diff options
Diffstat (limited to 'arch/mips/alchemy/gpr/board_setup.c')
| -rw-r--r-- | arch/mips/alchemy/gpr/board_setup.c | 93 |
1 files changed, 93 insertions, 0 deletions
diff --git a/arch/mips/alchemy/gpr/board_setup.c b/arch/mips/alchemy/gpr/board_setup.c new file mode 100644 index 00000000000..ad2e3f13793 --- /dev/null +++ b/arch/mips/alchemy/gpr/board_setup.c @@ -0,0 +1,93 @@ +/* + * Copyright 2010 Wolfgang Grandegger <wg@denx.de> + * + * Copyright 2000-2003, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/pm.h> + +#include <asm/reboot.h> +#include <asm/mach-au1x00/au1000.h> + +#include <prom.h> + +#define UART1_ADDR KSEG1ADDR(UART1_PHYS_ADDR) +#define UART3_ADDR KSEG1ADDR(UART3_PHYS_ADDR) + +char irq_tab_alchemy[][5] __initdata = { + [0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, +}; + +static void gpr_reset(char *c) +{ + /* switch System-LED to orange (red# and green# on) */ + alchemy_gpio_direction_output(4, 0); + alchemy_gpio_direction_output(5, 0); + + /* trigger watchdog to reset board in 200ms */ + printk(KERN_EMERG "Triggering watchdog soft reset...\n"); + raw_local_irq_disable(); + alchemy_gpio_direction_output(1, 0); + udelay(1); + alchemy_gpio_set_value(1, 1); + while (1) + cpu_wait(); +} + +static void gpr_power_off(void) +{ + while (1) + cpu_wait(); +} + +void __init board_setup(void) +{ + printk(KERN_INFO "Tarpeze ITS GPR board\n"); + + pm_power_off = gpr_power_off; + _machine_halt = gpr_power_off; + _machine_restart = gpr_reset; + + /* Enable UART3 */ + au_writel(0x1, UART3_ADDR + UART_MOD_CNTRL);/* clock enable (CE) */ + au_writel(0x3, UART3_ADDR + UART_MOD_CNTRL); /* CE and "enable" */ + /* Enable UART1 */ + au_writel(0x1, UART1_ADDR + UART_MOD_CNTRL); /* clock enable (CE) */ + au_writel(0x3, UART1_ADDR + UART_MOD_CNTRL); /* CE and "enable" */ + + /* Take away Reset of UMTS-card */ + alchemy_gpio_direction_output(215, 1); + +#ifdef CONFIG_PCI +#if defined(__MIPSEB__) + au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG); +#else + au_writel(0xf, Au1500_PCI_CFG); +#endif +#endif +} |