diff options
Diffstat (limited to 'arch/mips/alchemy/devboards/pb1500/board_setup.c')
| -rw-r--r-- | arch/mips/alchemy/devboards/pb1500/board_setup.c | 54 |
1 files changed, 21 insertions, 33 deletions
diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c index d7a56569e7e..fa9770ac358 100644 --- a/arch/mips/alchemy/devboards/pb1500/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c @@ -29,22 +29,14 @@ #include <linux/interrupt.h> #include <asm/mach-au1x00/au1000.h> -#include <asm/mach-pb1x00/pb1500.h> +#include <asm/mach-db1x00/bcsr.h> #include <prom.h> char irq_tab_alchemy[][5] __initdata = { - [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT370 */ - [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */ -}; - -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { - { AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 }, - { AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 }, - { AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 }, - { AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 }, - { AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 }, + [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT370 */ + [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */ }; @@ -55,35 +47,16 @@ const char *get_system_type(void) void board_reset(void) { - /* Hit BCSR.RST_VDDI[SOFT_RESET] */ - au_writel(0x00000000, PB1500_RST_VDDI); -} - -void __init board_init_irq(void) -{ - au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map)); + bcsr_write(BCSR_SYSTEM, 0); } void __init board_setup(void) { u32 pin_func; u32 sys_freqctrl, sys_clksrc; - char *argptr; - - argptr = prom_getcmdline(); -#ifdef CONFIG_SERIAL_8250_CONSOLE - argptr = strstr(argptr, "console="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } -#endif -#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000) - /* au1000 does not support vra, au1500 and au1100 do */ - strcat(argptr, " au1000_audio=vra"); - argptr = prom_getcmdline(); -#endif + bcsr_init(DB1000_BCSR_PHYS_ADDR, + DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS); sys_clksrc = sys_freqctrl = pin_func = 0; /* Set AUX clock to 12 MHz * 8 = 96 MHz */ @@ -163,3 +136,18 @@ void __init board_setup(void) au_sync(); } } + +static int __init pb1500_init_irq(void) +{ + set_irq_type(AU1500_GPIO9_INT, IRQF_TRIGGER_LOW); /* CD0# */ + set_irq_type(AU1500_GPIO10_INT, IRQF_TRIGGER_LOW); /* CARD0 */ + set_irq_type(AU1500_GPIO11_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ + set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH); + set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW); + + return 0; +} +arch_initcall(pb1500_init_irq); |