diff options
Diffstat (limited to 'arch/h8300')
66 files changed, 0 insertions, 7564 deletions
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig deleted file mode 100644 index 396ab059efa..00000000000 --- a/arch/h8300/Kconfig +++ /dev/null @@ -1,226 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see Documentation/kbuild/kconfig-language.txt. -# - -mainmenu "uClinux/h8300 (w/o MMU) Kernel Configuration" - -config H8300 - bool - default y - select HAVE_IDE - -config MMU - bool - default n - -config SWAP - bool - default n - -config ZONE_DMA - bool - default y - -config FPU - bool - default n - -config RWSEM_GENERIC_SPINLOCK - bool - default y - -config RWSEM_XCHGADD_ALGORITHM - bool - default n - -config ARCH_HAS_ILOG2_U32 - bool - default n - -config ARCH_HAS_ILOG2_U64 - bool - default n - -config GENERIC_FIND_NEXT_BIT - bool - default y - -config GENERIC_HWEIGHT - bool - default y - -config GENERIC_HARDIRQS - bool - default y - -config GENERIC_CALIBRATE_DELAY - bool - default y - -config GENERIC_TIME - bool - default y - -config TIME_LOW_RES - bool - default y - -config ARCH_SUPPORTS_AOUT - def_bool y - -config NO_IOPORT - def_bool y - -config NO_DMA - def_bool y - -config ISA - bool - default y - -config PCI - bool - default n - -config HZ - int - default 100 - -source "init/Kconfig" - -source "arch/h8300/Kconfig.cpu" - -menu "Executable file formats" - -source "fs/Kconfig.binfmt" - -endmenu - -source "net/Kconfig" - -source "drivers/base/Kconfig" - -source "drivers/mtd/Kconfig" - -source "drivers/block/Kconfig" - -source "drivers/ide/Kconfig" - -source "arch/h8300/Kconfig.ide" - -source "drivers/net/Kconfig" - -# -# input - input/joystick depends on it. As does USB. -# -source "drivers/input/Kconfig" - -menu "Character devices" - -config VT - bool "Virtual terminal" - ---help--- - If you say Y here, you will get support for terminal devices with - display and keyboard devices. These are called "virtual" because you - can run several virtual terminals (also called virtual consoles) on - one physical terminal. This is rather useful, for example one - virtual terminal can collect system messages and warnings, another - one can be used for a text-mode user session, and a third could run - an X session, all in parallel. Switching between virtual terminals - is done with certain key combinations, usually Alt-<function key>. - - The setterm command ("man setterm") can be used to change the - properties (such as colors or beeping) of a virtual terminal. The - man page console_codes(4) ("man console_codes") contains the special - character sequences that can be used to change those properties - directly. The fonts used on virtual terminals can be changed with - the setfont ("man setfont") command and the key bindings are defined - with the loadkeys ("man loadkeys") command. - - You need at least one virtual terminal device in order to make use - of your keyboard and monitor. Therefore, only people configuring an - embedded system would want to say N here in order to save some - memory; the only way to log into such a system is then via a serial - or network connection. - - If unsure, say Y, or else you won't be able to do much with your new - shiny Linux system :-) - -config VT_CONSOLE - bool "Support for console on virtual terminal" - depends on VT - ---help--- - The system console is the device which receives all kernel messages - and warnings and which allows logins in single user mode. If you - answer Y here, a virtual terminal (the device used to interact with - a physical terminal) can be used as system console. This is the most - common mode of operations, so you should say Y here unless you want - the kernel messages be output only to a serial port (in which case - you should say Y to "Console on serial port", below). - - If you do say Y here, by default the currently visible virtual - terminal (/dev/tty0) will be used as system console. You can change - that with a kernel command line option such as "console=tty3" which - would use the third virtual terminal as system console. (Try "man - bootparam" or see the documentation of your boot loader (lilo or - loadlin) about how to pass options to the kernel at boot time.) - - If unsure, say Y. - -config HW_CONSOLE - bool - depends on VT && !S390 && !UM - default y - -comment "Unix98 PTY support" - -config UNIX98_PTYS - bool "Unix98 PTY support" - ---help--- - A pseudo terminal (PTY) is a software device consisting of two - halves: a master and a slave. The slave device behaves identical to - a physical terminal; the master device is used by a process to - read data from and write data to the slave, thereby emulating a - terminal. Typical programs for the master side are telnet servers - and xterms. - - Linux has traditionally used the BSD-like names /dev/ptyxx for - masters and /dev/ttyxx for slaves of pseudo terminals. This scheme - has a number of problems. The GNU C library glibc 2.1 and later, - however, supports the Unix98 naming standard: in order to acquire a - pseudo terminal, a process opens /dev/ptmx; the number of the pseudo - terminal is then made available to the process and the pseudo - terminal slave can be accessed as /dev/pts/<number>. What was - traditionally /dev/ttyp2 will then be /dev/pts/2, for example. - - The entries in /dev/pts/ are created on the fly by a virtual - file system; therefore, if you say Y here you should say Y to - "/dev/pts file system for Unix98 PTYs" as well. - - If you want to say Y here, you need to have the C library glibc 2.1 - or later (equal to libc-6.1, check with "ls -l /lib/libc.so.*"). - Read the instructions in <file:Documentation/Changes> pertaining to - pseudo terminals. It's safe to say N. - -source "drivers/char/pcmcia/Kconfig" - -source "drivers/serial/Kconfig" - -source "drivers/i2c/Kconfig" - -source "drivers/hwmon/Kconfig" - -source "drivers/usb/Kconfig" - -endmenu - -source "fs/Kconfig" - -source "arch/h8300/Kconfig.debug" - -source "security/Kconfig" - -source "crypto/Kconfig" - -source "lib/Kconfig" diff --git a/arch/h8300/Kconfig.cpu b/arch/h8300/Kconfig.cpu deleted file mode 100644 index 582797db960..00000000000 --- a/arch/h8300/Kconfig.cpu +++ /dev/null @@ -1,186 +0,0 @@ -menu "Processor type and features" - -choice - prompt "H8/300 platform" - default H8300H_GENERIC - -config H8300H_GENERIC - bool "H8/300H Generic" - help - H8/300H CPU Generic Hardware Support - -config H8300H_AKI3068NET - bool "AE-3068/69" - help - AKI-H8/3068F / AKI-H8/3069F Flashmicom LAN Board Support - More Information. (Japanese Only) - <http://akizukidensi.com/catalog/h8.html> - AE-3068/69 Evaluation Board Support - More Information. - <http://www.microtronique.com/ae3069lan.htm> - -config H8300H_H8MAX - bool "H8MAX" - help - H8MAX Evaluation Board Support - More Information. (Japanese Only) - <http://strawberry-linux.com/h8/index.html> - -config H8300H_SIM - bool "H8/300H Simulator" - help - GDB Simulator Support - More Information. - arch/h8300/Doc/simulator.txt - -config H8S_GENERIC - bool "H8S Generic" - help - H8S CPU Generic Hardware Support - -config H8S_EDOSK2674 - bool "EDOSK-2674" - help - Renesas EDOSK-2674 Evaluation Board Support - More Information. - <http://www.azpower.com/H8-uClinux/index.html> - <http://www.eu.renesas.com/tools/edk/support/edosk2674.html> - -config H8S_SIM - bool "H8S Simulator" - help - GDB Simulator Support - More Information. - arch/h8300/Doc/simulator.txt - -endchoice - -if (H8300H_GENERIC || H8S_GENERIC) -menu "Detail Selection" -if (H8300H_GENERIC) -choice - prompt "CPU Selection" - -config H83002 - bool "H8/3001,3002,3003" - -config H83007 - bool "H8/3006,3007" - -config H83048 - bool "H8/3044,3045,3046,3047,3048,3052" - -config H83068 - bool "H8/3065,3066,3067,3068,3069" -endchoice -endif - -if (H8S_GENERIC) -choice - prompt "CPU Selection" - -config H8S2678 - bool "H8S/2670,2673,2674R,2675,2676" -endchoice -endif - -config CPU_CLOCK - int "CPU Clock Frequency (/1KHz)" - default "20000" - help - CPU Clock Frequency divide to 1000 -endmenu -endif - -if (H8300H_GENERIC || H8S_GENERIC || H8300H_SIM || H8S_SIM || H8S_EDOSK2674) -choice - prompt "Kernel executes from" - ---help--- - Choose the memory type that the kernel will be running in. - -config RAMKERNEL - bool "RAM" - help - The kernel will be resident in RAM when running. - -config ROMKERNEL - bool "ROM" - help - The kernel will be resident in FLASH/ROM when running. - -endchoice -endif - -if (H8300H_AKI3068NET) -config H83068 - bool - default y - -config CPU_CLOCK - int - default "20000" - -config RAMKERNEL - bool - default y -endif - -if (H8300H_H8MAX) -config H83068 - bool - default y - -config CPU_CLOCK - int - default 25000 - -config RAMKERNEL - bool - default y -endif - -if (H8300H_SIM) -config H83007 - bool - default y - -config CPU_CLOCK - int - default "16000" -endif - -if (H8S_EDOSK2674) -config H8S2678 - bool - default y -config CPU_CLOCK - int - default 33000 -endif - -if (H8S_SIM) -config H8S2678 - bool - default y -config CPU_CLOCK - int - default 33000 -endif - -config CPU_H8300H - bool - depends on (H83002 || H83007 || H83048 || H83068) - default y - -config CPU_H8S - bool - depends on H8S2678 - default y - -config PREEMPT - bool "Preemptible Kernel" - default n - -source "mm/Kconfig" - -endmenu diff --git a/arch/h8300/Kconfig.debug b/arch/h8300/Kconfig.debug deleted file mode 100644 index ee671c3f2c7..00000000000 --- a/arch/h8300/Kconfig.debug +++ /dev/null @@ -1,68 +0,0 @@ -menu "Kernel hacking" - -source "lib/Kconfig.debug" - -config FULLDEBUG - bool "Full Symbolic/Source Debugging support" - help - Enable debugging symbols on kernel build. - -config HIGHPROFILE - bool "Use fast second timer for profiling" - help - Use a fast secondary clock to produce profiling information. - -config NO_KERNEL_MSG - bool "Suppress Kernel BUG Messages" - help - Do not output any debug BUG messages within the kernel. - -config GDB_MAGICPRINT - bool "Message Output for GDB MagicPrint service" - depends on (H8300H_SIM || H8S_SIM) - help - kernel messages output using MagicPrint service from GDB - -config SYSCALL_PRINT - bool "SystemCall trace print" - help - output history of systemcall - -config GDB_DEBUG - bool "Use gdb stub" - depends on (!H8300H_SIM && !H8S_SIM) - help - gdb stub exception support - -config SH_STANDARD_BIOS - bool "Use gdb protocol serial console" - depends on (!H8300H_SIM && !H8S_SIM) - help - serial console output using GDB protocol. - Require eCos/RedBoot - -config DEFAULT_CMDLINE - bool "Use builtin commandline" - default n - help - builtin kernel commandline enabled. - -config KERNEL_COMMAND - string "Buildin commmand string" - depends on DEFAULT_CMDLINE - help - builtin kernel commandline strings. - -config BLKDEV_RESERVE - bool "BLKDEV Reserved Memory" - default n - help - Reserved BLKDEV area. - -config BLKDEV_RESERVE_ADDRESS - hex 'start address' - depends on BLKDEV_RESERVE - help - BLKDEV start address. - -endmenu diff --git a/arch/h8300/Kconfig.ide b/arch/h8300/Kconfig.ide deleted file mode 100644 index a38a63054ac..00000000000 --- a/arch/h8300/Kconfig.ide +++ /dev/null @@ -1,44 +0,0 @@ -# uClinux H8/300 Target Board Selection Menu (IDE) - -if (H8300H_AKI3068NET) -menu "IDE Extra configuration" - -config H8300_IDE_BASE - hex "IDE register base address" - depends on IDE - default 0 - help - IDE registers base address - -config H8300_IDE_ALT - hex "IDE register alternate address" - depends on IDE - default 0 - help - IDE alternate registers address - -config H8300_IDE_IRQ - int "IDE IRQ no" - depends on IDE - default 0 - help - IDE use IRQ no -endmenu -endif - -if (H8300H_H8MAX) -config H8300_IDE_BASE - hex - depends on IDE - default 0x200000 - -config H8300_IDE_ALT - hex - depends on IDE - default 0x60000c - -config H8300_IDE_IRQ - int - depends on IDE - default 5 -endif diff --git a/arch/h8300/Makefile b/arch/h8300/Makefile deleted file mode 100644 index a556447877b..00000000000 --- a/arch/h8300/Makefile +++ /dev/null @@ -1,71 +0,0 @@ -# -# arch/h8300/Makefile -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# -# (C) Copyright 2002,2003 Yoshinori Sato <ysato@users.sourceforge.jp> -# - -platform-$(CONFIG_CPU_H8300H) := h8300h -platform-$(CONFIG_CPU_H8S) := h8s -PLATFORM := $(platform-y) - -board-$(CONFIG_H8300H_GENERIC) := generic -board-$(CONFIG_H8300H_AKI3068NET) := aki3068net -board-$(CONFIG_H8300H_H8MAX) := h8max -board-$(CONFIG_H8300H_SIM) := generic -board-$(CONFIG_H8S_GENERIC) := generic -board-$(CONFIG_H8S_EDOSK2674) := edosk2674 -board-$(CONFIG_H8S_SIM) := generic -BOARD := $(board-y) - -model-$(CONFIG_RAMKERNEL) := ram -model-$(CONFIG_ROMKERNEL) := rom -MODEL := $(model-y) - -cflags-$(CONFIG_CPU_H8300H) := -mh -ldflags-$(CONFIG_CPU_H8300H) := -mh8300helf -cflags-$(CONFIG_CPU_H8S) := -ms -ldflags-$(CONFIG_CPU_H8S) := -mh8300self - -KBUILD_CFLAGS += $(cflags-y) -KBUILD_CFLAGS += -mint32 -fno-builtin -KBUILD_CFLAGS += -g -KBUILD_CFLAGS += -D__linux__ -KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\" -KBUILD_AFLAGS += -DPLATFORM=$(PLATFORM) -DMODEL=$(MODEL) $(cflags-y) -LDFLAGS += $(ldflags-y) - -CROSS_COMPILE = h8300-elf- -LIBGCC := $(shell $(CROSS-COMPILE)$(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) - -head-y := arch/$(ARCH)/platform/$(PLATFORM)/$(BOARD)/crt0_$(MODEL).o - -core-y += arch/$(ARCH)/kernel/ \ - arch/$(ARCH)/mm/ -ifdef PLATFORM -core-y += arch/$(ARCH)/platform/$(PLATFORM)/ \ - arch/$(ARCH)/platform/$(PLATFORM)/$(BOARD)/ -endif - -libs-y += arch/$(ARCH)/lib/ $(LIBGCC) - -boot := arch/h8300/boot - -export MODEL PLATFORM BOARD - -archmrproper: - -archclean: - $(Q)$(MAKE) $(clean)=$(boot) - -vmlinux.srec vmlinux.bin zImage: vmlinux - $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ - -define archhelp - @echo 'vmlinux.bin - Create raw binary' - @echo 'vmlinux.srec - Create srec binary' - @echo 'zImage - Compressed kernel image' -endef diff --git a/arch/h8300/README b/arch/h8300/README deleted file mode 100644 index 2fd6f6d7a01..00000000000 --- a/arch/h8300/README +++ /dev/null @@ -1,37 +0,0 @@ -linux-2.6 for H8/300 README -Yoshinori Sato <ysato@users.sourceforge.jp> - -* Supported CPU -H8/300H and H8S - -* Supported Target -1.simulator of GDB - require patches. - -2.AE 3068/AE 3069 - more information - MICROTRONIQUE <http://www.microtronique.com/> - Akizuki Denshi Tsusho Ltd. <http://www.akizuki.ne.jp> (Japanese Only) - -3.H8MAX - see http://ip-sol.jp/h8max/ (Japanese Only) - -4.EDOSK2674 - see http://www.eu.renesas.com/products/mpumcu/tool/edk/support/edosk2674.html - http://www.azpower.com/H8-uClinux/ - -* Toolchain Version -gcc-3.1 or higher and patch -see arch/h8300/tools_patch/README -binutils-2.12 or higher -gdb-5.2 or higher -The environment that can compile a h8300-elf binary is necessary. - -* Userland Develop environment -used h8300-elf toolchains. -see http://www.uclinux.org/pub/uClinux/ports/h8/ - -* A few words of thanks -Porting to H8/300 serieses is support of Information-technology Promotion Agency, Japan. -I thank support. -and All developer/user. diff --git a/arch/h8300/boot/Makefile b/arch/h8300/boot/Makefile deleted file mode 100644 index 0bb62e064ee..00000000000 --- a/arch/h8300/boot/Makefile +++ /dev/null @@ -1,22 +0,0 @@ -# arch/h8300/boot/Makefile - -targets := vmlinux.srec vmlinux.bin zImage -subdir- := compressed - -OBJCOPYFLAGS_vmlinux.srec := -Osrec -OBJCOPYFLAGS_vmlinux.bin := -Obinary -OBJCOPYFLAGS_zImage := -O binary -R .note -R .comment -R .stab -R .stabstr -S - -$(obj)/vmlinux.srec $(obj)/vmlinux.bin: vmlinux FORCE - $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready' - -$(obj)/zImage: $(obj)/compressed/vmlinux FORCE - $(call if_changed,objcopy) - @echo 'Kernel: $@ is ready' - -$(obj)/compressed/vmlinux: FORCE - $(Q)$(MAKE) $(build)=$(obj)/compressed $@ - -CLEAN_FILES += arch/$(ARCH)/vmlinux.bin arch/$(ARCH)/vmlinux.srec - diff --git a/arch/h8300/boot/compressed/Makefile b/arch/h8300/boot/compressed/Makefile deleted file mode 100644 index d6189e057ed..00000000000 --- a/arch/h8300/boot/compressed/Makefile +++ /dev/null @@ -1,37 +0,0 @@ -# -# linux/arch/sh/boot/compressed/Makefile -# -# create a compressed vmlinux image from the original vmlinux -# - -targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o -EXTRA_AFLAGS := -traditional - -OBJECTS = $(obj)/head.o $(obj)/misc.o - -# -# IMAGE_OFFSET is the load offset of the compression loader -# Assign dummy values if these 2 variables are not defined, -# in order to suppress error message. -# -CONFIG_MEMORY_START ?= 0x00400000 -CONFIG_BOOT_LINK_OFFSET ?= 0x00140000 -IMAGE_OFFSET := $(shell printf "0x%08x" $$[$(CONFIG_MEMORY_START)+$(CONFIG_BOOT_LINK_OFFSET)]) - -LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -estartup $(obj)/vmlinux.lds - -$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o FORCE - $(call if_changed,ld) - @: - -$(obj)/vmlinux.bin: vmlinux FORCE - $(call if_changed,objcopy) - -$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE - $(call if_changed,gzip) - -LDFLAGS_piggy.o := -r --format binary --oformat elf32-h8300 -T -OBJCOPYFLAGS := -O binary - -$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE - $(call if_changed,ld) diff --git a/arch/h8300/boot/compressed/head.S b/arch/h8300/boot/compressed/head.S deleted file mode 100644 index 985a81a2435..00000000000 --- a/arch/h8300/boot/compressed/head.S +++ /dev/null @@ -1,47 +0,0 @@ -/* - * linux/arch/h8300/boot/compressed/head.S - * - * Copyright (C) 2006 Yoshinori Sato - */ - - .h8300h -#include <linux/linkage.h> - -#define SRAM_START 0xff4000 - - .section .text.startup - .global startup -startup: - mov.l #SRAM_START+0x8000, sp - mov.l #__sbss, er0 - mov.l #__ebss, er1 - sub.l er0, er1 - shlr er1 - shlr er1 - sub.l er2, er2 -1: - mov.l er2, @er0 - adds #4, er0 - dec.l #1, er1 - bne 1b - jsr @_decompress_kernel - jmp @0x400000 - - .align 9 -fake_headers_as_bzImage: - .word 0 - .ascii "HdrS" ; header signature - .word 0x0202 ; header version number (>= 0x0105) - ; or else old loadlin-1.5 will fail) - .word 0 ; default_switch - .word 0 ; SETUPSEG - .word 0x1000 - .word 0 ; pointing to kernel version string - .byte 0 ; = 0, old one (LILO, Loadlin, - ; 0xTV: T=0 for LILO - ; V = version - .byte 1 ; Load flags bzImage=1 - .word 0x8000 ; size to move, when setup is not - .long 0x100000 ; 0x100000 = default for big kernel - .long 0 ; address of loaded ramdisk image - .long 0 ; its size in bytes diff --git a/arch/h8300/boot/compressed/misc.c b/arch/h8300/boot/compressed/misc.c deleted file mode 100644 index 51ab6cbd030..00000000000 --- a/arch/h8300/boot/compressed/misc.c +++ /dev/null @@ -1,181 +0,0 @@ -/* - * arch/h8300/boot/compressed/misc.c - * - * This is a collection of several routines from gzip-1.0.3 - * adapted for Linux. - * - * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994 - * - * Adapted for h8300 by Yoshinori Sato 2006 - */ - -#include <asm/uaccess.h> - -/* - * gzip declarations - */ - -#define OF(args) args -#define STATIC static - -#undef memset -#undef memcpy -#define memzero(s, n) memset ((s), 0, (n)) - -typedef unsigned char uch; -typedef unsigned short ush; -typedef unsigned long ulg; - -#define WSIZE 0x8000 /* Window size must be at least 32k, */ - /* and a power of two */ - -static uch *inbuf; /* input buffer */ -static uch window[WSIZE]; /* Sliding window buffer */ - -static unsigned insize = 0; /* valid bytes in inbuf */ -static unsigned inptr = 0; /* index of next byte to be processed in inbuf */ -static unsigned outcnt = 0; /* bytes in output buffer */ - -/* gzip flag byte */ -#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */ -#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ -#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ -#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ -#define COMMENT 0x10 /* bit 4 set: file comment present */ -#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ -#define RESERVED 0xC0 /* bit 6,7: reserved */ - -#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf()) - -/* Diagnostic functions */ -#ifdef DEBUG -# define Assert(cond,msg) {if(!(cond)) error(msg);} -# define Trace(x) fprintf x -# define Tracev(x) {if (verbose) fprintf x ;} -# define Tracevv(x) {if (verbose>1) fprintf x ;} -# define Tracec(c,x) {if (verbose && (c)) fprintf x ;} -# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;} -#else -# define Assert(cond,msg) -# define Trace(x) -# define Tracev(x) -# define Tracevv(x) -# define Tracec(c,x) -# define Tracecv(c,x) -#endif - -static int fill_inbuf(void); -static void flush_window(void); -static void error(char *m); - -extern char input_data[]; -extern int input_len; - -static long bytes_out = 0; -static uch *output_data; -static unsigned long output_ptr = 0; - -static void error(char *m); - -int puts(const char *); - -extern int _text; /* Defined in vmlinux.lds.S */ -extern int _end; -static unsigned long free_mem_ptr; -static unsigned long free_mem_end_ptr; - -#define HEAP_SIZE 0x10000 - -#include "../../../../lib/inflate.c" - -#define SCR *((volatile unsigned char *)0xffff8a) -#define TDR *((volatile unsigned char *)0xffff8b) -#define SSR *((volatile unsigned char *)0xffff8c) - -int puts(const char *s) -{ - return 0; -} - -void* memset(void* s, int c, size_t n) -{ - int i; - char *ss = (char*)s; - - for (i=0;i<n;i++) ss[i] = c; - return s; -} - -void* memcpy(void* __dest, __const void* __src, - size_t __n) -{ - int i; - char *d = (char *)__dest, *s = (char *)__src; - - for (i=0;i<__n;i++) d[i] = s[i]; - return __dest; -} - -/* =========================================================================== - * Fill the input buffer. This is called only when the buffer is empty - * and at least one byte is really needed. - */ -static int fill_inbuf(void) -{ - if (insize != 0) { - error("ran out of input data"); - } - - inbuf = input_data; - insize = input_len; - inptr = 1; - return inbuf[0]; -} - -/* =========================================================================== - * Write the output window window[0..outcnt-1] and update crc and bytes_out. - * (Used for the decompressed data only.) - */ -static void flush_window(void) -{ - ulg c = crc; /* temporary variable */ - unsigned n; - uch *in, *out, ch; - - in = window; - out = &output_data[output_ptr]; - for (n = 0; n < outcnt; n++) { - ch = *out++ = *in++; - c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); - } - crc = c; - bytes_out += (ulg)outcnt; - output_ptr += (ulg)outcnt; - outcnt = 0; -} - -static void error(char *x) -{ - puts("\n\n"); - puts(x); - puts("\n\n -- System halted"); - - while(1); /* Halt */ -} - -#define STACK_SIZE (4096) -long user_stack [STACK_SIZE]; -long* stack_start = &user_stack[STACK_SIZE]; - -void decompress_kernel(void) -{ - output_data = 0; - output_ptr = (unsigned long)0x400000; - free_mem_ptr = (unsigned long)&_end; - free_mem_end_ptr = free_mem_ptr + HEAP_SIZE; - - makecrc(); - puts("Uncompressing Linux... "); - gunzip(); - puts("Ok, booting the kernel.\n"); -} diff --git a/arch/h8300/boot/compressed/vmlinux.lds b/arch/h8300/boot/compressed/vmlinux.lds deleted file mode 100644 index 65e2a0d1ae3..00000000000 --- a/arch/h8300/boot/compressed/vmlinux.lds +++ /dev/null @@ -1,32 +0,0 @@ -SECTIONS -{ - .text : - { - __stext = . ; - __text = .; - *(.text.startup) - *(.text) - __etext = . ; - } - - .rodata : - { - *(.rodata) - } - .data : - - { - __sdata = . ; - ___data_start = . ; - *(.data.*) - } - .bss : - { - . = ALIGN(0x4) ; - __sbss = . ; - *(.bss*) - . = ALIGN(0x4) ; - __ebss = . ; - __end = . ; - } -} diff --git a/arch/h8300/boot/compressed/vmlinux.scr b/arch/h8300/boot/compressed/vmlinux.scr deleted file mode 100644 index a0f6962736e..00000000000 --- a/arch/h8300/boot/compressed/vmlinux.scr +++ /dev/null @@ -1,9 +0,0 @@ -SECTIONS -{ - .data : { - _input_len = .; - LONG(_input_data_end - _input_data) _input_data = .; - *(.data) - _input_data_end = .; - } -} diff --git a/arch/h8300/defconfig b/arch/h8300/defconfig deleted file mode 100644 index 8901cdb5e75..00000000000 --- a/arch/h8300/defconfig +++ /dev/null @@ -1,373 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc1 -# Fri Feb 15 17:13:14 2008 -# -CONFIG_H8300=y -# CONFIG_MMU is not set -# CONFIG_SWAP is not set -CONFIG_ZONE_DMA=y -# CONFIG_FPU is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_TIME=y -CONFIG_TIME_LOW_RES=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_NO_IOPORT=y -CONFIG_NO_DMA=y -CONFIG_ISA=y -# CONFIG_PCI is not set -CONFIG_HZ=100 -CONFIG_C_SYMBOL_PREFIX=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SYSVIPC is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_SYSFS_DEPRECATED is not set -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -# CONFIG_UID16 is not set -# CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_KALLSYMS is not set -# CONFIG_HOTPLUG is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set -# CONFIG_BASE_FULL is not set -# CONFIG_FUTEX is not set -# CONFIG_EPOLL is not set -# CONFIG_SIGNALFD is not set -# CONFIG_TIMERFD is not set -# CONFIG_EVENTFD is not set -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_SLAB is not set -# CONFIG_SLUB is not set -CONFIG_SLOB=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_KPROBES is not set -CONFIG_TINY_SHMEM=y -CONFIG_BASE_SMALL=1 -# CONFIG_MODULES is not set -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -CONFIG_DEFAULT_NOOP=y -CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set - -# -# Processor type and features -# -CONFIG_H8300H_GENERIC=y -# CONFIG_H8300H_AKI3068NET is not set -# CONFIG_H8300H_H8MAX is not set -# CONFIG_H8300H_SIM is not set -# CONFIG_H8S_GENERIC is not set -# CONFIG_H8S_EDOSK2674 is not set -# CONFIG_H8S_SIM is not set - -# -# Detail Selection -# -# CONFIG_H83002 is not set -CONFIG_H83007=y -# CONFIG_H83048 is not set -# CONFIG_H83068 is not set -CONFIG_CPU_CLOCK=20000 -CONFIG_RAMKERNEL=y -# CONFIG_ROMKERNEL is not set -CONFIG_CPU_H8300H=y -# CONFIG_PREEMPT is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_VIRT_TO_BUS=y - -# -# Executable file formats -# -CONFIG_BINFMT_FLAT=y -CONFIG_BINFMT_ZFLAT=y -# CONFIG_BINFMT_SHARED_FLAT is not set -CONFIG_BINFMT_MISC=y - -# -# Networking -# -# CONFIG_NET is not set - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_SYS_HYPERVISOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set -# CONFIG_MTD_CMDLINE_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -# CONFIG_MTD_BLKDEVS is not set -# CONFIG_MTD_BLOCK is not set -# CONFIG_MTD_BLOCK_RO is not set -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_RAM=y -CONFIG_MTD_ROM=y -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_UCLINUX=y -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_BLK_DEV is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set - -# -# Unix98 PTY support -# -# CONFIG_UNIX98_PTYS is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=2 -CONFIG_SERIAL_SH_SCI_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_I2C is not set -# CONFIG_HWMON is not set -# CONFIG_USB_SUPPORT is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -# CONFIG_TMPFS is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -CONFIG_ROMFS_FS=y -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_SAMPLES is not set -# CONFIG_FULLDEBUG is not set -# CONFIG_HIGHPROFILE is not set -# CONFIG_NO_KERNEL_MSG is not set -# CONFIG_SYSCALL_PRINT is not set -# CONFIG_GDB_DEBUG is not set -# CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_DEFAULT_CMDLINE is not set -# CONFIG_BLKDEV_RESERVE is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -# CONFIG_CRC32 is not set -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_HAS_IOMEM=y diff --git a/arch/h8300/kernel/Makefile b/arch/h8300/kernel/Makefile deleted file mode 100644 index 6c248c3c5c3..00000000000 --- a/arch/h8300/kernel/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# -# Makefile for the linux kernel. -# - -extra-y := vmlinux.lds - -obj-y := process.o traps.o ptrace.o irq.o \ - sys_h8300.o time.o signal.o \ - setup.o gpio.o init_task.o syscalls.o \ - entry.o - -obj-$(CONFIG_MODULES) += module.o h8300_ksyms.o diff --git a/arch/h8300/kernel/asm-offsets.c b/arch/h8300/kernel/asm-offsets.c deleted file mode 100644 index 2042552e087..00000000000 --- a/arch/h8300/kernel/asm-offsets.c +++ /dev/null @@ -1,61 +0,0 @@ -/* - * This program is used to generate definitions needed by - * assembly language modules. - * - * We use the technique used in the OSF Mach kernel code: - * generate asm statements containing #defines, - * compile this file to assembler, and then extract the - * #defines from the assembly-language output. - */ - -#include <linux/stddef.h> -#include <linux/sched.h> -#include <linux/kernel_stat.h> -#include <linux/ptrace.h> -#include <linux/hardirq.h> -#include <linux/kbuild.h> -#include <asm/bootinfo.h> -#include <asm/irq.h> -#include <asm/ptrace.h> - -int main(void) -{ - /* offsets into the task struct */ - DEFINE(TASK_STATE, offsetof(struct task_struct, state)); - DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags)); - DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace)); - DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked)); - DEFINE(TASK_THREAD, offsetof(struct task_struct, thread)); - DEFINE(TASK_THREAD_INFO, offsetof(struct task_struct, stack)); - DEFINE(TASK_MM, offsetof(struct task_struct, mm)); - DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm)); - - /* offsets into the irq_cpustat_t struct */ - DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending)); - - /* offsets into the thread struct */ - DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp)); - DEFINE(THREAD_USP, offsetof(struct thread_struct, usp)); - DEFINE(THREAD_CCR, offsetof(struct thread_struct, ccr)); - - /* offsets into the pt_regs struct */ - DEFINE(LER0, offsetof(struct pt_regs, er0) - sizeof(long)); - DEFINE(LER1, offsetof(struct pt_regs, er1) - sizeof(long)); - DEFINE(LER2, offsetof(struct pt_regs, er2) - sizeof(long)); - DEFINE(LER3, offsetof(struct pt_regs, er3) - sizeof(long)); - DEFINE(LER4, offsetof(struct pt_regs, er4) - sizeof(long)); - DEFINE(LER5, offsetof(struct pt_regs, er5) - sizeof(long)); - DEFINE(LER6, offsetof(struct pt_regs, er6) - sizeof(long)); - DEFINE(LORIG, offsetof(struct pt_regs, orig_er0) - sizeof(long)); - DEFINE(LCCR, offsetof(struct pt_regs, ccr) - sizeof(long)); - DEFINE(LVEC, offsetof(struct pt_regs, vector) - sizeof(long)); -#if defined(__H8300S__) - DEFINE(LEXR, offsetof(struct pt_regs, exr) - sizeof(long)); -#endif - DEFINE(LRET, offsetof(struct pt_regs, pc) - sizeof(long)); - - DEFINE(PT_PTRACED, PT_PTRACED); - DEFINE(PT_DTRACE, PT_DTRACE); - - return 0; -} diff --git a/arch/h8300/kernel/entry.S b/arch/h8300/kernel/entry.S deleted file mode 100644 index ca743169030..00000000000 --- a/arch/h8300/kernel/entry.S +++ /dev/null @@ -1,393 +0,0 @@ -/* -*- mode: asm -*- - * - * linux/arch/h8300/platform/h8300h/entry.S - * - * Yoshinori Sato <ysato@users.sourceforge.jp> - * David McCullough <davidm@snapgear.com> - * - */ - -/* - * entry.S - * include exception/interrupt gateway - * system call entry - */ - -#include <linux/sys.h> -#include <asm/unistd.h> -#include <asm/setup.h> -#include <asm/segment.h> -#include <asm/linkage.h> -#include <asm/asm-offsets.h> -#include <asm/thread_info.h> -#include <asm/errno.h> - -#if defined(CONFIG_CPU_H8300H) -#define USERRET 8 -INTERRUPTS = 64 - .h8300h - .macro SHLL2 reg - shll.l \reg - shll.l \reg - .endm - .macro SHLR2 reg - shlr.l \reg - shlr.l \reg - .endm - .macro SAVEREGS - mov.l er0,@-sp - mov.l er1,@-sp - mov.l er2,@-sp - mov.l er3,@-sp - .endm - .macro RESTOREREGS - mov.l @sp+,er3 - mov.l @sp+,er2 - .endm - .macro SAVEEXR - .endm - .macro RESTOREEXR - .endm -#endif -#if defined(CONFIG_CPU_H8S) -#define USERRET 10 -#define USEREXR 8 -INTERRUPTS = 128 - .h8300s - .macro SHLL2 reg - shll.l #2,\reg - .endm - .macro SHLR2 reg - shlr.l #2,\reg - .endm - .macro SAVEREGS - stm.l er0-er3,@-sp - .endm - .macro RESTOREREGS - ldm.l @sp+,er2-er3 - .endm - .macro SAVEEXR - mov.w @(USEREXR:16,er0),r1 - mov.w r1,@(LEXR-LER3:16,sp) /* copy EXR */ - .endm - .macro RESTOREEXR - mov.w @(LEXR-LER1:16,sp),r1 /* restore EXR */ - mov.b r1l,r1h - mov.w r1,@(USEREXR:16,er0) - .endm -#endif - - -/* CPU context save/restore macros. */ - - .macro SAVE_ALL - mov.l er0,@-sp - stc ccr,r0l /* check kernel mode */ - btst #4,r0l - bne 5f - - /* user mode */ - mov.l sp,@SYMBOL_NAME(sw_usp) - mov.l @sp,er0 /* restore saved er0 */ - orc #0x10,ccr /* switch kernel stack */ - mov.l @SYMBOL_NAME(sw_ksp),sp - sub.l #(LRET-LORIG),sp /* allocate LORIG - LRET */ - SAVEREGS - mov.l @SYMBOL_NAME(sw_usp),er0 - mov.l @(USERRET:16,er0),er1 /* copy the RET addr */ - mov.l er1,@(LRET-LER3:16,sp) - SAVEEXR - - mov.l @(LORIG-LER3:16,sp),er0 - mov.l er0,@(LER0-LER3:16,sp) /* copy ER0 */ - mov.w e1,r1 /* e1 highbyte = ccr */ - and #0xef,r1h /* mask mode? flag */ - bra 6f -5: - /* kernel mode */ - mov.l @sp,er0 /* restore saved er0 */ - subs #2,sp /* set dummy ccr */ - SAVEREGS - mov.w @(LRET-LER3:16,sp),r1 /* copy old ccr */ -6: - mov.b r1h,r1l - mov.b #0,r1h - mov.w r1,@(LCCR-LER3:16,sp) /* set ccr */ - mov.l er6,@-sp /* syscall arg #6 */ - mov.l er5,@-sp /* syscall arg #5 */ - mov.l er4,@-sp /* syscall arg #4 */ - .endm /* r1 = ccr */ - - .macro RESTORE_ALL - mov.l @sp+,er4 - mov.l @sp+,er5 - mov.l @sp+,er6 - RESTOREREGS - mov.w @(LCCR-LER1:16,sp),r0 /* check kernel mode */ - btst #4,r0l - bne 7f - - orc #0x80,ccr - mov.l @SYMBOL_NAME(sw_usp),er0 - mov.l @(LER0-LER1:16,sp),er1 /* restore ER0 */ - mov.l er1,@er0 - RESTOREEXR - mov.w @(LCCR-LER1:16,sp),r1 /* restore the RET addr */ - mov.b r1l,r1h - mov.b @(LRET+1-LER1:16,sp),r1l - mov.w r1,e1 - mov.w @(LRET+2-LER1:16,sp),r1 - mov.l er1,@(USERRET:16,er0) - - mov.l @sp+,er1 - add.l #(LRET-LER1),sp /* remove LORIG - LRET */ - mov.l sp,@SYMBOL_NAME(sw_ksp) - andc #0xef,ccr /* switch to user mode */ - mov.l er0,sp - bra 8f -7: - mov.l @sp+,er1 - adds #4,sp - adds #2,sp -8: - mov.l @sp+,er0 - adds #4,sp /* remove the sw created LVEC */ - rte - .endm - -.globl SYMBOL_NAME(system_call) -.globl SYMBOL_NAME(ret_from_exception) -.globl SYMBOL_NAME(ret_from_fork) -.globl SYMBOL_NAME(ret_from_interrupt) -.globl SYMBOL_NAME(interrupt_redirect_table) -.globl SYMBOL_NAME(sw_ksp),SYMBOL_NAME(sw_usp) -.globl SYMBOL_NAME(resume) -.globl SYMBOL_NAME(interrupt_entry) -.globl SYMBOL_NAME(trace_break) - -#if defined(CONFIG_ROMKERNEL) - .section .int_redirect,"ax" -SYMBOL_NAME_LABEL(interrupt_redirect_table) -#if defined(CONFIG_CPU_H8300H) - .rept 7 - .long 0 - .endr -#endif -#if defined(CONFIG_CPU_H8S) - .rept 5 - .long 0 - .endr - jmp @SYMBOL_NAME(trace_break) - .long 0 -#endif - - jsr @SYMBOL_NAME(interrupt_entry) /* NMI */ - jmp @SYMBOL_NAME(system_call) /* TRAPA #0 (System call) */ - .long 0 - .long 0 - jmp @SYMBOL_NAME(trace_break) /* TRAPA #3 (breakpoint) */ - .rept INTERRUPTS-12 - jsr @SYMBOL_NAME(interrupt_entry) - .endr -#endif -#if defined(CONFIG_RAMKERNEL) -.globl SYMBOL_NAME(interrupt_redirect_table) - .section .bss -SYMBOL_NAME_LABEL(interrupt_redirect_table) - .space 4 -#endif - - .section .text - .align 2 -SYMBOL_NAME_LABEL(interrupt_entry) - SAVE_ALL - mov.l sp,er0 - add.l #LVEC,er0 - btst #4,r1l - bne 1f - /* user LVEC */ - mov.l @SYMBOL_NAME(sw_usp),er0 - adds #4,er0 -1: - mov.l @er0,er0 /* LVEC address */ -#if defined(CONFIG_ROMKERNEL) - sub.l #SYMBOL_NAME(interrupt_redirect_table),er0 -#endif -#if defined(CONFIG_RAMKERNEL) - mov.l @SYMBOL_NAME(interrupt_redirect_table),er1 - sub.l er1,er0 -#endif - SHLR2 er0 - dec.l #1,er0 - mov.l sp,er1 - subs #4,er1 /* adjust ret_pc */ - jsr @SYMBOL_NAME(do_IRQ) - jmp @SYMBOL_NAME(ret_from_interrupt) - -SYMBOL_NAME_LABEL(system_call) - subs #4,sp /* dummy LVEC */ - SAVE_ALL - andc #0x7f,ccr - mov.l er0,er4 - - /* save top of frame */ - mov.l sp,er0 - jsr @SYMBOL_NAME(set_esp0) - mov.l sp,er2 - and.w #0xe000,r2 - mov.b @((TI_FLAGS+3-(TIF_SYSCALL_TRACE >> 3)):16,er2),r2l - btst #(TIF_SYSCALL_TRACE & 7),r2l - beq 1f - jsr @SYMBOL_NAME(do_syscall_trace) -1: - cmp.l #NR_syscalls,er4 - bcc badsys - SHLL2 er4 - mov.l #SYMBOL_NAME(sys_call_table),er0 - add.l er4,er0 - mov.l @er0,er4 - beq SYMBOL_NAME(ret_from_exception):16 - mov.l @(LER1:16,sp),er0 - mov.l @(LER2:16,sp),er1 - mov.l @(LER3:16,sp),er2 - jsr @er4 - mov.l er0,@(LER0:16,sp) /* save the return value */ - mov.l sp,er2 - and.w #0xe000,r2 - mov.b @((TI_FLAGS+3-(TIF_SYSCALL_TRACE >> 3)):16,er2),r2l - btst #(TIF_SYSCALL_TRACE & 7),r2l - beq 2f - jsr @SYMBOL_NAME(do_syscall_trace) -2: -#if defined(CONFIG_SYSCALL_PRINT) - jsr @SYMBOL_NAME(syscall_print) -#endif - orc #0x80,ccr - bra resume_userspace - -badsys: - mov.l #-ENOSYS,er0 - mov.l er0,@(LER0:16,sp) - bra resume_userspace - -#if !defined(CONFIG_PREEMPT) -#define resume_kernel restore_all -#endif - -SYMBOL_NAME_LABEL(ret_from_exception) -#if defined(CONFIG_PREEMPT) - orc #0x80,ccr -#endif -SYMBOL_NAME_LABEL(ret_from_interrupt) - mov.b @(LCCR+1:16,sp),r0l - btst #4,r0l - bne resume_kernel:8 /* return from kernel */ -resume_userspace: - andc #0x7f,ccr - mov.l sp,er4 - and.w #0xe000,r4 /* er4 <- current thread info */ - mov.l @(TI_FLAGS:16,er4),er1 - and.l #_TIF_WORK_MASK,er1 - beq restore_all:8 -work_pending: - btst #TIF_NEED_RESCHED,r1l - bne work_resched:8 - /* work notifysig */ - mov.l sp,er0 - subs #4,er0 /* er0: pt_regs */ - jsr @SYMBOL_NAME(do_notify_resume) - bra restore_all:8 -work_resched: - mov.l sp,er0 - jsr @SYMBOL_NAME(set_esp0) - jsr @SYMBOL_NAME(schedule) - bra resume_userspace:8 -restore_all: - RESTORE_ALL /* Does RTE */ - -#if defined(CONFIG_PREEMPT) -resume_kernel: - mov.l @(TI_PRE_COUNT:16,er4),er0 - bne restore_all:8 -need_resched: - mov.l @(TI_FLAGS:16,er4),er0 - btst #TIF_NEED_RESCHED,r0l - beq restore_all:8 - mov.b @(LCCR+1:16,sp),r0l /* Interrupt Enabled? */ - bmi restore_all:8 - mov.l #PREEMPT_ACTIVE,er0 - mov.l er0,@(TI_PRE_COUNT:16,er4) - andc #0x7f,ccr - mov.l sp,er0 - jsr @SYMBOL_NAME(set_esp0) - jsr @SYMBOL_NAME(schedule) - orc #0x80,ccr - bra need_resched:8 -#endif - -SYMBOL_NAME_LABEL(ret_from_fork) - mov.l er2,er0 - jsr @SYMBOL_NAME(schedule_tail) - jmp @SYMBOL_NAME(ret_from_exception) - -SYMBOL_NAME_LABEL(resume) - /* - * Beware - when entering resume, offset of tss is in d1, - * prev (the current task) is in a0, next (the new task) - * is in a1 and d2.b is non-zero if the mm structure is - * shared between the tasks, so don't change these - * registers until their contents are no longer needed. - */ - - /* save sr */ - sub.w r3,r3 - stc ccr,r3l - mov.w r3,@(THREAD_CCR+2:16,er0) - - /* disable interrupts */ - orc #0x80,ccr - mov.l @SYMBOL_NAME(sw_usp),er3 - mov.l er3,@(THREAD_USP:16,er0) - mov.l sp,@(THREAD_KSP:16,er0) - - /* Skip address space switching if they are the same. */ - /* FIXME: what did we hack out of here, this does nothing! */ - - mov.l @(THREAD_USP:16,er1),er0 - mov.l er0,@SYMBOL_NAME(sw_usp) - mov.l @(THREAD_KSP:16,er1),sp - - /* restore status register */ - mov.w @(THREAD_CCR+2:16,er1),r3 - - ldc r3l,ccr - rts - -SYMBOL_NAME_LABEL(trace_break) - subs #4,sp - SAVE_ALL - sub.l er1,er1 - dec.l #1,er1 - mov.l er1,@(LORIG,sp) - mov.l sp,er0 - jsr @SYMBOL_NAME(set_esp0) - mov.l @SYMBOL_NAME(sw_usp),er0 - mov.l @er0,er1 - mov.w @(-2:16,er1),r2 - cmp.w #0x5730,r2 - beq 1f - subs #2,er1 - mov.l er1,@er0 -1: - and.w #0xff,e1 - mov.l er1,er0 - jsr @SYMBOL_NAME(trace_trap) - jmp @SYMBOL_NAME(ret_from_exception) - - .section .bss -SYMBOL_NAME_LABEL(sw_ksp) - .space 4 -SYMBOL_NAME_LABEL(sw_usp) - .space 4 - - .end diff --git a/arch/h8300/kernel/gpio.c b/arch/h8300/kernel/gpio.c deleted file mode 100644 index 6a25dd5530e..00000000000 --- a/arch/h8300/kernel/gpio.c +++ /dev/null @@ -1,173 +0,0 @@ -/* - * linux/arch/h8300/kernel/gpio.c - * - * Yoshinori Sato <ysato@users.sourceforge.jp> - * - */ - -/* - * Internal I/O Port Management - */ - -#include <linux/stddef.h> -#include <linux/proc_fs.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/fs.h> -#include <linux/init.h> - -#define _(addr) (volatile unsigned char *)(addr) -#if defined(CONFIG_H83007) || defined(CONFIG_H83068) -#include <asm/regs306x.h> -static volatile unsigned char *ddrs[] = { - _(P1DDR),_(P2DDR),_(P3DDR),_(P4DDR),_(P5DDR),_(P6DDR), - NULL, _(P8DDR),_(P9DDR),_(PADDR),_(PBDDR), -}; -#define MAX_PORT 11 -#endif - - #if defined(CONFIG_H83002) || defined(CONFIG_H8048) -/* Fix me!! */ -#include <asm/regs306x.h> -static volatile unsigned char *ddrs[] = { - _(P1DDR),_(P2DDR),_(P3DDR),_(P4DDR),_(P5DDR),_(P6DDR), - NULL, _(P8DDR),_(P9DDR),_(PADDR),_(PBDDR), -}; -#define MAX_PORT 11 -#endif - -#if defined(CONFIG_H8S2678) -#include <asm/regs267x.h> -static volatile unsigned char *ddrs[] = { - _(P1DDR),_(P2DDR),_(P3DDR),NULL ,_(P5DDR),_(P6DDR), - _(P7DDR),_(P8DDR),NULL, _(PADDR),_(PBDDR),_(PCDDR), - _(PDDDR),_(PEDDR),_(PFDDR),_(PGDDR),_(PHDDR), - _(PADDR),_(PBDDR),_(PCDDR),_(PDDDR),_(PEDDR),_(PFDDR), - _(PGDDR),_(PHDDR) -}; -#define MAX_PORT 17 -#endif -#undef _ - -#if !defined(P1DDR) -#error Unsuppoted CPU Selection -#endif - -static struct { - unsigned char used; - unsigned char ddr; -} gpio_regs[MAX_PORT]; - -extern char *_platform_gpio_table(int length); - -int h8300_reserved_gpio(int port, unsigned int bits) -{ - unsigned char *used; - - if (port < 0 || port >= MAX_PORT) - return -1; - used = &(gpio_regs[port].used); - if ((*used & bits) != 0) - return 0; - *used |= bits; - return 1; -} - -int h8300_free_gpio(int port, unsigned int bits) -{ - unsigned char *used; - - if (port < 0 || port >= MAX_PORT) - return -1; - used = &(gpio_regs[port].used); - if ((*used & bits) != bits) - return 0; - *used &= (~bits); - return 1; -} - -int h8300_set_gpio_dir(int port_bit,int dir) -{ - int port = (port_bit >> 8) & 0xff; - int bit = port_bit & 0xff; - - if (ddrs[port] == NULL) - return 0; - if (gpio_regs[port].used & bit) { - if (dir) - gpio_regs[port].ddr |= bit; - else - gpio_regs[port].ddr &= ~bit; - *ddrs[port] = gpio_regs[port].ddr; - return 1; - } else - return 0; -} - -int h8300_get_gpio_dir(int port_bit) -{ - int port = (port_bit >> 8) & 0xff; - int bit = port_bit & 0xff; - - if (ddrs[port] == NULL) - return 0; - if (gpio_regs[port].used & bit) { - return (gpio_regs[port].ddr & bit) != 0; - } else - return -1; -} - -#if defined(CONFIG_PROC_FS) -static char *port_status(int portno) -{ - static char result[10]; - static const char io[2]={'I','O'}; - char *rp; - int c; - unsigned char used,ddr; - - used = gpio_regs[portno].used; - ddr = gpio_regs[portno].ddr; - result[8]='\0'; - rp = result + 7; - for (c = 8; c > 0; c--,rp--,used >>= 1, ddr >>= 1) - if (used & 0x01) - *rp = io[ ddr & 0x01]; - else - *rp = '-'; - return result; -} - -static int gpio_proc_read(char *buf, char **start, off_t offset, - int len, int *unused_i, void *unused_v) -{ - int c,outlen; - static const char port_name[]="123456789ABCDEFGH"; - outlen = 0; - for (c = 0; c < MAX_PORT; c++) { - if (ddrs[c] == NULL) - continue ; - len = sprintf(buf,"P%c: %s\n",port_name[c],port_status(c)); - buf += len; - outlen += len; - } - return outlen; -} - -static __init int register_proc(void) -{ - struct proc_dir_entry *proc_gpio; - - proc_gpio = create_proc_entry("gpio", S_IRUGO, NULL); - if (proc_gpio) - proc_gpio->read_proc = gpio_proc_read; - return proc_gpio != NULL; -} - -__initcall(register_proc); -#endif - -void __init h8300_gpio_init(void) -{ - memcpy(gpio_regs,_platform_gpio_table(sizeof(gpio_regs)),sizeof(gpio_regs)); -} diff --git a/arch/h8300/kernel/h8300_ksyms.c b/arch/h8300/kernel/h8300_ksyms.c deleted file mode 100644 index 6866bd9c7fb..00000000000 --- a/arch/h8300/kernel/h8300_ksyms.c +++ /dev/null @@ -1,101 +0,0 @@ -#include <linux/module.h> -#include <linux/linkage.h> -#include <linux/sched.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/user.h> -#include <linux/elfcore.h> -#include <linux/in6.h> -#include <linux/interrupt.h> - -#include <asm/setup.h> -#include <asm/pgalloc.h> -#include <asm/irq.h> -#include <asm/io.h> -#include <asm/checksum.h> -#include <asm/current.h> -#include <asm/gpio.h> - -//asmlinkage long long __ashrdi3 (long long, int); -//asmlinkage long long __lshrdi3 (long long, int); -extern char h8300_debug_device[]; - -/* platform dependent support */ - -EXPORT_SYMBOL(strnlen); -EXPORT_SYMBOL(strrchr); -EXPORT_SYMBOL(strstr); -EXPORT_SYMBOL(strchr); -EXPORT_SYMBOL(strcat); -EXPORT_SYMBOL(strlen); -EXPORT_SYMBOL(strcmp); -EXPORT_SYMBOL(strncmp); - -EXPORT_SYMBOL(ip_fast_csum); - -EXPORT_SYMBOL(kernel_thread); -EXPORT_SYMBOL(enable_irq); -EXPORT_SYMBOL(disable_irq); - -/* Networking helper routines. */ -EXPORT_SYMBOL(csum_partial_copy_nocheck); - -/* The following are special because they're not called - explicitly (the C compiler generates them). Fortunately, - their interface isn't gonna change any time soon now, so - it's OK to leave it out of version control. */ -//EXPORT_SYMBOL(__ashrdi3); -//EXPORT_SYMBOL(__lshrdi3); -EXPORT_SYMBOL(memcpy); -EXPORT_SYMBOL(memset); -EXPORT_SYMBOL(memcmp); -EXPORT_SYMBOL(memscan); -EXPORT_SYMBOL(memmove); - -/* - * libgcc functions - functions that are used internally by the - * compiler... (prototypes are not correct though, but that - * doesn't really matter since they're not versioned). - */ -extern void __gcc_bcmp(void); -extern void __ashldi3(void); -extern void __ashrdi3(void); -extern void __cmpdi2(void); -extern void __divdi3(void); -extern void __divsi3(void); -extern void __lshrdi3(void); -extern void __moddi3(void); -extern void __modsi3(void); -extern void __muldi3(void); -extern void __mulsi3(void); -extern void __negdi2(void); -extern void __ucmpdi2(void); -extern void __udivdi3(void); -extern void __udivmoddi4(void); -extern void __udivsi3(void); -extern void __umoddi3(void); -extern void __umodsi3(void); - - /* gcc lib functions */ -EXPORT_SYMBOL(__gcc_bcmp); -EXPORT_SYMBOL(__ashldi3); -EXPORT_SYMBOL(__ashrdi3); -EXPORT_SYMBOL(__cmpdi2); -EXPORT_SYMBOL(__divdi3); -EXPORT_SYMBOL(__divsi3); -EXPORT_SYMBOL(__lshrdi3); -EXPORT_SYMBOL(__moddi3); -EXPORT_SYMBOL(__modsi3); -EXPORT_SYMBOL(__muldi3); -EXPORT_SYMBOL(__mulsi3); -EXPORT_SYMBOL(__negdi2); -EXPORT_SYMBOL(__ucmpdi2); -EXPORT_SYMBOL(__udivdi3); -EXPORT_SYMBOL(__udivmoddi4); -EXPORT_SYMBOL(__udivsi3); -EXPORT_SYMBOL(__umoddi3); -EXPORT_SYMBOL(__umodsi3); - -EXPORT_SYMBOL(h8300_reserved_gpio); -EXPORT_SYMBOL(h8300_free_gpio); -EXPORT_SYMBOL(h8300_set_gpio_dir); diff --git a/arch/h8300/kernel/init_task.c b/arch/h8300/kernel/init_task.c deleted file mode 100644 index 93a4899e46c..00000000000 --- a/arch/h8300/kernel/init_task.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * linux/arch/h8300/kernel/init_task.c - */ -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/init.h> -#include <linux/init_task.h> -#include <linux/fs.h> -#include <linux/mqueue.h> - -#include <asm/uaccess.h> -#include <asm/pgtable.h> - -static struct fs_struct init_fs = INIT_FS; -static struct signal_struct init_signals = INIT_SIGNALS(init_signals); -static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); -struct mm_struct init_mm = INIT_MM(init_mm); - -EXPORT_SYMBOL(init_mm); - -/* - * Initial task structure. - * - * All other task structs will be allocated on slabs in fork.c - */ -__asm__(".align 4"); -struct task_struct init_task = INIT_TASK(init_task); - -EXPORT_SYMBOL(init_task); - -/* - * Initial thread structure. - * - * We need to make sure that this is 8192-byte aligned due to the - * way process stacks are handled. This is done by having a special - * "init_task" linker map entry.. - */ -union thread_union init_thread_union - __attribute__((__section__(".data.init_task"))) = - { INIT_THREAD_INFO(init_task) }; - diff --git a/arch/h8300/kernel/irq.c b/arch/h8300/kernel/irq.c deleted file mode 100644 index ef4f0047067..00000000000 --- a/arch/h8300/kernel/irq.c +++ /dev/null @@ -1,212 +0,0 @@ -/* - * linux/arch/h8300/kernel/irq.c - * - * Copyright 2007 Yoshinori Sato <ysato@users.sourceforge.jp> - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/kernel_stat.h> -#include <linux/seq_file.h> -#include <linux/init.h> -#include <linux/random.h> -#include <linux/bootmem.h> -#include <linux/irq.h> -#include <linux/interrupt.h> - -#include <asm/system.h> -#include <asm/traps.h> -#include <asm/io.h> -#include <asm/setup.h> -#include <asm/errno.h> - -/*#define DEBUG*/ - -extern unsigned long *interrupt_redirect_table; -extern const int h8300_saved_vectors[]; -extern const h8300_vector h8300_trap_table[]; -int h8300_enable_irq_pin(unsigned int irq); -void h8300_disable_irq_pin(unsigned int irq); - -#define CPU_VECTOR ((unsigned long *)0x000000) -#define ADDR_MASK (0xffffff) - -static inline int is_ext_irq(unsigned int irq) -{ - return (irq >= EXT_IRQ0 && irq <= (EXT_IRQ0 + EXT_IRQS)); -} - -static void h8300_enable_irq(unsigned int irq) -{ - if (is_ext_irq(irq)) - IER_REGS |= 1 << (irq - EXT_IRQ0); -} - -static void h8300_disable_irq(unsigned int irq) -{ - if (is_ext_irq(irq)) - IER_REGS &= ~(1 << (irq - EXT_IRQ0)); -} - -static void h8300_end_irq(unsigned int irq) -{ -} - -static unsigned int h8300_startup_irq(unsigned int irq) -{ - if (is_ext_irq(irq)) - return h8300_enable_irq_pin(irq); - else - return 0; -} - -static void h8300_shutdown_irq(unsigned int irq) -{ - if (is_ext_irq(irq)) - h8300_disable_irq_pin(irq); -} - -/* - * h8300 interrupt controller implementation - */ -struct irq_chip h8300irq_chip = { - .name = "H8300-INTC", - .startup = h8300_startup_irq, - .shutdown = h8300_shutdown_irq, - .enable = h8300_enable_irq, - .disable = h8300_disable_irq, - .ack = NULL, - .end = h8300_end_irq, -}; - -void ack_bad_irq(unsigned int irq) -{ - printk("unexpected IRQ trap at vector %02x\n", irq); -} - -#if defined(CONFIG_RAMKERNEL) -static unsigned long __init *get_vector_address(void) -{ - unsigned long *rom_vector = CPU_VECTOR; - unsigned long base,tmp; - int vec_no; - - base = rom_vector[EXT_IRQ0] & ADDR_MASK; - - /* check romvector format */ - for (vec_no = EXT_IRQ1; vec_no <= EXT_IRQ0+EXT_IRQS; vec_no++) { - if ((base+(vec_no - EXT_IRQ0)*4) != (rom_vector[vec_no] & ADDR_MASK)) - return NULL; - } - - /* ramvector base address */ - base -= EXT_IRQ0*4; - - /* writerble check */ - tmp = ~(*(volatile unsigned long *)base); - (*(volatile unsigned long *)base) = tmp; - if ((*(volatile unsigned long *)base) != tmp) - return NULL; - return (unsigned long *)base; -} - -static void __init setup_vector(void) -{ - int i; - unsigned long *ramvec,*ramvec_p; - const h8300_vector *trap_entry; - const int *saved_vector; - - ramvec = get_vector_address(); - if (ramvec == NULL) - panic("interrupt vector serup failed."); - else - printk(KERN_INFO "virtual vector at 0x%08lx\n",(unsigned long)ramvec); - - /* create redirect table */ - ramvec_p = ramvec; - trap_entry = h8300_trap_table; - saved_vector = h8300_saved_vectors; - for ( i = 0; i < NR_IRQS; i++) { - if (i == *saved_vector) { - ramvec_p++; - saved_vector++; - } else { - if ( i < NR_TRAPS ) { - if (*trap_entry) - *ramvec_p = VECTOR(*trap_entry); - ramvec_p++; - trap_entry++; - } else - *ramvec_p++ = REDIRECT(interrupt_entry); - } - } - interrupt_redirect_table = ramvec; -#ifdef DEBUG - ramvec_p = ramvec; - for (i = 0; i < NR_IRQS; i++) { - if ((i % 8) == 0) - printk(KERN_DEBUG "\n%p: ",ramvec_p); - printk(KERN_DEBUG "%p ",*ramvec_p); - ramvec_p++; - } - printk(KERN_DEBUG "\n"); -#endif -} -#else -#define setup_vector() do { } while(0) -#endif - -void __init init_IRQ(void) -{ - int c; - - setup_vector(); - - for (c = 0; c < NR_IRQS; c++) { - irq_desc[c].status = IRQ_DISABLED; - irq_desc[c].action = NULL; - irq_desc[c].depth = 1; - irq_desc[c].chip = &h8300irq_chip; - } -} - -asmlinkage void do_IRQ(int irq) -{ - irq_enter(); - __do_IRQ(irq); - irq_exit(); -} - -#if defined(CONFIG_PROC_FS) -int show_interrupts(struct seq_file *p, void *v) -{ - int i = *(loff_t *) v, j; - struct irqaction * action; - unsigned long flags; - - if (i == 0) - seq_puts(p, " CPU0"); - - if (i < NR_IRQS) { - spin_lock_irqsave(&irq_desc[i].lock, flags); - action = irq_desc[i].action; - if (!action) - goto unlock; - seq_printf(p, "%3d: ",i); - seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); - seq_printf(p, " %14s", irq_desc[i].chip->name); - seq_printf(p, "-%-8s", irq_desc[i].name); - seq_printf(p, " %s", action->name); - - for (action=action->next; action; action = action->next) - seq_printf(p, ", %s", action->name); - seq_putc(p, '\n'); -unlock: - spin_unlock_irqrestore(&irq_desc[i].lock, flags); - } - return 0; -} -#endif diff --git a/arch/h8300/kernel/module.c b/arch/h8300/kernel/module.c deleted file mode 100644 index 4fd7138a6e0..00000000000 --- a/arch/h8300/kernel/module.c +++ /dev/null @@ -1,122 +0,0 @@ -#include <linux/moduleloader.h> -#include <linux/elf.h> -#include <linux/vmalloc.h> -#include <linux/fs.h> -#include <linux/string.h> -#include <linux/kernel.h> - -#if 0 -#define DEBUGP printk -#else -#define DEBUGP(fmt...) -#endif - -void *module_alloc(unsigned long size) -{ - if (size == 0) - return NULL; - return vmalloc(size); -} - - -/* Free memory returned from module_alloc */ -void module_free(struct module *mod, void *module_region) -{ - vfree(module_region); - /* FIXME: If module_region == mod->init_region, trim exception - table entries. */ -} - -/* We don't need anything special. */ -int module_frob_arch_sections(Elf_Ehdr *hdr, - Elf_Shdr *sechdrs, - char *secstrings, - struct module *mod) -{ - return 0; -} - -int apply_relocate(Elf32_Shdr *sechdrs, - const char *strtab, - unsigned int symindex, - unsigned int relsec, - struct module *me) -{ - printk(KERN_ERR "module %s: RELOCATION unsupported\n", - me->name); - return -ENOEXEC; -} - -int apply_relocate_add(Elf32_Shdr *sechdrs, - const char *strtab, - unsigned int symindex, - unsigned int relsec, - struct module *me) -{ - unsigned int i; - Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr; - - DEBUGP("Applying relocate section %u to %u\n", relsec, - sechdrs[relsec].sh_info); - for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) { - /* This is where to make the change */ - uint32_t *loc = (uint32_t *)(sechdrs[sechdrs[relsec].sh_info].sh_addr - + rela[i].r_offset); - /* This is the symbol it is referring to. Note that all - undefined symbols have been resolved. */ - Elf32_Sym *sym = (Elf32_Sym *)sechdrs[symindex].sh_addr - + ELF32_R_SYM(rela[i].r_info); - uint32_t v = sym->st_value + rela[i].r_addend; - - switch (ELF32_R_TYPE(rela[i].r_info)) { - case R_H8_DIR24R8: - loc = (uint32_t *)((uint32_t)loc - 1); - *loc = (*loc & 0xff000000) | ((*loc & 0xffffff) + v); - break; - case R_H8_DIR24A8: - if (ELF32_R_SYM(rela[i].r_info)) - *loc += v; - break; - case R_H8_DIR32: - case R_H8_DIR32A16: - *loc += v; - break; - case R_H8_PCREL16: - v -= (unsigned long)loc + 2; - if ((Elf32_Sword)v > 0x7fff || - (Elf32_Sword)v < -(Elf32_Sword)0x8000) - goto overflow; - else - *(unsigned short *)loc = v; - break; - case R_H8_PCREL8: - v -= (unsigned long)loc + 1; - if ((Elf32_Sword)v > 0x7f || - (Elf32_Sword)v < -(Elf32_Sword)0x80) - goto overflow; - else - *(unsigned char *)loc = v; - break; - default: - printk(KERN_ERR "module %s: Unknown relocation: %u\n", - me->name, ELF32_R_TYPE(rela[i].r_info)); - return -ENOEXEC; - } - } - return 0; - overflow: - printk(KERN_ERR "module %s: relocation offset overflow: %08x\n", - me->name, rela[i].r_offset); - return -ENOEXEC; -} - -int module_finalize(const Elf_Ehdr *hdr, - const Elf_Shdr *sechdrs, - struct module *me) -{ - return 0; -} - -void module_arch_cleanup(struct module *mod) -{ -} diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c deleted file mode 100644 index dfbe7ab9ffe..00000000000 --- a/arch/h8300/kernel/process.c +++ /dev/null @@ -1,259 +0,0 @@ -/* - * linux/arch/h8300/kernel/process.c - * - * Yoshinori Sato <ysato@users.sourceforge.jp> - * - * Based on: - * - * linux/arch/m68knommu/kernel/process.c - * - * Copyright (C) 1998 D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>, - * Kenneth Albanowski <kjahds@kjahds.com>, - * The Silver Hammer Group, Ltd. - * - * linux/arch/m68k/kernel/process.c - * - * Copyright (C) 1995 Hamish Macdonald - * - * 68060 fixes by Jesper Skov - */ - -/* - * This file handles the architecture-dependent parts of process handling.. - */ - -#include <linux/errno.h> -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/smp.h> -#include <linux/smp_lock.h> -#include <linux/stddef.h> -#include <linux/unistd.h> -#include <linux/ptrace.h> -#include <linux/slab.h> -#include <linux/user.h> -#include <linux/a.out.h> -#include <linux/interrupt.h> -#include <linux/reboot.h> -#include <linux/fs.h> - -#include <asm/uaccess.h> -#include <asm/system.h> -#include <asm/traps.h> -#include <asm/setup.h> -#include <asm/pgtable.h> - -void (*pm_power_off)(void) = NULL; -EXPORT_SYMBOL(pm_power_off); - -asmlinkage void ret_from_fork(void); - -/* - * The idle loop on an H8/300.. - */ -#if !defined(CONFIG_H8300H_SIM) && !defined(CONFIG_H8S_SIM) -static void default_idle(void) -{ - local_irq_disable(); - if (!need_resched()) { - local_irq_enable(); - /* XXX: race here! What if need_resched() gets set now? */ - __asm__("sleep"); - } else - local_irq_enable(); -} -#else -static void default_idle(void) -{ - cpu_relax(); -} -#endif -void (*idle)(void) = default_idle; - -/* - * The idle thread. There's no useful work to be - * done, so just try to conserve power and have a - * low exit latency (ie sit in a loop waiting for - * somebody to say that they'd like to reschedule) - */ -void cpu_idle(void) -{ - while (1) { - while (!need_resched()) - idle(); - preempt_enable_no_resched(); - schedule(); - preempt_disable(); - } -} - -void machine_restart(char * __unused) -{ - local_irq_disable(); - __asm__("jmp @@0"); -} - -void machine_halt(void) -{ - local_irq_disable(); - __asm__("sleep"); - for (;;); -} - -void machine_power_off(void) -{ - local_irq_disable(); - __asm__("sleep"); - for (;;); -} - -void show_regs(struct pt_regs * regs) -{ - printk("\nPC: %08lx Status: %02x", - regs->pc, regs->ccr); - printk("\nORIG_ER0: %08lx ER0: %08lx ER1: %08lx", - regs->orig_er0, regs->er0, regs->er1); - printk("\nER2: %08lx ER3: %08lx ER4: %08lx ER5: %08lx", - regs->er2, regs->er3, regs->er4, regs->er5); - printk("\nER6' %08lx ",regs->er6); - if (user_mode(regs)) - printk("USP: %08lx\n", rdusp()); - else - printk("\n"); -} - -/* - * Create a kernel thread - */ -int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) -{ - long retval; - long clone_arg; - mm_segment_t fs; - - fs = get_fs(); - set_fs (KERNEL_DS); - clone_arg = flags | CLONE_VM; - __asm__("mov.l sp,er3\n\t" - "sub.l er2,er2\n\t" - "mov.l %2,er1\n\t" - "mov.l %1,er0\n\t" - "trapa #0\n\t" - "cmp.l sp,er3\n\t" - "beq 1f\n\t" - "mov.l %4,er0\n\t" - "mov.l %3,er1\n\t" - "jsr @er1\n\t" - "mov.l %5,er0\n\t" - "trapa #0\n" - "1:\n\t" - "mov.l er0,%0" - :"=r"(retval) - :"i"(__NR_clone),"g"(clone_arg),"g"(fn),"g"(arg),"i"(__NR_exit) - :"er0","er1","er2","er3"); - set_fs (fs); - return retval; -} - -void flush_thread(void) -{ -} - -/* - * "h8300_fork()".. By the time we get here, the - * non-volatile registers have also been saved on the - * stack. We do some ugly pointer stuff here.. (see - * also copy_thread) - */ - -asmlinkage int h8300_fork(struct pt_regs *regs) -{ - return -EINVAL; -} - -asmlinkage int h8300_vfork(struct pt_regs *regs) -{ - return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, rdusp(), regs, 0, NULL, NULL); -} - -asmlinkage int h8300_clone(struct pt_regs *regs) -{ - unsigned long clone_flags; - unsigned long newsp; - - /* syscall2 puts clone_flags in er1 and usp in er2 */ - clone_flags = regs->er1; - newsp = regs->er2; - if (!newsp) - newsp = rdusp(); - return do_fork(clone_flags, newsp, regs, 0, NULL, NULL); - -} - -int copy_thread(int nr, unsigned long clone_flags, - unsigned long usp, unsigned long topstk, - struct task_struct * p, struct pt_regs * regs) -{ - struct pt_regs * childregs; - - childregs = (struct pt_regs *) (THREAD_SIZE + task_stack_page(p)) - 1; - - *childregs = *regs; - childregs->retpc = (unsigned long) ret_from_fork; - childregs->er0 = 0; - - p->thread.usp = usp; - p->thread.ksp = (unsigned long)childregs; - - return 0; -} - -/* - * sys_execve() executes a new program. - */ -asmlinkage int sys_execve(char *name, char **argv, char **envp,int dummy,...) -{ - int error; - char * filename; - struct pt_regs *regs = (struct pt_regs *) ((unsigned char *)&dummy-4); - - lock_kernel(); - filename = getname(name); - error = PTR_ERR(filename); - if (IS_ERR(filename)) - goto out; - error = do_execve(filename, argv, envp, regs); - putname(filename); -out: - unlock_kernel(); - return error; -} - -unsigned long thread_saved_pc(struct task_struct *tsk) -{ - return ((struct pt_regs *)tsk->thread.esp0)->pc; -} - -unsigned long get_wchan(struct task_struct *p) -{ - unsigned long fp, pc; - unsigned long stack_page; - int count = 0; - if (!p || p == current || p->state == TASK_RUNNING) - return 0; - - stack_page = (unsigned long)p; - fp = ((struct pt_regs *)p->thread.ksp)->er6; - do { - if (fp < stack_page+sizeof(struct thread_info) || - fp >= 8184+stack_page) - return 0; - pc = ((unsigned long *)fp)[1]; - if (!in_sched_functions(pc)) - return pc; - fp = *(unsigned long *) fp; - } while (count++ < 16); - return 0; -} diff --git a/arch/h8300/kernel/ptrace.c b/arch/h8300/kernel/ptrace.c deleted file mode 100644 index d32bbf02fc4..00000000000 --- a/arch/h8300/kernel/ptrace.c +++ /dev/null @@ -1,236 +0,0 @@ -/* - * linux/arch/h8300/kernel/ptrace.c - * - * Yoshinori Sato <ysato@users.sourceforge.jp> - * - * Based on: - * linux/arch/m68k/kernel/ptrace.c - * - * Copyright (C) 1994 by Hamish Macdonald - * Taken from linux/kernel/ptrace.c and modified for M680x0. - * linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of - * this archive for more details. - */ - -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/mm.h> -#include <linux/smp.h> -#include <linux/errno.h> -#include <linux/ptrace.h> -#include <linux/user.h> -#include <linux/signal.h> - -#include <asm/uaccess.h> -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/system.h> -#include <asm/processor.h> -#include <asm/signal.h> - -/* cpu depend functions */ -extern long h8300_get_reg(struct task_struct *task, int regno); -extern int h8300_put_reg(struct task_struct *task, int regno, unsigned long data); -extern void h8300_disable_trace(struct task_struct *child); -extern void h8300_enable_trace(struct task_struct *child); - -/* - * does not yet catch signals sent when the child dies. - * in exit.c or in signal.c. - */ - -inline -static int read_long(struct task_struct * tsk, unsigned long addr, - unsigned long * result) -{ - *result = *(unsigned long *)addr; - return 0; -} - -void ptrace_disable(struct task_struct *child) -{ - h8300_disable_trace(child); -} - -long arch_ptrace(struct task_struct *child, long request, long addr, long data) -{ - int ret; - - switch (request) { - case PTRACE_PEEKTEXT: /* read word at location addr. */ - case PTRACE_PEEKDATA: { - unsigned long tmp; - - ret = read_long(child, addr, &tmp); - if (ret < 0) - break ; - ret = put_user(tmp, (unsigned long *) data); - break ; - } - - /* read the word at location addr in the USER area. */ - case PTRACE_PEEKUSR: { - unsigned long tmp = 0; - - if ((addr & 3) || addr < 0 || addr >= sizeof(struct user)) { - ret = -EIO; - break ; - } - - ret = 0; /* Default return condition */ - addr = addr >> 2; /* temporary hack. */ - - if (addr < H8300_REGS_NO) - tmp = h8300_get_reg(child, addr); - else { - switch(addr) { - case 49: - tmp = child->mm->start_code; - break ; - case 50: - tmp = child->mm->start_data; - break ; - case 51: - tmp = child->mm->end_code; - break ; - case 52: - tmp = child->mm->end_data; - break ; - default: - ret = -EIO; - } - } - if (!ret) - ret = put_user(tmp,(unsigned long *) data); - break ; - } - - /* when I and D space are separate, this will have to be fixed. */ - case PTRACE_POKETEXT: /* write the word at location addr. */ - case PTRACE_POKEDATA: - ret = generic_ptrace_pokedata(child, addr, data); - break; - - case PTRACE_POKEUSR: /* write the word at location addr in the USER area */ - if ((addr & 3) || addr < 0 || addr >= sizeof(struct user)) { - ret = -EIO; - break ; - } - addr = addr >> 2; /* temporary hack. */ - - if (addr == PT_ORIG_ER0) { - ret = -EIO; - break ; - } - if (addr < H8300_REGS_NO) { - ret = h8300_put_reg(child, addr, data); - break ; - } - ret = -EIO; - break ; - case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */ - case PTRACE_CONT: { /* restart after signal. */ - ret = -EIO; - if (!valid_signal(data)) - break ; - if (request == PTRACE_SYSCALL) - set_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - else - clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - child->exit_code = data; - wake_up_process(child); - /* make sure the single step bit is not set. */ - h8300_disable_trace(child); - ret = 0; - } - -/* - * make the child exit. Best I can do is send it a sigkill. - * perhaps it should be put in the status that it wants to - * exit. - */ - case PTRACE_KILL: { - - ret = 0; - if (child->exit_state == EXIT_ZOMBIE) /* already dead */ - break; - child->exit_code = SIGKILL; - h8300_disable_trace(child); - wake_up_process(child); - break; - } - - case PTRACE_SINGLESTEP: { /* set the trap flag. */ - ret = -EIO; - if (!valid_signal(data)) - break; - clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - child->exit_code = data; - h8300_enable_trace(child); - wake_up_process(child); - ret = 0; - break; - } - - case PTRACE_DETACH: /* detach a process that was attached. */ - ret = ptrace_detach(child, data); - break; - - case PTRACE_GETREGS: { /* Get all gp regs from the child. */ - int i; - unsigned long tmp; - for (i = 0; i < H8300_REGS_NO; i++) { - tmp = h8300_get_reg(child, i); - if (put_user(tmp, (unsigned long *) data)) { - ret = -EFAULT; - break; - } - data += sizeof(long); - } - ret = 0; - break; - } - - case PTRACE_SETREGS: { /* Set all gp regs in the child. */ - int i; - unsigned long tmp; - for (i = 0; i < H8300_REGS_NO; i++) { - if (get_user(tmp, (unsigned long *) data)) { - ret = -EFAULT; - break; - } - h8300_put_reg(child, i, tmp); - data += sizeof(long); - } - ret = 0; - break; - } - - default: - ret = -EIO; - break; - } - return ret; -} - -asmlinkage void do_syscall_trace(void) -{ - if (!test_thread_flag(TIF_SYSCALL_TRACE)) - return; - if (!(current->ptrace & PT_PTRACED)) - return; - ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) - ? 0x80 : 0)); - /* - * this isn't the same as continuing with a signal, but it will do - * for normal use. strace only continues with a signal if the - * stopping signal is not SIGTRAP. -brl - */ - if (current->exit_code) { - send_sig(current->exit_code, current, 1); - current->exit_code = 0; - } -} diff --git a/arch/h8300/kernel/setup.c b/arch/h8300/kernel/setup.c deleted file mode 100644 index 7fda657110e..00000000000 --- a/arch/h8300/kernel/setup.c +++ /dev/null @@ -1,245 +0,0 @@ -/* - * linux/arch/h8300/kernel/setup.c - * - * Copyleft ()) 2000 James D. Schettine {james@telos-systems.com} - * Copyright (C) 1999,2000 Greg Ungerer (gerg@snapgear.com) - * Copyright (C) 1998,1999 D. Jeff Dionne <jeff@lineo.ca> - * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com> - * Copyright (C) 1995 Hamish Macdonald - * Copyright (C) 2000 Lineo Inc. (www.lineo.com) - * Copyright (C) 2001 Lineo, Inc. <www.lineo.com> - * - * H8/300 porting Yoshinori Sato <ysato@users.sourceforge.jp> - */ - -/* - * This file handles the architecture-dependent parts of system setup - */ - -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/mm.h> -#include <linux/fs.h> -#include <linux/fb.h> -#include <linux/console.h> -#include <linux/genhd.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/major.h> -#include <linux/bootmem.h> -#include <linux/seq_file.h> -#include <linux/init.h> - -#include <asm/setup.h> -#include <asm/irq.h> -#include <asm/pgtable.h> - -#if defined(__H8300H__) -#define CPU "H8/300H" -#include <asm/regs306x.h> -#endif - -#if defined(__H8300S__) -#define CPU "H8S" -#include <asm/regs267x.h> -#endif - -#define STUBSIZE 0xc000; - -unsigned long rom_length; -unsigned long memory_start; -unsigned long memory_end; - -char __initdata command_line[COMMAND_LINE_SIZE]; - -extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end; -extern int _ramstart, _ramend; -extern char _target_name[]; -extern void h8300_gpio_init(void); - -#if (defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)) \ - && defined(CONFIG_GDB_MAGICPRINT) -/* printk with gdb service */ -static void gdb_console_output(struct console *c, const char *msg, unsigned len) -{ - for (; len > 0; len--) { - asm("mov.w %0,r2\n\t" - "jsr @0xc4"::"r"(*msg++):"er2"); - } -} - -/* - * Setup initial baud/bits/parity. We do two things here: - * - construct a cflag setting for the first rs_open() - * - initialize the serial port - * Return non-zero if we didn't find a serial port. - */ -static int __init gdb_console_setup(struct console *co, char *options) -{ - return 0; -} - -static const struct console gdb_console = { - .name = "gdb_con", - .write = gdb_console_output, - .device = NULL, - .setup = gdb_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, -}; -#endif - -void __init setup_arch(char **cmdline_p) -{ - int bootmap_size; - - memory_start = (unsigned long) &_ramstart; - - /* allow for ROMFS on the end of the kernel */ - if (memcmp((void *)memory_start, "-rom1fs-", 8) == 0) { -#if defined(CONFIG_BLK_DEV_INITRD) - initrd_start = memory_start; - initrd_end = memory_start += be32_to_cpu(((unsigned long *) (memory_start))[2]); -#else - memory_start += be32_to_cpu(((unsigned long *) memory_start)[2]); -#endif - } - memory_start = PAGE_ALIGN(memory_start); -#if !defined(CONFIG_BLKDEV_RESERVE) - memory_end = (unsigned long) &_ramend; /* by now the stack is part of the init task */ -#if defined(CONFIG_GDB_DEBUG) - memory_end -= STUBSIZE; -#endif -#else - if ((memory_end < CONFIG_BLKDEV_RESERVE_ADDRESS) && - (memory_end > CONFIG_BLKDEV_RESERVE_ADDRESS)) - /* overlap userarea */ - memory_end = CONFIG_BLKDEV_RESERVE_ADDRESS; -#endif - - init_mm.start_code = (unsigned long) &_stext; - init_mm.end_code = (unsigned long) &_etext; - init_mm.end_data = (unsigned long) &_edata; - init_mm.brk = (unsigned long) 0; - -#if (defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)) && defined(CONFIG_GDB_MAGICPRINT) - register_console((struct console *)&gdb_console); -#endif - - printk(KERN_INFO "\r\n\nuClinux " CPU "\n"); - printk(KERN_INFO "Target Hardware: %s\n",_target_name); - printk(KERN_INFO "Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne\n"); - printk(KERN_INFO "H8/300 series support by Yoshinori Sato <ysato@users.sourceforge.jp>\n"); - -#ifdef DEBUG - printk(KERN_DEBUG "KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x " - "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext, - (int) &_sdata, (int) &_edata, - (int) &_sbss, (int) &_ebss); - printk(KERN_DEBUG "KERNEL -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x " - "STACK=0x%06x-0x%06x\n", - (int) &_ebss, (int) memory_start, - (int) memory_start, (int) memory_end, - (int) memory_end, (int) &_ramend); -#endif - -#ifdef CONFIG_DEFAULT_CMDLINE - /* set from default command line */ - if (*command_line == '\0') - strcpy(command_line,CONFIG_KERNEL_COMMAND); -#endif - /* Keep a copy of command line */ - *cmdline_p = &command_line[0]; - memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); - boot_command_line[COMMAND_LINE_SIZE-1] = 0; - -#ifdef DEBUG - if (strlen(*cmdline_p)) - printk(KERN_DEBUG "Command line: '%s'\n", *cmdline_p); -#endif - - /* - * give all the memory to the bootmap allocator, tell it to put the - * boot mem_map at the start of memory - */ - bootmap_size = init_bootmem_node( - NODE_DATA(0), - memory_start >> PAGE_SHIFT, /* map goes here */ - PAGE_OFFSET >> PAGE_SHIFT, /* 0 on coldfire */ - memory_end >> PAGE_SHIFT); - /* - * free the usable memory, we have to make sure we do not free - * the bootmem bitmap so we then reserve it after freeing it :-) - */ - free_bootmem(memory_start, memory_end - memory_start); - reserve_bootmem(memory_start, bootmap_size, BOOTMEM_DEFAULT); - /* - * get kmalloc into gear - */ - paging_init(); - h8300_gpio_init(); -#if defined(CONFIG_H8300_AKI3068NET) && defined(CONFIG_IDE) - { -#define AREABIT(addr) (1 << (((addr) >> 21) & 7)) - /* setup BSC */ - volatile unsigned char *abwcr = (volatile unsigned char *)ABWCR; - volatile unsigned char *cscr = (volatile unsigned char *)CSCR; - *abwcr &= ~(AREABIT(CONFIG_H8300_IDE_BASE) | AREABIT(CONFIG_H8300_IDE_ALT)); - *cscr |= (AREABIT(CONFIG_H8300_IDE_BASE) | AREABIT(CONFIG_H8300_IDE_ALT)) | 0x0f; - } -#endif -#ifdef DEBUG - printk(KERN_DEBUG "Done setup_arch\n"); -#endif -} - -/* - * Get CPU information for use by the procfs. - */ - -static int show_cpuinfo(struct seq_file *m, void *v) -{ - char *cpu; - int mode; - u_long clockfreq; - - cpu = CPU; - mode = *(volatile unsigned char *)MDCR & 0x07; - - clockfreq = CONFIG_CPU_CLOCK; - - seq_printf(m, "CPU:\t\t%s (mode:%d)\n" - "Clock:\t\t%lu.%1luMHz\n" - "BogoMips:\t%lu.%02lu\n" - "Calibration:\t%lu loops\n", - cpu,mode, - clockfreq/1000,clockfreq%1000, - (loops_per_jiffy*HZ)/500000,((loops_per_jiffy*HZ)/5000)%100, - (loops_per_jiffy*HZ)); - - return 0; -} - -static void *c_start(struct seq_file *m, loff_t *pos) -{ - return *pos < NR_CPUS ? ((void *) 0x12345678) : NULL; -} - -static void *c_next(struct seq_file *m, void *v, loff_t *pos) -{ - ++*pos; - return c_start(m, pos); -} - -static void c_stop(struct seq_file *m, void *v) -{ -} - -const struct seq_operations cpuinfo_op = { - .start = c_start, - .next = c_next, - .stop = c_stop, - .show = show_cpuinfo, -}; diff --git a/arch/h8300/kernel/signal.c b/arch/h8300/kernel/signal.c deleted file mode 100644 index cf3472f7389..00000000000 --- a/arch/h8300/kernel/signal.c +++ /dev/null @@ -1,555 +0,0 @@ -/* - * linux/arch/h8300/kernel/signal.c - * - * Copyright (C) 1991, 1992 Linus Torvalds - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - -/* - * uClinux H8/300 support by Yoshinori Sato <ysato@users.sourceforge.jp> - * and David McCullough <davidm@snapgear.com> - * - * Based on - * Linux/m68k by Hamish Macdonald - */ - -/* - * ++roman (07/09/96): implemented signal stacks (specially for tosemu on - * Atari :-) Current limitation: Only one sigstack can be active at one time. - * If a second signal with SA_ONSTACK set arrives while working on a sigstack, - * SA_ONSTACK is ignored. This behaviour avoids lots of trouble with nested - * signal handlers! - */ - -#include <linux/sched.h> -#include <linux/mm.h> -#include <linux/kernel.h> -#include <linux/signal.h> -#include <linux/syscalls.h> -#include <linux/errno.h> -#include <linux/wait.h> -#include <linux/ptrace.h> -#include <linux/unistd.h> -#include <linux/stddef.h> -#include <linux/highuid.h> -#include <linux/personality.h> -#include <linux/tty.h> -#include <linux/binfmts.h> -#include <linux/freezer.h> - -#include <asm/setup.h> -#include <asm/uaccess.h> -#include <asm/pgtable.h> -#include <asm/traps.h> -#include <asm/ucontext.h> - -#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) - -asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset); - -/* - * Atomically swap in the new signal mask, and wait for a signal. - */ -asmlinkage int do_sigsuspend(struct pt_regs *regs) -{ - old_sigset_t mask = regs->er3; - sigset_t saveset; - - mask &= _BLOCKABLE; - spin_lock_irq(¤t->sighand->siglock); - saveset = current->blocked; - siginitset(¤t->blocked, mask); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - - regs->er0 = -EINTR; - while (1) { - current->state = TASK_INTERRUPTIBLE; - schedule(); - if (do_signal(regs, &saveset)) - return -EINTR; - } -} - -asmlinkage int -do_rt_sigsuspend(struct pt_regs *regs) -{ - sigset_t *unewset = (sigset_t *)regs->er1; - size_t sigsetsize = (size_t)regs->er2; - sigset_t saveset, newset; - - /* XXX: Don't preclude handling different sized sigset_t's. */ - if (sigsetsize != sizeof(sigset_t)) - return -EINVAL; - - if (copy_from_user(&newset, unewset, sizeof(newset))) - return -EFAULT; - sigdelsetmask(&newset, ~_BLOCKABLE); - - spin_lock_irq(¤t->sighand->siglock); - saveset = current->blocked; - current->blocked = newset; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - - regs->er0 = -EINTR; - while (1) { - current->state = TASK_INTERRUPTIBLE; - schedule(); - if (do_signal(regs, &saveset)) - return -EINTR; - } -} - -asmlinkage int -sys_sigaction(int sig, const struct old_sigaction *act, - struct old_sigaction *oact) -{ - struct k_sigaction new_ka, old_ka; - int ret; - - if (act) { - old_sigset_t mask; - if (!access_ok(VERIFY_READ, act, sizeof(*act)) || - __get_user(new_ka.sa.sa_handler, &act->sa_handler) || - __get_user(new_ka.sa.sa_restorer, &act->sa_restorer)) - return -EFAULT; - __get_user(new_ka.sa.sa_flags, &act->sa_flags); - __get_user(mask, &act->sa_mask); - siginitset(&new_ka.sa.sa_mask, mask); - } - - ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); - - if (!ret && oact) { - if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) || - __put_user(old_ka.sa.sa_handler, &oact->sa_handler) || - __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer)) - return -EFAULT; - __put_user(old_ka.sa.sa_flags, &oact->sa_flags); - __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask); - } - - return ret; -} - -asmlinkage int -sys_sigaltstack(const stack_t *uss, stack_t *uoss) -{ - return do_sigaltstack(uss, uoss, rdusp()); -} - - -/* - * Do a signal return; undo the signal stack. - * - * Keep the return code on the stack quadword aligned! - * That makes the cache flush below easier. - */ - -struct sigframe -{ - long dummy_er0; - long dummy_vector; -#if defined(CONFIG_CPU_H8S) - short dummy_exr; -#endif - long dummy_pc; - char *pretcode; - unsigned char retcode[8]; - unsigned long extramask[_NSIG_WORDS-1]; - struct sigcontext sc; - int sig; -} __attribute__((aligned(2),packed)); - -struct rt_sigframe -{ - long dummy_er0; - long dummy_vector; -#if defined(CONFIG_CPU_H8S) - short dummy_exr; -#endif - long dummy_pc; - char *pretcode; - struct siginfo *pinfo; - void *puc; - unsigned char retcode[8]; - struct siginfo info; - struct ucontext uc; - int sig; -} __attribute__((aligned(2),packed)); - -static inline int -restore_sigcontext(struct pt_regs *regs, struct sigcontext *usc, - int *pd0) -{ - int err = 0; - unsigned int ccr; - unsigned int usp; - unsigned int er0; - - /* Always make any pending restarted system calls return -EINTR */ - current_thread_info()->restart_block.fn = do_no_restart_syscall; - -#define COPY(r) err |= __get_user(regs->r, &usc->sc_##r) /* restore passed registers */ - COPY(er1); - COPY(er2); - COPY(er3); - COPY(er5); - COPY(pc); - ccr = regs->ccr & 0x10; - COPY(ccr); -#undef COPY - regs->ccr &= 0xef; - regs->ccr |= ccr; - regs->orig_er0 = -1; /* disable syscall checks */ - err |= __get_user(usp, &usc->sc_usp); - wrusp(usp); - - err |= __get_user(er0, &usc->sc_er0); - *pd0 = er0; - return err; -} - -asmlinkage int do_sigreturn(unsigned long __unused,...) -{ - struct pt_regs *regs = (struct pt_regs *) (&__unused - 1); - unsigned long usp = rdusp(); - struct sigframe *frame = (struct sigframe *)(usp - 4); - sigset_t set; - int er0; - - if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) - goto badframe; - if (__get_user(set.sig[0], &frame->sc.sc_mask) || - (_NSIG_WORDS > 1 && - __copy_from_user(&set.sig[1], &frame->extramask, - sizeof(frame->extramask)))) - goto badframe; - - sigdelsetmask(&set, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - current->blocked = set; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - - if (restore_sigcontext(regs, &frame->sc, &er0)) - goto badframe; - return er0; - -badframe: - force_sig(SIGSEGV, current); - return 0; -} - -asmlinkage int do_rt_sigreturn(unsigned long __unused,...) -{ - struct pt_regs *regs = (struct pt_regs *) &__unused; - unsigned long usp = rdusp(); - struct rt_sigframe *frame = (struct rt_sigframe *)(usp - 4); - sigset_t set; - int er0; - - if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) - goto badframe; - if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) - goto badframe; - - sigdelsetmask(&set, ~_BLOCKABLE); - spin_unlock_irq(¤t->sighand->siglock); - current->blocked = set; - recalc_sigpending(); - spin_lock_irq(¤t->sighand->siglock); - - if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &er0)) - goto badframe; - - if (do_sigaltstack(&frame->uc.uc_stack, NULL, usp) == -EFAULT) - goto badframe; - - return er0; - -badframe: - force_sig(SIGSEGV, current); - return 0; -} - -static int setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, - unsigned long mask) -{ - int err = 0; - - err |= __put_user(regs->er0, &sc->sc_er0); - err |= __put_user(regs->er1, &sc->sc_er1); - err |= __put_user(regs->er2, &sc->sc_er2); - err |= __put_user(regs->er3, &sc->sc_er3); - err |= __put_user(regs->er4, &sc->sc_er4); - err |= __put_user(regs->er5, &sc->sc_er5); - err |= __put_user(regs->er6, &sc->sc_er6); - err |= __put_user(rdusp(), &sc->sc_usp); - err |= __put_user(regs->pc, &sc->sc_pc); - err |= __put_user(regs->ccr, &sc->sc_ccr); - err |= __put_user(mask, &sc->sc_mask); - - return err; -} - -static inline void * -get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size) -{ - unsigned long usp; - - /* Default to using normal stack. */ - usp = rdusp(); - - /* This is the X/Open sanctioned signal stack switching. */ - if (ka->sa.sa_flags & SA_ONSTACK) { - if (!sas_ss_flags(usp)) - usp = current->sas_ss_sp + current->sas_ss_size; - } - return (void *)((usp - frame_size) & -8UL); -} - -static void setup_frame (int sig, struct k_sigaction *ka, - sigset_t *set, struct pt_regs *regs) -{ - struct sigframe *frame; - int err = 0; - int usig; - unsigned char *ret; - - frame = get_sigframe(ka, regs, sizeof(*frame)); - - if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) - goto give_sigsegv; - - usig = current_thread_info()->exec_domain - && current_thread_info()->exec_domain->signal_invmap - && sig < 32 - ? current_thread_info()->exec_domain->signal_invmap[sig] - : sig; - - err |= __put_user(usig, &frame->sig); - if (err) - goto give_sigsegv; - - err |= setup_sigcontext(&frame->sc, regs, set->sig[0]); - if (err) - goto give_sigsegv; - - if (_NSIG_WORDS > 1) { - err |= copy_to_user(frame->extramask, &set->sig[1], - sizeof(frame->extramask)); - if (err) - goto give_sigsegv; - } - - ret = frame->retcode; - if (ka->sa.sa_flags & SA_RESTORER) - ret = (unsigned char *)(ka->sa.sa_restorer); - else { - /* sub.l er0,er0; mov.b #__NR_sigreturn,r0l; trapa #0 */ - err |= __put_user(0x1a80f800 + (__NR_sigreturn & 0xff), - (unsigned long *)(frame->retcode + 0)); - err |= __put_user(0x5700, (unsigned short *)(frame->retcode + 4)); - } - - /* Set up to return from userspace. */ - err |= __put_user(ret, &frame->pretcode); - - if (err) - goto give_sigsegv; - - /* Set up registers for signal handler */ - wrusp ((unsigned long) frame); - regs->pc = (unsigned long) ka->sa.sa_handler; - regs->er0 = (current_thread_info()->exec_domain - && current_thread_info()->exec_domain->signal_invmap - && sig < 32 - ? current_thread_info()->exec_domain->signal_invmap[sig] - : sig); - regs->er1 = (unsigned long)&(frame->sc); - regs->er5 = current->mm->start_data; /* GOT base */ - - return; - -give_sigsegv: - force_sigsegv(sig, current); -} - -static void setup_rt_frame (int sig, struct k_sigaction *ka, siginfo_t *info, - sigset_t *set, struct pt_regs *regs) -{ - struct rt_sigframe *frame; - int err = 0; - int usig; - unsigned char *ret; - - frame = get_sigframe(ka, regs, sizeof(*frame)); - - if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) - goto give_sigsegv; - - usig = current_thread_info()->exec_domain - && current_thread_info()->exec_domain->signal_invmap - && sig < 32 - ? current_thread_info()->exec_domain->signal_invmap[sig] - : sig; - - err |= __put_user(usig, &frame->sig); - if (err) - goto give_sigsegv; - - err |= __put_user(&frame->info, &frame->pinfo); - err |= __put_user(&frame->uc, &frame->puc); - err |= copy_siginfo_to_user(&frame->info, info); - if (err) - goto give_sigsegv; - - /* Create the ucontext. */ - err |= __put_user(0, &frame->uc.uc_flags); - err |= __put_user(0, &frame->uc.uc_link); - err |= __put_user((void *)current->sas_ss_sp, - &frame->uc.uc_stack.ss_sp); - err |= __put_user(sas_ss_flags(rdusp()), - &frame->uc.uc_stack.ss_flags); - err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); - err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0]); - err |= copy_to_user (&frame->uc.uc_sigmask, set, sizeof(*set)); - if (err) - goto give_sigsegv; - - /* Set up to return from userspace. */ - ret = frame->retcode; - if (ka->sa.sa_flags & SA_RESTORER) - ret = (unsigned char *)(ka->sa.sa_restorer); - else { - /* sub.l er0,er0; mov.b #__NR_sigreturn,r0l; trapa #0 */ - err |= __put_user(0x1a80f800 + (__NR_sigreturn & 0xff), - (unsigned long *)(frame->retcode + 0)); - err |= __put_user(0x5700, (unsigned short *)(frame->retcode + 4)); - } - err |= __put_user(ret, &frame->pretcode); - - if (err) - goto give_sigsegv; - - /* Set up registers for signal handler */ - wrusp ((unsigned long) frame); - regs->pc = (unsigned long) ka->sa.sa_handler; - regs->er0 = (current_thread_info()->exec_domain - && current_thread_info()->exec_domain->signal_invmap - && sig < 32 - ? current_thread_info()->exec_domain->signal_invmap[sig] - : sig); - regs->er1 = (unsigned long)&(frame->info); - regs->er2 = (unsigned long)&frame->uc; - regs->er5 = current->mm->start_data; /* GOT base */ - - return; - -give_sigsegv: - force_sigsegv(sig, current); -} - -/* - * OK, we're invoking a handler - */ -static void -handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, - sigset_t *oldset, struct pt_regs * regs) -{ - /* are we from a system call? */ - if (regs->orig_er0 >= 0) { - switch (regs->er0) { - case -ERESTART_RESTARTBLOCK: - case -ERESTARTNOHAND: - regs->er0 = -EINTR; - break; - - case -ERESTARTSYS: - if (!(ka->sa.sa_flags & SA_RESTART)) { - regs->er0 = -EINTR; - break; - } - /* fallthrough */ - case -ERESTARTNOINTR: - regs->er0 = regs->orig_er0; - regs->pc -= 2; - } - } - - /* set up the stack frame */ - if (ka->sa.sa_flags & SA_SIGINFO) - setup_rt_frame(sig, ka, info, oldset, regs); - else - setup_frame(sig, ka, oldset, regs); - - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); - if (!(ka->sa.sa_flags & SA_NODEFER)) - sigaddset(¤t->blocked,sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); -} - -/* - * Note that 'init' is a special process: it doesn't get signals it doesn't - * want to handle. Thus you cannot kill init even with a SIGKILL even by - * mistake. - */ -asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset) -{ - siginfo_t info; - int signr; - struct k_sigaction ka; - - /* - * We want the common case to go fast, which - * is why we may in certain cases get here from - * kernel mode. Just return without doing anything - * if so. - */ - if ((regs->ccr & 0x10)) - return 1; - - if (try_to_freeze()) - goto no_signal; - - current->thread.esp0 = (unsigned long) regs; - - if (!oldset) - oldset = ¤t->blocked; - - signr = get_signal_to_deliver(&info, &ka, regs, NULL); - if (signr > 0) { - /* Whee! Actually deliver the signal. */ - handle_signal(signr, &info, &ka, oldset, regs); - return 1; - } - no_signal: - /* Did we come from a system call? */ - if (regs->orig_er0 >= 0) { - /* Restart the system call - no handlers present */ - if (regs->er0 == -ERESTARTNOHAND || - regs->er0 == -ERESTARTSYS || - regs->er0 == -ERESTARTNOINTR) { - regs->er0 = regs->orig_er0; - regs->pc -= 2; - } - if (regs->er0 == -ERESTART_RESTARTBLOCK){ - regs->er0 = __NR_restart_syscall; - regs->pc -= 2; - } - } - return 0; -} - -asmlinkage void do_notify_resume(struct pt_regs *regs, u32 thread_info_flags) -{ - if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK)) - do_signal(regs, NULL); -} diff --git a/arch/h8300/kernel/sys_h8300.c b/arch/h8300/kernel/sys_h8300.c deleted file mode 100644 index 2745656dcc5..00000000000 --- a/arch/h8300/kernel/sys_h8300.c +++ /dev/null @@ -1,289 +0,0 @@ -/* - * linux/arch/h8300/kernel/sys_h8300.c - * - * This file contains various random system calls that - * have a non-standard calling sequence on the H8/300 - * platform. - */ - -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/mm.h> -#include <linux/smp.h> -#include <linux/sem.h> -#include <linux/msg.h> -#include <linux/shm.h> -#include <linux/stat.h> -#include <linux/syscalls.h> -#include <linux/mman.h> -#include <linux/file.h> -#include <linux/utsname.h> -#include <linux/fs.h> -#include <linux/ipc.h> - -#include <asm/setup.h> -#include <asm/uaccess.h> -#include <asm/cachectl.h> -#include <asm/traps.h> -#include <asm/unistd.h> - -/* common code for old and new mmaps */ -static inline long do_mmap2( - unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - int error = -EBADF; - struct file * file = NULL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return error; -} - -asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - return do_mmap2(addr, len, prot, flags, fd, pgoff); -} - -/* - * Perform the select(nd, in, out, ex, tv) and mmap() system - * calls. Linux/m68k cloned Linux/i386, which didn't use to be able to - * handle more than 4 system call parameters, so these system calls - * used a memory block for parameter passing.. - */ - -struct mmap_arg_struct { - unsigned long addr; - unsigned long len; - unsigned long prot; - unsigned long flags; - unsigned long fd; - unsigned long offset; -}; - -asmlinkage int old_mmap(struct mmap_arg_struct *arg) -{ - struct mmap_arg_struct a; - int error = -EFAULT; - - if (copy_from_user(&a, arg, sizeof(a))) - goto out; - - error = -EINVAL; - if (a.offset & ~PAGE_MASK) - goto out; - - a.flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - - error = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT); -out: - return error; -} - -#if 0 /* DAVIDM - do we want this */ -struct mmap_arg_struct64 { - __u32 addr; - __u32 len; - __u32 prot; - __u32 flags; - __u64 offset; /* 64 bits */ - __u32 fd; -}; - -asmlinkage long sys_mmap64(struct mmap_arg_struct64 *arg) -{ - int error = -EFAULT; - struct file * file = NULL; - struct mmap_arg_struct64 a; - unsigned long pgoff; - - if (copy_from_user(&a, arg, sizeof(a))) - return -EFAULT; - - if ((long)a.offset & ~PAGE_MASK) - return -EINVAL; - - pgoff = a.offset >> PAGE_SHIFT; - if ((a.offset >> PAGE_SHIFT) != pgoff) - return -EINVAL; - - if (!(a.flags & MAP_ANONYMOUS)) { - error = -EBADF; - file = fget(a.fd); - if (!file) - goto out; - } - a.flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, a.addr, a.len, a.prot, a.flags, pgoff); - up_write(¤t->mm->mmap_sem); - if (file) - fput(file); -out: - return error; -} -#endif - -struct sel_arg_struct { - unsigned long n; - fd_set *inp, *outp, *exp; - struct timeval *tvp; -}; - -asmlinkage int old_select(struct sel_arg_struct *arg) -{ - struct sel_arg_struct a; - - if (copy_from_user(&a, arg, sizeof(a))) - return -EFAULT; - /* sys_select() does the appropriate kernel locking */ - return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp); -} - -/* - * sys_ipc() is the de-multiplexer for the SysV IPC calls.. - * - * This is really horribly ugly. - */ -asmlinkage int sys_ipc (uint call, int first, int second, - int third, void *ptr, long fifth) -{ - int version, ret; - - version = call >> 16; /* hack for backward compatibility */ - call &= 0xffff; - - if (call <= SEMCTL) - switch (call) { - case SEMOP: - return sys_semop (first, (struct sembuf *)ptr, second); - case SEMGET: - return sys_semget (first, second, third); - case SEMCTL: { - union semun fourth; - if (!ptr) - return -EINVAL; - if (get_user(fourth.__pad, (void **) ptr)) - return -EFAULT; - return sys_semctl (first, second, third, fourth); - } - default: - return -EINVAL; - } - if (call <= MSGCTL) - switch (call) { - case MSGSND: - return sys_msgsnd (first, (struct msgbuf *) ptr, - second, third); - case MSGRCV: - switch (version) { - case 0: { - struct ipc_kludge tmp; - if (!ptr) - return -EINVAL; - if (copy_from_user (&tmp, - (struct ipc_kludge *)ptr, - sizeof (tmp))) - return -EFAULT; - return sys_msgrcv (first, tmp.msgp, second, - tmp.msgtyp, third); - } - default: - return sys_msgrcv (first, - (struct msgbuf *) ptr, - second, fifth, third); - } - case MSGGET: - return sys_msgget ((key_t) first, second); - case MSGCTL: - return sys_msgctl (first, second, - (struct msqid_ds *) ptr); - default: - return -EINVAL; - } - if (call <= SHMCTL) - switch (call) { - case SHMAT: - switch (version) { - default: { - ulong raddr; - ret = do_shmat (first, (char *) ptr, - second, &raddr); - if (ret) - return ret; - return put_user (raddr, (ulong *) third); - } - } - case SHMDT: - return sys_shmdt ((char *)ptr); - case SHMGET: - return sys_shmget (first, second, third); - case SHMCTL: - return sys_shmctl (first, second, - (struct shmid_ds *) ptr); - default: - return -EINVAL; - } - - return -EINVAL; -} - -/* sys_cacheflush -- no support. */ -asmlinkage int -sys_cacheflush (unsigned long addr, int scope, int cache, unsigned long len) -{ - return -EINVAL; -} - -asmlinkage int sys_getpagesize(void) -{ - return PAGE_SIZE; -} - -#if defined(CONFIG_SYSCALL_PRINT) -asmlinkage void syscall_print(void *dummy,...) -{ - struct pt_regs *regs = (struct pt_regs *) ((unsigned char *)&dummy-4); - printk("call %06lx:%ld 1:%08lx,2:%08lx,3:%08lx,ret:%08lx\n", - ((regs->pc)&0xffffff)-2,regs->orig_er0,regs->er1,regs->er2,regs->er3,regs->er0); -} -#endif - -/* - * Do a system call from kernel instead of calling sys_execve so we - * end up with proper pt_regs. - */ -int kernel_execve(const char *filename, char *const argv[], char *const envp[]) -{ - register long res __asm__("er0"); - register char *const *_c __asm__("er3") = envp; - register char *const *_b __asm__("er2") = argv; - register const char * _a __asm__("er1") = filename; - __asm__ __volatile__ ("mov.l %1,er0\n\t" - "trapa #0\n\t" - : "=r" (res) - : "g" (__NR_execve), - "g" (_a), - "g" (_b), - "g" (_c) - : "cc", "memory"); - return res; -} - - diff --git a/arch/h8300/kernel/syscalls.S b/arch/h8300/kernel/syscalls.S deleted file mode 100644 index 54e21c3f205..00000000000 --- a/arch/h8300/kernel/syscalls.S +++ /dev/null @@ -1,365 +0,0 @@ -/* Systemcall Entry Table */ -#include <linux/sys.h> -#include <asm/linkage.h> -#include <asm/unistd.h> - -.globl SYMBOL_NAME(sys_call_table) - -#if defined(CONFIG_CPU_H8300H) - .h8300h -#endif -#if defined(CONFIG_CPU_H8S) - .h8300s -#endif - .section .text - .align 2 -SYMBOL_NAME_LABEL(sys_call_table) - .long SYMBOL_NAME(sys_ni_syscall) /* 0 - old "setup()" system call*/ - .long SYMBOL_NAME(sys_exit) - .long SYMBOL_NAME(sys_fork) - .long SYMBOL_NAME(sys_read) - .long SYMBOL_NAME(sys_write) - .long SYMBOL_NAME(sys_open) /* 5 */ - .long SYMBOL_NAME(sys_close) - .long SYMBOL_NAME(sys_waitpid) - .long SYMBOL_NAME(sys_creat) - .long SYMBOL_NAME(sys_link) - .long SYMBOL_NAME(sys_unlink) /* 10 */ - .long SYMBOL_NAME(sys_execve) - .long SYMBOL_NAME(sys_chdir) - .long SYMBOL_NAME(sys_time) - .long SYMBOL_NAME(sys_mknod) - .long SYMBOL_NAME(sys_chmod) /* 15 */ - .long SYMBOL_NAME(sys_chown16) - .long SYMBOL_NAME(sys_ni_syscall) /* old break syscall holder */ - .long SYMBOL_NAME(sys_stat) - .long SYMBOL_NAME(sys_lseek) - .long SYMBOL_NAME(sys_getpid) /* 20 */ - .long SYMBOL_NAME(sys_mount) - .long SYMBOL_NAME(sys_oldumount) - .long SYMBOL_NAME(sys_setuid16) - .long SYMBOL_NAME(sys_getuid16) - .long SYMBOL_NAME(sys_stime) /* 25 */ - .long SYMBOL_NAME(sys_ptrace) - .long SYMBOL_NAME(sys_alarm) - .long SYMBOL_NAME(sys_fstat) - .long SYMBOL_NAME(sys_pause) - .long SYMBOL_NAME(sys_utime) /* 30 */ - .long SYMBOL_NAME(sys_ni_syscall) /* old stty syscall holder */ - .long SYMBOL_NAME(sys_ni_syscall) /* old gtty syscall holder */ - .long SYMBOL_NAME(sys_access) - .long SYMBOL_NAME(sys_nice) - .long SYMBOL_NAME(sys_ni_syscall) /* 35 old ftime syscall holder */ - .long SYMBOL_NAME(sys_sync) - .long SYMBOL_NAME(sys_kill) - .long SYMBOL_NAME(sys_rename) - .long SYMBOL_NAME(sys_mkdir) - .long SYMBOL_NAME(sys_rmdir) /* 40 */ - .long SYMBOL_NAME(sys_dup) - .long SYMBOL_NAME(sys_pipe) - .long SYMBOL_NAME(sys_times) - .long SYMBOL_NAME(sys_ni_syscall) /* old prof syscall holder */ - .long SYMBOL_NAME(sys_brk) /* 45 */ - .long SYMBOL_NAME(sys_setgid16) - .long SYMBOL_NAME(sys_getgid16) - .long SYMBOL_NAME(sys_signal) - .long SYMBOL_NAME(sys_geteuid16) - .long SYMBOL_NAME(sys_getegid16) /* 50 */ - .long SYMBOL_NAME(sys_acct) - .long SYMBOL_NAME(sys_umount) /* recycled never used phys() */ - .long SYMBOL_NAME(sys_ni_syscall) /* old lock syscall holder */ - .long SYMBOL_NAME(sys_ioctl) - .long SYMBOL_NAME(sys_fcntl) /* 55 */ - .long SYMBOL_NAME(sys_ni_syscall) /* old mpx syscall holder */ - .long SYMBOL_NAME(sys_setpgid) - .long SYMBOL_NAME(sys_ni_syscall) /* old ulimit syscall holder */ - .long SYMBOL_NAME(sys_ni_syscall) - .long SYMBOL_NAME(sys_umask) /* 60 */ - .long SYMBOL_NAME(sys_chroot) - .long SYMBOL_NAME(sys_ustat) - .long SYMBOL_NAME(sys_dup2) - .long SYMBOL_NAME(sys_getppid) - .long SYMBOL_NAME(sys_getpgrp) /* 65 */ - .long SYMBOL_NAME(sys_setsid) - .long SYMBOL_NAME(sys_sigaction) - .long SYMBOL_NAME(sys_sgetmask) - .long SYMBOL_NAME(sys_ssetmask) - .long SYMBOL_NAME(sys_setreuid16) /* 70 */ - .long SYMBOL_NAME(sys_setregid16) - .long SYMBOL_NAME(sys_sigsuspend) - .long SYMBOL_NAME(sys_sigpending) - .long SYMBOL_NAME(sys_sethostname) - .long SYMBOL_NAME(sys_setrlimit) /* 75 */ - .long SYMBOL_NAME(sys_old_getrlimit) - .long SYMBOL_NAME(sys_getrusage) - .long SYMBOL_NAME(sys_gettimeofday) - .long SYMBOL_NAME(sys_settimeofday) - .long SYMBOL_NAME(sys_getgroups16) /* 80 */ - .long SYMBOL_NAME(sys_setgroups16) - .long SYMBOL_NAME(old_select) - .long SYMBOL_NAME(sys_symlink) - .long SYMBOL_NAME(sys_lstat) - .long SYMBOL_NAME(sys_readlink) /* 85 */ - .long SYMBOL_NAME(sys_uselib) - .long SYMBOL_NAME(sys_swapon) - .long SYMBOL_NAME(sys_reboot) - .long SYMBOL_NAME(old_readdir) - .long SYMBOL_NAME(old_mmap) /* 90 */ - .long SYMBOL_NAME(sys_munmap) - .long SYMBOL_NAME(sys_truncate) - .long SYMBOL_NAME(sys_ftruncate) - .long SYMBOL_NAME(sys_fchmod) - .long SYMBOL_NAME(sys_fchown16) /* 95 */ - .long SYMBOL_NAME(sys_getpriority) - .long SYMBOL_NAME(sys_setpriority) - .long SYMBOL_NAME(sys_ni_syscall) /* old profil syscall holder */ - .long SYMBOL_NAME(sys_statfs) - .long SYMBOL_NAME(sys_fstatfs) /* 100 */ - .long SYMBOL_NAME(sys_ni_syscall) /* ioperm for i386 */ - .long SYMBOL_NAME(sys_socketcall) - .long SYMBOL_NAME(sys_syslog) - .long SYMBOL_NAME(sys_setitimer) - .long SYMBOL_NAME(sys_getitimer) /* 105 */ - .long SYMBOL_NAME(sys_newstat) - .long SYMBOL_NAME(sys_newlstat) - .long SYMBOL_NAME(sys_newfstat) - .long SYMBOL_NAME(sys_ni_syscall) - .long SYMBOL_NAME(sys_ni_syscall) /* iopl for i386 */ /* 110 */ - .long SYMBOL_NAME(sys_vhangup) - .long SYMBOL_NAME(sys_ni_syscall) /* obsolete idle() syscall */ - .long SYMBOL_NAME(sys_ni_syscall) /* vm86old for i386 */ - .long SYMBOL_NAME(sys_wait4) - .long SYMBOL_NAME(sys_swapoff) /* 115 */ - .long SYMBOL_NAME(sys_sysinfo) - .long SYMBOL_NAME(sys_ipc) - .long SYMBOL_NAME(sys_fsync) - .long SYMBOL_NAME(sys_sigreturn) - .long SYMBOL_NAME(sys_clone) /* 120 */ - .long SYMBOL_NAME(sys_setdomainname) - .long SYMBOL_NAME(sys_newuname) - .long SYMBOL_NAME(sys_cacheflush) /* modify_ldt for i386 */ - .long SYMBOL_NAME(sys_adjtimex) - .long SYMBOL_NAME(sys_ni_syscall) /* 125 sys_mprotect */ - .long SYMBOL_NAME(sys_sigprocmask) - .long SYMBOL_NAME(sys_ni_syscall) /* sys_create_module */ - .long SYMBOL_NAME(sys_init_module) - .long SYMBOL_NAME(sys_delete_module) - .long SYMBOL_NAME(sys_ni_syscall) /* 130 sys_get_kernel_syms */ - .long SYMBOL_NAME(sys_quotactl) - .long SYMBOL_NAME(sys_getpgid) - .long SYMBOL_NAME(sys_fchdir) - .long SYMBOL_NAME(sys_bdflush) - .long SYMBOL_NAME(sys_sysfs) /* 135 */ - .long SYMBOL_NAME(sys_personality) - .long SYMBOL_NAME(sys_ni_syscall) /* for afs_syscall */ - .long SYMBOL_NAME(sys_setfsuid16) - .long SYMBOL_NAME(sys_setfsgid16) - .long SYMBOL_NAME(sys_llseek) /* 140 */ - .long SYMBOL_NAME(sys_getdents) - .long SYMBOL_NAME(sys_select) - .long SYMBOL_NAME(sys_flock) - .long SYMBOL_NAME(sys_ni_syscall) /* sys_msync */ - .long SYMBOL_NAME(sys_readv) /* 145 */ - .long SYMBOL_NAME(sys_writev) - .long SYMBOL_NAME(sys_getsid) - .long SYMBOL_NAME(sys_fdatasync) - .long SYMBOL_NAME(sys_sysctl) - .long SYMBOL_NAME(sys_ni_syscall) /* 150 sys_mlock */ - .long SYMBOL_NAME(sys_ni_syscall) /* sys_munlock */ - .long SYMBOL_NAME(sys_ni_syscall) /* sys_mlockall */ - .long SYMBOL_NAME(sys_ni_syscall) /* sys_munlockall */ - .long SYMBOL_NAME(sys_sched_setparam) - .long SYMBOL_NAME(sys_sched_getparam) /* 155 */ - .long SYMBOL_NAME(sys_sched_setscheduler) - .long SYMBOL_NAME(sys_sched_getscheduler) - .long SYMBOL_NAME(sys_sched_yield) - .long SYMBOL_NAME(sys_sched_get_priority_max) - .long SYMBOL_NAME(sys_sched_get_priority_min) /* 160 */ - .long SYMBOL_NAME(sys_sched_rr_get_interval) - .long SYMBOL_NAME(sys_nanosleep) - .long SYMBOL_NAME(sys_ni_syscall) /* sys_mremap */ - .long SYMBOL_NAME(sys_setresuid16) - .long SYMBOL_NAME(sys_getresuid16) /* 165 */ - .long SYMBOL_NAME(sys_ni_syscall) /* for vm86 */ - .long SYMBOL_NAME(sys_ni_syscall) /* sys_query_module */ - .long SYMBOL_NAME(sys_poll) - .long SYMBOL_NAME(sys_nfsservctl) - .long SYMBOL_NAME(sys_setresgid16) /* 170 */ - .long SYMBOL_NAME(sys_getresgid16) - .long SYMBOL_NAME(sys_prctl) - .long SYMBOL_NAME(sys_rt_sigreturn) - .long SYMBOL_NAME(sys_rt_sigaction) - .long SYMBOL_NAME(sys_rt_sigprocmask) /* 175 */ - .long SYMBOL_NAME(sys_rt_sigpending) - .long SYMBOL_NAME(sys_rt_sigtimedwait) - .long SYMBOL_NAME(sys_rt_sigqueueinfo) - .long SYMBOL_NAME(sys_rt_sigsuspend) - .long SYMBOL_NAME(sys_pread64) /* 180 */ - .long SYMBOL_NAME(sys_pwrite64) - .long SYMBOL_NAME(sys_lchown16); - .long SYMBOL_NAME(sys_getcwd) - .long SYMBOL_NAME(sys_capget) - .long SYMBOL_NAME(sys_capset) /* 185 */ - .long SYMBOL_NAME(sys_sigaltstack) - .long SYMBOL_NAME(sys_sendfile) - .long SYMBOL_NAME(sys_ni_syscall) /* streams1 */ - .long SYMBOL_NAME(sys_ni_syscall) /* streams2 */ - .long SYMBOL_NAME(sys_vfork) /* 190 */ - .long SYMBOL_NAME(sys_getrlimit) - .long SYMBOL_NAME(sys_mmap2) - .long SYMBOL_NAME(sys_truncate64) - .long SYMBOL_NAME(sys_ftruncate64) - .long SYMBOL_NAME(sys_stat64) /* 195 */ - .long SYMBOL_NAME(sys_lstat64) - .long SYMBOL_NAME(sys_fstat64) - .long SYMBOL_NAME(sys_chown) - .long SYMBOL_NAME(sys_getuid) - .long SYMBOL_NAME(sys_getgid) /* 200 */ - .long SYMBOL_NAME(sys_geteuid) - .long SYMBOL_NAME(sys_getegid) - .long SYMBOL_NAME(sys_setreuid) - .long SYMBOL_NAME(sys_setregid) - .long SYMBOL_NAME(sys_getgroups) /* 205 */ - .long SYMBOL_NAME(sys_setgroups) - .long SYMBOL_NAME(sys_fchown) - .long SYMBOL_NAME(sys_setresuid) - .long SYMBOL_NAME(sys_getresuid) - .long SYMBOL_NAME(sys_setresgid) /* 210 */ - .long SYMBOL_NAME(sys_getresgid) - .long SYMBOL_NAME(sys_lchown) - .long SYMBOL_NAME(sys_setuid) - .long SYMBOL_NAME(sys_setgid) - .long SYMBOL_NAME(sys_setfsuid) /* 215 */ - .long SYMBOL_NAME(sys_setfsgid) - .long SYMBOL_NAME(sys_pivot_root) - .long SYMBOL_NAME(sys_ni_syscall) - .long SYMBOL_NAME(sys_ni_syscall) - .long SYMBOL_NAME(sys_getdents64) /* 220 */ - .long SYMBOL_NAME(sys_fcntl64) - .long SYMBOL_NAME(sys_ni_syscall) /* reserved TUX */ - .long SYMBOL_NAME(sys_ni_syscall) /* reserved Security */ - .long SYMBOL_NAME(sys_gettid) - .long SYMBOL_NAME(sys_readahead) /* 225 */ - .long SYMBOL_NAME(sys_setxattr) - .long SYMBOL_NAME(sys_lsetxattr) - .long SYMBOL_NAME(sys_fsetxattr) - .long SYMBOL_NAME(sys_getxattr) - .long SYMBOL_NAME(sys_lgetxattr) /* 230 */ - .long SYMBOL_NAME(sys_fgetxattr) - .long SYMBOL_NAME(sys_listxattr) - .long SYMBOL_NAME(sys_llistxattr) - .long SYMBOL_NAME(sys_flistxattr) - .long SYMBOL_NAME(sys_removexattr) /* 235 */ - .long SYMBOL_NAME(sys_lremovexattr) - .long SYMBOL_NAME(sys_fremovexattr) - .long SYMBOL_NAME(sys_tkill) - .long SYMBOL_NAME(sys_sendfile64) - .long SYMBOL_NAME(sys_futex) /* 240 */ - .long SYMBOL_NAME(sys_sched_setaffinity) - .long SYMBOL_NAME(sys_sched_getaffinity) - .long SYMBOL_NAME(sys_ni_syscall) - .long SYMBOL_NAME(sys_ni_syscall) - .long SYMBOL_NAME(sys_io_setup) /* 245 */ - .long SYMBOL_NAME(sys_io_destroy) - .long SYMBOL_NAME(sys_io_getevents) - .long SYMBOL_NAME(sys_io_submit) - .long SYMBOL_NAME(sys_io_cancel) - .long SYMBOL_NAME(sys_fadvise64) /* 250 */ - .long SYMBOL_NAME(sys_ni_syscall) - .long SYMBOL_NAME(sys_exit_group) - .long SYMBOL_NAME(sys_lookup_dcookie) - .long SYMBOL_NAME(sys_epoll_create) - .long SYMBOL_NAME(sys_epoll_ctl) /* 255 */ - .long SYMBOL_NAME(sys_epoll_wait) - .long SYMBOL_NAME(sys_ni_syscall) /* sys_remap_file_pages */ - .long SYMBOL_NAME(sys_set_tid_address) - .long SYMBOL_NAME(sys_timer_create) - .long SYMBOL_NAME(sys_timer_settime) /* 260 */ - .long SYMBOL_NAME(sys_timer_gettime) - .long SYMBOL_NAME(sys_timer_getoverrun) - .long SYMBOL_NAME(sys_timer_delete) - .long SYMBOL_NAME(sys_clock_settime) - .long SYMBOL_NAME(sys_clock_gettime) /* 265 */ - .long SYMBOL_NAME(sys_clock_getres) - .long SYMBOL_NAME(sys_clock_nanosleep) - .long SYMBOL_NAME(sys_statfs64) - .long SYMBOL_NAME(sys_fstatfs64) - .long SYMBOL_NAME(sys_tgkill) /* 270 */ - .long SYMBOL_NAME(sys_utimes) - .long SYMBOL_NAME(sys_fadvise64_64) - .long SYMBOL_NAME(sys_ni_syscall) /* sys_vserver */ - .long SYMBOL_NAME(sys_ni_syscall) - .long SYMBOL_NAME(sys_get_mempolicy) /* 275 */ - .long SYMBOL_NAME(sys_set_mempolicy) - .long SYMBOL_NAME(sys_mq_open) - .long SYMBOL_NAME(sys_mq_unlink) - .long SYMBOL_NAME(sys_mq_timedsend) - .long SYMBOL_NAME(sys_mq_timedreceive) /* 280 */ - .long SYMBOL_NAME(sys_mq_notify) - .long SYMBOL_NAME(sys_mq_getsetattr) - .long SYMBOL_NAME(sys_waitid) - .long SYMBOL_NAME(sys_ni_syscall) /* sys_kexec_load */ - .long SYMBOL_NAME(sys_add_key) /* 285 */ - .long SYMBOL_NAME(sys_request_key) - .long SYMBOL_NAME(sys_keyctl) - .long SYMBOL_NAME(sys_ioprio_set) - .long SYMBOL_NAME(sys_ioprio_get) /* 290 */ - .long SYMBOL_NAME(sys_inotify_init) - .long SYMBOL_NAME(sys_inotify_add_watch) - .long SYMBOL_NAME(sys_inotify_rm_watch) - .long SYMBOL_NAME(sys_migrate_pages) - .long SYMBOL_NAME(sys_openat) /* 295 */ - .long SYMBOL_NAME(sys_mkdirat) - .long SYMBOL_NAME(sys_mknodat) - .long SYMBOL_NAME(sys_fchownat) - .long SYMBOL_NAME(sys_futimesat) - .long SYMBOL_NAME(sys_fstatat64) /* 300 */ - .long SYMBOL_NAME(sys_unlinkat) - .long SYMBOL_NAME(sys_renameat) - .long SYMBOL_NAME(sys_linkat) - .long SYMBOL_NAME(sys_symlinkat) - .long SYMBOL_NAME(sys_readlinkat) /* 305 */ - .long SYMBOL_NAME(sys_fchmodat) - .long SYMBOL_NAME(sys_faccessat) - .long SYMBOL_NAME(sys_ni_syscall) /* sys_pselect6 */ - .long SYMBOL_NAME(sys_ni_syscall) /* sys_ppoll */ - .long SYMBOL_NAME(sys_unshare) /* 310 */ - .long SYMBOL_NAME(sys_set_robust_list) - .long SYMBOL_NAME(sys_get_robust_list) - .long SYMBOL_NAME(sys_splice) - .long SYMBOL_NAME(sys_sync_file_range) - .long SYMBOL_NAME(sys_tee) /* 315 */ - .long SYMBOL_NAME(sys_vmsplice) - .long SYMBOL_NAME(sys_ni_syscall) /* sys_move_pages */ - .long SYMBOL_NAME(sys_getcpu) - .long SYMBOL_NAME(sys_ni_syscall) /* sys_epoll_pwait */ - - .macro call_sp addr - mov.l #SYMBOL_NAME(\addr),er6 - bra SYMBOL_NAME(syscall_trampoline):8 - .endm - -SYMBOL_NAME_LABEL(sys_clone) - call_sp h8300_clone - -SYMBOL_NAME_LABEL(sys_sigsuspend) - call_sp do_sigsuspend - -SYMBOL_NAME_LABEL(sys_rt_sigsuspend) - call_sp do_rt_sigsuspend - -SYMBOL_NAME_LABEL(sys_sigreturn) - call_sp do_sigreturn - -SYMBOL_NAME_LABEL(sys_rt_sigreturn) - call_sp do_rt_sigreturn - -SYMBOL_NAME_LABEL(sys_fork) - call_sp h8300_fork - -SYMBOL_NAME_LABEL(sys_vfork) - call_sp h8300_vfork - -SYMBOL_NAME_LABEL(syscall_trampoline) - mov.l sp,er0 - jmp @er6 diff --git a/arch/h8300/kernel/time.c b/arch/h8300/kernel/time.c deleted file mode 100644 index e37c835e67c..00000000000 --- a/arch/h8300/kernel/time.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * linux/arch/h8300/kernel/time.c - * - * Yoshinori Sato <ysato@users.sourceforge.jp> - * - * Copied/hacked from: - * - * linux/arch/m68k/kernel/time.c - * - * Copyright (C) 1991, 1992, 1995 Linus Torvalds - * - * This file contains the m68k-specific time handling details. - * Most of the stuff is located in the machine specific files. - * - * 1997-09-10 Updated NTP code according to technical memorandum Jan '96 - * "A Kernel Model for Precision Timekeeping" by Dave Mills - */ - -#include <linux/errno.h> -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/timex.h> -#include <linux/profile.h> - -#include <asm/io.h> -#include <asm/target_time.h> - -#define TICK_SIZE (tick_nsec / 1000) - -/* - * timer_interrupt() needs to keep up the real-time clock, - * as well as call the "do_timer()" routine every clocktick - */ -static void timer_interrupt(int irq, void *dummy, struct pt_regs * regs) -{ - /* may need to kick the hardware timer */ - platform_timer_eoi(); - - do_timer(1); -#ifndef CONFIG_SMP - update_process_times(user_mode(regs)); -#endif - profile_tick(CPU_PROFILING); -} - -void time_init(void) -{ - unsigned int year, mon, day, hour, min, sec; - - /* FIX by dqg : Set to zero for platforms that don't have tod */ - /* without this time is undefined and can overflow time_t, causing */ - /* very strange errors */ - year = 1980; - mon = day = 1; - hour = min = sec = 0; - platform_gettod (&year, &mon, &day, &hour, &min, &sec); - - if ((year += 1900) < 1970) - year += 100; - xtime.tv_sec = mktime(year, mon, day, hour, min, sec); - xtime.tv_nsec = 0; - - platform_timer_setup(timer_interrupt); -} diff --git a/arch/h8300/kernel/traps.c b/arch/h8300/kernel/traps.c deleted file mode 100644 index f8f7d7ea97f..00000000000 --- a/arch/h8300/kernel/traps.c +++ /dev/null @@ -1,169 +0,0 @@ -/* - * linux/arch/h8300/boot/traps.c -- general exception handling code - * H8/300 support Yoshinori Sato <ysato@users.sourceforge.jp> - * - * Cloned from Linux/m68k. - * - * No original Copyright holder listed, - * Probable original (C) Roman Zippel (assigned DJD, 1999) - * - * Copyright 1999-2000 D. Jeff Dionne, <jeff@rt-control.com> - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - -#include <linux/types.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/module.h> - -#include <asm/system.h> -#include <asm/irq.h> -#include <asm/traps.h> -#include <asm/page.h> -#include <asm/gpio.h> - -/* - * this must be called very early as the kernel might - * use some instruction that are emulated on the 060 - */ - -void __init base_trap_init(void) -{ -} - -void __init trap_init (void) -{ -} - -asmlinkage void set_esp0 (unsigned long ssp) -{ - current->thread.esp0 = ssp; -} - -/* - * Generic dumping code. Used for panic and debug. - */ - -static void dump(struct pt_regs *fp) -{ - unsigned long *sp; - unsigned char *tp; - int i; - - printk("\nCURRENT PROCESS:\n\n"); - printk("COMM=%s PID=%d\n", current->comm, current->pid); - if (current->mm) { - printk("TEXT=%08x-%08x DATA=%08x-%08x BSS=%08x-%08x\n", - (int) current->mm->start_code, - (int) current->mm->end_code, - (int) current->mm->start_data, - (int) current->mm->end_data, - (int) current->mm->end_data, - (int) current->mm->brk); - printk("USER-STACK=%08x KERNEL-STACK=%08lx\n\n", - (int) current->mm->start_stack, - (int) PAGE_SIZE+(unsigned long)current); - } - - show_regs(fp); - printk("\nCODE:"); - tp = ((unsigned char *) fp->pc) - 0x20; - for (sp = (unsigned long *) tp, i = 0; (i < 0x40); i += 4) { - if ((i % 0x10) == 0) - printk("\n%08x: ", (int) (tp + i)); - printk("%08x ", (int) *sp++); - } - printk("\n"); - - printk("\nKERNEL STACK:"); - tp = ((unsigned char *) fp) - 0x40; - for (sp = (unsigned long *) tp, i = 0; (i < 0xc0); i += 4) { - if ((i % 0x10) == 0) - printk("\n%08x: ", (int) (tp + i)); - printk("%08x ", (int) *sp++); - } - printk("\n"); - if (STACK_MAGIC != *(unsigned long *)((unsigned long)current+PAGE_SIZE)) - printk("(Possibly corrupted stack page??)\n"); - - printk("\n\n"); -} - -void die_if_kernel (char *str, struct pt_regs *fp, int nr) -{ - extern int console_loglevel; - - if (!(fp->ccr & PS_S)) - return; - - console_loglevel = 15; - dump(fp); - - do_exit(SIGSEGV); -} - -extern char _start, _etext; -#define check_kernel_text(addr) \ - ((addr >= (unsigned long)(&_start)) && \ - (addr < (unsigned long)(&_etext))) - -static int kstack_depth_to_print = 24; - -void show_stack(struct task_struct *task, unsigned long *esp) -{ - unsigned long *stack, addr; - int i; - - if (esp == NULL) - esp = (unsigned long *) &esp; - - stack = esp; - - printk("Stack from %08lx:", (unsigned long)stack); - for (i = 0; i < kstack_depth_to_print; i++) { - if (((unsigned long)stack & (THREAD_SIZE - 1)) == 0) - break; - if (i % 8 == 0) - printk("\n "); - printk(" %08lx", *stack++); - } - - printk("\nCall Trace:"); - i = 0; - stack = esp; - while (((unsigned long)stack & (THREAD_SIZE - 1)) != 0) { - addr = *stack++; - /* - * If the address is either in the text segment of the - * kernel, or in the region which contains vmalloc'ed - * memory, it *may* be the address of a calling - * routine; if so, print it so that someone tracing - * down the cause of the crash will be able to figure - * out the call path that was taken. - */ - if (check_kernel_text(addr)) { - if (i % 4 == 0) - printk("\n "); - printk(" [<%08lx>]", addr); - i++; - } - } - printk("\n"); -} - -void show_trace_task(struct task_struct *tsk) -{ - show_stack(tsk,(unsigned long *)tsk->thread.esp0); -} - -void dump_stack(void) -{ - show_stack(NULL,NULL); -} - -EXPORT_SYMBOL(dump_stack); diff --git a/arch/h8300/kernel/vmlinux.lds.S b/arch/h8300/kernel/vmlinux.lds.S deleted file mode 100644 index 43a87b9085b..00000000000 --- a/arch/h8300/kernel/vmlinux.lds.S +++ /dev/null @@ -1,168 +0,0 @@ -#define VMLINUX_SYMBOL(_sym_) _##_sym_ -#include <asm-generic/vmlinux.lds.h> - -/* target memory map */ -#ifdef CONFIG_H8300H_GENERIC -#define ROMTOP 0x000000 -#define ROMSIZE 0x400000 -#define RAMTOP 0x400000 -#define RAMSIZE 0x400000 -#endif - -#ifdef CONFIG_H8300H_AKI3068NET -#define ROMTOP 0x000000 -#define ROMSIZE 0x080000 -#define RAMTOP 0x400000 -#define RAMSIZE 0x200000 -#endif - -#ifdef CONFIG_H8300H_H8MAX -#define ROMTOP 0x000000 -#define ROMSIZE 0x080000 -#define RAMTOP 0x400000 -#define RAMSIZE 0x200000 -#endif - -#ifdef CONFIG_H8300H_SIM -#define ROMTOP 0x000000 -#define ROMSIZE 0x400000 -#define RAMTOP 0x400000 -#define RAMSIZE 0x400000 -#endif - -#ifdef CONFIG_H8S_SIM -#define ROMTOP 0x000000 -#define ROMSIZE 0x400000 -#define RAMTOP 0x400000 -#define RAMSIZE 0x800000 -#endif - -#ifdef CONFIG_H8S_EDOSK2674 -#define ROMTOP 0x000000 -#define ROMSIZE 0x400000 -#define RAMTOP 0x400000 -#define RAMSIZE 0x800000 -#endif - -#if defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM) -INPUT(romfs.o) -#endif - -_jiffies = _jiffies_64 + 4; - -ENTRY(__start) - -SECTIONS -{ -#if defined(CONFIG_ROMKERNEL) - . = ROMTOP; - .vectors : - { - __vector = . ; - *(.vectors*) - } -#else - . = RAMTOP; - .bootvec : - { - *(.bootvec) - } -#endif - .text : - { - _text = .; -#if defined(CONFIG_ROMKERNEL) - *(.int_redirect) -#endif - __stext = . ; - TEXT_TEXT - SCHED_TEXT - LOCK_TEXT - __etext = . ; - . = ALIGN(16); /* Exception table */ - ___start___ex_table = .; - *(__ex_table) - ___stop___ex_table = .; - } - - RODATA -#if defined(CONFIG_ROMKERNEL) - SECURITY_INIT -#endif - ROEND = .; -#if defined(CONFIG_ROMKERNEL) - . = RAMTOP; - .data : AT(ROEND) -#else - .data : -#endif - { - __sdata = . ; - ___data_start = . ; - - . = ALIGN(0x2000) ; - *(.data.init_task) - . = ALIGN(0x4) ; - DATA_DATA - . = ALIGN(0x4) ; - *(.data.*) - - . = ALIGN(0x4) ; - ___init_begin = .; - __sinittext = .; - INIT_TEXT - __einittext = .; - INIT_DATA - . = ALIGN(0x4) ; - ___setup_start = .; - *(.init.setup) - . = ALIGN(0x4) ; - ___setup_end = .; - ___initcall_start = .; - INITCALLS - ___initcall_end = .; - ___con_initcall_start = .; - *(.con_initcall.init) - ___con_initcall_end = .; - EXIT_TEXT - EXIT_DATA -#if defined(CONFIG_BLK_DEV_INITRD) - . = ALIGN(4); - ___initramfs_start = .; - *(.init.ramfs) - ___initramfs_end = .; -#endif - . = ALIGN(0x4) ; - ___init_end = .; - __edata = . ; - } -#if defined(CONFIG_RAMKERNEL) - SECURITY_INIT -#endif - __begin_data = LOADADDR(.data); - .bss : - { - . = ALIGN(0x4) ; - __sbss = . ; - *(.bss*) - . = ALIGN(0x4) ; - *(COMMON) - . = ALIGN(0x4) ; - __ebss = . ; - __end = . ; - __ramstart = .; - } - /DISCARD/ : { - *(.exitcall.exit) - } - .romfs : - { - *(.romfs*) - } - . = RAMTOP+RAMSIZE; - .dummy : - { - COMMAND_START = . - 0x200 ; - __ramend = . ; - } -} diff --git a/arch/h8300/lib/Makefile b/arch/h8300/lib/Makefile deleted file mode 100644 index 1577f5075b1..00000000000 --- a/arch/h8300/lib/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for H8/300-specific library files.. -# - -lib-y = ashrdi3.o checksum.o memcpy.o memset.o abs.o romfs.o diff --git a/arch/h8300/lib/abs.S b/arch/h8300/lib/abs.S deleted file mode 100644 index cabdd46b41d..00000000000 --- a/arch/h8300/lib/abs.S +++ /dev/null @@ -1,21 +0,0 @@ -;;; abs.S - -#include <asm/linkage.h> - -#if defined(__H8300H__) - .h8300h -#endif -#if defined(__H8300S__) - .h8300s -#endif - .text -.global SYMBOL_NAME(abs) - -;;; int abs(int n) -SYMBOL_NAME_LABEL(abs) - mov.l er0,er0 - bpl 1f - neg.l er0 -1: - rts - diff --git a/arch/h8300/lib/ashrdi3.c b/arch/h8300/lib/ashrdi3.c deleted file mode 100644 index 78efb65e315..00000000000 --- a/arch/h8300/lib/ashrdi3.c +++ /dev/null @@ -1,63 +0,0 @@ -/* ashrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */ -/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc. - -This file is part of GNU CC. - -GNU CC is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 2, or (at your option) -any later version. - -GNU CC is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with GNU CC; see the file COPYING. If not, write to -the Free Software Foundation, 59 Temple Place - Suite 330, -Boston, MA 02111-1307, USA. */ - -#define BITS_PER_UNIT 8 - -typedef int SItype __attribute__ ((mode (SI))); -typedef unsigned int USItype __attribute__ ((mode (SI))); -typedef int DItype __attribute__ ((mode (DI))); -typedef int word_type __attribute__ ((mode (__word__))); - -struct DIstruct {SItype high, low;}; - -typedef union -{ - struct DIstruct s; - DItype ll; -} DIunion; - -DItype -__ashrdi3 (DItype u, word_type b) -{ - DIunion w; - word_type bm; - DIunion uu; - - if (b == 0) - return u; - - uu.ll = u; - - bm = (sizeof (SItype) * BITS_PER_UNIT) - b; - if (bm <= 0) - { - /* w.s.high = 1..1 or 0..0 */ - w.s.high = uu.s.high >> (sizeof (SItype) * BITS_PER_UNIT - 1); - w.s.low = uu.s.high >> -bm; - } - else - { - USItype carries = (USItype)uu.s.high << bm; - w.s.high = uu.s.high >> b; - w.s.low = ((USItype)uu.s.low >> b) | carries; - } - - return w.ll; -} diff --git a/arch/h8300/lib/checksum.c b/arch/h8300/lib/checksum.c deleted file mode 100644 index bdc5b032acd..00000000000 --- a/arch/h8300/lib/checksum.c +++ /dev/null @@ -1,164 +0,0 @@ -/* - * INET An implementation of the TCP/IP protocol suite for the LINUX - * operating system. INET is implemented using the BSD Socket - * interface as the means of communication with the user level. - * - * IP/TCP/UDP checksumming routines - * - * Authors: Jorge Cwik, <jorge@laser.satlink.net> - * Arnt Gulbrandsen, <agulbra@nvg.unit.no> - * Tom May, <ftom@netcom.com> - * Andreas Schwab, <schwab@issan.informatik.uni-dortmund.de> - * Lots of code moved from tcp.c and ip.c; see those files - * for more names. - * - * 03/02/96 Jes Sorensen, Andreas Schwab, Roman Hodek: - * Fixed some nasty bugs, causing some horrible crashes. - * A: At some points, the sum (%0) was used as - * length-counter instead of the length counter - * (%1). Thanks to Roman Hodek for pointing this out. - * B: GCC seems to mess up if one uses too many - * data-registers to hold input values and one tries to - * specify d0 and d1 as scratch registers. Letting gcc choose these - * registers itself solves the problem. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access kills, so most - of the assembly has to go. */ - -#include <net/checksum.h> -#include <linux/module.h> - -static inline unsigned short from32to16(unsigned long x) -{ - /* add up 16-bit and 16-bit for 16+c bit */ - x = (x & 0xffff) + (x >> 16); - /* add up carry.. */ - x = (x & 0xffff) + (x >> 16); - return x; -} - -static unsigned long do_csum(const unsigned char * buff, int len) -{ - int odd, count; - unsigned long result = 0; - - if (len <= 0) - goto out; - odd = 1 & (unsigned long) buff; - if (odd) { - result = *buff; - len--; - buff++; - } - count = len >> 1; /* nr of 16-bit words.. */ - if (count) { - if (2 & (unsigned long) buff) { - result += *(unsigned short *) buff; - count--; - len -= 2; - buff += 2; - } - count >>= 1; /* nr of 32-bit words.. */ - if (count) { - unsigned long carry = 0; - do { - unsigned long w = *(unsigned long *) buff; - count--; - buff += 4; - result += carry; - result += w; - carry = (w > result); - } while (count); - result += carry; - result = (result & 0xffff) + (result >> 16); - } - if (len & 2) { - result += *(unsigned short *) buff; - buff += 2; - } - } - if (len & 1) - result += (*buff << 8); - result = from32to16(result); - if (odd) - result = ((result >> 8) & 0xff) | ((result & 0xff) << 8); -out: - return result; -} - -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. - */ -__sum16 ip_fast_csum(const void *iph, unsigned int ihl) -{ - return (__force __sum16)~do_csum(iph,ihl*4); -} - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -/* - * Egads... That thing apparently assumes that *all* checksums it ever sees will - * be folded. Very likely a bug. - */ -__wsum csum_partial(const void *buff, int len, __wsum sum) -{ - unsigned int result = do_csum(buff, len); - - /* add in old sum, and carry.. */ - result += (__force u32)sum; - /* 16+c bits -> 16 bits */ - result = (result & 0xffff) + (result >> 16); - return (__force __wsum)result; -} - -EXPORT_SYMBOL(csum_partial); - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ -__sum16 ip_compute_csum(const void *buff, int len) -{ - return (__force __sum16)~do_csum(buff,len); -} - -/* - * copy from fs while checksumming, otherwise like csum_partial - */ - -__wsum -csum_partial_copy_from_user(const void __user *src, void *dst, int len, - __wsum sum, int *csum_err) -{ - if (csum_err) *csum_err = 0; - memcpy(dst, (__force const void *)src, len); - return csum_partial(dst, len, sum); -} - -/* - * copy from ds while checksumming, otherwise like csum_partial - */ - -__wsum -csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum) -{ - memcpy(dst, src, len); - return csum_partial(dst, len, sum); -} diff --git a/arch/h8300/lib/memcpy.S b/arch/h8300/lib/memcpy.S deleted file mode 100644 index fdcbc1ee673..00000000000 --- a/arch/h8300/lib/memcpy.S +++ /dev/null @@ -1,84 +0,0 @@ -;;; memcpy.S - -#include <asm/linkage.h> - -#if defined(__H8300H__) - .h8300h -#endif -#if defined(__H8300S__) - .h8300s -#endif - - .text -.global SYMBOL_NAME(memcpy) - -;;; void *memcpy(void *to, void *from, size_t n) -SYMBOL_NAME_LABEL(memcpy) - mov.l er2,er2 - bne 1f - rts -1: - ;; address check - bld #0,r0l - bxor #0,r1l - bcs 4f - mov.l er4,@-sp - mov.l er0,@-sp - btst #0,r0l - beq 1f - ;; (aligned even) odd address - mov.b @er1,r3l - mov.b r3l,@er0 - adds #1,er1 - adds #1,er0 - dec.l #1,er2 - beq 3f -1: - ;; n < sizeof(unsigned long) check - sub.l er4,er4 - adds #4,er4 ; loop count check value - cmp.l er4,er2 - blo 2f - ;; unsigned long copy -1: - mov.l @er1,er3 - mov.l er3,@er0 - adds #4,er0 - adds #4,er1 - subs #4,er2 - cmp.l er4,er2 - bcc 1b - ;; rest -2: - mov.l er2,er2 - beq 3f -1: - mov.b @er1,r3l - mov.b r3l,@er0 - adds #1,er1 - adds #1,er0 - dec.l #1,er2 - bne 1b -3: - mov.l @sp+,er0 - mov.l @sp+,er4 - rts - - ;; odd <- even / even <- odd -4: - mov.l er4,er3 - mov.l er2,er4 - mov.l er5,er2 - mov.l er1,er5 - mov.l er6,er1 - mov.l er0,er6 -1: - eepmov.w - mov.w r4,r4 - bne 1b - dec.w #1,e4 - bpl 1b - mov.l er1,er6 - mov.l er2,er5 - mov.l er3,er4 - rts diff --git a/arch/h8300/lib/memset.S b/arch/h8300/lib/memset.S deleted file mode 100644 index 59abdf9485a..00000000000 --- a/arch/h8300/lib/memset.S +++ /dev/null @@ -1,61 +0,0 @@ -/* memset.S */ - -#include <asm/linkage.h> - -#if defined(__H8300H__) - .h8300h -#endif -#if defined(__H8300S__) - .h8300s -#endif - .text - -.global SYMBOL_NAME(memset) - -;;void *memset(*ptr, int c, size_t count) -;; ptr = er0 -;; c = er1(r1l) -;; count = er2 -SYMBOL_NAME_LABEL(memset) - btst #0,r0l - beq 2f - - ;; odd address -1: - mov.b r1l,@er0 - adds #1,er0 - dec.l #1,er2 - beq 6f - - ;; even address -2: - mov.l er2,er3 - cmp.l #4,er2 - blo 4f - ;; count>=4 -> count/4 -#if defined(__H8300H__) - shlr.l er2 - shlr.l er2 -#endif -#if defined(__H8300S__) - shlr.l #2,er2 -#endif - ;; byte -> long - mov.b r1l,r1h - mov.w r1,e1 -3: - mov.l er1,@er0 - adds #4,er0 - dec.l #1,er2 - bne 3b -4: - ;; count % 4 - and.b #3,r3l - beq 6f -5: - mov.b r1l,@er0 - adds #1,er0 - dec.b r3l - bne 5b -6: - rts diff --git a/arch/h8300/lib/romfs.S b/arch/h8300/lib/romfs.S deleted file mode 100644 index 68910d8e1ff..00000000000 --- a/arch/h8300/lib/romfs.S +++ /dev/null @@ -1,57 +0,0 @@ -/* romfs move to __ebss */ - -#include <asm/linkage.h> - -#if defined(__H8300H__) - .h8300h -#endif -#if defined(__H8300S__) - .h8300s -#endif - -#define BLKOFFSET 512 - - .text -.globl __move_romfs -_romfs_sig_len = 8 - -__move_romfs: - mov.l #__sbss,er0 - mov.l #_romfs_sig,er1 - mov.b #_romfs_sig_len,r3l -1: /* check romfs image */ - mov.b @er0+,r2l - mov.b @er1+,r2h - cmp.b r2l,r2h - bne 2f - dec.b r3l - bne 1b - - /* find romfs image */ - mov.l @__sbss+8,er0 /* romfs length(be) */ - mov.l #__sbss,er1 - add.l er0,er1 /* romfs image end */ - mov.l #__ebss,er2 - add.l er0,er2 /* distination address */ -#if defined(CONFIG_INTELFLASH) - add.l #BLKOFFSET,er2 -#endif - adds #2,er0 - adds #1,er0 - shlr er0 - shlr er0 /* transfer length */ -1: - mov.l @er1,er3 /* copy image */ - mov.l er3,@er2 - subs #4,er1 - subs #4,er2 - dec.l #1,er0 - bpl 1b -2: - rts - - .section .rodata -_romfs_sig: - .ascii "-rom1fs-" - - .end diff --git a/arch/h8300/mm/Makefile b/arch/h8300/mm/Makefile deleted file mode 100644 index 5f4bc42b645..00000000000 --- a/arch/h8300/mm/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the linux m68k-specific parts of the memory manager. -# - -obj-y := init.o fault.o memory.o kmap.o diff --git a/arch/h8300/mm/fault.c b/arch/h8300/mm/fault.c deleted file mode 100644 index 29e9af9f0e6..00000000000 --- a/arch/h8300/mm/fault.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * linux/arch/h8300/mm/fault.c - * - * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>, - * Copyright (C) 2000 Lineo, Inc. (www.lineo.com) - * - * Based on: - * - * linux/arch/m68knommu/mm/fault.c - * linux/arch/m68k/mm/fault.c - * - * Copyright (C) 1995 Hamish Macdonald - */ - -#include <linux/mman.h> -#include <linux/mm.h> -#include <linux/kernel.h> -#include <linux/ptrace.h> - -#include <asm/system.h> -#include <asm/pgtable.h> - -extern void die_if_kernel(char *, struct pt_regs *, long); - -/* - * This routine handles page faults. It determines the problem, and - * then passes it off to one of the appropriate routines. - * - * error_code: - * bit 0 == 0 means no page found, 1 means protection fault - * bit 1 == 0 means read, 1 means write - * - * If this routine detects a bad access, it returns 1, otherwise it - * returns 0. - */ -asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address, - unsigned long error_code) -{ -#ifdef DEBUG - printk ("regs->sr=%#x, regs->pc=%#lx, address=%#lx, %ld\n", - regs->sr, regs->pc, address, error_code); -#endif - -/* - * Oops. The kernel tried to access some bad page. We'll have to - * terminate things with extreme prejudice. - */ - if ((unsigned long) address < PAGE_SIZE) { - printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference"); - } else - printk(KERN_ALERT "Unable to handle kernel access"); - printk(" at virtual address %08lx\n",address); - die_if_kernel("Oops", regs, error_code); - do_exit(SIGKILL); - - return 1; -} - diff --git a/arch/h8300/mm/init.c b/arch/h8300/mm/init.c deleted file mode 100644 index a1d228f5e4e..00000000000 --- a/arch/h8300/mm/init.c +++ /dev/null @@ -1,204 +0,0 @@ -/* - * linux/arch/h8300/mm/init.c - * - * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>, - * Kenneth Albanowski <kjahds@kjahds.com>, - * Copyright (C) 2000 Lineo, Inc. (www.lineo.com) - * - * Based on: - * - * linux/arch/m68knommu/mm/init.c - * linux/arch/m68k/mm/init.c - * - * Copyright (C) 1995 Hamish Macdonald - * - * JAN/1999 -- hacked to support ColdFire (gerg@snapgear.com) - * DEC/2000 -- linux 2.4 support <davidm@snapgear.com> - */ - -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/types.h> -#include <linux/ptrace.h> -#include <linux/mman.h> -#include <linux/mm.h> -#include <linux/swap.h> -#include <linux/init.h> -#include <linux/highmem.h> -#include <linux/pagemap.h> -#include <linux/bootmem.h> -#include <linux/slab.h> - -#include <asm/setup.h> -#include <asm/segment.h> -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/system.h> - -#undef DEBUG - -extern void die_if_kernel(char *,struct pt_regs *,long); -extern void free_initmem(void); - -/* - * BAD_PAGE is the page that is used for page faults when linux - * is out-of-memory. Older versions of linux just did a - * do_exit(), but using this instead means there is less risk - * for a process dying in kernel mode, possibly leaving a inode - * unused etc.. - * - * BAD_PAGETABLE is the accompanying page-table: it is initialized - * to point to BAD_PAGE entries. - * - * ZERO_PAGE is a special page that is used for zero-initialized - * data and COW. - */ -static unsigned long empty_bad_page_table; - -static unsigned long empty_bad_page; - -unsigned long empty_zero_page; - -extern unsigned long rom_length; - -extern unsigned long memory_start; -extern unsigned long memory_end; - -/* - * paging_init() continues the virtual memory environment setup which - * was begun by the code in arch/head.S. - * The parameters are pointers to where to stick the starting and ending - * addresses of available kernel virtual memory. - */ -void paging_init(void) -{ - /* - * Make sure start_mem is page aligned, otherwise bootmem and - * page_alloc get different views og the world. - */ -#ifdef DEBUG - unsigned long start_mem = PAGE_ALIGN(memory_start); -#endif - unsigned long end_mem = memory_end & PAGE_MASK; - -#ifdef DEBUG - printk ("start_mem is %#lx\nvirtual_end is %#lx\n", - start_mem, end_mem); -#endif - - /* - * Initialize the bad page table and bad page to point - * to a couple of allocated pages. - */ - empty_bad_page_table = (unsigned long)alloc_bootmem_pages(PAGE_SIZE); - empty_bad_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE); - empty_zero_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE); - memset((void *)empty_zero_page, 0, PAGE_SIZE); - - /* - * Set up SFC/DFC registers (user data space). - */ - set_fs (USER_DS); - -#ifdef DEBUG - printk ("before free_area_init\n"); - - printk ("free_area_init -> start_mem is %#lx\nvirtual_end is %#lx\n", - start_mem, end_mem); -#endif - - { - unsigned long zones_size[MAX_NR_ZONES] = {0, }; - - zones_size[ZONE_DMA] = 0 >> PAGE_SHIFT; - zones_size[ZONE_NORMAL] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT; -#ifdef CONFIG_HIGHMEM - zones_size[ZONE_HIGHMEM] = 0; -#endif - free_area_init(zones_size); - } -} - -void mem_init(void) -{ - int codek = 0, datak = 0, initk = 0; - /* DAVIDM look at setup memory map generically with reserved area */ - unsigned long tmp; - extern char _etext, _stext, _sdata, _ebss, __init_begin, __init_end; - extern unsigned long _ramend, _ramstart; - unsigned long len = &_ramend - &_ramstart; - unsigned long start_mem = memory_start; /* DAVIDM - these must start at end of kernel */ - unsigned long end_mem = memory_end; /* DAVIDM - this must not include kernel stack at top */ - -#ifdef DEBUG - printk(KERN_DEBUG "Mem_init: start=%lx, end=%lx\n", start_mem, end_mem); -#endif - - end_mem &= PAGE_MASK; - high_memory = (void *) end_mem; - - start_mem = PAGE_ALIGN(start_mem); - max_mapnr = num_physpages = MAP_NR(high_memory); - - /* this will put all memory onto the freelists */ - totalram_pages = free_all_bootmem(); - - codek = (&_etext - &_stext) >> 10; - datak = (&_ebss - &_sdata) >> 10; - initk = (&__init_begin - &__init_end) >> 10; - - tmp = nr_free_pages() << PAGE_SHIFT; - printk(KERN_INFO "Memory available: %luk/%luk RAM, %luk/%luk ROM (%dk kernel code, %dk data)\n", - tmp >> 10, - len >> 10, - (rom_length > 0) ? ((rom_length >> 10) - codek) : 0, - rom_length >> 10, - codek, - datak - ); -} - - -#ifdef CONFIG_BLK_DEV_INITRD -void free_initrd_mem(unsigned long start, unsigned long end) -{ - int pages = 0; - for (; start < end; start += PAGE_SIZE) { - ClearPageReserved(virt_to_page(start)); - init_page_count(virt_to_page(start)); - free_page(start); - totalram_pages++; - pages++; - } - printk ("Freeing initrd memory: %dk freed\n", pages); -} -#endif - -void -free_initmem() -{ -#ifdef CONFIG_RAMKERNEL - unsigned long addr; - extern char __init_begin, __init_end; -/* - * the following code should be cool even if these sections - * are not page aligned. - */ - addr = PAGE_ALIGN((unsigned long)(&__init_begin)); - /* next to check that the page we free is not a partial page */ - for (; addr + PAGE_SIZE < (unsigned long)(&__init_end); addr +=PAGE_SIZE) { - ClearPageReserved(virt_to_page(addr)); - init_page_count(virt_to_page(addr)); - free_page(addr); - totalram_pages++; - } - printk(KERN_INFO "Freeing unused kernel memory: %ldk freed (0x%x - 0x%x)\n", - (addr - PAGE_ALIGN((long) &__init_begin)) >> 10, - (int)(PAGE_ALIGN((unsigned long)(&__init_begin))), - (int)(addr - PAGE_SIZE)); -#endif -} - diff --git a/arch/h8300/mm/kmap.c b/arch/h8300/mm/kmap.c deleted file mode 100644 index 5c7af09ae8d..00000000000 --- a/arch/h8300/mm/kmap.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * linux/arch/h8300/mm/kmap.c - * - * Based on - * linux/arch/m68knommu/mm/kmap.c - * - * Copyright (C) 2000 Lineo, <davidm@snapgear.com> - * Copyright (C) 2000-2002 David McCullough <davidm@snapgear.com> - */ - -#include <linux/mm.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/types.h> -#include <linux/slab.h> -#include <linux/vmalloc.h> - -#include <asm/setup.h> -#include <asm/segment.h> -#include <asm/page.h> -#include <asm/pgalloc.h> -#include <asm/io.h> -#include <asm/system.h> - -#undef DEBUG - -#define VIRT_OFFSET (0x01000000) - -/* - * Map some physical address range into the kernel address space. - */ -void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag) -{ - return (void *)(physaddr + VIRT_OFFSET); -} - -/* - * Unmap a ioremap()ed region again. - */ -void iounmap(void *addr) -{ -} - -/* - * __iounmap unmaps nearly everything, so be careful - * it doesn't free currently pointer/page tables anymore but it - * wans't used anyway and might be added later. - */ -void __iounmap(void *addr, unsigned long size) -{ -} - -/* - * Set new cache mode for some kernel address space. - * The caller must push data for that range itself, if such data may already - * be in the cache. - */ -void kernel_set_cachemode(void *addr, unsigned long size, int cmode) -{ -} diff --git a/arch/h8300/mm/memory.c b/arch/h8300/mm/memory.c deleted file mode 100644 index ccd6ade816d..00000000000 --- a/arch/h8300/mm/memory.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * linux/arch/h8300/mm/memory.c - * - * Copyright (C) 2002 Yoshinori Sato <ysato@users.sourceforge.jp>, - * - * Based on: - * - * linux/arch/m68knommu/mm/memory.c - * - * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>, - * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com) - * - * Based on: - * - * linux/arch/m68k/mm/memory.c - * - * Copyright (C) 1995 Hamish Macdonald - */ - -#include <linux/mm.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/types.h> -#include <linux/slab.h> - -#include <asm/setup.h> -#include <asm/segment.h> -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/system.h> -#include <asm/traps.h> -#include <asm/io.h> - -void cache_clear (unsigned long paddr, int len) -{ -} - - -void cache_push (unsigned long paddr, int len) -{ -} - -void cache_push_v (unsigned long vaddr, int len) -{ -} - -/* Map some physical address range into the kernel address space. The - * code is copied and adapted from map_chunk(). - */ - -unsigned long kernel_map(unsigned long paddr, unsigned long size, - int nocacheflag, unsigned long *memavailp ) -{ - return paddr; -} - diff --git a/arch/h8300/platform/h8300h/Makefile b/arch/h8300/platform/h8300h/Makefile deleted file mode 100644 index 420f73b0d96..00000000000 --- a/arch/h8300/platform/h8300h/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for the linux kernel. -# -# Reuse any files we can from the H8/300H -# - -obj-y := irq.o ptrace_h8300h.o diff --git a/arch/h8300/platform/h8300h/aki3068net/Makefile b/arch/h8300/platform/h8300h/aki3068net/Makefile deleted file mode 100644 index b03c328f8c7..00000000000 --- a/arch/h8300/platform/h8300h/aki3068net/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for the linux kernel. -# - -extra-y := crt0_ram.o -obj-y := timer.o diff --git a/arch/h8300/platform/h8300h/aki3068net/crt0_ram.S b/arch/h8300/platform/h8300h/aki3068net/crt0_ram.S deleted file mode 100644 index ecaeb31ae9a..00000000000 --- a/arch/h8300/platform/h8300h/aki3068net/crt0_ram.S +++ /dev/null @@ -1,110 +0,0 @@ -/* - * linux/arch/h8300/platform/h8300h/aki3068net/crt0_ram.S - * - * Yoshinori Sato <ysato@users.sourceforge.jp> - * - * Platform depend startup - * Target Archtecture: AE-3068 (aka. aki3068net) - * Memory Layout : RAM - */ - -#define ASSEMBLY - -#include <asm/linkage.h> - -#if !defined(CONFIG_BLKDEV_RESERVE) -#if defined(CONFIG_GDB_DEBUG) -#define RAMEND (__ramend - 0xc000) -#else -#define RAMEND __ramend -#endif -#else -#define RAMEND CONFIG_BLKDEV_RESERVE_ADDRESS -#endif - - .global SYMBOL_NAME(_start) - .global SYMBOL_NAME(command_line) - .global SYMBOL_NAME(_platform_gpio_table) - .global SYMBOL_NAME(_target_name) - - .h8300h - - .section .text - .file "crt0_ram.S" - - /* CPU Reset entry */ -SYMBOL_NAME_LABEL(_start) - mov.l #RAMEND,sp - ldc #0x80,ccr - - /* Peripheral Setup */ - -#if defined(CONFIG_MTD_UCLINUX) - /* move romfs image */ - jsr @__move_romfs -#endif - - /* .bss clear */ - mov.l #__sbss,er5 - mov.l #__ebss,er4 - sub.l er5,er4 - shlr er4 - shlr er4 - sub.l er0,er0 -1: - mov.l er0,@er5 - adds #4,er5 - dec.l #1,er4 - bne 1b - - /* copy kernel commandline */ - mov.l #COMMAND_START,er5 - mov.l #SYMBOL_NAME(command_line),er6 - mov.w #512,r4 - eepmov.w - - /* uClinux kernel start */ - ldc #0x90,ccr /* running kernel */ - mov.l #SYMBOL_NAME(init_thread_union),sp - add.l #0x2000,sp - jsr @_start_kernel -_exit: - - jmp _exit - - rts - - /* I/O port assign information */ -__platform_gpio_table: - mov.l #gpio_table,er0 - rts - -gpio_table: - ;; P1DDR - .byte 0xff,0xff - ;; P2DDR - .byte 0xff,0xff - ;; P3DDR - .byte 0xff,0x00 - ;; P4DDR - .byte 0x00,0x00 - ;; P5DDR - .byte 0x01,0x01 - ;; P6DDR - .byte 0x00,0x00 - ;; dummy - .byte 0x00,0x00 - ;; P8DDR - .byte 0x0c,0x0c - ;; P9DDR - .byte 0x00,0x00 - ;; PADDR - .byte 0x00,0x00 - ;; PBDDR - .byte 0x30,0x30 - -__target_name: - .asciz "AE-3068" - - .section .bootvec,"ax" - jmp @SYMBOL_NAME(_start) diff --git a/arch/h8300/platform/h8300h/aki3068net/timer.c b/arch/h8300/platform/h8300h/aki3068net/timer.c deleted file mode 100644 index 27cd85d5612..00000000000 --- a/arch/h8300/platform/h8300h/aki3068net/timer.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * linux/arch/h8300/platform/h8300h/aki3068net/timer.c - * - * Yoshinori Sato <ysato@users.sourcefoge.jp> - * - * Platform depend Timer Handler - * - */ - -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/timex.h> - -#include <asm/segment.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/regs306x.h> - -#define CMFA 6 - -#define CMIEA 0x40 -#define CCLR_CMA 0x08 -#define CLK_DIV8192 0x03 - -#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*1000/8192 /* Timer input freq. */ - -void __init platform_timer_setup(irqreturn_t (*timer_int)(int, void *, struct pt_regs *)) -{ - /* setup 8bit timer ch2 */ - ctrl_outb(H8300_TIMER_FREQ / HZ, TCORA2); /* set interval */ - ctrl_outb(0x00, _8TCSR2); /* no output */ - request_irq(40, timer_int, 0, "timer", 0); - ctrl_outb(CMIEA|CCLR_CMA|CLK_DIV8192, _8TCR2); /* start count */ -} - -void platform_timer_eoi(void) -{ - *(volatile unsigned char *)_8TCSR2 &= ~(1 << CMFA); -} - -void platform_gettod(int *year, int *mon, int *day, int *hour, - int *min, int *sec) -{ - *year = *mon = *day = *hour = *min = *sec = 0; -} diff --git a/arch/h8300/platform/h8300h/generic/Makefile b/arch/h8300/platform/h8300h/generic/Makefile deleted file mode 100644 index 32b964a9010..00000000000 --- a/arch/h8300/platform/h8300h/generic/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for the linux kernel. -# - -extra-y := crt0_$(MODEL).o -obj-y := timer.o diff --git a/arch/h8300/platform/h8300h/generic/crt0_ram.S b/arch/h8300/platform/h8300h/generic/crt0_ram.S deleted file mode 100644 index 80d0e16a449..00000000000 --- a/arch/h8300/platform/h8300h/generic/crt0_ram.S +++ /dev/null @@ -1,107 +0,0 @@ -/* - * linux/arch/h8300/platform/h8300h/generic/crt0_ram.S - * - * Yoshinori Sato <ysato@users.sourceforge.jp> - * - * Platform depend startup - * Target Archtecture: AE-3068 (aka. aki3068net) - * Memory Layout : RAM - */ - -#define ASSEMBLY - -#include <asm/linkage.h> - -#if !defined(CONFIG_BLKDEV_RESERVE) -#if defined(CONFIG_GDB_DEBUG) -#define RAMEND (__ramend - 0xc000) -#else -#define RAMEND __ramend -#endif -#else -#define RAMEND CONFIG_BLKDEV_RESERVE_ADDRESS -#endif - - .global SYMBOL_NAME(_start) - .global SYMBOL_NAME(command_line) - .global SYMBOL_NAME(_platform_gpio_table) - .global SYMBOL_NAME(_target_name) - - .h8300h - - .section .text - .file "crt0_ram.S" - - /* CPU Reset entry */ -SYMBOL_NAME_LABEL(_start) - mov.l #RAMEND,sp - ldc #0x80,ccr - - /* Peripheral Setup */ - -#if defined(CONFIG_BLK_DEV_BLKMEM) - /* move romfs image */ - jsr @__move_romfs -#endif - - /* .bss clear */ - mov.l #__sbss,er5 - mov.l #__ebss,er4 - sub.l er5,er4 - shlr er4 - shlr er4 - sub.l er0,er0 -1: - mov.l er0,@er5 - adds #4,er5 - dec.l #1,er4 - bne 1b - - /* copy kernel commandline */ - mov.l #COMMAND_START,er5 - mov.l #SYMBOL_NAME(command_line),er6 - mov.w #512,r4 - eepmov.w - - /* uClinux kernel start */ - ldc #0x90,ccr /* running kernel */ - mov.l #SYMBOL_NAME(init_thread_union),sp - add.l #0x2000,sp - jsr @_start_kernel -_exit: - - jmp _exit - - rts - - /* I/O port assign information */ -__platform_gpio_table: - mov.l #gpio_table,er0 - rts - -gpio_table: - ;; P1DDR - .byte 0x00,0x00 - ;; P2DDR - .byte 0x00,0x00 - ;; P3DDR - .byte 0x00,0x00 - ;; P4DDR - .byte 0x00,0x00 - ;; P5DDR - .byte 0x00,0x00 - ;; P6DDR - .byte 0x00,0x00 - ;; dummy - .byte 0x00,0x00 - ;; P8DDR - .byte 0x00,0x00 - ;; P9DDR - .byte 0x00,0x00 - ;; PADDR - .byte 0x00,0x00 - ;; PBDDR - .byte 0x00,0x00 - -__target_name: - .asciz "generic" diff --git a/arch/h8300/platform/h8300h/generic/crt0_rom.S b/arch/h8300/platform/h8300h/generic/crt0_rom.S deleted file mode 100644 index 120add7ca83..00000000000 --- a/arch/h8300/platform/h8300h/generic/crt0_rom.S +++ /dev/null @@ -1,122 +0,0 @@ -/* - * linux/arch/h8300/platform/h8300h/generic/crt0_rom.S - * - * Yoshinori Sato <ysato@users.sourceforge.jp> - * - * Platform depend startup - * Target Archtecture: generic - * Memory Layout : ROM - */ - -#define ASSEMBLY - -#include <asm/linkage.h> - - .global SYMBOL_NAME(_start) - .global SYMBOL_NAME(_command_line) - .global SYMBOL_NAME(_platform_gpio_table) - .global SYMBOL_NAME(_target_name) - - .h8300h - .section .text - .file "crt0_rom.S" - - /* CPU Reset entry */ -SYMBOL_NAME_LABEL(_start) - mov.l #__ramend,sp - ldc #0x80,ccr - - /* Peripheral Setup */ - - /* .bss clear */ - mov.l #__sbss,er5 - mov.l #__ebss,er4 - sub.l er5,er4 - shlr er4 - shlr er4 - sub.l er0,er0 -1: - mov.l er0,@er5 - adds #4,er5 - dec.l #1,er4 - bne 1b - - /* copy .data */ -#if !defined(CONFIG_H8300H_SIM) - /* copy .data */ - mov.l #__begin_data,er5 - mov.l #__sdata,er6 - mov.l #__edata,er4 - sub.l er6,er4 - shlr.l er4 - shlr.l er4 -1: - mov.l @er5+,er0 - mov.l er0,@er6 - adds #4,er6 - dec.l #1,er4 - bne 1b -#endif - - /* copy kernel commandline */ - mov.l #COMMAND_START,er5 - mov.l #SYMBOL_NAME(_command_line),er6 - mov.w #512,r4 - eepmov.w - - /* linux kernel start */ - ldc #0x90,ccr /* running kernel */ - mov.l #SYMBOL_NAME(init_thread_union),sp - add.l #0x2000,sp - jsr @_start_kernel -_exit: - - jmp _exit - - rts - - /* I/O port assign information */ -__platform_gpio_table: - mov.l #gpio_table,er0 - rts - -gpio_table: - ;; P1DDR - .byte 0x00,0x00 - ;; P2DDR - .byte 0x00,0x00 - ;; P3DDR - .byte 0x00,0x00 - ;; P4DDR - .byte 0x00,0x00 - ;; P5DDR - .byte 0x00,0x00 - ;; P6DDR - .byte 0x00,0x00 - ;; dummy - .byte 0x00,0x00 - ;; P8DDR - .byte 0x00,0x00 - ;; P9DDR - .byte 0x00,0x00 - ;; PADDR - .byte 0x00,0x00 - ;; PBDDR - .byte 0x00,0x00 - - .section .rodata -__target_name: - .asciz "generic" - - .section .bss -__command_line: - .space 512 - - /* interrupt vector */ - .section .vectors,"ax" - .long __start -vector = 1 - .rept 64-1 - .long _interrupt_redirect_table+vector*4 -vector = vector + 1 - .endr diff --git a/arch/h8300/platform/h8300h/generic/timer.c b/arch/h8300/platform/h8300h/generic/timer.c deleted file mode 100644 index 6f5cefe0cce..00000000000 --- a/arch/h8300/platform/h8300h/generic/timer.c +++ /dev/null @@ -1,95 +0,0 @@ -/* - * linux/arch/h8300/platform/h8300h/generic/timer.c - * - * Yoshinori Sato <ysato@users.sourceforge.jp> - * - * Platform depend Timer Handler - * - */ - -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/interrupt.h> - -#include <asm/segment.h> -#include <asm/io.h> -#include <asm/irq.h> - -#include <linux/timex.h> - -#if defined(CONFIG_H83007) || defined(CONFIG_H83068) -#include <asm/regs306x.h> -#define CMFA 6 - -#define CMIEA 0x40 -#define CCLR_CMA 0x08 -#define CLK_DIV8192 0x03 - -#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*1000/8192 /* Timer input freq. */ - -void __init platform_timer_setup(irqreturn_t (*timer_int)(int, void *, struct pt_regs *)) -{ - /* setup 8bit timer ch2 */ - ctrl_outb(H8300_TIMER_FREQ / HZ, TCORA2); /* set interval */ - ctrl_outb(0x00, _8TCSR2); /* no output */ - request_irq(40, timer_int, 0, "timer", 0); - ctrl_outb(CMIEA|CCLR_CMA|CLK_DIV8192, _8TCR2); /* start count */ -} - -void platform_timer_eoi(void) -{ - *(volatile unsigned char *)_8TCSR2 &= ~(1 << CMFA); -} -#endif - -#if defined(CONFIG_H83002) || defined(CONFIG_H83048) -/* FIXME! */ -#define TSTR 0x00ffff60 -#define TSNC 0x00ffff61 -#define TMDR 0x00ffff62 -#define TFCR 0x00ffff63 -#define TOER 0x00ffff90 -#define TOCR 0x00ffff91 -/* ITU0 */ -#define TCR 0x00ffff64 -#define TIOR 0x00ffff65 -#define TIER 0x00ffff66 -#define TSR 0x00ffff67 -#define TCNT 0x00ffff68 -#define GRA 0x00ffff6a -#define GRB 0x00ffff6c - -#define CCLR_CMGRA 0x20 -#define CLK_DIV8 0x03 - -#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*1000/8 /* Timer input freq. */ - -void __init platform_timer_setup(irqreturn_t (*timer_int)(int, void *, struct pt_regs *)) -{ - *(unsigned short *)GRA= H8300_TIMER_FREQ / HZ; /* set interval */ - *(unsigned short *)TCNT=0; /* clear counter */ - ctrl_outb(0x80|CCLR_CMGRA|CLK_DIV8, TCR); /* set ITU0 clock */ - ctrl_outb(0x88, TIOR); /* no output */ - request_irq(26, timer_int, 0, "timer", 0); - ctrl_outb(0xf9, TIER); /* compare match GRA interrupt */ - ctrl_outb(ctrl_inb(TSNC) & ~0x01, TSNC); /* ITU0 async */ - ctrl_outb(ctrl_inb(TMDR) & ~0x01, TMDR); /* ITU0 normal mode */ - ctrl_outb(ctrl_inb(TSTR) | 0x01, TSTR); /* ITU0 Start */ - return 0; -} - -void platform_timer_eoi(void) -{ - ctrl_outb(ctrl_inb(TSR) & ~0x01,TSR); -} -#endif - -void platform_gettod(int *year, int *mon, int *day, int *hour, - int *min, int *sec) -{ - *year = *mon = *day = *hour = *min = *sec = 0; -} diff --git a/arch/h8300/platform/h8300h/h8max/Makefile b/arch/h8300/platform/h8300h/h8max/Makefile deleted file mode 100644 index b03c328f8c7..00000000000 --- a/arch/h8300/platform/h8300h/h8max/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for the linux kernel. -# - -extra-y := crt0_ram.o -obj-y := timer.o diff --git a/arch/h8300/platform/h8300h/h8max/crt0_ram.S b/arch/h8300/platform/h8300h/h8max/crt0_ram.S deleted file mode 100644 index efcbefb91b6..00000000000 --- a/arch/h8300/platform/h8300h/h8max/crt0_ram.S +++ /dev/null @@ -1,110 +0,0 @@ -/* - * linux/arch/h8300/platform/h8300h/h8max/crt0_ram.S - * - * Yoshinori Sato <ysato@users.sourceforge.jp> - * - * Platform depend startup - * Target Archtecture: H8MAX - * Memory Layout : RAM - */ - -#define ASSEMBLY - -#include <asm/linkage.h> - -#if !defined(CONFIG_BLKDEV_RESERVE) -#if defined(CONFIG_GDB_DEBUG) -#define RAMEND (__ramend - 0xc000) -#else -#define RAMEND __ramend -#endif -#else -#define RAMEND CONFIG_BLKDEV_RESERVE_ADDRESS -#endif - - .global SYMBOL_NAME(_start) - .global SYMBOL_NAME(command_line) - .global SYMBOL_NAME(_platform_gpio_table) - .global SYMBOL_NAME(_target_name) - - .h8300h - - .section .text - .file "crt0_ram.S" - - /* CPU Reset entry */ -SYMBOL_NAME_LABEL(_start) - mov.l #RAMEND,sp - ldc #0x80,ccr - - /* Peripheral Setup */ - -#if defined(CONFIG_MTD_UCLINUX) - /* move romfs image */ - jsr @__move_romfs -#endif - - /* .bss clear */ - mov.l #__sbss,er5 - mov.l #__ebss,er4 - sub.l er5,er4 - shlr er4 - shlr er4 - sub.l er0,er0 -1: - mov.l er0,@er5 - adds #4,er5 - dec.l #1,er4 - bne 1b - - /* copy kernel commandline */ - mov.l #COMMAND_START,er5 - mov.l #SYMBOL_NAME(command_line),er6 - mov.w #512,r4 - eepmov.w - - /* uClinux kernel start */ - ldc #0x90,ccr /* running kernel */ - mov.l #SYMBOL_NAME(init_thread_union),sp - add.l #0x2000,sp - jsr @_start_kernel -_exit: - - jmp _exit - - rts - - /* I/O port assign information */ -__platform_gpio_table: - mov.l #gpio_table,er0 - rts - -gpio_table: - ;; P1DDR - .byte 0xff,0xff - ;; P2DDR - .byte 0xff,0xff - ;; P3DDR - .byte 0x00,0x00 - ;; P4DDR - .byte 0x00,0x00 - ;; P5DDR - .byte 0x01,0x01 - ;; P6DDR - .byte 0xf6,0xf6 - ;; dummy - .byte 0x00,0x00 - ;; P8DDR - .byte 0xee,0xee - ;; P9DDR - .byte 0x00,0x00 - ;; PADDR - .byte 0x00,0x00 - ;; PBDDR - .byte 0x30,0x30 - -__target_name: - .asciz "H8MAX" - - .section .bootvec,"ax" - jmp @SYMBOL_NAME(_start) diff --git a/arch/h8300/platform/h8300h/h8max/timer.c b/arch/h8300/platform/h8300h/h8max/timer.c deleted file mode 100644 index 85a574afe9d..00000000000 --- a/arch/h8300/platform/h8300h/h8max/timer.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * linux/arch/h8300/platform/h8300h/h8max/timer.c - * - * Yoshinori Sato <ysato@users.sourcefoge.jp> - * - * Platform depend Timer Handler - * - */ - -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/timex.h> - -#include <asm/segment.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/regs306x.h> - -#define CMFA 6 - -#define CMIEA 0x40 -#define CCLR_CMA 0x08 -#define CLK_DIV8192 0x03 - -#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*1000/8192 /* Timer input freq. */ - -void __init platform_timer_setup(irqreturn_t (*timer_int)(int, void *, struct pt_regs *)) -{ - /* setup 8bit timer ch2 */ - ctrl_outb(H8300_TIMER_FREQ / HZ, TCORA2); /* set interval */ - ctrl_outb(0x00, _8TCSR2); /* no output */ - request_irq(40, timer_int, 0, "timer", 0); - ctrl_outb(CMIEA|CCLR_CMA|CLK_DIV8192, _8TCR2); /* start count */ -} - -void platform_timer_eoi(void) -{ - *(volatile unsigned char *)_8TCSR2 &= ~(1 << CMFA); -} - -void platform_gettod(int *year, int *mon, int *day, int *hour, - int *min, int *sec) -{ - *year = *mon = *day = *hour = *min = *sec = 0; -} - diff --git a/arch/h8300/platform/h8300h/irq.c b/arch/h8300/platform/h8300h/irq.c deleted file mode 100644 index e977345105d..00000000000 --- a/arch/h8300/platform/h8300h/irq.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * Interrupt handling H8/300H depend. - * Yoshinori Sato <ysato@users.sourceforge.jp> - * - */ - -#include <linux/init.h> -#include <linux/errno.h> - -#include <asm/ptrace.h> -#include <asm/traps.h> -#include <asm/irq.h> -#include <asm/io.h> -#include <asm/gpio.h> -#include <asm/regs306x.h> - -const int __initdata h8300_saved_vectors[] = { -#if defined(CONFIG_GDB_DEBUG) - TRAP3_VEC, /* TRAPA #3 is GDB breakpoint */ -#endif - -1, -}; - -const h8300_vector __initdata h8300_trap_table[] = { - 0, 0, 0, 0, 0, 0, 0, 0, - system_call, - 0, - 0, - trace_break, -}; - -int h8300_enable_irq_pin(unsigned int irq) -{ - int bitmask; - if (irq < EXT_IRQ0 || irq > EXT_IRQ5) - return 0; - - /* initialize IRQ pin */ - bitmask = 1 << (irq - EXT_IRQ0); - switch(irq) { - case EXT_IRQ0: - case EXT_IRQ1: - case EXT_IRQ2: - case EXT_IRQ3: - if (H8300_GPIO_RESERVE(H8300_GPIO_P8, bitmask) == 0) - return -EBUSY; - H8300_GPIO_DDR(H8300_GPIO_P8, bitmask, H8300_GPIO_INPUT); - break; - case EXT_IRQ4: - case EXT_IRQ5: - if (H8300_GPIO_RESERVE(H8300_GPIO_P9, bitmask) == 0) - return -EBUSY; - H8300_GPIO_DDR(H8300_GPIO_P9, bitmask, H8300_GPIO_INPUT); - break; - } - - return 0; -} - -void h8300_disable_irq_pin(unsigned int irq) -{ - int bitmask; - if (irq < EXT_IRQ0 || irq > EXT_IRQ5) - return; - - /* disable interrupt & release IRQ pin */ - bitmask = 1 << (irq - EXT_IRQ0); - switch(irq) { - case EXT_IRQ0: - case EXT_IRQ1: - case EXT_IRQ2: - case EXT_IRQ3: - *(volatile unsigned char *)IER &= ~bitmask; - H8300_GPIO_FREE(H8300_GPIO_P8, bitmask); - break ; - case EXT_IRQ4: - case EXT_IRQ5: - *(volatile unsigned char *)IER &= ~bitmask; - H8300_GPIO_FREE(H8300_GPIO_P9, bitmask); - break; - } -} diff --git a/arch/h8300/platform/h8300h/ptrace_h8300h.c b/arch/h8300/platform/h8300h/ptrace_h8300h.c deleted file mode 100644 index 746b1ae672a..00000000000 --- a/arch/h8300/platform/h8300h/ptrace_h8300h.c +++ /dev/null @@ -1,284 +0,0 @@ -/* - * linux/arch/h8300/platform/h8300h/ptrace_h8300h.c - * ptrace cpu depend helper functions - * - * Yoshinori Sato <ysato@users.sourceforge.jp> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of - * this archive for more details. - */ - -#include <linux/linkage.h> -#include <linux/sched.h> -#include <asm/ptrace.h> - -#define CCR_MASK 0x6f /* mode/imask not set */ -#define BREAKINST 0x5730 /* trapa #3 */ - -/* Mapping from PT_xxx to the stack offset at which the register is - saved. Notice that usp has no stack-slot and needs to be treated - specially (see get_reg/put_reg below). */ -static const int h8300_register_offset[] = { - PT_REG(er1), PT_REG(er2), PT_REG(er3), PT_REG(er4), - PT_REG(er5), PT_REG(er6), PT_REG(er0), PT_REG(orig_er0), - PT_REG(ccr), PT_REG(pc) -}; - -/* read register */ -long h8300_get_reg(struct task_struct *task, int regno) -{ - switch (regno) { - case PT_USP: - return task->thread.usp + sizeof(long)*2; - case PT_CCR: - return *(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]); - default: - return *(unsigned long *)(task->thread.esp0 + h8300_register_offset[regno]); - } -} - -/* write register */ -int h8300_put_reg(struct task_struct *task, int regno, unsigned long data) -{ - unsigned short oldccr; - switch (regno) { - case PT_USP: - task->thread.usp = data - sizeof(long)*2; - case PT_CCR: - oldccr = *(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]); - oldccr &= ~CCR_MASK; - data &= CCR_MASK; - data |= oldccr; - *(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]) = data; - break; - default: - *(unsigned long *)(task->thread.esp0 + h8300_register_offset[regno]) = data; - break; - } - return 0; -} - -/* disable singlestep */ -void h8300_disable_trace(struct task_struct *child) -{ - if((long)child->thread.breakinfo.addr != -1L) { - *child->thread.breakinfo.addr = child->thread.breakinfo.inst; - child->thread.breakinfo.addr = (unsigned short *)-1L; - } -} - -/* calculate next pc */ -enum jump_type {none, /* normal instruction */ - jabs, /* absolute address jump */ - ind, /* indirect address jump */ - ret, /* return to subrutine */ - reg, /* register indexed jump */ - relb, /* pc relative jump (byte offset) */ - relw, /* pc relative jump (word offset) */ - }; - -/* opcode decode table define - ptn: opcode pattern - msk: opcode bitmask - len: instruction length (<0 next table index) - jmp: jump operation mode */ -struct optable { - unsigned char bitpattern; - unsigned char bitmask; - signed char length; - signed char type; -} __attribute__((aligned(1),packed)); - -#define OPTABLE(ptn,msk,len,jmp) \ - { \ - .bitpattern = ptn, \ - .bitmask = msk, \ - .length = len, \ - .type = jmp, \ - } - -static const struct optable optable_0[] = { - OPTABLE(0x00,0xff, 1,none), /* 0x00 */ - OPTABLE(0x01,0xff,-1,none), /* 0x01 */ - OPTABLE(0x02,0xfe, 1,none), /* 0x02-0x03 */ - OPTABLE(0x04,0xee, 1,none), /* 0x04-0x05/0x14-0x15 */ - OPTABLE(0x06,0xfe, 1,none), /* 0x06-0x07 */ - OPTABLE(0x08,0xea, 1,none), /* 0x08-0x09/0x0c-0x0d/0x18-0x19/0x1c-0x1d */ - OPTABLE(0x0a,0xee, 1,none), /* 0x0a-0x0b/0x1a-0x1b */ - OPTABLE(0x0e,0xee, 1,none), /* 0x0e-0x0f/0x1e-0x1f */ - OPTABLE(0x10,0xfc, 1,none), /* 0x10-0x13 */ - OPTABLE(0x16,0xfe, 1,none), /* 0x16-0x17 */ - OPTABLE(0x20,0xe0, 1,none), /* 0x20-0x3f */ - OPTABLE(0x40,0xf0, 1,relb), /* 0x40-0x4f */ - OPTABLE(0x50,0xfc, 1,none), /* 0x50-0x53 */ - OPTABLE(0x54,0xfd, 1,ret ), /* 0x54/0x56 */ - OPTABLE(0x55,0xff, 1,relb), /* 0x55 */ - OPTABLE(0x57,0xff, 1,none), /* 0x57 */ - OPTABLE(0x58,0xfb, 2,relw), /* 0x58/0x5c */ - OPTABLE(0x59,0xfb, 1,reg ), /* 0x59/0x5b */ - OPTABLE(0x5a,0xfb, 2,jabs), /* 0x5a/0x5e */ - OPTABLE(0x5b,0xfb, 2,ind ), /* 0x5b/0x5f */ - OPTABLE(0x60,0xe8, 1,none), /* 0x60-0x67/0x70-0x77 */ - OPTABLE(0x68,0xfa, 1,none), /* 0x68-0x69/0x6c-0x6d */ - OPTABLE(0x6a,0xfe,-2,none), /* 0x6a-0x6b */ - OPTABLE(0x6e,0xfe, 2,none), /* 0x6e-0x6f */ - OPTABLE(0x78,0xff, 4,none), /* 0x78 */ - OPTABLE(0x79,0xff, 2,none), /* 0x79 */ - OPTABLE(0x7a,0xff, 3,none), /* 0x7a */ - OPTABLE(0x7b,0xff, 2,none), /* 0x7b */ - OPTABLE(0x7c,0xfc, 2,none), /* 0x7c-0x7f */ - OPTABLE(0x80,0x80, 1,none), /* 0x80-0xff */ -}; - -static const struct optable optable_1[] = { - OPTABLE(0x00,0xff,-3,none), /* 0x0100 */ - OPTABLE(0x40,0xf0,-3,none), /* 0x0140-0x14f */ - OPTABLE(0x80,0xf0, 1,none), /* 0x0180-0x018f */ - OPTABLE(0xc0,0xc0, 2,none), /* 0x01c0-0x01ff */ -}; - -static const struct optable optable_2[] = { - OPTABLE(0x00,0x20, 2,none), /* 0x6a0?/0x6a8?/0x6b0?/0x6b8? */ - OPTABLE(0x20,0x20, 3,none), /* 0x6a2?/0x6aa?/0x6b2?/0x6ba? */ -}; - -static const struct optable optable_3[] = { - OPTABLE(0x69,0xfb, 2,none), /* 0x010069/0x01006d/014069/0x01406d */ - OPTABLE(0x6b,0xff,-4,none), /* 0x01006b/0x01406b */ - OPTABLE(0x6f,0xff, 3,none), /* 0x01006f/0x01406f */ - OPTABLE(0x78,0xff, 5,none), /* 0x010078/0x014078 */ -}; - -static const struct optable optable_4[] = { - OPTABLE(0x00,0x78, 3,none), /* 0x0100690?/0x01006d0?/0140690/0x01406d0?/0x0100698?/0x01006d8?/0140698?/0x01406d8? */ - OPTABLE(0x20,0x78, 4,none), /* 0x0100692?/0x01006d2?/0140692/0x01406d2?/0x010069a?/0x01006da?/014069a?/0x01406da? */ -}; - -static const struct optables_list { - const struct optable *ptr; - int size; -} optables[] = { -#define OPTABLES(no) \ - { \ - .ptr = optable_##no, \ - .size = sizeof(optable_##no) / sizeof(struct optable), \ - } - OPTABLES(0), - OPTABLES(1), - OPTABLES(2), - OPTABLES(3), - OPTABLES(4), - -}; - -const unsigned char condmask[] = { - 0x00,0x40,0x01,0x04,0x02,0x08,0x10,0x20 -}; - -static int isbranch(struct task_struct *task,int reson) -{ - unsigned char cond = h8300_get_reg(task, PT_CCR); - /* encode complex conditions */ - /* B4: N^V - B5: Z|(N^V) - B6: C|Z */ - __asm__("bld #3,%w0\n\t" - "bxor #1,%w0\n\t" - "bst #4,%w0\n\t" - "bor #2,%w0\n\t" - "bst #5,%w0\n\t" - "bld #2,%w0\n\t" - "bor #0,%w0\n\t" - "bst #6,%w0\n\t" - :"=&r"(cond)::"cc"); - cond &= condmask[reson >> 1]; - if (!(reson & 1)) - return cond == 0; - else - return cond != 0; -} - -static unsigned short *getnextpc(struct task_struct *child, unsigned short *pc) -{ - const struct optable *op; - unsigned char *fetch_p; - unsigned char inst; - unsigned long addr; - unsigned long *sp; - int op_len,regno; - op = optables[0].ptr; - op_len = optables[0].size; - fetch_p = (unsigned char *)pc; - inst = *fetch_p++; - do { - if ((inst & op->bitmask) == op->bitpattern) { - if (op->length < 0) { - op = optables[-op->length].ptr; - op_len = optables[-op->length].size + 1; - inst = *fetch_p++; - } else { - switch (op->type) { - case none: - return pc + op->length; - case jabs: - addr = *(unsigned long *)pc; - return (unsigned short *)(addr & 0x00ffffff); - case ind: - addr = *pc & 0xff; - return (unsigned short *)(*(unsigned long *)addr); - case ret: - sp = (unsigned long *)h8300_get_reg(child, PT_USP); - /* user stack frames - | er0 | temporary saved - +--------+ - | exp | exception stack frames - +--------+ - | ret pc | userspace return address - */ - return (unsigned short *)(*(sp+2) & 0x00ffffff); - case reg: - regno = (*pc >> 4) & 0x07; - if (regno == 0) - addr = h8300_get_reg(child, PT_ER0); - else - addr = h8300_get_reg(child, regno-1+PT_ER1); - return (unsigned short *)addr; - case relb: - if (inst == 0x55 || isbranch(child,inst & 0x0f)) - pc = (unsigned short *)((unsigned long)pc + - ((signed char)(*fetch_p))); - return pc+1; /* skip myself */ - case relw: - if (inst == 0x5c || isbranch(child,(*fetch_p & 0xf0) >> 4)) - pc = (unsigned short *)((unsigned long)pc + - ((signed short)(*(pc+1)))); - return pc+2; /* skip myself */ - } - } - } else - op++; - } while(--op_len > 0); - return NULL; -} - -/* Set breakpoint(s) to simulate a single step from the current PC. */ - -void h8300_enable_trace(struct task_struct *child) -{ - unsigned short *nextpc; - nextpc = getnextpc(child,(unsigned short *)h8300_get_reg(child, PT_PC)); - child->thread.breakinfo.addr = nextpc; - child->thread.breakinfo.inst = *nextpc; - *nextpc = BREAKINST; -} - -asmlinkage void trace_trap(unsigned long bp) -{ - if ((unsigned long)current->thread.breakinfo.addr == bp) { - h8300_disable_trace(current); - force_sig(SIGTRAP,current); - } else - force_sig(SIGILL,current); -} - diff --git a/arch/h8300/platform/h8s/Makefile b/arch/h8300/platform/h8s/Makefile deleted file mode 100644 index bf124188376..00000000000 --- a/arch/h8300/platform/h8s/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for the linux kernel. -# -# Reuse any files we can from the H8S -# - -obj-y := ints_h8s.o ptrace_h8s.o diff --git a/arch/h8300/platform/h8s/edosk2674/Makefile b/arch/h8300/platform/h8s/edosk2674/Makefile deleted file mode 100644 index f763654ac6f..00000000000 --- a/arch/h8300/platform/h8s/edosk2674/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for the linux kernel. -# - -extra-y := crt0_$(MODEL).o -obj-y := timer.o diff --git a/arch/h8300/platform/h8s/edosk2674/crt0_ram.S b/arch/h8300/platform/h8s/edosk2674/crt0_ram.S deleted file mode 100644 index d12b0debe47..00000000000 --- a/arch/h8300/platform/h8s/edosk2674/crt0_ram.S +++ /dev/null @@ -1,130 +0,0 @@ -/* - * linux/arch/h8300/platform/h8s/edosk2674/crt0_ram.S - * - * Yoshinori Sato <ysato@users.sourceforge.jp> - * - * Platform depend startup - * Target Archtecture: EDOSK-2674 - * Memory Layout : RAM - */ - -#define ASSEMBLY - -#include <asm/linkage.h> -#include <asm/regs267x.h> - -#if !defined(CONFIG_BLKDEV_RESERVE) -#if defined(CONFIG_GDB_DEBUG) -#define RAMEND (__ramend - 0xc000) -#else -#define RAMEND __ramend -#endif -#else -#define RAMEND CONFIG_BLKDEV_RESERVE_ADDRESS -#endif - - .global SYMBOL_NAME(_start) - .global SYMBOL_NAME(_command_line) - .global SYMBOL_NAME(_platform_gpio_table) - .global SYMBOL_NAME(_target_name) - - .h8300s - - .section .text - .file "crt0_ram.S" - - /* CPU Reset entry */ -SYMBOL_NAME_LABEL(_start) - mov.l #RAMEND,sp - ldc #0x80,ccr - ldc #0x00,exr - - /* Peripheral Setup */ - bclr #4,@INTCR:8 /* interrupt mode 2 */ - bset #5,@INTCR:8 - bclr #0,@IER+1:16 - bset #1,@ISCRL+1:16 /* IRQ0 Positive Edge */ - bclr #0,@ISCRL+1:16 - -#if defined(CONFIG_MTD_UCLINUX) - /* move romfs image */ - jsr @__move_romfs -#endif - - /* .bss clear */ - mov.l #__sbss,er5 - mov.l er5,er6 - mov.l #__ebss,er4 - sub.l er5,er4 - shlr #2,er4 - sub.l er0,er0 -1: - mov.l er0,@er5 - adds #4,er5 - dec.l #1,er4 - bne 1b - - /* copy kernel commandline */ - mov.l #COMMAND_START,er5 - mov.l #SYMBOL_NAME(command_line),er6 - mov.w #512,r4 - eepmov.w - - /* uClinux kernel start */ - ldc #0x90,ccr /* running kernel */ - mov.l #SYMBOL_NAME(init_thread_union),sp - add.l #0x2000,sp - jsr @_start_kernel -_exit: - - jmp _exit - - rts - - /* I/O port assign information */ -__platform_gpio_table: - mov.l #gpio_table,er0 - rts - -gpio_table: - ;; P1DDR - ;; used,ddr - .byte 0x00,0x00 - ;; P2DDR - .byte 0x00,0x00 - ;; P3DDR - .byte 0x3f,0x3a - ;; dummy - .byte 0x00,0x00 - ;; P5DDR - .byte 0x00,0x00 - ;; P6DDR - .byte 0x00,0x00 - ;; P7DDR - .byte 0x00,0x00 - ;; P8DDR - .byte 0x00,0x00 - ;; dummy - .byte 0x00,0x00 - ;; PADDR - .byte 0xff,0xff - ;; PBDDR - .byte 0xff,0x00 - ;; PCDDR - .byte 0xff,0x00 - ;; PDDDR - .byte 0xff,0x00 - ;; PEDDR - .byte 0xff,0x00 - ;; PFDDR - .byte 0xff,0xff - ;; PGDDR - .byte 0x0f,0x0f - ;; PHDDR - .byte 0x0f,0x0f - -__target_name: - .asciz "EDOSK-2674" - - .section .bootvec,"ax" - jmp @SYMBOL_NAME(_start) diff --git a/arch/h8300/platform/h8s/edosk2674/crt0_rom.S b/arch/h8300/platform/h8s/edosk2674/crt0_rom.S deleted file mode 100644 index c03d23c6fe1..00000000000 --- a/arch/h8300/platform/h8s/edosk2674/crt0_rom.S +++ /dev/null @@ -1,186 +0,0 @@ -/* - * linux/arch/h8300/platform/h8s/edosk2674/crt0_rom.S - * - * Yoshinori Sato <ysato@users.sourceforge.jp> - * - * Platform depend startup - * Target Archtecture: EDOSK-2674 - * Memory Layout : ROM - */ - -#define ASSEMBLY - -#include <asm/linkage.h> -#include <asm/regs267x.h> - - .global SYMBOL_NAME(_start) - .global SYMBOL_NAME(_command_line) - .global SYMBOL_NAME(_platform_gpio_table) - .global SYMBOL_NAME(_target_name) - - .h8300s - .section .text - .file "crt0_rom.S" - - /* CPU Reset entry */ -SYMBOL_NAME_LABEL(_start) - mov.l #__ramend,sp - ldc #0x80,ccr - ldc #0,exr - - /* Peripheral Setup */ -;BSC/GPIO setup - mov.l #init_regs,er0 - mov.w #0xffff,e2 -1: - mov.w @er0+,r2 - beq 2f - mov.w @er0+,r1 - mov.b r1l,@er2 - bra 1b - -2: -;SDRAM setup -#define SDRAM_SMR 0x400040 - - mov.b #0,r0l - mov.b r0l,@DRACCR:16 - mov.w #0x188,r0 - mov.w r0,@REFCR:16 - mov.w #0x85b4,r0 - mov.w r0,@DRAMCR:16 - mov.b #0,r1l - mov.b r1l,@SDRAM_SMR - mov.w #0x84b4,r0 - mov.w r0,@DRAMCR:16 -;special thanks to Arizona Cooperative Power - - /* copy .data */ - mov.l #__begin_data,er5 - mov.l #__sdata,er6 - mov.l #__edata,er4 - sub.l er6,er4 - shlr.l #2,er4 -1: - mov.l @er5+,er0 - mov.l er0,@er6 - adds #4,er6 - dec.l #1,er4 - bne 1b - - /* .bss clear */ - mov.l #__sbss,er5 - mov.l #__ebss,er4 - sub.l er5,er4 - shlr.l #2,er4 - sub.l er0,er0 -1: - mov.l er0,@er5 - adds #4,er5 - dec.l #1,er4 - bne 1b - - /* copy kernel commandline */ - mov.l #COMMAND_START,er5 - mov.l #SYMBOL_NAME(_command_line),er6 - mov.w #512,r4 - eepmov.w - - /* linux kernel start */ - ldc #0x90,ccr /* running kernel */ - mov.l #SYMBOL_NAME(init_thread_union),sp - add.l #0x2000,sp - jsr @_start_kernel -_exit: - - jmp _exit - - rts - - /* I/O port assign information */ -__platform_gpio_table: - mov.l #gpio_table,er0 - rts - -#define INIT_REGS_DATA(REGS,DATA) \ - .word ((REGS) & 0xffff),DATA - -init_regs: -INIT_REGS_DATA(ASTCR,0xff) -INIT_REGS_DATA(RDNCR,0x00) -INIT_REGS_DATA(ABWCR,0x80) -INIT_REGS_DATA(WTCRAH,0x27) -INIT_REGS_DATA(WTCRAL,0x77) -INIT_REGS_DATA(WTCRBH,0x71) -INIT_REGS_DATA(WTCRBL,0x22) -INIT_REGS_DATA(CSACRH,0x80) -INIT_REGS_DATA(CSACRL,0x80) -INIT_REGS_DATA(BROMCRH,0xa0) -INIT_REGS_DATA(BROMCRL,0xa0) -INIT_REGS_DATA(P3DDR,0x3a) -INIT_REGS_DATA(P3ODR,0x06) -INIT_REGS_DATA(PADDR,0xff) -INIT_REGS_DATA(PFDDR,0xfe) -INIT_REGS_DATA(PGDDR,0x0f) -INIT_REGS_DATA(PHDDR,0x0f) -INIT_REGS_DATA(PFCR0,0xff) -INIT_REGS_DATA(PFCR2,0x0d) -INIT_REGS_DATA(ITSR, 0x00) -INIT_REGS_DATA(ITSR+1,0x3f) -INIT_REGS_DATA(INTCR,0x20) - - .word 0 - -gpio_table: - ;; P1DDR - .byte 0x00,0x00 - ;; P2DDR - .byte 0x00,0x00 - ;; P3DDR - .byte 0x00,0x00 - ;; dummy - .byte 0x00,0x00 - ;; P5DDR - .byte 0x00,0x00 - ;; P6DDR - .byte 0x00,0x00 - ;; P7DDR - .byte 0x00,0x00 - ;; P8DDR - .byte 0x00,0x00 - ;; dummy - .byte 0x00,0x00 - ;; PADDR - .byte 0x00,0x00 - ;; PBDDR - .byte 0x00,0x00 - ;; PCDDR - .byte 0x00,0x00 - ;; PDDDR - .byte 0x00,0x00 - ;; PEDDR - .byte 0x00,0x00 - ;; PFDDR - .byte 0x00,0x00 - ;; PGDDR - .byte 0x00,0x00 - ;; PHDDR - .byte 0x00,0x00 - - .section .rodata -__target_name: - .asciz "EDOSK-2674" - - .section .bss -__command_line: - .space 512 - - /* interrupt vector */ - .section .vectors,"ax" - .long __start - .long __start -vector = 2 - .rept 126 - .long _interrupt_redirect_table+vector*4 -vector = vector + 1 - .endr diff --git a/arch/h8300/platform/h8s/edosk2674/timer.c b/arch/h8300/platform/h8s/edosk2674/timer.c deleted file mode 100644 index bfb1424482f..00000000000 --- a/arch/h8300/platform/h8s/edosk2674/timer.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * linux/arch/h8300/platform/h8s/edosk2674/timer.c - * - * Yoshinori Sato <ysato@users.sourceforge.jp> - * - * Platform depend Timer Handler - * - */ - -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/timex.h> - -#include <asm/segment.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/regs267x.h> - -#define CMFA 6 - -#define CMIEA 0x40 -#define CCLR_CMA 0x08 -#define CLK_DIV8192 0x03 - -#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*1000/8192 /* Timer input freq. */ - -void __init platform_timer_setup(irqreturn_t (*timer_int)(int, void *, struct pt_regs *)) -{ - /* 8bit timer module enabled */ - ctrl_outb(ctrl_inb(MSTPCRL) & ~0x01, MSTPCRL); - /* setup 8bit timer ch1 */ - ctrl_outb(H8300_TIMER_FREQ / HZ, _8TCORA1); /* set interval */ - ctrl_outb(0x00, _8TCSR1); /* no output */ - request_irq(76, timer_int, 0, "timer" ,0); - ctrl_outb(CMIEA|CCLR_CMA|CLK_DIV8192, _8TCR1); /* start count */ -} - -void platform_timer_eoi(void) -{ - *(volatile unsigned char *)_8TCSR1 &= ~(1 << CMFA); -} - -void platform_gettod(int *year, int *mon, int *day, int *hour, - int *min, int *sec) -{ -/* FIXME! not RTC support */ - *year = *mon = *day = *hour = *min = *sec = 0; -} diff --git a/arch/h8300/platform/h8s/generic/Makefile b/arch/h8300/platform/h8s/generic/Makefile deleted file mode 100644 index 055d53a9811..00000000000 --- a/arch/h8300/platform/h8s/generic/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for the linux kernel. -# - -extra-y = crt0_$(MODEL).o -obj-y := timer.o diff --git a/arch/h8300/platform/h8s/generic/crt0_ram.S b/arch/h8300/platform/h8s/generic/crt0_ram.S deleted file mode 100644 index b0454106997..00000000000 --- a/arch/h8300/platform/h8s/generic/crt0_ram.S +++ /dev/null @@ -1,127 +0,0 @@ -/* - * linux/arch/h8300/platform/h8s/edosk2674/crt0_ram.S - * - * Yoshinori Sato <ysato@users.sourceforge.jp> - * - * Platform depend startup - * Target Archtecture: generic - * Memory Layout : RAM - */ - -#define ASSEMBLY - -#include <asm/linkage.h> -#include <asm/regs267x.h> - -#if !defined(CONFIG_BLKDEV_RESERVE) -#if defined(CONFIG_GDB_DEBUG) -#define RAMEND (__ramend - 0xc000) -#else -#define RAMEND __ramend -#endif -#else -#define RAMEND CONFIG_BLKDEV_RESERVE_ADDRESS -#endif - - .global SYMBOL_NAME(_start) - .global SYMBOL_NAME(_command_line) - .global SYMBOL_NAME(_platform_gpio_table) - .global SYMBOL_NAME(_target_name) - - .h8300s - - .section .text - .file "crt0_ram.S" - - /* CPU Reset entry */ -SYMBOL_NAME_LABEL(_start) - mov.l #RAMEND,sp - ldc #0x80,ccr - ldc #0x00,exr - - /* Peripheral Setup */ - bclr #4,@INTCR:8 /* interrupt mode 2 */ - bset #5,@INTCR:8 - -#if defined(CONFIG_MTD_UCLINUX) - /* move romfs image */ - jsr @__move_romfs -#endif - - /* .bss clear */ - mov.l #__sbss,er5 - mov.l er5,er6 - mov.l #__ebss,er4 - sub.l er5,er4 - shlr #2,er4 - sub.l er0,er0 -1: - mov.l er0,@er5 - adds #4,er5 - dec.l #1,er4 - bne 1b - - /* copy kernel commandline */ - mov.l #COMMAND_START,er5 - mov.l #SYMBOL_NAME(command_line),er6 - mov.w #512,r4 - eepmov.w - - /* uClinux kernel start */ - ldc #0x90,ccr /* running kernel */ - mov.l #SYMBOL_NAME(init_thread_union),sp - add.l #0x2000,sp - jsr @_start_kernel -_exit: - - jmp _exit - - rts - - /* I/O port assign information */ -__platform_gpio_table: - mov.l #gpio_table,er0 - rts - -gpio_table: - ;; P1DDR - ;; used,ddr - .byte 0x00,0x00 - ;; P2DDR - .byte 0x00,0x00 - ;; P3DDR - .byte 0x00,0x00 - ;; dummy - .byte 0x00,0x00 - ;; P5DDR - .byte 0x00,0x00 - ;; P6DDR - .byte 0x00,0x00 - ;; P7DDR - .byte 0x00,0x00 - ;; P8DDR - .byte 0x00,0x00 - ;; dummy - .byte 0x00,0x00 - ;; PADDR - .byte 0x00,0x00 - ;; PBDDR - .byte 0x00,0x00 - ;; PCDDR - .byte 0x00,0x00 - ;; PDDDR - .byte 0x00,0x00 - ;; PEDDR - .byte 0x00,0x00 - ;; PFDDR - .byte 0x00,0x00 - ;; PGDDR - .byte 0x00,0x00 - ;; PHDDR - .byte 0x00,0x00 - -__target_name: - .asciz "generic" - - .section .bootvec,"ax" - jmp @SYMBOL_NAME(_start) diff --git a/arch/h8300/platform/h8s/generic/crt0_rom.S b/arch/h8300/platform/h8s/generic/crt0_rom.S deleted file mode 100644 index 95b6f2898f5..00000000000 --- a/arch/h8300/platform/h8s/generic/crt0_rom.S +++ /dev/null @@ -1,128 +0,0 @@ -/* - * linux/arch/h8300/platform/h8s/generic/crt0_rom.S - * - * Yoshinori Sato <ysato@users.sourceforge.jp> - * - * Platform depend startup - * Target Archtecture: generic - * Memory Layout : ROM - */ - -#define ASSEMBLY - -#include <asm/linkage.h> -#include <asm/regs267x.h> - - .global SYMBOL_NAME(_start) - .global SYMBOL_NAME(_command_line) - .global SYMBOL_NAME(_platform_gpio_table) - .global SYMBOL_NAME(_target_name) - - .h8300s - .section .text - .file "crt0_rom.S" - - /* CPU Reset entry */ -SYMBOL_NAME_LABEL(_start) - mov.l #__ramend,sp - ldc #0x80,ccr - ldc #0,exr - bclr #4,@INTCR:8 - bset #5,@INTCR:8 /* Interrupt mode 2 */ - - /* Peripheral Setup */ - - /* copy .data */ -#if !defined(CONFIG_H8S_SIM) - mov.l #__begin_data,er5 - mov.l #__sdata,er6 - mov.l #__edata,er4 - sub.l er6,er4 - shlr.l #2,er4 -1: - mov.l @er5+,er0 - mov.l er0,@er6 - adds #4,er6 - dec.l #1,er4 - bne 1b -#endif - - /* .bss clear */ - mov.l #__sbss,er5 - mov.l #__ebss,er4 - sub.l er5,er4 - shlr.l #2,er4 - sub.l er0,er0 -1: - mov.l er0,@er5 - adds #4,er5 - dec.l #1,er4 - bne 1b - - /* linux kernel start */ - ldc #0x90,ccr /* running kernel */ - mov.l #SYMBOL_NAME(init_thread_union),sp - add.l #0x2000,sp - jsr @_start_kernel -_exit: - - jmp _exit - - rts - - /* I/O port assign information */ -__platform_gpio_table: - mov.l #gpio_table,er0 - rts - -gpio_table: - ;; P1DDR - .byte 0x00,0x00 - ;; P2DDR - .byte 0x00,0x00 - ;; P3DDR - .byte 0x00,0x00 - ;; P4DDR - .byte 0x00,0x00 - ;; P5DDR - .byte 0x00,0x00 - ;; P6DDR - .byte 0x00,0x00 - ;; dummy - .byte 0x00,0x00 - ;; P8DDR - .byte 0x00,0x00 - ;; PADDR - .byte 0x00,0x00 - ;; PBDDR - .byte 0x00,0x00 - ;; PCDDR - .byte 0x00,0x00 - ;; PDDDR - .byte 0x00,0x00 - ;; PEDDR - .byte 0x00,0x00 - ;; PFDDR - .byte 0x00,0x00 - ;; PGDDR - .byte 0x00,0x00 - ;; PHDDR - .byte 0x00,0x00 - - .section .rodata -__target_name: - .asciz "generic" - - .section .bss -__command_line: - .space 512 - - /* interrupt vector */ - .section .vectors,"ax" - .long __start - .long __start -vector = 2 - .rept 126-1 - .long _interrupt_redirect_table+vector*4 -vector = vector + 1 - .endr diff --git a/arch/h8300/platform/h8s/generic/timer.c b/arch/h8300/platform/h8s/generic/timer.c deleted file mode 100644 index c2211c6e79d..00000000000 --- a/arch/h8300/platform/h8s/generic/timer.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * linux/arch/h8300/platform/h8s/generic/timer.c - * - * Yoshinori Sato <ysato@users.sourceforge.jp> - * - * Platform depend Timer Handler - * - */ - -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/timex.h> - -#include <asm/segment.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/regs267x.h> - -#define CMFA 6 - -#define CMIEA 0x40 -#define CCLR_CMA 0x08 -#define CLK_DIV8192 0x03 - -#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*1000/8192 /* Timer input freq. */ - -void __init platform_timer_setup(irqreturn_t (*timer_int)(int, void *, struct pt_regs *)) -{ - /* 8bit timer module enabled */ - ctrl_outb(ctrl_inb(MSTPCRL) & ~0x01, MSTPCRL); - /* setup 8bit timer ch1 */ - ctrl_outb(H8300_TIMER_FREQ / HZ, _8TCORA1); /* set interval */ - ctrl_outb(0x00, _8TCSR1); /* no output */ - request_irq(76, timer_int, 0, "timer" ,0); - ctrl_outb(CMIEA|CCLR_CMA|CLK_DIV8192, _8TCR1); /* start count */ -} - -void platform_timer_eoi(void) -{ - *(volatile unsigned char *)_8TCSR1 &= ~(1 << CMFA); -} - -void platform_gettod(int *year, int *mon, int *day, int *hour, - int *min, int *sec) -{ - *year = *mon = *day = *hour = *min = *sec = 0; -} diff --git a/arch/h8300/platform/h8s/irq.c b/arch/h8300/platform/h8s/irq.c deleted file mode 100644 index 8182f041f82..00000000000 --- a/arch/h8300/platform/h8s/irq.c +++ /dev/null @@ -1,104 +0,0 @@ -/* - * linux/arch/h8300/platform/h8s/ints_h8s.c - * Interrupt handling CPU variants - * - * Yoshinori Sato <ysato@users.sourceforge.jp> - * - */ - -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/kernel.h> - -#include <asm/ptrace.h> -#include <asm/traps.h> -#include <asm/irq.h> -#include <asm/io.h> -#include <asm/gpio.h> -#include <asm/regs267x.h> - -/* saved vector list */ -const int __initdata h8300_saved_vectors[]={ -#if defined(CONFIG_GDB_DEBUG) - TRACE_VEC, - TRAP3_VEC, -#endif - -1 -}; - -/* trap entry table */ -const H8300_VECTOR __initdata h8300_trap_table[] = { - 0,0,0,0,0, - trace_break, /* TRACE */ - 0,0, - system_call, /* TRAPA #0 */ - 0,0,0,0,0,0,0 -}; - -/* IRQ pin assignment */ -struct irq_pins { - unsigned char port_no; - unsigned char bit_no; -} __attribute__((aligned(1),packed)); -/* ISTR = 0 */ -static const struct irq_pins irq_assign_table0[16]={ - {H8300_GPIO_P5,H8300_GPIO_B0},{H8300_GPIO_P5,H8300_GPIO_B1}, - {H8300_GPIO_P5,H8300_GPIO_B2},{H8300_GPIO_P5,H8300_GPIO_B3}, - {H8300_GPIO_P5,H8300_GPIO_B4},{H8300_GPIO_P5,H8300_GPIO_B5}, - {H8300_GPIO_P5,H8300_GPIO_B6},{H8300_GPIO_P5,H8300_GPIO_B7}, - {H8300_GPIO_P6,H8300_GPIO_B0},{H8300_GPIO_P6,H8300_GPIO_B1}, - {H8300_GPIO_P6,H8300_GPIO_B2},{H8300_GPIO_P6,H8300_GPIO_B3}, - {H8300_GPIO_P6,H8300_GPIO_B4},{H8300_GPIO_P6,H8300_GPIO_B5}, - {H8300_GPIO_PF,H8300_GPIO_B1},{H8300_GPIO_PF,H8300_GPIO_B2}, -}; -/* ISTR = 1 */ -static const struct irq_pins irq_assign_table1[16]={ - {H8300_GPIO_P8,H8300_GPIO_B0},{H8300_GPIO_P8,H8300_GPIO_B1}, - {H8300_GPIO_P8,H8300_GPIO_B2},{H8300_GPIO_P8,H8300_GPIO_B3}, - {H8300_GPIO_P8,H8300_GPIO_B4},{H8300_GPIO_P8,H8300_GPIO_B5}, - {H8300_GPIO_PH,H8300_GPIO_B2},{H8300_GPIO_PH,H8300_GPIO_B3}, - {H8300_GPIO_P2,H8300_GPIO_B0},{H8300_GPIO_P2,H8300_GPIO_B1}, - {H8300_GPIO_P2,H8300_GPIO_B2},{H8300_GPIO_P2,H8300_GPIO_B3}, - {H8300_GPIO_P2,H8300_GPIO_B4},{H8300_GPIO_P2,H8300_GPIO_B5}, - {H8300_GPIO_P2,H8300_GPIO_B6},{H8300_GPIO_P2,H8300_GPIO_B7}, -}; - -/* IRQ to GPIO pin translation */ -#define IRQ_GPIO_MAP(irqbit,irq,port,bit) \ -do { \ - if (*(volatile unsigned short *)ITSR & irqbit) { \ - port = irq_assign_table1[irq - EXT_IRQ0].port_no; \ - bit = irq_assign_table1[irq - EXT_IRQ0].bit_no; \ - } else { \ - port = irq_assign_table0[irq - EXT_IRQ0].port_no; \ - bit = irq_assign_table0[irq - EXT_IRQ0].bit_no; \ - } \ -} while(0) - -int h8300_enable_irq_pin(unsigned int irq) -{ - if (irq >= EXT_IRQ0 && irq <= EXT_IRQ15) { - unsigned short ptn = 1 << (irq - EXT_IRQ0); - unsigned int port_no,bit_no; - IRQ_GPIO_MAP(ptn, irq, port_no, bit_no); - if (H8300_GPIO_RESERVE(port_no, bit_no) == 0) - return -EBUSY; /* pin already use */ - H8300_GPIO_DDR(port_no, bit_no, H8300_GPIO_INPUT); - *(volatile unsigned short *)ISR &= ~ptn; /* ISR clear */ - } - - return 0; -} - -void h8300_disable_irq_pin(unsigned int irq) -{ - if (irq >= EXT_IRQ0 && irq <= EXT_IRQ15) { - /* disable interrupt & release IRQ pin */ - unsigned short ptn = 1 << (irq - EXT_IRQ0); - unsigned short port_no,bit_no; - *(volatile unsigned short *)ISR &= ~ptn; - *(volatile unsigned short *)IER &= ~ptn; - IRQ_GPIO_MAP(ptn, irq, port_no, bit_no); - H8300_GPIO_FREE(port_no, bit_no); - } -} diff --git a/arch/h8300/platform/h8s/ptrace_h8s.c b/arch/h8300/platform/h8s/ptrace_h8s.c deleted file mode 100644 index e8cd46f9255..00000000000 --- a/arch/h8300/platform/h8s/ptrace_h8s.c +++ /dev/null @@ -1,84 +0,0 @@ -/* - * linux/arch/h8300/platform/h8s/ptrace_h8s.c - * ptrace cpu depend helper functions - * - * Yoshinori Sato <ysato@users.sourceforge.jp> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of - * this archive for more details. - */ - -#include <linux/linkage.h> -#include <linux/sched.h> -#include <linux/errno.h> -#include <asm/ptrace.h> - -#define CCR_MASK 0x6f -#define EXR_TRACE 0x80 - -/* Mapping from PT_xxx to the stack offset at which the register is - saved. Notice that usp has no stack-slot and needs to be treated - specially (see get_reg/put_reg below). */ -static const int h8300_register_offset[] = { - PT_REG(er1), PT_REG(er2), PT_REG(er3), PT_REG(er4), - PT_REG(er5), PT_REG(er6), PT_REG(er0), PT_REG(orig_er0), - PT_REG(ccr), PT_REG(pc), 0, PT_REG(exr) -}; - -/* read register */ -long h8300_get_reg(struct task_struct *task, int regno) -{ - switch (regno) { - case PT_USP: - return task->thread.usp + sizeof(long)*2 + 2; - case PT_CCR: - case PT_EXR: - return *(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]); - default: - return *(unsigned long *)(task->thread.esp0 + h8300_register_offset[regno]); - } -} - -/* write register */ -int h8300_put_reg(struct task_struct *task, int regno, unsigned long data) -{ - unsigned short oldccr; - switch (regno) { - case PT_USP: - task->thread.usp = data - sizeof(long)*2 - 2; - case PT_CCR: - oldccr = *(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]); - oldccr &= ~CCR_MASK; - data &= CCR_MASK; - data |= oldccr; - *(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]) = data; - break; - case PT_EXR: - /* exr modify not support */ - return -EIO; - default: - *(unsigned long *)(task->thread.esp0 + h8300_register_offset[regno]) = data; - break; - } - return 0; -} - -/* disable singlestep */ -void h8300_disable_trace(struct task_struct *child) -{ - *(unsigned short *)(child->thread.esp0 + h8300_register_offset[PT_EXR]) &= ~EXR_TRACE; -} - -/* enable singlestep */ -void h8300_enable_trace(struct task_struct *child) -{ - *(unsigned short *)(child->thread.esp0 + h8300_register_offset[PT_EXR]) |= EXR_TRACE; -} - -asmlinkage void trace_trap(unsigned long bp) -{ - (void)bp; - force_sig(SIGTRAP,current); -} - |