diff options
Diffstat (limited to 'arch/mips/jz4740/board-qi_lb60.c')
-rw-r--r-- | arch/mips/jz4740/board-qi_lb60.c | 471 |
1 files changed, 471 insertions, 0 deletions
diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c new file mode 100644 index 00000000000..5742bb4d78f --- /dev/null +++ b/arch/mips/jz4740/board-qi_lb60.c @@ -0,0 +1,471 @@ +/* + * linux/arch/mips/jz4740/board-qi_lb60.c + * + * QI_LB60 board support + * + * Copyright (c) 2009 Qi Hardware inc., + * Author: Xiangfu Liu <xiangfu@qi-hardware.com> + * Copyright 2010, Lars-Petrer Clausen <lars@metafoo.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 or later + * as published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/gpio.h> + +#include <linux/input.h> +#include <linux/gpio_keys.h> +#include <linux/input/matrix_keypad.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi_gpio.h> +#include <linux/power_supply.h> +#include <linux/power/jz4740-battery.h> + +#include <asm/mach-jz4740/jz4740_fb.h> +#include <asm/mach-jz4740/jz4740_mmc.h> +#include <asm/mach-jz4740/jz4740_nand.h> + +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> + +#include <linux/leds_pwm.h> + +#include <asm/mach-jz4740/platform.h> + +#include "clock.h" + +static bool is_avt2; + +/* GPIOs */ +#define QI_LB60_GPIO_SD_CD JZ_GPIO_PORTD(0) +#define QI_LB60_GPIO_SD_VCC_EN_N JZ_GPIO_PORTD(2) + +#define QI_LB60_GPIO_KEYOUT(x) (JZ_GPIO_PORTC(10) + (x)) +#define QI_LB60_GPIO_KEYIN(x) (JZ_GPIO_PORTD(18) + (x)) +#define QI_LB60_GPIO_KEYIN8 JZ_GPIO_PORTD(26) + +/* NAND */ +static struct nand_ecclayout qi_lb60_ecclayout_1gb = { +/* .eccbytes = 36, + .eccpos = { + 6, 7, 8, 9, 10, 11, 12, 13, + 14, 15, 16, 17, 18, 19, 20, 21, + 22, 23, 24, 25, 26, 27, 28, 29, + 30, 31, 32, 33, 34, 35, 36, 37, + 38, 39, 40, 41 + },*/ + .oobfree = { + { .offset = 2, .length = 4 }, + { .offset = 42, .length = 22 } + }, +}; + +/* Early prototypes of the QI LB60 had only 1GB of NAND. + * In order to support these devices aswell the partition and ecc layout is + * initalized depending on the NAND size */ +static struct mtd_partition qi_lb60_partitions_1gb[] = { + { + .name = "NAND BOOT partition", + .offset = 0 * 0x100000, + .size = 4 * 0x100000, + }, + { + .name = "NAND KERNEL partition", + .offset = 4 * 0x100000, + .size = 4 * 0x100000, + }, + { + .name = "NAND ROOTFS partition", + .offset = 8 * 0x100000, + .size = (504 + 512) * 0x100000, + }, +}; + +static struct nand_ecclayout qi_lb60_ecclayout_2gb = { +/* .eccbytes = 72, + .eccpos = { + 12, 13, 14, 15, 16, 17, 18, 19, + 20, 21, 22, 23, 24, 25, 26, 27, + 28, 29, 30, 31, 32, 33, 34, 35, + 36, 37, 38, 39, 40, 41, 42, 43, + 44, 45, 46, 47, 48, 49, 50, 51, + 52, 53, 54, 55, 56, 57, 58, 59, + 60, 61, 62, 63, 64, 65, 66, 67, + 68, 69, 70, 71, 72, 73, 74, 75, + 76, 77, 78, 79, 80, 81, 82, 83 + },*/ + .oobfree = { + { .offset = 2, .length = 10 }, + { .offset = 84, .length = 44 }, + }, +}; + +static struct mtd_partition qi_lb60_partitions_2gb[] = { + { + .name = "NAND BOOT partition", + .offset = 0 * 0x100000, + .size = 4 * 0x100000, + }, + { + .name = "NAND KERNEL partition", + .offset = 4 * 0x100000, + .size = 4 * 0x100000, + }, + { + .name = "NAND ROOTFS partition", + .offset = 8 * 0x100000, + .size = (504 + 512 + 1024) * 0x100000, + }, +}; + +static void qi_lb60_nand_ident(struct platform_device *pdev, + struct nand_chip *chip, struct mtd_partition **partitions, + int *num_partitions) +{ + if (chip->page_shift == 12) { + chip->ecc.layout = &qi_lb60_ecclayout_2gb; + *partitions = qi_lb60_partitions_2gb; + *num_partitions = ARRAY_SIZE(qi_lb60_partitions_2gb); + } else { + chip->ecc.layout = &qi_lb60_ecclayout_1gb; + *partitions = qi_lb60_partitions_1gb; + *num_partitions = ARRAY_SIZE(qi_lb60_partitions_1gb); + } +} + +static struct jz_nand_platform_data qi_lb60_nand_pdata = { + .ident_callback = qi_lb60_nand_ident, + .busy_gpio = 94, +}; + +/* Keyboard*/ + +#define KEY_QI_QI KEY_F13 +#define KEY_QI_UPRED KEY_RIGHTALT +#define KEY_QI_VOLUP KEY_VOLUMEUP +#define KEY_QI_VOLDOWN KEY_VOLUMEDOWN +#define KEY_QI_FN KEY_LEFTCTRL + +static const uint32_t qi_lb60_keymap[] = { + KEY(0, 0, KEY_F1), /* S2 */ + KEY(0, 1, KEY_F2), /* S3 */ + KEY(0, 2, KEY_F3), /* S4 */ + KEY(0, 3, KEY_F4), /* S5 */ + KEY(0, 4, KEY_F5), /* S6 */ + KEY(0, 5, KEY_F6), /* S7 */ + KEY(0, 6, KEY_F7), /* S8 */ + + KEY(1, 0, KEY_Q), /* S10 */ + KEY(1, 1, KEY_W), /* S11 */ + KEY(1, 2, KEY_E), /* S12 */ + KEY(1, 3, KEY_R), /* S13 */ + KEY(1, 4, KEY_T), /* S14 */ + KEY(1, 5, KEY_Y), /* S15 */ + KEY(1, 6, KEY_U), /* S16 */ + KEY(1, 7, KEY_I), /* S17 */ + KEY(2, 0, KEY_A), /* S18 */ + KEY(2, 1, KEY_S), /* S19 */ + KEY(2, 2, KEY_D), /* S20 */ + KEY(2, 3, KEY_F), /* S21 */ + KEY(2, 4, KEY_G), /* S22 */ + KEY(2, 5, KEY_H), /* S23 */ + KEY(2, 6, KEY_J), /* S24 */ + KEY(2, 7, KEY_K), /* S25 */ + KEY(3, 0, KEY_ESC), /* S26 */ + KEY(3, 1, KEY_Z), /* S27 */ + KEY(3, 2, KEY_X), /* S28 */ + KEY(3, 3, KEY_C), /* S29 */ + KEY(3, 4, KEY_V), /* S30 */ + KEY(3, 5, KEY_B), /* S31 */ + KEY(3, 6, KEY_N), /* S32 */ + KEY(3, 7, KEY_M), /* S33 */ + KEY(4, 0, KEY_TAB), /* S34 */ + KEY(4, 1, KEY_CAPSLOCK), /* S35 */ + KEY(4, 2, KEY_BACKSLASH), /* S36 */ + KEY(4, 3, KEY_APOSTROPHE), /* S37 */ + KEY(4, 4, KEY_COMMA), /* S38 */ + KEY(4, 5, KEY_DOT), /* S39 */ + KEY(4, 6, KEY_SLASH), /* S40 */ + KEY(4, 7, KEY_UP), /* S41 */ + KEY(5, 0, KEY_O), /* S42 */ + KEY(5, 1, KEY_L), /* S43 */ + KEY(5, 2, KEY_EQUAL), /* S44 */ + KEY(5, 3, KEY_QI_UPRED), /* S45 */ + KEY(5, 4, KEY_SPACE), /* S46 */ + KEY(5, 5, KEY_QI_QI), /* S47 */ + KEY(5, 6, KEY_RIGHTCTRL), /* S48 */ + KEY(5, 7, KEY_LEFT), /* S49 */ + KEY(6, 0, KEY_F8), /* S50 */ + KEY(6, 1, KEY_P), /* S51 */ + KEY(6, 2, KEY_BACKSPACE),/* S52 */ + KEY(6, 3, KEY_ENTER), /* S53 */ + KEY(6, 4, KEY_QI_VOLUP), /* S54 */ + KEY(6, 5, KEY_QI_VOLDOWN), /* S55 */ + KEY(6, 6, KEY_DOWN), /* S56 */ + KEY(6, 7, KEY_RIGHT), /* S57 */ + + KEY(7, 0, KEY_LEFTSHIFT), /* S58 */ + KEY(7, 1, KEY_LEFTALT), /* S59 */ + KEY(7, 2, KEY_QI_FN), /* S60 */ +}; + +static const struct matrix_keymap_data qi_lb60_keymap_data = { + .keymap = qi_lb60_keymap, + .keymap_size = ARRAY_SIZE(qi_lb60_keymap), +}; + +static const unsigned int qi_lb60_keypad_cols[] = { + QI_LB60_GPIO_KEYOUT(0), + QI_LB60_GPIO_KEYOUT(1), + QI_LB60_GPIO_KEYOUT(2), + QI_LB60_GPIO_KEYOUT(3), + QI_LB60_GPIO_KEYOUT(4), + QI_LB60_GPIO_KEYOUT(5), + QI_LB60_GPIO_KEYOUT(6), + QI_LB60_GPIO_KEYOUT(7), +}; + +static const unsigned int qi_lb60_keypad_rows[] = { + QI_LB60_GPIO_KEYIN(0), + QI_LB60_GPIO_KEYIN(1), + QI_LB60_GPIO_KEYIN(2), + QI_LB60_GPIO_KEYIN(3), + QI_LB60_GPIO_KEYIN(4), + QI_LB60_GPIO_KEYIN(5), + QI_LB60_GPIO_KEYIN(7), + QI_LB60_GPIO_KEYIN8, +}; + +static struct matrix_keypad_platform_data qi_lb60_pdata = { + .keymap_data = &qi_lb60_keymap_data, + .col_gpios = qi_lb60_keypad_cols, + .row_gpios = qi_lb60_keypad_rows, + .num_col_gpios = ARRAY_SIZE(qi_lb60_keypad_cols), + .num_row_gpios = ARRAY_SIZE(qi_lb60_keypad_rows), + .col_scan_delay_us = 10, + .debounce_ms = 10, + .wakeup = 1, + .active_low = 1, +}; + +static struct platform_device qi_lb60_keypad = { + .name = "matrix-keypad", + .id = -1, + .dev = { + .platform_data = &qi_lb60_pdata, + }, +}; + +/* Display */ +static struct fb_videomode qi_lb60_video_modes[] = { + { + .name = "320x240", + .xres = 320, + .yres = 240, + .refresh = 30, + .left_margin = 140, + .right_margin = 273, + .upper_margin = 20, + .lower_margin = 2, + .hsync_len = 1, + .vsync_len = 1, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, +}; + +static struct jz4740_fb_platform_data qi_lb60_fb_pdata = { + .width = 60, + .height = 45, + .num_modes = ARRAY_SIZE(qi_lb60_video_modes), + .modes = qi_lb60_video_modes, + .bpp = 24, + .lcd_type = JZ_LCD_TYPE_8BIT_SERIAL, + .pixclk_falling_edge = 1, +}; + +struct spi_gpio_platform_data spigpio_platform_data = { + .sck = JZ_GPIO_PORTC(23), + .mosi = JZ_GPIO_PORTC(22), + .miso = -1, + .num_chipselect = 1, +}; + +static struct platform_device spigpio_device = { + .name = "spi_gpio", + .id = 1, + .dev = { + .platform_data = &spigpio_platform_data, + }, +}; + +static struct spi_board_info qi_lb60_spi_board_info[] = { + { + .modalias = "ili8960", + .controller_data = (void *)JZ_GPIO_PORTC(21), + .chip_select = 0, + .bus_num = 1, + .max_speed_hz = 30 * 1000, + .mode = SPI_3WIRE, + }, +}; + +/* Battery */ +static struct jz_battery_platform_data qi_lb60_battery_pdata = { + .gpio_charge = JZ_GPIO_PORTC(27), + .gpio_charge_active_low = 1, + .info = { + .name = "battery", + .technology = POWER_SUPPLY_TECHNOLOGY_LIPO, + .voltage_max_design = 4200000, + .voltage_min_design = 3600000, + }, +}; + +/* GPIO Key: power */ +static struct gpio_keys_button qi_lb60_gpio_keys_buttons[] = { + [0] = { + .code = KEY_POWER, + .gpio = JZ_GPIO_PORTD(29), + .active_low = 1, + .desc = "Power", + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data qi_lb60_gpio_keys_data = { + .nbuttons = ARRAY_SIZE(qi_lb60_gpio_keys_buttons), + .buttons = qi_lb60_gpio_keys_buttons, +}; + +static struct platform_device qi_lb60_gpio_keys = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &qi_lb60_gpio_keys_data, + } +}; + +static struct jz4740_mmc_platform_data qi_lb60_mmc_pdata = { + .gpio_card_detect = QI_LB60_GPIO_SD_CD, + .gpio_read_only = -1, + .gpio_power = QI_LB60_GPIO_SD_VCC_EN_N, + .power_active_low = 1, +}; + +/* OHCI */ +static struct regulator_consumer_supply avt2_usb_regulator_consumer = + REGULATOR_SUPPLY("vbus", "jz4740-ohci"); + +static struct regulator_init_data avt2_usb_regulator_init_data = { + .num_consumer_supplies = 1, + .consumer_supplies = &avt2_usb_regulator_consumer, + .constraints = { + .name = "USB power", + .min_uV = 5000000, + .max_uV = 5000000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + +static struct fixed_voltage_config avt2_usb_regulator_data = { + .supply_name = "USB power", + .microvolts = 5000000, + .gpio = JZ_GPIO_PORTB(17), + .init_data = &avt2_usb_regulator_init_data, +}; + +static struct platform_device avt2_usb_regulator_device = { + .name = "reg-fixed-voltage", + .id = -1, + .dev = { + .platform_data = &avt2_usb_regulator_data, + } +}; + +/* beeper */ +static struct platform_device qi_lb60_pwm_beeper = { + .name = "pwm-beeper", + .id = -1, + .dev = { + .platform_data = (void *)4, + }, +}; + +static struct platform_device *jz_platform_devices[] __initdata = { + &jz4740_udc_device, + &jz4740_mmc_device, + &jz4740_nand_device, + &qi_lb60_keypad, + &spigpio_device, + &jz4740_framebuffer_device, + &jz4740_pcm_device, + &jz4740_i2s_device, + &jz4740_codec_device, + &jz4740_rtc_device, + &jz4740_adc_device, + &qi_lb60_gpio_keys, + &qi_lb60_pwm_beeper, +}; + +static void __init board_gpio_setup(void) +{ + /* We only need to enable/disable pullup here for pins used in generic + * drivers. Everything else is done by the drivers themselfs. */ + jz_gpio_disable_pullup(QI_LB60_GPIO_SD_VCC_EN_N); + jz_gpio_disable_pullup(QI_LB60_GPIO_SD_CD); +} + +static int __init qi_lb60_init_platform_devices(void) +{ + jz4740_framebuffer_device.dev.platform_data = &qi_lb60_fb_pdata; + jz4740_nand_device.dev.platform_data = &qi_lb60_nand_pdata; + jz4740_adc_device.dev.platform_data = &qi_lb60_battery_pdata; + jz4740_mmc_device.dev.platform_data = &qi_lb60_mmc_pdata; + + jz4740_serial_device_register(); + + spi_register_board_info(qi_lb60_spi_board_info, + ARRAY_SIZE(qi_lb60_spi_board_info)); + + if (is_avt2) { + platform_device_register(&avt2_usb_regulator_device); + platform_device_register(&jz4740_usb_ohci_device); + } + + return platform_add_devices(jz_platform_devices, + ARRAY_SIZE(jz_platform_devices)); + +} + +struct jz4740_clock_board_data jz4740_clock_bdata = { + .ext_rate = 12000000, + .rtc_rate = 32768, +}; + +static __init int board_avt2(char *str) +{ + qi_lb60_mmc_pdata.card_detect_active_low = 1; + is_avt2 = true; + + return 1; +} +__setup("avt2", board_avt2); + +static int __init qi_lb60_board_setup(void) +{ + printk(KERN_INFO "Qi Hardware JZ4740 QI %s setup\n", + is_avt2 ? "AVT2" : "LB60"); + + board_gpio_setup(); + + if (qi_lb60_init_platform_devices()) + panic("Failed to initalize platform devices\n"); + + return 0; +} +arch_initcall(qi_lb60_board_setup); |