diff options
Diffstat (limited to 'arch/mips/pmc-sierra')
| -rw-r--r-- | arch/mips/pmc-sierra/Kconfig | 5 | ||||
| -rw-r--r-- | arch/mips/pmc-sierra/msp71xx/Makefile | 2 | ||||
| -rw-r--r-- | arch/mips/pmc-sierra/msp71xx/msp_usb.c | 239 |
3 files changed, 182 insertions, 64 deletions
diff --git a/arch/mips/pmc-sierra/Kconfig b/arch/mips/pmc-sierra/Kconfig index 8d798497c61..c437b8a8ab8 100644 --- a/arch/mips/pmc-sierra/Kconfig +++ b/arch/mips/pmc-sierra/Kconfig @@ -23,6 +23,7 @@ config PMC_MSP7120_GW select SYS_SUPPORTS_MULTITHREADING select IRQ_MSP_CIC select HW_HAS_PCI + select MSP_HAS_USB config PMC_MSP7120_FPGA bool "PMC-Sierra MSP7120 FPGA" @@ -35,3 +36,7 @@ endchoice config HYPERTRANSPORT bool "Hypertransport Support for PMC-Sierra Yosemite" depends on PMC_YOSEMITE + +config MSP_HAS_USB + boolean + depends on PMC_MSP diff --git a/arch/mips/pmc-sierra/msp71xx/Makefile b/arch/mips/pmc-sierra/msp71xx/Makefile index a002fa222b2..f26cab349c3 100644 --- a/arch/mips/pmc-sierra/msp71xx/Makefile +++ b/arch/mips/pmc-sierra/msp71xx/Makefile @@ -9,6 +9,6 @@ obj-$(CONFIG_IRQ_MSP_SLP) += msp_irq_slp.o obj-$(CONFIG_IRQ_MSP_CIC) += msp_irq_cic.o msp_irq_per.o obj-$(CONFIG_PCI) += msp_pci.o obj-$(CONFIG_MSPETH) += msp_eth.o -obj-$(CONFIG_USB_MSP71XX) += msp_usb.o +obj-$(CONFIG_MSP_HAS_USB) += msp_usb.o obj-$(CONFIG_MIPS_MT_SMP) += msp_smp.o obj-$(CONFIG_MIPS_MT_SMTC) += msp_smtc.o diff --git a/arch/mips/pmc-sierra/msp71xx/msp_usb.c b/arch/mips/pmc-sierra/msp71xx/msp_usb.c index 0ee01e359dd..9a1aef89bd4 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_usb.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_usb.c @@ -1,7 +1,7 @@ /* * The setup file for USB related hardware on PMC-Sierra MSP processors. * - * Copyright 2006-2007 PMC-Sierra, Inc. + * Copyright 2006 PMC-Sierra, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -23,8 +23,8 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_GADGET) -#include <linux/dma-mapping.h> #include <linux/init.h> #include <linux/ioport.h> #include <linux/platform_device.h> @@ -34,40 +34,56 @@ #include <msp_regs.h> #include <msp_int.h> #include <msp_prom.h> +#include <msp_usb.h> + #if defined(CONFIG_USB_EHCI_HCD) -static struct resource msp_usbhost_resources [] = { - [0] = { - .start = MSP_USB_BASE_START, - .end = MSP_USB_BASE_END, - .flags = IORESOURCE_MEM, +static struct resource msp_usbhost0_resources[] = { + [0] = { /* EHCI-HS operational and capabilities registers */ + .start = MSP_USB0_HS_START, + .end = MSP_USB0_HS_END, + .flags = IORESOURCE_MEM, }, [1] = { - .start = MSP_INT_USB, - .end = MSP_INT_USB, - .flags = IORESOURCE_IRQ, + .start = MSP_INT_USB, + .end = MSP_INT_USB, + .flags = IORESOURCE_IRQ, + }, + [2] = { /* MSBus-to-AMBA bridge register space */ + .start = MSP_USB0_MAB_START, + .end = MSP_USB0_MAB_END, + .flags = IORESOURCE_MEM, + }, + [3] = { /* Identification and general hardware parameters */ + .start = MSP_USB0_ID_START, + .end = MSP_USB0_ID_END, + .flags = IORESOURCE_MEM, }, }; -static u64 msp_usbhost_dma_mask = DMA_BIT_MASK(32); +static u64 msp_usbhost0_dma_mask = 0xffffffffUL; -static struct platform_device msp_usbhost_device = { - .name = "pmcmsp-ehci", - .id = 0, +static struct mspusb_device msp_usbhost0_device = { .dev = { - .dma_mask = &msp_usbhost_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), + .name = "pmcmsp-ehci", + .id = 0, + .dev = { + .dma_mask = &msp_usbhost0_dma_mask, + .coherent_dma_mask = 0xffffffffUL, + }, + .num_resources = ARRAY_SIZE(msp_usbhost0_resources), + .resource = msp_usbhost0_resources, }, - .num_resources = ARRAY_SIZE(msp_usbhost_resources), - .resource = msp_usbhost_resources, }; -#endif /* CONFIG_USB_EHCI_HCD */ -#if defined(CONFIG_USB_GADGET) -static struct resource msp_usbdev_resources [] = { - [0] = { - .start = MSP_USB_BASE, - .end = MSP_USB_BASE_END, +/* MSP7140/MSP82XX has two USB2 hosts. */ +#ifdef CONFIG_MSP_HAS_DUAL_USB +static u64 msp_usbhost1_dma_mask = 0xffffffffUL; + +static struct resource msp_usbhost1_resources[] = { + [0] = { /* EHCI-HS operational and capabilities registers */ + .start = MSP_USB1_HS_START, + .end = MSP_USB1_HS_END, .flags = IORESOURCE_MEM, }, [1] = { @@ -75,76 +91,173 @@ static struct resource msp_usbdev_resources [] = { .end = MSP_INT_USB, .flags = IORESOURCE_IRQ, }, + [2] = { /* MSBus-to-AMBA bridge register space */ + .start = MSP_USB1_MAB_START, + .end = MSP_USB1_MAB_END, + .flags = IORESOURCE_MEM, + }, + [3] = { /* Identification and general hardware parameters */ + .start = MSP_USB1_ID_START, + .end = MSP_USB1_ID_END, + .flags = IORESOURCE_MEM, + }, +}; + +static struct mspusb_device msp_usbhost1_device = { + .dev = { + .name = "pmcmsp-ehci", + .id = 1, + .dev = { + .dma_mask = &msp_usbhost1_dma_mask, + .coherent_dma_mask = 0xffffffffUL, + }, + .num_resources = ARRAY_SIZE(msp_usbhost1_resources), + .resource = msp_usbhost1_resources, + }, }; +#endif /* CONFIG_MSP_HAS_DUAL_USB */ +#endif /* CONFIG_USB_EHCI_HCD */ -static u64 msp_usbdev_dma_mask = DMA_BIT_MASK(32); +#if defined(CONFIG_USB_GADGET) +static struct resource msp_usbdev0_resources[] = { + [0] = { /* EHCI-HS operational and capabilities registers */ + .start = MSP_USB0_HS_START, + .end = MSP_USB0_HS_END, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MSP_INT_USB, + .end = MSP_INT_USB, + .flags = IORESOURCE_IRQ, + }, + [2] = { /* MSBus-to-AMBA bridge register space */ + .start = MSP_USB0_MAB_START, + .end = MSP_USB0_MAB_END, + .flags = IORESOURCE_MEM, + }, + [3] = { /* Identification and general hardware parameters */ + .start = MSP_USB0_ID_START, + .end = MSP_USB0_ID_END, + .flags = IORESOURCE_MEM, + }, +}; -static struct platform_device msp_usbdev_device = { - .name = "msp71xx_udc", - .id = 0, +static u64 msp_usbdev_dma_mask = 0xffffffffUL; + +/* This may need to be converted to a mspusb_device, too. */ +static struct mspusb_device msp_usbdev0_device = { .dev = { - .dma_mask = &msp_usbdev_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), + .name = "msp71xx_udc", + .id = 0, + .dev = { + .dma_mask = &msp_usbdev_dma_mask, + .coherent_dma_mask = 0xffffffffUL, + }, + .num_resources = ARRAY_SIZE(msp_usbdev0_resources), + .resource = msp_usbdev0_resources, }, - .num_resources = ARRAY_SIZE(msp_usbdev_resources), - .resource = msp_usbdev_resources, }; -#endif /* CONFIG_USB_GADGET */ -#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_GADGET) -static struct platform_device *msp_devs[1]; -#endif +#ifdef CONFIG_MSP_HAS_DUAL_USB +static struct resource msp_usbdev1_resources[] = { + [0] = { /* EHCI-HS operational and capabilities registers */ + .start = MSP_USB1_HS_START, + .end = MSP_USB1_HS_END, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MSP_INT_USB, + .end = MSP_INT_USB, + .flags = IORESOURCE_IRQ, + }, + [2] = { /* MSBus-to-AMBA bridge register space */ + .start = MSP_USB1_MAB_START, + .end = MSP_USB1_MAB_END, + .flags = IORESOURCE_MEM, + }, + [3] = { /* Identification and general hardware parameters */ + .start = MSP_USB1_ID_START, + .end = MSP_USB1_ID_END, + .flags = IORESOURCE_MEM, + }, +}; +/* This may need to be converted to a mspusb_device, too. */ +static struct mspusb_device msp_usbdev1_device = { + .dev = { + .name = "msp71xx_udc", + .id = 0, + .dev = { + .dma_mask = &msp_usbdev_dma_mask, + .coherent_dma_mask = 0xffffffffUL, + }, + .num_resources = ARRAY_SIZE(msp_usbdev1_resources), + .resource = msp_usbdev1_resources, + }, +}; + +#endif /* CONFIG_MSP_HAS_DUAL_USB */ +#endif /* CONFIG_USB_GADGET */ static int __init msp_usb_setup(void) { -#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_GADGET) - char *strp; - char envstr[32]; - unsigned int val = 0; - int result = 0; + char *strp; + char envstr[32]; + struct platform_device *msp_devs[NUM_USB_DEVS]; + unsigned int val; + /* construct environment name usbmode */ + /* set usbmode <host/device> as pmon environment var */ /* - * construct environment name usbmode - * set usbmode <host/device> as pmon environment var + * Could this perhaps be integrated into the "features" env var? + * Use the features key "U", and follow with "H" for host-mode, + * "D" for device-mode. If it works for Ethernet, why not USB... + * -- hammtrev, 2007/03/22 */ snprintf((char *)&envstr[0], sizeof(envstr), "usbmode"); -#if defined(CONFIG_USB_EHCI_HCD) - /* default to host mode */ + /* set default host mode */ val = 1; -#endif /* get environment string */ strp = prom_getenv((char *)&envstr[0]); if (strp) { + /* compare string */ if (!strcmp(strp, "device")) val = 0; } if (val) { #if defined(CONFIG_USB_EHCI_HCD) - /* get host mode device */ - msp_devs[0] = &msp_usbhost_device; - ppfinit("platform add USB HOST done %s.\n", - msp_devs[0]->name); - - result = platform_add_devices(msp_devs, ARRAY_SIZE(msp_devs)); -#endif /* CONFIG_USB_EHCI_HCD */ - } + msp_devs[0] = &msp_usbhost0_device.dev; + ppfinit("platform add USB HOST done %s.\n", msp_devs[0]->name); +#ifdef CONFIG_MSP_HAS_DUAL_USB + msp_devs[1] = &msp_usbhost1_device.dev; + ppfinit("platform add USB HOST done %s.\n", msp_devs[1]->name); +#endif +#else + ppfinit("%s: echi_hcd not supported\n", __FILE__); +#endif /* CONFIG_USB_EHCI_HCD */ + } else { #if defined(CONFIG_USB_GADGET) - else { /* get device mode structure */ - msp_devs[0] = &msp_usbdev_device; - ppfinit("platform add USB DEVICE done %s.\n", - msp_devs[0]->name); - - result = platform_add_devices(msp_devs, ARRAY_SIZE(msp_devs)); + msp_devs[0] = &msp_usbdev0_device.dev; + ppfinit("platform add USB DEVICE done %s.\n" + , msp_devs[0]->name); +#ifdef CONFIG_MSP_HAS_DUAL_USB + msp_devs[1] = &msp_usbdev1_device.dev; + ppfinit("platform add USB DEVICE done %s.\n" + , msp_devs[1]->name); +#endif +#else + ppfinit("%s: usb_gadget not supported\n", __FILE__); +#endif /* CONFIG_USB_GADGET */ } -#endif /* CONFIG_USB_GADGET */ -#endif /* CONFIG_USB_EHCI_HCD || CONFIG_USB_GADGET */ + /* add device */ + platform_add_devices(msp_devs, ARRAY_SIZE(msp_devs)); - return result; + return 0; } subsys_initcall(msp_usb_setup); +#endif /* CONFIG_USB_EHCI_HCD || CONFIG_USB_GADGET */ |