diff options
Diffstat (limited to 'arch/mips/alchemy/devboards/pb1200/board_setup.c')
| -rw-r--r-- | arch/mips/alchemy/devboards/pb1200/board_setup.c | 96 |
1 files changed, 56 insertions, 40 deletions
diff --git a/arch/mips/alchemy/devboards/pb1200/board_setup.c b/arch/mips/alchemy/devboards/pb1200/board_setup.c index 94e6b7e7753..3184063f804 100644 --- a/arch/mips/alchemy/devboards/pb1200/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1200/board_setup.c @@ -25,11 +25,23 @@ */ #include <linux/init.h> +#include <linux/interrupt.h> #include <linux/sched.h> -#include <prom.h> -#include <au1xxx.h> +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-db1x00/bcsr.h> + +#ifdef CONFIG_MIPS_PB1200 +#include <asm/mach-pb1x00/pb1200.h> +#endif + +#ifdef CONFIG_MIPS_DB1200 +#include <asm/mach-db1x00/db1200.h> +#define PB1200_INT_BEGIN DB1200_INT_BEGIN +#define PB1200_INT_END DB1200_INT_END +#endif +#include <prom.h> const char *get_system_type(void) { @@ -38,25 +50,15 @@ const char *get_system_type(void) void board_reset(void) { - bcsr->resets = 0; - bcsr->system = 0; + bcsr_write(BCSR_RESETS, 0); + bcsr_write(BCSR_SYSTEM, 0); } void __init board_setup(void) { - char *argptr; - - argptr = prom_getcmdline(); -#ifdef CONFIG_SERIAL_8250_CONSOLE - argptr = strstr(argptr, "console="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } -#endif -#ifdef CONFIG_FB_AU1200 - strcat(argptr, " video=au1200fb:panel:bs"); -#endif + printk(KERN_INFO "AMD Alchemy Pb1200 Board\n"); + bcsr_init(PB1200_BCSR_PHYS_ADDR, + PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS); #if 0 { @@ -82,7 +84,7 @@ void __init board_setup(void) u32 pin_func; /* Select SMBus in CPLD */ - bcsr->resets &= ~BCSR_RESETS_PCS0MUX; + bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0); pin_func = au_readl(SYS_PINFUNC); au_sync(); @@ -116,38 +118,54 @@ void __init board_setup(void) /* * The Pb1200 development board uses external MUX for PSC0 to - * support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI + * support SMB/SPI. bcsr_resets bit 12: 0=SMB 1=SPI */ #ifdef CONFIG_I2C_AU1550 - bcsr->resets &= ~BCSR_RESETS_PCS0MUX; + bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0); #endif au_sync(); +} -#ifdef CONFIG_MIPS_PB1200 - printk(KERN_INFO "AMD Alchemy Pb1200 Board\n"); -#endif -#ifdef CONFIG_MIPS_DB1200 - printk(KERN_INFO "AMD Alchemy Db1200 Board\n"); -#endif +static int __init pb1200_init_irq(void) +{ + /* We have a problem with CPLD rev 3. */ + if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) { + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n"); + printk(KERN_ERR "updated to latest revision. This software will\n"); + printk(KERN_ERR "not work on anything less than CPLD rev 4.\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + panic("Game over. Your score is 0."); + } + + set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW); + bcsr_init_irq(PB1200_INT_BEGIN, PB1200_INT_END, AU1200_GPIO7_INT); + + return 0; } +arch_initcall(pb1200_init_irq); + int board_au1200fb_panel(void) { - BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; - int p; - - p = bcsr->switches; - p >>= 8; - p &= 0x0F; - return p; + return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f; } int board_au1200fb_panel_init(void) { /* Apply power */ - BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; - - bcsr->board |= BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL; + bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | + BCSR_BOARD_LCDBL); /* printk(KERN_DEBUG "board_au1200fb_panel_init()\n"); */ return 0; } @@ -155,10 +173,8 @@ int board_au1200fb_panel_init(void) int board_au1200fb_panel_shutdown(void) { /* Remove power */ - BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; - - bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | - BCSR_BOARD_LCDBL); + bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | + BCSR_BOARD_LCDBL, 0); /* printk(KERN_DEBUG "board_au1200fb_panel_shutdown()\n"); */ return 0; } |