diff options
Diffstat (limited to 'arch/mips/pci/pci-xlr.c')
| -rw-r--r-- | arch/mips/pci/pci-xlr.c | 226 |
1 files changed, 190 insertions, 36 deletions
diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c index 38fece16c43..0dde80332d3 100644 --- a/arch/mips/pci/pci-xlr.c +++ b/arch/mips/pci/pci-xlr.c @@ -36,19 +36,27 @@ #include <linux/pci.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/msi.h> #include <linux/mm.h> +#include <linux/irq.h> +#include <linux/irqdesc.h> #include <linux/console.h> +#include <linux/pci_regs.h> #include <asm/io.h> #include <asm/netlogic/interrupt.h> +#include <asm/netlogic/haldefs.h> +#include <asm/netlogic/common.h> + +#include <asm/netlogic/xlr/msidef.h> #include <asm/netlogic/xlr/iomap.h> #include <asm/netlogic/xlr/pic.h> #include <asm/netlogic/xlr/xlr.h> static void *pci_config_base; -#define pci_cfg_addr(bus, devfn, off) (((bus) << 16) | ((devfn) << 8) | (off)) +#define pci_cfg_addr(bus, devfn, off) (((bus) << 16) | ((devfn) << 8) | (off)) /* PCI ops */ static inline u32 pci_cfg_read_32bit(struct pci_bus *bus, unsigned int devfn, @@ -128,60 +136,190 @@ struct pci_ops nlm_pci_ops = { }; static struct resource nlm_pci_mem_resource = { - .name = "XLR PCI MEM", - .start = 0xd0000000UL, /* 256MB PCI mem @ 0xd000_0000 */ - .end = 0xdfffffffUL, - .flags = IORESOURCE_MEM, + .name = "XLR PCI MEM", + .start = 0xd0000000UL, /* 256MB PCI mem @ 0xd000_0000 */ + .end = 0xdfffffffUL, + .flags = IORESOURCE_MEM, }; static struct resource nlm_pci_io_resource = { - .name = "XLR IO MEM", - .start = 0x10000000UL, /* 16MB PCI IO @ 0x1000_0000 */ - .end = 0x100fffffUL, - .flags = IORESOURCE_IO, + .name = "XLR IO MEM", + .start = 0x10000000UL, /* 16MB PCI IO @ 0x1000_0000 */ + .end = 0x100fffffUL, + .flags = IORESOURCE_IO, }; struct pci_controller nlm_pci_controller = { - .index = 0, - .pci_ops = &nlm_pci_ops, - .mem_resource = &nlm_pci_mem_resource, - .mem_offset = 0x00000000UL, - .io_resource = &nlm_pci_io_resource, - .io_offset = 0x00000000UL, + .index = 0, + .pci_ops = &nlm_pci_ops, + .mem_resource = &nlm_pci_mem_resource, + .mem_offset = 0x00000000UL, + .io_resource = &nlm_pci_io_resource, + .io_offset = 0x00000000UL, }; -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +/* + * The top level PCIe links on the XLS PCIe controller appear as + * bridges. Given a device, this function finds which link it is + * on. + */ +static struct pci_dev *xls_get_pcie_link(const struct pci_dev *dev) { - if (!nlm_chip_is_xls()) - return PIC_PCIX_IRQ; /* for XLR just one IRQ*/ + struct pci_bus *bus, *p; - /* - * For XLS PCIe, there is an IRQ per Link, find out which - * link the device is on to assign interrupts - */ - if (dev->bus->self == NULL) - return 0; + /* Find the bridge on bus 0 */ + bus = dev->bus; + for (p = bus->parent; p && p->number != 0; p = p->parent) + bus = p; - switch (dev->bus->self->devfn) { - case 0x0: + return p ? bus->self : NULL; +} + +static int nlm_pci_link_to_irq(int link) +{ + switch (link) { + case 0: return PIC_PCIE_LINK0_IRQ; - case 0x8: + case 1: return PIC_PCIE_LINK1_IRQ; - case 0x10: + case 2: if (nlm_chip_is_xls_b()) return PIC_PCIE_XLSB0_LINK2_IRQ; else return PIC_PCIE_LINK2_IRQ; - case 0x18: + case 3: if (nlm_chip_is_xls_b()) return PIC_PCIE_XLSB0_LINK3_IRQ; else return PIC_PCIE_LINK3_IRQ; } - WARN(1, "Unexpected devfn %d\n", dev->bus->self->devfn); + WARN(1, "Unexpected link %d\n", link); return 0; } +static int get_irq_vector(const struct pci_dev *dev) +{ + struct pci_dev *lnk; + int link; + + if (!nlm_chip_is_xls()) + return PIC_PCIX_IRQ; /* for XLR just one IRQ */ + + lnk = xls_get_pcie_link(dev); + if (lnk == NULL) + return 0; + + link = PCI_SLOT(lnk->devfn); + return nlm_pci_link_to_irq(link); +} + +#ifdef CONFIG_PCI_MSI +void arch_teardown_msi_irq(unsigned int irq) +{ +} + +int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) +{ + struct msi_msg msg; + struct pci_dev *lnk; + int irq, ret; + u16 val; + + /* MSI not supported on XLR */ + if (!nlm_chip_is_xls()) + return 1; + + /* + * Enable MSI on the XLS PCIe controller bridge which was disabled + * at enumeration, the bridge MSI capability is at 0x50 + */ + lnk = xls_get_pcie_link(dev); + if (lnk == NULL) + return 1; + + pci_read_config_word(lnk, 0x50 + PCI_MSI_FLAGS, &val); + if ((val & PCI_MSI_FLAGS_ENABLE) == 0) { + val |= PCI_MSI_FLAGS_ENABLE; + pci_write_config_word(lnk, 0x50 + PCI_MSI_FLAGS, val); + } + + irq = get_irq_vector(dev); + if (irq <= 0) + return 1; + + msg.address_hi = MSI_ADDR_BASE_HI; + msg.address_lo = MSI_ADDR_BASE_LO | + MSI_ADDR_DEST_MODE_PHYSICAL | + MSI_ADDR_REDIRECTION_CPU; + + msg.data = MSI_DATA_TRIGGER_EDGE | + MSI_DATA_LEVEL_ASSERT | + MSI_DATA_DELIVERY_FIXED; + + ret = irq_set_msi_desc(irq, desc); + if (ret < 0) + return ret; + + write_msi_msg(irq, &msg); + return 0; +} +#endif + +/* Extra ACK needed for XLR on chip PCI controller */ +static void xlr_pci_ack(struct irq_data *d) +{ + uint64_t pcibase = nlm_mmio_base(NETLOGIC_IO_PCIX_OFFSET); + + nlm_read_reg(pcibase, (0x140 >> 2)); +} + +/* Extra ACK needed for XLS on chip PCIe controller */ +static void xls_pcie_ack(struct irq_data *d) +{ + uint64_t pciebase_le = nlm_mmio_base(NETLOGIC_IO_PCIE_1_OFFSET); + + switch (d->irq) { + case PIC_PCIE_LINK0_IRQ: + nlm_write_reg(pciebase_le, (0x90 >> 2), 0xffffffff); + break; + case PIC_PCIE_LINK1_IRQ: + nlm_write_reg(pciebase_le, (0x94 >> 2), 0xffffffff); + break; + case PIC_PCIE_LINK2_IRQ: + nlm_write_reg(pciebase_le, (0x190 >> 2), 0xffffffff); + break; + case PIC_PCIE_LINK3_IRQ: + nlm_write_reg(pciebase_le, (0x194 >> 2), 0xffffffff); + break; + } +} + +/* For XLS B silicon, the 3,4 PCI interrupts are different */ +static void xls_pcie_ack_b(struct irq_data *d) +{ + uint64_t pciebase_le = nlm_mmio_base(NETLOGIC_IO_PCIE_1_OFFSET); + + switch (d->irq) { + case PIC_PCIE_LINK0_IRQ: + nlm_write_reg(pciebase_le, (0x90 >> 2), 0xffffffff); + break; + case PIC_PCIE_LINK1_IRQ: + nlm_write_reg(pciebase_le, (0x94 >> 2), 0xffffffff); + break; + case PIC_PCIE_XLSB0_LINK2_IRQ: + nlm_write_reg(pciebase_le, (0x190 >> 2), 0xffffffff); + break; + case PIC_PCIE_XLSB0_LINK3_IRQ: + nlm_write_reg(pciebase_le, (0x194 >> 2), 0xffffffff); + break; + } +} + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + return get_irq_vector(dev); +} + /* Do platform specific device initialization at pci_enable_device() time */ int pcibios_plat_dev_init(struct pci_dev *dev) { @@ -190,12 +328,15 @@ int pcibios_plat_dev_init(struct pci_dev *dev) static int __init pcibios_init(void) { + void (*extra_ack)(struct irq_data *); + int link, irq; + /* PSB assigns PCI resources */ - pci_probe_only = 1; + pci_set_flags(PCI_PROBE_ONLY); pci_config_base = ioremap(DEFAULT_PCI_CONFIG_BASE, 16 << 20); /* Extend IO port for memory mapped io */ - ioport_resource.start = 0; + ioport_resource.start = 0; ioport_resource.end = ~0; set_io_port_base(CKSEG1); @@ -204,11 +345,24 @@ static int __init pcibios_init(void) pr_info("Registering XLR/XLS PCIX/PCIE Controller.\n"); register_pci_controller(&nlm_pci_controller); + /* + * For PCI interrupts, we need to ack the PCI controller too, overload + * irq handler data to do this + */ + if (!nlm_chip_is_xls()) { + /* XLR PCI controller ACK */ + nlm_set_pic_extra_ack(0, PIC_PCIX_IRQ, xlr_pci_ack); + } else { + if (nlm_chip_is_xls_b()) + extra_ack = xls_pcie_ack_b; + else + extra_ack = xls_pcie_ack; + for (link = 0; link < 4; link++) { + irq = nlm_pci_link_to_irq(link); + nlm_set_pic_extra_ack(0, irq, extra_ack); + } + } return 0; } arch_initcall(pcibios_init); - -struct pci_fixup pcibios_fixups[] = { - {0} -}; |