aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/alchemy/common
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/alchemy/common')
-rw-r--r--arch/mips/alchemy/common/Makefile7
-rw-r--r--arch/mips/alchemy/common/clocks.c7
-rw-r--r--arch/mips/alchemy/common/dbdma.c295
-rw-r--r--arch/mips/alchemy/common/dma.c36
-rw-r--r--arch/mips/alchemy/common/gpiolib-au1000.c10
-rw-r--r--arch/mips/alchemy/common/irq.c604
-rw-r--r--arch/mips/alchemy/common/platform.c160
-rw-r--r--arch/mips/alchemy/common/power.c28
-rw-r--r--arch/mips/alchemy/common/prom.c28
-rw-r--r--arch/mips/alchemy/common/puts.c68
-rw-r--r--arch/mips/alchemy/common/reset.c188
-rw-r--r--arch/mips/alchemy/common/setup.c40
-rw-r--r--arch/mips/alchemy/common/sleeper.S81
-rw-r--r--arch/mips/alchemy/common/time.c35
14 files changed, 751 insertions, 836 deletions
diff --git a/arch/mips/alchemy/common/Makefile b/arch/mips/alchemy/common/Makefile
index b67fb512529..06c0e65a54b 100644
--- a/arch/mips/alchemy/common/Makefile
+++ b/arch/mips/alchemy/common/Makefile
@@ -5,14 +5,15 @@
# Makefile for the Alchemy Au1xx0 CPUs, generic files.
#
-obj-y += prom.o irq.o puts.o time.o reset.o \
- clocks.o platform.o power.o setup.o \
+obj-y += prom.o time.o clocks.o platform.o power.o setup.o \
sleeper.o dma.o dbdma.o
+obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += irq.o
+
# optional gpiolib support
ifeq ($(CONFIG_ALCHEMY_GPIO_INDIRECT),)
ifeq ($(CONFIG_GPIOLIB),y)
- obj-$(CONFIG_ALCHEMY_GPIO_AU1000) += gpiolib-au1000.o
+ obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += gpiolib-au1000.o
endif
endif
diff --git a/arch/mips/alchemy/common/clocks.c b/arch/mips/alchemy/common/clocks.c
index d8991854530..460c6285c1b 100644
--- a/arch/mips/alchemy/common/clocks.c
+++ b/arch/mips/alchemy/common/clocks.c
@@ -40,8 +40,6 @@
static unsigned int au1x00_clock; /* Hz */
static unsigned long uart_baud_base;
-static DEFINE_SPINLOCK(time_lock);
-
/*
* Set the au1000_clock
*/
@@ -84,9 +82,6 @@ void set_au1x00_uart_baud_base(unsigned long new_baud_base)
unsigned long au1xxx_calc_clock(void)
{
unsigned long cpu_speed;
- unsigned long flags;
-
- spin_lock_irqsave(&time_lock, flags);
/*
* On early Au1000, sys_cpupll was write-only. Since these
@@ -108,8 +103,6 @@ unsigned long au1xxx_calc_clock(void)
set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)
& 0x03) + 2) * 16));
- spin_unlock_irqrestore(&time_lock, flags);
-
set_au1x00_speed(cpu_speed);
return cpu_speed;
diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c
index 5c68569344c..ca0506a8585 100644
--- a/arch/mips/alchemy/common/dbdma.c
+++ b/arch/mips/alchemy/common/dbdma.c
@@ -30,11 +30,13 @@
*
*/
+#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/sysdev.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>
@@ -58,7 +60,6 @@ static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock);
static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE;
static int dbdma_initialized;
-static void au1xxx_dbdma_init(void);
static dbdev_tab_t dbdev_tab[] = {
#ifdef CONFIG_SOC_AU1550
@@ -174,10 +175,6 @@ static dbdev_tab_t dbdev_tab[] = {
#define DBDEV_TAB_SIZE ARRAY_SIZE(dbdev_tab)
-#ifdef CONFIG_PM
-static u32 au1xxx_dbdma_pm_regs[NUM_DBDMA_CHANS + 1][6];
-#endif
-
static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS];
@@ -237,7 +234,7 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
void (*callback)(int, void *), void *callparam)
{
unsigned long flags;
- u32 used, chan, rv;
+ u32 used, chan;
u32 dcp;
int i;
dbdev_tab_t *stp, *dtp;
@@ -250,8 +247,7 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
* which can't be done successfully during board set up.
*/
if (!dbdma_initialized)
- au1xxx_dbdma_init();
- dbdma_initialized = 1;
+ return 0;
stp = find_dbdev_id(srcid);
if (stp == NULL)
@@ -261,7 +257,6 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
return 0;
used = 0;
- rv = 0;
/* Check to see if we can get both channels. */
spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
@@ -282,63 +277,65 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
used++;
spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
- if (!used) {
- /* Let's see if we can allocate a channel for it. */
- ctp = NULL;
- chan = 0;
- spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
- for (i = 0; i < NUM_DBDMA_CHANS; i++)
- if (chan_tab_ptr[i] == NULL) {
- /*
- * If kmalloc fails, it is caught below same
- * as a channel not available.
- */
- ctp = kmalloc(sizeof(chan_tab_t), GFP_ATOMIC);
- chan_tab_ptr[i] = ctp;
- break;
- }
- spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
-
- if (ctp != NULL) {
- memset(ctp, 0, sizeof(chan_tab_t));
- ctp->chan_index = chan = i;
- dcp = DDMA_CHANNEL_BASE;
- dcp += (0x0100 * chan);
- ctp->chan_ptr = (au1x_dma_chan_t *)dcp;
- cp = (au1x_dma_chan_t *)dcp;
- ctp->chan_src = stp;
- ctp->chan_dest = dtp;
- ctp->chan_callback = callback;
- ctp->chan_callparam = callparam;
-
- /* Initialize channel configuration. */
- i = 0;
- if (stp->dev_intlevel)
- i |= DDMA_CFG_SED;
- if (stp->dev_intpolarity)
- i |= DDMA_CFG_SP;
- if (dtp->dev_intlevel)
- i |= DDMA_CFG_DED;
- if (dtp->dev_intpolarity)
- i |= DDMA_CFG_DP;
- if ((stp->dev_flags & DEV_FLAGS_SYNC) ||
- (dtp->dev_flags & DEV_FLAGS_SYNC))
- i |= DDMA_CFG_SYNC;
- cp->ddma_cfg = i;
- au_sync();
+ if (used)
+ return 0;
- /* Return a non-zero value that can be used to
- * find the channel information in subsequent
- * operations.
+ /* Let's see if we can allocate a channel for it. */
+ ctp = NULL;
+ chan = 0;
+ spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
+ for (i = 0; i < NUM_DBDMA_CHANS; i++)
+ if (chan_tab_ptr[i] == NULL) {
+ /*
+ * If kmalloc fails, it is caught below same
+ * as a channel not available.
*/
- rv = (u32)(&chan_tab_ptr[chan]);
- } else {
- /* Release devices */
- stp->dev_flags &= ~DEV_FLAGS_INUSE;
- dtp->dev_flags &= ~DEV_FLAGS_INUSE;
+ ctp = kmalloc(sizeof(chan_tab_t), GFP_ATOMIC);
+ chan_tab_ptr[i] = ctp;
+ break;
}
+ spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
+
+ if (ctp != NULL) {
+ memset(ctp, 0, sizeof(chan_tab_t));
+ ctp->chan_index = chan = i;
+ dcp = DDMA_CHANNEL_BASE;
+ dcp += (0x0100 * chan);
+ ctp->chan_ptr = (au1x_dma_chan_t *)dcp;
+ cp = (au1x_dma_chan_t *)dcp;
+ ctp->chan_src = stp;
+ ctp->chan_dest = dtp;
+ ctp->chan_callback = callback;
+ ctp->chan_callparam = callparam;
+
+ /* Initialize channel configuration. */
+ i = 0;
+ if (stp->dev_intlevel)
+ i |= DDMA_CFG_SED;
+ if (stp->dev_intpolarity)
+ i |= DDMA_CFG_SP;
+ if (dtp->dev_intlevel)
+ i |= DDMA_CFG_DED;
+ if (dtp->dev_intpolarity)
+ i |= DDMA_CFG_DP;
+ if ((stp->dev_flags & DEV_FLAGS_SYNC) ||
+ (dtp->dev_flags & DEV_FLAGS_SYNC))
+ i |= DDMA_CFG_SYNC;
+ cp->ddma_cfg = i;
+ au_sync();
+
+ /*
+ * Return a non-zero value that can be used to find the channel
+ * information in subsequent operations.
+ */
+ return (u32)(&chan_tab_ptr[chan]);
}
- return rv;
+
+ /* Release devices */
+ stp->dev_flags &= ~DEV_FLAGS_INUSE;
+ dtp->dev_flags &= ~DEV_FLAGS_INUSE;
+
+ return 0;
}
EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc);
@@ -412,8 +409,11 @@ u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
if (desc_base == 0)
return 0;
+ ctp->cdb_membase = desc_base;
desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t));
- }
+ } else
+ ctp->cdb_membase = desc_base;
+
dp = (au1x_ddma_desc_t *)desc_base;
/* Keep track of the base descriptor. */
@@ -569,7 +569,7 @@ EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc);
* This updates the source pointer and byte count. Normally used
* for memory to fifo transfers.
*/
-u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
+u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags)
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
@@ -595,7 +595,7 @@ u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
return 0;
/* Load up buffer address and byte count. */
- dp->dscr_source0 = virt_to_phys(buf);
+ dp->dscr_source0 = buf & ~0UL;
dp->dscr_cmd1 = nbytes;
/* Check flags */
if (flags & DDMA_FLAGS_IE)
@@ -622,14 +622,13 @@ u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
/* Return something non-zero. */
return nbytes;
}
-EXPORT_SYMBOL(_au1xxx_dbdma_put_source);
+EXPORT_SYMBOL(au1xxx_dbdma_put_source);
/* Put a destination buffer into the DMA ring.
* This updates the destination pointer and byte count. Normally used
* to place an empty buffer into the ring for fifo to memory transfers.
*/
-u32
-_au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags)
+u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags)
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
@@ -659,7 +658,7 @@ _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags)
if (flags & DDMA_FLAGS_NOIE)
dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
- dp->dscr_dest0 = virt_to_phys(buf);
+ dp->dscr_dest0 = buf & ~0UL;
dp->dscr_cmd1 = nbytes;
#if 0
printk(KERN_DEBUG "cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
@@ -685,7 +684,7 @@ _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags)
/* Return something non-zero. */
return nbytes;
}
-EXPORT_SYMBOL(_au1xxx_dbdma_put_dest);
+EXPORT_SYMBOL(au1xxx_dbdma_put_dest);
/*
* Get a destination buffer into the DMA ring.
@@ -831,7 +830,7 @@ void au1xxx_dbdma_chan_free(u32 chanid)
au1xxx_dbdma_stop(chanid);
- kfree((void *)ctp->chan_desc_base);
+ kfree((void *)ctp->cdb_membase);
stp->dev_flags &= ~DEV_FLAGS_INUSE;
dtp->dev_flags &= ~DEV_FLAGS_INUSE;
@@ -868,28 +867,6 @@ static irqreturn_t dbdma_interrupt(int irq, void *dev_id)
return IRQ_RETVAL(1);
}
-static void au1xxx_dbdma_init(void)
-{
- int irq_nr;
-
- dbdma_gptr->ddma_config = 0;
- dbdma_gptr->ddma_throttle = 0;
- dbdma_gptr->ddma_inten = 0xffff;
- au_sync();
-
-#if defined(CONFIG_SOC_AU1550)
- irq_nr = AU1550_DDMA_INT;
-#elif defined(CONFIG_SOC_AU1200)
- irq_nr = AU1200_DDMA_INT;
-#else
- #error Unknown Au1x00 SOC
-#endif
-
- if (request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED,
- "Au1xxx dbdma", (void *)dbdma_gptr))
- printk(KERN_ERR "Can't get 1550 dbdma irq");
-}
-
void au1xxx_dbdma_dump(u32 chanid)
{
chan_tab_t *ctp;
@@ -903,7 +880,7 @@ void au1xxx_dbdma_dump(u32 chanid)
dtp = ctp->chan_dest;
cp = ctp->chan_ptr;
- printk(KERN_DEBUG "Chan %x, stp %x (dev %d) dtp %x (dev %d) \n",
+ printk(KERN_DEBUG "Chan %x, stp %x (dev %d) dtp %x (dev %d)\n",
(u32)ctp, (u32)stp, stp - dbdev_tab, (u32)dtp,
dtp - dbdev_tab);
printk(KERN_DEBUG "desc base %x, get %x, put %x, cur %x\n",
@@ -980,29 +957,37 @@ u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr)
return nbytes;
}
-#ifdef CONFIG_PM
-void au1xxx_dbdma_suspend(void)
+
+struct alchemy_dbdma_sysdev {
+ struct sys_device sysdev;
+ u32 pm_regs[NUM_DBDMA_CHANS + 1][6];
+};
+
+static int alchemy_dbdma_suspend(struct sys_device *dev,
+ pm_message_t state)
{
+ struct alchemy_dbdma_sysdev *sdev =
+ container_of(dev, struct alchemy_dbdma_sysdev, sysdev);
int i;
u32 addr;
addr = DDMA_GLOBAL_BASE;
- au1xxx_dbdma_pm_regs[0][0] = au_readl(addr + 0x00);
- au1xxx_dbdma_pm_regs[0][1] = au_readl(addr + 0x04);
- au1xxx_dbdma_pm_regs[0][2] = au_readl(addr + 0x08);
- au1xxx_dbdma_pm_regs[0][3] = au_readl(addr + 0x0c);
+ sdev->pm_regs[0][0] = au_readl(addr + 0x00);
+ sdev->pm_regs[0][1] = au_readl(addr + 0x04);
+ sdev->pm_regs[0][2] = au_readl(addr + 0x08);
+ sdev->pm_regs[0][3] = au_readl(addr + 0x0c);
/* save channel configurations */
for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) {
- au1xxx_dbdma_pm_regs[i][0] = au_readl(addr + 0x00);
- au1xxx_dbdma_pm_regs[i][1] = au_readl(addr + 0x04);
- au1xxx_dbdma_pm_regs[i][2] = au_readl(addr + 0x08);
- au1xxx_dbdma_pm_regs[i][3] = au_readl(addr + 0x0c);
- au1xxx_dbdma_pm_regs[i][4] = au_readl(addr + 0x10);
- au1xxx_dbdma_pm_regs[i][5] = au_readl(addr + 0x14);
+ sdev->pm_regs[i][0] = au_readl(addr + 0x00);
+ sdev->pm_regs[i][1] = au_readl(addr + 0x04);
+ sdev->pm_regs[i][2] = au_readl(addr + 0x08);
+ sdev->pm_regs[i][3] = au_readl(addr + 0x0c);
+ sdev->pm_regs[i][4] = au_readl(addr + 0x10);
+ sdev->pm_regs[i][5] = au_readl(addr + 0x14);
/* halt channel */
- au_writel(au1xxx_dbdma_pm_regs[i][0] & ~1, addr + 0x00);
+ au_writel(sdev->pm_regs[i][0] & ~1, addr + 0x00);
au_sync();
while (!(au_readl(addr + 0x14) & 1))
au_sync();
@@ -1012,30 +997,102 @@ void au1xxx_dbdma_suspend(void)
/* disable channel interrupts */
au_writel(0, DDMA_GLOBAL_BASE + 0x0c);
au_sync();
+
+ return 0;
}
-void au1xxx_dbdma_resume(void)
+static int alchemy_dbdma_resume(struct sys_device *dev)
{
+ struct alchemy_dbdma_sysdev *sdev =
+ container_of(dev, struct alchemy_dbdma_sysdev, sysdev);
int i;
u32 addr;
addr = DDMA_GLOBAL_BASE;
- au_writel(au1xxx_dbdma_pm_regs[0][0], addr + 0x00);
- au_writel(au1xxx_dbdma_pm_regs[0][1], addr + 0x04);
- au_writel(au1xxx_dbdma_pm_regs[0][2], addr + 0x08);
- au_writel(au1xxx_dbdma_pm_regs[0][3], addr + 0x0c);
+ au_writel(sdev->pm_regs[0][0], addr + 0x00);
+ au_writel(sdev->pm_regs[0][1], addr + 0x04);
+ au_writel(sdev->pm_regs[0][2], addr + 0x08);
+ au_writel(sdev->pm_regs[0][3], addr + 0x0c);
/* restore channel configurations */
for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) {
- au_writel(au1xxx_dbdma_pm_regs[i][0], addr + 0x00);
- au_writel(au1xxx_dbdma_pm_regs[i][1], addr + 0x04);
- au_writel(au1xxx_dbdma_pm_regs[i][2], addr + 0x08);
- au_writel(au1xxx_dbdma_pm_regs[i][3], addr + 0x0c);
- au_writel(au1xxx_dbdma_pm_regs[i][4], addr + 0x10);
- au_writel(au1xxx_dbdma_pm_regs[i][5], addr + 0x14);
+ au_writel(sdev->pm_regs[i][0], addr + 0x00);
+ au_writel(sdev->pm_regs[i][1], addr + 0x04);
+ au_writel(sdev->pm_regs[i][2], addr + 0x08);
+ au_writel(sdev->pm_regs[i][3], addr + 0x0c);
+ au_writel(sdev->pm_regs[i][4], addr + 0x10);
+ au_writel(sdev->pm_regs[i][5], addr + 0x14);
au_sync();
addr += 0x100; /* next channel base */
}
+
+ return 0;
+}
+
+static struct sysdev_class alchemy_dbdma_sysdev_class = {
+ .name = "dbdma",
+ .suspend = alchemy_dbdma_suspend,
+ .resume = alchemy_dbdma_resume,
+};
+
+static int __init alchemy_dbdma_sysdev_init(void)
+{
+ struct alchemy_dbdma_sysdev *sdev;
+ int ret;
+
+ ret = sysdev_class_register(&alchemy_dbdma_sysdev_class);
+ if (ret)
+ return ret;
+
+ sdev = kzalloc(sizeof(struct alchemy_dbdma_sysdev), GFP_KERNEL);
+ if (!sdev)
+ return -ENOMEM;
+
+ sdev->sysdev.id = -1;
+ sdev->sysdev.cls = &alchemy_dbdma_sysdev_class;
+ ret = sysdev_register(&sdev->sysdev);
+ if (ret)
+ kfree(sdev);
+
+ return ret;
+}
+
+static int __init au1xxx_dbdma_init(void)
+{
+ int irq_nr, ret;
+
+ dbdma_gptr->ddma_config = 0;
+ dbdma_gptr->ddma_throttle = 0;
+ dbdma_gptr->ddma_inten = 0xffff;
+ au_sync();
+
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1550:
+ irq_nr = AU1550_DDMA_INT;
+ break;
+ case ALCHEMY_CPU_AU1200:
+ irq_nr = AU1200_DDMA_INT;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ ret = request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED,
+ "Au1xxx dbdma", (void *)dbdma_gptr);
+ if (ret)
+ printk(KERN_ERR "Cannot grab DBDMA interrupt!\n");
+ else {
+ dbdma_initialized = 1;
+ printk(KERN_INFO "Alchemy DBDMA initialized\n");
+ ret = alchemy_dbdma_sysdev_init();
+ if (ret) {
+ printk(KERN_ERR "DBDMA PM init failed\n");
+ ret = 0;
+ }
+ }
+
+ return ret;
}
-#endif /* CONFIG_PM */
+subsys_initcall(au1xxx_dbdma_init);
+
#endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */
diff --git a/arch/mips/alchemy/common/dma.c b/arch/mips/alchemy/common/dma.c
index d6fbda232e6..d5278877891 100644
--- a/arch/mips/alchemy/common/dma.c
+++ b/arch/mips/alchemy/common/dma.c
@@ -29,6 +29,8 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
+
+#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
@@ -188,17 +190,14 @@ int request_au1000_dma(int dev_id, const char *dev_str,
dev = &dma_dev_table[dev_id];
if (irqhandler) {
- chan->irq = AU1000_DMA_INT_BASE + i;
chan->irq_dev = irq_dev_id;
ret = request_irq(chan->irq, irqhandler, irqflags, dev_str,
chan->irq_dev);
if (ret) {
- chan->irq = 0;
chan->irq_dev = NULL;
return ret;
}
} else {
- chan->irq = 0;
chan->irq_dev = NULL;
}
@@ -226,13 +225,40 @@ void free_au1000_dma(unsigned int dmanr)
}
disable_dma(dmanr);
- if (chan->irq)
+ if (chan->irq_dev)
free_irq(chan->irq, chan->irq_dev);
- chan->irq = 0;
chan->irq_dev = NULL;
chan->dev_id = -1;
}
EXPORT_SYMBOL(free_au1000_dma);
+static int __init au1000_dma_init(void)
+{
+ int base, i;
+
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1000:
+ base = AU1000_DMA_INT_BASE;
+ break;
+ case ALCHEMY_CPU_AU1500:
+ base = AU1500_DMA_INT_BASE;
+ break;
+ case ALCHEMY_CPU_AU1100:
+ base = AU1100_DMA_INT_BASE;
+ break;
+ default:
+ goto out;
+ }
+
+ for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++)
+ au1000_dma_table[i].irq = base + i;
+
+ printk(KERN_INFO "Alchemy DMA initialized\n");
+
+out:
+ return 0;
+}
+arch_initcall(au1000_dma_init);
+
#endif /* AU1000 AU1500 AU1100 */
diff --git a/arch/mips/alchemy/common/gpiolib-au1000.c b/arch/mips/alchemy/common/gpiolib-au1000.c
index 1bfa91f939f..c8e1a94d4a9 100644
--- a/arch/mips/alchemy/common/gpiolib-au1000.c
+++ b/arch/mips/alchemy/common/gpiolib-au1000.c
@@ -36,7 +36,6 @@
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/gpio.h>
-#if !defined(CONFIG_SOC_AU1000)
static int gpio2_get(struct gpio_chip *chip, unsigned offset)
{
return alchemy_gpio2_get_value(offset + ALCHEMY_GPIO2_BASE);
@@ -63,7 +62,7 @@ static int gpio2_to_irq(struct gpio_chip *chip, unsigned offset)
{
return alchemy_gpio2_to_irq(offset + ALCHEMY_GPIO2_BASE);
}
-#endif /* !defined(CONFIG_SOC_AU1000) */
+
static int gpio1_get(struct gpio_chip *chip, unsigned offset)
{
@@ -104,7 +103,6 @@ struct gpio_chip alchemy_gpio_chip[] = {
.base = ALCHEMY_GPIO1_BASE,
.ngpio = ALCHEMY_GPIO1_NUM,
},
-#if !defined(CONFIG_SOC_AU1000)
[1] = {
.label = "alchemy-gpio2",
.direction_input = gpio2_direction_input,
@@ -115,15 +113,13 @@ struct gpio_chip alchemy_gpio_chip[] = {
.base = ALCHEMY_GPIO2_BASE,
.ngpio = ALCHEMY_GPIO2_NUM,
},
-#endif
};
static int __init alchemy_gpiolib_init(void)
{
gpiochip_add(&alchemy_gpio_chip[0]);
-#if !defined(CONFIG_SOC_AU1000)
- gpiochip_add(&alchemy_gpio_chip[1]);
-#endif
+ if (alchemy_get_cputype() != ALCHEMY_CPU_AU1000)
+ gpiochip_add(&alchemy_gpio_chip[1]);
return 0;
}
diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c
index d670928afcf..9f78ada83b3 100644
--- a/arch/mips/alchemy/common/irq.c
+++ b/arch/mips/alchemy/common/irq.c
@@ -29,6 +29,8 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/sysdev.h>
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
@@ -39,253 +41,181 @@
static int au1x_ic_settype(unsigned int irq, unsigned int flow_type);
+/* NOTE on interrupt priorities: The original writers of this code said:
+ *
+ * Because of the tight timing of SETUP token to reply transactions,
+ * the USB devices-side packet complete interrupt (USB_DEV_REQ_INT)
+ * needs the highest priority.
+ */
+
/* per-processor fixed function irqs */
-struct au1xxx_irqmap au1xxx_ic0_map[] __initdata = {
-
-#if defined(CONFIG_SOC_AU1000)
- { AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
- { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
- { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
-
-#elif defined(CONFIG_SOC_AU1500)
-
- { AU1500_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 },
- { AU1000_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 },
- { AU1500_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 },
- { AU1000_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 },
- { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
- { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
- { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1500_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1500_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
-
-#elif defined(CONFIG_SOC_AU1100)
-
- { AU1100_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1100_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1100_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1100_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
- { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+struct au1xxx_irqmap {
+ int im_irq;
+ int im_type;
+ int im_request; /* set 1 to get higher priority */
+};
+
+struct au1xxx_irqmap au1000_irqmap[] __initdata = {
+ { AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
+ { AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 },
{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
- { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1100_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1100_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
-
-#elif defined(CONFIG_SOC_AU1550)
-
- { AU1550_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1550_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 },
- { AU1550_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 },
- { AU1550_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1550_CRYPTO_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1550_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 },
- { AU1550_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 },
- { AU1550_PCI_RST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
- { AU1550_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1550_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1550_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1550_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1550_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1550_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
- { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1550_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1550_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
- { AU1550_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1550_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-
-#elif defined(CONFIG_SOC_AU1200)
-
- { AU1200_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1200_SWT_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1200_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1200_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1200_MAE_BE_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1200_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1200_MAE_FE_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1200_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1200_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1200_AES_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1200_CAMERA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
- { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1200_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1200_USB_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1200_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1200_MAE_BOTH_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-
-#else
-#error "Error: Unknown Alchemy SOC"
-#endif
+ { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { -1, },
};
+struct au1xxx_irqmap au1500_irqmap[] __initdata = {
+ { AU1500_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1500_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1500_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1500_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1500_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1500_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1500_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1500_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1500_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1500_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1500_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1500_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1500_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1500_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1500_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1500_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1500_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1500_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1500_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1500_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1500_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1500_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
+ { AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 },
+ { AU1500_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1500_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1500_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1500_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1500_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1500_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { -1, },
+};
-#ifdef CONFIG_PM
+struct au1xxx_irqmap au1100_irqmap[] __initdata = {
+ { AU1100_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1100_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1100_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1100_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1100_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1100_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1100_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1100_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
+ { AU1100_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 },
+ { AU1100_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1100_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1100_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1100_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { -1, },
+};
-/*
- * Save/restore the interrupt controller state.
- * Called from the save/restore core registers as part of the
- * au_sleep function in power.c.....maybe I should just pm_register()
- * them instead?
- */
-static unsigned int sleep_intctl_config0[2];
-static unsigned int sleep_intctl_config1[2];
-static unsigned int sleep_intctl_config2[2];
-static unsigned int sleep_intctl_src[2];
-static unsigned int sleep_intctl_assign[2];
-static unsigned int sleep_intctl_wake[2];
-static unsigned int sleep_intctl_mask[2];
-
-void save_au1xxx_intctl(void)
-{
- sleep_intctl_config0[0] = au_readl(IC0_CFG0RD);
- sleep_intctl_config1[0] = au_readl(IC0_CFG1RD);
- sleep_intctl_config2[0] = au_readl(IC0_CFG2RD);
- sleep_intctl_src[0] = au_readl(IC0_SRCRD);
- sleep_intctl_assign[0] = au_readl(IC0_ASSIGNRD);
- sleep_intctl_wake[0] = au_readl(IC0_WAKERD);
- sleep_intctl_mask[0] = au_readl(IC0_MASKRD);
-
- sleep_intctl_config0[1] = au_readl(IC1_CFG0RD);
- sleep_intctl_config1[1] = au_readl(IC1_CFG1RD);
- sleep_intctl_config2[1] = au_readl(IC1_CFG2RD);
- sleep_intctl_src[1] = au_readl(IC1_SRCRD);
- sleep_intctl_assign[1] = au_readl(IC1_ASSIGNRD);
- sleep_intctl_wake[1] = au_readl(IC1_WAKERD);
- sleep_intctl_mask[1] = au_readl(IC1_MASKRD);
-}
+struct au1xxx_irqmap au1550_irqmap[] __initdata = {
+ { AU1550_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1550_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1550_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1550_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1550_CRYPTO_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1550_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1550_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1550_PCI_RST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1550_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1550_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1550_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1550_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1550_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1550_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1550_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1550_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1550_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1550_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1550_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1550_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1550_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1550_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
+ { AU1550_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 },
+ { AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1550_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1550_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1550_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { -1, },
+};
-/*
- * For most restore operations, we clear the entire register and
- * then set the bits we found during the save.
- */
-void restore_au1xxx_intctl(void)
-{
- au_writel(0xffffffff, IC0_MASKCLR); au_sync();
-
- au_writel(0xffffffff, IC0_CFG0CLR); au_sync();
- au_writel(sleep_intctl_config0[0], IC0_CFG0SET); au_sync();
- au_writel(0xffffffff, IC0_CFG1CLR); au_sync();
- au_writel(sleep_intctl_config1[0], IC0_CFG1SET); au_sync();
- au_writel(0xffffffff, IC0_CFG2CLR); au_sync();
- au_writel(sleep_intctl_config2[0], IC0_CFG2SET); au_sync();
- au_writel(0xffffffff, IC0_SRCCLR); au_sync();
- au_writel(sleep_intctl_src[0], IC0_SRCSET); au_sync();
- au_writel(0xffffffff, IC0_ASSIGNCLR); au_sync();
- au_writel(sleep_intctl_assign[0], IC0_ASSIGNSET); au_sync();
- au_writel(0xffffffff, IC0_WAKECLR); au_sync();
- au_writel(sleep_intctl_wake[0], IC0_WAKESET); au_sync();
- au_writel(0xffffffff, IC0_RISINGCLR); au_sync();
- au_writel(0xffffffff, IC0_FALLINGCLR); au_sync();
- au_writel(0x00000000, IC0_TESTBIT); au_sync();
-
- au_writel(0xffffffff, IC1_MASKCLR); au_sync();
-
- au_writel(0xffffffff, IC1_CFG0CLR); au_sync();
- au_writel(sleep_intctl_config0[1], IC1_CFG0SET); au_sync();
- au_writel(0xffffffff, IC1_CFG1CLR); au_sync();
- au_writel(sleep_intctl_config1[1], IC1_CFG1SET); au_sync();
- au_writel(0xffffffff, IC1_CFG2CLR); au_sync();
- au_writel(sleep_intctl_config2[1], IC1_CFG2SET); au_sync();
- au_writel(0xffffffff, IC1_SRCCLR); au_sync();
- au_writel(sleep_intctl_src[1], IC1_SRCSET); au_sync();
- au_writel(0xffffffff, IC1_ASSIGNCLR); au_sync();
- au_writel(sleep_intctl_assign[1], IC1_ASSIGNSET); au_sync();
- au_writel(0xffffffff, IC1_WAKECLR); au_sync();
- au_writel(sleep_intctl_wake[1], IC1_WAKESET); au_sync();
- au_writel(0xffffffff, IC1_RISINGCLR); au_sync();
- au_writel(0xffffffff, IC1_FALLINGCLR); au_sync();
- au_writel(0x00000000, IC1_TESTBIT); au_sync();
-
- au_writel(sleep_intctl_mask[1], IC1_MASKSET); au_sync();
-
- au_writel(sleep_intctl_mask[0], IC0_MASKSET); au_sync();
-}
-#endif /* CONFIG_PM */
+struct au1xxx_irqmap au1200_irqmap[] __initdata = {
+ { AU1200_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_SWT_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1200_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_MAE_BE_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_MAE_FE_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_AES_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_CAMERA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1200_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1200_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1200_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1200_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1200_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1200_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1200_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
+ { AU1200_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1200_USB_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_MAE_BOTH_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { -1, },
+};
static void au1x_ic0_unmask(unsigned int irq_nr)
@@ -306,7 +236,7 @@ static void au1x_ic1_unmask(unsigned int irq_nr)
* nowhere in the current kernel sources is it disabled. --mlau
*/
#if defined(CONFIG_MIPS_PB1000)
- if (irq_nr == AU1000_GPIO_15)
+ if (irq_nr == AU1000_GPIO15_INT)
au_writel(0x4000, PB1000_MDR); /* enable int */
#endif
au_sync();
@@ -378,11 +308,13 @@ static void au1x_ic1_maskack(unsigned int irq_nr)
static int au1x_ic1_setwake(unsigned int irq, unsigned int on)
{
- unsigned int bit = irq - AU1000_INTC1_INT_BASE;
+ int bit = irq - AU1000_INTC1_INT_BASE;
unsigned long wakemsk, flags;
- /* only GPIO 0-7 can act as wakeup source: */
- if ((irq < AU1000_GPIO_0) || (irq > AU1000_GPIO_7))
+ /* only GPIO 0-7 can act as wakeup source. Fortunately these
+ * are wired up identically on all supported variants.
+ */
+ if ((bit < 0) || (bit > 7))
return -EINVAL;
local_irq_save(flags);
@@ -504,11 +436,11 @@ static int au1x_ic_settype(unsigned int irq, unsigned int flow_type)
asmlinkage void plat_irq_dispatch(void)
{
unsigned int pending = read_c0_status() & read_c0_cause();
- unsigned long s, off, bit;
+ unsigned long s, off;
if (pending & CAUSEF_IP7) {
- do_IRQ(MIPS_CPU_IRQ_BASE + 7);
- return;
+ off = MIPS_CPU_IRQ_BASE + 7;
+ goto handle;
} else if (pending & CAUSEF_IP2) {
s = IC0_REQ0INT;
off = AU1000_INTC0_INT_BASE;
@@ -524,58 +456,20 @@ asmlinkage void plat_irq_dispatch(void)
} else
goto spurious;
- bit = 0;
s = au_readl(s);
if (unlikely(!s)) {
spurious:
spurious_interrupt();
return;
}
-#ifdef AU1000_USB_DEV_REQ_INT
- /*
- * Because of the tight timing of SETUP token to reply
- * transactions, the USB devices-side packet complete
- * interrupt needs the highest priority.
- */
- bit = 1 << (AU1000_USB_DEV_REQ_INT - AU1000_INTC0_INT_BASE);
- if ((pending & CAUSEF_IP2) && (s & bit)) {
- do_IRQ(AU1000_USB_DEV_REQ_INT);
- return;
- }
-#endif
- do_IRQ(__ffs(s) + off);
+ off += __ffs(s);
+handle:
+ do_IRQ(off);
}
-/* setup edge/level and assign request 0/1 */
-void __init au1xxx_setup_irqmap(struct au1xxx_irqmap *map, int count)
+static void __init au1000_init_irq(struct au1xxx_irqmap *map)
{
unsigned int bit, irq_nr;
-
- while (count--) {
- irq_nr = map[count].im_irq;
-
- if (((irq_nr < AU1000_INTC0_INT_BASE) ||
- (irq_nr >= AU1000_INTC0_INT_BASE + 32)) &&
- ((irq_nr < AU1000_INTC1_INT_BASE) ||
- (irq_nr >= AU1000_INTC1_INT_BASE + 32)))
- continue;
-
- if (irq_nr >= AU1000_INTC1_INT_BASE) {
- bit = irq_nr - AU1000_INTC1_INT_BASE;
- if (map[count].im_request)
- au_writel(1 << bit, IC1_ASSIGNCLR);
- } else {
- bit = irq_nr - AU1000_INTC0_INT_BASE;
- if (map[count].im_request)
- au_writel(1 << bit, IC0_ASSIGNCLR);
- }
-
- au1x_ic_settype(irq_nr, map[count].im_type);
- }
-}
-
-void __init arch_init_irq(void)
-{
int i;
/*
@@ -585,7 +479,7 @@ void __init arch_init_irq(void)
au_writel(0xffffffff, IC0_CFG1CLR);
au_writel(0xffffffff, IC0_CFG2CLR);
au_writel(0xffffffff, IC0_MASKCLR);
- au_writel(0xffffffff, IC0_ASSIGNSET);
+ au_writel(0xffffffff, IC0_ASSIGNCLR);
au_writel(0xffffffff, IC0_WAKECLR);
au_writel(0xffffffff, IC0_SRCSET);
au_writel(0xffffffff, IC0_FALLINGCLR);
@@ -596,7 +490,7 @@ void __init arch_init_irq(void)
au_writel(0xffffffff, IC1_CFG1CLR);
au_writel(0xffffffff, IC1_CFG2CLR);
au_writel(0xffffffff, IC1_MASKCLR);
- au_writel(0xffffffff, IC1_ASSIGNSET);
+ au_writel(0xffffffff, IC1_ASSIGNCLR);
au_writel(0xffffffff, IC1_WAKECLR);
au_writel(0xffffffff, IC1_SRCSET);
au_writel(0xffffffff, IC1_FALLINGCLR);
@@ -619,11 +513,131 @@ void __init arch_init_irq(void)
/*
* Initialize IC0, which is fixed per processor.
*/
- au1xxx_setup_irqmap(au1xxx_ic0_map, ARRAY_SIZE(au1xxx_ic0_map));
+ while (map->im_irq != -1) {
+ irq_nr = map->im_irq;
- /* Boards can register additional (GPIO-based) IRQs.
- */
- board_init_irq();
+ if (irq_nr >= AU1000_INTC1_INT_BASE) {
+ bit = irq_nr - AU1000_INTC1_INT_BASE;
+ if (map->im_request)
+ au_writel(1 << bit, IC1_ASSIGNSET);
+ } else {
+ bit = irq_nr - AU1000_INTC0_INT_BASE;
+ if (map->im_request)
+ au_writel(1 << bit, IC0_ASSIGNSET);
+ }
+
+ au1x_ic_settype(irq_nr, map->im_type);
+ ++map;
+ }
set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3);
}
+
+void __init arch_init_irq(void)
+{
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1000:
+ au1000_init_irq(au1000_irqmap);
+ break;
+ case ALCHEMY_CPU_AU1500:
+ au1000_init_irq(au1500_irqmap);
+ break;
+ case ALCHEMY_CPU_AU1100:
+ au1000_init_irq(au1100_irqmap);
+ break;
+ case ALCHEMY_CPU_AU1550:
+ au1000_init_irq(au1550_irqmap);
+ break;
+ case ALCHEMY_CPU_AU1200:
+ au1000_init_irq(au1200_irqmap);
+ break;
+ }
+}
+
+struct alchemy_ic_sysdev {
+ struct sys_device sysdev;
+ void __iomem *base;
+ unsigned long pmdata[7];
+};
+
+static int alchemy_ic_suspend(struct sys_device *dev, pm_message_t state)
+{
+ struct alchemy_ic_sysdev *icdev =
+ container_of(dev, struct alchemy_ic_sysdev, sysdev);
+
+ icdev->pmdata[0] = __raw_readl(icdev->base + IC_CFG0RD);
+ icdev->pmdata[1] = __raw_readl(icdev->base + IC_CFG1RD);
+ icdev->pmdata[2] = __raw_readl(icdev->base + IC_CFG2RD);
+ icdev->pmdata[3] = __raw_readl(icdev->base + IC_SRCRD);
+ icdev->pmdata[4] = __raw_readl(icdev->base + IC_ASSIGNRD);
+ icdev->pmdata[5] = __raw_readl(icdev->base + IC_WAKERD);
+ icdev->pmdata[6] = __raw_readl(icdev->base + IC_MASKRD);
+
+ return 0;
+}
+
+static int alchemy_ic_resume(struct sys_device *dev)
+{
+ struct alchemy_ic_sysdev *icdev =
+ container_of(dev, struct alchemy_ic_sysdev, sysdev);
+
+ __raw_writel(0xffffffff, icdev->base + IC_MASKCLR);
+ __raw_writel(0xffffffff, icdev->base + IC_CFG0CLR);
+ __raw_writel(0xffffffff, icdev->base + IC_CFG1CLR);
+ __raw_writel(0xffffffff, icdev->base + IC_CFG2CLR);
+ __raw_writel(0xffffffff, icdev->base + IC_SRCCLR);
+ __raw_writel(0xffffffff, icdev->base + IC_ASSIGNCLR);
+ __raw_writel(0xffffffff, icdev->base + IC_WAKECLR);
+ __raw_writel(0xffffffff, icdev->base + IC_RISINGCLR);
+ __raw_writel(0xffffffff, icdev->base + IC_FALLINGCLR);
+ __raw_writel(0x00000000, icdev->base + IC_TESTBIT);
+ wmb();
+ __raw_writel(icdev->pmdata[0], icdev->base + IC_CFG0SET);
+ __raw_writel(icdev->pmdata[1], icdev->base + IC_CFG1SET);
+ __raw_writel(icdev->pmdata[2], icdev->base + IC_CFG2SET);
+ __raw_writel(icdev->pmdata[3], icdev->base + IC_SRCSET);
+ __raw_writel(icdev->pmdata[4], icdev->base + IC_ASSIGNSET);
+ __raw_writel(icdev->pmdata[5], icdev->base + IC_WAKESET);
+ wmb();
+
+ __raw_writel(icdev->pmdata[6], icdev->base + IC_MASKSET);
+ wmb();
+
+ return 0;
+}
+
+static struct sysdev_class alchemy_ic_sysdev_class = {
+ .name = "ic",
+ .suspend = alchemy_ic_suspend,
+ .resume = alchemy_ic_resume,
+};
+
+static int __init alchemy_ic_sysdev_init(void)
+{
+ struct alchemy_ic_sysdev *icdev;
+ unsigned long icbase[2] = { IC0_PHYS_ADDR, IC1_PHYS_ADDR };
+ int err, i;
+
+ err = sysdev_class_register(&alchemy_ic_sysdev_class);
+ if (err)
+ return err;
+
+ for (i = 0; i < 2; i++) {
+ icdev = kzalloc(sizeof(struct alchemy_ic_sysdev), GFP_KERNEL);
+ if (!icdev)
+ return -ENOMEM;
+
+ icdev->base = ioremap(icbase[i], 0x1000);
+
+ icdev->sysdev.id = i;
+ icdev->sysdev.cls = &alchemy_ic_sysdev_class;
+ err = sysdev_register(&icdev->sysdev);
+ if (err) {
+ kfree(icdev);
+ return err;
+ }
+ }
+
+ return 0;
+}
+device_initcall(alchemy_ic_sysdev_init);
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index 117f99f7064..f9e5622ebc9 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -19,39 +19,40 @@
#include <asm/mach-au1x00/au1xxx.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>
#include <asm/mach-au1x00/au1100_mmc.h>
-
-#define PORT(_base, _irq) \
- { \
- .iobase = _base, \
- .membase = (void __iomem *)_base,\
- .mapbase = CPHYSADDR(_base), \
- .irq = _irq, \
- .regshift = 2, \
- .iotype = UPIO_AU, \
- .flags = UPF_SKIP_TEST \
+#include <asm/mach-au1x00/au1xxx_eth.h>
+
+#define PORT(_base, _irq) \
+ { \
+ .mapbase = _base, \
+ .irq = _irq, \
+ .regshift = 2, \
+ .iotype = UPIO_AU, \
+ .flags = UPF_SKIP_TEST | UPF_IOREMAP | \
+ UPF_FIXED_TYPE, \
+ .type = PORT_16550A, \
}
static struct plat_serial8250_port au1x00_uart_data[] = {
#if defined(CONFIG_SERIAL_8250_AU1X00)
#if defined(CONFIG_SOC_AU1000)
- PORT(UART0_ADDR, AU1000_UART0_INT),
- PORT(UART1_ADDR, AU1000_UART1_INT),
- PORT(UART2_ADDR, AU1000_UART2_INT),
- PORT(UART3_ADDR, AU1000_UART3_INT),
+ PORT(UART0_PHYS_ADDR, AU1000_UART0_INT),
+ PORT(UART1_PHYS_ADDR, AU1000_UART1_INT),
+ PORT(UART2_PHYS_ADDR, AU1000_UART2_INT),
+ PORT(UART3_PHYS_ADDR, AU1000_UART3_INT),
#elif defined(CONFIG_SOC_AU1500)
- PORT(UART0_ADDR, AU1500_UART0_INT),
- PORT(UART3_ADDR, AU1500_UART3_INT),
+ PORT(UART0_PHYS_ADDR, AU1500_UART0_INT),
+ PORT(UART3_PHYS_ADDR, AU1500_UART3_INT),
#elif defined(CONFIG_SOC_AU1100)
- PORT(UART0_ADDR, AU1100_UART0_INT),
- PORT(UART1_ADDR, AU1100_UART1_INT),
- PORT(UART3_ADDR, AU1100_UART3_INT),
+ PORT(UART0_PHYS_ADDR, AU1100_UART0_INT),
+ PORT(UART1_PHYS_ADDR, AU1100_UART1_INT),
+ PORT(UART3_PHYS_ADDR, AU1100_UART3_INT),
#elif defined(CONFIG_SOC_AU1550)
- PORT(UART0_ADDR, AU1550_UART0_INT),
- PORT(UART1_ADDR, AU1550_UART1_INT),
- PORT(UART3_ADDR, AU1550_UART3_INT),
+ PORT(UART0_PHYS_ADDR, AU1550_UART0_INT),
+ PORT(UART1_PHYS_ADDR, AU1550_UART1_INT),
+ PORT(UART3_PHYS_ADDR, AU1550_UART3_INT),
#elif defined(CONFIG_SOC_AU1200)
- PORT(UART0_ADDR, AU1200_UART0_INT),
- PORT(UART1_ADDR, AU1200_UART1_INT),
+ PORT(UART0_PHYS_ADDR, AU1200_UART0_INT),
+ PORT(UART1_PHYS_ADDR, AU1200_UART1_INT),
#endif
#endif /* CONFIG_SERIAL_8250_AU1X00 */
{ },
@@ -73,8 +74,8 @@ static struct resource au1xxx_usb_ohci_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AU1000_USB_HOST_INT,
- .end = AU1000_USB_HOST_INT,
+ .start = FOR_PLATFORM_C_USB_HOST_INT,
+ .end = FOR_PLATFORM_C_USB_HOST_INT,
.flags = IORESOURCE_IRQ,
},
};
@@ -132,8 +133,8 @@ static struct resource au1xxx_usb_ehci_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AU1000_USB_HOST_INT,
- .end = AU1000_USB_HOST_INT,
+ .start = AU1200_USB_INT,
+ .end = AU1200_USB_INT,
.flags = IORESOURCE_IRQ,
},
};
@@ -308,11 +309,6 @@ static struct platform_device au1200_mmc1_device = {
#endif /* #ifndef CONFIG_MIPS_DB1200 */
#endif /* #ifdef CONFIG_SOC_AU1200 */
-static struct platform_device au1x00_pcmcia_device = {
- .name = "au1x00-pcmcia",
- .id = 0,
-};
-
/* All Alchemy demoboards with I2C have this #define in their headers */
#ifdef SMBUS_PSC_BASE
static struct resource pbdb_smbus_resources[] = {
@@ -331,10 +327,92 @@ static struct platform_device pbdb_smbus_device = {
};
#endif
+/* Macro to help defining the Ethernet MAC resources */
+#define MAC_RES(_base, _enable, _irq) \
+ { \
+ .start = CPHYSADDR(_base), \
+ .end = CPHYSADDR(_base + 0xffff), \
+ .flags = IORESOURCE_MEM, \
+ }, \
+ { \
+ .start = CPHYSADDR(_enable), \
+ .end = CPHYSADDR(_enable + 0x3), \
+ .flags = IORESOURCE_MEM, \
+ }, \
+ { \
+ .start = _irq, \
+ .end = _irq, \
+ .flags = IORESOURCE_IRQ \
+ }
+
+static struct resource au1xxx_eth0_resources[] = {
+#if defined(CONFIG_SOC_AU1000)
+ MAC_RES(AU1000_ETH0_BASE, AU1000_MAC0_ENABLE, AU1000_MAC0_DMA_INT),
+#elif defined(CONFIG_SOC_AU1100)
+ MAC_RES(AU1100_ETH0_BASE, AU1100_MAC0_ENABLE, AU1100_MAC0_DMA_INT),
+#elif defined(CONFIG_SOC_AU1550)
+ MAC_RES(AU1550_ETH0_BASE, AU1550_MAC0_ENABLE, AU1550_MAC0_DMA_INT),
+#elif defined(CONFIG_SOC_AU1500)
+ MAC_RES(AU1500_ETH0_BASE, AU1500_MAC0_ENABLE, AU1500_MAC0_DMA_INT),
+#endif
+};
+
+
+static struct au1000_eth_platform_data au1xxx_eth0_platform_data = {
+ .phy1_search_mac0 = 1,
+};
+
+static struct platform_device au1xxx_eth0_device = {
+ .name = "au1000-eth",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(au1xxx_eth0_resources),
+ .resource = au1xxx_eth0_resources,
+ .dev.platform_data = &au1xxx_eth0_platform_data,
+};
+
+#ifndef CONFIG_SOC_AU1100
+static struct resource au1xxx_eth1_resources[] = {
+#if defined(CONFIG_SOC_AU1000)
+ MAC_RES(AU1000_ETH1_BASE, AU1000_MAC1_ENABLE, AU1000_MAC1_DMA_INT),
+#elif defined(CONFIG_SOC_AU1550)
+ MAC_RES(AU1550_ETH1_BASE, AU1550_MAC1_ENABLE, AU1550_MAC1_DMA_INT),
+#elif defined(CONFIG_SOC_AU1500)
+ MAC_RES(AU1500_ETH1_BASE, AU1500_MAC1_ENABLE, AU1500_MAC1_DMA_INT),
+#endif
+};
+
+static struct au1000_eth_platform_data au1xxx_eth1_platform_data = {
+ .phy1_search_mac0 = 1,
+};
+
+static struct platform_device au1xxx_eth1_device = {
+ .name = "au1000-eth",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(au1xxx_eth1_resources),
+ .resource = au1xxx_eth1_resources,
+ .dev.platform_data = &au1xxx_eth1_platform_data,
+};
+#endif
+
+void __init au1xxx_override_eth_cfg(unsigned int port,
+ struct au1000_eth_platform_data *eth_data)
+{
+ if (!eth_data || port > 1)
+ return;
+
+ if (port == 0)
+ memcpy(&au1xxx_eth0_platform_data, eth_data,
+ sizeof(struct au1000_eth_platform_data));
+#ifndef CONFIG_SOC_AU1100
+ else
+ memcpy(&au1xxx_eth1_platform_data, eth_data,
+ sizeof(struct au1000_eth_platform_data));
+#endif
+}
+
static struct platform_device *au1xxx_platform_devices[] __initdata = {
&au1xx0_uart_device,
&au1xxx_usb_ohci_device,
- &au1x00_pcmcia_device,
#ifdef CONFIG_FB_AU1100
&au1100_lcd_device,
#endif
@@ -351,19 +429,27 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
#ifdef SMBUS_PSC_BASE
&pbdb_smbus_device,
#endif
+ &au1xxx_eth0_device,
};
static int __init au1xxx_platform_init(void)
{
unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
- int i;
+ int err, i;
/* Fill up uartclk. */
for (i = 0; au1x00_uart_data[i].flags; i++)
au1x00_uart_data[i].uartclk = uartclk;
- return platform_add_devices(au1xxx_platform_devices,
- ARRAY_SIZE(au1xxx_platform_devices));
+ err = platform_add_devices(au1xxx_platform_devices,
+ ARRAY_SIZE(au1xxx_platform_devices));
+#ifndef CONFIG_SOC_AU1100
+ /* Register second MAC if enabled in pinfunc */
+ if (!err && !(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2))
+ platform_device_register(&au1xxx_eth1_device);
+#endif
+
+ return err;
}
arch_initcall(au1xxx_platform_init);
diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c
index 6ab7b42aa1b..5ef06a164a8 100644
--- a/arch/mips/alchemy/common/power.c
+++ b/arch/mips/alchemy/common/power.c
@@ -36,9 +36,6 @@
#include <asm/uaccess.h>
#include <asm/mach-au1x00/au1000.h>
-#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
-#include <asm/mach-au1x00/au1xxx_dbdma.h>
-#endif
#ifdef CONFIG_PM
@@ -106,9 +103,6 @@ static void save_core_regs(void)
sleep_usb[1] = au_readl(0xb4020024); /* OTG_MUX */
#endif
- /* Save interrupt controller state. */
- save_au1xxx_intctl();
-
/* Clocks and PLLs. */
sleep_sys_clocks[0] = au_readl(SYS_FREQCTRL0);
sleep_sys_clocks[1] = au_readl(SYS_FREQCTRL1);
@@ -132,10 +126,6 @@ static void save_core_regs(void)
sleep_static_memctlr[3][0] = au_readl(MEM_STCFG3);
sleep_static_memctlr[3][1] = au_readl(MEM_STTIME3);
sleep_static_memctlr[3][2] = au_readl(MEM_STADDR3);
-
-#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
- au1xxx_dbdma_suspend();
-#endif
}
static void restore_core_regs(void)
@@ -199,19 +189,19 @@ static void restore_core_regs(void)
au_writel(sleep_uart0_linectl, UART0_ADDR + UART_LCR); au_sync();
au_writel(sleep_uart0_clkdiv, UART0_ADDR + UART_CLK); au_sync();
}
-
- restore_au1xxx_intctl();
-
-#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
- au1xxx_dbdma_resume();
-#endif
}
void au_sleep(void)
{
- save_core_regs();
- au1xxx_save_and_sleep();
- restore_core_regs();
+ int cpuid = alchemy_get_cputype();
+ if (cpuid != ALCHEMY_CPU_UNKNOWN) {
+ save_core_regs();
+ if (cpuid <= ALCHEMY_CPU_AU1500)
+ alchemy_sleep_au1000();
+ else if (cpuid <= ALCHEMY_CPU_AU1200)
+ alchemy_sleep_au1550();
+ restore_core_regs();
+ }
}
#endif /* CONFIG_PM */
diff --git a/arch/mips/alchemy/common/prom.c b/arch/mips/alchemy/common/prom.c
index 18b310b475c..c29511b11d4 100644
--- a/arch/mips/alchemy/common/prom.c
+++ b/arch/mips/alchemy/common/prom.c
@@ -43,29 +43,15 @@ int prom_argc;
char **prom_argv;
char **prom_envp;
-char * __init_or_module prom_getcmdline(void)
-{
- return &(arcs_cmdline[0]);
-}
-
void prom_init_cmdline(void)
{
- char *cp;
- int actr;
-
- actr = 1; /* Always ignore argv[0] */
+ int i;
- cp = &(arcs_cmdline[0]);
- while (actr < prom_argc) {
- strcpy(cp, prom_argv[actr]);
- cp += strlen(prom_argv[actr]);
- *cp++ = ' ';
- actr++;
+ for (i = 1; i < prom_argc; i++) {
+ strlcat(arcs_cmdline, prom_argv[i], COMMAND_LINE_SIZE);
+ if (i < (prom_argc - 1))
+ strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
}
- if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
- --cp;
- if (prom_argc > 1)
- *cp = '\0';
}
char *prom_getenv(char *envname)
@@ -121,14 +107,12 @@ static inline void str2eaddr(unsigned char *ea, unsigned char *str)
int prom_get_ethernet_addr(char *ethernet_addr)
{
char *ethaddr_str;
- char *argptr;
/* Check the environment variables first */
ethaddr_str = prom_getenv("ethaddr");
if (!ethaddr_str) {
/* Check command line */
- argptr = prom_getcmdline();
- ethaddr_str = strstr(argptr, "ethaddr=");
+ ethaddr_str = strstr(arcs_cmdline, "ethaddr=");
if (!ethaddr_str)
return -1;
diff --git a/arch/mips/alchemy/common/puts.c b/arch/mips/alchemy/common/puts.c
deleted file mode 100644
index 55bbe24d45b..00000000000
--- a/arch/mips/alchemy/common/puts.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- * Low level UART routines to directly access Alchemy UART.
- *
- * Copyright 2001, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <asm/mach-au1x00/au1000.h>
-
-#define SERIAL_BASE UART_BASE
-#define SER_CMD 0x7
-#define SER_DATA 0x1
-#define TX_BUSY 0x20
-
-#define TIMEOUT 0xffffff
-#define SLOW_DOWN
-
-static volatile unsigned long * const com1 = (unsigned long *)SERIAL_BASE;
-
-#ifdef SLOW_DOWN
-static inline void slow_down(void)
-{
- int k;
-
- for (k = 0; k < 10000; k++);
-}
-#else
-#define slow_down()
-#endif
-
-void
-prom_putchar(const unsigned char c)
-{
- unsigned char ch;
- int i = 0;
-
- do {
- ch = com1[SER_CMD];
- slow_down();
- i++;
- if (i > TIMEOUT)
- break;
- } while (0 == (ch & TX_BUSY));
-
- com1[SER_DATA] = c;
-}
diff --git a/arch/mips/alchemy/common/reset.c b/arch/mips/alchemy/common/reset.c
deleted file mode 100644
index 4791011e8f9..00000000000
--- a/arch/mips/alchemy/common/reset.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- * Au1xx0 reset routines.
- *
- * Copyright 2001, 2006, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/cacheflush.h>
-#include <asm/mach-au1x00/au1000.h>
-
-void au1000_restart(char *command)
-{
- /* Set all integrated peripherals to disabled states */
- extern void board_reset(void);
- u32 prid = read_c0_prid();
-
- printk(KERN_NOTICE "\n** Resetting Integrated Peripherals\n");
-
- switch (prid & 0xFF000000) {
- case 0x00000000: /* Au1000 */
- au_writel(0x02, 0xb0000010); /* ac97_enable */
- au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
- asm("sync");
- au_writel(0x00, 0xb017fffc); /* usbh_enable */
- au_writel(0x00, 0xb0200058); /* usbd_enable */
- au_writel(0x00, 0xb0300040); /* ir_enable */
- au_writel(0x00, 0xb4004104); /* mac dma */
- au_writel(0x00, 0xb4004114); /* mac dma */
- au_writel(0x00, 0xb4004124); /* mac dma */
- au_writel(0x00, 0xb4004134); /* mac dma */
- au_writel(0x00, 0xb0520000); /* macen0 */
- au_writel(0x00, 0xb0520004); /* macen1 */
- au_writel(0x00, 0xb1000008); /* i2s_enable */
- au_writel(0x00, 0xb1100100); /* uart0_enable */
- au_writel(0x00, 0xb1200100); /* uart1_enable */
- au_writel(0x00, 0xb1300100); /* uart2_enable */
- au_writel(0x00, 0xb1400100); /* uart3_enable */
- au_writel(0x02, 0xb1600100); /* ssi0_enable */
- au_writel(0x02, 0xb1680100); /* ssi1_enable */
- au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
- au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
- au_writel(0x00, 0xb1900028); /* sys_clksrc */
- au_writel(0x10, 0xb1900060); /* sys_cpupll */
- au_writel(0x00, 0xb1900064); /* sys_auxpll */
- au_writel(0x00, 0xb1900100); /* sys_pininputen */
- break;
- case 0x01000000: /* Au1500 */
- au_writel(0x02, 0xb0000010); /* ac97_enable */
- au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
- asm("sync");
- au_writel(0x00, 0xb017fffc); /* usbh_enable */
- au_writel(0x00, 0xb0200058); /* usbd_enable */
- au_writel(0x00, 0xb4004104); /* mac dma */
- au_writel(0x00, 0xb4004114); /* mac dma */
- au_writel(0x00, 0xb4004124); /* mac dma */
- au_writel(0x00, 0xb4004134); /* mac dma */
- au_writel(0x00, 0xb1520000); /* macen0 */
- au_writel(0x00, 0xb1520004); /* macen1 */
- au_writel(0x00, 0xb1100100); /* uart0_enable */
- au_writel(0x00, 0xb1400100); /* uart3_enable */
- au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
- au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
- au_writel(0x00, 0xb1900028); /* sys_clksrc */
- au_writel(0x10, 0xb1900060); /* sys_cpupll */
- au_writel(0x00, 0xb1900064); /* sys_auxpll */
- au_writel(0x00, 0xb1900100); /* sys_pininputen */
- break;
- case 0x02000000: /* Au1100 */
- au_writel(0x02, 0xb0000010); /* ac97_enable */
- au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
- asm("sync");
- au_writel(0x00, 0xb017fffc); /* usbh_enable */
- au_writel(0x00, 0xb0200058); /* usbd_enable */
- au_writel(0x00, 0xb0300040); /* ir_enable */
- au_writel(0x00, 0xb4004104); /* mac dma */
- au_writel(0x00, 0xb4004114); /* mac dma */
- au_writel(0x00, 0xb4004124); /* mac dma */
- au_writel(0x00, 0xb4004134); /* mac dma */
- au_writel(0x00, 0xb0520000); /* macen0 */
- au_writel(0x00, 0xb1000008); /* i2s_enable */
- au_writel(0x00, 0xb1100100); /* uart0_enable */
- au_writel(0x00, 0xb1200100); /* uart1_enable */
- au_writel(0x00, 0xb1400100); /* uart3_enable */
- au_writel(0x02, 0xb1600100); /* ssi0_enable */
- au_writel(0x02, 0xb1680100); /* ssi1_enable */
- au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
- au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
- au_writel(0x00, 0xb1900028); /* sys_clksrc */
- au_writel(0x10, 0xb1900060); /* sys_cpupll */
- au_writel(0x00, 0xb1900064); /* sys_auxpll */
- au_writel(0x00, 0xb1900100); /* sys_pininputen */
- break;
- case 0x03000000: /* Au1550 */
- au_writel(0x00, 0xb1a00004); /* psc 0 */
- au_writel(0x00, 0xb1b00004); /* psc 1 */
- au_writel(0x00, 0xb0a00004); /* psc 2 */
- au_writel(0x00, 0xb0b00004); /* psc 3 */
- au_writel(0x00, 0xb017fffc); /* usbh_enable */
- au_writel(0x00, 0xb0200058); /* usbd_enable */
- au_writel(0x00, 0xb4004104); /* mac dma */
- au_writel(0x00, 0xb4004114); /* mac dma */
- au_writel(0x00, 0xb4004124); /* mac dma */
- au_writel(0x00, 0xb4004134); /* mac dma */
- au_writel(0x00, 0xb1520000); /* macen0 */
- au_writel(0x00, 0xb1520004); /* macen1 */
- au_writel(0x00, 0xb1100100); /* uart0_enable */
- au_writel(0x00, 0xb1200100); /* uart1_enable */
- au_writel(0x00, 0xb1400100); /* uart3_enable */
- au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
- au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
- au_writel(0x00, 0xb1900028); /* sys_clksrc */
- au_writel(0x10, 0xb1900060); /* sys_cpupll */
- au_writel(0x00, 0xb1900064); /* sys_auxpll */
- au_writel(0x00, 0xb1900100); /* sys_pininputen */
- break;
- }
-
- set_c0_status(ST0_BEV | ST0_ERL);
- change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
- flush_cache_all();
- write_c0_wired(0);
-
- /* Give board a chance to do a hardware reset */
- board_reset();
-
- /* Jump to the beggining in case board_reset() is empty */
- __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
-}
-
-void au1000_halt(void)
-{
-#if defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550)
- /* Power off system */
- printk(KERN_NOTICE "\n** Powering off...\n");
- au_writew(au_readw(0xAF00001C) | (3 << 14), 0xAF00001C);
- au_sync();
- while (1); /* should not get here */
-#else
- printk(KERN_NOTICE "\n** You can safely turn off the power\n");
-#ifdef CONFIG_MIPS_MIRAGE
- gpio_direction_output(210, 1);
-#endif
-#ifdef CONFIG_MIPS_DB1200
- au_writew(au_readw(0xB980001C) | (1 << 14), 0xB980001C);
-#endif
-#ifdef CONFIG_PM
- au_sleep();
-
- /* Should not get here */
- printk(KERN_ERR "Unable to put CPU in sleep mode\n");
- while (1);
-#else
- while (1)
- __asm__(".set\tmips3\n\t"
- "wait\n\t"
- ".set\tmips0");
-#endif
-#endif /* defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) */
-}
-
-void au1000_power_off(void)
-{
- au1000_halt();
-}
diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
index 6184baa5678..561e5da2658 100644
--- a/arch/mips/alchemy/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
@@ -29,18 +29,13 @@
#include <linux/ioport.h>
#include <linux/jiffies.h>
#include <linux/module.h>
-#include <linux/pm.h>
#include <asm/mipsregs.h>
-#include <asm/reboot.h>
#include <asm/time.h>
#include <au1000.h>
extern void __init board_setup(void);
-extern void au1000_restart(char *);
-extern void au1000_halt(void);
-extern void au1000_power_off(void);
extern void set_cpuspec(void);
void __init plat_mem_setup(void)
@@ -57,10 +52,6 @@ void __init plat_mem_setup(void)
/* this is faster than wasting cycles trying to approximate it */
preset_lpj = (est_freq >> 1) / HZ;
- _machine_restart = au1000_restart;
- _machine_halt = au1000_halt;
- pm_power_off = au1000_power_off;
-
board_setup(); /* board specific setup */
if (au1xxx_cpu_needs_config_od())
@@ -78,37 +69,20 @@ void __init plat_mem_setup(void)
iomem_resource.end = IOMEM_RESOURCE_END;
}
-#if defined(CONFIG_64BIT_PHYS_ADDR)
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_PCI)
/* This routine should be valid for all Au1x based boards */
phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
{
+ u32 start = (u32)Au1500_PCI_MEM_START;
+ u32 end = (u32)Au1500_PCI_MEM_END;
+
/* Don't fixup 36-bit addresses */
if ((phys_addr >> 32) != 0)
return phys_addr;
-#ifdef CONFIG_PCI
- {
- u32 start = (u32)Au1500_PCI_MEM_START;
- u32 end = (u32)Au1500_PCI_MEM_END;
-
- /* Check for PCI memory window */
- if (phys_addr >= start && (phys_addr + size - 1) <= end)
- return (phys_t)
- ((phys_addr - start) + Au1500_PCI_MEM_START);
- }
-#endif
-
- /*
- * All Au1xx0 SOCs have a PCMCIA controller.
- * We setup our 32-bit pseudo addresses to be equal to the
- * 36-bit addr >> 4, to make it easier to check the address
- * and fix it.
- * The PCMCIA socket 0 physical attribute address is 0xF 4000 0000.
- * The pseudo address we use is 0xF400 0000. Any address over
- * 0xF400 0000 is a PCMCIA pseudo address.
- */
- if ((phys_addr >= 0xF4000000) && (phys_addr < 0xFFFFFFFF))
- return (phys_t)(phys_addr << 4);
+ /* Check for PCI memory window */
+ if (phys_addr >= start && (phys_addr + size - 1) <= end)
+ return (phys_t)((phys_addr - start) + Au1500_PCI_MEM_START);
/* default nop */
return phys_addr;
diff --git a/arch/mips/alchemy/common/sleeper.S b/arch/mips/alchemy/common/sleeper.S
index 4f4b16741d1..77f3c743b71 100644
--- a/arch/mips/alchemy/common/sleeper.S
+++ b/arch/mips/alchemy/common/sleeper.S
@@ -22,10 +22,9 @@
.set noat
.align 5
-/* Save all of the processor general registers and go to sleep.
- * A wakeup condition will get us back here to restore the registers.
- */
-LEAF(au1xxx_save_and_sleep)
+
+/* preparatory stuff */
+.macro SETUP_SLEEP
subu sp, PT_SIZE
sw $1, PT_R1(sp)
sw $2, PT_R2(sp)
@@ -69,12 +68,32 @@ LEAF(au1xxx_save_and_sleep)
*/
lui t3, 0xb190 /* sys_xxx */
sw sp, 0x0018(t3)
- la k0, 3f /* resume path */
+ la k0, alchemy_sleep_wakeup /* resume path */
sw k0, 0x001c(t3)
+.endm
- /* Put SDRAM into self refresh: Preload instructions into cache,
- * issue a precharge, auto/self refresh, then sleep commands to it.
- */
+.macro DO_SLEEP
+ /* put power supply and processor to sleep */
+ sw zero, 0x0078(t3) /* sys_slppwr */
+ sync
+ sw zero, 0x007c(t3) /* sys_sleep */
+ sync
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+.endm
+
+/* sleep code for Au1000/Au1100/Au1500 memory controller type */
+LEAF(alchemy_sleep_au1000)
+
+ SETUP_SLEEP
+
+ /* cache following instructions, as memory gets put to sleep */
la t0, 1f
.set mips3
cache 0x14, 0(t0)
@@ -84,17 +103,32 @@ LEAF(au1xxx_save_and_sleep)
.set mips0
1: lui a0, 0xb400 /* mem_xxx */
-#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100) || \
- defined(CONFIG_SOC_AU1500)
sw zero, 0x001c(a0) /* Precharge */
sync
sw zero, 0x0020(a0) /* Auto Refresh */
sync
sw zero, 0x0030(a0) /* Sleep */
sync
-#endif
-#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
+ DO_SLEEP
+
+END(alchemy_sleep_au1000)
+
+/* sleep code for Au1550/Au1200 memory controller type */
+LEAF(alchemy_sleep_au1550)
+
+ SETUP_SLEEP
+
+ /* cache following instructions, as memory gets put to sleep */
+ la t0, 1f
+ .set mips3
+ cache 0x14, 0(t0)
+ cache 0x14, 32(t0)
+ cache 0x14, 64(t0)
+ cache 0x14, 96(t0)
+ .set mips0
+
+1: lui a0, 0xb400 /* mem_xxx */
sw zero, 0x08c0(a0) /* Precharge */
sync
sw zero, 0x08d0(a0) /* Self Refresh */
@@ -114,26 +148,17 @@ LEAF(au1xxx_save_and_sleep)
and t1, t0, t1 /* clear CE[1:0] */
sw t1, 0x0840(a0) /* mem_sdconfiga */
sync
-#endif
- /* put power supply and processor to sleep */
- sw zero, 0x0078(t3) /* sys_slppwr */
- sync
- sw zero, 0x007c(t3) /* sys_sleep */
- sync
- nop
- nop
- nop
- nop
- nop
- nop
- nop
- nop
+ DO_SLEEP
+
+END(alchemy_sleep_au1550)
+
/* This is where we return upon wakeup.
* Reload all of the registers and return.
*/
-3: lw k0, 0x20(sp)
+LEAF(alchemy_sleep_wakeup)
+ lw k0, 0x20(sp)
mtc0 k0, CP0_STATUS
lw k0, 0x1c(sp)
mtc0 k0, CP0_CONTEXT
@@ -169,4 +194,4 @@ LEAF(au1xxx_save_and_sleep)
lw $31, PT_R31(sp)
jr ra
addiu sp, PT_SIZE
-END(au1xxx_save_and_sleep)
+END(alchemy_sleep_wakeup)
diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
index 379a664809b..2aecb2fdf98 100644
--- a/arch/mips/alchemy/common/time.c
+++ b/arch/mips/alchemy/common/time.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2008 Manuel Lauss <mano@roarinelk.homelinux.net>
+ * Copyright (C) 2008-2009 Manuel Lauss <manuel.lauss@gmail.com>
*
* Previous incarnations were:
* Copyright (C) 2001, 2006, 2008 MontaVista Software, <source@mvista.com>
@@ -85,7 +85,6 @@ static struct clock_event_device au1x_rtcmatch2_clockdev = {
.name = "rtcmatch2",
.features = CLOCK_EVT_FEAT_ONESHOT,
.rating = 100,
- .irq = AU1000_RTC_MATCH2_INT,
.set_next_event = au1x_rtcmatch2_set_next_event,
.set_mode = au1x_rtcmatch2_set_mode,
.cpumask = cpu_all_mask,
@@ -98,11 +97,13 @@ static struct irqaction au1x_rtcmatch2_irqaction = {
.dev_id = &au1x_rtcmatch2_clockdev,
};
-void __init plat_time_init(void)
+static int __init alchemy_time_init(unsigned int m2int)
{
struct clock_event_device *cd = &au1x_rtcmatch2_clockdev;
unsigned long t;
+ au1x_rtcmatch2_clockdev.irq = m2int;
+
/* Check if firmware (YAMON, ...) has enabled 32kHz and clock
* has been detected. If so install the rtcmatch2 clocksource,
* otherwise don't bother. Note that both bits being set is by
@@ -148,13 +149,18 @@ void __init plat_time_init(void)
cd->max_delta_ns = clockevent_delta2ns(0xffffffff, cd);
cd->min_delta_ns = clockevent_delta2ns(8, cd); /* ~0.25ms */
clockevents_register_device(cd);
- setup_irq(AU1000_RTC_MATCH2_INT, &au1x_rtcmatch2_irqaction);
+ setup_irq(m2int, &au1x_rtcmatch2_irqaction);
printk(KERN_INFO "Alchemy clocksource installed\n");
- return;
+ return 0;
cntr_err:
+ return -1;
+}
+
+static void __init alchemy_setup_c0timer(void)
+{
/*
* MIPS kernel assigns 'au1k_wait' to 'cpu_wait' before this
* function is called. Because the Alchemy counters are unusable
@@ -166,3 +172,22 @@ cntr_err:
r4k_clockevent_init();
init_r4k_clocksource();
}
+
+static int alchemy_m2inttab[] __initdata = {
+ AU1000_RTC_MATCH2_INT,
+ AU1500_RTC_MATCH2_INT,
+ AU1100_RTC_MATCH2_INT,
+ AU1550_RTC_MATCH2_INT,
+ AU1200_RTC_MATCH2_INT,
+};
+
+void __init plat_time_init(void)
+{
+ int t;
+
+ t = alchemy_get_cputype();
+ if (t == ALCHEMY_CPU_UNKNOWN)
+ alchemy_setup_c0timer();
+ else if (alchemy_time_init(alchemy_m2inttab[t]))
+ alchemy_setup_c0timer();
+}
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-22 20:46:48 +0000