diff options
Diffstat (limited to 'arch/mips/alchemy/devboards/pb1200/board_setup.c')
-rw-r--r-- | arch/mips/alchemy/devboards/pb1200/board_setup.c | 174 |
1 files changed, 0 insertions, 174 deletions
diff --git a/arch/mips/alchemy/devboards/pb1200/board_setup.c b/arch/mips/alchemy/devboards/pb1200/board_setup.c deleted file mode 100644 index 6d06b07c238..00000000000 --- a/arch/mips/alchemy/devboards/pb1200/board_setup.c +++ /dev/null @@ -1,174 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Alchemy Pb1200/Db1200 board setup. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/sched.h> - -#include <asm/mach-au1x00/au1000.h> -#include <asm/mach-db1x00/bcsr.h> - -#ifdef CONFIG_MIPS_PB1200 -#include <asm/mach-pb1x00/pb1200.h> -#endif - -#ifdef CONFIG_MIPS_DB1200 -#include <asm/mach-db1x00/db1200.h> -#define PB1200_INT_BEGIN DB1200_INT_BEGIN -#define PB1200_INT_END DB1200_INT_END -#endif - -#include <prom.h> - -const char *get_system_type(void) -{ - return "Alchemy Pb1200"; -} - -void __init board_setup(void) -{ - printk(KERN_INFO "AMD Alchemy Pb1200 Board\n"); - bcsr_init(PB1200_BCSR_PHYS_ADDR, - PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS); - -#if 0 - { - u32 pin_func; - - /* - * Enable PSC1 SYNC for AC97. Normaly done in audio driver, - * but it is board specific code, so put it here. - */ - pin_func = au_readl(SYS_PINFUNC); - au_sync(); - pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; - au_writel(pin_func, SYS_PINFUNC); - - au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */ - au_sync(); - } -#endif - -#if defined(CONFIG_I2C_AU1550) - { - u32 freq0, clksrc; - u32 pin_func; - - /* Select SMBus in CPLD */ - bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0); - - pin_func = au_readl(SYS_PINFUNC); - au_sync(); - pin_func &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B); - /* Set GPIOs correctly */ - pin_func |= 2 << 17; - au_writel(pin_func, SYS_PINFUNC); - au_sync(); - - /* The I2C driver depends on 50 MHz clock */ - freq0 = au_readl(SYS_FREQCTRL0); - au_sync(); - freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1); - freq0 |= 3 << SYS_FC_FRDIV1_BIT; - /* 396 MHz / (3 + 1) * 2 == 49.5 MHz */ - au_writel(freq0, SYS_FREQCTRL0); - au_sync(); - freq0 |= SYS_FC_FE1; - au_writel(freq0, SYS_FREQCTRL0); - au_sync(); - - clksrc = au_readl(SYS_CLKSRC); - au_sync(); - clksrc &= ~(SYS_CS_CE0 | SYS_CS_DE0 | SYS_CS_ME0_MASK); - /* Bit 22 is EXTCLK0 for PSC0 */ - clksrc |= SYS_CS_MUX_FQ1 << SYS_CS_ME0_BIT; - au_writel(clksrc, SYS_CLKSRC); - au_sync(); - } -#endif - - /* - * The Pb1200 development board uses external MUX for PSC0 to - * support SMB/SPI. bcsr_resets bit 12: 0=SMB 1=SPI - */ -#ifdef CONFIG_I2C_AU1550 - bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0); -#endif - au_sync(); -} - -static int __init pb1200_init_irq(void) -{ - /* We have a problem with CPLD rev 3. */ - if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) { - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n"); - printk(KERN_ERR "updated to latest revision. This software will\n"); - printk(KERN_ERR "not work on anything less than CPLD rev 4.\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - panic("Game over. Your score is 0."); - } - - irq_set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW); - bcsr_init_irq(PB1200_INT_BEGIN, PB1200_INT_END, AU1200_GPIO7_INT); - - return 0; -} -arch_initcall(pb1200_init_irq); - - -int board_au1200fb_panel(void) -{ - return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f; -} - -int board_au1200fb_panel_init(void) -{ - /* Apply power */ - bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | - BCSR_BOARD_LCDBL); - /* printk(KERN_DEBUG "board_au1200fb_panel_init()\n"); */ - return 0; -} - -int board_au1200fb_panel_shutdown(void) -{ - /* Remove power */ - bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | - BCSR_BOARD_LCDBL, 0); - /* printk(KERN_DEBUG "board_au1200fb_panel_shutdown()\n"); */ - return 0; -} |