diff options
Diffstat (limited to 'arch/ia64/sn/kernel/setup.c')
| -rw-r--r-- | arch/ia64/sn/kernel/setup.c | 94 |
1 files changed, 51 insertions, 43 deletions
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index 5f2dcba7fa8..53b01b8e2f1 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -25,7 +25,6 @@ #include <linux/interrupt.h> #include <linux/acpi.h> #include <linux/compiler.h> -#include <linux/sched.h> #include <linux/root_dev.h> #include <linux/nodemask.h> #include <linux/pm.h> @@ -34,9 +33,9 @@ #include <asm/io.h> #include <asm/sal.h> #include <asm/machvec.h> -#include <asm/system.h> #include <asm/processor.h> #include <asm/vga.h> +#include <asm/setup.h> #include <asm/sn/arch.h> #include <asm/sn/addrs.h> #include <asm/sn/pda.h> @@ -65,8 +64,6 @@ extern void sn_timer_init(void); extern unsigned long last_time_offset; extern void (*ia64_mark_idle) (int); extern void snidle(int); -extern unsigned char acpi_kbd_controller_present; -extern unsigned long long (*ia64_printk_clock)(void); unsigned long sn_rtc_cycles_per_second; EXPORT_SYMBOL(sn_rtc_cycles_per_second); @@ -168,7 +165,7 @@ void __init early_sn_setup(void) * IO on SN2 is done via SAL calls, early_printk won't work without this. * * This code duplicates some of the ACPI table parsing that is in efi.c & sal.c. - * Any changes to those file may have to be made hereas well. + * Any changes to those file may have to be made here as well. */ efi_systab = (efi_system_table_t *) __va(ia64_boot_param->efi_systab); config_tables = __va(efi_systab->tables); @@ -195,7 +192,7 @@ void __init early_sn_setup(void) } extern int platform_intr_list[]; -static int __initdata shub_1_1_found; +static int shub_1_1_found; /* * sn_check_for_wars @@ -203,7 +200,7 @@ static int __initdata shub_1_1_found; * Set flag for enabling shub specific wars */ -static inline int __init is_shub_1_1(int nasid) +static inline int is_shub_1_1(int nasid) { unsigned long id; int rev; @@ -215,7 +212,7 @@ static inline int __init is_shub_1_1(int nasid) return rev <= 2; } -static void __init sn_check_for_wars(void) +static void sn_check_for_wars(void) { int cnode; @@ -244,7 +241,7 @@ static void __init sn_check_for_wars(void) * Note: This stuff is duped here because Altix requires the PCDP to * locate a usable VGA device due to lack of proper ACPI support. Structures * could be used from drivers/firmware/pcdp.h, but it was decided that moving - * this file to a more public location just for Altix use was undesireable. + * this file to a more public location just for Altix use was undesirable. */ struct hcdp_uart_desc { @@ -349,8 +346,7 @@ sn_scan_pcdp(void) continue; /* not PCI interconnect */ if (if_pci.translation & PCDP_PCI_TRANS_IOPORT) - vga_console_iobase = - if_pci.ioport_tra | __IA64_UNCACHED_OFFSET; + vga_console_iobase = if_pci.ioport_tra; if (if_pci.translation & PCDP_PCI_TRANS_MMIO) vga_console_membase = @@ -363,14 +359,6 @@ sn_scan_pcdp(void) static unsigned long sn2_rtc_initial; -static unsigned long long ia64_sn2_printk_clock(void) -{ - unsigned long rtc_now = rtc_time(); - - return (rtc_now - sn2_rtc_initial) * - (1000000000 / sn_rtc_cycles_per_second); -} - /** * sn_setup - SN platform setup routine * @cmdline_p: kernel command line @@ -389,7 +377,17 @@ void __init sn_setup(char **cmdline_p) ia64_sn_plat_set_error_handling_features(); // obsolete ia64_sn_set_os_feature(OSF_MCA_SLV_TO_OS_INIT_SLV); ia64_sn_set_os_feature(OSF_FEAT_LOG_SBES); + /* + * Note: The calls to notify the PROM of ACPI and PCI Segment + * support must be done prior to acpi_load_tables(), as + * an ACPI capable PROM will rebuild the DSDT as result + * of the call. + */ + ia64_sn_set_os_feature(OSF_PCISEGMENT_ENABLE); + ia64_sn_set_os_feature(OSF_ACPI_ENABLE); + /* Load the new DSDT and SSDT tables into the global table list. */ + acpi_table_init(); #if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) /* @@ -414,6 +412,17 @@ void __init sn_setup(char **cmdline_p) if (! vga_console_membase) sn_scan_pcdp(); + /* + * Setup legacy IO space. + * vga_console_iobase maps to PCI IO Space address 0 on the + * bus containing the VGA console. + */ + if (vga_console_iobase) { + io_space[0].mmio_base = + (unsigned long) ioremap(vga_console_iobase, 0); + io_space[0].sparse = 0; + } + if (vga_console_membase) { /* usable vga ... make tty0 the preferred default console */ if (!strstr(*cmdline_p, "console=")) @@ -450,19 +459,6 @@ void __init sn_setup(char **cmdline_p) platform_intr_list[ACPI_INTERRUPT_CPEI] = IA64_CPE_VECTOR; - ia64_printk_clock = ia64_sn2_printk_clock; - - /* - * Old PROMs do not provide an ACPI FADT. Disable legacy keyboard - * support here so we don't have to listen to failed keyboard probe - * messages. - */ - if (is_shub1() && version <= 0x0209 && acpi_kbd_controller_present) { - printk(KERN_INFO "Disabling legacy keyboard support as prom " - "is too old and doesn't provide FADT\n"); - acpi_kbd_controller_present = 0; - } - printk("SGI SAL version %x.%02x\n", version >> 8, version & 0x00FF); /* @@ -511,12 +507,11 @@ static void __init sn_init_pdas(char **cmdline_p) cnodeid_t cnode; /* - * Allocate & initalize the nodepda for each node. + * Allocate & initialize the nodepda for each node. */ for_each_online_node(cnode) { nodepdaindr[cnode] = alloc_bootmem_node(NODE_DATA(cnode), sizeof(nodepda_t)); - memset(nodepdaindr[cnode], 0, sizeof(nodepda_t)); memset(nodepdaindr[cnode]->phys_cpuid, -1, sizeof(nodepdaindr[cnode]->phys_cpuid)); spin_lock_init(&nodepdaindr[cnode]->ptc_lock); @@ -525,11 +520,9 @@ static void __init sn_init_pdas(char **cmdline_p) /* * Allocate & initialize nodepda for TIOs. For now, put them on node 0. */ - for (cnode = num_online_nodes(); cnode < num_cnodes; cnode++) { + for (cnode = num_online_nodes(); cnode < num_cnodes; cnode++) nodepdaindr[cnode] = alloc_bootmem_node(NODE_DATA(0), sizeof(nodepda_t)); - memset(nodepdaindr[cnode], 0, sizeof(nodepda_t)); - } /* * Now copy the array of nodepda pointers to each nodepda. @@ -565,7 +558,7 @@ static void __init sn_init_pdas(char **cmdline_p) * Also sets up a few fields in the nodepda. Also known as * platform_cpu_init() by the ia64 machvec code. */ -void __cpuinit sn_cpu_init(void) +void sn_cpu_init(void) { int cpuid; int cpuphyid; @@ -574,7 +567,7 @@ void __cpuinit sn_cpu_init(void) int slice; int cnode; int i; - static int wars_have_been_checked; + static int wars_have_been_checked, set_cpu0_number; cpuid = smp_processor_id(); if (cpuid == 0 && IS_MEDUSA()) { @@ -599,8 +592,16 @@ void __cpuinit sn_cpu_init(void) /* * Don't check status. The SAL call is not supported on all PROMs * but a failure is harmless. + * Architecturally, cpu_init is always called twice on cpu 0. We + * should set cpu_number on cpu 0 once. */ - (void) ia64_sn_set_cpu_number(cpuid); + if (cpuid == 0) { + if (!set_cpu0_number) { + (void) ia64_sn_set_cpu_number(cpuid); + set_cpu0_number = 1; + } + } else + (void) ia64_sn_set_cpu_number(cpuid); /* * The boot cpu makes this call again after platform initialization is @@ -731,8 +732,7 @@ void __init build_cnode_tables(void) kl_config_hdr_t *klgraph_header; nasid = cnodeid_to_nasid(node); klgraph_header = ia64_sn_get_klconfig_addr(nasid); - if (klgraph_header == NULL) - BUG(); + BUG_ON(klgraph_header == NULL); brd = NODE_OFFSET_TO_LBOARD(nasid, klgraph_header->ch_board_info); while (brd) { if (board_needs_cnode(brd->brd_type) && physical_node_map[brd->brd_nasid] < 0) { @@ -749,7 +749,7 @@ nasid_slice_to_cpuid(int nasid, int slice) { long cpu; - for (cpu = 0; cpu < NR_CPUS; cpu++) + for (cpu = 0; cpu < nr_cpu_ids; cpu++) if (cpuid_to_nasid(cpu) == nasid && cpuid_to_slice(cpu) == slice) return cpu; @@ -763,5 +763,13 @@ int sn_prom_feature_available(int id) return 0; return test_bit(id, sn_prom_features); } + +void +sn_kernel_launch_event(void) +{ + /* ignore status until we understand possible failure, if any*/ + if (ia64_sn_kernel_launch_event()) + printk(KERN_ERR "KEXEC is not supported in this PROM, Please update the PROM.\n"); +} EXPORT_SYMBOL(sn_prom_feature_available); |