diff options
Diffstat (limited to 'arch/m68k/include')
| -rw-r--r-- | arch/m68k/include/asm/m527xsim.h | 52 |
1 files changed, 34 insertions, 18 deletions
diff --git a/arch/m68k/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h index 71aa5104d3d..6335e4298dc 100644 --- a/arch/m68k/include/asm/m527xsim.h +++ b/arch/m68k/include/asm/m527xsim.h @@ -194,9 +194,23 @@ #define MCFGPIO_IRQ_MAX 8 #define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE +/* + * Port Pin Assignment registers. + */ +#define MCFGPIO_PAR_AD (MCF_IPSBAR + 0x100040) +#define MCFGPIO_PAR_BUSCTL (MCF_IPSBAR + 0x100042) +#define MCFGPIO_PAR_BS (MCF_IPSBAR + 0x100044) +#define MCFGPIO_PAR_CS (MCF_IPSBAR + 0x100045) +#define MCFGPIO_PAR_SDRAM (MCF_IPSBAR + 0x100046) +#define MCFGPIO_PAR_FECI2C (MCF_IPSBAR + 0x100047) +#define MCFGPIO_PAR_UART (MCF_IPSBAR + 0x100048) #define MCFGPIO_PAR_QSPI (MCF_IPSBAR + 0x10004A) #define MCFGPIO_PAR_TIMER (MCF_IPSBAR + 0x10004C) -#endif + +#define UART0_ENABLE_MASK 0x000f +#define UART1_ENABLE_MASK 0x0ff0 +#define UART2_ENABLE_MASK 0x3000 +#endif /* CONFIG_M5271 */ #ifdef CONFIG_M5275 #define MCFGPIO_PODR_BUSCTL (MCF_IPSBAR + 0x100004) @@ -289,8 +303,26 @@ #define MCFGPIO_IRQ_MAX 8 #define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE +/* + * Port Pin Assignment registers. + */ +#define MCFGPIO_PAR_AD (MCF_IPSBAR + 0x100070) +#define MCFGPIO_PAR_CS (MCF_IPSBAR + 0x100071) +#define MCFGPIO_PAR_BUSCTL (MCF_IPSBAR + 0x100072) +#define MCFGPIO_PAR_USB (MCF_IPSBAR + 0x100076) +#define MCFGPIO_PAR_FEC0HL (MCF_IPSBAR + 0x100078) +#define MCFGPIO_PAR_FEC1HL (MCF_IPSBAR + 0x100079) +#define MCFGPIO_PAR_TIMER (MCF_IPSBAR + 0x10007A) +#define MCFGPIO_PAR_UART (MCF_IPSBAR + 0x10007C) #define MCFGPIO_PAR_QSPI (MCF_IPSBAR + 0x10007E) -#endif +#define MCFGPIO_PAR_SDRAM (MCF_IPSBAR + 0x100080) +#define MCFGPIO_PAR_FECI2C (MCF_IPSBAR + 0x100082) +#define MCFGPIO_PAR_BS (MCF_IPSBAR + 0x100084) + +#define UART0_ENABLE_MASK 0x000f +#define UART1_ENABLE_MASK 0x00f0 +#define UART2_ENABLE_MASK 0x3f00 +#endif /* CONFIG_M5275 */ /* * PIT timer base addresses. @@ -311,22 +343,6 @@ #define MCFEPORT_EPFR (MCF_IPSBAR + 0x130006) /* - * GPIO pins setups to enable the UARTs. - */ -#ifdef CONFIG_M5271 -#define MCF_GPIO_PAR_UART 0x100048 /* PAR UART address */ -#define UART0_ENABLE_MASK 0x000f -#define UART1_ENABLE_MASK 0x0ff0 -#define UART2_ENABLE_MASK 0x3000 -#endif -#ifdef CONFIG_M5275 -#define MCF_GPIO_PAR_UART 0x10007c /* PAR UART address */ -#define UART0_ENABLE_MASK 0x000f -#define UART1_ENABLE_MASK 0x00f0 -#define UART2_ENABLE_MASK 0x3f00 -#endif - -/* * Reset Control Unit (relative to IPSBAR). */ #define MCF_RCR (MCF_IPSBAR + 0x110000) |