diff options
Diffstat (limited to 'arch/i386/kernel/cpu/bugs.c')
| -rw-r--r-- | arch/i386/kernel/cpu/bugs.c | 192 |
1 files changed, 0 insertions, 192 deletions
diff --git a/arch/i386/kernel/cpu/bugs.c b/arch/i386/kernel/cpu/bugs.c deleted file mode 100644 index 59266f03d1c..00000000000 --- a/arch/i386/kernel/cpu/bugs.c +++ /dev/null @@ -1,192 +0,0 @@ -/* - * arch/i386/cpu/bugs.c - * - * Copyright (C) 1994 Linus Torvalds - * - * Cyrix stuff, June 1998 by: - * - Rafael R. Reilova (moved everything from head.S), - * <rreilova@ececs.uc.edu> - * - Channing Corn (tests & fixes), - * - Andrew D. Balsa (code cleanup). - */ -#include <linux/init.h> -#include <linux/utsname.h> -#include <asm/bugs.h> -#include <asm/processor.h> -#include <asm/i387.h> -#include <asm/msr.h> -#include <asm/paravirt.h> -#include <asm/alternative.h> - -static int __init no_halt(char *s) -{ - boot_cpu_data.hlt_works_ok = 0; - return 1; -} - -__setup("no-hlt", no_halt); - -static int __init mca_pentium(char *s) -{ - mca_pentium_flag = 1; - return 1; -} - -__setup("mca-pentium", mca_pentium); - -static int __init no_387(char *s) -{ - boot_cpu_data.hard_math = 0; - write_cr0(0xE | read_cr0()); - return 1; -} - -__setup("no387", no_387); - -static double __initdata x = 4195835.0; -static double __initdata y = 3145727.0; - -/* - * This used to check for exceptions.. - * However, it turns out that to support that, - * the XMM trap handlers basically had to - * be buggy. So let's have a correct XMM trap - * handler, and forget about printing out - * some status at boot. - * - * We should really only care about bugs here - * anyway. Not features. - */ -static void __init check_fpu(void) -{ - if (!boot_cpu_data.hard_math) { -#ifndef CONFIG_MATH_EMULATION - printk(KERN_EMERG "No coprocessor found and no math emulation present.\n"); - printk(KERN_EMERG "Giving up.\n"); - for (;;) ; -#endif - return; - } - -/* trap_init() enabled FXSR and company _before_ testing for FP problems here. */ - /* Test for the divl bug.. */ - __asm__("fninit\n\t" - "fldl %1\n\t" - "fdivl %2\n\t" - "fmull %2\n\t" - "fldl %1\n\t" - "fsubp %%st,%%st(1)\n\t" - "fistpl %0\n\t" - "fwait\n\t" - "fninit" - : "=m" (*&boot_cpu_data.fdiv_bug) - : "m" (*&x), "m" (*&y)); - if (boot_cpu_data.fdiv_bug) - printk("Hmm, FPU with FDIV bug.\n"); -} - -static void __init check_hlt(void) -{ - if (paravirt_enabled()) - return; - - printk(KERN_INFO "Checking 'hlt' instruction... "); - if (!boot_cpu_data.hlt_works_ok) { - printk("disabled\n"); - return; - } - halt(); - halt(); - halt(); - halt(); - printk("OK.\n"); -} - -/* - * Most 386 processors have a bug where a POPAD can lock the - * machine even from user space. - */ - -static void __init check_popad(void) -{ -#ifndef CONFIG_X86_POPAD_OK - int res, inp = (int) &res; - - printk(KERN_INFO "Checking for popad bug... "); - __asm__ __volatile__( - "movl $12345678,%%eax; movl $0,%%edi; pusha; popa; movl (%%edx,%%edi),%%ecx " - : "=&a" (res) - : "d" (inp) - : "ecx", "edi" ); - /* If this fails, it means that any user program may lock the CPU hard. Too bad. */ - if (res != 12345678) printk( "Buggy.\n" ); - else printk( "OK.\n" ); -#endif -} - -/* - * Check whether we are able to run this kernel safely on SMP. - * - * - In order to run on a i386, we need to be compiled for i386 - * (for due to lack of "invlpg" and working WP on a i386) - * - In order to run on anything without a TSC, we need to be - * compiled for a i486. - * - In order to support the local APIC on a buggy Pentium machine, - * we need to be compiled with CONFIG_X86_GOOD_APIC disabled, - * which happens implicitly if compiled for a Pentium or lower - * (unless an advanced selection of CPU features is used) as an - * otherwise config implies a properly working local APIC without - * the need to do extra reads from the APIC. -*/ - -static void __init check_config(void) -{ -/* - * We'd better not be a i386 if we're configured to use some - * i486+ only features! (WP works in supervisor mode and the - * new "invlpg" and "bswap" instructions) - */ -#if defined(CONFIG_X86_WP_WORKS_OK) || defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_BSWAP) - if (boot_cpu_data.x86 == 3) - panic("Kernel requires i486+ for 'invlpg' and other features"); -#endif - -/* - * If we configured ourselves for a TSC, we'd better have one! - */ -#ifdef CONFIG_X86_TSC - if (!cpu_has_tsc && !tsc_disable) - panic("Kernel compiled for Pentium+, requires TSC feature!"); -#endif - -/* - * If we were told we had a good local APIC, check for buggy Pentia, - * i.e. all B steppings and the C2 stepping of P54C when using their - * integrated APIC (see 11AP erratum in "Pentium Processor - * Specification Update"). - */ -#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_GOOD_APIC) - if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL - && cpu_has_apic - && boot_cpu_data.x86 == 5 - && boot_cpu_data.x86_model == 2 - && (boot_cpu_data.x86_mask < 6 || boot_cpu_data.x86_mask == 11)) - panic("Kernel compiled for PMMX+, assumes a local APIC without the read-before-write bug!"); -#endif -} - - -void __init check_bugs(void) -{ - identify_boot_cpu(); -#ifndef CONFIG_SMP - printk("CPU: "); - print_cpu_info(&boot_cpu_data); -#endif - check_config(); - check_fpu(); - check_hlt(); - check_popad(); - init_utsname()->machine[1] = '0' + (boot_cpu_data.x86 > 6 ? 6 : boot_cpu_data.x86); - alternative_instructions(); -} |