diff options
Diffstat (limited to 'arch/i386')
86 files changed, 4754 insertions, 4090 deletions
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index c2d54b80223..b1b2b30b1b8 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -441,8 +441,8 @@ config X86_REBOOTFIXUPS this config is intended, is when reboot ends with a stalled/hung system. - Currently, the only fixup is for the Geode GX1/CS5530A/TROM2.1. - combination. + Currently, the only fixup is for the Geode machines using + CS5530A and CS5536 chipsets. Say Y if you want to enable the fixup. Currently, it's safe to enable this option even if you don't need it. @@ -541,7 +541,7 @@ config HIGHMEM4G config HIGHMEM64G bool "64GB" - depends on X86_CMPXCHG64 + depends on !M386 && !M486 help Select this if you have a 32-bit processor and more than 4 gigabytes of physical RAM. @@ -891,7 +891,7 @@ config PHYSICAL_ALIGN Don't change this unless you know what you are doing. config HOTPLUG_CPU - bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" + bool "Support for suspend on SMP and hot-pluggable CPUs (EXPERIMENTAL)" depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER ---help--- Say Y here to experiment with turning CPUs off and on, and to diff --git a/arch/i386/Kconfig.cpu b/arch/i386/Kconfig.cpu index d7f6fb0b30f..9cbe76c3aa3 100644 --- a/arch/i386/Kconfig.cpu +++ b/arch/i386/Kconfig.cpu @@ -299,7 +299,7 @@ config X86_POPAD_OK config X86_CMPXCHG64 bool - depends on !M386 && !M486 + depends on X86_PAE default y config X86_ALIGNMENT_16 @@ -344,8 +344,8 @@ config X86_CMOV depends on (MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7) default y -config X86_MINIMUM_CPU_MODEL +config X86_MINIMUM_CPU_FAMILY int - default "4" if X86_XADD || X86_CMPXCHG || X86_BSWAP - default "0" + default "4" if X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK + default "3" diff --git a/arch/i386/Makefile b/arch/i386/Makefile index 6dc5e5d90fe..bd28f9f9b4b 100644 --- a/arch/i386/Makefile +++ b/arch/i386/Makefile @@ -34,7 +34,7 @@ CHECKFLAGS += -D__i386__ CFLAGS += -pipe -msoft-float -mregparm=3 -freg-struct-return # prevent gcc from keeping the stack 16 byte aligned -CFLAGS += -mpreferred-stack-boundary=4 +CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2) # CPU-specific tuning. Anything which can be shared with UML should go here. include $(srctree)/arch/i386/Makefile.cpu diff --git a/arch/i386/boot/Makefile b/arch/i386/boot/Makefile index bfbc32098a4..08678a0a3d1 100644 --- a/arch/i386/boot/Makefile +++ b/arch/i386/boot/Makefile @@ -25,27 +25,56 @@ SVGA_MODE := -DSVGA_MODE=NORMAL_VGA #RAMDISK := -DRAMDISK=512 -targets := vmlinux.bin bootsect bootsect.o \ - setup setup.o zImage bzImage +targets := vmlinux.bin setup.bin setup.elf zImage bzImage subdir- := compressed +setup-y += a20.o apm.o cmdline.o copy.o cpu.o cpucheck.o edd.o +setup-y += header.o main.o mca.o memory.o pm.o pmjump.o +setup-y += printf.o string.o tty.o video.o version.o voyager.o + +# The link order of the video-*.o modules can matter. In particular, +# video-vga.o *must* be listed first, followed by video-vesa.o. +# Hardware-specific drivers should follow in the order they should be +# probed, and video-bios.o should typically be last. +setup-y += video-vga.o +setup-y += video-vesa.o +setup-y += video-bios.o + hostprogs-y := tools/build HOSTCFLAGS_build.o := $(LINUXINCLUDE) # --------------------------------------------------------------------------- +# How to compile the 16-bit code. Note we always compile for -march=i386, +# that way we can complain to the user if the CPU is insufficient. +cflags-i386 := +cflags-x86_64 := -m32 +CFLAGS := $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \ + $(cflags-$(ARCH)) \ + -Wall -Wstrict-prototypes \ + -march=i386 -mregparm=3 \ + -include $(srctree)/$(src)/code16gcc.h \ + -fno-strict-aliasing -fomit-frame-pointer \ + $(call cc-option, -ffreestanding) \ + $(call cc-option, -fno-toplevel-reorder,\ + $(call cc-option, -fno-unit-at-a-time)) \ + $(call cc-option, -fno-stack-protector) \ + $(call cc-option, -mpreferred-stack-boundary=2) +AFLAGS := $(CFLAGS) -D__ASSEMBLY__ + $(obj)/zImage: IMAGE_OFFSET := 0x1000 $(obj)/zImage: EXTRA_AFLAGS := $(SVGA_MODE) $(RAMDISK) $(obj)/bzImage: IMAGE_OFFSET := 0x100000 +$(obj)/bzImage: EXTRA_CFLAGS := -D__BIG_KERNEL__ $(obj)/bzImage: EXTRA_AFLAGS := $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__ $(obj)/bzImage: BUILDFLAGS := -b quiet_cmd_image = BUILD $@ -cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/bootsect $(obj)/setup \ +cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/setup.bin \ $(obj)/vmlinux.bin $(ROOT_DEV) > $@ -$(obj)/zImage $(obj)/bzImage: $(obj)/bootsect $(obj)/setup \ +$(obj)/zImage $(obj)/bzImage: $(obj)/setup.bin \ $(obj)/vmlinux.bin $(obj)/tools/build FORCE $(call if_changed,image) @echo 'Kernel: $@ is ready' ' (#'`cat .version`')' @@ -53,12 +82,17 @@ $(obj)/zImage $(obj)/bzImage: $(obj)/bootsect $(obj)/setup \ $(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE $(call if_changed,objcopy) -LDFLAGS_bootsect := -Ttext 0x0 -s --oformat binary -LDFLAGS_setup := -Ttext 0x0 -s --oformat binary -e begtext +SETUP_OBJS = $(addprefix $(obj)/,$(setup-y)) -$(obj)/setup $(obj)/bootsect: %: %.o FORCE +LDFLAGS_setup.elf := -T +$(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE $(call if_changed,ld) +OBJCOPYFLAGS_setup.bin := -O binary + +$(obj)/setup.bin: $(obj)/setup.elf FORCE + $(call if_changed,objcopy) + $(obj)/compressed/vmlinux: FORCE $(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@ diff --git a/arch/i386/boot/a20.c b/arch/i386/boot/a20.c new file mode 100644 index 00000000000..31348d054fc --- /dev/null +++ b/arch/i386/boot/a20.c @@ -0,0 +1,161 @@ +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * This file is part of the Linux kernel, and is made available under + * the terms of the GNU General Public License version 2. + * + * ----------------------------------------------------------------------- */ + +/* + * arch/i386/boot/a20.c + * + * Enable A20 gate (return -1 on failure) + */ + +#include "boot.h" + +#define MAX_8042_LOOPS 100000 + +static int empty_8042(void) +{ + u8 status; + int loops = MAX_8042_LOOPS; + + while (loops--) { + io_delay(); + + status = inb(0x64); + if (status & 1) { + /* Read and discard input data */ + io_delay(); + (void)inb(0x60); + } else if (!(status & 2)) { + /* Buffers empty, finished! */ + return 0; + } + } + + return -1; +} + +/* Returns nonzero if the A20 line is enabled. The memory address + used as a test is the int $0x80 vector, which should be safe. */ + +#define A20_TEST_ADDR (4*0x80) +#define A20_TEST_SHORT 32 +#define A20_TEST_LONG 2097152 /* 2^21 */ + +static int a20_test(int loops) +{ + int ok = 0; + int saved, ctr; + + set_fs(0x0000); + set_gs(0xffff); + + saved = ctr = rdfs32(A20_TEST_ADDR); + + while (loops--) { + wrfs32(++ctr, A20_TEST_ADDR); + io_delay(); /* Serialize and make delay constant */ + ok = rdgs32(A20_TEST_ADDR+0x10) ^ ctr; + if (ok) + break; + } + + wrfs32(saved, A20_TEST_ADDR); + return ok; +} + +/* Quick test to see if A20 is already enabled */ +static int a20_test_short(void) +{ + return a20_test(A20_TEST_SHORT); +} + +/* Longer test that actually waits for A20 to come on line; this + is useful when dealing with the KBC or other slow external circuitry. */ +static int a20_test_long(void) +{ + return a20_test(A20_TEST_LONG); +} + +static void enable_a20_bios(void) +{ + asm volatile("pushfl; int $0x15; popfl" + : : "a" ((u16)0x2401)); +} + +static void enable_a20_kbc(void) +{ + empty_8042(); + + outb(0xd1, 0x64); /* Command write */ + empty_8042(); + + outb(0xdf, 0x60); /* A20 on */ + empty_8042(); +} + +static void enable_a20_fast(void) +{ + u8 port_a; + + port_a = inb(0x92); /* Configuration port A */ + port_a |= 0x02; /* Enable A20 */ + port_a &= ~0x01; /* Do not reset machine */ + outb(port_a, 0x92); +} + +/* + * Actual routine to enable A20; return 0 on ok, -1 on failure + */ + +#define A20_ENABLE_LOOPS 255 /* Number of times to try */ + +int enable_a20(void) +{ + int loops = A20_ENABLE_LOOPS; + +#if defined(CONFIG_X86_ELAN) + /* Elan croaks if we try to touch the KBC */ + enable_a20_fast(); + while (!a20_test_long()) + ; + return 0; +#elif defined(CONFIG_X86_VOYAGER) + /* On Voyager, a20_test() is unsafe? */ + enable_a20_kbc(); + return 0; +#else + while (loops--) { + /* First, check to see if A20 is already enabled + (legacy free, etc.) */ + if (a20_test_short()) + return 0; + + /* Next, try the BIOS (INT 0x15, AX=0x2401) */ + enable_a20_bios(); + if (a20_test_short()) + return 0; + + /* Try enabling A20 through the keyboard controller */ + empty_8042(); + if (a20_test_short()) + return 0; /* BIOS worked, but with delayed reaction */ + + enable_a20_kbc(); + if (a20_test_long()) + return 0; + + /* Finally, try enabling the "fast A20 gate" */ + enable_a20_fast(); + if (a20_test_long()) + return 0; + } + + return -1; +#endif +} diff --git a/arch/i386/boot/apm.c b/arch/i386/boot/apm.c new file mode 100644 index 00000000000..a34087c370c --- /dev/null +++ b/arch/i386/boot/apm.c @@ -0,0 +1,97 @@ +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * Original APM BIOS checking by Stephen Rothwell, May 1994 + * (sfr@canb.auug.org.au) + * + * This file is part of the Linux kernel, and is made available under + * the terms of the GNU General Public License version 2. + * + * ----------------------------------------------------------------------- */ + +/* + * arch/i386/boot/apm.c + * + * Get APM BIOS information + */ + +#include "boot.h" + +#if defined(CONFIG_APM) || defined(CONFIG_APM_MODULE) + +int query_apm_bios(void) +{ + u16 ax, bx, cx, dx, di; + u32 ebx, esi; + u8 err; + + /* APM BIOS installation check */ + ax = 0x5300; + bx = cx = 0; + asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp ; setc %0" + : "=d" (err), "+a" (ax), "+b" (bx), "+c" (cx) + : : "esi", "edi"); + + if (err) + return -1; /* No APM BIOS */ + + if (bx != 0x504d) /* "PM" signature */ + return -1; + + if (cx & 0x02) /* 32 bits supported? */ + return -1; + + /* Disconnect first, just in case */ + ax = 0x5304; + asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp" |