1 files changed, 129 insertions, 0 deletions
diff --git a/arch/mips/include/asm/sn/intr.h b/arch/mips/include/asm/sn/intr.h
new file mode 100644
index 00000000000..6718b644b97
--- /dev/null
+++ b/arch/mips/include/asm/sn/intr.h
@@ -0,0 +1,129 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997 Silicon Graphics, Inc.
+ */
+#ifndef __ASM_SN_INTR_H
+#define __ASM_SN_INTR_H
+
+/* Number of interrupt levels associated with each interrupt register. */
+#define N_INTPEND_BITS		64
+
+#define INT_PEND0_BASELVL	0
+#define INT_PEND1_BASELVL	64
+
+#define	N_INTPENDJUNK_BITS	8
+#define	INTPENDJUNK_CLRBIT	0x80
+
+/*
+ * Macros to manipulate the interrupt register on the calling hub chip.
+ */
+
+#define LOCAL_HUB_SEND_INTR(level)				\
+	LOCAL_HUB_S(PI_INT_PEND_MOD, (0x100 | (level)))
+#define REMOTE_HUB_SEND_INTR(hub, level)			\
+	REMOTE_HUB_S((hub), PI_INT_PEND_MOD, (0x100 | (level)))
+
+/*
+ * When clearing the interrupt, make sure this clear does make it
+ * to the hub. Otherwise we could end up losing interrupts.
+ * We do an uncached load of the int_pend0 register to ensure this.
+ */
+
+#define LOCAL_HUB_CLR_INTR(level)	  			\
+do {								\
+	LOCAL_HUB_S(PI_INT_PEND_MOD, (level));			\
+	LOCAL_HUB_L(PI_INT_PEND0);				\
+} while (0);
+
+#define REMOTE_HUB_CLR_INTR(hub, level)				\
+do {								\
+	nasid_t  __hub = (hub);					\
+								\
+	REMOTE_HUB_S(__hub, PI_INT_PEND_MOD, (level));		\
+	REMOTE_HUB_L(__hub, PI_INT_PEND0);			\
+} while (0);
+
+/*
+ * Hard-coded interrupt levels:
+ */
+
+/*
+ *	L0 = SW1
+ *	L1 = SW2
+ *	L2 = INT_PEND0
+ *	L3 = INT_PEND1
+ *	L4 = RTC
+ *	L5 = Profiling Timer
+ *	L6 = Hub Errors
+ *	L7 = Count/Compare (T5 counters)
+ */
+
+
+/*
+ * INT_PEND0 hard-coded bits.
+ */
+
+/*
+ * INT_PEND0 bits determined by hardware:
+ */
+#define RESERVED_INTR		 0	/* What is this bit? */
+#define GFX_INTR_A		 1
+#define GFX_INTR_B		 2
+#define PG_MIG_INTR		 3
+#define UART_INTR		 4
+#define CC_PEND_A		 5
+#define CC_PEND_B		 6
+
+/*
+ * INT_PEND0 used by the kernel for itself ...
+ */
+#define CPU_RESCHED_A_IRQ	 7
+#define CPU_RESCHED_B_IRQ	 8
+#define CPU_CALL_A_IRQ		 9
+#define CPU_CALL_B_IRQ		10
+#define MSC_MESG_INTR		11
+#define BASE_PCI_IRQ		12
+
+/*
+ * INT_PEND0 again, bits determined by hardware / hardcoded:
+ */
+#define SDISK_INTR		63	/* SABLE name */
+#define IP_PEND0_6_63		63	/* What is this bit? */
+
+/*
+ * INT_PEND1 hard-coded bits:
+ */
+#define NI_BRDCAST_ERR_A	39
+#define NI_BRDCAST_ERR_B	40
+
+#define LLP_PFAIL_INTR_A	41	/* see ml/SN/SN0/sysctlr.c */
+#define LLP_PFAIL_INTR_B	42
+
+#define	TLB_INTR_A		43	/* used for tlb flush random */
+#define	TLB_INTR_B		44
+
+#define IP27_INTR_0		45	/* Reserved for PROM use */
+#define IP27_INTR_1		46	/* do not use in Kernel */
+#define IP27_INTR_2		47
+#define IP27_INTR_3		48
+#define IP27_INTR_4		49
+#define IP27_INTR_5		50
+#define IP27_INTR_6		51
+#define IP27_INTR_7		52
+
+#define BRIDGE_ERROR_INTR	53	/* Setup by PROM to catch	*/
+					/* Bridge Errors */
+#define	DEBUG_INTR_A		54
+#define	DEBUG_INTR_B		55	/* Used by symmon to stop all cpus */
+#define IO_ERROR_INTR		57	/* Setup by PROM */
+#define CLK_ERR_INTR		58
+#define COR_ERR_INTR_A		59
+#define COR_ERR_INTR_B		60
+#define MD_COR_ERR_INTR		61
+#define NI_ERROR_INTR		62
+#define MSC_PANIC_INTR		63
+
+#endif /* __ASM_SN_INTR_H */