_in(struct gpio_chip *chip, unsigned int offset)
+{
+ return 0;
+}
+
+static int txx9_iocled_dir_out(struct gpio_chip *chip, unsigned int offset,
+ int value)
+{
+ txx9_iocled_set(chip, offset, value);
+ return 0;
+}
+
+void __init txx9_iocled_init(unsigned long baseaddr,
+ int basenum, unsigned int num, int lowactive,
+ const char *color, char **deftriggers)
+{
+ struct txx9_iocled_data *iocled;
+ struct platform_device *pdev;
+ int i;
+ static char *default_triggers[] __initdata = {
+ "heartbeat",
+ "ide-disk",
+ "nand-disk",
+ NULL,
+ };
+
+ if (!deftriggers)
+ deftriggers = default_triggers;
+ iocled = kzalloc(sizeof(*iocled), GFP_KERNEL);
+ if (!iocled)
+ return;
+ iocled->mmioaddr = ioremap(baseaddr, 1);
+ if (!iocled->mmioaddr)
+ return;
+ iocled->chip.get = txx9_iocled_get;
+ iocled->chip.set = txx9_iocled_set;
+ iocled->chip.direction_input = txx9_iocled_dir_in;
+ iocled->chip.direction_output = txx9_iocled_dir_out;
+ iocled->chip.label = "iocled";
+ iocled->chip.base = basenum;
+ iocled->chip.ngpio = num;
+ if (gpiochip_add(&iocled->chip))
+ return;
+ if (basenum < 0)
+ basenum = iocled->chip.base;
+
+ pdev = platform_device_alloc("leds-gpio", basenum);
+ if (!pdev)
+ return;
+ iocled->pdata.num_leds = num;
+ iocled->pdata.leds = iocled->leds;
+ for (i = 0; i < num; i++) {
+ struct gpio_led *led = &iocled->leds[i];
+ snprintf(iocled->names[i], sizeof(iocled->names[i]),
+ "iocled:%s:%u", color, i);
+ led->name = iocled->names[i];
+ led->gpio = basenum + i;
+ led->active_low = lowactive;
+ if (deftriggers && *deftriggers)
+ led->default_trigger = *deftriggers++;
+ }
+ pdev->dev.platform_data = &iocled->pdata;
+ if (platform_device_add(pdev))
+ platform_device_put(pdev);
+}
+#else /* CONFIG_LEDS_GPIO */
+void __init txx9_iocled_init(unsigned long baseaddr,
+ int basenum, unsigned int num, int lowactive,
+ const char *color, char **deftriggers)
+{
+}
+#endif /* CONFIG_LEDS_GPIO */
diff --git a/arch/mips/txx9/generic/setup_tx3927.c b/arch/mips/txx9/generic/setup_tx3927.c
index 7bd963d37fc..9505d58454c 100644
--- a/arch/mips/txx9/generic/setup_tx3927.c
+++ b/arch/mips/txx9/generic/setup_tx3927.c
@@ -15,6 +15,7 @@
#include <linux/delay.h>
#include <linux/param.h>
#include <linux/io.h>
+#include <linux/mtd/physmap.h>
#include <asm/mipsregs.h>
#include <asm/txx9irq.h>
#include <asm/txx9tmr.h>
@@ -32,11 +33,6 @@ void __init tx3927_setup(void)
int i;
unsigned int conf;
- /* don't enable - see errata */
- txx9_ccfg_toeon = 0;
- if (strstr(prom_getcmdline(), "toeon") != NULL)
- txx9_ccfg_toeon = 1;
-
txx9_reg_res_init(TX3927_REV_PCODE(), TX3927_REG_BASE,
TX3927_REG_SIZE);
@@ -99,16 +95,14 @@ void __init tx3927_setup(void)
txx9_gpio_init(TX3927_PIO_REG, 0, 16);
conf = read_c0_conf();
- if (!(conf & TX39_CONF_ICE))
- printk(KERN_INFO "TX3927 I-Cache disabled.\n");
- if (!(conf & TX39_CONF_DCE))
- printk(KERN_INFO "TX3927 D-Cache disabled.\n");
- else if (!(conf & TX39_CONF_WBON))
- printk(KERN_INFO "TX3927 D-Cache WriteThrough.\n");
- else if (!(conf & TX39_CONF_CWFON))
- printk(KERN_INFO "TX3927 D-Cache WriteBack.\n");
- else
- printk(KERN_INFO "TX3927 D-Cache WriteBack (CWF) .\n");
+ if (conf & TX39_CONF_DCE) {
+ if (!(conf & TX39_CONF_WBON))
+ pr_info("TX3927 D-Cache WriteThrough.\n");
+ else if (!(conf & TX39_CONF_CWFON))
+ pr_info("TX3927 D-Cache WriteBack.\n");
+ else
+ pr_info("TX3927 D-Cache WriteBack (CWF) .\n");
+ }
}
void __init tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr)
@@ -128,3 +122,16 @@ void __init tx3927_sio_init(unsigned int sclk, unsigned int cts_mask)
TXX9_IRQ_BASE + TX3927_IR_SIO(i),
i, sclk, (1 << i) & cts_mask);
}
+
+void __init tx3927_mtd_init(int ch)
+{
+ struct physmap_flash_data pdata = {
+ .width = TX3927_ROMC_WIDTH(ch) / 8,
+ };
+ unsigned long start = txx9_ce_res[ch].start;
+ unsigned long size = txx9_ce_res[ch].end - start + 1;
+
+ if (!(tx3927_romcptr->cr[ch] & 0x8))
+ return; /* disabled */
+ txx9_physmap_flash_init(ch, start, size, &pdata);
+}
diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c
index f80d4b7a694..914e93c6263 100644
--- a/arch/mips/txx9/generic/setup_tx4927.c
+++ b/arch/mips/txx9/generic/setup_tx4927.c
@@ -14,6 +14,10 @@
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/param.h>
+#include <linux/ptrace.h>
+#include <linux/mtd/physmap.h>
+#include <asm/reboot.h>
+#include <asm/traps.h>
#include <asm/txx9irq.h>
#include <asm/txx9tmr.h>
#include <asm/txx9pio.h>
@@ -22,6 +26,10 @@
static void __init tx4927_wdr_init(void)
{
+ /* report watchdog reset status */
+ if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_WDRST)
+ pr_warning("Watchdog reset detected at 0x%lx\n",
+ read_c0_errorepc());
/* clear WatchDogReset (W1C) */
tx4927_ccfg_set(TX4927_CCFG_WDRST);
/* do reset on watchdog */
@@ -33,6 +41,47 @@ void __init tx4927_wdt_init(void)
txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL);
}
+static void tx4927_machine_restart(char *command)
+{
+ local_irq_disable();
+ pr_emerg("Rebooting (with %s watchdog reset)...\n",
+ (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_WDREXEN) ?
+ "external" : "internal");
+ /* clear watchdog status */
+ tx4927_ccfg_set(TX4927_CCFG_WDRST); /* W1C */
+ txx9_wdt_now(TX4927_TMR_REG(2) & 0xfffffffffULL);
+ while (!(____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_WDRST))
+ ;
+ mdelay(10);
+ if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_WDREXEN) {
+ pr_emerg("Rebooting (with internal watchdog reset)...\n");
+ /* External WDRST failed. Do internal watchdog reset */
+ tx4927_ccfg_clear(TX4927_CCFG_WDREXEN);
+ }
+ /* fallback */
+ (*_machine_halt)();
+}
+
+void show_registers(struct pt_regs *regs);
+static int tx4927_be_handler(struct pt_regs *regs, int is_fixup)
+{
+ int data = regs->cp0_cause & 4;
+ console_verbose();
+ pr_err("%cBE exception at %#lx\n", data ? 'D' : 'I', regs->cp0_epc);
+ pr_err("ccfg:%llx, toea:%llx\n",
+ (unsigned long long)____raw_readq(&tx4927_ccfgptr->ccfg),
+ (unsigned long long)____raw_readq(&tx4927_ccfgptr->toea));
+#ifdef CONFIG_PCI
+ tx4927_report_pcic_status();
+#endif
+ show_registers(regs);
+ panic("BusError!");
+}
+static void __init tx4927_be_init(void)
+{
+ board_be_handler = tx4927_be_handler;
+}
+
static struct resource tx4927_sdram_resource[4];
void __init tx4927_setup(void)
@@ -44,6 +93,7 @@ void __init tx4927_setup(void)
txx9_reg_res_init(TX4927_REV_PCODE(), TX4927_REG_BASE,
TX4927_REG_SIZE);
+ set_c0_config(TX49_CONF_CWFON);
/* SDRAMC,EBUSC are configured by PROM */
for (i = 0; i < 8; i++) {
@@ -167,6 +217,9 @@ void __init tx4927_setup(void)
txx9_gpio_init(TX4927_PIO_REG & 0xfffffffffULL, 0, TX4927_NUM_PIO);
__raw_writel(0, &tx4927_pioptr->maskcpu);
__raw_writel(0, &tx4927_pioptr->maskext);
+
+ _machine_restart = tx4927_machine_restart;
+ board_be_init = tx4927_be_init;
}
void __init tx4927_time_init(unsigned int tmrnr)
@@ -186,3 +239,47 @@ void __init tx4927_sio_init(unsigned int sclk, unsigned int cts_mask)
TXX9_IRQ_BASE + TX4927_IR_SIO(i),
i, sclk, (1 << i) & cts_mask);
}
+
+void __init tx4927_mtd_init(int ch)
+{
+ struct physmap_flash_data pdata = {
+ .width = TX4927_EBUSC_WIDTH(ch) / 8,
+ };
+ unsigned long start = txx9_ce_res[ch].start;
+ unsigned long size = txx9_ce_res[ch].end - start + 1;
+
+ if (!(TX4927_EBUSC_CR(ch) & 0x8))
+ return; /* disabled */
+ txx9_physmap_flash_init(ch, start, size, &pdata);
+}
+
+static void __init tx4927_stop_unused_modules(void)
+{
+ __u64 pcfg, rst = 0, ckd = 0;
+ char buf[128];
+
+ buf[0] = '\0';
+ local_irq_disable();
+ pcfg = ____raw_readq(&tx4927_ccfgptr->pcfg);
+ if (!(pcfg & TX4927_PCFG_SEL2)) {
+ rst |= TX4927_CLKCTR_ACLRST;
+ ckd |= TX4927_CLKCTR_ACLCKD;
+ strcat(buf, " ACLC");
+ }
+ if (rst | ckd) {
+ txx9_set64(&tx4927_ccfgptr->clkctr, rst);
+ txx9_set64(&tx4927_ccfgptr->clkctr, ckd);
+ }
+ local_irq_enable();
+ if (buf[0])
+ pr_info("%s: stop%s\n", txx9_pcode_str, buf);
+}
+
+static int __init tx4927_late_init(void)
+{
+ if (txx9_pcode != 0x4927)
+ return -ENODEV;
+ tx4927_stop_unused_modules();
+ return 0;
+}
+late_initcall(tx4927_late_init);
diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c
index f3040b9ba05..25819ff1c35 100644
--- a/arch/mips/txx9/generic/setup_tx4938.c
+++ b/arch/mips/txx9/generic/setup_tx4938.c
@@ -14,6 +14,11 @@
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/param.h>
+#include <linux/ptrace.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/reboot.h>
+#include <asm/traps.h>
#include <asm/txx9irq.h>
#include <asm/txx9tmr.h>
#include <asm/txx9pio.h>
@@ -22,6 +27,10 @@
static void __init tx4938_wdr_init(void)
{
+ /* report watchdog reset status */
+ if (____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_WDRST)
+ pr_warning("Watchdog reset detected at 0x%lx\n",
+ read_c0_errorepc());
/* clear WatchDogReset (W1C) */
tx4938_ccfg_set(TX4938_CCFG_WDRST);
/* do reset on watchdog */
@@ -33,6 +42,47 @@ void __init tx4938_wdt_init(void)
txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL);
}
+static void tx4938_machine_restart(char *command)
+{
+ local_irq_disable();
+ pr_emerg("Rebooting (with %s watchdog reset)...\n",
+ (____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_WDREXEN) ?
+ "external" : "internal");
+ /* clear watchdog status */
+ tx4938_ccfg_set(TX4938_CCFG_WDRST); /* W1C */
+ txx9_wdt_now(TX4938_TMR_REG(2) & 0xfffffffffULL);
+ while (!(____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_WDRST))
+ ;
+ mdelay(10);
+ if (____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_WDREXEN) {
+ pr_emerg("Rebooting (with internal watchdog reset)...\n");
+ /* External WDRST failed. Do internal watchdog reset */
+ tx4938_ccfg_clear(TX4938_CCFG_WDREXEN);
+ }
+ /* fallback */
+ (*_machine_halt)();
+}
+
+void show_registers(struct pt_regs *regs);
+static int tx4938_be_handler(struct pt_regs *regs, int is_fixup)
+{
+ int data = regs->cp0_cause & 4;
+ console_verbose();
+ pr_err("%cBE exception at %#lx\n", data ? 'D' : 'I', regs->cp0_epc);
+ pr_err("ccfg:%llx, toea:%llx\n",
+ (unsigned long long)____raw_readq(&tx4938_ccfgptr->ccfg),
+ (unsigned long long)____raw_readq(&tx4938_ccfgptr->toea));
+#ifdef CONFIG_PCI
+ tx4927_report_pcic_status();
+#endif
+ show_registers(regs);
+ panic("BusError!");
+}
+static void __init tx4938_be_init(void)
+{
+ board_be_handler = tx4938_be_handler;
+}
+
static struct resource tx4938_sdram_resource[4];
static struct resource tx4938_sram_resource;
@@ -47,6 +97,7 @@ void __init tx4938_setup(void)
txx9_reg_res_init(TX4938_REV_PCODE(), TX4938_REG_BASE,
TX4938_REG_SIZE);
+ set_c0_config(TX49_CONF_CWFON);
/* SDRAMC,EBUSC are configured by PROM */
for (i = 0; i < 8; i++) {
@@ -227,6 +278,9 @@ void __init tx4938_setup(void)
TX4938_CLKCTR_ETH1CKD);
}
}
+
+ _machine_restart = tx4938_machine_restart;
+ board_be_init = tx4938_be_init;
}
void __init tx4938_time_init(unsigned int tmrnr)
@@ -268,3 +322,118 @@ void __init tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1)
if (addr1 && (pcfg & TX4938_PCFG_ETH1_SEL))
txx9_ethaddr_init(TXX9_IRQ_BASE + TX4938_IR_ETH1, addr1);
}
+
+void __init tx4938_mtd_init(int ch)
+{
+ struct physmap_flash_data pdata = {
+ .width = TX4938_EBUSC_WIDTH(ch) / 8,
+ };
+ unsigned long start = txx9_ce_res[ch].start;
+ unsigned long size = txx9_ce_res[ch].end - start + 1;
+
+ if (!(TX4938_EBUSC_CR(ch) & 0x8))
+ return; /* disabled */
+ txx9_physmap_flash_init(ch, start, size, &pdata);
+}
+
+void __init tx4938_ata_init(unsigned int irq, unsigned int shift, int tune)
+{
+ struct platform_device *pdev;
+ struct resource res[] = {
+ {
+ /* .start and .end are filled in later */
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+ struct tx4938ide_platform_info pdata = {
+ .ioport_shift = shift,
+ /*
+ * The IDE driver should not change bus timings if other ISA
+ * devices existed.
+ */
+ .gbus_clock = tune ? txx9_gbus_clock : 0,
+ };
+ u64 ebccr;
+ int i;
+
+ if ((__raw_readq(&tx4938_ccfgptr->pcfg) &
+ (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL))
+ != TX4938_PCFG_ATA_SEL)
+ return;
+ for (i = 0; i < 8; i++) {
+ /* check EBCCRn.ISA, EBCCRn.BSZ, EBCCRn.ME */
+ ebccr = __raw_readq(&tx4938_ebuscptr->cr[i]);
+ if ((ebccr & 0x00f00008) == 0x00e00008)
+ break;
+ }
+ if (i == 8)
+ return;
+ pdata.ebus_ch = i;
+ res[0].start = ((ebccr >> 48) << 20) + 0x10000;
+ res[0].end = res[0].start + 0x20000 - 1;
+ pdev = platform_device_alloc("tx4938ide", -1);
+ if (!pdev ||
+ platform_device_add_resources(pdev, res, ARRAY_SIZE(res)) ||
+ platform_device_add_data(pdev, &pdata, sizeof(pdata)) ||
+ platform_device_add(pdev))
+ platform_device_put(pdev);
+}
+
+static void __init tx4938_stop_unused_modules(void)
+{
+ __u64 pcfg, rst = 0, ckd = 0;
+ char buf[128];
+
+ buf[0] = '\0';
+ local_irq_disable();
+ pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg);
+ switch (txx9_pcode) {
+ case 0x4937:
+ if (!(pcfg & TX4938_PCFG_SEL2)) {
+ rst |= TX4938_CLKCTR_ACLRST;
+ ckd |= TX4938_CLKCTR_ACLCKD;
+ strcat(buf, " ACLC");
+ }
+ break;
+ case 0x4938:
+ if (!(pcfg & TX4938_PCFG_SEL2) ||
+ (pcfg & TX4938_PCFG_ETH0_SEL)) {
+ rst |= TX4938_CLKCTR_ACLRST;
+ ckd |= TX4938_CLKCTR_ACLCKD;
+ strcat(buf, " ACLC");
+ }
+ if ((pcfg &
+ (TX4938_PCFG_ATA_SEL | TX4938_PCFG_ISA_SEL |
+ TX4938_PCFG_NDF_SEL))
+ != TX4938_PCFG_NDF_SEL) {
+ rst |= TX4938_CLKCTR_NDFRST;
+ ckd |= TX4938_CLKCTR_NDFCKD;
+ strcat(buf, " NDFMC");
+ }
+ if (!(pcfg & TX4938_PCFG_SPI_SEL)) {
+ rst |= TX4938_CLKCTR_SPIRST;
+ ckd |= TX4938_CLKCTR_SPICKD;
+ strcat(buf, " SPI");
+ }
+ break;
+ }
+ if (rst | ckd) {
+ txx9_set64(&tx4938_ccfgptr->clkctr, rst);
+ txx9_set64(&tx4938_ccfgptr->clkctr, ckd);
+ }
+ local_irq_enable();
+ if (buf[0])
+ pr_info("%s: stop%s\n", txx9_pcode_str, buf);
+}
+
+static int __init tx4938_late_init(void)
+{
+ if (txx9_pcode != 0x4937 && txx9_pcode != 0x4938)
+ return -ENODEV;
+ tx4938_stop_unused_modules();
+ return 0;
+}
+late_initcall(tx4938_late_init);
diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c
new file mode 100644
index 00000000000..6c0049a5bbc
--- /dev/null
+++ b/arch/mips/txx9/generic/setup_tx4939.c
@@ -0,0 +1,506 @@
+/*
+ * TX4939 setup routines
+ * Based on linux/arch/mips/txx9/generic/setup_tx4938.c,
+ * and RBTX49xx patch from CELF patch archive.
+ *
+ * 2003-2005 (c) MontaVista Software, Inc.
+ * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/notifier.h>
+#include <linux/sysdev.h>
+#include <linux/ethtool.h>
+#include <linux/param.h>
+#include <linux/ptrace.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/traps.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9tmr.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/tx4939.h>
+
+static void __init tx4939_wdr_init(void)
+{
+ /* report watchdog reset status */
+ if (____raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_WDRST)
+ pr_warning("Watchdog reset detected at 0x%lx\n",
+ read_c0_errorepc());
+ /* clear WatchDogReset (W1C) */
+ tx4939_ccfg_set(TX4939_CCFG_WDRST);
+ /* do reset on watchdog */
+ tx4939_ccfg_set(TX4939_CCFG_WR);
+}
+
+void __init tx4939_wdt_init(void)
+{
+ txx9_wdt_init(TX4939_TMR_REG(2) & 0xfffffffffULL);
+}
+
+static void tx4939_machine_restart(char *command)
+{
+ local_irq_disable();
+ pr_emerg("Rebooting (with %s watchdog reset)...\n",
+ (____raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_WDREXEN) ?
+ "external" : "internal");
+ /* clear watchdog status */
+ tx4939_ccfg_set(TX4939_CCFG_WDRST); /* W1C */
+ txx9_wdt_now(TX4939_TMR_REG(2) & 0xfffffffffULL);
+ while (!(____raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_WDRST))
+ ;
+ mdelay(10);
+ if (____raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_WDREXEN) {
+ pr_emerg("Rebooting (with internal watchdog reset)...\n");
+ /* External WDRST failed. Do internal watchdog reset */
+ tx4939_ccfg_clear(TX4939_CCFG_WDREXEN);
+ }
+ /* fallback */
+ (*_machine_halt)();
+}
+
+void show_registers(struct pt_regs *regs);
+static int tx4939_be_handler(struct pt_regs *regs, int is_fixup)
+{
+ int data = regs->cp0_cause & 4;
+ console_verbose();
+ pr_err("%cBE exception at %#lx\n",
+ data ? 'D' : 'I', regs->cp0_epc);
+ pr_err("ccfg:%llx, toea:%llx\n",
+ (unsigned long long)____raw_readq(&tx4939_ccfgptr->ccfg),
+ (unsigned long long)____raw_readq(&tx4939_ccfgptr->toea));
+#ifdef CONFIG_PCI
+ tx4927_report_pcic_status();
+#endif
+ show_registers(regs);
+ panic("BusError!");
+}
+static void __init tx4939_be_init(void)
+{
+ board_be_handler = tx4939_be_handler;
+}
+
+static struct resource tx4939_sdram_resource[4];
+static struct resource tx4939_sram_resource;
+#define TX4939_SRAM_SIZE 0x800
+
+void __init tx4939_add_memory_regions(void)
+{
+ int i;
+ unsigned long start, size;
+ u64 win;
+
+ for (i = 0; i < 4; i++) {
+ if (!((__u32)____raw_readq(&tx4939_ddrcptr->winen) & (1 << i)))
+ continue;
+ win = ____raw_readq(&tx4939_ddrcptr->win[i]);
+ start = (unsigned long)(win >> 48);
+ size = (((unsigned long)(win >> 32) & 0xffff) + 1) - start;
+ add_memory_region(start << 20, size << 20, BOOT_MEM_RAM);
+ }
+}
+
+void __init tx4939_setup(void)
+{
+ int i;
+ __u32 divmode;
+ __u64 pcfg;
+ int cpuclk = 0;
+
+ txx9_reg_res_init(TX4939_REV_PCODE(), TX4939_REG_BASE,
+ TX4939_REG_SIZE);
+ set_c0_config(TX49_CONF_CWFON);
+
+ /* SDRAMC,EBUSC are configured by PROM */
+ for (i = 0; i < 4; i++) {
+ if (!(TX4939_EBUSC_CR(i) & 0x8))
+ continue; /* disabled */
+ txx9_ce_res[i].start = (unsigned long)TX4939_EBUSC_BA(i);
+ txx9_ce_res[i].end =
+ txx9_ce_res[i].start + TX4939_EBUSC_SIZE(i) - 1;
+ request_resource(&iomem_resource, &txx9_ce_res[i]);
+ }
+
+ /* clocks */
+ if (txx9_master_clock) {
+ /* calculate cpu_clock from master_clock */
+ divmode = (__u32)____raw_readq(&tx4939_ccfgptr->ccfg) &
+ TX4939_CCFG_MULCLK_MASK;
+ cpuclk = txx9_master_clock * 20 / 2;
+ switch (divmode) {
+ case TX4939_CCFG_MULCLK_8:
+ cpuclk = cpuclk / 3 * 4 /* / 6 * 8 */; break;
+ case TX4939_CCFG_MULCLK_9:
+ cpuclk = cpuclk / 2 * 3 /* / 6 * 9 */; break;
+ case TX4939_CCFG_MULCLK_10:
+ cpuclk = cpuclk / 3 * 5 /* / 6 * 10 */; break;
+ case TX4939_CCFG_MULCLK_11:
+ cpuclk = cpuclk / 6 * 11; break;
+ case TX4939_CCFG_MULCLK_12:
+ cpuclk = cpuclk * 2 /* / 6 * 12 */; break;
+ case TX4939_CCFG_MULCLK_13:
+ cpuclk = cpuclk / 6 * 13; break;
+ case TX4939_CCFG_MULCLK_14:
+ cpuclk = cpuclk / 3 * 7 /* / 6 * 14 */; break;
+ case TX4939_CCFG_MULCLK_15:
+ cpuclk = cpuclk / 2 * 5 /* / 6 * 15 */; break;
+ }
+ txx9_cpu_clock = cpuclk;
+ } else {
+ if (txx9_cpu_clock == 0)
+ txx9_cpu_clock = 400000000; /* 400MHz */
+ /* calculate master_clock from cpu_clock */
+ cpuclk = txx9_cpu_clock;
+ divmode = (__u32)____raw_readq(&tx4939_ccfgptr->ccfg) &
+ TX4939_CCFG_MULCLK_MASK;
+ switch (divmode) {
+ case TX4939_CCFG_MULCLK_8:
+ txx9_master_clock = cpuclk * 6 / 8; break;
+ case TX4939_CCFG_MULCLK_9:
+ txx9_master_clock = cpuclk * 6 / 9; break;
+ case TX4939_CCFG_MULCLK_10:
+ txx9_master_clock = cpuclk * 6 / 10; break;
+ case TX4939_CCFG_MULCLK_11:
+ txx9_master_clock = cpuclk * 6 / 11; break;
+ case TX4939_CCFG_MULCLK_12:
+ txx9_master_clock = cpuclk * 6 / 12; break;
+ case TX4939_CCFG_MULCLK_13:
+ txx9_master_clock = cpuclk * 6 / 13; break;
+ case TX4939_CCFG_MULCLK_14:
+ txx9_master_clock = cpuclk * 6 / 14; break;
+ case TX4939_CCFG_MULCLK_15:
+ txx9_master_clock = cpuclk * 6 / 15; break;
+ }
+ txx9_master_clock /= 10; /* * 2 / 20 */
+ }
+ /* calculate gbus_clock from cpu_clock */
+ divmode = (__u32)____raw_readq(&tx4939_ccfgptr->ccfg) &
+ TX4939_CCFG_YDIVMODE_MASK;
+ txx9_gbus_clock = txx9_cpu_clock;
+ switch (divmode) {
+ case TX4939_CCFG_YDIVMODE_2:
+ txx9_gbus_clock /= 2; break;
+ case TX4939_CCFG_YDIVMODE_3:
+ txx9_gbus_clock /= 3; break;
+ case TX4939_CCFG_YDIVMODE_5:
+ txx9_gbus_clock /= 5; break;
+ case TX4939_CCFG_YDIVMODE_6:
+ txx9_gbus_clock /= 6; break;
+ }
+ /* change default value to udelay/mdelay take reasonable time */
+ loops_per_jiffy = txx9_cpu_clock / HZ / 2;
+
+ /* CCFG */
+ tx4939_wdr_init();
+ /* clear BusErrorOnWrite flag (W1C) */
+ tx4939_ccfg_set(TX4939_CCFG_WDRST | TX4939_CCFG_BEOW);
+ /* enable Timeout BusError */
+ if (txx9_ccfg_toeon)
+ tx4939_ccfg_set(TX4939_CCFG_TOE);
+
+ /* DMA selection */
+ txx9_clear64(&tx4939_ccfgptr->pcfg, TX4939_PCFG_DMASEL_ALL);
+
+ /* Use external clock for external arbiter */
+ if (!(____raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_PCIARB))
+ txx9_clear64(&tx4939_ccfgptr->pcfg, TX4939_PCFG_PCICLKEN_ALL);
+
+ pr_info("%s -- %dMHz(M%dMHz,G%dMHz) CRIR:%08x CCFG:%llx PCFG:%llx\n",
+ txx9_pcode_str,
+ (cpuclk + 500000) / 1000000,
+ (txx9_master_clock + 500000) / 1000000,
+ (txx9_gbus_clock + 500000) / 1000000,
+ (__u32)____raw_readq(&tx4939_ccfgptr->crir),
+ (unsigned long long)____raw_readq(&tx4939_ccfgptr->ccfg),
+ (unsigned long long)____raw_readq(&tx4939_ccfgptr->pcfg));
+
+ pr_info("%s DDRC -- EN:%08x", txx9_pcode_str,
+ (__u32)____raw_readq(&tx4939_ddrcptr->winen));
+ for (i = 0; i < 4; i++) {
+ __u64 win = ____raw_readq(&tx4939_ddrcptr->win[i]);
+ if (!((__u32)____raw_readq(&tx4939_ddrcptr->winen) & (1 << i)))
+ continue; /* disabled */
+ printk(KERN_CONT " #%d:%016llx", i, (unsigned long long)win);
+ tx4939_sdram_resource[i].name = "DDR SDRAM";
+ tx4939_sdram_resource[i].start =
+ (unsigned long)(win >> 48) << 20;
+ tx4939_sdram_resource[i].end =
+ ((((unsigned long)(win >> 32) & 0xffff) + 1) <<
+ 20) - 1;
+ tx4939_sdram_resource[i].flags = IORESOURCE_MEM;
+ request_resource(&iomem_resource, &tx4939_sdram_resource[i]);
+ }
+ printk(KERN_CONT "\n");
+
+ /* SRAM */
+ if (____raw_readq(&tx4939_sramcptr->cr) & 1) {
+ unsigned int size = TX4939_SRAM_SIZE;
+ tx4939_sram_resource.name = "SRAM";
+ tx4939_sram_resource.start =
+ (____raw_readq(&tx4939_sramcptr->cr) >> (39-11))
+ & ~(size - 1);
+ tx4939_sram_resource.end =
+ tx4939_sram_resource.start + TX4939_SRAM_SIZE - 1;
+ tx4939_sram_resource.flags = IORESOURCE_MEM;
+ request_resource(&iomem_resource, &tx4939_sram_resource);
+ }
+
+ /* TMR */
+ /* disable all timers */
+ for (i = 0; i < TX4939_NR_TMR; i++)
+ txx9_tmr_init(TX4939_TMR_REG(i) & 0xfffffffffULL);
+
+ /* DMA */
+ for (i = 0; i < 2; i++)
+ ____raw_writeq(TX4938_DMA_MCR_MSTEN,
+ (void __iomem *)(TX4939_DMA_REG(i) + 0x50));
+
+ /* set PCIC1 reset (required to prevent hangup on BIST) */
+ txx9_set64(&tx4939_ccfgptr->clkctr, TX4939_CLKCTR_PCI1RST);
+ pcfg = ____raw_readq(&tx4939_ccfgptr->pcfg);
+ if (pcfg & (TX4939_PCFG_ET0MODE | TX4939_PCFG_ET1MODE)) {
+ mdelay(1); /* at least 128 cpu clock */
+ /* clear PCIC1 reset */
+ txx9_clear64(&tx4939_ccfgptr->clkctr, TX4939_CLKCTR_PCI1RST);
+ } else {
+ pr_info("%s: stop PCIC1\n", txx9_pcode_str);
+ /* stop PCIC1 */
+ txx9_set64(&tx4939_ccfgptr->clkctr, TX4939_CLKCTR_PCI1CKD);
+ }
+ if (!(pcfg & TX4939_PCFG_ET0MODE)) {
+ pr_info("%s: stop ETH0\n", txx9_pcode_str);
+ txx9_set64(&tx4939_ccfgptr->clkctr, TX4939_CLKCTR_ETH0RST);
+ txx9_set64(&tx4939_ccfgptr->clkctr, TX4939_CLKCTR_ETH0CKD);
+ }
+ if (!(pcfg & TX4939_PCFG_ET1MODE)) {
+ pr_info("%s: stop ETH1\n", txx9_pcode_str);
+ txx9_set64(&tx4939_ccfgptr->clkctr, TX4939_CLKCTR_ETH1RST);
+ txx9_set64(&tx4939_ccfgptr->clkctr, TX4939_CLKCTR_ETH1CKD);
+ }
+
+ _machine_restart = tx4939_machine_restart;
+ board_be_init = tx4939_be_init;
+}
+
+void __init tx4939_time_init(unsigned int tmrnr)
+{
+ if (____raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_TINTDIS)
+ txx9_clockevent_init(TX4939_TMR_REG(tmrnr) & 0xfffffffffULL,
+ TXX9_IRQ_BASE + TX4939_IR_TMR(tmrnr),
+ TXX9_IMCLK);
+}
+
+void __init tx4939_sio_init(unsigned int sclk, unsigned int cts_mask)
+{
+ int i;
+ unsigned int ch_mask = 0;
+ __u64 pcfg = __raw_readq(&tx4939_ccfgptr->pcfg);
+
+ cts_mask |= ~1; /* only SIO0 have RTS/CTS */
+ if ((pcfg & TX4939_PCFG_SIO2MODE_MASK) != TX4939_PCFG_SIO2MODE_SIO0)
+ cts_mask |= 1 << 0; /* disable SIO0 RTS/CTS by PCFG setting */
+ if ((pcfg & TX4939_PCFG_SIO2MODE_MASK) != TX4939_PCFG_SIO2MODE_SIO2)
+ ch_mask |= 1 << 2; /* disable SIO2 by PCFG setting */
+ if (pcfg & TX4939_PCFG_SIO3MODE)
+ ch_mask |= 1 << 3; /* disable SIO3 by PCFG setting */
+ for (i = 0; i < 4; i++) {
+ if ((1 << i) & ch_mask)
+ continue;
+ txx9_sio_init(TX4939_SIO_REG(i) & 0xfffffffffULL,
+ TXX9_IRQ_BASE + TX4939_IR_SIO(i),
+ i, sclk, (1 << i) & cts_mask);
+ }
+}
+
+#if defined(CONFIG_TC35815) || defined(CONFIG_TC35815_MODULE)
+static int tx4939_get_eth_speed(struct net_device *dev)
+{
+ struct ethtool_cmd cmd = { ETHTOOL_GSET };
+ int speed = 100; /* default 100Mbps */
+ int err;
+ if (!dev->ethtool_ops || !dev->ethtool_ops->get_settings)
+ return speed;
+ err = dev->ethtool_ops->get_settings(dev, &cmd);
+ if (err < 0)
+ return speed;
+ speed = cmd.speed == SPEED_100 ? 100 : 10;
+ return speed;
+}
+static int tx4939_netdev_event(struct notifier_block *this,
+ unsigned long event,
+ void *ptr)
+{
+ struct net_device *dev = ptr;
+ if (event == NETDEV_CHANGE && netif_carrier_ok(dev)) {
+ __u64 bit = 0;
+ if (dev->irq == TXX9_IRQ_BASE + TX4939_IR_ETH(0))
+ bit = TX4939_PCFG_SPEED0;
+ else if (dev->irq == TXX9_IRQ_BASE + TX4939_IR_ETH(1))
+ bit = TX4939_PCFG_SPEED1;
+ if (bit) {
+ int speed = tx4939_get_eth_speed(dev);
+ if (speed == 100)
+ txx9_set64(&tx4939_ccfgptr->pcfg, bit);
+ else
+ txx9_clear64(&tx4939_ccfgptr->pcfg, bit);
+ }
+ }
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block tx4939_netdev_notifier = {
+ .notifier_call = tx4939_netdev_event,
+ .priority = 1,
+};
+
+void __init tx4939_ethaddr_init(unsigned char *addr0, unsigned char *addr1)
+{
+ u64 pcfg = __raw_readq(&tx4939_ccfgptr->pcfg);
+
+ if (addr0 && (pcfg & TX4939_PCFG_ET0MODE))
+ txx9_ethaddr_init(TXX9_IRQ_BASE + TX4939_IR_ETH(0), addr0);
+ if (addr1 && (pcfg & TX4939_PCFG_ET1MODE))
+ txx9_ethaddr_init(TXX9_IRQ_BASE + TX4939_IR_ETH(1), addr1);
+ register_netdevice_notifier(&tx4939_netdev_notifier);
+}
+#else
+void __init tx4939_ethaddr_init(unsigned char *addr0, unsigned char *addr1)
+{
+}
+#endif
+
+void __init tx4939_mtd_init(int ch)
+{
+ struct physmap_flash_data pdata = {
+ .width = TX4939_EBUSC_WIDTH(ch) / 8,
+ };
+ unsigned long start = txx9_ce_res[ch].start;
+ unsigned long size = txx9_ce_res[ch].end - start + 1;
+
+ if (!(TX4939_EBUSC_CR(ch) & 0x8))
+ return; /* disabled */
+ txx9_physmap_flash_init(ch, start, size, &pdata);
+}
+
+#define TX4939_ATA_REG_PHYS(ch) (TX4939_ATA_REG(ch) & 0xfffffffffULL)
+void __init tx4939_ata_init(void)
+{
+ static struct resource ata0_res[] = {
+ {
+ .start = TX4939_ATA_REG_PHYS(0),
+ .end = TX4939_ATA_REG_PHYS(0) + 0x1000 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = TXX9_IRQ_BASE + TX4939_IR_ATA(0),
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+ static struct resource ata1_res[] = {
+ {
+ .start = TX4939_ATA_REG_PHYS(1),
+ .end = TX4939_ATA_REG_PHYS(1) + 0x1000 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = TXX9_IRQ_BASE + TX4939_IR_ATA(1),
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+ static struct platform_device ata0_dev = {
+ .name = "tx4939ide",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(ata0_res),
+ .resource = ata0_res,
+ };
+ static struct platform_device ata1_dev = {
+ .name = "tx4939ide",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(ata1_res),
+ .resource = ata1_res,
+ };
+ __u64 pcfg = __raw_readq(&tx4939_ccfgptr->pcfg);
+
+ if (pcfg & TX4939_PCFG_ATA0MODE)
+ platform_device_register(&ata0_dev);
+ if ((pcfg & (TX4939_PCFG_ATA1MODE |
+ TX4939_PCFG_ET1MODE |
+ TX4939_PCFG_ET0MODE)) == TX4939_PCFG_ATA1MODE)
+ platform_device_register(&ata1_dev);
+}
+
+static void __init tx4939_stop_unused_modules(void)
+{
+ __u64 pcfg, rst = 0, ckd = 0;
+ char buf[128];
+
+ buf[0] = '\0';
+ local_irq_disable();
+ pcfg = ____raw_readq(&tx4939_ccfgptr->pcfg);
+ if ((pcfg & TX4939_PCFG_I2SMODE_MASK) !=
+ TX4939_PCFG_I2SMODE_ACLC) {
+ rst |= TX4939_CLKCTR_ACLRST;
+ ckd |= TX4939_CLKCTR_ACLCKD;
+ strcat(buf, " ACLC");
+ }
+ if ((pcfg & TX4939_PCFG_I2SMODE_MASK) !=
+ TX4939_PCFG_I2SMODE_I2S &&
+ (pcfg & TX4939_PCFG_I2SMODE_MASK) !=
+ TX4939_PCFG_I2SMODE_I2S_ALT) {
+ rst |= TX4939_CLKCTR_I2SRST;
+ ckd |= TX4939_CLKCTR_I2SCKD;
+ strcat(buf, " I2S");
+ }
+ if (!(pcfg & TX4939_PCFG_ATA0MODE)) {
+ rst |= TX4939_CLKCTR_ATA0RST;
+ ckd |= TX4939_CLKCTR_ATA0CKD;
+ strcat(buf, " ATA0");
+ }
+ if (!(pcfg & TX4939_PCFG_ATA1MODE)) {
+ rst |= TX4939_CLKCTR_ATA1RST;
+ ckd |= TX4939_CLKCTR_ATA1CKD;
+ strcat(buf, " ATA1");
+ }
+ if (pcfg & TX4939_PCFG_SPIMODE) {
+ rst |= TX4939_CLKCTR_SPIRST;
+ ckd |= TX4939_CLKCTR_SPICKD;
+ strcat(buf, " SPI");
+ }
+ if (!(pcfg & (TX4939_PCFG_VSSMODE | TX4939_PCFG_VPSMODE))) {
+ rst |= TX4939_CLKCTR_VPCRST;
+ ckd |= TX4939_CLKCTR_VPCCKD;
+ strcat(buf, " VPC");
+ }
+ if ((pcfg & TX4939_PCFG_SIO2MODE_MASK) != TX4939_PCFG_SIO2MODE_SIO2) {
+ rst |= TX4939_CLKCTR_SIO2RST;
+ ckd |= TX4939_CLKCTR_SIO2CKD;
+ strcat(buf, " SIO2");
+ }
+ if (pcfg & TX4939_PCFG_SIO3MODE) {
+ rst |= TX4939_CLKCTR_SIO3RST;
+ ckd |= TX4939_CLKCTR_SIO3CKD;
+ strcat(buf, " SIO3");
+ }
+ if (rst | ckd) {
+ txx9_set64(&tx4939_ccfgptr->clkctr, rst);
+ txx9_set64(&tx4939_ccfgptr->clkctr, ckd);
+ }
+ local_irq_enable();
+ if (buf[0])
+ pr_info("%s: stop%s\n", txx9_pcode_str, buf);
+}
+
+static int __init tx4939_late_init(void)
+{
+ if (txx9_pcode != 0x4939)
+ return -ENODEV;
+ tx4939_stop_unused_modules();
+ return 0;
+}
+late_initcall(tx4939_late_init);
diff --git a/arch/mips/txx9/rbtx4938/spi_eeprom.c b/arch/mips/txx9/generic/spi_eeprom.c
index a7ea8b041c1..75c347238f4 100644
--- a/arch/mips/txx9/rbtx4938/spi_eeprom.c
+++ b/arch/mips/txx9/generic/spi_eeprom.c
@@ -18,29 +18,31 @@
#define AT250X0_PAGE_SIZE 8
/* register board information for at25 driver */
-int __init spi_eeprom_register(int chipid)
+int __init spi_eeprom_register(int busid, int chipid, int size)
{
- static struct spi_eeprom eeprom = {
- .name = "at250x0",
- .byte_len = 128,
- .page_size = AT250X0_PAGE_SIZE,
- .flags = EE_ADDR1,
- };
struct spi_board_info info = {
.modalias = "at25",
.max_speed_hz = 1500000, /* 1.5Mbps */
- .bus_num = 0,
+ .bus_num = busid,
.chip_select = chipid,
- .platform_data = &eeprom,
/* Mode 0: High-Active, Sample-Then-Shift */
};
-
+ struct spi_eeprom *eeprom;
+ eeprom = kzalloc(sizeof(*eeprom), GFP_KERNEL);
+ if (!eeprom)
+ return -ENOMEM;
+ strcpy(eeprom->name, "at250x0");
+ eeprom->byte_len = size;
+ eeprom->page_size = AT250X0_PAGE_SIZE;
+ eeprom->flags = EE_ADDR1;
+ info.platform_data = eeprom;
return spi_register_board_info(&info, 1);
}
/* simple temporary spi driver to provide early access to seeprom. */
static struct read_param {
+ int busid;
int chipid;
int address;
unsigned char *buf;
@@ -57,7 +59,8 @@ static int __init early_seeprom_probe(struct spi_device *spi)
dev_info(&spi->dev, "spiclk %u KHz.\n",
(spi->max_speed_hz + 500) / 1000);
- if (read_param->chipid != spi->chip_select)
+ if (read_param->busid != spi->master->bus_num ||
+ read_param->chipid != spi->chip_select)
return -ENODEV;
while (len > 0) {
/* spi_write_then_read can only work with small chunk */
@@ -80,11 +83,12 @@ static struct spi_driver early_seeprom_driver __initdata = {
.probe = early_seeprom_probe,
};
-int __init spi_eeprom_read(int chipid, int address,
+int __init spi_eeprom_read(int busid, int chipid, int address,
unsigned char *buf, int len)
{
int ret;
struct read_param param = {
+ .busid = busid,
.chipid = chipid,
.address = address,
.buf = buf,
diff --git a/arch/mips/txx9/jmr3927/prom.c b/arch/mips/txx9/jmr3927/prom.c
index 70c4c8ec3e8..c899c0c087a 100644
--- a/arch/mips/txx9/jmr3927/prom.c
+++ b/arch/mips/txx9/jmr3927/prom.c
@@ -47,7 +47,6 @@ void __init jmr3927_prom_init(void)
if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0)
printk(KERN_ERR "TX3927 TLB off\n");
- prom_init_cmdline();
add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM);
txx9_sio_putchar_init(TX3927_SIO_REG(1));
}
diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c
index 87db41be8a5..25e50a7be38 100644
--- a/arch/mips/txx9/jmr3927/setup.c
+++ b/arch/mips/txx9/jmr3927/setup.c
@@ -62,7 +62,6 @@ static void __init jmr3927_time_init(void)
}
#define DO_WRITE_THROUGH
-#define DO_ENABLE_CACHE
static void jmr3927_board_init(void);
@@ -77,11 +76,6 @@ static void __init jmr3927_mem_setup(void)
/* cache setup */
{
unsigned int conf;
-#ifdef DO_ENABLE_CACHE
- int mips_ic_disable = 0, mips_dc_disable = 0;
-#else
- int mips_ic_disable = 1, mips_dc_disable = 1;
-#endif
#ifdef DO_WRITE_THROUGH
int mips_config_cwfon = 0;
int mips_config_wbon = 0;
@@ -91,10 +85,7 @@ static void __init jmr3927_mem_setup(void)
#endif
conf = read_c0_conf();
- conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE |
- TX39_CONF_WBON | TX39_CONF_CWFON);
- conf |= mips_ic_disable ? 0 : TX39_CONF_ICE;
- conf |= mips_dc_disable ? 0 : TX39_CONF_DCE;
+ conf &= ~(TX39_CONF_WBON | TX39_CONF_CWFON);
conf |= mips_config_wbon ? TX39_CONF_WBON : 0;
conf |= mips_config_cwfon ? TX39_CONF_CWFON : 0;
@@ -199,11 +190,25 @@ static void __init jmr3927_rtc_init(void)
platform_device_register_simple("rtc-ds1742", -1, &res, 1);
}
+static void __init jmr3927_mtd_init(void)
+{
+ int i;
+
+ for (i = 0; i < 2; i++)
+ tx3927_mtd_init(i);
+}
+
static void __init jmr3927_device_init(void)
{
+ unsigned long iocled_base = JMR3927_IOC_LED_ADDR - IO_BASE;
+#ifdef __LITTLE_ENDIAN
+ iocled_base |= 1;
+#endif
__swizzle_addr_b = jmr3927_swizzle_addr_b;
jmr3927_rtc_init();
tx3927_wdt_init();
+ jmr3927_mtd_init();
+ txx9_iocled_init(iocled_base, -1, 8, 1, "green", NULL);
}
struct txx9_board_vec jmr3927_vec __initdata = {
diff --git a/arch/mips/txx9/rbtx4927/irq.c b/arch/mips/txx9/rbtx4927/irq.c
index 00cd5231da3..9c14ebb26cb 100644
--- a/arch/mips/txx9/rbtx4927/irq.c
+++ b/arch/mips/txx9/rbtx4927/irq.c
@@ -133,15 +133,20 @@ static int toshiba_rbtx4927_irq_nested(int sw_irq)
u8 level3;
level3 = readb(rbtx4927_imstat_addr) & 0x1f;
- if (level3)
- sw_irq = RBTX4927_IRQ_IOC + fls(level3) - 1;
- return sw_irq;
+ if (unlikely(!level3))
+ return -1;
+ return RBTX4927_IRQ_IOC + __fls8(level3);
}
static void __init toshiba_rbtx4927_irq_ioc_init(void)
{
int i;
+ /* mask all IOC interrupts */
+ writeb(0, rbtx4927_imask_addr);
+ /* clear SoftInt interrupts */
+ writeb(0, rbtx4927_softint_addr);
+
for (i = RBTX4927_IRQ_IOC;
i < RBTX4927_IRQ_IOC + RBTX4927_NR_IRQ_IOC; i++)
set_irq_chip_and_handler(i, &toshiba_rbtx4927_irq_ioc_type,
diff --git a/arch/mips/txx9/rbtx4927/prom.c b/arch/mips/txx9/rbtx4927/prom.c
index 1dc0a5b1956..cc97c6a6011 100644
--- a/arch/mips/txx9/rbtx4927/prom.c
+++ b/arch/mips/txx9/rbtx4927/prom.c
@@ -36,7 +36,6 @@
void __init rbtx4927_prom_init(void)
{
- prom_init_cmdline();
add_memory_region(0, tx4927_get_mem_size(), BOOT_MEM_RAM);
txx9_sio_putchar_init(TX4927_SIO_REG(0) & 0xfffffffffULL);
}
diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c
index 0d39bafea79..4a74423b2ba 100644
--- a/arch/mips/txx9/rbtx4927/setup.c
+++ b/arch/mips/txx9/rbtx4927/setup.c
@@ -48,6 +48,7 @@
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <asm/io.h>
#include <asm/reboot.h>
#include <asm/txx9/generic.h>
@@ -185,14 +186,8 @@ static void __init rbtx4937_clock_init(void);
static void __init rbtx4927_mem_setup(void)
{
- u32 cp0_config;
char *argptr;
- /* enable caches -- HCP5 does this, pmon does not */
- cp0_config = read_c0_config();
- cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC);
- write_c0_config(cp0_config);
-
if (TX4927_REV_PCODE() == 0x4927) {
rbtx4927_clock_init();
tx4927_setup();
@@ -212,6 +207,14 @@ static void __init rbtx4927_mem_setup(void)
set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET);
#endif
+ /* TX4927-SIO DTR on (PIO[15]) */
+ gpio_request(15, "sio-dtr");
+ gpio_direction_output(15, 1);
+ gpio_request(0, "led");
+ gpio_direction_output(0, 1);
+ gpio_request(1, "led");
+ gpio_direction_output(1, 1);
+
tx4927_sio_init(0, 0);
#ifdef CONFIG_SERIAL_TXX9_CONSOLE
argptr = prom_getcmdline();
@@ -304,11 +307,21 @@ static void __init rbtx4927_ne_init(void)
platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res));
}
+static void __init rbtx4927_mtd_init(void)
+{
+ int i;
+
+ for (i = 0; i < 2; i++)
+ tx4927_mtd_init(i);
+}
+
static void __init rbtx4927_device_init(void)
{
toshiba_rbtx4927_rtc_init();
rbtx4927_ne_init();
tx4927_wdt_init();
+ rbtx4927_mtd_init();
+ txx9_iocled_init(RBTX4927_LED_ADDR - IO_BASE, -1, 3, 1, "green", NULL);
}
struct txx9_board_vec rbtx4927_vec __initdata = {
diff --git a/arch/mips/txx9/rbtx4938/Makefile b/arch/mips/txx9/rbtx4938/Makefile
index 9dcc52ae5b9..f3e1f597b4f 100644
--- a/arch/mips/txx9/rbtx4938/Makefile
+++ b/arch/mips/txx9/rbtx4938/Makefile
@@ -1,3 +1,3 @@
-obj-y += prom.o setup.o irq.o spi_eeprom.o
+obj-y += prom.o setup.o irq.o
EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/txx9/rbtx4938/irq.c b/arch/mips/txx9/rbtx4938/irq.c
index ca2f8306ce9..7d21befb893 100644
--- a/arch/mips/txx9/rbtx4938/irq.c
+++ b/arch/mips/txx9/rbtx4938/irq.c
@@ -85,10 +85,10 @@ static int toshiba_rbtx4938_irq_nested(int sw_irq)
u8 level3;
level3 = readb(rbtx4938_imstat_addr);
- if (level3)
- /* must use fls so onboard ATA has priority */
- sw_irq = RBTX4938_IRQ_IOC + fls(level3) - 1;
- return sw_irq;
+ if (unlikely(!level3))
+ return -1;
+ /* must use fls so onboard ATA has priority */
+ return RBTX4938_IRQ_IOC + __fls8(level3);
}
static void __init
diff --git a/arch/mips/txx9/rbtx4938/prom.c b/arch/mips/txx9/rbtx4938/prom.c
index d73123cd2ab..bcb469247e8 100644
--- a/arch/mips/txx9/rbtx4938/prom.c
+++ b/arch/mips/txx9/rbtx4938/prom.c
@@ -18,9 +18,6 @@
void __init rbtx4938_prom_init(void)
{
-#ifndef CONFIG_TX4938_NAND_BOOT
- prom_init_cmdline();
-#endif
add_memory_region(0, tx4938_get_mem_size(), BOOT_MEM_RAM);
txx9_sio_putchar_init(TX4938_SIO_REG(0) & 0xfffffffffULL);
}
diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c
index 9ab48dec0fe..547ff2920bf 100644
--- a/arch/mips/txx9/rbtx4938/setup.c
+++ b/arch/mips/txx9/rbtx4938/setup.c
@@ -15,6 +15,7 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/mtd/physmap.h>
#include <asm/reboot.h>
#include <asm/io.h>
@@ -110,6 +111,7 @@ static void __init rbtx4938_pci_setup(void)
#define SEEPROM2_CS 0 /* IOC */
#define SEEPROM3_CS 1 /* IOC */
#define SRTC_CS 2 /* IOC */
+#define SPI_BUSNO 0
static int __init rbtx4938_ethaddr_init(void)
{
@@ -119,7 +121,7 @@ static int __init rbtx4938_ethaddr_init(void)
int i;
/* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */
- if (spi_eeprom_read(SEEPROM1_CS, 0, dat, sizeof(dat))) {
+ if (spi_eeprom_read(SPI_BUSNO, SEEPROM1_CS, 0, dat, sizeof(dat))) {
printk(KERN_ERR "seeprom: read error.\n");
return -ENODEV;
} else {
@@ -173,23 +175,30 @@ static void __init rbtx4938_mem_setup(void)
#endif
#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
- printk(KERN_INFO "PIOSEL: disabling both ata and nand selection\n");
+ pr_info("PIOSEL: disabling both ATA and NAND selection\n");
txx9_clear64(&tx4938_ccfgptr->pcfg,
TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL);
#endif
#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND
- printk(KERN_INFO "PIOSEL: enabling nand selection\n");
+ pr_info("PIOSEL: enabling NAND selection\n");
txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
#endif
#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA
- printk(KERN_INFO "PIOSEL: enabling ata selection\n");
+ pr_info("PIOSEL: enabling ATA selection\n");
txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
#endif
+#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_KEEP
+ pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg);
+ pr_info("PIOSEL: NAND %s, ATA %s\n",
+ (pcfg & TX4938_PCFG_NDF_SEL) ? "enabled" : "disabled",
+ (pcfg & TX4938_PCFG_ATA_SEL) ? "enabled" : "disabled");
+#endif
+
rbtx4938_spi_setup();
pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg); /* updated */
/* fixup piosel */
@@ -279,9 +288,9 @@ static int __init rbtx4938_spi_init(void)
.mode = SPI_MODE_1 | SPI_CS_HIGH,
};
spi_register_board_info(&srtc_info, 1);
- spi_eeprom_register(SEEPROM1_CS);
- spi_eeprom_register(16 + SEEPROM2_CS);
- spi_eeprom_register(16 + SEEPROM3_CS);
+ spi_eeprom_register(SPI_BUSNO, SEEPROM1_CS, 128);
+ spi_eeprom_register(SPI_BUSNO, 16 + SEEPROM2_CS, 128);
+ spi_eeprom_register(SPI_BUSNO, 16 + SEEPROM3_CS, 128);
gpio_request(16 + SRTC_CS, "rtc-rs5c348");
gpio_direction_output(16 + SRTC_CS, 0);
gpio_request(SEEPROM1_CS, "seeprom1");
@@ -290,10 +299,46 @@ static int __init rbtx4938_spi_init(void)
gpio_direction_output(16 + SEEPROM2_CS, 1);
gpio_request(16 + SEEPROM3_CS, "seeprom3");
gpio_direction_output(16 + SEEPROM3_CS, 1);
- tx4938_spi_init(0);
+ tx4938_spi_init(SPI_BUSNO);
return 0;
}
+static void __init rbtx4938_mtd_init(void)
+{
+ struct physmap_flash_data pdata = {
+ .width = 4,
+ };
+
+ switch (readb(rbtx4938_bdipsw_addr) & 7) {
+ case 0:
+ /* Boot */
+ txx9_physmap_flash_init(0, 0x1fc00000, 0x400000, &pdata);
+ /* System */
+ txx9_physmap_flash_init(1, 0x1e000000, 0x1000000, &pdata);
+ break;
+ case 1:
+ /* System */
+ txx9_physmap_flash_init(0, 0x1f000000, 0x1000000, &pdata);
+ /* Boot */
+ txx9_physmap_flash_init(1, 0x1ec00000, 0x400000, &pdata);
+ break;
+ case 2:
+ /* Ext */
+ txx9_physmap_flash_init(0, 0x1f000000, 0x1000000, &pdata);
+ /* System */
+ txx9_physmap_flash_init(1, 0x1e000000, 0x1000000, &pdata);
+ /* Boot */
+ txx9_physmap_flash_init(2, 0x1dc00000, 0x400000, &pdata);
+ break;
+ case 3:
+ /* Boot */
+ txx9_physmap_flash_init(1, 0x1bc00000, 0x400000, &pdata);
+ /* System */
+ txx9_physmap_flash_init(2, 0x1a000000, 0x1000000, &pdata);
+ break;
+ }
+}
+
static void __init rbtx4938_arch_init(void)
{
gpiochip_add(&rbtx4938_spi_gpio_chip);
@@ -306,6 +351,9 @@ static void __init rbtx4938_device_init(void)
rbtx4938_ethaddr_init();
rbtx4938_ne_init();
tx4938_wdt_init();
+ rbtx4938_mtd_init();
+ tx4938_ata_init(RBTX4938_IRQ_IOC_ATA, 0, 1);
+ txx9_iocled_init(RBTX4938_LED_ADDR - IO_BASE, -1, 8, 1, "green", NULL);
}
struct txx9_board_vec rbtx4938_vec __initdata = {
diff --git a/arch/mips/txx9/rbtx4939/Makefile b/arch/mips/txx9/rbtx4939/Makefile
new file mode 100644
index 00000000000..3232cd03a7d
--- /dev/null
+++ b/arch/mips/txx9/rbtx4939/Makefile
@@ -0,0 +1,3 @@
+obj-y += irq.o setup.o prom.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/txx9/rbtx4939/irq.c b/arch/mips/txx9/rbtx4939/irq.c
new file mode 100644
index 00000000000..500cc0a908e
--- /dev/null
+++ b/arch/mips/txx9/rbtx4939/irq.c
@@ -0,0 +1,96 @@
+/*
+ * Toshiba RBTX4939 interrupt routines
+ * Based on linux/arch/mips/txx9/rbtx4938/irq.c,
+ * and RBTX49xx patch from CELF patch archive.
+ *
+ * Copyright (C) 2000-2001,2005-2006 Toshiba Corporation
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/mipsregs.h>
+#include <asm/txx9/rbtx4939.h>
+
+/*
+ * RBTX4939 IOC controller definition
+ */
+
+static void rbtx4939_ioc_irq_unmask(unsigned int irq)
+{
+ int ioc_nr = irq - RBTX4939_IRQ_IOC;
+
+ writeb(readb(rbtx4939_ien_addr) | (1 << ioc_nr), rbtx4939_ien_addr);
+}
+
+static void rbtx4939_ioc_irq_mask(unsigned int irq)
+{
+ int ioc_nr = irq - RBTX4939_IRQ_IOC;
+
+ writeb(readb(rbtx4939_ien_addr) & ~(1 << ioc_nr), rbtx4939_ien_addr);
+ mmiowb();
+}
+
+static struct irq_chip rbtx4939_ioc_irq_chip = {
+ .name = "IOC",
+ .ack = rbtx4939_ioc_irq_mask,
+ .mask = rbtx4939_ioc_irq_mask,
+ .mask_ack = rbtx4939_ioc_irq_mask,
+ .unmask = rbtx4939_ioc_irq_unmask,
+};
+
+
+static inline int rbtx4939_ioc_irqroute(void)
+{
+ unsigned char istat = readb(rbtx4939_ifac2_addr);
+
+ if (unlikely(istat == 0))
+ return -1;
+ return RBTX4939_IRQ_IOC + __fls8(istat);
+}
+
+static int rbtx4939_irq_dispatch(int pending)
+{
+ int irq;
+
+ if (pending & CAUSEF_IP7)
+ return MIPS_CPU_IRQ_BASE + 7;
+ irq = tx4939_irq();
+ if (likely(irq >= 0)) {
+ /* redirect IOC interrupts */
+ switch (irq) {
+ case RBTX4939_IRQ_IOCINT:
+ irq = rbtx4939_ioc_irqroute();
+ break;
+ }
+ } else if (pending & CAUSEF_IP0)
+ irq = MIPS_CPU_IRQ_BASE + 0;
+ else if (pending & CAUSEF_IP1)
+ irq = MIPS_CPU_IRQ_BASE + 1;
+ else
+ irq = -1;
+ return irq;
+}
+
+void __init rbtx4939_irq_setup(void)
+{
+ int i;
+
+ /* mask all IOC interrupts */
+ writeb(0, rbtx4939_ien_addr);
+
+ /* clear SoftInt interrupts */
+ writeb(0, rbtx4939_softint_addr);
+
+ txx9_irq_dispatch = rbtx4939_irq_dispatch;
+
+ tx4939_irq_init();
+ for (i = RBTX4939_IRQ_IOC;
+ i < RBTX4939_IRQ_IOC + RBTX4939_NR_IRQ_IOC; i++)
+ set_irq_chip_and_handler(i, &rbtx4939_ioc_irq_chip,
+ handle_level_irq);
+
+ set_irq_chained_handler(RBTX4939_IRQ_IOCINT, handle_simple_irq);
+}
diff --git a/arch/mips/txx9/rbtx4939/prom.c b/arch/mips/txx9/rbtx4939/prom.c
new file mode 100644
index 00000000000..bd277ecb4ad
--- /dev/null
+++ b/arch/mips/txx9/rbtx4939/prom.c
@@ -0,0 +1,17 @@
+/*
+ * rbtx4939 specific prom routines
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/rbtx4939.h>
+
+void __init rbtx4939_prom_init(void)
+{
+ tx4939_add_memory_regions();
+ txx9_sio_putchar_init(TX4939_SIO_REG(0) & 0xfffffffffULL);
+}
diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c
new file mode 100644
index 00000000000..9855d7bccc2
--- /dev/null
+++ b/arch/mips/txx9/rbtx4939/setup.c
@@ -0,0 +1,307 @@
+/*
+ * Toshiba RBTX4939 setup routines.
+ * Based on linux/arch/mips/txx9/rbtx4938/setup.c,
+ * and RBTX49xx patch from CELF patch archive.
+ *
+ * Copyright (C) 2000-2001,2005-2007 Toshiba Corporation
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <asm/reboot.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/pci.h>
+#include <asm/txx9/rbtx4939.h>
+
+static void rbtx4939_machine_restart(char *command)
+{
+ local_irq_disable();
+ writeb(1, rbtx4939_reseten_addr);
+ writeb(1, rbtx4939_softreset_addr);
+ while (1)
+ ;
+}
+
+static void __init rbtx4939_time_init(void)
+{
+ tx4939_time_init(0);
+}
+
+static void __init rbtx4939_pci_setup(void)
+{
+#ifdef CONFIG_PCI
+ int extarb = !(__raw_readq(&tx4939_ccfgptr->ccfg) & TX4939_CCFG_PCIARB);
+ struct pci_controller *c = &txx9_primary_pcic;
+
+ register_pci_controller(c);
+
+ tx4939_report_pciclk();
+ tx4927_pcic_setup(tx4939_pcicptr, c, extarb);
+ if (!(__raw_readq(&tx4939_ccfgptr->pcfg) & TX4939_PCFG_ATA1MODE) &&
+ (__raw_readq(&tx4939_ccfgptr->pcfg) &
+ (TX4939_PCFG_ET0MODE | TX4939_PCFG_ET1MODE))) {
+ tx4939_report_pci1clk();
+
+ /* mem:64K(max), io:64K(max) (enough for ETH0,ETH1) */
+ c = txx9_alloc_pci_controller(NULL, 0, 0x10000, 0, 0x10000);
+ register_pci_controller(c);
+ tx4927_pcic_setup(tx4939_pcic1ptr, c, 0);
+ }
+
+ tx4939_setup_pcierr_irq();
+#endif /* CONFIG_PCI */
+}
+
+static unsigned long long default_ebccr[] __initdata = {
+ 0x01c0000000007608ULL, /* 64M ROM */
+ 0x017f000000007049ULL, /* 1M IOC */
+ 0x0180000000408608ULL, /* ISA */
+ 0,
+};
+
+static void __init rbtx4939_ebusc_setup(void)
+{
+ int i;
+ unsigned int sp;
+
+ /* use user-configured speed */
+ sp = TX4939_EBUSC_CR(0) & 0x30;
+ default_ebccr[0] |= sp;
+ default_ebccr[1] |= sp;
+ default_ebccr[2] |= sp;
+ /* initialise by myself */
+ for (i = 0; i < ARRAY_SIZE(default_ebccr); i++) {
+ if (default_ebccr[i])
+ ____raw_writeq(default_ebccr[i],
+ &tx4939_ebuscptr->cr[i]);
+ else
+ ____raw_writeq(____raw_readq(&tx4939_ebuscptr->cr[i])
+ & ~8,
+ &tx4939_ebuscptr->cr[i]);
+ }
+}
+
+static void __init rbtx4939_update_ioc_pen(void)
+{
+ __u64 pcfg = ____raw_readq(&tx4939_ccfgptr->pcfg);
+ __u64 ccfg = ____raw_readq(&tx4939_ccfgptr->ccfg);
+ __u8 pe1 = readb(rbtx4939_pe1_addr);
+ __u8 pe2 = readb(rbtx4939_pe2_addr);
+ __u8 pe3 = readb(rbtx4939_pe3_addr);
+ if (pcfg & TX4939_PCFG_ATA0MODE)
+ pe1 |= RBTX4939_PE1_ATA(0);
+ else
+ pe1 &= ~RBTX4939_PE1_ATA(0);
+ if (pcfg & TX4939_PCFG_ATA1MODE) {
+ pe1 |= RBTX4939_PE1_ATA(1);
+ pe1 &= ~(RBTX4939_PE1_RMII(0) | RBTX4939_PE1_RMII(1));
+ } else {
+ pe1 &= ~RBTX4939_PE1_ATA(1);
+ if (pcfg & TX4939_PCFG_ET0MODE)
+ pe1 |= RBTX4939_PE1_RMII(0);
+ else
+ pe1 &= ~RBTX4939_PE1_RMII(0);
+ if (pcfg & TX4939_PCFG_ET1MODE)
+ pe1 |= RBTX4939_PE1_RMII(1);
+ else
+ pe1 &= ~RBTX4939_PE1_RMII(1);
+ }
+ if (ccfg & TX4939_CCFG_PTSEL)
+ pe3 &= ~(RBTX4939_PE3_VP | RBTX4939_PE3_VP_P |
+ RBTX4939_PE3_VP_S);
+ else {
+ __u64 vmode = pcfg &
+ (TX4939_PCFG_VSSMODE | TX4939_PCFG_VPSMODE);
+ if (vmode == 0)
+ pe3 &= ~(RBTX4939_PE3_VP | RBTX4939_PE3_VP_P |
+ RBTX4939_PE3_VP_S);
+ else if (vmode == TX4939_PCFG_VPSMODE) {
+ pe3 |= RBTX4939_PE3_VP_P;
+ pe3 &= ~(RBTX4939_PE3_VP | RBTX4939_PE3_VP_S);
+ } else if (vmode == TX4939_PCFG_VSSMODE) {
+ pe3 |= RBTX4939_PE3_VP | RBTX4939_PE3_VP_S;
+ pe3 &= ~RBTX4939_PE3_VP_P;
+ } else {
+ pe3 |= RBTX4939_PE3_VP | RBTX4939_PE3_VP_P;
+ pe3 &= ~RBTX4939_PE3_VP_S;
+ }
+ }
+ if (pcfg & TX4939_PCFG_SPIMODE) {
+ if (pcfg & TX4939_PCFG_SIO2MODE_GPIO)
+ pe2 &= ~(RBTX4939_PE2_SIO2 | RBTX4939_PE2_SIO0);
+ else {
+ if (pcfg & TX4939_PCFG_SIO2MODE_SIO2) {
+ pe2 |= RBTX4939_PE2_SIO2;
+ pe2 &= ~RBTX4939_PE2_SIO0;
+ } else {
+ pe2 |= RBTX4939_PE2_SIO0;
+ pe2 &= ~RBTX4939_PE2_SIO2;
+ }
+ }
+ if (pcfg & TX4939_PCFG_SIO3MODE)
+ pe2 |= RBTX4939_PE2_SIO3;
+ else
+ pe2 &= ~RBTX4939_PE2_SIO3;
+ pe2 &= ~RBTX4939_PE2_SPI;
+ } else {
+ pe2 |= RBTX4939_PE2_SPI;
+ pe2 &= ~(RBTX4939_PE2_SIO3 | RBTX4939_PE2_SIO2 |
+ RBTX4939_PE2_SIO0);
+ }
+ if ((pcfg & TX4939_PCFG_I2SMODE_MASK) == TX4939_PCFG_I2SMODE_GPIO)
+ pe2 |= RBTX4939_PE2_GPIO;
+ else
+ pe2 &= ~RBTX4939_PE2_GPIO;
+ writeb(pe1, rbtx4939_pe1_addr);
+ writeb(pe2, rbtx4939_pe2_addr);
+ writeb(pe3, rbtx4939_pe3_addr);
+}
+
+#define RBTX4939_MAX_7SEGLEDS 8
+
+#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
+static u8 led_val[RBTX4939_MAX_7SEGLEDS];
+struct rbtx4939_led_data {
+ struct led_classdev cdev;
+ char name[32];
+ unsigned int num;
+};
+
+/* Use "dot" in 7seg LEDs */
+static void rbtx4939_led_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct rbtx4939_led_data *led_dat =
+ container_of(led_cdev, struct rbtx4939_led_data, cdev);
+ unsigned int num = led_dat->num;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ led_val[num] = (led_val[num] & 0x7f) | (value ? 0x80 : 0);
+ writeb(led_val[num], rbtx4939_7seg_addr(num / 4, num % 4));
+ local_irq_restore(flags);
+}
+
+static int __init rbtx4939_led_probe(struct platform_device *pdev)
+{
+ struct rbtx4939_led_data *leds_data;
+ int i;
+ static char *default_triggers[] __initdata = {
+ "heartbeat",
+ "ide-disk",
+ "nand-disk",
+ };
+
+ leds_data = kzalloc(sizeof(*leds_data) * RBTX4939_MAX_7SEGLEDS,
+ GFP_KERNEL);
+ if (!leds_data)
+ return -ENOMEM;
+ for (i = 0; i < RBTX4939_MAX_7SEGLEDS; i++) {
+ int rc;
+ struct rbtx4939_led_data *led_dat = &leds_data[i];
+
+ led_dat->num = i;
+ led_dat->cdev.brightness_set = rbtx4939_led_brightness_set;
+ sprintf(led_dat->name, "rbtx4939:amber:%u", i);
+ led_dat->cdev.name = led_dat->name;
+ if (i < ARRAY_SIZE(default_triggers))
+ led_dat->cdev.default_trigger = default_triggers[i];
+ rc = led_classdev_register(&pdev->dev, &led_dat->cdev);
+ if (rc < 0)
+ return rc;
+ led_dat->cdev.brightness_set(&led_dat->cdev, 0);
+ }
+ return 0;
+
+}
+
+static struct platform_driver rbtx4939_led_driver = {
+ .driver = {
+ .name = "rbtx4939-led",
+ .owner = THIS_MODULE,
+ },
+};
+
+static void __init rbtx4939_led_setup(void)
+{
+ platform_device_register_simple("rbtx4939-led", -1, NULL, 0);
+ platform_driver_probe(&rbtx4939_led_driver, rbtx4939_led_probe);
+}
+#else
+static inline void rbtx4939_led_setup(void)
+{
+}
+#endif
+
+static void __init rbtx4939_arch_init(void)
+{
+ rbtx4939_pci_setup();
+}
+
+static void __init rbtx4939_device_init(void)
+{
+#if defined(CONFIG_TC35815) || defined(CONFIG_TC35815_MODULE)
+ int i, j;
+ unsigned char ethaddr[2][6];
+ for (i = 0; i < 2; i++) {
+ unsigned long area = CKSEG1 + 0x1fff0000 + (i * 0x10);
+ if (readb(rbtx4939_bdipsw_addr) & 8) {
+ u16 buf[3];
+ area -= 0x03000000;
+ for (j = 0; j < 3; j++)
+ buf[j] = le16_to_cpup((u16 *)(area + j * 2));
+ memcpy(ethaddr[i], buf, 6);
+ } else
+ memcpy(ethaddr[i], (void *)area, 6);
+ }
+ tx4939_ethaddr_init(ethaddr[0], ethaddr[1]);
+#endif
+ rbtx4939_led_setup();
+ tx4939_wdt_init();
+ tx4939_ata_init();
+}
+
+static void __init rbtx4939_setup(void)
+{
+ rbtx4939_ebusc_setup();
+ /* always enable ATA0 */
+ txx9_set64(&tx4939_ccfgptr->pcfg, TX4939_PCFG_ATA0MODE);
+ rbtx4939_update_ioc_pen();
+ if (txx9_master_clock == 0)
+ txx9_master_clock = 20000000;
+ tx4939_setup();
+
+ _machine_restart = rbtx4939_machine_restart;
+
+ pr_info("RBTX4939 (Rev %02x) --- FPGA(Rev %02x) DIPSW:%02x,%02x\n",
+ readb(rbtx4939_board_rev_addr), readb(rbtx4939_ioc_rev_addr),
+ readb(rbtx4939_udipsw_addr), readb(rbtx4939_bdipsw_addr));
+
+#ifdef CONFIG_PCI
+ txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0);
+ txx9_board_pcibios_setup = tx4927_pcibios_setup;
+#else
+ set_io_port_base(RBTX4939_ETHER_BASE);
+#endif
+
+ tx4939_sio_init(TX4939_SCLK0(txx9_master_clock), 0);
+}
+
+struct txx9_board_vec rbtx4939_vec __initdata = {
+ .system = "Tothiba RBTX4939",
+ .prom_init = rbtx4939_prom_init,
+ .mem_setup = rbtx4939_setup,
+ .irq_setup = rbtx4939_irq_setup,
+ .time_init = rbtx4939_time_init,
+ .device_init = rbtx4939_device_init,
+ .arch_init = rbtx4939_arch_init,
+#ifdef CONFIG_PCI
+ .pci_map_irq = tx4939_pci_map_irq,
+#endif
+};