diff options
Diffstat (limited to 'arch/mips/alchemy/devboards')
26 files changed, 1717 insertions, 0 deletions
diff --git a/arch/mips/alchemy/devboards/Makefile b/arch/mips/alchemy/devboards/Makefile new file mode 100644 index 00000000000..a98126bf147 --- /dev/null +++ b/arch/mips/alchemy/devboards/Makefile @@ -0,0 +1,16 @@ +# +# Alchemy Develboards +# + +obj-$(CONFIG_MIPS_PB1000) += pb1000/ +obj-$(CONFIG_MIPS_PB1100) += pb1100/ +obj-$(CONFIG_MIPS_PB1200) += pb1200/ +obj-$(CONFIG_MIPS_PB1500) += pb1500/ +obj-$(CONFIG_MIPS_PB1550) += pb1550/ +obj-$(CONFIG_MIPS_DB1000) += db1x00/ +obj-$(CONFIG_MIPS_DB1100) += db1x00/ +obj-$(CONFIG_MIPS_DB1200) += pb1200/ +obj-$(CONFIG_MIPS_DB1500) += db1x00/ +obj-$(CONFIG_MIPS_DB1550) += db1x00/ +obj-$(CONFIG_MIPS_BOSPORUS) += db1x00/ +obj-$(CONFIG_MIPS_MIRAGE) += db1x00/ diff --git a/arch/mips/alchemy/devboards/db1x00/Makefile b/arch/mips/alchemy/devboards/db1x00/Makefile new file mode 100644 index 00000000000..274db3b55d8 --- /dev/null +++ b/arch/mips/alchemy/devboards/db1x00/Makefile @@ -0,0 +1,8 @@ +# +# Copyright 2000, 2008 MontaVista Software Inc. +# Author: MontaVista Software, Inc. <source@mvista.com> +# +# Makefile for the Alchemy Semiconductor DBAu1xx0 boards. +# + +lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c new file mode 100644 index 00000000000..9e5ccbbfced --- /dev/null +++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c @@ -0,0 +1,108 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Alchemy Db1x00 board setup. + * + * Copyright 2000, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> + +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-db1x00/db1x00.h> + +static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; + +void board_reset(void) +{ + /* Hit BCSR.SW_RESET[RESET] */ + bcsr->swreset = 0x0000; +} + +void __init board_setup(void) +{ + u32 pin_func = 0; + + /* Not valid for Au1550 */ +#if defined(CONFIG_IRDA) && \ + (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100)) + /* Set IRFIRSEL instead of GPIO15 */ + pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF; + au_writel(pin_func, SYS_PINFUNC); + /* Power off until the driver is in use */ + bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK; + bcsr->resets |= BCSR_RESETS_IRDA_MODE_OFF; + au_sync(); +#endif + bcsr->pcmcia = 0x0000; /* turn off PCMCIA power */ + +#ifdef CONFIG_MIPS_MIRAGE + /* Enable GPIO[31:0] inputs */ + au_writel(0, SYS_PININPUTEN); + + /* GPIO[20] is output, tristate the other input primary GPIOs */ + au_writel(~(1 << 20), SYS_TRIOUTCLR); + + /* Set GPIO[210:208] instead of SSI_0 */ + pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0; + + /* Set GPIO[215:211] for LEDs */ + pin_func |= 5 << 2; + + /* Set GPIO[214:213] for more LEDs */ + pin_func |= 5 << 12; + + /* Set GPIO[207:200] instead of PCMCIA/LCD */ + pin_func |= SYS_PF_LCD | SYS_PF_PC; + au_writel(pin_func, SYS_PINFUNC); + + /* + * Enable speaker amplifier. This should + * be part of the audio driver. + */ + au_writel(au_readl(GPIO2_DIR) | 0x200, GPIO2_DIR); + au_writel(0x02000200, GPIO2_OUTPUT); +#endif + + au_sync(); + +#ifdef CONFIG_MIPS_DB1000 + printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n"); +#endif +#ifdef CONFIG_MIPS_DB1500 + printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n"); +#endif +#ifdef CONFIG_MIPS_DB1100 + printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n"); +#endif +#ifdef CONFIG_MIPS_BOSPORUS + printk(KERN_INFO "AMD Alchemy Bosporus Board\n"); +#endif +#ifdef CONFIG_MIPS_MIRAGE + printk(KERN_INFO "AMD Alchemy Mirage Board\n"); +#endif +#ifdef CONFIG_MIPS_DB1550 + printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n"); +#endif +} diff --git a/arch/mips/alchemy/devboards/db1x00/init.c b/arch/mips/alchemy/devboards/db1x00/init.c new file mode 100644 index 00000000000..d91d334797c --- /dev/null +++ b/arch/mips/alchemy/devboards/db1x00/init.c @@ -0,0 +1,62 @@ +/* + * BRIEF MODULE DESCRIPTION + * PB1000 board setup + * + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/kernel.h> + +#include <asm/bootinfo.h> + +#include <prom.h> + +const char *get_system_type(void) +{ +#ifdef CONFIG_MIPS_BOSPORUS + return "Alchemy Bosporus Gateway Reference"; +#else + return "Alchemy Db1x00"; +#endif +} + +void __init prom_init(void) +{ + unsigned char *memsize_str; + unsigned long memsize; + + prom_argc = fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; + + prom_init_cmdline(); + + memsize_str = prom_getenv("memsize"); + if (!memsize_str) + memsize = 0x04000000; + else + strict_strtoul(memsize_str, 0, &memsize); + add_memory_region(0, memsize, BOOT_MEM_RAM); +} diff --git a/arch/mips/alchemy/devboards/db1x00/irqmap.c b/arch/mips/alchemy/devboards/db1x00/irqmap.c new file mode 100644 index 00000000000..94c090e8bf7 --- /dev/null +++ b/arch/mips/alchemy/devboards/db1x00/irqmap.c @@ -0,0 +1,86 @@ +/* + * BRIEF MODULE DESCRIPTION + * Au1xxx irq map table + * + * Copyright 2003 Embedded Edge, LLC + * dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> + +#include <asm/mach-au1x00/au1000.h> + +#ifdef CONFIG_MIPS_DB1500 +char irq_tab_alchemy[][5] __initdata = { + [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT371 */ + [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */ +}; +#endif + +#ifdef CONFIG_MIPS_BOSPORUS +char irq_tab_alchemy[][5] __initdata = { + [11] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 11 - miniPCI */ + [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - SN1741 */ + [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */ +}; +#endif + +#ifdef CONFIG_MIPS_MIRAGE +char irq_tab_alchemy[][5] __initdata = { + [11] = { -1, INTD, INTX, INTX, INTX }, /* IDSEL 11 - SMI VGX */ + [12] = { -1, INTX, INTX, INTC, INTX }, /* IDSEL 12 - PNX1300 */ + [13] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 13 - miniPCI */ +}; +#endif + +#ifdef CONFIG_MIPS_DB1550 +char irq_tab_alchemy[][5] __initdata = { + [11] = { -1, INTC, INTX, INTX, INTX }, /* IDSEL 11 - on-board HPT371 */ + [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */ + [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */ +}; +#endif + + +struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { + +#ifndef CONFIG_MIPS_MIRAGE +#ifdef CONFIG_MIPS_DB1550 + { AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 IRQ# */ + { AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 IRQ# */ +#else + { AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 Fully_Interted# */ + { AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 STSCHG# */ + { AU1000_GPIO_2, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 IRQ# */ + + { AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 Fully_Interted# */ + { AU1000_GPIO_4, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 STSCHG# */ + { AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 IRQ# */ +#endif +#else + { AU1000_GPIO_7, INTC_INT_RISE_EDGE, 0 }, /* touchscreen pen down */ +#endif + +}; + +int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); diff --git a/arch/mips/alchemy/devboards/pb1000/Makefile b/arch/mips/alchemy/devboards/pb1000/Makefile new file mode 100644 index 00000000000..99bbec0ca41 --- /dev/null +++ b/arch/mips/alchemy/devboards/pb1000/Makefile @@ -0,0 +1,8 @@ +# +# Copyright 2000, 2008 MontaVista Software Inc. +# Author: MontaVista Software, Inc. <source@mvista.com> +# +# Makefile for the Alchemy Semiconductor Pb1000 board. +# + +lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/alchemy/devboards/pb1000/board_setup.c b/arch/mips/alchemy/devboards/pb1000/board_setup.c new file mode 100644 index 00000000000..25df167a95b --- /dev/null +++ b/arch/mips/alchemy/devboards/pb1000/board_setup.c @@ -0,0 +1,165 @@ +/* + * Copyright 2000, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/delay.h> + +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-pb1x00/pb1000.h> + +void board_reset(void) +{ +} + +void __init board_setup(void) +{ + u32 pin_func, static_cfg0; + u32 sys_freqctrl, sys_clksrc; + u32 prid = read_c0_prid(); + + /* Set AUX clock to 12 MHz * 8 = 96 MHz */ + au_writel(8, SYS_AUXPLL); + au_writel(0, SYS_PINSTATERD); + udelay(100); + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + /* Zero and disable FREQ2 */ + sys_freqctrl = au_readl(SYS_FREQCTRL0); + sys_freqctrl &= ~0xFFF00000; + au_writel(sys_freqctrl, SYS_FREQCTRL0); + + /* Zero and disable USBH/USBD clocks */ + sys_clksrc = au_readl(SYS_CLKSRC); + sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK | + SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK); + au_writel(sys_clksrc, SYS_CLKSRC); + + sys_freqctrl = au_readl(SYS_FREQCTRL0); + sys_freqctrl &= ~0xFFF00000; + + sys_clksrc = au_readl(SYS_CLKSRC); + sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK | + SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK); + + switch (prid & 0x000000FF) { + case 0x00: /* DA */ + case 0x01: /* HA */ + case 0x02: /* HB */ + /* CPU core freq to 48 MHz to slow it way down... */ + au_writel(4, SYS_CPUPLL); + + /* + * Setup 48 MHz FREQ2 from CPUPLL for USB Host + * FRDIV2 = 3 -> div by 8 of 384 MHz -> 48 MHz + */ + sys_freqctrl |= (3 << SYS_FC_FRDIV2_BIT) | SYS_FC_FE2; + au_writel(sys_freqctrl, SYS_FREQCTRL0); + + /* CPU core freq to 384 MHz */ + au_writel(0x20, SYS_CPUPLL); + + printk(KERN_INFO "Au1000: 48 MHz OHCI workaround enabled\n"); + break; + + default: /* HC and newer */ + /* FREQ2 = aux / 2 = 48 MHz */ + sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) | + SYS_FC_FE2 | SYS_FC_FS2; + au_writel(sys_freqctrl, SYS_FREQCTRL0); + break; + } + + /* + * Route 48 MHz FREQ2 into USB Host and/or Device + */ + sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MUH_BIT; + au_writel(sys_clksrc, SYS_CLKSRC); + + /* Configure pins GPIO[14:9] as GPIO */ + pin_func = au_readl(SYS_PINFUNC) & ~(SYS_PF_UR3 | SYS_PF_USB); + + /* 2nd USB port is USB host */ + pin_func |= SYS_PF_USB; + + au_writel(pin_func, SYS_PINFUNC); + au_writel(0x2800, SYS_TRIOUTCLR); + au_writel(0x0030, SYS_OUTPUTCLR); +#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ + + /* Make GPIO 15 an input (for interrupt line) */ + pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_IRF; + /* We don't need I2S, so make it available for GPIO[31:29] */ + pin_func |= SYS_PF_I2S; + au_writel(pin_func, SYS_PINFUNC); + + au_writel(0x8000, SYS_TRIOUTCLR); + + static_cfg0 = au_readl(MEM_STCFG0) & ~0xc00; + au_writel(static_cfg0, MEM_STCFG0); + + /* configure RCE2* for LCD */ + au_writel(0x00000004, MEM_STCFG2); + + /* MEM_STTIME2 */ + au_writel(0x09000000, MEM_STTIME2); + + /* Set 32-bit base address decoding for RCE2* */ + au_writel(0x10003ff0, MEM_STADDR2); + + /* + * PCI CPLD setup + * Expand CE0 to cover PCI + */ + au_writel(0x11803e40, MEM_STADDR1); + + /* Burst visibility on */ + au_writel(au_readl(MEM_STCFG0) | 0x1000, MEM_STCFG0); + + au_writel(0x83, MEM_STCFG1); /* ewait enabled, flash timing */ + au_writel(0x33030a10, MEM_STTIME1); /* slower timing for FPGA */ + + /* Setup the static bus controller */ + au_writel(0x00000002, MEM_STCFG3); /* type = PCMCIA */ + au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */ + au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */ + + /* + * Enable Au1000 BCLK switching - note: sed1356 must not use + * its BCLK (Au1000 LCLK) for any timings + */ + switch (prid & 0x000000FF) { + case 0x00: /* DA */ + case 0x01: /* HA */ + case 0x02: /* HB */ + break; + default: /* HC and newer */ + /* + * Enable sys bus clock divider when IDLE state or no bus + * activity. + */ + au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL); + break; + } +} diff --git a/arch/mips/alchemy/devboards/pb1000/init.c b/arch/mips/alchemy/devboards/pb1000/init.c new file mode 100644 index 00000000000..640055b8ac6 --- /dev/null +++ b/arch/mips/alchemy/devboards/pb1000/init.c @@ -0,0 +1,57 @@ +/* + * BRIEF MODULE DESCRIPTION + * Pb1000 board setup + * + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/kernel.h> + +#include <asm/bootinfo.h> + +#include <prom.h> + +const char *get_system_type(void) +{ + return "Alchemy Pb1000"; +} + +void __init prom_init(void) +{ + unsigned char *memsize_str; + unsigned long memsize; + + prom_argc = (int)fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; + + prom_init_cmdline(); + memsize_str = prom_getenv("memsize"); + if (!memsize_str) + memsize = 0x04000000; + else + strict_strtoul(memsize_str, 0, &memsize); + add_memory_region(0, memsize, BOOT_MEM_RAM); +} diff --git a/arch/mips/alchemy/devboards/pb1000/irqmap.c b/arch/mips/alchemy/devboards/pb1000/irqmap.c new file mode 100644 index 00000000000..b3d56b0af32 --- /dev/null +++ b/arch/mips/alchemy/devboards/pb1000/irqmap.c @@ -0,0 +1,38 @@ +/* + * BRIEF MODULE DESCRIPTION + * Au1xxx irq map table + * + * Copyright 2003 Embedded Edge, LLC + * dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/interrupt.h> + +#include <asm/mach-au1x00/au1000.h> + +struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { + { AU1000_GPIO_15, INTC_INT_LOW_LEVEL, 0 }, +}; + +int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); diff --git a/arch/mips/alchemy/devboards/pb1100/Makefile b/arch/mips/alchemy/devboards/pb1100/Makefile new file mode 100644 index 00000000000..793e97c49e4 --- /dev/null +++ b/arch/mips/alchemy/devboards/pb1100/Makefile @@ -0,0 +1,8 @@ +# +# Copyright 2000, 2001, 2008 MontaVista Software Inc. +# Author: MontaVista Software, Inc. <source@mvista.com> +# +# Makefile for the Alchemy Semiconductor Pb1100 board. +# + +lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/alchemy/devboards/pb1100/board_setup.c b/arch/mips/alchemy/devboards/pb1100/board_setup.c new file mode 100644 index 00000000000..c0bfd59a7a3 --- /dev/null +++ b/arch/mips/alchemy/devboards/pb1100/board_setup.c @@ -0,0 +1,109 @@ +/* + * Copyright 2002, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/delay.h> + +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-pb1x00/pb1100.h> + +void board_reset(void) +{ + /* Hit BCSR.RST_VDDI[SOFT_RESET] */ + au_writel(0x00000000, PB1100_RST_VDDI); +} + +void __init board_setup(void) +{ + volatile void __iomem *base = (volatile void __iomem *)0xac000000UL; + + /* Set AUX clock to 12 MHz * 8 = 96 MHz */ + au_writel(8, SYS_AUXPLL); + au_writel(0, SYS_PININPUTEN); + udelay(100); + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + { + u32 pin_func, sys_freqctrl, sys_clksrc; + + /* Configure pins GPIO[14:9] as GPIO */ + pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3; + + /* Zero and disable FREQ2 */ + sys_freqctrl = au_readl(SYS_FREQCTRL0); + sys_freqctrl &= ~0xFFF00000; + au_writel(sys_freqctrl, SYS_FREQCTRL0); + + /* Zero and disable USBH/USBD/IrDA clock */ + sys_clksrc = au_readl(SYS_CLKSRC); + sys_clksrc &= ~(SYS_CS_CIR | SYS_CS_DIR | SYS_CS_MIR_MASK); + au_writel(sys_clksrc, SYS_CLKSRC); + + sys_freqctrl = au_readl(SYS_FREQCTRL0); + sys_freqctrl &= ~0xFFF00000; + + sys_clksrc = au_readl(SYS_CLKSRC); + sys_clksrc &= ~(SYS_CS_CIR | SYS_CS_DIR | SYS_CS_MIR_MASK); + + /* FREQ2 = aux / 2 = 48 MHz */ + sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) | + SYS_FC_FE2 | SYS_FC_FS2; + au_writel(sys_freqctrl, SYS_FREQCTRL0); + + /* + * Route 48 MHz FREQ2 into USBH/USBD/IrDA + */ + sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MIR_BIT; + au_writel(sys_clksrc, SYS_CLKSRC); + + /* Setup the static bus controller */ + au_writel(0x00000002, MEM_STCFG3); /* type = PCMCIA */ + au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */ + au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */ + + /* + * Get USB Functionality pin state (device vs host drive pins). + */ + pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_USB; + /* 2nd USB port is USB host. */ + pin_func |= SYS_PF_USB; + au_writel(pin_func, SYS_PINFUNC); + } +#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ + + /* Enable sys bus clock divider when IDLE state or no bus activity. */ + au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL); + + /* Enable the RTC if not already enabled. */ + if (!(readb(base + 0x28) & 0x20)) { + writeb(readb(base + 0x28) | 0x20, base + 0x28); + au_sync(); + } + /* Put the clock in BCD mode. */ + if (readb(base + 0x2C) & 0x4) { /* reg B */ + writeb(readb(base + 0x2c) & ~0x4, base + 0x2c); + au_sync(); + } +} diff --git a/arch/mips/alchemy/devboards/pb1100/init.c b/arch/mips/alchemy/devboards/pb1100/init.c new file mode 100644 index 00000000000..d34fbd8cc93 --- /dev/null +++ b/arch/mips/alchemy/devboards/pb1100/init.c @@ -0,0 +1,60 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Pb1100 board setup + * + * Copyright 2002, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/kernel.h> + +#include <asm/bootinfo.h> + +#include <prom.h> + +const char *get_system_type(void) +{ + return "Alchemy Pb1100"; +} + +void __init prom_init(void) +{ + unsigned char *memsize_str; + unsigned long memsize; + + prom_argc = fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg3; + + prom_init_cmdline(); + + memsize_str = prom_getenv("memsize"); + if (!memsize_str) + memsize = 0x04000000; + else + strict_strtoul(memsize_str, 0, &memsize); + + add_memory_region(0, memsize, BOOT_MEM_RAM); +} diff --git a/arch/mips/alchemy/devboards/pb1100/irqmap.c b/arch/mips/alchemy/devboards/pb1100/irqmap.c new file mode 100644 index 00000000000..9b7dd8b4128 --- /dev/null +++ b/arch/mips/alchemy/devboards/pb1100/irqmap.c @@ -0,0 +1,40 @@ +/* + * BRIEF MODULE DESCRIPTION + * Au1xx0 IRQ map table + * + * Copyright 2003 Embedded Edge, LLC + * dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> + +#include <asm/mach-au1x00/au1000.h> + +struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { + { AU1000_GPIO_9, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card Fully_Inserted# */ + { AU1000_GPIO_10, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card STSCHG# */ + { AU1000_GPIO_11, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card IRQ# */ + { AU1000_GPIO_13, INTC_INT_LOW_LEVEL, 0 }, /* DC_IRQ# */ +}; + +int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); diff --git a/arch/mips/alchemy/devboards/pb1200/Makefile b/arch/mips/alchemy/devboards/pb1200/Makefile new file mode 100644 index 00000000000..d678adf7ce8 --- /dev/null +++ b/arch/mips/alchemy/devboards/pb1200/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the Alchemy Semiconductor Pb1200/DBAu1200 boards. +# + +lib-y := init.o board_setup.o irqmap.o +obj-y += platform.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/alchemy/devboards/pb1200/board_setup.c b/arch/mips/alchemy/devboards/pb1200/board_setup.c new file mode 100644 index 00000000000..6cb2115059a --- /dev/null +++ b/arch/mips/alchemy/devboards/pb1200/board_setup.c @@ -0,0 +1,162 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Alchemy Pb1200/Db1200 board setup. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/sched.h> + +#include <prom.h> +#include <au1xxx.h> + +extern void _board_init_irq(void); +extern void (*board_init_irq)(void); + +void board_reset(void) +{ + bcsr->resets = 0; + bcsr->system = 0; +} + +void __init board_setup(void) +{ + char *argptr = NULL; + +#if 0 + { + u32 pin_func; + + /* + * Enable PSC1 SYNC for AC97. Normaly done in audio driver, + * but it is board specific code, so put it here. + */ + pin_func = au_readl(SYS_PINFUNC); + au_sync(); + pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; + au_writel(pin_func, SYS_PINFUNC); + + au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */ + au_sync(); + } +#endif + +#if defined(CONFIG_I2C_AU1550) + { + u32 freq0, clksrc; + u32 pin_func; + + /* Select SMBus in CPLD */ + bcsr->resets &= ~BCSR_RESETS_PCS0MUX; + + pin_func = au_readl(SYS_PINFUNC); + au_sync(); + pin_func &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B); + /* Set GPIOs correctly */ + pin_func |= 2 << 17; + au_writel(pin_func, SYS_PINFUNC); + au_sync(); + + /* The I2C driver depends on 50 MHz clock */ + freq0 = au_readl(SYS_FREQCTRL0); + au_sync(); + freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1); + freq0 |= 3 << SYS_FC_FRDIV1_BIT; + /* 396 MHz / (3 + 1) * 2 == 49.5 MHz */ + au_writel(freq0, SYS_FREQCTRL0); + au_sync(); + freq0 |= SYS_FC_FE1; + au_writel(freq0, SYS_FREQCTRL0); + au_sync(); + + clksrc = au_readl(SYS_CLKSRC); + au_sync(); + clksrc &= ~(SYS_CS_CE0 | SYS_CS_DE0 | SYS_CS_ME0_MASK); + /* Bit 22 is EXTCLK0 for PSC0 */ + clksrc |= SYS_CS_MUX_FQ1 << SYS_CS_ME0_BIT; + au_writel(clksrc, SYS_CLKSRC); + au_sync(); + } +#endif + +#ifdef CONFIG_FB_AU1200 + argptr = prom_getcmdline(); +#ifdef CONFIG_MIPS_PB1200 + strcat(argptr, " video=au1200fb:panel:bs"); +#endif +#ifdef CONFIG_MIPS_DB1200 + strcat(argptr, " video=au1200fb:panel:bs"); +#endif +#endif + + /* + * The Pb1200 development board uses external MUX for PSC0 to + * support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI + */ +#ifdef CONFIG_I2C_AU1550 + bcsr->resets &= ~BCSR_RESETS_PCS0MUX; +#endif + au_sync(); + +#ifdef CONFIG_MIPS_PB1200 + printk(KERN_INFO "AMD Alchemy Pb1200 Board\n"); +#endif +#ifdef CONFIG_MIPS_DB1200 + printk(KERN_INFO "AMD Alchemy Db1200 Board\n"); +#endif + + /* Setup Pb1200 External Interrupt Controller */ + board_init_irq = _board_init_irq; +} + +int board_au1200fb_panel(void) +{ + BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; + int p; + + p = bcsr->switches; + p >>= 8; + p &= 0x0F; + return p; +} + +int board_au1200fb_panel_init(void) +{ + /* Apply power */ + BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; + + bcsr->board |= BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL; + /* printk(KERN_DEBUG "board_au1200fb_panel_init()\n"); */ + return 0; +} + +int board_au1200fb_panel_shutdown(void) +{ + /* Remove power */ + BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; + + bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | + BCSR_BOARD_LCDBL); + /* printk(KERN_DEBUG "board_au1200fb_panel_shutdown()\n"); */ + return 0; +} diff --git a/arch/mips/alchemy/devboards/pb1200/init.c b/arch/mips/alchemy/devboards/pb1200/init.c new file mode 100644 index 00000000000..edd9425fa32 --- /dev/null +++ b/arch/mips/alchemy/devboards/pb1200/init.c @@ -0,0 +1,58 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * PB1200 board setup + * + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/kernel.h> + +#include <asm/bootinfo.h> + +#include <prom.h> + +const char *get_system_type(void) +{ + return "Alchemy Pb1200"; +} + +void __init prom_init(void) +{ + unsigned char *memsize_str; + unsigned long memsize; + + prom_argc = (int)fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; + + prom_init_cmdline(); + memsize_str = prom_getenv("memsize"); + if (!memsize_str) + memsize = 0x08000000; + else + strict_strtoul(memsize_str, 0, &memsize); + add_memory_region(0, memsize, BOOT_MEM_RAM); +} diff --git a/arch/mips/alchemy/devboards/pb1200/irqmap.c b/arch/mips/alchemy/devboards/pb1200/irqmap.c new file mode 100644 index 00000000000..2a505ad8715 --- /dev/null +++ b/arch/mips/alchemy/devboards/pb1200/irqmap.c @@ -0,0 +1,160 @@ +/* + * BRIEF MODULE DESCRIPTION + * Au1xxx irq map table + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/interrupt.h> + +#include <asm/mach-au1x00/au1000.h> + +#ifdef CONFIG_MIPS_PB1200 +#include <asm/mach-pb1x00/pb1200.h> +#endif + +#ifdef CONFIG_MIPS_DB1200 +#include <asm/mach-db1x00/db1200.h> +#define PB1200_INT_BEGIN DB1200_INT_BEGIN +#define PB1200_INT_END DB1200_INT_END +#endif + +struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { + /* This is external interrupt cascade */ + { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 }, +}; + +int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); + +/* + * Support for External interrupts on the Pb1200 Development platform. + */ +static volatile int pb1200_cascade_en; + +irqreturn_t pb1200_cascade_handler(int irq, void *dev_id) +{ + unsigned short bisr = bcsr->int_status; + int extirq_nr = 0; + + /* Clear all the edge interrupts. This has no effect on level. */ + bcsr->int_status = bisr; + for ( ; bisr; bisr &= bisr - 1) { + extirq_nr = PB1200_INT_BEGIN + __ffs(bisr); + /* Ack and dispatch IRQ */ + do_IRQ(extirq_nr); + } + + return IRQ_RETVAL(1); +} + +inline void pb1200_enable_irq(unsigned int irq_nr) +{ + bcsr->intset_mask = 1 << (irq_nr - PB1200_INT_BEGIN); + bcsr->intset = 1 << (irq_nr - PB1200_INT_BEGIN); +} + +inline void pb1200_disable_irq(unsigned int irq_nr) +{ + bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN); + bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN); +} + +static unsigned int pb1200_setup_cascade(void) +{ + return request_irq(AU1000_GPIO_7, &pb1200_cascade_handler, + 0, "Pb1200 Cascade", &pb1200_cascade_handler); +} + +static unsigned int pb1200_startup_irq(unsigned int irq) +{ + if (++pb1200_cascade_en == 1) { + int res; + + res = pb1200_setup_cascade(); + if (res) + return res; + } + + pb1200_enable_irq(irq); + + return 0; +} + +static void pb1200_shutdown_irq(unsigned int irq) +{ + pb1200_disable_irq(irq); + if (--pb1200_cascade_en == 0) + free_irq(AU1000_GPIO_7, &pb1200_cascade_handler); +} + +static struct irq_chip external_irq_type = { +#ifdef CONFIG_MIPS_PB1200 + .name = "Pb1200 Ext", +#endif +#ifdef CONFIG_MIPS_DB1200 + .name = "Db1200 Ext", +#endif + .startup = pb1200_startup_irq, + .shutdown = pb1200_shutdown_irq, + .ack = pb1200_disable_irq, + .mask = pb1200_disable_irq, + .mask_ack = pb1200_disable_irq, + .unmask = pb1200_enable_irq, +}; + +void _board_init_irq(void) +{ + unsigned int irq; + +#ifdef CONFIG_MIPS_PB1200 + /* We have a problem with CPLD rev 3. */ + if (((bcsr->whoami & BCSR_WHOAMI_CPLD) >> 4) <= 3) { + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n"); + printk(KERN_ERR "updated to latest revision. This software will\n"); + printk(KERN_ERR "not work on anything less than CPLD rev 4.\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + panic("Game over. Your score is 0."); + } +#endif + + for (irq = PB1200_INT_BEGIN; irq <= PB1200_INT_END; irq++) { + set_irq_chip_and_handler(irq, &external_irq_type, + handle_level_irq); + pb1200_disable_irq(irq); + } + + /* + * GPIO_7 can not be hooked here, so it is hooked upon first + * request of any source attached to the cascade. + */ +} diff --git a/arch/mips/alchemy/devboards/pb1200/platform.c b/arch/mips/alchemy/devboards/pb1200/platform.c new file mode 100644 index 00000000000..95303297c53 --- /dev/null +++ b/arch/mips/alchemy/devboards/pb1200/platform.c @@ -0,0 +1,166 @@ +/* + * Pb1200/DBAu1200 board platform device registration + * + * Copyright (C) 2008 MontaVista Software Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/dma-mapping.h> +#include <linux/init.h> +#include <linux/leds.h> +#include <linux/platform_device.h> + +#include <asm/mach-au1x00/au1xxx.h> +#include <asm/mach-au1x00/au1100_mmc.h> + +static int mmc_activity; + +static void pb1200mmc0_set_power(void *mmc_host, int state) +{ + if (state) + bcsr->board |= BCSR_BOARD_SD0PWR; + else + bcsr->board &= ~BCSR_BOARD_SD0PWR; + + au_sync_delay(1); +} + +static int pb1200mmc0_card_readonly(void *mmc_host) +{ + return (bcsr->status & BCSR_STATUS_SD0WP) ? 1 : 0; +} + +static int pb1200mmc0_card_inserted(void *mmc_host) +{ + return (bcsr->sig_status & BCSR_INT_SD0INSERT) ? 1 : 0; +} + +static void pb1200_mmcled_set(struct led_classdev *led, + enum led_brightness brightness) +{ + if (brightness != LED_OFF) { + if (++mmc_activity == 1) + bcsr->disk_leds &= ~(1 << 8); + } else { + if (--mmc_activity == 0) + bcsr->disk_leds |= (1 << 8); + } +} + +static struct led_classdev pb1200mmc_led = { + .brightness_set = pb1200_mmcled_set, +}; + +#ifndef CONFIG_MIPS_DB1200 +static void pb1200mmc1_set_power(void *mmc_host, int state) +{ + if (state) + bcsr->board |= BCSR_BOARD_SD1PWR; + else + bcsr->board &= ~BCSR_BOARD_SD1PWR; + + au_sync_delay(1); +} + +static int pb1200mmc1_card_readonly(void *mmc_host) +{ + return (bcsr->status & BCSR_STATUS_SD1WP) ? 1 : 0; +} + +static int pb1200mmc1_card_inserted(void *mmc_host) +{ + return (bcsr->sig_status & BCSR_INT_SD1INSERT) ? 1 : 0; +} +#endif + +const struct au1xmmc_platform_data au1xmmc_platdata[2] = { + [0] = { + .set_power = pb1200mmc0_set_power, + .card_inserted = pb1200mmc0_card_inserted, + .card_readonly = pb1200mmc0_card_readonly, + .cd_setup = NULL, /* use poll-timer in driver */ + .led = &pb1200mmc_led, + }, +#ifndef CONFIG_MIPS_DB1200 + [1] = { + .set_power = pb1200mmc1_set_power, + .card_inserted = pb1200mmc1_card_inserted, + .card_readonly = pb1200mmc1_card_readonly, + .cd_setup = NULL, /* use poll-timer in driver */ + .led = &pb1200mmc_led, + }, +#endif +}; + +static struct resource ide_resources[] = { + [0] = { + .start = IDE_PHYS_ADDR, + .end = IDE_PHYS_ADDR + IDE_PHYS_LEN - 1, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = IDE_INT, + .end = IDE_INT, + .flags = IORESOURCE_IRQ + } +}; + +static u64 ide_dmamask = DMA_32BIT_MASK; + +static struct platform_device ide_device = { + .name = "au1200-ide", + .id = 0, + .dev = { + .dma_mask = &ide_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .num_resources = ARRAY_SIZE(ide_resources), + .resource = ide_resources +}; + +static struct resource smc91c111_resources[] = { + [0] = { + .name = "smc91x-regs", + .start = SMC91C111_PHYS_ADDR, + .end = SMC91C111_PHYS_ADDR + 0xf, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = SMC91C111_INT, + .end = SMC91C111_INT, + .flags = IORESOURCE_IRQ + }, +}; + +static struct platform_device smc91c111_device = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(smc91c111_resources), + .resource = smc91c111_resources +}; + +static struct platform_device *board_platform_devices[] __initdata = { + &ide_device, + &smc91c111_device +}; + +static int __init board_register_devices(void) +{ + return platform_add_devices(board_platform_devices, + ARRAY_SIZE(board_platform_devices)); +} + +arch_initcall(board_register_devices); diff --git a/arch/mips/alchemy/devboards/pb1500/Makefile b/arch/mips/alchemy/devboards/pb1500/Makefile new file mode 100644 index 00000000000..602f38df20b --- /dev/null +++ b/arch/mips/alchemy/devboards/pb1500/Makefile @@ -0,0 +1,8 @@ +# +# Copyright 2000, 2001, 2008 MontaVista Software Inc. +# Author: MontaVista Software, Inc. <source@mvista.com> +# +# Makefile for the Alchemy Semiconductor Pb1500 board. +# + +lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c new file mode 100644 index 00000000000..035771c6e5b --- /dev/null +++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c @@ -0,0 +1,119 @@ +/* + * Copyright 2000, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/delay.h> + +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-pb1x00/pb1500.h> + +void board_reset(void) +{ + /* Hit BCSR.RST_VDDI[SOFT_RESET] */ + au_writel(0x00000000, PB1500_RST_VDDI); +} + +void __init board_setup(void) +{ + u32 pin_func; + u32 sys_freqctrl, sys_clksrc; + + sys_clksrc = sys_freqctrl = pin_func = 0; + /* Set AUX clock to 12 MHz * 8 = 96 MHz */ + au_writel(8, SYS_AUXPLL); + au_writel(0, SYS_PINSTATERD); + udelay(100); + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + + /* GPIO201 is input for PCMCIA card detect */ + /* GPIO203 is input for PCMCIA interrupt request */ + au_writel(au_readl(GPIO2_DIR) & ~((1 << 1) | (1 << 3)), GPIO2_DIR); + + /* Zero and disable FREQ2 */ + sys_freqctrl = au_readl(SYS_FREQCTRL0); + sys_freqctrl &= ~0xFFF00000; + au_writel(sys_freqctrl, SYS_FREQCTRL0); + + /* zero and disable USBH/USBD clocks */ + sys_clksrc = au_readl(SYS_CLKSRC); + sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK | + SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK); + au_writel(sys_clksrc, SYS_CLKSRC); + + sys_freqctrl = au_readl(SYS_FREQCTRL0); + sys_freqctrl &= ~0xFFF00000; + + sys_clksrc = au_readl(SYS_CLKSRC); + sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK | + SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK); + + /* FREQ2 = aux/2 = 48 MHz */ + sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) | SYS_FC_FE2 | SYS_FC_FS2; + au_writel(sys_freqctrl, SYS_FREQCTRL0); + + /* + * Route 48MHz FREQ2 into USB Host and/or Device + */ + sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MUH_BIT; + au_writel(sys_clksrc, SYS_CLKSRC); + + pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_USB; + /* 2nd USB port is USB host */ + pin_func |= SYS_PF_USB; + au_writel(pin_func, SYS_PINFUNC); +#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */ + +#ifdef CONFIG_PCI + /* Setup PCI bus controller */ + au_writel(0, Au1500_PCI_CMEM); + au_writel(0x00003fff, Au1500_CFG_BASE); +#if defined(__MIPSEB__) + au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG); +#else + au_writel(0xf, Au1500_PCI_CFG); +#endif + au_writel(0xf0000000, Au1500_PCI_MWMASK_DEV); + au_writel(0, Au1500_PCI_MWBASE_REV_CCL); + au_writel(0x02a00356, Au1500_PCI_STATCMD); + au_writel(0x00003c04, Au1500_PCI_HDRTYPE); + au_writel(0x00000008, Au1500_PCI_MBAR); + au_sync(); +#endif + + /* Enable sys bus clock divider when IDLE state or no bus activity. */ + au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL); + + /* Enable the RTC if not already enabled */ + if (!(au_readl(0xac000028) & 0x20)) { + printk(KERN_INFO "enabling clock ...\n"); + au_writel((au_readl(0xac000028) | 0x20), 0xac000028); + } + /* Put the clock in BCD mode */ + if (au_readl(0xac00002c) & 0x4) { /* reg B */ + au_writel(au_readl(0xac00002c) & ~0x4, 0xac00002c); + au_sync(); + } +} diff --git a/arch/mips/alchemy/devboards/pb1500/init.c b/arch/mips/alchemy/devboards/pb1500/init.c new file mode 100644 index 00000000000..b73343b9dba --- /dev/null +++ b/arch/mips/alchemy/devboards/pb1500/init.c @@ -0,0 +1,58 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Pb1500 board setup + * + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/kernel.h> + +#include <asm/bootinfo.h> + +#include <prom.h> + +const char *get_system_type(void) +{ + return "Alchemy Pb1500"; +} + +void __init prom_init(void) +{ + unsigned char *memsize_str; + unsigned long memsize; + + prom_argc = (int)fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; + + prom_init_cmdline(); + memsize_str = prom_getenv("memsize"); + if (!memsize_str) + memsize = 0x04000000; + else + strict_strtoul(memsize_str, 0, &memsize); + add_memory_region(0, memsize, BOOT_MEM_RAM); +} diff --git a/arch/mips/alchemy/devboards/pb1500/irqmap.c b/arch/mips/alchemy/devboards/pb1500/irqmap.c new file mode 100644 index 00000000000..39c4682766a --- /dev/null +++ b/arch/mips/alchemy/devboards/pb1500/irqmap.c @@ -0,0 +1,46 @@ +/* + * BRIEF MODULE DESCRIPTION + * Au1xxx irq map table + * + * Copyright 2003 Embedded Edge, LLC + * dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> + +#include <asm/mach-au1x00/au1000.h> + +char irq_tab_alchemy[][5] __initdata = { + [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT370 */ + [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */ +}; + +struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { + { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 }, + { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 }, + { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 }, +}; + +int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); diff --git a/arch/mips/alchemy/devboards/pb1550/Makefile b/arch/mips/alchemy/devboards/pb1550/Makefile new file mode 100644 index 00000000000..7d8beca87fa --- /dev/null +++ b/arch/mips/alchemy/devboards/pb1550/Makefile @@ -0,0 +1,8 @@ +# +# Copyright 2000, 2008 MontaVista Software Inc. +# Author: MontaVista Software, Inc. <source@mvista.com> +# +# Makefile for the Alchemy Semiconductor Pb1550 board. +# + +lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/alchemy/devboards/pb1550/board_setup.c b/arch/mips/alchemy/devboards/pb1550/board_setup.c new file mode 100644 index 00000000000..0ed76b64b6a --- /dev/null +++ b/arch/mips/alchemy/devboards/pb1550/board_setup.c @@ -0,0 +1,58 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Alchemy Pb1550 board setup. + * + * Copyright 2000, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> + +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-pb1x00/pb1550.h> + +void board_reset(void) +{ + /* Hit BCSR.SYSTEM[RESET] */ + au_writew(au_readw(0xAF00001C) & ~BCSR_SYSTEM_RESET, 0xAF00001C); +} + +void __init board_setup(void) +{ + u32 pin_func; + + /* + * Enable PSC1 SYNC for AC'97. Normaly done in audio driver, + * but it is board specific code, so put it here. + */ + pin_func = au_readl(SYS_PINFUNC); + au_sync(); + pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; + au_writel(pin_func, SYS_PINFUNC); + + au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */ + au_sync(); + + printk(KERN_INFO "AMD Alchemy Pb1550 Board\n"); +} diff --git a/arch/mips/alchemy/devboards/pb1550/init.c b/arch/mips/alchemy/devboards/pb1550/init.c new file mode 100644 index 00000000000..11e7f4acd48 --- /dev/null +++ b/arch/mips/alchemy/devboards/pb1550/init.c @@ -0,0 +1,58 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Pb1550 board setup + * + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/kernel.h> + +#include <asm/bootinfo.h> + +#include <prom.h> + +const char *get_system_type(void) +{ + return "Alchemy Pb1550"; +} + +void __init prom_init(void) +{ + unsigned char *memsize_str; + unsigned long memsize; + + prom_argc = (int)fw_arg0; + prom_argv = (char **)fw_arg1; + prom_envp = (char **)fw_arg2; + + prom_init_cmdline(); + memsize_str = prom_getenv("memsize"); + if (!memsize_str) + memsize = 0x08000000; + else + strict_strtoul(memsize_str, 0, &memsize); + add_memory_region(0, memsize, BOOT_MEM_RAM); +} diff --git a/arch/mips/alchemy/devboards/pb1550/irqmap.c b/arch/mips/alchemy/devboards/pb1550/irqmap.c new file mode 100644 index 00000000000..a02a4d1fa89 --- /dev/null +++ b/arch/mips/alchemy/devboards/pb1550/irqmap.c @@ -0,0 +1,43 @@ +/* + * BRIEF MODULE DESCRIPTION + * Au1xx0 IRQ map table + * + * Copyright 2003 Embedded Edge, LLC + * dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> + +#include <asm/mach-au1x00/au1000.h> + +char irq_tab_alchemy[][5] __initdata = { + [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */ + [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */ +}; + +struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { + { AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 }, + { AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, +}; + +int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map); |