1 files changed, 111 insertions, 0 deletions
diff --git a/arch/cris/arch-v10/boot/compressed/head.S b/arch/cris/arch-v10/boot/compressed/head.S
new file mode 100644
index 00000000000..4cbdd4b1d9d
--- /dev/null
+++ b/arch/cris/arch-v10/boot/compressed/head.S
@@ -0,0 +1,111 @@
+/*
+ *  arch/cris/boot/compressed/head.S
+ *
+ *  Copyright (C) 1999, 2001 Axis Communications AB
+ *
+ *  Code that sets up the DRAM registers, calls the
+ *  decompressor to unpack the piggybacked kernel, and jumps.
+ *
+ */
+
+#include <linux/config.h>
+#define ASSEMBLER_MACROS_ONLY
+#include <asm/arch/sv_addr_ag.h>
+
+#define RAM_INIT_MAGIC 0x56902387
+	
+	;; Exported symbols
+	
+	.globl	_input_data
+
+	
+	.text
+
+	nop
+	di
+
+;; We need to initialze DRAM registers before we start using the DRAM
+	
+	cmp.d	RAM_INIT_MAGIC, r8	; Already initialized?
+	beq	dram_init_finished
+	nop
+	
+#include "../../lib/dram_init.S"
+	
+dram_init_finished:	
+		
+	;; Initiate the PA and PB ports
+
+	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DATA, r0
+	move.b   r0, [R_PORT_PA_DATA]
+
+	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DIR, r0
+	move.b   r0, [R_PORT_PA_DIR]
+
+	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DATA, r0
+	move.b   r0, [R_PORT_PB_DATA]
+
+	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DIR, r0
+	move.b   r0, [R_PORT_PB_DIR]
+
+	;; Setup the stack to a suitably high address.
+	;; We assume 8 MB is the minimum DRAM in an eLinux
+	;; product and put the sp at the top for now.
+
+	move.d	0x40800000, sp
+
+	;; Figure out where the compressed piggyback image is
+	;; in the flash (since we wont try to copy it to DRAM
+	;; before unpacking). It is at _edata, but in flash.
+	;; Use (_edata - basse) as offset to the current PC.
+	
+basse:	move.d	pc, r5
+	and.d	0x7fffffff, r5	; strip any non-cache bit
+	subq	2, r5		; compensate for the move.d pc instr
+	move.d	r5, r0		; save for later - flash address of 'basse'
+	add.d	_edata, r5
+	sub.d	basse, r5	; r5 = flash address of '_edata'
+	
+	;; Copy text+data to DRAM
+	
+	move.d	basse, r1	; destination
+	move.d	_edata, r2	; end destination
+1:	move.w	[r0+], r3
+	move.w	r3, [r1+]
+	cmp.d	r2, r1
+	bcs	1b
+	nop
+
+	move.d	r5, [_input_data] ; for the decompressor
+
+
+	;; Clear the decompressors BSS (between _edata and _end)
+	
+	moveq	0, r0
+	move.d	_edata, r1
+	move.d	_end, r2
+1:	move.w	r0, [r1+]
+	cmp.d	r2, r1
+	bcs	1b
+	nop
+	
+	;; Do the decompression and save compressed size in _inptr
+
+	jsr	_decompress_kernel
+	
+	;; Put start address of root partition in r9 so the kernel can use it
+	;; when mounting from flash
+
+	move.d	[_input_data], r9	; flash address of compressed kernel
+	add.d	[_inptr], r9		; size of compressed kernel
+	 
+	;; Enter the decompressed kernel
+	move.d	RAM_INIT_MAGIC, r8	; Tell kernel that DRAM is initialized
+	jump	0x40004000	; kernel is linked to this address
+	
+	.data
+
+_input_data:
+	.dword	0		; used by the decompressor
+
+#include "../../lib/hw_settings.S"