diff options
Diffstat (limited to 'arch/cris/arch-v10/drivers/Kconfig')
| -rw-r--r-- | arch/cris/arch-v10/drivers/Kconfig | 181 |
1 files changed, 0 insertions, 181 deletions
diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig index 96740ef497d..58f5864a668 100644 --- a/arch/cris/arch-v10/drivers/Kconfig +++ b/arch/cris/arch-v10/drivers/Kconfig @@ -9,37 +9,6 @@ config ETRAX_ETHERNET This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet controller. -choice - prompt "Network LED behavior" - depends on ETRAX_ETHERNET - default ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY - -config ETRAX_NETWORK_LED_ON_WHEN_LINK - bool "LED_on_when_link" - help - Selecting LED_on_when_link will light the LED when there is a - connection and will flash off when there is activity. - - Selecting LED_on_when_activity will light the LED only when - there is activity. - - This setting will also affect the behaviour of other activity LEDs - e.g. Bluetooth. - -config ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY - bool "LED_on_when_activity" - help - Selecting LED_on_when_link will light the LED when there is a - connection and will flash off when there is activity. - - Selecting LED_on_when_activity will light the LED only when - there is activity. - - This setting will also affect the behaviour of other activity LEDs - e.g. Bluetooth. - -endchoice - config ETRAX_SERIAL bool "Serial-port support" depends on ETRAX_ARCH_V10 @@ -84,32 +53,6 @@ config ETRAX_SERIAL_PORT0 the same DMA channels. choice - prompt "Ser0 DMA out assignment" - depends on ETRAX_SERIAL_PORT0 - default ETRAX_SERIAL_PORT0_DMA6_OUT - -config ETRAX_SERIAL_PORT0_NO_DMA_OUT - bool "No DMA out" - -config ETRAX_SERIAL_PORT0_DMA6_OUT - bool "DMA 6" - -endchoice - -choice - prompt "Ser0 DMA in assignment" - depends on ETRAX_SERIAL_PORT0 - default ETRAX_SERIAL_PORT0_DMA7_IN - -config ETRAX_SERIAL_PORT0_NO_DMA_IN - bool "No DMA in" - -config ETRAX_SERIAL_PORT0_DMA7_IN - bool "DMA 7" - -endchoice - -choice prompt "Ser0 DTR, RI, DSR and CD assignment" depends on ETRAX_SERIAL_PORT0 default ETRAX_SER0_DTR_RI_DSR_CD_ON_NONE @@ -198,32 +141,6 @@ config ETRAX_SERIAL_PORT1 Enables the ETRAX 100 serial driver for ser1 (ttyS1). choice - prompt "Ser1 DMA out assignment" - depends on ETRAX_SERIAL_PORT1 - default ETRAX_SERIAL_PORT1_DMA8_OUT - -config ETRAX_SERIAL_PORT1_NO_DMA_OUT - bool "No DMA out" - -config ETRAX_SERIAL_PORT1_DMA8_OUT - bool "DMA 8" - -endchoice - -choice - prompt "Ser1 DMA in assignment" - depends on ETRAX_SERIAL_PORT1 - default ETRAX_SERIAL_PORT1_DMA9_IN - -config ETRAX_SERIAL_PORT1_NO_DMA_IN - bool "No DMA in" - -config ETRAX_SERIAL_PORT1_DMA9_IN - bool "DMA 9" - -endchoice - -choice prompt "Ser1 DTR, RI, DSR and CD assignment" depends on ETRAX_SERIAL_PORT1 default ETRAX_SER1_DTR_RI_DSR_CD_ON_NONE @@ -315,32 +232,6 @@ config ETRAX_SERIAL_PORT2 Enables the ETRAX 100 serial driver for ser2 (ttyS2). choice - prompt "Ser2 DMA out assignment" - depends on ETRAX_SERIAL_PORT2 - default ETRAX_SERIAL_PORT2_DMA2_OUT - -config ETRAX_SERIAL_PORT2_NO_DMA_OUT - bool "No DMA out" - -config ETRAX_SERIAL_PORT2_DMA2_OUT - bool "DMA 2" - -endchoice - -choice - prompt "Ser2 DMA in assignment" - depends on ETRAX_SERIAL_PORT2 - default ETRAX_SERIAL_PORT2_DMA3_IN - -config ETRAX_SERIAL_PORT2_NO_DMA_IN - bool "No DMA in" - -config ETRAX_SERIAL_PORT2_DMA3_IN - bool "DMA 3" - -endchoice - -choice prompt "Ser2 DTR, RI, DSR and CD assignment" depends on ETRAX_SERIAL_PORT2 default ETRAX_SER2_DTR_RI_DSR_CD_ON_NONE @@ -429,32 +320,6 @@ config ETRAX_SERIAL_PORT3 Enables the ETRAX 100 serial driver for ser3 (ttyS3). choice - prompt "Ser3 DMA out assignment" - depends on ETRAX_SERIAL_PORT3 - default ETRAX_SERIAL_PORT3_DMA4_OUT - -config ETRAX_SERIAL_PORT3_NO_DMA_OUT - bool "No DMA out" - -config ETRAX_SERIAL_PORT3_DMA4_OUT - bool "DMA 4" - -endchoice - -choice - prompt "Ser3 DMA in assignment" - depends on ETRAX_SERIAL_PORT3 - default ETRAX_SERIAL_PORT3_DMA5_IN - -config ETRAX_SERIAL_PORT3_NO_DMA_IN - bool "No DMA in" - -config ETRAX_SERIAL_PORT3_DMA5_IN - bool "DMA 5" - -endchoice - -choice prompt "Ser3 DTR, RI, DSR and CD assignment" depends on ETRAX_SERIAL_PORT3 default ETRAX_SER3_DTR_RI_DSR_CD_ON_NONE @@ -563,21 +428,6 @@ config ETRAX_USB_HOST_PORT2 depends on ETRAX_USB_HOST default n -config ETRAX_AXISFLASHMAP - bool "Axis flash-map support" - depends on ETRAX_ARCH_V10 - select MTD - select MTD_CFI - select MTD_CFI_AMDSTD - select MTD_CHAR - select MTD_BLOCK - select MTD_PARTITIONS - select MTD_CONCAT - select MTD_COMPLEX_MAPPINGS - help - This option enables MTD mapping of flash devices. Needed to use - flash memories. If unsure, say Y. - config ETRAX_PTABLE_SECTOR int "Byte-offset of partition table sector" depends on ETRAX_AXISFLASHMAP @@ -731,37 +581,6 @@ config ETRAX_PB_CHANGEABLE_BITS Bit set = changeable. You probably want 00 here. -config ETRAX_RTC - bool "Real Time Clock support" - depends on ETRAX_ARCH_V10 - help - Enables drivers for the Real-Time Clock battery-backed chips on - some products. The kernel reads the time when booting, and - the date can be set using ioctl(fd, RTC_SET_TIME, &rt) with rt a - rtc_time struct (see <file:include/asm-cris/rtc.h>) on the /dev/rtc - device, major 121. You can check the time with cat /proc/rtc, but - normal time reading should be done using libc function time and - friends. - -choice - prompt "RTC chip" - depends on ETRAX_RTC - default ETRAX_DS1302 - -config ETRAX_DS1302 - bool "DS1302" - help - Enables the driver for the DS1302 Real-Time Clock battery-backed - chip on some products. - -config ETRAX_PCF8563 - bool "PCF8563" - help - Enables the driver for the PCF8563 Real-Time Clock battery-backed - chip on some products. - -endchoice - config ETRAX_DS1302_RST_ON_GENERIC_PORT bool "DS1302 RST on Generic Port" depends on ETRAX_DS1302 |