diff options
Diffstat (limited to 'arch/m68k/math-emu/fp_movem.S')
| -rw-r--r-- | arch/m68k/math-emu/fp_movem.S | 368 |
1 files changed, 368 insertions, 0 deletions
diff --git a/arch/m68k/math-emu/fp_movem.S b/arch/m68k/math-emu/fp_movem.S new file mode 100644 index 00000000000..8354d39e6c4 --- /dev/null +++ b/arch/m68k/math-emu/fp_movem.S @@ -0,0 +1,368 @@ +/* + * fp_movem.S + * + * Copyright Roman Zippel, 1997. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, and the entire permission notice in its entirety, + * including the disclaimer of warranties. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote + * products derived from this software without specific prior + * written permission. + * + * ALTERNATIVELY, this product may be distributed under the terms of + * the GNU General Public License, in which case the provisions of the GPL are + * required INSTEAD OF the above restrictions. (This clause is + * necessary due to a potential bad interaction between the GPL and + * the restrictions contained in a BSD-style copyright.) + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "fp_emu.h" +#include "fp_decode.h" + +| set flags for decode macros for fmovem +do_fmovem=1 + + .globl fp_fmovem_fp, fp_fmovem_cr + +| %d1 contains the mask and count of the register list +| for other register usage see fp_decode.h + +fp_fmovem_fp: + printf PDECODE,"fmovem.x " + | get register list and count them + btst #11,%d2 + jne 1f + bfextu %d2{#24,#8},%d0 | static register list + jra 2f +1: bfextu %d2{#25,#3},%d0 | dynamic register list + jsr fp_get_data_reg +2: move.l %d0,%d1 + swap %d1 + jra 2f +1: addq.w #1,%d1 | count the # of registers in +2: lsr.b #1,%d0 | register list and keep it in %d1 + jcs 1b + jne 2b + printf PDECODE,"#%08x",1,%d1 +#ifdef FPU_EMU_DEBUG + btst #12,%d2 + jne 1f + printf PDECODE,"-" | decremental move + jra 2f +1: printf PDECODE,"+" | incremental move +2: btst #13,%d2 + jeq 1f + printf PDECODE,"->" | fpu -> cpu + jra 2f +1: printf PDECODE,"<-" | fpu <- cpu +2: +#endif + + | decode address mode + fp_decode_addr_mode + + .long fp_ill, fp_ill + .long fpr_indirect, fpr_postinc + .long fpr_predecr, fpr_disp16 + .long fpr_extmode0, fpr_extmode1 + + | addressing mode: address register indirect +fpr_indirect: + fp_mode_addr_indirect + jra fpr_do_movem + + | addressing mode: address register indirect with postincrement +fpr_postinc: + fp_mode_addr_indirect_postinc + jra fpr_do_movem + +fpr_predecr: + fp_mode_addr_indirect_predec + jra fpr_do_movem + + | addressing mode: address register/programm counter indirect + | with 16bit displacement +fpr_disp16: + fp_mode_addr_indirect_disp16 + jra fpr_do_movem + +fpr_extmode0: + fp_mode_addr_indirect_extmode0 + jra fpr_do_movem + +fpr_extmode1: + fp_decode_addr_reg + jmp ([0f:w,%pc,%d0*4]) + + .align 4 +0: + .long fpr_absolute_short, fpr_absolute_long + .long fpr_disp16, fpr_extmode0 + .long fp_ill, fp_ill + .long fp_ill, fp_ill + +fpr_absolute_short: + fp_mode_abs_short + jra fpr_do_movem + +fpr_absolute_long: + fp_mode_abs_long +| jra fpr_do_movem + +fpr_do_movem: + swap %d1 | get fpu register list + lea (FPD_FPREG,FPDATA),%a1 + moveq #12,%d0 + btst #12,%d2 + jne 1f + lea (-12,%a1,%d0*8),%a1 + neg.l %d0 +1: btst #13,%d2 + jne 4f + | move register from memory into fpu + jra 3f +1: printf PMOVEM,"(%p>%p)",2,%a0,%a1 + getuser.l (%a0)+,%d2,fp_err_ua1,%a0 + lsr.l #8,%d2 + lsr.l #7,%d2 + lsr.w #1,%d2 + move.l %d2,(%a1)+ + getuser.l (%a0)+,%d2,fp_err_ua1,%a0 + move.l %d2,(%a1)+ + getuser.l (%a0),%d2,fp_err_ua1,%a0 + move.l %d2,(%a1) + subq.l #8,%a0 + subq.l #8,%a1 + add.l %d0,%a0 +2: add.l %d0,%a1 +3: lsl.b #1,%d1 + jcs 1b + jne 2b + jra 5f + | move register from fpu into memory +1: printf PMOVEM,"(%p>%p)",2,%a1,%a0 + move.l (%a1)+,%d2 + lsl.w #1,%d2 + lsl.l #7,%d2 + lsl.l #8,%d2 + putuser.l %d2,(%a0)+,fp_err_ua1,%a0 + move.l (%a1)+,%d2 + putuser.l %d2,(%a0)+,fp_err_ua1,%a0 + move.l (%a1),%d2 + putuser.l %d2,(%a0),fp_err_ua1,%a0 + subq.l #8,%a1 + subq.l #8,%a0 + add.l %d0,%a0 +2: add.l %d0,%a1 +4: lsl.b #1,%d1 + jcs 1b + jne 2b +5: + printf PDECODE,"\n" +#if 0 + lea (FPD_FPREG,FPDATA),%a0 + printf PMOVEM,"fp:" + printx PMOVEM,%a0@(0) + printx PMOVEM,%a0@(12) + printf PMOVEM,"\n " + printx PMOVEM,%a0@(24) + printx PMOVEM,%a0@(36) + printf PMOVEM,"\n " + printx PMOVEM,%a0@(48) + printx PMOVEM,%a0@(60) + printf PMOVEM,"\n " + printx PMOVEM,%a0@(72) + printx PMOVEM,%a0@(84) + printf PMOVEM,"\n" +#endif + jra fp_end + +| set flags for decode macros for fmovem control register +do_fmovem=1 +do_fmovem_cr=1 + +fp_fmovem_cr: + printf PDECODE,"fmovem.cr " + | get register list and count them + bfextu %d2{#19,#3},%d0 + move.l %d0,%d1 + swap %d1 + jra 2f +1: addq.w #1,%d1 +2: lsr.l #1,%d0 + jcs 1b + jne 2b + printf PDECODE,"#%08x",1,%d1 +#ifdef FPU_EMU_DEBUG + btst #13,%d2 + jeq 1f + printf PDECODE,"->" | fpu -> cpu + jra 2f +1: printf PDECODE,"<-" | fpu <- cpu +2: +#endif + + | decode address mode + fp_decode_addr_mode + + .long fpc_data, fpc_addr + .long fpc_indirect, fpc_postinc + .long fpc_predecr, fpc_disp16 + .long fpc_extmode0, fpc_extmode1 + +fpc_data: + fp_mode_data_direct + move.w %d0,%d1 + bfffo %d2{#19,#3},%d0 + sub.w #19,%d0 + lea (FPD_FPCR,FPDATA,%d0.w*4),%a1 + btst #13,%d2 + jne 1f + move.w %d1,%d0 + jsr fp_get_data_reg + move.l %d0,(%a1) + jra fpc_movem_fin +1: move.l (%a1),%d0 + jsr fp_put_data_reg + jra fpc_movem_fin + +fpc_addr: + fp_decode_addr_reg + printf PDECODE,"a%d",1,%d0 + btst #13,%d2 + jne 1f + jsr fp_get_addr_reg + move.l %a0,(FPD_FPIAR,FPDATA) + jra fpc_movem_fin +1: move.l (FPD_FPIAR,FPDATA),%a0 + jsr fp_put_addr_reg + jra fpc_movem_fin + +fpc_indirect: + fp_mode_addr_indirect + jra fpc_do_movem + +fpc_postinc: + fp_mode_addr_indirect_postinc + jra fpc_do_movem + +fpc_predecr: + fp_mode_addr_indirect_predec + jra fpc_do_movem + +fpc_disp16: + fp_mode_addr_indirect_disp16 + jra fpc_do_movem + +fpc_extmode0: + fp_mode_addr_indirect_extmode0 + jra fpc_do_movem + +fpc_extmode1: + fp_decode_addr_reg + jmp ([0f:w,%pc,%d0*4]) + + .align 4 +0: + .long fpc_absolute_short, fpc_absolute_long + .long fpc_disp16, fpc_extmode0 + .long fpc_immediate, fp_ill + .long fp_ill, fp_ill + +fpc_absolute_short: + fp_mode_abs_short + jra fpc_do_movem + +fpc_absolute_long: + fp_mode_abs_long + jra fpc_do_movem + +fpc_immediate: + fp_get_pc %a0 + lea (%a0,%d1.w*4),%a1 + fp_put_pc %a1 + printf PDECODE,"#imm" +| jra fpc_do_movem +#if 0 + swap %d1 + lsl.l #5,%d1 + lea (FPD_FPCR,FPDATA),%a0 + jra 3f +1: move.l %d0,(%a0) +2: addq.l #4,%a0 +3: lsl.b #1,%d1 + jcs 1b + jne 2b + jra fpc_movem_fin +#endif + +fpc_do_movem: + swap %d1 | get fpu register list + lsl.l #5,%d1 + lea (FPD_FPCR,FPDATA),%a1 +1: btst #13,%d2 + jne 4f + + | move register from memory into fpu + jra 3f +1: printf PMOVEM,"(%p>%p)",2,%a0,%a1 + getuser.l (%a0)+,%d0,fp_err_ua1,%a0 + move.l %d0,(%a1) +2: addq.l #4,%a1 +3: lsl.b #1,%d1 + jcs 1b + jne 2b + jra fpc_movem_fin + + | move register from fpu into memory +1: printf PMOVEM,"(%p>%p)",2,%a1,%a0 + move.l (%a1),%d0 + putuser.l %d0,(%a0)+,fp_err_ua1,%a0 +2: addq.l #4,%a1 +4: lsl.b #1,%d1 + jcs 1b + jne 2b + +fpc_movem_fin: + and.l #0x0000fff0,(FPD_FPCR,FPDATA) + and.l #0x0ffffff8,(FPD_FPSR,FPDATA) + move.l (FPD_FPCR,FPDATA),%d0 + lsr.l #4,%d0 + moveq #3,%d1 + and.l %d0,%d1 + move.w %d1,(FPD_RND,FPDATA) + lsr.l #2,%d0 + moveq #3,%d1 + and.l %d0,%d1 + move.w %d1,(FPD_PREC,FPDATA) + printf PDECODE,"\n" +#if 0 + printf PMOVEM,"fpcr : %08x\n",1,FPDATA@(FPD_FPCR) + printf PMOVEM,"fpsr : %08x\n",1,FPDATA@(FPD_FPSR) + printf PMOVEM,"fpiar: %08x\n",1,FPDATA@(FPD_FPIAR) + clr.l %d0 + move.w (FPD_PREC,FPDATA),%d0 + printf PMOVEM,"prec : %04x\n",1,%d0 + move.w (FPD_RND,FPDATA),%d0 + printf PMOVEM,"rnd : %04x\n",1,%d0 +#endif + jra fp_end |