diff options
Diffstat (limited to 'arch/mips/momentum')
-rw-r--r-- | arch/mips/momentum/ocelot_3/Makefile | 2 | ||||
-rw-r--r-- | arch/mips/momentum/ocelot_3/ocelot_3_fpga.h | 6 | ||||
-rw-r--r-- | arch/mips/momentum/ocelot_3/platform.c | 235 | ||||
-rw-r--r-- | arch/mips/momentum/ocelot_3/prom.c | 58 | ||||
-rw-r--r-- | arch/mips/momentum/ocelot_3/setup.c | 2 | ||||
-rw-r--r-- | arch/mips/momentum/ocelot_c/Makefile | 2 | ||||
-rw-r--r-- | arch/mips/momentum/ocelot_c/ocelot_c_fpga.h | 6 | ||||
-rw-r--r-- | arch/mips/momentum/ocelot_c/platform.c | 201 | ||||
-rw-r--r-- | arch/mips/momentum/ocelot_c/prom.c | 60 | ||||
-rw-r--r-- | arch/mips/momentum/ocelot_c/setup.c | 23 | ||||
-rw-r--r-- | arch/mips/momentum/ocelot_g/gt-irq.c | 8 | ||||
-rw-r--r-- | arch/mips/momentum/ocelot_g/ocelot_pld.h | 6 | ||||
-rw-r--r-- | arch/mips/momentum/ocelot_g/setup.c | 5 |
13 files changed, 469 insertions, 145 deletions
diff --git a/arch/mips/momentum/ocelot_3/Makefile b/arch/mips/momentum/ocelot_3/Makefile index 8bcea64dd27..d5a090a85a1 100644 --- a/arch/mips/momentum/ocelot_3/Makefile +++ b/arch/mips/momentum/ocelot_3/Makefile @@ -5,4 +5,4 @@ # removes any old dependencies. DON'T put your own dependencies here # unless it's something special (ie not a .c file). # -obj-y += irq.o prom.o reset.o setup.o +obj-y += irq.o platform.o prom.o reset.o setup.o diff --git a/arch/mips/momentum/ocelot_3/ocelot_3_fpga.h b/arch/mips/momentum/ocelot_3/ocelot_3_fpga.h index 227e429fe72..5710a9029f1 100644 --- a/arch/mips/momentum/ocelot_3/ocelot_3_fpga.h +++ b/arch/mips/momentum/ocelot_3/ocelot_3_fpga.h @@ -51,7 +51,9 @@ extern unsigned long ocelot_fpga_base; -#define OCELOT_FPGA_WRITE(x, y) writeb(x, ocelot_fpga_base + OCELOT_3_REG_##y) -#define OCELOT_FPGA_READ(x) readb(ocelot_fpga_base + OCELOT_3_REG_##x) +#define __FPGA_REG_TO_ADDR(reg) \ + ((void *) ocelot_fpga_base + OCELOT_3_REG_##reg) +#define OCELOT_FPGA_WRITE(x, reg) writeb(x, __FPGA_REG_TO_ADDR(reg)) +#define OCELOT_FPGA_READ(reg) readb(__FPGA_REG_TO_ADDR(reg)) #endif diff --git a/arch/mips/momentum/ocelot_3/platform.c b/arch/mips/momentum/ocelot_3/platform.c new file mode 100644 index 00000000000..eefe5841fbb --- /dev/null +++ b/arch/mips/momentum/ocelot_3/platform.c @@ -0,0 +1,235 @@ +#include <linux/delay.h> +#include <linux/if_ether.h> +#include <linux/ioport.h> +#include <linux/mv643xx.h> +#include <linux/platform_device.h> + +#include "ocelot_3_fpga.h" + +#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE) + +static struct resource mv643xx_eth_shared_resources[] = { + [0] = { + .name = "ethernet shared base", + .start = 0xf1000000 + MV643XX_ETH_SHARED_REGS, + .end = 0xf1000000 + MV643XX_ETH_SHARED_REGS + + MV643XX_ETH_SHARED_REGS_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device mv643xx_eth_shared_device = { + .name = MV643XX_ETH_SHARED_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(mv643xx_eth_shared_resources), + .resource = mv643xx_eth_shared_resources, +}; + +#define MV_SRAM_BASE 0xfe000000UL +#define MV_SRAM_SIZE (256 * 1024) + +#define MV_SRAM_RXRING_SIZE (MV_SRAM_SIZE / 4) +#define MV_SRAM_TXRING_SIZE (MV_SRAM_SIZE / 4) + +#define MV_SRAM_BASE_ETH0 MV_SRAM_BASE +#define MV_SRAM_BASE_ETH1 (MV_SRAM_BASE + (MV_SRAM_SIZE / 2)) + +#define MV64x60_IRQ_ETH_0 48 +#define MV64x60_IRQ_ETH_1 49 +#define MV64x60_IRQ_ETH_2 50 + +#ifdef CONFIG_MV643XX_ETH_0 + +static struct resource mv64x60_eth0_resources[] = { + [0] = { + .name = "eth0 irq", + .start = MV64x60_IRQ_ETH_0, + .end = MV64x60_IRQ_ETH_0, + .flags = IORESOURCE_IRQ, + }, +}; + +static char eth0_mac_addr[ETH_ALEN]; + +static struct mv643xx_eth_platform_data eth0_pd = { + .mac_addr = eth0_mac_addr, + + .tx_sram_addr = MV_SRAM_BASE_ETH0, + .tx_sram_size = MV_SRAM_TXRING_SIZE, + .tx_queue_size = MV_SRAM_TXRING_SIZE / 16, + + .rx_sram_addr = MV_SRAM_BASE_ETH0 + MV_SRAM_TXRING_SIZE, + .rx_sram_size = MV_SRAM_RXRING_SIZE, + .rx_queue_size = MV_SRAM_RXRING_SIZE / 16, +}; + +static struct platform_device eth0_device = { + .name = MV643XX_ETH_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(mv64x60_eth0_resources), + .resource = mv64x60_eth0_resources, + .dev = { + .platform_data = ð0_pd, + }, +}; +#endif /* CONFIG_MV643XX_ETH_0 */ + +#ifdef CONFIG_MV643XX_ETH_1 + +static struct resource mv64x60_eth1_resources[] = { + [0] = { + .name = "eth1 irq", + .start = MV64x60_IRQ_ETH_1, + .end = MV64x60_IRQ_ETH_1, + .flags = IORESOURCE_IRQ, + }, +}; + +static char eth1_mac_addr[ETH_ALEN]; + +static struct mv643xx_eth_platform_data eth1_pd = { + .mac_addr = eth1_mac_addr, + + .tx_sram_addr = MV_SRAM_BASE_ETH1, + .tx_sram_size = MV_SRAM_TXRING_SIZE, + .tx_queue_size = MV_SRAM_TXRING_SIZE / 16, + + .rx_sram_addr = MV_SRAM_BASE_ETH1 + MV_SRAM_TXRING_SIZE, + .rx_sram_size = MV_SRAM_RXRING_SIZE, + .rx_queue_size = MV_SRAM_RXRING_SIZE / 16, +}; + +static struct platform_device eth1_device = { + .name = MV643XX_ETH_NAME, + .id = 1, + .num_resources = ARRAY_SIZE(mv64x60_eth1_resources), + .resource = mv64x60_eth1_resources, + .dev = { + .platform_data = ð1_pd, + }, +}; +#endif /* CONFIG_MV643XX_ETH_1 */ + +#ifdef CONFIG_MV643XX_ETH_2 + +static struct resource mv64x60_eth2_resources[] = { + [0] = { + .name = "eth2 irq", + .start = MV64x60_IRQ_ETH_2, + .end = MV64x60_IRQ_ETH_2, + .flags = IORESOURCE_IRQ, + }, +}; + +static char eth2_mac_addr[ETH_ALEN]; + +static struct mv643xx_eth_platform_data eth2_pd = { + .mac_addr = eth2_mac_addr, +}; + +static struct platform_device eth2_device = { + .name = MV643XX_ETH_NAME, + .id = 1, + .num_resources = ARRAY_SIZE(mv64x60_eth2_resources), + .resource = mv64x60_eth2_resources, + .dev = { + .platform_data = ð2_pd, + }, +}; +#endif /* CONFIG_MV643XX_ETH_2 */ + +static struct platform_device *mv643xx_eth_pd_devs[] __initdata = { + &mv643xx_eth_shared_device, +#ifdef CONFIG_MV643XX_ETH_0 + ð0_device, +#endif +#ifdef CONFIG_MV643XX_ETH_1 + ð1_device, +#endif +#ifdef CONFIG_MV643XX_ETH_2 + ð2_device, +#endif +}; + +static u8 __init exchange_bit(u8 val, u8 cs) +{ + /* place the data */ + OCELOT_FPGA_WRITE((val << 2) | cs, EEPROM_MODE); + udelay(1); + + /* turn the clock on */ + OCELOT_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE); + udelay(1); + + /* turn the clock off and read-strobe */ + OCELOT_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE); + + /* return the data */ + return (OCELOT_FPGA_READ(EEPROM_MODE) >> 3) & 0x1; +} + +static void __init get_mac(char dest[6]) +{ + u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; + int i,j; + + for (i = 0; i < 12; i++) + exchange_bit(read_opcode[i], 1); + + for (j = 0; j < 6; j++) { + dest[j] = 0; + for (i = 0; i < 8; i++) { + dest[j] <<= 1; + dest[j] |= exchange_bit(0, 1); + } + } + + /* turn off CS */ + exchange_bit(0,0); +} + +/* + * Copy and increment ethernet MAC address by a small value. + * + * This is useful for systems where the only one MAC address is stored in + * non-volatile memory for multiple ports. + */ +static inline void eth_mac_add(unsigned char *dst, unsigned char *src, + unsigned int add) +{ + int i; + + BUG_ON(add >= 256); + + for (i = ETH_ALEN; i >= 0; i--) { + dst[i] = src[i] + add; + add = dst[i] < src[i]; /* compute carry */ + } + + WARN_ON(add); +} + +static int __init mv643xx_eth_add_pds(void) +{ + unsigned char mac[ETH_ALEN]; + int ret; + + get_mac(mac); +#ifdef CONFIG_MV643XX_ETH_0 + eth_mac_add(eth1_mac_addr, mac, 0); +#endif +#ifdef CONFIG_MV643XX_ETH_1 + eth_mac_add(eth1_mac_addr, mac, 1); +#endif +#ifdef CONFIG_MV643XX_ETH_2 + eth_mac_add(eth2_mac_addr, mac, 2); +#endif + ret = platform_add_devices(mv643xx_eth_pd_devs, + ARRAY_SIZE(mv643xx_eth_pd_devs)); + + return ret; +} + +device_initcall(mv643xx_eth_add_pds); + +#endif /* defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE) */ diff --git a/arch/mips/momentum/ocelot_3/prom.c b/arch/mips/momentum/ocelot_3/prom.c index 296d945bc24..6ce9b7fdb82 100644 --- a/arch/mips/momentum/ocelot_3/prom.c +++ b/arch/mips/momentum/ocelot_3/prom.c @@ -34,64 +34,11 @@ struct callvectors* debug_vectors; extern unsigned long marvell_base; extern unsigned long cpu_clock; -#ifdef CONFIG_MV643XX_ETH -extern unsigned char prom_mac_addr_base[6]; -#endif - const char *get_system_type(void) { return "Momentum Ocelot-3"; } -#ifdef CONFIG_MV643XX_ETH -void burn_clocks(void) -{ - int i; - - /* this loop should burn at least 1us -- this should be plenty */ - for (i = 0; i < 0x10000; i++) - ; -} - -u8 exchange_bit(u8 val, u8 cs) -{ - /* place the data */ - OCELOT_FPGA_WRITE((val << 2) | cs, EEPROM_MODE); - burn_clocks(); - - /* turn the clock on */ - OCELOT_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE); - burn_clocks(); - - /* turn the clock off and read-strobe */ - OCELOT_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE); - - /* return the data */ - return ((OCELOT_FPGA_READ(EEPROM_MODE) >> 3) & 0x1); -} - -void get_mac(char dest[6]) -{ - u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; - int i,j; - - for (i = 0; i < 12; i++) - exchange_bit(read_opcode[i], 1); - - for (j = 0; j < 6; j++) { - dest[j] = 0; - for (i = 0; i < 8; i++) { - dest[j] <<= 1; - dest[j] |= exchange_bit(0, 1); - } - } - - /* turn off CS */ - exchange_bit(0,0); -} -#endif - - #ifdef CONFIG_64BIT unsigned long signext(unsigned long addr) @@ -228,11 +175,6 @@ void __init prom_init(void) mips_machgroup = MACH_GROUP_MOMENCO; mips_machtype = MACH_MOMENCO_OCELOT_3; -#ifdef CONFIG_MV643XX_ETH - /* get the base MAC address for on-board ethernet ports */ - get_mac(prom_mac_addr_base); -#endif - #ifndef CONFIG_64BIT debug_vectors->printf("Booting Linux kernel...\n"); #endif diff --git a/arch/mips/momentum/ocelot_3/setup.c b/arch/mips/momentum/ocelot_3/setup.c index 7d74f8c5412..ff0829f8111 100644 --- a/arch/mips/momentum/ocelot_3/setup.c +++ b/arch/mips/momentum/ocelot_3/setup.c @@ -4,7 +4,7 @@ * BRIEF MODULE DESCRIPTION * Momentum Computer Ocelot-3 board dependent boot routines * - * Copyright (C) 1996, 1997, 01, 05 Ralf Baechle + * Copyright (C) 1996, 1997, 01, 05 - 06 Ralf Baechle * Copyright (C) 2000 RidgeRun, Inc. * Copyright (C) 2001 Red Hat, Inc. * Copyright (C) 2002 Momentum Computer diff --git a/arch/mips/momentum/ocelot_c/Makefile b/arch/mips/momentum/ocelot_c/Makefile index 94802b4db47..d69161aa167 100644 --- a/arch/mips/momentum/ocelot_c/Makefile +++ b/arch/mips/momentum/ocelot_c/Makefile @@ -2,7 +2,7 @@ # Makefile for Momentum Computer's Ocelot-C and -CS boards. # -obj-y += cpci-irq.o irq.o prom.o reset.o \ +obj-y += cpci-irq.o irq.o platform.o prom.o reset.o \ setup.o uart-irq.o obj-$(CONFIG_KGDB) += dbg_io.o diff --git a/arch/mips/momentum/ocelot_c/ocelot_c_fpga.h b/arch/mips/momentum/ocelot_c/ocelot_c_fpga.h index 7228cd19e5e..f0f5581dcb5 100644 --- a/arch/mips/momentum/ocelot_c/ocelot_c_fpga.h +++ b/arch/mips/momentum/ocelot_c/ocelot_c_fpga.h @@ -53,7 +53,9 @@ #define OCELOT_C_REG_INTSET 0xe #define OCELOT_C_REG_INTCLR 0xf -#define OCELOT_FPGA_WRITE(x, y) writeb(x, OCELOT_C_CS0_ADDR + OCELOT_C_REG_##y) -#define OCELOT_FPGA_READ(x) readb(OCELOT_C_CS0_ADDR + OCELOT_C_REG_##x) +#define __FPGA_REG_TO_ADDR(reg) \ + ((void *) OCELOT_C_CS0_ADDR + OCELOT_C_REG_##reg) +#define OCELOT_FPGA_WRITE(x, reg) writeb(x, __FPGA_REG_TO_ADDR(reg)) +#define OCELOT_FPGA_READ(reg) readb(__FPGA_REG_TO_ADDR(reg)) #endif diff --git a/arch/mips/momentum/ocelot_c/platform.c b/arch/mips/momentum/ocelot_c/platform.c new file mode 100644 index 00000000000..6c495b2f156 --- /dev/null +++ b/arch/mips/momentum/ocelot_c/platform.c @@ -0,0 +1,201 @@ +#include <linux/delay.h> +#include <linux/if_ether.h> +#include <linux/ioport.h> +#include <linux/mv643xx.h> +#include <linux/platform_device.h> + +#include "ocelot_c_fpga.h" + +#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE) + +static struct resource mv643xx_eth_shared_resources[] = { + [0] = { + .name = "ethernet shared base", + .start = 0xf1000000 + MV643XX_ETH_SHARED_REGS, + .end = 0xf1000000 + MV643XX_ETH_SHARED_REGS + + MV643XX_ETH_SHARED_REGS_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device mv643xx_eth_shared_device = { + .name = MV643XX_ETH_SHARED_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(mv643xx_eth_shared_resources), + .resource = mv643xx_eth_shared_resources, +}; + +#define MV_SRAM_BASE 0xfe000000UL +#define MV_SRAM_SIZE (256 * 1024) + +#define MV_SRAM_RXRING_SIZE (MV_SRAM_SIZE / 4) +#define MV_SRAM_TXRING_SIZE (MV_SRAM_SIZE / 4) + +#define MV_SRAM_BASE_ETH0 MV_SRAM_BASE +#define MV_SRAM_BASE_ETH1 (MV_SRAM_BASE + (MV_SRAM_SIZE / 2)) + +#define MV64x60_IRQ_ETH_0 48 +#define MV64x60_IRQ_ETH_1 49 + +#ifdef CONFIG_MV643XX_ETH_0 + +static struct resource mv64x60_eth0_resources[] = { + [0] = { + .name = "eth0 irq", + .start = MV64x60_IRQ_ETH_0, + .end = MV64x60_IRQ_ETH_0, + .flags = IORESOURCE_IRQ, + }, +}; + +static char eth0_mac_addr[ETH_ALEN]; + +static struct mv643xx_eth_platform_data eth0_pd = { + .mac_addr = eth0_mac_addr, + + .tx_sram_addr = MV_SRAM_BASE_ETH0, + .tx_sram_size = MV_SRAM_TXRING_SIZE, + .tx_queue_size = MV_SRAM_TXRING_SIZE / 16, + + .rx_sram_addr = MV_SRAM_BASE_ETH0 + MV_SRAM_TXRING_SIZE, + .rx_sram_size = MV_SRAM_RXRING_SIZE, + .rx_queue_size = MV_SRAM_RXRING_SIZE / 16, +}; + +static struct platform_device eth0_device = { + .name = MV643XX_ETH_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(mv64x60_eth0_resources), + .resource = mv64x60_eth0_resources, + .dev = { + .platform_data = ð0_pd, + }, +}; +#endif /* CONFIG_MV643XX_ETH_0 */ + +#ifdef CONFIG_MV643XX_ETH_1 + +static struct resource mv64x60_eth1_resources[] = { + [0] = { + .name = "eth1 irq", + .start = MV64x60_IRQ_ETH_1, + .end = MV64x60_IRQ_ETH_1, + .flags = IORESOURCE_IRQ, + }, +}; + +static char eth1_mac_addr[ETH_ALEN]; + +static struct mv643xx_eth_platform_data eth1_pd = { + .mac_addr = eth1_mac_addr, + + .tx_sram_addr = MV_SRAM_BASE_ETH1, + .tx_sram_size = MV_SRAM_TXRING_SIZE, + .tx_queue_size = MV_SRAM_TXRING_SIZE / 16, + + .rx_sram_addr = MV_SRAM_BASE_ETH1 + MV_SRAM_TXRING_SIZE, + .rx_sram_size = MV_SRAM_RXRING_SIZE, + .rx_queue_size = MV_SRAM_RXRING_SIZE / 16, +}; + +static struct platform_device eth1_device = { + .name = MV643XX_ETH_NAME, + .id = 1, + .num_resources = ARRAY_SIZE(mv64x60_eth1_resources), + .resource = mv64x60_eth1_resources, + .dev = { + .platform_data = ð1_pd, + }, +}; +#endif /* CONFIG_MV643XX_ETH_1 */ + +static struct platform_device *mv643xx_eth_pd_devs[] __initdata = { + &mv643xx_eth_shared_device, +#ifdef CONFIG_MV643XX_ETH_0 + ð0_device, +#endif +#ifdef CONFIG_MV643XX_ETH_1 + ð1_device, +#endif + /* The third port is not wired up on the Ocelot C */ +}; + +static u8 __init exchange_bit(u8 val, u8 cs) +{ + /* place the data */ + OCELOT_FPGA_WRITE((val << 2) | cs, EEPROM_MODE); + udelay(1); + + /* turn the clock on */ + OCELOT_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE); + udelay(1); + + /* turn the clock off and read-strobe */ + OCELOT_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE); + + /* return the data */ + return (OCELOT_FPGA_READ(EEPROM_MODE) >> 3) & 0x1; +} + +static void __init get_mac(char dest[6]) +{ + u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; + int i,j; + + for (i = 0; i < 12; i++) + exchange_bit(read_opcode[i], 1); + + for (j = 0; j < 6; j++) { + dest[j] = 0; + for (i = 0; i < 8; i++) { + dest[j] <<= 1; + dest[j] |= exchange_bit(0, 1); + } + } + + /* turn off CS */ + exchange_bit(0,0); +} + +/* + * Copy and increment ethernet MAC address by a small value. + * + * This is useful for systems where the only one MAC address is stored in + * non-volatile memory for multiple ports. + */ +static inline void eth_mac_add(unsigned char *dst, unsigned char *src, + unsigned int add) +{ + int i; + + BUG_ON(add >= 256); + + for (i = ETH_ALEN; i >= 0; i--) { + dst[i] = src[i] + add; + add = dst[i] < src[i]; /* compute carry */ + } + + WARN_ON(add); +} + +static int __init mv643xx_eth_add_pds(void) +{ + unsigned char mac[ETH_ALEN]; + int ret; + + get_mac(mac); +#ifdef CONFIG_MV643XX_ETH_0 + eth_mac_add(eth1_mac_addr, mac, 0); +#endif +#ifdef CONFIG_MV643XX_ETH_1 + eth_mac_add(eth1_mac_addr, mac, 1); +#endif + ret = platform_add_devices(mv643xx_eth_pd_devs, + ARRAY_SIZE(mv643xx_eth_pd_devs)); + + return ret; +} + +device_initcall(mv643xx_eth_add_pds); + +#endif /* defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE) */ diff --git a/arch/mips/momentum/ocelot_c/prom.c b/arch/mips/momentum/ocelot_c/prom.c index 4c50a147f42..d0b77e101d7 100644 --- a/arch/mips/momentum/ocelot_c/prom.c +++ b/arch/mips/momentum/ocelot_c/prom.c @@ -29,11 +29,7 @@ struct callvectors* debug_vectors; extern unsigned long marvell_base; -extern unsigned long cpu_clock; - -#ifdef CONFIG_MV643XX_ETH -extern unsigned char prom_mac_addr_base[6]; -#endif +extern unsigned int cpu_clock; const char *get_system_type(void) { @@ -44,55 +40,6 @@ const char *get_system_type(void) #endif } -#ifdef CONFIG_MV643XX_ETH -static void burn_clocks(void) -{ - int i; - - /* this loop should burn at least 1us -- this should be plenty */ - for (i = 0; i < 0x10000; i++) - ; -} - -static u8 exchange_bit(u8 val, u8 cs) -{ - /* place the data */ - OCELOT_FPGA_WRITE((val << 2) | cs, EEPROM_MODE); - burn_clocks(); - - /* turn the clock on */ - OCELOT_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE); - burn_clocks(); - - /* turn the clock off and read-strobe */ - OCELOT_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE); - - /* return the data */ - return ((OCELOT_FPGA_READ(EEPROM_MODE) >> 3) & 0x1); -} - -void get_mac(char dest[6]) -{ - u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; - int i,j; - - for (i = 0; i < 12; i++) - exchange_bit(read_opcode[i], 1); - - for (j = 0; j < 6; j++) { - dest[j] = 0; - for (i = 0; i < 8; i++) { - dest[j] <<= 1; - dest[j] |= exchange_bit(0, 1); - } - } - - /* turn off CS */ - exchange_bit(0,0); -} -#endif - - #ifdef CONFIG_64BIT unsigned long signext(unsigned long addr) @@ -226,11 +173,6 @@ void __init prom_init(void) mips_machgroup = MACH_GROUP_MOMENCO; mips_machtype = MACH_MOMENCO_OCELOT_C; -#ifdef CONFIG_MV643XX_ETH - /* get the base MAC address for on-board ethernet ports */ - get_mac(prom_mac_addr_base); -#endif - #ifndef CONFIG_64BIT debug_vectors->printf("Booting Linux kernel...\n"); #endif diff --git a/arch/mips/momentum/ocelot_c/setup.c b/arch/mips/momentum/ocelot_c/setup.c index 9c0c462af65..0b6b2338cfb 100644 --- a/arch/mips/momentum/ocelot_c/setup.c +++ b/arch/mips/momentum/ocelot_c/setup.c @@ -69,8 +69,7 @@ #include "ocelot_c_fpga.h" unsigned long marvell_base; -extern unsigned long mv64340_sram_base; -unsigned long cpu_clock; +unsigned int cpu_clock; /* These functions are used for rebooting or halting the machine*/ extern void momenco_ocelot_restart(char *command); @@ -119,7 +118,6 @@ void PMON_v2_setup(void) add_wired_entry(ENTRYLO(0xfe000000), ENTRYLO(0xff000000), 0xfffffffffe000000, PM_16M); marvell_base = 0xfffffffff4000000; - mv64340_sram_base = 0xfffffffffe000000; #else /* marvell and extra space */ add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000), 0xf4000000, PM_64K); @@ -129,7 +127,6 @@ void PMON_v2_setup(void) add_wired_entry(ENTRYLO(0xfe000000), ENTRYLO(0xff000000), 0xfe000000, PM_16M); marvell_base = 0xf4000000; - mv64340_sram_base = 0xfe000000; #endif } @@ -346,22 +343,20 @@ void __init plat_mem_setup(void) } } -#ifndef CONFIG_64BIT -/* This needs to be one of the first initcalls, because no I/O port access - can work before this */ +/* + * This needs to be one of the first initcalls, because no I/O port access + * can work before this + */ static int io_base_ioremap(void) { - /* we're mapping PCI accesses from 0xc0000000 to 0xf0000000 */ - void *io_remap_range = ioremap(0xc0000000, 0x30000000); + void __iomem * io_remap_range = ioremap(0xc0000000UL, 0x10000); - if (!io_remap_range) { + if (!io_remap_range) panic("Could not ioremap I/O port range"); - } - printk("io_remap_range set at 0x%08x\n", (uint32_t)io_remap_range); - set_io_port_base(io_remap_range - 0xc0000000); + + set_io_port_base((unsigned long) io_remap_range); return 0; } module_init(io_base_ioremap); -#endif diff --git a/arch/mips/momentum/ocelot_g/gt-irq.c b/arch/mips/momentum/ocelot_g/gt-irq.c index 7b5cc6648f7..e5576bd50fa 100644 --- a/arch/mips/momentum/ocelot_g/gt-irq.c +++ b/arch/mips/momentum/ocelot_g/gt-irq.c @@ -27,7 +27,7 @@ unsigned long bus_clock; * be handled and ack'ed differently than other MIPS interrupts. */ -#if CURRENTLY_UNUSED +#if 0 struct tq_struct irq_handlers[MAX_CAUSE_REGS][MAX_CAUSE_REG_WIDTH]; void hook_irq_handler(int int_cause, int bit_num, void *isr_ptr); @@ -95,7 +95,7 @@ int disable_galileo_irq(int int_cause, int bit_num) return 0; return 1; } -#endif /* UNUSED */ +#endif /* 0 */ /* * Interrupt handler for interrupts coming from the Galileo chip via P0_INT#. @@ -196,7 +196,7 @@ void gt64240_time_init(void) void gt64240_irq_init(void) { -#if CURRENTLY_UNUSED +#if 0 int i, j; /* Reset irq handlers pointers to NULL */ @@ -208,5 +208,5 @@ void gt64240_irq_init(void) irq_handlers[i][j].data = NULL; } } -#endif +#endif /* 0 */ } diff --git a/arch/mips/momentum/ocelot_g/ocelot_pld.h b/arch/mips/momentum/ocelot_g/ocelot_pld.h index fcb8275e219..95e0534026d 100644 --- a/arch/mips/momentum/ocelot_g/ocelot_pld.h +++ b/arch/mips/momentum/ocelot_g/ocelot_pld.h @@ -23,8 +23,8 @@ #define OCELOT_REG_INTSET (12) #define OCELOT_REG_INTCLR (13) -#define OCELOT_PLD_WRITE(x, y) writeb(x, OCELOT_CS0_ADDR + OCELOT_REG_##y) -#define OCELOT_PLD_READ(x) readb(OCELOT_CS0_ADDR + OCELOT_REG_##x) - +#define __PLD_REG_TO_ADDR(reg) ((void *) OCELOT_CS0_ADDR + OCELOT_REG_##reg) +#define OCELOT_PLD_WRITE(x, reg) writeb(x, __PLD_REG_TO_ADDR(reg)) +#define OCELOT_PLD_READ(reg) readb(__PLD_REG_TO_ADDR(reg)) #endif /* __MOMENCO_OCELOT_PLD_H__ */ diff --git a/arch/mips/momentum/ocelot_g/setup.c b/arch/mips/momentum/ocelot_g/setup.c index 56ec47039c1..d288f7b0184 100644 --- a/arch/mips/momentum/ocelot_g/setup.c +++ b/arch/mips/momentum/ocelot_g/setup.c @@ -57,6 +57,7 @@ #include <asm/gt64240.h> #include <asm/irq.h> #include <asm/pci.h> +#include <asm/pgtable.h> #include <asm/processor.h> #include <asm/reboot.h> #include <linux/bootmem.h> @@ -160,6 +161,10 @@ static void __init setup_l3cache(unsigned long size) printk("Done\n"); } +void __init plat_timer_setup(struct irqaction *irq) +{ +} + void __init plat_mem_setup(void) { void (*l3func)(unsigned long) = (void *) KSEG1ADDR(setup_l3cache); |