diff options
Diffstat (limited to 'arch/mips/kernel')
-rw-r--r-- | arch/mips/kernel/Makefile | 2 | ||||
-rw-r--r-- | arch/mips/kernel/bmips_vec.S | 255 | ||||
-rw-r--r-- | arch/mips/kernel/branch.c | 128 | ||||
-rw-r--r-- | arch/mips/kernel/cevt-bcm1480.c | 2 | ||||
-rw-r--r-- | arch/mips/kernel/cevt-ds1287.c | 2 | ||||
-rw-r--r-- | arch/mips/kernel/cevt-gt641xx.c | 2 | ||||
-rw-r--r-- | arch/mips/kernel/cevt-r4k.c | 2 | ||||
-rw-r--r-- | arch/mips/kernel/cevt-sb1250.c | 2 | ||||
-rw-r--r-- | arch/mips/kernel/cevt-txx9.c | 2 | ||||
-rw-r--r-- | arch/mips/kernel/cpu-probe.c | 28 | ||||
-rw-r--r-- | arch/mips/kernel/i8253.c | 2 | ||||
-rw-r--r-- | arch/mips/kernel/kprobes.c | 177 | ||||
-rw-r--r-- | arch/mips/kernel/perf_event_mipsxx.c | 72 | ||||
-rw-r--r-- | arch/mips/kernel/ptrace.c | 11 | ||||
-rw-r--r-- | arch/mips/kernel/rtlx.c | 1 | ||||
-rw-r--r-- | arch/mips/kernel/setup.c | 43 | ||||
-rw-r--r-- | arch/mips/kernel/smp-bmips.c | 458 | ||||
-rw-r--r-- | arch/mips/kernel/smtc.c | 6 | ||||
-rw-r--r-- | arch/mips/kernel/traps.c | 16 |
19 files changed, 1050 insertions, 161 deletions
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 1a966183e35..0c6877ea900 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -55,9 +55,11 @@ obj-$(CONFIG_CPU_TX49XX) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_VR41XX) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_CAVIUM_OCTEON) += octeon_switch.o obj-$(CONFIG_CPU_XLR) += r4k_fpu.o r4k_switch.o +obj-$(CONFIG_CPU_XLP) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_SMP_UP) += smp-up.o +obj-$(CONFIG_CPU_BMIPS) += smp-bmips.o bmips_vec.o obj-$(CONFIG_MIPS_MT) += mips-mt.o obj-$(CONFIG_MIPS_MT_FPAFF) += mips-mt-fpaff.o diff --git a/arch/mips/kernel/bmips_vec.S b/arch/mips/kernel/bmips_vec.S new file mode 100644 index 00000000000..e908e81330b --- /dev/null +++ b/arch/mips/kernel/bmips_vec.S @@ -0,0 +1,255 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2011 by Kevin Cernekee (cernekee@gmail.com) + * + * Reset/NMI/re-entry vectors for BMIPS processors + */ + +#include <linux/init.h> + +#include <asm/asm.h> +#include <asm/asmmacro.h> +#include <asm/cacheops.h> +#include <asm/regdef.h> +#include <asm/mipsregs.h> +#include <asm/stackframe.h> +#include <asm/addrspace.h> +#include <asm/hazards.h> +#include <asm/bmips.h> + + .macro BARRIER + .set mips32 + _ssnop + _ssnop + _ssnop + .set mips0 + .endm + + __CPUINIT + +/*********************************************************************** + * Alternate CPU1 startup vector for BMIPS4350 + * + * On some systems the bootloader has already started CPU1 and configured + * it to resume execution at 0x8000_0200 (!BEV IV vector) when it is + * triggered by the SW1 interrupt. If that is the case we try to move + * it to a more convenient place: BMIPS_WARM_RESTART_VEC @ 0x8000_0380. + ***********************************************************************/ + +LEAF(bmips_smp_movevec) + la k0, 1f + li k1, CKSEG1 + or k0, k1 + jr k0 + +1: + /* clear IV, pending IPIs */ + mtc0 zero, CP0_CAUSE + + /* re-enable IRQs to wait for SW1 */ + li k0, ST0_IE | ST0_BEV | STATUSF_IP1 + mtc0 k0, CP0_STATUS + + /* set up CPU1 CBR; move BASE to 0xa000_0000 */ + li k0, 0xff400000 + mtc0 k0, $22, 6 + li k1, CKSEG1 | BMIPS_RELO_VECTOR_CONTROL_1 + or k0, k1 + li k1, 0xa0080000 + sw k1, 0(k0) + + /* wait here for SW1 interrupt from bmips_boot_secondary() */ + wait + + la k0, bmips_reset_nmi_vec + li k1, CKSEG1 + or k0, k1 + jr k0 +END(bmips_smp_movevec) + +/*********************************************************************** + * Reset/NMI vector + * For BMIPS processors that can relocate their exception vectors, this + * entire function gets copied to 0x8000_0000. + ***********************************************************************/ + +NESTED(bmips_reset_nmi_vec, PT_SIZE, sp) + .set push + .set noat + .align 4 + +#ifdef CONFIG_SMP + /* if the NMI bit is clear, assume this is a CPU1 reset instead */ + li k1, (1 << 19) + mfc0 k0, CP0_STATUS + and k0, k1 + beqz k0, bmips_smp_entry + +#if defined(CONFIG_CPU_BMIPS5000) + /* if we're not on core 0, this must be the SMP boot signal */ + li k1, (3 << 25) + mfc0 k0, $22 + and k0, k1 + bnez k0, bmips_smp_entry +#endif +#endif /* CONFIG_SMP */ + + /* nope, it's just a regular NMI */ + SAVE_ALL + move a0, sp + + /* clear EXL, ERL, BEV so that TLB refills still work */ + mfc0 k0, CP0_STATUS + li k1, ST0_ERL | ST0_EXL | ST0_BEV | ST0_IE + or k0, k1 + xor k0, k1 + mtc0 k0, CP0_STATUS + BARRIER + + /* jump to the NMI handler function */ + la k0, nmi_handler + jr k0 + + RESTORE_ALL + .set mips3 + eret + +/*********************************************************************** + * CPU1 reset vector (used for the initial boot only) + * This is still part of bmips_reset_nmi_vec(). + ***********************************************************************/ + +#ifdef CONFIG_SMP + +bmips_smp_entry: + + /* set up CP0 STATUS; enable FPU */ + li k0, 0x30000000 + mtc0 k0, CP0_STATUS + BARRIER + + /* set local CP0 CONFIG to make kseg0 cacheable, write-back */ + mfc0 k0, CP0_CONFIG + ori k0, 0x07 + xori k0, 0x04 + mtc0 k0, CP0_CONFIG + +#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380) + /* initialize CPU1's local I-cache */ + li k0, 0x80000000 + li k1, 0x80010000 + mtc0 zero, $28 + mtc0 zero, $28, 1 + BARRIER + +1: cache Index_Store_Tag_I, 0(k0) + addiu k0, 16 + bne k0, k1, 1b +#elif defined(CONFIG_CPU_BMIPS5000) + /* set exception vector base */ + la k0, ebase + lw k0, 0(k0) + mtc0 k0, $15, 1 + BARRIER +#endif + + /* jump back to kseg0 in case we need to remap the kseg1 area */ + la k0, 1f + jr k0 +1: + la k0, bmips_enable_xks01 + jalr k0 + + /* use temporary stack to set up upper memory TLB */ + li sp, BMIPS_WARM_RESTART_VEC + la k0, plat_wired_tlb_setup + jalr k0 + + /* switch to permanent stack and continue booting */ + + .global bmips_secondary_reentry +bmips_secondary_reentry: + la k0, bmips_smp_boot_sp + lw sp, 0(k0) + la k0, bmips_smp_boot_gp + lw gp, 0(k0) + la k0, start_secondary + jr k0 + +#endif /* CONFIG_SMP */ + + .align 4 + .global bmips_reset_nmi_vec_end +bmips_reset_nmi_vec_end: + +END(bmips_reset_nmi_vec) + + .set pop + .previous + +/*********************************************************************** + * CPU1 warm restart vector (used for second and subsequent boots). + * Also used for S2 standby recovery (PM). + * This entire function gets copied to (BMIPS_WARM_RESTART_VEC) + ***********************************************************************/ + +LEAF(bmips_smp_int_vec) + + .align 4 + mfc0 k0, CP0_STATUS + ori k0, 0x01 + xori k0, 0x01 + mtc0 k0, CP0_STATUS + eret + + .align 4 + .global bmips_smp_int_vec_end +bmips_smp_int_vec_end: + +END(bmips_smp_int_vec) + +/*********************************************************************** + * XKS01 support + * Certain CPUs support extending kseg0 to 1024MB. + ***********************************************************************/ + + __CPUINIT + +LEAF(bmips_enable_xks01) + +#if defined(CONFIG_XKS01) + +#if defined(CONFIG_CPU_BMIPS4380) + mfc0 t0, $22, 3 + li t1, 0x1ff0 + li t2, (1 << 12) | (1 << 9) + or t0, t1 + xor t0, t1 + or t0, t2 + mtc0 t0, $22, 3 + BARRIER +#elif defined(CONFIG_CPU_BMIPS5000) + mfc0 t0, $22, 5 + li t1, 0x01ff + li t2, (1 << 8) | (1 << 5) + or t0, t1 + xor t0, t1 + or t0, t2 + mtc0 t0, $22, 5 + BARRIER +#else + +#error Missing XKS01 setup + +#endif + +#endif /* defined(CONFIG_XKS01) */ + + jr ra + +END(bmips_enable_xks01) + + .previous diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c index 32103cc2a25..4d735d0e58f 100644 --- a/arch/mips/kernel/branch.c +++ b/arch/mips/kernel/branch.c @@ -9,6 +9,7 @@ #include <linux/kernel.h> #include <linux/sched.h> #include <linux/signal.h> +#include <linux/module.h> #include <asm/branch.h> #include <asm/cpu.h> #include <asm/cpu-features.h> @@ -17,28 +18,22 @@ #include <asm/ptrace.h> #include <asm/uaccess.h> -/* - * Compute the return address and do emulate branch simulation, if required. +/** + * __compute_return_epc_for_insn - Computes the return address and do emulate + * branch simulation, if required. + * + * @regs: Pointer to pt_regs + * @insn: branch instruction to decode + * @returns: -EFAULT on error and forces SIGBUS, and on success + * returns 0 or BRANCH_LIKELY_TAKEN as appropriate after + * evaluating the branch. */ -int __compute_return_epc(struct pt_regs *regs) +int __compute_return_epc_for_insn(struct pt_regs *regs, + union mips_instruction insn) { - unsigned int __user *addr; unsigned int bit, fcr31, dspcontrol; - long epc; - union mips_instruction insn; - - epc = regs->cp0_epc; - if (epc & 3) - goto unaligned; - - /* - * Read the instruction - */ - addr = (unsigned int __user *) epc; - if (__get_user(insn.word, addr)) { - force_sig(SIGSEGV, current); - return -EFAULT; - } + long epc = regs->cp0_epc; + int ret = 0; switch (insn.i_format.opcode) { /* @@ -64,18 +59,22 @@ int __compute_return_epc(struct pt_regs *regs) switch (insn.i_format.rt) { case bltz_op: case bltzl_op: - if ((long)regs->regs[insn.i_format.rs] < 0) + if ((long)regs->regs[insn.i_format.rs] < 0) { epc = epc + 4 + (insn.i_format.simmediate << 2); - else + if (insn.i_format.rt == bltzl_op) + ret = BRANCH_LIKELY_TAKEN; + } else epc += 8; regs->cp0_epc = epc; break; case bgez_op: case bgezl_op: - if ((long)regs->regs[insn.i_format.rs] >= 0) + if ((long)regs->regs[insn.i_format.rs] >= 0) { epc = epc + 4 + (insn.i_format.simmediate << 2); - else + if (insn.i_format.rt == bgezl_op) + ret = BRANCH_LIKELY_TAKEN; + } else epc += 8; regs->cp0_epc = epc; break; @@ -83,9 +82,11 @@ int __compute_return_epc(struct pt_regs *regs) case bltzal_op: case bltzall_op: regs->regs[31] = epc + 8; - if ((long)regs->regs[insn.i_format.rs] < 0) + if ((long)regs->regs[insn.i_format.rs] < 0) { epc = epc + 4 + (insn.i_format.simmediate << 2); - else + if (insn.i_format.rt == bltzall_op) + ret = BRANCH_LIKELY_TAKEN; + } else epc += 8; regs->cp0_epc = epc; break; @@ -93,12 +94,15 @@ int __compute_return_epc(struct pt_regs *regs) case bgezal_op: case bgezall_op: regs->regs[31] = epc + 8; - if ((long)regs->regs[insn.i_format.rs] >= 0) + if ((long)regs->regs[insn.i_format.rs] >= 0) { epc = epc + 4 + (insn.i_format.simmediate << 2); - else + if (insn.i_format.rt == bgezall_op) + ret = BRANCH_LIKELY_TAKEN; + } else epc += 8; regs->cp0_epc = epc; break; + case bposge32_op: if (!cpu_has_dsp) goto sigill; @@ -133,9 +137,11 @@ int __compute_return_epc(struct pt_regs *regs) case beq_op: case beql_op: if (regs->regs[insn.i_format.rs] == - regs->regs[insn.i_format.rt]) + regs->regs[insn.i_format.rt]) { epc = epc + 4 + (insn.i_format.simmediate << 2); - else + if (insn.i_format.rt == beql_op) + ret = BRANCH_LIKELY_TAKEN; + } else epc += 8; regs->cp0_epc = epc; break; @@ -143,9 +149,11 @@ int __compute_return_epc(struct pt_regs *regs) case bne_op: case bnel_op: if (regs->regs[insn.i_format.rs] != - regs->regs[insn.i_format.rt]) + regs->regs[insn.i_format.rt]) { epc = epc + 4 + (insn.i_format.simmediate << 2); - else + if (insn.i_format.rt == bnel_op) + ret = BRANCH_LIKELY_TAKEN; + } else epc += 8; regs->cp0_epc = epc; break; @@ -153,9 +161,11 @@ int __compute_return_epc(struct pt_regs *regs) case blez_op: /* not really i_format */ case blezl_op: /* rt field assumed to be zero */ - if ((long)regs->regs[insn.i_format.rs] <= 0) + if ((long)regs->regs[insn.i_format.rs] <= 0) { epc = epc + 4 + (insn.i_format.simmediate << 2); - else + if (insn.i_format.rt == bnel_op) + ret = BRANCH_LIKELY_TAKEN; + } else epc += 8; regs->cp0_epc = epc; break; @@ -163,9 +173,11 @@ int __compute_return_epc(struct pt_regs *regs) case bgtz_op: case bgtzl_op: /* rt field assumed to be zero */ - if ((long)regs->regs[insn.i_format.rs] > 0) + if ((long)regs->regs[insn.i_format.rs] > 0) { epc = epc + 4 + (insn.i_format.simmediate << 2); - else + if (insn.i_format.rt == bnel_op) + ret = BRANCH_LIKELY_TAKEN; + } else epc += 8; regs->cp0_epc = epc; break; @@ -187,18 +199,22 @@ int __compute_return_epc(struct pt_regs *regs) switch (insn.i_format.rt & 3) { case 0: /* bc1f */ case 2: /* bc1fl */ - if (~fcr31 & (1 << bit)) + if (~fcr31 & (1 << bit)) { epc = epc + 4 + (insn.i_format.simmediate << 2); - else + if (insn.i_format.rt == 2) + ret = BRANCH_LIKELY_TAKEN; + } else epc += 8; regs->cp0_epc = epc; break; case 1: /* bc1t */ case 3: /* bc1tl */ - if (fcr31 & (1 << bit)) + if (fcr31 & (1 << bit)) { epc = epc + 4 + (insn.i_format.simmediate << 2); - else + if (insn.i_format.rt == 3) + ret = BRANCH_LIKELY_TAKEN; + } else epc += 8; regs->cp0_epc = epc; break; @@ -239,15 +255,39 @@ int __compute_return_epc(struct pt_regs *regs) #endif } - return 0; + return ret; -unaligned: - printk("%s: unaligned epc - sending SIGBUS.\n", current->comm); +sigill: + printk("%s: DSP branch but not DSP ASE - sending SIGBUS.\n", current->comm); force_sig(SIGBUS, current); return -EFAULT; +} +EXPORT_SYMBOL_GPL(__compute_return_epc_for_insn); -sigill: - printk("%s: DSP branch but not DSP ASE - sending SIGBUS.\n", current->comm); +int __compute_return_epc(struct pt_regs *regs) +{ + unsigned int __user *addr; + long epc; + union mips_instruction insn; + + epc = regs->cp0_epc; + if (epc & 3) + goto unaligned; + + /* + * Read the instruction + */ + addr = (unsigned int __user *) epc; + if (__get_user(insn.word, addr)) { + force_sig(SIGSEGV, current); + return -EFAULT; + } + + return __compute_return_epc_for_insn(regs, insn); + +unaligned: + printk("%s: unaligned epc - sending SIGBUS.\n", current->comm); force_sig(SIGBUS, current); return -EFAULT; + } diff --git a/arch/mips/kernel/cevt-bcm1480.c b/arch/mips/kernel/cevt-bcm1480.c index 36c3898b76d..69bbfae183b 100644 --- a/arch/mips/kernel/cevt-bcm1480.c +++ b/arch/mips/kernel/cevt-bcm1480.c @@ -145,7 +145,7 @@ void __cpuinit sb1480_clockevent_init(void) bcm1480_unmask_irq(cpu, irq); action->handler = sibyte_counter_handler; - action->flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER; + action->flags = IRQF_PERCPU | IRQF_TIMER; action->name = name; action->dev_id = cd; diff --git a/arch/mips/kernel/cevt-ds1287.c b/arch/mips/kernel/cevt-ds1287.c index 939157e397b..ed648cb5a69 100644 --- a/arch/mips/kernel/cevt-ds1287.c +++ b/arch/mips/kernel/cevt-ds1287.c @@ -108,7 +108,7 @@ static irqreturn_t ds1287_interrupt(int irq, void *dev_id) static struct irqaction ds1287_irqaction = { .handler = ds1287_interrupt, - .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER, + .flags = IRQF_PERCPU | IRQF_TIMER, .name = "ds1287", }; diff --git a/arch/mips/kernel/cevt-gt641xx.c b/arch/mips/kernel/cevt-gt641xx.c index 339f3639b90..831b47585b7 100644 --- a/arch/mips/kernel/cevt-gt641xx.c +++ b/arch/mips/kernel/cevt-gt641xx.c @@ -114,7 +114,7 @@ static irqreturn_t gt641xx_timer0_interrupt(int irq, void *dev_id) static struct irqaction gt641xx_timer0_irqaction = { .handler = gt641xx_timer0_interrupt, - .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER, + .flags = IRQF_PERCPU | IRQF_TIMER, .name = "gt641xx_timer0", }; diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c index e2d8e199be3..51095dd9599 100644 --- a/arch/mips/kernel/cevt-r4k.c +++ b/arch/mips/kernel/cevt-r4k.c @@ -84,7 +84,7 @@ out: struct irqaction c0_compare_irqaction = { .handler = c0_compare_interrupt, - .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER, + .flags = IRQF_PERCPU | IRQF_TIMER, .name = "timer", }; diff --git a/arch/mips/kernel/cevt-sb1250.c b/arch/mips/kernel/cevt-sb1250.c index 590c54f28a8..e73439fd685 100644 --- a/arch/mips/kernel/cevt-sb1250.c +++ b/arch/mips/kernel/cevt-sb1250.c @@ -144,7 +144,7 @@ void __cpuinit sb1250_clockevent_init(void) sb1250_unmask_irq(cpu, irq); action->handler = sibyte_counter_handler; - action->flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER; + action->flags = IRQF_PERCPU | IRQF_TIMER; action->name = name; action->dev_id = cd; diff --git a/arch/mips/kernel/cevt-txx9.c b/arch/mips/kernel/cevt-txx9.c index f0ab92a1b05..e5c30b1d086 100644 --- a/arch/mips/kernel/cevt-txx9.c +++ b/arch/mips/kernel/cevt-txx9.c @@ -146,7 +146,7 @@ static irqreturn_t txx9tmr_interrupt(int irq, void *dev_id) static struct irqaction txx9tmr_irq = { .handler = txx9tmr_interrupt, - .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER, + .flags = IRQF_PERCPU | IRQF_TIMER, .name = "txx9tmr", .dev_id = &txx9_clock_event_device, }; diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index c7d3cf1ce46..0bab464b8e3 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -191,6 +191,8 @@ void __init check_wait(void) case CPU_CAVIUM_OCTEON_PLUS: case CPU_CAVIUM_OCTEON2: case CPU_JZRISC: + case CPU_XLR: + case CPU_XLP: cpu_wait = r4k_wait; break; @@ -1014,6 +1016,13 @@ static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu) { decode_configs(c); + if ((c->processor_id & 0xff00) == PRID_IMP_NETLOGIC_AU13XX) { + c->cputype = CPU_ALCHEMY; + __cpu_name[cpu] = "Au1300"; + /* following stuff is not for Alchemy */ + return; + } + c->options = (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_COUNTER | @@ -1023,6 +1032,12 @@ static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu) MIPS_CPU_LLSC); switch (c->processor_id & 0xff00) { + case PRID_IMP_NETLOGIC_XLP8XX: + case PRID_IMP_NETLOGIC_XLP3XX: + c->cputype = CPU_XLP; + __cpu_name[cpu] = "Netlogic XLP"; + break; + case PRID_IMP_NETLOGIC_XLR732: case PRID_IMP_NETLOGIC_XLR716: case PRID_IMP_NETLOGIC_XLR532: @@ -1053,14 +1068,21 @@ static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu) break; default: - printk(KERN_INFO "Unknown Netlogic chip id [%02x]!\n", + pr_info("Unknown Netlogic chip id [%02x]!\n", c->processor_id); c->cputype = CPU_XLR; break; } - c->isa_level = MIPS_CPU_ISA_M64R1; - c->tlbsize = ((read_c0_config1() >> 25) & 0x3f) + 1; + if (c->cputype == CPU_XLP) { + c->isa_level = MIPS_CPU_ISA_M64R2; + c->options |= (MIPS_CPU_FPU | MIPS_CPU_ULRI | MIPS_CPU_MCHECK); + /* This will be updated again after all threads are woken up */ + c->tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1; + } else { + c->isa_level = MIPS_CPU_ISA_M64R1; + c->tlbsize = ((read_c0_config1() >> 25) & 0x3f) + 1; + } } #ifdef CONFIG_64BIT diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c index 7047bff35ea..c5bc344fc74 100644 --- a/arch/mips/kernel/i8253.c +++ b/arch/mips/kernel/i8253.c @@ -19,7 +19,7 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id) static struct irqaction irq0 = { .handler = timer_interrupt, - .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER, + .flags = IRQF_NOBALANCING | IRQF_TIMER, .name = "timer" }; diff --git a/arch/mips/kernel/kprobes.c b/arch/mips/kernel/kprobes.c index ee28683fc2a..158467da9bc 100644 --- a/arch/mips/kernel/kprobes.c +++ b/arch/mips/kernel/kprobes.c @@ -25,10 +25,12 @@ #include <linux/kprobes.h> #include <linux/preempt.h> +#include <linux/uaccess.h> #include <linux/kdebug.h> #include <linux/slab.h> #include <asm/ptrace.h> +#include <asm/branch.h> #include <asm/break.h> #include <asm/inst.h> @@ -112,17 +114,49 @@ insn_ok: return 0; } +/* + * insn_has_ll_or_sc function checks whether instruction is ll or sc + * one; putting breakpoint on top of atomic ll/sc pair is bad idea; + * so we need to prevent it and refuse kprobes insertion for such + * instructions; cannot do much about breakpoint in the middle of + * ll/sc pair; it is upto user to avoid those places + */ +static int __kprobes insn_has_ll_or_sc(union mips_instruction insn) +{ + int ret = 0; + + switch (insn.i_format.opcode) { + case ll_op: + case lld_op: + case sc_op: + case scd_op: + ret = 1; + break; + default: + break; + } + return ret; +} + int __kprobes arch_prepare_kprobe(struct kprobe *p) { union mips_instruction insn; union mips_instruction prev_insn; int ret = 0; - prev_insn = p->addr[-1]; insn = p->addr[0]; - if (insn_has_delayslot(insn) || insn_has_delayslot(prev_insn)) { - pr_notice("Kprobes for branch and jump instructions are not supported\n"); + if (insn_has_ll_or_sc(insn)) { + pr_notice("Kprobes for ll and sc instructions are not" + "supported\n"); + ret = -EINVAL; + goto out; + } + + if ((probe_kernel_read(&prev_insn, p->addr - 1, + sizeof(mips_instruction)) == 0) && + insn_has_delayslot(prev_insn)) { + pr_notice("Kprobes for branch delayslot are not supported\n"); ret = -EINVAL; goto out; } @@ -138,9 +172,20 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p) * In the kprobe->ainsn.insn[] array we store the original * instruction at index zero and a break trap instruction at * index one. + * + * On MIPS arch if the instruction at probed address is a + * branch instruction, we need to execute the instruction at + * Branch Delayslot (BD) at the time of probe hit. As MIPS also + * doesn't have single stepping support, the BD instruction can + * not be executed in-line and it would be executed on SSOL slot + * using a normal breakpoint instruction in the next slot. + * So, read the instruction and save it for later execution. */ + if (insn_has_delayslot(insn)) + memcpy(&p->ainsn.insn[0], p->addr + 1, sizeof(kprobe_opcode_t)); + else + memcpy(&p->ainsn.insn[0], p->addr, sizeof(kprobe_opcode_t)); - memcpy(&p->ainsn.insn[0], p->addr, sizeof(kprobe_opcode_t)); p->ainsn.insn[1] = breakpoint2_insn; p->opcode = *p->addr; @@ -191,16 +236,96 @@ static void set_current_kprobe(struct kprobe *p, struct pt_regs *regs, kcb->kprobe_saved_epc = regs->cp0_epc; } -static void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) +/** + * evaluate_branch_instrucion - + * + * Evaluate the branch instruction at probed address during probe hit. The + * result of evaluation would be the updated epc. The insturction in delayslot + * would actually be single stepped using a normal breakpoint) on SSOL slot. + * + * The result is also saved in the kprobe control block for later use, + * in case we need to execute the delayslot instruction. The latter will be + * false for NOP instruction in dealyslot and the branch-likely instructions + * when the branch is taken. And for those cases we set a flag as + * SKIP_DELAYSLOT in the kprobe control block + */ +static int evaluate_branch_instruction(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) { + union mips_instruction insn = p->opcode; + long epc; + int ret = 0; + + epc = regs->cp0_epc; + if (epc & 3) + goto unaligned; + + if (p->ainsn.insn->word == 0) + kcb->flags |= SKIP_DELAYSLOT; + else + kcb->flags &= ~SKIP_DELAYSLOT; + + ret = __compute_return_epc_for_insn(regs, insn); + if (ret < 0) + return ret; + + if (ret == BRANCH_LIKELY_TAKEN) + kcb->flags |= SKIP_DELAYSLOT; + + kcb->target_epc = regs->cp0_epc; + + return 0; + +unaligned: + pr_notice("%s: unaligned epc - sending SIGBUS.\n", current->comm); + force_sig(SIGBUS, current); + return -EFAULT; + +} + +static void prepare_singlestep(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) +{ + int ret = 0; + regs->cp0_status &= ~ST0_IE; /* single step inline if the instruction is a break */ if (p->opcode.word == breakpoint_insn.word || p->opcode.word == breakpoint2_insn.word) regs->cp0_epc = (unsigned long)p->addr; - else - regs->cp0_epc = (unsigned long)&p->ainsn.insn[0]; + else if (insn_has_delayslot(p->opcode)) { + ret = evaluate_branch_instruction(p, regs, kcb); + if (ret < 0) { + pr_notice("Kprobes: Error in evaluating branch\n"); + return; + } + } + regs->cp0_epc = (unsigned long)&p->ainsn.insn[0]; +} + +/* + * Called after single-stepping. p->addr is the address of the + * instruction whose first byte has been replaced by the "break 0" + * instruction. To avoid the SMP problems that can occur when we + * temporarily put back the original opcode to single-step, we + * single-stepped a copy of the instruction. The address of this + * copy is p->ainsn.insn. + * + * This function prepares to return from the post-single-step + * breakpoint trap. In case of branch instructions, the target + * epc to be restored. + */ +static void __kprobes resume_execution(struct kprobe *p, + struct pt_regs *regs, + struct kprobe_ctlblk *kcb) +{ + if (insn_has_delayslot(p->opcode)) + regs->cp0_epc = kcb->target_epc; + else { + unsigned long orig_epc = kcb->kprobe_saved_epc; + regs->cp0_epc = orig_epc + 4; + } } static int __kprobes kprobe_handler(struct pt_regs *regs) @@ -239,8 +364,13 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) save_previous_kprobe(kcb); set_current_kprobe(p, regs, kcb); kprobes_inc_nmissed_count(p); - prepare_singlestep(p, regs); + prepare_singlestep(p, regs, kcb); kcb->kprobe_status = KPROBE_REENTER; + if (kcb->flags & SKIP_DELAYSLOT) { + resume_execution(p, regs, kcb); + restore_previous_kprobe(kcb); + preempt_enable_no_resched(); + } return 1; } else { if (addr->word != breakpoint_insn.word) { @@ -284,8 +414,16 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) } ss_probe: - prepare_singlestep(p, regs); - kcb->kprobe_status = KPROBE_HIT_SS; + prepare_singlestep(p, regs, kcb); + if (kcb->flags & SKIP_DELAYSLOT) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + if (p->post_handler) + p->post_handler(p, regs, 0); + resume_execution(p, regs, kcb); + preempt_enable_no_resched(); + } else + kcb->kprobe_status = KPROBE_HIT_SS; + return 1; no_kprobe: @@ -294,25 +432,6 @@ no_kprobe: } -/* - * Called after single-stepping. p->addr is the address of the - * instruction whose first byte has been replaced by the "break 0" - * instruction. To avoid the SMP problems that can occur when we - * temporarily put back the original opcode to single-step, we - * single-stepped a copy of the instruction. The address of this - * copy is p->ainsn.insn. - * - * This function prepares to return from the post-single-step - * breakpoint trap. - */ -static void __kprobes resume_execution(struct kprobe *p, - struct pt_regs *regs, - struct kprobe_ctlblk *kcb) -{ - unsigned long orig_epc = kcb->kprobe_saved_epc; - regs->cp0_epc = orig_epc + 4; -} - static inline int post_kprobe_handler(struct pt_regs *regs) { struct kprobe *cur = kprobe_running(); diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c index 315fc0b250f..e3b897acfbc 100644 --- a/arch/mips/kernel/perf_event_mipsxx.c +++ b/arch/mips/kernel/perf_event_mipsxx.c @@ -621,11 +621,6 @@ static int mipspmu_event_init(struct perf_event *event) return -ENODEV; if (!atomic_inc_not_zero(&active_events)) { - if (atomic_read(&active_events) > MIPS_MAX_HWEVENTS) { - atomic_dec(&active_events); - return -EINVAL; - } - mutex_lock(&pmu_reserve_mutex); if (atomic_read(&active_events) == 0) err = mipspmu_get_irq(); @@ -638,11 +633,7 @@ static int mipspmu_event_init(struct perf_event *event) if (err) return err; - err = __hw_perf_event_init(event); - if (err) - hw_perf_event_destroy(event); - - return err; + return __hw_perf_event_init(event); } static struct pmu pmu = { @@ -712,18 +703,6 @@ static const struct mips_perf_event *mipspmu_map_cache_event(u64 config) } -static int validate_event(struct cpu_hw_events *cpuc, - struct perf_event *event) -{ - struct hw_perf_event fake_hwc = event->hw; - - /* Allow mixed event group. So return 1 to pass validation. */ - if (event->pmu != &pmu || event->state <= PERF_EVENT_STATE_OFF) - return 1; - - return mipsxx_pmu_alloc_counter(cpuc, &fake_hwc) >= 0; -} - static int validate_group(struct perf_event *event) { struct perf_event *sibling, *leader = event->group_leader; @@ -731,15 +710,15 @@ static int validate_group(struct perf_event *event) memset(&fake_cpuc, 0, sizeof(fake_cpuc)); - if (!validate_event(&fake_cpuc, leader)) + if (mipsxx_pmu_alloc_counter(&fake_cpuc, &leader->hw) < 0) return -EINVAL; list_for_each_entry(sibling, &leader->sibling_list, group_entry) { - if (!validate_event(&fake_cpuc, sibling)) + if (mipsxx_pmu_alloc_counter(&fake_cpuc, &sibling->hw) < 0) return -EINVAL; } - if (!validate_event(&fake_cpuc, event)) + if (mipsxx_pmu_alloc_counter(&fake_cpuc, &event->hw) < 0) return -EINVAL; return 0; @@ -1279,13 +1258,14 @@ static int __hw_perf_event_init(struct perf_event *event) } err = 0; - if (event->group_leader != event) { + if (event->group_leader != event) err = validate_group(event); - if (err) - return -EINVAL; - } event->destroy = hw_perf_event_destroy; + + if (err) + event->destroy(event); + return err; } @@ -1380,20 +1360,10 @@ static irqreturn_t mipsxx_pmu_handle_irq(int irq, void *dev) } /* 24K */ -#define IS_UNSUPPORTED_24K_EVENT(r, b) \ - ((b) == 12 || (r) == 151 || (r) == 152 || (b) == 26 || \ - (b) == 27 || (r) == 28 || (r) == 158 || (b) == 31 || \ - (b) == 32 || (b) == 34 || (b) == 36 || (r) == 168 || \ - (r) == 172 || (b) == 47 || ((b) >= 56 && (b) <= 63) || \ - ((b) >= 68 && (b) <= 127)) #define IS_BOTH_COUNTERS_24K_EVENT(b) \ ((b) == 0 || (b) == 1 || (b) == 11) /* 34K */ -#define IS_UNSUPPORTED_34K_EVENT(r, b) \ - ((b) == 12 || (r) == 27 || (r) == 158 || (b) == 36 || \ - (b) == 38 || (r) == 175 || ((b) >= 56 && (b) <= 63) || \ - ((b) >= 68 && (b) <= 127)) #define IS_BOTH_COUNTERS_34K_EVENT(b) \ ((b) == 0 || (b) == 1 || (b) == 11) #ifdef CONFIG_MIPS_MT_SMP @@ -1406,20 +1376,10 @@ static irqreturn_t mipsxx_pmu_handle_irq(int irq, void *dev) #endif /* 74K */ -#define IS_UNSUPPORTED_74K_EVENT(r, b) \ - ((r) == 5 || ((r) >= 135 && (r) <= 137) || \ - ((b) >= 10 && (b) <= 12) || (b) == 22 || (b) == 27 || \ - (b) == 33 || (b) == 34 || ((b) >= 47 && (b) <= 49) || \ - (r) == 178 || (b) == 55 || (b) == 57 || (b) == 60 || \ - (b) == 61 || (r) == 62 || (r) == 191 || \ - ((b) >= 64 && (b) <= 127)) #define IS_BOTH_COUNTERS_74K_EVENT(b) \ ((b) == 0 || (b) == 1) /* 1004K */ -#define IS_UNSUPPORTED_1004K_EVENT(r, b) \ - ((b) == 12 || (r) == 27 || (r) == 158 || (b) == 38 || \ - (r) == 175 || (b) == 63 || ((b) >= 68 && (b) <= 127)) #define IS_BOTH_COUNTERS_1004K_EVENT(b) \ ((b) == 0 || (b) == 1 || (b) == 11) #ifdef CONFIG_MIPS_MT_SMP @@ -1445,11 +1405,10 @@ static const struct mips_perf_event *mipsxx_pmu_map_raw_event(u64 config) unsigned int raw_id = config & 0xff; unsigned int base_id = raw_id & 0x7f; + raw_event.event_id = base_id; + switch (current_cpu_type()) { case CPU_24K: - if (IS_UNSUPPORTED_24K_EVENT(raw_id, base_id)) - return ERR_PTR(-EOPNOTSUPP); - raw_event.event_id = base_id; if (IS_BOTH_COUNTERS_24K_EVENT(base_id)) raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD; else @@ -1464,9 +1423,6 @@ static const struct mips_perf_event *mipsxx_pmu_map_raw_event(u64 config) #endif break; case CPU_34K: - if (IS_UNSUPPORTED_34K_EVENT(raw_id, base_id)) - return ERR_PTR(-EOPNOTSUPP); - raw_event.event_id = base_id; if (IS_BOTH_COUNTERS_34K_EVENT(base_id)) raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD; else @@ -1482,9 +1438,6 @@ static const struct mips_perf_event *mipsxx_pmu_map_raw_event(u64 config) #endif break; case CPU_74K: - if (IS_UNSUPPORTED_74K_EVENT(raw_id, base_id)) - return ERR_PTR(-EOPNOTSUPP); - raw_event.event_id = base_id; if (IS_BOTH_COUNTERS_74K_EVENT(base_id)) raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD; else @@ -1495,9 +1448,6 @@ static const struct mips_perf_event *mipsxx_pmu_map_raw_event(u64 config) #endif break; case CPU_1004K: - if (IS_UNSUPPORTED_1004K_EVENT(raw_id, base_id)) - return ERR_PTR(-EOPNOTSUPP); - raw_event.event_id = base_id; if (IS_BOTH_COUNTERS_1004K_EVENT(base_id)) raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD; else diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c index 4e6ea1ffad4..7786b608d93 100644 --- a/arch/mips/kernel/ptrace.c +++ b/arch/mips/kernel/ptrace.c @@ -560,10 +560,9 @@ asmlinkage void syscall_trace_enter(struct pt_regs *regs) } out: - if (unlikely(current->audit_context)) - audit_syscall_entry(audit_arch(), regs->regs[2], - regs->regs[4], regs->regs[5], - regs->regs[6], regs->regs[7]); + audit_syscall_entry(audit_arch(), regs->regs[2], + regs->regs[4], regs->regs[5], + regs->regs[6], regs->regs[7]); } /* @@ -572,9 +571,7 @@ out: */ asmlinkage void syscall_trace_leave(struct pt_regs *regs) { - if (unlikely(current->audit_context)) - audit_syscall_exit(AUDITSC_RESULT(regs->regs[7]), - -regs->regs[2]); + audit_syscall_exit(regs); if (!(current->ptrace & PT_PTRACED)) return; diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c index 933166f44a6..a9d801dec6b 100644 --- a/arch/mips/kernel/rtlx.c +++ b/arch/mips/kernel/rtlx.c @@ -473,7 +473,6 @@ static const struct file_operations rtlx_fops = { static struct irqaction rtlx_irq = { .handler = rtlx_interrupt, - .flags = IRQF_DISABLED, .name = "RTLX", }; diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index b1cb8f87d7b..058e964e730 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -122,6 +122,9 @@ static void __init print_memory_map(void) case BOOT_MEM_RAM: printk(KERN_CONT "(usable)\n"); break; + case BOOT_MEM_INIT_RAM: + printk(KERN_CONT "(usable after init)\n"); + break; case BOOT_MEM_ROM_DATA: printk(KERN_CONT "(ROM data)\n"); break; @@ -362,15 +365,24 @@ static void __init bootmem_init(void) for (i = 0; i < boot_mem_map.nr_map; i++) { unsigned long start, end, size; + start = PFN_UP(boot_mem_map.map[i].addr); + end = PFN_DOWN(boot_mem_map.map[i].addr + + boot_mem_map.map[i].size); + /* * Reserve usable memory. */ - if (boot_mem_map.map[i].type != BOOT_MEM_RAM) + switch (boot_mem_map.map[i].type) { + case BOOT_MEM_RAM: + break; + case BOOT_MEM_INIT_RAM: + memory_present(0, start, end); continue; + default: + /* Not usable memory */ + continue; + } - start = PFN_UP(boot_mem_map.map[i].addr); - end = PFN_DOWN(boot_mem_map.map[i].addr - + boot_mem_map.map[i].size); /* * We are rounding up the start address of usable memory * and at the end of the usable range downwards. @@ -456,11 +468,33 @@ early_param("mem", early_parse_mem); static void __init arch_mem_init(char **cmdline_p) { + phys_t init_mem, init_end, init_size; + extern void plat_mem_setup(void); /* call board setup routine */ plat_mem_setup(); + init_mem = PFN_UP(__pa_symbol(&__init_begin)) << PAGE_SHIFT; + init_end = PFN_DOWN(__pa_symbol(&__init_end)) << PAGE_SHIFT; + init_size = init_end - init_mem; + if (init_size) { + /* Make sure it is in the boot_mem_map */ + int i, found; + found = 0; + for (i = 0; i < boot_mem_map.nr_map; i++) { + if (init_mem >= boot_mem_map.map[i].addr && + init_mem < (boot_mem_map.map[i].addr + + boot_mem_map.map[i].size)) { + found = 1; + break; + } + } + if (!found) + add_memory_region(init_mem, init_size, + BOOT_MEM_INIT_RAM); + } + pr_info("Determined physical RAM map:\n"); print_memory_map(); @@ -524,6 +558,7 @@ static void __init resource_init(void) res = alloc_bootmem(sizeof(struct resource)); switch (boot_mem_map.map[i].type) { case BOOT_MEM_RAM: + case BOOT_MEM_INIT_RAM: case BOOT_MEM_ROM_DATA: res->name = "System RAM"; break; diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c new file mode 100644 index 00000000000..58fe71afd87 --- /dev/null +++ b/arch/mips/kernel/smp-bmips.c @@ -0,0 +1,458 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2011 by Kevin Cernekee (cernekee@gmail.com) + * + * SMP support for BMIPS + */ + +#include <linux/version.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/delay.h> +#include <linux/smp.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/init.h> +#include <linux/cpu.h> +#include <linux/cpumask.h> +#include <linux/reboot.h> +#include <linux/io.h> +#include <linux/compiler.h> +#include <linux/linkage.h> +#include <linux/bug.h> +#include <linux/kernel.h> + +#include <asm/time.h> +#include <asm/pgtable.h> +#include <asm/processor.h> +#include <asm/system.h> +#include <asm/bootinfo.h> +#include <asm/pmon.h> +#include <asm/cacheflush.h> +#include <asm/tlbflush.h> +#include <asm/mipsregs.h> +#include <asm/bmips.h> +#include <asm/traps.h> +#include <asm/barrier.h> + +static int __maybe_unused max_cpus = 1; + +/* these may be configured by the platform code */ +int bmips_smp_enabled = 1; +int bmips_cpu_offset; +cpumask_t bmips_booted_mask; + +#ifdef CONFIG_SMP + +/* initial $sp, $gp - used by arch/mips/kernel/bmips_vec.S */ +unsigned long bmips_smp_boot_sp; +unsigned long bmips_smp_boot_gp; + +static void bmips_send_ipi_single(int cpu, unsigned int action); +static irqreturn_t bmips_ipi_interrupt(int irq, void *dev_id); + +/* SW interrupts 0,1 are used for interprocessor signaling */ +#define IPI0_IRQ (MIPS_CPU_IRQ_BASE + 0) +#define IPI1_IRQ (MIPS_CPU_IRQ_BASE + 1) + +#define CPUNUM(cpu, shift) (((cpu) + bmips_cpu_offset) << (shift)) +#define ACTION_CLR_IPI(cpu, ipi) (0x2000 | CPUNUM(cpu, 9) | ((ipi) << 8)) +#define ACTION_SET_IPI(cpu, ipi) (0x3000 | CPUNUM(cpu, 9) | ((ipi) << 8)) +#define ACTION_BOOT_THREAD(cpu) (0x08 | CPUNUM(cpu, 0)) + +static void __init bmips_smp_setup(void) +{ + int i; + +#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380) + /* arbitration priority */ + clear_c0_brcm_cmt_ctrl(0x30); + + /* NBK and weak order flags */ + set_c0_brcm_config_0(0x30000); + + /* + * MIPS interrupts 0,1 (SW INT 0,1) cross over to the other thread + * MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output + * MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output + */ + change_c0_brcm_cmt_intr(0xf8018000, + (0x02 << 27) | (0x03 << 15)); + + /* single core, 2 threads (2 pipelines) */ + max_cpus = 2; +#elif defined(CONFIG_CPU_BMIPS5000) + /* enable raceless SW interrupts */ + set_c0_brcm_config(0x03 << 22); + + /* route HW interrupt 0 to CPU0, HW interrupt 1 to CPU1 */ + change_c0_brcm_mode(0x1f << 27, 0x02 << 27); + + /* N cores, 2 threads per core */ + max_cpus = (((read_c0_brcm_config() >> 6) & 0x03) + 1) << 1; + + /* clear any pending SW interrupts */ + for (i = 0; i < max_cpus; i++) { + write_c0_brcm_action(ACTION_CLR_IPI(i, 0)); + write_c0_brcm_action(ACTION_CLR_IPI(i, 1)); + } +#endif + + if (!bmips_smp_enabled) + max_cpus = 1; + + /* this can be overridden by the BSP */ + if (!board_ebase_setup) + board_ebase_setup = &bmips_ebase_setup; + + for (i = 0; i < max_cpus; i++) { + __cpu_number_map[i] = 1; + __cpu_logical_map[i] = 1; + set_cpu_possible(i, 1); + set_cpu_present(i, 1); + } +} + +/* + * IPI IRQ setup - runs on CPU0 + */ +static void bmips_prepare_cpus(unsigned int max_cpus) +{ + if (request_irq(IPI0_IRQ, bmips_ipi_interrupt, IRQF_PERCPU, + "smp_ipi0", NULL)) + panic("Can't request IPI0 interrupt\n"); + if (request_irq(IPI1_IRQ, bmips_ipi_interrupt, IRQF_PERCPU, + "smp_ipi1", NULL)) + panic("Can't request IPI1 interrupt\n"); +} + +/* + * Tell the hardware to boot CPUx - runs on CPU0 + */ +static void bmips_boot_secondary(int cpu, struct task_struct *idle) +{ + bmips_smp_boot_sp = __KSTK_TOS(idle); + bmips_smp_boot_gp = (unsigned long)task_thread_info(idle); + mb(); + + /* + * Initial boot sequence for secondary CPU: + * bmips_reset_nmi_vec @ a000_0000 -> + * bmips_smp_entry -> + * plat_wired_tlb_setup (cached function call; optional) -> + * start_secondary (cached jump) + * + * Warm restart sequence: + * play_dead WAIT loop -> + * bmips_smp_int_vec @ BMIPS_WARM_RESTART_VEC -> + * eret to play_dead -> + * bmips_secondary_reentry -> + * start_secondary + */ + + pr_info("SMP: Booting CPU%d...\n", cpu); + + if (cpumask_test_cpu(cpu, &bmips_booted_mask)) + bmips_send_ipi_single(cpu, 0); + else { +#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380) + set_c0_brcm_cmt_ctrl(0x01); +#elif defined(CONFIG_CPU_BMIPS5000) + if (cpu & 0x01) + write_c0_brcm_action(ACTION_BOOT_THREAD(cpu)); + else { + /* + * core N thread 0 was already booted; just + * pulse the NMI line + */ + bmips_write_zscm_reg(0x210, 0xc0000000); + udelay(10); + bmips_write_zscm_reg(0x210, 0x00); + } +#endif + cpumask_set_cpu(cpu, &bmips_booted_mask); + } +} + +/* + * Early setup - runs on secondary CPU after cache probe + */ +static void bmips_init_secondary(void) +{ + /* move NMI vector to kseg0, in case XKS01 is enabled */ + +#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380) + void __iomem *cbr = BMIPS_GET_CBR(); + unsigned long old_vec; + + old_vec = __raw_readl(cbr + BMIPS_RELO_VECTOR_CONTROL_1); + __raw_writel(old_vec & ~0x20000000, cbr + BMIPS_RELO_VECTOR_CONTROL_1); + + clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0); +#elif defined(CONFIG_CPU_BMIPS5000) + write_c0_brcm_bootvec(read_c0_brcm_bootvec() & + (smp_processor_id() & 0x01 ? ~0x20000000 : ~0x2000)); + + write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0)); +#endif + + /* make sure there won't be a timer interrupt for a little while */ + write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ); + + irq_enable_hazard(); + set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ1 | IE_IRQ5 | ST0_IE); + irq_enable_hazard(); +} + +/* + * Late setup - runs on secondary CPU before entering the idle loop + */ +static void bmips_smp_finish(void) +{ + pr_info("SMP: CPU%d is running\n", smp_processor_id()); +} + +/* + * Runs on CPU0 after all CPUs have been booted + */ +static void bmips_cpus_done(void) +{ +} + +#if defined(CONFIG_CPU_BMIPS5000) + +/* + * BMIPS5000 raceless IPIs + * + * Each CPU has two inbound SW IRQs which are independent of all other CPUs. + * IPI0 is used for SMP_RESCHEDULE_YOURSELF + * IPI1 is used for SMP_CALL_FUNCTION + */ + +static void bmips_send_ipi_single(int cpu, unsigned int action) +{ + write_c0_brcm_action(ACTION_SET_IPI(cpu, action == SMP_CALL_FUNCTION)); +} + +static irqreturn_t bmips_ipi_interrupt(int irq, void *dev_id) +{ + int action = irq - IPI0_IRQ; + + write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), action)); + + if (action == 0) + scheduler_ipi(); + else + smp_call_function_interrupt(); + + return IRQ_HANDLED; +} + +#else + +/* + * BMIPS43xx racey IPIs + * + * We use one inbound SW IRQ for each CPU. + * + * A spinlock must be held in order to keep CPUx from accidentally clearing + * an incoming IPI when it writes CP0 CAUSE to raise an IPI on CPUy. The + * same spinlock is used to protect the action masks. + */ + +static DEFINE_SPINLOCK(ipi_lock); +static DEFINE_PER_CPU(int, ipi_action_mask); + +static void bmips_send_ipi_single(int cpu, unsigned int action) +{ + unsigned long flags; + + spin_lock_irqsave(&ipi_lock, flags); + set_c0_cause(cpu ? C_SW1 : C_SW0); + per_cpu(ipi_action_mask, cpu) |= action; + irq_enable_hazard(); + spin_unlock_irqrestore(&ipi_lock, flags); +} + +static irqreturn_t bmips_ipi_interrupt(int irq, void *dev_id) +{ + unsigned long flags; + int action, cpu = irq - IPI0_IRQ; + + spin_lock_irqsave(&ipi_lock, flags); + action = __get_cpu_var(ipi_action_mask); + per_cpu(ipi_action_mask, cpu) = 0; + clear_c0_cause(cpu ? C_SW1 : C_SW0); + spin_unlock_irqrestore(&ipi_lock, flags); + + if (action & SMP_RESCHEDULE_YOURSELF) + scheduler_ipi(); + if (action & SMP_CALL_FUNCTION) + smp_call_function_interrupt(); + + return IRQ_HANDLED; +} + +#endif /* BMIPS type */ + +static void bmips_send_ipi_mask(const struct cpumask *mask, + unsigned int action) +{ + unsigned int i; + + for_each_cpu(i, mask) + bmips_send_ipi_single(i, action); +} + +#ifdef CONFIG_HOTPLUG_CPU + +static int bmips_cpu_disable(void) +{ + unsigned int cpu = smp_processor_id(); + + if (cpu == 0) + return -EBUSY; + + pr_info("SMP: CPU%d is offline\n", cpu); + + cpu_clear(cpu, cpu_online_map); + cpu_clear(cpu, cpu_callin_map); + + local_flush_tlb_all(); + local_flush_icache_range(0, ~0); + + return 0; +} + +static void bmips_cpu_die(unsigned int cpu) +{ +} + +void __ref play_dead(void) +{ + idle_task_exit(); + + /* flush data cache */ + _dma_cache_wback_inv(0, ~0); + + /* + * Wakeup is on SW0 or SW1; disable everything else + * Use BEV !IV (BMIPS_WARM_RESTART_VEC) to avoid the regular Linux + * IRQ handlers; this clears ST0_IE and returns immediately. + */ + clear_c0_cause(CAUSEF_IV | C_SW0 | C_SW1); + change_c0_status(IE_IRQ5 | IE_IRQ1 | IE_SW0 | IE_SW1 | ST0_IE | ST0_BEV, + IE_SW0 | IE_SW1 | ST0_IE | ST0_BEV); + irq_disable_hazard(); + + /* + * wait for SW interrupt from bmips_boot_secondary(), then jump + * back to start_secondary() + */ + __asm__ __volatile__( + " wait\n" + " j bmips_secondary_reentry\n" + : : : "memory"); +} + +#endif /* CONFIG_HOTPLUG_CPU */ + +struct plat_smp_ops bmips_smp_ops = { + .smp_setup = bmips_smp_setup, + .prepare_cpus = bmips_prepare_cpus, + .boot_secondary = bmips_boot_secondary, + .smp_finish = bmips_smp_finish, + .init_secondary = bmips_init_secondary, + .cpus_done = bmips_cpus_done, + .send_ipi_single = bmips_send_ipi_single, + .send_ipi_mask = bmips_send_ipi_mask, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_disable = bmips_cpu_disable, + .cpu_die = bmips_cpu_die, +#endif +}; + +#endif /* CONFIG_SMP */ + +/*********************************************************************** + * BMIPS vector relocation + * This is primarily used for SMP boot, but it is applicable to some + * UP BMIPS systems as well. + ***********************************************************************/ + +static void __cpuinit bmips_wr_vec(unsigned long dst, char *start, char *end) +{ + memcpy((void *)dst, start, end - start); + dma_cache_wback((unsigned long)start, end - start); + local_flush_icache_range(dst, dst + (end - start)); + instruction_hazard(); +} + +static inline void __cpuinit bmips_nmi_handler_setup(void) +{ + bmips_wr_vec(BMIPS_NMI_RESET_VEC, &bmips_reset_nmi_vec, + &bmips_reset_nmi_vec_end); + bmips_wr_vec(BMIPS_WARM_RESTART_VEC, &bmips_smp_int_vec, + &bmips_smp_int_vec_end); +} + +void __cpuinit bmips_ebase_setup(void) +{ + unsigned long new_ebase = ebase; + void __iomem __maybe_unused *cbr; + + BUG_ON(ebase != CKSEG0); + +#if defined(CONFIG_CPU_BMIPS4350) + /* + * BMIPS4350 cannot relocate the normal vectors, but it + * can relocate the BEV=1 vectors. So CPU1 starts up at + * the relocated BEV=1, IV=0 general exception vector @ + * 0xa000_0380. + * + * set_uncached_handler() is used here because: + * - CPU1 will run this from uncached space + * - None of the cacheflush functions are set up yet + */ + set_uncached_handler(BMIPS_WARM_RESTART_VEC - CKSEG0, + &bmips_smp_int_vec, 0x80); + __sync(); + return; +#elif defined(CONFIG_CPU_BMIPS4380) + /* + * 0x8000_0000: reset/NMI (initially in kseg1) + * 0x8000_0400: normal vectors + */ + new_ebase = 0x80000400; + cbr = BMIPS_GET_CBR(); + __raw_writel(0x80080800, cbr + BMIPS_RELO_VECTOR_CONTROL_0); + __raw_writel(0xa0080800, cbr + BMIPS_RELO_VECTOR_CONTROL_1); +#elif defined(CONFIG_CPU_BMIPS5000) + /* + * 0x8000_0000: reset/NMI (initially in kseg1) + * 0x8000_1000: normal vectors + */ + new_ebase = 0x80001000; + write_c0_brcm_bootvec(0xa0088008); + write_c0_ebase(new_ebase); + if (max_cpus > 2) + bmips_write_zscm_reg(0xa0, 0xa008a008); +#else + return; +#endif + board_nmi_handler_setup = &bmips_nmi_handler_setup; + ebase = new_ebase; +} + +asmlinkage void __weak plat_wired_tlb_setup(void) +{ + /* + * Called when starting/restarting a secondary CPU. + * Kernel stacks and other important data might only be accessible + * once the wired entries are present. + */ +} diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index f0895e70e28..0a42ff3ff6a 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -559,7 +559,7 @@ void smtc_prepare_cpus(int cpus) pipi = kmalloc(nipi *sizeof(struct smtc_ipi), GFP_KERNEL); if (pipi == NULL) - panic("kmalloc of IPI message buffers failed\n"); + panic("kmalloc of IPI message buffers failed"); else printk("IPI buffer pool of %d buffers\n", nipi); for (i = 0; i < nipi; i++) { @@ -813,7 +813,7 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) if (pipi == NULL) { bust_spinlocks(1); mips_mt_regdump(dvpe()); - panic("IPI Msg. Buffers Depleted\n"); + panic("IPI Msg. Buffers Depleted"); } pipi->type = type; pipi->arg = (void *)action; @@ -1130,7 +1130,7 @@ static void ipi_irq_dispatch(void) static struct irqaction irq_ipi = { .handler = ipi_interrupt, - .flags = IRQF_DISABLED | IRQF_PERCPU, + .flags = IRQF_PERCPU, .name = "SMTC_IPI" }; diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index bbddb86c1fa..cc4a3f120f5 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -91,6 +91,7 @@ int (*board_be_handler)(struct pt_regs *regs, int is_fixup); void (*board_nmi_handler_setup)(void); void (*board_ejtag_handler_setup)(void); void (*board_bind_eic_interrupt)(int irq, int regset); +void (*board_ebase_setup)(void); static void show_raw_backtrace(unsigned long reg29) @@ -400,7 +401,7 @@ void __noreturn die(const char *str, struct pt_regs *regs) panic("Fatal exception in interrupt"); if (panic_on_oops) { - printk(KERN_EMERG "Fatal exception: panic in 5 seconds\n"); + printk(KERN_EMERG "Fatal exception: panic in 5 seconds"); ssleep(5); panic("Fatal exception"); } @@ -1150,7 +1151,7 @@ asmlinkage void do_mt(struct pt_regs *regs) asmlinkage void do_dsp(struct pt_regs *regs) { if (cpu_has_dsp) - panic("Unexpected DSP exception\n"); + panic("Unexpected DSP exception"); force_sig(SIGILL, current); } @@ -1339,9 +1340,18 @@ void ejtag_exception_handler(struct pt_regs *regs) /* * NMI exception handler. + * No lock; only written during early bootup by CPU 0. */ +static RAW_NOTIFIER_HEAD(nmi_chain); + +int register_nmi_notifier(struct notifier_block *nb) +{ + return raw_notifier_chain_register(&nmi_chain, nb); +} + void __noreturn nmi_exception_handler(struct pt_regs *regs) { + raw_notifier_call_chain(&nmi_chain, 0, regs); bust_spinlocks(1); printk("NMI taken!!!!\n"); die("NMI", regs); @@ -1682,6 +1692,8 @@ void __init trap_init(void) ebase += (read_c0_ebase() & 0x3ffff000); } + if (board_ebase_setup) + board_ebase_setup(); per_cpu_trap_init(); /* |