aboutsummaryrefslogtreecommitdiff
path: root/arch/i386/pci/i386.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/i386/pci/i386.c')
-rw-r--r--arch/i386/pci/i386.c315
1 files changed, 0 insertions, 315 deletions
diff --git a/arch/i386/pci/i386.c b/arch/i386/pci/i386.c
deleted file mode 100644
index bcd2f94b732..00000000000
--- a/arch/i386/pci/i386.c
+++ /dev/null
@@ -1,315 +0,0 @@
-/*
- * Low-Level PCI Access for i386 machines
- *
- * Copyright 1993, 1994 Drew Eckhardt
- * Visionary Computing
- * (Unix and Linux consulting and custom programming)
- * Drew@Colorado.EDU
- * +1 (303) 786-7975
- *
- * Drew's work was sponsored by:
- * iX Multiuser Multitasking Magazine
- * Hannover, Germany
- * hm@ix.de
- *
- * Copyright 1997--2000 Martin Mares <mj@ucw.cz>
- *
- * For more information, please consult the following manuals (look at
- * http://www.pcisig.com/ for how to get them):
- *
- * PCI BIOS Specification
- * PCI Local Bus Specification
- * PCI to PCI Bridge Specification
- * PCI System Design Guide
- *
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/errno.h>
-
-#include "pci.h"
-
-/*
- * We need to avoid collisions with `mirrored' VGA ports
- * and other strange ISA hardware, so we always want the
- * addresses to be allocated in the 0x000-0x0ff region
- * modulo 0x400.
- *
- * Why? Because some silly external IO cards only decode
- * the low 10 bits of the IO address. The 0x00-0xff region
- * is reserved for motherboard devices that decode all 16
- * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
- * but we want to try to avoid allocating at 0x2900-0x2bff
- * which might have be mirrored at 0x0100-0x03ff..
- */
-void
-pcibios_align_resource(void *data, struct resource *res,
- resource_size_t size, resource_size_t align)
-{
- if (res->flags & IORESOURCE_IO) {
- resource_size_t start = res->start;
-
- if (start & 0x300) {
- start = (start + 0x3ff) & ~0x3ff;
- res->start = start;
- }
- }
-}
-
-
-/*
- * Handle resources of PCI devices. If the world were perfect, we could
- * just allocate all the resource regions and do nothing more. It isn't.
- * On the other hand, we cannot just re-allocate all devices, as it would
- * require us to know lots of host bridge internals. So we attempt to
- * keep as much of the original configuration as possible, but tweak it
- * when it's found to be wrong.
- *
- * Known BIOS problems we have to work around:
- * - I/O or memory regions not configured
- * - regions configured, but not enabled in the command register
- * - bogus I/O addresses above 64K used
- * - expansion ROMs left enabled (this may sound harmless, but given
- * the fact the PCI specs explicitly allow address decoders to be
- * shared between expansion ROMs and other resource regions, it's
- * at least dangerous)
- *
- * Our solution:
- * (1) Allocate resources for all buses behind PCI-to-PCI bridges.
- * This gives us fixed barriers on where we can allocate.
- * (2) Allocate resources for all enabled devices. If there is
- * a collision, just mark the resource as unallocated. Also
- * disable expansion ROMs during this step.
- * (3) Try to allocate resources for disabled devices. If the
- * resources were assigned correctly, everything goes well,
- * if they weren't, they won't disturb allocation of other
- * resources.
- * (4) Assign new addresses to resources which were either
- * not configured at all or misconfigured. If explicitly
- * requested by the user, configure expansion ROM address
- * as well.
- */
-
-static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
-{
- struct pci_bus *bus;
- struct pci_dev *dev;
- int idx;
- struct resource *r, *pr;
-
- /* Depth-First Search on bus tree */
- list_for_each_entry(bus, bus_list, node) {
- if ((dev = bus->self)) {
- for (idx = PCI_BRIDGE_RESOURCES;
- idx < PCI_NUM_RESOURCES; idx++) {
- r = &dev->resource[idx];
- if (!r->flags)
- continue;
- pr = pci_find_parent_resource(dev, r);
- if (!r->start || !pr ||
- request_resource(pr, r) < 0) {
- printk(KERN_ERR "PCI: Cannot allocate "
- "resource region %d "
- "of bridge %s\n",
- idx, pci_name(dev));
- /*
- * Something is wrong with the region.
- * Invalidate the resource to prevent
- * child resource allocations in this
- * range.
- */
- r->flags = 0;
- }
- }
- }
- pcibios_allocate_bus_resources(&bus->children);
- }
-}
-
-static void __init pcibios_allocate_resources(int pass)
-{
- struct pci_dev *dev = NULL;
- int idx, disabled;
- u16 command;
- struct resource *r, *pr;
-
- for_each_pci_dev(dev) {
- pci_read_config_word(dev, PCI_COMMAND, &command);
- for (idx = 0; idx < PCI_ROM_RESOURCE; idx++) {
- r = &dev->resource[idx];
- if (r->parent) /* Already allocated */
- continue;
- if (!r->start) /* Address not assigned at all */
- continue;
- if (r->flags & IORESOURCE_IO)
- disabled = !(command & PCI_COMMAND_IO);
- else
- disabled = !(command & PCI_COMMAND_MEMORY);
- if (pass == disabled) {
- DBG("PCI: Resource %08lx-%08lx "
- "(f=%lx, d=%d, p=%d)\n",
- r->start, r->end, r->flags, disabled, pass);
- pr = pci_find_parent_resource(dev, r);
- if (!pr || request_resource(pr, r) < 0) {
- printk(KERN_ERR "PCI: Cannot allocate "
- "resource region %d "
- "of device %s\n",
- idx, pci_name(dev));
- /* We'll assign a new address later */
- r->end -= r->start;
- r->start = 0;
- }
- }
- }
- if (!pass) {
- r = &dev->resource[PCI_ROM_RESOURCE];
- if (r->flags & IORESOURCE_ROM_ENABLE) {
- /* Turn the ROM off, leave the resource region,
- * but keep it unregistered. */
- u32 reg;
- DBG("PCI: Switching off ROM of %s\n",
- pci_name(dev));
- r->flags &= ~IORESOURCE_ROM_ENABLE;
- pci_read_config_dword(dev,
- dev->rom_base_reg, &reg);
- pci_write_config_dword(dev, dev->rom_base_reg,
- reg & ~PCI_ROM_ADDRESS_ENABLE);
- }
- }
- }
-}
-
-static int __init pcibios_assign_resources(void)
-{
- struct pci_dev *dev = NULL;
- struct resource *r, *pr;
-
- if (!(pci_probe & PCI_ASSIGN_ROMS)) {
- /*
- * Try to use BIOS settings for ROMs, otherwise let
- * pci_assign_unassigned_resources() allocate the new
- * addresses.
- */
- for_each_pci_dev(dev) {
- r = &dev->resource[PCI_ROM_RESOURCE];
- if (!r->flags || !r->start)
- continue;
- pr = pci_find_parent_resource(dev, r);
- if (!pr || request_resource(pr, r) < 0) {
- r->end -= r->start;
- r->start = 0;
- }
- }
- }
-
- pci_assign_unassigned_resources();
-
- return 0;
-}
-
-void __init pcibios_resource_survey(void)
-{
- DBG("PCI: Allocating resources\n");
- pcibios_allocate_bus_resources(&pci_root_buses);
- pcibios_allocate_resources(0);
- pcibios_allocate_resources(1);
-}
-
-/**
- * called in fs_initcall (one below subsys_initcall),
- * give a chance for motherboard reserve resources
- */
-fs_initcall(pcibios_assign_resources);
-
-int pcibios_enable_resources(struct pci_dev *dev, int mask)
-{
- u16 cmd, old_cmd;
- int idx;
- struct resource *r;
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- old_cmd = cmd;
- for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) {
- /* Only set up the requested stuff */
- if (!(mask & (1 << idx)))
- continue;
-
- r = &dev->resource[idx];
- if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
- continue;
- if ((idx == PCI_ROM_RESOURCE) &&
- (!(r->flags & IORESOURCE_ROM_ENABLE)))
- continue;
- if (!r->start && r->end) {
- printk(KERN_ERR "PCI: Device %s not available "
- "because of resource %d collisions\n",
- pci_name(dev), idx);
- return -EINVAL;
- }
- if (r->flags & IORESOURCE_IO)
- cmd |= PCI_COMMAND_IO;
- if (r->flags & IORESOURCE_MEM)
- cmd |= PCI_COMMAND_MEMORY;
- }
- if (cmd != old_cmd) {
- printk("PCI: Enabling device %s (%04x -> %04x)\n",
- pci_name(dev), old_cmd, cmd);
- pci_write_config_word(dev, PCI_COMMAND, cmd);
- }
- return 0;
-}
-
-/*
- * If we set up a device for bus mastering, we need to check the latency
- * timer as certain crappy BIOSes forget to set it properly.
- */
-unsigned int pcibios_max_latency = 255;
-
-void pcibios_set_master(struct pci_dev *dev)
-{
- u8 lat;
- pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
- if (lat < 16)
- lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
- else if (lat > pcibios_max_latency)
- lat = pcibios_max_latency;
- else
- return;
- printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n",
- pci_name(dev), lat);
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
-}
-
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state, int write_combine)
-{
- unsigned long prot;
-
- /* I/O space cannot be accessed via normal processor loads and
- * stores on this platform.
- */
- if (mmap_state == pci_mmap_io)
- return -EINVAL;
-
- /* Leave vm_pgoff as-is, the PCI space address is the physical
- * address on this platform.
- */
- prot = pgprot_val(vma->vm_page_prot);
- if (boot_cpu_data.x86 > 3)
- prot |= _PAGE_PCD | _PAGE_PWT;
- vma->vm_page_prot = __pgprot(prot);
-
- /* Write-combine setting is ignored, it is changed via the mtrr
- * interfaces on this platform.
- */
- if (io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
- vma->vm_end - vma->vm_start,
- vma->vm_page_prot))
- return -EAGAIN;
-
- return 0;
-}
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-01-13 14:35:12 +0000