diff options
Diffstat (limited to 'arch/mips/kernel/cpu-probe.c')
| -rw-r--r-- | arch/mips/kernel/cpu-probe.c | 198 |
1 files changed, 0 insertions, 198 deletions
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 4bbffdb9024..c6568bf4b1b 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -27,105 +27,6 @@ #include <asm/spram.h> #include <asm/uaccess.h> -/* - * Not all of the MIPS CPUs have the "wait" instruction available. Moreover, - * the implementation of the "wait" feature differs between CPU families. This - * points to the function that implements CPU specific wait. - * The wait instruction stops the pipeline and reduces the power consumption of - * the CPU very much. - */ -void (*cpu_wait)(void); -EXPORT_SYMBOL(cpu_wait); - -static void r3081_wait(void) -{ - unsigned long cfg = read_c0_conf(); - write_c0_conf(cfg | R30XX_CONF_HALT); -} - -static void r39xx_wait(void) -{ - local_irq_disable(); - if (!need_resched()) - write_c0_conf(read_c0_conf() | TX39_CONF_HALT); - local_irq_enable(); -} - -extern void r4k_wait(void); - -/* - * This variant is preferable as it allows testing need_resched and going to - * sleep depending on the outcome atomically. Unfortunately the "It is - * implementation-dependent whether the pipeline restarts when a non-enabled - * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes - * using this version a gamble. - */ -void r4k_wait_irqoff(void) -{ - local_irq_disable(); - if (!need_resched()) - __asm__(" .set push \n" - " .set mips3 \n" - " wait \n" - " .set pop \n"); - local_irq_enable(); - __asm__(" .globl __pastwait \n" - "__pastwait: \n"); -} - -/* - * The RM7000 variant has to handle erratum 38. The workaround is to not - * have any pending stores when the WAIT instruction is executed. - */ -static void rm7k_wait_irqoff(void) -{ - local_irq_disable(); - if (!need_resched()) - __asm__( - " .set push \n" - " .set mips3 \n" - " .set noat \n" - " mfc0 $1, $12 \n" - " sync \n" - " mtc0 $1, $12 # stalls until W stage \n" - " wait \n" - " mtc0 $1, $12 # stalls until W stage \n" - " .set pop \n"); - local_irq_enable(); -} - -/* - * The Au1xxx wait is available only if using 32khz counter or - * external timer source, but specifically not CP0 Counter. - * alchemy/common/time.c may override cpu_wait! - */ -static void au1k_wait(void) -{ - __asm__(" .set mips3 \n" - " cache 0x14, 0(%0) \n" - " cache 0x14, 32(%0) \n" - " sync \n" - " nop \n" - " wait \n" - " nop \n" - " nop \n" - " nop \n" - " nop \n" - " .set mips0 \n" - : : "r" (au1k_wait)); -} - -static int __initdata nowait; - -static int __init wait_disable(char *s) -{ - nowait = 1; - - return 1; -} - -__setup("nowait", wait_disable); - static int __cpuinitdata mips_fpu_disabled; static int __init fpu_disable(char *s) @@ -150,105 +51,6 @@ static int __init dsp_disable(char *s) __setup("nodsp", dsp_disable); -void __init check_wait(void) -{ - struct cpuinfo_mips *c = ¤t_cpu_data; - - if (nowait) { - printk("Wait instruction disabled.\n"); - return; - } - - switch (c->cputype) { - case CPU_R3081: - case CPU_R3081E: - cpu_wait = r3081_wait; - break; - case CPU_TX3927: - cpu_wait = r39xx_wait; - break; - case CPU_R4200: -/* case CPU_R4300: */ - case CPU_R4600: - case CPU_R4640: - case CPU_R4650: - case CPU_R4700: - case CPU_R5000: - case CPU_R5500: - case CPU_NEVADA: - case CPU_4KC: - case CPU_4KEC: - case CPU_4KSC: - case CPU_5KC: - case CPU_25KF: - case CPU_PR4450: - case CPU_BMIPS3300: - case CPU_BMIPS4350: - case CPU_BMIPS4380: - case CPU_BMIPS5000: - case CPU_CAVIUM_OCTEON: - case CPU_CAVIUM_OCTEON_PLUS: - case CPU_CAVIUM_OCTEON2: - case CPU_JZRISC: - case CPU_LOONGSON1: - case CPU_XLR: - case CPU_XLP: - cpu_wait = r4k_wait; - break; - - case CPU_RM7000: - cpu_wait = rm7k_wait_irqoff; - break; - - case CPU_M14KC: - case CPU_M14KEC: - case CPU_24K: - case CPU_34K: - case CPU_1004K: - cpu_wait = r4k_wait; - if (read_c0_config7() & MIPS_CONF7_WII) - cpu_wait = r4k_wait_irqoff; - break; - - case CPU_74K: - cpu_wait = r4k_wait; - if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0)) - cpu_wait = r4k_wait_irqoff; - break; - - case CPU_TX49XX: - cpu_wait = r4k_wait_irqoff; - break; - case CPU_ALCHEMY: - cpu_wait = au1k_wait; - break; - case CPU_20KC: - /* - * WAIT on Rev1.0 has E1, E2, E3 and E16. - * WAIT on Rev2.0 and Rev3.0 has E16. - * Rev3.1 WAIT is nop, why bother - */ - if ((c->processor_id & 0xff) <= 0x64) - break; - - /* - * Another rev is incremeting c0_count at a reduced clock - * rate while in WAIT mode. So we basically have the choice - * between using the cp0 timer as clocksource or avoiding - * the WAIT instruction. Until more details are known, - * disable the use of WAIT for 20Kc entirely. - cpu_wait = r4k_wait; - */ - break; - case CPU_RM9000: - if ((c->processor_id & 0x00ff) >= 0x40) - cpu_wait = r4k_wait; - break; - default: - break; - } -} - static inline void check_errata(void) { struct cpuinfo_mips *c = ¤t_cpu_data; |