diff options
Diffstat (limited to 'arch/mips/Kconfig')
| -rw-r--r-- | arch/mips/Kconfig | 171 |
1 files changed, 94 insertions, 77 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 7aec60d4042..e8ff09fe73d 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -13,7 +13,7 @@ choice default SGI_IP22 config MIPS_MTX1 - bool "Support for 4G Systems MTX-1 board" + bool "4G Systems MTX-1 board" select DMA_NONCOHERENT select HW_HAS_PCI select SOC_AU1500 @@ -120,7 +120,7 @@ config MIPS_MIRAGE select SYS_SUPPORTS_LITTLE_ENDIAN config MIPS_COBALT - bool "Support for Cobalt Server" + bool "Cobalt Server" select DMA_NONCOHERENT select HW_HAS_PCI select I8259 @@ -132,7 +132,7 @@ config MIPS_COBALT select SYS_SUPPORTS_LITTLE_ENDIAN config MACH_DECSTATION - bool "Support for DECstations" + bool "DECstations" select BOOT_ELF32 select DMA_NONCOHERENT select EARLY_PRINTK @@ -158,7 +158,7 @@ config MACH_DECSTATION otherwise choose R3000. config MIPS_EV64120 - bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)" + bool "Galileo EV64120 Evaluation board (EXPERIMENTAL)" depends on EXPERIMENTAL select DMA_NONCOHERENT select HW_HAS_PCI @@ -175,7 +175,7 @@ config MIPS_EV64120 kernel for this platform. config MIPS_EV96100 - bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)" + bool "Galileo EV96100 Evaluation board (EXPERIMENTAL)" depends on EXPERIMENTAL select DMA_NONCOHERENT select HW_HAS_PCI @@ -195,7 +195,7 @@ config MIPS_EV96100 here if you wish to build a kernel for this platform. config MIPS_IVR - bool "Support for Globespan IVR board" + bool "Globespan IVR board" select DMA_NONCOHERENT select HW_HAS_PCI select ITE_BOARD_GEN @@ -211,7 +211,7 @@ config MIPS_IVR build a kernel for this platform. config MIPS_ITE8172 - bool "Support for ITE 8172G board" + bool "ITE 8172G board" select DMA_NONCOHERENT select HW_HAS_PCI select ITE_BOARD_GEN @@ -228,7 +228,7 @@ config MIPS_ITE8172 a kernel for this platform. config MACH_JAZZ - bool "Support for the Jazz family of machines" + bool "Jazz family of machines" select ARC select ARC32 select ARCH_MAY_HAVE_PC_FDC @@ -246,7 +246,7 @@ config MACH_JAZZ Olivetti M700-10 workstations. config LASAT - bool "Support for LASAT Networks platforms" + bool "LASAT Networks platforms" select DMA_NONCOHERENT select HW_HAS_PCI select MIPS_GT64120 @@ -258,7 +258,7 @@ config LASAT select SYS_SUPPORTS_LITTLE_ENDIAN config MIPS_ATLAS - bool "Support for MIPS Atlas board" + bool "MIPS Atlas board" select BOOT_ELF32 select DMA_NONCOHERENT select IRQ_CPU @@ -283,7 +283,7 @@ config MIPS_ATLAS board. config MIPS_MALTA - bool "Support for MIPS Malta board" + bool "MIPS Malta board" select ARCH_MAY_HAVE_PC_FDC select BOOT_ELF32 select HAVE_STD_PC_SERIAL_PORT @@ -311,7 +311,7 @@ config MIPS_MALTA board. config MIPS_SEAD - bool "Support for MIPS SEAD board (EXPERIMENTAL)" + bool "MIPS SEAD board (EXPERIMENTAL)" depends on EXPERIMENTAL select IRQ_CPU select DMA_NONCOHERENT @@ -328,7 +328,7 @@ config MIPS_SEAD board. config MIPS_SIM - bool 'Support for MIPS simulator (MIPSsim)' + bool 'MIPS simulator (MIPSsim)' select DMA_NONCOHERENT select IRQ_CPU select SYS_HAS_CPU_MIPS32_R1 @@ -341,7 +341,7 @@ config MIPS_SIM emulator. config MOMENCO_JAGUAR_ATX - bool "Support for Momentum Jaguar board" + bool "Momentum Jaguar board" select BOOT_ELF32 select DMA_NONCOHERENT select HW_HAS_PCI @@ -361,7 +361,7 @@ config MOMENCO_JAGUAR_ATX Momentum Computer <http://www.momenco.com/>. config MOMENCO_OCELOT - bool "Support for Momentum Ocelot board" + bool "Momentum Ocelot board" select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU @@ -378,7 +378,7 @@ config MOMENCO_OCELOT Momentum Computer <http://www.momenco.com/>. config MOMENCO_OCELOT_3 - bool "Support for Momentum Ocelot-3 board" + bool "Momentum Ocelot-3 board" select BOOT_ELF32 select DMA_NONCOHERENT select HW_HAS_PCI @@ -397,7 +397,7 @@ config MOMENCO_OCELOT_3 PMC-Sierra Rm79000 core. config MOMENCO_OCELOT_C - bool "Support for Momentum Ocelot-C board" + bool "Momentum Ocelot-C board" select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU @@ -414,7 +414,7 @@ config MOMENCO_OCELOT_C Momentum Computer <http://www.momenco.com/>. config MOMENCO_OCELOT_G - bool "Support for Momentum Ocelot-G board" + bool "Momentum Ocelot-G board" select DMA_NONCOHERENT select HW_HAS_PCI select IRQ_CPU @@ -431,23 +431,23 @@ config MOMENCO_OCELOT_G Momentum Computer <http://www.momenco.com/>. config MIPS_XXS1500 - bool "Support for MyCable XXS1500 board" + bool "MyCable XXS1500 board" select DMA_NONCOHERENT select SOC_AU1500 select SYS_SUPPORTS_LITTLE_ENDIAN config PNX8550_V2PCI - bool "Support for Philips PNX8550 based Viper2-PCI board" + bool "Philips PNX8550 based Viper2-PCI board" select PNX8550 select SYS_SUPPORTS_LITTLE_ENDIAN config PNX8550_JBS - bool "Support for Philips PNX8550 based JBS board" + bool "Philips PNX8550 based JBS board" select PNX8550 select SYS_SUPPORTS_LITTLE_ENDIAN config DDB5074 - bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)" + bool "NEC DDB Vrc-5074 (EXPERIMENTAL)" depends on EXPERIMENTAL select DDB5XXX_COMMON select DMA_NONCOHERENT @@ -465,7 +465,7 @@ config DDB5074 evaluation board. config DDB5476 - bool "Support for NEC DDB Vrc-5476" + bool "NEC DDB Vrc-5476" select DDB5XXX_COMMON select DMA_NONCOHERENT select HAVE_STD_PC_SERIAL_PORT @@ -486,7 +486,7 @@ config DDB5476 IDE controller, PS2 keyboard, PS2 mouse, etc. config DDB5477 - bool "Support for NEC DDB Vrc-5477" + bool "NEC DDB Vrc-5477" select DDB5XXX_COMMON select DMA_NONCOHERENT select HW_HAS_PCI @@ -504,13 +504,13 @@ config DDB5477 ether port USB, AC97, PCI, etc. config MACH_VR41XX - bool "Support for NEC VR4100 series based machines" + bool "NEC VR41XX-based machines" select SYS_HAS_CPU_VR41XX select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL config PMC_YOSEMITE - bool "Support for PMC-Sierra Yosemite eval board" + bool "PMC-Sierra Yosemite eval board" select DMA_COHERENT select HW_HAS_PCI select IRQ_CPU @@ -527,7 +527,7 @@ config PMC_YOSEMITE manufactured by PMC-Sierra. config QEMU - bool "Support for Qemu" + bool "Qemu" select DMA_COHERENT select GENERIC_ISA_DMA select HAVE_STD_PC_SERIAL_PORT @@ -547,7 +547,7 @@ config QEMU can be found at http://www.linux-mips.org/wiki/Qemu. config SGI_IP22 - bool "Support for SGI IP22 (Indy/Indigo2)" + bool "SGI IP22 (Indy/Indigo2)" select ARC select ARC32 select BOOT_ELF32 @@ -567,7 +567,7 @@ config SGI_IP22 that runs on these, say Y here. config SGI_IP27 - bool "Support for SGI IP27 (Origin200/2000)" + bool "SGI IP27 (Origin200/2000)" select ARC select ARC64 select BOOT_ELF64 @@ -583,7 +583,7 @@ config SGI_IP27 here. config SGI_IP32 - bool "Support for SGI IP32 (O2) (EXPERIMENTAL)" + bool "SGI IP32 (O2) (EXPERIMENTAL)" depends on EXPERIMENTAL select ARC select ARC32 @@ -604,7 +604,7 @@ config SGI_IP32 If you want this kernel to run on SGI O2 workstation, say Y here. config SIBYTE_BIGSUR - bool "Support for Sibyte BCM91480B-BigSur" + bool "Sibyte BCM91480B-BigSur" select BOOT_ELF32 select DMA_COHERENT select PCI_DOMAINS @@ -615,7 +615,7 @@ config SIBYTE_BIGSUR select SYS_SUPPORTS_LITTLE_ENDIAN config SIBYTE_SWARM - bool "Support for Sibyte BCM91250A-SWARM" + bool "Sibyte BCM91250A-SWARM" select BOOT_ELF32 select DMA_COHERENT select SIBYTE_SB1250 @@ -626,7 +626,7 @@ config SIBYTE_SWARM select SYS_SUPPORTS_LITTLE_ENDIAN config SIBYTE_SENTOSA - bool "Support for Sibyte BCM91250E-Sentosa" + bool "Sibyte BCM91250E-Sentosa" depends on EXPERIMENTAL select BOOT_ELF32 select DMA_COHERENT @@ -637,7 +637,7 @@ config SIBYTE_SENTOSA select SYS_SUPPORTS_LITTLE_ENDIAN config SIBYTE_RHONE - bool "Support for Sibyte BCM91125E-Rhone" + bool "Sibyte BCM91125E-Rhone" depends on EXPERIMENTAL select BOOT_ELF32 select DMA_COHERENT @@ -648,7 +648,7 @@ config SIBYTE_RHONE select SYS_SUPPORTS_LITTLE_ENDIAN config SIBYTE_CARMEL - bool "Support for Sibyte BCM91120x-Carmel" + bool "Sibyte BCM91120x-Carmel" depends on EXPERIMENTAL select BOOT_ELF32 select DMA_COHERENT @@ -659,7 +659,7 @@ config SIBYTE_CARMEL select SYS_SUPPORTS_LITTLE_ENDIAN config SIBYTE_PTSWARM - bool "Support for Sibyte BCM91250PT-PTSWARM" + bool "Sibyte BCM91250PT-PTSWARM" depends on EXPERIMENTAL select BOOT_ELF32 select DMA_COHERENT @@ -671,7 +671,7 @@ config SIBYTE_PTSWARM select SYS_SUPPORTS_LITTLE_ENDIAN config SIBYTE_LITTLESUR - bool "Support for Sibyte BCM91250C2-LittleSur" + bool "Sibyte BCM91250C2-LittleSur" depends on EXPERIMENTAL select BOOT_ELF32 select DMA_COHERENT @@ -683,7 +683,7 @@ config SIBYTE_LITTLESUR select SYS_SUPPORTS_LITTLE_ENDIAN config SIBYTE_CRHINE - bool "Support for Sibyte BCM91120C-CRhine" + bool "Sibyte BCM91120C-CRhine" depends on EXPERIMENTAL select BOOT_ELF32 select DMA_COHERENT @@ -694,7 +694,7 @@ config SIBYTE_CRHINE select SYS_SUPPORTS_LITTLE_ENDIAN config SIBYTE_CRHONE - bool "Support for Sibyte BCM91125C-CRhone" + bool "Sibyte BCM91125C-CRhone" depends on EXPERIMENTAL select BOOT_ELF32 select DMA_COHERENT @@ -706,7 +706,7 @@ config SIBYTE_CRHONE select SYS_SUPPORTS_LITTLE_ENDIAN config SNI_RM200_PCI - bool "Support for SNI RM200 PCI" + bool "SNI RM200 PCI" select ARC select ARC32 select ARCH_MAY_HAVE_PC_FDC @@ -732,7 +732,7 @@ config SNI_RM200_PCI support this machine type. config TOSHIBA_JMR3927 - bool "Support for Toshiba JMR-TX3927 board" + bool "Toshiba JMR-TX3927 board" select DMA_NONCOHERENT select HW_HAS_PCI select MIPS_TX3927 @@ -743,7 +743,7 @@ config TOSHIBA_JMR3927 select TOSHIBA_BOARDS config TOSHIBA_RBTX4927 - bool "Support for Toshiba TBTX49[23]7 board" + bool "Toshiba TBTX49[23]7 board" select DMA_NONCOHERENT select HAS_TXX9_SERIAL select HW_HAS_PCI @@ -760,7 +760,7 @@ config TOSHIBA_RBTX4927 support this machine type config TOSHIBA_RBTX4938 - bool "Support for Toshiba RBTX4938 board" + bool "Toshiba RBTX4938 board" select HAVE_STD_PC_SERIAL_PORT select DMA_NONCOHERENT select GENERIC_ISA_DMA @@ -816,6 +816,10 @@ config GENERIC_CALIBRATE_DELAY bool default y +config SCHED_NO_NO_OMIT_FRAME_POINTER + bool + default y + # # Select some configuration options automatically based on user selections. # @@ -1063,6 +1067,7 @@ choice config CPU_MIPS32_R1 bool "MIPS32 Release 1" depends on SYS_HAS_CPU_MIPS32_R1 + select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_HIGHMEM @@ -1080,6 +1085,7 @@ config CPU_MIPS32_R1 config CPU_MIPS32_R2 bool "MIPS32 Release 2" depends on SYS_HAS_CPU_MIPS32_R2 + select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_HIGHMEM @@ -1093,6 +1099,7 @@ config CPU_MIPS32_R2 config CPU_MIPS64_R1 bool "MIPS64 Release 1" depends on SYS_HAS_CPU_MIPS64_R1 + select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL @@ -1111,6 +1118,7 @@ config CPU_MIPS64_R1 config CPU_MIPS64_R2 bool "MIPS64 Release 2" depends on SYS_HAS_CPU_MIPS64_R2 + select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL @@ -1125,6 +1133,7 @@ config CPU_MIPS64_R2 config CPU_R3000 bool "R3000" depends on SYS_HAS_CPU_R3000 + select CPU_HAS_WB select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_HIGHMEM help @@ -1154,6 +1163,7 @@ config CPU_VR41XX config CPU_R4300 bool "R4300" depends on SYS_HAS_CPU_R4300 + select CPU_HAS_LLSC select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL help @@ -1162,6 +1172,7 @@ config CPU_R4300 config CPU_R4X00 bool "R4x00" depends on SYS_HAS_CPU_R4X00 + select CPU_HAS_LLSC select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL help @@ -1171,6 +1182,7 @@ config CPU_R4X00 config CPU_TX49XX bool "R49XX" depends on SYS_HAS_CPU_TX49XX + select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL @@ -1178,6 +1190,7 @@ config CPU_TX49XX config CPU_R5000 bool "R5000" depends on SYS_HAS_CPU_R5000 + select CPU_HAS_LLSC select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL help @@ -1186,12 +1199,14 @@ config CPU_R5000 config CPU_R5432 bool "R5432" depends on SYS_HAS_CPU_R5432 + select CPU_HAS_LLSC select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL config CPU_R6000 bool "R6000" depends on EXPERIMENTAL + select CPU_HAS_LLSC depends on SYS_HAS_CPU_R6000 select CPU_SUPPORTS_32BIT_KERNEL help @@ -1201,6 +1216,7 @@ config CPU_R6000 config CPU_NEVADA bool "RM52xx" depends on SYS_HAS_CPU_NEVADA + select CPU_HAS_LLSC select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL help @@ -1210,6 +1226,7 @@ config CPU_R8000 bool "R8000" depends on EXPERIMENTAL depends on SYS_HAS_CPU_R8000 + select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_64BIT_KERNEL help @@ -1219,6 +1236,7 @@ config CPU_R8000 config CPU_R10000 bool "R10000" depends on SYS_HAS_CPU_R10000 + select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL @@ -1229,6 +1247,7 @@ config CPU_R10000 config CPU_RM7000 bool "RM7000" depends on SYS_HAS_CPU_RM7000 + select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL @@ -1237,6 +1256,7 @@ config CPU_RM7000 config CPU_RM9000 bool "RM9000" depends on SYS_HAS_CPU_RM9000 + select CPU_HAS_LLSC select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL @@ -1245,6 +1265,7 @@ config CPU_RM9000 config CPU_SB1 bool "SB1" depends on SYS_HAS_CPU_SB1 + select CPU_HAS_LLSC select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_HIGHMEM @@ -1390,13 +1411,12 @@ config PAGE_SIZE_8KB config PAGE_SIZE_16KB bool "16kB" - depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX + depends on !CPU_R3000 && !CPU_TX39XX help Using 16kB page size will result in higher performance kernel at the price of higher memory consumption. This option is available on - all non-R3000 family processor. Not that at the time of this - writing this option is still high experimental; there are also - issues with compatibility of user applications. + all non-R3000 family processors. Note that you will need a suitable + Linux distribution to support this. config PAGE_SIZE_64KB bool "64kB" @@ -1405,8 +1425,7 @@ config PAGE_SIZE_64KB Using 64kB page size will result in higher performance kernel at the price of higher memory consumption. This option is available on all non-R3000 family processor. Not that at the time of this - writing this option is still high experimental; there are also - issues with compatibility of user applications. + writing this option is still high experimental. endchoice @@ -1443,6 +1462,12 @@ choice prompt "MIPS MT options" depends on MIPS_MT +config MIPS_MT_SMTC + bool "SMTC: Use all TCs on all VPEs for SMP" + select CPU_MIPSR2_IRQ_VI + select CPU_MIPSR2_SRS + select SMP + config MIPS_MT_SMP bool "Use 1 TC on each available VPE for SMP" select SMP @@ -1456,6 +1481,11 @@ config MIPS_VPE_LOADER endchoice +config MIPS_MT_FPAFF + bool "Dynamic FPU affinity for FP-intensive threads" + depends on MIPS_MT + default y + config MIPS_VPE_LOADER_TOM bool "Load VPE program into memory hidden from linux" depends on MIPS_VPE_LOADER @@ -1472,6 +1502,16 @@ config MIPS_VPE_APSP_API depends on MIPS_VPE_LOADER help +config MIPS_APSP_KSPD + bool "Enable KSPD" + depends on MIPS_VPE_APSP_API + default y + help + KSPD is a kernel daemon that accepts syscall requests from the SP + side, actions them and returns the results. It also handles the + "exit" syscall notifying other kernel modules the SP program is + exiting. You probably want to say yes here. + config SB1_PASS_1_WORKAROUNDS bool depends on CPU_SB1_PASS_1 @@ -1491,38 +1531,15 @@ config 64BIT_PHYS_ADDR bool "Support for 64-bit physical address space" depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32 || CPU_MIPS64) && 32BIT -config CPU_ADVANCED - bool "Override CPU Options" - depends on 32BIT - help - Saying yes here allows you to select support for various features - your CPU may or may not have. Most people should say N here. - config CPU_HAS_LLSC - bool "ll/sc Instructions available" if CPU_ADVANCED - default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX - help - MIPS R4000 series and later provide the Load Linked (ll) - and Store Conditional (sc) instructions. More information is - available at <http://www.go-ecs.com/mips/miptek1.htm>. - - Say Y here if your CPU has the ll and sc instructions. Say Y here - for better performance, N if you don't know. You must say Y here - for multiprocessor machines. + bool config CPU_HAS_WB - bool "Writeback Buffer available" if CPU_ADVANCED - default y if !CPU_ADVANCED && CPU_R3000 && MACH_DECSTATION - help - Say N here for slightly better performance. You must say Y here for - machines which require flushing of write buffers in software. Saying - Y is the safe option; N may result in kernel malfunction and crashes. - -menu "MIPSR2 Interrupt handling" - depends on CPU_MIPSR2 && CPU_ADVANCED + bool config CPU_MIPSR2_IRQ_VI bool "Vectored interrupt mode" + depends on CPU_MIPSR2 help Vectored interrupt mode allowing faster dispatching of interrupts. The board support code needs to be written to take advantage of this @@ -1532,6 +1549,7 @@ config CPU_MIPSR2_IRQ_VI config CPU_MIPSR2_IRQ_EI bool "External interrupt controller mode" + depends on CPU_MIPSR2 help Extended interrupt mode takes advantage of an external interrupt controller to allow fast dispatching from many possible interrupt @@ -1545,7 +1563,6 @@ config CPU_MIPSR2_SRS Allow the kernel to use shadow register sets for fast interrupts. Interrupt handlers must be specially written to use shadow sets. Say N unless you know that shadow register set upport is needed. -endmenu config CPU_HAS_SYNC bool @@ -1599,7 +1616,7 @@ source "mm/Kconfig" config SMP bool "Multi-Processing support" - depends on CPU_RM9000 || ((SIBYTE_BCM1x80 || SIBYTE_BCM1x55 || SIBYTE_SB1250 || QEMU) && !SIBYTE_STANDALONE) || SGI_IP27 || MIPS_MT_SMP + depends on CPU_RM9000 || ((SIBYTE_BCM1x80 || SIBYTE_BCM1x55 || SIBYTE_SB1250 || QEMU) && !SIBYTE_STANDALONE) || SGI_IP27 || MIPS_MT_SMP || MIPS_MT_SMTC ---help--- This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If |