aboutsummaryrefslogtreecommitdiff
path: root/arch/m68k/include
diff options
context:
space:
mode:
Diffstat (limited to 'arch/m68k/include')
-rw-r--r--arch/m68k/include/asm/checksum.h173
-rw-r--r--arch/m68k/include/asm/checksum_mm.h148
-rw-r--r--arch/m68k/include/asm/checksum_no.h132
-rw-r--r--arch/m68k/include/asm/dma.h492
-rw-r--r--arch/m68k/include/asm/dma_mm.h16
-rw-r--r--arch/m68k/include/asm/dma_no.h494
-rw-r--r--arch/m68k/include/asm/elia.h41
-rw-r--r--arch/m68k/include/asm/gpio.h238
-rw-r--r--arch/m68k/include/asm/hardirq_mm.h12
-rw-r--r--arch/m68k/include/asm/hardirq_no.h10
-rw-r--r--arch/m68k/include/asm/io_no.h2
-rw-r--r--arch/m68k/include/asm/irq.h135
-rw-r--r--arch/m68k/include/asm/irq_mm.h126
-rw-r--r--arch/m68k/include/asm/irq_no.h26
-rw-r--r--arch/m68k/include/asm/m5206sim.h33
-rw-r--r--arch/m68k/include/asm/m520xsim.h77
-rw-r--r--arch/m68k/include/asm/m523xsim.h77
-rw-r--r--arch/m68k/include/asm/m5249sim.h54
-rw-r--r--arch/m68k/include/asm/m5272sim.h62
-rw-r--r--arch/m68k/include/asm/m527xsim.h169
-rw-r--r--arch/m68k/include/asm/m528xsim.h151
-rw-r--r--arch/m68k/include/asm/m5307sim.h32
-rw-r--r--arch/m68k/include/asm/m532xsim.h198
-rw-r--r--arch/m68k/include/asm/m5407sim.h28
-rw-r--r--arch/m68k/include/asm/mcfgpio.h40
-rw-r--r--arch/m68k/include/asm/mcfintc.h89
-rw-r--r--arch/m68k/include/asm/mcfne.h83
-rw-r--r--arch/m68k/include/asm/mcfsim.h95
-rw-r--r--arch/m68k/include/asm/mcfsmc.h6
-rw-r--r--arch/m68k/include/asm/mman.h18
-rw-r--r--arch/m68k/include/asm/nettel.h4
-rw-r--r--arch/m68k/include/asm/page_no.h4
-rw-r--r--arch/m68k/include/asm/pinmux.h30
-rw-r--r--arch/m68k/include/asm/processor.h171
-rw-r--r--arch/m68k/include/asm/processor_mm.h130
-rw-r--r--arch/m68k/include/asm/processor_no.h143
-rw-r--r--arch/m68k/include/asm/timex.h17
-rw-r--r--arch/m68k/include/asm/unistd.h2
38 files changed, 2081 insertions, 1677 deletions
diff --git a/arch/m68k/include/asm/checksum.h b/arch/m68k/include/asm/checksum.h
index 1cf54476745..ec514485c8b 100644
--- a/arch/m68k/include/asm/checksum.h
+++ b/arch/m68k/include/asm/checksum.h
@@ -1,5 +1,170 @@
-#ifdef __uClinux__
-#include "checksum_no.h"
+#ifndef _M68K_CHECKSUM_H
+#define _M68K_CHECKSUM_H
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+extern __wsum csum_partial_copy_from_user(const void __user *src,
+ void *dst,
+ int len, __wsum sum,
+ int *csum_err);
+
+extern __wsum csum_partial_copy_nocheck(const void *src,
+ void *dst, int len,
+ __wsum sum);
+
+
+#ifdef CONFIG_COLDFIRE
+
+/*
+ * The ColdFire cores don't support all the 68k instructions used
+ * in the optimized checksum code below. So it reverts back to using
+ * more standard C coded checksums. The fast checksum code is
+ * significantly larger than the optimized version, so it is not
+ * inlined here.
+ */
+__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+ unsigned int tmp = (__force u32)sum;
+
+ tmp = (tmp & 0xffff) + (tmp >> 16);
+ tmp = (tmp & 0xffff) + (tmp >> 16);
+
+ return (__force __sum16)~tmp;
+}
+
#else
-#include "checksum_mm.h"
-#endif
+
+/*
+ * This is a version of ip_fast_csum() optimized for IP headers,
+ * which always checksum on 4 octet boundaries.
+ */
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+ unsigned int sum = 0;
+ unsigned long tmp;
+
+ __asm__ ("subqw #1,%2\n"
+ "1:\t"
+ "movel %1@+,%3\n\t"
+ "addxl %3,%0\n\t"
+ "dbra %2,1b\n\t"
+ "movel %0,%3\n\t"
+ "swap %3\n\t"
+ "addxw %3,%0\n\t"
+ "clrw %3\n\t"
+ "addxw %3,%0\n\t"
+ : "=d" (sum), "=&a" (iph), "=&d" (ihl), "=&d" (tmp)
+ : "0" (sum), "1" (iph), "2" (ihl)
+ : "memory");
+ return (__force __sum16)~sum;
+}
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+ unsigned int tmp = (__force u32)sum;
+
+ __asm__("swap %1\n\t"
+ "addw %1, %0\n\t"
+ "clrw %1\n\t"
+ "addxw %1, %0"
+ : "=&d" (sum), "=&d" (tmp)
+ : "0" (sum), "1" (tmp));
+
+ return (__force __sum16)~sum;
+}
+
+#endif /* CONFIG_COLDFIRE */
+
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+ unsigned short proto, __wsum sum)
+{
+ __asm__ ("addl %2,%0\n\t"
+ "addxl %3,%0\n\t"
+ "addxl %4,%0\n\t"
+ "clrl %1\n\t"
+ "addxl %1,%0"
+ : "=&d" (sum), "=d" (saddr)
+ : "g" (daddr), "1" (saddr), "d" (len + proto),
+ "0" (sum));
+ return sum;
+}
+
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
+ unsigned short proto, __wsum sum)
+{
+ return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+ return csum_fold (csum_partial(buff, len, 0));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+static __inline__ __sum16
+csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
+ __u32 len, unsigned short proto, __wsum sum)
+{
+ register unsigned long tmp;
+ __asm__("addl %2@,%0\n\t"
+ "movel %2@(4),%1\n\t"
+ "addxl %1,%0\n\t"
+ "movel %2@(8),%1\n\t"
+ "addxl %1,%0\n\t"
+ "movel %2@(12),%1\n\t"
+ "addxl %1,%0\n\t"
+ "movel %3@,%1\n\t"
+ "addxl %1,%0\n\t"
+ "movel %3@(4),%1\n\t"
+ "addxl %1,%0\n\t"
+ "movel %3@(8),%1\n\t"
+ "addxl %1,%0\n\t"
+ "movel %3@(12),%1\n\t"
+ "addxl %1,%0\n\t"
+ "addxl %4,%0\n\t"
+ "clrl %1\n\t"
+ "addxl %1,%0"
+ : "=&d" (sum), "=&d" (tmp)
+ : "a" (saddr), "a" (daddr), "d" (len + proto),
+ "0" (sum));
+
+ return csum_fold(sum);
+}
+
+#endif /* _M68K_CHECKSUM_H */
diff --git a/arch/m68k/include/asm/checksum_mm.h b/arch/m68k/include/asm/checksum_mm.h
deleted file mode 100644
index 494f9aec37e..00000000000
--- a/arch/m68k/include/asm/checksum_mm.h
+++ /dev/null
@@ -1,148 +0,0 @@
-#ifndef _M68K_CHECKSUM_H
-#define _M68K_CHECKSUM_H
-
-#include <linux/in6.h>
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-extern __wsum csum_partial_copy_from_user(const void __user *src,
- void *dst,
- int len, __wsum sum,
- int *csum_err);
-
-extern __wsum csum_partial_copy_nocheck(const void *src,
- void *dst, int len,
- __wsum sum);
-
-/*
- * This is a version of ip_compute_csum() optimized for IP headers,
- * which always checksum on 4 octet boundaries.
- *
- */
-static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
- unsigned int sum = 0;
- unsigned long tmp;
-
- __asm__ ("subqw #1,%2\n"
- "1:\t"
- "movel %1@+,%3\n\t"
- "addxl %3,%0\n\t"
- "dbra %2,1b\n\t"
- "movel %0,%3\n\t"
- "swap %3\n\t"
- "addxw %3,%0\n\t"
- "clrw %3\n\t"
- "addxw %3,%0\n\t"
- : "=d" (sum), "=&a" (iph), "=&d" (ihl), "=&d" (tmp)
- : "0" (sum), "1" (iph), "2" (ihl)
- : "memory");
- return (__force __sum16)~sum;
-}
-
-/*
- * Fold a partial checksum
- */
-
-static inline __sum16 csum_fold(__wsum sum)
-{
- unsigned int tmp = (__force u32)sum;
- __asm__("swap %1\n\t"
- "addw %1, %0\n\t"
- "clrw %1\n\t"
- "addxw %1, %0"
- : "=&d" (sum), "=&d" (tmp)
- : "0" (sum), "1" (tmp));
- return (__force __sum16)~sum;
-}
-
-
-static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
- unsigned short proto, __wsum sum)
-{
- __asm__ ("addl %2,%0\n\t"
- "addxl %3,%0\n\t"
- "addxl %4,%0\n\t"
- "clrl %1\n\t"
- "addxl %1,%0"
- : "=&d" (sum), "=d" (saddr)
- : "g" (daddr), "1" (saddr), "d" (len + proto),
- "0" (sum));
- return sum;
-}
-
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
- unsigned short proto, __wsum sum)
-{
- return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-
-static inline __sum16 ip_compute_csum(const void *buff, int len)
-{
- return csum_fold (csum_partial(buff, len, 0));
-}
-
-#define _HAVE_ARCH_IPV6_CSUM
-static __inline__ __sum16
-csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
- __u32 len, unsigned short proto, __wsum sum)
-{
- register unsigned long tmp;
- __asm__("addl %2@,%0\n\t"
- "movel %2@(4),%1\n\t"
- "addxl %1,%0\n\t"
- "movel %2@(8),%1\n\t"
- "addxl %1,%0\n\t"
- "movel %2@(12),%1\n\t"
- "addxl %1,%0\n\t"
- "movel %3@,%1\n\t"
- "addxl %1,%0\n\t"
- "movel %3@(4),%1\n\t"
- "addxl %1,%0\n\t"
- "movel %3@(8),%1\n\t"
- "addxl %1,%0\n\t"
- "movel %3@(12),%1\n\t"
- "addxl %1,%0\n\t"
- "addxl %4,%0\n\t"
- "clrl %1\n\t"
- "addxl %1,%0"
- : "=&d" (sum), "=&d" (tmp)
- : "a" (saddr), "a" (daddr), "d" (len + proto),
- "0" (sum));
-
- return csum_fold(sum);
-}
-
-#endif /* _M68K_CHECKSUM_H */
diff --git a/arch/m68k/include/asm/checksum_no.h b/arch/m68k/include/asm/checksum_no.h
deleted file mode 100644
index 81883482ffb..00000000000
--- a/arch/m68k/include/asm/checksum_no.h
+++ /dev/null
@@ -1,132 +0,0 @@
-#ifndef _M68K_CHECKSUM_H
-#define _M68K_CHECKSUM_H
-
-#include <linux/in6.h>
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-__wsum csum_partial_copy_nocheck(const void *src, void *dst,
- int len, __wsum sum);
-
-
-/*
- * the same as csum_partial_copy, but copies from user space.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-extern __wsum csum_partial_copy_from_user(const void __user *src,
- void *dst, int len, __wsum sum, int *csum_err);
-
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-
-/*
- * Fold a partial checksum
- */
-
-static inline __sum16 csum_fold(__wsum sum)
-{
- unsigned int tmp = (__force u32)sum;
-#ifdef CONFIG_COLDFIRE
- tmp = (tmp & 0xffff) + (tmp >> 16);
- tmp = (tmp & 0xffff) + (tmp >> 16);
- return (__force __sum16)~tmp;
-#else
- __asm__("swap %1\n\t"
- "addw %1, %0\n\t"
- "clrw %1\n\t"
- "addxw %1, %0"
- : "=&d" (sum), "=&d" (tmp)
- : "0" (sum), "1" (sum));
- return (__force __sum16)~sum;
-#endif
-}
-
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-
-static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
- unsigned short proto, __wsum sum)
-{
- __asm__ ("addl %1,%0\n\t"
- "addxl %4,%0\n\t"
- "addxl %5,%0\n\t"
- "clrl %1\n\t"
- "addxl %1,%0"
- : "=&d" (sum), "=&d" (saddr)
- : "0" (daddr), "1" (saddr), "d" (len + proto),
- "d"(sum));
- return sum;
-}
-
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
- unsigned short proto, __wsum sum)
-{
- return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-
-extern __sum16 ip_compute_csum(const void *buff, int len);
-
-#define _HAVE_ARCH_IPV6_CSUM
-static __inline__ __sum16
-csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
- __u32 len, unsigned short proto, __wsum sum)
-{
- register unsigned long tmp;
- __asm__("addl %2@,%0\n\t"
- "movel %2@(4),%1\n\t"
- "addxl %1,%0\n\t"
- "movel %2@(8),%1\n\t"
- "addxl %1,%0\n\t"
- "movel %2@(12),%1\n\t"
- "addxl %1,%0\n\t"
- "movel %3@,%1\n\t"
- "addxl %1,%0\n\t"
- "movel %3@(4),%1\n\t"
- "addxl %1,%0\n\t"
- "movel %3@(8),%1\n\t"
- "addxl %1,%0\n\t"
- "movel %3@(12),%1\n\t"
- "addxl %1,%0\n\t"
- "addxl %4,%0\n\t"
- "clrl %1\n\t"
- "addxl %1,%0"
- : "=&d" (sum), "=&d" (tmp)
- : "a" (saddr), "a" (daddr), "d" (len + proto),
- "0" (sum));
-
- return csum_fold(sum);
-}
-
-#endif /* _M68K_CHECKSUM_H */
diff --git a/arch/m68k/include/asm/dma.h b/arch/m68k/include/asm/dma.h
index b82e660cf1c..6fbdfe89510 100644
--- a/arch/m68k/include/asm/dma.h
+++ b/arch/m68k/include/asm/dma.h
@@ -1,5 +1,491 @@
-#ifdef __uClinux__
-#include "dma_no.h"
+#ifndef _M68K_DMA_H
+#define _M68K_DMA_H 1
+
+#ifdef CONFIG_COLDFIRE
+/*
+ * ColdFire DMA Model:
+ * ColdFire DMA supports two forms of DMA: Single and Dual address. Single
+ * address mode emits a source address, and expects that the device will either
+ * pick up the data (DMA READ) or source data (DMA WRITE). This implies that
+ * the device will place data on the correct byte(s) of the data bus, as the
+ * memory transactions are always 32 bits. This implies that only 32 bit
+ * devices will find single mode transfers useful. Dual address DMA mode
+ * performs two cycles: source read and destination write. ColdFire will
+ * align the data so that the device will always get the correct bytes, thus
+ * is useful for 8 and 16 bit devices. This is the mode that is supported
+ * below.
+ *
+ * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000
+ * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
+ *
+ * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000
+ * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
+ *
+ * APR/18/2002 : added proper support for MCF5272 DMA controller.
+ * Arthur Shipkowski (art@videon-central.com)
+ */
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfdma.h>
+
+/*
+ * Set number of channels of DMA on ColdFire for different implementations.
+ */
+#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \
+ defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
+#define MAX_M68K_DMA_CHANNELS 4
+#elif defined(CONFIG_M5272)
+#define MAX_M68K_DMA_CHANNELS 1
+#elif defined(CONFIG_M532x)
+#define MAX_M68K_DMA_CHANNELS 0
#else
-#include "dma_mm.h"
+#define MAX_M68K_DMA_CHANNELS 2
#endif
+
+extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS];
+extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
+
+#if !defined(CONFIG_M5272)
+#define DMA_MODE_WRITE_BIT 0x01 /* Memory/IO to IO/Memory select */
+#define DMA_MODE_WORD_BIT 0x02 /* 8 or 16 bit transfers */
+#define DMA_MODE_LONG_BIT 0x04 /* or 32 bit transfers */
+#define DMA_MODE_SINGLE_BIT 0x08 /* single-address-mode */
+
+/* I/O to memory, 8 bits, mode */
+#define DMA_MODE_READ 0
+/* memory to I/O, 8 bits, mode */
+#define DMA_MODE_WRITE 1
+/* I/O to memory, 16 bits, mode */
+#define DMA_MODE_READ_WORD 2
+/* memory to I/O, 16 bits, mode */
+#define DMA_MODE_WRITE_WORD 3
+/* I/O to memory, 32 bits, mode */
+#define DMA_MODE_READ_LONG 4
+/* memory to I/O, 32 bits, mode */
+#define DMA_MODE_WRITE_LONG 5
+/* I/O to memory, 8 bits, single-address-mode */
+#define DMA_MODE_READ_SINGLE 8
+/* memory to I/O, 8 bits, single-address-mode */
+#define DMA_MODE_WRITE_SINGLE 9
+/* I/O to memory, 16 bits, single-address-mode */
+#define DMA_MODE_READ_WORD_SINGLE 10
+/* memory to I/O, 16 bits, single-address-mode */
+#define DMA_MODE_WRITE_WORD_SINGLE 11
+/* I/O to memory, 32 bits, single-address-mode */
+#define DMA_MODE_READ_LONG_SINGLE 12
+/* memory to I/O, 32 bits, single-address-mode */
+#define DMA_MODE_WRITE_LONG_SINGLE 13
+
+#else /* CONFIG_M5272 is defined */
+
+/* Source static-address mode */
+#define DMA_MODE_SRC_SA_BIT 0x01
+/* Two bits to select between all four modes */
+#define DMA_MODE_SSIZE_MASK 0x06
+/* Offset to shift bits in */
+#define DMA_MODE_SSIZE_OFF 0x01
+/* Destination static-address mode */
+#define DMA_MODE_DES_SA_BIT 0x10
+/* Two bits to select between all four modes */
+#define DMA_MODE_DSIZE_MASK 0x60
+/* Offset to shift bits in */
+#define DMA_MODE_DSIZE_OFF 0x05
+/* Size modifiers */
+#define DMA_MODE_SIZE_LONG 0x00
+#define DMA_MODE_SIZE_BYTE 0x01
+#define DMA_MODE_SIZE_WORD 0x02
+#define DMA_MODE_SIZE_LINE 0x03
+
+/*
+ * Aliases to help speed quick ports; these may be suboptimal, however. They
+ * do not include the SINGLE mode modifiers since the MCF5272 does not have a
+ * mode where the device is in control of its addressing.
+ */
+
+/* I/O to memory, 8 bits, mode */
+#define DMA_MODE_READ ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
+/* memory to I/O, 8 bits, mode */
+#define DMA_MODE_WRITE ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
+/* I/O to memory, 16 bits, mode */
+#define DMA_MODE_READ_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
+/* memory to I/O, 16 bits, mode */
+#define DMA_MODE_WRITE_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
+/* I/O to memory, 32 bits, mode */
+#define DMA_MODE_READ_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
+/* memory to I/O, 32 bits, mode */
+#define DMA_MODE_WRITE_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
+
+#endif /* !defined(CONFIG_M5272) */
+
+#if !defined(CONFIG_M5272)
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+ volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+ printk("enable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+ dmawp = (unsigned short *) dma_base_addr[dmanr];
+ dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT;
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+ volatile unsigned short *dmawp;
+ volatile unsigned char *dmapb;
+
+#ifdef DMA_DEBUG
+ printk("disable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+ dmawp = (unsigned short *) dma_base_addr[dmanr];
+ dmapb = (unsigned char *) dma_base_addr[dmanr];
+
+ /* Turn off external requests, and stop any DMA in progress */
+ dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT;
+ dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE;
+}
+
+/*
+ * Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while interrupts are disabled! ---
+ *
+ * This is a NOP for ColdFire. Provide a stub for compatibility.
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+
+ volatile unsigned char *dmabp;
+ volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+ printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
+#endif
+
+ dmabp = (unsigned char *) dma_base_addr[dmanr];
+ dmawp = (unsigned short *) dma_base_addr[dmanr];
+
+ /* Clear config errors */
+ dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE;
+
+ /* Set command register */
+ dmawp[MCFDMA_DCR] =
+ MCFDMA_DCR_INT | /* Enable completion irq */
+ MCFDMA_DCR_CS | /* Force one xfer per request */
+ MCFDMA_DCR_AA | /* Enable auto alignment */
+ /* single-address-mode */
+ ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) |
+ /* sets s_rw (-> r/w) high if Memory to I/0 */
+ ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) |
+ /* Memory to I/O or I/O to Memory */
+ ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) |
+ /* 32 bit, 16 bit or 8 bit transfers */
+ ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_SSIZE_WORD :
+ ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG :
+ MCFDMA_DCR_SSIZE_BYTE)) |
+ ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_DSIZE_WORD :
+ ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG :
+ MCFDMA_DCR_DSIZE_BYTE));
+
+#ifdef DEBUG_DMA
+ printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__,
+ dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR],
+ (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]);
+#endif
+}
+
+/* Set transfer address for specific DMA channel */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+ volatile unsigned short *dmawp;
+ volatile unsigned int *dmalp;
+
+#ifdef DMA_DEBUG
+ printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+ dmawp = (unsigned short *) dma_base_addr[dmanr];
+ dmalp = (unsigned int *) dma_base_addr[dmanr];
+
+ /* Determine which address registers are used for memory/device accesses */
+ if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) {
+ /* Source incrementing, must be memory */
+ dmalp[MCFDMA_SAR] = a;
+ /* Set dest address, must be device */
+ dmalp[MCFDMA_DAR] = dma_device_address[dmanr];
+ } else {
+ /* Destination incrementing, must be memory */
+ dmalp[MCFDMA_DAR] = a;
+ /* Set source address, must be device */
+ dmalp[MCFDMA_SAR] = dma_device_address[dmanr];
+ }
+
+#ifdef DEBUG_DMA
+ printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
+ __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR],
+ (int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR],
+ (int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]);
+#endif
+}
+
+/*
+ * Specific for Coldfire - sets device address.
+ * Should be called after the mode set call, and before set DMA address.
+ */
+static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
+{
+#ifdef DMA_DEBUG
+ printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+ dma_device_address[dmanr] = a;
+}
+
+/*
+ * NOTE 2: "count" represents _bytes_.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+ volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+ printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
+#endif
+
+ dmawp = (unsigned short *) dma_base_addr[dmanr];
+ dmawp[MCFDMA_BCR] = (unsigned short)count;
+}
+
+/*
+ * Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+ volatile unsigned short *dmawp;
+ unsigned short count;
+
+#ifdef DMA_DEBUG
+ printk("get_dma_residue(dmanr=%d)\n", dmanr);
+#endif
+
+ dmawp = (unsigned short *) dma_base_addr[dmanr];
+ count = dmawp[MCFDMA_BCR];
+ return((int) count);
+}
+#else /* CONFIG_M5272 is defined */
+
+/*
+ * The MCF5272 DMA controller is very different than the controller defined above
+ * in terms of register mapping. For instance, with the exception of the 16-bit
+ * interrupt register (IRQ#85, for reference), all of the registers are 32-bit.
+ *
+ * The big difference, however, is the lack of device-requested DMA. All modes
+ * are dual address transfer, and there is no 'device' setup or direction bit.
+ * You can DMA between a device and memory, between memory and memory, or even between
+ * two devices directly, with any combination of incrementing and non-incrementing
+ * addresses you choose. This puts a crimp in distinguishing between the 'device
+ * address' set up by set_dma_device_addr.
+ *
+ * Therefore, there are two options. One is to use set_dma_addr and set_dma_device_addr,
+ * which will act exactly as above in -- it will look to see if the source is set to
+ * autoincrement, and if so it will make the source use the set_dma_addr value and the
+ * destination the set_dma_device_addr value. Otherwise the source will be set to the
+ * set_dma_device_addr value and the destination will get the set_dma_addr value.
+ *
+ * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions
+ * and make it explicit. Depending on what you're doing, one of these two should work
+ * for you, but don't mix them in the same transfer setup.
+ */
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+ volatile unsigned int *dmalp;
+
+#ifdef DMA_DEBUG
+ printk("enable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+ dmalp = (unsigned int *) dma_base_addr[dmanr];
+ dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN;
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+ volatile unsigned int *dmalp;
+
+#ifdef DMA_DEBUG
+ printk("disable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+ dmalp = (unsigned int *) dma_base_addr[dmanr];
+
+ /* Turn off external requests, and stop any DMA in progress */
+ dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN;
+ dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
+}
+
+/*
+ * Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while interrupts are disabled! ---
+ *
+ * This is a NOP for ColdFire. Provide a stub for compatibility.
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+
+ volatile unsigned int *dmalp;
+ volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+ printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
+#endif
+ dmalp = (unsigned int *) dma_base_addr[dmanr];
+ dmawp = (unsigned short *) dma_base_addr[dmanr];
+
+ /* Clear config errors */
+ dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
+
+ /* Set command register */
+ dmalp[MCFDMA_DMR] =
+ MCFDMA_DMR_RQM_DUAL | /* Mandatory Request Mode setting */
+ MCFDMA_DMR_DSTT_SD | /* Set up addressing types; set to supervisor-data. */
+ MCFDMA_DMR_SRCT_SD | /* Set up addressing types; set to supervisor-data. */
+ /* source static-address-mode */
+ ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) |
+ /* dest static-address-mode */
+ ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) |
+ /* burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272 */
+ (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) |
+ (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF);
+
+ dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN; /* Enable completion interrupts */
+
+#ifdef DEBUG_DMA
+ printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__,
+ dmanr, (int) &dmalp[MCFDMA_DMR], dmabp[MCFDMA_DMR],
+ (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]);
+#endif
+}
+
+/* Set transfer address for specific DMA channel */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+ volatile unsigned int *dmalp;
+
+#ifdef DMA_DEBUG
+ printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+ dmalp = (unsigned int *) dma_base_addr[dmanr];
+
+ /* Determine which address registers are used for memory/device accesses */
+ if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) {
+ /* Source incrementing, must be memory */
+ dmalp[MCFDMA_DSAR] = a;
+ /* Set dest address, must be device */
+ dmalp[MCFDMA_DDAR] = dma_device_address[dmanr];
+ } else {
+ /* Destination incrementing, must be memory */
+ dmalp[MCFDMA_DDAR] = a;
+ /* Set source address, must be device */
+ dmalp[MCFDMA_DSAR] = dma_device_address[dmanr];
+ }
+
+#ifdef DEBUG_DMA
+ printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
+ __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DMR], dmawp[MCFDMA_DMR],
+ (int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR],
+ (int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]);
+#endif
+}
+
+/*
+ * Specific for Coldfire - sets device address.
+ * Should be called after the mode set call, and before set DMA address.
+ */
+static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
+{
+#ifdef DMA_DEBUG
+ printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+ dma_device_address[dmanr] = a;
+}
+
+/*
+ * NOTE 2: "count" represents _bytes_.
+ *
+ * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+ volatile unsigned int *dmalp;
+
+#ifdef DMA_DEBUG
+ printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
+#endif
+
+ dmalp = (unsigned int *) dma_base_addr[dmanr];
+ dmalp[MCFDMA_DBCR] = count;
+}
+
+/*
+ * Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+ volatile unsigned int *dmalp;
+ unsigned int count;
+
+#ifdef DMA_DEBUG
+ printk("get_dma_residue(dmanr=%d)\n", dmanr);
+#endif
+
+ dmalp = (unsigned int *) dma_base_addr[dmanr];
+ count = dmalp[MCFDMA_DBCR];
+ return(count);
+}
+
+#endif /* !defined(CONFIG_M5272) */
+#endif /* CONFIG_COLDFIRE */
+
+/* it's useless on the m68k, but unfortunately needed by the new
+ bootmem allocator (but this should do it for this) */
+#define MAX_DMA_ADDRESS PAGE_OFFSET
+
+#define MAX_DMA_CHANNELS 8
+
+extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */
+extern void free_dma(unsigned int dmanr); /* release it again */
+
+#define isa_dma_bridge_buggy (0)
+
+#endif /* _M68K_DMA_H */
diff --git a/arch/m68k/include/asm/dma_mm.h b/arch/m68k/include/asm/dma_mm.h
deleted file mode 100644
index 4240fbc946f..00000000000
--- a/arch/m68k/include/asm/dma_mm.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _M68K_DMA_H
-#define _M68K_DMA_H 1
-
-
-/* it's useless on the m68k, but unfortunately needed by the new
- bootmem allocator (but this should do it for this) */
-#define MAX_DMA_ADDRESS PAGE_OFFSET
-
-#define MAX_DMA_CHANNELS 8
-
-extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */
-extern void free_dma(unsigned int dmanr); /* release it again */
-
-#define isa_dma_bridge_buggy (0)
-
-#endif /* _M68K_DMA_H */
diff --git a/arch/m68k/include/asm/dma_no.h b/arch/m68k/include/asm/dma_no.h
deleted file mode 100644
index 939a0205621..00000000000
--- a/arch/m68k/include/asm/dma_no.h
+++ /dev/null
@@ -1,494 +0,0 @@
-#ifndef _M68K_DMA_H
-#define _M68K_DMA_H 1
-
-//#define DMA_DEBUG 1
-
-
-#ifdef CONFIG_COLDFIRE
-/*
- * ColdFire DMA Model:
- * ColdFire DMA supports two forms of DMA: Single and Dual address. Single
- * address mode emits a source address, and expects that the device will either
- * pick up the data (DMA READ) or source data (DMA WRITE). This implies that
- * the device will place data on the correct byte(s) of the data bus, as the
- * memory transactions are always 32 bits. This implies that only 32 bit
- * devices will find single mode transfers useful. Dual address DMA mode
- * performs two cycles: source read and destination write. ColdFire will
- * align the data so that the device will always get the correct bytes, thus
- * is useful for 8 and 16 bit devices. This is the mode that is supported
- * below.
- *
- * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000
- * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
- *
- * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000
- * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
- *
- * APR/18/2002 : added proper support for MCF5272 DMA controller.
- * Arthur Shipkowski (art@videon-central.com)
- */
-
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfdma.h>
-
-/*
- * Set number of channels of DMA on ColdFire for different implementations.
- */
-#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \
- defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
-#define MAX_M68K_DMA_CHANNELS 4
-#elif defined(CONFIG_M5272)
-#define MAX_M68K_DMA_CHANNELS 1
-#elif defined(CONFIG_M532x)
-#define MAX_M68K_DMA_CHANNELS 0
-#else
-#define MAX_M68K_DMA_CHANNELS 2
-#endif
-
-extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS];
-extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
-
-#if !defined(CONFIG_M5272)
-#define DMA_MODE_WRITE_BIT 0x01 /* Memory/IO to IO/Memory select */
-#define DMA_MODE_WORD_BIT 0x02 /* 8 or 16 bit transfers */
-#define DMA_MODE_LONG_BIT 0x04 /* or 32 bit transfers */
-#define DMA_MODE_SINGLE_BIT 0x08 /* single-address-mode */
-
-/* I/O to memory, 8 bits, mode */
-#define DMA_MODE_READ 0
-/* memory to I/O, 8 bits, mode */
-#define DMA_MODE_WRITE 1
-/* I/O to memory, 16 bits, mode */
-#define DMA_MODE_READ_WORD 2
-/* memory to I/O, 16 bits, mode */
-#define DMA_MODE_WRITE_WORD 3
-/* I/O to memory, 32 bits, mode */
-#define DMA_MODE_READ_LONG 4
-/* memory to I/O, 32 bits, mode */
-#define DMA_MODE_WRITE_LONG 5
-/* I/O to memory, 8 bits, single-address-mode */
-#define DMA_MODE_READ_SINGLE 8
-/* memory to I/O, 8 bits, single-address-mode */
-#define DMA_MODE_WRITE_SINGLE 9
-/* I/O to memory, 16 bits, single-address-mode */
-#define DMA_MODE_READ_WORD_SINGLE 10
-/* memory to I/O, 16 bits, single-address-mode */
-#define DMA_MODE_WRITE_WORD_SINGLE 11
-/* I/O to memory, 32 bits, single-address-mode */
-#define DMA_MODE_READ_LONG_SINGLE 12
-/* memory to I/O, 32 bits, single-address-mode */
-#define DMA_MODE_WRITE_LONG_SINGLE 13
-
-#else /* CONFIG_M5272 is defined */
-
-/* Source static-address mode */
-#define DMA_MODE_SRC_SA_BIT 0x01
-/* Two bits to select between all four modes */
-#define DMA_MODE_SSIZE_MASK 0x06
-/* Offset to shift bits in */
-#define DMA_MODE_SSIZE_OFF 0x01
-/* Destination static-address mode */
-#define DMA_MODE_DES_SA_BIT 0x10
-/* Two bits to select between all four modes */
-#define DMA_MODE_DSIZE_MASK 0x60
-/* Offset to shift bits in */
-#define DMA_MODE_DSIZE_OFF 0x05
-/* Size modifiers */
-#define DMA_MODE_SIZE_LONG 0x00
-#define DMA_MODE_SIZE_BYTE 0x01
-#define DMA_MODE_SIZE_WORD 0x02
-#define DMA_MODE_SIZE_LINE 0x03
-
-/*
- * Aliases to help speed quick ports; these may be suboptimal, however. They
- * do not include the SINGLE mode modifiers since the MCF5272 does not have a
- * mode where the device is in control of its addressing.
- */
-
-/* I/O to memory, 8 bits, mode */
-#define DMA_MODE_READ ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
-/* memory to I/O, 8 bits, mode */
-#define DMA_MODE_WRITE ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
-/* I/O to memory, 16 bits, mode */
-#define DMA_MODE_READ_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
-/* memory to I/O, 16 bits, mode */
-#define DMA_MODE_WRITE_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
-/* I/O to memory, 32 bits, mode */
-#define DMA_MODE_READ_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
-/* memory to I/O, 32 bits, mode */
-#define DMA_MODE_WRITE_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
-
-#endif /* !defined(CONFIG_M5272) */
-
-#if !defined(CONFIG_M5272)
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
- volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
- printk("enable_dma(dmanr=%d)\n", dmanr);
-#endif
-
- dmawp = (unsigned short *) dma_base_addr[dmanr];
- dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT;
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
- volatile unsigned short *dmawp;
- volatile unsigned char *dmapb;
-
-#ifdef DMA_DEBUG
- printk("disable_dma(dmanr=%d)\n", dmanr);
-#endif
-
- dmawp = (unsigned short *) dma_base_addr[dmanr];
- dmapb = (unsigned char *) dma_base_addr[dmanr];
-
- /* Turn off external requests, and stop any DMA in progress */
- dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT;
- dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE;
-}
-
-/*
- * Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while interrupts are disabled! ---
- *
- * This is a NOP for ColdFire. Provide a stub for compatibility.
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
-
- volatile unsigned char *dmabp;
- volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
- printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
-#endif
-
- dmabp = (unsigned char *) dma_base_addr[dmanr];
- dmawp = (unsigned short *) dma_base_addr[dmanr];
-
- // Clear config errors
- dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE;
-
- // Set command register
- dmawp[MCFDMA_DCR] =
- MCFDMA_DCR_INT | // Enable completion irq
- MCFDMA_DCR_CS | // Force one xfer per request
- MCFDMA_DCR_AA | // Enable auto alignment
- // single-address-mode
- ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) |
- // sets s_rw (-> r/w) high if Memory to I/0
- ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) |
- // Memory to I/O or I/O to Memory
- ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) |
- // 32 bit, 16 bit or 8 bit transfers
- ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_SSIZE_WORD :
- ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG :
- MCFDMA_DCR_SSIZE_BYTE)) |
- ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_DSIZE_WORD :
- ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG :
- MCFDMA_DCR_DSIZE_BYTE));
-
-#ifdef DEBUG_DMA
- printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__,
- dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR],
- (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]);
-#endif
-}
-
-/* Set transfer address for specific DMA channel */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
- volatile unsigned short *dmawp;
- volatile unsigned int *dmalp;
-
-#ifdef DMA_DEBUG
- printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
- dmawp = (unsigned short *) dma_base_addr[dmanr];
- dmalp = (unsigned int *) dma_base_addr[dmanr];
-
- // Determine which address registers are used for memory/device accesses
- if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) {
- // Source incrementing, must be memory
- dmalp[MCFDMA_SAR] = a;
- // Set dest address, must be device
- dmalp[MCFDMA_DAR] = dma_device_address[dmanr];
- } else {
- // Destination incrementing, must be memory
- dmalp[MCFDMA_DAR] = a;
- // Set source address, must be device
- dmalp[MCFDMA_SAR] = dma_device_address[dmanr];
- }
-
-#ifdef DEBUG_DMA
- printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
- __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR],
- (int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR],
- (int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]);
-#endif
-}
-
-/*
- * Specific for Coldfire - sets device address.
- * Should be called after the mode set call, and before set DMA address.
- */
-static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
-{
-#ifdef DMA_DEBUG
- printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
- dma_device_address[dmanr] = a;
-}
-
-/*
- * NOTE 2: "count" represents _bytes_.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
- volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
- printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
-#endif
-
- dmawp = (unsigned short *) dma_base_addr[dmanr];
- dmawp[MCFDMA_BCR] = (unsigned short)count;
-}
-
-/*
- * Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
- volatile unsigned short *dmawp;
- unsigned short count;
-
-#ifdef DMA_DEBUG
- printk("get_dma_residue(dmanr=%d)\n", dmanr);
-#endif
-
- dmawp = (unsigned short *) dma_base_addr[dmanr];
- count = dmawp[MCFDMA_BCR];
- return((int) count);
-}
-#else /* CONFIG_M5272 is defined */
-
-/*
- * The MCF5272 DMA controller is very different than the controller defined above
- * in terms of register mapping. For instance, with the exception of the 16-bit
- * interrupt register (IRQ#85, for reference), all of the registers are 32-bit.
- *
- * The big difference, however, is the lack of device-requested DMA. All modes
- * are dual address transfer, and there is no 'device' setup or direction bit.
- * You can DMA between a device and memory, between memory and memory, or even between
- * two devices directly, with any combination of incrementing and non-incrementing
- * addresses you choose. This puts a crimp in distinguishing between the 'device
- * address' set up by set_dma_device_addr.
- *
- * Therefore, there are two options. One is to use set_dma_addr and set_dma_device_addr,
- * which will act exactly as above in -- it will look to see if the source is set to
- * autoincrement, and if so it will make the source use the set_dma_addr value and the
- * destination the set_dma_device_addr value. Otherwise the source will be set to the
- * set_dma_device_addr value and the destination will get the set_dma_addr value.
- *
- * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions
- * and make it explicit. Depending on what you're doing, one of these two should work
- * for you, but don't mix them in the same transfer setup.
- */
-
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
- volatile unsigned int *dmalp;
-
-#ifdef DMA_DEBUG
- printk("enable_dma(dmanr=%d)\n", dmanr);
-#endif
-
- dmalp = (unsigned int *) dma_base_addr[dmanr];
- dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN;
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
- volatile unsigned int *dmalp;
-
-#ifdef DMA_DEBUG
- printk("disable_dma(dmanr=%d)\n", dmanr);
-#endif
-
- dmalp = (unsigned int *) dma_base_addr[dmanr];
-
- /* Turn off external requests, and stop any DMA in progress */
- dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN;
- dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
-}
-
-/*
- * Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while interrupts are disabled! ---
- *
- * This is a NOP for ColdFire. Provide a stub for compatibility.
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
-
- volatile unsigned int *dmalp;
- volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
- printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
-#endif
- dmalp = (unsigned int *) dma_base_addr[dmanr];
- dmawp = (unsigned short *) dma_base_addr[dmanr];
-
- // Clear config errors
- dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
-
- // Set command register
- dmalp[MCFDMA_DMR] =
- MCFDMA_DMR_RQM_DUAL | // Mandatory Request Mode setting
- MCFDMA_DMR_DSTT_SD | // Set up addressing types; set to supervisor-data.
- MCFDMA_DMR_SRCT_SD | // Set up addressing types; set to supervisor-data.
- // source static-address-mode
- ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) |
- // dest static-address-mode
- ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) |
- // burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272
- (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) |
- (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF);
-
- dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN; /* Enable completion interrupts */
-
-#ifdef DEBUG_DMA
- printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__,
- dmanr, (int) &dmalp[MCFDMA_DMR], dmabp[MCFDMA_DMR],
- (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]);
-#endif
-}
-
-/* Set transfer address for specific DMA channel */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
- volatile unsigned int *dmalp;
-
-#ifdef DMA_DEBUG
- printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
- dmalp = (unsigned int *) dma_base_addr[dmanr];
-
- // Determine which address registers are used for memory/device accesses
- if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) {
- // Source incrementing, must be memory
- dmalp[MCFDMA_DSAR] = a;
- // Set dest address, must be device
- dmalp[MCFDMA_DDAR] = dma_device_address[dmanr];
- } else {
- // Destination incrementing, must be memory
- dmalp[MCFDMA_DDAR] = a;
- // Set source address, must be device
- dmalp[MCFDMA_DSAR] = dma_device_address[dmanr];
- }
-
-#ifdef DEBUG_DMA
- printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
- __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DMR], dmawp[MCFDMA_DMR],
- (int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR],
- (int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]);
-#endif
-}
-
-/*
- * Specific for Coldfire - sets device address.
- * Should be called after the mode set call, and before set DMA address.
- */
-static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
-{
-#ifdef DMA_DEBUG
- printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
- dma_device_address[dmanr] = a;
-}
-
-/*
- * NOTE 2: "count" represents _bytes_.
- *
- * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
- volatile unsigned int *dmalp;
-
-#ifdef DMA_DEBUG
- printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
-#endif
-
- dmalp = (unsigned int *) dma_base_addr[dmanr];
- dmalp[MCFDMA_DBCR] = count;
-}
-
-/*
- * Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
- volatile unsigned int *dmalp;
- unsigned int count;
-
-#ifdef DMA_DEBUG
- printk("get_dma_residue(dmanr=%d)\n", dmanr);
-#endif
-
- dmalp = (unsigned int *) dma_base_addr[dmanr];
- count = dmalp[MCFDMA_DBCR];
- return(count);
-}
-
-#endif /* !defined(CONFIG_M5272) */
-#endif /* CONFIG_COLDFIRE */
-
-#define MAX_DMA_CHANNELS 8
-
-/* Don't define MAX_DMA_ADDRESS; it's useless on the m68k/coldfire and any
- occurrence should be flagged as an error. */
-/* under 2.4 it is actually needed by the new bootmem allocator */
-#define MAX_DMA_ADDRESS PAGE_OFFSET
-
-/* These are in kernel/dma.c: */
-extern int request_dma(unsigned int dmanr, const char *device_id); /* reserve a DMA channel */
-extern void free_dma(unsigned int dmanr); /* release it again */
-
-#endif /* _M68K_DMA_H */
diff --git a/arch/m68k/include/asm/elia.h b/arch/m68k/include/asm/elia.h
deleted file mode 100644
index e037d4e2de3..00000000000
--- a/arch/m68k/include/asm/elia.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/****************************************************************************/
-
-/*
- * elia.h -- Lineo (formerly Moreton Bay) eLIA platform support.
- *
- * (C) Copyright 1999-2000, Moreton Bay (www.moreton.com.au)
- * (C) Copyright 1999-2000, Lineo (www.lineo.com)
- */
-
-/****************************************************************************/
-#ifndef elia_h
-#define elia_h
-/****************************************************************************/
-
-#include <asm/coldfire.h>
-
-#ifdef CONFIG_eLIA
-
-/*
- * The serial port DTR and DCD lines are also on the Parallel I/O
- * as well, so define those too.
- */
-
-#define eLIA_DCD1 0x0001
-#define eLIA_DCD0 0x0002
-#define eLIA_DTR1 0x0004
-#define eLIA_DTR0 0x0008
-
-#define eLIA_PCIRESET 0x0020
-
-/*
- * Kernel macros to set and unset the LEDs.
- */
-#ifndef __ASSEMBLY__
-extern unsigned short ppdata;
-#endif /* __ASSEMBLY__ */
-
-#endif /* CONFIG_eLIA */
-
-/****************************************************************************/
-#endif /* elia_h */
diff --git a/arch/m68k/include/asm/gpio.h b/arch/m68k/include/asm/gpio.h
new file mode 100644
index 00000000000..283214dc65a
--- /dev/null
+++ b/arch/m68k/include/asm/gpio.h
@@ -0,0 +1,238 @@
+/*
+ * Coldfire generic GPIO support
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+*/
+
+#ifndef coldfire_gpio_h
+#define coldfire_gpio_h
+
+#include <linux/io.h>
+#include <asm-generic/gpio.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+/*
+ * The Freescale Coldfire family is quite varied in how they implement GPIO.
+ * Some parts have 8 bit ports, some have 16bit and some have 32bit; some have
+ * only one port, others have multiple ports; some have a single data latch
+ * for both input and output, others have a separate pin data register to read
+ * input; some require a read-modify-write access to change an output, others
+ * have set and clear registers for some of the outputs; Some have all the
+ * GPIOs in a single control area, others have some GPIOs implemented in
+ * different modules.
+ *
+ * This implementation attempts accomodate the differences while presenting
+ * a generic interface that will optimize to as few instructions as possible.
+ */
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
+ defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
+ defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
+
+/* These parts have GPIO organized by 8 bit ports */
+
+#define MCFGPIO_PORTTYPE u8
+#define MCFGPIO_PORTSIZE 8
+#define mcfgpio_read(port) __raw_readb(port)
+#define mcfgpio_write(data, port) __raw_writeb(data, port)
+
+#elif defined(CONFIG_M5307) || defined(CONFIG_M5407) || defined(CONFIG_M5272)
+
+/* These parts have GPIO organized by 16 bit ports */
+
+#define MCFGPIO_PORTTYPE u16
+#define MCFGPIO_PORTSIZE 16
+#define mcfgpio_read(port) __raw_readw(port)
+#define mcfgpio_write(data, port) __raw_writew(data, port)
+
+#elif defined(CONFIG_M5249)
+
+/* These parts have GPIO organized by 32 bit ports */
+
+#define MCFGPIO_PORTTYPE u32
+#define MCFGPIO_PORTSIZE 32
+#define mcfgpio_read(port) __raw_readl(port)
+#define mcfgpio_write(data, port) __raw_writel(data, port)
+
+#endif
+
+#define mcfgpio_bit(gpio) (1 << ((gpio) % MCFGPIO_PORTSIZE))
+#define mcfgpio_port(gpio) ((gpio) / MCFGPIO_PORTSIZE)
+
+#if defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
+ defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
+/*
+ * These parts have an 'Edge' Port module (external interrupt/GPIO) which uses
+ * read-modify-write to change an output and a GPIO module which has separate
+ * set/clr registers to directly change outputs with a single write access.
+ */
+#if defined(CONFIG_M528x)
+/*
+ * The 528x also has GPIOs in other modules (GPT, QADC) which use
+ * read-modify-write as well as those controlled by the EPORT and GPIO modules.
+ */
+#define MCFGPIO_SCR_START 40
+#else
+#define MCFGPIO_SCR_START 8
+#endif
+
+#define MCFGPIO_SETR_PORT(gpio) (MCFGPIO_SETR + \
+ mcfgpio_port(gpio - MCFGPIO_SCR_START))
+
+#define MCFGPIO_CLRR_PORT(gpio) (MCFGPIO_CLRR + \
+ mcfgpio_port(gpio - MCFGPIO_SCR_START))
+#else
+
+#define MCFGPIO_SCR_START MCFGPIO_PIN_MAX
+/* with MCFGPIO_SCR == MCFGPIO_PIN_MAX, these will be optimized away */
+#define MCFGPIO_SETR_PORT(gpio) 0
+#define MCFGPIO_CLRR_PORT(gpio) 0
+
+#endif
+/*
+ * Coldfire specific helper functions
+ */
+
+/* return the port pin data register for a gpio */
+static inline u32 __mcf_gpio_ppdr(unsigned gpio)
+{
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
+ defined(CONFIG_M5307) || defined(CONFIG_M5407)
+ return MCFSIM_PADAT;
+#elif defined(CONFIG_M5272)
+ if (gpio < 16)
+ return MCFSIM_PADAT;
+ else if (gpio < 32)
+ return MCFSIM_PBDAT;
+ else
+ return MCFSIM_PCDAT;
+#elif defined(CONFIG_M5249)
+ if (gpio < 32)
+ return MCFSIM2_GPIOREAD;
+ else
+ return MCFSIM2_GPIO1READ;
+#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
+ defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
+ if (gpio < 8)
+ return MCFEPORT_EPPDR;
+#if defined(CONFIG_M528x)
+ else if (gpio < 16)
+ return MCFGPTA_GPTPORT;
+ else if (gpio < 24)
+ return MCFGPTB_GPTPORT;
+ else if (gpio < 32)
+ return MCFQADC_PORTQA;
+ else if (gpio < 40)
+ return MCFQADC_PORTQB;
+#endif
+ else
+ return MCFGPIO_PPDR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
+#endif
+}
+
+/* return the port output data register for a gpio */
+static inline u32 __mcf_gpio_podr(unsigned gpio)
+{
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
+ defined(CONFIG_M5307) || defined(CONFIG_M5407)
+ return MCFSIM_PADAT;
+#elif defined(CONFIG_M5272)
+ if (gpio < 16)
+ return MCFSIM_PADAT;
+ else if (gpio < 32)
+ return MCFSIM_PBDAT;
+ else
+ return MCFSIM_PCDAT;
+#elif defined(CONFIG_M5249)
+ if (gpio < 32)
+ return MCFSIM2_GPIOWRITE;
+ else
+ return MCFSIM2_GPIO1WRITE;
+#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
+ defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
+ if (gpio < 8)
+ return MCFEPORT_EPDR;
+#if defined(CONFIG_M528x)
+ else if (gpio < 16)
+ return MCFGPTA_GPTPORT;
+ else if (gpio < 24)
+ return MCFGPTB_GPTPORT;
+ else if (gpio < 32)
+ return MCFQADC_PORTQA;
+ else if (gpio < 40)
+ return MCFQADC_PORTQB;
+#endif
+ else
+ return MCFGPIO_PODR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
+#endif
+}
+
+/*
+ * The Generic GPIO functions
+ *
+ * If the gpio is a compile time constant and is one of the Coldfire gpios,
+ * use the inline version, otherwise dispatch thru gpiolib.
+ */
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ if (__builtin_constant_p(gpio) && gpio < MCFGPIO_PIN_MAX)
+ return mcfgpio_read(__mcf_gpio_ppdr(gpio)) & mcfgpio_bit(gpio);
+ else
+ return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ if (__builtin_constant_p(gpio) && gpio < MCFGPIO_PIN_MAX) {
+ if (gpio < MCFGPIO_SCR_START) {
+ unsigned long flags;
+ MCFGPIO_PORTTYPE data;
+
+ local_irq_save(flags);
+ data = mcfgpio_read(__mcf_gpio_podr(gpio));
+ if (value)
+ data |= mcfgpio_bit(gpio);
+ else
+ data &= ~mcfgpio_bit(gpio);
+ mcfgpio_write(data, __mcf_gpio_podr(gpio));
+ local_irq_restore(flags);
+ } else {
+ if (value)
+ mcfgpio_write(mcfgpio_bit(gpio),
+ MCFGPIO_SETR_PORT(gpio));
+ else
+ mcfgpio_write(~mcfgpio_bit(gpio),
+ MCFGPIO_CLRR_PORT(gpio));
+ }
+ } else
+ __gpio_set_value(gpio, value);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+ return (gpio < MCFGPIO_IRQ_MAX) ? gpio + MCFGPIO_IRQ_VECBASE : -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+ return (irq >= MCFGPIO_IRQ_VECBASE &&
+ irq < (MCFGPIO_IRQ_VECBASE + MCFGPIO_IRQ_MAX)) ?
+ irq - MCFGPIO_IRQ_VECBASE : -ENXIO;
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+ return gpio < MCFGPIO_PIN_MAX ? 0 : __gpio_cansleep(gpio);
+}
+
+#endif
diff --git a/arch/m68k/include/asm/hardirq_mm.h b/arch/m68k/include/asm/hardirq_mm.h
index 394ee946015..554f65b6cd3 100644
--- a/arch/m68k/include/asm/hardirq_mm.h
+++ b/arch/m68k/include/asm/hardirq_mm.h
@@ -1,16 +1,8 @@
#ifndef __M68K_HARDIRQ_H
#define __M68K_HARDIRQ_H
-#include <linux/threads.h>
-#include <linux/cache.h>
-
-/* entry.S is sensitive to the offsets of these fields */
-typedef struct {
- unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
-
#define HARDIRQ_BITS 8
+#include <asm-generic/hardirq.h>
+
#endif
diff --git a/arch/m68k/include/asm/hardirq_no.h b/arch/m68k/include/asm/hardirq_no.h
index bfad28149a4..b44b14be87d 100644
--- a/arch/m68k/include/asm/hardirq_no.h
+++ b/arch/m68k/include/asm/hardirq_no.h
@@ -1,16 +1,8 @@
#ifndef __M68K_HARDIRQ_H
#define __M68K_HARDIRQ_H
-#include <linux/cache.h>
-#include <linux/threads.h>
#include <asm/irq.h>
-typedef struct {
- unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
-
#define HARDIRQ_BITS 8
/*
@@ -22,6 +14,6 @@ typedef struct {
# error HARDIRQ_BITS is too low!
#endif
-void ack_bad_irq(unsigned int irq);
+#include <asm-generic/hardirq.h>
#endif /* __M68K_HARDIRQ_H */
diff --git a/arch/m68k/include/asm/io_no.h b/arch/m68k/include/asm/io_no.h
index 6adef1ee208..7f57436ec18 100644
--- a/arch/m68k/include/asm/io_no.h
+++ b/arch/m68k/include/asm/io_no.h
@@ -134,7 +134,7 @@ static inline void io_insl(unsigned int addr, void *buf, int len)
#define insw(a,b,l) io_insw(a,b,l)
#define insl(a,b,l) io_insl(a,b,l)
-#define IO_SPACE_LIMIT 0xffff
+#define IO_SPACE_LIMIT 0xffffffff
/* Values for nocacheflag and cmode */
diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h
index d031416595b..907eff1edd2 100644
--- a/arch/m68k/include/asm/irq.h
+++ b/arch/m68k/include/asm/irq.h
@@ -1,5 +1,134 @@
-#ifdef __uClinux__
-#include "irq_no.h"
+#ifndef _M68K_IRQ_H_
+#define _M68K_IRQ_H_
+
+/*
+ * This should be the same as the max(NUM_X_SOURCES) for all the
+ * different m68k hosts compiled into the kernel.
+ * Currently the Atari has 72 and the Amiga 24, but if both are
+ * supported in the kernel it is better to make room for 72.
+ */
+#if defined(CONFIG_COLDFIRE)
+#define NR_IRQS 256
+#elif defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X)
+#define NR_IRQS 200
+#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC)
+#define NR_IRQS 72
+#elif defined(CONFIG_Q40)
+#define NR_IRQS 43
+#elif defined(CONFIG_AMIGA) || !defined(CONFIG_MMU)
+#define NR_IRQS 32
+#elif defined(CONFIG_APOLLO)
+#define NR_IRQS 24
+#elif defined(CONFIG_HP300)
+#define NR_IRQS 8
#else
-#include "irq_mm.h"
+#define NR_IRQS 0
#endif
+
+#ifdef CONFIG_MMU
+
+#include <linux/linkage.h>
+#include <linux/hardirq.h>
+#include <linux/irqreturn.h>
+#include <linux/spinlock_types.h>
+
+/*
+ * The hardirq mask has to be large enough to have
+ * space for potentially all IRQ sources in the system
+ * nesting on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+/*
+ * Interrupt source definitions
+ * General interrupt sources are the level 1-7.
+ * Adding an interrupt service routine for one of these sources
+ * results in the addition of that routine to a chain of routines.
+ * Each one is called in succession. Each individual interrupt
+ * service routine should determine if the device associated with
+ * that routine requires service.
+ */
+
+#define IRQ_SPURIOUS 0
+
+#define IRQ_AUTO_1 1 /* level 1 interrupt */
+#define IRQ_AUTO_2 2 /* level 2 interrupt */
+#define IRQ_AUTO_3 3 /* level 3 interrupt */
+#define IRQ_AUTO_4 4 /* level 4 interrupt */
+#define IRQ_AUTO_5 5 /* level 5 interrupt */
+#define IRQ_AUTO_6 6 /* level 6 interrupt */
+#define IRQ_AUTO_7 7 /* level 7 interrupt (non-maskable) */
+
+#define IRQ_USER 8
+
+extern unsigned int irq_canonicalize(unsigned int irq);
+
+struct pt_regs;
+
+/*
+ * various flags for request_irq() - the Amiga now uses the standard
+ * mechanism like all other architectures - IRQF_DISABLED and
+ * IRQF_SHARED are your friends.
+ */
+#ifndef MACH_AMIGA_ONLY
+#define IRQ_FLG_LOCK (0x0001) /* handler is not replaceable */
+#define IRQ_FLG_REPLACE (0x0002) /* replace existing handler */
+#define IRQ_FLG_FAST (0x0004)
+#define IRQ_FLG_SLOW (0x0008)
+#define IRQ_FLG_STD (0x8000) /* internally used */
+#endif
+
+/*
+ * This structure is used to chain together the ISRs for a particular
+ * interrupt source (if it supports chaining).
+ */
+typedef struct irq_node {
+ irqreturn_t (*handler)(int, void *);
+ void *dev_id;
+ struct irq_node *next;
+ unsigned long flags;
+ const char *devname;
+} irq_node_t;
+
+/*
+ * This structure has only 4 elements for speed reasons
+ */
+struct irq_handler {
+ int (*handler)(int, void *);
+ unsigned long flags;
+ void *dev_id;
+ const char *devname;
+};
+
+struct irq_controller {
+ const char *name;
+ spinlock_t lock;
+ int (*startup)(unsigned int irq);
+ void (*shutdown)(unsigned int irq);
+ void (*enable)(unsigned int irq);
+ void (*disable)(unsigned int irq);
+};
+
+extern int m68k_irq_startup(unsigned int);
+extern void m68k_irq_shutdown(unsigned int);
+
+/*
+ * This function returns a new irq_node_t
+ */
+extern irq_node_t *new_irq_node(void);
+
+extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *));
+extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt,
+ void (*handler)(unsigned int, struct pt_regs *));
+extern void m68k_setup_irq_controller(struct irq_controller *, unsigned int, unsigned int);
+
+asmlinkage void m68k_handle_int(unsigned int);
+asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *);
+
+#else
+#define irq_canonicalize(irq) (irq)
+#endif /* CONFIG_MMU */
+
+#endif /* _M68K_IRQ_H_ */
diff --git a/arch/m68k/include/asm/irq_mm.h b/arch/m68k/include/asm/irq_mm.h
deleted file mode 100644
index 0cab42cad79..00000000000
--- a/arch/m68k/include/asm/irq_mm.h
+++ /dev/null
@@ -1,126 +0,0 @@
-#ifndef _M68K_IRQ_H_
-#define _M68K_IRQ_H_
-
-#include <linux/linkage.h>
-#include <linux/hardirq.h>
-#include <linux/irqreturn.h>
-#include <linux/spinlock_types.h>
-
-/*
- * This should be the same as the max(NUM_X_SOURCES) for all the
- * different m68k hosts compiled into the kernel.
- * Currently the Atari has 72 and the Amiga 24, but if both are
- * supported in the kernel it is better to make room for 72.
- */
-#if defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X)
-#define NR_IRQS 200
-#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC)
-#define NR_IRQS 72
-#elif defined(CONFIG_Q40)
-#define NR_IRQS 43
-#elif defined(CONFIG_AMIGA)
-#define NR_IRQS 32
-#elif defined(CONFIG_APOLLO)
-#define NR_IRQS 24
-#elif defined(CONFIG_HP300)
-#define NR_IRQS 8
-#else
-#define NR_IRQS 0
-#endif
-
-/*
- * The hardirq mask has to be large enough to have
- * space for potentially all IRQ sources in the system
- * nesting on a single CPU:
- */
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
-/*
- * Interrupt source definitions
- * General interrupt sources are the level 1-7.
- * Adding an interrupt service routine for one of these sources
- * results in the addition of that routine to a chain of routines.
- * Each one is called in succession. Each individual interrupt
- * service routine should determine if the device associated with
- * that routine requires service.
- */
-
-#define IRQ_SPURIOUS 0
-
-#define IRQ_AUTO_1 1 /* level 1 interrupt */
-#define IRQ_AUTO_2 2 /* level 2 interrupt */
-#define IRQ_AUTO_3 3 /* level 3 interrupt */
-#define IRQ_AUTO_4 4 /* level 4 interrupt */
-#define IRQ_AUTO_5 5 /* level 5 interrupt */
-#define IRQ_AUTO_6 6 /* level 6 interrupt */
-#define IRQ_AUTO_7 7 /* level 7 interrupt (non-maskable) */
-
-#define IRQ_USER 8
-
-extern unsigned int irq_canonicalize(unsigned int irq);
-
-struct pt_regs;
-
-/*
- * various flags for request_irq() - the Amiga now uses the standard
- * mechanism like all other architectures - IRQF_DISABLED and
- * IRQF_SHARED are your friends.
- */
-#ifndef MACH_AMIGA_ONLY
-#define IRQ_FLG_LOCK (0x0001) /* handler is not replaceable */
-#define IRQ_FLG_REPLACE (0x0002) /* replace existing handler */
-#define IRQ_FLG_FAST (0x0004)
-#define IRQ_FLG_SLOW (0x0008)
-#define IRQ_FLG_STD (0x8000) /* internally used */
-#endif
-
-/*
- * This structure is used to chain together the ISRs for a particular
- * interrupt source (if it supports chaining).
- */
-typedef struct irq_node {
- irqreturn_t (*handler)(int, void *);
- void *dev_id;
- struct irq_node *next;
- unsigned long flags;
- const char *devname;
-} irq_node_t;
-
-/*
- * This structure has only 4 elements for speed reasons
- */
-struct irq_handler {
- int (*handler)(int, void *);
- unsigned long flags;
- void *dev_id;
- const char *devname;
-};
-
-struct irq_controller {
- const char *name;
- spinlock_t lock;
- int (*startup)(unsigned int irq);
- void (*shutdown)(unsigned int irq);
- void (*enable)(unsigned int irq);
- void (*disable)(unsigned int irq);
-};
-
-extern int m68k_irq_startup(unsigned int);
-extern void m68k_irq_shutdown(unsigned int);
-
-/*
- * This function returns a new irq_node_t
- */
-extern irq_node_t *new_irq_node(void);
-
-extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *));
-extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt,
- void (*handler)(unsigned int, struct pt_regs *));
-extern void m68k_setup_irq_controller(struct irq_controller *, unsigned int, unsigned int);
-
-asmlinkage void m68k_handle_int(unsigned int);
-asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *);
-
-#endif /* _M68K_IRQ_H_ */
diff --git a/arch/m68k/include/asm/irq_no.h b/arch/m68k/include/asm/irq_no.h
deleted file mode 100644
index 9373c31ac87..00000000000
--- a/arch/m68k/include/asm/irq_no.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef _M68KNOMMU_IRQ_H_
-#define _M68KNOMMU_IRQ_H_
-
-#ifdef CONFIG_COLDFIRE
-/*
- * On the ColdFire we keep track of all vectors. That way drivers
- * can register whatever vector number they wish, and we can deal
- * with it.
- */
-#define SYS_IRQS 256
-#define NR_IRQS SYS_IRQS
-
-#else
-
-/*
- * # of m68k interrupts
- */
-#define SYS_IRQS 8
-#define NR_IRQS (24 + SYS_IRQS)
-
-#endif /* CONFIG_COLDFIRE */
-
-
-#define irq_canonicalize(irq) (irq)
-
-#endif /* _M68KNOMMU_IRQ_H_ */
diff --git a/arch/m68k/include/asm/m5206sim.h b/arch/m68k/include/asm/m5206sim.h
index 7e3594dea88..9c384e294af 100644
--- a/arch/m68k/include/asm/m5206sim.h
+++ b/arch/m68k/include/asm/m5206sim.h
@@ -85,8 +85,21 @@
#define MCFSIM_PAR 0xcb /* Pin Assignment reg (r/w) */
#endif
-#define MCFSIM_PADDR 0x1c5 /* Parallel Direction (r/w) */
-#define MCFSIM_PADAT 0x1c9 /* Parallel Port Value (r/w) */
+#define MCFSIM_PADDR (MCF_MBAR + 0x1c5) /* Parallel Direction (r/w) */
+#define MCFSIM_PADAT (MCF_MBAR + 0x1c9) /* Parallel Port Value (r/w) */
+
+/*
+ * Define system peripheral IRQ usage.
+ */
+#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */
+#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
+
+/*
+ * Generic GPIO
+ */
+#define MCFGPIO_PIN_MAX 8
+#define MCFGPIO_IRQ_VECBASE -1
+#define MCFGPIO_IRQ_MAX -1
/*
* Some symbol defines for the Parallel Port Pin Assignment Register
@@ -111,21 +124,5 @@
#define MCFSIM_DMA2ICR MCFSIM_ICR15 /* DMA 2 ICR */
#endif
-#if defined(CONFIG_M5206e)
-#define MCFSIM_IMR_MASKALL 0xfffe /* All SIM intr sources */
-#endif
-
-/*
- * Macro to get and set IMR register. It is 16 bits on the 5206.
- */
-#define mcf_getimr() \
- *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR))
-
-#define mcf_setimr(imr) \
- *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR)) = (imr)
-
-#define mcf_getipr() \
- *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IPR))
-
/****************************************************************************/
#endif /* m5206sim_h */
diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h
index 83bbcfd6e8f..ed2b69b9680 100644
--- a/arch/m68k/include/asm/m520xsim.h
+++ b/arch/m68k/include/asm/m520xsim.h
@@ -11,9 +11,8 @@
#define m520xsim_h
/****************************************************************************/
-
/*
- * Define the 5282 SIM register set addresses.
+ * Define the 520x SIM register set addresses.
*/
#define MCFICM_INTC0 0x48000 /* Base for Interrupt Ctrl 0 */
#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */
@@ -22,8 +21,22 @@
#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */
#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */
#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */
+#define MCFINTC_SIMR 0x1c /* Set interrupt mask 0-63 */
+#define MCFINTC_CIMR 0x1d /* Clear interrupt mask 0-63 */
#define MCFINTC_ICR0 0x40 /* Base ICR register */
+/*
+ * The common interrupt controller code just wants to know the absolute
+ * address to the SIMR and CIMR registers (not offsets into IPSBAR).
+ * The 520x family only has a single INTC unit.
+ */
+#define MCFINTC0_SIMR (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_SIMR)
+#define MCFINTC0_CIMR (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_CIMR)
+#define MCFINTC0_ICR0 (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0)
+#define MCFINTC1_SIMR (0)
+#define MCFINTC1_CIMR (0)
+#define MCFINTC1_ICR0 (0)
+
#define MCFINT_VECBASE 64
#define MCFINT_UART0 26 /* Interrupt number for UART0 */
#define MCFINT_UART1 27 /* Interrupt number for UART1 */
@@ -41,6 +54,62 @@
#define MCFSIM_SDCS0 0x000a8110 /* SDRAM Chip Select 0 Configuration */
#define MCFSIM_SDCS1 0x000a8114 /* SDRAM Chip Select 1 Configuration */
+#define MCFEPORT_EPDDR 0xFC088002
+#define MCFEPORT_EPDR 0xFC088004
+#define MCFEPORT_EPPDR 0xFC088005
+
+#define MCFGPIO_PODR_BUSCTL 0xFC0A4000
+#define MCFGPIO_PODR_BE 0xFC0A4001
+#define MCFGPIO_PODR_CS 0xFC0A4002
+#define MCFGPIO_PODR_FECI2C 0xFC0A4003
+#define MCFGPIO_PODR_QSPI 0xFC0A4004
+#define MCFGPIO_PODR_TIMER 0xFC0A4005
+#define MCFGPIO_PODR_UART 0xFC0A4006
+#define MCFGPIO_PODR_FECH 0xFC0A4007
+#define MCFGPIO_PODR_FECL 0xFC0A4008
+
+#define MCFGPIO_PDDR_BUSCTL 0xFC0A400C
+#define MCFGPIO_PDDR_BE 0xFC0A400D
+#define MCFGPIO_PDDR_CS 0xFC0A400E
+#define MCFGPIO_PDDR_FECI2C 0xFC0A400F
+#define MCFGPIO_PDDR_QSPI 0xFC0A4010
+#define MCFGPIO_PDDR_TIMER 0xFC0A4011
+#define MCFGPIO_PDDR_UART 0xFC0A4012
+#define MCFGPIO_PDDR_FECH 0xFC0A4013
+#define MCFGPIO_PDDR_FECL 0xFC0A4014
+
+#define MCFGPIO_PPDSDR_BUSCTL 0xFC0A401A
+#define MCFGPIO_PPDSDR_BE 0xFC0A401B
+#define MCFGPIO_PPDSDR_CS 0xFC0A401C
+#define MCFGPIO_PPDSDR_FECI2C 0xFC0A401D
+#define MCFGPIO_PPDSDR_QSPI 0xFC0A401E
+#define MCFGPIO_PPDSDR_TIMER 0xFC0A401F
+#define MCFGPIO_PPDSDR_UART 0xFC0A4021
+#define MCFGPIO_PPDSDR_FECH 0xFC0A4021
+#define MCFGPIO_PPDSDR_FECL 0xFC0A4022
+
+#define MCFGPIO_PCLRR_BUSCTL 0xFC0A4024
+#define MCFGPIO_PCLRR_BE 0xFC0A4025
+#define MCFGPIO_PCLRR_CS 0xFC0A4026
+#define MCFGPIO_PCLRR_FECI2C 0xFC0A4027
+#define MCFGPIO_PCLRR_QSPI 0xFC0A4028
+#define MCFGPIO_PCLRR_TIMER 0xFC0A4029
+#define MCFGPIO_PCLRR_UART 0xFC0A402A
+#define MCFGPIO_PCLRR_FECH 0xFC0A402B
+#define MCFGPIO_PCLRR_FECL 0xFC0A402C
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PODR MCFGPIO_PODR_BUSCTL
+#define MCFGPIO_PDDR MCFGPIO_PDDR_BUSCTL
+#define MCFGPIO_PPDR MCFGPIO_PPDSDR_BUSCTL
+#define MCFGPIO_SETR MCFGPIO_PPDSDR_BUSCTL
+#define MCFGPIO_CLRR MCFGPIO_PCLRR_BUSCTL
+
+#define MCFGPIO_PIN_MAX 80
+#define MCFGPIO_IRQ_MAX 8
+#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE
+/****************************************************************************/
#define MCF_GPIO_PAR_UART (0xA4036)
#define MCF_GPIO_PAR_FECI2C (0xA4033)
@@ -55,10 +124,6 @@
#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2 (0x02)
#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04)
-#define ICR_INTRCONF 0x05
-#define MCFPIT_IMR MCFINTC_IMRL
-#define MCFPIT_IMR_IBIT (1 << MCFINT_PIT1)
-
/*
* Reset Controll Unit.
*/
diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h
index 55183b5df1b..a34894cf8e6 100644
--- a/arch/m68k/include/asm/m523xsim.h
+++ b/arch/m68k/include/asm/m523xsim.h
@@ -50,5 +50,82 @@
#define MCF_RCR_SWRESET 0x80 /* Software reset bit */
#define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */
+#define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100000)
+#define MCFGPIO_PODR_DATAH (MCF_IPSBAR + 0x100001)
+#define MCFGPIO_PODR_DATAL (MCF_IPSBAR + 0x100002)
+#define MCFGPIO_PODR_BUSCTL (MCF_IPSBAR + 0x100003)
+#define MCFGPIO_PODR_BS (MCF_IPSBAR + 0x100004)
+#define MCFGPIO_PODR_CS (MCF_IPSBAR + 0x100005)
+#define MCFGPIO_PODR_SDRAM (MCF_IPSBAR + 0x100006)
+#define MCFGPIO_PODR_FECI2C (MCF_IPSBAR + 0x100007)
+#define MCFGPIO_PODR_UARTH (MCF_IPSBAR + 0x100008)
+#define MCFGPIO_PODR_UARTL (MCF_IPSBAR + 0x100009)
+#define MCFGPIO_PODR_QSPI (MCF_IPSBAR + 0x10000A)
+#define MCFGPIO_PODR_TIMER (MCF_IPSBAR + 0x10000B)
+#define MCFGPIO_PODR_ETPU (MCF_IPSBAR + 0x10000C)
+
+#define MCFGPIO_PDDR_ADDR (MCF_IPSBAR + 0x100010)
+#define MCFGPIO_PDDR_DATAH (MCF_IPSBAR + 0x100011)
+#define MCFGPIO_PDDR_DATAL (MCF_IPSBAR + 0x100012)
+#define MCFGPIO_PDDR_BUSCTL (MCF_IPSBAR + 0x100013)
+#define MCFGPIO_PDDR_BS (MCF_IPSBAR + 0x100014)
+#define MCFGPIO_PDDR_CS (MCF_IPSBAR + 0x100015)
+#define MCFGPIO_PDDR_SDRAM (MCF_IPSBAR + 0x100016)
+#define MCFGPIO_PDDR_FECI2C (MCF_IPSBAR + 0x100017)
+#define MCFGPIO_PDDR_UARTH (MCF_IPSBAR + 0x100018)
+#define MCFGPIO_PDDR_UARTL (MCF_IPSBAR + 0x100019)
+#define MCFGPIO_PDDR_QSPI (MCF_IPSBAR + 0x10001A)
+#define MCFGPIO_PDDR_TIMER (MCF_IPSBAR + 0x10001B)
+#define MCFGPIO_PDDR_ETPU (MCF_IPSBAR + 0x10001C)
+
+#define MCFGPIO_PPDSDR_ADDR (MCF_IPSBAR + 0x100020)
+#define MCFGPIO_PPDSDR_DATAH (MCF_IPSBAR + 0x100021)
+#define MCFGPIO_PPDSDR_DATAL (MCF_IPSBAR + 0x100022)
+#define MCFGPIO_PPDSDR_BUSCTL (MCF_IPSBAR + 0x100023)
+#define MCFGPIO_PPDSDR_BS (MCF_IPSBAR + 0x100024)
+#define MCFGPIO_PPDSDR_CS (MCF_IPSBAR + 0x100025)
+#define MCFGPIO_PPDSDR_SDRAM (MCF_IPSBAR + 0x100026)
+#define MCFGPIO_PPDSDR_FECI2C (MCF_IPSBAR + 0x100027)
+#define MCFGPIO_PPDSDR_UARTH (MCF_IPSBAR + 0x100028)
+#define MCFGPIO_PPDSDR_UARTL (MCF_IPSBAR + 0x100029)
+#define MCFGPIO_PPDSDR_QSPI (MCF_IPSBAR + 0x10002A)
+#define MCFGPIO_PPDSDR_TIMER (MCF_IPSBAR + 0x10002B)
+#define MCFGPIO_PPDSDR_ETPU (MCF_IPSBAR + 0x10002C)
+
+#define MCFGPIO_PCLRR_ADDR (MCF_IPSBAR + 0x100030)
+#define MCFGPIO_PCLRR_DATAH (MCF_IPSBAR + 0x100031)
+#define MCFGPIO_PCLRR_DATAL (MCF_IPSBAR + 0x100032)
+#define MCFGPIO_PCLRR_BUSCTL (MCF_IPSBAR + 0x100033)
+#define MCFGPIO_PCLRR_BS (MCF_IPSBAR + 0x100034)
+#define MCFGPIO_PCLRR_CS (MCF_IPSBAR + 0x100035)
+#define MCFGPIO_PCLRR_SDRAM (MCF_IPSBAR + 0x100036)
+#define MCFGPIO_PCLRR_FECI2C (MCF_IPSBAR + 0x100037)
+#define MCFGPIO_PCLRR_UARTH (MCF_IPSBAR + 0x100038)
+#define MCFGPIO_PCLRR_UARTL (MCF_IPSBAR + 0x100039)
+#define MCFGPIO_PCLRR_QSPI (MCF_IPSBAR + 0x10003A)
+#define MCFGPIO_PCLRR_TIMER (MCF_IPSBAR + 0x10003B)
+#define MCFGPIO_PCLRR_ETPU (MCF_IPSBAR + 0x10003C)
+
+/*
+ * EPort
+ */
+
+#define MCFEPORT_EPDDR (MCF_IPSBAR + 0x130002)
+#define MCFEPORT_EPDR (MCF_IPSBAR + 0x130004)
+#define MCFEPORT_EPPDR (MCF_IPSBAR + 0x130005)
+
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PODR MCFGPIO_PODR_ADDR
+#define MCFGPIO_PDDR MCFGPIO_PDDR_ADDR
+#define MCFGPIO_PPDR MCFGPIO_PPDSDR_ADDR
+#define MCFGPIO_SETR MCFGPIO_PPDSDR_ADDR
+#define MCFGPIO_CLRR MCFGPIO_PCLRR_ADDR
+
+#define MCFGPIO_PIN_MAX 107
+#define MCFGPIO_IRQ_MAX 8
+#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE
+
/****************************************************************************/
#endif /* m523xsim_h */
diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h
index 366eb8602d2..14bce877ed8 100644
--- a/arch/m68k/include/asm/m5249sim.h
+++ b/arch/m68k/include/asm/m5249sim.h
@@ -71,16 +71,22 @@
#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */
/*
+ * Define system peripheral IRQ usage.
+ */
+#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */
+#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
+
+/*
* General purpose IO registers (in MBAR2).
*/
-#define MCFSIM2_GPIOREAD 0x0 /* GPIO read values */
-#define MCFSIM2_GPIOWRITE 0x4 /* GPIO write values */
-#define MCFSIM2_GPIOENABLE 0x8 /* GPIO enabled */
-#define MCFSIM2_GPIOFUNC 0xc /* GPIO function */
-#define MCFSIM2_GPIO1READ 0xb0 /* GPIO1 read values */
-#define MCFSIM2_GPIO1WRITE 0xb4 /* GPIO1 write values */
-#define MCFSIM2_GPIO1ENABLE 0xb8 /* GPIO1 enabled */
-#define MCFSIM2_GPIO1FUNC 0xbc /* GPIO1 function */
+#define MCFSIM2_GPIOREAD (MCF_MBAR2 + 0x000) /* GPIO read values */
+#define MCFSIM2_GPIOWRITE (MCF_MBAR2 + 0x004) /* GPIO write values */
+#define MCFSIM2_GPIOENABLE (MCF_MBAR2 + 0x008) /* GPIO enabled */
+#define MCFSIM2_GPIOFUNC (MCF_MBAR2 + 0x00C) /* GPIO function */
+#define MCFSIM2_GPIO1READ (MCF_MBAR2 + 0x0B0) /* GPIO1 read values */
+#define MCFSIM2_GPIO1WRITE (MCF_MBAR2 + 0x0B4) /* GPIO1 write values */
+#define MCFSIM2_GPIO1ENABLE (MCF_MBAR2 + 0x0B8) /* GPIO1 enabled */
+#define MCFSIM2_GPIO1FUNC (MCF_MBAR2 + 0x0BC) /* GPIO1 function */
#define MCFSIM2_GPIOINTSTAT 0xc0 /* GPIO interrupt status */
#define MCFSIM2_GPIOINTCLEAR 0xc0 /* GPIO interrupt clear */
@@ -100,20 +106,28 @@
#define MCFSIM2_IDECONFIG1 0x18c /* IDEconfig1 */
#define MCFSIM2_IDECONFIG2 0x190 /* IDEconfig2 */
-
/*
- * Macro to set IMR register. It is 32 bits on the 5249.
+ * Define the base interrupt for the second interrupt controller.
+ * We set it to 128, out of the way of the base interrupts, and plenty
+ * of room for its 64 interrupts.
*/
-#define MCFSIM_IMR_MASKALL 0x7fffe /* All SIM intr sources */
+#define MCFINTC2_VECBASE 128
-#define mcf_getimr() \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
+#define MCFINTC2_GPIOIRQ0 (MCFINTC2_VECBASE + 32)
+#define MCFINTC2_GPIOIRQ1 (MCFINTC2_VECBASE + 33)
+#define MCFINTC2_GPIOIRQ2 (MCFINTC2_VECBASE + 34)
+#define MCFINTC2_GPIOIRQ3 (MCFINTC2_VECBASE + 35)
+#define MCFINTC2_GPIOIRQ4 (MCFINTC2_VECBASE + 36)
+#define MCFINTC2_GPIOIRQ5 (MCFINTC2_VECBASE + 37)
+#define MCFINTC2_GPIOIRQ6 (MCFINTC2_VECBASE + 38)
+#define MCFINTC2_GPIOIRQ7 (MCFINTC2_VECBASE + 39)
-#define mcf_setimr(imr) \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
-
-#define mcf_getipr() \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PIN_MAX 64
+#define MCFGPIO_IRQ_MAX -1
+#define MCFGPIO_IRQ_VECBASE -1
/****************************************************************************/
@@ -137,9 +151,9 @@
subql #1,%a1 /* get MBAR2 address in a1 */
/*
- * Move secondary interrupts to base at 128.
+ * Move secondary interrupts to their base (128).
*/
- moveb #0x80,%d0
+ moveb #MCFINTC2_VECBASE,%d0
moveb %d0,0x16b(%a1) /* interrupt base register */
/*
diff --git a/arch/m68k/include/asm/m5272sim.h b/arch/m68k/include/asm/m5272sim.h
index 6217edc2113..df3332c2317 100644
--- a/arch/m68k/include/asm/m5272sim.h
+++ b/arch/m68k/include/asm/m5272sim.h
@@ -12,7 +12,6 @@
#define m5272sim_h
/****************************************************************************/
-
/*
* Define the 5272 SIM register set addresses.
*/
@@ -63,16 +62,59 @@
#define MCFSIM_DCMR1 0x5c /* DRAM 1 Mask reg (r/w) */
#define MCFSIM_DCCR1 0x63 /* DRAM 1 Control reg (r/w) */
-#define MCFSIM_PACNT 0x80 /* Port A Control (r/w) */
-#define MCFSIM_PADDR 0x84 /* Port A Direction (r/w) */
-#define MCFSIM_PADAT 0x86 /* Port A Data (r/w) */
-#define MCFSIM_PBCNT 0x88 /* Port B Control (r/w) */
-#define MCFSIM_PBDDR 0x8c /* Port B Direction (r/w) */
-#define MCFSIM_PBDAT 0x8e /* Port B Data (r/w) */
-#define MCFSIM_PCDDR 0x94 /* Port C Direction (r/w) */
-#define MCFSIM_PCDAT 0x96 /* Port C Data (r/w) */
-#define MCFSIM_PDCNT 0x98 /* Port D Control (r/w) */
+#define MCFSIM_PACNT (MCF_MBAR + 0x80) /* Port A Control (r/w) */
+#define MCFSIM_PADDR (MCF_MBAR + 0x84) /* Port A Direction (r/w) */
+#define MCFSIM_PADAT (MCF_MBAR + 0x86) /* Port A Data (r/w) */
+#define MCFSIM_PBCNT (MCF_MBAR + 0x88) /* Port B Control (r/w) */
+#define MCFSIM_PBDDR (MCF_MBAR + 0x8c) /* Port B Direction (r/w) */
+#define MCFSIM_PBDAT (MCF_MBAR + 0x8e) /* Port B Data (r/w) */
+#define MCFSIM_PCDDR (MCF_MBAR + 0x94) /* Port C Direction (r/w) */
+#define MCFSIM_PCDAT (MCF_MBAR + 0x96) /* Port C Data (r/w) */
+#define MCFSIM_PDCNT (MCF_MBAR + 0x98) /* Port D Control (r/w) */
+
+/*
+ * Define system peripheral IRQ usage.
+ */
+#define MCFINT_VECBASE 64 /* Base of interrupts */
+#define MCF_IRQ_SPURIOUS 64 /* User Spurious */
+#define MCF_IRQ_EINT1 65 /* External Interrupt 1 */
+#define MCF_IRQ_EINT2 66 /* External Interrupt 2 */
+#define MCF_IRQ_EINT3 67 /* External Interrupt 3 */
+#define MCF_IRQ_EINT4 68 /* External Interrupt 4 */
+#define MCF_IRQ_TIMER1 69 /* Timer 1 */
+#define MCF_IRQ_TIMER2 70 /* Timer 2 */
+#define MCF_IRQ_TIMER3 71 /* Timer 3 */
+#define MCF_IRQ_TIMER4 72 /* Timer 4 */
+#define MCF_IRQ_UART1 73 /* UART 1 */
+#define MCF_IRQ_UART2 74 /* UART 2 */
+#define MCF_IRQ_PLIP 75 /* PLIC 2Khz Periodic */
+#define MCF_IRQ_PLIA 76 /* PLIC Asynchronous */
+#define MCF_IRQ_USB0 77 /* USB Endpoint 0 */
+#define MCF_IRQ_USB1 78 /* USB Endpoint 1 */
+#define MCF_IRQ_USB2 79 /* USB Endpoint 2 */
+#define MCF_IRQ_USB3 80 /* USB Endpoint 3 */
+#define MCF_IRQ_USB4 81 /* USB Endpoint 4 */
+#define MCF_IRQ_USB5 82 /* USB Endpoint 5 */
+#define MCF_IRQ_USB6 83 /* USB Endpoint 6 */
+#define MCF_IRQ_USB7 84 /* USB Endpoint 7 */
+#define MCF_IRQ_DMA 85 /* DMA Controller */
+#define MCF_IRQ_ERX 86 /* Ethernet Receiver */
+#define MCF_IRQ_ETX 87 /* Ethernet Transmitter */
+#define MCF_IRQ_ENTC 88 /* Ethernet Non-Time Critical */
+#define MCF_IRQ_QSPI 89 /* Queued Serial Interface */
+#define MCF_IRQ_EINT5 90 /* External Interrupt 5 */
+#define MCF_IRQ_EINT6 91 /* External Interrupt 6 */
+#define MCF_IRQ_SWTO 92 /* Software Watchdog */
+#define MCFINT_VECMAX 95 /* Maxmum interrupt */
+#define MCF_IRQ_TIMER MCF_IRQ_TIMER1
+#define MCF_IRQ_PROFILER MCF_IRQ_TIMER2
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PIN_MAX 48
+#define MCFGPIO_IRQ_MAX -1
+#define MCFGPIO_IRQ_VECBASE -1
/****************************************************************************/
#endif /* m5272sim_h */
diff --git a/arch/m68k/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h
index 95f4f8ee8f7..453356d72d8 100644
--- a/arch/m68k/include/asm/m527xsim.h
+++ b/arch/m68k/include/asm/m527xsim.h
@@ -54,6 +54,175 @@
#define MCFSIM_DMR1 0x5c /* SDRAM address mask 1 */
#endif
+
+#ifdef CONFIG_M5271
+#define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100000)
+#define MCFGPIO_PODR_DATAH (MCF_IPSBAR + 0x100001)
+#define MCFGPIO_PODR_DATAL (MCF_IPSBAR + 0x100002)
+#define MCFGPIO_PODR_BUSCTL (MCF_IPSBAR + 0x100003)
+#define MCFGPIO_PODR_BS (MCF_IPSBAR + 0x100004)
+#define MCFGPIO_PODR_CS (MCF_IPSBAR + 0x100005)
+#define MCFGPIO_PODR_SDRAM (MCF_IPSBAR + 0x100006)
+#define MCFGPIO_PODR_FECI2C (MCF_IPSBAR + 0x100007)
+#define MCFGPIO_PODR_UARTH (MCF_IPSBAR + 0x100008)
+#define MCFGPIO_PODR_UARTL (MCF_IPSBAR + 0x100009)
+#define MCFGPIO_PODR_QSPI (MCF_IPSBAR + 0x10000A)
+#define MCFGPIO_PODR_TIMER (MCF_IPSBAR + 0x10000B)
+
+#define MCFGPIO_PDDR_ADDR (MCF_IPSBAR + 0x100010)
+#define MCFGPIO_PDDR_DATAH (MCF_IPSBAR + 0x100011)
+#define MCFGPIO_PDDR_DATAL (MCF_IPSBAR + 0x100012)
+#define MCFGPIO_PDDR_BUSCTL (MCF_IPSBAR + 0x100013)
+#define MCFGPIO_PDDR_BS (MCF_IPSBAR + 0x100014)
+#define MCFGPIO_PDDR_CS (MCF_IPSBAR + 0x100015)
+#define MCFGPIO_PDDR_SDRAM (MCF_IPSBAR + 0x100016)
+#define MCFGPIO_PDDR_FECI2C (MCF_IPSBAR + 0x100017)
+#define MCFGPIO_PDDR_UARTH (MCF_IPSBAR + 0x100018)
+#define MCFGPIO_PDDR_UARTL (MCF_IPSBAR + 0x100019)
+#define MCFGPIO_PDDR_QSPI (MCF_IPSBAR + 0x10001A)
+#define MCFGPIO_PDDR_TIMER (MCF_IPSBAR + 0x10001B)
+
+#define MCFGPIO_PPDSDR_ADDR (MCF_IPSBAR + 0x100020)
+#define MCFGPIO_PPDSDR_DATAH (MCF_IPSBAR + 0x100021)
+#define MCFGPIO_PPDSDR_DATAL (MCF_IPSBAR + 0x100022)
+#define MCFGPIO_PPDSDR_BUSCTL (MCF_IPSBAR + 0x100023)
+#define MCFGPIO_PPDSDR_BS (MCF_IPSBAR + 0x100024)
+#define MCFGPIO_PPDSDR_CS (MCF_IPSBAR + 0x100025)
+#define MCFGPIO_PPDSDR_SDRAM (MCF_IPSBAR + 0x100026)
+#define MCFGPIO_PPDSDR_FECI2C (MCF_IPSBAR + 0x100027)
+#define MCFGPIO_PPDSDR_UARTH (MCF_IPSBAR + 0x100028)
+#define MCFGPIO_PPDSDR_UARTL (MCF_IPSBAR + 0x100029)
+#define MCFGPIO_PPDSDR_QSPI (MCF_IPSBAR + 0x10002A)
+#define MCFGPIO_PPDSDR_TIMER (MCF_IPSBAR + 0x10002B)
+
+#define MCFGPIO_PCLRR_ADDR (MCF_IPSBAR + 0x100030)
+#define MCFGPIO_PCLRR_DATAH (MCF_IPSBAR + 0x100031)
+#define MCFGPIO_PCLRR_DATAL (MCF_IPSBAR + 0x100032)
+#define MCFGPIO_PCLRR_BUSCTL (MCF_IPSBAR + 0x100033)
+#define MCFGPIO_PCLRR_BS (MCF_IPSBAR + 0x100034)
+#define MCFGPIO_PCLRR_CS (MCF_IPSBAR + 0x100035)
+#define MCFGPIO_PCLRR_SDRAM (MCF_IPSBAR + 0x100036)
+#define MCFGPIO_PCLRR_FECI2C (MCF_IPSBAR + 0x100037)
+#define MCFGPIO_PCLRR_UARTH (MCF_IPSBAR + 0x100038)
+#define MCFGPIO_PCLRR_UARTL (MCF_IPSBAR + 0x100039)
+#define MCFGPIO_PCLRR_QSPI (MCF_IPSBAR + 0x10003A)
+#define MCFGPIO_PCLRR_TIMER (MCF_IPSBAR + 0x10003B)
+
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PODR MCFGPIO_PODR_ADDR
+#define MCFGPIO_PDDR MCFGPIO_PDDR_ADDR
+#define MCFGPIO_PPDR MCFGPIO_PPDSDR_ADDR
+#define MCFGPIO_SETR MCFGPIO_PPDSDR_ADDR
+#define MCFGPIO_CLRR MCFGPIO_PCLRR_ADDR
+
+#define MCFGPIO_PIN_MAX 100
+#define MCFGPIO_IRQ_MAX 8
+#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE
+#endif
+
+#ifdef CONFIG_M5275
+#define MCFGPIO_PODR_BUSCTL (MCF_IPSBAR + 0x100004)
+#define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100005)
+#define MCFGPIO_PODR_CS (MCF_IPSBAR + 0x100008)
+#define MCFGPIO_PODR_FEC0H (MCF_IPSBAR + 0x10000A)
+#define MCFGPIO_PODR_FEC0L (MCF_IPSBAR + 0x10000B)
+#define MCFGPIO_PODR_FECI2C (MCF_IPSBAR + 0x10000C)
+#define MCFGPIO_PODR_QSPI (MCF_IPSBAR + 0x10000D)
+#define MCFGPIO_PODR_SDRAM (MCF_IPSBAR + 0x10000E)
+#define MCFGPIO_PODR_TIMERH (MCF_IPSBAR + 0x10000F)
+#define MCFGPIO_PODR_TIMERL (MCF_IPSBAR + 0x100010)
+#define MCFGPIO_PODR_UARTL (MCF_IPSBAR + 0x100011)
+#define MCFGPIO_PODR_FEC1H (MCF_IPSBAR + 0x100012)
+#define MCFGPIO_PODR_FEC1L (MCF_IPSBAR + 0x100013)
+#define MCFGPIO_PODR_BS (MCF_IPSBAR + 0x100014)
+#define MCFGPIO_PODR_IRQ (MCF_IPSBAR + 0x100015)
+#define MCFGPIO_PODR_USBH (MCF_IPSBAR + 0x100016)
+#define MCFGPIO_PODR_USBL (MCF_IPSBAR + 0x100017)
+#define MCFGPIO_PODR_UARTH (MCF_IPSBAR + 0x100018)
+
+#define MCFGPIO_PDDR_BUSCTL (MCF_IPSBAR + 0x100020)
+#define MCFGPIO_PDDR_ADDR (MCF_IPSBAR + 0x100021)
+#define MCFGPIO_PDDR_CS (MCF_IPSBAR + 0x100024)
+#define MCFGPIO_PDDR_FEC0H (MCF_IPSBAR + 0x100026)
+#define MCFGPIO_PDDR_FEC0L (MCF_IPSBAR + 0x100027)
+#define MCFGPIO_PDDR_FECI2C (MCF_IPSBAR + 0x100028)
+#define MCFGPIO_PDDR_QSPI (MCF_IPSBAR + 0x100029)
+#define MCFGPIO_PDDR_SDRAM (MCF_IPSBAR + 0x10002A)
+#define MCFGPIO_PDDR_TIMERH (MCF_IPSBAR + 0x10002B)
+#define MCFGPIO_PDDR_TIMERL (MCF_IPSBAR + 0x10002C)
+#define MCFGPIO_PDDR_UARTL (MCF_IPSBAR + 0x10002D)
+#define MCFGPIO_PDDR_FEC1H (MCF_IPSBAR + 0x10002E)
+#define MCFGPIO_PDDR_FEC1L (MCF_IPSBAR + 0x10002F)
+#define MCFGPIO_PDDR_BS (MCF_IPSBAR + 0x100030)
+#define MCFGPIO_PDDR_IRQ (MCF_IPSBAR + 0x100031)
+#define MCFGPIO_PDDR_USBH (MCF_IPSBAR + 0x100032)
+#define MCFGPIO_PDDR_USBL (MCF_IPSBAR + 0x100033)
+#define MCFGPIO_PDDR_UARTH (MCF_IPSBAR + 0x100034)
+
+#define MCFGPIO_PPDSDR_BUSCTL (MCF_IPSBAR + 0x10003C)
+#define MCFGPIO_PPDSDR_ADDR (MCF_IPSBAR + 0x10003D)
+#define MCFGPIO_PPDSDR_CS (MCF_IPSBAR + 0x100040)
+#define MCFGPIO_PPDSDR_FEC0H (MCF_IPSBAR + 0x100042)
+#define MCFGPIO_PPDSDR_FEC0L (MCF_IPSBAR + 0x100043)
+#define MCFGPIO_PPDSDR_FECI2C (MCF_IPSBAR + 0x100044)
+#define MCFGPIO_PPDSDR_QSPI (MCF_IPSBAR + 0x100045)
+#define MCFGPIO_PPDSDR_SDRAM (MCF_IPSBAR + 0x100046)
+#define MCFGPIO_PPDSDR_TIMERH (MCF_IPSBAR + 0x100047)
+#define MCFGPIO_PPDSDR_TIMERL (MCF_IPSBAR + 0x100048)
+#define MCFGPIO_PPDSDR_UARTL (MCF_IPSBAR + 0x100049)
+#define MCFGPIO_PPDSDR_FEC1H (MCF_IPSBAR + 0x10004A)
+#define MCFGPIO_PPDSDR_FEC1L (MCF_IPSBAR + 0x10004B)
+#define MCFGPIO_PPDSDR_BS (MCF_IPSBAR + 0x10004C)
+#define MCFGPIO_PPDSDR_IRQ (MCF_IPSBAR + 0x10004D)
+#define MCFGPIO_PPDSDR_USBH (MCF_IPSBAR + 0x10004E)
+#define MCFGPIO_PPDSDR_USBL (MCF_IPSBAR + 0x10004F)
+#define MCFGPIO_PPDSDR_UARTH (MCF_IPSBAR + 0x100050)
+
+#define MCFGPIO_PCLRR_BUSCTL (MCF_IPSBAR + 0x100058)
+#define MCFGPIO_PCLRR_ADDR (MCF_IPSBAR + 0x100059)
+#define MCFGPIO_PCLRR_CS (MCF_IPSBAR + 0x10005C)
+#define MCFGPIO_PCLRR_FEC0H (MCF_IPSBAR + 0x10005E)
+#define MCFGPIO_PCLRR_FEC0L (MCF_IPSBAR + 0x10005F)
+#define MCFGPIO_PCLRR_FECI2C (MCF_IPSBAR + 0x100060)
+#define MCFGPIO_PCLRR_QSPI (MCF_IPSBAR + 0x100061)
+#define MCFGPIO_PCLRR_SDRAM (MCF_IPSBAR + 0x100062)
+#define MCFGPIO_PCLRR_TIMERH (MCF_IPSBAR + 0x100063)
+#define MCFGPIO_PCLRR_TIMERL (MCF_IPSBAR + 0x100064)
+#define MCFGPIO_PCLRR_UARTL (MCF_IPSBAR + 0x100065)
+#define MCFGPIO_PCLRR_FEC1H (MCF_IPSBAR + 0x100066)
+#define MCFGPIO_PCLRR_FEC1L (MCF_IPSBAR + 0x100067)
+#define MCFGPIO_PCLRR_BS (MCF_IPSBAR + 0x100068)
+#define MCFGPIO_PCLRR_IRQ (MCF_IPSBAR + 0x100069)
+#define MCFGPIO_PCLRR_USBH (MCF_IPSBAR + 0x10006A)
+#define MCFGPIO_PCLRR_USBL (MCF_IPSBAR + 0x10006B)
+#define MCFGPIO_PCLRR_UARTH (MCF_IPSBAR + 0x10006C)
+
+
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PODR MCFGPIO_PODR_BUSCTL
+#define MCFGPIO_PDDR MCFGPIO_PDDR_BUSCTL
+#define MCFGPIO_PPDR MCFGPIO_PPDSDR_BUSCTL
+#define MCFGPIO_SETR MCFGPIO_PPDSDR_BUSCTL
+#define MCFGPIO_CLRR MCFGPIO_PCLRR_BUSCTL
+
+#define MCFGPIO_PIN_MAX 148
+#define MCFGPIO_IRQ_MAX 8
+#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE
+#endif
+
+/*
+ * EPort
+ */
+
+#define MCFEPORT_EPDDR (MCF_IPSBAR + 0x130002)
+#define MCFEPORT_EPDR (MCF_IPSBAR + 0x130004)
+#define MCFEPORT_EPPDR (MCF_IPSBAR + 0x130005)
+
+
/*
* GPIO pins setups to enable the UARTs.
*/
diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h
index d79c49f8134..e2ad1f42b65 100644
--- a/arch/m68k/include/asm/m528xsim.h
+++ b/arch/m68k/include/asm/m528xsim.h
@@ -41,6 +41,157 @@
#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */
/*
+ * GPIO registers
+ */
+#define MCFGPIO_PORTA (MCF_IPSBAR + 0x00100000)
+#define MCFGPIO_PORTB (MCF_IPSBAR + 0x00100001)
+#define MCFGPIO_PORTC (MCF_IPSBAR + 0x00100002)
+#define MCFGPIO_PORTD (MCF_IPSBAR + 0x00100003)
+#define MCFGPIO_PORTE (MCF_IPSBAR + 0x00100004)
+#define MCFGPIO_PORTF (MCF_IPSBAR + 0x00100005)
+#define MCFGPIO_PORTG (MCF_IPSBAR + 0x00100006)
+#define MCFGPIO_PORTH (MCF_IPSBAR + 0x00100007)
+#define MCFGPIO_PORTJ (MCF_IPSBAR + 0x00100008)
+#define MCFGPIO_PORTDD (MCF_IPSBAR + 0x00100009)
+#define MCFGPIO_PORTEH (MCF_IPSBAR + 0x0010000A)
+#define MCFGPIO_PORTEL (MCF_IPSBAR + 0x0010000B)
+#define MCFGPIO_PORTAS (MCF_IPSBAR + 0x0010000C)
+#define MCFGPIO_PORTQS (MCF_IPSBAR + 0x0010000D)
+#define MCFGPIO_PORTSD (MCF_IPSBAR + 0x0010000E)
+#define MCFGPIO_PORTTC (MCF_IPSBAR + 0x0010000F)
+#define MCFGPIO_PORTTD (MCF_IPSBAR + 0x00100010)
+#define MCFGPIO_PORTUA (MCF_IPSBAR + 0x00100011)
+
+#define MCFGPIO_DDRA (MCF_IPSBAR + 0x00100014)
+#define MCFGPIO_DDRB (MCF_IPSBAR + 0x00100015)
+#define MCFGPIO_DDRC (MCF_IPSBAR + 0x00100016)
+#define MCFGPIO_DDRD (MCF_IPSBAR + 0x00100017)
+#define MCFGPIO_DDRE (MCF_IPSBAR + 0x00100018)
+#define MCFGPIO_DDRF (MCF_IPSBAR + 0x00100019)
+#define MCFGPIO_DDRG (MCF_IPSBAR + 0x0010001A)
+#define MCFGPIO_DDRH (MCF_IPSBAR + 0x0010001B)
+#define MCFGPIO_DDRJ (MCF_IPSBAR + 0x0010001C)
+#define MCFGPIO_DDRDD (MCF_IPSBAR + 0x0010001D)
+#define MCFGPIO_DDREH (MCF_IPSBAR + 0x0010001E)
+#define MCFGPIO_DDREL (MCF_IPSBAR + 0x0010001F)
+#define MCFGPIO_DDRAS (MCF_IPSBAR + 0x00100020)
+#define MCFGPIO_DDRQS (MCF_IPSBAR + 0x00100021)
+#define MCFGPIO_DDRSD (MCF_IPSBAR + 0x00100022)
+#define MCFGPIO_DDRTC (MCF_IPSBAR + 0x00100023)
+#define MCFGPIO_DDRTD (MCF_IPSBAR + 0x00100024)
+#define MCFGPIO_DDRUA (MCF_IPSBAR + 0x00100025)
+
+#define MCFGPIO_PORTAP (MCF_IPSBAR + 0x00100028)
+#define MCFGPIO_PORTBP (MCF_IPSBAR + 0x00100029)
+#define MCFGPIO_PORTCP (MCF_IPSBAR + 0x0010002A)
+#define MCFGPIO_PORTDP (MCF_IPSBAR + 0x0010002B)
+#define MCFGPIO_PORTEP (MCF_IPSBAR + 0x0010002C)
+#define MCFGPIO_PORTFP (MCF_IPSBAR + 0x0010002D)
+#define MCFGPIO_PORTGP (MCF_IPSBAR + 0x0010002E)
+#define MCFGPIO_PORTHP (MCF_IPSBAR + 0x0010002F)
+#define MCFGPIO_PORTJP (MCF_IPSBAR + 0x00100030)
+#define MCFGPIO_PORTDDP (MCF_IPSBAR + 0x00100031)
+#define MCFGPIO_PORTEHP (MCF_IPSBAR + 0x00100032)
+#define MCFGPIO_PORTELP (MCF_IPSBAR + 0x00100033)
+#define MCFGPIO_PORTASP (MCF_IPSBAR + 0x00100034)
+#define MCFGPIO_PORTQSP (MCF_IPSBAR + 0x00100035)
+#define MCFGPIO_PORTSDP (MCF_IPSBAR + 0x00100036)
+#define MCFGPIO_PORTTCP (MCF_IPSBAR + 0x00100037)
+#define MCFGPIO_PORTTDP (MCF_IPSBAR + 0x00100038)
+#define MCFGPIO_PORTUAP (MCF_IPSBAR + 0x00100039)
+
+#define MCFGPIO_SETA (MCF_IPSBAR + 0x00100028)
+#define MCFGPIO_SETB (MCF_IPSBAR + 0x00100029)
+#define MCFGPIO_SETC (MCF_IPSBAR + 0x0010002A)
+#define MCFGPIO_SETD (MCF_IPSBAR + 0x0010002B)
+#define MCFGPIO_SETE (MCF_IPSBAR + 0x0010002C)
+#define MCFGPIO_SETF (MCF_IPSBAR + 0x0010002D)
+#define MCFGPIO_SETG (MCF_IPSBAR + 0x0010002E)
+#define MCFGPIO_SETH (MCF_IPSBAR + 0x0010002F)
+#define MCFGPIO_SETJ (MCF_IPSBAR + 0x00100030)
+#define MCFGPIO_SETDD (MCF_IPSBAR + 0x00100031)
+#define MCFGPIO_SETEH (MCF_IPSBAR + 0x00100032)
+#define MCFGPIO_SETEL (MCF_IPSBAR + 0x00100033)
+#define MCFGPIO_SETAS (MCF_IPSBAR + 0x00100034)
+#define MCFGPIO_SETQS (MCF_IPSBAR + 0x00100035)
+#define MCFGPIO_SETSD (MCF_IPSBAR + 0x00100036)
+#define MCFGPIO_SETTC (MCF_IPSBAR + 0x00100037)
+#define MCFGPIO_SETTD (MCF_IPSBAR + 0x00100038)
+#define MCFGPIO_SETUA (MCF_IPSBAR + 0x00100039)
+
+#define MCFGPIO_CLRA (MCF_IPSBAR + 0x0010003C)
+#define MCFGPIO_CLRB (MCF_IPSBAR + 0x0010003D)
+#define MCFGPIO_CLRC (MCF_IPSBAR + 0x0010003E)
+#define MCFGPIO_CLRD (MCF_IPSBAR + 0x0010003F)
+#define MCFGPIO_CLRE (MCF_IPSBAR + 0x00100040)
+#define MCFGPIO_CLRF (MCF_IPSBAR + 0x00100041)
+#define MCFGPIO_CLRG (MCF_IPSBAR + 0x00100042)
+#define MCFGPIO_CLRH (MCF_IPSBAR + 0x00100043)
+#define MCFGPIO_CLRJ (MCF_IPSBAR + 0x00100044)
+#define MCFGPIO_CLRDD (MCF_IPSBAR + 0x00100045)
+#define MCFGPIO_CLREH (MCF_IPSBAR + 0x00100046)
+#define MCFGPIO_CLREL (MCF_IPSBAR + 0x00100047)
+#define MCFGPIO_CLRAS (MCF_IPSBAR + 0x00100048)
+#define MCFGPIO_CLRQS (MCF_IPSBAR + 0x00100049)
+#define MCFGPIO_CLRSD (MCF_IPSBAR + 0x0010004A)
+#define MCFGPIO_CLRTC (MCF_IPSBAR + 0x0010004B)
+#define MCFGPIO_CLRTD (MCF_IPSBAR + 0x0010004C)
+#define MCFGPIO_CLRUA (MCF_IPSBAR + 0x0010004D)
+
+#define MCFGPIO_PBCDPAR (MCF_IPSBAR + 0x00100050)
+#define MCFGPIO_PFPAR (MCF_IPSBAR + 0x00100051)
+#define MCFGPIO_PEPAR (MCF_IPSBAR + 0x00100052)
+#define MCFGPIO_PJPAR (MCF_IPSBAR + 0x00100054)
+#define MCFGPIO_PSDPAR (MCF_IPSBAR + 0x00100055)
+#define MCFGPIO_PASPAR (MCF_IPSBAR + 0x00100056)
+#define MCFGPIO_PEHLPAR (MCF_IPSBAR + 0x00100058)
+#define MCFGPIO_PQSPAR (MCF_IPSBAR + 0x00100059)
+#define MCFGPIO_PTCPAR (MCF_IPSBAR + 0x0010005A)
+#define MCFGPIO_PTDPAR (MCF_IPSBAR + 0x0010005B)
+#define MCFGPIO_PUAPAR (MCF_IPSBAR + 0x0010005C)
+
+/*
+ * Edge Port registers
+ */
+#define MCFEPORT_EPPAR (MCF_IPSBAR + 0x00130000)
+#define MCFEPORT_EPDDR (MCF_IPSBAR + 0x00130002)
+#define MCFEPORT_EPIER (MCF_IPSBAR + 0x00130003)
+#define MCFEPORT_EPDR (MCF_IPSBAR + 0x00130004)
+#define MCFEPORT_EPPDR (MCF_IPSBAR + 0x00130005)
+#define MCFEPORT_EPFR (MCF_IPSBAR + 0x00130006)
+
+/*
+ * Queued ADC registers
+ */
+#define MCFQADC_PORTQA (MCF_IPSBAR + 0x00190006)
+#define MCFQADC_PORTQB (MCF_IPSBAR + 0x00190007)
+#define MCFQADC_DDRQA (MCF_IPSBAR + 0x00190008)
+#define MCFQADC_DDRQB (MCF_IPSBAR + 0x00190009)
+
+/*
+ * General Purpose Timers registers
+ */
+#define MCFGPTA_GPTPORT (MCF_IPSBAR + 0x001A001D)
+#define MCFGPTA_GPTDDR (MCF_IPSBAR + 0x001A001E)
+#define MCFGPTB_GPTPORT (MCF_IPSBAR + 0x001B001D)
+#define MCFGPTB_GPTDDR (MCF_IPSBAR + 0x001B001E)
+/*
+ *
+ * definitions for generic gpio support
+ *
+ */
+#define MCFGPIO_PODR MCFGPIO_PORTA /* port output data */
+#define MCFGPIO_PDDR MCFGPIO_DDRA /* port data direction */
+#define MCFGPIO_PPDR MCFGPIO_PORTAP /* port pin data */
+#define MCFGPIO_SETR MCFGPIO_SETA /* set output */
+#define MCFGPIO_CLRR MCFGPIO_CLRA /* clr output */
+
+#define MCFGPIO_IRQ_MAX 8
+#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE
+#define MCFGPIO_PIN_MAX 180
+
+
+/*
* Derek Cheung - 6 Feb 2005
* add I2C and QSPI register definition using Freescale's MCF5282
*/
diff --git a/arch/m68k/include/asm/m5307sim.h b/arch/m68k/include/asm/m5307sim.h
index 5886728409c..c6830e5b54c 100644
--- a/arch/m68k/include/asm/m5307sim.h
+++ b/arch/m68k/include/asm/m5307sim.h
@@ -90,8 +90,15 @@
#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */
#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */
-#define MCFSIM_PADDR 0x244 /* Parallel Direction (r/w) */
-#define MCFSIM_PADAT 0x248 /* Parallel Data (r/w) */
+#define MCFSIM_PADDR (MCF_MBAR + 0x244)
+#define MCFSIM_PADAT (MCF_MBAR + 0x248)
+
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PIN_MAX 16
+#define MCFGPIO_IRQ_MAX -1
+#define MCFGPIO_IRQ_VECBASE -1
/* Definition offset address for CS2-7 -- old mask 5307 */
@@ -117,22 +124,6 @@
#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */
#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */
-#if defined(CONFIG_M5307)
-#define MCFSIM_IMR_MASKALL 0x3fffe /* All SIM intr sources */
-#endif
-
-/*
- * Macro to set IMR register. It is 32 bits on the 5307.
- */
-#define mcf_getimr() \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
-
-#define mcf_setimr(imr) \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
-
-#define mcf_getipr() \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
-
/*
* Some symbol defines for the Parallel Port Pin Assignment Register
@@ -149,6 +140,11 @@
#define IRQ3_LEVEL6 0x40
#define IRQ1_LEVEL2 0x20
+/*
+ * Define system peripheral IRQ usage.
+ */
+#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */
+#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
/*
* Define the Cache register flags.
diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h
index eb7fd444894..36bf15aec9a 100644
--- a/arch/m68k/include/asm/m532xsim.h
+++ b/arch/m68k/include/asm/m532xsim.h
@@ -56,47 +56,21 @@
#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */
-#define MCFSIM_IMR_MASKALL 0xFFFFFFFF /* All SIM intr sources */
-
-#define MCFSIM_IMR_SIMR0 0xFC04801C
-#define MCFSIM_IMR_SIMR1 0xFC04C01C
-#define MCFSIM_IMR_CIMR0 0xFC04801D
-#define MCFSIM_IMR_CIMR1 0xFC04C01D
+#define MCFINTC0_SIMR 0xFC04801C
+#define MCFINTC0_CIMR 0xFC04801D
+#define MCFINTC0_ICR0 0xFC048040
+#define MCFINTC1_SIMR 0xFC04C01C
+#define MCFINTC1_CIMR 0xFC04C01D
+#define MCFINTC1_ICR0 0xFC04C040
#define MCFSIM_ICR_TIMER1 (0xFC048040+32)
#define MCFSIM_ICR_TIMER2 (0xFC048040+33)
-
/*
- * Macro to set IMR register. It is 32 bits on the 5307.
+ * Define system peripheral IRQ usage.
*/
-#define mcf_getimr() \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
-
-#define mcf_setimr(imr) \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
-
-#define mcf_getipr() \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
-
-#define mcf_getiprl() \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRL))
-
-#define mcf_getiprh() \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRH))
-
-
-#define mcf_enable_irq0(irq) \
- *((volatile unsigned char*) (MCFSIM_IMR_CIMR0)) = (irq);
-
-#define mcf_enable_irq1(irq) \
- *((volatile unsigned char*) (MCFSIM_IMR_CIMR1)) = (irq);
-
-#define mcf_disable_irq0(irq) \
- *((volatile unsigned char*) (MCFSIM_IMR_SIMR0)) = (irq);
-
-#define mcf_disable_irq1(irq) \
- *((volatile unsigned char*) (MCFSIM_IMR_SIMR1)) = (irq);
+#define MCF_IRQ_TIMER (64 + 32) /* Timer0 */
+#define MCF_IRQ_PROFILER (64 + 33) /* Timer1 */
/*
* Define the Cache register flags.
@@ -422,70 +396,70 @@
*********************************************************************/
/* Register read/write macros */
-#define MCF_GPIO_PODR_FECH MCF_REG08(0xFC0A4000)
-#define MCF_GPIO_PODR_FECL MCF_REG08(0xFC0A4001)
-#define MCF_GPIO_PODR_SSI MCF_REG08(0xFC0A4002)
-#define MCF_GPIO_PODR_BUSCTL MCF_REG08(0xFC0A4003)
-#define MCF_GPIO_PODR_BE MCF_REG08(0xFC0A4004)
-#define MCF_GPIO_PODR_CS MCF_REG08(0xFC0A4005)
-#define MCF_GPIO_PODR_PWM MCF_REG08(0xFC0A4006)
-#define MCF_GPIO_PODR_FECI2C MCF_REG08(0xFC0A4007)
-#define MCF_GPIO_PODR_UART MCF_REG08(0xFC0A4009)
-#define MCF_GPIO_PODR_QSPI MCF_REG08(0xFC0A400A)
-#define MCF_GPIO_PODR_TIMER MCF_REG08(0xFC0A400B)
-#define MCF_GPIO_PODR_LCDDATAH MCF_REG08(0xFC0A400D)
-#define MCF_GPIO_PODR_LCDDATAM MCF_REG08(0xFC0A400E)
-#define MCF_GPIO_PODR_LCDDATAL MCF_REG08(0xFC0A400F)
-#define MCF_GPIO_PODR_LCDCTLH MCF_REG08(0xFC0A4010)
-#define MCF_GPIO_PODR_LCDCTLL MCF_REG08(0xFC0A4011)
-#define MCF_GPIO_PDDR_FECH MCF_REG08(0xFC0A4014)
-#define MCF_GPIO_PDDR_FECL MCF_REG08(0xFC0A4015)
-#define MCF_GPIO_PDDR_SSI MCF_REG08(0xFC0A4016)
-#define MCF_GPIO_PDDR_BUSCTL MCF_REG08(0xFC0A4017)
-#define MCF_GPIO_PDDR_BE MCF_REG08(0xFC0A4018)
-#define MCF_GPIO_PDDR_CS MCF_REG08(0xFC0A4019)
-#define MCF_GPIO_PDDR_PWM MCF_REG08(0xFC0A401A)
-#define MCF_GPIO_PDDR_FECI2C MCF_REG08(0xFC0A401B)
-#define MCF_GPIO_PDDR_UART MCF_REG08(0xFC0A401C)
-#define MCF_GPIO_PDDR_QSPI MCF_REG08(0xFC0A401E)
-#define MCF_GPIO_PDDR_TIMER MCF_REG08(0xFC0A401F)
-#define MCF_GPIO_PDDR_LCDDATAH MCF_REG08(0xFC0A4021)
-#define MCF_GPIO_PDDR_LCDDATAM MCF_REG08(0xFC0A4022)
-#define MCF_GPIO_PDDR_LCDDATAL MCF_REG08(0xFC0A4023)
-#define MCF_GPIO_PDDR_LCDCTLH MCF_REG08(0xFC0A4024)
-#define MCF_GPIO_PDDR_LCDCTLL MCF_REG08(0xFC0A4025)
-#define MCF_GPIO_PPDSDR_FECH MCF_REG08(0xFC0A4028)
-#define MCF_GPIO_PPDSDR_FECL MCF_REG08(0xFC0A4029)
-#define MCF_GPIO_PPDSDR_SSI MCF_REG08(0xFC0A402A)
-#define MCF_GPIO_PPDSDR_BUSCTL MCF_REG08(0xFC0A402B)
-#define MCF_GPIO_PPDSDR_BE MCF_REG08(0xFC0A402C)
-#define MCF_GPIO_PPDSDR_CS MCF_REG08(0xFC0A402D)
-#define MCF_GPIO_PPDSDR_PWM MCF_REG08(0xFC0A402E)
-#define MCF_GPIO_PPDSDR_FECI2C MCF_REG08(0xFC0A402F)
-#define MCF_GPIO_PPDSDR_UART MCF_REG08(0xFC0A4031)
-#define MCF_GPIO_PPDSDR_QSPI MCF_REG08(0xFC0A4032)
-#define MCF_GPIO_PPDSDR_TIMER MCF_REG08(0xFC0A4033)
-#define MCF_GPIO_PPDSDR_LCDDATAH MCF_REG08(0xFC0A4035)
-#define MCF_GPIO_PPDSDR_LCDDATAM MCF_REG08(0xFC0A4036)
-#define MCF_GPIO_PPDSDR_LCDDATAL MCF_REG08(0xFC0A4037)
-#define MCF_GPIO_PPDSDR_LCDCTLH MCF_REG08(0xFC0A4038)
-#define MCF_GPIO_PPDSDR_LCDCTLL MCF_REG08(0xFC0A4039)
-#define MCF_GPIO_PCLRR_FECH MCF_REG08(0xFC0A403C)
-#define MCF_GPIO_PCLRR_FECL MCF_REG08(0xFC0A403D)
-#define MCF_GPIO_PCLRR_SSI MCF_REG08(0xFC0A403E)
-#define MCF_GPIO_PCLRR_BUSCTL MCF_REG08(0xFC0A403F)
-#define MCF_GPIO_PCLRR_BE MCF_REG08(0xFC0A4040)
-#define MCF_GPIO_PCLRR_CS MCF_REG08(0xFC0A4041)
-#define MCF_GPIO_PCLRR_PWM MCF_REG08(0xFC0A4042)
-#define MCF_GPIO_PCLRR_FECI2C MCF_REG08(0xFC0A4043)
-#define MCF_GPIO_PCLRR_UART MCF_REG08(0xFC0A4045)
-#define MCF_GPIO_PCLRR_QSPI MCF_REG08(0xFC0A4046)
-#define MCF_GPIO_PCLRR_TIMER MCF_REG08(0xFC0A4047)
-#define MCF_GPIO_PCLRR_LCDDATAH MCF_REG08(0xFC0A4049)
-#define MCF_GPIO_PCLRR_LCDDATAM MCF_REG08(0xFC0A404A)
-#define MCF_GPIO_PCLRR_LCDDATAL MCF_REG08(0xFC0A404B)
-#define MCF_GPIO_PCLRR_LCDCTLH MCF_REG08(0xFC0A404C)
-#define MCF_GPIO_PCLRR_LCDCTLL MCF_REG08(0xFC0A404D)
+#define MCFGPIO_PODR_FECH (0xFC0A4000)
+#define MCFGPIO_PODR_FECL (0xFC0A4001)
+#define MCFGPIO_PODR_SSI (0xFC0A4002)
+#define MCFGPIO_PODR_BUSCTL (0xFC0A4003)
+#define MCFGPIO_PODR_BE (0xFC0A4004)
+#define MCFGPIO_PODR_CS (0xFC0A4005)
+#define MCFGPIO_PODR_PWM (0xFC0A4006)
+#define MCFGPIO_PODR_FECI2C (0xFC0A4007)
+#define MCFGPIO_PODR_UART (0xFC0A4009)
+#define MCFGPIO_PODR_QSPI (0xFC0A400A)
+#define MCFGPIO_PODR_TIMER (0xFC0A400B)
+#define MCFGPIO_PODR_LCDDATAH (0xFC0A400D)
+#define MCFGPIO_PODR_LCDDATAM (0xFC0A400E)
+#define MCFGPIO_PODR_LCDDATAL (0xFC0A400F)
+#define MCFGPIO_PODR_LCDCTLH (0xFC0A4010)
+#define MCFGPIO_PODR_LCDCTLL (0xFC0A4011)
+#define MCFGPIO_PDDR_FECH (0xFC0A4014)
+#define MCFGPIO_PDDR_FECL (0xFC0A4015)
+#define MCFGPIO_PDDR_SSI (0xFC0A4016)
+#define MCFGPIO_PDDR_BUSCTL (0xFC0A4017)
+#define MCFGPIO_PDDR_BE (0xFC0A4018)
+#define MCFGPIO_PDDR_CS (0xFC0A4019)
+#define MCFGPIO_PDDR_PWM (0xFC0A401A)
+#define MCFGPIO_PDDR_FECI2C (0xFC0A401B)
+#define MCFGPIO_PDDR_UART (0xFC0A401C)
+#define MCFGPIO_PDDR_QSPI (0xFC0A401E)
+#define MCFGPIO_PDDR_TIMER (0xFC0A401F)
+#define MCFGPIO_PDDR_LCDDATAH (0xFC0A4021)
+#define MCFGPIO_PDDR_LCDDATAM (0xFC0A4022)
+#define MCFGPIO_PDDR_LCDDATAL (0xFC0A4023)
+#define MCFGPIO_PDDR_LCDCTLH (0xFC0A4024)
+#define MCFGPIO_PDDR_LCDCTLL (0xFC0A4025)
+#define MCFGPIO_PPDSDR_FECH (0xFC0A4028)
+#define MCFGPIO_PPDSDR_FECL (0xFC0A4029)
+#define MCFGPIO_PPDSDR_SSI (0xFC0A402A)
+#define MCFGPIO_PPDSDR_BUSCTL (0xFC0A402B)
+#define MCFGPIO_PPDSDR_BE (0xFC0A402C)
+#define MCFGPIO_PPDSDR_CS (0xFC0A402D)
+#define MCFGPIO_PPDSDR_PWM (0xFC0A402E)
+#define MCFGPIO_PPDSDR_FECI2C (0xFC0A402F)
+#define MCFGPIO_PPDSDR_UART (0xFC0A4031)
+#define MCFGPIO_PPDSDR_QSPI (0xFC0A4032)
+#define MCFGPIO_PPDSDR_TIMER (0xFC0A4033)
+#define MCFGPIO_PPDSDR_LCDDATAH (0xFC0A4035)
+#define MCFGPIO_PPDSDR_LCDDATAM (0xFC0A4036)
+#define MCFGPIO_PPDSDR_LCDDATAL (0xFC0A4037)
+#define MCFGPIO_PPDSDR_LCDCTLH (0xFC0A4038)
+#define MCFGPIO_PPDSDR_LCDCTLL (0xFC0A4039)
+#define MCFGPIO_PCLRR_FECH (0xFC0A403C)
+#define MCFGPIO_PCLRR_FECL (0xFC0A403D)
+#define MCFGPIO_PCLRR_SSI (0xFC0A403E)
+#define MCFGPIO_PCLRR_BUSCTL (0xFC0A403F)
+#define MCFGPIO_PCLRR_BE (0xFC0A4040)
+#define MCFGPIO_PCLRR_CS (0xFC0A4041)
+#define MCFGPIO_PCLRR_PWM (0xFC0A4042)
+#define MCFGPIO_PCLRR_FECI2C (0xFC0A4043)
+#define MCFGPIO_PCLRR_UART (0xFC0A4045)
+#define MCFGPIO_PCLRR_QSPI (0xFC0A4046)
+#define MCFGPIO_PCLRR_TIMER (0xFC0A4047)
+#define MCFGPIO_PCLRR_LCDDATAH (0xFC0A4049)
+#define MCFGPIO_PCLRR_LCDDATAM (0xFC0A404A)
+#define MCFGPIO_PCLRR_LCDDATAL (0xFC0A404B)
+#define MCFGPIO_PCLRR_LCDCTLH (0xFC0A404C)
+#define MCFGPIO_PCLRR_LCDCTLL (0xFC0A404D)
#define MCF_GPIO_PAR_FEC MCF_REG08(0xFC0A4050)
#define MCF_GPIO_PAR_PWM MCF_REG08(0xFC0A4051)
#define MCF_GPIO_PAR_BUSCTL MCF_REG08(0xFC0A4052)
@@ -1187,6 +1161,20 @@
/* Bit definitions and macros for MCF_GPIO_DSCR_IRQ */
#define MCF_GPIO_DSCR_IRQ_IRQ_DSE(x) (((x)&0x03)<<0)
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PODR MCFGPIO_PODR_FECH
+#define MCFGPIO_PDDR MCFGPIO_PDDR_FECH
+#define MCFGPIO_PPDR MCFGPIO_PPDSDR_FECH
+#define MCFGPIO_SETR MCFGPIO_PPDSDR_FECH
+#define MCFGPIO_CLRR MCFGPIO_PCLRR_FECH
+
+#define MCFGPIO_PIN_MAX 136
+#define MCFGPIO_IRQ_MAX 8
+#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE
+
+
/*********************************************************************
*
* Interrupt Controller (INTC)
@@ -2154,12 +2142,12 @@
*********************************************************************/
/* Register read/write macros */
-#define MCF_EPORT_EPPAR MCF_REG16(0xFC094000)
-#define MCF_EPORT_EPDDR MCF_REG08(0xFC094002)
-#define MCF_EPORT_EPIER MCF_REG08(0xFC094003)
-#define MCF_EPORT_EPDR MCF_REG08(0xFC094004)
-#define MCF_EPORT_EPPDR MCF_REG08(0xFC094005)
-#define MCF_EPORT_EPFR MCF_REG08(0xFC094006)
+#define MCFEPORT_EPPAR (0xFC094000)
+#define MCFEPORT_EPDDR (0xFC094002)
+#define MCFEPORT_EPIER (0xFC094003)
+#define MCFEPORT_EPDR (0xFC094004)
+#define MCFEPORT_EPPDR (0xFC094005)
+#define MCFEPORT_EPFR (0xFC094006)
/* Bit definitions and macros for MCF_EPORT_EPPAR */
#define MCF_EPORT_EPPAR_EPPA1(x) (((x)&0x0003)<<2)
diff --git a/arch/m68k/include/asm/m5407sim.h b/arch/m68k/include/asm/m5407sim.h
index cc22c4a5300..c399abbf953 100644
--- a/arch/m68k/include/asm/m5407sim.h
+++ b/arch/m68k/include/asm/m5407sim.h
@@ -73,9 +73,15 @@
#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */
#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */
-#define MCFSIM_PADDR 0x244 /* Parallel Direction (r/w) */
-#define MCFSIM_PADAT 0x248 /* Parallel Data (r/w) */
+#define MCFSIM_PADDR (MCF_MBAR + 0x244)
+#define MCFSIM_PADAT (MCF_MBAR + 0x248)
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PIN_MAX 16
+#define MCFGPIO_IRQ_MAX -1
+#define MCFGPIO_IRQ_VECBASE -1
/*
* Some symbol defines for the above...
@@ -91,19 +97,6 @@
#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */
/*
- * Macro to set IMR register. It is 32 bits on the 5407.
- */
-#define mcf_getimr() \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
-
-#define mcf_setimr(imr) \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
-
-#define mcf_getipr() \
- *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
-
-
-/*
* Some symbol defines for the Parallel Port Pin Assignment Register
*/
#define MCFSIM_PAR_DREQ0 0x40 /* Set to select DREQ0 input */
@@ -118,6 +111,11 @@
#define IRQ3_LEVEL6 0x40
#define IRQ1_LEVEL2 0x20
+/*
+ * Define system peripheral IRQ usage.
+ */
+#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */
+#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
/*
* Define the Cache register flags.
diff --git a/arch/m68k/include/asm/mcfgpio.h b/arch/m68k/include/asm/mcfgpio.h
new file mode 100644
index 00000000000..ee5e4ccce89
--- /dev/null
+++ b/arch/m68k/include/asm/mcfgpio.h
@@ -0,0 +1,40 @@
+/*
+ * Coldfire generic GPIO support.
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef mcfgpio_h
+#define mcfgpio_h
+
+#include <linux/io.h>
+#include <asm-generic/gpio.h>
+
+struct mcf_gpio_chip {
+ struct gpio_chip gpio_chip;
+ void __iomem *pddr;
+ void __iomem *podr;
+ void __iomem *ppdr;
+ void __iomem *setr;
+ void __iomem *clrr;
+ const u8 *gpio_to_pinmux;
+};
+
+int mcf_gpio_direction_input(struct gpio_chip *, unsigned);
+int mcf_gpio_get_value(struct gpio_chip *, unsigned);
+int mcf_gpio_direction_output(struct gpio_chip *, unsigned, int);
+void mcf_gpio_set_value(struct gpio_chip *, unsigned, int);
+void mcf_gpio_set_value_fast(struct gpio_chip *, unsigned, int);
+int mcf_gpio_request(struct gpio_chip *, unsigned);
+void mcf_gpio_free(struct gpio_chip *, unsigned);
+
+#endif
diff --git a/arch/m68k/include/asm/mcfintc.h b/arch/m68k/include/asm/mcfintc.h
new file mode 100644
index 00000000000..4183320a381
--- /dev/null
+++ b/arch/m68k/include/asm/mcfintc.h
@@ -0,0 +1,89 @@
+/****************************************************************************/
+
+/*
+ * mcfintc.h -- support definitions for the simple ColdFire
+ * Interrupt Controller
+ *
+ * (C) Copyright 2009, Greg Ungerer <gerg@uclinux.org>
+ */
+
+/****************************************************************************/
+#ifndef mcfintc_h
+#define mcfintc_h
+/****************************************************************************/
+
+/*
+ * Most of the older ColdFire parts use the same simple interrupt
+ * controller. This is currently used on the 5206, 5206e, 5249, 5307
+ * and 5407 parts.
+ *
+ * The builtin peripherals are masked through dedicated bits in the
+ * Interrupt Mask register (IMR) - and this is not indexed (or in any way
+ * related to) the actual interrupt number they use. So knowing the IRQ
+ * number doesn't explicitly map to a certain internal device for
+ * interrupt control purposes.
+ */
+
+/*
+ * Bit definitions for the ICR family of registers.
+ */
+#define MCFSIM_ICR_AUTOVEC 0x80 /* Auto-vectored intr */
+#define MCFSIM_ICR_LEVEL0 0x00 /* Level 0 intr */
+#define MCFSIM_ICR_LEVEL1 0x04 /* Level 1 intr */
+#define MCFSIM_ICR_LEVEL2 0x08 /* Level 2 intr */
+#define MCFSIM_ICR_LEVEL3 0x0c /* Level 3 intr */
+#define MCFSIM_ICR_LEVEL4 0x10 /* Level 4 intr */
+#define MCFSIM_ICR_LEVEL5 0x14 /* Level 5 intr */
+#define MCFSIM_ICR_LEVEL6 0x18 /* Level 6 intr */
+#define MCFSIM_ICR_LEVEL7 0x1c /* Level 7 intr */
+
+#define MCFSIM_ICR_PRI0 0x00 /* Priority 0 intr */
+#define MCFSIM_ICR_PRI1 0x01 /* Priority 1 intr */
+#define MCFSIM_ICR_PRI2 0x02 /* Priority 2 intr */
+#define MCFSIM_ICR_PRI3 0x03 /* Priority 3 intr */
+
+/*
+ * IMR bit position definitions. Not all ColdFire parts with this interrupt
+ * controller actually support all of these interrupt sources. But the bit
+ * numbers are the same in all cores.
+ */
+#define MCFINTC_EINT1 1 /* External int #1 */
+#define MCFINTC_EINT2 2 /* External int #2 */
+#define MCFINTC_EINT3 3 /* External int #3 */
+#define MCFINTC_EINT4 4 /* External int #4 */
+#define MCFINTC_EINT5 5 /* External int #5 */
+#define MCFINTC_EINT6 6 /* External int #6 */
+#define MCFINTC_EINT7 7 /* External int #7 */
+#define MCFINTC_SWT 8 /* Software Watchdog */
+#define MCFINTC_TIMER1 9
+#define MCFINTC_TIMER2 10
+#define MCFINTC_I2C 11 /* I2C / MBUS */
+#define MCFINTC_UART0 12
+#define MCFINTC_UART1 13
+#define MCFINTC_DMA0 14
+#define MCFINTC_DMA1 15
+#define MCFINTC_DMA2 16
+#define MCFINTC_DMA3 17
+#define MCFINTC_QSPI 18
+
+#ifndef __ASSEMBLER__
+
+/*
+ * There is no one-is-one correspondance between the interrupt number (irq)
+ * and the bit fields on the mask register. So we create a per-cpu type
+ * mapping of irq to mask bit. The CPU platform code needs to register
+ * its supported irq's at init time, using this function.
+ */
+extern unsigned char mcf_irq2imr[];
+static inline void mcf_mapirq2imr(int irq, int imr)
+{
+ mcf_irq2imr[irq] = imr;
+}
+
+void mcf_autovector(int irq);
+void mcf_setimr(int index);
+void mcf_clrimr(int index);
+#endif
+
+/****************************************************************************/
+#endif /* mcfintc_h */
diff --git a/arch/m68k/include/asm/mcfne.h b/arch/m68k/include/asm/mcfne.h
index 431f63aadd0..bf638be0958 100644
--- a/arch/m68k/include/asm/mcfne.h
+++ b/arch/m68k/include/asm/mcfne.h
@@ -239,87 +239,4 @@ void ne2000_outsw(unsigned int addr, const void *vbuf, unsigned long len)
#endif /* NE2000_OFFOFFSET */
/****************************************************************************/
-
-#ifdef COLDFIRE_NE2000_FUNCS
-
-/*
- * Lastly the interrupt set up code...
- * Minor differences between the different board types.
- */
-
-#if defined(CONFIG_ARN5206)
-void ne2000_irqsetup(int irq)
-{
- volatile unsigned char *icrp;
-
- icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4);
- *icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2;
- mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4);
-}
-#endif
-
-#if defined(CONFIG_M5206eC3)
-void ne2000_irqsetup(int irq)
-{
- volatile unsigned char *icrp;
-
- icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4);
- *icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2 | MCFSIM_ICR_AUTOVEC;
- mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4);
-}
-#endif
-
-#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
-void ne2000_irqsetup(int irq)
-{
- mcf_autovector(irq);
-}
-#endif
-
-#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
-void ne2000_irqsetup(int irq)
-{
- volatile unsigned long *icrp;
- volatile unsigned long *pitr;
-
- /* The NE2000 device uses external IRQ3 */
- icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
- *icrp = (*icrp & 0x77077777) | 0x00d00000;
-
- pitr = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PITR);
- *pitr = *pitr | 0x20000000;
-}
-
-void ne2000_irqack(int irq)
-{
- volatile unsigned long *icrp;
-
- /* The NE2000 device uses external IRQ3 */
- icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
- *icrp = (*icrp & 0x77777777) | 0x00800000;
-}
-#endif
-
-#if defined(CONFIG_M5307) || defined(CONFIG_M5407)
-#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
-
-void ne2000_irqsetup(int irq)
-{
- mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3);
- mcf_autovector(irq);
-}
-
-#else
-
-void ne2000_irqsetup(int irq)
-{
- mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3);
-}
-
-#endif /* ! CONFIG_NETtel || CONFIG_SECUREEDGEMP3 */
-#endif /* CONFIG_M5307 || CONFIG_M5407 */
-
-#endif /* COLDFIRE_NE2000_FUNCS */
-
-/****************************************************************************/
#endif /* mcfne_h */
diff --git a/arch/m68k/include/asm/mcfsim.h b/arch/m68k/include/asm/mcfsim.h
index da3f2ceff3a..9c70a67bf85 100644
--- a/arch/m68k/include/asm/mcfsim.h
+++ b/arch/m68k/include/asm/mcfsim.h
@@ -4,7 +4,7 @@
* mcfsim.h -- ColdFire System Integration Module support.
*
* (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
- * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
+ * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
*/
/****************************************************************************/
@@ -12,19 +12,21 @@
#define mcfsim_h
/****************************************************************************/
-
/*
- * Include 5204, 5206/e, 5235, 5249, 5270/5271, 5272, 5280/5282,
- * 5307 or 5407 specific addresses.
+ * Include the appropriate ColdFire CPU specific System Integration Module
+ * (SIM) definitions.
*/
#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
#include <asm/m5206sim.h>
+#include <asm/mcfintc.h>
#elif defined(CONFIG_M520x)
#include <asm/m520xsim.h>
#elif defined(CONFIG_M523x)
#include <asm/m523xsim.h>
+#include <asm/mcfintc.h>
#elif defined(CONFIG_M5249)
#include <asm/m5249sim.h>
+#include <asm/mcfintc.h>
#elif defined(CONFIG_M527x)
#include <asm/m527xsim.h>
#elif defined(CONFIG_M5272)
@@ -33,94 +35,13 @@
#include <asm/m528xsim.h>
#elif defined(CONFIG_M5307)
#include <asm/m5307sim.h>
+#include <asm/mcfintc.h>
#elif defined(CONFIG_M532x)
#include <asm/m532xsim.h>
#elif defined(CONFIG_M5407)
#include <asm/m5407sim.h>
+#include <asm/mcfintc.h>
#endif
-
-/*
- * Define the base address of the SIM within the MBAR address space.
- */
-#define MCFSIM_BASE 0x0 /* Base address of SIM */
-
-
-/*
- * Bit definitions for the ICR family of registers.
- */
-#define MCFSIM_ICR_AUTOVEC 0x80 /* Auto-vectored intr */
-#define MCFSIM_ICR_LEVEL0 0x00 /* Level 0 intr */
-#define MCFSIM_ICR_LEVEL1 0x04 /* Level 1 intr */
-#define MCFSIM_ICR_LEVEL2 0x08 /* Level 2 intr */
-#define MCFSIM_ICR_LEVEL3 0x0c /* Level 3 intr */
-#define MCFSIM_ICR_LEVEL4 0x10 /* Level 4 intr */
-#define MCFSIM_ICR_LEVEL5 0x14 /* Level 5 intr */
-#define MCFSIM_ICR_LEVEL6 0x18 /* Level 6 intr */
-#define MCFSIM_ICR_LEVEL7 0x1c /* Level 7 intr */
-
-#define MCFSIM_ICR_PRI0 0x00 /* Priority 0 intr */
-#define MCFSIM_ICR_PRI1 0x01 /* Priority 1 intr */
-#define MCFSIM_ICR_PRI2 0x02 /* Priority 2 intr */
-#define MCFSIM_ICR_PRI3 0x03 /* Priority 3 intr */
-
-/*
- * Bit definitions for the Interrupt Mask register (IMR).
- */
-#define MCFSIM_IMR_EINT1 0x0002 /* External intr # 1 */
-#define MCFSIM_IMR_EINT2 0x0004 /* External intr # 2 */
-#define MCFSIM_IMR_EINT3 0x0008 /* External intr # 3 */
-#define MCFSIM_IMR_EINT4 0x0010 /* External intr # 4 */
-#define MCFSIM_IMR_EINT5 0x0020 /* External intr # 5 */
-#define MCFSIM_IMR_EINT6 0x0040 /* External intr # 6 */
-#define MCFSIM_IMR_EINT7 0x0080 /* External intr # 7 */
-
-#define MCFSIM_IMR_SWD 0x0100 /* Software Watchdog intr */
-#define MCFSIM_IMR_TIMER1 0x0200 /* TIMER 1 intr */
-#define MCFSIM_IMR_TIMER2 0x0400 /* TIMER 2 intr */
-#define MCFSIM_IMR_MBUS 0x0800 /* MBUS intr */
-#define MCFSIM_IMR_UART1 0x1000 /* UART 1 intr */
-#define MCFSIM_IMR_UART2 0x2000 /* UART 2 intr */
-
-#if defined(CONFIG_M5206e)
-#define MCFSIM_IMR_DMA1 0x4000 /* DMA 1 intr */
-#define MCFSIM_IMR_DMA2 0x8000 /* DMA 2 intr */
-#elif defined(CONFIG_M5249) || defined(CONFIG_M5307)
-#define MCFSIM_IMR_DMA0 0x4000 /* DMA 0 intr */
-#define MCFSIM_IMR_DMA1 0x8000 /* DMA 1 intr */
-#define MCFSIM_IMR_DMA2 0x10000 /* DMA 2 intr */
-#define MCFSIM_IMR_DMA3 0x20000 /* DMA 3 intr */
-#endif
-
-/*
- * Mask for all of the SIM devices. Some parts have more or less
- * SIM devices. This is a catchall for the sandard set.
- */
-#ifndef MCFSIM_IMR_MASKALL
-#define MCFSIM_IMR_MASKALL 0x3ffe /* All intr sources */
-#endif
-
-
-/*
- * PIT interrupt settings, if not found in mXXXXsim.h file.
- */
-#ifndef ICR_INTRCONF
-#define ICR_INTRCONF 0x2b /* PIT1 level 5, priority 3 */
-#endif
-#ifndef MCFPIT_IMR
-#define MCFPIT_IMR MCFINTC_IMRH
-#endif
-#ifndef MCFPIT_IMR_IBIT
-#define MCFPIT_IMR_IBIT (1 << (MCFINT_PIT1 - 32))
-#endif
-
-
-#ifndef __ASSEMBLY__
-/*
- * Definition for the interrupt auto-vectoring support.
- */
-extern void mcf_autovector(unsigned int vec);
-#endif /* __ASSEMBLY__ */
-
/****************************************************************************/
#endif /* mcfsim_h */
diff --git a/arch/m68k/include/asm/mcfsmc.h b/arch/m68k/include/asm/mcfsmc.h
index 2d7a4dbd968..527bea5d678 100644
--- a/arch/m68k/include/asm/mcfsmc.h
+++ b/arch/m68k/include/asm/mcfsmc.h
@@ -167,15 +167,15 @@ void smc_remap(unsigned int ioaddr)
static int once = 0;
extern unsigned short ppdata;
if (once++ == 0) {
- *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADDR)) = 0x00ec;
+ *((volatile unsigned short *)MCFSIM_PADDR) = 0x00ec;
ppdata |= 0x0080;
- *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata;
+ *((volatile unsigned short *)MCFSIM_PADAT) = ppdata;
outw(0x0001, ioaddr + BANK_SELECT);
outw(0x0001, ioaddr + BANK_SELECT);
outw(0x0067, ioaddr + BASE);
ppdata &= ~0x0080;
- *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata;
+ *((volatile unsigned short *)MCFSIM_PADAT) = ppdata;
}
*((volatile unsigned short *)(MCF_MBAR+MCFSIM_CSCR3)) = 0x1180;
diff --git a/arch/m68k/include/asm/mman.h b/arch/m68k/include/asm/mman.h
index 9f5c4c4b3c7..8eebf89f5ab 100644
--- a/arch/m68k/include/asm/mman.h
+++ b/arch/m68k/include/asm/mman.h
@@ -1,17 +1 @@
-#ifndef __M68K_MMAN_H__
-#define __M68K_MMAN_H__
-
-#include <asm-generic/mman-common.h>
-
-#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
-#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
-#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
-#define MAP_LOCKED 0x2000 /* pages are locked */
-#define MAP_NORESERVE 0x4000 /* don't check for reservations */
-#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
-#define MAP_NONBLOCK 0x10000 /* do not block on IO */
-
-#define MCL_CURRENT 1 /* lock all current mappings */
-#define MCL_FUTURE 2 /* lock all future mappings */
-
-#endif /* __M68K_MMAN_H__ */
+#include <asm-generic/mman.h>
diff --git a/arch/m68k/include/asm/nettel.h b/arch/m68k/include/asm/nettel.h
index 0299f6a2dee..4dec2d9fb99 100644
--- a/arch/m68k/include/asm/nettel.h
+++ b/arch/m68k/include/asm/nettel.h
@@ -48,14 +48,14 @@ extern volatile unsigned short ppdata;
static __inline__ unsigned int mcf_getppdata(void)
{
volatile unsigned short *pp;
- pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT);
+ pp = (volatile unsigned short *) MCFSIM_PADAT;
return((unsigned int) *pp);
}
static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
{
volatile unsigned short *pp;
- pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT);
+ pp = (volatile unsigned short *) MCFSIM_PADAT;
ppdata = (ppdata & ~mask) | bits;
*pp = ppdata;
}
diff --git a/arch/m68k/include/asm/page_no.h b/arch/m68k/include/asm/page_no.h
index 9aa3f90f485..1f31b060cc8 100644
--- a/arch/m68k/include/asm/page_no.h
+++ b/arch/m68k/include/asm/page_no.h
@@ -1,10 +1,12 @@
#ifndef _M68KNOMMU_PAGE_H
#define _M68KNOMMU_PAGE_H
+#include <linux/const.h>
+
/* PAGE_SHIFT determines the page size */
#define PAGE_SHIFT (12)
-#define PAGE_SIZE (1UL << PAGE_SHIFT)
+#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT)
#define PAGE_MASK (~(PAGE_SIZE-1))
#include <asm/setup.h>
diff --git a/arch/m68k/include/asm/pinmux.h b/arch/m68k/include/asm/pinmux.h
new file mode 100644
index 00000000000..119ee686dbd
--- /dev/null
+++ b/arch/m68k/include/asm/pinmux.h
@@ -0,0 +1,30 @@
+/*
+ * Coldfire generic GPIO pinmux support.
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef pinmux_h
+#define pinmux_h
+
+#define MCFPINMUX_NONE -1
+
+extern int mcf_pinmux_request(unsigned, unsigned);
+extern void mcf_pinmux_release(unsigned, unsigned);
+
+static inline int mcf_pinmux_is_valid(unsigned pinmux)
+{
+ return pinmux != MCFPINMUX_NONE;
+}
+
+#endif
+
diff --git a/arch/m68k/include/asm/processor.h b/arch/m68k/include/asm/processor.h
index fc3f2c22f2b..74fd674b15a 100644
--- a/arch/m68k/include/asm/processor.h
+++ b/arch/m68k/include/asm/processor.h
@@ -1,5 +1,170 @@
-#ifdef __uClinux__
-#include "processor_no.h"
+/*
+ * include/asm-m68k/processor.h
+ *
+ * Copyright (C) 1995 Hamish Macdonald
+ */
+
+#ifndef __ASM_M68K_PROCESSOR_H
+#define __ASM_M68K_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#include <linux/thread_info.h>
+#include <asm/segment.h>
+#include <asm/fpu.h>
+#include <asm/ptrace.h>
+
+static inline unsigned long rdusp(void)
+{
+#ifdef CONFIG_COLDFIRE
+ extern unsigned int sw_usp;
+ return sw_usp;
#else
-#include "processor_mm.h"
+ unsigned long usp;
+ __asm__ __volatile__("move %/usp,%0" : "=a" (usp));
+ return usp;
+#endif
+}
+
+static inline void wrusp(unsigned long usp)
+{
+#ifdef CONFIG_COLDFIRE
+ extern unsigned int sw_usp;
+ sw_usp = usp;
+#else
+ __asm__ __volatile__("move %0,%/usp" : : "a" (usp));
+#endif
+}
+
+/*
+ * User space process size: 3.75GB. This is hardcoded into a few places,
+ * so don't change it unless you know what you are doing.
+ */
+#ifndef CONFIG_SUN3
+#define TASK_SIZE (0xF0000000UL)
+#else
+#define TASK_SIZE (0x0E000000UL)
+#endif
+
+#ifdef __KERNEL__
+#define STACK_TOP TASK_SIZE
+#define STACK_TOP_MAX STACK_TOP
+#endif
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#ifdef CONFIG_MMU
+#ifndef CONFIG_SUN3
+#define TASK_UNMAPPED_BASE 0xC0000000UL
+#else
+#define TASK_UNMAPPED_BASE 0x0A000000UL
+#endif
+#define TASK_UNMAPPED_ALIGN(addr, off) PAGE_ALIGN(addr)
+#else
+#define TASK_UNMAPPED_BASE 0
+#endif
+
+struct thread_struct {
+ unsigned long ksp; /* kernel stack pointer */
+ unsigned long usp; /* user stack pointer */
+ unsigned short sr; /* saved status register */
+ unsigned short fs; /* saved fs (sfc, dfc) */
+ unsigned long crp[2]; /* cpu root pointer */
+ unsigned long esp0; /* points to SR of stack frame */
+ unsigned long faddr; /* info about last fault */
+ int signo, code;
+ unsigned long fp[8*3];
+ unsigned long fpcntl[3]; /* fp control regs */
+ unsigned char fpstate[FPSTATESIZE]; /* floating point state */
+ struct thread_info info;
+};
+
+#define INIT_THREAD { \
+ .ksp = sizeof(init_stack) + (unsigned long) init_stack, \
+ .sr = PS_S, \
+ .fs = __KERNEL_DS, \
+ .info = INIT_THREAD_INFO(init_task), \
+}
+
+#ifdef CONFIG_MMU
+/*
+ * Do necessary setup to start up a newly executed thread.
+ */
+static inline void start_thread(struct pt_regs * regs, unsigned long pc,
+ unsigned long usp)
+{
+ /* reads from user space */
+ set_fs(USER_DS);
+
+ regs->pc = pc;
+ regs->sr &= ~0x2000;
+ wrusp(usp);
+}
+
+#else
+
+/*
+ * Coldfire stacks need to be re-aligned on trap exit, conventional
+ * 68k can handle this case cleanly.
+ */
+#ifdef CONFIG_COLDFIRE
+#define reformat(_regs) do { (_regs)->format = 0x4; } while(0)
+#else
+#define reformat(_regs) do { } while (0)
+#endif
+
+#define start_thread(_regs, _pc, _usp) \
+do { \
+ set_fs(USER_DS); /* reads from user space */ \
+ (_regs)->pc = (_pc); \
+ ((struct switch_stack *)(_regs))[-1].a6 = 0; \
+ reformat(_regs); \
+ if (current->mm) \
+ (_regs)->d5 = current->mm->start_data; \
+ (_regs)->sr &= ~0x2000; \
+ wrusp(_usp); \
+} while(0)
+
+#endif
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+static inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk) do { } while (0)
+
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/*
+ * Free current thread data structures etc..
+ */
+static inline void exit_thread(void)
+{
+}
+
+extern unsigned long thread_saved_pc(struct task_struct *tsk);
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk) \
+ ({ \
+ unsigned long eip = 0; \
+ if ((tsk)->thread.esp0 > PAGE_SIZE && \
+ (virt_addr_valid((tsk)->thread.esp0))) \
+ eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
+ eip; })
+#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp)
+
+#define cpu_relax() barrier()
+
#endif
diff --git a/arch/m68k/include/asm/processor_mm.h b/arch/m68k/include/asm/processor_mm.h
deleted file mode 100644
index 1f61ef53f0e..00000000000
--- a/arch/m68k/include/asm/processor_mm.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * include/asm-m68k/processor.h
- *
- * Copyright (C) 1995 Hamish Macdonald
- */
-
-#ifndef __ASM_M68K_PROCESSOR_H
-#define __ASM_M68K_PROCESSOR_H
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ __label__ _l; _l: &&_l;})
-
-#include <linux/thread_info.h>
-#include <asm/segment.h>
-#include <asm/fpu.h>
-#include <asm/ptrace.h>
-
-static inline unsigned long rdusp(void)
-{
- unsigned long usp;
-
- __asm__ __volatile__("move %/usp,%0" : "=a" (usp));
- return usp;
-}
-
-static inline void wrusp(unsigned long usp)
-{
- __asm__ __volatile__("move %0,%/usp" : : "a" (usp));
-}
-
-/*
- * User space process size: 3.75GB. This is hardcoded into a few places,
- * so don't change it unless you know what you are doing.
- */
-#ifndef CONFIG_SUN3
-#define TASK_SIZE (0xF0000000UL)
-#else
-#define TASK_SIZE (0x0E000000UL)
-#endif
-
-#ifdef __KERNEL__
-#define STACK_TOP TASK_SIZE
-#define STACK_TOP_MAX STACK_TOP
-#endif
-
-/* This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#ifndef CONFIG_SUN3
-#define TASK_UNMAPPED_BASE 0xC0000000UL
-#else
-#define TASK_UNMAPPED_BASE 0x0A000000UL
-#endif
-#define TASK_UNMAPPED_ALIGN(addr, off) PAGE_ALIGN(addr)
-
-struct thread_struct {
- unsigned long ksp; /* kernel stack pointer */
- unsigned long usp; /* user stack pointer */
- unsigned short sr; /* saved status register */
- unsigned short fs; /* saved fs (sfc, dfc) */
- unsigned long crp[2]; /* cpu root pointer */
- unsigned long esp0; /* points to SR of stack frame */
- unsigned long faddr; /* info about last fault */
- int signo, code;
- unsigned long fp[8*3];
- unsigned long fpcntl[3]; /* fp control regs */
- unsigned char fpstate[FPSTATESIZE]; /* floating point state */
- struct thread_info info;
-};
-
-#define INIT_THREAD { \
- .ksp = sizeof(init_stack) + (unsigned long) init_stack, \
- .sr = PS_S, \
- .fs = __KERNEL_DS, \
- .info = INIT_THREAD_INFO(init_task), \
-}
-
-/*
- * Do necessary setup to start up a newly executed thread.
- */
-static inline void start_thread(struct pt_regs * regs, unsigned long pc,
- unsigned long usp)
-{
- /* reads from user space */
- set_fs(USER_DS);
-
- regs->pc = pc;
- regs->sr &= ~0x2000;
- wrusp(usp);
-}
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-
-/* Free all resources held by a thread. */
-static inline void release_thread(struct task_struct *dead_task)
-{
-}
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk) do { } while (0)
-
-extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-
-/*
- * Free current thread data structures etc..
- */
-static inline void exit_thread(void)
-{
-}
-
-extern unsigned long thread_saved_pc(struct task_struct *tsk);
-
-unsigned long get_wchan(struct task_struct *p);
-
-#define KSTK_EIP(tsk) \
- ({ \
- unsigned long eip = 0; \
- if ((tsk)->thread.esp0 > PAGE_SIZE && \
- (virt_addr_valid((tsk)->thread.esp0))) \
- eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
- eip; })
-#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp)
-
-#define cpu_relax() barrier()
-
-#endif
diff --git a/arch/m68k/include/asm/processor_no.h b/arch/m68k/include/asm/processor_no.h
deleted file mode 100644
index 7a1e0ba35f5..00000000000
--- a/arch/m68k/include/asm/processor_no.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * include/asm-m68knommu/processor.h
- *
- * Copyright (C) 1995 Hamish Macdonald
- */
-
-#ifndef __ASM_M68K_PROCESSOR_H
-#define __ASM_M68K_PROCESSOR_H
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ __label__ _l; _l: &&_l;})
-
-#include <linux/compiler.h>
-#include <linux/threads.h>
-#include <asm/types.h>
-#include <asm/segment.h>
-#include <asm/fpu.h>
-#include <asm/ptrace.h>
-#include <asm/current.h>
-
-static inline unsigned long rdusp(void)
-{
-#ifdef CONFIG_COLDFIRE
- extern unsigned int sw_usp;
- return(sw_usp);
-#else
- unsigned long usp;
- __asm__ __volatile__("move %/usp,%0" : "=a" (usp));
- return usp;
-#endif
-}
-
-static inline void wrusp(unsigned long usp)
-{
-#ifdef CONFIG_COLDFIRE
- extern unsigned int sw_usp;
- sw_usp = usp;
-#else
- __asm__ __volatile__("move %0,%/usp" : : "a" (usp));
-#endif
-}
-
-/*
- * User space process size: 3.75GB. This is hardcoded into a few places,
- * so don't change it unless you know what you are doing.
- */
-#define TASK_SIZE (0xF0000000UL)
-
-/*
- * This decides where the kernel will search for a free chunk of vm
- * space during mmap's. We won't be using it
- */
-#define TASK_UNMAPPED_BASE 0
-
-/*
- * if you change this structure, you must change the code and offsets
- * in m68k/machasm.S
- */
-
-struct thread_struct {
- unsigned long ksp; /* kernel stack pointer */
- unsigned long usp; /* user stack pointer */
- unsigned short sr; /* saved status register */
- unsigned short fs; /* saved fs (sfc, dfc) */
- unsigned long crp[2]; /* cpu root pointer */
- unsigned long esp0; /* points to SR of stack frame */
- unsigned long fp[8*3];
- unsigned long fpcntl[3]; /* fp control regs */
- unsigned char fpstate[FPSTATESIZE]; /* floating point state */
-};
-
-#define INIT_THREAD { \
- .ksp = sizeof(init_stack) + (unsigned long) init_stack, \
- .sr = PS_S, \
- .fs = __KERNEL_DS, \
-}
-
-/*
- * Coldfire stacks need to be re-aligned on trap exit, conventional
- * 68k can handle this case cleanly.
- */
-#if defined(CONFIG_COLDFIRE)
-#define reformat(_regs) do { (_regs)->format = 0x4; } while(0)
-#else
-#define reformat(_regs) do { } while (0)
-#endif
-
-/*
- * Do necessary setup to start up a newly executed thread.
- *
- * pass the data segment into user programs if it exists,
- * it can't hurt anything as far as I can tell
- */
-#define start_thread(_regs, _pc, _usp) \
-do { \
- set_fs(USER_DS); /* reads from user space */ \
- (_regs)->pc = (_pc); \
- ((struct switch_stack *)(_regs))[-1].a6 = 0; \
- reformat(_regs); \
- if (current->mm) \
- (_regs)->d5 = current->mm->start_data; \
- (_regs)->sr &= ~0x2000; \
- wrusp(_usp); \
-} while(0)
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-
-/* Free all resources held by a thread. */
-static inline void release_thread(struct task_struct *dead_task)
-{
-}
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk) do { } while (0)
-
-extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-
-/*
- * Free current thread data structures etc..
- */
-static inline void exit_thread(void)
-{
-}
-
-unsigned long thread_saved_pc(struct task_struct *tsk);
-unsigned long get_wchan(struct task_struct *p);
-
-#define KSTK_EIP(tsk) \
- ({ \
- unsigned long eip = 0; \
- if ((tsk)->thread.esp0 > PAGE_SIZE && \
- (virt_addr_valid((tsk)->thread.esp0))) \
- eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
- eip; })
-#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp)
-
-#define cpu_relax() barrier()
-
-#endif
diff --git a/arch/m68k/include/asm/timex.h b/arch/m68k/include/asm/timex.h
index b87f2f278f6..6759dad954f 100644
--- a/arch/m68k/include/asm/timex.h
+++ b/arch/m68k/include/asm/timex.h
@@ -3,10 +3,23 @@
*
* m68k architecture timex specifications
*/
-#ifndef _ASMm68k_TIMEX_H
-#define _ASMm68k_TIMEX_H
+#ifndef _ASMm68K_TIMEX_H
+#define _ASMm68K_TIMEX_H
+#ifdef CONFIG_COLDFIRE
+/*
+ * CLOCK_TICK_RATE should give the underlying frequency of the tick timer
+ * to make ntp work best. For Coldfires, that's the main clock.
+ */
+#include <asm/coldfire.h>
+#define CLOCK_TICK_RATE MCF_CLK
+#else
+/*
+ * This default CLOCK_TICK_RATE is probably wrong for many 68k boards
+ * Users of those boards will need to check and modify accordingly
+ */
#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */
+#endif
typedef unsigned long cycles_t;
diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h
index 946d8691f2b..48b87f5ced5 100644
--- a/arch/m68k/include/asm/unistd.h
+++ b/arch/m68k/include/asm/unistd.h
@@ -335,7 +335,7 @@
#define __NR_preadv 329
#define __NR_pwritev 330
#define __NR_rt_tgsigqueueinfo 331
-#define __NR_perf_counter_open 332
+#define __NR_perf_event_open 332
#ifdef __KERNEL__