diff options
Diffstat (limited to 'arch/m68k/mac')
| -rw-r--r-- | arch/m68k/mac/baboon.c | 41 | ||||
| -rw-r--r-- | arch/m68k/mac/config.c | 93 | ||||
| -rw-r--r-- | arch/m68k/mac/iop.c | 8 | ||||
| -rw-r--r-- | arch/m68k/mac/macints.c | 197 | ||||
| -rw-r--r-- | arch/m68k/mac/oss.c | 157 | ||||
| -rw-r--r-- | arch/m68k/mac/psc.c | 17 | ||||
| -rw-r--r-- | arch/m68k/mac/via.c | 255 |
7 files changed, 295 insertions, 473 deletions
diff --git a/arch/m68k/mac/baboon.c b/arch/m68k/mac/baboon.c index b403924a1ca..3fe0e43d44f 100644 --- a/arch/m68k/mac/baboon.c +++ b/arch/m68k/mac/baboon.c @@ -8,13 +8,8 @@ #include <linux/types.h> #include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/delay.h> -#include <linux/init.h> #include <linux/irq.h> -#include <asm/traps.h> -#include <asm/bootinfo.h> #include <asm/macintosh.h> #include <asm/macints.h> #include <asm/mac_baboon.h> @@ -23,7 +18,6 @@ int baboon_present; static volatile struct baboon *baboon; -static unsigned char baboon_disabled; #if 0 extern int macide_ack_intr(struct ata_channel *); @@ -89,51 +83,32 @@ static void baboon_irq(unsigned int irq, struct irq_desc *desc) void __init baboon_register_interrupts(void) { - baboon_disabled = 0; irq_set_chained_handler(IRQ_NUBUS_C, baboon_irq); } /* - * The means for masking individual baboon interrupts remains a mystery, so - * enable the umbrella interrupt only when no baboon interrupt is disabled. + * The means for masking individual Baboon interrupts remains a mystery. + * However, since we only use the IDE IRQ, we can just enable/disable all + * Baboon interrupts. If/when we handle more than one Baboon IRQ, we must + * either figure out how to mask them individually or else implement the + * same workaround that's used for NuBus slots (see nubus_disabled and + * via_nubus_irq_shutdown). */ void baboon_irq_enable(int irq) { - int irq_idx = IRQ_IDX(irq); - #ifdef DEBUG_IRQUSE printk("baboon_irq_enable(%d)\n", irq); #endif - baboon_disabled &= ~(1 << irq_idx); - if (!baboon_disabled) - mac_irq_enable(irq_get_irq_data(IRQ_NUBUS_C)); + mac_irq_enable(irq_get_irq_data(IRQ_NUBUS_C)); } void baboon_irq_disable(int irq) { - int irq_idx = IRQ_IDX(irq); - #ifdef DEBUG_IRQUSE printk("baboon_irq_disable(%d)\n", irq); #endif - baboon_disabled |= 1 << irq_idx; - if (baboon_disabled) - mac_irq_disable(irq_get_irq_data(IRQ_NUBUS_C)); -} - -void baboon_irq_clear(int irq) -{ - int irq_idx = IRQ_IDX(irq); - - baboon->mb_ifr &= ~(1 << irq_idx); -} - -int baboon_irq_pending(int irq) -{ - int irq_idx = IRQ_IDX(irq); - - return baboon->mb_ifr & (1 << irq_idx); + mac_irq_disable(irq_get_irq_data(IRQ_NUBUS_C)); } diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c index c247de02bc7..f60ff5f5920 100644 --- a/arch/m68k/mac/config.c +++ b/arch/m68k/mac/config.c @@ -71,6 +71,31 @@ static void mac_get_model(char *str); static void mac_identify(void); static void mac_report_hardware(void); +#ifdef CONFIG_EARLY_PRINTK +asmlinkage void __init mac_early_print(const char *s, unsigned n); + +static void __init mac_early_cons_write(struct console *con, + const char *s, unsigned n) +{ + mac_early_print(s, n); +} + +static struct console __initdata mac_early_cons = { + .name = "early", + .write = mac_early_cons_write, + .flags = CON_PRINTBUFFER | CON_BOOT, + .index = -1 +}; + +int __init mac_unregister_early_cons(void) +{ + /* mac_early_print can't be used after init sections are discarded */ + return unregister_console(&mac_early_cons); +} + +late_initcall(mac_unregister_early_cons); +#endif + static void __init mac_sched_init(irq_handler_t vector) { via_init_clock(vector); @@ -164,6 +189,10 @@ void __init config_mac(void) mach_beep = mac_mksound; #endif +#ifdef CONFIG_EARLY_PRINTK + register_console(&mac_early_cons); +#endif + /* * Determine hardware present */ @@ -192,7 +221,7 @@ void __init config_mac(void) * inaccurate, so look here if a new Mac model won't run. Example: if * a Mac crashes immediately after the VIA1 registers have been dumped * to the screen, it probably died attempting to read DirB on a RBV. - * Meaning it should have MAC_VIA_IIci here :-) + * Meaning it should have MAC_VIA_IICI here :-) */ struct mac_model *macintosh_config; @@ -267,7 +296,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_IICI, .name = "IIci", .adb_type = MAC_ADB_II, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -276,7 +305,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_IIFX, .name = "IIfx", .adb_type = MAC_ADB_IOP, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_IOP, .nubus_type = MAC_NUBUS, @@ -285,7 +314,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_IISI, .name = "IIsi", .adb_type = MAC_ADB_IISI, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -294,7 +323,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_IIVI, .name = "IIvi", .adb_type = MAC_ADB_IISI, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -303,7 +332,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_IIVX, .name = "IIvx", .adb_type = MAC_ADB_IISI, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -318,7 +347,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_CLII, .name = "Classic II", .adb_type = MAC_ADB_IISI, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -327,7 +356,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_CCL, .name = "Color Classic", .adb_type = MAC_ADB_CUDA, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -336,7 +365,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_CCLII, .name = "Color Classic II", .adb_type = MAC_ADB_CUDA, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -351,7 +380,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_LC, .name = "LC", .adb_type = MAC_ADB_IISI, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -360,7 +389,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_LCII, .name = "LC II", .adb_type = MAC_ADB_IISI, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -369,7 +398,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_LCIII, .name = "LC III", .adb_type = MAC_ADB_IISI, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -497,7 +526,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_P460, .name = "Performa 460", .adb_type = MAC_ADB_IISI, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -524,7 +553,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_P520, .name = "Performa 520", .adb_type = MAC_ADB_CUDA, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -533,7 +562,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_P550, .name = "Performa 550", .adb_type = MAC_ADB_CUDA, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -565,7 +594,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_TV, .name = "TV", .adb_type = MAC_ADB_CUDA, - .via_type = MAC_VIA_QUADRA, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -574,7 +603,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_P600, .name = "Performa 600", .adb_type = MAC_ADB_IISI, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -645,8 +674,8 @@ static struct mac_model mac_data_table[] = { }, { .ident = MAC_MODEL_PB150, .name = "PowerBook 150", - .adb_type = MAC_ADB_PB1, - .via_type = MAC_VIA_IIci, + .adb_type = MAC_ADB_PB2, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .ide_type = MAC_IDE_PB, .scc_type = MAC_SCC_QUADRA, @@ -732,17 +761,13 @@ static struct mac_model mac_data_table[] = { * PowerBook Duos are pretty much like normal PowerBooks * All of these probably have onboard SONIC in the Dock which * means we'll have to probe for it eventually. - * - * Are these really MAC_VIA_IIci? The developer notes for the - * Duos show pretty much the same custom parts as in most of - * the other PowerBooks which would imply MAC_VIA_QUADRA. */ { .ident = MAC_MODEL_PB210, .name = "PowerBook Duo 210", .adb_type = MAC_ADB_PB2, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_QUADRA, .nubus_type = MAC_NUBUS, @@ -751,7 +776,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_PB230, .name = "PowerBook Duo 230", .adb_type = MAC_ADB_PB2, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_QUADRA, .nubus_type = MAC_NUBUS, @@ -760,7 +785,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_PB250, .name = "PowerBook Duo 250", .adb_type = MAC_ADB_PB2, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_QUADRA, .nubus_type = MAC_NUBUS, @@ -769,7 +794,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_PB270C, .name = "PowerBook Duo 270c", .adb_type = MAC_ADB_PB2, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_QUADRA, .nubus_type = MAC_NUBUS, @@ -778,7 +803,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_PB280, .name = "PowerBook Duo 280", .adb_type = MAC_ADB_PB2, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_QUADRA, .nubus_type = MAC_NUBUS, @@ -787,7 +812,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_PB280C, .name = "PowerBook Duo 280c", .adb_type = MAC_ADB_PB2, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_QUADRA, .nubus_type = MAC_NUBUS, @@ -864,8 +889,14 @@ static void __init mac_identify(void) scc_b_rsrcs[1].start = scc_b_rsrcs[1].end = IRQ_MAC_SCC_B; break; default: - scc_a_rsrcs[1].start = scc_a_rsrcs[1].end = IRQ_MAC_SCC; - scc_b_rsrcs[1].start = scc_b_rsrcs[1].end = IRQ_MAC_SCC; + /* On non-PSC machines, the serial ports share an IRQ. */ + if (macintosh_config->ident == MAC_MODEL_IIFX) { + scc_a_rsrcs[1].start = scc_a_rsrcs[1].end = IRQ_MAC_SCC; + scc_b_rsrcs[1].start = scc_b_rsrcs[1].end = IRQ_MAC_SCC; + } else { + scc_a_rsrcs[1].start = scc_a_rsrcs[1].end = IRQ_AUTO_4; + scc_b_rsrcs[1].start = scc_b_rsrcs[1].end = IRQ_AUTO_4; + } break; } diff --git a/arch/m68k/mac/iop.c b/arch/m68k/mac/iop.c index a5462cc0bfd..7d8d46127ad 100644 --- a/arch/m68k/mac/iop.c +++ b/arch/m68k/mac/iop.c @@ -115,7 +115,6 @@ #include <asm/macintosh.h> #include <asm/macints.h> #include <asm/mac_iop.h> -#include <asm/mac_oss.h> /*#define DEBUG_IOP*/ @@ -149,8 +148,6 @@ static struct listener iop_listeners[NUM_IOPS][NUM_IOP_CHAN]; irqreturn_t iop_ism_irq(int, void *); -extern void oss_irq_enable(int); - /* * Private access functions */ @@ -304,11 +301,10 @@ void __init iop_init(void) void __init iop_register_interrupts(void) { if (iop_ism_present) { - if (oss_present) { - if (request_irq(OSS_IRQLEV_IOPISM, iop_ism_irq, 0, + if (macintosh_config->ident == MAC_MODEL_IIFX) { + if (request_irq(IRQ_MAC_ADB, iop_ism_irq, 0, "ISM IOP", (void *)IOP_NUM_ISM)) pr_err("Couldn't register ISM IOP interrupt\n"); - oss_irq_enable(IRQ_MAC_ADB); } else { if (request_irq(IRQ_VIA2_0, iop_ism_irq, 0, "ISM IOP", (void *)IOP_NUM_ISM)) diff --git a/arch/m68k/mac/macints.c b/arch/m68k/mac/macints.c index ba220b70ab8..5c1a6b2ff0a 100644 --- a/arch/m68k/mac/macints.c +++ b/arch/m68k/mac/macints.c @@ -26,10 +26,6 @@ * - slot 6: timer 1 (not on IIci) * - slot 7: status of IRQ; signals 'any enabled int.' * - * 2 - OSS (IIfx only?) - * - slot 0: SCSI interrupt - * - slot 1: Sound interrupt - * * Levels 3-6 vary by machine type. For VIA or RBV Macintoshes: * * 3 - unused (?) @@ -42,21 +38,30 @@ * * 6 - off switch (?) * - * For OSS Macintoshes (IIfx only at this point): + * Machines with Quadra-like VIA hardware, except PSC and PMU machines, support + * an alternate interrupt mapping, as used by A/UX. It spreads ethernet and + * sound out to their own autovector IRQs and gives VIA1 a higher priority: * - * 3 - Nubus interrupt - * - slot 0: Slot $9 - * - slot 1: Slot $A - * - slot 2: Slot $B - * - slot 3: Slot $C - * - slot 4: Slot $D - * - slot 5: Slot $E + * 1 - unused (?) * - * 4 - SCC IOP + * 3 - on-board SONIC + * + * 5 - Apple Sound Chip (ASC) + * + * 6 - VIA1 + * + * For OSS Macintoshes (IIfx only), we apply an interrupt mapping similar to + * the Quadra (A/UX) mapping: + * + * 1 - ISM IOP (ADB) * - * 5 - ISM IOP (ADB?) + * 2 - SCSI * - * 6 - unused + * 3 - NuBus + * + * 4 - SCC IOP + * + * 6 - VIA1 * * For PSC Macintoshes (660AV, 840AV): * @@ -100,88 +105,29 @@ * case. They're hidden behind the Nubus slot $C interrupt thus adding a * third layer of indirection. Why oh why did the Apple engineers do that? * - * - We support "fast" and "slow" handlers, just like the Amiga port. The - * fast handlers are called first and with all interrupts disabled. They - * are expected to execute quickly (hence the name). The slow handlers are - * called last with interrupts enabled and the interrupt level restored. - * They must therefore be reentrant. - * - * TODO: - * */ -#include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> #include <linux/sched.h> -#include <linux/kernel_stat.h> -#include <linux/interrupt.h> /* for intr_count */ +#include <linux/interrupt.h> +#include <linux/irq.h> #include <linux/delay.h> -#include <linux/seq_file.h> -#include <asm/system.h> #include <asm/irq.h> -#include <asm/traps.h> -#include <asm/bootinfo.h> #include <asm/macintosh.h> +#include <asm/macints.h> #include <asm/mac_via.h> #include <asm/mac_psc.h> +#include <asm/mac_oss.h> +#include <asm/mac_iop.h> +#include <asm/mac_baboon.h> #include <asm/hwtest.h> -#include <asm/errno.h> -#include <asm/macints.h> #include <asm/irq_regs.h> -#include <asm/mac_oss.h> #define SHUTUP_SONIC /* - * VIA/RBV hooks - */ - -extern void via_register_interrupts(void); -extern void via_irq_enable(int); -extern void via_irq_disable(int); -extern void via_irq_clear(int); -extern int via_irq_pending(int); - -/* - * OSS hooks - */ - -extern void oss_register_interrupts(void); -extern void oss_irq_enable(int); -extern void oss_irq_disable(int); -extern void oss_irq_clear(int); -extern int oss_irq_pending(int); - -/* - * PSC hooks - */ - -extern void psc_register_interrupts(void); -extern void psc_irq_enable(int); -extern void psc_irq_disable(int); -extern void psc_irq_clear(int); -extern int psc_irq_pending(int); - -/* - * IOP hooks - */ - -extern void iop_register_interrupts(void); - -/* - * Baboon hooks - */ - -extern int baboon_present; - -extern void baboon_register_interrupts(void); -extern void baboon_irq_enable(int); -extern void baboon_irq_disable(int); -extern void baboon_irq_clear(int); - -/* * console_loglevel determines NMI handler function */ @@ -190,10 +136,15 @@ irqreturn_t mac_debug_handler(int, void *); /* #define DEBUG_MACINTS */ +static unsigned int mac_irq_startup(struct irq_data *); +static void mac_irq_shutdown(struct irq_data *); + static struct irq_chip mac_irq_chip = { .name = "mac", .irq_enable = mac_irq_enable, .irq_disable = mac_irq_disable, + .irq_startup = mac_irq_startup, + .irq_shutdown = mac_irq_shutdown, }; void __init mac_init_IRQ(void) @@ -239,8 +190,6 @@ void __init mac_init_IRQ(void) /* * mac_irq_enable - enable an interrupt source * mac_irq_disable - disable an interrupt source - * mac_clear_irq - clears a pending interrupt - * mac_irq_pending - returns the pending status of an IRQ (nonzero = pending) * * These routines are just dispatchers to the VIA/OSS/PSC routines. */ @@ -252,8 +201,6 @@ void mac_irq_enable(struct irq_data *data) switch(irq_src) { case 1: - via_irq_enable(irq); - break; case 2: case 7: if (oss_present) @@ -262,6 +209,7 @@ void mac_irq_enable(struct irq_data *data) via_irq_enable(irq); break; case 3: + case 4: case 5: case 6: if (psc_present) @@ -269,10 +217,6 @@ void mac_irq_enable(struct irq_data *data) else if (oss_present) oss_irq_enable(irq); break; - case 4: - if (psc_present) - psc_irq_enable(irq); - break; case 8: if (baboon_present) baboon_irq_enable(irq); @@ -287,8 +231,6 @@ void mac_irq_disable(struct irq_data *data) switch(irq_src) { case 1: - via_irq_disable(irq); - break; case 2: case 7: if (oss_present) @@ -297,6 +239,7 @@ void mac_irq_disable(struct irq_data *data) via_irq_disable(irq); break; case 3: + case 4: case 5: case 6: if (psc_present) @@ -304,10 +247,6 @@ void mac_irq_disable(struct irq_data *data) else if (oss_present) oss_irq_disable(irq); break; - case 4: - if (psc_present) - psc_irq_disable(irq); - break; case 8: if (baboon_present) baboon_irq_disable(irq); @@ -315,65 +254,27 @@ void mac_irq_disable(struct irq_data *data) } } -void mac_clear_irq(unsigned int irq) +static unsigned int mac_irq_startup(struct irq_data *data) { - switch(IRQ_SRC(irq)) { - case 1: - via_irq_clear(irq); - break; - case 2: - case 7: - if (oss_present) - oss_irq_clear(irq); - else - via_irq_clear(irq); - break; - case 3: - case 5: - case 6: - if (psc_present) - psc_irq_clear(irq); - else if (oss_present) - oss_irq_clear(irq); - break; - case 4: - if (psc_present) - psc_irq_clear(irq); - break; - case 8: - if (baboon_present) - baboon_irq_clear(irq); - break; - } + int irq = data->irq; + + if (IRQ_SRC(irq) == 7 && !oss_present) + via_nubus_irq_startup(irq); + else + mac_irq_enable(data); + + return 0; } -int mac_irq_pending(unsigned int irq) +static void mac_irq_shutdown(struct irq_data *data) { - switch(IRQ_SRC(irq)) { - case 1: - return via_irq_pending(irq); - case 2: - case 7: - if (oss_present) - return oss_irq_pending(irq); - else - return via_irq_pending(irq); - case 3: - case 5: - case 6: - if (psc_present) - return psc_irq_pending(irq); - else if (oss_present) - return oss_irq_pending(irq); - break; - case 4: - if (psc_present) - return psc_irq_pending(irq); - break; - } - return 0; + int irq = data->irq; + + if (IRQ_SRC(irq) == 7 && !oss_present) + via_nubus_irq_shutdown(irq); + else + mac_irq_disable(data); } -EXPORT_SYMBOL(mac_irq_pending); static int num_debug[8]; diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c index a4c82dab9ff..6c4c882c126 100644 --- a/arch/m68k/mac/oss.c +++ b/arch/m68k/mac/oss.c @@ -1,5 +1,5 @@ /* - * OSS handling + * Operating System Services (OSS) chip handling * Written by Joshua M. Thompson (funaho@jurai.org) * * @@ -30,8 +30,6 @@ int oss_present; volatile struct mac_oss *oss; -extern void via1_irq(unsigned int irq, struct irq_desc *desc); - /* * Initialize the OSS * @@ -51,10 +49,8 @@ void __init oss_init(void) /* do this by setting the source's interrupt level to zero. */ for (i = 0; i <= OSS_NUM_SOURCES; i++) { - oss->irq_level[i] = OSS_IRQLEV_DISABLED; + oss->irq_level[i] = 0; } - /* If we disable VIA1 here, we never really handle it... */ - oss->irq_level[OSS_VIA1] = OSS_IRQLEV_VIA1; } /* @@ -66,17 +62,13 @@ void __init oss_nubus_init(void) } /* - * Handle miscellaneous OSS interrupts. Right now that's just sound - * and SCSI; everything else is routed to its own autovector IRQ. + * Handle miscellaneous OSS interrupts. */ static void oss_irq(unsigned int irq, struct irq_desc *desc) { - int events; - - events = oss->irq_pending & (OSS_IP_SOUND|OSS_IP_SCSI); - if (!events) - return; + int events = oss->irq_pending & + (OSS_IP_IOPSCC | OSS_IP_SCSI | OSS_IP_IOPISM); #ifdef DEBUG_IRQS if ((console_loglevel == 10) && !(events & OSS_IP_SCSI)) { @@ -84,16 +76,20 @@ static void oss_irq(unsigned int irq, struct irq_desc *desc) (int) oss->irq_pending); } #endif - /* FIXME: how do you clear a pending IRQ? */ - if (events & OSS_IP_SOUND) { - oss->irq_pending &= ~OSS_IP_SOUND; - /* FIXME: call sound handler */ - } else if (events & OSS_IP_SCSI) { + if (events & OSS_IP_IOPSCC) { + oss->irq_pending &= ~OSS_IP_IOPSCC; + generic_handle_irq(IRQ_MAC_SCC); + } + + if (events & OSS_IP_SCSI) { oss->irq_pending &= ~OSS_IP_SCSI; generic_handle_irq(IRQ_MAC_SCSI); - } else { - /* FIXME: error check here? */ + } + + if (events & OSS_IP_IOPISM) { + oss->irq_pending &= ~OSS_IP_IOPISM; + generic_handle_irq(IRQ_MAC_ADB); } } @@ -132,14 +128,29 @@ static void oss_nubus_irq(unsigned int irq, struct irq_desc *desc) /* * Register the OSS and NuBus interrupt dispatchers. + * + * This IRQ mapping is laid out with two things in mind: first, we try to keep + * things on their own levels to avoid having to do double-dispatches. Second, + * the levels match as closely as possible the alternate IRQ mapping mode (aka + * "A/UX mode") available on some VIA machines. */ +#define OSS_IRQLEV_IOPISM IRQ_AUTO_1 +#define OSS_IRQLEV_SCSI IRQ_AUTO_2 +#define OSS_IRQLEV_NUBUS IRQ_AUTO_3 +#define OSS_IRQLEV_IOPSCC IRQ_AUTO_4 +#define OSS_IRQLEV_VIA1 IRQ_AUTO_6 + void __init oss_register_interrupts(void) { - irq_set_chained_handler(OSS_IRQLEV_SCSI, oss_irq); - irq_set_chained_handler(OSS_IRQLEV_NUBUS, oss_nubus_irq); - irq_set_chained_handler(OSS_IRQLEV_SOUND, oss_irq); - irq_set_chained_handler(OSS_IRQLEV_VIA1, via1_irq); + irq_set_chained_handler(OSS_IRQLEV_IOPISM, oss_irq); + irq_set_chained_handler(OSS_IRQLEV_SCSI, oss_irq); + irq_set_chained_handler(OSS_IRQLEV_NUBUS, oss_nubus_irq); + irq_set_chained_handler(OSS_IRQLEV_IOPSCC, oss_irq); + irq_set_chained_handler(OSS_IRQLEV_VIA1, via1_irq); + + /* OSS_VIA1 gets enabled here because it has no machspec interrupt. */ + oss->irq_level[OSS_VIA1] = IRQ_AUTO_6; } /* @@ -158,13 +169,13 @@ void oss_irq_enable(int irq) { switch(irq) { case IRQ_MAC_SCC: oss->irq_level[OSS_IOPSCC] = OSS_IRQLEV_IOPSCC; - break; + return; case IRQ_MAC_ADB: oss->irq_level[OSS_IOPISM] = OSS_IRQLEV_IOPISM; - break; + return; case IRQ_MAC_SCSI: oss->irq_level[OSS_SCSI] = OSS_IRQLEV_SCSI; - break; + return; case IRQ_NUBUS_9: case IRQ_NUBUS_A: case IRQ_NUBUS_B: @@ -173,13 +184,11 @@ void oss_irq_enable(int irq) { case IRQ_NUBUS_E: irq -= NUBUS_SOURCE_BASE; oss->irq_level[irq] = OSS_IRQLEV_NUBUS; - break; -#ifdef DEBUG_IRQUSE - default: - printk("%s unknown irq %d\n", __func__, irq); - break; -#endif + return; } + + if (IRQ_SRC(irq) == 1) + via_irq_enable(irq); } /* @@ -195,50 +204,14 @@ void oss_irq_disable(int irq) { #endif switch(irq) { case IRQ_MAC_SCC: - oss->irq_level[OSS_IOPSCC] = OSS_IRQLEV_DISABLED; - break; - case IRQ_MAC_ADB: - oss->irq_level[OSS_IOPISM] = OSS_IRQLEV_DISABLED; - break; - case IRQ_MAC_SCSI: - oss->irq_level[OSS_SCSI] = OSS_IRQLEV_DISABLED; - break; - case IRQ_NUBUS_9: - case IRQ_NUBUS_A: - case IRQ_NUBUS_B: - case IRQ_NUBUS_C: - case IRQ_NUBUS_D: - case IRQ_NUBUS_E: - irq -= NUBUS_SOURCE_BASE; - oss->irq_level[irq] = OSS_IRQLEV_DISABLED; - break; -#ifdef DEBUG_IRQUSE - default: - printk("%s unknown irq %d\n", __func__, irq); - break; -#endif - } -} - -/* - * Clear an OSS interrupt - * - * Not sure if this works or not but it's the only method I could - * think of based on the contents of the mac_oss structure. - */ - -void oss_irq_clear(int irq) { - /* FIXME: how to do this on OSS? */ - switch(irq) { - case IRQ_MAC_SCC: - oss->irq_pending &= ~OSS_IP_IOPSCC; - break; + oss->irq_level[OSS_IOPSCC] = 0; + return; case IRQ_MAC_ADB: - oss->irq_pending &= ~OSS_IP_IOPISM; - break; + oss->irq_level[OSS_IOPISM] = 0; + return; case IRQ_MAC_SCSI: - oss->irq_pending &= ~OSS_IP_SCSI; - break; + oss->irq_level[OSS_SCSI] = 0; + return; case IRQ_NUBUS_9: case IRQ_NUBUS_A: case IRQ_NUBUS_B: @@ -246,36 +219,10 @@ void oss_irq_clear(int irq) { case IRQ_NUBUS_D: case IRQ_NUBUS_E: irq -= NUBUS_SOURCE_BASE; - oss->irq_pending &= ~(1 << irq); - break; + oss->irq_level[irq] = 0; + return; } -} - -/* - * Check to see if a specific OSS interrupt is pending - */ -int oss_irq_pending(int irq) -{ - switch(irq) { - case IRQ_MAC_SCC: - return oss->irq_pending & OSS_IP_IOPSCC; - break; - case IRQ_MAC_ADB: - return oss->irq_pending & OSS_IP_IOPISM; - break; - case IRQ_MAC_SCSI: - return oss->irq_pending & OSS_IP_SCSI; - break; - case IRQ_NUBUS_9: - case IRQ_NUBUS_A: - case IRQ_NUBUS_B: - case IRQ_NUBUS_C: - case IRQ_NUBUS_D: - case IRQ_NUBUS_E: - irq -= NUBUS_SOURCE_BASE; - return oss->irq_pending & (1 << irq); - break; - } - return 0; + if (IRQ_SRC(irq) == 1) + via_irq_disable(irq); } diff --git a/arch/m68k/mac/psc.c b/arch/m68k/mac/psc.c index e6c2d20f328..6f026fc302f 100644 --- a/arch/m68k/mac/psc.c +++ b/arch/m68k/mac/psc.c @@ -180,20 +180,3 @@ void psc_irq_disable(int irq) { #endif psc_write_byte(pIER, 1 << irq_idx); } - -void psc_irq_clear(int irq) { - int irq_src = IRQ_SRC(irq); - int irq_idx = IRQ_IDX(irq); - int pIFR = pIERbase + (irq_src << 4); - - psc_write_byte(pIFR, 1 << irq_idx); -} - -int psc_irq_pending(int irq) -{ - int irq_src = IRQ_SRC(irq); - int irq_idx = IRQ_IDX(irq); - int pIFR = pIERbase + (irq_src << 4); - - return psc_read_byte(pIFR) & (1 << irq_idx); -} diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c index f1600ad2662..2d85662715f 100644 --- a/arch/m68k/mac/via.c +++ b/arch/m68k/mac/via.c @@ -63,24 +63,50 @@ static int gIER,gIFR,gBufA,gBufB; #define MAC_CLOCK_LOW (MAC_CLOCK_TICK&0xFF) #define MAC_CLOCK_HIGH (MAC_CLOCK_TICK>>8) -/* To disable a NuBus slot on Quadras we make that slot IRQ line an output set - * high. On RBV we just use the slot interrupt enable register. On Macs with - * genuine VIA chips we must use nubus_disabled to keep track of disabled slot - * interrupts. When any slot IRQ is disabled we mask the (edge triggered) CA1 - * or "SLOTS" interrupt. When no slot is disabled, we unmask the CA1 interrupt. - * So, on genuine VIAs, having more than one NuBus IRQ can mean trouble, - * because closing one of those drivers can mask all of the NuBus interrupts. - * Also, since we can't mask the unregistered slot IRQs on genuine VIAs, it's - * possible to get interrupts from cards that MacOS or the ROM has configured - * but we have not. FWIW, "Designing Cards and Drivers for Macintosh II and - * Macintosh SE", page 9-8, says, a slot IRQ with no driver would crash MacOS. + +/* + * On Macs with a genuine VIA chip there is no way to mask an individual slot + * interrupt. This limitation also seems to apply to VIA clone logic cores in + * Quadra-like ASICs. (RBV and OSS machines don't have this limitation.) + * + * We used to fake it by configuring the relevent VIA pin as an output + * (to mask the interrupt) or input (to unmask). That scheme did not work on + * (at least) the Quadra 700. A NuBus card's /NMRQ signal is an open-collector + * circuit (see Designing Cards and Drivers for Macintosh II and Macintosh SE, + * p. 10-11 etc) but VIA outputs are not (see datasheet). + * + * Driving these outputs high must cause the VIA to source current and the + * card to sink current when it asserts /NMRQ. Current will flow but the pin + * voltage is uncertain and so the /NMRQ condition may still cause a transition + * at the VIA2 CA1 input (which explains the lost interrupts). A side effect + * is that a disabled slot IRQ can never be tested as pending or not. + * + * Driving these outputs low doesn't work either. All the slot /NMRQ lines are + * (active low) OR'd together to generate the CA1 (aka "SLOTS") interrupt (see + * The Guide To Macintosh Family Hardware, 2nd edition p. 167). If we drive a + * disabled /NMRQ line low, the falling edge immediately triggers a CA1 + * interrupt and all slot interrupts after that will generate no transition + * and therefore no interrupt, even after being re-enabled. + * + * So we make the VIA port A I/O lines inputs and use nubus_disabled to keep + * track of their states. When any slot IRQ becomes disabled we mask the CA1 + * umbrella interrupt. Only when all slot IRQs become enabled do we unmask + * the CA1 interrupt. It must remain enabled even when cards have no interrupt + * handler registered. Drivers must therefore disable a slot interrupt at the + * device before they call free_irq (like shared and autovector interrupts). + * + * There is also a related problem when MacOS is used to boot Linux. A network + * card brought up by a MacOS driver may raise an interrupt while Linux boots. + * This can be fatal since it can't be handled until the right driver loads + * (if such a driver exists at all). Apparently related to this hardware + * limitation, "Designing Cards and Drivers", p. 9-8, says that a slot + * interrupt with no driver would crash MacOS (the book was written before + * the appearance of Macs with RBV or OSS). */ + static u8 nubus_disabled; void via_debug_dump(void); -void via_irq_enable(int irq); -void via_irq_disable(int irq); -void via_irq_clear(int irq); /* * Initialize the VIAs @@ -100,7 +126,7 @@ void __init via_init(void) /* IIci, IIsi, IIvx, IIvi (P6xx), LC series */ - case MAC_VIA_IIci: + case MAC_VIA_IICI: via1 = (void *) VIA1_BASE; if (macintosh_config->ident == MAC_MODEL_IIFX) { via2 = NULL; @@ -197,38 +223,17 @@ void __init via_init(void) if (oss_present) return; - /* Some machines support an alternate IRQ mapping that spreads */ - /* Ethernet and Sound out to their own autolevel IRQs and moves */ - /* VIA1 to level 6. A/UX uses this mapping and we do too. Note */ - /* that the IIfx emulates this alternate mapping using the OSS. */ - - via_alt_mapping = 0; - if (macintosh_config->via_type == MAC_VIA_QUADRA) - switch (macintosh_config->ident) { - case MAC_MODEL_C660: - case MAC_MODEL_Q840: - /* not applicable */ - break; - case MAC_MODEL_P588: - case MAC_MODEL_TV: - case MAC_MODEL_PB140: - case MAC_MODEL_PB145: - case MAC_MODEL_PB160: - case MAC_MODEL_PB165: - case MAC_MODEL_PB165C: - case MAC_MODEL_PB170: - case MAC_MODEL_PB180: - case MAC_MODEL_PB180C: - case MAC_MODEL_PB190: - case MAC_MODEL_PB520: - /* not yet tested */ - break; - default: - via_alt_mapping = 1; - via1[vDirB] |= 0x40; - via1[vBufB] &= ~0x40; - break; - } + if ((macintosh_config->via_type == MAC_VIA_QUADRA) && + (macintosh_config->adb_type != MAC_ADB_PB1) && + (macintosh_config->adb_type != MAC_ADB_PB2) && + (macintosh_config->ident != MAC_MODEL_C660) && + (macintosh_config->ident != MAC_MODEL_Q840)) { + via_alt_mapping = 1; + via1[vDirB] |= 0x40; + via1[vBufB] &= ~0x40; + } else { + via_alt_mapping = 0; + } /* * Now initialize VIA2. For RBV we just kill all interrupts; @@ -248,22 +253,28 @@ void __init via_init(void) via2[vACR] &= ~0x03; /* disable port A & B latches */ } + /* Everything below this point is VIA2 only... */ + + if (rbv_present) + return; + /* - * Set vPCR for control line interrupts (but not on RBV) + * Set vPCR for control line interrupts. + * + * CA1 (SLOTS IRQ), CB1 (ASC IRQ): negative edge trigger. + * + * Macs with ESP SCSI have a negative edge triggered SCSI interrupt. + * Testing reveals that PowerBooks do too. However, the SE/30 + * schematic diagram shows an active high NCR5380 IRQ line. */ - if (!rbv_present) { - /* For all VIA types, CA1 (SLOTS IRQ) and CB1 (ASC IRQ) - * are made negative edge triggered here. - */ - if (macintosh_config->scsi_type == MAC_SCSI_OLD) { - /* CB2 (IRQ) indep. input, positive edge */ - /* CA2 (DRQ) indep. input, positive edge */ - via2[vPCR] = 0x66; - } else { - /* CB2 (IRQ) indep. input, negative edge */ - /* CA2 (DRQ) indep. input, negative edge */ - via2[vPCR] = 0x22; - } + + pr_debug("VIA2 vPCR is 0x%02X\n", via2[vPCR]); + if (macintosh_config->via_type == MAC_VIA_II) { + /* CA2 (SCSI DRQ), CB2 (SCSI IRQ): indep. input, pos. edge */ + via2[vPCR] = 0x66; + } else { + /* CA2 (SCSI DRQ), CB2 (SCSI IRQ): indep. input, neg. edge */ + via2[vPCR] = 0x22; } } @@ -378,34 +389,55 @@ void __init via_nubus_init(void) via2[gBufB] |= 0x02; } - /* Disable all the slot interrupts (where possible). */ + /* + * Disable the slot interrupts. On some hardware that's not possible. + * On some hardware it's unclear what all of these I/O lines do. + */ switch (macintosh_config->via_type) { case MAC_VIA_II: - /* Just make the port A lines inputs. */ - switch(macintosh_config->ident) { - case MAC_MODEL_II: - case MAC_MODEL_IIX: - case MAC_MODEL_IICX: - case MAC_MODEL_SE30: - /* The top two bits are RAM size outputs. */ - via2[vDirA] &= 0xC0; - break; - default: - via2[vDirA] &= 0x80; - } + case MAC_VIA_QUADRA: + pr_debug("VIA2 vDirA is 0x%02X\n", via2[vDirA]); break; - case MAC_VIA_IIci: + case MAC_VIA_IICI: /* RBV. Disable all the slot interrupts. SIER works like IER. */ via2[rSIER] = 0x7F; break; + } +} + +void via_nubus_irq_startup(int irq) +{ + int irq_idx = IRQ_IDX(irq); + + switch (macintosh_config->via_type) { + case MAC_VIA_II: case MAC_VIA_QUADRA: - /* Disable the inactive slot interrupts by making those lines outputs. */ - if ((macintosh_config->adb_type != MAC_ADB_PB1) && - (macintosh_config->adb_type != MAC_ADB_PB2)) { - via2[vBufA] |= 0x7F; - via2[vDirA] |= 0x7F; + /* Make the port A line an input. Probably redundant. */ + if (macintosh_config->via_type == MAC_VIA_II) { + /* The top two bits are RAM size outputs. */ + via2[vDirA] &= 0xC0 | ~(1 << irq_idx); + } else { + /* Allow NuBus slots 9 through F. */ + via2[vDirA] &= 0x80 | ~(1 << irq_idx); } + /* fall through */ + case MAC_VIA_IICI: + via_irq_enable(irq); + break; + } +} + +void via_nubus_irq_shutdown(int irq) +{ + switch (macintosh_config->via_type) { + case MAC_VIA_II: + case MAC_VIA_QUADRA: + /* Ensure that the umbrella CA1 interrupt remains enabled. */ + via_irq_enable(irq); + break; + case MAC_VIA_IICI: + via_irq_disable(irq); break; } } @@ -531,25 +563,18 @@ void via_irq_enable(int irq) { } else if (irq_src == 7) { switch (macintosh_config->via_type) { case MAC_VIA_II: + case MAC_VIA_QUADRA: nubus_disabled &= ~(1 << irq_idx); /* Enable the CA1 interrupt when no slot is disabled. */ if (!nubus_disabled) via2[gIER] = IER_SET_BIT(1); break; - case MAC_VIA_IIci: + case MAC_VIA_IICI: /* On RBV, enable the slot interrupt. * SIER works like IER. */ via2[rSIER] = IER_SET_BIT(irq_idx); break; - case MAC_VIA_QUADRA: - /* Make the port A line an input to enable the slot irq. - * But not on PowerBooks, that's ADB. - */ - if ((macintosh_config->adb_type != MAC_ADB_PB1) && - (macintosh_config->adb_type != MAC_ADB_PB2)) - via2[vDirA] &= ~(1 << irq_idx); - break; } } } @@ -569,60 +594,18 @@ void via_irq_disable(int irq) { } else if (irq_src == 7) { switch (macintosh_config->via_type) { case MAC_VIA_II: + case MAC_VIA_QUADRA: nubus_disabled |= 1 << irq_idx; if (nubus_disabled) via2[gIER] = IER_CLR_BIT(1); break; - case MAC_VIA_IIci: + case MAC_VIA_IICI: via2[rSIER] = IER_CLR_BIT(irq_idx); break; - case MAC_VIA_QUADRA: - if ((macintosh_config->adb_type != MAC_ADB_PB1) && - (macintosh_config->adb_type != MAC_ADB_PB2)) - via2[vDirA] |= 1 << irq_idx; - break; } } } -void via_irq_clear(int irq) { - int irq_src = IRQ_SRC(irq); - int irq_idx = IRQ_IDX(irq); - int irq_bit = 1 << irq_idx; - - if (irq_src == 1) { - via1[vIFR] = irq_bit; - } else if (irq_src == 2) { - via2[gIFR] = irq_bit | rbv_clear; - } else if (irq_src == 7) { - /* FIXME: There is no way to clear an individual nubus slot - * IRQ flag, other than getting the device to do it. - */ - } -} - -/* - * Returns nonzero if an interrupt is pending on the given - * VIA/IRQ combination. - */ - -int via_irq_pending(int irq) -{ - int irq_src = IRQ_SRC(irq); - int irq_idx = IRQ_IDX(irq); - int irq_bit = 1 << irq_idx; - - if (irq_src == 1) { - return via1[vIFR] & irq_bit; - } else if (irq_src == 2) { - return via2[gIFR] & irq_bit; - } else if (irq_src == 7) { - /* Always 0 for MAC_VIA_QUADRA if the slot irq is disabled. */ - return ~via2[gBufA] & irq_bit; - } - return 0; -} - void via1_set_head(int head) { if (head == 0) @@ -631,3 +614,9 @@ void via1_set_head(int head) via1[vBufA] |= VIA1A_vHeadSel; } EXPORT_SYMBOL(via1_set_head); + +int via2_scsi_drq_pending(void) +{ + return via2[gIFR] & (1 << IRQ_IDX(IRQ_MAC_SCSIDRQ)); +} +EXPORT_SYMBOL(via2_scsi_drq_pending); |