diff options
Diffstat (limited to 'arch/mips/netlogic/xlr')
| -rw-r--r-- | arch/mips/netlogic/xlr/Makefile | 7 | ||||
| -rw-r--r-- | arch/mips/netlogic/xlr/fmn-config.c | 293 | ||||
| -rw-r--r-- | arch/mips/netlogic/xlr/fmn.c | 204 | ||||
| -rw-r--r-- | arch/mips/netlogic/xlr/irq.c | 300 | ||||
| -rw-r--r-- | arch/mips/netlogic/xlr/platform-flash.c | 220 | ||||
| -rw-r--r-- | arch/mips/netlogic/xlr/platform.c | 188 | ||||
| -rw-r--r-- | arch/mips/netlogic/xlr/setup.c | 80 | ||||
| -rw-r--r-- | arch/mips/netlogic/xlr/smp.c | 220 | ||||
| -rw-r--r-- | arch/mips/netlogic/xlr/time.c | 51 | ||||
| -rw-r--r-- | arch/mips/netlogic/xlr/wakeup.c (renamed from arch/mips/netlogic/xlr/smpboot.S) | 97 | ||||
| -rw-r--r-- | arch/mips/netlogic/xlr/xlr_console.c | 46 |
11 files changed, 981 insertions, 725 deletions
diff --git a/arch/mips/netlogic/xlr/Makefile b/arch/mips/netlogic/xlr/Makefile index 2dca585dd2f..05902bc6f08 100644 --- a/arch/mips/netlogic/xlr/Makefile +++ b/arch/mips/netlogic/xlr/Makefile @@ -1,5 +1,2 @@ -obj-y += setup.o platform.o irq.o setup.o time.o -obj-$(CONFIG_SMP) += smp.o smpboot.o -obj-$(CONFIG_EARLY_PRINTK) += xlr_console.o - -ccflags-y += -Werror +obj-y += fmn.o fmn-config.o setup.o platform.o platform-flash.o +obj-$(CONFIG_SMP) += wakeup.o diff --git a/arch/mips/netlogic/xlr/fmn-config.c b/arch/mips/netlogic/xlr/fmn-config.c new file mode 100644 index 00000000000..c7622c6e5f6 --- /dev/null +++ b/arch/mips/netlogic/xlr/fmn-config.c @@ -0,0 +1,293 @@ +/* + * Copyright (c) 2003-2012 Broadcom Corporation + * All Rights Reserved + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the Broadcom + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <asm/cpu-info.h> +#include <linux/irq.h> +#include <linux/interrupt.h> + +#include <asm/cpu.h> +#include <asm/mipsregs.h> +#include <asm/netlogic/xlr/fmn.h> +#include <asm/netlogic/xlr/xlr.h> +#include <asm/netlogic/common.h> +#include <asm/netlogic/haldefs.h> + +struct xlr_board_fmn_config xlr_board_fmn_config; + +static void __maybe_unused print_credit_config(struct xlr_fmn_info *fmn_info) +{ + int bkt; + + pr_info("Bucket size :\n"); + pr_info("Station\t: Size\n"); + for (bkt = 0; bkt < 16; bkt++) + pr_info(" %d %d %d %d %d %d %d %d\n", + xlr_board_fmn_config.bucket_size[(bkt * 8) + 0], + xlr_board_fmn_config.bucket_size[(bkt * 8) + 1], + xlr_board_fmn_config.bucket_size[(bkt * 8) + 2], + xlr_board_fmn_config.bucket_size[(bkt * 8) + 3], + xlr_board_fmn_config.bucket_size[(bkt * 8) + 4], + xlr_board_fmn_config.bucket_size[(bkt * 8) + 5], + xlr_board_fmn_config.bucket_size[(bkt * 8) + 6], + xlr_board_fmn_config.bucket_size[(bkt * 8) + 7]); + pr_info("\n"); + + pr_info("Credits distribution :\n"); + pr_info("Station\t: Size\n"); + for (bkt = 0; bkt < 16; bkt++) + pr_info(" %d %d %d %d %d %d %d %d\n", + fmn_info->credit_config[(bkt * 8) + 0], + fmn_info->credit_config[(bkt * 8) + 1], + fmn_info->credit_config[(bkt * 8) + 2], + fmn_info->credit_config[(bkt * 8) + 3], + fmn_info->credit_config[(bkt * 8) + 4], + fmn_info->credit_config[(bkt * 8) + 5], + fmn_info->credit_config[(bkt * 8) + 6], + fmn_info->credit_config[(bkt * 8) + 7]); + pr_info("\n"); +} + +static void check_credit_distribution(void) +{ + struct xlr_board_fmn_config *cfg = &xlr_board_fmn_config; + int bkt, n, total_credits, ncores; + + ncores = hweight32(nlm_current_node()->coremask); + for (bkt = 0; bkt < 128; bkt++) { + total_credits = 0; + for (n = 0; n < ncores; n++) + total_credits += cfg->cpu[n].credit_config[bkt]; + total_credits += cfg->gmac[0].credit_config[bkt]; + total_credits += cfg->gmac[1].credit_config[bkt]; + total_credits += cfg->dma.credit_config[bkt]; + total_credits += cfg->cmp.credit_config[bkt]; + total_credits += cfg->sae.credit_config[bkt]; + total_credits += cfg->xgmac[0].credit_config[bkt]; + total_credits += cfg->xgmac[1].credit_config[bkt]; + if (total_credits > cfg->bucket_size[bkt]) + pr_err("ERROR: Bucket %d: credits (%d) > size (%d)\n", + bkt, total_credits, cfg->bucket_size[bkt]); + } + pr_info("Credit distribution complete.\n"); +} + +/** + * Configure bucket size and credits for a device. 'size' is the size of + * the buckets for the device. This size is distributed among all the CPUs + * so that all of them can send messages to the device. + * + * The device is also given 'cpu_credits' to send messages to the CPUs + * + * @dev_info: FMN information structure for each devices + * @start_stn_id: Starting station id of dev_info + * @end_stn_id: End station id of dev_info + * @num_buckets: Total number of buckets for den_info + * @cpu_credits: Allowed credits to cpu for each devices pointing by dev_info + * @size: Size of the each buckets in the device station + */ +static void setup_fmn_cc(struct xlr_fmn_info *dev_info, int start_stn_id, + int end_stn_id, int num_buckets, int cpu_credits, int size) +{ + int i, j, num_core, n, credits_per_cpu; + struct xlr_fmn_info *cpu = xlr_board_fmn_config.cpu; + + num_core = hweight32(nlm_current_node()->coremask); + dev_info->num_buckets = num_buckets; + dev_info->start_stn_id = start_stn_id; + dev_info->end_stn_id = end_stn_id; + + n = num_core; + if (num_core == 3) + n = 4; + + for (i = start_stn_id; i <= end_stn_id; i++) { + xlr_board_fmn_config.bucket_size[i] = size; + + /* Dividing device credits equally to cpus */ + credits_per_cpu = size / n; + for (j = 0; j < num_core; j++) + cpu[j].credit_config[i] = credits_per_cpu; + + /* credits left to distribute */ + credits_per_cpu = size - (credits_per_cpu * num_core); + + /* distribute the remaining credits (if any), among cores */ + for (j = 0; (j < num_core) && (credits_per_cpu >= 4); j++) { + cpu[j].credit_config[i] += 4; + credits_per_cpu -= 4; + } + } + + /* Distributing cpu per bucket credits to devices */ + for (i = 0; i < num_core; i++) { + for (j = 0; j < FMN_CORE_NBUCKETS; j++) + dev_info->credit_config[(i * 8) + j] = cpu_credits; + } +} + +/* + * Each core has 256 slots and 8 buckets, + * Configure the 8 buckets each with 32 slots + */ +static void setup_cpu_fmninfo(struct xlr_fmn_info *cpu, int num_core) +{ + int i, j; + + for (i = 0; i < num_core; i++) { + cpu[i].start_stn_id = (8 * i); + cpu[i].end_stn_id = (8 * i + 8); + + for (j = cpu[i].start_stn_id; j < cpu[i].end_stn_id; j++) + xlr_board_fmn_config.bucket_size[j] = 32; + } +} + +/** + * Setup the FMN details for each devices according to the device available + * in each variant of XLR/XLS processor + */ +void xlr_board_info_setup(void) +{ + struct xlr_fmn_info *cpu = xlr_board_fmn_config.cpu; + struct xlr_fmn_info *gmac = xlr_board_fmn_config.gmac; + struct xlr_fmn_info *xgmac = xlr_board_fmn_config.xgmac; + struct xlr_fmn_info *dma = &xlr_board_fmn_config.dma; + struct xlr_fmn_info *cmp = &xlr_board_fmn_config.cmp; + struct xlr_fmn_info *sae = &xlr_board_fmn_config.sae; + int processor_id, num_core; + + num_core = hweight32(nlm_current_node()->coremask); + processor_id = read_c0_prid() & PRID_IMP_MASK; + + setup_cpu_fmninfo(cpu, num_core); + switch (processor_id) { + case PRID_IMP_NETLOGIC_XLS104: + case PRID_IMP_NETLOGIC_XLS108: + setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0, + FMN_STNID_GMAC0_TX3, 8, 16, 32); + setup_fmn_cc(dma, FMN_STNID_DMA_0, + FMN_STNID_DMA_3, 4, 8, 64); + setup_fmn_cc(sae, FMN_STNID_SEC0, + FMN_STNID_SEC1, 2, 8, 128); + break; + + case PRID_IMP_NETLOGIC_XLS204: + case PRID_IMP_NETLOGIC_XLS208: + setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0, + FMN_STNID_GMAC0_TX3, 8, 16, 32); + setup_fmn_cc(dma, FMN_STNID_DMA_0, + FMN_STNID_DMA_3, 4, 8, 64); + setup_fmn_cc(sae, FMN_STNID_SEC0, + FMN_STNID_SEC1, 2, 8, 128); + break; + + case PRID_IMP_NETLOGIC_XLS404: + case PRID_IMP_NETLOGIC_XLS408: + case PRID_IMP_NETLOGIC_XLS404B: + case PRID_IMP_NETLOGIC_XLS408B: + case PRID_IMP_NETLOGIC_XLS416B: + case PRID_IMP_NETLOGIC_XLS608B: + case PRID_IMP_NETLOGIC_XLS616B: + setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0, + FMN_STNID_GMAC0_TX3, 8, 8, 32); + setup_fmn_cc(&gmac[1], FMN_STNID_GMAC1_FR_0, + FMN_STNID_GMAC1_TX3, 8, 8, 32); + setup_fmn_cc(dma, FMN_STNID_DMA_0, + FMN_STNID_DMA_3, 4, 4, 64); + setup_fmn_cc(cmp, FMN_STNID_CMP_0, + FMN_STNID_CMP_3, 4, 4, 64); + setup_fmn_cc(sae, FMN_STNID_SEC0, + FMN_STNID_SEC1, 2, 8, 128); + break; + + case PRID_IMP_NETLOGIC_XLS412B: + setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0, + FMN_STNID_GMAC0_TX3, 8, 8, 32); + setup_fmn_cc(&gmac[1], FMN_STNID_GMAC1_FR_0, + FMN_STNID_GMAC1_TX3, 8, 8, 32); + setup_fmn_cc(dma, FMN_STNID_DMA_0, + FMN_STNID_DMA_3, 4, 4, 64); + setup_fmn_cc(cmp, FMN_STNID_CMP_0, + FMN_STNID_CMP_3, 4, 4, 64); + setup_fmn_cc(sae, FMN_STNID_SEC0, + FMN_STNID_SEC1, 2, 8, 128); + break; + + case PRID_IMP_NETLOGIC_XLR308: + case PRID_IMP_NETLOGIC_XLR308C: + setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0, + FMN_STNID_GMAC0_TX3, 8, 16, 32); + setup_fmn_cc(dma, FMN_STNID_DMA_0, + FMN_STNID_DMA_3, 4, 8, 64); + setup_fmn_cc(sae, FMN_STNID_SEC0, + FMN_STNID_SEC1, 2, 4, 128); + break; + + case PRID_IMP_NETLOGIC_XLR532: + case PRID_IMP_NETLOGIC_XLR532C: + case PRID_IMP_NETLOGIC_XLR516C: + case PRID_IMP_NETLOGIC_XLR508C: + setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0, + FMN_STNID_GMAC0_TX3, 8, 16, 32); + setup_fmn_cc(dma, FMN_STNID_DMA_0, + FMN_STNID_DMA_3, 4, 8, 64); + setup_fmn_cc(sae, FMN_STNID_SEC0, + FMN_STNID_SEC1, 2, 4, 128); + break; + + case PRID_IMP_NETLOGIC_XLR732: + case PRID_IMP_NETLOGIC_XLR716: + setup_fmn_cc(&xgmac[0], FMN_STNID_XMAC0_00_TX, + FMN_STNID_XMAC0_15_TX, 8, 0, 32); + setup_fmn_cc(&xgmac[1], FMN_STNID_XMAC1_00_TX, + FMN_STNID_XMAC1_15_TX, 8, 0, 32); + setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0, + FMN_STNID_GMAC0_TX3, 8, 24, 32); + setup_fmn_cc(dma, FMN_STNID_DMA_0, + FMN_STNID_DMA_3, 4, 4, 64); + setup_fmn_cc(sae, FMN_STNID_SEC0, + FMN_STNID_SEC1, 2, 4, 128); + break; + default: + pr_err("Unknown CPU with processor ID [%d]\n", processor_id); + pr_err("Error: Cannot initialize FMN credits.\n"); + } + + check_credit_distribution(); + +#if 0 /* debug */ + print_credit_config(&cpu[0]); + print_credit_config(&gmac[0]); +#endif +} diff --git a/arch/mips/netlogic/xlr/fmn.c b/arch/mips/netlogic/xlr/fmn.c new file mode 100644 index 00000000000..d428e8471ee --- /dev/null +++ b/arch/mips/netlogic/xlr/fmn.c @@ -0,0 +1,204 @@ +/* + * Copyright (c) 2003-2012 Broadcom Corporation + * All Rights Reserved + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the Broadcom + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/kernel.h> +#include <linux/irqreturn.h> +#include <linux/irq.h> +#include <linux/interrupt.h> + +#include <asm/mipsregs.h> +#include <asm/netlogic/interrupt.h> +#include <asm/netlogic/xlr/fmn.h> +#include <asm/netlogic/common.h> + +#define COP2_CC_INIT_CPU_DEST(dest, conf) \ +do { \ + nlm_write_c2_cc##dest(0, conf[(dest * 8) + 0]); \ + nlm_write_c2_cc##dest(1, conf[(dest * 8) + 1]); \ + nlm_write_c2_cc##dest(2, conf[(dest * 8) + 2]); \ + nlm_write_c2_cc##dest(3, conf[(dest * 8) + 3]); \ + nlm_write_c2_cc##dest(4, conf[(dest * 8) + 4]); \ + nlm_write_c2_cc##dest(5, conf[(dest * 8) + 5]); \ + nlm_write_c2_cc##dest(6, conf[(dest * 8) + 6]); \ + nlm_write_c2_cc##dest(7, conf[(dest * 8) + 7]); \ +} while (0) + +struct fmn_message_handler { + void (*action)(int, int, int, int, struct nlm_fmn_msg *, void *); + void *arg; +} msg_handlers[128]; + +/* + * FMN interrupt handler. We configure the FMN so that any messages in + * any of the CPU buckets will trigger an interrupt on the CPU. + * The message can be from any device on the FMN (like NAE/SAE/DMA). + * The source station id is used to figure out which of the registered + * handlers have to be called. + */ +static irqreturn_t fmn_message_handler(int irq, void *data) +{ + struct fmn_message_handler *hndlr; + int bucket, rv; + int size = 0, code = 0, src_stnid = 0; + struct nlm_fmn_msg msg; + uint32_t mflags, bkt_status; + + mflags = nlm_cop2_enable_irqsave(); + /* Disable message ring interrupt */ + nlm_fmn_setup_intr(irq, 0); + while (1) { + /* 8 bkts per core, [24:31] each bit represents one bucket + * Bit is Zero if bucket is not empty */ + bkt_status = (nlm_read_c2_status0() >> 24) & 0xff; + if (bkt_status == 0xff) + break; + for (bucket = 0; bucket < 8; bucket++) { + /* Continue on empty bucket */ + if (bkt_status & (1 << bucket)) + continue; + rv = nlm_fmn_receive(bucket, &size, &code, &src_stnid, + &msg); + if (rv != 0) + continue; + + hndlr = &msg_handlers[src_stnid]; + if (hndlr->action == NULL) + pr_warn("No msgring handler for stnid %d\n", + src_stnid); + else { + nlm_cop2_disable_irqrestore(mflags); + hndlr->action(bucket, src_stnid, size, code, + &msg, hndlr->arg); + mflags = nlm_cop2_enable_irqsave(); + } + } + }; + /* Enable message ring intr, to any thread in core */ + nlm_fmn_setup_intr(irq, (1 << nlm_threads_per_core) - 1); + nlm_cop2_disable_irqrestore(mflags); + return IRQ_HANDLED; +} + +struct irqaction fmn_irqaction = { + .handler = fmn_message_handler, + .flags = IRQF_PERCPU, + .name = "fmn", +}; + +void xlr_percpu_fmn_init(void) +{ + struct xlr_fmn_info *cpu_fmn_info; + int *bucket_sizes; + uint32_t flags; + int id; + + BUG_ON(nlm_thread_id() != 0); + id = nlm_core_id(); + + bucket_sizes = xlr_board_fmn_config.bucket_size; + cpu_fmn_info = &xlr_board_fmn_config.cpu[id]; + flags = nlm_cop2_enable_irqsave(); + + /* Setup bucket sizes for the core. */ + nlm_write_c2_bucksize(0, bucket_sizes[id * 8 + 0]); + nlm_write_c2_bucksize(1, bucket_sizes[id * 8 + 1]); + nlm_write_c2_bucksize(2, bucket_sizes[id * 8 + 2]); + nlm_write_c2_bucksize(3, bucket_sizes[id * 8 + 3]); + nlm_write_c2_bucksize(4, bucket_sizes[id * 8 + 4]); + nlm_write_c2_bucksize(5, bucket_sizes[id * 8 + 5]); + nlm_write_c2_bucksize(6, bucket_sizes[id * 8 + 6]); + nlm_write_c2_bucksize(7, bucket_sizes[id * 8 + 7]); + + /* + * For sending FMN messages, we need credits on the destination + * bucket. Program the credits this core has on the 128 possible + * destination buckets. + * We cannot use a loop here, because the the first argument has + * to be a constant integer value. + */ + COP2_CC_INIT_CPU_DEST(0, cpu_fmn_info->credit_config); + COP2_CC_INIT_CPU_DEST(1, cpu_fmn_info->credit_config); + COP2_CC_INIT_CPU_DEST(2, cpu_fmn_info->credit_config); + COP2_CC_INIT_CPU_DEST(3, cpu_fmn_info->credit_config); + COP2_CC_INIT_CPU_DEST(4, cpu_fmn_info->credit_config); + COP2_CC_INIT_CPU_DEST(5, cpu_fmn_info->credit_config); + COP2_CC_INIT_CPU_DEST(6, cpu_fmn_info->credit_config); + COP2_CC_INIT_CPU_DEST(7, cpu_fmn_info->credit_config); + COP2_CC_INIT_CPU_DEST(8, cpu_fmn_info->credit_config); + COP2_CC_INIT_CPU_DEST(9, cpu_fmn_info->credit_config); + COP2_CC_INIT_CPU_DEST(10, cpu_fmn_info->credit_config); + COP2_CC_INIT_CPU_DEST(11, cpu_fmn_info->credit_config); + COP2_CC_INIT_CPU_DEST(12, cpu_fmn_info->credit_config); + COP2_CC_INIT_CPU_DEST(13, cpu_fmn_info->credit_config); + COP2_CC_INIT_CPU_DEST(14, cpu_fmn_info->credit_config); + COP2_CC_INIT_CPU_DEST(15, cpu_fmn_info->credit_config); + + /* enable FMN interrupts on this CPU */ + nlm_fmn_setup_intr(IRQ_FMN, (1 << nlm_threads_per_core) - 1); + nlm_cop2_disable_irqrestore(flags); +} + + +/* + * Register a FMN message handler with respect to the source station id + * @stnid: source station id + * @action: Handler function pointer + */ +int nlm_register_fmn_handler(int start_stnid, int end_stnid, + void (*action)(int, int, int, int, struct nlm_fmn_msg *, void *), + void *arg) +{ + int sstnid; + + for (sstnid = start_stnid; sstnid <= end_stnid; sstnid++) { + msg_handlers[sstnid].arg = arg; + smp_wmb(); + msg_handlers[sstnid].action = action; + } + pr_debug("Registered FMN msg handler for stnid %d-%d\n", + start_stnid, end_stnid); + return 0; +} + +void nlm_setup_fmn_irq(void) +{ + uint32_t flags; + + /* setup irq only once */ + setup_irq(IRQ_FMN, &fmn_irqaction); + + flags = nlm_cop2_enable_irqsave(); + nlm_fmn_setup_intr(IRQ_FMN, (1 << nlm_threads_per_core) - 1); + nlm_cop2_disable_irqrestore(flags); +} diff --git a/arch/mips/netlogic/xlr/irq.c b/arch/mips/netlogic/xlr/irq.c deleted file mode 100644 index 521bb7377eb..00000000000 --- a/arch/mips/netlogic/xlr/irq.c +++ /dev/null @@ -1,300 +0,0 @@ -/* - * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights - * reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the NetLogic - * license below: - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR - * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE - * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN - * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/linkage.h> -#include <linux/interrupt.h> -#include <linux/spinlock.h> -#include <linux/mm.h> - -#include <asm/mipsregs.h> - -#include <asm/netlogic/xlr/iomap.h> -#include <asm/netlogic/xlr/pic.h> -#include <asm/netlogic/xlr/xlr.h> - -#include <asm/netlogic/interrupt.h> -#include <asm/netlogic/mips-extns.h> - -static u64 nlm_irq_mask; -static DEFINE_SPINLOCK(nlm_pic_lock); - -static void xlr_pic_enable(struct irq_data *d) -{ - nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); - unsigned long flags; - nlm_reg_t reg; - int irq = d->irq; - - WARN(!PIC_IRQ_IS_IRT(irq), "Bad irq %d", irq); - - spin_lock_irqsave(&nlm_pic_lock, flags); - reg = netlogic_read_reg(mmio, PIC_IRT_1_BASE + irq - PIC_IRQ_BASE); - netlogic_write_reg(mmio, PIC_IRT_1_BASE + irq - PIC_IRQ_BASE, - reg | (1 << 6) | (1 << 30) | (1 << 31)); - spin_unlock_irqrestore(&nlm_pic_lock, flags); -} - -static void xlr_pic_mask(struct irq_data *d) -{ - nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); - unsigned long flags; - nlm_reg_t reg; - int irq = d->irq; - - WARN(!PIC_IRQ_IS_IRT(irq), "Bad irq %d", irq); - - spin_lock_irqsave(&nlm_pic_lock, flags); - reg = netlogic_read_reg(mmio, PIC_IRT_1_BASE + irq - PIC_IRQ_BASE); - netlogic_write_reg(mmio, PIC_IRT_1_BASE + irq - PIC_IRQ_BASE, - reg | (1 << 6) | (1 << 30) | (0 << 31)); - spin_unlock_irqrestore(&nlm_pic_lock, flags); -} - -#ifdef CONFIG_PCI -/* Extra ACK needed for XLR on chip PCI controller */ -static void xlr_pci_ack(struct irq_data *d) -{ - nlm_reg_t *pci_mmio = netlogic_io_mmio(NETLOGIC_IO_PCIX_OFFSET); - - netlogic_read_reg(pci_mmio, (0x140 >> 2)); -} - -/* Extra ACK needed for XLS on chip PCIe controller */ -static void xls_pcie_ack(struct irq_data *d) -{ - nlm_reg_t *pcie_mmio_le = netlogic_io_mmio(NETLOGIC_IO_PCIE_1_OFFSET); - - switch (d->irq) { - case PIC_PCIE_LINK0_IRQ: - netlogic_write_reg(pcie_mmio_le, (0x90 >> 2), 0xffffffff); - break; - case PIC_PCIE_LINK1_IRQ: - netlogic_write_reg(pcie_mmio_le, (0x94 >> 2), 0xffffffff); - break; - case PIC_PCIE_LINK2_IRQ: - netlogic_write_reg(pcie_mmio_le, (0x190 >> 2), 0xffffffff); - break; - case PIC_PCIE_LINK3_IRQ: - netlogic_write_reg(pcie_mmio_le, (0x194 >> 2), 0xffffffff); - break; - } -} - -/* For XLS B silicon, the 3,4 PCI interrupts are different */ -static void xls_pcie_ack_b(struct irq_data *d) -{ - nlm_reg_t *pcie_mmio_le = netlogic_io_mmio(NETLOGIC_IO_PCIE_1_OFFSET); - - switch (d->irq) { - case PIC_PCIE_LINK0_IRQ: - netlogic_write_reg(pcie_mmio_le, (0x90 >> 2), 0xffffffff); - break; - case PIC_PCIE_LINK1_IRQ: - netlogic_write_reg(pcie_mmio_le, (0x94 >> 2), 0xffffffff); - break; - case PIC_PCIE_XLSB0_LINK2_IRQ: - netlogic_write_reg(pcie_mmio_le, (0x190 >> 2), 0xffffffff); - break; - case PIC_PCIE_XLSB0_LINK3_IRQ: - netlogic_write_reg(pcie_mmio_le, (0x194 >> 2), 0xffffffff); - break; - } -} -#endif - -static void xlr_pic_ack(struct irq_data *d) -{ - unsigned long flags; - nlm_reg_t *mmio; - int irq = d->irq; - void *hd = irq_data_get_irq_handler_data(d); - - WARN(!PIC_IRQ_IS_IRT(irq), "Bad irq %d", irq); - - if (hd) { - void (*extra_ack)(void *) = hd; - extra_ack(d); - } - mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); - spin_lock_irqsave(&nlm_pic_lock, flags); - netlogic_write_reg(mmio, PIC_INT_ACK, (1 << (irq - PIC_IRQ_BASE))); - spin_unlock_irqrestore(&nlm_pic_lock, flags); -} - -/* - * This chip definition handles interrupts routed thru the XLR - * hardware PIC, currently IRQs 8-39 are mapped to hardware intr - * 0-31 wired the XLR PIC - */ -static struct irq_chip xlr_pic = { - .name = "XLR-PIC", - .irq_enable = xlr_pic_enable, - .irq_mask = xlr_pic_mask, - .irq_ack = xlr_pic_ack, -}; - -static void rsvd_irq_handler(struct irq_data *d) -{ - WARN(d->irq >= PIC_IRQ_BASE, "Bad irq %d", d->irq); -} - -/* - * Chip definition for CPU originated interrupts(timer, msg) and - * IPIs - */ -struct irq_chip nlm_cpu_intr = { - .name = "XLR-CPU-INTR", - .irq_enable = rsvd_irq_handler, - .irq_mask = rsvd_irq_handler, - .irq_ack = rsvd_irq_handler, -}; - -void __init init_xlr_irqs(void) -{ - nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); - uint32_t thread_mask = 1; - int level, i; - - pr_info("Interrupt thread mask [%x]\n", thread_mask); - for (i = 0; i < PIC_NUM_IRTS; i++) { - level = PIC_IRQ_IS_EDGE_TRIGGERED(i); - - /* Bind all PIC irqs to boot cpu */ - netlogic_write_reg(mmio, PIC_IRT_0_BASE + i, thread_mask); - - /* - * Use local scheduling and high polarity for all IRTs - * Invalidate all IRTs, by default - */ - netlogic_write_reg(mmio, PIC_IRT_1_BASE + i, - (level << 30) | (1 << 6) | (PIC_IRQ_BASE + i)); - } - - /* Make all IRQs as level triggered by default */ - for (i = 0; i < NR_IRQS; i++) { - if (PIC_IRQ_IS_IRT(i)) - irq_set_chip_and_handler(i, &xlr_pic, handle_level_irq); - else - irq_set_chip_and_handler(i, &nlm_cpu_intr, - handle_percpu_irq); - } -#ifdef CONFIG_SMP - irq_set_chip_and_handler(IRQ_IPI_SMP_FUNCTION, &nlm_cpu_intr, - nlm_smp_function_ipi_handler); - irq_set_chip_and_handler(IRQ_IPI_SMP_RESCHEDULE, &nlm_cpu_intr, - nlm_smp_resched_ipi_handler); - nlm_irq_mask |= - ((1ULL << IRQ_IPI_SMP_FUNCTION) | (1ULL << IRQ_IPI_SMP_RESCHEDULE)); -#endif - -#ifdef CONFIG_PCI - /* - * For PCI interrupts, we need to ack the PIC controller too, overload - * irq handler data to do this - */ - if (nlm_chip_is_xls()) { - if (nlm_chip_is_xls_b()) { - irq_set_handler_data(PIC_PCIE_LINK0_IRQ, - xls_pcie_ack_b); - irq_set_handler_data(PIC_PCIE_LINK1_IRQ, - xls_pcie_ack_b); - irq_set_handler_data(PIC_PCIE_XLSB0_LINK2_IRQ, - xls_pcie_ack_b); - irq_set_handler_data(PIC_PCIE_XLSB0_LINK3_IRQ, - xls_pcie_ack_b); - } else { - irq_set_handler_data(PIC_PCIE_LINK0_IRQ, xls_pcie_ack); - irq_set_handler_data(PIC_PCIE_LINK1_IRQ, xls_pcie_ack); - irq_set_handler_data(PIC_PCIE_LINK2_IRQ, xls_pcie_ack); - irq_set_handler_data(PIC_PCIE_LINK3_IRQ, xls_pcie_ack); - } - } else { - /* XLR PCI controller ACK */ - irq_set_handler_data(PIC_PCIE_XLSB0_LINK3_IRQ, xlr_pci_ack); - } -#endif - /* unmask all PIC related interrupts. If no handler is installed by the - * drivers, it'll just ack the interrupt and return - */ - for (i = PIC_IRT_FIRST_IRQ; i <= PIC_IRT_LAST_IRQ; i++) - nlm_irq_mask |= (1ULL << i); - - nlm_irq_mask |= (1ULL << IRQ_TIMER); -} - -void __init arch_init_irq(void) -{ - /* Initialize the irq descriptors */ - init_xlr_irqs(); - write_c0_eimr(nlm_irq_mask); -} - -void __cpuinit nlm_smp_irq_init(void) -{ - /* set interrupt mask for non-zero cpus */ - write_c0_eimr(nlm_irq_mask); -} - -asmlinkage void plat_irq_dispatch(void) -{ - uint64_t eirr; - int i; - - eirr = read_c0_eirr() & read_c0_eimr(); - if (!eirr) - return; - - /* no need of EIRR here, writing compare clears interrupt */ - if (eirr & (1 << IRQ_TIMER)) { - do_IRQ(IRQ_TIMER); - return; - } - - /* use dcltz: optimize below code */ - for (i = 63; i != -1; i--) { - if (eirr & (1ULL << i)) - break; - } - if (i == -1) { - pr_err("no interrupt !!\n"); - return; - } - - /* Ack eirr */ - write_c0_eirr(1ULL << i); - - do_IRQ(i); -} diff --git a/arch/mips/netlogic/xlr/platform-flash.c b/arch/mips/netlogic/xlr/platform-flash.c new file mode 100644 index 00000000000..6d3c727e0ef --- /dev/null +++ b/arch/mips/netlogic/xlr/platform-flash.c @@ -0,0 +1,220 @@ +/* + * Copyright 2011, Netlogic Microsystems. + * Copyright 2004, Matt Porter <mporter@kernel.crashing.org> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/resource.h> +#include <linux/spi/flash.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> + +#include <asm/netlogic/haldefs.h> +#include <asm/netlogic/xlr/iomap.h> +#include <asm/netlogic/xlr/flash.h> +#include <asm/netlogic/xlr/bridge.h> +#include <asm/netlogic/xlr/gpio.h> +#include <asm/netlogic/xlr/xlr.h> + +/* + * Default NOR partition layout + */ +static struct mtd_partition xlr_nor_parts[] = { + { + .name = "User FS", + .offset = 0x800000, + .size = MTDPART_SIZ_FULL, + } +}; + +/* + * Default NAND partition layout + */ +static struct mtd_partition xlr_nand_parts[] = { + { + .name = "Root Filesystem", + .offset = 64 * 64 * 2048, + .size = 432 * 64 * 2048, + }, + { + .name = "Home Filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +/* Use PHYSMAP flash for NOR */ +struct physmap_flash_data xlr_nor_data = { + .width = 2, + .parts = xlr_nor_parts, + .nr_parts = ARRAY_SIZE(xlr_nor_parts), +}; + +static struct resource xlr_nor_res[] = { + { + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device xlr_nor_dev = { + .name = "physmap-flash", + .dev = { + .platform_data = &xlr_nor_data, + }, + .num_resources = ARRAY_SIZE(xlr_nor_res), + .resource = xlr_nor_res, +}; + +const char *xlr_part_probes[] = { "cmdlinepart", NULL }; + +/* + * Use "gen_nand" driver for NAND flash + * + * There seems to be no way to store a private pointer containing + * platform specific info in gen_nand drivier. We will use a global + * struct for now, since we currently have only one NAND chip per board. + */ +struct xlr_nand_flash_priv { + int cs; + uint64_t flash_mmio; +}; + +static struct xlr_nand_flash_priv nand_priv; + +static void xlr_nand_ctrl(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + if (ctrl & NAND_CLE) + nlm_write_reg(nand_priv.flash_mmio, + FLASH_NAND_CLE(nand_priv.cs), cmd); + else if (ctrl & NAND_ALE) + nlm_write_reg(nand_priv.flash_mmio, + FLASH_NAND_ALE(nand_priv.cs), cmd); +} + +struct platform_nand_data xlr_nand_data = { + .chip = { + .nr_chips = 1, + .nr_partitions = ARRAY_SIZE(xlr_nand_parts), + .chip_delay = 50, + .partitions = xlr_nand_parts, + .part_probe_types = xlr_part_probes, + }, + .ctrl = { + .cmd_ctrl = xlr_nand_ctrl, + }, +}; + +static struct resource xlr_nand_res[] = { + { + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device xlr_nand_dev = { + .name = "gen_nand", + .id = -1, + .num_resources = ARRAY_SIZE(xlr_nand_res), + .resource = xlr_nand_res, + .dev = { + .platform_data = &xlr_nand_data, + } +}; + +/* + * XLR/XLS supports upto 8 devices on its FLASH interface. The value in + * FLASH_BAR (on the MEM/IO bridge) gives the base for mapping all the + * flash devices. + * Under this, each flash device has an offset and size given by the + * CSBASE_ADDR and CSBASE_MASK registers for the device. + * + * The CSBASE_ registers are expected to be setup by the bootloader. + */ +static void setup_flash_resource(uint64_t flash_mmio, + uint64_t flash_map_base, int cs, struct resource *res) +{ + u32 base, mask; + + base = nlm_read_reg(flash_mmio, FLASH_CSBASE_ADDR(cs)); + mask = nlm_read_reg(flash_mmio, FLASH_CSADDR_MASK(cs)); + + res->start = flash_map_base + ((unsigned long)base << 16); + res->end = res->start + (mask + 1) * 64 * 1024; +} + +static int __init xlr_flash_init(void) +{ + uint64_t gpio_mmio, flash_mmio, flash_map_base; + u32 gpio_resetcfg, flash_bar; + int cs, boot_nand, boot_nor; + + /* Flash address bits 39:24 is in bridge flash BAR */ + flash_bar = nlm_read_reg(nlm_io_base, BRIDGE_FLASH_BAR); + flash_map_base = (flash_bar & 0xffff0000) << 8; + + gpio_mmio = nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET); + flash_mmio = nlm_mmio_base(NETLOGIC_IO_FLASH_OFFSET); + + /* Get the chip reset config */ + gpio_resetcfg = nlm_read_reg(gpio_mmio, GPIO_PWRON_RESET_CFG_REG); + + /* Check for boot flash type */ + boot_nor = boot_nand = 0; + if (nlm_chip_is_xls()) { + /* On XLS, check boot from NAND bit (GPIO reset reg bit 16) */ + if (gpio_resetcfg & (1 << 16)) + boot_nand = 1; + + /* check boot from PCMCIA, (GPIO reset reg bit 15 */ + if ((gpio_resetcfg & (1 << 15)) == 0) + boot_nor = 1; /* not set, booted from NOR */ + } else { /* XLR */ + /* check boot from PCMCIA (bit 16 in GPIO reset on XLR) */ + if ((gpio_resetcfg & (1 << 16)) == 0) + boot_nor = 1; /* not set, booted from NOR */ + } + + /* boot flash at chip select 0 */ + cs = 0; + + if (boot_nand) { + nand_priv.cs = cs; + nand_priv.flash_mmio = flash_mmio; + setup_flash_resource(flash_mmio, flash_map_base, cs, + xlr_nand_res); + + /* Initialize NAND flash at CS 0 */ + nlm_write_reg(flash_mmio, FLASH_CSDEV_PARM(cs), + FLASH_NAND_CSDEV_PARAM); + nlm_write_reg(flash_mmio, FLASH_CSTIME_PARMA(cs), + FLASH_NAND_CSTIME_PARAMA); + nlm_write_reg(flash_mmio, FLASH_CSTIME_PARMB(cs), + FLASH_NAND_CSTIME_PARAMB); + + pr_info("ChipSelect %d: NAND Flash %pR\n", cs, xlr_nand_res); + return platform_device_register(&xlr_nand_dev); + } + + if (boot_nor) { + setup_flash_resource(flash_mmio, flash_map_base, cs, + xlr_nor_res); + pr_info("ChipSelect %d: NOR Flash %pR\n", cs, xlr_nor_res); + return platform_device_register(&xlr_nor_dev); + } + return 0; +} + +arch_initcall(xlr_flash_init); diff --git a/arch/mips/netlogic/xlr/platform.c b/arch/mips/netlogic/xlr/platform.c index 609ec253464..4785932af24 100644 --- a/arch/mips/netlogic/xlr/platform.c +++ b/arch/mips/netlogic/xlr/platform.c @@ -14,19 +14,23 @@ #include <linux/resource.h> #include <linux/serial_8250.h> #include <linux/serial_reg.h> +#include <linux/i2c.h> +#include <linux/usb/ehci_pdriver.h> +#include <linux/usb/ohci_pdriver.h> +#include <asm/netlogic/haldefs.h> #include <asm/netlogic/xlr/iomap.h> #include <asm/netlogic/xlr/pic.h> #include <asm/netlogic/xlr/xlr.h> -unsigned int nlm_xlr_uart_in(struct uart_port *p, int offset) +static unsigned int nlm_xlr_uart_in(struct uart_port *p, int offset) { - nlm_reg_t *mmio; + uint64_t uartbase; unsigned int value; - /* XLR uart does not need any mapping of regs */ - mmio = (nlm_reg_t *)(p->membase + (offset << p->regshift)); - value = netlogic_read_reg(mmio, 0); + /* sign extend to 64 bits, if needed */ + uartbase = (uint64_t)(long)p->membase; + value = nlm_read_reg(uartbase, offset); /* See XLR/XLS errata */ if (offset == UART_MSR) @@ -37,12 +41,12 @@ unsigned int nlm_xlr_uart_in(struct uart_port *p, int offset) return value; } -void nlm_xlr_uart_out(struct uart_port *p, int offset, int value) +static void nlm_xlr_uart_out(struct uart_port *p, int offset, int value) { - nlm_reg_t *mmio; + uint64_t uartbase; - /* XLR uart does not need any mapping of regs */ - mmio = (nlm_reg_t *)(p->membase + (offset << p->regshift)); + /* sign extend to 64 bits, if needed */ + uartbase = (uint64_t)(long)p->membase; /* See XLR/XLS errata */ if (offset == UART_MSR) @@ -50,7 +54,7 @@ void nlm_xlr_uart_out(struct uart_port *p, int offset, int value) else if (offset == UART_MCR) value ^= 0x3; - netlogic_write_reg(mmio, 0, value); + nlm_write_reg(uartbase, offset, value); } #define PORT(_irq) \ @@ -60,7 +64,7 @@ void nlm_xlr_uart_out(struct uart_port *p, int offset, int value) .iotype = UPIO_MEM32, \ .flags = (UPF_SKIP_TEST | \ UPF_FIXED_TYPE | UPF_BOOT_AUTOCONF),\ - .uartclk = PIC_CLKS_PER_SEC, \ + .uartclk = PIC_CLK_HZ, \ .type = PORT_16550A, \ .serial_in = nlm_xlr_uart_in, \ .serial_out = nlm_xlr_uart_out, \ @@ -82,17 +86,165 @@ static struct platform_device uart_device = { static int __init nlm_uart_init(void) { - nlm_reg_t *mmio; + unsigned long uartbase; - mmio = netlogic_io_mmio(NETLOGIC_IO_UART_0_OFFSET); - xlr_uart_data[0].membase = (void __iomem *)mmio; - xlr_uart_data[0].mapbase = CPHYSADDR((unsigned long)mmio); + uartbase = (unsigned long)nlm_mmio_base(NETLOGIC_IO_UART_0_OFFSET); + xlr_uart_data[0].membase = (void __iomem *)uartbase; + xlr_uart_data[0].mapbase = CPHYSADDR(uartbase); - mmio = netlogic_io_mmio(NETLOGIC_IO_UART_1_OFFSET); - xlr_uart_data[1].membase = (void __iomem *)mmio; - xlr_uart_data[1].mapbase = CPHYSADDR((unsigned long)mmio); + uartbase = (unsigned long)nlm_mmio_base(NETLOGIC_IO_UART_1_OFFSET); + xlr_uart_data[1].membase = (void __iomem *)uartbase; + xlr_uart_data[1].mapbase = CPHYSADDR(uartbase); return platform_device_register(&uart_device); } arch_initcall(nlm_uart_init); + +#ifdef CONFIG_USB +/* Platform USB devices, only on XLS chips */ +static u64 xls_usb_dmamask = ~(u32)0; +#define USB_PLATFORM_DEV(n, i, irq) \ + { \ + .name = n, \ + .id = i, \ + .num_resources = 2, \ + .dev = { \ + .dma_mask = &xls_usb_dmamask, \ + .coherent_dma_mask = 0xffffffff, \ + }, \ + .resource = (struct resource[]) { \ + { \ + .flags = IORESOURCE_MEM, \ + }, \ + { \ + .start = irq, \ + .end = irq, \ + .flags = IORESOURCE_IRQ, \ + }, \ + }, \ + } + +static struct usb_ehci_pdata xls_usb_ehci_pdata = { + .caps_offset = 0, +}; + +static struct usb_ohci_pdata xls_usb_ohci_pdata; + +static struct platform_device xls_usb_ehci_device = + USB_PLATFORM_DEV("ehci-platform", 0, PIC_USB_IRQ); +static struct platform_device xls_usb_ohci_device_0 = + USB_PLATFORM_DEV("ohci-platform", 1, PIC_USB_IRQ); +static struct platform_device xls_usb_ohci_device_1 = + USB_PLATFORM_DEV("ohci-platform", 2, PIC_USB_IRQ); + +static struct platform_device *xls_platform_devices[] = { + &xls_usb_ehci_device, + &xls_usb_ohci_device_0, + &xls_usb_ohci_device_1, +}; + +int xls_platform_usb_init(void) +{ + uint64_t usb_mmio, gpio_mmio; + unsigned long memres; + uint32_t val; + + if (!nlm_chip_is_xls()) + return 0; + + gpio_mmio = nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET); + usb_mmio = nlm_mmio_base(NETLOGIC_IO_USB_1_OFFSET); + + /* Clear Rogue Phy INTs */ + nlm_write_reg(usb_mmio, 49, 0x10000000); + /* Enable all interrupts */ + nlm_write_reg(usb_mmio, 50, 0x1f000000); + + /* Enable ports */ + nlm_write_reg(usb_mmio, 1, 0x07000500); + + val = nlm_read_reg(gpio_mmio, 21); + if (((val >> 22) & 0x01) == 0) { + pr_info("Detected USB Device mode - Not supported!\n"); + nlm_write_reg(usb_mmio, 0, 0x01000000); + return 0; + } + + pr_info("Detected USB Host mode - Adding XLS USB devices.\n"); + /* Clear reset, host mode */ + nlm_write_reg(usb_mmio, 0, 0x02000000); + + /* Memory resource for various XLS usb ports */ + usb_mmio = nlm_mmio_base(NETLOGIC_IO_USB_0_OFFSET); + memres = CPHYSADDR((unsigned long)usb_mmio); + xls_usb_ehci_device.resource[0].start = memres; + xls_usb_ehci_device.resource[0].end = memres + 0x400 - 1; + xls_usb_ehci_device.dev.platform_data = &xls_usb_ehci_pdata; + + memres += 0x400; + xls_usb_ohci_device_0.resource[0].start = memres; + xls_usb_ohci_device_0.resource[0].end = memres + 0x400 - 1; + xls_usb_ohci_device_0.dev.platform_data = &xls_usb_ohci_pdata; + + memres += 0x400; + xls_usb_ohci_device_1.resource[0].start = memres; + xls_usb_ohci_device_1.resource[0].end = memres + 0x400 - 1; + xls_usb_ohci_device_1.dev.platform_data = &xls_usb_ohci_pdata; + + return platform_add_devices(xls_platform_devices, + ARRAY_SIZE(xls_platform_devices)); +} + +arch_initcall(xls_platform_usb_init); +#endif + +#ifdef CONFIG_I2C +static struct i2c_board_info nlm_i2c_board_info1[] __initdata = { + /* All XLR boards have this RTC and Max6657 Temp Chip */ + [0] = { + .type = "ds1374", + .addr = 0x68 + }, + [1] = { + .type = "lm90", + .addr = 0x4c + }, +}; + +static struct resource i2c_resources[] = { + [0] = { + .start = 0, /* filled at init */ + .end = 0, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device nlm_xlr_i2c_1 = { + .name = "xlr-i2cbus", + .id = 1, + .num_resources = 1, + .resource = i2c_resources, +}; + +static int __init nlm_i2c_init(void) +{ + int err = 0; + unsigned int offset; + + /* I2C bus 0 does not have any useful devices, configure only bus 1 */ + offset = NETLOGIC_IO_I2C_1_OFFSET; + nlm_xlr_i2c_1.resource[0].start = CPHYSADDR(nlm_mmio_base(offset)); + nlm_xlr_i2c_1.resource[0].end = nlm_xlr_i2c_1.resource[0].start + 0xfff; + + platform_device_register(&nlm_xlr_i2c_1); + + err = i2c_register_board_info(1, nlm_i2c_board_info1, + ARRAY_SIZE(nlm_i2c_board_info1)); + if (err < 0) + pr_err("nlm-i2c: cannot register board I2C devices\n"); + return err; +} + +arch_initcall(nlm_i2c_init); +#endif diff --git a/arch/mips/netlogic/xlr/setup.c b/arch/mips/netlogic/xlr/setup.c index cee25ddd088..d118b9aa764 100644 --- a/arch/mips/netlogic/xlr/setup.c +++ b/arch/mips/netlogic/xlr/setup.c @@ -36,56 +36,43 @@ #include <linux/serial_8250.h> #include <linux/pm.h> +#include <asm/idle.h> #include <asm/reboot.h> #include <asm/time.h> #include <asm/bootinfo.h> -#include <asm/smp-ops.h> #include <asm/netlogic/interrupt.h> #include <asm/netlogic/psb-bootinfo.h> +#include <asm/netlogic/haldefs.h> +#include <asm/netlogic/common.h> #include <asm/netlogic/xlr/xlr.h> #include <asm/netlogic/xlr/iomap.h> #include <asm/netlogic/xlr/pic.h> #include <asm/netlogic/xlr/gpio.h> +#include <asm/netlogic/xlr/fmn.h> -unsigned long netlogic_io_base = (unsigned long)(DEFAULT_NETLOGIC_IO_BASE); -unsigned long nlm_common_ebase = 0x0; +uint64_t nlm_io_base = DEFAULT_NETLOGIC_IO_BASE; struct psb_info nlm_prom_info; -static void __init nlm_early_serial_setup(void) -{ - struct uart_port s; - nlm_reg_t *uart_base; - - uart_base = netlogic_io_mmio(NETLOGIC_IO_UART_0_OFFSET); - memset(&s, 0, sizeof(s)); - s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; - s.iotype = UPIO_MEM32; - s.regshift = 2; - s.irq = PIC_UART_0_IRQ; - s.uartclk = PIC_CLKS_PER_SEC; - s.serial_in = nlm_xlr_uart_in; - s.serial_out = nlm_xlr_uart_out; - s.mapbase = (unsigned long)uart_base; - s.membase = (unsigned char __iomem *)uart_base; - early_serial_setup(&s); -} +/* default to uniprocessor */ +unsigned int nlm_threads_per_core = 1; +struct nlm_soc_info nlm_nodes[NLM_NR_NODES]; +cpumask_t nlm_cpumask = CPU_MASK_CPU0; static void nlm_linux_exit(void) { - nlm_reg_t *mmio; + uint64_t gpiobase; - mmio = netlogic_io_mmio(NETLOGIC_IO_GPIO_OFFSET); + gpiobase = nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET); /* trigger a chip reset by writing 1 to GPIO_SWRESET_REG */ - netlogic_write_reg(mmio, NETLOGIC_GPIO_SWRESET_REG, 1); + nlm_write_reg(gpiobase, GPIO_SWRESET_REG, 1); for ( ; ; ) cpu_wait(); } void __init plat_mem_setup(void) { - panic_timeout = 5; _machine_restart = (void (*)(char *))nlm_linux_exit; _machine_halt = nlm_linux_exit; pm_power_off = nlm_linux_exit; @@ -96,11 +83,22 @@ const char *get_system_type(void) return "Netlogic XLR/XLS Series"; } +unsigned int nlm_get_cpu_frequency(void) +{ + return (unsigned int)nlm_prom_info.cpu_frequency; +} + void __init prom_free_prom_memory(void) { /* Nothing yet */ } +void nlm_percpu_init(int hwcpuid) +{ + if (hwcpuid % 4 == 0) + xlr_percpu_fmn_init(); +} + static void __init build_arcs_cmdline(int *argv) { int i, remain, len; @@ -146,7 +144,7 @@ static void prom_add_memory(void) { struct nlm_boot_mem_map *bootm; u64 start, size; - u64 pref_backup = 512; /* avoid pref walking beyond end */ + u64 pref_backup = 512; /* avoid pref walking beyond end */ int i; bootm = (void *)(long)nlm_prom_info.psb_mem_map; @@ -164,10 +162,24 @@ static void prom_add_memory(void) } } +static void nlm_init_node(void) +{ + struct nlm_soc_info *nodep; + + nodep = nlm_current_node(); + nodep->picbase = nlm_mmio_base(NETLOGIC_IO_PIC_OFFSET); + nodep->ebase = read_c0_ebase() & (~((1 << 12) - 1)); + spin_lock_init(&nodep->piclock); +} + void __init prom_init(void) { int *argv, *envp; /* passed as 32 bit ptrs */ struct psb_info *prom_infop; + void *reset_vec; +#ifdef CONFIG_SMP + int i; +#endif /* truncate to 32 bit and sign extend all args */ argv = (int *)(long)(int)fw_arg1; @@ -175,14 +187,24 @@ void __init prom_init(void) prom_infop = (struct psb_info *)(long)(int)fw_arg3; nlm_prom_info = *prom_infop; + nlm_init_node(); + + /* Update reset entry point with CPU init code */ + reset_vec = (void *)CKSEG1ADDR(RESET_VEC_PHYS); + memset(reset_vec, 0, RESET_VEC_SIZE); + memcpy(reset_vec, (void *)nlm_reset_entry, + (nlm_reset_entry_end - nlm_reset_entry)); - nlm_early_serial_setup(); build_arcs_cmdline(argv); - nlm_common_ebase = read_c0_ebase() & (~((1 << 12) - 1)); prom_add_memory(); #ifdef CONFIG_SMP - nlm_wakeup_secondary_cpus(nlm_prom_info.online_cpu_map); + for (i = 0; i < 32; i++) + if (nlm_prom_info.online_cpu_map & (1 << i)) + cpumask_set_cpu(i, &nlm_cpumask); + nlm_wakeup_secondary_cpus(); register_smp_ops(&nlm_smp_ops); #endif + xlr_board_info_setup(); + xlr_percpu_fmn_init(); } diff --git a/arch/mips/netlogic/xlr/smp.c b/arch/mips/netlogic/xlr/smp.c deleted file mode 100644 index 080284ded50..00000000000 --- a/arch/mips/netlogic/xlr/smp.c +++ /dev/null @@ -1,220 +0,0 @@ -/* - * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights - * reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the NetLogic - * license below: - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR - * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE - * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN - * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/irq.h> - -#include <asm/mmu_context.h> - -#include <asm/netlogic/interrupt.h> -#include <asm/netlogic/mips-extns.h> - -#include <asm/netlogic/xlr/iomap.h> -#include <asm/netlogic/xlr/pic.h> -#include <asm/netlogic/xlr/xlr.h> - -void core_send_ipi(int logical_cpu, unsigned int action) -{ - int cpu = cpu_logical_map(logical_cpu); - u32 tid = cpu & 0x3; - u32 pid = (cpu >> 2) & 0x07; - u32 ipi = (tid << 16) | (pid << 20); - - if (action & SMP_CALL_FUNCTION) - ipi |= IRQ_IPI_SMP_FUNCTION; - else if (action & SMP_RESCHEDULE_YOURSELF) - ipi |= IRQ_IPI_SMP_RESCHEDULE; - else - return; - - pic_send_ipi(ipi); -} - -void nlm_send_ipi_single(int cpu, unsigned int action) -{ - core_send_ipi(cpu, action); -} - -void nlm_send_ipi_mask(const struct cpumask *mask, unsigned int action) -{ - int cpu; - - for_each_cpu(cpu, mask) { - core_send_ipi(cpu, action); - } -} - -/* IRQ_IPI_SMP_FUNCTION Handler */ -void nlm_smp_function_ipi_handler(unsigned int irq, struct irq_desc *desc) -{ - smp_call_function_interrupt(); -} - -/* IRQ_IPI_SMP_RESCHEDULE handler */ -void nlm_smp_resched_ipi_handler(unsigned int irq, struct irq_desc *desc) -{ - scheduler_ipi(); -} - -/* - * Called before going into mips code, early cpu init - */ -void nlm_early_init_secondary(void) -{ - write_c0_ebase((uint32_t)nlm_common_ebase); - /* TLB partition here later */ -} - -/* - * Code to run on secondary just after probing the CPU - */ -static void __cpuinit nlm_init_secondary(void) -{ - nlm_smp_irq_init(); -} - -void nlm_smp_finish(void) -{ -#ifdef notyet - nlm_common_msgring_cpu_init(); -#endif - local_irq_enable(); -} - -void nlm_cpus_done(void) -{ -} - -/* - * Boot all other cpus in the system, initialize them, and bring them into - * the boot function - */ -int nlm_cpu_unblock[NR_CPUS]; -int nlm_cpu_ready[NR_CPUS]; -unsigned long nlm_next_gp; -unsigned long nlm_next_sp; -cpumask_t phys_cpu_present_map; - -void nlm_boot_secondary(int logical_cpu, struct task_struct *idle) -{ - unsigned long gp = (unsigned long)task_thread_info(idle); - unsigned long sp = (unsigned long)__KSTK_TOS(idle); - int cpu = cpu_logical_map(logical_cpu); - - nlm_next_sp = sp; - nlm_next_gp = gp; - - /* barrier */ - __sync(); - nlm_cpu_unblock[cpu] = 1; -} - -void __init nlm_smp_setup(void) -{ - unsigned int boot_cpu; - int num_cpus, i; - - boot_cpu = hard_smp_processor_id(); - cpus_clear(phys_cpu_present_map); - - cpu_set(boot_cpu, phys_cpu_present_map); - __cpu_number_map[boot_cpu] = 0; - __cpu_logical_map[0] = boot_cpu; - cpu_set(0, cpu_possible_map); - - num_cpus = 1; - for (i = 0; i < NR_CPUS; i++) { - /* - * BSP is not set in nlm_cpu_ready array, it is only for - * ASPs (goto see smpboot.S) - */ - if (nlm_cpu_ready[i]) { - cpu_set(i, phys_cpu_present_map); - __cpu_number_map[i] = num_cpus; - __cpu_logical_map[num_cpus] = i; - cpu_set(num_cpus, cpu_possible_map); - ++num_cpus; - } - } - - pr_info("Phys CPU present map: %lx, possible map %lx\n", - (unsigned long)phys_cpu_present_map.bits[0], - (unsigned long)cpu_possible_map.bits[0]); - - pr_info("Detected %i Slave CPU(s)\n", num_cpus); -} - -void nlm_prepare_cpus(unsigned int max_cpus) -{ -} - -struct plat_smp_ops nlm_smp_ops = { - .send_ipi_single = nlm_send_ipi_single, - .send_ipi_mask = nlm_send_ipi_mask, - .init_secondary = nlm_init_secondary, - .smp_finish = nlm_smp_finish, - .cpus_done = nlm_cpus_done, - .boot_secondary = nlm_boot_secondary, - .smp_setup = nlm_smp_setup, - .prepare_cpus = nlm_prepare_cpus, -}; - -unsigned long secondary_entry_point; - -int __cpuinit nlm_wakeup_secondary_cpus(u32 wakeup_mask) -{ - unsigned int tid, pid, ipi, i, boot_cpu; - void *reset_vec; - - secondary_entry_point = (unsigned long)prom_pre_boot_secondary_cpus; - reset_vec = (void *)CKSEG1ADDR(0x1fc00000); - memcpy(reset_vec, nlm_boot_smp_nmi, 0x80); - boot_cpu = hard_smp_processor_id(); - - for (i = 0; i < NR_CPUS; i++) { - if (i == boot_cpu) - continue; - if (wakeup_mask & (1u << i)) { - tid = i & 0x3; - pid = (i >> 2) & 0x7; - ipi = (tid << 16) | (pid << 20) | (1 << 8); - pic_send_ipi(ipi); - } - } - - return 0; -} diff --git a/arch/mips/netlogic/xlr/time.c b/arch/mips/netlogic/xlr/time.c deleted file mode 100644 index 0d81b262593..00000000000 --- a/arch/mips/netlogic/xlr/time.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights - * reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the NetLogic - * license below: - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR - * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE - * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN - * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include <linux/init.h> - -#include <asm/time.h> -#include <asm/netlogic/interrupt.h> -#include <asm/netlogic/psb-bootinfo.h> - -unsigned int __cpuinit get_c0_compare_int(void) -{ - return IRQ_TIMER; -} - -void __init plat_time_init(void) -{ - mips_hpt_frequency = nlm_prom_info.cpu_frequency; - pr_info("MIPS counter frequency [%ld]\n", - (unsigned long)mips_hpt_frequency); -} diff --git a/arch/mips/netlogic/xlr/smpboot.S b/arch/mips/netlogic/xlr/wakeup.c index 8cb7889ce0c..d61cba1e9c6 100644 --- a/arch/mips/netlogic/xlr/smpboot.S +++ b/arch/mips/netlogic/xlr/wakeup.c @@ -32,69 +32,54 @@ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -#include <linux/init.h> +#include <linux/delay.h> +#include <linux/threads.h> #include <asm/asm.h> #include <asm/asm-offsets.h> -#include <asm/regdef.h> #include <asm/mipsregs.h> +#include <asm/addrspace.h> +#include <asm/string.h> -/* - * Early code for secondary CPUs. This will get them out of the bootloader - * code and into linux. Needed because the bootloader area will be taken - * and initialized by linux. - */ - __CPUINIT -NESTED(prom_pre_boot_secondary_cpus, 16, sp) - .set mips64 - mfc0 t0, $15, 1 # read ebase - andi t0, 0x1f # t0 has the processor_id() - sll t0, 2 # offset in cpu array - - PTR_LA t1, nlm_cpu_ready # mark CPU ready - PTR_ADDU t1, t0 - li t2, 1 - sw t2, 0(t1) - - PTR_LA t1, nlm_cpu_unblock - PTR_ADDU t1, t0 -1: lw t2, 0(t1) # wait till unblocked - beqz t2, 1b - nop +#include <asm/netlogic/haldefs.h> +#include <asm/netlogic/common.h> +#include <asm/netlogic/mips-extns.h> - PTR_LA t1, nlm_next_sp - PTR_L sp, 0(t1) - PTR_LA t1, nlm_next_gp - PTR_L gp, 0(t1) +#include <asm/netlogic/xlr/iomap.h> +#include <asm/netlogic/xlr/pic.h> - PTR_LA t0, nlm_early_init_secondary - jalr t0 - nop +int xlr_wakeup_secondary_cpus(void) +{ + struct nlm_soc_info *nodep; + unsigned int i, j, boot_cpu; + volatile u32 *cpu_ready = nlm_get_boot_data(BOOT_CPU_READY); - PTR_LA t0, smp_bootstrap - jr t0 - nop -END(prom_pre_boot_secondary_cpus) - __FINIT - -/* - * NMI code, used for CPU wakeup, copied to reset entry - */ -NESTED(nlm_boot_smp_nmi, 0, sp) - .set push - .set noat - .set mips64 - .set noreorder + /* + * In case of RMI boot, hit with NMI to get the cores + * from bootloader to linux code. + */ + nodep = nlm_get_node(0); + boot_cpu = hard_smp_processor_id(); + nlm_set_nmi_handler(nlm_rmiboot_preboot); + for (i = 0; i < NR_CPUS; i++) { + if (i == boot_cpu || !cpumask_test_cpu(i, &nlm_cpumask)) + continue; + nlm_pic_send_ipi(nodep->picbase, i, 1, 1); /* send NMI */ + } - /* Clear the NMI and BEV bits */ - MFC0 k0, CP0_STATUS - li k1, 0xffb7ffff - and k0, k0, k1 - MTC0 k0, CP0_STATUS + /* Fill up the coremask early */ + nodep->coremask = 1; + for (i = 1; i < nlm_cores_per_node(); i++) { + for (j = 1000000; j > 0; j--) { + if (cpu_ready[i * NLM_THREADS_PER_CORE]) + break; + udelay(10); + } + if (j != 0) + nodep->coremask |= (1u << i); + else + pr_err("Failed to wakeup core %d\n", i); + } - PTR_LA k1, secondary_entry_point - PTR_L k0, 0(k1) - jr k0 - nop - .set pop -END(nlm_boot_smp_nmi) + return 0; +} diff --git a/arch/mips/netlogic/xlr/xlr_console.c b/arch/mips/netlogic/xlr/xlr_console.c deleted file mode 100644 index 759df069220..00000000000 --- a/arch/mips/netlogic/xlr/xlr_console.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights - * reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the NetLogic - * license below: - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR - * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE - * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN - * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include <linux/types.h> -#include <asm/netlogic/xlr/iomap.h> - -void prom_putchar(char c) -{ - nlm_reg_t *mmio; - - mmio = netlogic_io_mmio(NETLOGIC_IO_UART_0_OFFSET); - while (netlogic_read_reg(mmio, 0x5) == 0) - ; - netlogic_write_reg(mmio, 0x0, c); -} |