aboutsummaryrefslogtreecommitdiff
path: root/arch/cris
diff options
context:
space:
mode:
Diffstat (limited to 'arch/cris')
-rw-r--r--arch/cris/arch-v10/Kconfig2
-rw-r--r--arch/cris/arch-v10/drivers/Kconfig2
-rw-r--r--arch/cris/arch-v32/drivers/Kconfig8
3 files changed, 6 insertions, 6 deletions
diff --git a/arch/cris/arch-v10/Kconfig b/arch/cris/arch-v10/Kconfig
index 44eb1b9accb..c7ea9efd010 100644
--- a/arch/cris/arch-v10/Kconfig
+++ b/arch/cris/arch-v10/Kconfig
@@ -323,7 +323,7 @@ config ETRAX_DEF_R_WAITSTATES
depends on ETRAX_ARCH_V10
default "95a6"
help
- Waitstates for SRAM, Flash and peripherials (not DRAM). 95f8 is a
+ Waitstates for SRAM, Flash and peripherals (not DRAM). 95f8 is a
good choice for most Axis products...
config ETRAX_DEF_R_BUS_CONFIG
diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig
index 734d5f3a530..e7e724bc0ba 100644
--- a/arch/cris/arch-v10/drivers/Kconfig
+++ b/arch/cris/arch-v10/drivers/Kconfig
@@ -839,7 +839,7 @@ config ETRAX_DS1302_TRICKLE_CHARGE
default "0"
help
This controls the initial value of the trickle charge register.
- 0 = disabled (use this if you are unsure or have a non rechargable battery)
+ 0 = disabled (use this if you are unsure or have a non rechargeable battery)
Otherwise the following values can be OR:ed together to control the
charge current:
1 = 2kohm, 2 = 4kohm, 3 = 4kohm
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index a33097f9536..f64624fc450 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -88,7 +88,7 @@ config ETRAX_SERIAL_PORT0_DMA7_IN
help
Enables the DMA7 input channel for ser0 (ttyS0).
If you do not enable DMA, an interrupt for each character will be
- used when receiveing data.
+ used when receiving data.
Normally you want to use DMA, unless you use the DMA channel for
something else.
@@ -157,7 +157,7 @@ config ETRAX_SERIAL_PORT1_DMA5_IN
help
Enables the DMA5 input channel for ser1 (ttyS1).
If you do not enable DMA, an interrupt for each character will be
- used when receiveing data.
+ used when receiving data.
Normally you want this on, unless you use the DMA channel for
something else.
@@ -228,7 +228,7 @@ config ETRAX_SERIAL_PORT2_DMA3_IN
help
Enables the DMA3 input channel for ser2 (ttyS2).
If you do not enable DMA, an interrupt for each character will be
- used when receiveing data.
+ used when receiving data.
Normally you want to use DMA, unless you use the DMA channel for
something else.
@@ -297,7 +297,7 @@ config ETRAX_SERIAL_PORT3_DMA9_IN
help
Enables the DMA9 input channel for ser3 (ttyS3).
If you do not enable DMA, an interrupt for each character will be
- used when receiveing data.
+ used when receiving data.
Normally you want to use DMA, unless you use the DMA channel for
something else.