diff options
Diffstat (limited to 'arch/m68k/Kconfig')
| -rw-r--r-- | arch/m68k/Kconfig | 456 |
1 files changed, 33 insertions, 423 deletions
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 525174d4167..6e056d3c5d0 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -1,13 +1,11 @@ config M68K bool default y - select HAVE_AOUT select HAVE_IDE - select GENERIC_ATOMIC64 - -config MMU - bool - default y + select HAVE_AOUT if MMU + select GENERIC_ATOMIC64 if MMU + select HAVE_GENERIC_HARDIRQS if !MMU + select GENERIC_HARDIRQS_NO_DEPRECATED if !MMU config RWSEM_GENERIC_SPINLOCK bool @@ -34,457 +32,67 @@ config TIME_LOW_RES bool default y -config GENERIC_IOMAP - bool - default y - -config ARCH_MAY_HAVE_PC_FDC - bool - depends on BROKEN && (Q40 || SUN3X) - default y - config NO_IOPORT def_bool y config NO_DMA - def_bool SUN3 + def_bool (MMU && SUN3) || (!MMU && !COLDFIRE) +config ZONE_DMA + bool + default y config HZ int + default 1000 if CLEOPATRA default 100 -config ARCH_USES_GETTIMEOFFSET - def_bool y - source "init/Kconfig" source "kernel/Kconfig.freezer" -menu "Platform dependent setup" - -config EISA - bool - ---help--- - The Extended Industry Standard Architecture (EISA) bus was - developed as an open alternative to the IBM MicroChannel bus. - - The EISA bus provided some of the features of the IBM MicroChannel - bus while maintaining backward compatibility with cards made for - the older ISA bus. The EISA bus saw limited use between 1988 and - 1995 when it was made obsolete by the PCI bus. - - Say Y here if you are building a kernel for an EISA-based machine. - - Otherwise, say N. - -config MCA - bool - help - MicroChannel Architecture is found in some IBM PS/2 machines and - laptops. It is a bus system similar to PCI or ISA. See - <file:Documentation/mca.txt> (and especially the web page given - there) before attempting to build an MCA bus kernel. - -config PCMCIA - tristate - ---help--- - Say Y here if you want to attach PCMCIA- or PC-cards to your Linux - computer. These are credit-card size devices such as network cards, - modems or hard drives often used with laptops computers. There are - actually two varieties of these cards: the older 16 bit PCMCIA cards - and the newer 32 bit CardBus cards. If you want to use CardBus - cards, you need to say Y here and also to "CardBus support" below. - - To use your PC-cards, you will need supporting software from David - Hinds' pcmcia-cs package (see the file <file:Documentation/Changes> - for location). Please also read the PCMCIA-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as modules, choose M here: the - modules will be called pcmcia_core and ds. - -config AMIGA - bool "Amiga support" - select MMU_MOTOROLA if MMU - help - This option enables support for the Amiga series of computers. If - you plan to use this kernel on an Amiga, say Y here and browse the - material available in <file:Documentation/m68k>; otherwise say N. - -config ATARI - bool "Atari support" - select MMU_MOTOROLA if MMU - help - This option enables support for the 68000-based Atari series of - computers (including the TT, Falcon and Medusa). If you plan to use - this kernel on an Atari, say Y here and browse the material - available in <file:Documentation/m68k>; otherwise say N. - -config MAC - bool "Macintosh support" - select MMU_MOTOROLA if MMU - help - This option enables support for the Apple Macintosh series of - computers (yes, there is experimental support now, at least for part - of the series). - - Say N unless you're willing to code the remaining necessary support. - ;) - -config NUBUS - bool - depends on MAC - default y - -config M68K_L2_CACHE - bool - depends on MAC - default y - -config APOLLO - bool "Apollo support" - select MMU_MOTOROLA if MMU - help - Say Y here if you want to run Linux on an MC680x0-based Apollo - Domain workstation such as the DN3500. - -config VME - bool "VME (Motorola and BVM) support" - select MMU_MOTOROLA if MMU - help - Say Y here if you want to build a kernel for a 680x0 based VME - board. Boards currently supported include Motorola boards MVME147, - MVME162, MVME166, MVME167, MVME172, and MVME177. BVME4000 and - BVME6000 boards from BVM Ltd are also supported. - -config MVME147 - bool "MVME147 support" - depends on VME - help - Say Y to include support for early Motorola VME boards. This will - build a kernel which can run on MVME147 single-board computers. If - you select this option you will have to select the appropriate - drivers for SCSI, Ethernet and serial ports later on. - -config MVME16x - bool "MVME162, 166 and 167 support" - depends on VME - help - Say Y to include support for Motorola VME boards. This will build a - kernel which can run on MVME162, MVME166, MVME167, MVME172, and - MVME177 boards. If you select this option you will have to select - the appropriate drivers for SCSI, Ethernet and serial ports later - on. - -config BVME6000 - bool "BVME4000 and BVME6000 support" - depends on VME - help - Say Y to include support for VME boards from BVM Ltd. This will - build a kernel which can run on BVME4000 and BVME6000 boards. If - you select this option you will have to select the appropriate - drivers for SCSI, Ethernet and serial ports later on. - -config HP300 - bool "HP9000/300 and HP9000/400 support" - select MMU_MOTOROLA if MMU - help - This option enables support for the HP9000/300 and HP9000/400 series - of workstations. Support for these machines is still somewhat - experimental. If you plan to try to use the kernel on such a machine - say Y here. - Everybody else says N. - -config DIO - bool "DIO bus support" - depends on HP300 +config MMU + bool "MMU-based Paged Memory Management Support" default y help - Say Y here to enable support for the "DIO" expansion bus used in - HP300 machines. If you are using such a system you almost certainly - want this. - -config SUN3X - bool "Sun3x support" - select MMU_MOTOROLA if MMU - select M68030 - help - This option enables support for the Sun 3x series of workstations. - Be warned that this support is very experimental. - Note that Sun 3x kernels are not compatible with Sun 3 hardware. - General Linux information on the Sun 3x series (now discontinued) - is at <http://www.angelfire.com/ca2/tech68k/sun3.html>. - - If you don't want to compile a kernel for a Sun 3x, say N. - -config Q40 - bool "Q40/Q60 support" - select MMU_MOTOROLA if MMU - help - The Q40 is a Motorola 68040-based successor to the Sinclair QL - manufactured in Germany. There is an official Q40 home page at - <http://www.q40.de/>. This option enables support for the Q40 and - Q60. Select your CPU below. For 68LC060 don't forget to enable FPU - emulation. - -config SUN3 - bool "Sun3 support" - depends on !MMU_MOTOROLA - select MMU_SUN3 if MMU - select M68020 - help - This option enables support for the Sun 3 series of workstations - (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires - that all other hardware types must be disabled, as Sun 3 kernels - are incompatible with all other m68k targets (including Sun 3x!). - - If you don't want to compile a kernel exclusively for a Sun 3, say N. - -config NATFEAT - bool "ARAnyM emulator support" - depends on ATARI - help - This option enables support for ARAnyM native features, such as - access to a disk image as /dev/hda. - -config NFBLOCK - tristate "NatFeat block device support" - depends on BLOCK && NATFEAT - help - Say Y to include support for the ARAnyM NatFeat block device - which allows direct access to the hard drives without using - the hardware emulation. - -config NFCON - tristate "NatFeat console driver" - depends on NATFEAT - help - Say Y to include support for the ARAnyM NatFeat console driver - which allows the console output to be redirected to the stderr - output of ARAnyM. - -config NFETH - tristate "NatFeat Ethernet support" - depends on NET_ETHERNET && NATFEAT - help - Say Y to include support for the ARAnyM NatFeat network device - which will emulate a regular ethernet device while presenting an - ethertap device to the host system. - -comment "Processor type" - -config M68020 - bool "68020 support" - help - If you anticipate running this kernel on a computer with a MC68020 - processor, say Y. Otherwise, say N. Note that the 68020 requires a - 68851 MMU (Memory Management Unit) to run Linux/m68k, except on the - Sun 3, which provides its own version. - -config M68030 - bool "68030 support" - depends on !MMU_SUN3 - help - If you anticipate running this kernel on a computer with a MC68030 - processor, say Y. Otherwise, say N. Note that a MC68EC030 will not - work, as it does not include an MMU (Memory Management Unit). - -config M68040 - bool "68040 support" - depends on !MMU_SUN3 - help - If you anticipate running this kernel on a computer with a MC68LC040 - or MC68040 processor, say Y. Otherwise, say N. Note that an - MC68EC040 will not work, as it does not include an MMU (Memory - Management Unit). - -config M68060 - bool "68060 support" - depends on !MMU_SUN3 - help - If you anticipate running this kernel on a computer with a MC68060 - processor, say Y. Otherwise, say N. - -config MMU_MOTOROLA - bool - -config MMU_SUN3 - bool - depends on MMU && !MMU_MOTOROLA - -config M68KFPU_EMU - bool "Math emulation support (EXPERIMENTAL)" - depends on EXPERIMENTAL - help - At some point in the future, this will cause floating-point math - instructions to be emulated by the kernel on machines that lack a - floating-point math coprocessor. Thrill-seekers and chronically - sleep-deprived psychotic hacker types can say Y now, everyone else - should probably wait a while. - -config M68KFPU_EMU_EXTRAPREC - bool "Math emulation extra precision" - depends on M68KFPU_EMU - help - The fpu uses normally a few bit more during calculations for - correct rounding, the emulator can (often) do the same but this - extra calculation can cost quite some time, so you can disable - it here. The emulator will then "only" calculate with a 64 bit - mantissa and round slightly incorrect, what is more than enough - for normal usage. - -config M68KFPU_EMU_ONLY - bool "Math emulation only kernel" - depends on M68KFPU_EMU - help - This option prevents any floating-point instructions from being - compiled into the kernel, thereby the kernel doesn't save any - floating point context anymore during task switches, so this - kernel will only be usable on machines without a floating-point - math coprocessor. This makes the kernel a bit faster as no tests - needs to be executed whether a floating-point instruction in the - kernel should be executed or not. - -config ADVANCED - bool "Advanced configuration options" - ---help--- - This gives you access to some advanced options for the CPU. The - defaults should be fine for most users, but these options may make - it possible for you to improve performance somewhat if you know what - you are doing. - - Note that the answer to this question won't directly affect the - kernel: saying N will just cause the configurator to skip all - the questions about these options. + Select if you want MMU-based virtualised addressing space + support by paged memory management. If unsure, say 'Y'. - Most users should say N to this question. - -config RMW_INSNS - bool "Use read-modify-write instructions" - depends on ADVANCED - ---help--- - This allows to use certain instructions that work with indivisible - read-modify-write bus cycles. While this is faster than the - workaround of disabling interrupts, it can conflict with DMA - ( = direct memory access) on many Amiga systems, and it is also said - to destabilize other machines. It is very likely that this will - cause serious problems on any Amiga or Atari Medusa if set. The only - configuration where it should work are 68030-based Ataris, where it - apparently improves performance. But you've been warned! Unless you - really know what you are doing, say N. Try Y only if you're quite - adventurous. - -config SINGLE_MEMORY_CHUNK - bool "Use one physical chunk of memory only" if ADVANCED && !SUN3 - default y if SUN3 - select NEED_MULTIPLE_NODES - help - Ignore all but the first contiguous chunk of physical memory for VM - purposes. This will save a few bytes kernel size and may speed up - some operations. Say N if not sure. +menu "Platform dependent setup" -config 060_WRITETHROUGH - bool "Use write-through caching for 68060 supervisor accesses" - depends on ADVANCED && M68060 - ---help--- - The 68060 generally uses copyback caching of recently accessed data. - Copyback caching means that memory writes will be held in an on-chip - cache and only written back to memory some time later. Saying Y - here will force supervisor (kernel) accesses to use writethrough - caching. Writethrough caching means that data is written to memory - straight away, so that cache and memory data always agree. - Writethrough caching is less efficient, but is needed for some - drivers on 68060 based systems where the 68060 bus snooping signal - is hardwired on. The 53c710 SCSI driver is known to suffer from - this problem. - -config ARCH_DISCONTIGMEM_ENABLE - def_bool !SINGLE_MEMORY_CHUNK - -config NODES_SHIFT - int - default "3" - depends on !SINGLE_MEMORY_CHUNK +if MMU +source arch/m68k/Kconfig.mmu +endif +if !MMU +source arch/m68k/Kconfig.nommu +endif source "mm/Kconfig" endmenu -menu "General setup" +menu "Executable file formats" source "fs/Kconfig.binfmt" -config ZORRO - bool "Amiga Zorro (AutoConfig) bus support" - depends on AMIGA - help - This enables support for the Zorro bus in the Amiga. If you have - expansion cards in your Amiga that conform to the Amiga - AutoConfig(tm) specification, say Y, otherwise N. Note that even - expansion cards that do not fit in the Zorro slots but fit in e.g. - the CPU slot may fall in this category, so you have to say Y to let - Linux use these. - -config AMIGA_PCMCIA - bool "Amiga 1200/600 PCMCIA support (EXPERIMENTAL)" - depends on AMIGA && EXPERIMENTAL - help - Include support in the kernel for pcmcia on Amiga 1200 and Amiga - 600. If you intend to use pcmcia cards say Y; otherwise say N. - -config STRAM_PROC - bool "ST-RAM statistics in /proc" - depends on ATARI - help - Say Y here to report ST-RAM usage statistics in /proc/stram. - -config HEARTBEAT - bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || MAC ||Q40 - default y if !AMIGA && !APOLLO && !ATARI && !MAC && !Q40 && HP300 - help - Use the power-on LED on your machine as a load meter. The exact - behavior is platform-dependent, but normally the flash frequency is - a hyperbolic function of the 5-minute load average. - -# We have a dedicated heartbeat LED. :-) -config PROC_HARDWARE - bool "/proc/hardware support" - help - Say Y here to support the /proc/hardware file, which gives you - access to information about the machine you're running on, - including the model, CPU, MMU, clock speed, BogoMIPS rating, - and memory size. - -config ISA - bool - depends on Q40 || AMIGA_PCMCIA - default y - help - Find out whether you have ISA slots on your motherboard. ISA is the - name of a bus system, i.e. the way the CPU talks to the other stuff - inside your box. Other bus systems are PCI, EISA, MicroChannel - (MCA) or VESA. ISA is an older system, now being displaced by PCI; - newer boards don't support it. If you have ISA, say Y, otherwise N. - -config GENERIC_ISA_DMA - bool - depends on Q40 || AMIGA_PCMCIA - default y - -config ZONE_DMA - bool - default y +endmenu -source "drivers/pci/Kconfig" +if !MMU +menu "Power management options" -source "drivers/zorro/Kconfig" +config PM + bool "Power Management support" + help + Support processor power management modes endmenu +endif source "net/Kconfig" source "drivers/Kconfig" +if MMU + menu "Character devices" config ATARI_MFPSER @@ -627,6 +235,8 @@ config SERIAL_CONSOLE endmenu +endif + source "fs/Kconfig" source "arch/m68k/Kconfig.debug" |