diff options
Diffstat (limited to 'arch/m68knommu/platform/68360/config.c')
| -rw-r--r-- | arch/m68knommu/platform/68360/config.c | 186 |
1 files changed, 0 insertions, 186 deletions
diff --git a/arch/m68knommu/platform/68360/config.c b/arch/m68knommu/platform/68360/config.c deleted file mode 100644 index 9dd5bca3874..00000000000 --- a/arch/m68knommu/platform/68360/config.c +++ /dev/null @@ -1,186 +0,0 @@ -/* - * linux/arch/m68knommu/platform/68360/config.c - * - * Copyright (c) 2000 Michael Leslie <mleslie@lineo.com> - * Copyright (C) 1993 Hamish Macdonald - * Copyright (C) 1999 D. Jeff Dionne <jeff@uclinux.org> - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - -#include <stdarg.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/interrupt.h> -#include <linux/irq.h> - -#include <asm/setup.h> -#include <asm/system.h> -#include <asm/pgtable.h> -#include <asm/machdep.h> -#include <asm/m68360.h> - -#ifdef CONFIG_UCQUICC -#include <asm/bootstd.h> -#endif - -extern void m360_cpm_reset(void); - -// Mask to select if the PLL prescaler is enabled. -#define MCU_PREEN ((unsigned short)(0x0001 << 13)) - -#if defined(CONFIG_UCQUICC) -#define OSCILLATOR (unsigned long int)33000000 -#endif - -unsigned long int system_clock; - -extern QUICC *pquicc; - -/* TODO DON"T Hard Code this */ -/* calculate properly using the right PLL and prescaller */ -// unsigned int system_clock = 33000000l; -extern unsigned long int system_clock; //In kernel setup.c - - -static irqreturn_t hw_tick(int irq, void *dummy) -{ - /* Reset Timer1 */ - /* TSTAT &= 0; */ - - pquicc->timer_ter1 = 0x0002; /* clear timer event */ - - return arch_timer_interrupt(irq, dummy); -} - -static struct irqaction m68360_timer_irq = { - .name = "timer", - .flags = IRQF_DISABLED | IRQF_TIMER, - .handler = hw_tick, -}; - -void hw_timer_init(void) -{ - unsigned char prescaler; - unsigned short tgcr_save; - -#if 0 - /* Restart mode, Enable int, 32KHz, Enable timer */ - TCTL = TCTL_OM | TCTL_IRQEN | TCTL_CLKSOURCE_32KHZ | TCTL_TEN; - /* Set prescaler (Divide 32KHz by 32)*/ - TPRER = 31; - /* Set compare register 32Khz / 32 / 10 = 100 */ - TCMP = 10; - - request_irq(IRQ_MACHSPEC | 1, timer_routine, 0, "timer", NULL); -#endif - - /* General purpose quicc timers: MC68360UM p7-20 */ - - /* Set up timer 1 (in [1..4]) to do 100Hz */ - tgcr_save = pquicc->timer_tgcr & 0xfff0; - pquicc->timer_tgcr = tgcr_save; /* stop and reset timer 1 */ - /* pquicc->timer_tgcr |= 0x4444; */ /* halt timers when FREEZE (ie bdm freeze) */ - - prescaler = 8; - pquicc->timer_tmr1 = 0x001a | /* or=1, frr=1, iclk=01b */ - (unsigned short)((prescaler - 1) << 8); - - pquicc->timer_tcn1 = 0x0000; /* initial count */ - /* calculate interval for 100Hz based on the _system_clock: */ - pquicc->timer_trr1 = (system_clock/ prescaler) / HZ; /* reference count */ - - pquicc->timer_ter1 = 0x0003; /* clear timer events */ - - /* enable timer 1 interrupt in CIMR */ - setup_irq(CPMVEC_TIMER1, &m68360_timer_irq); - - /* Start timer 1: */ - tgcr_save = (pquicc->timer_tgcr & 0xfff0) | 0x0001; - pquicc->timer_tgcr = tgcr_save; -} - -void BSP_gettod (int *yearp, int *monp, int *dayp, - int *hourp, int *minp, int *secp) -{ -} - -int BSP_set_clock_mmss(unsigned long nowtime) -{ -#if 0 - short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60; - - tod->second1 = real_seconds / 10; - tod->second2 = real_seconds % 10; - tod->minute1 = real_minutes / 10; - tod->minute2 = real_minutes % 10; -#endif - return 0; -} - -void BSP_reset (void) -{ - local_irq_disable(); - asm volatile ( - "moveal #_start, %a0;\n" - "moveb #0, 0xFFFFF300;\n" - "moveal 0(%a0), %sp;\n" - "moveal 4(%a0), %a0;\n" - "jmp (%a0);\n" - ); -} - -unsigned char *scc1_hwaddr; -static int errno; - -#if defined (CONFIG_UCQUICC) -_bsc0(char *, getserialnum) -_bsc1(unsigned char *, gethwaddr, int, a) -_bsc1(char *, getbenv, char *, a) -#endif - - -void config_BSP(char *command, int len) -{ - unsigned char *p; - - m360_cpm_reset(); - - /* Calculate the real system clock value. */ - { - unsigned int local_pllcr = (unsigned int)(pquicc->sim_pllcr); - if( local_pllcr & MCU_PREEN ) // If the prescaler is dividing by 128 - { - int mf = (int)(pquicc->sim_pllcr & 0x0fff); - system_clock = (OSCILLATOR / 128) * (mf + 1); - } - else - { - int mf = (int)(pquicc->sim_pllcr & 0x0fff); - system_clock = (OSCILLATOR) * (mf + 1); - } - } - - printk(KERN_INFO "\n68360 QUICC support (C) 2000 Lineo Inc.\n"); - -#if defined(CONFIG_UCQUICC) && 0 - printk(KERN_INFO "uCquicc serial string [%s]\n",getserialnum()); - p = scc1_hwaddr = gethwaddr(0); - printk(KERN_INFO "uCquicc hwaddr %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n", - p[0], p[1], p[2], p[3], p[4], p[5]); - - p = getbenv("APPEND"); - if (p) - strcpy(p,command); - else - command[0] = 0; -#else - scc1_hwaddr = "\00\01\02\03\04\05"; -#endif - - mach_gettod = BSP_gettod; - mach_reset = BSP_reset; -} |