aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/basler
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/basler')
-rw-r--r--arch/mips/basler/excite/Makefile9
-rw-r--r--arch/mips/basler/excite/excite_dbg_io.c122
-rw-r--r--arch/mips/basler/excite/excite_device.c404
-rw-r--r--arch/mips/basler/excite/excite_flashtest.c294
-rw-r--r--arch/mips/basler/excite/excite_fpga.h80
-rw-r--r--arch/mips/basler/excite/excite_iodev.c183
-rw-r--r--arch/mips/basler/excite/excite_iodev.h10
-rw-r--r--arch/mips/basler/excite/excite_irq.c129
-rw-r--r--arch/mips/basler/excite/excite_procfs.c81
-rw-r--r--arch/mips/basler/excite/excite_prom.c148
-rw-r--r--arch/mips/basler/excite/excite_setup.c307
11 files changed, 1767 insertions, 0 deletions
diff --git a/arch/mips/basler/excite/Makefile b/arch/mips/basler/excite/Makefile
new file mode 100644
index 00000000000..519142c2e4e
--- /dev/null
+++ b/arch/mips/basler/excite/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for Basler eXcite
+#
+
+obj-$(CONFIG_BASLER_EXCITE) += excite_irq.o excite_prom.o excite_setup.o \
+ excite_device.o excite_procfs.o
+
+obj-$(CONFIG_KGDB) += excite_dbg_io.o
+obj-m += excite_iodev.o
diff --git a/arch/mips/basler/excite/excite_dbg_io.c b/arch/mips/basler/excite/excite_dbg_io.c
new file mode 100644
index 00000000000..83f6bddf578
--- /dev/null
+++ b/arch/mips/basler/excite/excite_dbg_io.c
@@ -0,0 +1,122 @@
+/*
+ * Copyright (C) 2004 by Basler Vision Technologies AG
+ * Author: Thomas Koeller <thomas.koeller@baslerweb.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/gdb-stub.h>
+#include <asm/rm9k-ocd.h>
+#include <excite.h>
+
+#if defined(CONFIG_SERIAL_8250) && CONFIG_SERIAL_8250_NR_UARTS > 1
+#error Debug port used by serial driver
+#endif
+
+#define UART_CLK 25000000
+#define BASE_BAUD (UART_CLK / 16)
+#define REGISTER_BASE_0 0x0208UL
+#define REGISTER_BASE_1 0x0238UL
+
+#define REGISTER_BASE_DBG REGISTER_BASE_1
+
+#define CPRR 0x0004
+#define UACFG 0x0200
+#define UAINTS 0x0204
+#define UARBR (REGISTER_BASE_DBG + 0x0000)
+#define UATHR (REGISTER_BASE_DBG + 0x0004)
+#define UADLL (REGISTER_BASE_DBG + 0x0008)
+#define UAIER (REGISTER_BASE_DBG + 0x000c)
+#define UADLH (REGISTER_BASE_DBG + 0x0010)
+#define UAIIR (REGISTER_BASE_DBG + 0x0014)
+#define UAFCR (REGISTER_BASE_DBG + 0x0018)
+#define UALCR (REGISTER_BASE_DBG + 0x001c)
+#define UAMCR (REGISTER_BASE_DBG + 0x0020)
+#define UALSR (REGISTER_BASE_DBG + 0x0024)
+#define UAMSR (REGISTER_BASE_DBG + 0x0028)
+#define UASCR (REGISTER_BASE_DBG + 0x002c)
+
+#define PARITY_NONE 0
+#define PARITY_ODD 0x08
+#define PARITY_EVEN 0x18
+#define PARITY_MARK 0x28
+#define PARITY_SPACE 0x38
+
+#define DATA_5BIT 0x0
+#define DATA_6BIT 0x1
+#define DATA_7BIT 0x2
+#define DATA_8BIT 0x3
+
+#define STOP_1BIT 0x0
+#define STOP_2BIT 0x4
+
+#define BAUD_DBG 57600
+#define PARITY_DBG PARITY_NONE
+#define DATA_DBG DATA_8BIT
+#define STOP_DBG STOP_1BIT
+
+/* Initialize the serial port for KGDB debugging */
+void __init excite_kgdb_init(void)
+{
+ const u32 divisor = BASE_BAUD / BAUD_DBG;
+
+ /* Take the UART out of reset */
+ titan_writel(0x00ff1cff, CPRR);
+ titan_writel(0x00000000, UACFG);
+ titan_writel(0x00000002, UACFG);
+
+ titan_writel(0x0, UALCR);
+ titan_writel(0x0, UAIER);
+
+ /* Disable FIFOs */
+ titan_writel(0x00, UAFCR);
+
+ titan_writel(0x80, UALCR);
+ titan_writel(divisor & 0xff, UADLL);
+ titan_writel((divisor & 0xff00) >> 8, UADLH);
+ titan_writel(0x0, UALCR);
+
+ titan_writel(DATA_DBG | PARITY_DBG | STOP_DBG, UALCR);
+
+ /* Enable receiver interrupt */
+ titan_readl(UARBR);
+ titan_writel(0x1, UAIER);
+}
+
+int getDebugChar(void)
+{
+ while (!(titan_readl(UALSR) & 0x1));
+ return titan_readl(UARBR);
+}
+
+int putDebugChar(int data)
+{
+ while (!(titan_readl(UALSR) & 0x20));
+ titan_writel(data, UATHR);
+ return 1;
+}
+
+/* KGDB interrupt handler */
+asmlinkage void excite_kgdb_inthdl(struct pt_regs *regs)
+{
+ if (unlikely(
+ ((titan_readl(UAIIR) & 0x7) == 4)
+ && ((titan_readl(UARBR) & 0xff) == 0x3)))
+ set_async_breakpoint(&regs->cp0_epc);
+}
diff --git a/arch/mips/basler/excite/excite_device.c b/arch/mips/basler/excite/excite_device.c
new file mode 100644
index 00000000000..34ec76716fa
--- /dev/null
+++ b/arch/mips/basler/excite/excite_device.c
@@ -0,0 +1,404 @@
+/*
+ * Copyright (C) 2004 by Basler Vision Technologies AG
+ * Author: Thomas Koeller <thomas.koeller@baslerweb.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ioport.h>
+#include <linux/err.h>
+#include <linux/jiffies.h>
+#include <linux/sched.h>
+#include <asm/types.h>
+#include <asm/rm9k-ocd.h>
+
+#include <excite.h>
+#include <rm9k_eth.h>
+#include <rm9k_wdt.h>
+#include <rm9k_xicap.h>
+#include <excite_nandflash.h>
+
+#include "excite_iodev.h"
+
+#define RM9K_GE_UNIT 0
+#define XICAP_UNIT 0
+#define NAND_UNIT 0
+
+#define DLL_TIMEOUT 3 /* seconds */
+
+
+#define RINIT(__start__, __end__, __name__, __parent__) { \
+ .name = __name__ "_0", \
+ .start = (__start__), \
+ .end = (__end__), \
+ .flags = 0, \
+ .parent = (__parent__) \
+}
+
+#define RINIT_IRQ(__irq__, __name__) { \
+ .name = __name__ "_0", \
+ .start = (__irq__), \
+ .end = (__irq__), \
+ .flags = IORESOURCE_IRQ, \
+ .parent = NULL \
+}
+
+
+
+enum {
+ slice_xicap,
+ slice_eth
+};
+
+
+
+static struct resource
+ excite_ctr_resource = {
+ .name = "GPI counters",
+ .start = 0,
+ .end = 5,
+ .flags = 0,
+ .parent = NULL,
+ .sibling = NULL,
+ .child = NULL
+ },
+ excite_gpislice_resource = {
+ .name = "GPI slices",
+ .start = 0,
+ .end = 1,
+ .flags = 0,
+ .parent = NULL,
+ .sibling = NULL,
+ .child = NULL
+ },
+ excite_mdio_channel_resource = {
+ .name = "MDIO channels",
+ .start = 0,
+ .end = 1,
+ .flags = 0,
+ .parent = NULL,
+ .sibling = NULL,
+ .child = NULL
+ },
+ excite_fifomem_resource = {
+ .name = "FIFO memory",
+ .start = 0,
+ .end = 767,
+ .flags = 0,
+ .parent = NULL,
+ .sibling = NULL,
+ .child = NULL
+ },
+ excite_scram_resource = {
+ .name = "Scratch RAM",
+ .start = EXCITE_PHYS_SCRAM,
+ .end = EXCITE_PHYS_SCRAM + EXCITE_SIZE_SCRAM - 1,
+ .flags = IORESOURCE_MEM,
+ .parent = NULL,
+ .sibling = NULL,
+ .child = NULL
+ },
+ excite_fpga_resource = {
+ .name = "System FPGA",
+ .start = EXCITE_PHYS_FPGA,
+ .end = EXCITE_PHYS_FPGA + EXCITE_SIZE_FPGA - 1,
+ .flags = IORESOURCE_MEM,
+ .parent = NULL,
+ .sibling = NULL,
+ .child = NULL
+ },
+ excite_nand_resource = {
+ .name = "NAND flash control",
+ .start = EXCITE_PHYS_NAND,
+ .end = EXCITE_PHYS_NAND + EXCITE_SIZE_NAND - 1,
+ .flags = IORESOURCE_MEM,
+ .parent = NULL,
+ .sibling = NULL,
+ .child = NULL
+ },
+ excite_titan_resource = {
+ .name = "TITAN registers",
+ .start = EXCITE_PHYS_TITAN,
+ .end = EXCITE_PHYS_TITAN + EXCITE_SIZE_TITAN - 1,
+ .flags = IORESOURCE_MEM,
+ .parent = NULL,
+ .sibling = NULL,
+ .child = NULL
+ };
+
+
+
+static void adjust_resources(struct resource *res, unsigned int n)
+{
+ struct resource *p;
+ const unsigned long mask = IORESOURCE_IO | IORESOURCE_MEM
+ | IORESOURCE_IRQ | IORESOURCE_DMA;
+
+ for (p = res; p < res + n; p++) {
+ const struct resource * const parent = p->parent;
+ if (parent) {
+ p->start += parent->start;
+ p->end += parent->start;
+ p->flags = parent->flags & mask;
+ }
+ }
+}
+
+
+
+#if defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE)
+static struct resource xicap_rsrc[] = {
+ RINIT(0x4840, 0x486f, XICAP_RESOURCE_FIFO_RX, &excite_titan_resource),
+ RINIT(0x4940, 0x494b, XICAP_RESOURCE_FIFO_TX, &excite_titan_resource),
+ RINIT(0x5040, 0x5127, XICAP_RESOURCE_XDMA, &excite_titan_resource),
+ RINIT(0x1000, 0x112f, XICAP_RESOURCE_PKTPROC, &excite_titan_resource),
+ RINIT(0x1100, 0x110f, XICAP_RESOURCE_PKT_STREAM, &excite_fpga_resource),
+ RINIT(0x0800, 0x0bff, XICAP_RESOURCE_DMADESC, &excite_scram_resource),
+ RINIT(slice_xicap, slice_xicap, XICAP_RESOURCE_GPI_SLICE, &excite_gpislice_resource),
+ RINIT(0x0100, 0x02ff, XICAP_RESOURCE_FIFO_BLK, &excite_fifomem_resource),
+ RINIT_IRQ(TITAN_IRQ, XICAP_RESOURCE_IRQ)
+};
+
+static struct platform_device xicap_pdev = {
+ .name = XICAP_NAME,
+ .id = XICAP_UNIT,
+ .num_resources = ARRAY_SIZE(xicap_rsrc),
+ .resource = xicap_rsrc
+};
+
+/*
+ * Create a platform device for the GPI port that receives the
+ * image data from the embedded camera.
+ */
+static int __init xicap_devinit(void)
+{
+ unsigned long tend;
+ u32 reg;
+ int retval;
+
+ adjust_resources(xicap_rsrc, ARRAY_SIZE(xicap_rsrc));
+
+ /* Power up the slice and configure it. */
+ reg = titan_readl(CPTC1R);
+ reg &= ~(0x11100 << slice_xicap);
+ titan_writel(reg, CPTC1R);
+
+ /* Enable slice & DLL. */
+ reg= titan_readl(CPRR);
+ reg &= ~(0x00030003 << (slice_xicap * 2));
+ titan_writel(reg, CPRR);
+
+ /* Wait for DLLs to lock */
+ tend = jiffies + DLL_TIMEOUT * HZ;
+ while (time_before(jiffies, tend)) {
+ if (!(~titan_readl(CPDSR) & (0x1 << (slice_xicap * 4))))
+ break;
+ yield();
+ }
+
+ if (~titan_readl(CPDSR) & (0x1 << (slice_xicap * 4))) {
+ printk(KERN_ERR "%s: DLL not locked after %u seconds\n",
+ xicap_pdev.name, DLL_TIMEOUT);
+ retval = -ETIME;
+ } else {
+ /* Register platform device */
+ retval = platform_device_register(&xicap_pdev);
+ }
+
+ return retval;
+}
+
+device_initcall(xicap_devinit);
+#endif /* defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE) */
+
+
+
+#if defined(CONFIG_WDT_RM9K_GPI) || defined(CONFIG_WDT_RM9K_GPI_MODULE)
+static struct resource wdt_rsrc[] = {
+ RINIT(0, 0, WDT_RESOURCE_COUNTER, &excite_ctr_resource),
+ RINIT(0x0084, 0x008f, WDT_RESOURCE_REGS, &excite_titan_resource),
+ RINIT_IRQ(TITAN_IRQ, WDT_RESOURCE_IRQ)
+};
+
+static struct platform_device wdt_pdev = {
+ .name = WDT_NAME,
+ .id = -1,
+ .num_resources = ARRAY_SIZE(wdt_rsrc),
+ .resource = wdt_rsrc
+};
+
+/*
+ * Create a platform device for the GPI port that receives the
+ * image data from the embedded camera.
+ */
+static int __init wdt_devinit(void)
+{
+ adjust_resources(wdt_rsrc, ARRAY_SIZE(wdt_rsrc));
+ return platform_device_register(&wdt_pdev);
+}
+
+device_initcall(wdt_devinit);
+#endif /* defined(CONFIG_WDT_RM9K_GPI) || defined(CONFIG_WDT_RM9K_GPI_MODULE) */
+
+
+
+static struct resource excite_nandflash_rsrc[] = {
+ RINIT(0x2000, 0x201f, EXCITE_NANDFLASH_RESOURCE_REGS, &excite_nand_resource)
+};
+
+static struct platform_device excite_nandflash_pdev = {
+ .name = "excite_nand",
+ .id = NAND_UNIT,
+ .num_resources = ARRAY_SIZE(excite_nandflash_rsrc),
+ .resource = excite_nandflash_rsrc
+};
+
+/*
+ * Create a platform device for the access to the nand-flash
+ * port
+ */
+static int __init excite_nandflash_devinit(void)
+{
+ adjust_resources(excite_nandflash_rsrc, ARRAY_SIZE(excite_nandflash_rsrc));
+
+ /* nothing to be done here */
+
+ /* Register platform device */
+ return platform_device_register(&excite_nandflash_pdev);
+}
+
+device_initcall(excite_nandflash_devinit);
+
+
+
+static struct resource iodev_rsrc[] = {
+ RINIT_IRQ(FPGA1_IRQ, IODEV_RESOURCE_IRQ)
+};
+
+static struct platform_device io_pdev = {
+ .name = IODEV_NAME,
+ .id = -1,
+ .num_resources = ARRAY_SIZE(iodev_rsrc),
+ .resource = iodev_rsrc
+};
+
+/*
+ * Create a platform device for the external I/O ports.
+ */
+static int __init io_devinit(void)
+{
+ adjust_resources(iodev_rsrc, ARRAY_SIZE(iodev_rsrc));
+ return platform_device_register(&io_pdev);
+}
+
+device_initcall(io_devinit);
+
+
+
+
+#if defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE)
+static struct resource rm9k_ge_rsrc[] = {
+ RINIT(0x2200, 0x27ff, RM9K_GE_RESOURCE_MAC, &excite_titan_resource),
+ RINIT(0x1800, 0x1fff, RM9K_GE_RESOURCE_MSTAT, &excite_titan_resource),
+ RINIT(0x2000, 0x212f, RM9K_GE_RESOURCE_PKTPROC, &excite_titan_resource),
+ RINIT(0x5140, 0x5227, RM9K_GE_RESOURCE_XDMA, &excite_titan_resource),
+ RINIT(0x4870, 0x489f, RM9K_GE_RESOURCE_FIFO_RX, &excite_titan_resource),
+ RINIT(0x494c, 0x4957, RM9K_GE_RESOURCE_FIFO_TX, &excite_titan_resource),
+ RINIT(0x0000, 0x007f, RM9K_GE_RESOURCE_FIFOMEM_RX, &excite_fifomem_resource),
+ RINIT(0x0080, 0x00ff, RM9K_GE_RESOURCE_FIFOMEM_TX, &excite_fifomem_resource),
+ RINIT(0x0180, 0x019f, RM9K_GE_RESOURCE_PHY, &excite_titan_resource),
+ RINIT(0x0000, 0x03ff, RM9K_GE_RESOURCE_DMADESC_RX, &excite_scram_resource),
+ RINIT(0x0400, 0x07ff, RM9K_GE_RESOURCE_DMADESC_TX, &excite_scram_resource),
+ RINIT(slice_eth, slice_eth, RM9K_GE_RESOURCE_GPI_SLICE, &excite_gpislice_resource),
+ RINIT(0, 0, RM9K_GE_RESOURCE_MDIO_CHANNEL, &excite_mdio_channel_resource),
+ RINIT_IRQ(TITAN_IRQ, RM9K_GE_RESOURCE_IRQ_MAIN),
+ RINIT_IRQ(PHY_IRQ, RM9K_GE_RESOURCE_IRQ_PHY)
+};
+
+static struct platform_device rm9k_ge_pdev = {
+ .name = RM9K_GE_NAME,
+ .id = RM9K_GE_UNIT,
+ .num_resources = ARRAY_SIZE(rm9k_ge_rsrc),
+ .resource = rm9k_ge_rsrc
+};
+
+
+
+/*
+ * Create a platform device for the Ethernet port.
+ */
+static int __init rm9k_ge_devinit(void)
+{
+ u32 reg;
+
+ adjust_resources(rm9k_ge_rsrc, ARRAY_SIZE(rm9k_ge_rsrc));
+
+ /* Power up the slice and configure it. */
+ reg = titan_readl(CPTC1R);
+ reg &= ~(0x11000 << slice_eth);
+ reg |= 0x100 << slice_eth;
+ titan_writel(reg, CPTC1R);
+
+ /* Take the MAC out of reset, reset the DLLs. */
+ reg = titan_readl(CPRR);
+ reg &= ~(0x00030000 << (slice_eth * 2));
+ reg |= 0x3 << (slice_eth * 2);
+ titan_writel(reg, CPRR);
+
+ return platform_device_register(&rm9k_ge_pdev);
+}
+
+device_initcall(rm9k_ge_devinit);
+#endif /* defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE) */
+
+
+
+static int __init excite_setup_devs(void)
+{
+ int res;
+ u32 reg;
+
+ /* Enable xdma and fifo interrupts */
+ reg = titan_readl(0x0050);
+ titan_writel(reg | 0x18000000, 0x0050);
+
+ res = request_resource(&iomem_resource, &excite_titan_resource);
+ if (res)
+ return res;
+ res = request_resource(&iomem_resource, &excite_scram_resource);
+ if (res)
+ return res;
+ res = request_resource(&iomem_resource, &excite_fpga_resource);
+ if (res)
+ return res;
+ res = request_resource(&iomem_resource, &excite_nand_resource);
+ if (res)
+ return res;
+ excite_fpga_resource.flags = excite_fpga_resource.parent->flags &
+ ( IORESOURCE_IO | IORESOURCE_MEM
+ | IORESOURCE_IRQ | IORESOURCE_DMA);
+ excite_nand_resource.flags = excite_nand_resource.parent->flags &
+ ( IORESOURCE_IO | IORESOURCE_MEM
+ | IORESOURCE_IRQ | IORESOURCE_DMA);
+
+ return 0;
+}
+
+arch_initcall(excite_setup_devs);
+
diff --git a/arch/mips/basler/excite/excite_flashtest.c b/arch/mips/basler/excite/excite_flashtest.c
new file mode 100644
index 00000000000..f0024a8e329
--- /dev/null
+++ b/arch/mips/basler/excite/excite_flashtest.c
@@ -0,0 +1,294 @@
+/*
+* Copyright (C) 2005 by Basler Vision Technologies AG
+* Author: Thies Moeller <thies.moeller@baslerweb.com>
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation; either version 2 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+
+#include <excite.h>
+
+#include <asm/io.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+#include <asm/rm9k-ocd.h> // for ocd_write
+#include <linux/workqueue.h> // for queue
+
+#include "excite_nandflash.h"
+#include "nandflash.h"
+
+#define PFX "excite flashtest: "
+typedef void __iomem *io_reg_t;
+
+#define io_readb(__a__) __raw_readb((__a__))
+#define io_writeb(__v__, __a__) __raw_writeb((__v__), (__a__))
+
+
+
+static inline const struct resource *excite_nandflash_get_resource(
+ struct platform_device *d, unsigned long flags, const char *basename)
+{
+ const char fmt[] = "%s_%u";
+ char buf[80];
+
+ if (unlikely(snprintf(buf, sizeof buf, fmt, basename, d->id) >= sizeof buf))
+ return NULL;
+
+ return platform_get_resource_byname(d, flags, buf);
+}
+
+static inline io_reg_t
+excite_nandflash_map_regs(struct platform_device *d, const char *basename)
+{
+ void *result = NULL;
+ const struct resource *const r =
+ excite_nandflash_get_resource(d, IORESOURCE_MEM, basename);
+ if (r)
+ result = ioremap_nocache(r->start, r->end + 1 - r->start);
+ return result;
+}
+
+/* controller and mtd information */
+
+struct excite_nandflash_drvdata {
+ struct mtd_info board_mtd;
+ struct nand_chip board_chip;
+ io_reg_t regs;
+};
+
+
+/* command and control functions */
+static void excite_nandflash_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+ struct nand_chip *this = mtd->priv;
+ io_reg_t regs = container_of(mtd,struct excite_nandflash_drvdata,board_mtd)->regs;
+
+ switch (cmd) {
+ /* Select the command latch */
+ case NAND_CTL_SETCLE: this->IO_ADDR_W = regs + EXCITE_NANDFLASH_CMD;
+ break;
+ /* Deselect the command latch */
+ case NAND_CTL_CLRCLE: this->IO_ADDR_W = regs + EXCITE_NANDFLASH_DATA;
+ break;
+ /* Select the address latch */
+ case NAND_CTL_SETALE: this->IO_ADDR_W = regs + EXCITE_NANDFLASH_ADDR;
+ break;
+ /* Deselect the address latch */
+ case NAND_CTL_CLRALE: this->IO_ADDR_W = regs + EXCITE_NANDFLASH_DATA;
+ break;
+ /* Select the chip -- not used */
+ case NAND_CTL_SETNCE:
+ break;
+ /* Deselect the chip -- not used */
+ case NAND_CTL_CLRNCE:
+ break;
+ }
+
+ this->IO_ADDR_R = this->IO_ADDR_W;
+}
+
+/* excite_nandflash_devready()
+ *
+ * returns 0 if the nand is busy, 1 if it is ready
+ */
+static int excite_nandflash_devready(struct mtd_info *mtd)
+{
+ struct excite_nandflash_drvdata *drvdata =
+ container_of(mtd, struct excite_nandflash_drvdata, board_mtd);
+
+ return io_readb(drvdata->regs + EXCITE_NANDFLASH_STATUS);
+}
+
+/* device management functions */
+
+/* excite_nandflash_remove
+ *
+ * called by device layer to remove the driver
+ * the binding to the mtd and all allocated
+ * resources are released
+ */
+static int excite_nandflash_remove(struct device *dev)
+{
+ struct excite_nandflash_drvdata *this = dev_get_drvdata(dev);
+
+ pr_info(PFX "remove");
+
+ dev_set_drvdata(dev, NULL);
+
+ if (this == NULL) {
+ pr_debug(PFX "call remove without private data!!");
+ return 0;
+ }
+
+
+ /* free the common resources */
+ if (this->regs != NULL) {
+ iounmap(this->regs);
+ this->regs = NULL;
+ }
+
+ kfree(this);
+
+ return 0;
+}
+
+static int elapsed;
+
+void my_workqueue_handler(void *arg)
+{
+ elapsed = 1;
+}
+
+DECLARE_WORK(sigElapsed, my_workqueue_handler, 0);
+
+
+/* excite_nandflash_probe
+ *
+ * called by device layer when it finds a device matching
+ * one our driver can handled. This code checks to see if
+ * it can allocate all necessary resources then calls the
+ * nand layer to look for devices
+*/
+static int excite_nandflash_probe(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+
+ struct excite_nandflash_drvdata *drvdata; /* private driver data */
+ struct nand_chip *board_chip; /* private flash chip data */
+ struct mtd_info *board_mtd; /* mtd info for this board */
+
+ int err = 0;
+ int count = 0;
+ struct timeval tv,endtv;
+ unsigned int dt;
+
+ pr_info(PFX "probe dev: (%p)\n", dev);
+
+ pr_info(PFX "adjust LB timing\n");
+ ocd_writel(0x00000330, LDP2);
+
+ drvdata = kmalloc(sizeof(*drvdata), GFP_KERNEL);
+ if (unlikely(!drvdata)) {
+ printk(KERN_ERR PFX "no memory for drvdata\n");
+ err = -ENOMEM;
+ goto mem_error;
+ }
+
+ /* Initialize structures */
+ memset(drvdata, 0, sizeof(*drvdata));
+
+ /* bind private data into driver */
+ dev_set_drvdata(dev, drvdata);
+
+ /* allocate and map the resource */
+ drvdata->regs =
+ excite_nandflash_map_regs(pdev, EXCITE_NANDFLASH_RESOURCE_REGS);
+
+ if (unlikely(!drvdata->regs)) {
+ printk(KERN_ERR PFX "cannot reserve register region\n");
+ err = -ENXIO;
+ goto io_error;
+ }
+
+ /* initialise our chip */
+ board_chip = &drvdata->board_chip;
+
+ board_chip->IO_ADDR_R = drvdata->regs + EXCITE_NANDFLASH_DATA;
+ board_chip->IO_ADDR_W = drvdata->regs + EXCITE_NANDFLASH_DATA;
+
+ board_chip->hwcontrol = excite_nandflash_hwcontrol;
+ board_chip->dev_ready = excite_nandflash_devready;
+
+ board_chip->chip_delay = 25;
+ #if 0
+ /* TODO: speedup the initial scan */
+ board_chip->options = NAND_USE_FLASH_BBT;
+ #endif
+ board_chip->eccmode = NAND_ECC_SOFT;
+
+ /* link chip to mtd */
+ board_mtd = &drvdata->board_mtd;
+ board_mtd->priv = board_chip;
+
+
+ pr_info(PFX "FlashTest\n");
+ elapsed = 0;
+/* schedule_delayed_work(&sigElapsed, 1*HZ);
+ while (!elapsed) {
+ io_readb(drvdata->regs + EXCITE_NANDFLASH_STATUS);
+ count++;
+ }
+ pr_info(PFX "reads in 1 sec --> %d\n",count);
+*/
+ do_gettimeofday(&tv);
+ for (count = 0 ; count < 1000000; count ++) {
+ io_readb(drvdata->regs + EXCITE_NANDFLASH_STATUS);
+ }
+ do_gettimeofday(&endtv);
+ dt = (endtv.tv_sec - tv.tv_sec) * 1000000 + endtv.tv_usec - tv.tv_usec;
+ pr_info(PFX "%8d us timeval\n",dt);
+ pr_info(PFX "EndFlashTest\n");
+
+/* return with error to unload everything
+*/
+io_error:
+ iounmap(drvdata->regs);
+
+mem_error:
+ kfree(drvdata);
+
+ if (err == 0)
+ err = -EINVAL;
+ return err;
+}
+
+static struct device_driver excite_nandflash_driver = {
+ .name = "excite_nand",
+ .bus = &platform_bus_type,
+ .probe = excite_nandflash_probe,
+ .remove = excite_nandflash_remove,
+};
+
+static int __init excite_nandflash_init(void)
+{
+ pr_info(PFX "register Driver (Rev: $Revision:$)\n");
+ return driver_register(&excite_nandflash_driver);
+}
+
+static void __exit excite_nandflash_exit(void)
+{
+ driver_unregister(&excite_nandflash_driver);
+ pr_info(PFX "Driver unregistered");
+}
+
+module_init(excite_nandflash_init);
+module_exit(excite_nandflash_exit);
+
+MODULE_AUTHOR("Thies Moeller <thies.moeller@baslerweb.com>");
+MODULE_DESCRIPTION("Basler eXcite NAND-Flash driver");
+MODULE_LICENSE("GPL");
diff --git a/arch/mips/basler/excite/excite_fpga.h b/arch/mips/basler/excite/excite_fpga.h
new file mode 100644
index 00000000000..38fcda703a0
--- /dev/null
+++ b/arch/mips/basler/excite/excite_fpga.h
@@ -0,0 +1,80 @@
+#ifndef EXCITE_FPGA_H_INCLUDED
+#define EXCITE_FPGA_H_INCLUDED
+
+
+/**
+ * Adress alignment of the individual FPGA bytes.
+ * The address arrangement of the individual bytes of the FPGA is two
+ * byte aligned at the embedded MK2 platform.
+ */
+#ifdef EXCITE_CCI_FPGA_MK2
+typedef unsigned char excite_cci_fpga_align_t __attribute__ ((aligned(2)));
+#else
+typedef unsigned char excite_cci_fpga_align_t;
+#endif
+
+
+/**
+ * Size of Dual Ported RAM.
+ */
+#define EXCITE_DPR_SIZE 263
+
+
+/**
+ * Size of Reserved Status Fields in Dual Ported RAM.
+ */
+#define EXCITE_DPR_STATUS_SIZE 7
+
+
+
+/**
+ * FPGA.
+ * Hardware register layout of the FPGA interface. The FPGA must accessed
+ * byte wise solely.
+ * @see EXCITE_CCI_DPR_MK2
+ */
+typedef struct excite_fpga {
+
+ /**
+ * Dual Ported RAM.
+ */
+ excite_cci_fpga_align_t dpr[EXCITE_DPR_SIZE];
+
+ /**
+ * Status.
+ */
+ excite_cci_fpga_align_t status[EXCITE_DPR_STATUS_SIZE];
+
+#ifdef EXCITE_CCI_FPGA_MK2
+ /**
+ * RM9000 Interrupt.
+ * Write access initiates interrupt at the RM9000 (MIPS) processor of the eXcite.
+ */
+ excite_cci_fpga_align_t rm9k_int;
+#else
+ /**
+ * MK2 Interrupt.
+ * Write access initiates interrupt at the ARM processor of the MK2.
+ */
+ excite_cci_fpga_align_t mk2_int;
+
+ excite_cci_fpga_align_t gap[0x1000-0x10f];
+
+ /**
+ * IRQ Source/Acknowledge.
+ */
+ excite_cci_fpga_align_t rm9k_irq_src;
+
+ /**
+ * IRQ Mask.
+ * Set bits enable the related interrupt.
+ */
+ excite_cci_fpga_align_t rm9k_irq_mask;
+#endif
+
+
+} excite_fpga;
+
+
+
+#endif /* ndef EXCITE_FPGA_H_INCLUDED */
diff --git a/arch/mips/basler/excite/excite_iodev.c b/arch/mips/basler/excite/excite_iodev.c
new file mode 100644
index 00000000000..91121e52304
--- /dev/null
+++ b/arch/mips/basler/excite/excite_iodev.c
@@ -0,0 +1,183 @@
+/*
+ * Copyright (C) 2005 by Basler Vision Technologies AG
+ * Author: Thomas Koeller <thomas.koeller@baslerweb.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/config.h>
+#include <linux/compiler.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/poll.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/miscdevice.h>
+
+#include "excite_iodev.h"
+
+
+
+static const struct resource *iodev_get_resource(struct platform_device *, const char *, unsigned int);
+static int __init iodev_probe(struct device *);
+static int __exit iodev_remove(struct device *);
+static int iodev_open(struct inode *, struct file *);
+static int iodev_release(struct inode *, struct file *);
+static ssize_t iodev_read(struct file *, char __user *, size_t s, loff_t *);
+static unsigned int iodev_poll(struct file *, struct poll_table_struct *);
+static irqreturn_t iodev_irqhdl(int, void *, struct pt_regs *);
+
+
+
+static const char iodev_name[] = "iodev";
+static unsigned int iodev_irq;
+static DECLARE_WAIT_QUEUE_HEAD(wq);
+
+
+
+static struct file_operations fops =
+{
+ .owner = THIS_MODULE,
+ .open = iodev_open,
+ .release = iodev_release,
+ .read = iodev_read,
+ .poll = iodev_poll
+};
+
+static struct miscdevice miscdev =
+{
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = iodev_name,
+ .fops = &fops
+};
+
+static struct device_driver iodev_driver =
+{
+ .name = (char *) iodev_name,
+ .bus = &platform_bus_type,
+ .owner = THIS_MODULE,
+ .probe = iodev_probe,
+ .remove = __exit_p(iodev_remove)
+};
+
+
+
+static const struct resource *
+iodev_get_resource(struct platform_device *pdv, const char *name,
+ unsigned int type)
+{
+ char buf[80];
+ if (snprintf(buf, sizeof buf, "%s_0", name) >= sizeof buf)
+ return NULL;
+ return platform_get_resource_byname(pdv, type, buf);
+}
+
+
+
+/* No hotplugging on the platform bus - use __init */
+static int __init iodev_probe(struct device *dev)
+{
+ struct platform_device * const pdv = to_platform_device(dev);
+ const struct resource * const ri =
+ iodev_get_resource(pdv, IODEV_RESOURCE_IRQ, IORESOURCE_IRQ);
+
+ if (unlikely(!ri))
+ return -ENXIO;
+
+ iodev_irq = ri->start;
+ return misc_register(&miscdev);
+}
+
+
+
+static int __exit iodev_remove(struct device *dev)
+{
+ return misc_deregister(&miscdev);
+}
+
+
+
+static int iodev_open(struct inode *i, struct file *f)
+{
+ return request_irq(iodev_irq, iodev_irqhdl, SA_INTERRUPT,
+ iodev_name, &miscdev);
+}
+
+
+
+static int iodev_release(struct inode *i, struct file *f)
+{
+ free_irq(iodev_irq, &miscdev);
+ return 0;
+}
+
+
+
+
+static ssize_t
+iodev_read(struct file *f, char __user *d, size_t s, loff_t *o)
+{
+ ssize_t ret;
+ DEFINE_WAIT(w);
+
+ prepare_to_wait(&wq, &w, TASK_INTERRUPTIBLE);
+ if (!signal_pending(current))
+ schedule();
+ ret = signal_pending(current) ? -ERESTARTSYS : 0;
+ finish_wait(&wq, &w);
+ return ret;
+}
+
+
+static unsigned int iodev_poll(struct file *f, struct poll_table_struct *p)
+{
+ poll_wait(f, &wq, p);
+ return POLLOUT | POLLWRNORM;
+}
+
+
+
+
+static irqreturn_t iodev_irqhdl(int irq, void *ctxt, struct pt_regs *regs)
+{
+ wake_up(&wq);
+ return IRQ_HANDLED;
+}
+
+
+
+static int __init iodev_init_module(void)
+{
+ return driver_register(&iodev_driver);
+}
+
+
+
+static void __exit iodev_cleanup_module(void)
+{
+ driver_unregister(&iodev_driver);
+}
+
+module_init(iodev_init_module);
+module_exit(iodev_cleanup_module);
+
+
+
+MODULE_AUTHOR("Thomas Koeller <thomas.koeller@baslerweb.com>");
+MODULE_DESCRIPTION("Basler eXcite i/o interrupt handler");
+MODULE_VERSION("0.0");
+MODULE_LICENSE("GPL");
diff --git a/arch/mips/basler/excite/excite_iodev.h b/arch/mips/basler/excite/excite_iodev.h
new file mode 100644
index 00000000000..cbfbb5d2ee6
--- /dev/null
+++ b/arch/mips/basler/excite/excite_iodev.h
@@ -0,0 +1,10 @@
+#ifndef __EXCITE_IODEV_H__
+#define __EXCITE_IODEV_H__
+
+/* Device name */
+#define IODEV_NAME "iodev"
+
+/* Resource names */
+#define IODEV_RESOURCE_IRQ "excite_iodev_irq"
+
+#endif /* __EXCITE_IODEV_H__ */
diff --git a/arch/mips/basler/excite/excite_irq.c b/arch/mips/basler/excite/excite_irq.c
new file mode 100644
index 00000000000..511ad8730f5
--- /dev/null
+++ b/arch/mips/basler/excite/excite_irq.c
@@ -0,0 +1,129 @@
+/*
+ * Copyright (C) by Basler Vision Technologies AG
+ * Author: Thomas Koeller <thomas.koeller@baslereb.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <asm/bitops.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+#include <asm/rm9k-ocd.h>
+
+#include <excite.h>
+
+extern asmlinkage void excite_handle_int(void);
+
+/*
+ * Initialize the interrupt handler
+ */
+void __init arch_init_irq(void)
+{
+ mips_cpu_irq_init(0);
+ rm7k_cpu_irq_init(8);
+ rm9k_cpu_irq_init(12);
+
+#ifdef CONFIG_KGDB
+ excite_kgdb_init();
+#endif
+}
+
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+ const u32
+ interrupts = read_c0_cause() >> 8,
+ mask = ((read_c0_status() >> 8) & 0x000000ff) |
+ (read_c0_intcontrol() & 0x0000ff00),
+ pending = interrupts & mask;
+ u32 msgintflags, msgintmask, msgint;
+
+ /* process timer interrupt */
+ if (pending & (1 << TIMER_IRQ)) {
+ do_IRQ(TIMER_IRQ, regs);
+ return;
+ }
+
+ /* Process PCI interrupts */
+#if USB_IRQ < 10
+ msgintflags = ocd_readl(INTP0Status0 + (USB_MSGINT / 0x20 * 0x10));
+ msgintmask = ocd_readl(INTP0Mask0 + (USB_MSGINT / 0x20 * 0x10));
+ msgint = msgintflags & msgintmask & (0x1 << (USB_MSGINT % 0x20));
+ if ((pending & (1 << USB_IRQ)) && msgint) {
+#else
+ if (pending & (1 << USB_IRQ)) {
+#endif
+ do_IRQ(USB_IRQ, regs);
+ return;
+ }
+
+ /* Process TITAN interrupts */
+ msgintflags = ocd_readl(INTP0Status0 + (TITAN_MSGINT / 0x20 * 0x10));
+ msgintmask = ocd_readl(INTP0Mask0 + (TITAN_MSGINT / 0x20 * 0x10));
+ msgint = msgintflags & msgintmask & (0x1 << (TITAN_MSGINT % 0x20));
+ if ((pending & (1 << TITAN_IRQ)) && msgint) {
+ ocd_writel(msgint, INTP0Clear0 + (TITAN_MSGINT / 0x20 * 0x10));
+#if defined(CONFIG_KGDB)
+ excite_kgdb_inthdl(regs);
+#endif
+ do_IRQ(TITAN_IRQ, regs);
+ return;
+ }
+
+ /* Process FPGA line #0 interrupts */
+ msgintflags = ocd_readl(INTP0Status0 + (FPGA0_MSGINT / 0x20 * 0x10));
+ msgintmask = ocd_readl(INTP0Mask0 + (FPGA0_MSGINT / 0x20 * 0x10));
+ msgint = msgintflags & msgintmask & (0x1 << (FPGA0_MSGINT % 0x20));
+ if ((pending & (1 << FPGA0_IRQ)) && msgint) {
+ do_IRQ(FPGA0_IRQ, regs);
+ return;
+ }
+
+ /* Process FPGA line #1 interrupts */
+ msgintflags = ocd_readl(INTP0Status0 + (FPGA1_MSGINT / 0x20 * 0x10));
+ msgintmask = ocd_readl(INTP0Mask0 + (FPGA1_MSGINT / 0x20 * 0x10));
+ msgint = msgintflags & msgintmask & (0x1 << (FPGA1_MSGINT % 0x20));
+ if ((pending & (1 << FPGA1_IRQ)) && msgint) {
+ do_IRQ(FPGA1_IRQ, regs);
+ return;
+ }
+
+ /* Process PHY interrupts */
+ msgintflags = ocd_readl(INTP0Status0 + (PHY_MSGINT / 0x20 * 0x10));
+ msgintmask = ocd_readl(INTP0Mask0 + (PHY_MSGINT / 0x20 * 0x10));
+ msgint = msgintflags & msgintmask & (0x1 << (PHY_MSGINT % 0x20));
+ if ((pending & (1 << PHY_IRQ)) && msgint) {
+ do_IRQ(PHY_IRQ, regs);
+ return;
+ }
+
+ /* Process spurious interrupts */
+ spurious_interrupt(regs);
+}
diff --git a/arch/mips/basler/excite/excite_procfs.c b/arch/mips/basler/excite/excite_procfs.c
new file mode 100644
index 00000000000..c62be0341fb
--- /dev/null
+++ b/arch/mips/basler/excite/excite_procfs.c
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2004, 2005 by Basler Vision Technologies AG
+ * Author: Thomas Koeller <thomas.koeller@baslerweb.com>
+ *
+ * Procfs support for Basler eXcite
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/config.h>
+#include <linux/proc_fs.h>
+#include <linux/stat.h>
+#include <asm/page.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/rm9k-ocd.h>
+
+#include <excite.h>
+
+static int excite_get_unit_id(char *buf, char **addr, off_t offs, int size)
+{
+ const int len = snprintf(buf, PAGE_SIZE, "%06x", unit_id);
+ const int w = len - offs;
+ *addr = buf + offs;
+ return w < size ? w : size;
+}
+
+static int
+excite_bootrom_read(char *page, char **start, off_t off, int count,
+ int *eof, void *data)
+{
+ void __iomem * src;
+
+ if (off >= EXCITE_SIZE_BOOTROM) {
+ *eof = 1;
+ return 0;
+ }
+
+ if ((off + count) > EXCITE_SIZE_BOOTROM)
+ count = EXCITE_SIZE_BOOTROM - off;
+
+ src = ioremap(EXCITE_PHYS_BOOTROM + off, count);
+ if (src) {
+ memcpy_fromio(page, src, count);
+ iounmap(src);
+ *start = page;
+ } else {
+ count = -ENOMEM;
+ }
+
+ return count;
+}
+
+void excite_procfs_init(void)
+{
+ /* Create & populate /proc/excite */
+ struct proc_dir_entry * const pdir = proc_mkdir("excite", &proc_root);
+ if (pdir) {
+ struct proc_dir_entry * e;
+
+ e = create_proc_info_entry("unit_id", S_IRUGO, pdir,
+ excite_get_unit_id);
+ if (e) e->size = 6;
+
+ e = create_proc_read_entry("bootrom", S_IRUGO, pdir,
+ excite_bootrom_read, NULL);
+ if (e) e->size = EXCITE_SIZE_BOOTROM;
+ }
+}
diff --git a/arch/mips/basler/excite/excite_prom.c b/arch/mips/basler/excite/excite_prom.c
new file mode 100644
index 00000000000..84724b27075
--- /dev/null
+++ b/arch/mips/basler/excite/excite_prom.c
@@ -0,0 +1,148 @@
+/*
+ * Copyright (C) 2004, 2005 by Thomas Koeller (thomas.koeller@baslerweb.com)
+ * Based on the PMC-Sierra Yosemite board support by Ralf Baechle and
+ * Manish Lachwani.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/smp.h>
+#include <linux/module.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/reboot.h>
+#include <asm/system.h>
+#include <asm/bootinfo.h>
+#include <asm/string.h>
+
+#include <excite.h>
+
+/* This struct is used by Redboot to pass arguments to the kernel */
+typedef struct
+{
+ char *name;
+ char *val;
+} t_env_var;
+
+struct parmblock {
+ t_env_var memsize;
+ t_env_var modetty0;
+ t_env_var ethaddr;
+ t_env_var env_end;
+ char *argv[2];
+ char text[0];
+};
+
+static unsigned int prom_argc;
+static const char ** prom_argv;
+static const t_env_var * prom_env;
+
+static void prom_halt(void) __attribute__((noreturn));
+static void prom_exit(void) __attribute__((noreturn));
+
+
+
+const char *get_system_type(void)
+{
+ return "Basler eXcite";
+}
+
+/*
+ * Halt the system
+ */
+static void prom_halt(void)
+{
+ printk(KERN_NOTICE "\n** System halted.\n");
+ while (1)
+ asm volatile (
+ "\t.set\tmips3\n"
+ "\twait\n"
+ "\t.set\tmips0\n"
+ );
+}
+
+/*
+ * Reset the CPU and re-enter Redboot
+ */
+static void prom_exit(void)
+{
+ unsigned int i;
+ volatile unsigned char * const flg =
+ (volatile unsigned char *) (EXCITE_ADDR_FPGA + EXCITE_FPGA_DPR);
+
+ /* Clear the watchdog reset flag, set the reboot flag */
+ *flg &= ~0x01;
+ *flg |= 0x80;
+
+ for (i = 0; i < 10; i++) {
+ *(volatile unsigned char *) (EXCITE_ADDR_FPGA + EXCITE_FPGA_SYSCTL) = 0x02;
+ iob();
+ mdelay(1000);
+ }
+
+ printk(KERN_NOTICE "Reset failed\n");
+ prom_halt();
+}
+
+static const char __init *prom_getenv(char *name)
+{
+ const t_env_var * p;
+ for (p = prom_env; p->name != NULL; p++)
+ if(strcmp(name, p->name) == 0)
+ break;
+ return p->val;
+}
+
+/*
+ * Init routine which accepts the variables from Redboot
+ */
+void __init prom_init(void)
+{
+ const struct parmblock * const pb = (struct parmblock *) fw_arg2;
+
+ prom_argc = fw_arg0;
+ prom_argv = (const char **) fw_arg1;
+ prom_env = &pb->memsize;
+
+ /* Callbacks for halt, restart */
+ _machine_restart = (void (*)(char *)) prom_exit;
+ _machine_halt = prom_halt;
+
+#ifdef CONFIG_32BIT
+ /* copy command line */
+ strcpy(arcs_cmdline, prom_argv[1]);
+ memsize = simple_strtol(prom_getenv("memsize"), NULL, 16);
+ strcpy(modetty, prom_getenv("modetty0"));
+#endif /* CONFIG_32BIT */
+
+#ifdef CONFIG_64BIT
+# error 64 bit support not implemented
+#endif /* CONFIG_64BIT */
+
+ mips_machgroup = MACH_GROUP_TITAN;
+ mips_machtype = MACH_TITAN_EXCITE;
+}
+
+/* This is called from free_initmem(), so we need to provide it */
+void __init prom_free_prom_memory(void)
+{
+ /* Nothing to do */
+}
diff --git a/arch/mips/basler/excite/excite_setup.c b/arch/mips/basler/excite/excite_setup.c
new file mode 100644
index 00000000000..005b025605e
--- /dev/null
+++ b/arch/mips/basler/excite/excite_setup.c
@@ -0,0 +1,307 @@
+/*
+ * Copyright (C) 2004, 2005 by Basler Vision Technologies AG
+ * Author: Thomas Koeller <thomas.koeller@baslerweb.com>
+ * Based on the PMC-Sierra Yosemite board support by Ralf Baechle and
+ * Manish Lachwani.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/tty.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/ioport.h>
+#include <linux/spinlock.h>
+#include <asm/bootinfo.h>
+#include <asm/mipsregs.h>
+#include <asm/pgtable-32.h>
+#include <asm/io.h>
+#include <asm/time.h>
+#include <asm/rm9k-ocd.h>
+
+#include <excite.h>
+
+#define TITAN_UART_CLK 25000000
+
+#if 1
+/* normal serial port assignment */
+#define REGBASE_SER0 0x0208
+#define REGBASE_SER1 0x0238
+#define MASK_SER0 0x1
+#define MASK_SER1 0x2
+#else
+/* serial ports swapped */
+#define REGBASE_SER0 0x0238
+#define REGBASE_SER1 0x0208
+#define MASK_SER0 0x2
+#define MASK_SER1 0x1
+#endif
+
+unsigned long memsize;
+char modetty[30];
+unsigned int titan_irq = TITAN_IRQ;
+static void __iomem * ctl_regs;
+u32 unit_id;
+
+volatile void __iomem * const ocd_base = (void *) (EXCITE_ADDR_OCD);
+volatile void __iomem * const titan_base = (void *) (EXCITE_ADDR_TITAN);
+
+/* Protect access to shared GPI registers */
+spinlock_t titan_lock = SPIN_LOCK_UNLOCKED;
+int titan_irqflags;
+
+
+static void excite_timer_init(void)
+{
+ const u32 modebit5 = ocd_readl(0x00e4);
+ unsigned int
+ mult = ((modebit5 >> 11) & 0x1f) + 2,
+ div = ((modebit5 >> 16) & 0x1f) + 2;
+
+ if (div == 33) div = 1;
+ mips_hpt_frequency = EXCITE_CPU_EXT_CLOCK * mult / div / 2;
+}
+
+static void excite_timer_setup(struct irqaction *irq)
+{
+ /* The eXcite platform uses the alternate timer interrupt */
+ set_c0_intcontrol(0x80);
+ setup_irq(TIMER_IRQ, irq);
+}
+
+static int __init excite_init_console(void)
+{
+#if defined(CONFIG_SERIAL_8250)
+ static __initdata char serr[] =
+ KERN_ERR "Serial port #%u setup failed\n";
+ struct uart_port up;
+
+ /* Take the DUART out of reset */
+ titan_writel(0x00ff1cff, CPRR);
+
+#if defined(CONFIG_KGDB) || (CONFIG_SERIAL_8250_NR_UARTS > 1)
+ /* Enable both ports */
+ titan_writel(MASK_SER0 | MASK_SER1, UACFG);
+#else
+ /* Enable port #0 only */
+ titan_writel(MASK_SER0, UACFG);
+#endif /* defined(CONFIG_KGDB) */
+
+ /*
+ * Set up serial port #0. Do not use autodetection; the result is
+ * not what we want.
+ */
+ memset(&up, 0, sizeof(up));
+ up.membase = (char *) titan_addr(REGBASE_SER0);
+ up.irq = TITAN_IRQ;
+ up.uartclk = TITAN_UART_CLK;
+ up.regshift = 0;
+ up.iotype = UPIO_MEM32;
+ up.type = PORT_RM9000;
+ up.flags = UPF_SHARE_IRQ;
+ up.line = 0;
+ if (early_serial_setup(&up))
+ printk(serr, up.line);
+
+#if CONFIG_SERIAL_8250_NR_UARTS > 1
+ /* And now for port #1. */
+ up.membase = (char *) titan_addr(REGBASE_SER1);
+ up.line = 1;
+ if (early_serial_setup(&up))
+ printk(serr, up.line);
+#endif /* CONFIG_SERIAL_8250_NR_UARTS > 1 */
+#else
+ /* Leave the DUART in reset */
+ titan_writel(0x00ff3cff, CPRR);
+#endif /* defined(CONFIG_SERIAL_8250) */
+
+ return 0;
+}
+
+static int __init excite_platform_init(void)
+{
+ unsigned int i;
+ unsigned char buf[3];
+ u8 reg;
+ void __iomem * dpr;
+
+ /* BIU buffer allocations */
+ ocd_writel(8, CPURSLMT); /* CPU */
+ titan_writel(4, CPGRWL); /* GPI / Ethernet */
+
+ /* Map control registers located in FPGA */
+ ctl_regs = ioremap_nocache(EXCITE_PHYS_FPGA + EXCITE_FPGA_SYSCTL, 16);
+ if (!ctl_regs)
+ panic("eXcite: failed to map platform control registers\n");
+ memcpy_fromio(buf, ctl_regs + 2, ARRAY_SIZE(buf));
+ unit_id = buf[0] | (buf[1] << 8) | (buf[2] << 16);
+
+ /* Clear the reboot flag */
+ dpr = ioremap_nocache(EXCITE_PHYS_FPGA + EXCITE_FPGA_DPR, 1);
+ reg = __raw_readb(dpr);
+ __raw_writeb(reg & 0x7f, dpr);
+ iounmap(dpr);
+
+ /* Interrupt controller setup */
+ for (i = INTP0Status0; i < INTP0Status0 + 0x80; i += 0x10) {
+ ocd_writel(0x00000000, i + 0x04);
+ ocd_writel(0xffffffff, i + 0x0c);
+ }
+ ocd_writel(0x2, NMICONFIG);
+
+ ocd_writel(0x1 << (TITAN_MSGINT % 0x20),
+ INTP0Mask0 + (0x10 * (TITAN_MSGINT / 0x20)));
+ ocd_writel((0x1 << (FPGA0_MSGINT % 0x20))
+ | ocd_readl(INTP0Mask0 + (0x10 * (FPGA0_MSGINT / 0x20))),
+ INTP0Mask0 + (0x10 * (FPGA0_MSGINT / 0x20)));
+ ocd_writel((0x1 << (FPGA1_MSGINT % 0x20))
+ | ocd_readl(INTP0Mask0 + (0x10 * (FPGA1_MSGINT / 0x20))),
+ INTP0Mask0 + (0x10 * (FPGA1_MSGINT / 0x20)));
+ ocd_writel((0x1 << (PHY_MSGINT % 0x20))
+ | ocd_readl(INTP0Mask0 + (0x10 * (PHY_MSGINT / 0x20))),
+ INTP0Mask0 + (0x10 * (PHY_MSGINT / 0x20)));
+#if USB_IRQ < 10
+ ocd_writel((0x1 << (USB_MSGINT % 0x20))
+ | ocd_readl(INTP0Mask0 + (0x10 * (USB_MSGINT / 0x20))),
+ INTP0Mask0 + (0x10 * (USB_MSGINT / 0x20)));
+#endif
+ /* Enable the packet FIFO, XDMA and XDMA arbiter */
+ titan_writel(0x00ff18ff, CPRR);
+
+ /*
+ * Set up the PADMUX. Power down all ethernet slices,
+ * they will be powered up and configured at device startup.
+ */
+ titan_writel(0x00878206, CPTC1R);
+ titan_writel(0x00001100, CPTC0R); /* latch PADMUX, enable WCIMODE */
+
+ /* Reset and enable the FIFO block */
+ titan_writel(0x00000001, SDRXFCIE);
+ titan_writel(0x00000001, SDTXFCIE);
+ titan_writel(0x00000100, SDRXFCIE);
+ titan_writel(0x00000000, SDTXFCIE);
+
+ /*
+ * Initialize the common interrupt shared by all components of
+ * the GPI/Ethernet subsystem.
+ */
+ titan_writel((EXCITE_PHYS_OCD >> 12), CPCFG0);
+ titan_writel(TITAN_MSGINT, CPCFG1);
+
+ /*
+ * XDMA configuration.
+ * In order for the XDMA to be sharable among multiple drivers,
+ * the setup must be done here in the platform. The reason is that
+ * this setup can only be done while the XDMA is in reset. If this
+ * were done in a driver, it would interrupt all other drivers
+ * using the XDMA.
+ */
+ titan_writel(0x80021dff, GXCFG); /* XDMA reset */
+ titan_writel(0x00000000, CPXCISRA);
+ titan_writel(0x00000000, CPXCISRB); /* clear pending interrupts */
+#if defined (CONFIG_HIGHMEM)
+# error change for HIGHMEM support!
+#else
+ titan_writel(0x00000000, GXDMADRPFX); /* buffer address prefix */
+#endif
+ titan_writel(0, GXDMA_DESCADR);
+
+ for (i = 0x5040; i <= 0x5300; i += 0x0040)
+ titan_writel(0x80080000, i); /* reset channel */
+
+ titan_writel((0x1 << 29) /* no sparse tx descr. */
+ | (0x1 << 28) /* no sparse rx descr. */
+ | (0x1 << 23) | (0x1 << 24) /* descriptor coherency */
+ | (0x1 << 21) | (0x1 << 22) /* data coherency */
+ | (0x1 << 17)
+ | 0x1dff,
+ GXCFG);
+
+#if defined(CONFIG_SMP)
+# error No SMP support
+#else
+ /* All interrupts go to core #0 only. */
+ titan_writel(0x1f007fff, CPDST0A);
+ titan_writel(0x00000000, CPDST0B);
+ titan_writel(0x0000ff3f, CPDST1A);
+ titan_writel(0x00000000, CPDST1B);
+ titan_writel(0x00ffffff, CPXDSTA);
+ titan_writel(0x00000000, CPXDSTB);
+#endif
+
+ /* Enable DUART interrupts, disable everything else. */
+ titan_writel(0x04000000, CPGIG0ER);
+ titan_writel(0x000000c0, CPGIG1ER);
+
+ excite_procfs_init();
+ return 0;
+}
+
+void __init plat_setup(void)
+{
+ volatile u32 * const boot_ocd_base = (u32 *) 0xbf7fc000;
+
+ /* Announce RAM to system */
+ add_memory_region(0x00000000, memsize, BOOT_MEM_RAM);
+
+ /* Set up timer initialization hooks */
+ board_time_init = excite_timer_init;
+ board_timer_setup = excite_timer_setup;
+
+ /* Set up the peripheral address map */
+ *(boot_ocd_base + (LKB9 / sizeof (u32))) = 0;
+ *(boot_ocd_base + (LKB10 / sizeof (u32))) = 0;
+ *(boot_ocd_base + (LKB11 / sizeof (u32))) = 0;
+ *(boot_ocd_base + (LKB12 / sizeof (u32))) = 0;
+ wmb();
+ *(boot_ocd_base + (LKB0 / sizeof (u32))) = EXCITE_PHYS_OCD >> 4;
+ wmb();
+
+ ocd_writel((EXCITE_PHYS_TITAN >> 4) | 0x1UL, LKB5);
+ ocd_writel(((EXCITE_SIZE_TITAN >> 4) & 0x7fffff00) - 0x100, LKM5);
+ ocd_writel((EXCITE_PHYS_SCRAM >> 4) | 0x1UL, LKB13);
+ ocd_writel(((EXCITE_SIZE_SCRAM >> 4) & 0xffffff00) - 0x100, LKM13);
+
+ /* Local bus slot #0 */
+ ocd_writel(0x00040510, LDP0);
+ ocd_writel((EXCITE_PHYS_BOOTROM >> 4) | 0x1UL, LKB9);
+ ocd_writel(((EXCITE_SIZE_BOOTROM >> 4) & 0x03ffff00) - 0x100, LKM9);
+
+ /* Local bus slot #2 */
+ ocd_writel(0x00000330, LDP2);
+ ocd_writel((EXCITE_PHYS_FPGA >> 4) | 0x1, LKB11);
+ ocd_writel(((EXCITE_SIZE_FPGA >> 4) - 0x100) & 0x03ffff00, LKM11);
+
+ /* Local bus slot #3 */
+ ocd_writel(0x00123413, LDP3);
+ ocd_writel((EXCITE_PHYS_NAND >> 4) | 0x1, LKB12);
+ ocd_writel(((EXCITE_SIZE_NAND >> 4) - 0x100) & 0x03ffff00, LKM12);
+}
+
+
+
+console_initcall(excite_init_console);
+arch_initcall(excite_platform_init);
+
+EXPORT_SYMBOL(titan_lock);
+EXPORT_SYMBOL(titan_irqflags);
+EXPORT_SYMBOL(titan_irq);
+EXPORT_SYMBOL(ocd_base);
+EXPORT_SYMBOL(titan_base);
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-27 13:42:33 +0000